* [PATCH] ARM: imx: avic: fix device_node refcount leaks in mxc_init_irq()
@ 2026-06-10 5:31 Weigang He
2026-06-10 9:42 ` Martin Kaiser
0 siblings, 1 reply; 2+ messages in thread
From: Weigang He @ 2026-06-10 5:31 UTC (permalink / raw)
To: Shawn Guo
Cc: Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Martin Kaiser, imx, linux-arm-kernel, linux-kernel, Weigang He
mxc_init_irq() obtains two device_node references via
of_find_compatible_node() and never releases either one:
- The "fsl,imx25-ccm" node (looked up to map the CCM low-power
interrupt mask registers on i.MX25) is stored in np, used by
of_iomap(), and then the same np variable is overwritten by the
second of_find_compatible_node() call without an of_node_put().
On i.MX25 this leaks the node reference on every boot.
- The "fsl,avic" node is passed via of_fwnode_handle(np) to
irq_domain_create_legacy(), which takes its own reference on the
fwnode through fwnode_handle_get(), so the caller's reference is
not transferred. np is then leaked at function return.
Both lookups predate the switch to irq_domain_create_*(); the missing
puts have been there since the code was introduced.
Drop each reference once the value derived from it is no longer needed:
after of_iomap() has mapped the CCM registers, and after
irq_domain_create_legacy() has taken its own fwnode reference.
of_node_put() is NULL-safe, so platforms without these nodes are
unaffected.
Found by static analysis tool CodeQL.
Fixes: 544496ab5cbd ("ARM: imx: move irq_domain_add_legacy call into avic driver")
Fixes: 9b454d16e57d ("ARM: imx: avic: set low-power interrupt mask for imx25")
Signed-off-by: Weigang He <geoffreyhe2@gmail.com>
---
arch/arm/mach-imx/avic.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
index 3067c06b4b8eb..6873a50bbe2c0 100644
--- a/arch/arm/mach-imx/avic.c
+++ b/arch/arm/mach-imx/avic.c
@@ -173,6 +173,7 @@ static void __init mxc_init_irq(void __iomem *irqbase)
np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm");
mx25_ccm_base = of_iomap(np, 0);
+ of_node_put(np);
if (mx25_ccm_base) {
/*
@@ -203,6 +204,7 @@ static void __init mxc_init_irq(void __iomem *irqbase)
np = of_find_compatible_node(NULL, NULL, "fsl,avic");
domain = irq_domain_create_legacy(of_fwnode_handle(np), AVIC_NUM_IRQS, irq_base, 0,
&irq_domain_simple_ops, NULL);
+ of_node_put(np);
WARN_ON(!domain);
for (i = 0; i < AVIC_NUM_IRQS / 32; i++, irq_base += 32)
base-commit: 0f61b1860cc3f52aef9036d7235ed1f017632193
--
2.43.0
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH] ARM: imx: avic: fix device_node refcount leaks in mxc_init_irq()
2026-06-10 5:31 [PATCH] ARM: imx: avic: fix device_node refcount leaks in mxc_init_irq() Weigang He
@ 2026-06-10 9:42 ` Martin Kaiser
0 siblings, 0 replies; 2+ messages in thread
From: Martin Kaiser @ 2026-06-10 9:42 UTC (permalink / raw)
To: Weigang He
Cc: Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
imx, linux-arm-kernel, linux-kernel
Hi,
Thus wrote Weigang He (geoffreyhe2@gmail.com):
> mxc_init_irq() obtains two device_node references via
> of_find_compatible_node() and never releases either one:
> - The "fsl,imx25-ccm" node (looked up to map the CCM low-power
> interrupt mask registers on i.MX25) is stored in np, used by
> of_iomap(), and then the same np variable is overwritten by the
> second of_find_compatible_node() call without an of_node_put().
> On i.MX25 this leaks the node reference on every boot.
> - The "fsl,avic" node is passed via of_fwnode_handle(np) to
> irq_domain_create_legacy(), which takes its own reference on the
> fwnode through fwnode_handle_get(), so the caller's reference is
> not transferred. np is then leaked at function return.
> Both lookups predate the switch to irq_domain_create_*(); the missing
> puts have been there since the code was introduced.
> Drop each reference once the value derived from it is no longer needed:
> after of_iomap() has mapped the CCM registers, and after
> irq_domain_create_legacy() has taken its own fwnode reference.
> of_node_put() is NULL-safe, so platforms without these nodes are
> unaffected.
> Found by static analysis tool CodeQL.
> Fixes: 544496ab5cbd ("ARM: imx: move irq_domain_add_legacy call into avic driver")
> Fixes: 9b454d16e57d ("ARM: imx: avic: set low-power interrupt mask for imx25")
> Signed-off-by: Weigang He <geoffreyhe2@gmail.com>
> ---
> arch/arm/mach-imx/avic.c | 2 ++
> 1 file changed, 2 insertions(+)
> diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
> index 3067c06b4b8eb..6873a50bbe2c0 100644
> --- a/arch/arm/mach-imx/avic.c
> +++ b/arch/arm/mach-imx/avic.c
> @@ -173,6 +173,7 @@ static void __init mxc_init_irq(void __iomem *irqbase)
> np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm");
> mx25_ccm_base = of_iomap(np, 0);
> + of_node_put(np);
> if (mx25_ccm_base) {
> /*
> @@ -203,6 +204,7 @@ static void __init mxc_init_irq(void __iomem *irqbase)
> np = of_find_compatible_node(NULL, NULL, "fsl,avic");
> domain = irq_domain_create_legacy(of_fwnode_handle(np), AVIC_NUM_IRQS, irq_base, 0,
> &irq_domain_simple_ops, NULL);
> + of_node_put(np);
> WARN_ON(!domain);
> for (i = 0; i < AVIC_NUM_IRQS / 32; i++, irq_base += 32)
> base-commit: 0f61b1860cc3f52aef9036d7235ed1f017632193
> --
> 2.43.0
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Thanks,
Martin
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-06-10 9:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-06-10 5:31 [PATCH] ARM: imx: avic: fix device_node refcount leaks in mxc_init_irq() Weigang He
2026-06-10 9:42 ` Martin Kaiser
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox