[PATCH v2 0/2] Add NXP FRDM-IMX95-PRO board support

public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed

* [PATCH v2 0/2] Add NXP FRDM-IMX95-PRO board support
@ 2026-04-28  8:03 Joseph Guo
  2026-04-28  8:03 ` [PATCH v2 1/2] dt-bindings: arm: fsl: Add i.MX95 19x19 FRDM PRO board Joseph Guo
  2026-04-28  8:03 ` [PATCH v2 2/2] arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts Joseph Guo
  0 siblings, 2 replies; 10+ messages in thread
From: Joseph Guo @ 2026-04-28  8:03 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
  Cc: devicetree, linux-kernel, imx, linux-arm-kernel, xinyu.chen,
	qijian.guo, justin.jiang, Joseph Guo, Daniel Baluta, Conor Dooley

This patchset add Devicetree support for NXP FRDM-IMX95-PRO
development board based on i.MX95 19x19 SoC.

Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
---
Changes in v2:
- Run dt-format to reformat the node order
- Change compatible of mqs to audio-graph-card2
- Add imx95-19x19-frdm-pro in Makefile
- Link to v1: https://lore.kernel.org/r/20260318-imx95_frdm_pro-v1-0-8c00e59f0b1b@nxp.com

---
Joseph Guo (2):
      dt-bindings: arm: fsl: Add i.MX95 19x19 FRDM PRO board
      arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts

 Documentation/devicetree/bindings/arm/fsl.yaml     |    1 +
 arch/arm64/boot/dts/freescale/Makefile             |    1 +
 .../boot/dts/freescale/imx95-19x19-frdm-pro.dts    | 1049 ++++++++++++++++++++
 3 files changed, 1051 insertions(+)
---
base-commit: 7109a2155340cc7b21f27e832ece6df03592f2e8
change-id: 20260311-imx95_frdm_pro-7a8d03b50982

Best regards,
-- 
Joseph Guo <qijian.guo@nxp.com>



^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 1/2] dt-bindings: arm: fsl: Add i.MX95 19x19 FRDM PRO board
  2026-04-28  8:03 [PATCH v2 0/2] Add NXP FRDM-IMX95-PRO board support Joseph Guo
@ 2026-04-28  8:03 ` Joseph Guo
  2026-04-28  8:03 ` [PATCH v2 2/2] arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts Joseph Guo
  1 sibling, 0 replies; 10+ messages in thread
From: Joseph Guo @ 2026-04-28  8:03 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
  Cc: devicetree, linux-kernel, imx, linux-arm-kernel, xinyu.chen,
	qijian.guo, justin.jiang, Joseph Guo, Daniel Baluta, Conor Dooley

Add the i.MX95 19x19 FRDM PRO board in the binding document.

Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index f5d3c08369b92987b2cb01e36c26f9f72937f557..9f50b4bf67bc2c0b0e11b1ae615151aa4d5f0d09 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1485,6 +1485,7 @@ properties:
               - fsl,imx95-15x15-evk       # i.MX95 15x15 EVK Board
               - fsl,imx95-15x15-frdm      # i.MX95 15x15 FRDM Board
               - fsl,imx95-19x19-evk       # i.MX95 19x19 EVK Board
+              - fsl,imx95-19x19-frdm-pro  # i.MX95 19x19 FRDM PRO Board
               - toradex,verdin-imx95-19x19-evk  # i.MX95 Verdin Evaluation Kit (EVK)
           - const: fsl,imx95
 

-- 
2.34.1



^ permalink raw reply related	[flat|nested] 10+ messages in thread

* [PATCH v2 2/2] arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts
  2026-04-28  8:03 [PATCH v2 0/2] Add NXP FRDM-IMX95-PRO board support Joseph Guo
  2026-04-28  8:03 ` [PATCH v2 1/2] dt-bindings: arm: fsl: Add i.MX95 19x19 FRDM PRO board Joseph Guo
@ 2026-04-28  8:03 ` Joseph Guo
  2026-04-29  1:37   ` Fabio Estevam
  2026-04-29  9:26   ` Daniel Baluta
  1 sibling, 2 replies; 10+ messages in thread
From: Joseph Guo @ 2026-04-28  8:03 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
  Cc: devicetree, linux-kernel, imx, linux-arm-kernel, xinyu.chen,
	qijian.guo, justin.jiang, Joseph Guo

NXP i.MX95 19x19 FRDM PRO is cost-effective with extensive
expansion capabilities based on the i.MX95 19x19 SoC.

Add device tree for this board. Including:
- LPUART1 and LPUART5
- NETC
- USB
- 2 M-Key M.2 PCIe
- uSDHC1, uSDHC2 and uSDHC3
- FlexCAN1 and FlexCAN3
- LPI2C3, LPI2C4 and their child nodes
- Watchdog3
- SAI, MQS, MICFIL

Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
---
Changes in v2:
- Run dt-format to reformat the node order
- Change compatible of mqs to audio-graph-card2
- Add imx95-19x19-frdm-pro in Makefile
---
 arch/arm64/boot/dts/freescale/Makefile             |    1 +
 .../boot/dts/freescale/imx95-19x19-frdm-pro.dts    | 1049 ++++++++++++++++++++
 2 files changed, 1050 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index a6fe56bb93aa12040d184aa576623951515a8469..af22a5aa3e96fa24ebf2766a98fea4d0948c50f4 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -462,6 +462,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-frdm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-frdm-pro.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb
 
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-frdm-pro.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-frdm-pro.dts
new file mode 100644
index 0000000000000000000000000000000000000000..eafd00fd7d51feedfcf0d0a86f5d57363d09c963
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-frdm-pro.dts
@@ -0,0 +1,1049 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2026 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx95.dtsi"
+
+#define FALLING_EDGE		1
+#define RISING_EDGE		2
+
+#define BRD_SM_CTRL_SD3_WAKE		0x8000	/*!< PCAL6408A-0 */
+#define BRD_SM_CTRL_PCIE1_WAKE		0x8001	/*!< PCAL6408A-4 */
+#define BRD_SM_CTRL_BT_WAKE		0x8002	/*!< PCAL6408A-5 */
+#define BRD_SM_CTRL_PCIE2_WAKE		0x8003	/*!< PCAL6408A-6 */
+#define BRD_SM_CTRL_BUTTON		0x8004	/*!< PCAL6408A-7 */
+
+/ {
+	model = "NXP FRDM-IMX95-PRO";
+	compatible = "fsl,imx95-19x19-frdm-pro", "fsl,imx95";
+
+	aliases {
+		ethernet0 = &enetc_port0;
+		ethernet1 = &enetc_port1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial4 = &lpuart5;
+	};
+
+	bt_sco_codec: bt_sco_codec {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	flexcan1_phy: can-phy0 {
+		compatible = "nxp,tja1057";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		silent-gpios = <&i2c4_gpio_expander_22 11 GPIO_ACTIVE_LOW>;
+	};
+
+	flexcan3_phy: can-phy2 {
+		compatible = "nxp,tja1057";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		silent-gpios = <&i2c4_gpio_expander_22 13 GPIO_ACTIVE_LOW>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		stdout-path = &lpuart1;
+	};
+
+	reg_vref_1v8: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "+V1.8_SW";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_SW";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+	};
+
+	reg_dcdc_3v3: regulator-dcdc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "DCDC_3V3";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		vin-supply = <&reg_dcdc_5v>;
+		gpio = <&i2c4_gpio_expander_22 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_dcdc_5v: regulator-dcdc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "DCDC_5V";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		gpio = <&i2c4_gpio_expander_22 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_exp_1v8: regulator-exp-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EXP_1V8";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		gpio = <&i2c4_gpio_expander_22 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_exp_3v3: regulator-exp-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "EXP_3V3";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		vin-supply = <&reg_dcdc_3v3>;
+		gpio = <&i2c4_gpio_expander_22 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_exp_5v: regulator-exp-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "EXP_5V";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		vin-supply = <&reg_dcdc_5v>;
+		gpio = <&i2c4_gpio_expander_22 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_ext_12v: regulator-ext-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCEXT_12V";
+		regulator-always-on;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		gpio = <&i2c4_gpio_expander_22 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_m2_mkey_1_pwr: regulator-m2-mkey-1-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power-mkey-1";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&i2c3_gpio_expander_20 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_m2_mkey_2_pwr: regulator-m2-mkey-2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power-mkey-2";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&i2c3_gpio_expander_20 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_m2_ekey_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "M.2-power-ekey";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&i2c4_gpio_expander_22 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SD2_3V3";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc3_vmmc: regulator-usdhc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "WLAN_EN";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		vin-supply = <&reg_m2_ekey_pwr>;
+		gpio = <&i2c4_gpio_expander_22 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * IW612 wifi chip needs more delay than other wifi chips to complete
+		 * the host interface initialization after power up, otherwise the
+		 * internal state of IW612 may be unstable, resulting in the failure of
+		 * the SDIO3.0 switch voltage.
+		 */
+		startup-delay-us = <20000>;
+	};
+
+	reg_usb_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		gpio = <&i2c4_gpio_expander_22 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7F000000>;
+			reusable;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+		};
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,bitclock-master = <&btcpu>;
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,name = "bt-sco-audio";
+
+		simple-audio-card,codec {
+			sound-dai = <&bt_sco_codec 1>;
+		};
+
+		btcpu: simple-audio-card,cpu {
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+			sound-dai = <&sai5>;
+		};
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			format = "i2s";
+			link-name = "micfil hifi";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-mqs {
+		compatible = "audio-graph-card2";
+		links = <&sai1_port1>;
+		label = "mqs-audio";
+	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&i2c4_gpio_expander_22 9 GPIO_ACTIVE_LOW>;
+	};
+
+	memory@80000000 {
+		reg = <0x0 0x80000000 0 0x80000000>;
+		device_type = "memory";
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&enetc_port0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&enetc_port1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&flexcan1 {
+	phys = <&flexcan1_phy>;
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&flexcan3 {
+	phys = <&flexcan3_phy>;
+	pinctrl-0 = <&pinctrl_flexcan3>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	i2c3_gpio_expander_20: i2c3-gpio-expander@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		pinctrl-0 = <&pinctrl_pcal6416>;
+		pinctrl-names = "default";
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_ptn5110>;
+		pinctrl-names = "default";
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <0>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 0, PDO_FIXED_USB_COMM)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_con_hs: endpoint {
+						remote-endpoint = <&usb3_data_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	i2c4_gpio_expander_22: i2c4-gpio-expander@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "USB2 Power Enable",
+				  "DCDC5V Enable",
+				  "",
+				  "SE Enable",
+				  "",
+				  "EXP 5V Enable",
+				  "EXP 3V3 Enable",
+				  "WIFI Power Enable",
+				  "M2 DIS1 B",
+				  "WIFI SD3 Reset",
+				  "EXP 1V8 Enable",
+				  "CAN1 Standby",
+				  "M2 DIS2",
+				  "CAN2 Standby",
+				  "ETH 10G IO4",
+				  "ETH 10G IO3",
+				  "SPI3/GPIO select",
+				  "EXP 12V Enable",
+				  "DCDC 3V3 Enable",
+				  "PCIE1 Reset",
+				  "",
+				  "ETH 10G CLK Enable",
+				  "LVDS to HDMI converter IT6263 reset",
+				  "";
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		pinctrl-names = "default";
+
+		/* When high, select lpspi; When low, select gpio. */
+		lpspi-gpio-sel-hog {
+			gpios = <16 GPIO_ACTIVE_HIGH>;
+			gpio-hog;
+			output-high;
+		};
+	};
+};
+
+&lpuart1 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart5 {
+	/* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&micfil {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_PDM>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <49152000>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_pdm>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mqs1 {
+	clocks = <&scmi_clk IMX95_CLK_SAI1>;
+	clock-names = "mclk";
+	pinctrl-0 = <&pinctrl_mqs1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mqs1_port: port {
+		mqs1_ep: endpoint {
+			dai-format = "left_j";
+			remote-endpoint = <&sai1_port1_ep>;
+		};
+	};
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+&netc_emdio {
+	pinctrl-0 = <&pinctrl_emdio>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&i2c3_gpio_expander_20 1 GPIO_ACTIVE_LOW>;
+	};
+
+	ethphy1: ethernet-phy@2 {
+		reg = <2>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&i2c3_gpio_expander_20 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&netc_timer {
+	status = "okay";
+};
+
+&netcmix_blk_ctrl {
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	reset-gpio = <&i2c4_gpio_expander_22 19 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_m2_mkey_1_pwr>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	reset-gpio = <&i2c3_gpio_expander_20 9 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_m2_mkey_2_pwr>;
+	status = "okay";
+};
+
+&sai1 {
+	clocks = <&scmi_clk IMX95_CLK_BUSAON>, <&dummy>,
+		 <&scmi_clk IMX95_CLK_SAI1>, <&dummy>,
+		 <&dummy>, <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+		 <&scmi_clk IMX95_CLK_AUDIOPLL2>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI1>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <24576000>;
+	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* leave unconnected - no RX in the context of MQS */
+		port@0 {
+			reg = <0>;
+
+			endpoint {
+			};
+		};
+
+		sai1_port1: port@1 {
+			reg = <1>;
+			mclk-fs = <512>;
+
+			sai1_port1_ep: endpoint {
+				dai-format = "left_j";
+				system-clock-direction-out;
+				bitclock-master;
+				frame-master;
+				remote-endpoint = <&mqs1_ep>;
+			};
+		};
+	};
+};
+
+&sai5 {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_SAI5>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <12288000>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_sai5>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+	pinctrl-names = "default";
+
+	pinctrl_emdio: emdiogrp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC		0x50e
+			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO		0x90e
+		>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x50e
+			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x50e
+			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x50e
+			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x50e
+			IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK	0x58e
+			IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x57e
+			IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x57e
+			IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x57e
+			IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x57e
+		>;
+	};
+
+	pinctrl_enetc1: enetc1grp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x50e
+			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x50e
+			IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x50e
+			IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x50e
+			IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK	0x58e
+			IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0		0x57e
+			IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1		0x57e
+			IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2		0x57e
+			IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3		0x57e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			IMX95_PAD_SAI1_TXD0__AONMIX_TOP_CAN1_TX			0x39e
+			IMX95_PAD_SAI1_TXC__AONMIX_TOP_CAN1_RX			0x39e
+		>;
+	};
+
+	pinctrl_flexcan3: flexcan3grp {
+		fsl,pins = <
+			IMX95_PAD_CCM_CLKO3__CAN3_TX				0x39e
+			IMX95_PAD_CCM_CLKO4__CAN3_RX				0x39e
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11			0x31e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL		0x40000b9e
+			IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL		0x40000b9e
+			IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO28__LPI2C3_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO29__LPI2C3_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO30__LPI2C4_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO31__LPI2C4_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_mipi_dsi_csi: mipidsigrp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_DATA6__GPIO5_IO_BIT6			0x31e
+		>;
+	};
+
+	pinctrl_mqs1: mqs1grp {
+		fsl,pins = <
+			IMX95_PAD_SAI1_TXFS__AONMIX_TOP_MQS1_LEFT		0x31e
+			IMX95_PAD_SAI1_RXD0__AONMIX_TOP_MQS1_RIGHT		0x31e
+		>;
+	};
+
+	pinctrl_pcal6416: pcal6416grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14			0x31
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14			0x31e
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B		0x4000031e
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B		0x4000031e
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK				0x31e
+			IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0	0x31e
+		>;
+	};
+
+	pinctrl_ptn5110: ptn5110grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_DQS__GPIO5_IO_BIT8			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7			0x31e
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0		0x31e
+			IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK			0x31e
+			IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC			0x31e
+			IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0		0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX		0x31e
+			IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX			0x31e
+			IMX95_PAD_DAP_TDI__LPUART5_RX				0x31e
+			IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B			0x31e
+			IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B			0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x15fe
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x13fe
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x13fe
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x13fe
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x13fe
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x13fe
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x13fe
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x13fe
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x13fe
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x13fe
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x15fe
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x158e
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x138e
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x138e
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x138e
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x138e
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x138e
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x158e
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x138e
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x138e
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x138e
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x138e
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x138e
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x15fe
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x13fe
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x13fe
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x13fe
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x13fe
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x13fe
+		>;
+	};
+};
+
+&scmi_misc {
+	nxp,ctrl-ids = <BRD_SM_CTRL_SD3_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_PCIE1_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_BT_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_PCIE2_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_BUTTON	FALLING_EDGE>;
+};
+
+&thermal_zones {
+	pf09-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 2>;
+
+		trips {
+			pf09_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf09_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53arm-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 4>;
+
+		cooling-maps {
+			map0 {
+				cooling-device = <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				trip = <&pf5301_alert>;
+			};
+		};
+
+		trips {
+			pf5301_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5301_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53soc-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 3>;
+
+		trips {
+			pf5302_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5302_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+};
+
+&usb2 {
+	disable-over-current;
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	role-switch-default-mode = "peripheral";
+	srp-disable;
+	usb-role-switch;
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	status = "okay";
+
+	port {
+		usb3_data_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usb3_phy {
+	orientation-switch;
+	fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>;
+	fsl,phy-pcs-tx-swing-full-percent = <100>;
+	fsl,phy-tx-preemp-amp-tune-microamp = <600>;
+	fsl,phy-tx-vboost-level-microvolt = <1156>;
+	fsl,phy-tx-vref-tune-percent = <100>;
+	status = "okay";
+
+	port {
+		usb3_data_ss: endpoint {
+			remote-endpoint = <&typec_con_ss>;
+		};
+	};
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	bus-width = <4>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog3 {
+	status = "okay";
+};

-- 
2.34.1



^ permalink raw reply related	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/2] arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts
  2026-04-28  8:03 ` [PATCH v2 2/2] arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts Joseph Guo
@ 2026-04-29  1:37   ` Fabio Estevam
  2026-04-29  4:17     ` Joseph Guo (OSS)
  2026-04-29  9:26   ` Daniel Baluta
  1 sibling, 1 reply; 10+ messages in thread
From: Fabio Estevam @ 2026-04-29  1:37 UTC (permalink / raw)
  To: Joseph Guo
  Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, devicetree,
	linux-kernel, imx, linux-arm-kernel, xinyu.chen, qijian.guo,
	justin.jiang

On Tue, Apr 28, 2026 at 5:03 AM Joseph Guo <qijian.guo@nxp.com> wrote:
>
> NXP i.MX95 19x19 FRDM PRO is cost-effective with extensive
> expansion capabilities based on the i.MX95 19x19 SoC.

It would be good to explain the difference between the i.MX95 FRDM PRO
and i.MX95 FRDM.

Also, does it make sense to share common nodes in a dtsi that can be
used by the two variants?


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/2] arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts
  2026-04-29  1:37   ` Fabio Estevam
@ 2026-04-29  4:17     ` Joseph Guo (OSS)
  0 siblings, 0 replies; 10+ messages in thread
From: Joseph Guo (OSS) @ 2026-04-29  4:17 UTC (permalink / raw)
  To: Fabio Estevam, Joseph Guo
  Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Frank Li, Sascha Hauer, Pengutronix Kernel Team, devicetree,
	linux-kernel, imx, linux-arm-kernel, xinyu.chen, justin.jiang

On 4/29/2026 9:37 AM, Fabio Estevam wrote:
> On Tue, Apr 28, 2026 at 5:03 AM Joseph Guo <qijian.guo@nxp.com> wrote:
>>
>> NXP i.MX95 19x19 FRDM PRO is cost-effective with extensive
>> expansion capabilities based on the i.MX95 19x19 SoC.
> 
> It would be good to explain the difference between the i.MX95 FRDM PRO
> and i.MX95 FRDM.
> 
> Also, does it make sense to share common nodes in a dtsi that can be
> used by the two variants?

Hi Fabio,

Yes, I will explain the difference between these two boards in next version.

But actually these two boards have totally different hardware design. So actually only few nodes which
are not related to the hardware (which means the IPs inside the SoC) can be common. 
Their SoC is also different package. 95 FRDM PRO is 19x19 and 95 15x15 FRDM is 15x15.
I think it is enough to create a individual dts for this board.

Regards,
Joseph


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/2] arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts
  2026-04-28  8:03 ` [PATCH v2 2/2] arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts Joseph Guo
  2026-04-29  1:37   ` Fabio Estevam
@ 2026-04-29  9:26   ` Daniel Baluta
  2026-04-29  9:26     ` Joseph Guo (OSS)
  1 sibling, 1 reply; 10+ messages in thread
From: Daniel Baluta @ 2026-04-29  9:26 UTC (permalink / raw)
  To: Joseph Guo, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Shawn Guo, Frank Li, Sascha Hauer, Pengutronix Kernel Team,
	Fabio Estevam
  Cc: devicetree, linux-kernel, imx, linux-arm-kernel, xinyu.chen,
	qijian.guo, justin.jiang

[snip]

> +
> +&flexcan1 {
> +	phys = <&flexcan1_phy>;
> +	pinctrl-0 = <&pinctrl_flexcan1>;
> +	pinctrl-names = "default";
> +	status = "disabled";
> +};

Why add this if it is disabled?


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/2] arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts
  2026-04-29  9:26   ` Daniel Baluta
@ 2026-04-29  9:26     ` Joseph Guo (OSS)
  2026-04-29  9:31       ` Daniel Baluta
  2026-04-29 12:46       ` Francesco Dolcini
  0 siblings, 2 replies; 10+ messages in thread
From: Joseph Guo (OSS) @ 2026-04-29  9:26 UTC (permalink / raw)
  To: Daniel Baluta, Joseph Guo, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Shawn Guo, Frank Li, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam
  Cc: devicetree, linux-kernel, imx, linux-arm-kernel, xinyu.chen,
	justin.jiang

On 4/29/2026 5:26 PM, Daniel Baluta wrote:
> [snip]
> 
>> +
>> +&flexcan1 {
>> +	phys = <&flexcan1_phy>;
>> +	pinctrl-0 = <&pinctrl_flexcan1>;
>> +	pinctrl-names = "default";
>> +	status = "disabled";
>> +};
> 
> Why add this if it is disabled?

Hi Daniel,

The resource of flexcan1 in System Manager is assign to M7 by default. But it is useful if we assign the resource back to A55.
The board hardware have the output pin of flexcan1, so I keep the node here but set it disabled by default.

Regards,
Joseph


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/2] arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts
  2026-04-29  9:26     ` Joseph Guo (OSS)
@ 2026-04-29  9:31       ` Daniel Baluta
  2026-04-29  9:29         ` Joseph Guo (OSS)
  2026-04-29 12:46       ` Francesco Dolcini
  1 sibling, 1 reply; 10+ messages in thread
From: Daniel Baluta @ 2026-04-29  9:31 UTC (permalink / raw)
  To: Joseph Guo (OSS), Joseph Guo, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Shawn Guo, Frank Li, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam
  Cc: devicetree, linux-kernel, imx, linux-arm-kernel, xinyu.chen,
	justin.jiang

On 4/29/26 12:26, Joseph Guo (OSS) wrote:
> On 4/29/2026 5:26 PM, Daniel Baluta wrote:
>> [snip]
>>
>>> +
>>> +&flexcan1 {
>>> +	phys = <&flexcan1_phy>;
>>> +	pinctrl-0 = <&pinctrl_flexcan1>;
>>> +	pinctrl-names = "default";
>>> +	status = "disabled";
>>> +};
>>
>> Why add this if it is disabled?
> 
> Hi Daniel,
> 
> The resource of flexcan1 in System Manager is assign to M7 by default. But it is useful if we assign the resource back to A55.
> The board hardware have the output pin of flexcan1, so I keep the node here but set it disabled by default.

Well then at least add a comment above to explain this. 


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/2] arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts
  2026-04-29  9:31       ` Daniel Baluta
@ 2026-04-29  9:29         ` Joseph Guo (OSS)
  0 siblings, 0 replies; 10+ messages in thread
From: Joseph Guo (OSS) @ 2026-04-29  9:29 UTC (permalink / raw)
  To: Daniel Baluta, Joseph Guo, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Shawn Guo, Frank Li, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam
  Cc: devicetree, linux-kernel, imx, linux-arm-kernel, xinyu.chen,
	justin.jiang

On 4/29/2026 5:31 PM, Daniel Baluta wrote:
> On 4/29/26 12:26, Joseph Guo (OSS) wrote:
>> On 4/29/2026 5:26 PM, Daniel Baluta wrote:
>>> [snip]
>>>
>>>> +
>>>> +&flexcan1 {
>>>> +	phys = <&flexcan1_phy>;
>>>> +	pinctrl-0 = <&pinctrl_flexcan1>;
>>>> +	pinctrl-names = "default";
>>>> +	status = "disabled";
>>>> +};
>>>
>>> Why add this if it is disabled?
>>
>> Hi Daniel,
>>
>> The resource of flexcan1 in System Manager is assign to M7 by default. But it is useful if we assign the resource back to A55.
>> The board hardware have the output pin of flexcan1, so I keep the node here but set it disabled by default.
> 
> Well then at least add a comment above to explain this. 

Thanks to point out this. Will add comment in next version.

Regards,
Joseph


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/2] arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts
  2026-04-29  9:26     ` Joseph Guo (OSS)
  2026-04-29  9:31       ` Daniel Baluta
@ 2026-04-29 12:46       ` Francesco Dolcini
  1 sibling, 0 replies; 10+ messages in thread
From: Francesco Dolcini @ 2026-04-29 12:46 UTC (permalink / raw)
  To: Joseph Guo (OSS)
  Cc: Daniel Baluta, Joseph Guo, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Shawn Guo, Frank Li, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, devicetree, linux-kernel,
	imx, linux-arm-kernel, xinyu.chen, justin.jiang

On Wed, Apr 29, 2026 at 05:26:02PM +0800, Joseph Guo (OSS) wrote:
> On 4/29/2026 5:26 PM, Daniel Baluta wrote:
> >> +
> >> +&flexcan1 {
> >> +	phys = <&flexcan1_phy>;
> >> +	pinctrl-0 = <&pinctrl_flexcan1>;
> >> +	pinctrl-names = "default";
> >> +	status = "disabled";
> >> +};
> > 
> > Why add this if it is disabled?
> 
> The resource of flexcan1 in System Manager is assign to M7 by default.

I think the correct status in such a case is "reserved", am I wrong?

Francesco



^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2026-04-29 12:46 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-04-28  8:03 [PATCH v2 0/2] Add NXP FRDM-IMX95-PRO board support Joseph Guo
2026-04-28  8:03 ` [PATCH v2 1/2] dt-bindings: arm: fsl: Add i.MX95 19x19 FRDM PRO board Joseph Guo
2026-04-28  8:03 ` [PATCH v2 2/2] arm64: dts: freescale: add i.MX95 19x19 FRDM PRO board dts Joseph Guo
2026-04-29  1:37   ` Fabio Estevam
2026-04-29  4:17     ` Joseph Guo (OSS)
2026-04-29  9:26   ` Daniel Baluta
2026-04-29  9:26     ` Joseph Guo (OSS)
2026-04-29  9:31       ` Daniel Baluta
2026-04-29  9:29         ` Joseph Guo (OSS)
2026-04-29 12:46       ` Francesco Dolcini

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox