Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Vincent Donnefort <vdonnefort@google.com>
To: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>, Oliver Upton <oupton@kernel.org>,
	kvmarm@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>, Joey Gouly <joey.gouly@arm.com>,
	Steffen Eiden <seiden@linux.ibm.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Zenghui Yu <yuzenghui@huawei.com>,
	Quentin Perret <qperret@google.com>,
	Sebastian Ene <sebastianene@google.com>,
	Hyunwoo Kim <imv4bel@gmail.com>
Subject: Re: [PATCH v2 1/8] KVM: arm64: Extract MPIDR computation into a shared header
Date: Fri, 19 Jun 2026 14:24:59 +0100	[thread overview]
Message-ID: <ajVDK06_gDKYBro6@google.com> (raw)
In-Reply-To: <20260619070719.812227-2-tabba@google.com>

On Fri, Jun 19, 2026 at 08:07:12AM +0100, Fuad Tabba wrote:
> Extract the vCPU MPIDR computation embedded in reset_mpidr() into a
> kvm_calculate_mpidr() inline in sys_regs.h, so it can be computed
> without duplicating the logic. A follow-up series reuses it to reset
> protected vCPUs at EL2.
> 
> No functional change intended.
> 
> Signed-off-by: Fuad Tabba <tabba@google.com>

Reviewed-by: Vincent Donnefort <vdonnefort@google.com>

> ---
>  arch/arm64/kvm/sys_regs.c | 14 +-------------
>  arch/arm64/kvm/sys_regs.h | 19 +++++++++++++++++++
>  2 files changed, 20 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index 33c921df19b5..674fabe1d40d 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -976,21 +976,9 @@ static u64 reset_actlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
>  
>  static u64 reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
>  {
> -	u64 mpidr;
> +	u64 mpidr = kvm_calculate_mpidr(vcpu);
>  
> -	/*
> -	 * Map the vcpu_id into the first three affinity level fields of
> -	 * the MPIDR. We limit the number of VCPUs in level 0 due to a
> -	 * limitation to 16 CPUs in that level in the ICC_SGIxR registers
> -	 * of the GICv3 to be able to address each CPU directly when
> -	 * sending IPIs.
> -	 */
> -	mpidr = (vcpu->vcpu_id & 0x0f) << MPIDR_LEVEL_SHIFT(0);
> -	mpidr |= ((vcpu->vcpu_id >> 4) & 0xff) << MPIDR_LEVEL_SHIFT(1);
> -	mpidr |= ((vcpu->vcpu_id >> 12) & 0xff) << MPIDR_LEVEL_SHIFT(2);
> -	mpidr |= (1ULL << 31);
>  	vcpu_write_sys_reg(vcpu, mpidr, MPIDR_EL1);
> -
>  	return mpidr;
>  }
>  
> diff --git a/arch/arm64/kvm/sys_regs.h b/arch/arm64/kvm/sys_regs.h
> index 2a983664220c..bd56a45abbf9 100644
> --- a/arch/arm64/kvm/sys_regs.h
> +++ b/arch/arm64/kvm/sys_regs.h
> @@ -222,6 +222,25 @@ find_reg(const struct sys_reg_params *params, const struct sys_reg_desc table[],
>  	return __inline_bsearch((void *)pval, table, num, sizeof(table[0]), match_sys_reg);
>  }
>  
> +static inline u64 kvm_calculate_mpidr(const struct kvm_vcpu *vcpu)
> +{
> +	u64 mpidr;
> +
> +	/*
> +	 * Map the vcpu_id into the first three affinity level fields of
> +	 * the MPIDR. We limit the number of VCPUs in level 0 due to a
> +	 * limitation to 16 CPUs in that level in the ICC_SGIxR registers
> +	 * of the GICv3 to be able to address each CPU directly when
> +	 * sending IPIs.
> +	 */
> +	mpidr = (vcpu->vcpu_id & 0x0f) << MPIDR_LEVEL_SHIFT(0);
> +	mpidr |= ((vcpu->vcpu_id >> 4) & 0xff) << MPIDR_LEVEL_SHIFT(1);
> +	mpidr |= ((vcpu->vcpu_id >> 12) & 0xff) << MPIDR_LEVEL_SHIFT(2);
> +	mpidr |= (1ULL << 31);
> +
> +	return mpidr;
> +}
> +
>  const struct sys_reg_desc *get_reg_by_id(u64 id,
>  					 const struct sys_reg_desc table[],
>  					 unsigned int num);
> -- 
> 2.55.0.rc0.738.g0c8ab3ebcc-goog
> 


  reply	other threads:[~2026-06-19 13:25 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-19  7:07 [PATCH v2 0/8] KVM: arm64: Rework pKVM vCPU state synchronisation Fuad Tabba
2026-06-19  7:07 ` [PATCH v2 1/8] KVM: arm64: Extract MPIDR computation into a shared header Fuad Tabba
2026-06-19 13:24   ` Vincent Donnefort [this message]
2026-06-19  7:07 ` [PATCH v2 2/8] KVM: arm64: Make vcpu_{read,write}_sys_reg available to HYP code Fuad Tabba
2026-06-19 13:26   ` Vincent Donnefort
2026-06-19  7:07 ` [PATCH v2 3/8] KVM: arm64: Factor out reusable vCPU reset helpers Fuad Tabba
2026-06-19 13:29   ` Vincent Donnefort
2026-06-19  7:07 ` [PATCH v2 4/8] KVM: arm64: Move PSCI helper functions to a shared header Fuad Tabba
2026-06-19 13:30   ` Vincent Donnefort
2026-06-19  7:07 ` [PATCH v2 5/8] KVM: arm64: Add host and hypervisor vCPU lookup primitives Fuad Tabba
2026-06-19 13:31   ` Vincent Donnefort
2026-06-19  7:07 ` [PATCH v2 6/8] KVM: arm64: Minimise EL2's exposure of host VGIC state during world switch Fuad Tabba
2026-06-19  7:07 ` [PATCH v2 7/8] KVM: arm64: Add primitives to flush/sync the VGIC state at EL2 Fuad Tabba
2026-06-19  7:07 ` [PATCH v2 8/8] KVM: arm64: Implement lazy vCPU state sync for non-protected guests Fuad Tabba
2026-06-19 13:12   ` Vincent Donnefort
2026-06-19 16:41     ` Fuad Tabba

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ajVDK06_gDKYBro6@google.com \
    --to=vdonnefort@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=imv4bel@gmail.com \
    --cc=joey.gouly@arm.com \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=oupton@kernel.org \
    --cc=qperret@google.com \
    --cc=sebastianene@google.com \
    --cc=seiden@linux.ibm.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tabba@google.com \
    --cc=will@kernel.org \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox