From: "J, KEERTHY" <j-keerthy@ti.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
<robh+dt@kernel.org>, <nm@ti.com>, <vigneshr@ti.com>,
<conor+dt@kernel.org>, <kristo@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>
Cc: <u-kumar1@ti.com>, <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v5 4/7] arm64: dts: ti: k3-j784s4-main: Add the main domain watchdog instances
Date: Wed, 27 Sep 2023 13:53:55 +0530 [thread overview]
Message-ID: <b7c87a3a-32ef-fe58-0cf2-230100f377d5@ti.com> (raw)
In-Reply-To: <0c709939-9867-4d80-ba7e-640b594f8d7a@linaro.org>
On 9/27/2023 1:24 PM, Krzysztof Kozlowski wrote:
> On 26/09/2023 15:28, Keerthy wrote:
>> There are totally 19 instances of watchdog module. One each for the
>> 8 A72 cores, one each for the 4 C7x cores, 1 for the GPU, 1 each
>> for the 6 R5F cores in the main domain. Keeping only the A72 instances
>> enabled and disabling the rest by default.
>>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> ---
>> arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 182 +++++++++++++++++++++
>> 1 file changed, 182 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> index 26dc3776f911..8c3efe066803 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
>> @@ -1576,4 +1576,186 @@
>> <695>;
>> bootph-pre-ram;
>> };
>> +
>> + watchdog0: watchdog@2200000 {
>> + compatible = "ti,j7-rti-wdt";
>> + reg = <0x00 0x2200000 0x00 0x100>;
>> + clocks = <&k3_clks 348 1>;
>> + power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>;
>> + assigned-clocks = <&k3_clks 348 0>;
>> + assigned-clock-parents = <&k3_clks 348 4>;
>> + };
>> +
>> + watchdog1: watchdog@2210000 {
>> + compatible = "ti,j7-rti-wdt";
>> + reg = <0x00 0x2210000 0x00 0x100>;
>> + clocks = <&k3_clks 349 1>;
>> + power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>;
>> + assigned-clocks = <&k3_clks 349 0>;
>> + assigned-clock-parents = <&k3_clks 349 4>;
>> + };
>> +
>> + watchdog2: watchdog@2220000 {
>> + compatible = "ti,j7-rti-wdt";
>> + reg = <0x00 0x2220000 0x00 0x100>;
>> + clocks = <&k3_clks 350 1>;
>> + power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>;
>> + assigned-clocks = <&k3_clks 350 0>;
>> + assigned-clock-parents = <&k3_clks 350 4>;
>> + };
>> +
>> + watchdog3: watchdog@2230000 {
>> + compatible = "ti,j7-rti-wdt";
>> + reg = <0x00 0x2230000 0x00 0x100>;
>> + clocks = <&k3_clks 351 1>;
>> + power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>;
>> + assigned-clocks = <&k3_clks 351 0>;
>> + assigned-clock-parents = <&k3_clks 351 4>;
>> + };
>> +
>> + watchdog4: watchdog@2240000 {
>> + compatible = "ti,j7-rti-wdt";
>> + reg = <0x00 0x2240000 0x00 0x100>;
>> + clocks = <&k3_clks 352 1>;
>> + power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>;
>> + assigned-clocks = <&k3_clks 352 0>;
>> + assigned-clock-parents = <&k3_clks 352 4>;
>> + };
>> +
>> + watchdog5: watchdog@2250000 {
>> + compatible = "ti,j7-rti-wdt";
>> + reg = <0x00 0x2250000 0x00 0x100>;
>> + clocks = <&k3_clks 353 1>;
>> + power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>;
>> + assigned-clocks = <&k3_clks 353 0>;
>> + assigned-clock-parents = <&k3_clks 353 4>;
>> + };
>> +
>> + watchdog6: watchdog@2260000 {
>> + compatible = "ti,j7-rti-wdt";
>> + reg = <0x00 0x2260000 0x00 0x100>;
>> + clocks = <&k3_clks 354 1>;
>> + power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>;
>> + assigned-clocks = <&k3_clks 354 0>;
>> + assigned-clock-parents = <&k3_clks 354 4>;
>> + };
>> +
>> + watchdog7: watchdog@2270000 {
>> + compatible = "ti,j7-rti-wdt";
>> + reg = <0x00 0x2270000 0x00 0x100>;
>> + clocks = <&k3_clks 355 1>;
>> + power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>;
>> + assigned-clocks = <&k3_clks 355 0>;
>> + assigned-clock-parents = <&k3_clks 355 4>;
>> + };
>> +
>> + watchdog16: watchdog@2300000 {
>> + status = "disabled";
>
> This is a friendly reminder during the review process.
>
> It seems my previous comments were not fully addressed. Maybe my
> feedback got lost between the quotes, maybe you just forgot to apply it.
> Please go back to the previous discussion and either implement all
> requested changes or keep discussing them.
Apologies. I have fixed the order in v6.
>
> Thank you.
>
> Best regards,
> Krzysztof
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-09-27 8:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-26 13:27 [PATCH v5 0/7] arm64: ti: k3-j7: Add the ESM & main domain watchdog nodes Keerthy
2023-09-26 13:27 ` [PATCH v5 1/7] arm64: dts: ti: k3-j721s2: Add ESM instances Keerthy
2023-09-26 13:28 ` [PATCH v5 2/7] arm64: dts: ti: k3-j784s4: " Keerthy
2023-09-26 13:28 ` [PATCH v5 3/7] arm64: dts: ti: k3-j7200: Add MCU domain ESM instance Keerthy
2023-09-26 13:28 ` [PATCH v5 4/7] arm64: dts: ti: k3-j784s4-main: Add the main domain watchdog instances Keerthy
2023-09-26 17:12 ` Nishanth Menon
2023-09-27 2:33 ` J, KEERTHY
2023-09-27 7:54 ` Krzysztof Kozlowski
2023-09-27 8:23 ` J, KEERTHY [this message]
2023-09-26 13:28 ` [PATCH v5 5/7] arm64: dts: ti: k3-j784s4-mcu: Add the mcu " Keerthy
2023-09-26 13:28 ` [PATCH v5 6/7] arm64: dts: ti: k3-j721s2-main: Add the main " Keerthy
2023-09-26 17:13 ` Nishanth Menon
2023-09-27 2:32 ` J, KEERTHY
2023-09-26 13:28 ` [PATCH v5 7/7] dts: ti: k3-j712s2-mcu: Add the mcu " Keerthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b7c87a3a-32ef-fe58-0cf2-230100f377d5@ti.com \
--to=j-keerthy@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox