[PATCH v4 00/14] arm64: dts: imx8mp-var-som-symphony: align DTS with hardware revision

[PATCH v4 00/14] arm64: dts: imx8mp-var-som-symphony: align DTS with hardware revision

[Stefano Radaelli]

This series updates the i.MX8MP VAR-SOM and Symphony device trees to
better align them with the current hardware configuration.

It adds the missing board peripherals and completes the related pinctrl,
GPIO and bus configuration.

v3->v4:
 - Fixed USB irq edge type
 - Add HDMI HPD support
 - Add pcie reset-gpios instead of deprecated one
 - Fixed eth regulator

v2->v3:
 - Add FlexCAN2 controller support
 - Add FEC controller and MaxLinear MXL86110 PHY support
 - Describe PCIe PERST# reset GPIO

v1->v2:
 - Add missing HDMI pinctrl configuration
 - Enable LCDIF3 for the HDMI display pipeline
 - Adjust PCIe controller configuration
 - Update PTN5150 interrupt trigger type

Stefano Radaelli (14):
  arm64: dts: imx8mp-var-som-symphony: add input keys
  arm64: dts: imx8mp-var-som-symphony: enable USB support
  arm64: dts: imx8mp-var-som-symphony: add TPM support
  arm64: dts: imx8mp-var-som-symphony: add external RTC
  arm64: dts: imx8mp-var-som-symphony: enable header UARTs
  arm64: dts: imx8mp-var-som-symphony: enable PCIe
  arm64: dts: imx8mp-var-som-symphony: add HDMI support
  arm64: dts: imx8mp-var-som-symphony: add capacitive touchscreen
  arm64: dts: imx8mp-var-som-symphony: enable ECSPI2
  arm64: dts: imx8mp-var-som-symphony: keep RGB_SEL low
  arm64: dts: imx8mp-var-som-symphony: enable PWM1
  arm64: dts: imx8mp-var-som-symphony: enable CAN
  arm64: dts: imx8mp-var-som-symphony: add second Ethernet port
  arm64: dts: freescale: imx8mp-var-som: add I2C1 bus recovery GPIOs

 .../dts/freescale/imx8mp-var-som-symphony.dts | 397 +++++++++++++++++-
 .../boot/dts/freescale/imx8mp-var-som.dtsi    |  12 +-
 2 files changed, 407 insertions(+), 2 deletions(-)


base-commit: b3c1d1631f097619f8091f0293e027c4301285d6
-- 
2.47.3

[PATCH v4 01/14] arm64: dts: imx8mp-var-som-symphony: add input keys

[Stefano Radaelli]

Add the Back, Home and Menu keys connected through the GPIO expander on
the Symphony carrier board.

Also enable the SNVS power key.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - 

v2->v3:
 - 

v1->v2:
 - 

 .../dts/freescale/imx8mp-var-som-symphony.dts | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 291f65e36865..25f707012f62 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -13,6 +13,31 @@ chosen {
 		stdout-path = &uart2;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-back {
+			label = "Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -72,6 +97,10 @@ usb3-sata-sel-hog {
 	};
 };
 
+&snvs_pwrkey {
+	status = "okay";
+};
+
 /* Console */
 &uart2 {
 	pinctrl-names = "default";
-- 
2.47.3

[PATCH v4 02/14] arm64: dts: imx8mp-var-som-symphony: enable USB support

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable the USB controllers on the Symphony carrier board.

Add the PTN5150 Type-C controller for USB role switching, enable the USB3
PHYs and controllers, configure the I2C bus used by the Type-C
controller, and set the first USB port in OTG mode and the second port
in host mode.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - Fixed USB irq edge type

v2->v3:
 - 

v1->v2:
 - Update PTN5150 interrupt trigger type

 .../dts/freescale/imx8mp-var-som-symphony.dts | 80 ++++++++++++++++++-
 1 file changed, 79 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 25f707012f62..2b04c9027125 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -72,8 +72,11 @@ reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
 
 &i2c3 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	/* GPIO expander */
@@ -95,6 +98,22 @@ usb3-sata-sel-hog {
 			line-name = "usb3_sata_sel";
 		};
 	};
+
+	/* USB Type-C Controller */
+	typec@3d {
+		compatible = "nxp,ptn5150";
+		reg = <0x3d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ptn5150>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+		port {
+			typec_dr_sw: endpoint {
+				remote-endpoint = <&usb3_drd_sw>;
+			};
+		};
+	};
 };
 
 &snvs_pwrkey {
@@ -108,6 +127,52 @@ &uart2 {
 	status = "okay";
 };
 
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	srp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy0 {
+	fsl,phy-comp-dis-tune-percent = <115>;
+	fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <33>;
+	fsl,phy-pcs-tx-swing-full-percent = <100>;
+	fsl,phy-tx-preemp-amp-tune-microamp = <1800>;
+	fsl,phy-tx-vboost-level-microvolt = <1156>;
+	fsl,phy-tx-vref-tune-percent = <122>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1800>;
+	fsl,phy-tx-vref-tune-percent = <116>;
+	status = "okay";
+};
+
 /* SD-card */
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
@@ -129,12 +194,25 @@ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA                                 0x400001c2
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18				0x1c2
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19				0x1c2
+		>;
+	};
+
 	pinctrl_pca9534: pca9534grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15                             0xc0
 		>;
 	};
 
+	pinctrl_ptn5150: ptn5150grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05				0x10
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                            0x40
-- 
2.47.3

[PATCH v4 03/14] arm64: dts: imx8mp-var-som-symphony: add TPM support

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the ST33KTPM2XI2C TPM device on the Symphony carrier board.

Enable the I2C4 bus, add the PCAL6408 GPIO expander used by the TPM and
describe the TPM reset line.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - 

v2->v3:
 - 

v1->v2:
 - 

 .../dts/freescale/imx8mp-var-som-symphony.dts | 39 +++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 2b04c9027125..e9fcc491e5b2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -116,6 +116,31 @@ typec_dr_sw: endpoint {
 	};
 };
 
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio", "sleep";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	pinctrl-2 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pcal6408: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	st33ktpm2xi2c: tpm@2e {
+		compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		label = "tpm";
+		reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -201,6 +226,20 @@ MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19				0x1c2
 		>;
 	};
 
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL					0x400001c2
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA					0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20				0x1c2
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21				0x1c2
+		>;
+	};
+
 	pinctrl_pca9534: pca9534grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15                             0xc0
-- 
2.47.3

[PATCH v4 04/14] arm64: dts: imx8mp-var-som-symphony: add external RTC

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the DS1337 RTC on the Symphony carrier board and disable the internal
SNVS RTC.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - 

v2->v3:
 - 

v1->v2:
 - 

 .../arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index e9fcc491e5b2..7b839efdbcbc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -139,12 +139,21 @@ st33ktpm2xi2c: tpm@2e {
 		label = "tpm";
 		reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>;
 	};
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
 };
 
 &snvs_pwrkey {
 	status = "okay";
 };
 
+&snvs_rtc {
+	status = "disabled";
+};
+
 /* Console */
 &uart2 {
 	pinctrl-names = "default";
-- 
2.47.3

[PATCH v4 05/14] arm64: dts: imx8mp-var-som-symphony: enable header UARTs

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable UART1 and UART4 on the Symphony carrier board and add the
corresponding pinctrl configurations.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - 

v2->v3:
 - 

v1->v2:
 - 

 .../dts/freescale/imx8mp-var-som-symphony.dts | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 7b839efdbcbc..34a956c98635 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -154,6 +154,13 @@ &snvs_rtc {
 	status = "disabled";
 };
 
+/* Header UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
 /* Console */
 &uart2 {
 	pinctrl-names = "default";
@@ -161,6 +168,13 @@ &uart2 {
 	status = "okay";
 };
 
+/* Header UART */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
 &usb3_0 {
 	status = "okay";
 };
@@ -261,6 +275,13 @@ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05				0x10
 		>;
 	};
 
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX				0x40
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX				0x40
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                            0x40
@@ -268,6 +289,13 @@ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX                            0x40
 		>;
 	};
 
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX				0x40
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX				0x40
+		>;
+	};
+
 	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14                             0x1c4
-- 
2.47.3

[PATCH v4 06/14] arm64: dts: imx8mp-var-som-symphony: enable PCIe

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the PCIe reference clock and enable the PCIe controller and PHY on
the Symphony carrier board.

Describe the PERST# reset GPIO and configure the PHY to use an external
reference clock input.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - Add pcie reset-gpios instead of deprecated one

v2->v3:
 - 

v1->v2:
 - Adjust PCIe controller configuration

 .../dts/freescale/imx8mp-var-som-symphony.dts  | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 34a956c98635..a2becf5409cf 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -48,6 +48,12 @@ led-0 {
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "VSD_3V3";
@@ -146,6 +152,18 @@ rtc@68 {
 	};
 };
 
+&pcie {
+	reset-gpios = <&pcal6408 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
-- 
2.47.3

[PATCH v4 07/14] arm64: dts: imx8mp-var-som-symphony: add HDMI support

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable the HDMI display pipeline and HDMI audio support on the Symphony
carrier board.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - Add HDMI HPD support

v2->v3:
 - 

v1->v2:
 - Add missing HDMI pinctrl configuration
 - Enable LCDIF3 for the HDMI display pipeline

 .../dts/freescale/imx8mp-var-som-symphony.dts | 62 +++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index a2becf5409cf..f27ba602c743 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -48,6 +48,18 @@ led-0 {
 		};
 	};
 
+	native-hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "HDMI OUT";
+		type = "a";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	pcie0_refclk: pcie0-refclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -74,6 +86,43 @@ reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
 		states = <3300000 0x0 1800000 0x1>;
 		vin-supply = <&ldo5>;
 	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&hdmi_pai {
+	status = "okay";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
 };
 
 &i2c3 {
@@ -152,6 +201,10 @@ rtc@68 {
 	};
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 &pcie {
 	reset-gpios = <&pcal6408 1 GPIO_ACTIVE_LOW>;
 	status = "okay";
@@ -253,6 +306,15 @@ &usdhc2 {
 };
 
 &iomuxc {
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL			0x1c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA			0x1c2
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC				0x10
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD				0x10
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL                                 0x400001c2
-- 
2.47.3

[PATCH v4 08/14] arm64: dts: imx8mp-var-som-symphony: add capacitive touchscreen

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the FT5206 capacitive touchscreen controller on the Symphony carrier
board.
Describe the interrupt pin and touchscreen geometry.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - 

v2->v3:
 - 

v1->v2:
 - 

 .../dts/freescale/imx8mp-var-som-symphony.dts | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index f27ba602c743..bac3de6e1530 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -195,6 +195,21 @@ st33ktpm2xi2c: tpm@2e {
 		reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>;
 	};
 
+	/* Capacitive touch controller */
+	ft5x06_ts: touchscreen@38 {
+		compatible = "edt,edt-ft5206";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_captouch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		wakeup-source;
+	};
+
 	rtc@68 {
 		compatible = "dallas,ds1337";
 		reg = <0x68>;
@@ -306,6 +321,12 @@ &usdhc2 {
 };
 
 &iomuxc {
+	pinctrl_captouch: captouchgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03				0x16
+		>;
+	};
+
 	pinctrl_hdmi: hdmigrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL			0x1c2
-- 
2.47.3

[PATCH v4 09/14] arm64: dts: imx8mp-var-som-symphony: enable ECSPI2

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable the ECSPI2 bus on the Symphony carrier board and add the pinctrl
configuration for the SPI signals and chip select GPIO.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - 

v2->v3:
 - 

v1->v2:
 - 

 .../dts/freescale/imx8mp-var-som-symphony.dts    | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index bac3de6e1530..c7073fcb679e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -99,6 +99,13 @@ &aud2htx {
 	status = "okay";
 };
 
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &hdmi_pai {
 	status = "okay";
 };
@@ -327,6 +334,15 @@ MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03				0x16
 		>;
 	};
 
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK				0x12
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI				0x12
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO				0x12
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13				0x12
+		>;
+	};
+
 	pinctrl_hdmi: hdmigrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL			0x1c2
-- 
2.47.3

[PATCH v4 10/14] arm64: dts: imx8mp-var-som-symphony: keep RGB_SEL low

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Keep the RGB_SEL line driven low on the Symphony carrier board.

This avoids leaving the line floating and ensures the board remains in
the expected display configuration.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - 

v2->v3:
 - 

v1->v2:
 - 

 arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index c7073fcb679e..4f1d61c55ffb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -193,6 +193,14 @@ pcal6408: gpio@21 {
 		reg = <0x21>;
 		#gpio-cells = <2>;
 		gpio-controller;
+
+		/* RGB_SEL */
+		lvds-brg-enable-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "rgb_sel";
+		};
 	};
 
 	st33ktpm2xi2c: tpm@2e {
-- 
2.47.3

[PATCH v4 11/14] arm64: dts: imx8mp-var-som-symphony: enable PWM1

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable PWM1 on the Symphony carrier board and add the corresponding
pinctrl configuration.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - 

v2->v3:
 - 

v1->v2:
 - 

 .../boot/dts/freescale/imx8mp-var-som-symphony.dts   | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 4f1d61c55ffb..e1b78ed167b4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -247,6 +247,12 @@ &pcie_phy {
 	status = "okay";
 };
 
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -400,6 +406,12 @@ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05				0x10
 		>;
 	};
 
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT				0x116
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX				0x40
-- 
2.47.3

[PATCH v4 12/14] arm64: dts: imx8mp-var-som-symphony: enable CAN

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Enable the FlexCAN2 controller on the Symphony carrier board and add the
corresponding pinctrl configuration.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - 

v2->v3:
 - Add FlexCAN2 controller support

v1->v2:
 - 

 .../boot/dts/freescale/imx8mp-var-som-symphony.dts  | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index e1b78ed167b4..7ad57caa0f1c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -106,6 +106,12 @@ &ecspi2 {
 	status = "okay";
 };
 
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
 &hdmi_pai {
 	status = "okay";
 };
@@ -357,6 +363,13 @@ MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13				0x12
 		>;
 	};
 
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__CAN2_TX					0x154
+			MX8MP_IOMUXC_UART3_TXD__CAN2_RX					0x154
+		>;
+	};
+
 	pinctrl_hdmi: hdmigrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL			0x1c2
-- 
2.47.3

[PATCH v4 13/14] arm64: dts: imx8mp-var-som-symphony: add second Ethernet port

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add support for the second Ethernet interface available on the Symphony
carrier board.

Enable the FEC controller, add the MaxLinear MXL86110 Gigabit Ethernet
PHY on the MDIO bus, describe its reset and power configuration, and add
the required RGMII pinctrl settings.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - Fixed eth regulator

v2->v3:
 - Add FEC controller and MaxLinear MXL86110 PHY support

 .../dts/freescale/imx8mp-var-som-symphony.dts | 62 +++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index 7ad57caa0f1c..c5a38018d494 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -66,6 +66,24 @@ pcie0_refclk: pcie0-refclk {
 		clock-frequency = <100000000>;
 	};
 
+	reg_fec_phy: regulator-fec-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_phy_vddio: regulator-phy-vddio {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "VSD_3V3";
@@ -106,6 +124,33 @@ &ecspi2 {
 	status = "okay";
 };
 
+&eqos {
+	mdio {
+		ethphy1: ethernet-phy@5 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <5>;
+			reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <20000>;
+			vddio-supply = <&reg_phy_vddio>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	/*
+	 * The required RGMII TX and RX 2ns delays are implemented directly
+	 * in hardware via passive delay elements on the SOM PCB.
+	 * No delay configuration is needed in software via PHY driver.
+	 */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec_phy>;
+	status = "okay";
+};
+
 &flexcan2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan2>;
@@ -363,6 +408,23 @@ MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13				0x12
 		>;
 	};
 
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0				0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1				0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2				0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3				0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC				0x90
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL			0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0				0x00
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1				0x00
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2				0x00
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3				0x00
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL			0x00
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC				0x00
+		>;
+	};
+
 	pinctrl_flexcan2: flexcan2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART3_RXD__CAN2_TX					0x154
-- 
2.47.3

[PATCH v4 14/14] arm64: dts: freescale: imx8mp-var-som: add I2C1 bus recovery GPIOs

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the GPIO pinctrl state and GPIO descriptors required for I2C1 bus
recovery on the VAR-SOM-MX8M-PLUS.

This allows the I2C controller to recover the bus if SDA or SCL are held
low by a device.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - 

v2->v3:
 - 

 arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
index 49467b48d0b0..61786eee0e82 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
@@ -180,8 +180,11 @@ led@1 {
 
 &i2c1 {
 	clock-frequency = <400000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	pmic@25 {
@@ -415,6 +418,13 @@ MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA				0x400001c2
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06				0x1c2
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07				0x1c2
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04				0x1c0
-- 
2.47.3