[PATCH v1 00/12] arm64: dts: imx8mp-var-som-symphony: align DTS with hardware revision

[PATCH v1 00/12] arm64: dts: imx8mp-var-som-symphony: align DTS with hardware revision

[Stefano Radaelli]

This series updates the i.MX8MP VAR-SOM and Symphony device trees to
better align them with the current hardware configuration.

It adds the missing board peripherals and completes the related pinctrl,
GPIO and bus configuration.

Stefano Radaelli (12):
  arm64: dts: imx8mp-var-som-symphony: add input keys
  arm64: dts: imx8mp-var-som-symphony: enable USB support
  arm64: dts: imx8mp-var-som-symphony: add TPM support
  arm64: dts: imx8mp-var-som-symphony: add external RTC
  arm64: dts: imx8mp-var-som-symphony: enable header UARTs
  arm64: dts: imx8mp-var-som-symphony: enable PCIe
  arm64: dts: imx8mp-var-som-symphony: add HDMI support
  arm64: dts: imx8mp-var-som-symphony: add capacitive touchscreen
  arm64: dts: imx8mp-var-som-symphony: enable ECSPI2
  arm64: dts: imx8mp-var-som-symphony: keep RGB_SEL low
  arm64: dts: imx8mp-var-som-symphony: enable PWM1
  arm64: dts: freescale: imx8mp-var-som: add I2C1 bus recovery GPIOs

 .../dts/freescale/imx8mp-var-som-symphony.dts | 307 +++++++++++++++++-
 .../boot/dts/freescale/imx8mp-var-som.dtsi    |  12 +-
 2 files changed, 317 insertions(+), 2 deletions(-)


base-commit: b3c1d1631f097619f8091f0293e027c4301285d6
-- 
2.47.3

[PATCH v1 01/12] arm64: dts: imx8mp-var-som-symphony: add input keys

[Stefano Radaelli]

Add the Back, Home and Menu keys connected through the GPIO expander on
the Symphony carrier board.

Also enable the SNVS power key.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 .../dts/freescale/imx8mp-var-som-symphony.dts | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 291f65e36865..25f707012f62 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -13,6 +13,31 @@ chosen {
 		stdout-path = &uart2;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-back {
+			label = "Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -72,6 +97,10 @@ usb3-sata-sel-hog {
 	};
 };
 
+&snvs_pwrkey {
+	status = "okay";
+};
+
 /* Console */
 &uart2 {
 	pinctrl-names = "default";
-- 
2.47.3

[PATCH v1 02/12] arm64: dts: imx8mp-var-som-symphony: enable USB support

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable the USB controllers on the Symphony carrier board.

Add the PTN5150 Type-C controller for USB role switching, enable the USB3
PHYs and controllers, configure the I2C bus used by the Type-C
controller, and set the first USB port in OTG mode and the second port
in host mode.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 .../dts/freescale/imx8mp-var-som-symphony.dts | 80 ++++++++++++++++++-
 1 file changed, 79 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 25f707012f62..de1b8b842848 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -72,8 +72,11 @@ reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
 
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	/* GPIO expander */
@@ -95,6 +98,22 @@ usb3-sata-sel-hog {
 			line-name = "usb3_sata_sel";
 		};
 	};
+
+	/* USB Type-C Controller */
+	typec@3d {
+		compatible = "nxp,ptn5150";
+		reg = <0x3d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ptn5150>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+		port {
+			typec_dr_sw: endpoint {
+				remote-endpoint = <&usb3_drd_sw>;
+			};
+		};
+	};
 };
 
 &snvs_pwrkey {
@@ -108,6 +127,52 @@ &uart2 {
 	status = "okay";
 };
 
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	srp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy0 {
+	fsl,phy-comp-dis-tune-percent = <115>;
+	fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <33>;
+	fsl,phy-pcs-tx-swing-full-percent = <100>;
+	fsl,phy-tx-preemp-amp-tune-microamp = <1800>;
+	fsl,phy-tx-vboost-level-microvolt = <1156>;
+	fsl,phy-tx-vref-tune-percent = <122>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1800>;
+	fsl,phy-tx-vref-tune-percent = <116>;
+	status = "okay";
+};
+
 /* SD-card */
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
@@ -129,12 +194,25 @@ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA                                 0x400001c2
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18				0x1c2
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19				0x1c2
+		>;
+	};
+
 	pinctrl_pca9534: pca9534grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15                             0xc0
 		>;
 	};
 
+	pinctrl_ptn5150: ptn5150grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05				0x10
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                            0x40
-- 
2.47.3

[PATCH v1 03/12] arm64: dts: imx8mp-var-som-symphony: add TPM support

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the ST33KTPM2XI2C TPM device on the Symphony carrier board.

Enable the I2C4 bus, add the PCAL6408 GPIO expander used by the TPM and
describe the TPM reset line.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 .../dts/freescale/imx8mp-var-som-symphony.dts | 39 +++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index de1b8b842848..935bc71b6ee1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -116,6 +116,31 @@ typec_dr_sw: endpoint {
 	};
 };
 
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio", "sleep";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	pinctrl-2 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pcal6408: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	st33ktpm2xi2c: tpm@2e {
+		compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		label = "tpm";
+		reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -201,6 +226,20 @@ MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19				0x1c2
 		>;
 	};
 
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL					0x400001c2
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA					0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20				0x1c2
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21				0x1c2
+		>;
+	};
+
 	pinctrl_pca9534: pca9534grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15                             0xc0
-- 
2.47.3

[PATCH v1 04/12] arm64: dts: imx8mp-var-som-symphony: add external RTC

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the DS1337 RTC on the Symphony carrier board and disable the internal
SNVS RTC.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 .../arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 935bc71b6ee1..8f8c76993fb5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -139,12 +139,21 @@ st33ktpm2xi2c: tpm@2e {
 		label = "tpm";
 		reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>;
 	};
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
 };
 
 &snvs_pwrkey {
 	status = "okay";
 };
 
+&snvs_rtc {
+	status = "disabled";
+};
+
 /* Console */
 &uart2 {
 	pinctrl-names = "default";
-- 
2.47.3

[PATCH v1 05/12] arm64: dts: imx8mp-var-som-symphony: enable header UARTs

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable UART1 and UART4 on the Symphony carrier board and add the
corresponding pinctrl configurations.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 .../dts/freescale/imx8mp-var-som-symphony.dts | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 8f8c76993fb5..3dda28be92f8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -154,6 +154,13 @@ &snvs_rtc {
 	status = "disabled";
 };
 
+/* Header UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
 /* Console */
 &uart2 {
 	pinctrl-names = "default";
@@ -161,6 +168,13 @@ &uart2 {
 	status = "okay";
 };
 
+/* Header UART */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
 &usb3_0 {
 	status = "okay";
 };
@@ -261,6 +275,13 @@ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05				0x10
 		>;
 	};
 
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX				0x40
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX				0x40
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                            0x40
@@ -268,6 +289,13 @@ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX                            0x40
 		>;
 	};
 
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX				0x40
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX				0x40
+		>;
+	};
+
 	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14                             0x1c4
-- 
2.47.3

[PATCH v1 06/12] arm64: dts: imx8mp-var-som-symphony: enable PCIe

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the PCIe reference clock and enable the PCIe controller and PHY on
the Symphony carrier board.

Describe the reset GPIO and configure the PHY to use an external
reference clock input.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 .../dts/freescale/imx8mp-var-som-symphony.dts  | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 3dda28be92f8..fe1699649414 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -48,6 +48,12 @@ led-0 {
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "VSD_3V3";
@@ -146,6 +152,18 @@ rtc@68 {
 	};
 };
 
+&pcie {
+	reset-gpio = <&pcal6408 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
-- 
2.47.3

[PATCH v1 07/12] arm64: dts: imx8mp-var-som-symphony: add HDMI support

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable HDMI output on Symphony iMX8MP Carrier Board along with audio
support.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 .../dts/freescale/imx8mp-var-som-symphony.dts | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index fe1699649414..6878b89c4db8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -48,6 +48,18 @@ led-0 {
 		};
 	};
 
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "HDMI OUT";
+		type = "a";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	pcie0_refclk: pcie0-refclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -74,6 +86,41 @@ reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
 		states = <3300000 0x0 1800000 0x1>;
 		vin-supply = <&ldo5>;
 	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&hdmi_pai {
+	status = "okay";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
 };
 
 &i2c3 {
-- 
2.47.3

[PATCH v1 08/12] arm64: dts: imx8mp-var-som-symphony: add capacitive touchscreen

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the FT5206 capacitive touchscreen controller on the Symphony carrier
board.
Describe the interrupt pin and touchscreen geometry.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 .../dts/freescale/imx8mp-var-som-symphony.dts | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 6878b89c4db8..9622f77f8f13 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -193,6 +193,21 @@ st33ktpm2xi2c: tpm@2e {
 		reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>;
 	};
 
+	/* Capacitive touch controller */
+	ft5x06_ts: touchscreen@38 {
+		compatible = "edt,edt-ft5206";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_captouch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		wakeup-source;
+	};
+
 	rtc@68 {
 		compatible = "dallas,ds1337";
 		reg = <0x68>;
@@ -300,6 +315,12 @@ &usdhc2 {
 };
 
 &iomuxc {
+	pinctrl_captouch: captouchgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03				0x16
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL                                 0x400001c2
-- 
2.47.3

[PATCH v1 09/12] arm64: dts: imx8mp-var-som-symphony: enable ECSPI2

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable the ECSPI2 bus on the Symphony carrier board and add the pinctrl
configuration for the SPI signals and chip select GPIO.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 .../dts/freescale/imx8mp-var-som-symphony.dts    | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 9622f77f8f13..df4409af26a2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -99,6 +99,13 @@ &aud2htx {
 	status = "okay";
 };
 
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &hdmi_pai {
 	status = "okay";
 };
@@ -321,6 +328,15 @@ MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03				0x16
 		>;
 	};
 
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK				0x12
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI				0x12
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO				0x12
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13				0x12
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL                                 0x400001c2
-- 
2.47.3

[PATCH v1 10/12] arm64: dts: imx8mp-var-som-symphony: keep RGB_SEL low

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Keep the RGB_SEL line driven low on the Symphony carrier board.

This avoids leaving the line floating and ensures the board remains in
the expected display configuration.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index df4409af26a2..d796c32f50cc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -191,6 +191,14 @@ pcal6408: gpio@21 {
 		reg = <0x21>;
 		#gpio-cells = <2>;
 		gpio-controller;
+
+		/* RGB_SEL */
+		lvds-brg-enable-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "rgb_sel";
+		};
 	};
 
 	st33ktpm2xi2c: tpm@2e {
-- 
2.47.3

[PATCH v1 11/12] arm64: dts: imx8mp-var-som-symphony: enable PWM1

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable PWM1 on the Symphony carrier board and add the corresponding
pinctrl configuration.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 .../boot/dts/freescale/imx8mp-var-som-symphony.dts   | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index d796c32f50cc..06baa19d79c8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -241,6 +241,12 @@ &pcie_phy {
 	status = "okay";
 };
 
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -385,6 +391,12 @@ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05				0x10
 		>;
 	};
 
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT				0x116
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX				0x40
-- 
2.47.3

[PATCH v1 12/12] arm64: dts: freescale: imx8mp-var-som: add I2C1 bus recovery GPIOs

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the GPIO pinctrl state and GPIO descriptors required for I2C1 bus
recovery on the VAR-SOM-MX8M-PLUS.

This allows the I2C controller to recover the bus if SDA or SCL are held
low by a device.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
index 49467b48d0b0..61786eee0e82 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
@@ -180,8 +180,11 @@ led@1 {
 
 &i2c1 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic@25 {
@@ -415,6 +418,13 @@ MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA				0x400001c2
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06				0x1c2
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07				0x1c2
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04				0x1c0
-- 
2.47.3