[PATCH v2 0/8] ARM: dts: aspeed: Move flash nodes out of aspeed-g6.dtsi

[PATCH v2 0/8] ARM: dts: aspeed: Move flash nodes out of aspeed-g6.dtsi

[Jacky Huang]

Move SPI NOR flash descriptions out of aspeed-g6.dtsi. The disabled
flash@* stubs there describe board population, not SoC IP.

Patches #1..#7 make each board or vendor common DTSI declare the
flashes it uses, and keep status = "okay" so intermediate commits stay
bisect-safe while the stubs still exist. Patch #8 removes the stubs.

Changes in v2:
Add Ventura2's four flash declarations to the Facebook patch.

Link to v1:
https://lore.kernel.org/all/20260813102233.3088939-1-jackyhuang@nvidia.com/


Jacky Huang (8):
  ARM: dts: aspeed: facebook: Declare SPI NOR flashes on boards
  ARM: dts: aspeed: ibm: Declare SPI NOR flashes on boards
  ARM: dts: aspeed: nvidia: Declare SPI NOR flashes on boards
  ARM: dts: aspeed: ampere: Declare SPI NOR flashes on boards
  ARM: dts: aspeed: asus: Declare SPI NOR flashes on boards
  ARM: dts: aspeed: inventec: Declare SPI NOR flashes on boards
  ARM: dts: aspeed: Declare SPI NOR flashes on remaining boards
  ARM: dts: aspeed: g6: Remove board-level flash stubs

 .../boot/dts/aspeed/aspeed-ast2600-evb.dts    |  4 ++
 .../aspeed/aspeed-bmc-ampere-mtjefferson.dts  |  9 +++
 .../aspeed/aspeed-bmc-ampere-mtmitchell.dts   |  9 +++
 .../aspeed-bmc-asus-kommando-ipmi-card.dts    |  3 +
 .../boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts  |  6 ++
 .../aspeed/aspeed-bmc-facebook-anacapa.dts    |  7 +++
 .../aspeed/aspeed-bmc-facebook-bletchley.dts  |  9 +++
 .../aspeed/aspeed-bmc-facebook-catalina.dts   |  6 ++
 .../aspeed/aspeed-bmc-facebook-clemente.dts   |  6 ++
 .../aspeed/aspeed-bmc-facebook-greatlakes.dts |  4 ++
 .../dts/aspeed/aspeed-bmc-facebook-harma.dts  |  8 +++
 .../aspeed/aspeed-bmc-facebook-minerva.dts    |  6 ++
 .../aspeed/aspeed-bmc-facebook-rainiera6.dts  |  8 +++
 .../aspeed/aspeed-bmc-facebook-sanmiguel.dts  |  6 ++
 .../aspeed-bmc-facebook-santabarbara.dts      |  8 +++
 .../aspeed/aspeed-bmc-facebook-ventura2.dts   | 10 ++++
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  |  4 ++
 .../aspeed/aspeed-bmc-facebook-yosemite5.dts  |  8 +++
 .../boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts   |  6 ++
 .../aspeed/aspeed-bmc-inventec-starscream.dts |  6 ++
 .../aspeed-bmc-inventec-transformers.dts      |  6 ++
 .../aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts |  5 ++
 .../dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts |  5 ++
 .../boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts |  9 +++
 .../dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts  |  9 +++
 .../boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts |  6 ++
 .../aspeed/aspeed-bmc-ufispace-ncplite.dts    |  6 ++
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi       | 56 -------------------
 .../ast2600-facebook-netbmc-common.dtsi       |  8 +++
 29 files changed, 187 insertions(+), 56 deletions(-)


base-commit: ba3f2c447203166c640e40dc8e9b4b91fc613aa5
-- 
2.43.0

[PATCH v2 1/8] ARM: dts: aspeed: facebook: Declare SPI NOR flashes on boards

[Jacky Huang]

Declare jedec,spi-nor flash nodes with the properties previously
inherited from aspeed-g6.dtsi stubs. Keep status = "okay" so these
boards stay enabled while the SoC stubs still exist.

Signed-off-by: Jacky Huang <jackyhuang@nvidia.com>
---
Changes in v2:
  Add the missing compatible and reg properties for Ventura2's four
  flash nodes, plus spi-rx-bus-width for its two FMC flashes.

 .../boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts    |  7 +++++++
 .../boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts  |  9 +++++++++
 .../boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts   |  6 ++++++
 .../boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts   |  6 ++++++
 .../boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts |  4 ++++
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts |  8 ++++++++
 .../boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts    |  6 ++++++
 .../boot/dts/aspeed/aspeed-bmc-facebook-rainiera6.dts  |  8 ++++++++
 .../boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts  |  6 ++++++
 .../dts/aspeed/aspeed-bmc-facebook-santabarbara.dts    |  8 ++++++++
 .../boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts   | 10 ++++++++++
 .../boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts  |  4 ++++
 .../boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts  |  8 ++++++++
 .../dts/aspeed/ast2600-facebook-netbmc-common.dtsi     |  8 ++++++++
 14 files changed, 98 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
index 1fddf3a5d..e3b0e21e8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
@@ -166,18 +166,24 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-128.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
@@ -1023,6 +1029,7 @@ &spi2 {
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		label = "pnor";
 		spi-max-frequency = <12000000>;
 		spi-tx-bus-width = <2>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
index d1a04b63d..409757a10 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -314,17 +314,23 @@ fixed-link {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-128.dtsi"
 	};
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
@@ -334,10 +340,13 @@ &spi2 {
 	pinctrl-0 = <&pinctrl_spi2_default>;
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "pnor";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index 14dd0ab64..c6b9c67bd 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -170,17 +170,23 @@ &mac3 {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-128.dtsi"
 	};
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
index 820d39a92..82e5d7b9a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
@@ -189,18 +189,24 @@ &ehci0 {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-128.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
index 49914a4a1..a7df5e7ed 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
@@ -82,6 +82,8 @@ &rtc {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
@@ -90,6 +92,8 @@ flash@0 {
 #include "openbmc-flash-layout-64.dtsi"
 	};
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc2";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index 5602a502d..e35041946 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -139,18 +139,24 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-128.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
@@ -161,6 +167,8 @@ &spi2 {
 	pinctrl-0 = <&pinctrl_spi2_default>;
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "pnor";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
index eb8d4b955..3bf894569 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -161,17 +161,23 @@ &mdio3 {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-128.dtsi"
 	};
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-rainiera6.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-rainiera6.dts
index b29e08cea..cb41b7853 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-rainiera6.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-rainiera6.dts
@@ -128,18 +128,24 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-128.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
@@ -969,6 +975,8 @@ &spi2 {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		m25p,fast-read;
 		label = "pnor";
 		spi-max-frequency = <12000000>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts
index 3cc6e772c..73d013cf3 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-sanmiguel.dts
@@ -117,20 +117,26 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
 		m25p,fast-read;
 
 		status = "okay";
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-128.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
 		m25p,fast-read;
 
 		status = "okay";
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-128-alt.dtsi"
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
index 0a3e2e241..efe1a2ea5 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
@@ -173,18 +173,24 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-128.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
@@ -1867,6 +1873,8 @@ &spi2 {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		m25p,fast-read;
 		label = "pnor";
 		spi-max-frequency = <12000000>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts
index f3dbdece3..0fbae54e4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura2.dts
@@ -301,20 +301,26 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
 		m25p,fast-read;
 
 		status = "okay";
+		spi-rx-bus-width = <2>;
 		#include "openbmc-flash-layout-128.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
 		m25p,fast-read;
 
 		status = "okay";
+		spi-rx-bus-width = <2>;
 		#include "openbmc-flash-layout-128-alt.dtsi"
 	};
 };
@@ -2851,6 +2857,8 @@ &spi2 {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		label = "pnor";
 		spi-max-frequency = <12000000>;
 		spi-rx-bus-width = <2>;
@@ -2861,6 +2869,8 @@ flash@0 {
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		label = "e810";
 		spi-max-frequency = <12000000>;
 		spi-rx-bus-width = <2>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index e4172be84..bfc7df61b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -162,6 +162,8 @@ &mac3 {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
@@ -171,6 +173,8 @@ flash@0 {
 #include "openbmc-flash-layout-128.dtsi"
 	};
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
index 6287f80d7..e2d4aafb6 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
@@ -128,18 +128,24 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-128.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
@@ -1028,6 +1034,8 @@ &spi2 {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		m25p,fast-read;
 		label = "pnor";
 		spi-max-frequency = <12000000>;
diff --git a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
index 0ef225acd..180015ccb 100644
--- a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -51,17 +51,25 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "spi0.0";
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 
 #include "facebook-bmc-flash-layout-128.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "spi0.1";
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 
 		partitions {
 			compatible = "fixed-partitions";
-- 
2.43.0

[PATCH v2 2/8] ARM: dts: aspeed: ibm: Declare SPI NOR flashes on boards

[Jacky Huang]

Declare jedec,spi-nor flash nodes with the properties previously
inherited from aspeed-g6.dtsi stubs. Keep status = "okay" so these
boards stay enabled while the SoC stubs still exist.

Signed-off-by: Jacky Huang <jackyhuang@nvidia.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts   | 6 ++++++
 arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 9 +++++++++
 2 files changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
index dbadba8eb..df45f6192 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
@@ -1551,20 +1551,26 @@ &lpc_snoop {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
 #include "openbmc-flash-layout-64-alt.dtsi"
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index 6fe702359..d886f2478 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -140,18 +140,24 @@ &gpio0 {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-128.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
@@ -161,10 +167,13 @@ &spi1 {
 	pinctrl-0 = <&pinctrl_spi1_default>;
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "pnor";
 		spi-max-frequency = <100000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
-- 
2.43.0

[PATCH v2 3/8] ARM: dts: aspeed: nvidia: Declare SPI NOR flashes on boards

[Jacky Huang]

Declare jedec,spi-nor flash nodes with the properties previously
inherited from aspeed-g6.dtsi stubs. Keep status = "okay" so these
boards stay enabled while the SoC stubs still exist.

Signed-off-by: Jacky Huang <jackyhuang@nvidia.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts | 5 +++++
 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts     | 5 +++++
 2 files changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
index 4de38613b..c8788c67d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
@@ -145,8 +145,10 @@ &fmc {
 	flash@0 {
 		status = "okay";
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
@@ -180,9 +182,12 @@ &spi2 {
 
 	// Data SPI is 64MB in size
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		label = "config";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts
index 29f56176e..022876472 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts
@@ -56,17 +56,22 @@ &fmc {
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		label = "bmc";
 		status = "okay";
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 		#include "openbmc-flash-layout-128.dtsi"
 	};
 
 	flash@1 {
 		compatible = "jedec,spi-nor";
+		reg = <1>;
 		label = "alt-bmc";
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <1>;
 		status = "okay";
+		spi-max-frequency = <50000000>;
 		#include "openbmc-flash-layout-128-alt.dtsi"
 	};
 };
-- 
2.43.0

[PATCH v2 4/8] ARM: dts: aspeed: ampere: Declare SPI NOR flashes on boards

[Jacky Huang]

Declare jedec,spi-nor flash nodes with the properties previously
inherited from aspeed-g6.dtsi stubs. Keep status = "okay" so these
boards stay enabled while the SoC stubs still exist.

Signed-off-by: Jacky Huang <jackyhuang@nvidia.com>
---
 .../boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts    | 9 +++++++++
 .../arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts | 9 +++++++++
 2 files changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
index 53b4372f1..44332d1ba 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
@@ -149,18 +149,24 @@ &mac3 {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64-alt.dtsi"
 	};
 };
@@ -171,10 +177,13 @@ &spi1 {
 	pinctrl-0 = <&pinctrl_spi1_default>;
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "pnor";
 		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
index 2b336aa01..cd7cd012d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
@@ -379,18 +379,24 @@ &mac3 {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64-alt.dtsi"
 	};
 };
@@ -401,10 +407,13 @@ &spi1 {
 	pinctrl-0 = <&pinctrl_spi1_default>;
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "pnor";
 		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
-- 
2.43.0

[PATCH v2 5/8] ARM: dts: aspeed: asus: Declare SPI NOR flashes on boards

[Jacky Huang]

Declare jedec,spi-nor flash nodes with the properties previously
inherited from aspeed-g6.dtsi stubs. Keep status = "okay" so these
boards stay enabled while the SoC stubs still exist.

Signed-off-by: Jacky Huang <jackyhuang@nvidia.com>
---
 .../boot/dts/aspeed/aspeed-bmc-asus-kommando-ipmi-card.dts  | 3 +++
 arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts           | 6 ++++++
 2 files changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-kommando-ipmi-card.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-kommando-ipmi-card.dts
index e0f7d92ef..8e45e3928 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-kommando-ipmi-card.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-kommando-ipmi-card.dts
@@ -60,10 +60,13 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
index 64f4ed07c..e024391a0 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
@@ -120,10 +120,13 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
 };
@@ -134,9 +137,12 @@ &spi1 {
 	pinctrl-0 = <&pinctrl_spi1_default>;
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		label = "bios";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
-- 
2.43.0

[PATCH v2 6/8] ARM: dts: aspeed: inventec: Declare SPI NOR flashes on boards

[Jacky Huang]

Declare jedec,spi-nor flash nodes with the properties previously
inherited from aspeed-g6.dtsi stubs. Keep status = "okay" so these
boards stay enabled while the SoC stubs still exist.

Signed-off-by: Jacky Huang <jackyhuang@nvidia.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts | 6 ++++++
 .../boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts    | 6 ++++++
 2 files changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts
index ec82af94e..0bb3c6ab7 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts
@@ -81,6 +81,8 @@ &mac3 {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
@@ -91,6 +93,8 @@ flash@0 {
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc2";
@@ -106,6 +110,8 @@ &spi1 {
 	pinctrl-0 = <&pinctrl_spi1_default>;
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bios";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
index 45ee0f2cc..35f28799f 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
@@ -64,6 +64,8 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
@@ -74,6 +76,8 @@ flash@0 {
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc2";
@@ -89,6 +93,8 @@ &spi1 {
 	pinctrl-0 = <&pinctrl_spi1_default>;
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bios";
-- 
2.43.0

[PATCH v2 7/8] ARM: dts: aspeed: Declare SPI NOR flashes on remaining boards

[Jacky Huang]

Declare jedec,spi-nor flash nodes on the AST2600 EVB, Qualcomm
DC-SCM, Quanta S6Q, and UfiSpace NCPlite boards with the properties
previously inherited from aspeed-g6.dtsi stubs. Keep status = "okay"
so these boards stay enabled while the SoC stubs still exist.

Signed-off-by: Jacky Huang <jackyhuang@nvidia.com>
---
 arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts          | 4 ++++
 arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts   | 9 +++++++++
 arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts       | 6 ++++++
 arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts | 6 ++++++
 4 files changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
index 3f2ca9da0..38f8d7c03 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
@@ -179,6 +179,8 @@ &rtc {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
@@ -194,6 +196,8 @@ &spi1 {
 	pinctrl-0 = <&pinctrl_spi1_default>;
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "pnor";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
index 259ef3f54..882b68248 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
@@ -61,18 +61,24 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <133000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <133000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64-alt.dtsi"
 	};
 };
@@ -83,10 +89,13 @@ &spi1 {
 	pinctrl-0 = <&pinctrl_spi1_default>;
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bios";
 		spi-max-frequency = <133000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
index 864512278..70791b3c0 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
@@ -196,10 +196,13 @@ &fmc {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
 };
@@ -211,10 +214,13 @@ &spi2 {
 	status = "okay";
 
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "spi2:0";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
index 7ab29129d..d8f7939ab 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
@@ -148,18 +148,24 @@ &mac2 {
 &fmc {
 	status = "okay";
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
 
 	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
 		status = "okay";
 		m25p,fast-read;
 		label = "alt-bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 #include "openbmc-flash-layout-64-alt.dtsi"
 	};
 };
-- 
2.43.0

[PATCH v2 8/8] ARM: dts: aspeed: g6: Remove board-level flash stubs

[Jacky Huang]

SPI NOR flashes describe board population, not SoC IP. With boards
now declaring the flashes they use, drop the disabled flash@*
stubs from aspeed-g6.dtsi and leave only the FMC/SPI controllers.

Signed-off-by: Jacky Huang <jackyhuang@nvidia.com>
---
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 56 -------------------------
 1 file changed, 56 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index edf4b74f5..de705c544 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -119,27 +119,6 @@ fmc: spi@1e620000 {
 			clocks = <&syscon ASPEED_CLK_AHB>;
 			status = "disabled";
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-			flash@1 {
-				reg = < 1 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-			flash@2 {
-				reg = < 2 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
 		};
 
 		spi1: spi@1e630000 {
@@ -149,20 +128,6 @@ spi1: spi@1e630000 {
 			compatible = "aspeed,ast2600-spi";
 			clocks = <&syscon ASPEED_CLK_AHB>;
 			status = "disabled";
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-			flash@1 {
-				reg = < 1 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
 		};
 
 		spi2: spi@1e631000 {
@@ -172,27 +137,6 @@ spi2: spi@1e631000 {
 			compatible = "aspeed,ast2600-spi";
 			clocks = <&syscon ASPEED_CLK_AHB>;
 			status = "disabled";
-			flash@0 {
-				reg = < 0 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-			flash@1 {
-				reg = < 1 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
-			flash@2 {
-				reg = < 2 >;
-				compatible = "jedec,spi-nor";
-				spi-max-frequency = <50000000>;
-				spi-rx-bus-width = <2>;
-				status = "disabled";
-			};
 		};
 
 		mdio0: mdio@1e650000 {
-- 
2.43.0