From: Frank Li <Frank.li@oss.nxp.com>
To: phucduc.bui@gmail.com
Cc: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Shengjiu Wang <shengjiu.wang@gmail.com>,
Xiubo Li <Xiubo.Lee@gmail.com>, Frank Li <Frank.Li@nxp.com>,
Fabio Estevam <festevam@gmail.com>,
Nicolin Chen <nicoleotsuka@gmail.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v2 04/11] ASoC: fsl_esai: Use guard() for spin locks
Date: Mon, 15 Jun 2026 09:15:43 -0500 [thread overview]
Message-ID: <ajAJD-xr0m2riJzL@SMW015318> (raw)
In-Reply-To: <20260615093824.115751-5-phucduc.bui@gmail.com>
On Mon, Jun 15, 2026 at 04:38:17PM +0700, phucduc.bui@gmail.com wrote:
> From: bui duc phuc <phucduc.bui@gmail.com>
>
> Clean up the code using guard() for spin locks.
> Merely code refactoring, and no behavior change.
>
> Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> sound/soc/fsl/fsl_esai.c | 16 +++++-----------
> 1 file changed, 5 insertions(+), 11 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
> index cde0b0c6c1ef..4a530a6c33f0 100644
> --- a/sound/soc/fsl/fsl_esai.c
> +++ b/sound/soc/fsl/fsl_esai.c
> @@ -709,10 +709,9 @@ static void fsl_esai_hw_reset(struct work_struct *work)
> {
> struct fsl_esai *esai_priv = container_of(work, struct fsl_esai, work);
> bool tx = true, rx = false, enabled[2];
> - unsigned long lock_flags;
> u32 tfcr, rfcr;
>
> - spin_lock_irqsave(&esai_priv->lock, lock_flags);
> + guard(spinlock_irqsave)(&esai_priv->lock);
> /* Save the registers */
> regmap_read(esai_priv->regmap, REG_ESAI_TFCR, &tfcr);
> regmap_read(esai_priv->regmap, REG_ESAI_RFCR, &rfcr);
> @@ -750,8 +749,6 @@ static void fsl_esai_hw_reset(struct work_struct *work)
> fsl_esai_trigger_start(esai_priv, tx);
> if (enabled[rx])
> fsl_esai_trigger_start(esai_priv, rx);
> -
> - spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
> }
>
> static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
> @@ -759,7 +756,6 @@ static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
> {
> struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
> bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
> - unsigned long lock_flags;
>
> esai_priv->channels[tx] = substream->runtime->channels;
>
> @@ -767,16 +763,14 @@ static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
> case SNDRV_PCM_TRIGGER_START:
> case SNDRV_PCM_TRIGGER_RESUME:
> case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
> - spin_lock_irqsave(&esai_priv->lock, lock_flags);
> - fsl_esai_trigger_start(esai_priv, tx);
> - spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
> + scoped_guard(spinlock_irqsave, &esai_priv->lock)
> + fsl_esai_trigger_start(esai_priv, tx);
> break;
> case SNDRV_PCM_TRIGGER_SUSPEND:
> case SNDRV_PCM_TRIGGER_STOP:
> case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> - spin_lock_irqsave(&esai_priv->lock, lock_flags);
> - fsl_esai_trigger_stop(esai_priv, tx);
> - spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
> + scoped_guard(spinlock_irqsave, &esai_priv->lock)
> + fsl_esai_trigger_stop(esai_priv, tx);
> break;
> default:
> return -EINVAL;
> --
> 2.43.0
>
>
next prev parent reply other threads:[~2026-06-15 14:16 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-15 9:38 [PATCH v2 00/11] ASoC: fsl: Use guard() for mutex & spin locks phucduc.bui
2026-06-15 9:38 ` [PATCH v2 01/11] ASoC: fsl_asrc: Use guard() for " phucduc.bui
2026-06-15 14:18 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 02/11] ASoC: fsl_audmix: " phucduc.bui
2026-06-15 14:30 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 03/11] ASoC: fsl_easrc: " phucduc.bui
2026-06-15 14:24 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 04/11] ASoC: fsl_esai: " phucduc.bui
2026-06-15 14:15 ` Frank Li [this message]
2026-06-15 9:38 ` [PATCH v2 05/11] ASoC: fsl_spdif: " phucduc.bui
2026-06-15 14:17 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 06/11] ASoC: fsl_ssi: Use guard() for mutex locks phucduc.bui
2026-06-15 14:25 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 07/11] ASoC: fsl_xcvr: Use guard() for spin locks phucduc.bui
2026-06-15 14:19 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 08/11] ASoC: imx-audio-rpmsg: " phucduc.bui
2026-06-15 14:17 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 09/11] ASoC: fsl_rpmsg: Use guard() for mutex & " phucduc.bui
2026-06-15 14:12 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 10/11] ASoC: fsl: mpc5200_dma: Use guard() for " phucduc.bui
2026-06-15 14:14 ` Frank Li
2026-06-15 9:38 ` [PATCH v2 11/11] ASoC: fsl: mpc5200_psc_ac97: Use guard() for mutex locks phucduc.bui
2026-06-15 14:26 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ajAJD-xr0m2riJzL@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=perex@perex.cz \
--cc=phucduc.bui@gmail.com \
--cc=s.hauer@pengutronix.de \
--cc=shengjiu.wang@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox