* [PATCH] ASoC: xilinx: formatter_pcm: use devm_clk_get_enabled and simplify probe
@ 2026-08-06 23:38 Rosen Penev
2026-08-06 23:43 ` Mark Brown
0 siblings, 1 reply; 2+ messages in thread
From: Rosen Penev @ 2026-08-06 23:38 UTC (permalink / raw)
To: linux-sound
Cc: Vincenzo Frascino, Liam Girdwood, Mark Brown, Jaroslav Kysela,
Takashi Iwai, Michal Simek, moderated list:ARM/ZYNQ ARCHITECTURE,
open list
Use devm_clk_get_enabled() to let the clock be enabled automatically
and cleaned up on unbind, dropping the manual clk_prepare_enable() and
clk_disable_unprepare() calls in probe and remove.
Simplify the probe error paths by returning directly instead of
jumping to clk_err, and use devm_snd_soc_register_component() return
value directly.
Assisted-by: opencode:deepseek-v4-flash-free
---
sound/soc/xilinx/xlnx_formatter_pcm.c | 47 ++++++++-------------------
1 file changed, 13 insertions(+), 34 deletions(-)
diff --git a/sound/soc/xilinx/xlnx_formatter_pcm.c b/sound/soc/xilinx/xlnx_formatter_pcm.c
index b50306b0fc06..948bc604738a 100644
--- a/sound/soc/xilinx/xlnx_formatter_pcm.c
+++ b/sound/soc/xilinx/xlnx_formatter_pcm.c
@@ -593,24 +593,17 @@ static int xlnx_formatter_pcm_probe(struct platform_device *pdev)
if (!aud_drv_data)
return -ENOMEM;
- aud_drv_data->axi_clk = devm_clk_get(dev, "s_axi_lite_aclk");
+ aud_drv_data->axi_clk = devm_clk_get_enabled(dev, "s_axi_lite_aclk");
if (IS_ERR(aud_drv_data->axi_clk)) {
ret = PTR_ERR(aud_drv_data->axi_clk);
dev_err(dev, "failed to get s_axi_lite_aclk(%d)\n", ret);
return ret;
}
- ret = clk_prepare_enable(aud_drv_data->axi_clk);
- if (ret) {
- dev_err(dev,
- "failed to enable s_axi_lite_aclk(%d)\n", ret);
- return ret;
- }
aud_drv_data->mmio = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(aud_drv_data->mmio)) {
dev_err(dev, "audio formatter ioremap failed\n");
- ret = PTR_ERR(aud_drv_data->mmio);
- goto clk_err;
+ return PTR_ERR(aud_drv_data->mmio);
}
val = readl(aud_drv_data->mmio + XLNX_AUD_CORE_CONFIG);
@@ -620,7 +613,7 @@ static int xlnx_formatter_pcm_probe(struct platform_device *pdev)
XLNX_MM2S_OFFSET);
if (ret) {
dev_err(dev, "audio formatter reset failed\n");
- goto clk_err;
+ return ret;
}
xlnx_formatter_disable_irqs(aud_drv_data->mmio +
XLNX_MM2S_OFFSET,
@@ -628,16 +621,15 @@ static int xlnx_formatter_pcm_probe(struct platform_device *pdev)
aud_drv_data->mm2s_irq = platform_get_irq_byname(pdev,
"irq_mm2s");
- if (aud_drv_data->mm2s_irq < 0) {
- ret = aud_drv_data->mm2s_irq;
- goto clk_err;
- }
+ if (aud_drv_data->mm2s_irq < 0)
+ return aud_drv_data->mm2s_irq;
+
ret = devm_request_irq(dev, aud_drv_data->mm2s_irq,
xlnx_mm2s_irq_handler, 0,
"xlnx_formatter_pcm_mm2s_irq", aud_drv_data);
if (ret) {
dev_err(dev, "xlnx audio mm2s irq request failed\n");
- goto clk_err;
+ return ret;
}
}
if (val & AUD_CFG_S2MM_MASK) {
@@ -646,7 +638,7 @@ static int xlnx_formatter_pcm_probe(struct platform_device *pdev)
XLNX_S2MM_OFFSET);
if (ret) {
dev_err(dev, "audio formatter reset failed\n");
- goto clk_err;
+ return ret;
}
xlnx_formatter_disable_irqs(aud_drv_data->mmio +
XLNX_S2MM_OFFSET,
@@ -654,34 +646,23 @@ static int xlnx_formatter_pcm_probe(struct platform_device *pdev)
aud_drv_data->s2mm_irq = platform_get_irq_byname(pdev,
"irq_s2mm");
- if (aud_drv_data->s2mm_irq < 0) {
- ret = aud_drv_data->s2mm_irq;
- goto clk_err;
- }
+ if (aud_drv_data->s2mm_irq < 0)
+ return aud_drv_data->s2mm_irq;
+
ret = devm_request_irq(dev, aud_drv_data->s2mm_irq,
xlnx_s2mm_irq_handler, 0,
"xlnx_formatter_pcm_s2mm_irq",
aud_drv_data);
if (ret) {
dev_err(dev, "xlnx audio s2mm irq request failed\n");
- goto clk_err;
+ return ret;
}
}
dev_set_drvdata(dev, aud_drv_data);
- ret = devm_snd_soc_register_component(dev, &xlnx_asoc_component,
+ return devm_snd_soc_register_component(dev, &xlnx_asoc_component,
NULL, 0);
- if (ret) {
- dev_err(dev, "pcm platform device register failed\n");
- goto clk_err;
- }
-
- return 0;
-
-clk_err:
- clk_disable_unprepare(aud_drv_data->axi_clk);
- return ret;
}
static void xlnx_formatter_pcm_remove(struct platform_device *pdev)
@@ -698,8 +679,6 @@ static void xlnx_formatter_pcm_remove(struct platform_device *pdev)
if (ret)
dev_err(&pdev->dev, "audio formatter reset failed\n");
-
- clk_disable_unprepare(adata->axi_clk);
}
static const struct of_device_id xlnx_formatter_pcm_of_match[] = {
--
2.55.0
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH] ASoC: xilinx: formatter_pcm: use devm_clk_get_enabled and simplify probe
2026-08-06 23:38 [PATCH] ASoC: xilinx: formatter_pcm: use devm_clk_get_enabled and simplify probe Rosen Penev
@ 2026-08-06 23:43 ` Mark Brown
0 siblings, 0 replies; 2+ messages in thread
From: Mark Brown @ 2026-08-06 23:43 UTC (permalink / raw)
To: Rosen Penev
Cc: linux-sound, Vincenzo Frascino, Liam Girdwood, Jaroslav Kysela,
Takashi Iwai, Michal Simek, moderated list:ARM/ZYNQ ARCHITECTURE,
open list
[-- Attachment #1: Type: text/plain, Size: 748 bytes --]
On Thu, Aug 06, 2026 at 04:38:12PM -0700, Rosen Penev wrote:
> Use devm_clk_get_enabled() to let the clock be enabled automatically
> and cleaned up on unbind, dropping the manual clk_prepare_enable() and
> clk_disable_unprepare() calls in probe and remove.
>
> Simplify the probe error paths by returning directly instead of
> jumping to clk_err, and use devm_snd_soc_register_component() return
> value directly.
>
> Assisted-by: opencode:deepseek-v4-flash-free
> ---
> sound/soc/xilinx/xlnx_formatter_pcm.c | 47 ++++++++-------------------
You've not provided a Signed-off-by for this so I can't do anything with
it, please see Documentation/process/submitting-patches.rst for details
on what this is and why it's important.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-08-06 23:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-08-06 23:38 [PATCH] ASoC: xilinx: formatter_pcm: use devm_clk_get_enabled and simplify probe Rosen Penev
2026-08-06 23:43 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox