[PATCH v2 0/4] arm64: dts: am62p5-var-som-symphony: align DTS with hardware revision

[PATCH v2 0/4] arm64: dts: am62p5-var-som-symphony: align DTS with hardware revision

[Stefano Radaelli]

This series updates the device tree description for the Variscite
VAR-SOM-AM62P and Symphony carrier board to better reflect the current
board configuration.

It aligns the Ethernet PHY description, updates the audio codec
configuration, and adds the touchscreen and TPM devices together with
their required board-level resources.

v1->v2:
 - Remove unused eth property
 - Remove wrong dmic property
 - Fix commit message

Stefano Radaelli (4):
  arm64: dts: ti: var-som-am62p: fix Ethernet PHY configuration
  arm64: dts: ti: var-som-am62p: update audio codec configuration
  arm64: dts: am62p5-var-som-symphony: add touchscreen support
  arm64: dts: am62p5-var-som-symphony: add TPM support

 .../dts/ti/k3-am62p5-var-som-symphony.dts     | 43 +++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi | 35 +++++++++++++--
 2 files changed, 74 insertions(+), 4 deletions(-)


base-commit: 3d5670d672ae08b8c534b7beed6f57c8b44e7b43
-- 
2.47.3

[PATCH v2 1/4] arm64: dts: ti: var-som-am62p: fix Ethernet PHY configuration

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Fix the Ethernet device tree description on the VAR-SOM-AM62P.

Enable the CPSW Ethernet controller and correct the Ethernet PHY
description by modelling the PHY power supply and adding the required
board-specific PHY properties.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - Remove unused eth property

 arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
index fc5a3942cde0..ca2483a04b9d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
@@ -113,6 +113,15 @@ reg_3v3_phy: regulator-3v3-phy {
 		regulator-always-on;
 	};
 
+	reg_eth_phy_vdd: regulator-eth-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_eth_phy_vdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&main_gpio0 46 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,bitclock-master = <&codec_dai>;
@@ -149,6 +158,7 @@ &audio_refclk1 {
 &cpsw3g {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii1>;
+	status = "okay";
 };
 
 &cpsw3g_mdio {
@@ -159,9 +169,9 @@ &cpsw3g_mdio {
 	cpsw3g_phy0: ethernet-phy@4 {
 		compatible = "ethernet-phy-id0283.bc30";
 		reg = <4>;
-		reset-gpios = <&main_gpio0 46 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <10000>;
-		reset-deassert-us = <100000>;
+		bootph-all;
+		enet-phy-lane-no-swap;
+		vdd-supply = <&reg_eth_phy_vdd>;
 	};
 };
 
-- 
2.47.3

[PATCH v2 2/4] arm64: dts: ti: var-som-am62p: update audio codec configuration

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Update the WM8904 audio codec configuration on the VAR-SOM-AM62P.

Set the audio reference clock rate to 12 MHz and add the codec DRC, GPIO
and DMIC configuration required by the board.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - Remove wrong dmic property

 arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
index ca2483a04b9d..8a8dec80cb30 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
@@ -152,7 +152,7 @@ simple-audio-card,cpu {
 };
 
 &audio_refclk1 {
-	assigned-clock-rates = <100000000>;
+	assigned-clock-rates = <12000000>;
 };
 
 &cpsw3g {
@@ -203,6 +203,23 @@ wm8904: audio-codec@1a {
 		DBVDD-supply = <&reg_3v3>;
 		DCVDD-supply = <&reg_1v8>;
 		MICVDD-supply = <&reg_1v8>;
+		wlf,drc-cfg-names = "default", "peaklimiter", "tradition",
+				    "soft", "music";
+		/*
+		 * Config registers per name, respectively:
+		 * KNEE_IP = 0,   KNEE_OP = 0,     HI_COMP = 1,   LO_COMP = 1
+		 * KNEE_IP = -24, KNEE_OP = -6,    HI_COMP = 1/4, LO_COMP = 1
+		 * KNEE_IP = -42, KNEE_OP = -3,    HI_COMP = 0,   LO_COMP = 1
+		 * KNEE_IP = -45, KNEE_OP = -9,    HI_COMP = 1/8, LO_COMP = 1
+		 * KNEE_IP = -30, KNEE_OP = -10.5, HI_COMP = 1/4, LO_COMP = 1
+		 */
+		wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>,
+				   /bits/ 16 <0x04af 0x324b 0x0010 0x0408>,
+				   /bits/ 16 <0x04af 0x324b 0x0028 0x0704>,
+				   /bits/ 16 <0x04af 0x324b 0x0018 0x078c>,
+				   /bits/ 16 <0x04af 0x324b 0x0010 0x050e>;
+		/* GPIO1 = DMIC_CLK, don't touch others */
+		wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>;
 	};
 };
 
-- 
2.47.3

[PATCH v2 3/4] arm64: dts: am62p5-var-som-symphony: add touchscreen support

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add support for the capacitive touchscreen on the Symphony carrier
board.

Describe the FT5x06 touchscreen controller, configure its interrupt,
and mark it as a wakeup source.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - Fix commit message

 .../dts/ti/k3-am62p5-var-som-symphony.dts     | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts b/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
index 5ba4ed56755b..5c41647ff43f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
@@ -293,6 +293,21 @@ &main_i2c1 {
 	clock-frequency = <400000>;
 	status = "okay";
 
+	/* Capacitive touch controller */
+	ft5x06_ts: touchscreen@38 {
+		compatible = "edt,edt-ft5206";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_captouch_pins>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		wakeup-source;
+	};
+
 	rtc@68 {
 		compatible = "dallas,ds1337";
 		reg = <0x68>;
@@ -307,6 +322,12 @@ &main_mcan0 {
 };
 
 &main_pmx0 {
+	pinctrl_captouch_pins: main-captouch-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01b8, PIN_INPUT, 7) /* (E20) SPI0_CS1.GPIO1_16 */
+		>;
+	};
+
 	pinctrl_extcon: main-extcon-pins {
 		pinctrl-single,pins = <
 			AM62PX_IOPAD(0x01a8, PIN_INPUT, 7) /* (F25) MCASP0_AFSX.GPIO1_12 */
-- 
2.47.3

[PATCH v2 4/4] arm64: dts: am62p5-var-som-symphony: add TPM support

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add the ST33KTPM2XI2C TPM device on the Symphony carrier board.

The TPM reset signal is driven through a PCAL6408 GPIO expander, so add
the corresponding GPIO expander node. Configure the RGB_SEL board signal
through a GPIO hog to keep the board in the expected configuration.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
 - 

 .../dts/ti/k3-am62p5-var-som-symphony.dts     | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts b/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
index 5c41647ff43f..8fe8ec903d3d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
@@ -293,6 +293,28 @@ &main_i2c1 {
 	clock-frequency = <400000>;
 	status = "okay";
 
+	pcal6408: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		/* RGB_SEL */
+		lvds-brg-enable-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "lvds_brg_en";
+		};
+	};
+
+	st33ktpm2xi2c: tpm@2e {
+		compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c";
+		label = "tpm";
+		reg = <0x2e>;
+		reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>;
+	};
+
 	/* Capacitive touch controller */
 	ft5x06_ts: touchscreen@38 {
 		compatible = "edt,edt-ft5206";
-- 
2.47.3