[PATCH v9 0/3] USB prerequisites for PHY consumer/provider split

[PATCH v9 0/3] USB prerequisites for PHY consumer/provider split

[Vladimir Oltean]

"[PATCH v8 phy-next 00/31] Split Generic PHY consumer and provider API"
https://lore.kernel.org/linux-phy/20260505100523.1922388-1-vladimir.oltean@nxp.com/
became unmanageably large for a single patch series and needs to be
split per subsystem.

Here are the patches pertaining to USB extracted out of the larger
series.

Change log in individual patches.

Vladimir Oltean (3):
  usb: add missing headers transitively included by <linux/phy/phy.h>
  usb: host: tegra: avoid direct dereference of phy->dev.of_node
  usb: gadget: tegra-xudc: avoid direct dereference of phy->dev.of_node

 drivers/usb/chipidea/ci_hdrc_imx.c   |  1 +
 drivers/usb/core/hcd.c               |  1 +
 drivers/usb/dwc3/dwc3-generic-plat.c |  1 +
 drivers/usb/dwc3/dwc3-imx.c          |  1 +
 drivers/usb/dwc3/gadget.c            |  1 +
 drivers/usb/gadget/udc/tegra-xudc.c  | 43 +++++++++++++++++++++-------
 drivers/usb/host/xhci-tegra.c        | 43 +++++++++++++++++-----------
 7 files changed, 64 insertions(+), 27 deletions(-)

-- 
2.34.1

[PATCH v9 1/3] usb: add missing headers transitively included by <linux/phy/phy.h>

[Vladimir Oltean]

The chipidea ci_hdrc_imx driver uses regulator consumer API like
regulator_enable() but does not include <linux/regulator/consumer.h>.

The core USB HCD driver calls invalidate_kernel_vmap_range() and
flush_kernel_vmap_range(), but does not include <linux/highmem.h>.

The DWC3 gadget driver calls:
- device_property_present()
- device_property_count_u8()
- device_property_read_u8_array()
but does not include <linux/property.h>

Similarly, dwc3-imx uses device_property_read_bool() without including
<linux/property.h>.

The dwc3-generic-plat driver uses of_device_get_match_data() but does
not include <linux/of.h>.

In all these cases, the necessary includes were still provided somehow,
directly or indirectly, through <linux/phy/phy.h>. I found the following
command to be quite helpful in figuring out the include chain:

$ make KCFLAGS="-H" drivers/usb/dwc3/dwc3-imx.o

Since <linux/phy/phy.h> wants to drop the unnecessary includes, fill in
the required headers to avoid any breakage.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> # dwc3
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: Xu Yang <xu.yang_2@nxp.com>

v7->v9: none
v6->v7:
- add drivers/usb/dwc3/dwc3-imx.c to the list of patched files
- collect tag from Greg, keeping it despite the new addition because the
  change is minor and in the same spirit as the rest
(https://lore.kernel.org/linux-phy/2026033028-squint-yield-4c23@gregkh/)
v2->v6: none
v1->v2: collect tag
---
 drivers/usb/chipidea/ci_hdrc_imx.c   | 1 +
 drivers/usb/core/hcd.c               | 1 +
 drivers/usb/dwc3/dwc3-generic-plat.c | 1 +
 drivers/usb/dwc3/dwc3-imx.c          | 1 +
 drivers/usb/dwc3/gadget.c            | 1 +
 5 files changed, 5 insertions(+)

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 282314eea7fc..1509b8ec630c 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pm_qos.h>
+#include <linux/regulator/consumer.h>
 
 #include "ci.h"
 #include "ci_hdrc_imx.h"
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 8e8a5f59b319..f7def9b116e0 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/bcd.h>
+#include <linux/highmem.h>
 #include <linux/module.h>
 #include <linux/version.h>
 #include <linux/kernel.h>
diff --git a/drivers/usb/dwc3/dwc3-generic-plat.c b/drivers/usb/dwc3/dwc3-generic-plat.c
index ca69ac0eb07c..2f2ae6f4704f 100644
--- a/drivers/usb/dwc3/dwc3-generic-plat.c
+++ b/drivers/usb/dwc3/dwc3-generic-plat.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/regmap.h>
diff --git a/drivers/usb/dwc3/dwc3-imx.c b/drivers/usb/dwc3/dwc3-imx.c
index 973a486b544d..6e122674edaf 100644
--- a/drivers/usb/dwc3/dwc3-imx.c
+++ b/drivers/usb/dwc3/dwc3-imx.c
@@ -13,6 +13,7 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 
 #include "core.h"
 #include "glue.h"
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index fa0f16ffafef..e70c17d50db8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
-- 
2.34.1

[PATCH v9 2/3] usb: host: tegra: avoid direct dereference of phy->dev.of_node

[Vladimir Oltean]

A piece of context which seems relevant here is that the USB subsystem
is transitioning from struct usb_phy to struct phy (belonging to the
Generic PHY subsystem). Commit 1a229d8690a0 ("Revert "usb: phy: add usb
phy notify port status API"") seems to confirm that this is the case.

In the transition process, some PHY provider drivers register themselves
as both Generic PHY and USB PHY in an attempt to bridge the API gap.
Such is the case with drivers/phy/tegra/xusb.c, accessed here by the
Tegra USB host driver. This USB host expects the PHY device behind the
Generic PHY to also be a USB PHY, and calls
devm_usb_get_phy_by_node(phy->dev.of_node).

The Generic PHY exposes no API to get the OF node from a PHY device, so
the Tegra USB host driver gets it directly. However, "struct phy" will
be made an opaque pointer, to avoid misuse, so this will no longer be
possible.

Considering the fact that the Generic PHY/USB PHY duality is a
transitional state, I am deliberately not planning to make the life of
this driver any easier by providing a helper to get to the OF node
somehow. Instead, implement a parallel lookup path through which the
Tegra USB host driver can continue to get to the OF node provided by the
padctl component, using the 'phys' phandle.

Secondly (minor issue) the driver uses the phy->dev.of_node again to
print using dev_dbg() that a "remote wake" was detected. Just print the
index at which the PHY appears inside the driver's tegra->phys[] array
instead.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: JC Kuo <jckuo@nvidia.com>
Cc: Johan Hovold <johan+linaro@kernel.org>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>

v8->v9: none
v7->v8:
- add missing of_node_put(args.np) in tegra_xusb_init_usb_phy()
- replace %d with %u in tegra_xhci_disable_phy_wake()
Both pointed out by Sashiko.

v5->v7: none
v4->v5: patch is new
---
 drivers/usb/host/xhci-tegra.c | 43 ++++++++++++++++++++++-------------
 1 file changed, 27 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index e7e6d569f1db..4d85702ad42f 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1502,6 +1502,7 @@ static int tegra_xhci_id_notify(struct notifier_block *nb,
 
 static int tegra_xusb_init_usb_phy(struct tegra_xusb *tegra)
 {
+	struct device_node *np = dev_of_node(tegra->dev);
 	unsigned int i;
 
 	tegra->usbphy = devm_kcalloc(tegra->dev, tegra->num_usb_phys,
@@ -1515,23 +1516,34 @@ static int tegra_xusb_init_usb_phy(struct tegra_xusb *tegra)
 	tegra->otg_usb3_port = -EINVAL;
 
 	for (i = 0; i < tegra->num_usb_phys; i++) {
-		struct phy *phy = tegra_xusb_get_phy(tegra, "usb2", i);
+		struct of_phandle_args args;
+		struct usb_phy *usbphy;
+		int index, err;
+		char prop[8];
 
-		if (!phy)
+		snprintf(prop, sizeof(prop), "usb2-%d", i);
+
+		/*
+		 * usb-phy is optional, continue if it's not available.
+		 */
+		index = of_property_match_string(np, "phy-names", prop);
+		if (index < 0)
 			continue;
 
-		tegra->usbphy[i] = devm_usb_get_phy_by_node(tegra->dev,
-							phy->dev.of_node,
-							&tegra->id_nb);
-		if (!IS_ERR(tegra->usbphy[i])) {
-			dev_dbg(tegra->dev, "usbphy-%d registered", i);
-			otg_set_host(tegra->usbphy[i]->otg, &tegra->hcd->self);
-		} else {
-			/*
-			 * usb-phy is optional, continue if its not available.
-			 */
-			tegra->usbphy[i] = NULL;
-		}
+		err = of_parse_phandle_with_args(np, "phys", "#phy-cells",
+						 index, &args);
+		if (err)
+			continue;
+
+		usbphy = devm_usb_get_phy_by_node(tegra->dev, args.np,
+						  &tegra->id_nb);
+		of_node_put(args.np);
+		if (IS_ERR(usbphy))
+			continue;
+
+		tegra->usbphy[i] = usbphy;
+		dev_dbg(tegra->dev, "usbphy-%d registered", i);
+		otg_set_host(tegra->usbphy[i]->otg, &tegra->hcd->self);
 	}
 
 	return 0;
@@ -2186,8 +2198,7 @@ static void tegra_xhci_disable_phy_wake(struct tegra_xusb *tegra)
 			continue;
 
 		if (tegra_xusb_padctl_remote_wake_detected(padctl, tegra->phys[i]))
-			dev_dbg(tegra->dev, "%pOF remote wake detected\n",
-				tegra->phys[i]->dev.of_node);
+			dev_dbg(tegra->dev, "PHY %u remote wake detected\n", i);
 
 		tegra_xusb_padctl_disable_phy_wake(padctl, tegra->phys[i]);
 	}
-- 
2.34.1

[PATCH v9 3/3] usb: gadget: tegra-xudc: avoid direct dereference of phy->dev.of_node

[Vladimir Oltean]

In a somewhat similar situation as the Tegra USB host controller driver,
the Tegra XUDC driver for USB gadget mode needs to get to a struct
usb_phy that sits behind the same OF node as the Generic PHY. It does
that directly, which will no longer be possible. The PHY provider is
also the xusb padctl driver.

The rework here is also to implement a parallel OF node lookup path
based on the "phys" phandle and the #phy-cells of the padctl provider.

Some further notes:
- create a local "usbphy" variable to hold the devm_usb_get_phy_by_node()
  output. This makes the error checks more obvious (avoids keeping an
  error-encoded pointer in xudc->usbphy[i] even temporarily).
- the "if (IS_ERR(utmi_phy)) .. else if (utmi_phy) .. else if (!utmi_phy)"
  pattern can be simplified, considering that neither the IS_ERR() nor
  the NULL case continue execution in the current block. Therefore, we
  can move the case where the "utmi_phy" is a valid pointer outside the
  "if" checks, and this reduces the code indentation level.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: JC Kuo <jckuo@nvidia.com>
Cc: Johan Hovold <johan+linaro@kernel.org>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>

v8->v9: none
v7->v8:
- remove duplicated variable "err" which shadows existing one
- stop execution on of_property_match_string() and
  of_parse_phandle_with_args() errors, instead of silently continuing
v5->v7: none
v4->v5: patch is new
---
 drivers/usb/gadget/udc/tegra-xudc.c | 43 +++++++++++++++++++++--------
 1 file changed, 32 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
index e9d33be02866..f93e0a5651ab 100644
--- a/drivers/usb/gadget/udc/tegra-xudc.c
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -3494,6 +3494,7 @@ static void tegra_xudc_device_params_init(struct tegra_xudc *xudc)
 
 static int tegra_xudc_phy_get(struct tegra_xudc *xudc)
 {
+	struct device_node *np = dev_of_node(xudc->dev);
 	int err = 0, usb3_companion_port;
 	unsigned int i, j;
 
@@ -3515,7 +3516,10 @@ static int tegra_xudc_phy_get(struct tegra_xudc *xudc)
 	xudc->vbus_nb.notifier_call = tegra_xudc_vbus_notify;
 
 	for (i = 0; i < xudc->soc->num_phys; i++) {
+		struct of_phandle_args args;
 		char phy_name[] = "usb.-.";
+		struct usb_phy *usbphy;
+		int index;
 
 		/* Get USB2 phy */
 		snprintf(phy_name, sizeof(phy_name), "usb2-%d", i);
@@ -3525,22 +3529,39 @@ static int tegra_xudc_phy_get(struct tegra_xudc *xudc)
 			dev_err_probe(xudc->dev, err,
 				"failed to get PHY for phy-name usb2-%d\n", i);
 			goto clean_up;
-		} else if (xudc->utmi_phy[i]) {
-			/* Get usb-phy, if utmi phy is available */
-			xudc->usbphy[i] = devm_usb_get_phy_by_node(xudc->dev,
-						xudc->utmi_phy[i]->dev.of_node,
-						NULL);
-			if (IS_ERR(xudc->usbphy[i])) {
-				err = PTR_ERR(xudc->usbphy[i]);
-				dev_err_probe(xudc->dev, err,
-					      "failed to get usbphy-%d\n", i);
-				goto clean_up;
-			}
 		} else if (!xudc->utmi_phy[i]) {
 			/* if utmi phy is not available, ignore USB3 phy get */
 			continue;
 		}
 
+		index = of_property_match_string(np, "phy-names", phy_name);
+		if (index < 0) {
+			dev_err(xudc->dev,
+				"no \"phy-names\" entry for \"%s\": %pe\n",
+				phy_name, ERR_PTR(index));
+			goto clean_up;
+		}
+
+		err = of_parse_phandle_with_args(np, "phys", "#phy-cells",
+						 index, &args);
+		if (err) {
+			dev_err(xudc->dev,
+				"failed to follow \"%s\" reference\n: %pe\n",
+				phy_name, ERR_PTR(err));
+			goto clean_up;
+		}
+
+		/* Get usb-phy, if utmi phy is available */
+		usbphy = devm_usb_get_phy_by_node(xudc->dev, args.np, NULL);
+		of_node_put(args.np);
+		if (IS_ERR(usbphy)) {
+			err = PTR_ERR(usbphy);
+			dev_err_probe(xudc->dev, err,
+				      "failed to get usbphy-%d\n", i);
+			goto clean_up;
+		}
+		xudc->usbphy[i] = usbphy;
+
 		/* Get USB3 phy */
 		usb3_companion_port = tegra_xusb_padctl_get_usb3_companion(xudc->padctl, i);
 		if (usb3_companion_port < 0)
-- 
2.34.1

