[PATCH v2 00/12] arm64: dts: imx8mp-var-som-symphony: align DTS with hardware revision

[PATCH v2 00/12] arm64: dts: imx8mp-var-som-symphony: align DTS with hardware revision

[Stefano Radaelli]

This series updates the i.MX8MP VAR-SOM and Symphony device trees to
better align them with the current hardware configuration.

It adds the missing board peripherals and completes the related pinctrl,
GPIO and bus configuration.

v1->v2:
 - Add missing HDMI pinctrl configuration
 - Enable LCDIF3 for the HDMI display pipeline
 - Adjust PCIe controller configuration
 - Update PTN5150 interrupt trigger type

Stefano Radaelli (12):
  arm64: dts: imx8mp-var-som-symphony: add input keys
  arm64: dts: imx8mp-var-som-symphony: enable USB support
  arm64: dts: imx8mp-var-som-symphony: add TPM support
  arm64: dts: imx8mp-var-som-symphony: add external RTC
  arm64: dts: imx8mp-var-som-symphony: enable header UARTs
  arm64: dts: imx8mp-var-som-symphony: enable PCIe
  arm64: dts: imx8mp-var-som-symphony: add HDMI support
  arm64: dts: imx8mp-var-som-symphony: add capacitive touchscreen
  arm64: dts: imx8mp-var-som-symphony: enable ECSPI2
  arm64: dts: imx8mp-var-som-symphony: keep RGB_SEL low
  arm64: dts: imx8mp-var-som-symphony: enable PWM1
  arm64: dts: freescale: imx8mp-var-som: add I2C1 bus recovery GPIOs

 .../dts/freescale/imx8mp-var-som-symphony.dts | 320 +++++++++++++++++-
 .../boot/dts/freescale/imx8mp-var-som.dtsi    |  12 +-
 2 files changed, 330 insertions(+), 2 deletions(-)


base-commit: b3c1d1631f097619f8091f0293e027c4301285d6
-- 
2.47.3

[PATCH v2 01/12] arm64: dts: imx8mp-var-som-symphony: add input keys

[Stefano Radaelli]

Add the Back, Home and Menu keys connected through the GPIO expander on
the Symphony carrier board.

Also enable the SNVS power key.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - 

 .../dts/freescale/imx8mp-var-som-symphony.dts | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 291f65e36865..25f707012f62 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -13,6 +13,31 @@ chosen {
 		stdout-path = &uart2;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-back {
+			label = "Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -72,6 +97,10 @@ usb3-sata-sel-hog {
 	};
 };
 
+&snvs_pwrkey {
+	status = "okay";
+};
+
 /* Console */
 &uart2 {
 	pinctrl-names = "default";
-- 
2.47.3

[PATCH v2 02/12] arm64: dts: imx8mp-var-som-symphony: enable USB support

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable the USB controllers on the Symphony carrier board.

Add the PTN5150 Type-C controller for USB role switching, enable the USB3
PHYs and controllers, configure the I2C bus used by the Type-C
controller, and set the first USB port in OTG mode and the second port
in host mode.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - Update PTN5150 interrupt trigger type

 .../dts/freescale/imx8mp-var-som-symphony.dts | 80 ++++++++++++++++++-
 1 file changed, 79 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 25f707012f62..76928b005826 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -72,8 +72,11 @@ reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
 
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	/* GPIO expander */
@@ -95,6 +98,22 @@ usb3-sata-sel-hog {
 			line-name = "usb3_sata_sel";
 		};
 	};
+
+	/* USB Type-C Controller */
+	typec@3d {
+		compatible = "nxp,ptn5150";
+		reg = <0x3d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ptn5150>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <5 IRQ_TYPE_NONE>;
+
+		port {
+			typec_dr_sw: endpoint {
+				remote-endpoint = <&usb3_drd_sw>;
+			};
+		};
+	};
 };
 
 &snvs_pwrkey {
@@ -108,6 +127,52 @@ &uart2 {
 	status = "okay";
 };
 
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	srp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy0 {
+	fsl,phy-comp-dis-tune-percent = <115>;
+	fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <33>;
+	fsl,phy-pcs-tx-swing-full-percent = <100>;
+	fsl,phy-tx-preemp-amp-tune-microamp = <1800>;
+	fsl,phy-tx-vboost-level-microvolt = <1156>;
+	fsl,phy-tx-vref-tune-percent = <122>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1800>;
+	fsl,phy-tx-vref-tune-percent = <116>;
+	status = "okay";
+};
+
 /* SD-card */
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
@@ -129,12 +194,25 @@ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA                                 0x400001c2
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18				0x1c2
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19				0x1c2
+		>;
+	};
+
 	pinctrl_pca9534: pca9534grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15                             0xc0
 		>;
 	};
 
+	pinctrl_ptn5150: ptn5150grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05				0x10
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                            0x40
-- 
2.47.3

[PATCH v2 03/12] arm64: dts: imx8mp-var-som-symphony: add TPM support

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the ST33KTPM2XI2C TPM device on the Symphony carrier board.

Enable the I2C4 bus, add the PCAL6408 GPIO expander used by the TPM and
describe the TPM reset line.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - 

 .../dts/freescale/imx8mp-var-som-symphony.dts | 39 +++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 76928b005826..6c19a63ce405 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -116,6 +116,31 @@ typec_dr_sw: endpoint {
 	};
 };
 
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio", "sleep";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	pinctrl-2 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pcal6408: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	st33ktpm2xi2c: tpm@2e {
+		compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		label = "tpm";
+		reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -201,6 +226,20 @@ MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19				0x1c2
 		>;
 	};
 
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL					0x400001c2
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA					0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20				0x1c2
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21				0x1c2
+		>;
+	};
+
 	pinctrl_pca9534: pca9534grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15                             0xc0
-- 
2.47.3

[PATCH v2 04/12] arm64: dts: imx8mp-var-som-symphony: add external RTC

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the DS1337 RTC on the Symphony carrier board and disable the internal
SNVS RTC.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - 

 .../arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 6c19a63ce405..b15ca44b9a92 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -139,12 +139,21 @@ st33ktpm2xi2c: tpm@2e {
 		label = "tpm";
 		reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>;
 	};
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
 };
 
 &snvs_pwrkey {
 	status = "okay";
 };
 
+&snvs_rtc {
+	status = "disabled";
+};
+
 /* Console */
 &uart2 {
 	pinctrl-names = "default";
-- 
2.47.3

[PATCH v2 05/12] arm64: dts: imx8mp-var-som-symphony: enable header UARTs

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable UART1 and UART4 on the Symphony carrier board and add the
corresponding pinctrl configurations.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - 

 .../dts/freescale/imx8mp-var-som-symphony.dts | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index b15ca44b9a92..9500c9bf0f42 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -154,6 +154,13 @@ &snvs_rtc {
 	status = "disabled";
 };
 
+/* Header UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
 /* Console */
 &uart2 {
 	pinctrl-names = "default";
@@ -161,6 +168,13 @@ &uart2 {
 	status = "okay";
 };
 
+/* Header UART */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
 &usb3_0 {
 	status = "okay";
 };
@@ -261,6 +275,13 @@ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05				0x10
 		>;
 	};
 
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX				0x40
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX				0x40
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                            0x40
@@ -268,6 +289,13 @@ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX                            0x40
 		>;
 	};
 
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX				0x40
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX				0x40
+		>;
+	};
+
 	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14                             0x1c4
-- 
2.47.3

[PATCH v2 06/12] arm64: dts: imx8mp-var-som-symphony: enable PCIe

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the PCIe reference clock and enable the PCIe controller and PHY on
the Symphony carrier board.

Configure the PHY to use an external reference clock input.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - Adjust PCIe controller configuration

 .../dts/freescale/imx8mp-var-som-symphony.dts   | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 9500c9bf0f42..a928dc2d9adc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -48,6 +48,12 @@ led-0 {
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "VSD_3V3";
@@ -146,6 +152,17 @@ rtc@68 {
 	};
 };
 
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
-- 
2.47.3

[PATCH v2 07/12] arm64: dts: imx8mp-var-som-symphony: add HDMI support

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable the HDMI display pipeline and HDMI audio support on the Symphony
carrier board.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - Add missing HDMI pinctrl configuration
 - Enable LCDIF3 for the HDMI display pipeline

 .../dts/freescale/imx8mp-var-som-symphony.dts | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index a928dc2d9adc..4d8791886a78 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -48,6 +48,18 @@ led-0 {
 		};
 	};
 
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "HDMI OUT";
+		type = "a";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	pcie0_refclk: pcie0-refclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -74,6 +86,43 @@ reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
 		states = <3300000 0x0 1800000 0x1>;
 		vin-supply = <&ldo5>;
 	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&hdmi_pai {
+	status = "okay";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
 };
 
 &i2c3 {
@@ -152,6 +201,10 @@ rtc@68 {
 	};
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 &pcie {
 	status = "okay";
 };
@@ -252,6 +305,14 @@ &usdhc2 {
 };
 
 &iomuxc {
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL			0x1c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA			0x1c2
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC				0x10
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL                                 0x400001c2
-- 
2.47.3

[PATCH v2 08/12] arm64: dts: imx8mp-var-som-symphony: add capacitive touchscreen

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the FT5206 capacitive touchscreen controller on the Symphony carrier
board.
Describe the interrupt pin and touchscreen geometry.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - 

 .../dts/freescale/imx8mp-var-som-symphony.dts | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 4d8791886a78..ca0fc66193ee 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -195,6 +195,21 @@ st33ktpm2xi2c: tpm@2e {
 		reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>;
 	};
 
+	/* Capacitive touch controller */
+	ft5x06_ts: touchscreen@38 {
+		compatible = "edt,edt-ft5206";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_captouch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		wakeup-source;
+	};
+
 	rtc@68 {
 		compatible = "dallas,ds1337";
 		reg = <0x68>;
@@ -305,6 +320,12 @@ &usdhc2 {
 };
 
 &iomuxc {
+	pinctrl_captouch: captouchgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03				0x16
+		>;
+	};
+
 	pinctrl_hdmi: hdmigrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL			0x1c2
-- 
2.47.3

[PATCH v2 09/12] arm64: dts: imx8mp-var-som-symphony: enable ECSPI2

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable the ECSPI2 bus on the Symphony carrier board and add the pinctrl
configuration for the SPI signals and chip select GPIO.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - 

 .../dts/freescale/imx8mp-var-som-symphony.dts    | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index ca0fc66193ee..98aea97e9438 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -99,6 +99,13 @@ &aud2htx {
 	status = "okay";
 };
 
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &hdmi_pai {
 	status = "okay";
 };
@@ -326,6 +333,15 @@ MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03				0x16
 		>;
 	};
 
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK				0x12
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI				0x12
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO				0x12
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13				0x12
+		>;
+	};
+
 	pinctrl_hdmi: hdmigrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL			0x1c2
-- 
2.47.3

[PATCH v2 10/12] arm64: dts: imx8mp-var-som-symphony: keep RGB_SEL low

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Keep the RGB_SEL line driven low on the Symphony carrier board.

This avoids leaving the line floating and ensures the board remains in
the expected display configuration.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - 

 arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 98aea97e9438..91d24110a283 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -193,6 +193,14 @@ pcal6408: gpio@21 {
 		reg = <0x21>;
 		#gpio-cells = <2>;
 		gpio-controller;
+
+		/* RGB_SEL */
+		lvds-brg-enable-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "rgb_sel";
+		};
 	};
 
 	st33ktpm2xi2c: tpm@2e {
-- 
2.47.3

[PATCH v2 11/12] arm64: dts: imx8mp-var-som-symphony: enable PWM1

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable PWM1 on the Symphony carrier board and add the corresponding
pinctrl configuration.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - 

 .../boot/dts/freescale/imx8mp-var-som-symphony.dts   | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 91d24110a283..912d064a4ce1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -246,6 +246,12 @@ &pcie_phy {
 	status = "okay";
 };
 
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -398,6 +404,12 @@ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05				0x10
 		>;
 	};
 
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT				0x116
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX				0x40
-- 
2.47.3

[PATCH v2 12/12] arm64: dts: freescale: imx8mp-var-som: add I2C1 bus recovery GPIOs

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the GPIO pinctrl state and GPIO descriptors required for I2C1 bus
recovery on the VAR-SOM-MX8M-PLUS.

This allows the I2C controller to recover the bus if SDA or SCL are held
low by a device.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - 

 arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
index 49467b48d0b0..61786eee0e82 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
@@ -180,8 +180,11 @@ led@1 {
 
 &i2c1 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic@25 {
@@ -415,6 +418,13 @@ MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA				0x400001c2
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06				0x1c2
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07				0x1c2
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04				0x1c0
-- 
2.47.3