From: Frank Li <Frank.li@oss.nxp.com>
To: Sasha Finkelstein <k@chaosmail.tech>
Cc: "Sven Peter" <sven@kernel.org>, "Janne Grunau" <j@jannau.net>,
"Vinod Koul" <vkoul@kernel.org>, "Frank Li" <Frank.Li@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Martin Povišer" <povik+lin@cutebit.org>,
asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
dmaengine@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 2/2] dmaengine: apple-admac: Add M3 generation ADMACs
Date: Mon, 17 Aug 2026 11:03:32 -0500 [thread overview]
Message-ID: <aoMw1AkJYMcaOBHH@SMW015318> (raw)
In-Reply-To: <20260815-t603x-admac-v4-2-1149e342dcb0@chaosmail.tech>
On Sat, Aug 15, 2026 at 12:41:39PM +0200, Sasha Finkelstein wrote:
> The admacs present on t8122 and t603x SoCs need additional writes in
> order to operate correctly. The exact purpose of this register
> is unknown
Nit: miss "." at end of sentense.
>
> Signed-off-by: Sasha Finkelstein <k@chaosmail.tech>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> drivers/dma/apple-admac.c | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/drivers/dma/apple-admac.c b/drivers/dma/apple-admac.c
> index 14a5ee14a481..9a1c79c12268 100644
> --- a/drivers/dma/apple-admac.c
> +++ b/drivers/dma/apple-admac.c
> @@ -39,10 +39,14 @@
>
> #define FLAG_DESC_NOTIFY BIT(16)
>
> +#define T8122_UNK_28_VAL 0x200000
> +
> #define REG_TX_START 0x0000
> #define REG_TX_STOP 0x0004
> #define REG_RX_START 0x0008
> #define REG_RX_STOP 0x000c
> +#define REG_UNK_28 0x0028
> +#define REG_UNK_2C 0x002c
> #define REG_IMPRINT 0x0090
> #define REG_TX_SRAM_SIZE 0x0094
> #define REG_RX_SRAM_SIZE 0x0098
> @@ -85,6 +89,10 @@
> struct admac_data;
> struct admac_tx;
>
> +struct admac_hw {
> + bool set_unk28;
> +};
> +
> struct admac_chan {
> unsigned int no;
> struct admac_data *host;
> @@ -127,6 +135,7 @@ struct admac_data {
> struct mutex cache_alloc_lock;
> struct admac_sram txcache, rxcache;
>
> + const struct admac_hw *hw;
> int irq;
> int irq_index;
> int nchannels;
> @@ -747,6 +756,11 @@ static int admac_device_config(struct dma_chan *chan,
> u32 bus_width = readl_relaxed(ad->base + REG_BUS_WIDTH(adchan->no)) &
> ~(BUS_WIDTH_WORD_SIZE | BUS_WIDTH_FRAME_SIZE);
>
> + if (ad->hw->set_unk28) {
> + writel_relaxed(T8122_UNK_28_VAL, ad->base + REG_UNK_28);
> + writel_relaxed(T8122_UNK_28_VAL, ad->base + REG_UNK_2C);
> + }
> +
> switch (is_tx ? config->dst_addr_width : config->src_addr_width) {
> case DMA_SLAVE_BUSWIDTH_1_BYTE:
> wordsize = 1;
> @@ -800,11 +814,18 @@ static int admac_device_config(struct dma_chan *chan,
> return 0;
> }
>
> +static const struct admac_hw admac_base_hw = {};
> +
> +static const struct admac_hw admac_t8122_hw = {
> + .set_unk28 = true,
> +};
> +
> static int admac_probe(struct platform_device *pdev)
> {
> struct device_node *np = pdev->dev.of_node;
> struct admac_data *ad;
> struct dma_device *dma;
> + const struct admac_hw *hw;
> int nchannels;
> int err, irq, i;
>
> @@ -822,6 +843,8 @@ static int admac_probe(struct platform_device *pdev)
> ad->dev = &pdev->dev;
> ad->nchannels = nchannels;
> mutex_init(&ad->cache_alloc_lock);
> + hw = of_device_get_match_data(&pdev->dev);
> + ad->hw = hw ? hw : &admac_base_hw;
>
> /*
> * The controller has 4 IRQ outputs. Try them all until
> @@ -936,6 +959,7 @@ static void admac_remove(struct platform_device *pdev)
> }
>
> static const struct of_device_id admac_of_match[] = {
> + { .compatible = "apple,t8122-admac", .data = &admac_t8122_hw },
> { .compatible = "apple,t8103-admac", },
> { .compatible = "apple,admac", },
> { }
>
> --
> 2.55.0
>
prev parent reply other threads:[~2026-08-17 16:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-15 10:41 [PATCH v4 0/2] dmaengine: apple-admac: Add support for M3 generation Sasha Finkelstein
2026-08-15 10:41 ` [PATCH v4 1/2] dt-bindings: dma: apple,admac: Add M3 generation ADMACs Sasha Finkelstein
2026-08-17 16:01 ` Frank Li
2026-08-15 10:41 ` [PATCH v4 2/2] dmaengine: apple-admac: " Sasha Finkelstein
2026-08-17 16:03 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aoMw1AkJYMcaOBHH@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=asahi@lists.linux.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=j@jannau.net \
--cc=k@chaosmail.tech \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=povik+lin@cutebit.org \
--cc=robh@kernel.org \
--cc=sven@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox