[PATCH v4 0/3] ARM: dts: aspeed-g6: add AST2600 I3C nodes and bindings

[PATCH v4 0/3] ARM: dts: aspeed-g6: add AST2600 I3C nodes and bindings

[Dawid Glazik]

This series reworks and resubmits AST2600 I3C DTS updates that were
originally posted in 2024, but stalled without further upstream
progress.[1] The series was rebased onto the current tree and merge
conflicts were resolved.

The patches first move I2C controller nodes under the APB simple-bus
for layout consistency, then document aspeed,ast2600-i3c-global in
the syscon binding, and finally add AST2600 I3C controller nodes in
aspeed-g6.dtsi.

Jeremy agreed in a separate email thread that I can continue this
series under my authorship.

Link: https://lore.kernel.org/all/9d8c03d742fa9767f30e23d75ddf0baf4296c88e.1714647917.git.jk@codeconstruct.com.au/

Dawid Glazik (3):
  ARM: dts: aspeed-g6: move i2c controllers directly into apb node
  dt-bindings: mfd: syscon: add aspeed,ast2600-i3c-global compatible
  ARM: dts: aspeed-g6: Add nodes for i3c controllers

 .../devicetree/bindings/mfd/syscon.yaml       |   2 +
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi       | 543 ++++++++++--------
 2 files changed, 318 insertions(+), 227 deletions(-)


base-commit: 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f
-- 
2.43.0

[PATCH v4 1/3] ARM: dts: aspeed-g6: move i2c controllers directly into apb node

[Dawid Glazik]

We currently have the apb's mapping of the i2c controller space as a
labelled mostly-empty node:

  apb {
    i2c: bus@1e78a000 {
      ranges = <...>;
    };
  }

... and then define the contents of the i2c block later:

  i2c: {
    i2c0: i2c-bus@80 {
      reg = <0x80 0x80>;
    };
    i2c1: i2c-bus@100 {
      reg = <0x100 0x80>;
    };
  }

Krzysztof mentions[1] that isn't convention though, with the top-level
simple-bus being empty and linked via the label. So, drop the label
usage and move the i2c bus definition into the simple-bus node directly
under the apb:

  apb {
     bus@1e78a000 {
      ranges = <...>;

      i2c0: i2c-bus@80 {
        reg = <0x80 0x80>;
      };
      i2c1: i2c-bus@100 {
        reg = <0x100 0x80>;
      };
    };
  }

This will allow us to be consistent when we add new definitions for the
i3c nodes, which would require the latter format.

Link: https://lore.kernel.org/linux-devicetree/c5331cf8-7295-4e6a-ba39-e0751a2c357e@kernel.org/ [1]
Suggested-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Dawid Glazik <dawid.glazik@linux.intel.com>
---
v3:
 - pick up series after two years
 - rebase on top of latest tree and solve conflicts
 - as agreed with Jeremy off-list, he said I can take authorship of this going forward
v2:
 - new patch: reorganise i2c nodes before adding new-format i3c nodes
---
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 452 ++++++++++++------------
 1 file changed, 225 insertions(+), 227 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 189bc3bbb47c..f5641128614f 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -835,11 +835,235 @@ uart9: serial@1e790300 {
 				status = "disabled";
 			};
 
-			i2c: bus@1e78a000 {
+			bus@1e78a000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0 0x1e78a000 0x1000>;
+
+				i2c0: i2c@80 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x80 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c1_default>;
+					status = "disabled";
+				};
+
+				i2c1: i2c@100 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x100 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c2_default>;
+					status = "disabled";
+				};
+
+				i2c2: i2c@180 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x180 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c3_default>;
+					status = "disabled";
+				};
+
+				i2c3: i2c@200 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x200 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c4_default>;
+					status = "disabled";
+				};
+
+				i2c4: i2c@280 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x280 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c5_default>;
+					status = "disabled";
+				};
+
+				i2c5: i2c@300 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x300 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c6_default>;
+					status = "disabled";
+				};
+
+				i2c6: i2c@380 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x380 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c7_default>;
+					status = "disabled";
+				};
+
+				i2c7: i2c@400 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x400 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c8_default>;
+					status = "disabled";
+				};
+
+				i2c8: i2c@480 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x480 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c9_default>;
+					status = "disabled";
+				};
+
+				i2c9: i2c@500 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x500 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c10_default>;
+					status = "disabled";
+				};
+
+				i2c10: i2c@580 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x580 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c11_default>;
+					status = "disabled";
+				};
+
+				i2c11: i2c@600 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x600 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c12_default>;
+					status = "disabled";
+				};
+
+				i2c12: i2c@680 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x680 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c13_default>;
+					status = "disabled";
+				};
+
+				i2c13: i2c@700 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x700 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c14_default>;
+					status = "disabled";
+				};
+
+				i2c14: i2c@780 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x780 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c15_default>;
+					status = "disabled";
+				};
+
+				i2c15: i2c@800 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x800 0x80>;
+					compatible = "aspeed,ast2600-i2c-bus";
+					clocks = <&syscon ASPEED_CLK_APB2>;
+					resets = <&syscon ASPEED_RESET_I2C>;
+					interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+					bus-frequency = <100000>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i2c16_default>;
+					status = "disabled";
+				};
 			};
 
 			fsim0: fsi@1e79b000 {
@@ -870,229 +1094,3 @@ fsim1: fsi@1e79b100 {
 };
 
 #include "aspeed-g6-pinctrl.dtsi"
-
-&i2c {
-	i2c0: i2c@80 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x80 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1_default>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@100 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x100 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2_default>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@180 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x180 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3_default>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@200 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x200 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c4_default>;
-		status = "disabled";
-	};
-
-	i2c4: i2c@280 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x280 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c5_default>;
-		status = "disabled";
-	};
-
-	i2c5: i2c@300 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x300 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c6_default>;
-		status = "disabled";
-	};
-
-	i2c6: i2c@380 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x380 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c7_default>;
-		status = "disabled";
-	};
-
-	i2c7: i2c@400 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x400 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c8_default>;
-		status = "disabled";
-	};
-
-	i2c8: i2c@480 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x480 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c9_default>;
-		status = "disabled";
-	};
-
-	i2c9: i2c@500 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x500 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c10_default>;
-		status = "disabled";
-	};
-
-	i2c10: i2c@580 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x580 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c11_default>;
-		status = "disabled";
-	};
-
-	i2c11: i2c@600 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x600 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c12_default>;
-		status = "disabled";
-	};
-
-	i2c12: i2c@680 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x680 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c13_default>;
-		status = "disabled";
-	};
-
-	i2c13: i2c@700 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x700 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c14_default>;
-		status = "disabled";
-	};
-
-	i2c14: i2c@780 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x780 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c15_default>;
-		status = "disabled";
-	};
-
-	i2c15: i2c@800 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x800 0x80>;
-		compatible = "aspeed,ast2600-i2c-bus";
-		clocks = <&syscon ASPEED_CLK_APB2>;
-		resets = <&syscon ASPEED_RESET_I2C>;
-		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-		bus-frequency = <100000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c16_default>;
-		status = "disabled";
-	};
-};
-- 
2.43.0

[PATCH v4 2/3] dt-bindings: mfd: syscon: add aspeed,ast2600-i3c-global compatible

[Dawid Glazik]

Add aspeed,ast2600-i3c-global to the syscon binding compatible
lists to document the AST2600 I3C global register syscon node.

Signed-off-by: Dawid Glazik <dawid.glazik@linux.intel.com>
---
 Documentation/devicetree/bindings/mfd/syscon.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index e57add2bacd3..50c07038122f 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -49,6 +49,7 @@ select:
           - apm,xgene-mcb
           - apm,xgene-rb
           - apm,xgene-scu
+          - aspeed,ast2600-i3c-global
           - atmel,sama5d2-sfrbu
           - atmel,sama5d3-nfc-io
           - atmel,sama5d3-sfrbu
@@ -161,6 +162,7 @@ properties:
               - apm,xgene-mcb
               - apm,xgene-rb
               - apm,xgene-scu
+              - aspeed,ast2600-i3c-global
               - atmel,sama5d2-sfrbu
               - atmel,sama5d3-nfc-io
               - atmel,sama5d3-sfrbu
-- 
2.43.0

[PATCH v4 3/3] ARM: dts: aspeed-g6: Add nodes for i3c controllers

[Dawid Glazik]

Add the i3c controller devices to the ast2600 g6 common dts. We add all
6 busses to the common g6 definition, but leave disabled through the
status property, to be enabled per-platform.

Suggested-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Dawid Glazik <dawid.glazik@linux.intel.com>
---
v4:
 - removed i3c aliases
 - renamed i3c-global node name to generic: syscon
v3:
 - add i3c aliases
 - rebase on top of latest tree and solve conflicts
 - as agreed with Jeremy off-list, he said I can take authorship of this going forward
v2:
 - use inline bus representation, without the i3c: label
---
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 91 +++++++++++++++++++++++++
 1 file changed, 91 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index f5641128614f..51a6a4157f1b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -1066,6 +1066,97 @@ i2c15: i2c@800 {
 				};
 			};
 
+			bus@1e7a0000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e7a0000 0x8000>;
+
+				i3c_global: syscon@0 {
+					compatible = "aspeed,ast2600-i3c-global", "syscon";
+					reg = <0x0 0x1000>;
+					resets = <&syscon ASPEED_RESET_I3C_DMA>;
+				};
+
+				i3c0: i3c@2000 {
+					compatible = "aspeed,ast2600-i3c";
+					reg = <0x2000 0x1000>;
+					#address-cells = <3>;
+					#size-cells = <0>;
+					clocks = <&syscon ASPEED_CLK_GATE_I3C0CLK>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i3c1_default>;
+					interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+					aspeed,global-regs = <&i3c_global 0>;
+					status = "disabled";
+				};
+
+				i3c1: i3c@3000 {
+					compatible = "aspeed,ast2600-i3c";
+					reg = <0x3000 0x1000>;
+					#address-cells = <3>;
+					#size-cells = <0>;
+					clocks = <&syscon ASPEED_CLK_GATE_I3C1CLK>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i3c2_default>;
+					interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+					aspeed,global-regs = <&i3c_global 1>;
+					status = "disabled";
+				};
+
+				i3c2: i3c@4000 {
+					compatible = "aspeed,ast2600-i3c";
+					reg = <0x4000 0x1000>;
+					#address-cells = <3>;
+					#size-cells = <0>;
+					clocks = <&syscon ASPEED_CLK_GATE_I3C2CLK>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i3c3_default>;
+					interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+					aspeed,global-regs = <&i3c_global 2>;
+					status = "disabled";
+				};
+
+				i3c3: i3c@5000 {
+					compatible = "aspeed,ast2600-i3c";
+					reg = <0x5000 0x1000>;
+					#address-cells = <3>;
+					#size-cells = <0>;
+					clocks = <&syscon ASPEED_CLK_GATE_I3C3CLK>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i3c4_default>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+					aspeed,global-regs = <&i3c_global 3>;
+					status = "disabled";
+				};
+
+				i3c4: i3c@6000 {
+					compatible = "aspeed,ast2600-i3c";
+					reg = <0x6000 0x1000>;
+					#address-cells = <3>;
+					#size-cells = <0>;
+					clocks = <&syscon ASPEED_CLK_GATE_I3C4CLK>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i3c5_default>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+					aspeed,global-regs = <&i3c_global 4>;
+					status = "disabled";
+				};
+
+				i3c5: i3c@7000 {
+					compatible = "aspeed,ast2600-i3c";
+					reg = <0x7000 0x1000>;
+					#address-cells = <3>;
+					#size-cells = <0>;
+					clocks = <&syscon ASPEED_CLK_GATE_I3C5CLK>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_i3c6_default>;
+					interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+					aspeed,global-regs = <&i3c_global 5>;
+					status = "disabled";
+				};
+			};
+
 			fsim0: fsi@1e79b000 {
 				#interrupt-cells = <1>;
 				compatible = "aspeed,ast2600-fsi-master";
-- 
2.43.0

Re: [PATCH v4 2/3] dt-bindings: mfd: syscon: add aspeed,ast2600-i3c-global compatible

[Krzysztof Kozlowski]

On Fri, Apr 24, 2026 at 10:21:00PM +0200, Dawid Glazik wrote:
> Add aspeed,ast2600-i3c-global to the syscon binding compatible
> lists to document the AST2600 I3C global register syscon node.
> 
> Signed-off-by: Dawid Glazik <dawid.glazik@linux.intel.com>
> ---
>  Documentation/devicetree/bindings/mfd/syscon.yaml | 2 ++
>  1 file changed, 2 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof