[PATCH v4 00/11] Input: support for STM FTS5

[PATCH v4 00/11] Input: support for STM FTS5

[David Heidelberg via B4 Relay]

Used on various phones. Minimal viable driver.

Includes device-tree enabling touchscreen on Pixel 3.

What is missing:
 - switching between AP and SLPI mode (to be able to wake up phone by touch)
 - firmware loading
 - anything above basic touch

Signed-off-by: David Heidelberg <david@ixit.cz>
---
Changes in v4:
- Wrap everything below enabling the supplies into stmfts_configure()
  to avoid bunch of gotos to power off on error (Dmitry T.)
- Finished chip specific ops and removed is_fts5. (Dmitry T.)
- Link to v3: https://lore.kernel.org/r/20260403-stmfts5-v3-0-5da768cfd201@ixit.cz

Changes in v3:
- s/touchscreen_pins/touchscreen_irq_n. (Konrad)
- Use interrupts-extended. (Konrad)
- Fixed rebase conflict against 8665ceb926ec ("Input: stmfts - use guard notation when acquiring mutex")
- Rename switch-gpios to mode-switch-gpios.
- Do not define properties in if:then: branches. (Krzysztof)
- Link to v2: https://lore.kernel.org/r/20260315-stmfts5-v2-0-70bc83ee9591@ixit.cz

Changes in v2:
- Fix typo in the binding s/switch-gpio/switch-gpios/.
- Deduplacate allOf. (Rob yamllint)
- Add missing S-off-by. (Dmitry B.)
- Dropped irq-gpios as it's not needed. (Konrad)
- Correct x and y touchscreen area size. (Konrad)
- Correct reset introduction commit description. (Krzysztof)
- Partially implemented chip specific ops. (Dmitry T.)
- Separeted license naming cleanup into separate commit (Dmitry T.)
- Link to v1: https://lore.kernel.org/r/20260301-stmfts5-v1-0-22c458b9ac68@ixit.cz

---
David Heidelberg (7):
      Input: stmfts - Fix the MODULE_LICENSE() string
      Input: stmfts - Use dev struct directly
      Input: stmfts - Switch to devm_regulator_bulk_get_const
      Input: stmfts - abstract reading information from the firmware
      Input: stmfts - disable regulators when power on fails
      dt-bindings: input: touchscreen: st,stmfts: Introduce reset GPIO
      dt-bindings: input: touchscreen: st,stmfts: Introduce STM FTS5

Petr Hodina (4):
      Input: stmfts - use client to make future code cleaner
      Input: stmfts - add optional reset GPIO support
      Input: stmfts - support FTS5
      arm64: dts: qcom: sdm845-google: Add STM FTS touchscreen support

 .../bindings/input/touchscreen/st,stmfts.yaml      |  19 +-
 .../arm64/boot/dts/qcom/sdm845-google-blueline.dts |  19 +-
 arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi |   2 +-
 drivers/input/touchscreen/stmfts.c                 | 601 +++++++++++++++++++--
 4 files changed, 580 insertions(+), 61 deletions(-)
---
base-commit: db7efce4ae23ad5e42f5f55428f529ff62b86fab
change-id: 20260214-stmfts5-b47311fbd732

Best regards,
-- 
David Heidelberg <david@ixit.cz>

[PATCH v4 01/11] Input: stmfts - Fix the MODULE_LICENSE() string

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

Replace the bogus "GPL v2" with "GPL" as MODULE_LICNSE() string. The
value does not declare the module's exact license, but only lets the
module loader test whether the module is Free Software or not.

See commit bf7fbeeae6db ("module: Cure the MODULE_LICENSE "GPL" vs.
"GPL v2" bogosity") in the details of the issue. The fix is to use
"GPL" for all modules under any variant of the GPL.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/input/touchscreen/stmfts.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index 8af87d0b6eb64..def6bd0c8e059 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -807,4 +807,4 @@ module_i2c_driver(stmfts_driver);
 
 MODULE_AUTHOR("Andi Shyti <andi.shyti@samsung.com>");
 MODULE_DESCRIPTION("STMicroelectronics FTS Touch Screen");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

-- 
2.53.0

[PATCH v4 02/11] Input: stmfts - Use dev struct directly

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

Makes the code better readable and noticably shorter.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/input/touchscreen/stmfts.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index def6bd0c8e059..7b1e975a85668 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -619,6 +619,7 @@ static int stmfts_enable_led(struct stmfts_data *sdata)
 
 static int stmfts_probe(struct i2c_client *client)
 {
+	struct device *dev = &client->dev;
 	int err;
 	struct stmfts_data *sdata;
 
@@ -627,7 +628,7 @@ static int stmfts_probe(struct i2c_client *client)
 						I2C_FUNC_SMBUS_I2C_BLOCK))
 		return -ENODEV;
 
-	sdata = devm_kzalloc(&client->dev, sizeof(*sdata), GFP_KERNEL);
+	sdata = devm_kzalloc(dev, sizeof(*sdata), GFP_KERNEL);
 	if (!sdata)
 		return -ENOMEM;
 
@@ -639,13 +640,13 @@ static int stmfts_probe(struct i2c_client *client)
 
 	sdata->regulators[STMFTS_REGULATOR_VDD].supply = "vdd";
 	sdata->regulators[STMFTS_REGULATOR_AVDD].supply = "avdd";
-	err = devm_regulator_bulk_get(&client->dev,
+	err = devm_regulator_bulk_get(dev,
 				      ARRAY_SIZE(sdata->regulators),
 				      sdata->regulators);
 	if (err)
 		return err;
 
-	sdata->input = devm_input_allocate_device(&client->dev);
+	sdata->input = devm_input_allocate_device(dev);
 	if (!sdata->input)
 		return -ENOMEM;
 
@@ -664,7 +665,7 @@ static int stmfts_probe(struct i2c_client *client)
 	input_set_abs_params(sdata->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
 	input_set_abs_params(sdata->input, ABS_DISTANCE, 0, 255, 0, 0);
 
-	sdata->use_key = device_property_read_bool(&client->dev,
+	sdata->use_key = device_property_read_bool(dev,
 						   "touch-key-connected");
 	if (sdata->use_key) {
 		input_set_capability(sdata->input, EV_KEY, KEY_MENU);
@@ -685,20 +686,20 @@ static int stmfts_probe(struct i2c_client *client)
 	 * interrupts. To be on the safe side it's better to not enable
 	 * the interrupts during their request.
 	 */
-	err = devm_request_threaded_irq(&client->dev, client->irq,
+	err = devm_request_threaded_irq(dev, client->irq,
 					NULL, stmfts_irq_handler,
 					IRQF_ONESHOT | IRQF_NO_AUTOEN,
 					"stmfts_irq", sdata);
 	if (err)
 		return err;
 
-	dev_dbg(&client->dev, "initializing ST-Microelectronics FTS...\n");
+	dev_dbg(dev, "initializing ST-Microelectronics FTS...\n");
 
 	err = stmfts_power_on(sdata);
 	if (err)
 		return err;
 
-	err = devm_add_action_or_reset(&client->dev, stmfts_power_off, sdata);
+	err = devm_add_action_or_reset(dev, stmfts_power_off, sdata);
 	if (err)
 		return err;
 
@@ -715,13 +716,13 @@ static int stmfts_probe(struct i2c_client *client)
 			 * without LEDs. The ledvdd regulator pointer will be
 			 * used as a flag.
 			 */
-			dev_warn(&client->dev, "unable to use touchkey leds\n");
+			dev_warn(dev, "unable to use touchkey leds\n");
 			sdata->ledvdd = NULL;
 		}
 	}
 
-	pm_runtime_enable(&client->dev);
-	device_enable_async_suspend(&client->dev);
+	pm_runtime_enable(dev);
+	device_enable_async_suspend(dev);
 
 	return 0;
 }

-- 
2.53.0

[PATCH v4 03/11] Input: stmfts - Switch to devm_regulator_bulk_get_const

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

Switch to devm_regulator_bulk_get_const() to stop setting the supplies
list in probe(), and move the regulator_bulk_data struct in static const.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/input/touchscreen/stmfts.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)

diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index 7b1e975a85668..ff884e04ad4c8 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -69,9 +69,9 @@
 #define STMFTS_MAX_FINGERS	10
 #define STMFTS_DEV_NAME		"stmfts"
 
-enum stmfts_regulators {
-	STMFTS_REGULATOR_VDD,
-	STMFTS_REGULATOR_AVDD,
+static const struct regulator_bulk_data stmfts_supplies[] = {
+	{ .supply = "vdd" },
+	{ .supply = "avdd" },
 };
 
 struct stmfts_data {
@@ -82,7 +82,7 @@ struct stmfts_data {
 
 	struct touchscreen_properties prop;
 
-	struct regulator_bulk_data regulators[2];
+	struct regulator_bulk_data *supplies;
 
 	/*
 	 * Presence of ledvdd will be used also to check
@@ -523,8 +523,8 @@ static int stmfts_power_on(struct stmfts_data *sdata)
 	int err;
 	u8 reg[8];
 
-	err = regulator_bulk_enable(ARRAY_SIZE(sdata->regulators),
-				    sdata->regulators);
+	err = regulator_bulk_enable(ARRAY_SIZE(stmfts_supplies),
+				    sdata->supplies);
 	if (err)
 		return err;
 
@@ -589,8 +589,8 @@ static void stmfts_power_off(void *data)
 	struct stmfts_data *sdata = data;
 
 	disable_irq(sdata->client->irq);
-	regulator_bulk_disable(ARRAY_SIZE(sdata->regulators),
-						sdata->regulators);
+	regulator_bulk_disable(ARRAY_SIZE(stmfts_supplies),
+			       sdata->supplies);
 }
 
 static int stmfts_enable_led(struct stmfts_data *sdata)
@@ -638,11 +638,10 @@ static int stmfts_probe(struct i2c_client *client)
 	mutex_init(&sdata->mutex);
 	init_completion(&sdata->cmd_done);
 
-	sdata->regulators[STMFTS_REGULATOR_VDD].supply = "vdd";
-	sdata->regulators[STMFTS_REGULATOR_AVDD].supply = "avdd";
-	err = devm_regulator_bulk_get(dev,
-				      ARRAY_SIZE(sdata->regulators),
-				      sdata->regulators);
+	err = devm_regulator_bulk_get_const(dev,
+					    ARRAY_SIZE(stmfts_supplies),
+					    stmfts_supplies,
+					    &sdata->supplies);
 	if (err)
 		return err;
 

-- 
2.53.0

[PATCH v4 04/11] Input: stmfts - abstract reading information from the firmware

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

Improves readability and makes splitting power on function in following
commit easier.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/input/touchscreen/stmfts.c | 36 ++++++++++++++++++++++++------------
 1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index ff884e04ad4c8..71d9b747ccfc5 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -518,22 +518,11 @@ static struct attribute *stmfts_sysfs_attrs[] = {
 };
 ATTRIBUTE_GROUPS(stmfts_sysfs);
 
-static int stmfts_power_on(struct stmfts_data *sdata)
+static int stmfts_read_system_info(struct stmfts_data *sdata)
 {
 	int err;
 	u8 reg[8];
 
-	err = regulator_bulk_enable(ARRAY_SIZE(stmfts_supplies),
-				    sdata->supplies);
-	if (err)
-		return err;
-
-	/*
-	 * The datasheet does not specify the power on time, but considering
-	 * that the reset time is < 10ms, I sleep 20ms to be sure
-	 */
-	msleep(20);
-
 	err = i2c_smbus_read_i2c_block_data(sdata->client, STMFTS_READ_INFO,
 					    sizeof(reg), reg);
 	if (err < 0)
@@ -547,6 +536,29 @@ static int stmfts_power_on(struct stmfts_data *sdata)
 	sdata->config_id = reg[4];
 	sdata->config_ver = reg[5];
 
+	return 0;
+}
+
+static int stmfts_power_on(struct stmfts_data *sdata)
+{
+	int err;
+
+	err = regulator_bulk_enable(ARRAY_SIZE(stmfts_supplies),
+				    sdata->supplies);
+	if (err)
+		return err;
+
+	/*
+	 * The datasheet does not specify the power on time, but considering
+	 * that the reset time is < 10ms, I sleep 20ms to be sure
+	 */
+	msleep(20);
+
+
+	err = stmfts_read_system_info(sdata);
+	if (err)
+		return err;
+
 	enable_irq(sdata->client->irq);
 
 	msleep(50);

-- 
2.53.0

[PATCH v4 05/11] Input: stmfts - disable regulators when power on fails

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

We must power off regulators after failing at power on phase.
Create stmfts_configure function, so we don't have to use goto.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/input/touchscreen/stmfts.c | 37 ++++++++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 13 deletions(-)

diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index 71d9b747ccfc5..290511dd69437 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -539,22 +539,10 @@ static int stmfts_read_system_info(struct stmfts_data *sdata)
 	return 0;
 }
 
-static int stmfts_power_on(struct stmfts_data *sdata)
+static int stmfts_configure(struct stmfts_data *sdata)
 {
 	int err;
 
-	err = regulator_bulk_enable(ARRAY_SIZE(stmfts_supplies),
-				    sdata->supplies);
-	if (err)
-		return err;
-
-	/*
-	 * The datasheet does not specify the power on time, but considering
-	 * that the reset time is < 10ms, I sleep 20ms to be sure
-	 */
-	msleep(20);
-
-
 	err = stmfts_read_system_info(sdata);
 	if (err)
 		return err;
@@ -596,6 +584,29 @@ static int stmfts_power_on(struct stmfts_data *sdata)
 	return 0;
 }
 
+static int stmfts_power_on(struct stmfts_data *sdata)
+{
+	int err;
+
+	err = regulator_bulk_enable(ARRAY_SIZE(stmfts_supplies),
+				    sdata->supplies);
+	if (err)
+		return err;
+
+	/*
+	 * The datasheet does not specify the power on time, but considering
+	 * that the reset time is < 10ms, I sleep 20ms to be sure
+	 */
+	msleep(20);
+
+	err = stmfts_configure(sdata);
+	if (err)
+		regulator_bulk_disable(ARRAY_SIZE(stmfts_supplies),
+				       sdata->supplies);
+
+	return err;
+}
+
 static void stmfts_power_off(void *data)
 {
 	struct stmfts_data *sdata = data;

-- 
2.53.0

[PATCH v4 06/11] Input: stmfts - use client to make future code cleaner

[David Heidelberg via B4 Relay]

From: Petr Hodina <petr.hodina@protonmail.com>

Make code cleaner, compiler will optimize it away anyway.

Preparation for FTM5 support, where more steps are needed.

Signed-off-by: Petr Hodina <petr.hodina@protonmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/input/touchscreen/stmfts.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index 290511dd69437..b61a19e954296 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -769,9 +769,10 @@ static int stmfts_runtime_suspend(struct device *dev)
 static int stmfts_runtime_resume(struct device *dev)
 {
 	struct stmfts_data *sdata = dev_get_drvdata(dev);
+	struct i2c_client *client = sdata->client;
 	int ret;
 
-	ret = i2c_smbus_write_byte(sdata->client, STMFTS_SLEEP_OUT);
+	ret = i2c_smbus_write_byte(client, STMFTS_SLEEP_OUT);
 	if (ret)
 		dev_err(dev, "failed to resume device: %d\n", ret);
 

-- 
2.53.0

[PATCH v4 07/11] dt-bindings: input: touchscreen: st,stmfts: Introduce reset GPIO

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

FTS has associated reset GPIO, document it.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
index 12256ae7df90d..64c4f24ea3dd0 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
@@ -40,6 +40,10 @@ properties:
   vdd-supply:
     description: Power supply
 
+  reset-gpios:
+    description: Reset GPIO (active-low)
+    maxItems: 1
+
 required:
   - compatible
   - reg

-- 
2.53.0

[PATCH v4 08/11] Input: stmfts - add optional reset GPIO support

[David Heidelberg via B4 Relay]

From: Petr Hodina <petr.hodina@protonmail.com>

Add support for an optional "reset-gpios" property. If present, the
driver drives the reset line high at probe time and releases it during
power-on, after the regulators have been enabled.

Signed-off-by: Petr Hodina <petr.hodina@protonmail.com>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/input/touchscreen/stmfts.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index b61a19e954296..1e6d9a287cd0c 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -77,6 +77,7 @@ static const struct regulator_bulk_data stmfts_supplies[] = {
 struct stmfts_data {
 	struct i2c_client *client;
 	struct input_dev *input;
+	struct gpio_desc *reset_gpio;
 	struct led_classdev led_cdev;
 	struct mutex mutex;
 
@@ -539,6 +540,15 @@ static int stmfts_read_system_info(struct stmfts_data *sdata)
 	return 0;
 }
 
+static void stmfts_reset(struct stmfts_data *sdata)
+{
+	gpiod_set_value_cansleep(sdata->reset_gpio, 1);
+	msleep(20);
+
+	gpiod_set_value_cansleep(sdata->reset_gpio, 0);
+	msleep(50);
+}
+
 static int stmfts_configure(struct stmfts_data *sdata)
 {
 	int err;
@@ -599,6 +609,9 @@ static int stmfts_power_on(struct stmfts_data *sdata)
 	 */
 	msleep(20);
 
+	if (sdata->reset_gpio)
+		stmfts_reset(sdata);
+
 	err = stmfts_configure(sdata);
 	if (err)
 		regulator_bulk_disable(ARRAY_SIZE(stmfts_supplies),
@@ -612,6 +625,10 @@ static void stmfts_power_off(void *data)
 	struct stmfts_data *sdata = data;
 
 	disable_irq(sdata->client->irq);
+
+	if (sdata->reset_gpio)
+		gpiod_set_value_cansleep(sdata->reset_gpio, 1);
+
 	regulator_bulk_disable(ARRAY_SIZE(stmfts_supplies),
 			       sdata->supplies);
 }
@@ -668,6 +685,12 @@ static int stmfts_probe(struct i2c_client *client)
 	if (err)
 		return err;
 
+	sdata->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						    GPIOD_OUT_HIGH);
+	if (IS_ERR(sdata->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(sdata->reset_gpio),
+				     "Failed to get GPIO 'reset'\n");
+
 	sdata->input = devm_input_allocate_device(dev);
 	if (!sdata->input)
 		return -ENOMEM;

-- 
2.53.0

[PATCH v4 09/11] dt-bindings: input: touchscreen: st,stmfts: Introduce STM FTS5

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

Introduce more recent STM FTS5 touchscreen support.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 .../devicetree/bindings/input/touchscreen/st,stmfts.yaml  | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
index 64c4f24ea3dd0..441fc92b9a4ed 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
@@ -16,10 +16,19 @@ description:
 
 allOf:
   - $ref: touchscreen.yaml#
+  - if:
+      properties:
+        compatible:
+          const: st,stmfts5
+    then:
+      required:
+        - mode-switch-gpios
 
 properties:
   compatible:
-    const: st,stmfts
+    enum:
+      - st,stmfts
+      - st,stmfts5
 
   reg:
     maxItems: 1
@@ -40,6 +49,10 @@ properties:
   vdd-supply:
     description: Power supply
 
+  mode-switch-gpios:
+    description: Switch between touchscreen SLPI and AP mode.
+    maxItems: 1
+
   reset-gpios:
     description: Reset GPIO (active-low)
     maxItems: 1

-- 
2.53.0

[PATCH v4 10/11] Input: stmfts - support FTS5

[David Heidelberg via B4 Relay]

From: Petr Hodina <petr.hodina@protonmail.com>

FTS support SLPI and AP mode, introduce mode-switch GPIO to switch between
those two. Currently we can handle only full power AP mode, so we just
keep the AP on.

Useful for devices like Pixel 3 (blueline) and many others.

Signed-off-by: Petr Hodina <petr.hodina@protonmail.com>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/input/touchscreen/stmfts.c | 494 ++++++++++++++++++++++++++++++++++---
 1 file changed, 466 insertions(+), 28 deletions(-)

diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index 1e6d9a287cd0c..e613299e37557 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -1,8 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
-// STMicroelectronics FTS Touchscreen device driver
-//
-// Copyright (c) 2017 Samsung Electronics Co., Ltd.
-// Copyright (c) 2017 Andi Shyti <andi@etezian.org>
+/* STMicroelectronics FTS Touchscreen device driver
+ *
+ * Copyright 2017 Samsung Electronics Co., Ltd.
+ * Copyright 2017 Andi Shyti <andi@etezian.org>
+ * Copyright David Heidelberg <david@ixit.cz>
+ * Copyright Petr Hodina <petr.hodina@protonmail.com>
+ */
 
 #include <linux/delay.h>
 #include <linux/i2c.h>
@@ -12,6 +15,7 @@
 #include <linux/irq.h>
 #include <linux/leds.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 
@@ -34,6 +38,7 @@
 #define STMFTS_FULL_FORCE_CALIBRATION		0xa2
 #define STMFTS_MS_CX_TUNING			0xa3
 #define STMFTS_SS_CX_TUNING			0xa4
+#define STMFTS5_SET_SCAN_MODE			0xa0
 
 /* events */
 #define STMFTS_EV_NO_EVENT			0x00
@@ -51,12 +56,32 @@
 #define STMFTS_EV_STATUS			0x16
 #define STMFTS_EV_DEBUG				0xdb
 
+/* events FTS5 */
+#define STMFTS5_EV_CONTROLLER_READY		0x03
+/* FTM5 event IDs (full byte, not masked) */
+#define STMFTS5_EV_MULTI_TOUCH_ENTER		0x13
+#define STMFTS5_EV_MULTI_TOUCH_MOTION		0x23
+#define STMFTS5_EV_MULTI_TOUCH_LEAVE		0x33
+#define STMFTS5_EV_STATUS_UPDATE		0x43
+#define STMFTS5_EV_USER_REPORT			0x53
+#define STMFTS5_EV_DEBUG			0xe3
+#define STMFTS5_EV_ERROR			0xf3
+
 /* multi touch related event masks */
 #define STMFTS_MASK_EVENT_ID			0x0f
 #define STMFTS_MASK_TOUCH_ID			0xf0
 #define STMFTS_MASK_LEFT_EVENT			0x0f
 #define STMFTS_MASK_X_MSB			0x0f
 #define STMFTS_MASK_Y_LSB			0xf0
+#define STMFTS5_MASK_TOUCH_TYPE			0x0f
+
+/* touch type classifications */
+#define STMFTS_TOUCH_TYPE_INVALID		0x00
+#define STMFTS_TOUCH_TYPE_FINGER		0x01
+#define STMFTS_TOUCH_TYPE_GLOVE			0x02
+#define STMFTS_TOUCH_TYPE_STYLUS		0x03
+#define STMFTS_TOUCH_TYPE_PALM			0x04
+#define STMFTS_TOUCH_TYPE_HOVER			0x05
 
 /* key related event masks */
 #define STMFTS_MASK_KEY_NO_TOUCH		0x00
@@ -75,9 +100,12 @@ static const struct regulator_bulk_data stmfts_supplies[] = {
 };
 
 struct stmfts_data {
+	const struct stmfts_chip_ops *ops;
+
 	struct i2c_client *client;
 	struct input_dev *input;
 	struct gpio_desc *reset_gpio;
+	struct gpio_desc *mode_switch_gpio;
 	struct led_classdev led_cdev;
 	struct mutex mutex;
 
@@ -101,12 +129,27 @@ struct stmfts_data {
 
 	struct completion cmd_done;
 
+	unsigned long touch_id;
+	unsigned long stylus_id;
+
 	bool use_key;
 	bool led_status;
 	bool hover_enabled;
+	bool stylus_enabled;
 	bool running;
 };
 
+struct stmfts_chip_ops {
+	int  (*configure)(struct stmfts_data *sdata);
+	void (*power_off)(struct stmfts_data *sdata);
+	int  (*setup_input)(struct stmfts_data *sdata);
+	int  (*input_open)(struct input_dev *dev);
+	void (*input_close)(struct input_dev *dev);
+	void (*parse_events)(struct stmfts_data *sdata);
+	int  (*set_hover)(struct stmfts_data *sdata, bool enable);
+	int  (*runtime_resume)(struct stmfts_data *sdata);
+};
+
 static int stmfts_brightness_set(struct led_classdev *led_cdev,
 					enum led_brightness value)
 {
@@ -169,6 +212,7 @@ static int stmfts_read_events(struct stmfts_data *sdata)
 	return ret == ARRAY_SIZE(msgs) ? 0 : -EIO;
 }
 
+/* FTS4 event handling functions */
 static void stmfts_report_contact_event(struct stmfts_data *sdata,
 					const u8 event[])
 {
@@ -204,6 +248,157 @@ static void stmfts_report_contact_release(struct stmfts_data *sdata,
 	input_sync(sdata->input);
 }
 
+/* FTS5 event handling functions */
+static void stmfts5_report_contact_event(struct stmfts_data *sdata,
+					 const u8 event[])
+{
+	u8 area;
+	u8 maj;
+	u8 min;
+	/* FTM5 event format:
+	 * event[0] = event ID (0x13/0x23)
+	 * event[1] = touch type (low 4 bits) | touch ID (high 4 bits)
+	 * event[2] = X LSB
+	 * event[3] = X MSB (low 4 bits) | Y MSB (high 4 bits)
+	 * event[4] = Y LSB
+	 * event[5] = pressure
+	 * event[6] = major (low 4 bits) | minor (high 4 bits)
+	 * event[7] = minor (high 2 bits)
+	 */
+	u8 touch_id = (event[1] & STMFTS_MASK_TOUCH_ID) >> 4;
+	u8 touch_type = event[1] & STMFTS5_MASK_TOUCH_TYPE;
+	int x, y, distance;
+	unsigned int tool = MT_TOOL_FINGER;
+	bool touch_condition = true;
+
+	/* Parse coordinates with better precision */
+	x = (((int)event[3] & STMFTS_MASK_X_MSB) << 8) | event[2];
+	y = ((int)event[4] << 4) | ((event[3] & STMFTS_MASK_Y_LSB) >> 4);
+
+	/* Parse pressure - ensure non-zero for active touch */
+	area = event[5];
+	if (area <= 0 && touch_type != STMFTS_TOUCH_TYPE_HOVER) {
+		/* Should not happen for contact events. Set minimum pressure
+		 * to prevent touch from being dropped
+		 */
+		dev_warn_once(&sdata->client->dev,
+			      "zero pressure on contact event, slot %d\n", touch_id);
+		area = 1;
+	}
+
+	/* Parse touch area with improved bit extraction */
+	maj = (((event[0] & 0x0C) << 2) | ((event[6] & 0xF0) >> 4));
+	min = (((event[7] & 0xC0) >> 2) | (event[6] & 0x0F));
+
+	/* Distance is 0 for touching, max for hovering */
+	distance = 0;
+
+	/* Classify touch type and set appropriate tool and parameters */
+	switch (touch_type) {
+	case STMFTS_TOUCH_TYPE_STYLUS:
+		if (sdata->stylus_enabled) {
+			tool = MT_TOOL_PEN;
+			__set_bit(touch_id, &sdata->stylus_id);
+			__clear_bit(touch_id, &sdata->touch_id);
+			break;
+		}
+		fallthrough; /* Report as finger if stylus not enabled */
+
+	case STMFTS_TOUCH_TYPE_FINGER:
+	case STMFTS_TOUCH_TYPE_GLOVE:
+		tool = MT_TOOL_FINGER;
+		__set_bit(touch_id, &sdata->touch_id);
+		__clear_bit(touch_id, &sdata->stylus_id);
+		break;
+
+	case STMFTS_TOUCH_TYPE_PALM:
+		/* Palm touch - report but can be filtered by userspace */
+		tool = MT_TOOL_PALM;
+		__set_bit(touch_id, &sdata->touch_id);
+		__clear_bit(touch_id, &sdata->stylus_id);
+		break;
+
+	case STMFTS_TOUCH_TYPE_HOVER:
+		tool = MT_TOOL_FINGER;
+		touch_condition = false;
+		area = 0;
+		distance = 255;
+		__set_bit(touch_id, &sdata->touch_id);
+		__clear_bit(touch_id, &sdata->stylus_id);
+		break;
+
+	case STMFTS_TOUCH_TYPE_INVALID:
+	default:
+		dev_warn(&sdata->client->dev,
+			 "invalid touch type %d for slot %d\n",
+			 touch_type, touch_id);
+		return;
+	}
+
+	/* Boundary check - some devices report max value, adjust */
+	if (x >= sdata->prop.max_x)
+		x = sdata->prop.max_x - 1;
+	if (y >= sdata->prop.max_y)
+		y = sdata->prop.max_y - 1;
+
+	input_mt_slot(sdata->input, touch_id);
+	input_report_key(sdata->input, BTN_TOUCH, touch_condition);
+	input_mt_report_slot_state(sdata->input, tool, true);
+
+	input_report_abs(sdata->input, ABS_MT_POSITION_X, x);
+	input_report_abs(sdata->input, ABS_MT_POSITION_Y, y);
+	input_report_abs(sdata->input, ABS_MT_TOUCH_MAJOR, maj);
+	input_report_abs(sdata->input, ABS_MT_TOUCH_MINOR, min);
+	input_report_abs(sdata->input, ABS_MT_PRESSURE, area);
+	input_report_abs(sdata->input, ABS_MT_DISTANCE, distance);
+
+	input_sync(sdata->input);
+}
+
+static void stmfts5_report_contact_release(struct stmfts_data *sdata,
+					   const u8 event[])
+{
+	/* FTM5 format: touch ID is in high 4 bits of event[1] */
+	u8 touch_id = (event[1] & STMFTS_MASK_TOUCH_ID) >> 4;
+	u8 touch_type = event[1] & STMFTS5_MASK_TOUCH_TYPE;
+	unsigned int tool = MT_TOOL_FINGER;
+
+	/* Determine tool type based on touch classification */
+	switch (touch_type) {
+	case STMFTS_TOUCH_TYPE_STYLUS:
+		if (sdata->stylus_enabled) {
+			tool = MT_TOOL_PEN;
+			__clear_bit(touch_id, &sdata->stylus_id);
+		} else {
+			__clear_bit(touch_id, &sdata->touch_id);
+		}
+		break;
+
+	case STMFTS_TOUCH_TYPE_PALM:
+		tool = MT_TOOL_PALM;
+		__clear_bit(touch_id, &sdata->touch_id);
+		break;
+
+	case STMFTS_TOUCH_TYPE_FINGER:
+	case STMFTS_TOUCH_TYPE_GLOVE:
+	case STMFTS_TOUCH_TYPE_HOVER:
+	default:
+		tool = MT_TOOL_FINGER;
+		__clear_bit(touch_id, &sdata->touch_id);
+		break;
+	}
+
+	input_mt_slot(sdata->input, touch_id);
+	input_report_abs(sdata->input, ABS_MT_PRESSURE, 0);
+	input_mt_report_slot_state(sdata->input, tool, false);
+
+	/* Report BTN_TOUCH only if no touches remain */
+	if (!sdata->touch_id && !sdata->stylus_id)
+		input_report_key(sdata->input, BTN_TOUCH, 0);
+
+	input_sync(sdata->input);
+}
+
 static void stmfts_report_hover_event(struct stmfts_data *sdata,
 				      const u8 event[])
 {
@@ -251,7 +446,6 @@ static void stmfts_parse_events(struct stmfts_data *sdata)
 		u8 *event = &sdata->data[i * STMFTS_EVENT_SIZE];
 
 		switch (event[0]) {
-
 		case STMFTS_EV_CONTROLLER_READY:
 		case STMFTS_EV_SLEEP_OUT_CONTROLLER_READY:
 		case STMFTS_EV_STATUS:
@@ -264,7 +458,6 @@ static void stmfts_parse_events(struct stmfts_data *sdata)
 		}
 
 		switch (event[0] & STMFTS_MASK_EVENT_ID) {
-
 		case STMFTS_EV_MULTI_TOUCH_ENTER:
 		case STMFTS_EV_MULTI_TOUCH_MOTION:
 			stmfts_report_contact_event(sdata, event);
@@ -298,6 +491,45 @@ static void stmfts_parse_events(struct stmfts_data *sdata)
 	}
 }
 
+static void stmfts5_parse_events(struct stmfts_data *sdata)
+{
+	for (int i = 0; i < STMFTS_STACK_DEPTH; i++) {
+		u8 *event = &sdata->data[i * STMFTS_EVENT_SIZE];
+
+		switch (event[0]) {
+		case STMFTS5_EV_CONTROLLER_READY:
+			complete(&sdata->cmd_done);
+			fallthrough;
+
+		case STMFTS_EV_NO_EVENT:
+		case STMFTS5_EV_STATUS_UPDATE:
+		case STMFTS5_EV_USER_REPORT:
+		case STMFTS5_EV_DEBUG:
+			return;
+
+		case STMFTS5_EV_MULTI_TOUCH_ENTER:
+		case STMFTS5_EV_MULTI_TOUCH_MOTION:
+			stmfts5_report_contact_event(sdata, event);
+			break;
+
+		case STMFTS5_EV_MULTI_TOUCH_LEAVE:
+			stmfts5_report_contact_release(sdata, event);
+			break;
+
+		case STMFTS5_EV_ERROR:
+			dev_warn(&sdata->client->dev,
+				 "error code: 0x%x%x%x%x%x%x",
+				 event[6], event[5], event[4],
+				 event[3], event[2], event[1]);
+			break;
+
+		default:
+			dev_err(&sdata->client->dev,
+				"unknown FTS5 event %#02x\n", event[0]);
+		}
+	}
+}
+
 static irqreturn_t stmfts_irq_handler(int irq, void *dev)
 {
 	struct stmfts_data *sdata = dev;
@@ -310,7 +542,7 @@ static irqreturn_t stmfts_irq_handler(int irq, void *dev)
 		dev_err(&sdata->client->dev,
 			"failed to read events: %d\n", err);
 	else
-		stmfts_parse_events(sdata);
+		sdata->ops->parse_events(sdata);
 
 	return IRQ_HANDLED;
 }
@@ -332,6 +564,25 @@ static int stmfts_command(struct stmfts_data *sdata, const u8 cmd)
 	return 0;
 }
 
+static int stmfts5_set_scan_mode(struct stmfts_data *sdata, const u8 val)
+{
+	int err;
+
+	u8 scan_mode_cmd[3] = { STMFTS5_SET_SCAN_MODE, 0x00, val };
+	struct i2c_msg msg = {
+		.addr = sdata->client->addr,
+		.len = sizeof(scan_mode_cmd),
+		.buf = scan_mode_cmd,
+	};
+
+	err = i2c_transfer(sdata->client->adapter, &msg, 1);
+	if (err != 1)
+		return err < 0 ? err : -EIO;
+
+	return 0;
+
+}
+
 static int stmfts_input_open(struct input_dev *dev)
 {
 	struct stmfts_data *sdata = input_get_drvdata(dev);
@@ -371,6 +622,28 @@ static int stmfts_input_open(struct input_dev *dev)
 	return 0;
 }
 
+static int stmfts5_input_open(struct input_dev *dev)
+{
+	struct stmfts_data *sdata = input_get_drvdata(dev);
+	int err;
+
+	err = pm_runtime_resume_and_get(&sdata->client->dev);
+	if (err)
+		return err;
+
+	mutex_lock(&sdata->mutex);
+	sdata->running = true;
+	mutex_unlock(&sdata->mutex);
+
+	err = stmfts5_set_scan_mode(sdata, 0xff);
+	if (err) {
+		pm_runtime_put_sync(&sdata->client->dev);
+		return err;
+	}
+
+	return 0;
+}
+
 static void stmfts_input_close(struct input_dev *dev)
 {
 	struct stmfts_data *sdata = input_get_drvdata(dev);
@@ -404,6 +677,23 @@ static void stmfts_input_close(struct input_dev *dev)
 	pm_runtime_put_sync(&sdata->client->dev);
 }
 
+static void stmfts5_input_close(struct input_dev *dev)
+{
+	struct stmfts_data *sdata = input_get_drvdata(dev);
+	int err;
+
+	err = stmfts5_set_scan_mode(sdata, 0x00);
+	if (err)
+		dev_warn(&sdata->client->dev,
+			 "failed to disable touchscreen: %d\n", err);
+
+	mutex_lock(&sdata->mutex);
+	sdata->running = false;
+	mutex_unlock(&sdata->mutex);
+
+	pm_runtime_put_sync(&sdata->client->dev);
+}
+
 static ssize_t stmfts_sysfs_chip_id(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
@@ -484,10 +774,8 @@ static ssize_t stmfts_sysfs_hover_enable_write(struct device *dev,
 	guard(mutex)(&sdata->mutex);
 
 	if (hover != sdata->hover_enabled) {
-		if (sdata->running) {
-			err = i2c_smbus_write_byte(sdata->client,
-					   value ? STMFTS_SS_HOVER_SENSE_ON :
-						   STMFTS_SS_HOVER_SENSE_OFF);
+		if (sdata->running && sdata->ops->set_hover) {
+			err = sdata->ops->set_hover(sdata, hover);
 			if (err)
 				return err;
 		}
@@ -612,7 +900,7 @@ static int stmfts_power_on(struct stmfts_data *sdata)
 	if (sdata->reset_gpio)
 		stmfts_reset(sdata);
 
-	err = stmfts_configure(sdata);
+	err = sdata->ops->configure(sdata);
 	if (err)
 		regulator_bulk_disable(ARRAY_SIZE(stmfts_supplies),
 				       sdata->supplies);
@@ -620,6 +908,29 @@ static int stmfts_power_on(struct stmfts_data *sdata)
 	return err;
 }
 
+static int stmfts5_configure(struct stmfts_data *sdata)
+{
+	u8 event[STMFTS_EVENT_SIZE];
+	int ret;
+
+	/* Verify I2C communication */
+	ret = i2c_smbus_read_i2c_block_data(sdata->client,
+					    STMFTS_READ_ALL_EVENT,
+					    sizeof(event), event);
+	if (ret < 0)
+		return ret;
+
+	enable_irq(sdata->client->irq);
+
+	return 0;
+}
+
+static void stmfts5_chip_power_off(struct stmfts_data *sdata)
+{
+	i2c_smbus_write_byte(sdata->client, STMFTS_SLEEP_IN);
+	msleep(20);
+}
+
 static void stmfts_power_off(void *data)
 {
 	struct stmfts_data *sdata = data;
@@ -629,10 +940,73 @@ static void stmfts_power_off(void *data)
 	if (sdata->reset_gpio)
 		gpiod_set_value_cansleep(sdata->reset_gpio, 1);
 
+	if (sdata->ops->power_off)
+		sdata->ops->power_off(sdata);
+
 	regulator_bulk_disable(ARRAY_SIZE(stmfts_supplies),
 			       sdata->supplies);
 }
 
+static int stmfts_setup_input(struct stmfts_data *sdata)
+{
+	struct device *dev = &sdata->client->dev;
+
+	input_set_abs_params(sdata->input, ABS_MT_ORIENTATION, 0, 255, 0, 0);
+	input_set_abs_params(sdata->input, ABS_DISTANCE, 0, 255, 0, 0);
+
+	sdata->use_key = device_property_read_bool(dev, "touch-key-connected");
+	if (sdata->use_key) {
+		input_set_capability(sdata->input, EV_KEY, KEY_MENU);
+		input_set_capability(sdata->input, EV_KEY, KEY_BACK);
+	}
+
+	return input_mt_init_slots(sdata->input, STMFTS_MAX_FINGERS,
+				   INPUT_MT_DIRECT);
+}
+
+static int stmfts5_setup_input(struct stmfts_data *sdata)
+{
+	struct device *dev = &sdata->client->dev;
+
+	sdata->mode_switch_gpio = devm_gpiod_get_optional(dev, "mode-switch",
+							  GPIOD_OUT_HIGH);
+	if (IS_ERR(sdata->mode_switch_gpio))
+		return dev_err_probe(dev, PTR_ERR(sdata->mode_switch_gpio),
+				     "Failed to get GPIO 'switch'\n");
+
+	/* Mark as direct input device for calibration support */
+	__set_bit(INPUT_PROP_DIRECT, sdata->input->propbit);
+
+	/* Set up basic touch capabilities */
+	input_set_capability(sdata->input, EV_KEY, BTN_TOUCH);
+
+	/* Set resolution for accurate calibration */
+	if (!input_abs_get_res(sdata->input, ABS_MT_POSITION_X)) {
+		input_abs_set_res(sdata->input, ABS_MT_POSITION_X, 10);
+		input_abs_set_res(sdata->input, ABS_MT_POSITION_Y, 10);
+	}
+
+	input_set_abs_params(sdata->input, ABS_MT_DISTANCE, 0, 255, 0, 0);
+
+	/* Enable stylus support if requested */
+	sdata->stylus_enabled = device_property_read_bool(dev, "stylus-enabled");
+
+	/* Initialize touch tracking bitmaps */
+	sdata->touch_id = 0;
+	sdata->stylus_id = 0;
+
+	/* Initialize MT slots with support for pen tool type */
+	return input_mt_init_slots(sdata->input, STMFTS_MAX_FINGERS,
+				   INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+}
+
+static int stmfts_set_hover(struct stmfts_data *sdata, bool enable)
+{
+	return i2c_smbus_write_byte(sdata->client,
+				    enable ? STMFTS_SS_HOVER_SENSE_ON :
+					     STMFTS_SS_HOVER_SENSE_OFF);
+}
+
 static int stmfts_enable_led(struct stmfts_data *sdata)
 {
 	int err;
@@ -678,6 +1052,8 @@ static int stmfts_probe(struct i2c_client *client)
 	mutex_init(&sdata->mutex);
 	init_completion(&sdata->cmd_done);
 
+	sdata->ops = of_device_get_match_data(dev);
+
 	err = devm_regulator_bulk_get_const(dev,
 					    ARRAY_SIZE(stmfts_supplies),
 					    stmfts_supplies,
@@ -697,8 +1073,8 @@ static int stmfts_probe(struct i2c_client *client)
 
 	sdata->input->name = STMFTS_DEV_NAME;
 	sdata->input->id.bustype = BUS_I2C;
-	sdata->input->open = stmfts_input_open;
-	sdata->input->close = stmfts_input_close;
+	sdata->input->open = sdata->ops->input_open;
+	sdata->input->close = sdata->ops->input_close;
 
 	input_set_capability(sdata->input, EV_ABS, ABS_MT_POSITION_X);
 	input_set_capability(sdata->input, EV_ABS, ABS_MT_POSITION_Y);
@@ -706,19 +1082,9 @@ static int stmfts_probe(struct i2c_client *client)
 
 	input_set_abs_params(sdata->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
 	input_set_abs_params(sdata->input, ABS_MT_TOUCH_MINOR, 0, 255, 0, 0);
-	input_set_abs_params(sdata->input, ABS_MT_ORIENTATION, 0, 255, 0, 0);
 	input_set_abs_params(sdata->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
-	input_set_abs_params(sdata->input, ABS_DISTANCE, 0, 255, 0, 0);
-
-	sdata->use_key = device_property_read_bool(dev,
-						   "touch-key-connected");
-	if (sdata->use_key) {
-		input_set_capability(sdata->input, EV_KEY, KEY_MENU);
-		input_set_capability(sdata->input, EV_KEY, KEY_BACK);
-	}
 
-	err = input_mt_init_slots(sdata->input,
-				  STMFTS_MAX_FINGERS, INPUT_MT_DIRECT);
+	err = sdata->ops->setup_input(sdata);
 	if (err)
 		return err;
 
@@ -789,13 +1155,62 @@ static int stmfts_runtime_suspend(struct device *dev)
 	return ret;
 }
 
-static int stmfts_runtime_resume(struct device *dev)
+static int stmfts_chip_runtime_resume(struct stmfts_data *sdata)
+{
+	return i2c_smbus_write_byte(sdata->client, STMFTS_SLEEP_OUT);
+}
+
+static int stmfts5_chip_runtime_resume(struct stmfts_data *sdata)
 {
-	struct stmfts_data *sdata = dev_get_drvdata(dev);
 	struct i2c_client *client = sdata->client;
+	struct device *dev = &client->dev;
+	u8 int_enable_cmd[4] = {0xB6, 0x00, 0x2C, 0x01};
+	struct i2c_msg msg = {
+		.addr = client->addr,
+		.len = sizeof(int_enable_cmd),
+		.buf = int_enable_cmd,
+	};
 	int ret;
 
 	ret = i2c_smbus_write_byte(client, STMFTS_SLEEP_OUT);
+	if (ret)
+		return ret;
+
+	msleep(20);
+
+	/* Perform capacitance tuning after wakeup */
+	ret = i2c_smbus_write_byte(client, STMFTS_MS_CX_TUNING);
+	if (ret)
+		dev_warn(dev, "MS_CX_TUNING failed: %d\n", ret);
+	msleep(20);
+
+	ret = i2c_smbus_write_byte(client, STMFTS_SS_CX_TUNING);
+	if (ret)
+		dev_warn(dev, "SS_CX_TUNING failed: %d\n", ret);
+	msleep(20);
+
+	/* Force calibration */
+	ret = i2c_smbus_write_byte(client, STMFTS_FULL_FORCE_CALIBRATION);
+	if (ret)
+		dev_warn(dev, "FORCE_CALIBRATION failed: %d\n", ret);
+	msleep(50);
+
+	/* Enable controller interrupts */
+	ret = i2c_transfer(client->adapter, &msg, 1);
+	if (ret != 1)
+		return ret < 0 ? ret : -EIO;
+
+	msleep(20);
+
+	return 0;
+}
+
+static int stmfts_runtime_resume(struct device *dev)
+{
+	struct stmfts_data *sdata = dev_get_drvdata(dev);
+	int ret;
+
+	ret = sdata->ops->runtime_resume(sdata);
 	if (ret)
 		dev_err(dev, "failed to resume device: %d\n", ret);
 
@@ -824,8 +1239,29 @@ static const struct dev_pm_ops stmfts_pm_ops = {
 };
 
 #ifdef CONFIG_OF
+static const struct stmfts_chip_ops stmfts4_ops = {
+	.configure	= stmfts_configure,
+	.setup_input	= stmfts_setup_input,
+	.input_open	= stmfts_input_open,
+	.input_close	= stmfts_input_close,
+	.parse_events	= stmfts_parse_events,
+	.set_hover	= stmfts_set_hover,
+	.runtime_resume	= stmfts_chip_runtime_resume,
+};
+
+static const struct stmfts_chip_ops stmfts5_ops = {
+	.configure	= stmfts5_configure,
+	.power_off	= stmfts5_chip_power_off,
+	.setup_input	= stmfts5_setup_input,
+	.input_open	= stmfts5_input_open,
+	.input_close	= stmfts5_input_close,
+	.parse_events	= stmfts5_parse_events,
+	.runtime_resume	= stmfts5_chip_runtime_resume,
+};
+
 static const struct of_device_id stmfts_of_match[] = {
-	{ .compatible = "st,stmfts", },
+	{ .compatible = "st,stmfts",	.data = &stmfts4_ops },
+	{ .compatible = "st,stmfts5",	.data = &stmfts5_ops },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, stmfts_of_match);
@@ -853,5 +1289,7 @@ static struct i2c_driver stmfts_driver = {
 module_i2c_driver(stmfts_driver);
 
 MODULE_AUTHOR("Andi Shyti <andi.shyti@samsung.com>");
+MODULE_AUTHOR("David Heidelberg <david@ixit.cz>");
+MODULE_AUTHOR("Petr Hodina <petr.hodina@protonmail.com>");
 MODULE_DESCRIPTION("STMicroelectronics FTS Touch Screen");
 MODULE_LICENSE("GPL");

-- 
2.53.0

[PATCH v4 11/11] arm64: dts: qcom: sdm845-google: Add STM FTS touchscreen support

[David Heidelberg via B4 Relay]

From: Petr Hodina <petr.hodina@protonmail.com>

Basic touchscreen connected to second i2c bus.

Signed-off-by: Petr Hodina <petr.hodina@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 arch/arm64/boot/dts/qcom/sdm845-google-blueline.dts | 19 ++++++++++++++++++-
 arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi  |  2 +-
 2 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-google-blueline.dts b/arch/arm64/boot/dts/qcom/sdm845-google-blueline.dts
index fa89be500fb85..8fb988130b551 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-google-blueline.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-google-blueline.dts
@@ -26,7 +26,24 @@ &i2c2 {
 
 	status = "okay";
 
-	/* ST,FTS @ 49 */
+	touchscreen@49 {
+		compatible = "st,stmfts5";
+		reg = <0x49>;
+
+		pinctrl-0 = <&touchscreen_irq_n>, <&touchscreen_reset>;
+		pinctrl-names = "default";
+
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
+
+		mode-switch-gpios = <&tlmm 136 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+
+		avdd-supply = <&vreg_l14a_1p8>;
+		vdd-supply = <&vreg_l19a_3p3>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2160>;
+	};
 };
 
 &mdss_dsi0 {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi
index 6930066857768..4653c63ec26d2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi
@@ -466,7 +466,7 @@ touchscreen_reset: ts-reset-state {
 		bias-pull-up;
 	};
 
-	touchscreen_pins: ts-pins-gpio-state {
+	touchscreen_irq_n: ts-irq-n-gpio-state {
 		pins = "gpio125";
 		function = "gpio";
 		drive-strength = <2>;

-- 
2.53.0

Re: [PATCH v4 11/11] arm64: dts: qcom: sdm845-google: Add STM FTS touchscreen support

[Dmitry Baryshkov]

On Thu, Apr 09, 2026 at 12:15:54AM +0200, David Heidelberg via B4 Relay wrote:
> From: Petr Hodina <petr.hodina@protonmail.com>
> 
> Basic touchscreen connected to second i2c bus.
> 
> Signed-off-by: Petr Hodina <petr.hodina@protonmail.com>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Co-developed-by: David Heidelberg <david@ixit.cz>
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  arch/arm64/boot/dts/qcom/sdm845-google-blueline.dts | 19 ++++++++++++++++++-
>  arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi  |  2 +-
>  2 files changed, 19 insertions(+), 2 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

Re: [PATCH v4 07/11] dt-bindings: input: touchscreen: st,stmfts: Introduce reset GPIO

[Krzysztof Kozlowski]

On Thu, Apr 09, 2026 at 12:15:50AM +0200, David Heidelberg wrote:
> FTS has associated reset GPIO, document it.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml | 4 ++++
>  1 file changed, 4 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

Re: [PATCH v4 09/11] dt-bindings: input: touchscreen: st,stmfts: Introduce STM FTS5

[Krzysztof Kozlowski]

On Thu, Apr 09, 2026 at 12:15:52AM +0200, David Heidelberg wrote:
> Introduce more recent STM FTS5 touchscreen support.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  .../devicetree/bindings/input/touchscreen/st,stmfts.yaml  | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
> index 64c4f24ea3dd0..441fc92b9a4ed 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
> +++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
> @@ -16,10 +16,19 @@ description:
>  
>  allOf:
>    - $ref: touchscreen.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          const: st,stmfts5
> +    then:
> +      required:
> +        - mode-switch-gpios

Does existing variant have these pins? If not, then missing else with
"mode-switch-gpios: false".

Please move entire allOf to the bottom, like in example-schema, so after
"required" block.

>  
>  properties:
>    compatible:
> -    const: st,stmfts
> +    enum:
> +      - st,stmfts
> +      - st,stmfts5

Best regards,
Krzysztof

Re: [PATCH v4 00/11] Input: support for STM FTS5

[Dmitry Torokhov]

On Thu, Apr 09, 2026 at 12:15:43AM +0200, David Heidelberg via B4 Relay wrote:
> Used on various phones. Minimal viable driver.
> 
> Includes device-tree enabling touchscreen on Pixel 3.
> 
> What is missing:
>  - switching between AP and SLPI mode (to be able to wake up phone by touch)
>  - firmware loading
>  - anything above basic touch
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>

Applied #1 through #8 (#5 with minor edits). 

Thanks.

-- 
Dmitry