Re: [PATCH v9 1/3] usb: add missing headers transitively included by <linux/phy/phy.h>

[Frank Li]

On Mon, Aug 10, 2026 at 03:56:12PM +0300, Vladimir Oltean wrote:
> The chipidea ci_hdrc_imx driver uses regulator consumer API like
> regulator_enable() but does not include <linux/regulator/consumer.h>.
>
> The core USB HCD driver calls invalidate_kernel_vmap_range() and
> flush_kernel_vmap_range(), but does not include <linux/highmem.h>.
>
> The DWC3 gadget driver calls:
> - device_property_present()
> - device_property_count_u8()
> - device_property_read_u8_array()
> but does not include <linux/property.h>
>
> Similarly, dwc3-imx uses device_property_read_bool() without including
> <linux/property.h>.
>
> The dwc3-generic-plat driver uses of_device_get_match_data() but does
> not include <linux/of.h>.
>
> In all these cases, the necessary includes were still provided somehow,
> directly or indirectly, through <linux/phy/phy.h>. I found the following
> command to be quite helpful in figuring out the include chain:
>
> $ make KCFLAGS="-H" drivers/usb/dwc3/dwc3-imx.o
>
> Since <linux/phy/phy.h> wants to drop the unnecessary includes, fill in
> the required headers to avoid any breakage.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> # dwc3
> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
> Cc: Peter Chen <peter.chen@kernel.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Frank Li <Frank.Li@nxp.com>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
> Cc: Xu Yang <xu.yang_2@nxp.com>
>
> v7->v9: none
> v6->v7:
> - add drivers/usb/dwc3/dwc3-imx.c to the list of patched files
> - collect tag from Greg, keeping it despite the new addition because the
>   change is minor and in the same spirit as the rest
> (https://lore.kernel.org/linux-phy/2026033028-squint-yield-4c23@gregkh/)
> v2->v6: none
> v1->v2: collect tag
> ---
>  drivers/usb/chipidea/ci_hdrc_imx.c   | 1 +
>  drivers/usb/core/hcd.c               | 1 +
>  drivers/usb/dwc3/dwc3-generic-plat.c | 1 +
>  drivers/usb/dwc3/dwc3-imx.c          | 1 +
>  drivers/usb/dwc3/gadget.c            | 1 +
>  5 files changed, 5 insertions(+)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index 282314eea7fc..1509b8ec630c 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -17,6 +17,7 @@
>  #include <linux/clk.h>
>  #include <linux/pinctrl/consumer.h>
>  #include <linux/pm_qos.h>
> +#include <linux/regulator/consumer.h>
>
>  #include "ci.h"
>  #include "ci_hdrc_imx.h"
> diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
> index 8e8a5f59b319..f7def9b116e0 100644
> --- a/drivers/usb/core/hcd.c
> +++ b/drivers/usb/core/hcd.c
> @@ -10,6 +10,7 @@
>   */
>
>  #include <linux/bcd.h>
> +#include <linux/highmem.h>
>  #include <linux/module.h>
>  #include <linux/version.h>
>  #include <linux/kernel.h>
> diff --git a/drivers/usb/dwc3/dwc3-generic-plat.c b/drivers/usb/dwc3/dwc3-generic-plat.c
> index ca69ac0eb07c..2f2ae6f4704f 100644
> --- a/drivers/usb/dwc3/dwc3-generic-plat.c
> +++ b/drivers/usb/dwc3/dwc3-generic-plat.c
> @@ -8,6 +8,7 @@
>   */
>
>  #include <linux/clk.h>
> +#include <linux/of.h>
>  #include <linux/platform_device.h>
>  #include <linux/reset.h>
>  #include <linux/regmap.h>
> diff --git a/drivers/usb/dwc3/dwc3-imx.c b/drivers/usb/dwc3/dwc3-imx.c
> index 973a486b544d..6e122674edaf 100644
> --- a/drivers/usb/dwc3/dwc3-imx.c
> +++ b/drivers/usb/dwc3/dwc3-imx.c
> @@ -13,6 +13,7 @@
>  #include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/property.h>
>
>  #include "core.h"
>  #include "glue.h"
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index fa0f16ffafef..e70c17d50db8 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -10,6 +10,7 @@
>
>  #include <linux/kernel.h>
>  #include <linux/delay.h>
> +#include <linux/property.h>
>  #include <linux/slab.h>
>  #include <linux/spinlock.h>
>  #include <linux/platform_device.h>
> --
> 2.34.1
>
>