* [PATCH] S3C2443: Fix bit-reset in setrate of clk_armdiv
From: Kukjin Kim @ 2011-09-26 4:26 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <201109222309.00068.heiko@sntech.de>
Heiko St?bner wrote:
>
> The changed statement should set the old armdiv bits to 0
> and not everything else, before setting the new value.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> arch/arm/mach-s3c2443/clock.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
> index 966bde5..27549c4 100644
> --- a/arch/arm/mach-s3c2443/clock.c
> +++ b/arch/arm/mach-s3c2443/clock.c
> @@ -124,7 +124,7 @@ static int s3c2443_armclk_setrate(struct clk *clk,
unsigned
> long rate)
> unsigned long clkcon0;
>
> clkcon0 = __raw_readl(S3C2443_CLKDIV0);
> - clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
> + clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
> clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
> __raw_writel(clkcon0, S3C2443_CLKDIV0);
> }
> --
> 1.7.2.3
Hi Heiko,
Yes, you're right.
Applied, thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply
* [PATCH] ARM: S3C64xx: Add LDOVDD supply for CODEC on Cragganmore
From: Kukjin Kim @ 2011-09-26 4:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1316714477-19994-1-git-send-email-broonie@opensource.wolfsonmicro.com>
Mark Brown wrote:
>
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
> arch/arm/mach-s3c64xx/mach-crag6410.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-
> s3c64xx/mach-crag6410.c
> index a53b02e..613c165 100644
> --- a/arch/arm/mach-s3c64xx/mach-crag6410.c
> +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
> @@ -582,6 +582,7 @@ static struct regulator_init_data pvdd_1v2 __initdata
= {
> };
>
> static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata =
{
> + REGULATOR_SUPPLY("LDOVDD", "1-001a"),
> REGULATOR_SUPPLY("PLLVDD", "1-001a"),
> REGULATOR_SUPPLY("DBVDD", "1-001a"),
> REGULATOR_SUPPLY("DBVDD1", "1-001a"),
> --
> 1.7.6.3
Applied.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply
* [PATCH 0/4 v2] iommu/exynos: Add IOMMU and Enhance System MMU driver for Exynos4
From: KyongHo Cho @ 2011-09-26 4:42 UTC (permalink / raw)
To: linux-arm-kernel
This is the second try of submitting patches about IOMMU/System MMU
driver for Exynos4 SoCs with the fixes of the following probles
pointed by Russell King.:
- Missing unlocking a spinlock in exynos_iommu_attach_dev().
- atomic_t -> int in sysmmu_drvdata.activations
- sysmmu_platdata -> sysmmu_drvdata
- Change in error messages in irq handler
- Removed casting in format of error message
- omap_iommu_ops -> exynos_iommu_ops in the last patch.
First 2 patches enhance System MMU platform device definition:
- Removed System MMU for MDMA0 in LCD block because it is not used.
Use MDMA2 in TOP block.
- Removed System MMU ID. Instead a System MMU is bound to a device that
the System MMU is dedicated during machin initialization. If a device
driver wants to handle System MMU, it must bind its device with System
MMU with sysmmu_set_owner().
- clkdev
- System MMU device driver is removed from arch/arm/plat-s5p to move it
to driver/iommu directory.
Last 2 patches implements IOMMU API:
- Implements IOMMU API and System MMU driver that is moved from
arch/arm/plat-s5p.
- Implements fault handling that is suggested by Ohad.
- Used bus_set_iommu instead of register_iommu that is suggested by Joerg.
Regards,
Cho KyongHo.
Diffstats:
arch/arm/mach-exynos4/Kconfig | 2 -
arch/arm/mach-exynos4/clock.c | 43 +-
arch/arm/mach-exynos4/dev-sysmmu.c | 270 ++------
arch/arm/mach-exynos4/include/mach/irqs.h | 1 -
arch/arm/mach-exynos4/include/mach/map.h | 1 -
arch/arm/mach-exynos4/include/mach/sysmmu.h | 85 ++-
arch/arm/mach-exynos4/mach-armlex4210.c | 24 +-
arch/arm/mach-exynos4/mach-smdkv310.c | 28 +-
arch/arm/plat-s5p/Kconfig | 8 -
arch/arm/plat-s5p/Makefile | 1 -
arch/arm/plat-s5p/include/plat/sysmmu.h | 95 ---
arch/arm/plat-s5p/sysmmu.c | 312 ---------
drivers/iommu/Kconfig | 14 +
drivers/iommu/Makefile | 1 +
drivers/iommu/exynos_iommu.c | 933 +++++++++++++++++++++++++++
15 files changed, 1134 insertions(+), 684 deletions(-)
^ permalink raw reply
* [PATCH 1/4 v2] ARM: EXYNOS4: Change System MMU device definition
From: KyongHo Cho @ 2011-09-26 4:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1317012170-28597-1-git-send-email-pullip.cho@samsung.com>
This patch contains a lot of changes of System MMU device definition.
1. Removed sysmmu_ips enumeration that are definitions of ID of System MMU
Instead, a System MMU device descriptor must be bound with a device
descriptor that needs System MMU in machine initialization.
2. Removed MDMA that is included in LCD0 block because it is not used
anymore. Use MDMA in TOP block.
3. Changed System MMU definitions of platform device. It is not an array
anymore.
Signed-off-by: KyongHo Cho <pullip.cho@samsung.com>
---
arch/arm/mach-exynos4/Kconfig | 2 -
arch/arm/mach-exynos4/clock.c | 43 +++--
arch/arm/mach-exynos4/dev-sysmmu.c | 270 ++++++---------------------
arch/arm/mach-exynos4/include/mach/irqs.h | 1 -
arch/arm/mach-exynos4/include/mach/map.h | 1 -
arch/arm/mach-exynos4/include/mach/sysmmu.h | 85 +++++----
arch/arm/mach-exynos4/mach-armlex4210.c | 24 +++-
arch/arm/mach-exynos4/mach-smdkv310.c | 28 +++-
8 files changed, 186 insertions(+), 268 deletions(-)
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 3b594fe..e9ccf5e 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -141,7 +141,6 @@ config MACH_SMDKV310
select SAMSUNG_DEV_KEYPAD
select EXYNOS4_DEV_PD
select SAMSUNG_DEV_PWM
- select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
@@ -158,7 +157,6 @@ config MACH_ARMLEX4210
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select EXYNOS4_DEV_AHCI
- select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_SDHCI
help
Machine support for Samsung ARMLEX4210 based on EXYNOS4210
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index da9567a..b907d5f 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -691,59 +691,68 @@ static struct clk init_clocks_off[] = {
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 14),
}, {
- .name = "SYSMMU_MDMA",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "SYSMMU_FIMC0",
+ .name = "sysmmu",
+ .devname = SYSMMU_CLOCK_NAME(fimc0, 1),
.enable = exynos4_clk_ip_cam_ctrl,
.ctrlbit = (1 << 7),
}, {
- .name = "SYSMMU_FIMC1",
+ .name = "sysmmu",
+ .devname = SYSMMU_CLOCK_NAME(fimc1, 2),
.enable = exynos4_clk_ip_cam_ctrl,
.ctrlbit = (1 << 8),
}, {
- .name = "SYSMMU_FIMC2",
+ .name = "sysmmu",
+ .devname = SYSMMU_CLOCK_NAME(fimc2, 3),
.enable = exynos4_clk_ip_cam_ctrl,
.ctrlbit = (1 << 9),
}, {
- .name = "SYSMMU_FIMC3",
+ .name = "sysmmu",
+ .devname = SYSMMU_CLOCK_NAME(fimc3, 4),
.enable = exynos4_clk_ip_cam_ctrl,
.ctrlbit = (1 << 10),
}, {
- .name = "SYSMMU_JPEG",
+ .name = "sysmmu",
+ .devname = SYSMMU_CLOCK_NAME(jpeg, 5),
.enable = exynos4_clk_ip_cam_ctrl,
.ctrlbit = (1 << 11),
}, {
- .name = "SYSMMU_FIMD0",
+ .name = "sysmmu",
+ .devname = SYSMMU_CLOCK_NAME(fimd0, 6),
.enable = exynos4_clk_ip_lcd0_ctrl,
.ctrlbit = (1 << 4),
}, {
- .name = "SYSMMU_FIMD1",
+ .name = "sysmmu",
+ .devname = SYSMMU_CLOCK_NAME(fimd1, 7),
.enable = exynos4_clk_ip_lcd1_ctrl,
.ctrlbit = (1 << 4),
}, {
- .name = "SYSMMU_PCIe",
+ .name = "sysmmu",
+ .devname = SYSMMU_CLOCK_NAME(pcie, 8),
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 18),
}, {
- .name = "SYSMMU_G2D",
+ .name = "sysmmu",
+ .devname = SYSMMU_CLOCK_NAME(g2d, 9),
.enable = exynos4_clk_ip_image_ctrl,
.ctrlbit = (1 << 3),
}, {
- .name = "SYSMMU_ROTATOR",
+ .name = "sysmmu",
+ .devname = SYSMMU_CLOCK_NAME(rot, 10),
.enable = exynos4_clk_ip_image_ctrl,
.ctrlbit = (1 << 4),
}, {
- .name = "SYSMMU_TV",
+ .name = "sysmmu",
+ .devname = SYSMMU_CLOCK_NAME(tv, 12),
.enable = exynos4_clk_ip_tv_ctrl,
.ctrlbit = (1 << 4),
}, {
- .name = "SYSMMU_MFC_L",
+ .name = "sysmmu",
+ .devname = SYSMMU_CLOCK_NAME(mfc_l, 13),
.enable = exynos4_clk_ip_mfc_ctrl,
.ctrlbit = (1 << 1),
}, {
- .name = "SYSMMU_MFC_R",
+ .name = "sysmmu",
+ .devname = SYSMMU_CLOCK_NAME(mfc_r, 14),
.enable = exynos4_clk_ip_mfc_ctrl,
.ctrlbit = (1 << 2),
}
diff --git a/arch/arm/mach-exynos4/dev-sysmmu.c b/arch/arm/mach-exynos4/dev-sysmmu.c
index 3b7cae0..2a5736b 100644
--- a/arch/arm/mach-exynos4/dev-sysmmu.c
+++ b/arch/arm/mach-exynos4/dev-sysmmu.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-exynos4/dev-sysmmu.c
*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4 - System MMU support
@@ -12,221 +12,71 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+#include <plat/s5p-clock.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/sysmmu.h>
-#include <plat/s5p-clock.h>
-
-/* These names must be equal to the clock names in mach-exynos4/clock.c */
-const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM] = {
- "SYSMMU_MDMA" ,
- "SYSMMU_SSS" ,
- "SYSMMU_FIMC0" ,
- "SYSMMU_FIMC1" ,
- "SYSMMU_FIMC2" ,
- "SYSMMU_FIMC3" ,
- "SYSMMU_JPEG" ,
- "SYSMMU_FIMD0" ,
- "SYSMMU_FIMD1" ,
- "SYSMMU_PCIe" ,
- "SYSMMU_G2D" ,
- "SYSMMU_ROTATOR",
- "SYSMMU_MDMA2" ,
- "SYSMMU_TV" ,
- "SYSMMU_MFC_L" ,
- "SYSMMU_MFC_R" ,
-};
-
-static struct resource exynos4_sysmmu_resource[] = {
- [0] = {
- .start = EXYNOS4_PA_SYSMMU_MDMA,
- .end = EXYNOS4_PA_SYSMMU_MDMA + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_SYSMMU_MDMA0_0,
- .end = IRQ_SYSMMU_MDMA0_0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = EXYNOS4_PA_SYSMMU_SSS,
- .end = EXYNOS4_PA_SYSMMU_SSS + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [3] = {
- .start = IRQ_SYSMMU_SSS_0,
- .end = IRQ_SYSMMU_SSS_0,
- .flags = IORESOURCE_IRQ,
- },
- [4] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC0,
- .end = EXYNOS4_PA_SYSMMU_FIMC0 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [5] = {
- .start = IRQ_SYSMMU_FIMC0_0,
- .end = IRQ_SYSMMU_FIMC0_0,
- .flags = IORESOURCE_IRQ,
- },
- [6] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC1,
- .end = EXYNOS4_PA_SYSMMU_FIMC1 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [7] = {
- .start = IRQ_SYSMMU_FIMC1_0,
- .end = IRQ_SYSMMU_FIMC1_0,
- .flags = IORESOURCE_IRQ,
- },
- [8] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC2,
- .end = EXYNOS4_PA_SYSMMU_FIMC2 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [9] = {
- .start = IRQ_SYSMMU_FIMC2_0,
- .end = IRQ_SYSMMU_FIMC2_0,
- .flags = IORESOURCE_IRQ,
- },
- [10] = {
- .start = EXYNOS4_PA_SYSMMU_FIMC3,
- .end = EXYNOS4_PA_SYSMMU_FIMC3 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [11] = {
- .start = IRQ_SYSMMU_FIMC3_0,
- .end = IRQ_SYSMMU_FIMC3_0,
- .flags = IORESOURCE_IRQ,
- },
- [12] = {
- .start = EXYNOS4_PA_SYSMMU_JPEG,
- .end = EXYNOS4_PA_SYSMMU_JPEG + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [13] = {
- .start = IRQ_SYSMMU_JPEG_0,
- .end = IRQ_SYSMMU_JPEG_0,
- .flags = IORESOURCE_IRQ,
- },
- [14] = {
- .start = EXYNOS4_PA_SYSMMU_FIMD0,
- .end = EXYNOS4_PA_SYSMMU_FIMD0 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [15] = {
- .start = IRQ_SYSMMU_LCD0_M0_0,
- .end = IRQ_SYSMMU_LCD0_M0_0,
- .flags = IORESOURCE_IRQ,
- },
- [16] = {
- .start = EXYNOS4_PA_SYSMMU_FIMD1,
- .end = EXYNOS4_PA_SYSMMU_FIMD1 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [17] = {
- .start = IRQ_SYSMMU_LCD1_M1_0,
- .end = IRQ_SYSMMU_LCD1_M1_0,
- .flags = IORESOURCE_IRQ,
- },
- [18] = {
- .start = EXYNOS4_PA_SYSMMU_PCIe,
- .end = EXYNOS4_PA_SYSMMU_PCIe + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [19] = {
- .start = IRQ_SYSMMU_PCIE_0,
- .end = IRQ_SYSMMU_PCIE_0,
- .flags = IORESOURCE_IRQ,
- },
- [20] = {
- .start = EXYNOS4_PA_SYSMMU_G2D,
- .end = EXYNOS4_PA_SYSMMU_G2D + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [21] = {
- .start = IRQ_SYSMMU_2D_0,
- .end = IRQ_SYSMMU_2D_0,
- .flags = IORESOURCE_IRQ,
- },
- [22] = {
- .start = EXYNOS4_PA_SYSMMU_ROTATOR,
- .end = EXYNOS4_PA_SYSMMU_ROTATOR + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [23] = {
- .start = IRQ_SYSMMU_ROTATOR_0,
- .end = IRQ_SYSMMU_ROTATOR_0,
- .flags = IORESOURCE_IRQ,
- },
- [24] = {
- .start = EXYNOS4_PA_SYSMMU_MDMA2,
- .end = EXYNOS4_PA_SYSMMU_MDMA2 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [25] = {
- .start = IRQ_SYSMMU_MDMA1_0,
- .end = IRQ_SYSMMU_MDMA1_0,
- .flags = IORESOURCE_IRQ,
- },
- [26] = {
- .start = EXYNOS4_PA_SYSMMU_TV,
- .end = EXYNOS4_PA_SYSMMU_TV + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [27] = {
- .start = IRQ_SYSMMU_TV_M0_0,
- .end = IRQ_SYSMMU_TV_M0_0,
- .flags = IORESOURCE_IRQ,
- },
- [28] = {
- .start = EXYNOS4_PA_SYSMMU_MFC_L,
- .end = EXYNOS4_PA_SYSMMU_MFC_L + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [29] = {
- .start = IRQ_SYSMMU_MFC_M0_0,
- .end = IRQ_SYSMMU_MFC_M0_0,
- .flags = IORESOURCE_IRQ,
- },
- [30] = {
- .start = EXYNOS4_PA_SYSMMU_MFC_R,
- .end = EXYNOS4_PA_SYSMMU_MFC_R + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [31] = {
- .start = IRQ_SYSMMU_MFC_M1_0,
- .end = IRQ_SYSMMU_MFC_M1_0,
- .flags = IORESOURCE_IRQ,
- },
-};
-struct platform_device exynos4_device_sysmmu = {
- .name = "s5p-sysmmu",
- .id = 32,
- .num_resources = ARRAY_SIZE(exynos4_sysmmu_resource),
- .resource = exynos4_sysmmu_resource,
-};
-EXPORT_SYMBOL(exynos4_device_sysmmu);
-
-static struct clk *sysmmu_clk[S5P_SYSMMU_TOTAL_IPNUM];
-void sysmmu_clk_init(struct device *dev, sysmmu_ips ips)
-{
- sysmmu_clk[ips] = clk_get(dev, sysmmu_ips_name[ips]);
- if (IS_ERR(sysmmu_clk[ips]))
- sysmmu_clk[ips] = NULL;
- else
- clk_put(sysmmu_clk[ips]);
+#define SYSMMU_RESOURCE(ipname, base, irq) \
+static struct resource sysmmu_resource_##ipname[] =\
+{\
+ {\
+ .start = EXYNOS4_PA_SYSMMU_##base,\
+ .end = EXYNOS4_PA_SYSMMU_##base + SZ_4K - 1,\
+ .flags = IORESOURCE_MEM,\
+ }, {\
+ .start = IRQ_SYSMMU_##irq##_0,\
+ .end = IRQ_SYSMMU_##irq##_0,\
+ .flags = IORESOURCE_IRQ,\
+ },\
}
-void sysmmu_clk_enable(sysmmu_ips ips)
-{
- if (sysmmu_clk[ips])
- clk_enable(sysmmu_clk[ips]);
+#define SYSMMU_PLATFORM_DEVICE(ipname, devid) \
+struct platform_device SYSMMU_PLATDEV(ipname) =\
+{\
+ .name = SYSMMU_DEVNAME_BASE,\
+ .id = devid,\
+ .num_resources = ARRAY_SIZE(sysmmu_resource_##ipname),\
+ .resource = sysmmu_resource_##ipname,\
+ .dev = {\
+ .dma_mask = &exynos_sysmmu_dma_mask,\
+ .coherent_dma_mask = DMA_BIT_MASK(32),\
+ },\
}
-void sysmmu_clk_disable(sysmmu_ips ips)
-{
- if (sysmmu_clk[ips])
- clk_disable(sysmmu_clk[ips]);
-}
+static u64 exynos_sysmmu_dma_mask = DMA_BIT_MASK(32);
+
+SYSMMU_RESOURCE(sss, SSS, SSS);
+SYSMMU_RESOURCE(fimc0, FIMC0, FIMC0);
+SYSMMU_RESOURCE(fimc1, FIMC1, FIMC1);
+SYSMMU_RESOURCE(fimc2, FIMC2, FIMC2);
+SYSMMU_RESOURCE(fimc3, FIMC3, FIMC3);
+SYSMMU_RESOURCE(jpeg, JPEG, JPEG);
+SYSMMU_RESOURCE(fimd0, FIMD0, LCD0_M0);
+SYSMMU_RESOURCE(fimd1, FIMD1, LCD1_M1);
+SYSMMU_RESOURCE(pcie, PCIe, PCIE);
+SYSMMU_RESOURCE(g2d, G2D, 2D);
+SYSMMU_RESOURCE(rot, ROTATOR, ROTATOR);
+SYSMMU_RESOURCE(mdma, MDMA2, MDMA1);
+SYSMMU_RESOURCE(tv, TV, TV_M0);
+SYSMMU_RESOURCE(mfc_l, MFC_L, MFC_M0);
+SYSMMU_RESOURCE(mfc_r, MFC_R, MFC_M1);
+
+SYSMMU_PLATFORM_DEVICE(sss, 0);
+SYSMMU_PLATFORM_DEVICE(fimc0, 1);
+SYSMMU_PLATFORM_DEVICE(fimc1, 2);
+SYSMMU_PLATFORM_DEVICE(fimc2, 3);
+SYSMMU_PLATFORM_DEVICE(fimc3, 4);
+SYSMMU_PLATFORM_DEVICE(jpeg, 5);
+SYSMMU_PLATFORM_DEVICE(fimd0, 6);
+SYSMMU_PLATFORM_DEVICE(fimd1, 7);
+SYSMMU_PLATFORM_DEVICE(pcie, 8);
+SYSMMU_PLATFORM_DEVICE(g2d, 9);
+SYSMMU_PLATFORM_DEVICE(rot, 10);
+SYSMMU_PLATFORM_DEVICE(mdma, 11);
+SYSMMU_PLATFORM_DEVICE(tv, 12);
+SYSMMU_PLATFORM_DEVICE(mfc_l, 13);
+SYSMMU_PLATFORM_DEVICE(mfc_r, 14);
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h
index 62093b9..9eeb9a6 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos4/include/mach/irqs.h
@@ -123,7 +123,6 @@
#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128))
#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
-#define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0)
#define IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1)
#define IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2)
#define IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3)
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index 1bea7d1..114d8b8 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -72,7 +72,6 @@
#define EXYNOS4_PA_PDMA0 0x12680000
#define EXYNOS4_PA_PDMA1 0x12690000
-#define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000
#define EXYNOS4_PA_SYSMMU_SSS 0x10A50000
#define EXYNOS4_PA_SYSMMU_FIMC0 0x11A20000
#define EXYNOS4_PA_SYSMMU_FIMC1 0x11A30000
diff --git a/arch/arm/mach-exynos4/include/mach/sysmmu.h b/arch/arm/mach-exynos4/include/mach/sysmmu.h
index 6a5fbb5..1811c20 100644
--- a/arch/arm/mach-exynos4/include/mach/sysmmu.h
+++ b/arch/arm/mach-exynos4/include/mach/sysmmu.h
@@ -3,44 +3,59 @@
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Samsung sysmmu driver for EXYNOS4
+ * Exynos - System MMU Support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARM_ARCH_SYSMMU_H
-#define __ASM_ARM_ARCH_SYSMMU_H __FILE__
-
-enum exynos4_sysmmu_ips {
- SYSMMU_MDMA,
- SYSMMU_SSS,
- SYSMMU_FIMC0,
- SYSMMU_FIMC1,
- SYSMMU_FIMC2,
- SYSMMU_FIMC3,
- SYSMMU_JPEG,
- SYSMMU_FIMD0,
- SYSMMU_FIMD1,
- SYSMMU_PCIe,
- SYSMMU_G2D,
- SYSMMU_ROTATOR,
- SYSMMU_MDMA2,
- SYSMMU_TV,
- SYSMMU_MFC_L,
- SYSMMU_MFC_R,
- EXYNOS4_SYSMMU_TOTAL_IPNUM,
-};
-
-#define S5P_SYSMMU_TOTAL_IPNUM EXYNOS4_SYSMMU_TOTAL_IPNUM
-
-extern const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM];
-
-typedef enum exynos4_sysmmu_ips sysmmu_ips;
-
-void sysmmu_clk_init(struct device *dev, sysmmu_ips ips);
-void sysmmu_clk_enable(sysmmu_ips ips);
-void sysmmu_clk_disable(sysmmu_ips ips);
-
-#endif /* __ASM_ARM_ARCH_SYSMMU_H */
+#ifndef _ARM_MACH_EXYNOS_SYSMMU_H_
+#define _ARM_MACH_EXYNOS_SYSMMU_H_
+
+#include <linux/device.h>
+
+#define SYSMMU_DEVNAME_BASE "s5p-sysmmu"
+#define SYSMMU_CLOCK_NAME(ipname, id) SYSMMU_DEVNAME_BASE "." #id
+
+#ifdef CONFIG_EXYNOS4_DEV_SYSMMU
+
+#define SYSMMU_PLATDEV(ipname) exynos_device_sysmmu_##ipname
+
+#ifdef CONFIG_EXYNOS4_DEV_PD
+#define ASSIGN_SYSMMU_POWERDOMAIN(ipname, powerdomain) \
+ SYSMMU_PLATDEV(mfc_l).dev.parent = powerdomain
+#else
+#define ASSIGN_SYSMMU_POWERDOMAIN(ipname, powerdomain) do { } while (0)
+#endif
+
+extern struct platform_device SYSMMU_PLATDEV(sss);
+extern struct platform_device SYSMMU_PLATDEV(fimc0);
+extern struct platform_device SYSMMU_PLATDEV(fimc1);
+extern struct platform_device SYSMMU_PLATDEV(fimc2);
+extern struct platform_device SYSMMU_PLATDEV(fimc3);
+extern struct platform_device SYSMMU_PLATDEV(jpeg);
+extern struct platform_device SYSMMU_PLATDEV(fimd0);
+extern struct platform_device SYSMMU_PLATDEV(fimd1);
+extern struct platform_device SYSMMU_PLATDEV(pcie);
+extern struct platform_device SYSMMU_PLATDEV(g2d);
+extern struct platform_device SYSMMU_PLATDEV(rot);
+extern struct platform_device SYSMMU_PLATDEV(mdma);
+extern struct platform_device SYSMMU_PLATDEV(tv);
+extern struct platform_device SYSMMU_PLATDEV(mfc_l);
+extern struct platform_device SYSMMU_PLATDEV(mfc_r);
+extern struct platform_device SYSMMU_PLATDEV(g2d_acp);
+
+static inline void sysmmu_set_owner(struct device *sysmmu, struct device *owner)
+{
+ sysmmu->platform_data = owner;
+}
+
+#else /* CONFIG_EXYNOS4_DEV_SYSMMU */
+
+#define sysmmu_set_owner(sysmmu, owner) do { } while (0)
+#define ASSIGN_SYSMMU_POWERDOMAIN(ipname, powerdomain) do { } while (0)
+
+#endif /* CONFIG_EXYNOS4_DEV_SYSMMU */
+
+#endif /* _ARM_MACH_EXYNOS_SYSMMU_H_ */
diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos4/mach-armlex4210.c
index b482c62..d7d2ff5 100644
--- a/arch/arm/mach-exynos4/mach-armlex4210.c
+++ b/arch/arm/mach-exynos4/mach-armlex4210.c
@@ -155,7 +155,23 @@ static struct platform_device *armlex4210_devices[] __initdata = {
&s3c_device_hsmmc3,
&s3c_device_rtc,
&s3c_device_wdt,
- &exynos4_device_sysmmu,
+#ifdef CONFIG_EXYNOS4_DEV_SYSMMU
+ &SYSMMU_PLATDEV(sss),
+ &SYSMMU_PLATDEV(fimc0),
+ &SYSMMU_PLATDEV(fimc1),
+ &SYSMMU_PLATDEV(fimc2),
+ &SYSMMU_PLATDEV(fimc3),
+ &SYSMMU_PLATDEV(jpeg),
+ &SYSMMU_PLATDEV(fimd0),
+ &SYSMMU_PLATDEV(fimd1),
+ &SYSMMU_PLATDEV(pcie),
+ &SYSMMU_PLATDEV(g2d),
+ &SYSMMU_PLATDEV(rot),
+ &SYSMMU_PLATDEV(mdma),
+ &SYSMMU_PLATDEV(tv),
+ &SYSMMU_PLATDEV(mfc_l),
+ &SYSMMU_PLATDEV(mfc_r),
+#endif
&samsung_asoc_dma,
&armlex4210_smsc911x,
&exynos4_device_ahci,
@@ -193,6 +209,10 @@ static void __init armlex4210_map_io(void)
ARRAY_SIZE(armlex4210_uartcfgs));
}
+static void __init sysmmu_init(void)
+{
+}
+
static void __init armlex4210_machine_init(void)
{
armlex4210_smsc911x_init();
@@ -201,6 +221,8 @@ static void __init armlex4210_machine_init(void)
armlex4210_wlan_init();
+ sysmmu_init();
+
platform_add_devices(armlex4210_devices,
ARRAY_SIZE(armlex4210_devices));
}
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index 57cf632..92b7ccd 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -40,6 +40,7 @@
#include <plat/mfc.h>
#include <mach/map.h>
+#include <mach/sysmmu.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -255,7 +256,23 @@ static struct platform_device *smdkv310_devices[] __initdata = {
&exynos4_device_pd[PD_TV],
&exynos4_device_pd[PD_GPS],
&exynos4_device_spdif,
- &exynos4_device_sysmmu,
+#ifdef CONFIG_S5P_SYSTEM_MMU
+ &SYSMMU_PLATDEV(sss),
+ &SYSMMU_PLATDEV(fimc0),
+ &SYSMMU_PLATDEV(fimc1),
+ &SYSMMU_PLATDEV(fimc2),
+ &SYSMMU_PLATDEV(fimc3),
+ &SYSMMU_PLATDEV(jpeg),
+ &SYSMMU_PLATDEV(fimd0),
+ &SYSMMU_PLATDEV(fimd1),
+ &SYSMMU_PLATDEV(pcie),
+ &SYSMMU_PLATDEV(g2d),
+ &SYSMMU_PLATDEV(rot),
+ &SYSMMU_PLATDEV(mdma),
+ &SYSMMU_PLATDEV(tv),
+ &SYSMMU_PLATDEV(mfc_l),
+ &SYSMMU_PLATDEV(mfc_r),
+#endif
&samsung_asoc_dma,
&samsung_asoc_idma,
&s5p_device_fimd0,
@@ -310,6 +327,13 @@ static void __init smdkv310_reserve(void)
s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
}
+static void __init sysmmu_init(void)
+{
+ ASSIGN_SYSMMU_POWERDOMAIN(mfc, &exynos4_device_pd[PD_MFC].dev);
+ sysmmu_set_owner(&SYSMMU_PLATDEV(mfc_l).dev, &s5p_device_mfc.dev);
+ sysmmu_set_owner(&SYSMMU_PLATDEV(mfc_r).dev, &s5p_device_mfc.dev);
+}
+
static void __init smdkv310_machine_init(void)
{
s3c_i2c1_set_platdata(NULL);
@@ -327,6 +351,8 @@ static void __init smdkv310_machine_init(void)
samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
+ sysmmu_init();
+
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
}
--
1.7.1
^ permalink raw reply related
* [PATCH 2/4 v2] ARM: S5P: Remove system MMU driver from arm/plat-s5p
From: KyongHo Cho @ 2011-09-26 4:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1317012170-28597-1-git-send-email-pullip.cho@samsung.com>
Due to Ohad Ben-Cohen gathered IOMMU drivers in drivers/iommu directory,
System MMU driver is moved to drivers/iommu directory and removed
from arch/arm/plat-s5p directory.
Please see
https://lkml.org/lkml/2011/6/8/69
Signed-off-by: KyongHo Cho <pullip.cho@samsung.com>
---
arch/arm/plat-s5p/Kconfig | 8 -
arch/arm/plat-s5p/Makefile | 1 -
arch/arm/plat-s5p/include/plat/sysmmu.h | 95 ----------
arch/arm/plat-s5p/sysmmu.c | 312 -------------------------------
4 files changed, 0 insertions(+), 416 deletions(-)
delete mode 100644 arch/arm/plat-s5p/include/plat/sysmmu.h
delete mode 100644 arch/arm/plat-s5p/sysmmu.c
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index f9241a7..05ee709 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -40,14 +40,6 @@ config S5P_HRT
help
Use the High Resolution timer support
-comment "System MMU"
-
-config S5P_SYSTEM_MMU
- bool "S5P SYSTEM MMU"
- depends on ARCH_EXYNOS4
- help
- Say Y here if you want to enable System MMU
-
config S5P_DEV_FIMC0
bool
help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 1812019..afa0718 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -19,7 +19,6 @@ obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o
-obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_S5P_HRT) += s5p-time.o
diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-s5p/include/plat/sysmmu.h
deleted file mode 100644
index bf5283c..0000000
--- a/arch/arm/plat-s5p/include/plat/sysmmu.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Samsung System MMU driver for S5P platform
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM__PLAT_SYSMMU_H
-#define __ASM__PLAT_SYSMMU_H __FILE__
-
-enum S5P_SYSMMU_INTERRUPT_TYPE {
- SYSMMU_PAGEFAULT,
- SYSMMU_AR_MULTIHIT,
- SYSMMU_AW_MULTIHIT,
- SYSMMU_BUSERROR,
- SYSMMU_AR_SECURITY,
- SYSMMU_AR_ACCESS,
- SYSMMU_AW_SECURITY,
- SYSMMU_AW_PROTECTION, /* 7 */
- SYSMMU_FAULTS_NUM
-};
-
-#ifdef CONFIG_S5P_SYSTEM_MMU
-
-#include <mach/sysmmu.h>
-
-/**
- * s5p_sysmmu_enable() - enable system mmu of ip
- * @ips: The ip connected system mmu.
- * #pgd: Base physical address of the 1st level page table
- *
- * This function enable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_disable() - disable sysmmu mmu of ip
- * @ips: The ip connected system mmu.
- *
- * This function disable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_disable(sysmmu_ips ips);
-
-/**
- * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table
- * @ips: The ip connected system mmu.
- * @pgd: The page table base address.
- *
- * This function set page table base address
- * When system mmu transfer address from virtaul address to physical address,
- * system mmu refer address information from page table
- */
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu
- * @ips: The ip connected system mmu.
- *
- * This function flush all TLB entry in system mmu
- */
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips);
-
-/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs
- * @itype: type of fault.
- * @pgtable_base: the physical address of page table base. This is 0 if @ips is
- * SYSMMU_BUSERROR.
- * @fault_addr: the device (virtual) address that the System MMU tried to
- * translated. This is 0 if @ips is SYSMMU_BUSERROR.
- * Called when interrupt occurred by the System MMUs
- * The device drivers of peripheral devices that has a System MMU can implement
- * a fault handler to resolve address translation fault by System MMU.
- * The meanings of return value and parameters are described below.
-
- * return value: non-zero if the fault is correctly resolved.
- * zero if the fault is not handled.
- */
-void s5p_sysmmu_set_fault_handler(sysmmu_ips ips,
- int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
- unsigned long pgtable_base,
- unsigned long fault_addr));
-#else
-#define s5p_sysmmu_enable(ips, pgd) do { } while (0)
-#define s5p_sysmmu_disable(ips) do { } while (0)
-#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0)
-#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0)
-#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0)
-#endif
-#endif /* __ASM_PLAT_SYSMMU_H */
diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c
deleted file mode 100644
index e1cbc72..0000000
--- a/arch/arm/plat-s5p/sysmmu.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/* linux/arch/arm/plat-s5p/sysmmu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <asm/pgtable.h>
-
-#include <mach/map.h>
-#include <mach/regs-sysmmu.h>
-#include <plat/sysmmu.h>
-
-#define CTRL_ENABLE 0x5
-#define CTRL_BLOCK 0x7
-#define CTRL_DISABLE 0x0
-
-static struct device *dev;
-
-static unsigned short fault_reg_offset[SYSMMU_FAULTS_NUM] = {
- S5P_PAGE_FAULT_ADDR,
- S5P_AR_FAULT_ADDR,
- S5P_AW_FAULT_ADDR,
- S5P_DEFAULT_SLAVE_ADDR,
- S5P_AR_FAULT_ADDR,
- S5P_AR_FAULT_ADDR,
- S5P_AW_FAULT_ADDR,
- S5P_AW_FAULT_ADDR
-};
-
-static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = {
- "PAGE FAULT",
- "AR MULTI-HIT FAULT",
- "AW MULTI-HIT FAULT",
- "BUS ERROR",
- "AR SECURITY PROTECTION FAULT",
- "AR ACCESS PROTECTION FAULT",
- "AW SECURITY PROTECTION FAULT",
- "AW ACCESS PROTECTION FAULT"
-};
-
-static int (*fault_handlers[S5P_SYSMMU_TOTAL_IPNUM])(
- enum S5P_SYSMMU_INTERRUPT_TYPE itype,
- unsigned long pgtable_base,
- unsigned long fault_addr);
-
-/*
- * If adjacent 2 bits are true, the system MMU is enabled.
- * The system MMU is disabled, otherwise.
- */
-static unsigned long sysmmu_states;
-
-static inline void set_sysmmu_active(sysmmu_ips ips)
-{
- sysmmu_states |= 3 << (ips * 2);
-}
-
-static inline void set_sysmmu_inactive(sysmmu_ips ips)
-{
- sysmmu_states &= ~(3 << (ips * 2));
-}
-
-static inline int is_sysmmu_active(sysmmu_ips ips)
-{
- return sysmmu_states & (3 << (ips * 2));
-}
-
-static void __iomem *sysmmusfrs[S5P_SYSMMU_TOTAL_IPNUM];
-
-static inline void sysmmu_block(sysmmu_ips ips)
-{
- __raw_writel(CTRL_BLOCK, sysmmusfrs[ips] + S5P_MMU_CTRL);
- dev_dbg(dev, "%s is blocked.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void sysmmu_unblock(sysmmu_ips ips)
-{
- __raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
- dev_dbg(dev, "%s is unblocked.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void __sysmmu_tlb_invalidate(sysmmu_ips ips)
-{
- __raw_writel(0x1, sysmmusfrs[ips] + S5P_MMU_FLUSH);
- dev_dbg(dev, "TLB of %s is invalidated.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void __sysmmu_set_ptbase(sysmmu_ips ips, unsigned long pgd)
-{
- if (unlikely(pgd == 0)) {
- pgd = (unsigned long)ZERO_PAGE(0);
- __raw_writel(0x20, sysmmusfrs[ips] + S5P_MMU_CFG); /* 4KB LV1 */
- } else {
- __raw_writel(0x0, sysmmusfrs[ips] + S5P_MMU_CFG); /* 16KB LV1 */
- }
-
- __raw_writel(pgd, sysmmusfrs[ips] + S5P_PT_BASE_ADDR);
-
- dev_dbg(dev, "Page table base of %s is initialized with 0x%08lX.\n",
- sysmmu_ips_name[ips], pgd);
- __sysmmu_tlb_invalidate(ips);
-}
-
-void sysmmu_set_fault_handler(sysmmu_ips ips,
- int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
- unsigned long pgtable_base,
- unsigned long fault_addr))
-{
- BUG_ON(!((ips >= SYSMMU_MDMA) && (ips < S5P_SYSMMU_TOTAL_IPNUM)));
- fault_handlers[ips] = handler;
-}
-
-static irqreturn_t s5p_sysmmu_irq(int irq, void *dev_id)
-{
- /* SYSMMU is in blocked when interrupt occurred. */
- unsigned long base = 0;
- sysmmu_ips ips = (sysmmu_ips)dev_id;
- enum S5P_SYSMMU_INTERRUPT_TYPE itype;
-
- itype = (enum S5P_SYSMMU_INTERRUPT_TYPE)
- __ffs(__raw_readl(sysmmusfrs[ips] + S5P_INT_STATUS));
-
- BUG_ON(!((itype >= 0) && (itype < 8)));
-
- dev_alert(dev, "%s occurred by %s.\n", sysmmu_fault_name[itype],
- sysmmu_ips_name[ips]);
-
- if (fault_handlers[ips]) {
- unsigned long addr;
-
- base = __raw_readl(sysmmusfrs[ips] + S5P_PT_BASE_ADDR);
- addr = __raw_readl(sysmmusfrs[ips] + fault_reg_offset[itype]);
-
- if (fault_handlers[ips](itype, base, addr)) {
- __raw_writel(1 << itype,
- sysmmusfrs[ips] + S5P_INT_CLEAR);
- dev_notice(dev, "%s from %s is resolved."
- " Retrying translation.\n",
- sysmmu_fault_name[itype], sysmmu_ips_name[ips]);
- } else {
- base = 0;
- }
- }
-
- sysmmu_unblock(ips);
-
- if (!base)
- dev_notice(dev, "%s from %s is not handled.\n",
- sysmmu_fault_name[itype], sysmmu_ips_name[ips]);
-
- return IRQ_HANDLED;
-}
-
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd)
-{
- if (is_sysmmu_active(ips)) {
- sysmmu_block(ips);
- __sysmmu_set_ptbase(ips, pgd);
- sysmmu_unblock(ips);
- } else {
- dev_dbg(dev, "%s is disabled. "
- "Skipping initializing page table base.\n",
- sysmmu_ips_name[ips]);
- }
-}
-
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd)
-{
- if (!is_sysmmu_active(ips)) {
- sysmmu_clk_enable(ips);
-
- __sysmmu_set_ptbase(ips, pgd);
-
- __raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
-
- set_sysmmu_active(ips);
- dev_dbg(dev, "%s is enabled.\n", sysmmu_ips_name[ips]);
- } else {
- dev_dbg(dev, "%s is already enabled.\n", sysmmu_ips_name[ips]);
- }
-}
-
-void s5p_sysmmu_disable(sysmmu_ips ips)
-{
- if (is_sysmmu_active(ips)) {
- __raw_writel(CTRL_DISABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
- set_sysmmu_inactive(ips);
- sysmmu_clk_disable(ips);
- dev_dbg(dev, "%s is disabled.\n", sysmmu_ips_name[ips]);
- } else {
- dev_dbg(dev, "%s is already disabled.\n", sysmmu_ips_name[ips]);
- }
-}
-
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips)
-{
- if (is_sysmmu_active(ips)) {
- sysmmu_block(ips);
- __sysmmu_tlb_invalidate(ips);
- sysmmu_unblock(ips);
- } else {
- dev_dbg(dev, "%s is disabled. "
- "Skipping invalidating TLB.\n", sysmmu_ips_name[ips]);
- }
-}
-
-static int s5p_sysmmu_probe(struct platform_device *pdev)
-{
- int i, ret;
- struct resource *res, *mem;
-
- dev = &pdev->dev;
-
- for (i = 0; i < S5P_SYSMMU_TOTAL_IPNUM; i++) {
- int irq;
-
- sysmmu_clk_init(dev, i);
- sysmmu_clk_disable(i);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
- if (!res) {
- dev_err(dev, "Failed to get the resource of %s.\n",
- sysmmu_ips_name[i]);
- ret = -ENODEV;
- goto err_res;
- }
-
- mem = request_mem_region(res->start, resource_size(res),
- pdev->name);
- if (!mem) {
- dev_err(dev, "Failed to request the memory region of %s.\n",
- sysmmu_ips_name[i]);
- ret = -EBUSY;
- goto err_res;
- }
-
- sysmmusfrs[i] = ioremap(res->start, resource_size(res));
- if (!sysmmusfrs[i]) {
- dev_err(dev, "Failed to ioremap() for %s.\n",
- sysmmu_ips_name[i]);
- ret = -ENXIO;
- goto err_reg;
- }
-
- irq = platform_get_irq(pdev, i);
- if (irq <= 0) {
- dev_err(dev, "Failed to get the IRQ resource of %s.\n",
- sysmmu_ips_name[i]);
- ret = -ENOENT;
- goto err_map;
- }
-
- if (request_irq(irq, s5p_sysmmu_irq, IRQF_DISABLED,
- pdev->name, (void *)i)) {
- dev_err(dev, "Failed to request IRQ for %s.\n",
- sysmmu_ips_name[i]);
- ret = -ENOENT;
- goto err_map;
- }
- }
-
- return 0;
-
-err_map:
- iounmap(sysmmusfrs[i]);
-err_reg:
- release_mem_region(mem->start, resource_size(mem));
-err_res:
- return ret;
-}
-
-static int s5p_sysmmu_remove(struct platform_device *pdev)
-{
- return 0;
-}
-int s5p_sysmmu_runtime_suspend(struct device *dev)
-{
- return 0;
-}
-
-int s5p_sysmmu_runtime_resume(struct device *dev)
-{
- return 0;
-}
-
-const struct dev_pm_ops s5p_sysmmu_pm_ops = {
- .runtime_suspend = s5p_sysmmu_runtime_suspend,
- .runtime_resume = s5p_sysmmu_runtime_resume,
-};
-
-static struct platform_driver s5p_sysmmu_driver = {
- .probe = s5p_sysmmu_probe,
- .remove = s5p_sysmmu_remove,
- .driver = {
- .owner = THIS_MODULE,
- .name = "s5p-sysmmu",
- .pm = &s5p_sysmmu_pm_ops,
- }
-};
-
-static int __init s5p_sysmmu_init(void)
-{
- return platform_driver_register(&s5p_sysmmu_driver);
-}
-arch_initcall(s5p_sysmmu_init);
--
1.7.1
^ permalink raw reply related
* [PATCH 3/4 v2] iommu/exynos: Add iommu driver for Exynos4 Platforms
From: KyongHo Cho @ 2011-09-26 4:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1317012170-28597-1-git-send-email-pullip.cho@samsung.com>
This is the System MMU driver and IOMMU API implementation for
Exynos4 SOC platforms. Exynos4 platforms has more than 10 System
MMUs dedicated for each multimedia accellerators.
Signed-off-by: KyongHo Cho <pullip.cho@samsung.com>
---
drivers/iommu/Kconfig | 14 +
drivers/iommu/Makefile | 1 +
drivers/iommu/exynos_iommu.c | 933 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 948 insertions(+), 0 deletions(-)
create mode 100644 drivers/iommu/exynos_iommu.c
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index b57b3fa..1c754cd 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -107,4 +107,18 @@ config INTR_REMAP
To use x2apic mode in the CPU's which support x2APIC enhancements or
to support platforms with CPU's having > 8 bit APIC ID, say Y.
+# EXYNOS IOMMU support
+config EXYNOS_IOMMU
+ bool "Exynos IOMMU Support"
+ depends on ARCH_EXYNOS4
+ select IOMMU_API
+ select EXYNOS4_DEV_SYSMMU
+ help
+ Support for the IOMMUs (System MMUs) Samsung Exynos application
+ processor family. This enables H/W multimedia accellerators to view
+ non-linear physical memory chunks as a linear memory in their virtual
+ address spaces.
+
+ If unsure, say N here.
+
endif # IOMMU_SUPPORT
diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
index 4d4d77d..1eb924f 100644
--- a/drivers/iommu/Makefile
+++ b/drivers/iommu/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_MSM_IOMMU) += msm_iommu.o msm_iommu_dev.o
obj-$(CONFIG_AMD_IOMMU) += amd_iommu.o amd_iommu_init.o
obj-$(CONFIG_DMAR) += dmar.o iova.o intel-iommu.o
obj-$(CONFIG_INTR_REMAP) += dmar.o intr_remapping.o
+obj-$(CONFIG_EXYNOS_IOMMU) += exynos_iommu.o
diff --git a/drivers/iommu/exynos_iommu.c b/drivers/iommu/exynos_iommu.c
new file mode 100644
index 0000000..9b3f108
--- /dev/null
+++ b/drivers/iommu/exynos_iommu.c
@@ -0,0 +1,933 @@
+/* linux/drivers/iommu/exynos_iommu.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/iommu.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/list.h>
+#include <linux/atomic.h>
+
+#include <asm/cacheflush.h>
+#include <asm/pgtable.h>
+
+#include <mach/map.h>
+#include <mach/regs-sysmmu.h>
+#include <mach/sysmmu.h>
+
+#define CTRL_ENABLE 0x5
+#define CTRL_BLOCK 0x7
+#define CTRL_DISABLE 0x0
+
+enum S5P_SYSMMU_INTERRUPT_TYPE {
+ SYSMMU_PAGEFAULT,
+ SYSMMU_AR_MULTIHIT,
+ SYSMMU_AW_MULTIHIT,
+ SYSMMU_BUSERROR,
+ SYSMMU_AR_SECURITY,
+ SYSMMU_AR_ACCESS,
+ SYSMMU_AW_SECURITY,
+ SYSMMU_AW_PROTECTION, /* 7 */
+ SYSMMU_FAULTS_NUM
+};
+
+static unsigned short fault_reg_offset[SYSMMU_FAULTS_NUM] = {
+ S5P_PAGE_FAULT_ADDR,
+ S5P_AR_FAULT_ADDR,
+ S5P_AW_FAULT_ADDR,
+ S5P_DEFAULT_SLAVE_ADDR,
+ S5P_AR_FAULT_ADDR,
+ S5P_AR_FAULT_ADDR,
+ S5P_AW_FAULT_ADDR,
+ S5P_AW_FAULT_ADDR
+};
+
+static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM + 1] = {
+ "PAGE FAULT",
+ "AR MULTI-HIT FAULT",
+ "AW MULTI-HIT FAULT",
+ "BUS ERROR",
+ "AR SECURITY PROTECTION FAULT",
+ "AR ACCESS PROTECTION FAULT",
+ "AW SECURITY PROTECTION FAULT",
+ "AW ACCESS PROTECTION FAULT",
+ "IOMMU FAULT"
+};
+
+struct exynos_iommu_domain {
+ struct device *dev;
+ unsigned long *pgtable;
+ spinlock_t lock;
+ spinlock_t pgtablelock;
+};
+
+struct sysmmu_drvdata {
+ struct list_head node;
+ struct device *dev;
+ struct device *owner;
+ void __iomem *sfrbase;
+ struct clk *clk;
+ int activations;
+ struct iommu_domain *domain;
+ int (*fault_handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
+ unsigned long pgtable_base,
+ unsigned long fault_addr);
+};
+
+/* List of sysmmu_drvdata */
+static LIST_HEAD(sysmmu_list);
+
+static inline struct sysmmu_drvdata *get_sysmmu_data(struct device *owner,
+ struct sysmmu_drvdata *start)
+{
+ struct list_head *pos, *head;
+
+ head = (start) ? &start->node : &sysmmu_list;
+
+ list_for_each(pos, head) {
+ struct sysmmu_drvdata *data =
+ container_of(pos, struct sysmmu_drvdata, node);
+
+ if (pos == &sysmmu_list)
+ return NULL;
+
+ if (data->owner == owner)
+ return data;
+ }
+
+ return NULL;
+}
+
+static inline bool set_sysmmu_active(struct sysmmu_drvdata *data)
+{
+ /* return true if the System MMU was not active previously
+ and it needs to be initialized */
+
+ data->activations++;
+ return data->activations == 1;
+}
+
+static inline bool set_sysmmu_inactive(struct sysmmu_drvdata *data)
+{
+ /* return true if the System MMU is needed to be disabled */
+ data->activations--;
+
+ if (data->activations == 0)
+ return true;
+
+ if (WARN_ON(data->activations < 0))
+ /* System MMU is already disabled */
+ data->activations = 0;
+
+ return false;
+}
+
+static inline bool is_sysmmu_active(struct sysmmu_drvdata *data)
+{
+ return data->activations != 0;
+}
+
+static inline void sysmmu_block(void __iomem *sfrbase)
+{
+ __raw_writel(CTRL_BLOCK, sfrbase + S5P_MMU_CTRL);
+}
+
+static inline void sysmmu_unblock(void __iomem *sfrbase)
+{
+ __raw_writel(CTRL_ENABLE, sfrbase + S5P_MMU_CTRL);
+}
+
+static inline void __sysmmu_tlb_invalidate(void __iomem *sfrbase)
+{
+ __raw_writel(0x1, sfrbase + S5P_MMU_FLUSH);
+}
+
+static inline void __sysmmu_set_ptbase(void __iomem *sfrbase,
+ unsigned long pgd)
+{
+ if (unlikely(pgd == 0)) {
+ pgd = (unsigned long)ZERO_PAGE(0);
+ __raw_writel(0x20, sfrbase + S5P_MMU_CFG); /* 4KB LV1 */
+ } else {
+ __raw_writel(0x0, sfrbase + S5P_MMU_CFG); /* 16KB LV1 */
+ }
+
+ __raw_writel(pgd, sfrbase + S5P_PT_BASE_ADDR);
+
+ __sysmmu_tlb_invalidate(sfrbase);
+}
+
+static inline void __set_fault_handler(struct sysmmu_drvdata *data,
+ int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
+ unsigned long pgtable_base,
+ unsigned long fault_addr))
+{
+ data->fault_handler = handler;
+}
+
+void s5p_sysmmu_set_fault_handler(struct device *owner,
+ int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
+ unsigned long pgtable_base,
+ unsigned long fault_addr))
+{
+ struct sysmmu_drvdata *data = NULL;
+
+ while ((data = get_sysmmu_data(owner, data)))
+ __set_fault_handler(data, handler);
+}
+
+static int default_fault_handler(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
+ unsigned long pgtable_base, unsigned long fault_addr)
+{
+ if ((itype > SYSMMU_FAULTS_NUM) || (itype < SYSMMU_PAGEFAULT))
+ itype = SYSMMU_FAULTS_NUM;
+
+ pr_err("%s occured@0x%08lx(Page table base: 0x%08lx)\n",
+ sysmmu_fault_name[itype], fault_addr, pgtable_base);
+ pr_err("\t\tGenerating Kernel OOPS... because it is unrecoverable.\n");
+
+ BUG();
+
+ return 0;
+}
+
+static irqreturn_t exynos_sysmmu_irq(int irq, void * dev_id)
+{
+ /* SYSMMU is in blocked when interrupt occurred. */
+ unsigned long addr;
+ struct sysmmu_drvdata *data = dev_id;
+ enum S5P_SYSMMU_INTERRUPT_TYPE itype;
+ bool handled = false;
+
+ WARN_ON(!is_sysmmu_active(data));
+
+ itype = (enum S5P_SYSMMU_INTERRUPT_TYPE)
+ __ffs(__raw_readl(data->sfrbase + S5P_INT_STATUS));
+
+ BUG_ON(!((itype >= 0) && (itype < 8)));
+
+ addr = __raw_readl(data->sfrbase + fault_reg_offset[itype]);
+
+ if (data->domain) {
+ if (!report_iommu_fault(data->domain, data->owner, addr, itype))
+ handled = true;
+ } else if (data->fault_handler) {
+ unsigned long base = 0;
+
+ base = __raw_readl(data->sfrbase + S5P_PT_BASE_ADDR);
+
+ if (!data->fault_handler(itype, base, addr))
+ handled = true;
+ }
+
+ if (handled) {
+ __raw_writel(1 << itype, data->sfrbase + S5P_INT_CLEAR);
+ sysmmu_unblock(data->sfrbase);
+ } else {
+ dev_dbg(data->dev, "%s is not handled.\n",
+ sysmmu_fault_name[itype]);
+ }
+
+ return IRQ_HANDLED;
+}
+
+void exynos_sysmmu_set_tablebase_pgd(struct device *owner, unsigned long pgd)
+{
+ struct sysmmu_drvdata *data = NULL;
+
+ while ((data = get_sysmmu_data(owner, data))) {
+ if (is_sysmmu_active(data)) {
+ sysmmu_block(data->sfrbase);
+ __sysmmu_set_ptbase(data->sfrbase, pgd);
+ sysmmu_unblock(data->sfrbase);
+ dev_dbg(data->dev,
+ "New page table base is 0x%08lx\n", pgd);
+ } else {
+ dev_dbg(data->dev,
+ "Disabled: Skipping setting page table base.\n");
+ }
+ }
+}
+
+static int __exynos_sysmmu_enable(struct device *owner, unsigned long pgtable,
+ struct iommu_domain *domain)
+{
+ struct sysmmu_drvdata *data = NULL;
+ bool enabled = false;
+
+ /* There are some devices that control more System MMUs than one such
+ * as MFC.
+ */
+ while ((data = get_sysmmu_data(owner, data))) {
+ enabled = true;
+
+ if (!set_sysmmu_active(data)) {
+ dev_dbg(data->dev, "Already enabled.\n");
+ continue;
+ }
+
+ pm_runtime_get_sync(data->dev);
+
+ clk_enable(data->clk);
+
+ __sysmmu_set_ptbase(data->sfrbase, pgtable);
+
+ __raw_writel(CTRL_ENABLE, data->sfrbase + S5P_MMU_CTRL);
+
+ data->domain = domain;
+
+ dev_dbg(data->dev, "Enabled.\n");
+ }
+
+ return (enabled) ? 0: -ENODEV;
+}
+
+inline static int exynos_iommu_enable(struct iommu_domain *domain)
+{
+ struct exynos_iommu_domain *priv = domain->priv;
+
+ if (!priv || !priv->dev)
+ return -EINVAL;
+
+ return __exynos_sysmmu_enable(priv->dev, __pa(priv->pgtable), domain);
+}
+
+int exynos_sysmmu_enable(struct device *owner, unsigned long pgtable)
+{
+ return __exynos_sysmmu_enable(owner, pgtable, NULL);
+}
+
+void exynos_sysmmu_disable(struct device *owner)
+{
+ struct sysmmu_drvdata *data = NULL;
+ bool disabled = false;
+
+ while ((data = get_sysmmu_data(owner, data))) {
+ disabled = true;
+
+ if (!set_sysmmu_inactive(data)) {
+ dev_dbg(data->dev, "Inactivation request ignorred\n");
+ continue;
+ }
+
+ __raw_writel(CTRL_DISABLE, data->sfrbase + S5P_MMU_CTRL);
+
+ clk_disable(data->clk);
+
+ pm_runtime_put_sync(data->dev);
+
+ data->domain = NULL;
+
+ dev_dbg(data->dev, "Disabled.\n");
+ }
+
+ BUG_ON(!disabled);
+}
+
+static inline void exynos_iommu_disable(struct iommu_domain *domain)
+{
+ struct exynos_iommu_domain *priv = domain->priv;
+
+ if (priv && priv->dev)
+ exynos_sysmmu_disable(priv->dev);
+}
+
+void exynos_sysmmu_tlb_invalidate(struct device *owner)
+{
+ struct sysmmu_drvdata *data = NULL;
+
+ while ((data = get_sysmmu_data(owner, data))) {
+ if (is_sysmmu_active(data)) {
+ sysmmu_block(data->sfrbase);
+ __sysmmu_tlb_invalidate(data->sfrbase);
+ sysmmu_unblock(data->sfrbase);
+ } else {
+ dev_dbg(data->dev,
+ "Disabled: Skipping invalidating TLB.\n");
+ }
+ }
+}
+
+static int exynos_sysmmu_probe(struct platform_device *pdev)
+{
+ struct resource *res, *ioarea;
+ int ret = 0;
+ int irq;
+ struct device *dev;
+ void *sfr;
+ struct sysmmu_drvdata *data;
+ struct clk *clk;
+
+ dev = &pdev->dev;
+
+ data = kzalloc(GFP_KERNEL, sizeof(*data));
+ if (!data) {
+ dev_err(dev, "Failed to probing System MMU: "
+ "Not enough memory");
+ return -ENOMEM;
+ }
+
+ if (!dev_get_platdata(dev)) {
+ dev_err(dev, "Failed to probing system MMU: "
+ "Owner device is not set.");
+
+ ret = -ENODEV;
+ goto err_init;
+ }
+
+ ret = dev_set_drvdata(dev, data);
+ if (ret) {
+ dev_err(dev, "Failed to probing system MMU: "
+ "Unable to set driver data.");
+ goto err_init;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev,
+ "Failed probing system MMU: failed to get resource.");
+ ret = -ENOENT;
+ goto err_init;
+ }
+
+ ioarea = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (ioarea == NULL) {
+ dev_err(dev, "Failed probing system MMU: "
+ "failed to request memory region.");
+ ret = -ENOENT;
+ goto err_init;
+ }
+
+ sfr = ioremap(res->start, resource_size(res));
+ if (!sfr) {
+ dev_err(dev, "Failed probing system MMU: "
+ "failed to call ioremap().");
+ ret = -ENOENT;
+ goto err_ioremap;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(dev, "Failed probing system MMU: "
+ "failed to get irq resource.");
+ ret = irq;
+ goto err_irq;
+ }
+
+ ret = request_irq(irq, exynos_sysmmu_irq, 0, dev_name(dev), data);
+ if (ret) {
+ dev_err(dev, "Failed probing system MMU: "
+ "failed to request irq.");
+ goto err_irq;
+ }
+
+ clk = clk_get(dev, "sysmmu");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "Failed to probing System MMU: "
+ "failed to get clock descriptor");
+ ret = PTR_ERR(clk);
+ goto err_clk;
+ }
+
+ data->dev = dev;
+ data->owner = dev_get_platdata(dev);
+ data->clk = clk;
+ data->sfrbase = sfr;
+ data->fault_handler = &default_fault_handler;
+ INIT_LIST_HEAD(&data->node);
+
+ list_add(&data->node, &sysmmu_list);
+
+ if (dev->parent)
+ pm_runtime_enable(dev);
+
+ dev_dbg(dev, "Initialized for %s.\n", dev_name(data->owner));
+ return 0;
+err_clk:
+ free_irq(irq, data);
+err_irq:
+ iounmap(sfr);
+err_ioremap:
+ release_resource(ioarea);
+ kfree(ioarea);
+err_init:
+ kfree(data);
+ dev_err(dev, "Probing system MMU failed.");
+ return ret;
+}
+
+int exynos_sysmmu_runtime_suspend(struct device *dev)
+{
+ if (WARN_ON(is_sysmmu_active(dev_get_drvdata(dev))))
+ return -EFAULT;
+
+ return 0;
+}
+
+int exynos_sysmmu_runtime_resume(struct device *dev)
+{
+ if (WARN_ON(is_sysmmu_active(dev_get_drvdata(dev))))
+ return -EFAULT;
+
+ return 0;
+}
+
+const struct dev_pm_ops exynos_sysmmu_pm_ops = {
+ .runtime_suspend = exynos_sysmmu_runtime_suspend,
+ .runtime_resume = exynos_sysmmu_runtime_resume,
+};
+
+static struct platform_driver exynos_sysmmu_driver = {
+ .probe = exynos_sysmmu_probe,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "s5p-sysmmu",
+ .pm = &exynos_sysmmu_pm_ops,
+ }
+};
+
+static int __init exynos_sysmmu_init(void)
+{
+ return platform_driver_register(&exynos_sysmmu_driver);
+}
+arch_initcall(exynos_sysmmu_init);
+
+/* We does not consider super section mapping (16MB) */
+#define S5P_SPAGE_SHIFT 12
+#define S5P_LPAGE_SHIFT 16
+#define S5P_SECTION_SHIFT 20
+
+#define S5P_SPAGE_SIZE (1 << S5P_SPAGE_SHIFT)
+#define S5P_LPAGE_SIZE (1 << S5P_LPAGE_SHIFT)
+#define S5P_SECTION_SIZE (1 << S5P_SECTION_SHIFT)
+
+#define S5P_SPAGE_MASK (~(S5P_SPAGE_SIZE - 1))
+#define S5P_LPAGE_MASK (~(S5P_LPAGE_SIZE - 1))
+#define S5P_SECTION_MASK (~(S5P_SECTION_SIZE - 1))
+
+#define S5P_SPAGE_ORDER (S5P_SPAGE_SHIFT - PAGE_SHIFT)
+#define S5P_LPAGE_ORDER (S5P_LPAGE_SHIFT - S5P_SPAGE_SHIFT)
+#define S5P_SECTION_ORDER (S5P_SECTION_SHIFT - S5P_SPAGE_SHIFT)
+
+#define S5P_LV1TABLE_ENTRIES (1 << (BITS_PER_LONG - S5P_SECTION_SHIFT))
+
+#define S5P_LV2TABLE_ENTRIES (1 << S5P_SECTION_ORDER)
+#define S5P_LV2TABLE_SIZE (S5P_LV2TABLE_ENTRIES * sizeof(long))
+#define S5P_LV2TABLE_MASK (~(S5P_LV2TABLE_SIZE - 1)) /* 0xFFFFFC00 */
+
+#define S5P_SECTION_LV1_ENTRY(entry) ((entry & 0x40003) == 2)
+#define S5P_SUPSECT_LV1_ENTRY(entry) ((entry & 0x40003) == 0x40002)
+#define S5P_PAGE_LV1_ENTRY(entry) ((entry & 3) == 1)
+#define S5P_FAULT_LV1_ENTRY(entry) (((entry & 3) == 0) || (entry & 3) == 3)
+
+#define S5P_LPAGE_LV2_ENTRY(entry) ((entry & 3) == 1)
+#define S5P_SPAGE_LV2_ENTRY(entry) ((entry & 2) == 2)
+#define S5P_FAULT_LV2_ENTRY(entry) ((entry & 3) == 0)
+
+#define MAKE_FAULT_ENTRY(entry) do { entry = 0; } while (0)
+#define MAKE_SECTION_ENTRY(entry, pa) do { entry = pa | 2; } while (0)
+#define MAKE_SUPSECT_ENTRY(entry, pa) do { entry = pa | 0x40002; } while (0)
+#define MAKE_LV2TABLE_ENTRY(entry, pa) do { entry = pa | 1; } while (0)
+
+#define MAKE_LPAGE_ENTRY(entry, pa) do { entry = pa | 1; } while (0)
+#define MAKE_SPAGE_ENTRY(entry, pa) do { entry = pa | 3; } while (0)
+
+#define GET_LV2ENTRY(entry, iova) (\
+ (unsigned long *)phys_to_virt(entry & S5P_LV2TABLE_MASK) +\
+ ((iova & (~S5P_SECTION_MASK)) >> S5P_SPAGE_SHIFT))
+
+/* slab cache for level 2 page tables */
+static struct kmem_cache *l2table_cachep;
+
+static inline void pgtable_flush(void *vastart, void *vaend)
+{
+ dmac_flush_range(vastart, vaend);
+ outer_flush_range(virt_to_phys(vastart),
+ virt_to_phys(vaend));
+}
+
+static int exynos_iommu_fault_handler(struct iommu_domain *domain,
+ struct device *dev, unsigned long iova, int flags)
+{
+ struct exynos_iommu_domain *priv= domain->priv;
+ int ret;
+
+ ret = default_fault_handler(flags, __pa(priv->pgtable), iova);
+
+ dev_err(priv->dev,
+ "\t\tSet Fault handler with iommu_set_fault_handler().\n");
+ dev_err(priv->dev, "\t\tto handle System MMU fault.\n");
+
+ return ret;
+}
+
+static int exynos_iommu_domain_init(struct iommu_domain *domain)
+{
+ struct exynos_iommu_domain *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->pgtable = (unsigned long *)__get_free_pages(GFP_KERNEL,
+ (S5P_LV1TABLE_ENTRIES * sizeof(unsigned long)) >> PAGE_SHIFT);
+ if (!priv->pgtable) {
+ kfree(priv);
+ return -ENOMEM;
+ }
+
+ memset(priv->pgtable, 0, S5P_LV1TABLE_ENTRIES * sizeof(unsigned long));
+ pgtable_flush(priv->pgtable, priv->pgtable + S5P_LV1TABLE_ENTRIES);
+
+ spin_lock_init(&priv->lock);
+
+ domain->priv = priv;
+
+ iommu_set_fault_handler(domain, &exynos_iommu_fault_handler);
+
+ return 0;
+}
+
+static void exynos_iommu_domain_destroy(struct iommu_domain *domain)
+{
+ struct exynos_iommu_domain *priv = domain->priv;
+
+ free_pages((unsigned long)priv->pgtable,
+ (S5P_LV1TABLE_ENTRIES * sizeof(unsigned long)) >> PAGE_SHIFT);
+
+ kfree(priv);
+
+ domain->priv = NULL;
+}
+
+static int exynos_iommu_attach_device(struct iommu_domain *domain,
+ struct device *dev)
+{
+ struct exynos_iommu_domain *priv = domain->priv;
+ int ret;
+
+ spin_lock(&priv->lock);
+
+ priv->dev = dev;
+
+ ret = exynos_iommu_enable(domain);
+
+ spin_unlock(&priv->lock);
+
+ return ret;
+}
+
+static void exynos_iommu_detach_device(struct iommu_domain *domain,
+ struct device *dev)
+{
+ struct exynos_iommu_domain *priv = domain->priv;
+
+ spin_lock(&priv->lock);
+
+ if (priv->dev == dev) {
+ exynos_iommu_disable(domain);
+ priv->dev = NULL;
+ }
+
+ spin_unlock(&priv->lock);
+}
+
+static bool section_available(struct iommu_domain *domain,
+ unsigned long *lv1entry)
+{
+ struct exynos_iommu_domain *priv = domain->priv;
+
+ if (S5P_SECTION_LV1_ENTRY(*lv1entry)) {
+ dev_err(priv->dev, "1MB entry alread exists at 0x%08x\n",
+ (lv1entry - priv->pgtable) * SZ_1M);
+ return false;
+ }
+
+ if (S5P_PAGE_LV1_ENTRY(*lv1entry)) {
+ unsigned long *lv2end, *lv2base;
+
+ lv2base = phys_to_virt(*lv1entry & S5P_LV2TABLE_MASK);
+ lv2end = lv2base + S5P_LV2TABLE_ENTRIES;
+ while (lv2base != lv2end) {
+ if (!S5P_FAULT_LV2_ENTRY(*lv2base)) {
+ dev_err(priv->dev, "Failed to free L2 page "
+ "table for section mapping.\n");
+ return false;
+ }
+ lv2base++;
+ }
+
+ kmem_cache_free(l2table_cachep,
+ phys_to_virt(*lv1entry & S5P_LV2TABLE_MASK));
+
+ MAKE_FAULT_ENTRY(*lv1entry);
+ }
+
+ return true;
+}
+
+static bool write_lpage(unsigned long *head_entry, unsigned long phys_addr)
+{
+ unsigned long *entry, *end;
+
+ entry = head_entry;
+ end = entry + (1 << S5P_LPAGE_ORDER);
+
+ while (entry != end) {
+ if (!S5P_FAULT_LV2_ENTRY(*entry))
+ break;
+
+ MAKE_LPAGE_ENTRY(*entry, phys_addr);
+
+ entry++;
+ }
+
+ if (entry != end) {
+ end = entry;
+ while (entry != head_entry)
+ MAKE_FAULT_ENTRY(*(--entry));
+
+ return false;
+ }
+
+ return true;
+}
+
+static int exynos_iommu_map(struct iommu_domain *domain, unsigned long iova,
+ phys_addr_t paddr, int gfp_order, int prot)
+{
+ struct exynos_iommu_domain *priv = domain->priv;
+ unsigned long *start_entry, *entry, *end_entry;
+ int num_entry;
+ int ret = 0;
+ unsigned long flags;
+
+ BUG_ON(priv->pgtable== NULL);
+
+ spin_lock_irqsave(&priv->pgtablelock, flags);
+
+ start_entry = entry = priv->pgtable + (iova >> S5P_SECTION_SHIFT);
+
+ if (gfp_order >= S5P_SECTION_ORDER) {
+ BUG_ON((paddr | iova) & ~S5P_SECTION_MASK);
+ /* 1MiB mapping */
+
+ num_entry = 1 << (gfp_order - S5P_SECTION_ORDER);
+ end_entry = entry + num_entry;
+
+ while (entry != end_entry) {
+ if (!section_available(domain, entry))
+ break;
+
+ MAKE_SECTION_ENTRY(*entry, paddr);
+
+ paddr += S5P_SECTION_SIZE;
+ entry++;
+ }
+
+ if (entry != end_entry)
+ goto mapping_error;
+
+ pgtable_flush(start_entry, entry);
+ goto mapping_done;
+ }
+
+ if (S5P_FAULT_LV1_ENTRY(*entry)) {
+ unsigned long *l2table;
+
+ l2table = kmem_cache_zalloc(l2table_cachep, GFP_KERNEL);
+ if (!l2table) {
+ ret = -ENOMEM;
+ goto nomem_error;
+ }
+
+ pgtable_flush(entry, entry + S5P_LV2TABLE_ENTRIES);
+
+ MAKE_LV2TABLE_ENTRY(*entry, virt_to_phys(l2table));
+ pgtable_flush(entry, entry + 1);
+ }
+
+ /* 'entry' points level 2 entries, hereafter */
+ entry = GET_LV2ENTRY(*entry, iova);
+
+ start_entry = entry;
+ num_entry = 1 << gfp_order;
+ end_entry = entry + num_entry;
+
+ if (gfp_order >= S5P_LPAGE_ORDER) {
+ /* large page(64KiB) mapping */
+ BUG_ON((paddr | iova) & ~S5P_LPAGE_MASK);
+
+ while (entry != end_entry) {
+ if (!write_lpage(entry, paddr)) {
+ pr_err("%s: "
+ "Failed to allocate large page entry."
+ "\n", __func__);
+ break;
+ }
+
+ paddr += S5P_LPAGE_SIZE;
+ entry += (1 << S5P_LPAGE_ORDER);
+ }
+
+ if (entry != end_entry) {
+ entry -= 1 << S5P_LPAGE_ORDER;
+ goto mapping_error;
+ }
+ } else {
+ /* page (4KiB) mapping */
+ while (entry != end_entry && S5P_FAULT_LV2_ENTRY(*entry)) {
+
+ MAKE_SPAGE_ENTRY(*entry, paddr);
+
+ entry++;
+ paddr += S5P_SPAGE_SIZE;
+ }
+
+ if (entry != end_entry) {
+ pr_err("%s: Failed to allocate small page entry.\n",
+ __func__);
+ goto mapping_error;
+ }
+ }
+
+ pgtable_flush(start_entry, entry);
+mapping_error:
+ if (entry != end_entry) {
+ unsigned long *current_entry = entry;
+ while (entry != start_entry)
+ MAKE_FAULT_ENTRY(*(--entry));
+ pgtable_flush(start_entry, current_entry);
+ ret = -EADDRINUSE;
+ }
+
+nomem_error:
+mapping_done:
+ spin_unlock_irqrestore(&priv->pgtablelock, flags);
+
+ return 0;
+}
+
+static int exynos_iommu_unmap(struct iommu_domain *domain, unsigned long iova,
+ int gfp_order)
+{
+ struct exynos_iommu_domain *priv= domain->priv;
+ unsigned long *entry;
+ int num_entry;
+ unsigned long flags;
+
+ BUG_ON(priv->pgtable == NULL);
+
+ spin_lock_irqsave(&priv->pgtablelock, flags);
+
+ entry = priv->pgtable + (iova >> S5P_SECTION_SHIFT);
+
+ if (gfp_order >= S5P_SECTION_ORDER) {
+ gfp_order -= S5P_SECTION_ORDER;
+ num_entry = 1 << (gfp_order - S5P_SECTION_ORDER);
+ while (num_entry--) {
+ if (S5P_SECTION_LV1_ENTRY(*entry)) {
+ MAKE_FAULT_ENTRY(*entry);
+ } else if (S5P_PAGE_LV1_ENTRY(*entry)) {
+ unsigned long *lv2beg, *lv2end;
+ lv2beg = phys_to_virt(
+ *entry & S5P_LV2TABLE_MASK);
+ lv2end = lv2beg + S5P_LV2TABLE_ENTRIES;
+ while (lv2beg != lv2end) {
+ MAKE_FAULT_ENTRY(*lv2beg);
+ lv2beg++;
+ }
+ }
+ entry++;
+ }
+ } else {
+ entry = GET_LV2ENTRY(*entry, iova);
+
+ BUG_ON(S5P_LPAGE_LV2_ENTRY(*entry) &&
+ (gfp_order < S5P_LPAGE_ORDER));
+
+ num_entry = 1 << gfp_order;
+
+ while (num_entry--) {
+ MAKE_FAULT_ENTRY(*entry);
+ entry++;
+ }
+ }
+
+ if (priv->dev)
+ exynos_sysmmu_tlb_invalidate(priv->dev);
+
+ spin_unlock_irqrestore(&priv->pgtablelock, flags);
+
+ return 0;
+}
+
+static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *domain,
+ unsigned long iova)
+{
+ struct exynos_iommu_domain *priv= domain->priv;
+ unsigned long *entry;
+ unsigned long offset;
+
+ entry = priv->pgtable + (iova >> S5P_SECTION_SHIFT);
+
+ if (S5P_FAULT_LV1_ENTRY(*entry))
+ return 0;
+
+ offset = iova & ~S5P_SECTION_MASK;
+
+ if (S5P_SECTION_LV1_ENTRY(*entry))
+ return (*entry & S5P_SECTION_MASK) + offset;
+
+ entry = GET_LV2ENTRY(*entry, iova);
+
+ if (S5P_SPAGE_LV2_ENTRY(*entry))
+ return (*entry & S5P_SPAGE_MASK) + (iova & ~S5P_SPAGE_MASK);
+
+ if (S5P_LPAGE_LV2_ENTRY(*entry))
+ return (*entry & S5P_LPAGE_MASK) + (iova & ~S5P_LPAGE_MASK);
+
+ return 0;
+}
+
+static int exynos_iommu_domain_has_cap(struct iommu_domain *domain,
+ unsigned long cap)
+{
+ return 0;
+}
+
+static struct iommu_ops exynos_iommu_ops = {
+ .domain_init = &exynos_iommu_domain_init,
+ .domain_destroy = &exynos_iommu_domain_destroy,
+ .attach_dev = &exynos_iommu_attach_device,
+ .detach_dev = &exynos_iommu_detach_device,
+ .map = &exynos_iommu_map,
+ .unmap = &exynos_iommu_unmap,
+ .iova_to_phys = &exynos_iommu_iova_to_phys,
+ .domain_has_cap = &exynos_iommu_domain_has_cap,
+};
+
+static int __init exynos_iommu_init(void)
+{
+ l2table_cachep = kmem_cache_create("SysMMU Lv2 Tables",
+ S5P_LV2TABLE_SIZE, S5P_LV2TABLE_SIZE, 0, NULL);
+ if (!l2table_cachep)
+ return -ENOMEM;
+
+ register_iommu(&exynos_iommu_ops);
+
+ return 0;
+}
+arch_initcall(exynos_iommu_init);
--
1.7.1
^ permalink raw reply related
* [PATCH 4/4 v2] iommu/exynos: Use bus_set_iommu instead of register_iommu
From: KyongHo Cho @ 2011-09-26 4:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1317012170-28597-1-git-send-email-pullip.cho@samsung.com>
This replaces register_iommu() with bus_set_iommu() according to the
suggestion of Joerg Roedel.
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: KyongHo Cho <pullip.cho@samsung.com>
---
drivers/iommu/exynos_iommu.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/iommu/exynos_iommu.c b/drivers/iommu/exynos_iommu.c
index 9b3f108..34e673f 100644
--- a/drivers/iommu/exynos_iommu.c
+++ b/drivers/iommu/exynos_iommu.c
@@ -926,7 +926,7 @@ static int __init exynos_iommu_init(void)
if (!l2table_cachep)
return -ENOMEM;
- register_iommu(&exynos_iommu_ops);
+ bus_set_iommu(&platform_bus_type, &exynos_iommu_ops);
return 0;
}
--
1.7.1
^ permalink raw reply related
* [PATCH 3/4] iommu/exynos: Add iommu driver for Exynos4 Platforms
From: KyongHo Cho @ 2011-09-26 4:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <4E7FE0A4.4050105@cn.fujitsu.com>
Thanks. I will try.
Regards,
Cho KyongHo.
On Mon, Sep 26, 2011 at 11:17 AM, Wanlong Gao <gaowanlong@cn.fujitsu.com> wrote:
> On 09/26/2011 08:44 AM, KyongHo Cho wrote:
>
>> Hi.
>>
>> On Sat, Sep 24, 2011 at 6:38 PM, Russell King - ARM Linux
>> <linux@arm.linux.org.uk> wrote:
>>> On Sat, Sep 24, 2011 at 07:35:45AM +0000, ??? wrote:
>>>> +# EXYNOS IOMMU support
>>>> +config EXYNOS_IOMMU
>>>> + bool "Exynos IOMMU Support"
>>>> + depends on ARCH_EXYNOS4
>>>> + select IOMMU_API
>>>> + select EXYNOS4_DEV_SYSMMU
>>>> + help
>>>
>>> Looks like your mailer converted tabs to one space. ?This makes it more
>>> difficult to read this patch as a whole. ?Don't expect good reviews as
>>> long as your mailer breaks stuff in this way.
>> Sorry for that :(
>> I will try another way to send patches correctly.
>
>
> Use *git send-email* instead.
>
> Thanks
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at ?http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply
* [PATCH] dma/imx-sdma+imx-dma: explicitly #include <linux/module.h>
From: Uwe Kleine-König @ 2011-09-26 6:26 UTC (permalink / raw)
To: linux-arm-kernel
This is needed after commit
include: replace linux/module.h with "struct module" wherever possible
(currently 25215aa in next).
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
Hello,
maybe it's sensible for Paul to take that before his commit?
Best regards
Uwe
drivers/dma/imx-dma.c | 1 +
drivers/dma/imx-sdma.c | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index d99f71c..3732de8 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -23,6 +23,7 @@
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/dmaengine.h>
+#include <linux/module.h>
#include <asm/irq.h>
#include <mach/dma-v1.h>
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index b5cc27d..86fb6e5 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -34,6 +34,7 @@
#include <linux/dmaengine.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/module.h>
#include <asm/irq.h>
#include <mach/sdma.h>
--
1.7.6.3
^ permalink raw reply related
* [PATCH 07/11] OMAP2+: board-generic: Add DT support to generic board
From: Rajendra Nayak @ 2011-09-26 6:32 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1316809399-19579-8-git-send-email-b-cousson@ti.com>
Hi Benoit,
On Saturday 24 September 2011 01:53 AM, Benoit Cousson wrote:
> Re-cycle the original board-generic file to support Device Tree
> for every OMAP2+ variants.
> Note: Since it is a completely new content in the existing file
> I removed the original copyright.
>
> The current approach is an intermediate step before having only
> one machine descriptor that will use some generic DT aware
> functions.
What config does this work with currently? If I use omap2plus_defconfig
should I explicitly disable everything other than say CONFIG_ARCH_OMAP4
if I want it working on OMAP4?
regards,
Rajendra
>
> Signed-off-by: Benoit Cousson<b-cousson@ti.com>
> Cc: Tony Lindgren<tony@atomide.com>
> ---
> arch/arm/mach-omap2/Kconfig | 8 ++-
> arch/arm/mach-omap2/board-generic.c | 129 ++++++++++++++++++++++------------
> 2 files changed, 89 insertions(+), 48 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 7edf802..5934a27 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -106,9 +106,13 @@ comment "OMAP Board Type"
> depends on ARCH_OMAP2PLUS
>
> config MACH_OMAP_GENERIC
> - bool "Generic OMAP board"
> - depends on ARCH_OMAP2
> + bool "Generic OMAP2+ board"
> + depends on ARCH_OMAP2PLUS
> + select USE_OF
> default y
> + help
> + Support for generic TI OMAP2+ boards using Flattened Device Tree.
> + More information at Documentation/devicetree
>
> config MACH_OMAP2_TUSB6010
> bool
> diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
> index e8d45d3..dcbd64c 100644
> --- a/arch/arm/mach-omap2/board-generic.c
> +++ b/arch/arm/mach-omap2/board-generic.c
> @@ -1,76 +1,113 @@
> /*
> - * linux/arch/arm/mach-omap2/board-generic.c
> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
> *
> - * Copyright (C) 2005 Nokia Corporation
> - * Author: Paul Mundt<paul.mundt@nokia.com>
> - *
> - * Modified from mach-omap/omap1/board-generic.c
> - *
> - * Code for generic OMAP2 board. Should work on many OMAP2 systems where
> - * the bootloader passes the board-specific data to the kernel.
> - * Do not put any board specific code to this file; create a new machine
> - * type if you need custom low-level initializations.
> + * Support for generic OMAP2+ device tree boards.
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 as
> * published by the Free Software Foundation.
> */
>
> -#include<linux/kernel.h>
> -#include<linux/init.h>
> -#include<linux/device.h>
> +#include<linux/io.h>
> +#include<linux/of_platform.h>
> +#include<linux/irqdomain.h>
>
> #include<mach/hardware.h>
> -#include<asm/mach-types.h>
> #include<asm/mach/arch.h>
> -#include<asm/mach/map.h>
>
> -#include<mach/gpio.h>
> -#include<plat/usb.h>
> #include<plat/board.h>
> #include<plat/common.h>
> +#include<mach/omap4-common.h>
>
> -static struct omap_board_config_kernel generic_config[] = {
> +
> +static struct of_device_id omap_dt_match_table[] __initdata = {
> + { .compatible = "simple-bus", },
> + { .compatible = "ti,omap-infra", },
> + { }
> };
>
> -static void __init omap_generic_init_early(void)
> -{
> - omap2_init_common_infrastructure();
> -}
> +static struct of_device_id intc_match[] __initdata = {
> + { .compatible = "ti,omap3-intc", },
> + { .compatible = "arm,cortex-a9-gic", },
> + { }
> +};
>
> static void __init omap_generic_init(void)
> {
> + struct device_node *node = of_find_matching_node(NULL, intc_match);
> + if (node)
> + irq_domain_add_simple(node, 0);
> +
> omap_serial_init();
> omap_sdrc_init(NULL, NULL);
> - omap_board_config = generic_config;
> - omap_board_config_size = ARRAY_SIZE(generic_config);
> -}
>
> -static void __init omap_generic_map_io(void)
> -{
> - if (cpu_is_omap242x()) {
> - omap2_set_globals_242x();
> - omap242x_map_common_io();
> - } else if (cpu_is_omap243x()) {
> - omap2_set_globals_243x();
> - omap243x_map_common_io();
> - } else if (cpu_is_omap34xx()) {
> - omap2_set_globals_3xxx();
> - omap34xx_map_common_io();
> - } else if (cpu_is_omap44xx()) {
> - omap2_set_globals_443x();
> - omap44xx_map_common_io();
> - }
> + of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
> }
>
> -/* XXX This machine entry name should be updated */
> -MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
> - /* Maintainer: Paul Mundt<paul.mundt@nokia.com> */
> - .atag_offset = 0x100,
> +#if defined(CONFIG_SOC_OMAP2420)
> +static const char *omap242x_boards_compat[] __initdata = {
> + "ti,omap2420",
> + NULL,
> +};
> +
> +DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
> .reserve = omap_reserve,
> - .map_io = omap_generic_map_io,
> - .init_early = omap_generic_init_early,
> + .map_io = omap242x_map_io,
> + .init_early = omap2420_init_early,
> .init_irq = omap2_init_irq,
> .init_machine = omap_generic_init,
> .timer =&omap2_timer,
> + .dt_compat = omap242x_boards_compat,
> +MACHINE_END
> +#endif
> +
> +#if defined(CONFIG_SOC_OMAP2430)
> +static const char *omap243x_boards_compat[] __initdata = {
> + "ti,omap2430",
> + NULL,
> +};
> +
> +DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
> + .reserve = omap_reserve,
> + .map_io = omap243x_map_io,
> + .init_early = omap2430_init_early,
> + .init_irq = omap2_init_irq,
> + .init_machine = omap_generic_init,
> + .timer =&omap2_timer,
> + .dt_compat = omap243x_boards_compat,
> +MACHINE_END
> +#endif
> +
> +#if defined(CONFIG_ARCH_OMAP3)
> +static const char *omap3_boards_compat[] __initdata = {
> + "ti,omap3",
> + NULL,
> +};
> +
> +DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
> + .reserve = omap_reserve,
> + .map_io = omap3_map_io,
> + .init_early = omap3430_init_early,
> + .init_irq = omap3_init_irq,
> + .init_machine = omap_generic_init,
> + .timer =&omap3_timer,
> + .dt_compat = omap3_boards_compat,
> +MACHINE_END
> +#endif
> +
> +#if defined(CONFIG_ARCH_OMAP4)
> +static const char *omap4_boards_compat[] __initdata = {
> + "ti,omap4",
> + NULL,
> +};
> +
> +DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
> + .reserve = omap_reserve,
> + .map_io = omap4_map_io,
> + .init_early = omap4430_init_early,
> + .init_irq = gic_init_irq,
> + .init_machine = omap_generic_init,
> + .timer =&omap4_timer,
> + .dt_compat = omap4_boards_compat,
> MACHINE_END
> +#endif
^ permalink raw reply
* [PATCH] ARM: imx/mx31moboard: use mc13xxx structs instead of removed mc13783 structs
From: Uwe Kleine-König @ 2011-09-26 6:50 UTC (permalink / raw)
To: linux-arm-kernel
This is needed with patch
mfd: Remove mc13783 API functions and symbols
(currently cde41c030 in next)
Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
---
arch/arm/mach-imx/mach-mx31moboard.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index e910d5f..1dd16c0 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -224,7 +224,7 @@ static struct mc13xxx_regulator_init_data moboard_regulators[] = {
},
};
-static struct mc13783_led_platform_data moboard_led[] = {
+static struct mc13xxx_led_platform_data moboard_led[] = {
{
.id = MC13783_LED_R1,
.name = "coreboard-led-4:red",
@@ -257,7 +257,7 @@ static struct mc13783_led_platform_data moboard_led[] = {
},
};
-static struct mc13783_leds_platform_data moboard_leds = {
+static struct mc13xxx_leds_platform_data moboard_leds = {
.num_leds = ARRAY_SIZE(moboard_led),
.led = moboard_led,
.flags = MC13783_LED_SLEWLIMTC,
@@ -266,7 +266,7 @@ static struct mc13783_leds_platform_data moboard_leds = {
.tc2_period = MC13783_LED_PERIOD_10MS,
};
-static struct mc13783_buttons_platform_data moboard_buttons = {
+static struct mc13xxx_buttons_platform_data moboard_buttons = {
.b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE |
MC13783_BUTTON_POL_INVERT,
.b1on_key = KEY_POWER,
--
1.7.6.3
^ permalink raw reply related
* [PATCH v3 0/6] add initial imx6q support
From: Shawn Guo @ 2011-09-26 7:20 UTC (permalink / raw)
To: linux-arm-kernel
This patch series adds the initial support for imx6q, which is a
Cortex-A9 Quad Core based SoC.
We chose to add imx6q support into mach-imx other than mach-mx5 or
a new mach-mx6, because we intend to merge mach-mx5 into mach-imx, so
that we have only mach-imx for imx family.
It's based on v3.1-rc7 with the patches below applied.
* [PATCH v2 0/5] Convert DEBUG_LL UART selection to a Kconfig choice
http://thread.gmane.org/gmane.linux.ports.arm.kernel/129702
* [PATCH v4 2/2] ARM: l2x0: Add OF based initialization
http://article.gmane.org/gmane.linux.kernel/1164401
* [PATCH 1/7] ARM: l2x0: add empty l2x0_of_init
http://article.gmane.org/gmane.linux.ports.arm.kernel/130878
* [PATCH 0/3] GIC OF bindings
http://thread.gmane.org/gmane.linux.drivers.devicetree/8338/
For suspend/resume support, it needs the following extra patches as the
prerequisite.
* [PATCH 00/11] Add L2 cache cleaning to generic CPU suspend
http://thread.gmane.org/gmane.linux.ports.arm.kernel/130957/
* [PATCH v2 0/5] CPU PM notifiers
http://thread.gmane.org/gmane.linux.ports.arm.kernel/131212/focus=131353
* [PATCH v2 2/2] ARM: smp_scu: remove __init annotation from
scu_enable()
http://permalink.gmane.org/gmane.linux.ports.arm.kernel/131358
Changes since v2:
* Refine the L2 register save/restore implementation per Lorenzo's
suggestion
* Rebase to Rob's latest GIC OF bindings series
* Rebase to Sascha's MULTI_IRQ_HANDLER support series
Changes since v1:
* Use the existing IMX_IO_P2V for static mapping
* Fix the MXC_INTERNAL_IRQS breakage introduced by GIC definition
* Retrieve clock frequency for fixed clocks from device tree
* Drop early_initcall from imx_src_init() and call it from imx6q
platform initialization
* Use readl_relaxed/writel_relaxed rather than __raw_readl/__raw_writel
as suggested by Arnd
* Kill unnecessary imx_local_timer_pre_suspend/resume functions
* Kill Kconfig symbol MACH_IMX6Q
* Rebase to rmk's "Add L2 cache cleaning to generic CPU suspend" series
so that we can retain L2 cache with necessary L2 register
save/restore across suspend/resume cycle
* Rebase to Rob's new "GIC OF bindings" series
Thanks.
Shawn Guo (6):
arm/imx6q: add device tree source
arm/imx6q: add core definitions and low-level debug uart
arm/imx6q: add core drivers clock, gpc, mmdc and src
arm/imx6q: add smp and cpu hotplug support
arm/imx6q: add device tree machine support
arm/imx6q: add suspend/resume support
Documentation/devicetree/bindings/arm/fsl.txt | 6 +
arch/arm/Kconfig | 2 +-
arch/arm/Kconfig.debug | 7 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/imx6q-sabreauto.dts | 82 +
arch/arm/boot/dts/imx6q.dtsi | 555 +++++++
arch/arm/mach-imx/Kconfig | 29 +-
arch/arm/mach-imx/Makefile | 10 +
arch/arm/mach-imx/Makefile.boot | 4 +
arch/arm/mach-imx/clock-imx6q.c | 2012 +++++++++++++++++++++++++
arch/arm/mach-imx/gpc.c | 113 ++
arch/arm/mach-imx/head-v7.S | 103 ++
arch/arm/mach-imx/hotplug.c | 44 +
arch/arm/mach-imx/lluart.c | 32 +
arch/arm/mach-imx/localtimer.c | 35 +
arch/arm/mach-imx/mach-imx6q.c | 84 +
arch/arm/mach-imx/mmdc.c | 71 +
arch/arm/mach-imx/platsmp.c | 85 ++
arch/arm/mach-imx/pm-imx6q.c | 90 ++
arch/arm/mach-imx/src.c | 49 +
arch/arm/mm/Kconfig | 2 +-
arch/arm/plat-mxc/Kconfig | 5 +
arch/arm/plat-mxc/include/mach/common.h | 27 +
arch/arm/plat-mxc/include/mach/debug-macro.S | 2 +
arch/arm/plat-mxc/include/mach/hardware.h | 6 +
arch/arm/plat-mxc/include/mach/irqs.h | 10 +-
arch/arm/plat-mxc/include/mach/memory.h | 3 +
arch/arm/plat-mxc/include/mach/mx6q.h | 33 +
28 files changed, 3497 insertions(+), 5 deletions(-)
^ permalink raw reply
* [PATCH v3 1/6] arm/imx6q: add device tree source
From: Shawn Guo @ 2011-09-26 7:20 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1317021651-17359-1-git-send-email-shawn.guo@linaro.org>
It adds device tree source and documentation for imx6q platform.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
Documentation/devicetree/bindings/arm/fsl.txt | 6 +
arch/arm/boot/dts/imx6q-sabreauto.dts | 82 ++++
arch/arm/boot/dts/imx6q.dtsi | 555 +++++++++++++++++++++++++
3 files changed, 643 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/fsl.txt
create mode 100644 arch/arm/boot/dts/imx6q-sabreauto.dts
create mode 100644 arch/arm/boot/dts/imx6q.dtsi
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
new file mode 100644
index 0000000..345bfc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -0,0 +1,6 @@
+Freescale i.MX Platforms Device Tree Bindings
+-----------------------------------------------
+
+i.MX6 Quad SABRE Automotive Board
+Required root node properties:
+ - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
new file mode 100644
index 0000000..7dd93e8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad SABRE Automotive Board";
+ compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
+ };
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clkl {
+ compatible = "fsl,imx6q-clkl", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clkh {
+ compatible = "fsl,imx6q-clkh", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx6q-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ aips-bus at 02100000 { /* AIPS2 */
+ enet at 02188000 {
+ phy-mode = "rgmii";
+ local-mac-address = [00 04 9F 01 1B 61];
+ status = "okay";
+ };
+
+ usdhc at 02198000 { /* uSDHC3 */
+ cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */
+ wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */
+ status = "okay";
+ };
+
+ usdhc at 0219c000 { /* uSDHC4 */
+ fsl,card-wired;
+ status = "okay";
+ };
+
+ uart3: uart at 021f0000 { /* UART4 */
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ debug-led {
+ label = "Heartbeat";
+ gpios = <&gpio2 25 0>; /* GPIO3_25 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
new file mode 100644
index 0000000..843e545
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -0,0 +1,555 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu at 1 {
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu at 2 {
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu at 3 {
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ intc: interrupt-controller at 00a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ timer at 00a00600 {
+ compatible = "arm,smp-twd";
+ reg = <0x00a00600 0x100>;
+ interrupts = <1 13 0xf4>;
+ };
+
+ L2: l2-cache at 00a02000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00a02000 0x1000>;
+ interrupts = <0 92 0x04>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ aips-bus at 02000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x100000>;
+ ranges;
+
+ spba-bus at 02000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x40000>;
+ ranges;
+
+ spdif at 02004000 {
+ reg = <0x02004000 0x4000>;
+ interrupts = <0 52 0x04>;
+ };
+
+ ecspi at 02008000 { /* eCSPI1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02008000 0x4000>;
+ interrupts = <0 31 0x04>;
+ status = "disabled";
+ };
+
+ ecspi at 0200c000 { /* eCSPI2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0200c000 0x4000>;
+ interrupts = <0 32 0x04>;
+ status = "disabled";
+ };
+
+ ecspi at 02010000 { /* eCSPI3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02010000 0x4000>;
+ interrupts = <0 33 0x04>;
+ status = "disabled";
+ };
+
+ ecspi at 02014000 { /* eCSPI4 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02014000 0x4000>;
+ interrupts = <0 34 0x04>;
+ status = "disabled";
+ };
+
+ ecspi at 02018000 { /* eCSPI5 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02018000 0x4000>;
+ interrupts = <0 35 0x04>;
+ status = "disabled";
+ };
+
+ uart0: uart at 02020000 { /* UART1 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <0 26 0x04>;
+ status = "disabled";
+ };
+
+ esai at 02024000 {
+ reg = <0x02024000 0x4000>;
+ interrupts = <0 51 0x04>;
+ };
+
+ ssi at 02028000 { /* SSI1 */
+ reg = <0x02028000 0x4000>;
+ interrupts = <0 46 0x04>;
+ };
+
+ ssi at 0202c000 { /* SSI2 */
+ reg = <0x0202c000 0x4000>;
+ interrupts = <0 47 0x04>;
+ };
+
+ ssi at 02030000 { /* SSI3 */
+ reg = <0x02030000 0x4000>;
+ interrupts = <0 48 0x04>;
+ };
+
+ asrc at 02034000 {
+ reg = <0x02034000 0x4000>;
+ interrupts = <0 50 0x04>;
+ };
+
+ spba at 0203c000 {
+ reg = <0x0203c000 0x4000>;
+ };
+ };
+
+ vpu at 02040000 {
+ reg = <0x02040000 0x3c000>;
+ interrupts = <0 3 0x04 0 12 0x04>;
+ };
+
+ aipstz at 0207c000 { /* AIPSTZ1 */
+ reg = <0x0207c000 0x4000>;
+ };
+
+ pwm at 02080000 { /* PWM1 */
+ reg = <0x02080000 0x4000>;
+ interrupts = <0 83 0x04>;
+ };
+
+ pwm at 02084000 { /* PWM2 */
+ reg = <0x02084000 0x4000>;
+ interrupts = <0 84 0x04>;
+ };
+
+ pwm at 02088000 { /* PWM3 */
+ reg = <0x02088000 0x4000>;
+ interrupts = <0 85 0x04>;
+ };
+
+ pwm at 0208c000 { /* PWM4 */
+ reg = <0x0208c000 0x4000>;
+ interrupts = <0 86 0x04>;
+ };
+
+ flexcan at 02090000 { /* CAN1 */
+ reg = <0x02090000 0x4000>;
+ interrupts = <0 110 0x04>;
+ };
+
+ flexcan at 02094000 { /* CAN2 */
+ reg = <0x02094000 0x4000>;
+ interrupts = <0 111 0x04>;
+ };
+
+ gpt at 02098000 {
+ compatible = "fsl,imx6q-gpt";
+ reg = <0x02098000 0x4000>;
+ interrupts = <0 55 0x04>;
+ };
+
+ gpio0: gpio at 0209c000 { /* GPIO1 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x0209c000 0x4000>;
+ interrupts = <0 66 0x04 0 67 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio1: gpio at 020a0000 { /* GPIO2 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a0000 0x4000>;
+ interrupts = <0 68 0x04 0 69 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio at 020a4000 { /* GPIO3 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a4000 0x4000>;
+ interrupts = <0 70 0x04 0 71 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio at 020a8000 { /* GPIO4 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a8000 0x4000>;
+ interrupts = <0 72 0x04 0 73 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio4: gpio at 020ac000 { /* GPIO5 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020ac000 0x4000>;
+ interrupts = <0 74 0x04 0 75 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio5: gpio at 020b0000 { /* GPIO6 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020b0000 0x4000>;
+ interrupts = <0 76 0x04 0 77 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio6: gpio at 020b4000 { /* GPIO7 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020b4000 0x4000>;
+ interrupts = <0 78 0x04 0 79 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ kpp at 020b8000 {
+ reg = <0x020b8000 0x4000>;
+ interrupts = <0 82 0x04>;
+ };
+
+ wdog at 020bc000 { /* WDOG1 */
+ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <0 80 0x04>;
+ status = "disabled";
+ };
+
+ wdog at 020c0000 { /* WDOG2 */
+ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+ reg = <0x020c0000 0x4000>;
+ interrupts = <0 81 0x04>;
+ status = "disabled";
+ };
+
+ ccm at 020c4000 {
+ compatible = "fsl,imx6q-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 0x04 0 88 0x04>;
+ };
+
+ anatop at 020c8000 {
+ compatible = "fsl,imx6q-anatop";
+ reg = <0x020c8000 0x1000>;
+ interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+ };
+
+ usbphy at 020c9000 { /* USBPHY1 */
+ reg = <0x020c9000 0x1000>;
+ interrupts = <0 44 0x04>;
+ };
+
+ usbphy at 020ca000 { /* USBPHY2 */
+ reg = <0x020ca000 0x1000>;
+ interrupts = <0 45 0x04>;
+ };
+
+ snvs at 020cc000 {
+ reg = <0x020cc000 0x4000>;
+ interrupts = <0 19 0x04 0 20 0x04>;
+ };
+
+ epit at 020d0000 { /* EPIT1 */
+ reg = <0x020d0000 0x4000>;
+ interrupts = <0 56 0x04>;
+ };
+
+ epit at 020d4000 { /* EPIT2 */
+ reg = <0x020d4000 0x4000>;
+ interrupts = <0 57 0x04>;
+ };
+
+ src at 020d8000 {
+ compatible = "fsl,imx6q-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <0 91 0x04 0 96 0x04>;
+ };
+
+ gpc at 020dc000 {
+ compatible = "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <0 89 0x04 0 90 0x04>;
+ };
+
+ iomuxc at 020e0000 {
+ reg = <0x020e0000 0x4000>;
+ };
+
+ dcic at 020e4000 { /* DCIC1 */
+ reg = <0x020e4000 0x4000>;
+ interrupts = <0 124 0x04>;
+ };
+
+ dcic at 020e8000 { /* DCIC2 */
+ reg = <0x020e8000 0x4000>;
+ interrupts = <0 125 0x04>;
+ };
+
+ sdma at 020ec000 {
+ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+ reg = <0x020ec000 0x4000>;
+ interrupts = <0 2 0x04>;
+ };
+ };
+
+ aips-bus at 02100000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02100000 0x100000>;
+ ranges;
+
+ caam at 02100000 {
+ reg = <0x02100000 0x40000>;
+ interrupts = <0 105 0x04 0 106 0x04>;
+ };
+
+ aipstz at 0217c000 { /* AIPSTZ2 */
+ reg = <0x0217c000 0x4000>;
+ };
+
+ enet at 02188000 {
+ compatible = "fsl,imx6q-fec";
+ reg = <0x02188000 0x4000>;
+ interrupts = <0 118 0x04 0 119 0x04>;
+ status = "disabled";
+ };
+
+ mlb at 0218c000 {
+ reg = <0x0218c000 0x4000>;
+ interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+ };
+
+ usdhc at 02190000 { /* uSDHC1 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02190000 0x4000>;
+ interrupts = <0 22 0x04>;
+ status = "disabled";
+ };
+
+ usdhc at 02194000 { /* uSDHC2 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02194000 0x4000>;
+ interrupts = <0 23 0x04>;
+ status = "disabled";
+ };
+
+ usdhc at 02198000 { /* uSDHC3 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <0 24 0x04>;
+ status = "disabled";
+ };
+
+ usdhc at 0219c000 { /* uSDHC4 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x0219c000 0x4000>;
+ interrupts = <0 25 0x04>;
+ status = "disabled";
+ };
+
+ i2c at 021a0000 { /* I2C1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a0000 0x4000>;
+ interrupts = <0 36 0x04>;
+ status = "disabled";
+ };
+
+ i2c at 021a4000 { /* I2C2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a4000 0x4000>;
+ interrupts = <0 37 0x04>;
+ status = "disabled";
+ };
+
+ i2c at 021a8000 { /* I2C3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a8000 0x4000>;
+ interrupts = <0 38 0x04>;
+ status = "disabled";
+ };
+
+ romcp at 021ac000 {
+ reg = <0x021ac000 0x4000>;
+ };
+
+ mmdc at 021b0000 { /* MMDC0 */
+ compatible = "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ };
+
+ mmdc at 021b4000 { /* MMDC1 */
+ reg = <0x021b4000 0x4000>;
+ };
+
+ weim at 021b8000 {
+ reg = <0x021b8000 0x4000>;
+ interrupts = <0 14 0x04>;
+ };
+
+ ocotp at 021bc000 {
+ reg = <0x021bc000 0x4000>;
+ };
+
+ ocotp at 021c0000 {
+ reg = <0x021c0000 0x4000>;
+ interrupts = <0 21 0x04>;
+ };
+
+ tzasc at 021d0000 { /* TZASC1 */
+ reg = <0x021d0000 0x4000>;
+ interrupts = <0 108 0x04>;
+ };
+
+ tzasc at 021d4000 { /* TZASC2 */
+ reg = <0x021d4000 0x4000>;
+ interrupts = <0 109 0x04>;
+ };
+
+ audmux at 021d8000 {
+ reg = <0x021d8000 0x4000>;
+ };
+
+ mipi at 021dc000 { /* MIPI-CSI */
+ reg = <0x021dc000 0x4000>;
+ };
+
+ mipi at 021e0000 { /* MIPI-DSI */
+ reg = <0x021e0000 0x4000>;
+ };
+
+ vdoa at 021e4000 {
+ reg = <0x021e4000 0x4000>;
+ interrupts = <0 18 0x04>;
+ };
+
+ uart1: uart at 021e8000 { /* UART2 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021e8000 0x4000>;
+ interrupts = <0 27 0x04>;
+ status = "disabled";
+ };
+
+ uart2: uart at 021ec000 { /* UART3 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021ec000 0x4000>;
+ interrupts = <0 28 0x04>;
+ status = "disabled";
+ };
+
+ uart3: uart at 021f0000 { /* UART4 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021f0000 0x4000>;
+ interrupts = <0 29 0x04>;
+ status = "disabled";
+ };
+
+ uart4: uart at 021f4000 { /* UART5 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021f4000 0x4000>;
+ interrupts = <0 30 0x04>;
+ status = "disabled";
+ };
+ };
+ };
+};
--
1.7.4.1
^ permalink raw reply related
* [PATCH v3 2/6] arm/imx6q: add core definitions and low-level debug uart
From: Shawn Guo @ 2011-09-26 7:20 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1317021651-17359-1-git-send-email-shawn.guo@linaro.org>
It adds the core definitions and low-level debug uart support
for imx6q.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/Kconfig | 2 +-
arch/arm/Kconfig.debug | 7 +++++
arch/arm/Makefile | 1 +
arch/arm/mach-imx/Kconfig | 15 +++++++++++-
arch/arm/mach-imx/Makefile | 2 +
arch/arm/mach-imx/Makefile.boot | 4 +++
arch/arm/mach-imx/lluart.c | 32 +++++++++++++++++++++++++
arch/arm/plat-mxc/Kconfig | 5 ++++
arch/arm/plat-mxc/include/mach/debug-macro.S | 2 +
arch/arm/plat-mxc/include/mach/hardware.h | 6 ++++
arch/arm/plat-mxc/include/mach/irqs.h | 10 ++++++-
arch/arm/plat-mxc/include/mach/memory.h | 3 ++
arch/arm/plat-mxc/include/mach/mx6q.h | 33 ++++++++++++++++++++++++++
13 files changed, 118 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/mach-imx/lluart.c
create mode 100644 arch/arm/plat-mxc/include/mach/mx6q.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 414ff01..e023b06 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1376,7 +1376,7 @@ config SMP
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
- ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE
+ ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || SOC_IMX6Q
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
help
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index add32ff..ba206e0 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -155,6 +155,13 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53.
+ config DEBUG_IMX6Q_UART
+ bool "i.MX6Q Debug UART"
+ depends on SOC_IMX6Q
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6Q.
+
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
bool "Use S3C UART 0 for low-level debug"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5665c2a..9f4a924 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -162,6 +162,7 @@ machine-$(CONFIG_ARCH_MX2) := imx
machine-$(CONFIG_ARCH_MX25) := imx
machine-$(CONFIG_ARCH_MX3) := imx
machine-$(CONFIG_ARCH_MX5) := mx5
+machine-$(CONFIG_ARCH_MX6) := imx
machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0519dd7..e88e366 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -58,7 +58,6 @@ config SOC_IMX35
select ARCH_MX35
select MXC_AVIC
-
if ARCH_MX1
comment "MX1 platforms:"
@@ -606,3 +605,17 @@ config MACH_VPR200
configurations for the board and its peripherals.
endif
+
+if ARCH_MX6
+comment "i.MX6 family:"
+
+config SOC_IMX6Q
+ bool "i.MX6 Quad support"
+ select ARM_GIC
+ select CPU_V7
+ select USE_OF
+
+ help
+ This enables support for Freescale i.MX6 Quad processor.
+
+endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index e9eb36d..96ecc96 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -61,3 +61,5 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
+
+obj-$(CONFIG_DEBUG_LL) += lluart.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index dbe6120..22d8588 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -17,3 +17,7 @@ initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000
zreladdr-$(CONFIG_ARCH_MX3) += 0x80008000
params_phys-$(CONFIG_ARCH_MX3) := 0x80000100
initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000
+
+zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
+params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
+initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
new file mode 100644
index 0000000..d4ab6f2
--- /dev/null
+++ b/arch/arm/mach-imx/lluart.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+static struct map_desc imx_lluart_desc = {
+#ifdef CONFIG_DEBUG_IMX6Q_UART
+ .virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
+ .pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
+ .length = MX6Q_UART4_SIZE,
+ .type = MT_DEVICE,
+#endif
+};
+
+void __init imx_lluart_map_io(void)
+{
+ if (imx_lluart_desc.virtual)
+ iotable_init(&imx_lluart_desc, 1);
+}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index a5353fc..e548f9b 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -48,6 +48,11 @@ config ARCH_MX51
help
This enables support for systems based on the Freescale i.MX51 family
+config ARCH_MX6
+ bool "i.MX6"
+ help
+ This enables support for systems based on the Freescale i.MX6 family
+
endchoice
source "arch/arm/mach-imx/Kconfig"
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 07cfdbe..f2ce2cb 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -24,6 +24,8 @@
#define UART_PADDR MX51_UART1_BASE_ADDR
#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
#define UART_PADDR MX53_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX6Q_UART)
+#define UART_PADDR MX6Q_UART4_BASE_ADDR
#endif
#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR)
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index a8bfd56..ee28c56 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -86,6 +86,11 @@
* SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000
+ * mx6q:
+ * SCU 0x00a00000+0x001000 -> 0xf4000000+0x001000
+ * CCM 0x020c4000+0x004000 -> 0xf42c4000+0x004000
+ * ANATOP 0x020c8000+0x001000 -> 0xf42c8000+0x001000
+ * UART4 0x021f0000+0x004000 -> 0xf42f0000+0x004000
*/
#define IMX_IO_P2V(x) ( \
0xf4000000 + \
@@ -97,6 +102,7 @@
#include <mach/mxc.h>
+#include <mach/mx6q.h>
#include <mach/mx50.h>
#include <mach/mx51.h>
#include <mach/mx53.h>
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 00e812b..fd9efb0 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -14,9 +14,15 @@
#include <asm-generic/gpio.h>
/*
- * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
+ * SoCs with GIC interrupt controller have 160 IRQs, those with TZIC
+ * have 128 IRQs, and those with AVIC have 64.
+ *
+ * To support single image, the biggest number should be defined on
+ * top of the list.
*/
-#ifdef CONFIG_MXC_TZIC
+#if defined CONFIG_ARM_GIC
+#define MXC_INTERNAL_IRQS 160
+#elif defined CONFIG_MXC_TZIC
#define MXC_INTERNAL_IRQS 128
#else
#define MXC_INTERNAL_IRQS 64
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 3ec84b9..ff2792c 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -19,6 +19,7 @@
#define MX50_PHYS_OFFSET UL(0x70000000)
#define MX51_PHYS_OFFSET UL(0x90000000)
#define MX53_PHYS_OFFSET UL(0x70000000)
+#define MX6Q_PHYS_OFFSET UL(0x10000000)
#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
# if defined CONFIG_ARCH_MX1
@@ -37,6 +38,8 @@
# define PLAT_PHYS_OFFSET MX51_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX53
# define PLAT_PHYS_OFFSET MX53_PHYS_OFFSET
+# elif defined CONFIG_SOC_IMX6Q
+# define PLAT_PHYS_OFFSET MX6Q_PHYS_OFFSET
# endif
#endif
diff --git a/arch/arm/plat-mxc/include/mach/mx6q.h b/arch/arm/plat-mxc/include/mach/mx6q.h
new file mode 100644
index 0000000..254a561
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx6q.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_MX6Q_H__
+#define __MACH_MX6Q_H__
+
+#define MX6Q_IO_P2V(x) IMX_IO_P2V(x)
+#define MX6Q_IO_ADDRESS(x) IOMEM(MX6Q_IO_P2V(x))
+
+/*
+ * The following are the blocks that need to be statically mapped.
+ * For other blocks, the base address really should be retrieved from
+ * device tree.
+ */
+#define MX6Q_SCU_BASE_ADDR 0x00a00000
+#define MX6Q_SCU_SIZE 0x1000
+#define MX6Q_CCM_BASE_ADDR 0x020c4000
+#define MX6Q_CCM_SIZE 0x4000
+#define MX6Q_ANATOP_BASE_ADDR 0x020c8000
+#define MX6Q_ANATOP_SIZE 0x1000
+#define MX6Q_UART4_BASE_ADDR 0x021f0000
+#define MX6Q_UART4_SIZE 0x4000
+
+#endif /* __MACH_MX6Q_H__ */
--
1.7.4.1
^ permalink raw reply related
* [PATCH v3 3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src
From: Shawn Guo @ 2011-09-26 7:20 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1317021651-17359-1-git-send-email-shawn.guo@linaro.org>
It adds a number of core drivers support for imx6q, including clock,
General Power Controller (gpc), Multi Mode DDR Controller(mmdc) and
System Reset Controller (src).
Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/Kconfig | 13 +
arch/arm/mach-imx/Makefile | 4 +
arch/arm/mach-imx/clock-imx6q.c | 2012 +++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/gpc.c | 113 +++
arch/arm/mach-imx/mmdc.c | 71 ++
arch/arm/mach-imx/src.c | 49 +
6 files changed, 2262 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-imx/clock-imx6q.c
create mode 100644 arch/arm/mach-imx/gpc.c
create mode 100644 arch/arm/mach-imx/mmdc.c
create mode 100644 arch/arm/mach-imx/src.c
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index e88e366..af73b3e 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,5 +1,15 @@
config IMX_HAVE_DMA_V1
bool
+
+config HAVE_IMX_GPC
+ bool
+
+config HAVE_IMX_MMDC
+ bool
+
+config HAVE_IMX_SRC
+ bool
+
#
# ARCH_MX31 and ARCH_MX35 are left for compatibility
# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
@@ -613,6 +623,9 @@ config SOC_IMX6Q
bool "i.MX6 Quad support"
select ARM_GIC
select CPU_V7
+ select HAVE_IMX_GPC
+ select HAVE_IMX_MMDC
+ select HAVE_IMX_SRC
select USE_OF
help
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 96ecc96..8c21fda 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -63,3 +63,7 @@ obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
obj-$(CONFIG_DEBUG_LL) += lluart.o
+obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
+obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
+obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
new file mode 100644
index 0000000..66f4add
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -0,0 +1,2012 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/div64.h>
+#include <asm/mach/map.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+#define PLL_BASE IMX_IO_ADDRESS(MX6Q_ANATOP_BASE_ADDR)
+#define PLL1_SYS (PLL_BASE + 0x000)
+#define PLL2_BUS (PLL_BASE + 0x030)
+#define PLL3_USB_OTG (PLL_BASE + 0x010)
+#define PLL4_AUDIO (PLL_BASE + 0x070)
+#define PLL5_VIDEO (PLL_BASE + 0x0a0)
+#define PLL6_MLB (PLL_BASE + 0x0d0)
+#define PLL7_USB_HOST (PLL_BASE + 0x020)
+#define PLL8_ENET (PLL_BASE + 0x0e0)
+#define PFD_480 (PLL_BASE + 0x0f0)
+#define PFD_528 (PLL_BASE + 0x100)
+#define PLL_NUM_OFFSET 0x010
+#define PLL_DENOM_OFFSET 0x020
+
+#define PFD0 7
+#define PFD1 15
+#define PFD2 23
+#define PFD3 31
+#define PFD_FRAC_MASK 0x3f
+
+#define BM_PLL_BYPASS (0x1 << 16)
+#define BM_PLL_ENABLE (0x1 << 13)
+#define BM_PLL_POWER_DOWN (0x1 << 12)
+#define BM_PLL_LOCK (0x1 << 31)
+#define BP_PLL_SYS_DIV_SELECT 0
+#define BM_PLL_SYS_DIV_SELECT (0x7f << 0)
+#define BP_PLL_BUS_DIV_SELECT 0
+#define BM_PLL_BUS_DIV_SELECT (0x1 << 0)
+#define BP_PLL_USB_DIV_SELECT 0
+#define BM_PLL_USB_DIV_SELECT (0x3 << 0)
+#define BP_PLL_AV_DIV_SELECT 0
+#define BM_PLL_AV_DIV_SELECT (0x7f << 0)
+#define BP_PLL_ENET_DIV_SELECT 0
+#define BM_PLL_ENET_DIV_SELECT (0x3 << 0)
+#define BM_PLL_ENET_EN_PCIE (0x1 << 19)
+#define BM_PLL_ENET_EN_SATA (0x1 << 20)
+
+#define CCM_BASE IMX_IO_ADDRESS(MX6Q_CCM_BASE_ADDR)
+#define CCR (CCM_BASE + 0x00)
+#define CCDR (CCM_BASE + 0x04)
+#define CSR (CCM_BASE + 0x08)
+#define CCSR (CCM_BASE + 0x0c)
+#define CACRR (CCM_BASE + 0x10)
+#define CBCDR (CCM_BASE + 0x14)
+#define CBCMR (CCM_BASE + 0x18)
+#define CSCMR1 (CCM_BASE + 0x1c)
+#define CSCMR2 (CCM_BASE + 0x20)
+#define CSCDR1 (CCM_BASE + 0x24)
+#define CS1CDR (CCM_BASE + 0x28)
+#define CS2CDR (CCM_BASE + 0x2c)
+#define CDCDR (CCM_BASE + 0x30)
+#define CHSCCDR (CCM_BASE + 0x34)
+#define CSCDR2 (CCM_BASE + 0x38)
+#define CSCDR3 (CCM_BASE + 0x3c)
+#define CSCDR4 (CCM_BASE + 0x40)
+#define CWDR (CCM_BASE + 0x44)
+#define CDHIPR (CCM_BASE + 0x48)
+#define CDCR (CCM_BASE + 0x4c)
+#define CTOR (CCM_BASE + 0x50)
+#define CLPCR (CCM_BASE + 0x54)
+#define CISR (CCM_BASE + 0x58)
+#define CIMR (CCM_BASE + 0x5c)
+#define CCOSR (CCM_BASE + 0x60)
+#define CGPR (CCM_BASE + 0x64)
+#define CCGR0 (CCM_BASE + 0x68)
+#define CCGR1 (CCM_BASE + 0x6c)
+#define CCGR2 (CCM_BASE + 0x70)
+#define CCGR3 (CCM_BASE + 0x74)
+#define CCGR4 (CCM_BASE + 0x78)
+#define CCGR5 (CCM_BASE + 0x7c)
+#define CCGR6 (CCM_BASE + 0x80)
+#define CCGR7 (CCM_BASE + 0x84)
+#define CMEOR (CCM_BASE + 0x88)
+
+#define CG0 0
+#define CG1 2
+#define CG2 4
+#define CG3 6
+#define CG4 8
+#define CG5 10
+#define CG6 12
+#define CG7 14
+#define CG8 16
+#define CG9 18
+#define CG10 20
+#define CG11 22
+#define CG12 24
+#define CG13 26
+#define CG14 28
+#define CG15 30
+
+#define BM_CCSR_PLL1_SW_SEL (0x1 << 2)
+#define BM_CCSR_STEP_SEL (0x1 << 8)
+
+#define BP_CACRR_ARM_PODF 0
+#define BM_CACRR_ARM_PODF (0x7 << 0)
+
+#define BP_CBCDR_PERIPH2_CLK2_PODF 0
+#define BM_CBCDR_PERIPH2_CLK2_PODF (0x7 << 0)
+#define BP_CBCDR_MMDC_CH1_AXI_PODF 3
+#define BM_CBCDR_MMDC_CH1_AXI_PODF (0x7 << 3)
+#define BP_CBCDR_AXI_SEL 6
+#define BM_CBCDR_AXI_SEL (0x3 << 6)
+#define BP_CBCDR_IPG_PODF 8
+#define BM_CBCDR_IPG_PODF (0x3 << 8)
+#define BP_CBCDR_AHB_PODF 10
+#define BM_CBCDR_AHB_PODF (0x7 << 10)
+#define BP_CBCDR_AXI_PODF 16
+#define BM_CBCDR_AXI_PODF (0x7 << 16)
+#define BP_CBCDR_MMDC_CH0_AXI_PODF 19
+#define BM_CBCDR_MMDC_CH0_AXI_PODF (0x7 << 19)
+#define BP_CBCDR_PERIPH_CLK_SEL 25
+#define BM_CBCDR_PERIPH_CLK_SEL (0x1 << 25)
+#define BP_CBCDR_PERIPH2_CLK_SEL 26
+#define BM_CBCDR_PERIPH2_CLK_SEL (0x1 << 26)
+#define BP_CBCDR_PERIPH_CLK2_PODF 27
+#define BM_CBCDR_PERIPH_CLK2_PODF (0x7 << 27)
+
+#define BP_CBCMR_GPU2D_AXI_SEL 0
+#define BM_CBCMR_GPU2D_AXI_SEL (0x1 << 0)
+#define BP_CBCMR_GPU3D_AXI_SEL 1
+#define BM_CBCMR_GPU3D_AXI_SEL (0x1 << 1)
+#define BP_CBCMR_GPU3D_CORE_SEL 4
+#define BM_CBCMR_GPU3D_CORE_SEL (0x3 << 4)
+#define BP_CBCMR_GPU3D_SHADER_SEL 8
+#define BM_CBCMR_GPU3D_SHADER_SEL (0x3 << 8)
+#define BP_CBCMR_PCIE_AXI_SEL 10
+#define BM_CBCMR_PCIE_AXI_SEL (0x1 << 10)
+#define BP_CBCMR_VDO_AXI_SEL 11
+#define BM_CBCMR_VDO_AXI_SEL (0x1 << 11)
+#define BP_CBCMR_PERIPH_CLK2_SEL 12
+#define BM_CBCMR_PERIPH_CLK2_SEL (0x3 << 12)
+#define BP_CBCMR_VPU_AXI_SEL 14
+#define BM_CBCMR_VPU_AXI_SEL (0x3 << 14)
+#define BP_CBCMR_GPU2D_CORE_SEL 16
+#define BM_CBCMR_GPU2D_CORE_SEL (0x3 << 16)
+#define BP_CBCMR_PRE_PERIPH_CLK_SEL 18
+#define BM_CBCMR_PRE_PERIPH_CLK_SEL (0x3 << 18)
+#define BP_CBCMR_PERIPH2_CLK2_SEL 20
+#define BM_CBCMR_PERIPH2_CLK2_SEL (0x1 << 20)
+#define BP_CBCMR_PRE_PERIPH2_CLK_SEL 21
+#define BM_CBCMR_PRE_PERIPH2_CLK_SEL (0x3 << 21)
+#define BP_CBCMR_GPU2D_CORE_PODF 23
+#define BM_CBCMR_GPU2D_CORE_PODF (0x7 << 23)
+#define BP_CBCMR_GPU3D_CORE_PODF 26
+#define BM_CBCMR_GPU3D_CORE_PODF (0x7 << 26)
+#define BP_CBCMR_GPU3D_SHADER_PODF 29
+#define BM_CBCMR_GPU3D_SHADER_PODF (0x7 << 29)
+
+#define BP_CSCMR1_PERCLK_PODF 0
+#define BM_CSCMR1_PERCLK_PODF (0x3f << 0)
+#define BP_CSCMR1_SSI1_SEL 10
+#define BM_CSCMR1_SSI1_SEL (0x3 << 10)
+#define BP_CSCMR1_SSI2_SEL 12
+#define BM_CSCMR1_SSI2_SEL (0x3 << 12)
+#define BP_CSCMR1_SSI3_SEL 14
+#define BM_CSCMR1_SSI3_SEL (0x3 << 14)
+#define BP_CSCMR1_USDHC1_SEL 16
+#define BM_CSCMR1_USDHC1_SEL (0x1 << 16)
+#define BP_CSCMR1_USDHC2_SEL 17
+#define BM_CSCMR1_USDHC2_SEL (0x1 << 17)
+#define BP_CSCMR1_USDHC3_SEL 18
+#define BM_CSCMR1_USDHC3_SEL (0x1 << 18)
+#define BP_CSCMR1_USDHC4_SEL 19
+#define BM_CSCMR1_USDHC4_SEL (0x1 << 19)
+#define BP_CSCMR1_EMI_PODF 20
+#define BM_CSCMR1_EMI_PODF (0x7 << 20)
+#define BP_CSCMR1_EMI_SLOW_PODF 23
+#define BM_CSCMR1_EMI_SLOW_PODF (0x7 << 23)
+#define BP_CSCMR1_EMI_SEL 27
+#define BM_CSCMR1_EMI_SEL (0x3 << 27)
+#define BP_CSCMR1_EMI_SLOW_SEL 29
+#define BM_CSCMR1_EMI_SLOW_SEL (0x3 << 29)
+
+#define BP_CSCMR2_CAN_PODF 2
+#define BM_CSCMR2_CAN_PODF (0x3f << 2)
+#define BM_CSCMR2_LDB_DI0_IPU_DIV (0x1 << 10)
+#define BM_CSCMR2_LDB_DI1_IPU_DIV (0x1 << 11)
+#define BP_CSCMR2_ESAI_SEL 19
+#define BM_CSCMR2_ESAI_SEL (0x3 << 19)
+
+#define BP_CSCDR1_UART_PODF 0
+#define BM_CSCDR1_UART_PODF (0x3f << 0)
+#define BP_CSCDR1_USDHC1_PODF 11
+#define BM_CSCDR1_USDHC1_PODF (0x7 << 11)
+#define BP_CSCDR1_USDHC2_PODF 16
+#define BM_CSCDR1_USDHC2_PODF (0x7 << 16)
+#define BP_CSCDR1_USDHC3_PODF 19
+#define BM_CSCDR1_USDHC3_PODF (0x7 << 19)
+#define BP_CSCDR1_USDHC4_PODF 22
+#define BM_CSCDR1_USDHC4_PODF (0x7 << 22)
+#define BP_CSCDR1_VPU_AXI_PODF 25
+#define BM_CSCDR1_VPU_AXI_PODF (0x7 << 25)
+
+#define BP_CS1CDR_SSI1_PODF 0
+#define BM_CS1CDR_SSI1_PODF (0x3f << 0)
+#define BP_CS1CDR_SSI1_PRED 6
+#define BM_CS1CDR_SSI1_PRED (0x7 << 6)
+#define BP_CS1CDR_ESAI_PRED 9
+#define BM_CS1CDR_ESAI_PRED (0x7 << 9)
+#define BP_CS1CDR_SSI3_PODF 16
+#define BM_CS1CDR_SSI3_PODF (0x3f << 16)
+#define BP_CS1CDR_SSI3_PRED 22
+#define BM_CS1CDR_SSI3_PRED (0x7 << 22)
+#define BP_CS1CDR_ESAI_PODF 25
+#define BM_CS1CDR_ESAI_PODF (0x7 << 25)
+
+#define BP_CS2CDR_SSI2_PODF 0
+#define BM_CS2CDR_SSI2_PODF (0x3f << 0)
+#define BP_CS2CDR_SSI2_PRED 6
+#define BM_CS2CDR_SSI2_PRED (0x7 << 6)
+#define BP_CS2CDR_LDB_DI0_SEL 9
+#define BM_CS2CDR_LDB_DI0_SEL (0x7 << 9)
+#define BP_CS2CDR_LDB_DI1_SEL 12
+#define BM_CS2CDR_LDB_DI1_SEL (0x7 << 12)
+#define BP_CS2CDR_ENFC_SEL 16
+#define BM_CS2CDR_ENFC_SEL (0x3 << 16)
+#define BP_CS2CDR_ENFC_PRED 18
+#define BM_CS2CDR_ENFC_PRED (0x7 << 18)
+#define BP_CS2CDR_ENFC_PODF 21
+#define BM_CS2CDR_ENFC_PODF (0x3f << 21)
+
+#define BP_CDCDR_ASRC_SERIAL_SEL 7
+#define BM_CDCDR_ASRC_SERIAL_SEL (0x3 << 7)
+#define BP_CDCDR_ASRC_SERIAL_PODF 9
+#define BM_CDCDR_ASRC_SERIAL_PODF (0x7 << 9)
+#define BP_CDCDR_ASRC_SERIAL_PRED 12
+#define BM_CDCDR_ASRC_SERIAL_PRED (0x7 << 12)
+#define BP_CDCDR_SPDIF_SEL 20
+#define BM_CDCDR_SPDIF_SEL (0x3 << 20)
+#define BP_CDCDR_SPDIF_PODF 22
+#define BM_CDCDR_SPDIF_PODF (0x7 << 22)
+#define BP_CDCDR_SPDIF_PRED 25
+#define BM_CDCDR_SPDIF_PRED (0x7 << 25)
+#define BP_CDCDR_HSI_TX_PODF 29
+#define BM_CDCDR_HSI_TX_PODF (0x7 << 29)
+#define BP_CDCDR_HSI_TX_SEL 28
+#define BM_CDCDR_HSI_TX_SEL (0x1 << 28)
+
+#define BP_CHSCCDR_IPU1_DI0_SEL 0
+#define BM_CHSCCDR_IPU1_DI0_SEL (0x7 << 0)
+#define BP_CHSCCDR_IPU1_DI0_PRE_PODF 3
+#define BM_CHSCCDR_IPU1_DI0_PRE_PODF (0x7 << 3)
+#define BP_CHSCCDR_IPU1_DI0_PRE_SEL 6
+#define BM_CHSCCDR_IPU1_DI0_PRE_SEL (0x7 << 6)
+#define BP_CHSCCDR_IPU1_DI1_SEL 9
+#define BM_CHSCCDR_IPU1_DI1_SEL (0x7 << 9)
+#define BP_CHSCCDR_IPU1_DI1_PRE_PODF 12
+#define BM_CHSCCDR_IPU1_DI1_PRE_PODF (0x7 << 12)
+#define BP_CHSCCDR_IPU1_DI1_PRE_SEL 15
+#define BM_CHSCCDR_IPU1_DI1_PRE_SEL (0x7 << 15)
+
+#define BP_CSCDR2_IPU2_DI0_SEL 0
+#define BM_CSCDR2_IPU2_DI0_SEL (0x7)
+#define BP_CSCDR2_IPU2_DI0_PRE_PODF 3
+#define BM_CSCDR2_IPU2_DI0_PRE_PODF (0x7 << 3)
+#define BP_CSCDR2_IPU2_DI0_PRE_SEL 6
+#define BM_CSCDR2_IPU2_DI0_PRE_SEL (0x7 << 6)
+#define BP_CSCDR2_IPU2_DI1_SEL 9
+#define BM_CSCDR2_IPU2_DI1_SEL (0x7 << 9)
+#define BP_CSCDR2_IPU2_DI1_PRE_PODF 12
+#define BM_CSCDR2_IPU2_DI1_PRE_PODF (0x7 << 12)
+#define BP_CSCDR2_IPU2_DI1_PRE_SEL 15
+#define BM_CSCDR2_IPU2_DI1_PRE_SEL (0x7 << 15)
+#define BP_CSCDR2_ECSPI_CLK_PODF 19
+#define BM_CSCDR2_ECSPI_CLK_PODF (0x3f << 19)
+
+#define BP_CSCDR3_IPU1_HSP_SEL 9
+#define BM_CSCDR3_IPU1_HSP_SEL (0x3 << 9)
+#define BP_CSCDR3_IPU1_HSP_PODF 11
+#define BM_CSCDR3_IPU1_HSP_PODF (0x7 << 11)
+#define BP_CSCDR3_IPU2_HSP_SEL 14
+#define BM_CSCDR3_IPU2_HSP_SEL (0x3 << 14)
+#define BP_CSCDR3_IPU2_HSP_PODF 16
+#define BM_CSCDR3_IPU2_HSP_PODF (0x7 << 16)
+
+#define BM_CDHIPR_AXI_PODF_BUSY (0x1 << 0)
+#define BM_CDHIPR_AHB_PODF_BUSY (0x1 << 1)
+#define BM_CDHIPR_MMDC_CH1_PODF_BUSY (0x1 << 2)
+#define BM_CDHIPR_PERIPH2_SEL_BUSY (0x1 << 3)
+#define BM_CDHIPR_MMDC_CH0_PODF_BUSY (0x1 << 4)
+#define BM_CDHIPR_PERIPH_SEL_BUSY (0x1 << 5)
+#define BM_CDHIPR_ARM_PODF_BUSY (0x1 << 16)
+
+#define BP_CLPCR_LPM 0
+#define BM_CLPCR_LPM (0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
+#define BM_CLPCR_SBYOS (0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC (0x1 << 7)
+#define BM_CLPCR_VSTBY (0x1 << 8)
+#define BP_CLPCR_STBY_COUNT 9
+#define BM_CLPCR_STBY_COUNT (0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
+
+#define FREQ_480M 480000000
+#define FREQ_528M 528000000
+#define FREQ_594M 594000000
+#define FREQ_650M 650000000
+#define FREQ_1300M 1300000000
+
+static struct clk pll1_sys;
+static struct clk pll2_bus;
+static struct clk pll3_usb_otg;
+static struct clk pll4_audio;
+static struct clk pll5_video;
+static struct clk pll6_mlb;
+static struct clk pll7_usb_host;
+static struct clk pll8_enet;
+static struct clk apbh_dma_clk;
+static struct clk arm_clk;
+static struct clk ipg_clk;
+static struct clk ahb_clk;
+static struct clk axi_clk;
+static struct clk mmdc_ch0_axi_clk;
+static struct clk mmdc_ch1_axi_clk;
+static struct clk periph_clk;
+static struct clk periph_pre_clk;
+static struct clk periph_clk2_clk;
+static struct clk periph2_clk;
+static struct clk periph2_pre_clk;
+static struct clk periph2_clk2_clk;
+static struct clk gpu2d_core_clk;
+static struct clk gpu3d_core_clk;
+static struct clk gpu3d_shader_clk;
+static struct clk ipg_perclk;
+static struct clk emi_clk;
+static struct clk emi_slow_clk;
+static struct clk can1_clk;
+static struct clk uart_clk;
+static struct clk usdhc1_clk;
+static struct clk usdhc2_clk;
+static struct clk usdhc3_clk;
+static struct clk usdhc4_clk;
+static struct clk vpu_clk;
+static struct clk hsi_tx_clk;
+static struct clk ipu1_di0_pre_clk;
+static struct clk ipu1_di1_pre_clk;
+static struct clk ipu2_di0_pre_clk;
+static struct clk ipu2_di1_pre_clk;
+static struct clk ipu1_clk;
+static struct clk ipu2_clk;
+static struct clk ssi1_clk;
+static struct clk ssi3_clk;
+static struct clk esai_clk;
+static struct clk ssi2_clk;
+static struct clk spdif_clk;
+static struct clk asrc_serial_clk;
+static struct clk gpu2d_axi_clk;
+static struct clk gpu3d_axi_clk;
+static struct clk pcie_clk;
+static struct clk vdo_axi_clk;
+static struct clk ldb_di0_clk;
+static struct clk ldb_di1_clk;
+static struct clk ipu1_di0_clk;
+static struct clk ipu1_di1_clk;
+static struct clk ipu2_di0_clk;
+static struct clk ipu2_di1_clk;
+static struct clk enfc_clk;
+static struct clk dummy_clk = {};
+
+static unsigned long external_high_reference;
+static unsigned long external_low_reference;
+static unsigned long oscillator_reference;
+
+static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
+{
+ return oscillator_reference;
+}
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+ return external_high_reference;
+}
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+ return external_low_reference;
+}
+
+static struct clk ckil_clk = {
+ .get_rate = get_low_reference_clock_rate,
+};
+
+static struct clk ckih_clk = {
+ .get_rate = get_high_reference_clock_rate,
+};
+
+static struct clk osc_clk = {
+ .get_rate = get_oscillator_reference_clock_rate,
+};
+
+static inline void __iomem *pll_get_reg_addr(struct clk *pll)
+{
+ if (pll == &pll1_sys)
+ return PLL1_SYS;
+ else if (pll == &pll2_bus)
+ return PLL2_BUS;
+ else if (pll == &pll3_usb_otg)
+ return PLL3_USB_OTG;
+ else if (pll == &pll4_audio)
+ return PLL4_AUDIO;
+ else if (pll == &pll5_video)
+ return PLL5_VIDEO;
+ else if (pll == &pll6_mlb)
+ return PLL6_MLB;
+ else if (pll == &pll7_usb_host)
+ return PLL7_USB_HOST;
+ else if (pll == &pll8_enet)
+ return PLL8_ENET;
+ else
+ BUG();
+
+ return NULL;
+}
+
+static int pll_enable(struct clk *clk)
+{
+ int timeout = 0x100000;
+ void __iomem *reg;
+ u32 val;
+
+ reg = pll_get_reg_addr(clk);
+ val = readl_relaxed(reg);
+ val &= ~BM_PLL_BYPASS;
+ val &= ~BM_PLL_POWER_DOWN;
+ /* 480MHz PLLs have the opposite definition for power bit */
+ if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
+ val |= BM_PLL_POWER_DOWN;
+ writel_relaxed(val, reg);
+
+ /* Wait for PLL to lock */
+ while (!(readl_relaxed(reg) & BM_PLL_LOCK) && --timeout)
+ cpu_relax();
+
+ if (unlikely(!timeout))
+ return -EBUSY;
+
+ /* Enable the PLL output now */
+ val = readl_relaxed(reg);
+ val |= BM_PLL_ENABLE;
+ writel_relaxed(val, reg);
+
+ return 0;
+}
+
+static void pll_disable(struct clk *clk)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = pll_get_reg_addr(clk);
+ val = readl_relaxed(reg);
+ val &= ~BM_PLL_ENABLE;
+ val |= BM_PLL_BYPASS;
+ val |= BM_PLL_POWER_DOWN;
+ if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
+ val &= ~BM_PLL_POWER_DOWN;
+ writel_relaxed(val, reg);
+}
+
+static unsigned long pll1_sys_get_rate(struct clk *clk)
+{
+ u32 div = (readl_relaxed(PLL1_SYS) & BM_PLL_SYS_DIV_SELECT) >>
+ BP_PLL_SYS_DIV_SELECT;
+
+ return clk_get_rate(clk->parent) * div / 2;
+}
+
+static int pll1_sys_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 val, div;
+
+ if (rate < FREQ_650M || rate > FREQ_1300M)
+ return -EINVAL;
+
+ div = rate * 2 / clk_get_rate(clk->parent);
+ val = readl_relaxed(PLL1_SYS);
+ val &= ~BM_PLL_SYS_DIV_SELECT;
+ val |= div << BP_PLL_SYS_DIV_SELECT;
+ writel_relaxed(val, PLL1_SYS);
+
+ return 0;
+}
+
+static unsigned long pll8_enet_get_rate(struct clk *clk)
+{
+ u32 div = (readl_relaxed(PLL8_ENET) & BM_PLL_ENET_DIV_SELECT) >>
+ BP_PLL_ENET_DIV_SELECT;
+
+ switch (div) {
+ case 0:
+ return 25000000;
+ case 1:
+ return 50000000;
+ case 2:
+ return 100000000;
+ case 3:
+ return 125000000;
+ }
+
+ return 0;
+}
+
+static int pll8_enet_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 val, div;
+
+ switch (rate) {
+ case 25000000:
+ div = 0;
+ break;
+ case 50000000:
+ div = 1;
+ break;
+ case 100000000:
+ div = 2;
+ break;
+ case 125000000:
+ div = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val = readl_relaxed(PLL8_ENET);
+ val &= ~BM_PLL_ENET_DIV_SELECT;
+ val |= div << BP_PLL_ENET_DIV_SELECT;
+ writel_relaxed(val, PLL8_ENET);
+
+ return 0;
+}
+
+static unsigned long pll_av_get_rate(struct clk *clk)
+{
+ void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ u32 mfn = readl_relaxed(reg + PLL_NUM_OFFSET);
+ u32 mfd = readl_relaxed(reg + PLL_DENOM_OFFSET);
+ u32 div = (readl_relaxed(reg) & BM_PLL_AV_DIV_SELECT) >>
+ BP_PLL_AV_DIV_SELECT;
+
+ return (parent_rate * div) + ((parent_rate / mfd) * mfn);
+}
+
+static int pll_av_set_rate(struct clk *clk, unsigned long rate)
+{
+ void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
+ unsigned int parent_rate = clk_get_rate(clk->parent);
+ u32 val, div;
+ u32 mfn, mfd = 1000000;
+ s64 temp64;
+
+ if (rate < FREQ_650M || rate > FREQ_1300M)
+ return -EINVAL;
+
+ div = rate / parent_rate;
+ temp64 = (u64) (rate - div * parent_rate);
+ temp64 *= mfd;
+ do_div(temp64, parent_rate);
+ mfn = temp64;
+
+ val = readl_relaxed(reg);
+ val &= ~BM_PLL_AV_DIV_SELECT;
+ val |= div << BP_PLL_AV_DIV_SELECT;
+ writel_relaxed(val, reg);
+ writel_relaxed(mfn, reg + PLL_NUM_OFFSET);
+ writel_relaxed(mfd, reg + PLL_DENOM_OFFSET);
+
+ return 0;
+}
+
+static void __iomem *pll_get_div_reg_bit(struct clk *clk, u32 *bp, u32 *bm)
+{
+ void __iomem *reg;
+
+ if (clk == &pll2_bus) {
+ reg = PLL2_BUS;
+ *bp = BP_PLL_BUS_DIV_SELECT;
+ *bm = BM_PLL_BUS_DIV_SELECT;
+ } else if (clk == &pll3_usb_otg) {
+ reg = PLL3_USB_OTG;
+ *bp = BP_PLL_USB_DIV_SELECT;
+ *bm = BM_PLL_USB_DIV_SELECT;
+ } else if (clk == &pll7_usb_host) {
+ reg = PLL7_USB_HOST;
+ *bp = BP_PLL_USB_DIV_SELECT;
+ *bm = BM_PLL_USB_DIV_SELECT;
+ } else {
+ BUG();
+ }
+
+ return reg;
+}
+
+static unsigned long pll_get_rate(struct clk *clk)
+{
+ void __iomem *reg;
+ u32 div, bp, bm;
+
+ reg = pll_get_div_reg_bit(clk, &bp, &bm);
+ div = (readl_relaxed(reg) & bm) >> bp;
+
+ return (div == 1) ? clk_get_rate(clk->parent) * 22 :
+ clk_get_rate(clk->parent) * 20;
+}
+
+static int pll_set_rate(struct clk *clk, unsigned long rate)
+{
+ void __iomem *reg;
+ u32 val, div, bp, bm;
+
+ if (rate == FREQ_528M)
+ div = 1;
+ else if (rate == FREQ_480M)
+ div = 0;
+ else
+ return -EINVAL;
+
+ reg = pll_get_div_reg_bit(clk, &bp, &bm);
+ val = readl_relaxed(reg);
+ val &= ~bm;
+ val |= div << bp;
+ writel_relaxed(val, reg);
+
+ return 0;
+}
+
+#define pll2_bus_get_rate pll_get_rate
+#define pll2_bus_set_rate pll_set_rate
+#define pll3_usb_otg_get_rate pll_get_rate
+#define pll3_usb_otg_set_rate pll_set_rate
+#define pll7_usb_host_get_rate pll_get_rate
+#define pll7_usb_host_set_rate pll_set_rate
+#define pll4_audio_get_rate pll_av_get_rate
+#define pll4_audio_set_rate pll_av_set_rate
+#define pll5_video_get_rate pll_av_get_rate
+#define pll5_video_set_rate pll_av_set_rate
+#define pll6_mlb_get_rate NULL
+#define pll6_mlb_set_rate NULL
+
+#define DEF_PLL(name) \
+ static struct clk name = { \
+ .enable = pll_enable, \
+ .disable = pll_disable, \
+ .get_rate = name##_get_rate, \
+ .set_rate = name##_set_rate, \
+ .parent = &osc_clk, \
+ }
+
+DEF_PLL(pll1_sys);
+DEF_PLL(pll2_bus);
+DEF_PLL(pll3_usb_otg);
+DEF_PLL(pll4_audio);
+DEF_PLL(pll5_video);
+DEF_PLL(pll6_mlb);
+DEF_PLL(pll7_usb_host);
+DEF_PLL(pll8_enet);
+
+static unsigned long pfd_get_rate(struct clk *clk)
+{
+ u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
+ u32 frac, bp_frac;
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.enable(&apbh_dma_clk);
+
+ bp_frac = clk->enable_shift - 7;
+ frac = readl_relaxed(clk->enable_reg) >> bp_frac & PFD_FRAC_MASK;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static int pfd_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 val, frac, bp_frac;
+ u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.enable(&apbh_dma_clk);
+
+ /*
+ * Round up the divider so that we don't set a rate
+ * higher than what is requested
+ */
+ tmp += rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+ frac = (frac < 12) ? 12 : frac;
+ frac = (frac > 35) ? 35 : frac;
+
+ /*
+ * The frac field always starts from 7 bits lower
+ * position of enable bit
+ */
+ bp_frac = clk->enable_shift - 7;
+ val = readl_relaxed(clk->enable_reg);
+ val &= ~(PFD_FRAC_MASK << bp_frac);
+ val |= frac << bp_frac;
+ writel_relaxed(val, clk->enable_reg);
+
+ tmp = (u64) clk_get_rate(clk->parent) * 18;
+ do_div(tmp, frac);
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.disable(&apbh_dma_clk);
+
+ return 0;
+}
+
+static unsigned long pfd_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 frac;
+ u64 tmp;
+
+ tmp = (u64) clk_get_rate(clk->parent) * 18;
+ tmp += rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+ frac = (frac < 12) ? 12 : frac;
+ frac = (frac > 35) ? 35 : frac;
+ tmp = (u64) clk_get_rate(clk->parent) * 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static int pfd_enable(struct clk *clk)
+{
+ u32 val;
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.enable(&apbh_dma_clk);
+
+ val = readl_relaxed(clk->enable_reg);
+ val &= ~(1 << clk->enable_shift);
+ writel_relaxed(val, clk->enable_reg);
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.disable(&apbh_dma_clk);
+
+ return 0;
+}
+
+static void pfd_disable(struct clk *clk)
+{
+ u32 val;
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.enable(&apbh_dma_clk);
+
+ val = readl_relaxed(clk->enable_reg);
+ val |= 1 << clk->enable_shift;
+ writel_relaxed(val, clk->enable_reg);
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.disable(&apbh_dma_clk);
+}
+
+#define DEF_PFD(name, er, es, p) \
+ static struct clk name = { \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .enable = pfd_enable, \
+ .disable = pfd_disable, \
+ .get_rate = pfd_get_rate, \
+ .set_rate = pfd_set_rate, \
+ .round_rate = pfd_round_rate, \
+ .parent = p, \
+ }
+
+DEF_PFD(pll2_pfd_352m, PFD_528, PFD0, &pll2_bus);
+DEF_PFD(pll2_pfd_594m, PFD_528, PFD1, &pll2_bus);
+DEF_PFD(pll2_pfd_400m, PFD_528, PFD2, &pll2_bus);
+DEF_PFD(pll3_pfd_720m, PFD_480, PFD0, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg);
+
+static unsigned long pll2_200m_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 2;
+}
+
+static struct clk pll2_200m = {
+ .parent = &pll2_pfd_400m,
+ .get_rate = pll2_200m_get_rate,
+};
+
+static unsigned long pll3_120m_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 4;
+}
+
+static struct clk pll3_120m = {
+ .parent = &pll3_usb_otg,
+ .get_rate = pll3_120m_get_rate,
+};
+
+static unsigned long pll3_80m_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 6;
+}
+
+static struct clk pll3_80m = {
+ .parent = &pll3_usb_otg,
+ .get_rate = pll3_80m_get_rate,
+};
+
+static unsigned long pll3_60m_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 8;
+}
+
+static struct clk pll3_60m = {
+ .parent = &pll3_usb_otg,
+ .get_rate = pll3_60m_get_rate,
+};
+
+static int pll1_sw_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 val = readl_relaxed(CCSR);
+
+ if (parent == &pll1_sys) {
+ val &= ~BM_CCSR_PLL1_SW_SEL;
+ val &= ~BM_CCSR_STEP_SEL;
+ } else if (parent == &osc_clk) {
+ val |= BM_CCSR_PLL1_SW_SEL;
+ val &= ~BM_CCSR_STEP_SEL;
+ } else if (parent == &pll2_pfd_400m) {
+ val |= BM_CCSR_PLL1_SW_SEL;
+ val |= BM_CCSR_STEP_SEL;
+ } else {
+ return -EINVAL;
+ }
+
+ writel_relaxed(val, CCSR);
+
+ return 0;
+}
+
+static struct clk pll1_sw_clk = {
+ .parent = &pll1_sys,
+ .set_parent = pll1_sw_clk_set_parent,
+};
+
+static void calc_pred_podf_dividers(u32 div, u32 *pred, u32 *podf)
+{
+ u32 min_pred, temp_pred, old_err, err;
+
+ if (div >= 512) {
+ *pred = 8;
+ *podf = 64;
+ } else if (div >= 8) {
+ min_pred = (div - 1) / 64 + 1;
+ old_err = 8;
+ for (temp_pred = 8; temp_pred >= min_pred; temp_pred--) {
+ err = div % temp_pred;
+ if (err == 0) {
+ *pred = temp_pred;
+ break;
+ }
+ err = temp_pred - err;
+ if (err < old_err) {
+ old_err = err;
+ *pred = temp_pred;
+ }
+ }
+ *podf = (div + *pred - 1) / *pred;
+ } else if (div < 8) {
+ *pred = div;
+ *podf = 1;
+ }
+}
+
+static int _clk_enable(struct clk *clk)
+{
+ u32 reg;
+ reg = readl_relaxed(clk->enable_reg);
+ reg |= 0x3 << clk->enable_shift;
+ writel_relaxed(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+ u32 reg;
+ reg = readl_relaxed(clk->enable_reg);
+ reg &= ~(0x3 << clk->enable_shift);
+ writel_relaxed(reg, clk->enable_reg);
+}
+
+struct divider {
+ struct clk *clk;
+ void __iomem *reg;
+ u32 bp_pred;
+ u32 bm_pred;
+ u32 bp_podf;
+ u32 bm_podf;
+};
+
+#define DEF_CLK_DIV1(d, c, r, b) \
+ static struct divider d = { \
+ .clk = c, \
+ .reg = r, \
+ .bp_podf = BP_##r##_##b##_PODF, \
+ .bm_podf = BM_##r##_##b##_PODF, \
+ }
+
+DEF_CLK_DIV1(arm_div, &arm_clk, CACRR, ARM);
+DEF_CLK_DIV1(ipg_div, &ipg_clk, CBCDR, IPG);
+DEF_CLK_DIV1(ahb_div, &ahb_clk, CBCDR, AHB);
+DEF_CLK_DIV1(axi_div, &axi_clk, CBCDR, AXI);
+DEF_CLK_DIV1(mmdc_ch0_axi_div, &mmdc_ch0_axi_clk, CBCDR, MMDC_CH0_AXI);
+DEF_CLK_DIV1(mmdc_ch1_axi_div, &mmdc_ch1_axi_clk, CBCDR, MMDC_CH1_AXI);
+DEF_CLK_DIV1(periph_clk2_div, &periph_clk2_clk, CBCDR, PERIPH_CLK2);
+DEF_CLK_DIV1(periph2_clk2_div, &periph2_clk2_clk, CBCDR, PERIPH2_CLK2);
+DEF_CLK_DIV1(gpu2d_core_div, &gpu2d_core_clk, CBCMR, GPU2D_CORE);
+DEF_CLK_DIV1(gpu3d_core_div, &gpu3d_core_clk, CBCMR, GPU3D_CORE);
+DEF_CLK_DIV1(gpu3d_shader_div, &gpu3d_shader_clk, CBCMR, GPU3D_SHADER);
+DEF_CLK_DIV1(ipg_perclk_div, &ipg_perclk, CSCMR1, PERCLK);
+DEF_CLK_DIV1(emi_div, &emi_clk, CSCMR1, EMI);
+DEF_CLK_DIV1(emi_slow_div, &emi_slow_clk, CSCMR1, EMI_SLOW);
+DEF_CLK_DIV1(can_div, &can1_clk, CSCMR2, CAN);
+DEF_CLK_DIV1(uart_div, &uart_clk, CSCDR1, UART);
+DEF_CLK_DIV1(usdhc1_div, &usdhc1_clk, CSCDR1, USDHC1);
+DEF_CLK_DIV1(usdhc2_div, &usdhc2_clk, CSCDR1, USDHC2);
+DEF_CLK_DIV1(usdhc3_div, &usdhc3_clk, CSCDR1, USDHC3);
+DEF_CLK_DIV1(usdhc4_div, &usdhc4_clk, CSCDR1, USDHC4);
+DEF_CLK_DIV1(vpu_div, &vpu_clk, CSCDR1, VPU_AXI);
+DEF_CLK_DIV1(hsi_tx_div, &hsi_tx_clk, CDCDR, HSI_TX);
+DEF_CLK_DIV1(ipu1_di0_pre_div, &ipu1_di0_pre_clk, CHSCCDR, IPU1_DI0_PRE);
+DEF_CLK_DIV1(ipu1_di1_pre_div, &ipu1_di1_pre_clk, CHSCCDR, IPU1_DI1_PRE);
+DEF_CLK_DIV1(ipu2_di0_pre_div, &ipu2_di0_pre_clk, CSCDR2, IPU2_DI0_PRE);
+DEF_CLK_DIV1(ipu2_di1_pre_div, &ipu2_di1_pre_clk, CSCDR2, IPU2_DI1_PRE);
+DEF_CLK_DIV1(ipu1_div, &ipu1_clk, CSCDR3, IPU1_HSP);
+DEF_CLK_DIV1(ipu2_div, &ipu2_clk, CSCDR3, IPU2_HSP);
+
+#define DEF_CLK_DIV2(d, c, r, b) \
+ static struct divider d = { \
+ .clk = c, \
+ .reg = r, \
+ .bp_pred = BP_##r##_##b##_PRED, \
+ .bm_pred = BM_##r##_##b##_PRED, \
+ .bp_podf = BP_##r##_##b##_PODF, \
+ .bm_podf = BM_##r##_##b##_PODF, \
+ }
+
+DEF_CLK_DIV2(ssi1_div, &ssi1_clk, CS1CDR, SSI1);
+DEF_CLK_DIV2(ssi3_div, &ssi3_clk, CS1CDR, SSI3);
+DEF_CLK_DIV2(esai_div, &esai_clk, CS1CDR, ESAI);
+DEF_CLK_DIV2(ssi2_div, &ssi2_clk, CS2CDR, SSI2);
+DEF_CLK_DIV2(enfc_div, &enfc_clk, CS2CDR, ENFC);
+DEF_CLK_DIV2(spdif_div, &spdif_clk, CDCDR, SPDIF);
+DEF_CLK_DIV2(asrc_serial_div, &asrc_serial_clk, CDCDR, ASRC_SERIAL);
+
+static struct divider *dividers[] = {
+ &arm_div,
+ &ipg_div,
+ &ahb_div,
+ &axi_div,
+ &mmdc_ch0_axi_div,
+ &mmdc_ch1_axi_div,
+ &periph_clk2_div,
+ &periph2_clk2_div,
+ &gpu2d_core_div,
+ &gpu3d_core_div,
+ &gpu3d_shader_div,
+ &ipg_perclk_div,
+ &emi_div,
+ &emi_slow_div,
+ &can_div,
+ &uart_div,
+ &usdhc1_div,
+ &usdhc2_div,
+ &usdhc3_div,
+ &usdhc4_div,
+ &vpu_div,
+ &hsi_tx_div,
+ &ipu1_di0_pre_div,
+ &ipu1_di1_pre_div,
+ &ipu2_di0_pre_div,
+ &ipu2_di1_pre_div,
+ &ipu1_div,
+ &ipu2_div,
+ &ssi1_div,
+ &ssi3_div,
+ &esai_div,
+ &ssi2_div,
+ &enfc_div,
+ &spdif_div,
+ &asrc_serial_div,
+};
+
+static unsigned long ldb_di_clk_get_rate(struct clk *clk)
+{
+ u32 val = readl_relaxed(CSCMR2);
+
+ val &= (clk == &ldb_di0_clk) ? BM_CSCMR2_LDB_DI0_IPU_DIV :
+ BM_CSCMR2_LDB_DI1_IPU_DIV;
+ if (val)
+ return clk_get_rate(clk->parent) / 7;
+ else
+ return clk_get_rate(clk->parent) * 2 / 7;
+}
+
+static int ldb_di_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ u32 val = readl_relaxed(CSCMR2);
+
+ if (rate * 7 <= parent_rate + parent_rate / 20)
+ val |= BM_CSCMR2_LDB_DI0_IPU_DIV;
+ else
+ val &= ~BM_CSCMR2_LDB_DI0_IPU_DIV;
+
+ writel_relaxed(val, CSCMR2);
+
+ return 0;
+}
+
+static unsigned long ldb_di_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+
+ if (rate * 7 <= parent_rate + parent_rate / 20)
+ return parent_rate / 7;
+ else
+ return 2 * parent_rate / 7;
+}
+
+static unsigned long _clk_get_rate(struct clk *clk)
+{
+ struct divider *d;
+ u32 val, pred, podf;
+ int i, num;
+
+ if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+ return ldb_di_clk_get_rate(clk);
+
+ num = ARRAY_SIZE(dividers);
+ for (i = 0; i < num; i++)
+ if (dividers[i]->clk == clk) {
+ d = dividers[i];
+ break;
+ }
+ if (i == num)
+ return clk_get_rate(clk->parent);
+
+ val = readl_relaxed(d->reg);
+ pred = ((val & d->bm_pred) >> d->bp_pred) + 1;
+ podf = ((val & d->bm_podf) >> d->bp_podf) + 1;
+
+ return clk_get_rate(clk->parent) / (pred * podf);
+}
+
+static int clk_busy_wait(struct clk *clk)
+{
+ int timeout = 0x100000;
+ u32 bm;
+
+ if (clk == &axi_clk)
+ bm = BM_CDHIPR_AXI_PODF_BUSY;
+ else if (clk == &ahb_clk)
+ bm = BM_CDHIPR_AHB_PODF_BUSY;
+ else if (clk == &mmdc_ch0_axi_clk)
+ bm = BM_CDHIPR_MMDC_CH0_PODF_BUSY;
+ else if (clk == &periph_clk)
+ bm = BM_CDHIPR_PERIPH_SEL_BUSY;
+ else if (clk == &arm_clk)
+ bm = BM_CDHIPR_ARM_PODF_BUSY;
+ else
+ return -EINVAL;
+
+ while ((readl_relaxed(CDHIPR) & bm) && --timeout)
+ cpu_relax();
+
+ if (unlikely(!timeout))
+ return -EBUSY;
+
+ return 0;
+}
+
+static int _clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ struct divider *d;
+ u32 val, div, max_div, pred = 0, podf;
+ int i, num;
+
+ if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+ return ldb_di_clk_set_rate(clk, rate);
+
+ num = ARRAY_SIZE(dividers);
+ for (i = 0; i < num; i++)
+ if (dividers[i]->clk == clk) {
+ d = dividers[i];
+ break;
+ }
+ if (i == num)
+ return -EINVAL;
+
+ max_div = ((d->bm_pred >> d->bp_pred) + 1) *
+ ((d->bm_pred >> d->bp_pred) + 1);
+
+ div = parent_rate / rate;
+ if (div == 0)
+ div++;
+
+ if ((parent_rate / div != rate) || div > max_div)
+ return -EINVAL;
+
+ if (d->bm_pred) {
+ calc_pred_podf_dividers(div, &pred, &podf);
+ } else {
+ pred = 1;
+ podf = div;
+ }
+
+ val = readl_relaxed(d->reg);
+ val &= ~(d->bm_pred | d->bm_podf);
+ val |= (pred - 1) << d->bp_pred | (podf - 1) << d->bp_podf;
+ writel_relaxed(val, d->reg);
+
+ if (clk == &axi_clk || clk == &ahb_clk ||
+ clk == &mmdc_ch0_axi_clk || clk == &arm_clk)
+ return clk_busy_wait(clk);
+
+ return 0;
+}
+
+static unsigned long _clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ u32 div = parent_rate / rate;
+ u32 div_max, pred = 0, podf;
+ struct divider *d;
+ int i, num;
+
+ if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+ return ldb_di_clk_round_rate(clk, rate);
+
+ num = ARRAY_SIZE(dividers);
+ for (i = 0; i < num; i++)
+ if (dividers[i]->clk == clk) {
+ d = dividers[i];
+ break;
+ }
+ if (i == num)
+ return -EINVAL;
+
+ if (div == 0 || parent_rate % rate)
+ div++;
+
+ if (d->bm_pred) {
+ calc_pred_podf_dividers(div, &pred, &podf);
+ div = pred * podf;
+ } else {
+ div_max = (d->bm_podf >> d->bp_podf) + 1;
+ if (div > div_max)
+ div = div_max;
+ }
+
+ return parent_rate / div;
+}
+
+struct multiplexer {
+ struct clk *clk;
+ void __iomem *reg;
+ u32 bp;
+ u32 bm;
+ int pnum;
+ struct clk *parents[];
+};
+
+static struct multiplexer axi_mux = {
+ .clk = &axi_clk,
+ .reg = CBCDR,
+ .bp = BP_CBCDR_AXI_SEL,
+ .bm = BM_CBCDR_AXI_SEL,
+ .parents = {
+ &periph_clk,
+ &pll2_pfd_400m,
+ &pll3_pfd_540m,
+ NULL
+ },
+};
+
+static struct multiplexer periph_mux = {
+ .clk = &periph_clk,
+ .reg = CBCDR,
+ .bp = BP_CBCDR_PERIPH_CLK_SEL,
+ .bm = BM_CBCDR_PERIPH_CLK_SEL,
+ .parents = {
+ &periph_pre_clk,
+ &periph_clk2_clk,
+ NULL
+ },
+};
+
+static struct multiplexer periph_pre_mux = {
+ .clk = &periph_pre_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PRE_PERIPH_CLK_SEL,
+ .bm = BM_CBCMR_PRE_PERIPH_CLK_SEL,
+ .parents = {
+ &pll2_bus,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ &pll2_200m,
+ NULL
+ },
+};
+
+static struct multiplexer periph_clk2_mux = {
+ .clk = &periph_clk2_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PERIPH_CLK2_SEL,
+ .bm = BM_CBCMR_PERIPH_CLK2_SEL,
+ .parents = {
+ &pll3_usb_otg,
+ &osc_clk,
+ NULL
+ },
+};
+
+static struct multiplexer periph2_mux = {
+ .clk = &periph2_clk,
+ .reg = CBCDR,
+ .bp = BP_CBCDR_PERIPH2_CLK_SEL,
+ .bm = BM_CBCDR_PERIPH2_CLK_SEL,
+ .parents = {
+ &periph2_pre_clk,
+ &periph2_clk2_clk,
+ NULL
+ },
+};
+
+static struct multiplexer periph2_pre_mux = {
+ .clk = &periph2_pre_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PRE_PERIPH2_CLK_SEL,
+ .bm = BM_CBCMR_PRE_PERIPH2_CLK_SEL,
+ .parents = {
+ &pll2_bus,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ &pll2_200m,
+ NULL
+ },
+};
+
+static struct multiplexer periph2_clk2_mux = {
+ .clk = &periph2_clk2_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PERIPH2_CLK2_SEL,
+ .bm = BM_CBCMR_PERIPH2_CLK2_SEL,
+ .parents = {
+ &pll3_usb_otg,
+ &osc_clk,
+ NULL
+ },
+};
+
+static struct multiplexer gpu2d_axi_mux = {
+ .clk = &gpu2d_axi_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU2D_AXI_SEL,
+ .bm = BM_CBCMR_GPU2D_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &ahb_clk,
+ NULL
+ },
+};
+
+static struct multiplexer gpu3d_axi_mux = {
+ .clk = &gpu3d_axi_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU3D_AXI_SEL,
+ .bm = BM_CBCMR_GPU3D_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &ahb_clk,
+ NULL
+ },
+};
+
+static struct multiplexer gpu3d_core_mux = {
+ .clk = &gpu3d_core_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU3D_CORE_SEL,
+ .bm = BM_CBCMR_GPU3D_CORE_SEL,
+ .parents = {
+ &mmdc_ch0_axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_594m,
+ &pll2_pfd_400m,
+ NULL
+ },
+};
+
+static struct multiplexer gpu3d_shader_mux = {
+ .clk = &gpu3d_shader_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU3D_SHADER_SEL,
+ .bm = BM_CBCMR_GPU3D_SHADER_SEL,
+ .parents = {
+ &mmdc_ch0_axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_594m,
+ &pll3_pfd_720m,
+ NULL
+ },
+};
+
+static struct multiplexer pcie_axi_mux = {
+ .clk = &pcie_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PCIE_AXI_SEL,
+ .bm = BM_CBCMR_PCIE_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &ahb_clk,
+ NULL
+ },
+};
+
+static struct multiplexer vdo_axi_mux = {
+ .clk = &vdo_axi_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_VDO_AXI_SEL,
+ .bm = BM_CBCMR_VDO_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &ahb_clk,
+ NULL
+ },
+};
+
+static struct multiplexer vpu_axi_mux = {
+ .clk = &vpu_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_VPU_AXI_SEL,
+ .bm = BM_CBCMR_VPU_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ NULL
+ },
+};
+
+static struct multiplexer gpu2d_core_mux = {
+ .clk = &gpu2d_core_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU2D_CORE_SEL,
+ .bm = BM_CBCMR_GPU2D_CORE_SEL,
+ .parents = {
+ &axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_352m,
+ &pll2_pfd_400m,
+ NULL
+ },
+};
+
+#define DEF_SSI_MUX(id) \
+ static struct multiplexer ssi##id##_mux = { \
+ .clk = &ssi##id##_clk, \
+ .reg = CSCMR1, \
+ .bp = BP_CSCMR1_SSI##id##_SEL, \
+ .bm = BM_CSCMR1_SSI##id##_SEL, \
+ .parents = { \
+ &pll3_pfd_508m, \
+ &pll3_pfd_454m, \
+ &pll4_audio, \
+ NULL \
+ }, \
+ }
+
+DEF_SSI_MUX(1);
+DEF_SSI_MUX(2);
+DEF_SSI_MUX(3);
+
+#define DEF_USDHC_MUX(id) \
+ static struct multiplexer usdhc##id##_mux = { \
+ .clk = &usdhc##id##_clk, \
+ .reg = CSCMR1, \
+ .bp = BP_CSCMR1_USDHC##id##_SEL, \
+ .bm = BM_CSCMR1_USDHC##id##_SEL, \
+ .parents = { \
+ &pll2_pfd_400m, \
+ &pll2_pfd_352m, \
+ NULL \
+ }, \
+ }
+
+DEF_USDHC_MUX(1);
+DEF_USDHC_MUX(2);
+DEF_USDHC_MUX(3);
+DEF_USDHC_MUX(4);
+
+static struct multiplexer emi_mux = {
+ .clk = &emi_clk,
+ .reg = CSCMR1,
+ .bp = BP_CSCMR1_EMI_SEL,
+ .bm = BM_CSCMR1_EMI_SEL,
+ .parents = {
+ &axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ NULL
+ },
+};
+
+static struct multiplexer emi_slow_mux = {
+ .clk = &emi_slow_clk,
+ .reg = CSCMR1,
+ .bp = BP_CSCMR1_EMI_SLOW_SEL,
+ .bm = BM_CSCMR1_EMI_SLOW_SEL,
+ .parents = {
+ &axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ NULL
+ },
+};
+
+static struct multiplexer esai_mux = {
+ .clk = &esai_clk,
+ .reg = CSCMR2,
+ .bp = BP_CSCMR2_ESAI_SEL,
+ .bm = BM_CSCMR2_ESAI_SEL,
+ .parents = {
+ &pll4_audio,
+ &pll3_pfd_508m,
+ &pll3_pfd_454m,
+ &pll3_usb_otg,
+ NULL
+ },
+};
+
+#define DEF_LDB_DI_MUX(id) \
+ static struct multiplexer ldb_di##id##_mux = { \
+ .clk = &ldb_di##id##_clk, \
+ .reg = CS2CDR, \
+ .bp = BP_CS2CDR_LDB_DI##id##_SEL, \
+ .bm = BM_CS2CDR_LDB_DI##id##_SEL, \
+ .parents = { \
+ &pll5_video, \
+ &pll2_pfd_352m, \
+ &pll2_pfd_400m, \
+ &pll3_pfd_540m, \
+ &pll3_usb_otg, \
+ NULL \
+ }, \
+ }
+
+DEF_LDB_DI_MUX(0);
+DEF_LDB_DI_MUX(1);
+
+static struct multiplexer enfc_mux = {
+ .clk = &enfc_clk,
+ .reg = CS2CDR,
+ .bp = BP_CS2CDR_ENFC_SEL,
+ .bm = BM_CS2CDR_ENFC_SEL,
+ .parents = {
+ &pll2_pfd_352m,
+ &pll2_bus,
+ &pll3_usb_otg,
+ &pll2_pfd_400m,
+ NULL
+ },
+};
+
+static struct multiplexer spdif_mux = {
+ .clk = &spdif_clk,
+ .reg = CDCDR,
+ .bp = BP_CDCDR_SPDIF_SEL,
+ .bm = BM_CDCDR_SPDIF_SEL,
+ .parents = {
+ &pll4_audio,
+ &pll3_pfd_508m,
+ &pll3_pfd_454m,
+ &pll3_usb_otg,
+ NULL
+ },
+};
+
+static struct multiplexer asrc_serial_mux = {
+ .clk = &asrc_serial_clk,
+ .reg = CDCDR,
+ .bp = BP_CDCDR_ASRC_SERIAL_SEL,
+ .bm = BM_CDCDR_ASRC_SERIAL_SEL,
+ .parents = {
+ &pll4_audio,
+ &pll3_pfd_508m,
+ &pll3_pfd_454m,
+ &pll3_usb_otg,
+ NULL
+ },
+};
+
+static struct multiplexer hsi_tx_mux = {
+ .clk = &hsi_tx_clk,
+ .reg = CDCDR,
+ .bp = BP_CDCDR_HSI_TX_SEL,
+ .bm = BM_CDCDR_HSI_TX_SEL,
+ .parents = {
+ &pll3_120m,
+ &pll2_pfd_400m,
+ NULL
+ },
+};
+
+#define DEF_IPU_DI_PRE_MUX(r, i, d) \
+ static struct multiplexer ipu##i##_di##d##_pre_mux = { \
+ .clk = &ipu##i##_di##d##_pre_clk, \
+ .reg = r, \
+ .bp = BP_##r##_IPU##i##_DI##d##_PRE_SEL, \
+ .bm = BM_##r##_IPU##i##_DI##d##_PRE_SEL, \
+ .parents = { \
+ &mmdc_ch0_axi_clk, \
+ &pll3_usb_otg, \
+ &pll5_video, \
+ &pll2_pfd_352m, \
+ &pll2_pfd_400m, \
+ &pll3_pfd_540m, \
+ NULL \
+ }, \
+ }
+
+DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 0);
+DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 1);
+DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 0);
+DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 1);
+
+#define DEF_IPU_DI_MUX(r, i, d) \
+ static struct multiplexer ipu##i##_di##d##_mux = { \
+ .clk = &ipu##i##_di##d##_clk, \
+ .reg = r, \
+ .bp = BP_##r##_IPU##i##_DI##d##_SEL, \
+ .bm = BM_##r##_IPU##i##_DI##d##_SEL, \
+ .parents = { \
+ &ipu##i##_di##d##_pre_clk, \
+ &dummy_clk, \
+ &dummy_clk, \
+ &ldb_di0_clk, \
+ &ldb_di1_clk, \
+ NULL \
+ }, \
+ }
+
+DEF_IPU_DI_MUX(CHSCCDR, 1, 0);
+DEF_IPU_DI_MUX(CHSCCDR, 1, 1);
+DEF_IPU_DI_MUX(CSCDR2, 2, 0);
+DEF_IPU_DI_MUX(CSCDR2, 2, 1);
+
+#define DEF_IPU_MUX(id) \
+ static struct multiplexer ipu##id##_mux = { \
+ .clk = &ipu##id##_clk, \
+ .reg = CSCDR3, \
+ .bp = BP_CSCDR3_IPU##id##_HSP_SEL, \
+ .bm = BM_CSCDR3_IPU##id##_HSP_SEL, \
+ .parents = { \
+ &mmdc_ch0_axi_clk, \
+ &pll2_pfd_400m, \
+ &pll3_120m, \
+ &pll3_pfd_540m, \
+ NULL \
+ }, \
+ }
+
+DEF_IPU_MUX(1);
+DEF_IPU_MUX(2);
+
+static struct multiplexer *multiplexers[] = {
+ &axi_mux,
+ &periph_mux,
+ &periph_pre_mux,
+ &periph_clk2_mux,
+ &periph2_mux,
+ &periph2_pre_mux,
+ &periph2_clk2_mux,
+ &gpu2d_axi_mux,
+ &gpu3d_axi_mux,
+ &gpu3d_core_mux,
+ &gpu3d_shader_mux,
+ &pcie_axi_mux,
+ &vdo_axi_mux,
+ &vpu_axi_mux,
+ &gpu2d_core_mux,
+ &ssi1_mux,
+ &ssi2_mux,
+ &ssi3_mux,
+ &usdhc1_mux,
+ &usdhc2_mux,
+ &usdhc3_mux,
+ &usdhc4_mux,
+ &emi_mux,
+ &emi_slow_mux,
+ &esai_mux,
+ &ldb_di0_mux,
+ &ldb_di1_mux,
+ &enfc_mux,
+ &spdif_mux,
+ &asrc_serial_mux,
+ &hsi_tx_mux,
+ &ipu1_di0_pre_mux,
+ &ipu1_di0_mux,
+ &ipu1_di1_pre_mux,
+ &ipu1_di1_mux,
+ &ipu2_di0_pre_mux,
+ &ipu2_di0_mux,
+ &ipu2_di1_pre_mux,
+ &ipu2_di1_mux,
+ &ipu1_mux,
+ &ipu2_mux,
+};
+
+static int _clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct multiplexer *m;
+ int i, num;
+ u32 val;
+
+ num = ARRAY_SIZE(multiplexers);
+ for (i = 0; i < num; i++)
+ if (multiplexers[i]->clk == clk) {
+ m = multiplexers[i];
+ break;
+ }
+ if (i == num)
+ return -EINVAL;
+
+ i = 0;
+ while (m->parents[i]) {
+ if (parent == m->parents[i])
+ break;
+ i++;
+ }
+ if (!m->parents[i])
+ return -EINVAL;
+
+ val = readl_relaxed(m->reg);
+ val &= ~m->bm;
+ val |= i << m->bp;
+ writel_relaxed(val, m->reg);
+
+ if (clk == &periph_clk)
+ return clk_busy_wait(clk);
+
+ return 0;
+}
+
+#define DEF_NG_CLK(name, p) \
+ static struct clk name = { \
+ .get_rate = _clk_get_rate, \
+ .set_rate = _clk_set_rate, \
+ .round_rate = _clk_round_rate, \
+ .set_parent = _clk_set_parent, \
+ .parent = p, \
+ }
+
+DEF_NG_CLK(periph_clk2_clk, &osc_clk);
+DEF_NG_CLK(periph_pre_clk, &pll2_bus);
+DEF_NG_CLK(periph_clk, &periph_pre_clk);
+DEF_NG_CLK(periph2_clk2_clk, &osc_clk);
+DEF_NG_CLK(periph2_pre_clk, &pll2_bus);
+DEF_NG_CLK(periph2_clk, &periph2_pre_clk);
+DEF_NG_CLK(axi_clk, &periph_clk);
+DEF_NG_CLK(emi_clk, &axi_clk);
+DEF_NG_CLK(arm_clk, &pll1_sw_clk);
+DEF_NG_CLK(ahb_clk, &periph_clk);
+DEF_NG_CLK(ipg_clk, &ahb_clk);
+DEF_NG_CLK(ipg_perclk, &ipg_clk);
+DEF_NG_CLK(ipu1_di0_pre_clk, &pll3_pfd_540m);
+DEF_NG_CLK(ipu1_di1_pre_clk, &pll3_pfd_540m);
+DEF_NG_CLK(ipu2_di0_pre_clk, &pll3_pfd_540m);
+DEF_NG_CLK(ipu2_di1_pre_clk, &pll3_pfd_540m);
+DEF_NG_CLK(asrc_serial_clk, &pll3_usb_otg);
+
+#define DEF_CLK(name, er, es, p, s) \
+ static struct clk name = { \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .enable = _clk_enable, \
+ .disable = _clk_disable, \
+ .get_rate = _clk_get_rate, \
+ .set_rate = _clk_set_rate, \
+ .round_rate = _clk_round_rate, \
+ .set_parent = _clk_set_parent, \
+ .parent = p, \
+ .secondary = s, \
+ }
+
+DEF_CLK(aips_tz1_clk, CCGR0, CG0, &ahb_clk, NULL);
+DEF_CLK(aips_tz2_clk, CCGR0, CG1, &ahb_clk, NULL);
+DEF_CLK(apbh_dma_clk, CCGR0, CG2, &ahb_clk, NULL);
+DEF_CLK(asrc_clk, CCGR0, CG3, &pll4_audio, NULL);
+DEF_CLK(can1_serial_clk, CCGR0, CG8, &pll3_usb_otg, NULL);
+DEF_CLK(can1_clk, CCGR0, CG7, &pll3_usb_otg, &can1_serial_clk);
+DEF_CLK(can2_serial_clk, CCGR0, CG10, &pll3_usb_otg, NULL);
+DEF_CLK(can2_clk, CCGR0, CG9, &pll3_usb_otg, &can2_serial_clk);
+DEF_CLK(ecspi1_clk, CCGR1, CG0, &pll3_60m, NULL);
+DEF_CLK(ecspi2_clk, CCGR1, CG1, &pll3_60m, NULL);
+DEF_CLK(ecspi3_clk, CCGR1, CG2, &pll3_60m, NULL);
+DEF_CLK(ecspi4_clk, CCGR1, CG3, &pll3_60m, NULL);
+DEF_CLK(ecspi5_clk, CCGR1, CG4, &pll3_60m, NULL);
+DEF_CLK(enet_clk, CCGR1, CG5, &ipg_clk, NULL);
+DEF_CLK(esai_clk, CCGR1, CG8, &pll3_usb_otg, NULL);
+DEF_CLK(gpt_serial_clk, CCGR1, CG11, &ipg_perclk, NULL);
+DEF_CLK(gpt_clk, CCGR1, CG10, &ipg_perclk, &gpt_serial_clk);
+DEF_CLK(gpu2d_core_clk, CCGR1, CG12, &pll2_pfd_352m, &gpu2d_axi_clk);
+DEF_CLK(gpu3d_core_clk, CCGR1, CG13, &pll2_pfd_594m, &gpu3d_axi_clk);
+DEF_CLK(gpu3d_shader_clk, CCGR1, CG13, &pll3_pfd_720m, &gpu3d_axi_clk);
+DEF_CLK(hdmi_iahb_clk, CCGR2, CG0, &ahb_clk, NULL);
+DEF_CLK(hdmi_isfr_clk, CCGR2, CG2, &pll3_pfd_540m, &hdmi_iahb_clk);
+DEF_CLK(i2c1_clk, CCGR2, CG3, &ipg_perclk, NULL);
+DEF_CLK(i2c2_clk, CCGR2, CG4, &ipg_perclk, NULL);
+DEF_CLK(i2c3_clk, CCGR2, CG5, &ipg_perclk, NULL);
+DEF_CLK(iim_clk, CCGR2, CG6, &ipg_clk, NULL);
+DEF_CLK(enfc_clk, CCGR2, CG7, &pll2_pfd_352m, NULL);
+DEF_CLK(ipu1_clk, CCGR3, CG0, &mmdc_ch0_axi_clk, NULL);
+DEF_CLK(ipu1_di0_clk, CCGR3, CG1, &ipu1_di0_pre_clk, NULL);
+DEF_CLK(ipu1_di1_clk, CCGR3, CG2, &ipu1_di1_pre_clk, NULL);
+DEF_CLK(ipu2_clk, CCGR3, CG3, &mmdc_ch0_axi_clk, NULL);
+DEF_CLK(ipu2_di0_clk, CCGR3, CG4, &ipu2_di0_pre_clk, NULL);
+DEF_CLK(ipu2_di1_clk, CCGR3, CG5, &ipu2_di1_pre_clk, NULL);
+DEF_CLK(ldb_di0_clk, CCGR3, CG6, &pll3_pfd_540m, NULL);
+DEF_CLK(ldb_di1_clk, CCGR3, CG7, &pll3_pfd_540m, NULL);
+DEF_CLK(hsi_tx_clk, CCGR3, CG8, &pll2_pfd_400m, NULL);
+DEF_CLK(mlb_clk, CCGR3, CG9, &pll6_mlb, NULL);
+DEF_CLK(mmdc_ch0_ipg_clk, CCGR3, CG12, &ipg_clk, NULL);
+DEF_CLK(mmdc_ch0_axi_clk, CCGR3, CG10, &periph_clk, &mmdc_ch0_ipg_clk);
+DEF_CLK(mmdc_ch1_ipg_clk, CCGR3, CG13, &ipg_clk, NULL);
+DEF_CLK(mmdc_ch1_axi_clk, CCGR3, CG11, &periph2_clk, &mmdc_ch1_ipg_clk);
+DEF_CLK(openvg_axi_clk, CCGR3, CG13, &axi_clk, NULL);
+DEF_CLK(pwm1_clk, CCGR4, CG8, &ipg_perclk, NULL);
+DEF_CLK(pwm2_clk, CCGR4, CG9, &ipg_perclk, NULL);
+DEF_CLK(pwm3_clk, CCGR4, CG10, &ipg_perclk, NULL);
+DEF_CLK(pwm4_clk, CCGR4, CG11, &ipg_perclk, NULL);
+DEF_CLK(gpmi_bch_apb_clk, CCGR4, CG12, &usdhc3_clk, NULL);
+DEF_CLK(gpmi_bch_clk, CCGR4, CG13, &usdhc4_clk, &gpmi_bch_apb_clk);
+DEF_CLK(gpmi_apb_clk, CCGR4, CG15, &usdhc3_clk, &gpmi_bch_clk);
+DEF_CLK(gpmi_io_clk, CCGR4, CG14, &enfc_clk, &gpmi_apb_clk);
+DEF_CLK(sdma_clk, CCGR5, CG3, &ahb_clk, NULL);
+DEF_CLK(spba_clk, CCGR5, CG6, &ipg_clk, NULL);
+DEF_CLK(spdif_clk, CCGR5, CG7, &pll3_usb_otg, &spba_clk);
+DEF_CLK(ssi1_clk, CCGR5, CG9, &pll3_pfd_508m, NULL);
+DEF_CLK(ssi2_clk, CCGR5, CG10, &pll3_pfd_508m, NULL);
+DEF_CLK(ssi3_clk, CCGR5, CG11, &pll3_pfd_508m, NULL);
+DEF_CLK(uart_serial_clk, CCGR5, CG13, &pll3_usb_otg, NULL);
+DEF_CLK(uart_clk, CCGR5, CG12, &pll3_80m, &uart_serial_clk);
+DEF_CLK(usboh3_clk, CCGR6, CG0, &ipg_clk, NULL);
+DEF_CLK(usdhc1_clk, CCGR6, CG1, &pll2_pfd_400m, NULL);
+DEF_CLK(usdhc2_clk, CCGR6, CG2, &pll2_pfd_400m, NULL);
+DEF_CLK(usdhc3_clk, CCGR6, CG3, &pll2_pfd_400m, NULL);
+DEF_CLK(usdhc4_clk, CCGR6, CG4, &pll2_pfd_400m, NULL);
+DEF_CLK(emi_slow_clk, CCGR6, CG5, &axi_clk, NULL);
+DEF_CLK(vdo_axi_clk, CCGR6, CG6, &axi_clk, NULL);
+DEF_CLK(vpu_clk, CCGR6, CG7, &axi_clk, NULL);
+
+static int pcie_clk_enable(struct clk *clk)
+{
+ u32 val;
+
+ val = readl_relaxed(PLL8_ENET);
+ val |= BM_PLL_ENET_EN_PCIE;
+ writel_relaxed(val, PLL8_ENET);
+
+ return _clk_enable(clk);
+}
+
+static void pcie_clk_disable(struct clk *clk)
+{
+ u32 val;
+
+ _clk_disable(clk);
+
+ val = readl_relaxed(PLL8_ENET);
+ val &= BM_PLL_ENET_EN_PCIE;
+ writel_relaxed(val, PLL8_ENET);
+}
+
+static struct clk pcie_clk = {
+ .enable_reg = CCGR4,
+ .enable_shift = CG0,
+ .enable = pcie_clk_enable,
+ .disable = pcie_clk_disable,
+ .set_parent = _clk_set_parent,
+ .parent = &axi_clk,
+ .secondary = &pll8_enet,
+};
+
+static int sata_clk_enable(struct clk *clk)
+{
+ u32 val;
+
+ val = readl_relaxed(PLL8_ENET);
+ val |= BM_PLL_ENET_EN_SATA;
+ writel_relaxed(val, PLL8_ENET);
+
+ return _clk_enable(clk);
+}
+
+static void sata_clk_disable(struct clk *clk)
+{
+ u32 val;
+
+ _clk_disable(clk);
+
+ val = readl_relaxed(PLL8_ENET);
+ val &= BM_PLL_ENET_EN_SATA;
+ writel_relaxed(val, PLL8_ENET);
+}
+
+static struct clk sata_clk = {
+ .enable_reg = CCGR5,
+ .enable_shift = CG2,
+ .enable = sata_clk_enable,
+ .disable = sata_clk_disable,
+ .parent = &ipg_clk,
+ .secondary = &pll8_enet,
+};
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ }
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK("2020000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("21e8000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("21ec000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("21f0000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("21f4000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("2188000.enet", NULL, enet_clk),
+ _REGISTER_CLOCK("2190000.usdhc", NULL, usdhc1_clk),
+ _REGISTER_CLOCK("2194000.usdhc", NULL, usdhc2_clk),
+ _REGISTER_CLOCK("2198000.usdhc", NULL, usdhc3_clk),
+ _REGISTER_CLOCK("219c000.usdhc", NULL, usdhc4_clk),
+ _REGISTER_CLOCK("21a0000.i2c", NULL, i2c1_clk),
+ _REGISTER_CLOCK("21a4000.i2c", NULL, i2c2_clk),
+ _REGISTER_CLOCK("21a8000.i2c", NULL, i2c3_clk),
+ _REGISTER_CLOCK("2008000.ecspi", NULL, ecspi1_clk),
+ _REGISTER_CLOCK("200c000.ecspi", NULL, ecspi2_clk),
+ _REGISTER_CLOCK("2010000.ecspi", NULL, ecspi3_clk),
+ _REGISTER_CLOCK("2014000.ecspi", NULL, ecspi4_clk),
+ _REGISTER_CLOCK("2018000.ecspi", NULL, ecspi5_clk),
+ _REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk),
+ _REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk),
+ _REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk),
+ _REGISTER_CLOCK(NULL, "ckih", ckih_clk),
+ _REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk),
+ _REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk),
+ _REGISTER_CLOCK(NULL, "aips_tz2_clk", aips_tz2_clk),
+ _REGISTER_CLOCK(NULL, "asrc_clk", asrc_clk),
+ _REGISTER_CLOCK(NULL, "can2_clk", can2_clk),
+ _REGISTER_CLOCK(NULL, "hdmi_isfr_clk", hdmi_isfr_clk),
+ _REGISTER_CLOCK(NULL, "iim_clk", iim_clk),
+ _REGISTER_CLOCK(NULL, "mlb_clk", mlb_clk),
+ _REGISTER_CLOCK(NULL, "openvg_axi_clk", openvg_axi_clk),
+ _REGISTER_CLOCK(NULL, "pwm1_clk", pwm1_clk),
+ _REGISTER_CLOCK(NULL, "pwm2_clk", pwm2_clk),
+ _REGISTER_CLOCK(NULL, "pwm3_clk", pwm3_clk),
+ _REGISTER_CLOCK(NULL, "pwm4_clk", pwm4_clk),
+ _REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk),
+ _REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk),
+ _REGISTER_CLOCK(NULL, "sata_clk", sata_clk),
+};
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+ u32 val = readl_relaxed(CLPCR);
+
+ val &= ~BM_CLPCR_LPM;
+ switch (mode) {
+ case WAIT_CLOCKED:
+ break;
+ case WAIT_UNCLOCKED:
+ val |= 0x1 << BP_CLPCR_LPM;
+ break;
+ case STOP_POWER_ON:
+ val |= 0x2 << BP_CLPCR_LPM;
+ break;
+ case WAIT_UNCLOCKED_POWER_OFF:
+ val |= 0x1 << BP_CLPCR_LPM;
+ val &= ~BM_CLPCR_VSTBY;
+ val &= ~BM_CLPCR_SBYOS;
+ val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+ break;
+ case STOP_POWER_OFF:
+ val |= 0x2 << BP_CLPCR_LPM;
+ val |= 0x3 << BP_CLPCR_STBY_COUNT;
+ val |= BM_CLPCR_VSTBY;
+ val |= BM_CLPCR_SBYOS;
+ val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+ break;
+ default:
+ return -EINVAL;
+ }
+ writel_relaxed(val, CLPCR);
+
+ return 0;
+}
+
+static struct map_desc imx6q_clock_desc[] = {
+ imx_map_entry(MX6Q, CCM, MT_DEVICE),
+ imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
+};
+
+int __init mx6q_clocks_init(void)
+{
+ struct device_node *np;
+ void __iomem *base;
+ int i, irq;
+
+ iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ u32 rate;
+ if (of_property_read_u32(np, "clock-frequency", &rate))
+ continue;
+
+ if (of_device_is_compatible(np, "fsl,imx6q-clkl"))
+ external_low_reference = rate;
+ else if (of_device_is_compatible(np, "fsl,imx6q-clkh"))
+ external_high_reference = rate;
+ else if (of_device_is_compatible(np, "fsl,imx6q-osc"))
+ oscillator_reference = rate;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ /* only keep necessary clocks on */
+ writel_relaxed(0x3 << CG0 | 0x3 << CG1 | 0x3 << CG2, CCGR0);
+ writel_relaxed(0x3 << CG8 | 0x3 << CG9 | 0x3 << CG10, CCGR2);
+ writel_relaxed(0x3 << CG10 | 0x3 << CG12, CCGR3);
+ writel_relaxed(0x3 << CG4 | 0x3 << CG6 | 0x3 << CG7, CCGR4);
+ writel_relaxed(0x3 << CG0, CCGR5);
+ writel_relaxed(0, CCGR6);
+ writel_relaxed(0, CCGR7);
+
+ clk_enable(&uart_clk);
+ clk_enable(&mmdc_ch0_axi_clk);
+
+ clk_set_rate(&pll4_audio, FREQ_650M);
+ clk_set_rate(&pll5_video, FREQ_650M);
+ clk_set_parent(&ipu1_di0_clk, &ipu1_di0_pre_clk);
+ clk_set_parent(&ipu1_di0_pre_clk, &pll5_video);
+ clk_set_parent(&gpu3d_shader_clk, &pll2_pfd_594m);
+ clk_set_rate(&gpu3d_shader_clk, FREQ_594M);
+ clk_set_parent(&gpu3d_core_clk, &mmdc_ch0_axi_clk);
+ clk_set_rate(&gpu3d_core_clk, FREQ_528M);
+ clk_set_parent(&asrc_serial_clk, &pll3_usb_otg);
+ clk_set_rate(&asrc_serial_clk, 1500000);
+ clk_set_rate(&enfc_clk, 11000000);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ irq = irq_of_parse_and_map(np, 0);
+ mxc_timer_init(&gpt_clk, base, irq);
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
new file mode 100644
index 0000000..e1537f9
--- /dev/null
+++ b/arch/arm/mach-imx/gpc.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later@the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/hardware/gic.h>
+
+#define GPC_IMR1 0x008
+#define GPC_PGC_CPU_PDN 0x2a0
+
+#define IMR_NUM 4
+
+static void __iomem *gpc_base;
+static u32 gpc_wake_irqs[IMR_NUM];
+static u32 gpc_saved_imrs[IMR_NUM];
+
+void imx_gpc_pre_suspend(void)
+{
+ void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+ int i;
+
+ /* Tell GPC to power off ARM core when suspend */
+ writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
+
+ for (i = 0; i < IMR_NUM; i++) {
+ gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
+ writel_relaxed(~gpc_wake_irqs[i], reg_imr1 + i * 4);
+ }
+}
+
+void imx_gpc_post_resume(void)
+{
+ void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+ int i;
+
+ /* Keep ARM core powered on for other low-power modes */
+ writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN);
+
+ for (i = 0; i < IMR_NUM; i++)
+ writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
+}
+
+static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+ unsigned int idx = d->irq / 32 - 1;
+ u32 mask;
+
+ /* Sanity check for SPI irq */
+ if (d->irq < 32)
+ return -EINVAL;
+
+ mask = 1 << d->irq % 32;
+ gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
+ gpc_wake_irqs[idx] & ~mask;
+
+ return 0;
+}
+
+static void imx_gpc_irq_unmask(struct irq_data *d)
+{
+ void __iomem *reg;
+ u32 val;
+
+ /* Sanity check for SPI irq */
+ if (d->irq < 32)
+ return;
+
+ reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+ val = readl_relaxed(reg);
+ val &= ~(1 << d->irq % 32);
+ writel_relaxed(val, reg);
+}
+
+static void imx_gpc_irq_mask(struct irq_data *d)
+{
+ void __iomem *reg;
+ u32 val;
+
+ /* Sanity check for SPI irq */
+ if (d->irq < 32)
+ return;
+
+ reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+ val = readl_relaxed(reg);
+ val |= 1 << (d->irq % 32);
+ writel_relaxed(val, reg);
+}
+
+void __init imx_gpc_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
+ gpc_base = of_iomap(np, 0);
+ WARN_ON(!gpc_base);
+
+ /* Register GPC as the secondary interrupt controller behind GIC */
+ gic_arch_extn.irq_mask = imx_gpc_irq_mask;
+ gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
+ gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
+}
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
new file mode 100644
index 0000000..2103a175
--- /dev/null
+++ b/arch/arm/mach-imx/mmdc.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+
+#define MMDC_MAPSR 0x404
+#define BP_MMDC_MAPSR_PSD 0
+#define BP_MMDC_MAPSR_PSS 4
+
+static int __devinit imx_mmdc_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ void __iomem *mmdc_base, *reg;
+ u32 val;
+ int timeout = 0x400;
+
+ mmdc_base = of_iomap(np, 0);
+ WARN_ON(!mmdc_base);
+
+ reg = mmdc_base + MMDC_MAPSR;
+
+ /* Enable automatic power saving */
+ val = readl_relaxed(reg);
+ val &= ~(1 << BP_MMDC_MAPSR_PSD);
+ writel_relaxed(val, reg);
+
+ /* Ensure it's successfully enabled */
+ while (!(readl_relaxed(reg) & 1 << BP_MMDC_MAPSR_PSS) && --timeout)
+ cpu_relax();
+
+ if (unlikely(!timeout)) {
+ pr_warn("%s: failed to enable automatic power saving\n",
+ __func__);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static struct of_device_id imx_mmdc_dt_ids[] = {
+ { .compatible = "fsl,imx6q-mmdc", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver imx_mmdc_driver = {
+ .driver = {
+ .name = "imx-mmdc",
+ .owner = THIS_MODULE,
+ .of_match_table = imx_mmdc_dt_ids,
+ },
+ .probe = imx_mmdc_probe,
+};
+
+static int __init imx_mmdc_init(void)
+{
+ return platform_driver_register(&imx_mmdc_driver);
+}
+postcore_initcall(imx_mmdc_init);
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
new file mode 100644
index 0000000..36cacbd
--- /dev/null
+++ b/arch/arm/mach-imx/src.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later@the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/unified.h>
+
+#define SRC_SCR 0x000
+#define SRC_GPR1 0x020
+#define BP_SRC_SCR_CORE1_RST 14
+#define BP_SRC_SCR_CORE1_ENABLE 22
+
+static void __iomem *src_base;
+
+void imx_enable_cpu(int cpu, bool enable)
+{
+ u32 mask, val;
+
+ mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
+ val = readl_relaxed(src_base + SRC_SCR);
+ val = enable ? val | mask : val & ~mask;
+ writel_relaxed(val, src_base + SRC_SCR);
+}
+
+void imx_set_cpu_jump(int cpu, void *jump_addr)
+{
+ writel_relaxed(BSYM(virt_to_phys(jump_addr)),
+ src_base + SRC_GPR1 + cpu * 8);
+}
+
+void __init imx_src_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
+ src_base = of_iomap(np, 0);
+ WARN_ON(!src_base);
+}
--
1.7.4.1
^ permalink raw reply related
* [PATCH v3 4/6] arm/imx6q: add smp and cpu hotplug support
From: Shawn Guo @ 2011-09-26 7:20 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1317021651-17359-1-git-send-email-shawn.guo@linaro.org>
It adds smp and cpu hotplug support for imx6q.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/Kconfig | 1 +
arch/arm/mach-imx/Makefile | 4 ++
arch/arm/mach-imx/head-v7.S | 71 ++++++++++++++++++++++++++
arch/arm/mach-imx/hotplug.c | 44 ++++++++++++++++
arch/arm/mach-imx/localtimer.c | 35 +++++++++++++
arch/arm/mach-imx/platsmp.c | 85 +++++++++++++++++++++++++++++++
arch/arm/plat-mxc/include/mach/common.h | 5 ++
7 files changed, 245 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-imx/head-v7.S
create mode 100644 arch/arm/mach-imx/hotplug.c
create mode 100644 arch/arm/mach-imx/localtimer.c
create mode 100644 arch/arm/mach-imx/platsmp.c
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index af73b3e..6ec758d 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -623,6 +623,7 @@ config SOC_IMX6Q
bool "i.MX6 Quad support"
select ARM_GIC
select CPU_V7
+ select HAVE_ARM_SCU
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 8c21fda..d46b2e7 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -66,4 +66,8 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+obj-$(CONFIG_CPU_V7) += head-v7.o
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o
diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/head-v7.S
new file mode 100644
index 0000000..ede908b
--- /dev/null
+++ b/arch/arm/mach-imx/head-v7.S
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/hardware/cache-l2x0.h>
+
+ .section ".text.head", "ax"
+ __CPUINIT
+
+/*
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor. We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S.
+ */
+ENTRY(v7_invalidate_l1)
+ mov r0, #0
+ mcr p15, 2, r0, c0, c0, 0
+ mrc p15, 1, r0, c0, c0, 0
+
+ ldr r1, =0x7fff
+ and r2, r1, r0, lsr #13
+
+ ldr r1, =0x3ff
+
+ and r3, r1, r0, lsr #3 @ NumWays - 1
+ add r2, r2, #1 @ NumSets
+
+ and r0, r0, #0x7
+ add r0, r0, #4 @ SetShift
+
+ clz r1, r3 @ WayShift
+ add r4, r3, #1 @ NumWays
+1: sub r2, r2, #1 @ NumSets--
+ mov r3, r4 @ Temp = NumWays
+2: subs r3, r3, #1 @ Temp--
+ mov r5, r3, lsl r1
+ mov r6, r2, lsl r0
+ orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+ mcr p15, 0, r5, c7, c6, 2
+ bgt 2b
+ cmp r2, #0
+ bgt 1b
+ dsb
+ isb
+ mov pc, lr
+ENDPROC(v7_invalidate_l1)
+
+#ifdef CONFIG_SMP
+ENTRY(v7_secondary_startup)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(v7_secondary_startup)
+#endif
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
new file mode 100644
index 0000000..89493ab
--- /dev/null
+++ b/arch/arm/mach-imx/hotplug.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later@the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/errno.h>
+#include <asm/cacheflush.h>
+#include <mach/common.h>
+
+int platform_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+ flush_cache_all();
+ imx_enable_cpu(cpu, false);
+ cpu_do_idle();
+
+ /* We should never return from idle */
+ panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+ /*
+ * we don't allow CPU 0 to be shutdown (it is still too special
+ * e.g. clock tick interrupts)
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-imx/localtimer.c b/arch/arm/mach-imx/localtimer.c
new file mode 100644
index 0000000..3a16351
--- /dev/null
+++ b/arch/arm/mach-imx/localtimer.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/smp_twd.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
+ if (!twd_base) {
+ twd_base = of_iomap(np, 0);
+ WARN_ON(!twd_base);
+ }
+ evt->irq = irq_of_parse_and_map(np, 0);
+ twd_timer_setup(evt);
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
new file mode 100644
index 0000000..ab98c6f
--- /dev/null
+++ b/arch/arm/mach-imx/platsmp.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/page.h>
+#include <asm/smp_scu.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static void __iomem *scu_base;
+
+static struct map_desc scu_io_desc __initdata = {
+ /* .virtual and .pfn are run-time assigned */
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+};
+
+void __init imx_scu_map_io(void)
+{
+ unsigned long base;
+
+ /* Get SCU base */
+ asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+ scu_io_desc.virtual = IMX_IO_P2V(base);
+ scu_io_desc.pfn = __phys_to_pfn(base);
+ iotable_init(&scu_io_desc, 1);
+
+ scu_base = IMX_IO_ADDRESS(base);
+}
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ gic_secondary_init(0);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ imx_set_cpu_jump(cpu, v7_secondary_startup);
+ imx_enable_cpu(cpu, true);
+ return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+ int i, ncores;
+
+ ncores = scu_get_core_count(scu_base);
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
+}
+
+void imx_smp_prepare(void)
+{
+ scu_enable(scu_base);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+ imx_smp_prepare();
+}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 49cad2a..5b24f5d 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -88,4 +88,9 @@ void gic_handle_irq(struct pt_regs *);
#define mx53_handle_irq tzic_handle_irq
#define imx6q_handle_irq gic_handle_irq
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+#ifdef CONFIG_SMP
+extern void v7_secondary_startup(void);
+#endif
#endif
--
1.7.4.1
^ permalink raw reply related
* [PATCH v3 5/6] arm/imx6q: add device tree machine support
From: Shawn Guo @ 2011-09-26 7:20 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1317021651-17359-1-git-send-email-shawn.guo@linaro.org>
It adds generic device tree based machine support for imx6q.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/Makefile | 2 +-
arch/arm/mach-imx/mach-imx6q.c | 84 +++++++++++++++++++++++++++++++
arch/arm/mm/Kconfig | 2 +-
arch/arm/plat-mxc/include/mach/common.h | 13 +++++
4 files changed, 99 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-imx/mach-imx6q.c
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index d46b2e7..16737ba 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -70,4 +70,4 @@ obj-$(CONFIG_CPU_V7) += head-v7.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
-obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
new file mode 100644
index 0000000..8bf5fa3
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static void __init imx6q_init_machine(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ imx6q_pm_init();
+}
+
+static void __init imx6q_map_io(void)
+{
+ imx_lluart_map_io();
+ imx_scu_map_io();
+}
+
+static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+ 32 * 7; /* imx6q gets 7 gpio ports */
+
+ irq_domain_add_simple(np, gpio_irq_base);
+ gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx6q_irq_match[] __initconst = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ { .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, },
+ { /* sentinel */ }
+};
+
+static void __init imx6q_init_irq(void)
+{
+ l2x0_of_init(0, ~0UL);
+ imx_src_init();
+ imx_gpc_init();
+ of_irq_init(imx6q_irq_match);
+}
+
+static void __init imx6q_timer_init(void)
+{
+ mx6q_clocks_init();
+}
+
+static struct sys_timer imx6q_timer = {
+ .init = imx6q_timer_init,
+};
+
+static const char *imx6q_dt_compat[] __initdata = {
+ "fsl,imx6q-sabreauto",
+ NULL,
+};
+
+DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+ .map_io = imx6q_map_io,
+ .init_irq = imx6q_init_irq,
+ .handle_irq = imx6q_handle_irq,
+ .timer = &imx6q_timer,
+ .init_machine = imx6q_init_machine,
+ .dt_compat = imx6q_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 88633fe..c3ce146 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -822,7 +822,7 @@ config CACHE_L2X0
REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
- ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX
+ ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_MX6
default y
select OUTER_CACHE
select OUTER_CACHE_SYNC
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 5b24f5d..2c2eafa 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -64,6 +64,7 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
+extern int mx6q_clocks_init(void);
extern struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
extern int mxc_register_device(struct platform_device *pdev, void *data);
@@ -90,7 +91,19 @@ void gic_handle_irq(struct pt_regs *);
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+#ifdef CONFIG_DEBUG_LL
+extern void imx_lluart_map_io(void);
+#else
+static inline void imx_lluart_map_io(void) {}
+#endif
#ifdef CONFIG_SMP
extern void v7_secondary_startup(void);
+extern void imx_scu_map_io(void);
+#else
+static inline void imx_scu_map_io(void) {}
#endif
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern void imx_src_init(void);
+extern void imx_gpc_init(void);
#endif
--
1.7.4.1
^ permalink raw reply related
* [PATCH v3 6/6] arm/imx6q: add suspend/resume support
From: Shawn Guo @ 2011-09-26 7:20 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1317021651-17359-1-git-send-email-shawn.guo@linaro.org>
It adds suspend/resume support for imx6q.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/Makefile | 2 +-
arch/arm/mach-imx/head-v7.S | 32 +++++++++++
arch/arm/mach-imx/pm-imx6q.c | 90 +++++++++++++++++++++++++++++++
arch/arm/plat-mxc/include/mach/common.h | 9 +++
4 files changed, 132 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-imx/pm-imx6q.c
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 16737ba..c787151 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -70,4 +70,4 @@ obj-$(CONFIG_CPU_V7) += head-v7.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
-obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o
diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/head-v7.S
index ede908b..1f6316c 100644
--- a/arch/arm/mach-imx/head-v7.S
+++ b/arch/arm/mach-imx/head-v7.S
@@ -69,3 +69,35 @@ ENTRY(v7_secondary_startup)
b secondary_startup
ENDPROC(v7_secondary_startup)
#endif
+
+ENTRY(pl310_get_save_ptr)
+ ldr r0, =pl310_pbase
+ mov pc, lr
+ENDPROC(pl310_get_save_ptr)
+
+/*
+ * The following code is located into the .data section. This is to
+ * allow pl310_pbase and pl310_aux_ctrl to be accessed with a relative
+ * load as we are running on physical address here.
+ */
+ .data
+ .align
+
+ .macro pl310_resume
+ adr r2, pl310_pbase
+ ldmia r2, {r0, r1}
+ str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
+ mov r1, #0x1
+ str r1, [r0, #L2X0_CTRL] @ re-enable L2
+ .endm
+
+ENTRY(v7_cpu_resume)
+ bl v7_invalidate_l1
+ pl310_resume
+ b cpu_resume
+ENDPROC(v7_cpu_resume)
+
+pl310_pbase:
+ .long 0
+pl310_aux_ctrl:
+ .long 0
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
new file mode 100644
index 0000000..db41343
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static int imx6q_suspend_finish(unsigned long val)
+{
+ cpu_do_idle();
+ return 0;
+}
+
+static int imx6q_pm_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ imx6q_set_lpm(STOP_POWER_OFF);
+ imx_gpc_pre_suspend();
+ imx_set_cpu_jump(0, v7_cpu_resume);
+ /* Zzz ... */
+ cpu_suspend(0, imx6q_suspend_finish);
+ imx_smp_prepare();
+ imx_gpc_post_resume();
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct platform_suspend_ops imx6q_pm_ops = {
+ .enter = imx6q_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+void __init imx6q_pm_init(void)
+{
+ struct device_node *np;
+ u32 reg[2], *ptr;
+ void __iomem *base;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
+ of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg));
+ base = ioremap(reg[0], reg[1]);
+ WARN_ON(!base);
+
+ /*
+ * On imx6q, during system suspend, ARM core gets powered off,
+ * but L2 cache is retained. To avoid cleaning the entire L2,
+ * we need to save L2 controller registers, and when system gets
+ * woke up, restore the registers and re-enable L2 before
+ * calling into cpu_resume().
+ *
+ * Most of pl310 configuration upon reset work just fine for
+ * imx6q, and the only one register we actually need to save is
+ * AUX_CTRL. Also since pl310 configuration won't change in a
+ * live system, we can save it here only once, and restore it
+ * every time system resumes back from v7_cpu_resume().
+ */
+ ptr = pl310_get_save_ptr();
+ /* save pl310 physical base address */
+ *ptr = reg[0];
+ /* save pl310 aux_ctrl register */
+ *(ptr + 1) = readl_relaxed(base + L2X0_AUX_CTRL);
+ /* ensure they are written into external memory */
+ __cpuc_flush_dcache_area((void *) ptr, sizeof(*ptr) * 2);
+ outer_clean_range(__pa(ptr), __pa(ptr + 2));
+
+ iounmap(base);
+
+ suspend_set_ops(&imx6q_pm_ops);
+}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 2c2eafa..96ba321 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -13,6 +13,7 @@
struct platform_device;
struct clk;
+enum mxc_cpu_pwr_mode;
extern void mx1_map_io(void);
extern void mx21_map_io(void);
@@ -96,14 +97,22 @@ extern void imx_lluart_map_io(void);
#else
static inline void imx_lluart_map_io(void) {}
#endif
+extern void v7_cpu_resume(void);
+extern u32 *pl310_get_save_ptr(void);
#ifdef CONFIG_SMP
extern void v7_secondary_startup(void);
extern void imx_scu_map_io(void);
+extern void imx_smp_prepare(void);
#else
static inline void imx_scu_map_io(void) {}
+static inline void imx_smp_prepare(void) {}
#endif
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
extern void imx_src_init(void);
extern void imx_gpc_init(void);
+extern void imx_gpc_pre_suspend(void);
+extern void imx_gpc_post_resume(void);
+extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+extern void imx6q_pm_init(void);
#endif
--
1.7.4.1
^ permalink raw reply related
* [patch] ARM: smpboot: Enable interrupts after marking CPU online/active
From: Amit Kachhap @ 2011-09-26 7:26 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20110923084001.GP17169@n2100.arm.linux.org.uk>
Hi Russell,
On 23 September 2011 14:10, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
> On Tue, Sep 13, 2011 at 06:53:12PM +0100, Russell King - ARM Linux wrote:
>> So, we must have the setting of CPU online _after_ we've setup the
>> scheduler domain information etc - so the following is a strict
>> ordering:
>>
>> 1. calibrate_delay()
>> 2. smp_store_cpu_info()
>> 3. set_cpu_online()
>>
>> Now, the question is do we need interrupts enabled to setup timers
>> via percpu_timer_setup() and calibrate delay. ?Can we move enabling
>> interrupts after smp_store_cpu_info(). ?IOW, instead of moving the
>> setting of cpu online before all this, can we move notify_cpu_starting()
>> and the enabling of _both_ interrupts after smp_store_cpu_info()...
>> No idea at the moment.
>
> And to make things worse... 4bd0fe1c78623062263cf5ae875fd484c5b8256d
> has appeared in mainline today.
>
> diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
> index 7c2282c..df6ef1b 100644
> --- a/arch/arm/mach-exynos4/platsmp.c
> +++ b/arch/arm/mach-exynos4/platsmp.c
> @@ -106,6 +106,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
> ? ? ? ? */
> ? ? ? ?spin_lock(&boot_lock);
> ? ? ? ?spin_unlock(&boot_lock);
> +
> + ? ? ? set_cpu_online(cpu, true);
> ?}
>
> ?int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
>
The above patch was added as a workaround fix for
5dfc54e087c15f823ee9b6541d2f0f314e69cbed (ARM: GIC: avoid routing
interrupts to offline CPUs).
Actually the main cause is that exynos4 uses external cpu timer and
hence irq_set_affinity is called inside percpu_timer_setup and this
will fail if secondary cpu is offline. I tried deferring
irq_set_affinity using cpu_online notifiers but this approach effects
bogomips calculation and looks complex also. So any suggestion on how
to handle this situation in exynos4?
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index ddd8686..30a7226 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/percpu.h>
+#include <linux/cpu.h>
#include <mach/map.h>
#include <mach/regs-mct.h>
@@ -354,6 +355,18 @@ static struct irqaction mct_tick1_event_irq = {
.handler = exynos4_mct_tick_isr,
};
+static int __cpuinit exynos4_set_affinity(struct notifier_block *self,
+ unsigned long action, void *cpu)
+{
+ if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN)
+ irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata exynos4_set_affinity_nb = {
+ .notifier_call = exynos4_set_affinity,
+};
+
static void exynos4_mct_tick_init(struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
@@ -390,7 +403,6 @@ static void exynos4_mct_tick_init(struct
clock_event_device *evt)
} else {
mct_tick1_event_irq.dev_id = &mct_tick[cpu];
setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
- irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
}
}
@@ -422,6 +434,7 @@ static void __init exynos4_timer_init(void)
exynos4_timer_resources();
exynos4_clocksource_init();
exynos4_clockevent_init();
+ register_cpu_notifier(&exynos4_set_affinity_nb);
}
struct sys_timer exynos4_timer = {
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index ca01370..8c0d74f 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -108,8 +108,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
*/
spin_lock(&boot_lock);
spin_unlock(&boot_lock);
-
- set_cpu_online(cpu, true);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
--
1.7.1
Thanks,
Amit D
> I think some work needs to be done to eliminate some of the dependencies
> in this code so that we can have a *sane* order for bringup of secondary
> CPUs.
>
> I'm just going to sit on the fence and watch what platform people do
> during the next merge window when the support for the topological
> scheduler goes in.
>
^ permalink raw reply related
* [PATCH v12 0/3] add the GPMI controller driver for IMX23/IMX28
From: Huang Shijie @ 2011-09-26 7:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20081.49563.934890.760378@ipc1.ka-ro>
Hi Lothar,
> Hi,
>
> Huang Shijie writes:
>> Hi,
>> add more CC.
>>> Hi,
>>>
>>> Huang Shijie writes:
>>>> The patch set is based on Artem's tree:
>>>> http://git.infradead.org/users/dedekind/l2-mtd-2.6.git
>>>>
>>>> The general-purpose media interface(GPMI) controller is a flexible interface
>>>> to up to several NAND flashs.
>>>>
>>>> The Bose Ray-Choudhury Hocquenghem(BCH) module is a hardware ECC accelerator.
>>>>
>>>> With the help of BCH, the GPMI controller can choose to do the hardware ECC or
>>>> not.
>>>>
>>>> This driver is a _pure_ MTD NAND controller driver now.
>>>>
>>>>
>>>> The driver depends on another GPMI-NAND device patch set, you can find them at :
>>>> [1] http://marc.info/?l=linux-arm-kernel&m=131416901319573&w=2
>>>> [2] http://marc.info/?l=linux-arm-kernel&m=131416912319668&w=2
>>>> [3] http://marc.info/?l=linux-arm-kernel&m=131416891119504&w=2
>>>> [4] http://marc.info/?l=linux-arm-kernel&m=131416896219539&w=2
>>>>
>>>> Test environment:
>>>> Using imx23 and imx28 boards for test.
>>>>
>>>> imx23 :
>>>> console=ttyAMA0,115200 mtdparts=gpmi-nfc:20m(boot),-(user)
>>>> Tested by USB boot and NAND boot.
>>>>
>>>> imx28 :
>>>> #console=ttyAMA0,115200 root=/dev/mmcblk0p3 rw rootwait
>>>> Tested by SD card boot mode.
>>>>
>>> How did you perform your tests?
>>>
>>> I tried this driver on our TX28 board with the result that with
>> The nand conflicats with SD card1. You will get the DMA timeout if you
>> use it.
>> Do you use sd card0 or sd card1?
>>
> I'm using the SSP0 port.
>
>> BTW:I tested the gpmi driver with SD card0. It works fine.
>>
> What exactly did you do in your test?
> Can you try the concurrent 'dd' commands that I used?
I tested the following :
#dd if=/dev/mmcblk0 > /dev/null
[943147.630000] mmcblk0: error -110 transferring data, sector 3972320, nr 256, cmd response 0x900, card status 0x80b00
[943147.640000] mmcblk0: retrying using single block read
[943158.250000] mmcblk0: error -110 transferring data, sector 3972480, nr 96, cmd response 0x900, card status 0x0
[943158.260000] end_request: I/O error, dev mmcblk0, sector 3972480
[943168.780000] mmcblk0: r/w command failed, status = 0x80900
[943168.790000] end_request: I/O error, dev mmcblk0, sector 3972481
[943168.790000] Buffer I/O error on device mmcblk0, logical block 496560
[943168.790000] end_request: I/O error, dev mmcblk0, sector 3972488
[943168.810000] Buffer I/O error on device mmcblk0, logical block 496561
[943168.810000] end_request: I/O error, dev mmcblk0, sector 3972496
[943168.810000] Buffer I/O error on device mmcblk0, logical block 496562
[943168.810000] end_request: I/O error, dev mmcblk0, sector 3972504
[943168.810000] Buffer I/O error on device mmcblk0, logical block 496563
[943168.810000] end_request: I/O error, dev mmcblk0, sector 3972512
[943168.810000] Buffer I/O error on device mmcblk0, logical block 496564
[943168.810000] end_request: I/O error, dev mmcblk0, sector 3972520
[943168.810000] Buffer I/O error on device mmcblk0, logical block 496565
[943168.810000] end_request: I/O error, dev mmcblk0, sector 3972528
[943168.810000] Buffer I/O error on device mmcblk0, logical block 496566
[943168.810000] end_request: I/O error, dev mmcblk0, sector 3972536
[943168.810000] Buffer I/O error on device mmcblk0, logical block 496567
[943168.810000] end_request: I/O error, dev mmcblk0, sector 3972544
[943168.810000] Buffer I/O error on device mmcblk0, logical block 496568
[943168.810000] end_request: I/O error, dev mmcblk0, sector 3972552
[943168.810000] end_request: I/O error, dev mmcblk0, sector 3972560
[943168.810000] end_request: I/O error, dev mmcblk0, sector 3972568
[943179.450000] mmcblk0: error -110 transferring data, sector 3972480, nr 8, cmd response 0x900, card status 0x80b00
[943179.460000] mmcblk0: retrying using single block read
[943189.990000] mmcblk0: error -110 transferring data, sector 3972480, nr 8, cmd response 0x900, card status 0x0
[943190.000000] end_request: I/O error, dev mmcblk0, sector 3972480
[943200.530000] mmcblk0: r/w command failed, status = 0x80900
[943200.530000] end_request: I/O error, dev mmcblk0, sector 3972481
[943200.530000] quiet_error: 3 callbacks suppressed
[943200.530000] Buffer I/O error on device mmcblk0, logical block 496560
dd: /dev/mmcblk0: Input/output error
root at freescale ~$
-------------------------------------------------------------------------------------------------
It seems only test the SD card also can reproduce the same DMA bug.
Best Regards
Huang Shijie
>
> Lothar Wa?mann
^ permalink raw reply
* [PATCH resend 00/13] McBSP cleanup and generalization
From: Jarkko Nikula @ 2011-09-26 7:45 UTC (permalink / raw)
To: linux-arm-kernel
This is just resend of patches 2-14/14 I posted earlier:
http://marc.info/?l=linux-omap&m=131480421332374&w=2
Patch 1/14 is already in linux-omap, Acked-by from Peter added and I
took freedom to thank Janusz by adding Tested-by line as he tested the
set on OMAP1.
Jarkko Nikula (13):
omap: mcbsp: Remove unused variables from platform data
omap: mcbsp: Move out omap_mcbsp_register_board_cfg from
plat-omap/devices.c
omap: mcbsp: Implement generic register access
omap: mcbsp: Make wakeup control generic
omap: mcbsp: Make tranceiver configuration control register access
generic
omap: mcbsp: Make threshold based transfer code generic
omap: mcbsp: Use per instance register cache size
omap: mcbsp: Move sidetone clock management to mach-omap2/mcbsp.c
omap: mcbsp: Cleanup sidetone control initialization and make it
generic
omap: mcbsp: Update mcbsp.h include dependencies
omap: mcbsp: Move address definitions to arch/arm/mach-omap1/mcbsp.c
omap: mcbsp: Start generalize omap2_mcbsp_set_clks_src
omap: mcbsp: Start generalize signal muxing functions
arch/arm/mach-omap1/mcbsp.c | 45 ++++
arch/arm/mach-omap2/mcbsp.c | 103 ++++++---
arch/arm/plat-omap/devices.c | 46 ----
arch/arm/plat-omap/include/plat/mcbsp.h | 208 ++++++------------
arch/arm/plat-omap/mcbsp.c | 358 ++++++++++++++-----------------
5 files changed, 342 insertions(+), 418 deletions(-)
--
1.7.6.3
^ permalink raw reply
* [PATCH resend 01/13] omap: mcbsp: Remove unused variables from platform data
From: Jarkko Nikula @ 2011-09-26 7:45 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1317023150-6730-1-git-send-email-jarkko.nikula@bitmer.com>
These variables got unused after McBSP was converted to use resource
structures.
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
---
arch/arm/plat-omap/include/plat/mcbsp.h | 7 -------
1 files changed, 0 insertions(+), 7 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 9882c65..8ab14d8 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -348,14 +348,7 @@ struct omap_mcbsp_ops {
};
struct omap_mcbsp_platform_data {
- unsigned long phys_base;
- u8 dma_rx_sync, dma_tx_sync;
- u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
-#ifdef CONFIG_ARCH_OMAP3
- /* Sidetone block for McBSP 2 and 3 */
- unsigned long phys_base_st;
-#endif
u16 buffer_size;
unsigned int mcbsp_config_type;
};
--
1.7.6.3
^ permalink raw reply related
* [PATCH resend 02/13] omap: mcbsp: Move out omap_mcbsp_register_board_cfg from plat-omap/devices.c
From: Jarkko Nikula @ 2011-09-26 7:45 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1317023150-6730-1-git-send-email-jarkko.nikula@bitmer.com>
Only OMAP1s are using omap_mcbsp_register_board_cfg after OMAP2+ hwmod
conversion so it can be moved to mach-omap1/mcbsp.c.
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
---
arch/arm/mach-omap1/mcbsp.c | 32 +++++++++++++++++++++
arch/arm/plat-omap/devices.c | 46 -------------------------------
arch/arm/plat-omap/include/plat/mcbsp.h | 2 -
3 files changed, 32 insertions(+), 48 deletions(-)
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index ab7395d..3c985ac 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -31,6 +31,7 @@
static int dsp_use;
static struct clk *api_clk;
static struct clk *dsp_clk;
+static struct platform_device **omap_mcbsp_devices;
static void omap1_mcbsp_request(unsigned int id)
{
@@ -369,6 +370,37 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
#define OMAP16XX_MCBSP_COUNT 0
#endif
+static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+ struct omap_mcbsp_platform_data *config, int size)
+{
+ int i;
+
+ omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
+ GFP_KERNEL);
+ if (!omap_mcbsp_devices) {
+ printk(KERN_ERR "Could not register McBSP devices\n");
+ return;
+ }
+
+ for (i = 0; i < size; i++) {
+ struct platform_device *new_mcbsp;
+ int ret;
+
+ new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
+ if (!new_mcbsp)
+ continue;
+ platform_device_add_resources(new_mcbsp, &res[i * res_count],
+ res_count);
+ new_mcbsp->dev.platform_data = &config[i];
+ ret = platform_device_add(new_mcbsp);
+ if (ret) {
+ platform_device_put(new_mcbsp);
+ continue;
+ }
+ omap_mcbsp_devices[i] = new_mcbsp;
+ }
+}
+
static int __init omap1_mcbsp_init(void)
{
if (!cpu_class_is_omap1())
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index ea28f98..bd9a06b 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -26,54 +26,8 @@
#include <plat/mmc.h>
#include <mach/gpio.h>
#include <plat/menelaus.h>
-#include <plat/mcbsp.h>
#include <plat/omap44xx.h>
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
-
-static struct platform_device **omap_mcbsp_devices;
-
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size)
-{
- int i;
-
- omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
- GFP_KERNEL);
- if (!omap_mcbsp_devices) {
- printk(KERN_ERR "Could not register McBSP devices\n");
- return;
- }
-
- for (i = 0; i < size; i++) {
- struct platform_device *new_mcbsp;
- int ret;
-
- new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
- if (!new_mcbsp)
- continue;
- platform_device_add_resources(new_mcbsp, &res[i * res_count],
- res_count);
- new_mcbsp->dev.platform_data = &config[i];
- ret = platform_device_add(new_mcbsp);
- if (ret) {
- platform_device_put(new_mcbsp);
- continue;
- }
- omap_mcbsp_devices[i] = new_mcbsp;
- }
-}
-
-#else
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size)
-{ }
-#endif
-
-/*-------------------------------------------------------------------------*/
-
#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 8ab14d8..7adfd92 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -407,8 +407,6 @@ extern int omap_mcbsp_count, omap_mcbsp_cache_size;
#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
int omap_mcbsp_init(void);
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size);
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
#ifdef CONFIG_ARCH_OMAP3
void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
--
1.7.6.3
^ permalink raw reply related
* [PATCH resend 03/13] omap: mcbsp: Implement generic register access
From: Jarkko Nikula @ 2011-09-26 7:45 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1317023150-6730-1-git-send-email-jarkko.nikula@bitmer.com>
Register access can be made more generic by calculating register address
offsets runtime from common register definitions and by using reg_size and
reg_step variables that are passed via platform data. Common register
definitions are possible since McBSP registers are ordered similarly between
OMAP versions.
Remove also references to OMAP2+ specific config_type variable from generic
McBSP code since other variables and feature flags are better to carry needed
information from platform code.
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
---
arch/arm/mach-omap1/mcbsp.c | 2 +
arch/arm/mach-omap2/mcbsp.c | 6 +-
arch/arm/plat-omap/include/plat/mcbsp.h | 145 ++++++++++++-------------------
arch/arm/plat-omap/mcbsp.c | 45 ++++------
4 files changed, 82 insertions(+), 116 deletions(-)
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 3c985ac..36ab5d8 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -391,6 +391,8 @@ static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
continue;
platform_device_add_resources(new_mcbsp, &res[i * res_count],
res_count);
+ config[i].reg_size = 2;
+ config[i].reg_step = 2;
new_mcbsp->dev.platform_data = &config[i];
ret = platform_device_add(new_mcbsp);
if (ret) {
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 7a42f32..43b9ccf 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -126,7 +126,11 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
return -ENOMEM;
}
- pdata->mcbsp_config_type = oh->class->rev;
+ pdata->reg_step = 4;
+ if (oh->class->rev < MCBSP_CONFIG_TYPE2)
+ pdata->reg_size = 2;
+ else
+ pdata->reg_size = 4;
if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (id == 2)
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 7adfd92..14bc1cb 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -51,93 +51,60 @@ static struct platform_device omap_mcbsp##port_nr = { \
#define OMAP1610_MCBSP2_BASE 0xfffb1000
#define OMAP1610_MCBSP3_BASE 0xe1017000
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OMAP_MCBSP_REG_DRR2 0x00
-#define OMAP_MCBSP_REG_DRR1 0x02
-#define OMAP_MCBSP_REG_DXR2 0x04
-#define OMAP_MCBSP_REG_DXR1 0x06
-#define OMAP_MCBSP_REG_DRR 0x02
-#define OMAP_MCBSP_REG_DXR 0x06
-#define OMAP_MCBSP_REG_SPCR2 0x08
-#define OMAP_MCBSP_REG_SPCR1 0x0a
-#define OMAP_MCBSP_REG_RCR2 0x0c
-#define OMAP_MCBSP_REG_RCR1 0x0e
-#define OMAP_MCBSP_REG_XCR2 0x10
-#define OMAP_MCBSP_REG_XCR1 0x12
-#define OMAP_MCBSP_REG_SRGR2 0x14
-#define OMAP_MCBSP_REG_SRGR1 0x16
-#define OMAP_MCBSP_REG_MCR2 0x18
-#define OMAP_MCBSP_REG_MCR1 0x1a
-#define OMAP_MCBSP_REG_RCERA 0x1c
-#define OMAP_MCBSP_REG_RCERB 0x1e
-#define OMAP_MCBSP_REG_XCERA 0x20
-#define OMAP_MCBSP_REG_XCERB 0x22
-#define OMAP_MCBSP_REG_PCR0 0x24
-#define OMAP_MCBSP_REG_RCERC 0x26
-#define OMAP_MCBSP_REG_RCERD 0x28
-#define OMAP_MCBSP_REG_XCERC 0x2A
-#define OMAP_MCBSP_REG_XCERD 0x2C
-#define OMAP_MCBSP_REG_RCERE 0x2E
-#define OMAP_MCBSP_REG_RCERF 0x30
-#define OMAP_MCBSP_REG_XCERE 0x32
-#define OMAP_MCBSP_REG_XCERF 0x34
-#define OMAP_MCBSP_REG_RCERG 0x36
-#define OMAP_MCBSP_REG_RCERH 0x38
-#define OMAP_MCBSP_REG_XCERG 0x3A
-#define OMAP_MCBSP_REG_XCERH 0x3C
-
-/* Dummy defines, these are not available on omap1 */
-#define OMAP_MCBSP_REG_XCCR 0x00
-#define OMAP_MCBSP_REG_RCCR 0x00
-
-#else
-
-#define OMAP_MCBSP_REG_DRR2 0x00
-#define OMAP_MCBSP_REG_DRR1 0x04
-#define OMAP_MCBSP_REG_DXR2 0x08
-#define OMAP_MCBSP_REG_DXR1 0x0C
-#define OMAP_MCBSP_REG_DRR 0x00
-#define OMAP_MCBSP_REG_DXR 0x08
-#define OMAP_MCBSP_REG_SPCR2 0x10
-#define OMAP_MCBSP_REG_SPCR1 0x14
-#define OMAP_MCBSP_REG_RCR2 0x18
-#define OMAP_MCBSP_REG_RCR1 0x1C
-#define OMAP_MCBSP_REG_XCR2 0x20
-#define OMAP_MCBSP_REG_XCR1 0x24
-#define OMAP_MCBSP_REG_SRGR2 0x28
-#define OMAP_MCBSP_REG_SRGR1 0x2C
-#define OMAP_MCBSP_REG_MCR2 0x30
-#define OMAP_MCBSP_REG_MCR1 0x34
-#define OMAP_MCBSP_REG_RCERA 0x38
-#define OMAP_MCBSP_REG_RCERB 0x3C
-#define OMAP_MCBSP_REG_XCERA 0x40
-#define OMAP_MCBSP_REG_XCERB 0x44
-#define OMAP_MCBSP_REG_PCR0 0x48
-#define OMAP_MCBSP_REG_RCERC 0x4C
-#define OMAP_MCBSP_REG_RCERD 0x50
-#define OMAP_MCBSP_REG_XCERC 0x54
-#define OMAP_MCBSP_REG_XCERD 0x58
-#define OMAP_MCBSP_REG_RCERE 0x5C
-#define OMAP_MCBSP_REG_RCERF 0x60
-#define OMAP_MCBSP_REG_XCERE 0x64
-#define OMAP_MCBSP_REG_XCERF 0x68
-#define OMAP_MCBSP_REG_RCERG 0x6C
-#define OMAP_MCBSP_REG_RCERH 0x70
-#define OMAP_MCBSP_REG_XCERG 0x74
-#define OMAP_MCBSP_REG_XCERH 0x78
-#define OMAP_MCBSP_REG_SYSCON 0x8C
-#define OMAP_MCBSP_REG_THRSH2 0x90
-#define OMAP_MCBSP_REG_THRSH1 0x94
-#define OMAP_MCBSP_REG_IRQST 0xA0
-#define OMAP_MCBSP_REG_IRQEN 0xA4
-#define OMAP_MCBSP_REG_WAKEUPEN 0xA8
-#define OMAP_MCBSP_REG_XCCR 0xAC
-#define OMAP_MCBSP_REG_RCCR 0xB0
-#define OMAP_MCBSP_REG_XBUFFSTAT 0xB4
-#define OMAP_MCBSP_REG_RBUFFSTAT 0xB8
-#define OMAP_MCBSP_REG_SSELCR 0xBC
+/* McBSP register numbers. Register address offset = num * reg_step */
+enum {
+ /* Common registers */
+ OMAP_MCBSP_REG_SPCR2 = 4,
+ OMAP_MCBSP_REG_SPCR1,
+ OMAP_MCBSP_REG_RCR2,
+ OMAP_MCBSP_REG_RCR1,
+ OMAP_MCBSP_REG_XCR2,
+ OMAP_MCBSP_REG_XCR1,
+ OMAP_MCBSP_REG_SRGR2,
+ OMAP_MCBSP_REG_SRGR1,
+ OMAP_MCBSP_REG_MCR2,
+ OMAP_MCBSP_REG_MCR1,
+ OMAP_MCBSP_REG_RCERA,
+ OMAP_MCBSP_REG_RCERB,
+ OMAP_MCBSP_REG_XCERA,
+ OMAP_MCBSP_REG_XCERB,
+ OMAP_MCBSP_REG_PCR0,
+ OMAP_MCBSP_REG_RCERC,
+ OMAP_MCBSP_REG_RCERD,
+ OMAP_MCBSP_REG_XCERC,
+ OMAP_MCBSP_REG_XCERD,
+ OMAP_MCBSP_REG_RCERE,
+ OMAP_MCBSP_REG_RCERF,
+ OMAP_MCBSP_REG_XCERE,
+ OMAP_MCBSP_REG_XCERF,
+ OMAP_MCBSP_REG_RCERG,
+ OMAP_MCBSP_REG_RCERH,
+ OMAP_MCBSP_REG_XCERG,
+ OMAP_MCBSP_REG_XCERH,
+
+ /* OMAP1-OMAP2420 registers */
+ OMAP_MCBSP_REG_DRR2 = 0,
+ OMAP_MCBSP_REG_DRR1,
+ OMAP_MCBSP_REG_DXR2,
+ OMAP_MCBSP_REG_DXR1,
+
+ /* OMAP2430 and onwards */
+ OMAP_MCBSP_REG_DRR = 0,
+ OMAP_MCBSP_REG_DXR = 2,
+ OMAP_MCBSP_REG_SYSCON = 35,
+ OMAP_MCBSP_REG_THRSH2,
+ OMAP_MCBSP_REG_THRSH1,
+ OMAP_MCBSP_REG_IRQST = 40,
+ OMAP_MCBSP_REG_IRQEN,
+ OMAP_MCBSP_REG_WAKEUPEN,
+ OMAP_MCBSP_REG_XCCR,
+ OMAP_MCBSP_REG_RCCR,
+ OMAP_MCBSP_REG_XBUFFSTAT,
+ OMAP_MCBSP_REG_RBUFFSTAT,
+ OMAP_MCBSP_REG_SSELCR,
+};
+/* OMAP3 sidetone control registers */
#define OMAP_ST_REG_REV 0x00
#define OMAP_ST_REG_SYSCONFIG 0x10
#define OMAP_ST_REG_IRQSTATUS 0x18
@@ -146,8 +113,6 @@ static struct platform_device omap_mcbsp##port_nr = { \
#define OMAP_ST_REG_SFIRCR 0x28
#define OMAP_ST_REG_SSELCR 0x2C
-#endif
-
/************************** McBSP SPCR1 bit definitions ***********************/
#define RRST 0x0001
#define RRDY 0x0002
@@ -350,7 +315,8 @@ struct omap_mcbsp_ops {
struct omap_mcbsp_platform_data {
struct omap_mcbsp_ops *ops;
u16 buffer_size;
- unsigned int mcbsp_config_type;
+ u8 reg_size;
+ u8 reg_step;
};
struct omap_mcbsp_st_data {
@@ -389,7 +355,6 @@ struct omap_mcbsp {
u16 max_rx_thres;
#endif
void *reg_cache;
- unsigned int mcbsp_config_type;
};
/**
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 4b233e8..623f2c1 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -35,29 +35,27 @@ int omap_mcbsp_count, omap_mcbsp_cache_size;
static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
{
- if (cpu_class_is_omap1()) {
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)] = (u16)val;
- __raw_writew((u16)val, mcbsp->io_base + reg);
- } else if (cpu_is_omap2420()) {
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)] = (u16)val;
- __raw_writew((u16)val, mcbsp->io_base + reg);
+ void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
+
+ if (mcbsp->pdata->reg_size == 2) {
+ ((u16 *)mcbsp->reg_cache)[reg] = (u16)val;
+ __raw_writew((u16)val, addr);
} else {
- ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)] = val;
- __raw_writel(val, mcbsp->io_base + reg);
+ ((u32 *)mcbsp->reg_cache)[reg] = val;
+ __raw_writel(val, addr);
}
}
static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
{
- if (cpu_class_is_omap1()) {
- return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)];
- } else if (cpu_is_omap2420()) {
- return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+ void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
+
+ if (mcbsp->pdata->reg_size == 2) {
+ return !from_cache ? __raw_readw(addr) :
+ ((u16 *)mcbsp->reg_cache)[reg];
} else {
- return !from_cache ? __raw_readl(mcbsp->io_base + reg) :
- ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+ return !from_cache ? __raw_readl(addr) :
+ ((u32 *)mcbsp->reg_cache)[reg];
}
}
@@ -238,21 +236,19 @@ int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream)
}
mcbsp = id_to_mcbsp_ptr(id);
- data_reg = mcbsp->phys_dma_base;
-
- if (mcbsp->mcbsp_config_type < MCBSP_CONFIG_TYPE2) {
+ if (mcbsp->pdata->reg_size == 2) {
if (stream)
- data_reg += OMAP_MCBSP_REG_DRR1;
+ data_reg = OMAP_MCBSP_REG_DRR1;
else
- data_reg += OMAP_MCBSP_REG_DXR1;
+ data_reg = OMAP_MCBSP_REG_DXR1;
} else {
if (stream)
- data_reg += OMAP_MCBSP_REG_DRR;
+ data_reg = OMAP_MCBSP_REG_DRR;
else
- data_reg += OMAP_MCBSP_REG_DXR;
+ data_reg = OMAP_MCBSP_REG_DXR;
}
- return data_reg;
+ return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step;
}
EXPORT_SYMBOL(omap_mcbsp_dma_reg_params);
@@ -1337,7 +1333,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
mcbsp->pdata = pdata;
mcbsp->dev = &pdev->dev;
mcbsp_ptr[id] = mcbsp;
- mcbsp->mcbsp_config_type = pdata->mcbsp_config_type;
platform_set_drvdata(pdev, mcbsp);
pm_runtime_enable(mcbsp->dev);
--
1.7.6.3
^ permalink raw reply related
* [PATCH resend 04/13] omap: mcbsp: Make wakeup control generic
From: Jarkko Nikula @ 2011-09-26 7:45 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1317023150-6730-1-git-send-email-jarkko.nikula@bitmer.com>
Currently wakeup control code is compiled only when CONFIG_ARCH_OMAP3 is
set even it should be available for CONFIG_ARCH_OMAP4 only builds also.
Fix this by making wakeup control generic so that it is executed whenever
new feature flag has_wakeup in platform data is set. Currently flag is set
for McBSP config types 3 and 4.
Remove also old comments about idle mode settings and HW bug workarounds
that were not updated during hwmod conversion.
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
---
arch/arm/mach-omap2/mcbsp.c | 3 ++
arch/arm/plat-omap/include/plat/mcbsp.h | 3 ++
arch/arm/plat-omap/mcbsp.c | 43 ++++++------------------------
3 files changed, 15 insertions(+), 34 deletions(-)
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 43b9ccf..de3457d 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -141,6 +141,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
pdata->buffer_size = 0x80;
}
+ if (oh->class->rev >= MCBSP_CONFIG_TYPE3)
+ pdata->has_wakeup = true;
+
oh_device[0] = oh;
if (oh->dev_attr) {
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 14bc1cb..ac48d83 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -317,6 +317,9 @@ struct omap_mcbsp_platform_data {
u16 buffer_size;
u8 reg_size;
u8 reg_step;
+
+ /* McBSP platform and instance specific features */
+ bool has_wakeup; /* Wakeup capability */
};
struct omap_mcbsp_st_data {
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 623f2c1..0338ad0 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -659,35 +659,7 @@ int omap_mcbsp_get_dma_op_mode(unsigned int id)
}
EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
-static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
-{
- /*
- * Enable wakup behavior, smart idle and all wakeups
- * REVISIT: some wakeups may be unnecessary
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
- }
-}
-
-static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
-{
- /*
- * Disable wakup behavior, smart idle and all wakeups
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- /*
- * HW bug workaround - If no_idle mode is taken, we need to
- * go to smart_idle before going to always_idle, or the
- * device will not hit retention anymore.
- */
-
- MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
- }
-}
#else
-static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
-static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
static inline void omap_st_start(struct omap_mcbsp *mcbsp) {}
static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {}
#endif
@@ -726,8 +698,9 @@ int omap_mcbsp_request(unsigned int id)
pm_runtime_get_sync(mcbsp->dev);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_request(mcbsp);
+ /* Enable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
/*
* Make sure that transmitter, receiver and sample-rate generator are
@@ -764,8 +737,9 @@ err_clk_disable:
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_free(mcbsp);
+ /* Disable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
pm_runtime_put_sync(mcbsp->dev);
@@ -794,8 +768,9 @@ void omap_mcbsp_free(unsigned int id)
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_free(mcbsp);
+ /* Disable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
pm_runtime_put_sync(mcbsp->dev);
--
1.7.6.3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox