* [PATCH 7/7] ARM: dts: rockchip: Add Alientek DLRV1126
[not found] <20260624-rv1126-alientek-dlrv1126-v1-0-dc42d99f75a7@gmail.com>
@ 2026-06-24 9:02 ` Yanan He
2026-06-24 15:44 ` Andrew Lunn
0 siblings, 1 reply; 2+ messages in thread
From: Yanan He @ 2026-06-24 9:02 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, heiko, andrew+netdev, davem, edumazet,
kuba, pabeni, david.wu, mcoquelin.stm32, alexandre.torgue
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-rockchip,
netdev, linux-stm32, grumpycat921013
The board consists of a CLRV1126F core module and a DLRV1126 carrier
board. The core module contains the RV1126 SoC, eMMC and RK809 PMIC,
while the carrier board provides Ethernet, SD card, AP6212 WiFi and
Bluetooth, PCF8563 RTC, ADC keys, GPIO LEDs and audio connectors.
The board has been tested with Ethernet/NFS boot, eMMC, SD card, SDIO
WiFi enumeration, Bluetooth LE scanning, RTC, ADC keys, GPIO LEDs and
RK809 audio card registration.
Signed-off-by: Yanan He <grumpycat921013@gmail.com>
---
arch/arm/boot/dts/rockchip/Makefile | 1 +
.../dts/rockchip/rv1126-alientek-clrv1126f.dtsi | 277 +++++++++++++++++++++
.../boot/dts/rockchip/rv1126-alientek-dlrv1126.dts | 258 +++++++++++++++++++
3 files changed, 536 insertions(+)
diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile
index d0154fd7ff24..e9f9e0ac3bfd 100644
--- a/arch/arm/boot/dts/rockchip/Makefile
+++ b/arch/arm/boot/dts/rockchip/Makefile
@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rv1108-evb.dtb \
rv1109-relfor-saib.dtb \
rv1109-sonoff-ihost.dtb \
+ rv1126-alientek-dlrv1126.dtb \
rv1126-edgeble-neu2-io.dtb \
rv1126-sonoff-ihost.dtb \
rk3036-evb.dtb \
diff --git a/arch/arm/boot/dts/rockchip/rv1126-alientek-clrv1126f.dtsi b/arch/arm/boot/dts/rockchip/rv1126-alientek-clrv1126f.dtsi
new file mode 100644
index 000000000000..9bee424b1797
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1126-alientek-clrv1126f.dtsi
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2026 Yanan He <grumpycat921013@gmail.com>
+ */
+
+#include "rv1126.dtsi"
+
+/ {
+ compatible = "alientek,clrv1126f", "rockchip,rv1126";
+
+ aliases {
+ mmc0 = &emmc;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
+ rockchip,default-sample-phase = <90>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ #sound-dai-cells = <0>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+ clock-names = "mclk";
+ clocks = <&cru MCLK_I2S0_TX_OUT2IO>;
+ assigned-clocks = <&cru MCLK_I2S0_TX_OUT2IO>;
+ assigned-clock-parents = <&cru MCLK_I2S0_TX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc_buck5>;
+ vcc6-supply = <&vcc_buck5>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ regulators {
+ vdd_npu_vepu: DCDC_REG1 {
+ regulator-name = "vdd_npu_vepu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG4 {
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_buck5: DCDC_REG5 {
+ regulator-name = "vcc_buck5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2200000>;
+ };
+ };
+
+ vcc_0v8: LDO_REG1 {
+ regulator-name = "vcc_0v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG2 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd0v8_pmu: LDO_REG3 {
+ regulator-name = "vcc0v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <800000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_dovdd: LDO_REG5 {
+ regulator-name = "vcc_dovdd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_dvdd: LDO_REG6 {
+ regulator-name = "vcc_dvdd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_avdd: LDO_REG7 {
+ regulator-name = "vcc_avdd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG8 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: LDO_REG9 {
+ regulator-name = "vcc3v3_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_5v0: SWITCH_REG1 {
+ regulator-name = "vcc_5v0";
+ };
+
+ vcc_3v3: SWITCH_REG2 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio0-supply = <&vcc3v3_sys>;
+ pmuio1-supply = <&vcc3v3_sys>;
+ vccio1-supply = <&vcc_1v8>;
+ vccio2-supply = <&vccio_sd>;
+ vccio3-supply = <&vcc_1v8>;
+ vccio4-supply = <&vcc_3v3>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_3v3>;
+ vccio7-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rockchip/rv1126-alientek-dlrv1126.dts b/arch/arm/boot/dts/rockchip/rv1126-alientek-dlrv1126.dts
new file mode 100644
index 000000000000..c8123a3c4746
--- /dev/null
+++ b/arch/arm/boot/dts/rockchip/rv1126-alientek-dlrv1126.dts
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2026 Yanan He <grumpycat921013@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rv1126-alientek-clrv1126f.dtsi"
+
+/ {
+ model = "Alientek ATK-DLRV1126";
+ compatible = "alientek,dlrv1126", "alientek,clrv1126f", "rockchip,rv1126";
+
+ aliases {
+ ethernet0 = &gmac;
+ mmc1 = &sdio;
+ mmc2 = &sdmmc;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-esc {
+ label = "esc";
+ linux,code = <KEY_ESC>;
+ press-threshold-microvolt = <0>;
+ };
+
+ button-right {
+ label = "right";
+ linux,code = <KEY_RIGHT>;
+ press-threshold-microvolt = <400781>;
+ };
+
+ button-left {
+ label = "left";
+ linux,code = <KEY_LEFT>;
+ press-threshold-microvolt = <801562>;
+ };
+
+ button-menu {
+ label = "menu";
+ linux,code = <KEY_MENU>;
+ press-threshold-microvolt = <1198828>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "sys-led";
+ gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+
+ led-1 {
+ label = "user-led";
+ gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "on";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "Analog RK809";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Speaker", "Speaker",
+ "Headphone", "Headphones",
+ "Microphone", "Mic Jack";
+ simple-audio-card,routing =
+ "Speaker", "SPKO",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR",
+ "MICL", "Mic Jack";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&rk809>;
+ };
+ };
+
+ vcc5v0_sys: regulator-vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ sdio_pwrseq: pwrseq-sdio {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ power-off-delay-us = <20000>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PD0 IRQ_TYPE_LEVEL_LOW>;
+ clock-output-names = "xin32k";
+ };
+};
+
+&gmac {
+ phy-mode = "rgmii";
+ clock_in_out = "input";
+ assigned-clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>,
+ <&cru CLK_GMAC_ETHERNET_OUT>;
+ assigned-clock-parents = <&cru CLK_GMAC_SRC_M1>,
+ <&cru RGMII_MODE_CLK>;
+ assigned-clock-rates = <125000000>, <0>, <25000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim1_miim &rgmiim1_bus2 &rgmiim1_bus4
+ &clk_out_ethernetm1_pins>;
+ tx_delay = <0x2a>;
+ rx_delay = <0x1a>;
+ phy-handle = <&phy>;
+ status = "okay";
+};
+
+&mdio {
+ phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ clocks = <&cru CLK_GMAC_ETHERNET_OUT>;
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_phy_rst>;
+ reset-gpios = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ };
+};
+
+&pinctrl {
+ ethernet {
+ eth_phy_rst: eth-phy-rst {
+ rockchip,pins = <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ bt {
+ bt_enable: bt-enable {
+ rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_dev: bt-wake-dev {
+ rockchip,pins = <1 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host: bt-wake-host {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ max-frequency = <25000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+ rockchip,default-sample-phase = <90>;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+ rockchip,default-sample-phase = <90>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43430a1-bt";
+ shutdown-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+ clocks = <&rk809 1>;
+ clock-names = "lpo";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA5 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "host-wakeup";
+ max-speed = <115200>;
+ vbat-supply = <&vcc_3v3>;
+ vddio-supply = <&vcc_1v8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&i2s0 {
+ rockchip,trcm-sync-tx-only;
+ rockchip,i2s-rx-route = <3 1 2 0>;
+ rockchip,i2s-tx-route = <0 1 2 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0m0_sclk_tx>,
+ <&i2s0m0_mclk>,
+ <&i2s0m0_lrck_tx>,
+ <&i2s0m0_sdo0>,
+ <&i2s0m0_sdo1_sdi3>;
+ status = "okay";
+};
--
2.54.0
^ permalink raw reply related [flat|nested] 2+ messages in thread