From: Frank Li <Frank.li@oss.nxp.com>
To: Nas Chung <nas.chung@chipsnmedia.com>
Cc: mchehab@kernel.org, hverkuil@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, Frank.Li@nxp.com,
s.hauer@pengutronix.de, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
festevam@gmail.com, kernel@pengutronix.de,
nicolas.dufresne@collabora.com, ming.qian@oss.nxp.com,
marek.vasut@mailbox.org, jackson.lee@chipsnmedia.com,
lafley.kim@chipsnmedia.com
Subject: Re: [PATCH v8 11/11] arm64: dts: freescale: imx95: Add video codec node
Date: Thu, 19 Nov 2026 15:05:06 -0600 [thread overview]
Message-ID: <av9kgix0B4irkC1h@SMW015318> (raw)
In-Reply-To: <e89f330486c8b986088278b563d0c4364d35f19b.1795075582.git.nas.chung@chipsnmedia.com>
On Thu, Nov 19, 2026 at 06:00:05PM +0900, Nas Chung wrote:
> Add the Chips and Media wave633 video codec node on IMX95 SoCs.
>
> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
> ---
> .../boot/dts/freescale/imx95-19x19-evk.dts | 10 +++++
> arch/arm64/boot/dts/freescale/imx95.dtsi | 37 +++++++++++++++++++
Please split two patch, one patch touch soc dtsi, the another touch board.
Frank
> 2 files changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> index 47ed0ef67611..a15d5b471708 100644
> --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> @@ -143,6 +143,11 @@ vdev0buffer: vdev0buffer@88020000 {
> reg = <0 0x88020000 0 0x100000>;
> no-map;
> };
> +
> + vpu_boot: memory@a0000000 {
> + reg = <0 0xa0000000 0 0x100000>;
> + no-map;
> + };
> };
>
> flexcan1_phy: can-phy0 {
> @@ -1225,3 +1230,8 @@ &tpm6 {
> pinctrl-0 = <&pinctrl_tpm6>;
> status = "okay";
> };
> +
> +&vpu {
> + memory-region = <&vpu_boot>;
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
> index d20c2498b9aa..b6323e527ab7 100644
> --- a/arch/arm64/boot/dts/freescale/imx95.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
> @@ -2139,6 +2139,43 @@ vpu_blk_ctrl: clock-controller@4c410000 {
> assigned-clock-rates = <133333333>, <667000000>, <500000000>;
> };
>
> + vpu: video-codec@4c4c0000 {
> + compatible = "nxp,imx95-vpu";
> + reg = <0x0 0x4c4c0000 0x0 0x10000>;
> + clocks = <&scmi_clk IMX95_CLK_VPU>,
> + <&vpu_blk_ctrl IMX95_CLK_VPUBLK_WAVE>;
> + clock-names = "core", "vpublk";
> + power-domains = <&scmi_devpd IMX95_PD_VPU>,
> + <&scmi_perf IMX95_PERF_VPU>;
> + power-domain-names = "vpu", "perf";
> + sram = <&sram1>;
> + #cooling-cells = <2>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + status = "disabled";
> +
> + interface@4c480000 {
> + reg = <0x0 0x4c480000 0x0 0x10000>;
> + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + interface@4c490000 {
> + reg = <0x0 0x4c490000 0x0 0x10000>;
> + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + interface@4c4a0000 {
> + reg = <0x0 0x4c4a0000 0x0 0x10000>;
> + interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + interface@4c4b0000 {
> + reg = <0x0 0x4c4b0000 0x0 0x10000>;
> + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> jpegdec: jpegdec@4c500000 {
> compatible = "nxp,imx95-jpgdec", "nxp,imx8qxp-jpgdec";
> reg = <0x0 0x4C500000 0x0 0x00050000>;
> --
> 2.41.0.windows.3
>
>
prev parent reply other threads:[~2026-11-19 21:05 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 8:59 [PATCH v8 00/11] Add support for Wave6 video codec driver Nas Chung
2026-11-19 8:59 ` [PATCH v8 01/11] dt-bindings: media: nxp: Add Wave6 video codec device Nas Chung
2026-11-19 8:59 ` [PATCH v8 02/11] media: chips-media: wave6: Add Wave6 control driver Nas Chung
2026-11-19 20:07 ` Frank Li
2026-11-19 8:59 ` [PATCH v8 03/11] media: chips-media: wave6: Add Wave6 core driver Nas Chung
2026-11-19 20:27 ` Frank Li
2026-11-19 8:59 ` [PATCH v8 04/11] media: chips-media: wave6: Add Wave6 decoder firmware interface Nas Chung
2026-11-19 20:37 ` Frank Li
2026-11-19 8:59 ` [PATCH v8 05/11] media: chips-media: wave6: Add Wave6 m2m decoder Nas Chung
2026-11-19 9:00 ` [PATCH v8 06/11] media: chips-media: wave6: Add Wave6 encoder firmware interface Nas Chung
2026-11-19 9:00 ` [PATCH v8 07/11] media: chips-media: wave6: Add Wave6 m2m encoder Nas Chung
2026-11-19 9:00 ` [PATCH v8 08/11] media: chips-media: wave6: Add trace and debugfs Nas Chung
2026-11-19 9:00 ` [PATCH v8 09/11] media: chips-media: wave6: Add performance profiling Nas Chung
2026-11-19 20:56 ` Frank Li
2026-11-19 9:00 ` [PATCH v8 10/11] media: chips-media: wave6: Add Wave6 thermal cooling device Nas Chung
2026-11-19 21:03 ` Frank Li
2026-11-19 9:00 ` [PATCH v8 11/11] arm64: dts: freescale: imx95: Add video codec node Nas Chung
2026-11-19 21:05 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=av9kgix0B4irkC1h@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=hverkuil@kernel.org \
--cc=imx@lists.linux.dev \
--cc=jackson.lee@chipsnmedia.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=lafley.kim@chipsnmedia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=marek.vasut@mailbox.org \
--cc=mchehab@kernel.org \
--cc=ming.qian@oss.nxp.com \
--cc=nas.chung@chipsnmedia.com \
--cc=nicolas.dufresne@collabora.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox