From: Frank Li <Frank.li@oss.nxp.com>
To: phucduc.bui@gmail.com
Cc: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Shengjiu Wang <shengjiu.wang@gmail.com>,
Xiubo Li <Xiubo.Lee@gmail.com>, Frank Li <Frank.Li@nxp.com>,
Fabio Estevam <festevam@gmail.com>,
Nicolin Chen <nicoleotsuka@gmail.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v2 10/11] ASoC: fsl: mpc5200_dma: Use guard() for spin locks
Date: Mon, 15 Jun 2026 09:14:35 -0500 [thread overview]
Message-ID: <ajAIy40qrE3F0Lgi@SMW015318> (raw)
In-Reply-To: <20260615093824.115751-11-phucduc.bui@gmail.com>
On Mon, Jun 15, 2026 at 04:38:23PM +0700, phucduc.bui@gmail.com wrote:
> From: bui duc phuc <phucduc.bui@gmail.com>
>
> Clean up the code using guard() for spin locks.
> Merely code refactoring, and no behavior change.
>
> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> sound/soc/fsl/mpc5200_dma.c | 56 ++++++++++++++++++-------------------
> 1 file changed, 28 insertions(+), 28 deletions(-)
>
> diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
> index 56e2cf2f727b..bfedb2dea0b3 100644
> --- a/sound/soc/fsl/mpc5200_dma.c
> +++ b/sound/soc/fsl/mpc5200_dma.c
> @@ -77,18 +77,20 @@ static irqreturn_t psc_dma_bcom_irq(int irq, void *_psc_dma_stream)
> {
> struct psc_dma_stream *s = _psc_dma_stream;
>
> - spin_lock(&s->psc_dma->lock);
> - /* For each finished period, dequeue the completed period buffer
> - * and enqueue a new one in it's place. */
> - while (bcom_buffer_done(s->bcom_task)) {
> - bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
> + scoped_guard(spinlock, &s->psc_dma->lock) {
> + /*
> + * For each finished period, dequeue the completed period buffer
> + * and enqueue a new one in its place
> + */
> + while (bcom_buffer_done(s->bcom_task)) {
> + bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
>
> - s->period_current = (s->period_current+1) % s->runtime->periods;
> - s->period_count++;
> + s->period_current = (s->period_current+1) % s->runtime->periods;
> + s->period_count++;
>
> - psc_dma_bcom_enqueue_next_buffer(s);
> + psc_dma_bcom_enqueue_next_buffer(s);
> + }
> }
> - spin_unlock(&s->psc_dma->lock);
>
> /* If the stream is active, then also inform the PCM middle layer
> * of the period finished event. */
> @@ -116,7 +118,6 @@ static int psc_dma_trigger(struct snd_soc_component *component,
> struct psc_dma_stream *s = to_psc_dma_stream(substream, psc_dma);
> struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
> u16 imr;
> - unsigned long flags;
> int i;
>
> switch (cmd) {
> @@ -135,19 +136,18 @@ static int psc_dma_trigger(struct snd_soc_component *component,
> /* Fill up the bestcomm bd queue and enable DMA.
> * This will begin filling the PSC's fifo.
> */
> - spin_lock_irqsave(&psc_dma->lock, flags);
> -
> - if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
> - bcom_gen_bd_rx_reset(s->bcom_task);
> - else
> - bcom_gen_bd_tx_reset(s->bcom_task);
> + scoped_guard(spinlock_irqsave, &psc_dma->lock) {
> + if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
> + bcom_gen_bd_rx_reset(s->bcom_task);
> + else
> + bcom_gen_bd_tx_reset(s->bcom_task);
>
> - for (i = 0; i < runtime->periods; i++)
> - if (!bcom_queue_full(s->bcom_task))
> - psc_dma_bcom_enqueue_next_buffer(s);
> + for (i = 0; i < runtime->periods; i++)
> + if (!bcom_queue_full(s->bcom_task))
> + psc_dma_bcom_enqueue_next_buffer(s);
>
> - bcom_enable(s->bcom_task);
> - spin_unlock_irqrestore(&psc_dma->lock, flags);
> + bcom_enable(s->bcom_task);
> + }
>
> out_8(®s->command, MPC52xx_PSC_RST_ERR_STAT);
>
> @@ -158,13 +158,13 @@ static int psc_dma_trigger(struct snd_soc_component *component,
> substream->pstr->stream, s->period_count);
> s->active = 0;
>
> - spin_lock_irqsave(&psc_dma->lock, flags);
> - bcom_disable(s->bcom_task);
> - if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
> - bcom_gen_bd_rx_reset(s->bcom_task);
> - else
> - bcom_gen_bd_tx_reset(s->bcom_task);
> - spin_unlock_irqrestore(&psc_dma->lock, flags);
> + scoped_guard(spinlock_irqsave, &psc_dma->lock) {
> + bcom_disable(s->bcom_task);
> + if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
> + bcom_gen_bd_rx_reset(s->bcom_task);
> + else
> + bcom_gen_bd_tx_reset(s->bcom_task);
> + }
>
> break;
>
> --
> 2.43.0
>
>
next prev parent reply other threads:[~2026-06-15 14:15 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-15 9:38 [PATCH v2 00/11] ASoC: fsl: Use guard() for mutex & spin locks phucduc.bui
2026-06-15 9:38 ` [PATCH v2 01/11] ASoC: fsl_asrc: Use guard() for " phucduc.bui
2026-06-15 14:18 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 02/11] ASoC: fsl_audmix: " phucduc.bui
2026-06-15 14:30 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 03/11] ASoC: fsl_easrc: " phucduc.bui
2026-06-15 14:24 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 04/11] ASoC: fsl_esai: " phucduc.bui
2026-06-15 14:15 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 05/11] ASoC: fsl_spdif: " phucduc.bui
2026-06-15 14:17 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 06/11] ASoC: fsl_ssi: Use guard() for mutex locks phucduc.bui
2026-06-15 14:25 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 07/11] ASoC: fsl_xcvr: Use guard() for spin locks phucduc.bui
2026-06-15 14:19 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 08/11] ASoC: imx-audio-rpmsg: " phucduc.bui
2026-06-15 14:17 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 09/11] ASoC: fsl_rpmsg: Use guard() for mutex & " phucduc.bui
2026-06-15 14:12 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 10/11] ASoC: fsl: mpc5200_dma: Use guard() for " phucduc.bui
2026-06-15 14:14 ` Frank Li [this message]
2026-06-15 9:38 ` [PATCH v2 11/11] ASoC: fsl: mpc5200_psc_ac97: Use guard() for mutex locks phucduc.bui
2026-06-15 14:26 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ajAIy40qrE3F0Lgi@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=perex@perex.cz \
--cc=phucduc.bui@gmail.com \
--cc=s.hauer@pengutronix.de \
--cc=shengjiu.wang@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox