* [PATCH] [RFC] ARM: compile fix for DEBUG_LL=y && MMU=n
From: Rob Herring @ 2013-01-16 19:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1358346726-27199-1-git-send-email-u.kleine-koenig@pengutronix.de>
On 01/16/2013 08:32 AM, Uwe Kleine-K?nig wrote:
> debug_ll_addr is only used on machines with an MMU so it can be #ifdef'ed
> out safely. This fixes:
>
> arch/arm/kernel/debug.S: Assembler messages:
> arch/arm/kernel/debug.S:104: Error: too many positional arguments
>
> Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Stephen Warren <swarren@nvidia.com>
> Cc: Olof Johansson <olof@lixom.net>
> ---
> The obvious alternative fix is to make addruart on !MMU take 3
> arguments, too.
We never envision a need to get the uart address from C code on !MMU?
Either way:
Acked-by: Rob Herring <rob.herring@calxeda.com>
>
> The problem was introduced in
>
> e5c5f2a (ARM: implement debug_ll_io_init())
>
> which appeared in v3.8-rc1.
> ---
> arch/arm/kernel/debug.S | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
> index 6809200..14f7c3b 100644
> --- a/arch/arm/kernel/debug.S
> +++ b/arch/arm/kernel/debug.S
> @@ -100,12 +100,14 @@ ENTRY(printch)
> b 1b
> ENDPROC(printch)
>
> +#ifdef CONFIG_MMU
> ENTRY(debug_ll_addr)
> addruart r2, r3, ip
> str r2, [r0]
> str r3, [r1]
> mov pc, lr
> ENDPROC(debug_ll_addr)
> +#endif
>
> #else
>
>
^ permalink raw reply
* [PATCH] [RFC] ARM: compile fix for DEBUG_LL=y && MMU=n
From: Uwe Kleine-König @ 2013-01-16 19:26 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <50F6E6C4.1050409@wwwdotorg.org>
On Wed, Jan 16, 2013 at 10:43:32AM -0700, Stephen Warren wrote:
> On 01/16/2013 07:32 AM, Uwe Kleine-K?nig wrote:
> > debug_ll_addr is only used on machines with an MMU so it can be #ifdef'ed
> > out safely. This fixes:
> >
> > arch/arm/kernel/debug.S: Assembler messages:
> > arch/arm/kernel/debug.S:104: Error: too many positional arguments
> >
> > Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> > Cc: Rob Herring <rob.herring@calxeda.com>
> > Cc: Stephen Warren <swarren@nvidia.com>
> > Cc: Olof Johansson <olof@lixom.net>
> > ---
> > The obvious alternative fix is to make addruart on !MMU take 3
> > arguments, too.
> >
> > The problem was introduced in
> >
> > e5c5f2a (ARM: implement debug_ll_io_init())
>
> It may be useful to mention that in the commit message.
right.
> Sorry for the breakage. Are there any ARM defconfigs for !MMU?
I'm not aware of anything in mainline.
> Reviewed-by: Stephen Warren <swarren@nvidia.com>
thanks
> (although should the second copy of debug_ll_addr at the end of the file
> be ifdef'd away too; the one for CONFIG_DEBUG_SEMIHOSTING)?
In contrast to the !CONFIG_DEBUG_SEMIHOSTING implementation this one
doesn't call addruart and should compile just fine. I don't care much.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply
* [PATCH v6 11/22] mfd: omap-usb-host: Use devm_kzalloc() and devm_request_and_ioremap()
From: Sergei Shtylyov @ 2013-01-16 19:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1358347433-329-12-git-send-email-rogerq@ti.com>
Hello.
On 01/16/2013 05:43 PM, Roger Quadros wrote:
> Use devm_ variants of kzalloc and ioremap. Also clean up error path.
> Signed-off-by: Roger Quadros <rogerq@ti.com>
[...]
> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index 061366d..0f190b6 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -461,15 +461,20 @@ static int usbhs_omap_probe(struct platform_device *pdev)
[...]
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
> + omap->uhh_base = devm_request_and_ioremap(dev, res);
> + if (!omap->uhh_base) {
> + dev_err(dev, "Resource request/ioremap failed\n");
> + return -ENOMEM;
Should be -EADDRNOTAVAIL according to the comment to
devm_request_and_ioremap()...
WBR, Sergei
^ permalink raw reply
* [PATCH v6 03/22] mfd: omap-usb-tll: Use devm_kzalloc/ioremap and clean up error path
From: Sergei Shtylyov @ 2013-01-16 19:37 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1358347433-329-4-git-send-email-rogerq@ti.com>
Hello.
On 01/16/2013 05:43 PM, Roger Quadros wrote:
> Use devm_ variants of kzalloc() and ioremap(). Simplify the error path.
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> drivers/mfd/omap-usb-tll.c | 36 +++++++++++-------------------------
> 1 files changed, 11 insertions(+), 25 deletions(-)
> diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
> index 9658e18..53ed10b 100644
> --- a/drivers/mfd/omap-usb-tll.c
> +++ b/drivers/mfd/omap-usb-tll.c
[...]
> - base = ioremap(res->start, resource_size(res));
> + base = devm_request_and_ioremap(dev, res);
> if (!base) {
> - dev_err(dev, "TLL ioremap failed\n");
> ret = -ENOMEM;
-EADDRNOTAVAIL as the comment to devm_request_and_ioremap() suggests.
> - goto err_usbtll_p2_fck;
> + dev_err(dev, "Resource request/ioremap failed:%d\n", ret);
> + goto err_res;
> }
WBR, Sergei
^ permalink raw reply
* [PATCH 5/6] arm: mvebu: Enable USB controllers on Armada XP OpenBlocks AX3-4 board
From: Thomas Petazzoni @ 2013-01-16 19:37 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CALF0-+XKGk+ru3VZ6815KTu_Aj_daYafr+Y5WJ9dXUoFqbTHOQ@mail.gmail.com>
Dear Ezequiel Garcia,
On Wed, 16 Jan 2013 16:16:59 -0300, Ezequiel Garcia wrote:
> >> + usb at d0050000 {
> >> + status = "okay";
> >> + };
> >> + usb at d0051000 {
> >> + status = "okay";
> >> + };
> >> + usb at d0052000 {
> >> + status = "okay";
> >> + };
> > USB2 of openblocks-ax3-4 is used as Mini-PCIE.
> > I think this is unnecessary.
>
> Mmm... could you explain this with some more detail.
> Unfortunately, I don't have access to an Openblocks board to check on
> this, so I'd appreciate any clarification.
>
> Is there any Openblocks datasheet or hardware schematics publicly
> available for me to look at?
As far as I know, there is no public document. I've been given access
to a PDF, in Japanese, that gives some details about the hardware.
>From what I can read, only 2 USB ports are used from the internal
Marvell EHCI controller.
Another USB port is available, but it is connected to a USB controller
that sits on the PCIe bus. And the PCIe interface on which this USB
controller is connected is not enabled in the default U-Boot shipped
with AX3-4 (at least not with the generation I have). I've been given
an U-Boot version that is supposed to enable this PCIe interface, but I
haven't tested yet.
Anyway, from a Marvell EHCI controller perspective, only two ports are
used, as Nobuhiro said. I am not sure which ports, but it seems like
the first two ones were used. One of the two physical ports is a
combined USB / eSATA port, but I don't think this makes any difference
at the software level.
I don't have the OpenBlocks AX3-4 with me right now, but I could
probably make a test on Friday.
Best regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [PATCH v4 2/9] clk: tegra: Add tegra specific clocks
From: Stephen Warren @ 2013-01-16 20:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20130116.171242.2189136612266237422.hdoyu@nvidia.com>
On 01/16/2013 08:12 AM, Hiroshi Doyu wrote:
> Prashant Gaikwad <pgaikwad@nvidia.com> wrote @ Fri, 11 Jan 2013 08:46:20 +0100:
>
> ....
>> diff --git a/drivers/clk/tegra/clk-audio-sync.c b/drivers/clk/tegra/clk-audio-sync.c
>> +#define to_clk_sync_source(_hw) \
>> + container_of(_hw, struct tegra_clk_sync_source, hw)
>
> Can we define "struct tegra_clk_sync_source" here if there's no need
> to expose this structure out?
In some cases, yes. However, some of the clock structs and ops variables
are re-used by multiple clock types in different files. For example,
struct tegra_clk_periph aggregates a struct tegra_clk_frac_div and a
struct tegra_clk_periph_gate. That means that at least some of the types
and ops variables must be declared in clk.h (or some header anyway). As
such, I'd rather just have all the types and ops variables declared
there for consistency.
>> +static int clk_frac_div_set_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long parent_rate)
>> +{
>> + struct tegra_clk_frac_div *divider = to_clk_frac_div(hw);
>> + int div;
>> + unsigned long flags = 0;
>
> nit, is "flags" not needed to initialize here?
It avoids a compiler warning; the compiler doesn't that the if condition
that guards the path that uses flags is the same condition as the path
that initializes it. Or, it may be related to the fact that
spin_lock_irqsave() writes to the value through a pointer parameter, and
the compiler doesn't know it's an out-only parameter.
>> diff --git a/drivers/clk/tegra/clk-periph-gate.c b/drivers/clk/tegra/clk-periph-gate.c
>> diff --git a/drivers/clk/tegra/clk-periph-gate.c b/drivers/clk/tegra/clk-periph-gate.c
>> +#define to_clk_periph_gate(_hw) \
>> + container_of(_hw, struct tegra_clk_periph_gate, hw)
>
> For consistency, put "to_clk_periph_gate(_hw)" in "clk.h", then this
> can be used in clk-periph.c as well.
Sure. I moved all "to_clk_*()" macros to clk.h for consistency, since
the types are all there anyway.
>> +struct clk *tegra_clk_periph_gate(const char *name, const char *parent_name,
...
>> + gate = kzalloc(sizeof(struct tegra_clk_periph_gate), GFP_KERNEL);
>
> gate = kzalloc(sizeof(*gate), GFP_KERNEL) ?
I've already fixed all those up locally.
>> diff --git a/drivers/clk/tegra/clk-periph.c b/drivers/clk/tegra/clk-periph.c
>> +struct clk *tegra_clk_periph(const char *name, const char **parent_names,
>> + int num_parents, struct tegra_clk_periph *periph,
>> + void __iomem *clk_base, u32 offset)
>> +{
>> + struct clk *clk;
>> + struct clk_init_data init;
>> +
>> + init.name = name;
>> + init.ops = &tegra_clk_periph_ops;
>> + init.flags = 0;
>
> struct members in stack are expected to initialize 0.
Stack variables aren't initialized in C. In this case, since the
individual fields are being assigned via statements rather than an
initializer, everything has to be done explicitly.
>> diff --git a/drivers/clk/tegra/clk-pll-out.c b/drivers/clk/tegra/clk-pll-out.c
>> +#define pll_out_enb(p) (BIT(p->enb_bit_idx))
>> +#define pll_out_rst(p) (BIT(p->rst_bit_idx))
>
> I don't see much benefit from the above macros.
Meh. Do you feel strongly about this? I'm not really inclined to got
through and change these; there are a bunch of similar things in other
files, and it feels like it'd just be churn.
Anything I didn't explicitly say no to, I have implemented.
A /lot/ more of the original patch was quoted that was really necessary
to make your comments; it made wading through the email a little tiresome.
^ permalink raw reply
* [PATCH 2/7] reset: Add reset controller API
From: Sascha Hauer @ 2013-01-16 20:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1358352787-15441-3-git-send-email-p.zabel@pengutronix.de>
On Wed, Jan 16, 2013 at 05:13:02PM +0100, Philipp Zabel wrote:
> This adds a simple API for devices to request being reset
> by separate reset controller hardware and implements the
> reset signal device tree binding.
>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> drivers/Kconfig | 2 +
> drivers/Makefile | 2 +
> drivers/reset/Kconfig | 10 ++
> drivers/reset/Makefile | 2 +
> drivers/reset/core.c | 241 ++++++++++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 257 insertions(+)
> create mode 100644 drivers/reset/Kconfig
> create mode 100644 drivers/reset/Makefile
> create mode 100644 drivers/reset/core.c
>
> diff --git a/drivers/Kconfig b/drivers/Kconfig
> index f5fb072..51f73ae 100644
> --- a/drivers/Kconfig
> +++ b/drivers/Kconfig
> @@ -158,4 +158,6 @@ source "drivers/irqchip/Kconfig"
>
> source "drivers/ipack/Kconfig"
>
> +source "drivers/reset/Kconfig"
> +
> endmenu
> diff --git a/drivers/Makefile b/drivers/Makefile
> index 346ecc5..870bf7e 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -42,6 +42,8 @@ ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
> obj-y += clocksource/
> endif
>
> +obj-$(CONFIG_RESET_CONTROLLER) += reset/
> +
> # tty/ comes before char/ so that the VT console is the boot-time
> # default.
> obj-y += tty/
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> new file mode 100644
> index 0000000..82dc89e
> --- /dev/null
> +++ b/drivers/reset/Kconfig
> @@ -0,0 +1,10 @@
> +menuconfig RESET_CONTROLLER
> + bool "Reset Controller Support"
> + help
> + Generic Reset Controller support.
> +
> + This framework is designed to abstract reset handling of devices
> + via GPIOs or SoC-internal reset controller modules.
> +
> + If unsure, say no.
> +
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> new file mode 100644
> index 0000000..9a7b6df
> --- /dev/null
> +++ b/drivers/reset/Makefile
> @@ -0,0 +1,2 @@
> +obj-$(CONFIG_RESET_CONTROLLER) += core.o
> +
> diff --git a/drivers/reset/core.c b/drivers/reset/core.c
> new file mode 100644
> index 0000000..f0ed61b
> --- /dev/null
> +++ b/drivers/reset/core.c
> @@ -0,0 +1,241 @@
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/export.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/reset.h>
> +#include <linux/reset-controller.h>
> +#include <linux/slab.h>
> +
> +static DEFINE_MUTEX(reset_controller_list_mutex);
> +static LIST_HEAD(reset_controller_list);
> +
> +/**
> + * struct reset_control - a reset control
> + *
> + * @id: ID of the reset controller in the reset
> + * controller device
> + */
> +struct reset_control {
> + struct reset_controller_dev *rcdev;
> + unsigned int id;
> +};
> +
> +/**
> + * reset_controller_register - register a reset controller
> + *
> + * @ops: a pointer to struct reset_controller_ops callbacks
> + *
> + * Returns a struct reset_controller_dev or IS_ERR() condition
> + * containing errno.
The comment seems wrong.
> + */
> +int reset_controller_register(struct reset_controller_dev *rcdev)
> +{
> + mutex_lock(&reset_controller_list_mutex);
> + list_add(&rcdev->list, &reset_controller_list);
> + mutex_unlock(&reset_controller_list_mutex);
> +
> + return 0;
> +}
> +
> +/**
> + * reset_control_reset - reset the controlled device
> + * @rstc: reset controller
> + */
> +int reset_control_reset(struct reset_control *rstc)
> +{
> + if (rstc->rcdev->ops->reset)
> + return rstc->rcdev->ops->reset(rstc->id);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(reset_control_reset);
> +
> +/**
> + * reset_control_assert - asserts the reset line
> + * @rstc: reset controller
> + */
> +int reset_control_assert(struct reset_control *rstc)
> +{
> + if (rstc->rcdev->ops->assert)
> + return rstc->rcdev->ops->assert(rstc->id);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(reset_control_assert);
> +
> +/**
> + * reset_control_deassert - deasserts the reset line
> + * @rstc: reset controller
> + */
> +int reset_control_deassert(struct reset_control *rstc)
> +{
> + if (rstc->rcdev->ops->deassert)
> + return rstc->rcdev->ops->deassert(rstc->id);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(reset_control_deassert);
> +
> +/**
> + * reset_control_is_asserted - deasserts the reset line
copy-paste from the function above?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply
* [PATCH] OMAP: omap4-panda: add WiLink shared transport power functions
From: Luciano Coelho @ 2013-01-16 20:34 UTC (permalink / raw)
To: linux-arm-kernel
The code to enable and disable the WiLink shared transport has been
removed from the TI-ST driver, so it must be implemented in the board
files instead. Add the relevant operations to Panda's board file.
Additionally, add the UART2 muxing data, so it's properly configured.
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
arch/arm/mach-omap2/board-omap4panda.c | 57 +++++++++++++++++++++++++++++---
1 file changed, 53 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 5c8e9ce..97a274b 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -51,18 +51,57 @@
#define GPIO_HUB_NRESET 62
#define GPIO_WIFI_PMENA 43
#define GPIO_WIFI_IRQ 53
+#define GPIO_BT_EN 46
/* wl127x BT, FM, GPS connectivity chip */
+static int plat_kim_chip_enable(struct kim_data_s *kim_data)
+{
+ gpio_set_value(GPIO_BT_EN, GPIO_LOW);
+ mdelay(5);
+ gpio_set_value(GPIO_BT_EN, GPIO_HIGH);
+ mdelay(100);
+
+ return 0;
+}
+
+static int plat_kim_chip_disable(struct kim_data_s *kim_data)
+{
+ gpio_set_value(GPIO_BT_EN, GPIO_LOW);
+ mdelay(1);
+ gpio_set_value(GPIO_BT_EN, GPIO_HIGH);
+ mdelay(1);
+ gpio_set_value(GPIO_BT_EN, GPIO_LOW);
+
+ return 0;
+}
+
static struct ti_st_plat_data wilink_platform_data = {
- .nshutdown_gpio = 46,
.dev_name = "/dev/ttyO1",
.flow_cntrl = 1,
.baud_rate = 3000000,
- .chip_enable = NULL,
- .suspend = NULL,
- .resume = NULL,
+ .chip_enable = plat_kim_chip_enable,
+ .chip_disable = plat_kim_chip_disable,
};
+static int wilink_st_init(void)
+{
+ int status;
+
+ status = gpio_request(GPIO_BT_EN, "kim");
+ if (status) {
+ pr_err("%s: failed to request gpio %d\n", __func__,
+ GPIO_BT_EN);
+ return status;
+ }
+
+ status = gpio_direction_output(GPIO_BT_EN, 0);
+ if (status)
+ pr_err("%s: unable to configure gpio %d", __func__,
+ GPIO_BT_EN);
+
+ return status;
+}
+
static struct platform_device wl1271_device = {
.name = "kim",
.id = -1,
@@ -397,6 +436,12 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP_PULL_ENA),
OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ /* UART2 - BT/FM/GPS shared transport */
+ OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
@@ -433,6 +478,10 @@ static void __init omap4_panda_init(void)
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
+ ret = wilink_st_init();
+ if (ret)
+ pr_err("WiLink shared transport init failed: %d\n", ret);
+
omap4_panda_init_rev();
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
--
1.7.10.4
^ permalink raw reply related
* [PATCH V5 1/3] clk: tegra: add Tegra specific clocks
From: Stephen Warren @ 2013-01-16 20:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Prashant Gaikwad <pgaikwad@nvidia.com>
Add Tegra specific clocks, pll, pll_out, peripheral, frac_divider, super.
Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
[swarren: alloc sizeof(*foo) not sizeof(struct foo), add comments re:
storing pointers to stack variables, make a timeout loop more idiomatic,
use _clk_pll_disable() not clk_disable_pll() from _program_pll() to
avoid redundant lock operations, unified tegra_clk_periph() and
tegra_clk_periph_nodiv(), unified tegra_clk_pll{,e}, rename all clock
registration functions so they don't have the same name as the clock
structs.]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
V5: Implemented all changes marked [swarren] in the commit descriptions.
Mike, These patches depend on a couple patches in the Tegra tree, and
various other Tegra patches depend on them. I'd like to take these through
the Tegra tree. Can you please ack or otherwise OK this? Thanks.
drivers/clk/Makefile | 1 +
drivers/clk/tegra/Makefile | 8 +
drivers/clk/tegra/clk-audio-sync.c | 87 +++++
drivers/clk/tegra/clk-divider.c | 187 ++++++++++
drivers/clk/tegra/clk-periph-gate.c | 179 ++++++++++
drivers/clk/tegra/clk-periph.c | 180 ++++++++++
drivers/clk/tegra/clk-pll-out.c | 123 +++++++
drivers/clk/tegra/clk-pll.c | 648 +++++++++++++++++++++++++++++++++++
drivers/clk/tegra/clk-super.c | 154 +++++++++
drivers/clk/tegra/clk.c | 69 ++++
drivers/clk/tegra/clk.h | 490 ++++++++++++++++++++++++++
11 files changed, 2126 insertions(+)
create mode 100644 drivers/clk/tegra/Makefile
create mode 100644 drivers/clk/tegra/clk-audio-sync.c
create mode 100644 drivers/clk/tegra/clk-divider.c
create mode 100644 drivers/clk/tegra/clk-periph-gate.c
create mode 100644 drivers/clk/tegra/clk-periph.c
create mode 100644 drivers/clk/tegra/clk-pll-out.c
create mode 100644 drivers/clk/tegra/clk-pll.c
create mode 100644 drivers/clk/tegra/clk-super.c
create mode 100644 drivers/clk/tegra/clk.c
create mode 100644 drivers/clk/tegra/clk.h
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index ee90e87..f0b269a 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
obj-$(CONFIG_ARCH_SUNXI) += clk-sunxi.o
obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o
+obj-$(CONFIG_ARCH_TEGRA) += tegra/
# Chip specific
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile
new file mode 100644
index 0000000..68bd353
--- /dev/null
+++ b/drivers/clk/tegra/Makefile
@@ -0,0 +1,8 @@
+obj-y += clk.o
+obj-y += clk-audio-sync.o
+obj-y += clk-divider.o
+obj-y += clk-periph.o
+obj-y += clk-periph-gate.o
+obj-y += clk-pll.o
+obj-y += clk-pll-out.o
+obj-y += clk-super.o
diff --git a/drivers/clk/tegra/clk-audio-sync.c b/drivers/clk/tegra/clk-audio-sync.c
new file mode 100644
index 0000000..c0f7843
--- /dev/null
+++ b/drivers/clk/tegra/clk-audio-sync.c
@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include "clk.h"
+
+static unsigned long clk_sync_source_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_sync_source *sync = to_clk_sync_source(hw);
+
+ return sync->rate;
+}
+
+static long clk_sync_source_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct tegra_clk_sync_source *sync = to_clk_sync_source(hw);
+
+ if (rate > sync->max_rate)
+ return -EINVAL;
+ else
+ return rate;
+}
+
+static int clk_sync_source_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_sync_source *sync = to_clk_sync_source(hw);
+
+ sync->rate = rate;
+ return 0;
+}
+
+const struct clk_ops tegra_clk_sync_source_ops = {
+ .round_rate = clk_sync_source_round_rate,
+ .set_rate = clk_sync_source_set_rate,
+ .recalc_rate = clk_sync_source_recalc_rate,
+};
+
+struct clk *tegra_clk_register_sync_source(const char *name,
+ unsigned long rate, unsigned long max_rate)
+{
+ struct tegra_clk_sync_source *sync;
+ struct clk_init_data init;
+ struct clk *clk;
+
+ sync = kzalloc(sizeof(*sync), GFP_KERNEL);
+ if (!sync) {
+ pr_err("%s: could not allocate sync source clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ sync->rate = rate;
+ sync->max_rate = max_rate;
+
+ init.ops = &tegra_clk_sync_source_ops;
+ init.name = name;
+ init.flags = CLK_IS_ROOT;
+ init.parent_names = NULL;
+ init.num_parents = 0;
+
+ /* Data in .init is copied by clk_register(), so stack variable OK */
+ sync->hw.init = &init;
+
+ clk = clk_register(NULL, &sync->hw);
+ if (IS_ERR(clk))
+ kfree(sync);
+
+ return clk;
+}
diff --git a/drivers/clk/tegra/clk-divider.c b/drivers/clk/tegra/clk-divider.c
new file mode 100644
index 0000000..4d75b1f
--- /dev/null
+++ b/drivers/clk/tegra/clk-divider.c
@@ -0,0 +1,187 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+
+#include "clk.h"
+
+#define pll_out_override(p) (BIT((p->shift - 6)))
+#define div_mask(d) ((1 << (d->width)) - 1)
+#define get_mul(d) (1 << d->frac_width)
+#define get_max_div(d) div_mask(d)
+
+#define PERIPH_CLK_UART_DIV_ENB BIT(24)
+
+static int get_div(struct tegra_clk_frac_div *divider, unsigned long rate,
+ unsigned long parent_rate)
+{
+ s64 divider_ux1 = parent_rate;
+ u8 flags = divider->flags;
+ int mul;
+
+ if (!rate)
+ return 0;
+
+ mul = get_mul(divider);
+
+ if (!(flags & TEGRA_DIVIDER_INT))
+ divider_ux1 *= mul;
+
+ if (flags & TEGRA_DIVIDER_ROUND_UP)
+ divider_ux1 += rate - 1;
+
+ do_div(divider_ux1, rate);
+
+ if (flags & TEGRA_DIVIDER_INT)
+ divider_ux1 *= mul;
+
+ divider_ux1 -= mul;
+
+ if (divider_ux1 < 0)
+ return 0;
+
+ if (divider_ux1 > get_max_div(divider))
+ return -EINVAL;
+
+ return divider_ux1;
+}
+
+static unsigned long clk_frac_div_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_frac_div *divider = to_clk_frac_div(hw);
+ u32 reg;
+ int div, mul;
+ u64 rate = parent_rate;
+
+ reg = readl_relaxed(divider->reg) >> divider->shift;
+ div = reg & div_mask(divider);
+
+ mul = get_mul(divider);
+ div += mul;
+
+ rate *= mul;
+ rate += div - 1;
+ do_div(rate, div);
+
+ return rate;
+}
+
+static long clk_frac_div_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct tegra_clk_frac_div *divider = to_clk_frac_div(hw);
+ int div, mul;
+ unsigned long output_rate = *prate;
+
+ if (!rate)
+ return output_rate;
+
+ div = get_div(divider, rate, output_rate);
+ if (div < 0)
+ return *prate;
+
+ mul = get_mul(divider);
+
+ return DIV_ROUND_UP(output_rate * mul, div + mul);
+}
+
+static int clk_frac_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_frac_div *divider = to_clk_frac_div(hw);
+ int div;
+ unsigned long flags = 0;
+ u32 val;
+
+ div = get_div(divider, rate, parent_rate);
+ if (div < 0)
+ return div;
+
+ if (divider->lock)
+ spin_lock_irqsave(divider->lock, flags);
+
+ val = readl_relaxed(divider->reg);
+ val &= ~(div_mask(divider) << divider->shift);
+ val |= div << divider->shift;
+
+ if (divider->flags & TEGRA_DIVIDER_UART) {
+ if (div)
+ val |= PERIPH_CLK_UART_DIV_ENB;
+ else
+ val &= ~PERIPH_CLK_UART_DIV_ENB;
+ }
+
+ if (divider->flags & TEGRA_DIVIDER_FIXED)
+ val |= pll_out_override(divider);
+
+ writel_relaxed(val, divider->reg);
+
+ if (divider->lock)
+ spin_unlock_irqrestore(divider->lock, flags);
+
+ return 0;
+}
+
+const struct clk_ops tegra_clk_frac_div_ops = {
+ .recalc_rate = clk_frac_div_recalc_rate,
+ .set_rate = clk_frac_div_set_rate,
+ .round_rate = clk_frac_div_round_rate,
+};
+
+struct clk *tegra_clk_register_divider(const char *name,
+ const char *parent_name, void __iomem *reg,
+ unsigned long flags, u8 clk_divider_flags, u8 shift, u8 width,
+ u8 frac_width, spinlock_t *lock)
+{
+ struct tegra_clk_frac_div *divider;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ divider = kzalloc(sizeof(*divider), GFP_KERNEL);
+ if (!divider) {
+ pr_err("%s: could not allocate fractional divider clk\n",
+ __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &tegra_clk_frac_div_ops;
+ init.flags = flags;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+
+ divider->reg = reg;
+ divider->shift = shift;
+ divider->width = width;
+ divider->frac_width = frac_width;
+ divider->lock = lock;
+ divider->flags = clk_divider_flags;
+
+ /* Data in .init is copied by clk_register(), so stack variable OK */
+ divider->hw.init = &init;
+
+ clk = clk_register(NULL, ÷r->hw);
+ if (IS_ERR(clk))
+ kfree(divider);
+
+ return clk;
+}
diff --git a/drivers/clk/tegra/clk-periph-gate.c b/drivers/clk/tegra/clk-periph-gate.c
new file mode 100644
index 0000000..6dd5332
--- /dev/null
+++ b/drivers/clk/tegra/clk-periph-gate.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/tegra-soc.h>
+
+#include "clk.h"
+
+static DEFINE_SPINLOCK(periph_ref_lock);
+
+/* Macros to assist peripheral gate clock */
+#define read_enb(gate) \
+ readl_relaxed(gate->clk_base + (gate->regs->enb_reg))
+#define write_enb_set(val, gate) \
+ writel_relaxed(val, gate->clk_base + (gate->regs->enb_set_reg))
+#define write_enb_clr(val, gate) \
+ writel_relaxed(val, gate->clk_base + (gate->regs->enb_clr_reg))
+
+#define read_rst(gate) \
+ readl_relaxed(gate->clk_base + (gate->regs->rst_reg))
+#define write_rst_set(val, gate) \
+ writel_relaxed(val, gate->clk_base + (gate->regs->rst_set_reg))
+#define write_rst_clr(val, gate) \
+ writel_relaxed(val, gate->clk_base + (gate->regs->rst_clr_reg))
+
+#define periph_clk_to_bit(periph) (1 << (gate->clk_num % 32))
+
+/* Peripheral gate clock ops */
+static int clk_periph_is_enabled(struct clk_hw *hw)
+{
+ struct tegra_clk_periph_gate *gate = to_clk_periph_gate(hw);
+ int state = 1;
+
+ if (!(read_enb(gate) & periph_clk_to_bit(gate)))
+ state = 0;
+
+ if (!(gate->flags & TEGRA_PERIPH_NO_RESET))
+ if (read_rst(gate) & periph_clk_to_bit(gate))
+ state = 0;
+
+ return state;
+}
+
+static int clk_periph_enable(struct clk_hw *hw)
+{
+ struct tegra_clk_periph_gate *gate = to_clk_periph_gate(hw);
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&periph_ref_lock, flags);
+
+ gate->enable_refcnt[gate->clk_num]++;
+ if (gate->enable_refcnt[gate->clk_num] > 1) {
+ spin_unlock_irqrestore(&periph_ref_lock, flags);
+ return 0;
+ }
+
+ write_enb_set(periph_clk_to_bit(gate), gate);
+ udelay(2);
+
+ if (!(gate->flags & TEGRA_PERIPH_NO_RESET) &&
+ !(gate->flags & TEGRA_PERIPH_MANUAL_RESET)) {
+ if (read_rst(gate) & periph_clk_to_bit(gate)) {
+ udelay(5); /* reset propogation delay */
+ write_rst_clr(periph_clk_to_bit(gate), gate);
+ }
+ }
+
+ spin_unlock_irqrestore(&periph_ref_lock, flags);
+
+ return 0;
+}
+
+static void clk_periph_disable(struct clk_hw *hw)
+{
+ struct tegra_clk_periph_gate *gate = to_clk_periph_gate(hw);
+ unsigned long flags = 0;
+
+ spin_lock_irqsave(&periph_ref_lock, flags);
+
+ gate->enable_refcnt[gate->clk_num]--;
+ if (gate->enable_refcnt[gate->clk_num] > 0) {
+ spin_unlock_irqrestore(&periph_ref_lock, flags);
+ return;
+ }
+
+ /*
+ * If peripheral is in the APB bus then read the APB bus to
+ * flush the write operation in apb bus. This will avoid the
+ * peripheral access after disabling clock
+ */
+ if (gate->flags & TEGRA_PERIPH_ON_APB)
+ tegra_read_chipid();
+
+ write_enb_clr(periph_clk_to_bit(gate), gate);
+
+ spin_unlock_irqrestore(&periph_ref_lock, flags);
+}
+
+void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert)
+{
+ if (gate->flags & TEGRA_PERIPH_NO_RESET)
+ return;
+
+ if (assert) {
+ /*
+ * If peripheral is in the APB bus then read the APB bus to
+ * flush the write operation in apb bus. This will avoid the
+ * peripheral access after disabling clock
+ */
+ if (gate->flags & TEGRA_PERIPH_ON_APB)
+ tegra_read_chipid();
+
+ write_rst_set(periph_clk_to_bit(gate), gate);
+ } else {
+ write_rst_clr(periph_clk_to_bit(gate), gate);
+ }
+}
+
+const struct clk_ops tegra_clk_periph_gate_ops = {
+ .is_enabled = clk_periph_is_enabled,
+ .enable = clk_periph_enable,
+ .disable = clk_periph_disable,
+};
+
+struct clk *tegra_clk_register_periph_gate(const char *name,
+ const char *parent_name, u8 gate_flags, void __iomem *clk_base,
+ unsigned long flags, int clk_num,
+ struct tegra_clk_periph_regs *pregs, int *enable_refcnt)
+{
+ struct tegra_clk_periph_gate *gate;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate) {
+ pr_err("%s: could not allocate periph gate clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.flags = flags;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+ init.ops = &tegra_clk_periph_gate_ops;
+
+ gate->magic = TEGRA_CLK_PERIPH_GATE_MAGIC;
+ gate->clk_base = clk_base;
+ gate->clk_num = clk_num;
+ gate->flags = gate_flags;
+ gate->enable_refcnt = enable_refcnt;
+ gate->regs = pregs;
+
+ /* Data in .init is copied by clk_register(), so stack variable OK */
+ gate->hw.init = &init;
+
+ clk = clk_register(NULL, &gate->hw);
+ if (IS_ERR(clk))
+ kfree(gate);
+
+ return clk;
+}
diff --git a/drivers/clk/tegra/clk-periph.c b/drivers/clk/tegra/clk-periph.c
new file mode 100644
index 0000000..5978e81
--- /dev/null
+++ b/drivers/clk/tegra/clk-periph.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include "clk.h"
+
+static u8 clk_periph_get_parent(struct clk_hw *hw)
+{
+ struct tegra_clk_periph *periph = to_clk_periph(hw);
+ const struct clk_ops *mux_ops = periph->mux_ops;
+ struct clk_hw *mux_hw = &periph->mux.hw;
+
+ mux_hw->clk = hw->clk;
+
+ return mux_ops->get_parent(mux_hw);
+}
+
+static int clk_periph_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct tegra_clk_periph *periph = to_clk_periph(hw);
+ const struct clk_ops *mux_ops = periph->mux_ops;
+ struct clk_hw *mux_hw = &periph->mux.hw;
+
+ mux_hw->clk = hw->clk;
+
+ return mux_ops->set_parent(mux_hw, index);
+}
+
+static unsigned long clk_periph_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_periph *periph = to_clk_periph(hw);
+ const struct clk_ops *div_ops = periph->div_ops;
+ struct clk_hw *div_hw = &periph->divider.hw;
+
+ div_hw->clk = hw->clk;
+
+ return div_ops->recalc_rate(div_hw, parent_rate);
+}
+
+static long clk_periph_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct tegra_clk_periph *periph = to_clk_periph(hw);
+ const struct clk_ops *div_ops = periph->div_ops;
+ struct clk_hw *div_hw = &periph->divider.hw;
+
+ div_hw->clk = hw->clk;
+
+ return div_ops->round_rate(div_hw, rate, prate);
+}
+
+static int clk_periph_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_periph *periph = to_clk_periph(hw);
+ const struct clk_ops *div_ops = periph->div_ops;
+ struct clk_hw *div_hw = &periph->divider.hw;
+
+ div_hw->clk = hw->clk;
+
+ return div_ops->set_rate(div_hw, rate, parent_rate);
+}
+
+static int clk_periph_is_enabled(struct clk_hw *hw)
+{
+ struct tegra_clk_periph *periph = to_clk_periph(hw);
+ const struct clk_ops *gate_ops = periph->gate_ops;
+ struct clk_hw *gate_hw = &periph->gate.hw;
+
+ gate_hw->clk = hw->clk;
+
+ return gate_ops->is_enabled(gate_hw);
+}
+
+static int clk_periph_enable(struct clk_hw *hw)
+{
+ struct tegra_clk_periph *periph = to_clk_periph(hw);
+ const struct clk_ops *gate_ops = periph->gate_ops;
+ struct clk_hw *gate_hw = &periph->gate.hw;
+
+ gate_hw->clk = hw->clk;
+
+ return gate_ops->enable(gate_hw);
+}
+
+static void clk_periph_disable(struct clk_hw *hw)
+{
+ struct tegra_clk_periph *periph = to_clk_periph(hw);
+ const struct clk_ops *gate_ops = periph->gate_ops;
+ struct clk_hw *gate_hw = &periph->gate.hw;
+
+ gate_ops->disable(gate_hw);
+}
+
+const struct clk_ops tegra_clk_periph_ops = {
+ .get_parent = clk_periph_get_parent,
+ .set_parent = clk_periph_set_parent,
+ .recalc_rate = clk_periph_recalc_rate,
+ .round_rate = clk_periph_round_rate,
+ .set_rate = clk_periph_set_rate,
+ .is_enabled = clk_periph_is_enabled,
+ .enable = clk_periph_enable,
+ .disable = clk_periph_disable,
+};
+
+const struct clk_ops tegra_clk_periph_nodiv_ops = {
+ .get_parent = clk_periph_get_parent,
+ .set_parent = clk_periph_set_parent,
+ .is_enabled = clk_periph_is_enabled,
+ .enable = clk_periph_enable,
+ .disable = clk_periph_disable,
+};
+
+static struct clk *_tegra_clk_register_periph(const char *name,
+ const char **parent_names, int num_parents,
+ struct tegra_clk_periph *periph,
+ void __iomem *clk_base, u32 offset, bool div)
+{
+ struct clk *clk;
+ struct clk_init_data init;
+
+ init.name = name;
+ init.ops = div ? &tegra_clk_periph_ops : &tegra_clk_periph_nodiv_ops;
+ init.flags = div ? 0 : CLK_SET_RATE_PARENT;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
+ /* Data in .init is copied by clk_register(), so stack variable OK */
+ periph->hw.init = &init;
+ periph->magic = TEGRA_CLK_PERIPH_MAGIC;
+ periph->mux.reg = clk_base + offset;
+ periph->divider.reg = div ? (clk_base + offset) : NULL;
+ periph->gate.clk_base = clk_base;
+
+ clk = clk_register(NULL, &periph->hw);
+ if (IS_ERR(clk))
+ return clk;
+
+ periph->mux.hw.clk = clk;
+ periph->divider.hw.clk = div ? clk : NULL;
+ periph->gate.hw.clk = clk;
+
+ return clk;
+}
+
+struct clk *tegra_clk_register_periph(const char *name,
+ const char **parent_names, int num_parents,
+ struct tegra_clk_periph *periph, void __iomem *clk_base,
+ u32 offset)
+{
+ return _tegra_clk_register_periph(name, parent_names, num_parents,
+ periph, clk_base, offset, true);
+}
+
+struct clk *tegra_clk_register_periph_nodiv(const char *name,
+ const char **parent_names, int num_parents,
+ struct tegra_clk_periph *periph, void __iomem *clk_base,
+ u32 offset)
+{
+ return _tegra_clk_register_periph(name, parent_names, num_parents,
+ periph, clk_base, offset, false);
+}
diff --git a/drivers/clk/tegra/clk-pll-out.c b/drivers/clk/tegra/clk-pll-out.c
new file mode 100644
index 0000000..3598987
--- /dev/null
+++ b/drivers/clk/tegra/clk-pll-out.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+
+#include "clk.h"
+
+#define pll_out_enb(p) (BIT(p->enb_bit_idx))
+#define pll_out_rst(p) (BIT(p->rst_bit_idx))
+
+static int clk_pll_out_is_enabled(struct clk_hw *hw)
+{
+ struct tegra_clk_pll_out *pll_out = to_clk_pll_out(hw);
+ u32 val = readl_relaxed(pll_out->reg);
+ int state;
+
+ state = (val & pll_out_enb(pll_out)) ? 1 : 0;
+ if (!(val & (pll_out_rst(pll_out))))
+ state = 0;
+ return state;
+}
+
+static int clk_pll_out_enable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll_out *pll_out = to_clk_pll_out(hw);
+ unsigned long flags = 0;
+ u32 val;
+
+ if (pll_out->lock)
+ spin_lock_irqsave(pll_out->lock, flags);
+
+ val = readl_relaxed(pll_out->reg);
+
+ val |= (pll_out_enb(pll_out) | pll_out_rst(pll_out));
+
+ writel_relaxed(val, pll_out->reg);
+ udelay(2);
+
+ if (pll_out->lock)
+ spin_unlock_irqrestore(pll_out->lock, flags);
+
+ return 0;
+}
+
+static void clk_pll_out_disable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll_out *pll_out = to_clk_pll_out(hw);
+ unsigned long flags = 0;
+ u32 val;
+
+ if (pll_out->lock)
+ spin_lock_irqsave(pll_out->lock, flags);
+
+ val = readl_relaxed(pll_out->reg);
+
+ val &= ~(pll_out_enb(pll_out) | pll_out_rst(pll_out));
+
+ writel_relaxed(val, pll_out->reg);
+ udelay(2);
+
+ if (pll_out->lock)
+ spin_unlock_irqrestore(pll_out->lock, flags);
+}
+
+const struct clk_ops tegra_clk_pll_out_ops = {
+ .is_enabled = clk_pll_out_is_enabled,
+ .enable = clk_pll_out_enable,
+ .disable = clk_pll_out_disable,
+};
+
+struct clk *tegra_clk_register_pll_out(const char *name,
+ const char *parent_name, void __iomem *reg, u8 enb_bit_idx,
+ u8 rst_bit_idx, unsigned long flags, u8 pll_out_flags,
+ spinlock_t *lock)
+{
+ struct tegra_clk_pll_out *pll_out;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll_out = kzalloc(sizeof(*pll_out), GFP_KERNEL);
+ if (!pll_out)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &tegra_clk_pll_out_ops;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ init.flags = flags;
+
+ pll_out->reg = reg;
+ pll_out->enb_bit_idx = enb_bit_idx;
+ pll_out->rst_bit_idx = rst_bit_idx;
+ pll_out->flags = pll_out_flags;
+ pll_out->lock = lock;
+
+ /* Data in .init is copied by clk_register(), so stack variable OK */
+ pll_out->hw.init = &init;
+
+ clk = clk_register(NULL, &pll_out->hw);
+ if (IS_ERR(clk))
+ kfree(pll_out);
+
+ return clk;
+}
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
new file mode 100644
index 0000000..8dff93f
--- /dev/null
+++ b/drivers/clk/tegra/clk-pll.c
@@ -0,0 +1,648 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+
+#include "clk.h"
+
+#define PLL_BASE_BYPASS BIT(31)
+#define PLL_BASE_ENABLE BIT(30)
+#define PLL_BASE_REF_ENABLE BIT(29)
+#define PLL_BASE_OVERRIDE BIT(28)
+
+#define PLL_BASE_DIVP_SHIFT 20
+#define PLL_BASE_DIVP_WIDTH 3
+#define PLL_BASE_DIVN_SHIFT 8
+#define PLL_BASE_DIVN_WIDTH 10
+#define PLL_BASE_DIVM_SHIFT 0
+#define PLL_BASE_DIVM_WIDTH 5
+#define PLLU_POST_DIVP_MASK 0x1
+
+#define PLL_MISC_DCCON_SHIFT 20
+#define PLL_MISC_CPCON_SHIFT 8
+#define PLL_MISC_CPCON_WIDTH 4
+#define PLL_MISC_CPCON_MASK ((1 << PLL_MISC_CPCON_WIDTH) - 1)
+#define PLL_MISC_LFCON_SHIFT 4
+#define PLL_MISC_LFCON_WIDTH 4
+#define PLL_MISC_LFCON_MASK ((1 << PLL_MISC_LFCON_WIDTH) - 1)
+#define PLL_MISC_VCOCON_SHIFT 0
+#define PLL_MISC_VCOCON_WIDTH 4
+#define PLL_MISC_VCOCON_MASK ((1 << PLL_MISC_VCOCON_WIDTH) - 1)
+
+#define OUT_OF_TABLE_CPCON 8
+
+#define PMC_PLLP_WB0_OVERRIDE 0xf8
+#define PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE BIT(12)
+#define PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE BIT(11)
+
+#define PLL_POST_LOCK_DELAY 50
+
+#define PLLDU_LFCON_SET_DIVN 600
+
+#define PLLE_BASE_DIVCML_SHIFT 24
+#define PLLE_BASE_DIVCML_WIDTH 4
+#define PLLE_BASE_DIVP_SHIFT 16
+#define PLLE_BASE_DIVP_WIDTH 7
+#define PLLE_BASE_DIVN_SHIFT 8
+#define PLLE_BASE_DIVN_WIDTH 8
+#define PLLE_BASE_DIVM_SHIFT 0
+#define PLLE_BASE_DIVM_WIDTH 8
+
+#define PLLE_MISC_SETUP_BASE_SHIFT 16
+#define PLLE_MISC_SETUP_BASE_MASK (0xffff << PLLE_MISC_SETUP_BASE_SHIFT)
+#define PLLE_MISC_LOCK_ENABLE BIT(9)
+#define PLLE_MISC_READY BIT(15)
+#define PLLE_MISC_SETUP_EX_SHIFT 2
+#define PLLE_MISC_SETUP_EX_MASK (3 << PLLE_MISC_SETUP_EX_SHIFT)
+#define PLLE_MISC_SETUP_MASK (PLLE_MISC_SETUP_BASE_MASK | \
+ PLLE_MISC_SETUP_EX_MASK)
+#define PLLE_MISC_SETUP_VALUE (7 << PLLE_MISC_SETUP_BASE_SHIFT)
+
+#define PLLE_SS_CTRL 0x68
+#define PLLE_SS_DISABLE (7 << 10)
+
+#define PMC_SATA_PWRGT 0x1ac
+#define PMC_SATA_PWRGT_PLLE_IDDQ_VALUE BIT(5)
+#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL BIT(4)
+
+#define pll_readl(offset, p) readl_relaxed(p->clk_base + offset)
+#define pll_readl_base(p) pll_readl(p->params->base_reg, p)
+#define pll_readl_misc(p) pll_readl(p->params->misc_reg, p)
+
+#define pll_writel(val, offset, p) writel_relaxed(val, p->clk_base + offset)
+#define pll_writel_base(val, p) pll_writel(val, p->params->base_reg, p)
+#define pll_writel_misc(val, p) pll_writel(val, p->params->misc_reg, p)
+
+#define mask(w) ((1 << (w)) - 1)
+#define divm_mask(p) mask(p->divm_width)
+#define divn_mask(p) mask(p->divn_width)
+#define divp_mask(p) (p->flags & TEGRA_PLLU ? PLLU_POST_DIVP_MASK : \
+ mask(p->divp_width))
+
+#define divm_max(p) (divm_mask(p))
+#define divn_max(p) (divn_mask(p))
+#define divp_max(p) (1 << (divp_mask(p)))
+
+static void clk_pll_enable_lock(struct tegra_clk_pll *pll)
+{
+ u32 val;
+
+ if (!(pll->flags & TEGRA_PLL_USE_LOCK))
+ return;
+
+ val = pll_readl_misc(pll);
+ val |= BIT(pll->params->lock_enable_bit_idx);
+ pll_writel_misc(val, pll);
+}
+
+static int clk_pll_wait_for_lock(struct tegra_clk_pll *pll,
+ void __iomem *lock_addr, u32 lock_bit_idx)
+{
+ int i;
+ u32 val;
+
+ if (!(pll->flags & TEGRA_PLL_USE_LOCK)) {
+ udelay(pll->params->lock_delay);
+ return 0;
+ }
+
+ for (i = 0; i < pll->params->lock_delay; i++) {
+ val = readl_relaxed(lock_addr);
+ if (val & BIT(lock_bit_idx)) {
+ udelay(PLL_POST_LOCK_DELAY);
+ return 0;
+ }
+ udelay(2); /* timeout = 2 * lock time */
+ }
+
+ pr_err("%s: Timed out waiting for pll %s lock\n", __func__,
+ __clk_get_name(pll->hw.clk));
+
+ return -1;
+}
+
+static int clk_pll_is_enabled(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ u32 val;
+
+ if (pll->flags & TEGRA_PLLM) {
+ val = readl_relaxed(pll->pmc + PMC_PLLP_WB0_OVERRIDE);
+ if (val & PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE)
+ return val & PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE ? 1 : 0;
+ }
+
+ val = pll_readl_base(pll);
+
+ return val & PLL_BASE_ENABLE ? 1 : 0;
+}
+
+static int _clk_pll_enable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ u32 val;
+
+ clk_pll_enable_lock(pll);
+
+ val = pll_readl_base(pll);
+ val &= ~PLL_BASE_BYPASS;
+ val |= PLL_BASE_ENABLE;
+ pll_writel_base(val, pll);
+
+ if (pll->flags & TEGRA_PLLM) {
+ val = readl_relaxed(pll->pmc + PMC_PLLP_WB0_OVERRIDE);
+ val |= PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE;
+ writel_relaxed(val, pll->pmc + PMC_PLLP_WB0_OVERRIDE);
+ }
+
+ clk_pll_wait_for_lock(pll, pll->clk_base + pll->params->base_reg,
+ pll->params->lock_bit_idx);
+
+ return 0;
+}
+
+static void _clk_pll_disable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ u32 val;
+
+ val = pll_readl_base(pll);
+ val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
+ pll_writel_base(val, pll);
+
+ if (pll->flags & TEGRA_PLLM) {
+ val = readl_relaxed(pll->pmc + PMC_PLLP_WB0_OVERRIDE);
+ val &= ~PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE;
+ writel_relaxed(val, pll->pmc + PMC_PLLP_WB0_OVERRIDE);
+ }
+}
+
+static int clk_pll_enable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ int ret;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ ret = _clk_pll_enable(hw);
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
+static void clk_pll_disable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _clk_pll_disable(hw);
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+}
+
+static int _get_table_rate(struct clk_hw *hw,
+ struct tegra_clk_pll_freq_table *cfg,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ struct tegra_clk_pll_freq_table *sel;
+
+ for (sel = pll->freq_table; sel->input_rate != 0; sel++)
+ if (sel->input_rate == parent_rate &&
+ sel->output_rate == rate)
+ break;
+
+ if (sel->input_rate == 0)
+ return -EINVAL;
+
+ BUG_ON(sel->p < 1);
+
+ cfg->input_rate = sel->input_rate;
+ cfg->output_rate = sel->output_rate;
+ cfg->m = sel->m;
+ cfg->n = sel->n;
+ cfg->p = sel->p;
+ cfg->cpcon = sel->cpcon;
+
+ return 0;
+}
+
+static int _calc_rate(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long cfreq;
+ u32 p_div = 0;
+
+ switch (parent_rate) {
+ case 12000000:
+ case 26000000:
+ cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2000000;
+ break;
+ case 13000000:
+ cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2600000;
+ break;
+ case 16800000:
+ case 19200000:
+ cfreq = (rate <= 1200000 * 1000) ? 1200000 : 2400000;
+ break;
+ case 9600000:
+ case 28800000:
+ /*
+ * PLL_P_OUT1 rate is not listed in PLLA table
+ */
+ cfreq = parent_rate/(parent_rate/1000000);
+ break;
+ default:
+ pr_err("%s Unexpected reference rate %lu\n",
+ __func__, parent_rate);
+ BUG();
+ }
+
+ /* Raise VCO to guarantee 0.5% accuracy */
+ for (cfg->output_rate = rate; cfg->output_rate < 200 * cfreq;
+ cfg->output_rate <<= 1)
+ p_div++;
+
+ cfg->p = 1 << p_div;
+ cfg->m = parent_rate / cfreq;
+ cfg->n = cfg->output_rate / cfreq;
+ cfg->cpcon = OUT_OF_TABLE_CPCON;
+
+ if (cfg->m > divm_max(pll) || cfg->n > divn_max(pll) ||
+ cfg->p > divp_max(pll) || cfg->output_rate > pll->params->vco_max) {
+ pr_err("%s: Failed to set %s rate %lu\n",
+ __func__, __clk_get_name(hw->clk), rate);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
+ unsigned long rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ u32 divp, val, old_base;
+ int state;
+
+ divp = __ffs(cfg->p);
+
+ if (pll->flags & TEGRA_PLLU)
+ divp ^= 1;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ old_base = val = pll_readl_base(pll);
+ val &= ~((divm_mask(pll) << pll->divm_shift) |
+ (divn_mask(pll) << pll->divn_shift) |
+ (divp_mask(pll) << pll->divp_shift));
+ val |= ((cfg->m << pll->divm_shift) |
+ (cfg->n << pll->divn_shift) |
+ (divp << pll->divp_shift));
+ if (val == old_base) {
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+ return 0;
+ }
+
+ state = clk_pll_is_enabled(hw);
+
+ if (state) {
+ _clk_pll_disable(hw);
+ val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
+ }
+ pll_writel_base(val, pll);
+
+ if (pll->flags & TEGRA_PLL_HAS_CPCON) {
+ val = pll_readl_misc(pll);
+ val &= ~(PLL_MISC_CPCON_MASK << PLL_MISC_CPCON_SHIFT);
+ val |= cfg->cpcon << PLL_MISC_CPCON_SHIFT;
+ if (pll->flags & TEGRA_PLL_SET_LFCON) {
+ val &= ~(PLL_MISC_LFCON_MASK << PLL_MISC_LFCON_SHIFT);
+ if (cfg->n >= PLLDU_LFCON_SET_DIVN)
+ val |= 0x1 << PLL_MISC_LFCON_SHIFT;
+ } else if (pll->flags & TEGRA_PLL_SET_DCCON) {
+ val &= ~(0x1 << PLL_MISC_DCCON_SHIFT);
+ if (rate >= (pll->params->vco_max >> 1))
+ val |= 0x1 << PLL_MISC_DCCON_SHIFT;
+ }
+ pll_writel_misc(val, pll);
+ }
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ if (state)
+ clk_pll_enable(hw);
+
+ return 0;
+}
+
+static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ struct tegra_clk_pll_freq_table cfg;
+
+ if (pll->flags & TEGRA_PLL_FIXED) {
+ if (rate != pll->fixed_rate) {
+ pr_err("%s: Can not change %s fixed rate %lu to %lu\n",
+ __func__, __clk_get_name(hw->clk),
+ pll->fixed_rate, rate);
+ return -EINVAL;
+ }
+ return 0;
+ }
+
+ if (_get_table_rate(hw, &cfg, rate, parent_rate) &&
+ _calc_rate(hw, &cfg, rate, parent_rate))
+ return -EINVAL;
+
+ return _program_pll(hw, &cfg, rate);
+}
+
+static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ struct tegra_clk_pll_freq_table cfg;
+ u64 output_rate = *prate;
+
+ if (pll->flags & TEGRA_PLL_FIXED)
+ return pll->fixed_rate;
+
+ /* PLLM is used for memory; we do not change rate */
+ if (pll->flags & TEGRA_PLLM)
+ return __clk_get_rate(hw->clk);
+
+ if (_get_table_rate(hw, &cfg, rate, *prate) &&
+ _calc_rate(hw, &cfg, rate, *prate))
+ return -EINVAL;
+
+ output_rate *= cfg.n;
+ do_div(output_rate, cfg.m * cfg.p);
+
+ return output_rate;
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ u32 val = pll_readl_base(pll);
+ u32 divn = 0, divm = 0, divp = 0;
+ u64 rate = parent_rate;
+
+ if (val & PLL_BASE_BYPASS)
+ return parent_rate;
+
+ if ((pll->flags & TEGRA_PLL_FIXED) && !(val & PLL_BASE_OVERRIDE)) {
+ struct tegra_clk_pll_freq_table sel;
+ if (_get_table_rate(hw, &sel, pll->fixed_rate, parent_rate)) {
+ pr_err("Clock %s has unknown fixed frequency\n",
+ __clk_get_name(hw->clk));
+ BUG();
+ }
+ return pll->fixed_rate;
+ }
+
+ divp = (val >> pll->divp_shift) & (divp_mask(pll));
+ if (pll->flags & TEGRA_PLLU)
+ divp ^= 1;
+
+ divn = (val >> pll->divn_shift) & (divn_mask(pll));
+ divm = (val >> pll->divm_shift) & (divm_mask(pll));
+ divm *= (1 << divp);
+
+ rate *= divn;
+ do_div(rate, divm);
+ return rate;
+}
+
+static int clk_plle_training(struct tegra_clk_pll *pll)
+{
+ u32 val;
+ unsigned long timeout;
+
+ if (!pll->pmc)
+ return -ENOSYS;
+
+ /*
+ * PLLE is already disabled, and setup cleared;
+ * create falling edge on PLLE IDDQ input.
+ */
+ val = readl(pll->pmc + PMC_SATA_PWRGT);
+ val |= PMC_SATA_PWRGT_PLLE_IDDQ_VALUE;
+ writel(val, pll->pmc + PMC_SATA_PWRGT);
+
+ val = readl(pll->pmc + PMC_SATA_PWRGT);
+ val |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL;
+ writel(val, pll->pmc + PMC_SATA_PWRGT);
+
+ val = readl(pll->pmc + PMC_SATA_PWRGT);
+ val &= ~PMC_SATA_PWRGT_PLLE_IDDQ_VALUE;
+ writel(val, pll->pmc + PMC_SATA_PWRGT);
+
+ val = pll_readl_misc(pll);
+
+ timeout = jiffies + msecs_to_jiffies(100);
+ while (1) {
+ val = pll_readl_misc(pll);
+ if (val & PLLE_MISC_READY)
+ break;
+ if (time_after(jiffies, timeout)) {
+ pr_err("%s: timeout waiting for PLLE\n", __func__);
+ return -EBUSY;
+ }
+ udelay(300);
+ }
+
+ return 0;
+}
+
+static int clk_plle_enable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long input_rate = clk_get_rate(clk_get_parent(hw->clk));
+ struct tegra_clk_pll_freq_table sel;
+ u32 val;
+ int err;
+
+ if (_get_table_rate(hw, &sel, pll->fixed_rate, input_rate))
+ return -EBUSY;
+
+ clk_pll_disable(hw);
+
+ val = pll_readl_misc(pll);
+ val &= ~(PLLE_MISC_LOCK_ENABLE | PLLE_MISC_SETUP_MASK);
+ pll_writel_misc(val, pll);
+
+ val = pll_readl_misc(pll);
+ if (!(val & PLLE_MISC_READY)) {
+ err = clk_plle_training(pll);
+ if (err)
+ return err;
+ }
+
+ if (pll->flags & TEGRA_PLLE_CONFIGURE) {
+ /* configure dividers */
+ val = pll_readl_base(pll);
+ val &= ~(divm_mask(pll) | divn_mask(pll) | divp_mask(pll));
+ val &= ~(PLLE_BASE_DIVCML_WIDTH << PLLE_BASE_DIVCML_SHIFT);
+ val |= sel.m << pll->divm_shift;
+ val |= sel.n << pll->divn_shift;
+ val |= sel.p << pll->divp_shift;
+ val |= sel.cpcon << PLLE_BASE_DIVCML_SHIFT;
+ pll_writel_base(val, pll);
+ }
+
+ val = pll_readl_misc(pll);
+ val |= PLLE_MISC_SETUP_VALUE;
+ val |= PLLE_MISC_LOCK_ENABLE;
+ pll_writel_misc(val, pll);
+
+ val = readl(pll->clk_base + PLLE_SS_CTRL);
+ val |= PLLE_SS_DISABLE;
+ writel(val, pll->clk_base + PLLE_SS_CTRL);
+
+ val |= pll_readl_base(pll);
+ val |= (PLL_BASE_BYPASS | PLL_BASE_ENABLE);
+ pll_writel_base(val, pll);
+
+ clk_pll_wait_for_lock(pll, pll->clk_base + pll->params->misc_reg,
+ pll->params->lock_bit_idx);
+ return 0;
+}
+
+static unsigned long clk_plle_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ u32 val = pll_readl_base(pll);
+ u32 divn = 0, divm = 0, divp = 0;
+ u64 rate = parent_rate;
+
+ divp = (val >> pll->divp_shift) & (divp_mask(pll));
+ divn = (val >> pll->divn_shift) & (divn_mask(pll));
+ divm = (val >> pll->divm_shift) & (divm_mask(pll));
+ divm *= divp;
+
+ rate *= divn;
+ do_div(rate, divm);
+ return rate;
+}
+
+const struct clk_ops tegra_clk_pll_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_pll_enable,
+ .disable = clk_pll_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_round_rate,
+ .set_rate = clk_pll_set_rate,
+};
+
+const struct clk_ops tegra_clk_plle_ops = {
+ .recalc_rate = clk_plle_recalc_rate,
+ .is_enabled = clk_pll_is_enabled,
+ .disable = clk_pll_disable,
+ .enable = clk_plle_enable,
+};
+
+static struct clk *_tegra_clk_register_pll(const char *name,
+ const char *parent_name, void __iomem *clk_base,
+ void __iomem *pmc, unsigned long flags,
+ unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock,
+ bool plle)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = plle ? &tegra_clk_plle_ops : &tegra_clk_pll_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ pll->clk_base = clk_base;
+ pll->pmc = pmc;
+
+ pll->freq_table = freq_table;
+ pll->params = pll_params;
+ pll->fixed_rate = fixed_rate;
+ pll->flags = pll_flags;
+ pll->lock = lock;
+
+ pll->divp_shift = PLL_BASE_DIVP_SHIFT;
+ pll->divp_width = PLL_BASE_DIVP_WIDTH;
+ pll->divn_shift = PLL_BASE_DIVN_SHIFT;
+ pll->divn_width = PLL_BASE_DIVN_WIDTH;
+ pll->divm_shift = PLL_BASE_DIVM_SHIFT;
+ pll->divm_width = PLL_BASE_DIVM_WIDTH;
+
+ /* Data in .init is copied by clk_register(), so stack variable OK */
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+{
+ return _tegra_clk_register_pll(name, parent_name, clk_base, pmc,
+ flags, fixed_rate, pll_params, pll_flags, freq_table,
+ lock, false);
+}
+
+struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+{
+ return _tegra_clk_register_pll(name, parent_name, clk_base, pmc,
+ flags, fixed_rate, pll_params, pll_flags, freq_table,
+ lock, true);
+}
diff --git a/drivers/clk/tegra/clk-super.c b/drivers/clk/tegra/clk-super.c
new file mode 100644
index 0000000..7ad48a8
--- /dev/null
+++ b/drivers/clk/tegra/clk-super.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+
+#include "clk.h"
+
+#define SUPER_STATE_IDLE 0
+#define SUPER_STATE_RUN 1
+#define SUPER_STATE_IRQ 2
+#define SUPER_STATE_FIQ 3
+
+#define SUPER_STATE_SHIFT 28
+#define SUPER_STATE_MASK ((BIT(SUPER_STATE_IDLE) | BIT(SUPER_STATE_RUN) | \
+ BIT(SUPER_STATE_IRQ) | BIT(SUPER_STATE_FIQ)) \
+ << SUPER_STATE_SHIFT)
+
+#define SUPER_LP_DIV2_BYPASS (1 << 16)
+
+#define super_state(s) (BIT(s) << SUPER_STATE_SHIFT)
+#define super_state_to_src_shift(m, s) ((m->width * s))
+#define super_state_to_src_mask(m) (((1 << m->width) - 1))
+
+static u8 clk_super_get_parent(struct clk_hw *hw)
+{
+ struct tegra_clk_super_mux *mux = to_clk_super_mux(hw);
+ u32 val, state;
+ u8 source, shift;
+
+ val = readl_relaxed(mux->reg);
+
+ state = val & SUPER_STATE_MASK;
+
+ BUG_ON((state != super_state(SUPER_STATE_RUN)) &&
+ (state != super_state(SUPER_STATE_IDLE)));
+ shift = (state == super_state(SUPER_STATE_IDLE)) ?
+ super_state_to_src_shift(mux, SUPER_STATE_IDLE) :
+ super_state_to_src_shift(mux, SUPER_STATE_RUN);
+
+ source = (val >> shift) & super_state_to_src_mask(mux);
+
+ /*
+ * If LP_DIV2_BYPASS is not set and PLLX is current parent then
+ * PLLX/2 is the input source to CCLKLP.
+ */
+ if ((mux->flags & TEGRA_DIVIDER_2) && !(val & SUPER_LP_DIV2_BYPASS) &&
+ (source == mux->pllx_index))
+ source = mux->div2_index;
+
+ return source;
+}
+
+static int clk_super_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct tegra_clk_super_mux *mux = to_clk_super_mux(hw);
+ u32 val, state;
+ u8 parent_index, shift;
+
+ val = readl_relaxed(mux->reg);
+ state = val & SUPER_STATE_MASK;
+ BUG_ON((state != super_state(SUPER_STATE_RUN)) &&
+ (state != super_state(SUPER_STATE_IDLE)));
+ shift = (state == super_state(SUPER_STATE_IDLE)) ?
+ super_state_to_src_shift(mux, SUPER_STATE_IDLE) :
+ super_state_to_src_shift(mux, SUPER_STATE_RUN);
+
+ /*
+ * For LP mode super-clock switch between PLLX direct
+ * and divided-by-2 outputs is allowed only when other
+ * than PLLX clock source is current parent.
+ */
+ if ((mux->flags & TEGRA_DIVIDER_2) && ((index == mux->div2_index) ||
+ (index == mux->pllx_index))) {
+ parent_index = clk_super_get_parent(hw);
+ if ((parent_index == mux->div2_index) ||
+ (parent_index == mux->pllx_index))
+ return -EINVAL;
+
+ val ^= SUPER_LP_DIV2_BYPASS;
+ writel_relaxed(val, mux->reg);
+ udelay(2);
+
+ if (index == mux->div2_index)
+ index = mux->pllx_index;
+ }
+ val &= ~((super_state_to_src_mask(mux)) << shift);
+ val |= (index & (super_state_to_src_mask(mux))) << shift;
+
+ writel_relaxed(val, mux->reg);
+ udelay(2);
+ return 0;
+}
+
+const struct clk_ops tegra_clk_super_ops = {
+ .get_parent = clk_super_get_parent,
+ .set_parent = clk_super_set_parent,
+};
+
+struct clk *tegra_clk_register_super_mux(const char *name,
+ const char **parent_names, u8 num_parents,
+ unsigned long flags, void __iomem *reg, u8 clk_super_flags,
+ u8 width, u8 pllx_index, u8 div2_index, spinlock_t *lock)
+{
+ struct tegra_clk_super_mux *super;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ super = kzalloc(sizeof(*super), GFP_KERNEL);
+ if (!super) {
+ pr_err("%s: could not allocate super clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &tegra_clk_super_ops;
+ init.flags = flags;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
+ super->reg = reg;
+ super->pllx_index = pllx_index;
+ super->div2_index = div2_index;
+ super->lock = lock;
+ super->width = width;
+ super->flags = clk_super_flags;
+
+ /* Data in .init is copied by clk_register(), so stack variable OK */
+ super->hw.init = &init;
+
+ clk = clk_register(NULL, &super->hw);
+ if (IS_ERR(clk))
+ kfree(super);
+
+ return clk;
+}
diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c
new file mode 100644
index 0000000..cf023a9
--- /dev/null
+++ b/drivers/clk/tegra/clk.c
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+#include "clk.h"
+
+void __init tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
+ struct clk *clks[], int clk_max)
+{
+ struct clk *clk;
+
+ for (; dup_list->clk_id < clk_max; dup_list++) {
+ clk = clks[dup_list->clk_id];
+ dup_list->lookup.clk = clk;
+ clkdev_add(&dup_list->lookup);
+ }
+}
+
+void __init tegra_init_from_table(struct tegra_clk_init_table *tbl,
+ struct clk *clks[], int clk_max)
+{
+ struct clk *clk;
+
+ for (; tbl->clk_id < clk_max; tbl++) {
+ clk = clks[tbl->clk_id];
+ if (IS_ERR_OR_NULL(clk))
+ return;
+
+ if (tbl->parent_id < clk_max) {
+ struct clk *parent = clks[tbl->parent_id];
+ if (clk_set_parent(clk, parent)) {
+ pr_err("%s: Failed to set parent %s of %s\n",
+ __func__, __clk_get_name(parent),
+ __clk_get_name(clk));
+ WARN_ON(1);
+ }
+ }
+
+ if (tbl->rate)
+ if (clk_set_rate(clk, tbl->rate)) {
+ pr_err("%s: Failed to set rate %lu of %s\n",
+ __func__, tbl->rate,
+ __clk_get_name(clk));
+ WARN_ON(1);
+ }
+
+ if (tbl->state)
+ if (clk_prepare_enable(clk)) {
+ pr_err("%s: Failed to enable %s\n", __func__,
+ __clk_get_name(clk));
+ WARN_ON(1);
+ }
+ }
+}
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
new file mode 100644
index 0000000..5fcfa51
--- /dev/null
+++ b/drivers/clk/tegra/clk.h
@@ -0,0 +1,490 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __TEGRA_CLK_H
+#define __TEGRA_CLK_H
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+/**
+ * struct tegra_clk_sync_source - external clock source from codec
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @rate: input frequency from source
+ * @max_rate: max rate allowed
+ */
+struct tegra_clk_sync_source {
+ struct clk_hw hw;
+ unsigned long rate;
+ unsigned long max_rate;
+};
+
+#define to_clk_sync_source(_hw) \
+ container_of(_hw, struct tegra_clk_sync_source, hw)
+
+extern const struct clk_ops tegra_clk_sync_source_ops;
+struct clk *tegra_clk_register_sync_source(const char *name,
+ unsigned long fixed_rate, unsigned long max_rate);
+
+/**
+ * struct tegra_clk_frac_div - fractional divider clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @reg: register containing divider
+ * @flags: hardware-specific flags
+ * @shift: shift to the divider bit field
+ * @width: width of the divider bit field
+ * @frac_width: width of the fractional bit field
+ * @lock: register lock
+ *
+ * Flags:
+ * TEGRA_DIVIDER_ROUND_UP - This flags indicates to round up the divider value.
+ * TEGRA_DIVIDER_FIXED - Fixed rate PLL dividers has addition override bit, this
+ * flag indicates that this divider is for fixed rate PLL.
+ * TEGRA_DIVIDER_INT - Some modules can not cope with the duty cycle when
+ * fraction bit is set. This flags indicates to calculate divider for which
+ * fracton bit will be zero.
+ * TEGRA_DIVIDER_UART - UART module divider has additional enable bit which is
+ * set when divider value is not 0. This flags indicates that the divider
+ * is for UART module.
+ */
+struct tegra_clk_frac_div {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 flags;
+ u8 shift;
+ u8 width;
+ u8 frac_width;
+ spinlock_t *lock;
+};
+
+#define to_clk_frac_div(_hw) container_of(_hw, struct tegra_clk_frac_div, hw)
+
+#define TEGRA_DIVIDER_ROUND_UP BIT(0)
+#define TEGRA_DIVIDER_FIXED BIT(1)
+#define TEGRA_DIVIDER_INT BIT(2)
+#define TEGRA_DIVIDER_UART BIT(3)
+
+extern const struct clk_ops tegra_clk_frac_div_ops;
+struct clk *tegra_clk_register_divider(const char *name,
+ const char *parent_name, void __iomem *reg,
+ unsigned long flags, u8 clk_divider_flags, u8 shift, u8 width,
+ u8 frac_width, spinlock_t *lock);
+
+/*
+ * Tegra PLL:
+ *
+ * In general, there are 3 requirements for each PLL
+ * that SW needs to be comply with.
+ * (1) Input frequency range (REF).
+ * (2) Comparison frequency range (CF). CF = REF/DIVM.
+ * (3) VCO frequency range (VCO). VCO = CF * DIVN.
+ *
+ * The final PLL output frequency (FO) = VCO >> DIVP.
+ */
+
+/**
+ * struct tegra_clk_pll_freq_table - PLL frequecy table
+ *
+ * @input_rate: input rate from source
+ * @output_rate: output rate from PLL for the input rate
+ * @n: feedback divider
+ * @m: input divider
+ * @p: post divider
+ * @cpcon: charge pump current
+ */
+struct tegra_clk_pll_freq_table {
+ unsigned long input_rate;
+ unsigned long output_rate;
+ u16 n;
+ u16 m;
+ u8 p;
+ u8 cpcon;
+};
+
+/**
+ * struct clk_pll_params - PLL parameters
+ *
+ * @input_min: Minimum input frequency
+ * @input_max: Maximum input frequency
+ * @cf_min: Minimum comparison frequency
+ * @cf_max: Maximum comparison frequency
+ * @vco_min: Minimum VCO frequency
+ * @vco_max: Maximum VCO frequency
+ * @base_reg: PLL base reg offset
+ * @misc_reg: PLL misc reg offset
+ * @lock_reg: PLL lock reg offset
+ * @lock_bit_idx: Bit index for PLL lock status
+ * @lock_enable_bit_idx: Bit index to enable PLL lock
+ * @lock_delay: Delay in us if PLL lock is not used
+ */
+struct tegra_clk_pll_params {
+ unsigned long input_min;
+ unsigned long input_max;
+ unsigned long cf_min;
+ unsigned long cf_max;
+ unsigned long vco_min;
+ unsigned long vco_max;
+
+ u32 base_reg;
+ u32 misc_reg;
+ u32 lock_reg;
+ u32 lock_bit_idx;
+ u32 lock_enable_bit_idx;
+ int lock_delay;
+};
+
+/**
+ * struct tegra_clk_pll - Tegra PLL clock
+ *
+ * @hw: handle between common and hardware-specifix interfaces
+ * @clk_base: address of CAR controller
+ * @pmc: address of PMC, required to read override bits
+ * @freq_table: array of frequencies supported by PLL
+ * @params: PLL parameters
+ * @flags: PLL flags
+ * @fixed_rate: PLL rate if it is fixed
+ * @lock: register lock
+ * @divn_shift: shift to the feedback divider bit field
+ * @divn_width: width of the feedback divider bit field
+ * @divm_shift: shift to the input divider bit field
+ * @divm_width: width of the input divider bit field
+ * @divp_shift: shift to the post divider bit field
+ * @divp_width: width of the post divider bit field
+ *
+ * Flags:
+ * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
+ * PLL locking. If not set it will use lock_delay value to wait.
+ * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs
+ * to be programmed to change output frequency of the PLL.
+ * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs
+ * to be programmed to change output frequency of the PLL.
+ * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs
+ * to be programmed to change output frequency of the PLL.
+ * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated
+ * that it is PLLU and invert post divider value.
+ * TEGRA_PLLM - PLLM has additional override settings in PMC. This
+ * flag indicates that it is PLLM and use override settings.
+ * TEGRA_PLL_FIXED - We are not supposed to change output frequency
+ * of some plls.
+ * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
+ */
+struct tegra_clk_pll {
+ struct clk_hw hw;
+ void __iomem *clk_base;
+ void __iomem *pmc;
+ u8 flags;
+ unsigned long fixed_rate;
+ spinlock_t *lock;
+ u8 divn_shift;
+ u8 divn_width;
+ u8 divm_shift;
+ u8 divm_width;
+ u8 divp_shift;
+ u8 divp_width;
+ struct tegra_clk_pll_freq_table *freq_table;
+ struct tegra_clk_pll_params *params;
+};
+
+#define to_clk_pll(_hw) container_of(_hw, struct tegra_clk_pll, hw)
+
+#define TEGRA_PLL_USE_LOCK BIT(0)
+#define TEGRA_PLL_HAS_CPCON BIT(1)
+#define TEGRA_PLL_SET_LFCON BIT(2)
+#define TEGRA_PLL_SET_DCCON BIT(3)
+#define TEGRA_PLLU BIT(4)
+#define TEGRA_PLLM BIT(5)
+#define TEGRA_PLL_FIXED BIT(6)
+#define TEGRA_PLLE_CONFIGURE BIT(7)
+
+extern const struct clk_ops tegra_clk_pll_ops;
+extern const struct clk_ops tegra_clk_plle_ops;
+struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
+struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
+
+/**
+ * struct tegra_clk_pll_out - PLL divider down clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @reg: register containing the PLL divider
+ * @enb_bit_idx: bit to enable/disable PLL divider
+ * @rst_bit_idx: bit to reset PLL divider
+ * @lock: register lock
+ * @flags: hardware-specific flags
+ */
+struct tegra_clk_pll_out {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 enb_bit_idx;
+ u8 rst_bit_idx;
+ spinlock_t *lock;
+ u8 flags;
+};
+
+#define to_clk_pll_out(_hw) container_of(_hw, struct tegra_clk_pll_out, hw)
+
+extern const struct clk_ops tegra_clk_pll_out_ops;
+struct clk *tegra_clk_register_pll_out(const char *name,
+ const char *parent_name, void __iomem *reg, u8 enb_bit_idx,
+ u8 rst_bit_idx, unsigned long flags, u8 pll_div_flags,
+ spinlock_t *lock);
+
+/**
+ * struct tegra_clk_periph_regs - Registers controlling peripheral clock
+ *
+ * @enb_reg: read the enable status
+ * @enb_set_reg: write 1 to enable clock
+ * @enb_clr_reg: write 1 to disable clock
+ * @rst_reg: read the reset status
+ * @rst_set_reg: write 1 to assert the reset of peripheral
+ * @rst_clr_reg: write 1 to deassert the reset of peripheral
+ */
+struct tegra_clk_periph_regs {
+ u32 enb_reg;
+ u32 enb_set_reg;
+ u32 enb_clr_reg;
+ u32 rst_reg;
+ u32 rst_set_reg;
+ u32 rst_clr_reg;
+};
+
+/**
+ * struct tegra_clk_periph_gate - peripheral gate clock
+ *
+ * @magic: magic number to validate type
+ * @hw: handle between common and hardware-specific interfaces
+ * @clk_base: address of CAR controller
+ * @regs: Registers to control the peripheral
+ * @flags: hardware-specific flags
+ * @clk_num: Clock number
+ * @enable_refcnt: array to maintain reference count of the clock
+ *
+ * Flags:
+ * TEGRA_PERIPH_NO_RESET - This flag indicates that reset is not allowed
+ * for this module.
+ * TEGRA_PERIPH_MANUAL_RESET - This flag indicates not to reset module
+ * after clock enable and driver for the module is responsible for
+ * doing reset.
+ * TEGRA_PERIPH_ON_APB - If peripheral is in the APB bus then read the
+ * bus to flush the write operation in apb bus. This flag indicates
+ * that this peripheral is in apb bus.
+ */
+struct tegra_clk_periph_gate {
+ u32 magic;
+ struct clk_hw hw;
+ void __iomem *clk_base;
+ u8 flags;
+ int clk_num;
+ int *enable_refcnt;
+ struct tegra_clk_periph_regs *regs;
+};
+
+#define to_clk_periph_gate(_hw) \
+ container_of(_hw, struct tegra_clk_periph_gate, hw)
+
+#define TEGRA_CLK_PERIPH_GATE_MAGIC 0x17760309
+
+#define TEGRA_PERIPH_NO_RESET BIT(0)
+#define TEGRA_PERIPH_MANUAL_RESET BIT(1)
+#define TEGRA_PERIPH_ON_APB BIT(2)
+
+void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert);
+extern const struct clk_ops tegra_clk_periph_gate_ops;
+struct clk *tegra_clk_register_periph_gate(const char *name,
+ const char *parent_name, u8 gate_flags, void __iomem *clk_base,
+ unsigned long flags, int clk_num,
+ struct tegra_clk_periph_regs *pregs, int *enable_refcnt);
+
+/**
+ * struct clk-periph - peripheral clock
+ *
+ * @magic: magic number to validate type
+ * @hw: handle between common and hardware-specific interfaces
+ * @mux: mux clock
+ * @divider: divider clock
+ * @gate: gate clock
+ * @mux_ops: mux clock ops
+ * @div_ops: divider clock ops
+ * @gate_ops: gate clock ops
+ */
+struct tegra_clk_periph {
+ u32 magic;
+ struct clk_hw hw;
+ struct clk_mux mux;
+ struct tegra_clk_frac_div divider;
+ struct tegra_clk_periph_gate gate;
+
+ const struct clk_ops *mux_ops;
+ const struct clk_ops *div_ops;
+ const struct clk_ops *gate_ops;
+};
+
+#define to_clk_periph(_hw) container_of(_hw, struct tegra_clk_periph, hw)
+
+#define TEGRA_CLK_PERIPH_MAGIC 0x18221223
+
+extern const struct clk_ops tegra_clk_periph_ops;
+struct clk *tegra_clk_register_periph(const char *name,
+ const char **parent_names, int num_parents,
+ struct tegra_clk_periph *periph, void __iomem *clk_base,
+ u32 offset);
+struct clk *tegra_clk_register_periph_nodiv(const char *name,
+ const char **parent_names, int num_parents,
+ struct tegra_clk_periph *periph, void __iomem *clk_base,
+ u32 offset);
+
+#define TEGRA_CLK_PERIPH(_mux_shift, _mux_width, _mux_flags, \
+ _div_shift, _div_width, _div_frac_width, \
+ _div_flags, _clk_num, _enb_refcnt, _regs, \
+ _gate_flags) \
+ { \
+ .mux = { \
+ .flags = _mux_flags, \
+ .shift = _mux_shift, \
+ .width = _mux_width, \
+ }, \
+ .divider = { \
+ .flags = _div_flags, \
+ .shift = _div_shift, \
+ .width = _div_width, \
+ .frac_width = _div_frac_width, \
+ }, \
+ .gate = { \
+ .flags = _gate_flags, \
+ .clk_num = _clk_num, \
+ .enable_refcnt = _enb_refcnt, \
+ .regs = _regs, \
+ }, \
+ .mux_ops = &clk_mux_ops, \
+ .div_ops = &tegra_clk_frac_div_ops, \
+ .gate_ops = &tegra_clk_periph_gate_ops, \
+ }
+
+struct tegra_periph_init_data {
+ const char *name;
+ int clk_id;
+ const char **parent_names;
+ int num_parents;
+ struct tegra_clk_periph periph;
+ u32 offset;
+ const char *con_id;
+ const char *dev_id;
+};
+
+#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset, \
+ _mux_shift, _mux_width, _mux_flags, _div_shift, \
+ _div_width, _div_frac_width, _div_flags, _regs, \
+ _clk_num, _enb_refcnt, _gate_flags, _clk_id) \
+ { \
+ .name = _name, \
+ .clk_id = _clk_id, \
+ .parent_names = _parent_names, \
+ .num_parents = ARRAY_SIZE(_parent_names), \
+ .periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_width, \
+ _mux_flags, _div_shift, \
+ _div_width, _div_frac_width, \
+ _div_flags, _clk_num, \
+ _enb_refcnt, _regs, \
+ _gate_flags), \
+ .offset = _offset, \
+ .con_id = _con_id, \
+ .dev_id = _dev_id, \
+ }
+
+/**
+ * struct clk_super_mux - super clock
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @reg: register controlling multiplexer
+ * @width: width of the multiplexer bit field
+ * @flags: hardware-specific flags
+ * @div2_index: bit controlling divide-by-2
+ * @pllx_index: PLLX index in the parent list
+ * @lock: register lock
+ *
+ * Flags:
+ * TEGRA_DIVIDER_2 - LP cluster has additional divider. This flag indicates
+ * that this is LP cluster clock.
+ */
+struct tegra_clk_super_mux {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 width;
+ u8 flags;
+ u8 div2_index;
+ u8 pllx_index;
+ spinlock_t *lock;
+};
+
+#define to_clk_super_mux(_hw) container_of(_hw, struct tegra_clk_super_mux, hw)
+
+#define TEGRA_DIVIDER_2 BIT(0)
+
+extern const struct clk_ops tegra_clk_super_ops;
+struct clk *tegra_clk_register_super_mux(const char *name,
+ const char **parent_names, u8 num_parents,
+ unsigned long flags, void __iomem *reg, u8 clk_super_flags,
+ u8 width, u8 pllx_index, u8 div2_index, spinlock_t *lock);
+
+/**
+ * struct clk_init_tabel - clock initialization table
+ * @clk_id: clock id as mentioned in device tree bindings
+ * @parent_id: parent clock id as mentioned in device tree bindings
+ * @rate: rate to set
+ * @state: enable/disable
+ */
+struct tegra_clk_init_table {
+ unsigned int clk_id;
+ unsigned int parent_id;
+ unsigned long rate;
+ int state;
+};
+
+/**
+ * struct clk_duplicate - duplicate clocks
+ * @clk_id: clock id as mentioned in device tree bindings
+ * @lookup: duplicate lookup entry for the clock
+ */
+struct tegra_clk_duplicate {
+ int clk_id;
+ struct clk_lookup lookup;
+};
+
+#define TEGRA_CLK_DUPLICATE(_clk_id, _dev, _con) \
+ { \
+ .clk_id = _clk_id, \
+ .lookup = { \
+ .dev_id = _dev, \
+ .con_id = _con, \
+ }, \
+ }
+
+void tegra_init_from_table(struct tegra_clk_init_table *tbl,
+ struct clk *clks[], int clk_max);
+
+void tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
+ struct clk *clks[], int clk_max);
+
+#endif /* TEGRA_CLK_H */
--
1.7.10.4
^ permalink raw reply related
* [PATCH V5 2/3] clk: tegra: add clock support for Tegra20
From: Stephen Warren @ 2013-01-16 20:52 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1358369575-7325-1-git-send-email-swarren@wwwdotorg.org>
From: Prashant Gaikwad <pgaikwad@nvidia.com>
Add Tegra20 clock support based on common clock framework.
Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
[swarren: s/1GHz/100MHz/ in call to tegra_clk_plle() to fix PCIe,
implemented KBC clock, ensure all OF lookups return valid cookies i.e.
an explicit error pointer or valid pointer not NULL, adapt to renames
in earlier patches, fixed some checkpatch issues.]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
drivers/clk/tegra/Makefile | 2 +
drivers/clk/tegra/clk-tegra20.c | 1273 +++++++++++++++++++++++++++++++++++++++
drivers/clk/tegra/clk.h | 6 +
3 files changed, 1281 insertions(+)
create mode 100644 drivers/clk/tegra/clk-tegra20.c
diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile
index 68bd353..00484fd4 100644
--- a/drivers/clk/tegra/Makefile
+++ b/drivers/clk/tegra/Makefile
@@ -6,3 +6,5 @@ obj-y += clk-periph-gate.o
obj-y += clk-pll.o
obj-y += clk-pll-out.o
obj-y += clk-super.o
+
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clk-tegra20.o
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
new file mode 100644
index 0000000..4ae8287
--- /dev/null
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -0,0 +1,1273 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/tegra.h>
+
+#include "clk.h"
+
+#define RST_DEVICES_L 0x004
+#define RST_DEVICES_H 0x008
+#define RST_DEVICES_U 0x00c
+#define RST_DEVICES_SET_L 0x300
+#define RST_DEVICES_CLR_L 0x304
+#define RST_DEVICES_SET_H 0x308
+#define RST_DEVICES_CLR_H 0x30c
+#define RST_DEVICES_SET_U 0x310
+#define RST_DEVICES_CLR_U 0x314
+#define RST_DEVICES_NUM 3
+
+#define CLK_OUT_ENB_L 0x010
+#define CLK_OUT_ENB_H 0x014
+#define CLK_OUT_ENB_U 0x018
+#define CLK_OUT_ENB_SET_L 0x320
+#define CLK_OUT_ENB_CLR_L 0x324
+#define CLK_OUT_ENB_SET_H 0x328
+#define CLK_OUT_ENB_CLR_H 0x32c
+#define CLK_OUT_ENB_SET_U 0x330
+#define CLK_OUT_ENB_CLR_U 0x334
+#define CLK_OUT_ENB_NUM 3
+
+#define OSC_CTRL 0x50
+#define OSC_CTRL_OSC_FREQ_MASK (3<<30)
+#define OSC_CTRL_OSC_FREQ_13MHZ (0<<30)
+#define OSC_CTRL_OSC_FREQ_19_2MHZ (1<<30)
+#define OSC_CTRL_OSC_FREQ_12MHZ (2<<30)
+#define OSC_CTRL_OSC_FREQ_26MHZ (3<<30)
+#define OSC_CTRL_MASK (0x3f2 | OSC_CTRL_OSC_FREQ_MASK)
+
+#define OSC_CTRL_PLL_REF_DIV_MASK (3<<28)
+#define OSC_CTRL_PLL_REF_DIV_1 (0<<28)
+#define OSC_CTRL_PLL_REF_DIV_2 (1<<28)
+#define OSC_CTRL_PLL_REF_DIV_4 (2<<28)
+
+#define OSC_FREQ_DET 0x58
+#define OSC_FREQ_DET_TRIG (1<<31)
+
+#define OSC_FREQ_DET_STATUS 0x5c
+#define OSC_FREQ_DET_BUSY (1<<31)
+#define OSC_FREQ_DET_CNT_MASK 0xFFFF
+
+#define PLLS_BASE 0xf0
+#define PLLS_MISC 0xf4
+#define PLLC_BASE 0x80
+#define PLLC_MISC 0x8c
+#define PLLM_BASE 0x90
+#define PLLM_MISC 0x9c
+#define PLLP_BASE 0xa0
+#define PLLP_MISC 0xac
+#define PLLA_BASE 0xb0
+#define PLLA_MISC 0xbc
+#define PLLU_BASE 0xc0
+#define PLLU_MISC 0xcc
+#define PLLD_BASE 0xd0
+#define PLLD_MISC 0xdc
+#define PLLX_BASE 0xe0
+#define PLLX_MISC 0xe4
+#define PLLE_BASE 0xe8
+#define PLLE_MISC 0xec
+
+#define PLL_BASE_LOCK 27
+#define PLLE_MISC_LOCK 11
+
+#define PLL_MISC_LOCK_ENABLE 18
+#define PLLDU_MISC_LOCK_ENABLE 22
+#define PLLE_MISC_LOCK_ENABLE 9
+
+#define PLLC_OUT 0x84
+#define PLLM_OUT 0x94
+#define PLLP_OUTA 0xa4
+#define PLLP_OUTB 0xa8
+#define PLLA_OUT 0xb4
+
+#define CCLK_BURST_POLICY 0x20
+#define SUPER_CCLK_DIVIDER 0x24
+#define SCLK_BURST_POLICY 0x28
+#define SUPER_SCLK_DIVIDER 0x2c
+#define CLK_SYSTEM_RATE 0x30
+
+#define CLK_SOURCE_I2S1 0x100
+#define CLK_SOURCE_I2S2 0x104
+#define CLK_SOURCE_SPDIF_OUT 0x108
+#define CLK_SOURCE_SPDIF_IN 0x10c
+#define CLK_SOURCE_PWM 0x110
+#define CLK_SOURCE_SPI 0x114
+#define CLK_SOURCE_SBC1 0x134
+#define CLK_SOURCE_SBC2 0x118
+#define CLK_SOURCE_SBC3 0x11c
+#define CLK_SOURCE_SBC4 0x1b4
+#define CLK_SOURCE_XIO 0x120
+#define CLK_SOURCE_TWC 0x12c
+#define CLK_SOURCE_IDE 0x144
+#define CLK_SOURCE_NDFLASH 0x160
+#define CLK_SOURCE_VFIR 0x168
+#define CLK_SOURCE_SDMMC1 0x150
+#define CLK_SOURCE_SDMMC2 0x154
+#define CLK_SOURCE_SDMMC3 0x1bc
+#define CLK_SOURCE_SDMMC4 0x164
+#define CLK_SOURCE_CVE 0x140
+#define CLK_SOURCE_TVO 0x188
+#define CLK_SOURCE_TVDAC 0x194
+#define CLK_SOURCE_HDMI 0x18c
+#define CLK_SOURCE_DISP1 0x138
+#define CLK_SOURCE_DISP2 0x13c
+#define CLK_SOURCE_CSITE 0x1d4
+#define CLK_SOURCE_LA 0x1f8
+#define CLK_SOURCE_OWR 0x1cc
+#define CLK_SOURCE_NOR 0x1d0
+#define CLK_SOURCE_MIPI 0x174
+#define CLK_SOURCE_I2C1 0x124
+#define CLK_SOURCE_I2C2 0x198
+#define CLK_SOURCE_I2C3 0x1b8
+#define CLK_SOURCE_DVC 0x128
+#define CLK_SOURCE_UARTA 0x178
+#define CLK_SOURCE_UARTB 0x17c
+#define CLK_SOURCE_UARTC 0x1a0
+#define CLK_SOURCE_UARTD 0x1c0
+#define CLK_SOURCE_UARTE 0x1c4
+#define CLK_SOURCE_3D 0x158
+#define CLK_SOURCE_2D 0x15c
+#define CLK_SOURCE_MPE 0x170
+#define CLK_SOURCE_EPP 0x16c
+#define CLK_SOURCE_HOST1X 0x180
+#define CLK_SOURCE_VDE 0x1c8
+#define CLK_SOURCE_VI 0x148
+#define CLK_SOURCE_VI_SENSOR 0x1a8
+#define CLK_SOURCE_EMC 0x19c
+
+#define AUDIO_SYNC_CLK 0x38
+
+#define PMC_CTRL 0x0
+#define PMC_CTRL_BLINK_ENB 7
+#define PMC_DPD_PADS_ORIDE 0x1c
+#define PMC_DPD_PADS_ORIDE_BLINK_ENB 20
+#define PMC_BLINK_TIMER 0x40
+
+/* Tegra CPU clock and reset control regs */
+#define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX 0x4c
+#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET 0x340
+#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR 0x344
+
+#define CPU_CLOCK(cpu) (0x1 << (8 + cpu))
+#define CPU_RESET(cpu) (0x1111ul << (cpu))
+
+static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32];
+
+static void __iomem *clk_base;
+static void __iomem *pmc_base;
+
+static DEFINE_SPINLOCK(pll_div_lock);
+
+#define TEGRA_INIT_DATA_MUX(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
+ 30, 2, 0, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP, \
+ _regs, _clk_num, periph_clk_enb_refcnt, \
+ _gate_flags, _clk_id)
+
+#define TEGRA_INIT_DATA_INT(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
+ 30, 2, 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs, \
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id)
+
+#define TEGRA_INIT_DATA_DIV16(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
+ 30, 2, 0, 0, 16, 0, TEGRA_DIVIDER_ROUND_UP, _regs, \
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id)
+
+#define TEGRA_INIT_DATA_NODIV(_name, _con_id, _dev_id, _parents, _offset, \
+ _mux_shift, _mux_width, _clk_num, _regs, \
+ _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
+ _mux_shift, _mux_width, 0, 0, 0, 0, 0, _regs, \
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id)
+
+/* IDs assigned here must be in sync with DT bindings definition
+ * for Tegra20 clocks .
+ */
+enum tegra20_clk {
+ cpu, ac97 = 3, rtc, timer, uarta, gpio = 8, sdmmc2, i2s1 = 11, i2c1,
+ ndflash, sdmmc1, sdmmc4, twc, pwm, i2s2, epp, gr2d = 21, usbd, isp,
+ gr3d, ide, disp2, disp1, host1x, vcp, cache2 = 31, mem, ahbdma, apbdma,
+ kbc = 36, stat_mon, pmc, fuse, kfuse, sbc1, nor, spi, sbc2, xio, sbc3,
+ dvc, dsi, mipi = 50, hdmi, csi, tvdac, i2c2, uartc, emc = 57, usb2,
+ usb3, mpe, vde, bsea, bsev, speedo, uartd, uarte, i2c3, sbc4, sdmmc3,
+ pex, owr, afi, csite, pcie_xclk, avpucq = 75, la, irama = 84, iramb,
+ iramc, iramd, cram2, audio_2x, clk_d, csus = 92, cdev1, cdev2,
+ uartb = 96, vfir, spdif_in, spdif_out, vi, vi_sensor, tvo, cve,
+ osc, clk_32k, clk_m, sclk, cclk, hclk, pclk, blink, pll_a, pll_a_out0,
+ pll_c, pll_c_out1, pll_d, pll_d_out0, pll_e, pll_m, pll_m_out1,
+ pll_p, pll_p_out1, pll_p_out2, pll_p_out3, pll_p_out4, pll_u,
+ pll_x, audio, pll_ref, twd, clk_max,
+};
+
+static struct clk *clks[clk_max];
+static struct clk_onecell_data clk_data;
+
+static struct tegra_clk_pll_freq_table pll_c_freq_table[] = {
+ { 12000000, 600000000, 600, 12, 1, 8 },
+ { 13000000, 600000000, 600, 13, 1, 8 },
+ { 19200000, 600000000, 500, 16, 1, 6 },
+ { 26000000, 600000000, 600, 26, 1, 8 },
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_m_freq_table[] = {
+ { 12000000, 666000000, 666, 12, 1, 8},
+ { 13000000, 666000000, 666, 13, 1, 8},
+ { 19200000, 666000000, 555, 16, 1, 8},
+ { 26000000, 666000000, 666, 26, 1, 8},
+ { 12000000, 600000000, 600, 12, 1, 8},
+ { 13000000, 600000000, 600, 13, 1, 8},
+ { 19200000, 600000000, 375, 12, 1, 6},
+ { 26000000, 600000000, 600, 26, 1, 8},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_p_freq_table[] = {
+ { 12000000, 216000000, 432, 12, 2, 8},
+ { 13000000, 216000000, 432, 13, 2, 8},
+ { 19200000, 216000000, 90, 4, 2, 1},
+ { 26000000, 216000000, 432, 26, 2, 8},
+ { 12000000, 432000000, 432, 12, 1, 8},
+ { 13000000, 432000000, 432, 13, 1, 8},
+ { 19200000, 432000000, 90, 4, 1, 1},
+ { 26000000, 432000000, 432, 26, 1, 8},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_a_freq_table[] = {
+ { 28800000, 56448000, 49, 25, 1, 1},
+ { 28800000, 73728000, 64, 25, 1, 1},
+ { 28800000, 24000000, 5, 6, 1, 1},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_d_freq_table[] = {
+ { 12000000, 216000000, 216, 12, 1, 4},
+ { 13000000, 216000000, 216, 13, 1, 4},
+ { 19200000, 216000000, 135, 12, 1, 3},
+ { 26000000, 216000000, 216, 26, 1, 4},
+
+ { 12000000, 594000000, 594, 12, 1, 8},
+ { 13000000, 594000000, 594, 13, 1, 8},
+ { 19200000, 594000000, 495, 16, 1, 8},
+ { 26000000, 594000000, 594, 26, 1, 8},
+
+ { 12000000, 1000000000, 1000, 12, 1, 12},
+ { 13000000, 1000000000, 1000, 13, 1, 12},
+ { 19200000, 1000000000, 625, 12, 1, 8},
+ { 26000000, 1000000000, 1000, 26, 1, 12},
+
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_u_freq_table[] = {
+ { 12000000, 480000000, 960, 12, 2, 0},
+ { 13000000, 480000000, 960, 13, 2, 0},
+ { 19200000, 480000000, 200, 4, 2, 0},
+ { 26000000, 480000000, 960, 26, 2, 0},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_x_freq_table[] = {
+ /* 1 GHz */
+ { 12000000, 1000000000, 1000, 12, 1, 12},
+ { 13000000, 1000000000, 1000, 13, 1, 12},
+ { 19200000, 1000000000, 625, 12, 1, 8},
+ { 26000000, 1000000000, 1000, 26, 1, 12},
+
+ /* 912 MHz */
+ { 12000000, 912000000, 912, 12, 1, 12},
+ { 13000000, 912000000, 912, 13, 1, 12},
+ { 19200000, 912000000, 760, 16, 1, 8},
+ { 26000000, 912000000, 912, 26, 1, 12},
+
+ /* 816 MHz */
+ { 12000000, 816000000, 816, 12, 1, 12},
+ { 13000000, 816000000, 816, 13, 1, 12},
+ { 19200000, 816000000, 680, 16, 1, 8},
+ { 26000000, 816000000, 816, 26, 1, 12},
+
+ /* 760 MHz */
+ { 12000000, 760000000, 760, 12, 1, 12},
+ { 13000000, 760000000, 760, 13, 1, 12},
+ { 19200000, 760000000, 950, 24, 1, 8},
+ { 26000000, 760000000, 760, 26, 1, 12},
+
+ /* 750 MHz */
+ { 12000000, 750000000, 750, 12, 1, 12},
+ { 13000000, 750000000, 750, 13, 1, 12},
+ { 19200000, 750000000, 625, 16, 1, 8},
+ { 26000000, 750000000, 750, 26, 1, 12},
+
+ /* 608 MHz */
+ { 12000000, 608000000, 608, 12, 1, 12},
+ { 13000000, 608000000, 608, 13, 1, 12},
+ { 19200000, 608000000, 380, 12, 1, 8},
+ { 26000000, 608000000, 608, 26, 1, 12},
+
+ /* 456 MHz */
+ { 12000000, 456000000, 456, 12, 1, 12},
+ { 13000000, 456000000, 456, 13, 1, 12},
+ { 19200000, 456000000, 380, 16, 1, 8},
+ { 26000000, 456000000, 456, 26, 1, 12},
+
+ /* 312 MHz */
+ { 12000000, 312000000, 312, 12, 1, 12},
+ { 13000000, 312000000, 312, 13, 1, 12},
+ { 19200000, 312000000, 260, 16, 1, 8},
+ { 26000000, 312000000, 312, 26, 1, 12},
+
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_e_freq_table[] = {
+ { 12000000, 100000000, 200, 24, 1, 0 },
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+/* PLL parameters */
+static struct tegra_clk_pll_params pll_c_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1400000000,
+ .base_reg = PLLC_BASE,
+ .misc_reg = PLLC_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_params pll_m_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1200000000,
+ .base_reg = PLLM_BASE,
+ .misc_reg = PLLM_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_params pll_p_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1400000000,
+ .base_reg = PLLP_BASE,
+ .misc_reg = PLLP_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_params pll_a_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1400000000,
+ .base_reg = PLLA_BASE,
+ .misc_reg = PLLA_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_params pll_d_params = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 40000000,
+ .vco_max = 1000000000,
+ .base_reg = PLLD_BASE,
+ .misc_reg = PLLD_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
+ .lock_delay = 1000,
+};
+
+static struct tegra_clk_pll_params pll_u_params = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 48000000,
+ .vco_max = 960000000,
+ .base_reg = PLLU_BASE,
+ .misc_reg = PLLU_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
+ .lock_delay = 1000,
+};
+
+static struct tegra_clk_pll_params pll_x_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1200000000,
+ .base_reg = PLLX_BASE,
+ .misc_reg = PLLX_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_params pll_e_params = {
+ .input_min = 12000000,
+ .input_max = 12000000,
+ .cf_min = 0,
+ .cf_max = 0,
+ .vco_min = 0,
+ .vco_max = 0,
+ .base_reg = PLLE_BASE,
+ .misc_reg = PLLE_MISC,
+ .lock_bit_idx = PLLE_MISC_LOCK,
+ .lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE,
+ .lock_delay = 0,
+};
+
+/* Peripheral clock registers */
+static struct tegra_clk_periph_regs periph_l_regs = {
+ .enb_reg = CLK_OUT_ENB_L,
+ .enb_set_reg = CLK_OUT_ENB_SET_L,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_L,
+ .rst_reg = RST_DEVICES_L,
+ .rst_set_reg = RST_DEVICES_SET_L,
+ .rst_clr_reg = RST_DEVICES_CLR_L,
+};
+
+static struct tegra_clk_periph_regs periph_h_regs = {
+ .enb_reg = CLK_OUT_ENB_H,
+ .enb_set_reg = CLK_OUT_ENB_SET_H,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_H,
+ .rst_reg = RST_DEVICES_H,
+ .rst_set_reg = RST_DEVICES_SET_H,
+ .rst_clr_reg = RST_DEVICES_CLR_H,
+};
+
+static struct tegra_clk_periph_regs periph_u_regs = {
+ .enb_reg = CLK_OUT_ENB_U,
+ .enb_set_reg = CLK_OUT_ENB_SET_U,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_U,
+ .rst_reg = RST_DEVICES_U,
+ .rst_set_reg = RST_DEVICES_SET_U,
+ .rst_clr_reg = RST_DEVICES_CLR_U,
+};
+
+static unsigned long tegra20_clk_measure_input_freq(void)
+{
+ u32 osc_ctrl = readl_relaxed(clk_base + OSC_CTRL);
+ u32 auto_clk_control = osc_ctrl & OSC_CTRL_OSC_FREQ_MASK;
+ u32 pll_ref_div = osc_ctrl & OSC_CTRL_PLL_REF_DIV_MASK;
+ unsigned long input_freq;
+
+ switch (auto_clk_control) {
+ case OSC_CTRL_OSC_FREQ_12MHZ:
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+ input_freq = 12000000;
+ break;
+ case OSC_CTRL_OSC_FREQ_13MHZ:
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+ input_freq = 13000000;
+ break;
+ case OSC_CTRL_OSC_FREQ_19_2MHZ:
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+ input_freq = 19200000;
+ break;
+ case OSC_CTRL_OSC_FREQ_26MHZ:
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+ input_freq = 26000000;
+ break;
+ default:
+ pr_err("Unexpected clock autodetect value %d",
+ auto_clk_control);
+ BUG();
+ return 0;
+ }
+
+ return input_freq;
+}
+
+static unsigned int tegra20_get_pll_ref_div(void)
+{
+ u32 pll_ref_div = readl_relaxed(clk_base + OSC_CTRL) &
+ OSC_CTRL_PLL_REF_DIV_MASK;
+
+ switch (pll_ref_div) {
+ case OSC_CTRL_PLL_REF_DIV_1:
+ return 1;
+ case OSC_CTRL_PLL_REF_DIV_2:
+ return 2;
+ case OSC_CTRL_PLL_REF_DIV_4:
+ return 4;
+ default:
+ pr_err("Invalied pll ref divider %d\n", pll_ref_div);
+ BUG();
+ }
+ return 0;
+}
+
+static void tegra20_pll_init(void)
+{
+ struct clk *clk;
+
+ /* PLLC */
+ clk = tegra_clk_register_pll("pll_c", "pll_ref", clk_base, NULL, 0,
+ 0, &pll_c_params, TEGRA_PLL_HAS_CPCON,
+ pll_c_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_c", NULL);
+ clks[pll_c] = clk;
+
+ /* PLLC_OUT1 */
+ clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c",
+ clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_c_out1", "pll_c_out1_div",
+ clk_base + PLLC_OUT, 1, 0, CLK_SET_RATE_PARENT,
+ 0, NULL);
+ clk_register_clkdev(clk, "pll_c_out1", NULL);
+ clks[pll_c_out1] = clk;
+
+ /* PLLP */
+ clk = tegra_clk_register_pll("pll_p", "pll_ref", clk_base, NULL, 0,
+ 216000000, &pll_p_params, TEGRA_PLL_FIXED |
+ TEGRA_PLL_HAS_CPCON, pll_p_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_p", NULL);
+ clks[pll_p] = clk;
+
+ /* PLLP_OUT1 */
+ clk = tegra_clk_register_divider("pll_p_out1_div", "pll_p",
+ clk_base + PLLP_OUTA, 0,
+ TEGRA_DIVIDER_FIXED | TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out1", "pll_p_out1_div",
+ clk_base + PLLP_OUTA, 1, 0,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out1", NULL);
+ clks[pll_p_out1] = clk;
+
+ /* PLLP_OUT2 */
+ clk = tegra_clk_register_divider("pll_p_out2_div", "pll_p",
+ clk_base + PLLP_OUTA, 0,
+ TEGRA_DIVIDER_FIXED | TEGRA_DIVIDER_ROUND_UP,
+ 24, 8, 1, &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out2", "pll_p_out2_div",
+ clk_base + PLLP_OUTA, 17, 16,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out2", NULL);
+ clks[pll_p_out2] = clk;
+
+ /* PLLP_OUT3 */
+ clk = tegra_clk_register_divider("pll_p_out3_div", "pll_p",
+ clk_base + PLLP_OUTB, 0,
+ TEGRA_DIVIDER_FIXED | TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out3", "pll_p_out3_div",
+ clk_base + PLLP_OUTB, 1, 0,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out3", NULL);
+ clks[pll_p_out3] = clk;
+
+ /* PLLP_OUT4 */
+ clk = tegra_clk_register_divider("pll_p_out4_div", "pll_p",
+ clk_base + PLLP_OUTB, 0,
+ TEGRA_DIVIDER_FIXED | TEGRA_DIVIDER_ROUND_UP,
+ 24, 8, 1, &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out4", "pll_p_out4_div",
+ clk_base + PLLP_OUTB, 17, 16,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out4", NULL);
+ clks[pll_p_out4] = clk;
+
+ /* PLLM */
+ clk = tegra_clk_register_pll("pll_m", "pll_ref", clk_base, NULL,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE, 0,
+ &pll_m_params, TEGRA_PLL_HAS_CPCON,
+ pll_m_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_m", NULL);
+ clks[pll_m] = clk;
+
+ /* PLLM_OUT1 */
+ clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m",
+ clk_base + PLLM_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_m_out1", "pll_m_out1_div",
+ clk_base + PLLM_OUT, 1, 0, CLK_IGNORE_UNUSED |
+ CLK_SET_RATE_PARENT, 0, NULL);
+ clk_register_clkdev(clk, "pll_m_out1", NULL);
+ clks[pll_m_out1] = clk;
+
+ /* PLLX */
+ clk = tegra_clk_register_pll("pll_x", "pll_ref", clk_base, NULL, 0,
+ 0, &pll_x_params, TEGRA_PLL_HAS_CPCON,
+ pll_x_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_x", NULL);
+ clks[pll_x] = clk;
+
+ /* PLLU */
+ clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, NULL, 0,
+ 0, &pll_u_params, TEGRA_PLLU | TEGRA_PLL_HAS_CPCON,
+ pll_u_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_u", NULL);
+ clks[pll_u] = clk;
+
+ /* PLLD */
+ clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, NULL, 0,
+ 0, &pll_d_params, TEGRA_PLL_HAS_CPCON,
+ pll_d_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_d", NULL);
+ clks[pll_d] = clk;
+
+ /* PLLD_OUT0 */
+ clk = clk_register_fixed_factor(NULL, "pll_d_out0", "pll_d",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll_d_out0", NULL);
+ clks[pll_d_out0] = clk;
+
+ /* PLLA */
+ clk = tegra_clk_register_pll("pll_a", "pll_p_out1", clk_base, NULL, 0,
+ 0, &pll_a_params, TEGRA_PLL_HAS_CPCON,
+ pll_a_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_a", NULL);
+ clks[pll_a] = clk;
+
+ /* PLLA_OUT0 */
+ clk = tegra_clk_register_divider("pll_a_out0_div", "pll_a",
+ clk_base + PLLA_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_a_out0", "pll_a_out0_div",
+ clk_base + PLLA_OUT, 1, 0, CLK_IGNORE_UNUSED |
+ CLK_SET_RATE_PARENT, 0, NULL);
+ clk_register_clkdev(clk, "pll_a_out0", NULL);
+ clks[pll_a_out0] = clk;
+
+ /* PLLE */
+ clk = tegra_clk_register_plle("pll_e", "pll_ref", clk_base, NULL,
+ 0, 100000000, &pll_e_params,
+ 0, pll_e_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_e", NULL);
+ clks[pll_e] = clk;
+}
+
+static const char *cclk_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
+ "pll_p_cclk", "pll_p_out4_cclk",
+ "pll_p_out3_cclk", "clk_d", "pll_x" };
+static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4",
+ "pll_p_out3", "pll_p_out2", "clk_d",
+ "clk_32k", "pll_m_out1" };
+
+static void tegra20_super_clk_init(void)
+{
+ struct clk *clk;
+
+ /*
+ * DIV_U71 dividers for CCLK, these dividers are used only
+ * if parent clock is fixed rate.
+ */
+
+ /*
+ * Clock input to cclk divided from pll_p using
+ * U71 divider of cclk.
+ */
+ clk = tegra_clk_register_divider("pll_p_cclk", "pll_p",
+ clk_base + SUPER_CCLK_DIVIDER, 0,
+ TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
+ clk_register_clkdev(clk, "pll_p_cclk", NULL);
+
+ /*
+ * Clock input to cclk divided from pll_p_out3 using
+ * U71 divider of cclk.
+ */
+ clk = tegra_clk_register_divider("pll_p_out3_cclk", "pll_p_out3",
+ clk_base + SUPER_CCLK_DIVIDER, 0,
+ TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
+ clk_register_clkdev(clk, "pll_p_out3_cclk", NULL);
+
+ /*
+ * Clock input to cclk divided from pll_p_out4 using
+ * U71 divider of cclk.
+ */
+ clk = tegra_clk_register_divider("pll_p_out4_cclk", "pll_p_out4",
+ clk_base + SUPER_CCLK_DIVIDER, 0,
+ TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
+ clk_register_clkdev(clk, "pll_p_out4_cclk", NULL);
+
+ /* CCLK */
+ clk = tegra_clk_register_super_mux("cclk", cclk_parents,
+ ARRAY_SIZE(cclk_parents), CLK_SET_RATE_PARENT,
+ clk_base + CCLK_BURST_POLICY, 0, 4, 0, 0, NULL);
+ clk_register_clkdev(clk, "cclk", NULL);
+ clks[cclk] = clk;
+
+ /* SCLK */
+ clk = tegra_clk_register_super_mux("sclk", sclk_parents,
+ ARRAY_SIZE(sclk_parents), CLK_SET_RATE_PARENT,
+ clk_base + SCLK_BURST_POLICY, 0, 4, 0, 0, NULL);
+ clk_register_clkdev(clk, "sclk", NULL);
+ clks[sclk] = clk;
+
+ /* HCLK */
+ clk = clk_register_divider(NULL, "hclk_div", "sclk", 0,
+ clk_base + CLK_SYSTEM_RATE, 4, 2, 0, NULL);
+ clk = clk_register_gate(NULL, "hclk", "hclk_div", CLK_SET_RATE_PARENT,
+ clk_base + CLK_SYSTEM_RATE, 7,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "hclk", NULL);
+ clks[hclk] = clk;
+
+ /* PCLK */
+ clk = clk_register_divider(NULL, "pclk_div", "hclk", 0,
+ clk_base + CLK_SYSTEM_RATE, 0, 2, 0, NULL);
+ clk = clk_register_gate(NULL, "pclk", "pclk_div", CLK_SET_RATE_PARENT,
+ clk_base + CLK_SYSTEM_RATE, 3,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "pclk", NULL);
+ clks[pclk] = clk;
+
+ /* twd */
+ clk = clk_register_fixed_factor(NULL, "twd", "cclk", 0, 1, 4);
+ clk_register_clkdev(clk, "twd", NULL);
+ clks[twd] = clk;
+}
+
+static const char *audio_parents[] = {"spdif_in", "i2s1", "i2s2", "unused",
+ "pll_a_out0", "unused", "unused",
+ "unused"};
+
+static void __init tegra20_audio_clk_init(void)
+{
+ struct clk *clk;
+
+ /* audio */
+ clk = clk_register_mux(NULL, "audio_mux", audio_parents,
+ ARRAY_SIZE(audio_parents), 0,
+ clk_base + AUDIO_SYNC_CLK, 0, 3, 0, NULL);
+ clk = clk_register_gate(NULL, "audio", "audio_mux", 0,
+ clk_base + AUDIO_SYNC_CLK, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio", NULL);
+ clks[audio] = clk;
+
+ /* audio_2x */
+ clk = clk_register_fixed_factor(NULL, "audio_doubler", "audio",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_periph_gate("audio_2x", "audio_doubler",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 89, &periph_u_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio_2x", NULL);
+ clks[audio_2x] = clk;
+
+}
+
+static const char *i2s1_parents[] = {"pll_a_out0", "audio_2x", "pll_p",
+ "clk_m"};
+static const char *i2s2_parents[] = {"pll_a_out0", "audio_2x", "pll_p",
+ "clk_m"};
+static const char *spdif_out_parents[] = {"pll_a_out0", "audio_2x", "pll_p",
+ "clk_m"};
+static const char *spdif_in_parents[] = {"pll_p", "pll_c", "pll_m"};
+static const char *pwm_parents[] = {"pll_p", "pll_c", "audio", "clk_m",
+ "clk_32k"};
+static const char *mux_pllpcm_clkm[] = {"pll_p", "pll_c", "pll_m", "clk_m"};
+static const char *mux_pllmcpa[] = {"pll_m", "pll_c", "pll_c", "pll_a"};
+static const char *mux_pllpdc_clkm[] = {"pll_p", "pll_d_out0", "pll_c",
+ "clk_m"};
+static const char *mux_pllmcp_clkm[] = {"pll_m", "pll_c", "pll_p", "clk_m"};
+
+static struct tegra_periph_init_data tegra_periph_clk_list[] = {
+ TEGRA_INIT_DATA_MUX("i2s1", NULL, "tegra20-i2s.0", i2s1_parents, CLK_SOURCE_I2S1, 11, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s1),
+ TEGRA_INIT_DATA_MUX("i2s2", NULL, "tegra20-i2s.1", i2s2_parents, CLK_SOURCE_I2S2, 18, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s2),
+ TEGRA_INIT_DATA_MUX("spdif_out", "spdif_out", "tegra20-spdif", spdif_out_parents, CLK_SOURCE_SPDIF_OUT, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_out),
+ TEGRA_INIT_DATA_MUX("spdif_in", "spdif_in", "tegra20-spdif", spdif_in_parents, CLK_SOURCE_SPDIF_IN, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_in),
+ TEGRA_INIT_DATA_MUX("sbc1", NULL, "spi_tegra.0", mux_pllpcm_clkm, CLK_SOURCE_SBC1, 41, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc1),
+ TEGRA_INIT_DATA_MUX("sbc2", NULL, "spi_tegra.1", mux_pllpcm_clkm, CLK_SOURCE_SBC2, 44, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc2),
+ TEGRA_INIT_DATA_MUX("sbc3", NULL, "spi_tegra.2", mux_pllpcm_clkm, CLK_SOURCE_SBC3, 46, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc3),
+ TEGRA_INIT_DATA_MUX("sbc4", NULL, "spi_tegra.3", mux_pllpcm_clkm, CLK_SOURCE_SBC4, 68, &periph_u_regs, TEGRA_PERIPH_ON_APB, sbc4),
+ TEGRA_INIT_DATA_MUX("spi", NULL, "spi", mux_pllpcm_clkm, CLK_SOURCE_SPI, 43, &periph_h_regs, TEGRA_PERIPH_ON_APB, spi),
+ TEGRA_INIT_DATA_MUX("xio", NULL, "xio", mux_pllpcm_clkm, CLK_SOURCE_XIO, 45, &periph_h_regs, 0, xio),
+ TEGRA_INIT_DATA_MUX("twc", NULL, "twc", mux_pllpcm_clkm, CLK_SOURCE_TWC, 16, &periph_l_regs, TEGRA_PERIPH_ON_APB, twc),
+ TEGRA_INIT_DATA_MUX("ide", NULL, "ide", mux_pllpcm_clkm, CLK_SOURCE_XIO, 25, &periph_l_regs, 0, ide),
+ TEGRA_INIT_DATA_MUX("ndflash", NULL, "tegra_nand", mux_pllpcm_clkm, CLK_SOURCE_NDFLASH, 13, &periph_l_regs, 0, ndflash),
+ TEGRA_INIT_DATA_MUX("vfir", NULL, "vfir", mux_pllpcm_clkm, CLK_SOURCE_VFIR, 7, &periph_l_regs, TEGRA_PERIPH_ON_APB, vfir),
+ TEGRA_INIT_DATA_MUX("csite", NULL, "csite", mux_pllpcm_clkm, CLK_SOURCE_CSITE, 73, &periph_u_regs, 0, csite),
+ TEGRA_INIT_DATA_MUX("la", NULL, "la", mux_pllpcm_clkm, CLK_SOURCE_LA, 76, &periph_u_regs, 0, la),
+ TEGRA_INIT_DATA_MUX("owr", NULL, "tegra_w1", mux_pllpcm_clkm, CLK_SOURCE_OWR, 71, &periph_u_regs, TEGRA_PERIPH_ON_APB, owr),
+ TEGRA_INIT_DATA_MUX("mipi", NULL, "mipi", mux_pllpcm_clkm, CLK_SOURCE_MIPI, 50, &periph_h_regs, TEGRA_PERIPH_ON_APB, mipi),
+ TEGRA_INIT_DATA_MUX("vde", NULL, "vde", mux_pllpcm_clkm, CLK_SOURCE_VDE, 61, &periph_h_regs, 0, vde),
+ TEGRA_INIT_DATA_MUX("vi", "vi", "tegra_camera", mux_pllmcpa, CLK_SOURCE_VI, 20, &periph_l_regs, 0, vi),
+ TEGRA_INIT_DATA_MUX("epp", NULL, "epp", mux_pllmcpa, CLK_SOURCE_EPP, 19, &periph_l_regs, 0, epp),
+ TEGRA_INIT_DATA_MUX("mpe", NULL, "mpe", mux_pllmcpa, CLK_SOURCE_MPE, 60, &periph_h_regs, 0, mpe),
+ TEGRA_INIT_DATA_MUX("host1x", NULL, "host1x", mux_pllmcpa, CLK_SOURCE_HOST1X, 28, &periph_l_regs, 0, host1x),
+ TEGRA_INIT_DATA_MUX("3d", NULL, "3d", mux_pllmcpa, CLK_SOURCE_3D, 24, &periph_l_regs, TEGRA_PERIPH_MANUAL_RESET, gr3d),
+ TEGRA_INIT_DATA_MUX("2d", NULL, "2d", mux_pllmcpa, CLK_SOURCE_2D, 21, &periph_l_regs, 0, gr2d),
+ TEGRA_INIT_DATA_MUX("nor", NULL, "tegra-nor", mux_pllpcm_clkm, CLK_SOURCE_NOR, 42, &periph_h_regs, 0, nor),
+ TEGRA_INIT_DATA_MUX("sdmmc1", NULL, "sdhci-tegra.0", mux_pllpcm_clkm, CLK_SOURCE_SDMMC1, 14, &periph_l_regs, 0, sdmmc1),
+ TEGRA_INIT_DATA_MUX("sdmmc2", NULL, "sdhci-tegra.1", mux_pllpcm_clkm, CLK_SOURCE_SDMMC2, 9, &periph_l_regs, 0, sdmmc2),
+ TEGRA_INIT_DATA_MUX("sdmmc3", NULL, "sdhci-tegra.2", mux_pllpcm_clkm, CLK_SOURCE_SDMMC3, 69, &periph_u_regs, 0, sdmmc3),
+ TEGRA_INIT_DATA_MUX("sdmmc4", NULL, "sdhci-tegra.3", mux_pllpcm_clkm, CLK_SOURCE_SDMMC4, 15, &periph_l_regs, 0, sdmmc4),
+ TEGRA_INIT_DATA_MUX("cve", NULL, "cve", mux_pllpdc_clkm, CLK_SOURCE_CVE, 49, &periph_h_regs, 0, cve),
+ TEGRA_INIT_DATA_MUX("tvo", NULL, "tvo", mux_pllpdc_clkm, CLK_SOURCE_TVO, 49, &periph_h_regs, 0, tvo),
+ TEGRA_INIT_DATA_MUX("tvdac", NULL, "tvdac", mux_pllpdc_clkm, CLK_SOURCE_TVDAC, 53, &periph_h_regs, 0, tvdac),
+ TEGRA_INIT_DATA_MUX("vi_sensor", "vi_sensor", "tegra_camera", mux_pllmcpa, CLK_SOURCE_VI_SENSOR, 20, &periph_l_regs, TEGRA_PERIPH_NO_RESET, vi_sensor),
+ TEGRA_INIT_DATA_DIV16("i2c1", "div-clk", "tegra-i2c.0", mux_pllpcm_clkm, CLK_SOURCE_I2C1, 12, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2c1),
+ TEGRA_INIT_DATA_DIV16("i2c2", "div-clk", "tegra-i2c.1", mux_pllpcm_clkm, CLK_SOURCE_I2C2, 54, &periph_h_regs, TEGRA_PERIPH_ON_APB, i2c2),
+ TEGRA_INIT_DATA_DIV16("i2c3", "div-clk", "tegra-i2c.2", mux_pllpcm_clkm, CLK_SOURCE_I2C3, 67, &periph_u_regs, TEGRA_PERIPH_ON_APB, i2c3),
+ TEGRA_INIT_DATA_DIV16("dvc", "div-clk", "tegra-i2c.3", mux_pllpcm_clkm, CLK_SOURCE_DVC, 47, &periph_h_regs, TEGRA_PERIPH_ON_APB, dvc),
+ TEGRA_INIT_DATA_MUX("hdmi", NULL, "hdmi", mux_pllpdc_clkm, CLK_SOURCE_HDMI, 51, &periph_h_regs, 0, hdmi),
+ TEGRA_INIT_DATA("pwm", NULL, "tegra-pwm", pwm_parents, CLK_SOURCE_PWM, 28, 3, 0, 0, 8, 1, 0, &periph_l_regs, 17, periph_clk_enb_refcnt, TEGRA_PERIPH_ON_APB, pwm),
+};
+
+static struct tegra_periph_init_data tegra_periph_nodiv_clk_list[] = {
+ TEGRA_INIT_DATA_NODIV("uarta", NULL, "tegra_uart.0", mux_pllpcm_clkm, CLK_SOURCE_UARTA, 30, 2, 6, &periph_l_regs, TEGRA_PERIPH_ON_APB, uarta),
+ TEGRA_INIT_DATA_NODIV("uartb", NULL, "tegra_uart.1", mux_pllpcm_clkm, CLK_SOURCE_UARTB, 30, 2, 7, &periph_l_regs, TEGRA_PERIPH_ON_APB, uartb),
+ TEGRA_INIT_DATA_NODIV("uartc", NULL, "tegra_uart.2", mux_pllpcm_clkm, CLK_SOURCE_UARTC, 30, 2, 55, &periph_h_regs, TEGRA_PERIPH_ON_APB, uartc),
+ TEGRA_INIT_DATA_NODIV("uartd", NULL, "tegra_uart.3", mux_pllpcm_clkm, CLK_SOURCE_UARTD, 30, 2, 65, &periph_u_regs, TEGRA_PERIPH_ON_APB, uartd),
+ TEGRA_INIT_DATA_NODIV("uarte", NULL, "tegra_uart.4", mux_pllpcm_clkm, CLK_SOURCE_UARTE, 30, 2, 66, &periph_u_regs, TEGRA_PERIPH_ON_APB, uarte),
+ TEGRA_INIT_DATA_NODIV("disp1", NULL, "tegradc.0", mux_pllpdc_clkm, CLK_SOURCE_DISP1, 30, 2, 27, &periph_l_regs, 0, disp1),
+ TEGRA_INIT_DATA_NODIV("disp2", NULL, "tegradc.1", mux_pllpdc_clkm, CLK_SOURCE_DISP2, 30, 2, 26, &periph_l_regs, 0, disp2),
+};
+
+static void __init tegra20_periph_clk_init(void)
+{
+ struct tegra_periph_init_data *data;
+ struct clk *clk;
+ int i;
+
+ /* apbdma */
+ clk = tegra_clk_register_periph_gate("apbdma", "pclk", 0, clk_base,
+ 0, 34, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "tegra-apbdma");
+ clks[apbdma] = clk;
+
+ /* rtc */
+ clk = tegra_clk_register_periph_gate("rtc", "clk_32k",
+ TEGRA_PERIPH_NO_RESET,
+ clk_base, 0, 4, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "rtc-tegra");
+ clks[rtc] = clk;
+
+ /* timer */
+ clk = tegra_clk_register_periph_gate("timer", "clk_m", 0, clk_base,
+ 0, 5, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "timer");
+ clks[timer] = clk;
+
+ /* kbc */
+ clk = tegra_clk_register_periph_gate("kbc", "clk_32k",
+ TEGRA_PERIPH_NO_RESET | TEGRA_PERIPH_ON_APB,
+ clk_base, 0, 36, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "tegra-kbc");
+ clks[kbc] = clk;
+
+ /* csus */
+ clk = tegra_clk_register_periph_gate("csus", "clk_m",
+ TEGRA_PERIPH_NO_RESET,
+ clk_base, 0, 92, &periph_u_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "csus", "tengra_camera");
+ clks[csus] = clk;
+
+ /* vcp */
+ clk = tegra_clk_register_periph_gate("vcp", "clk_m", 0,
+ clk_base, 0, 29, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "vcp", "tegra-avp");
+ clks[vcp] = clk;
+
+ /* bsea */
+ clk = tegra_clk_register_periph_gate("bsea", "clk_m", 0,
+ clk_base, 0, 62, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "bsea", "tegra-avp");
+ clks[bsea] = clk;
+
+ /* bsev */
+ clk = tegra_clk_register_periph_gate("bsev", "clk_m", 0,
+ clk_base, 0, 63, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "bsev", "tegra-aes");
+ clks[bsev] = clk;
+
+ /* emc */
+ clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm,
+ ARRAY_SIZE(mux_pllmcp_clkm), 0,
+ clk_base + CLK_SOURCE_EMC,
+ 30, 2, 0, NULL);
+ clk = tegra_clk_register_periph_gate("emc", "emc_mux", 0, clk_base, 0,
+ 57, &periph_h_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "emc", NULL);
+ clks[emc] = clk;
+
+ /* usbd */
+ clk = tegra_clk_register_periph_gate("usbd", "clk_m", 0, clk_base, 0,
+ 22, &periph_l_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "fsl-tegra-udc");
+ clks[usbd] = clk;
+
+ /* usb2 */
+ clk = tegra_clk_register_periph_gate("usb2", "clk_m", 0, clk_base, 0,
+ 58, &periph_h_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "tegra-ehci.1");
+ clks[usb2] = clk;
+
+ /* usb3 */
+ clk = tegra_clk_register_periph_gate("usb3", "clk_m", 0, clk_base, 0,
+ 59, &periph_h_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "tegra-ehci.2");
+ clks[usb3] = clk;
+
+ /* dsi */
+ clk = tegra_clk_register_periph_gate("dsi", "pll_d", 0, clk_base, 0,
+ 48, &periph_h_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "dsi");
+ clks[dsi] = clk;
+
+ /* csi */
+ clk = tegra_clk_register_periph_gate("csi", "pll_p_out3", 0, clk_base,
+ 0, 52, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "csi", "tegra_camera");
+ clks[csi] = clk;
+
+ /* isp */
+ clk = tegra_clk_register_periph_gate("isp", "clk_m", 0, clk_base, 0, 23,
+ &periph_l_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "isp", "tegra_camera");
+ clks[isp] = clk;
+
+ /* pex */
+ clk = tegra_clk_register_periph_gate("pex", "clk_m", 0, clk_base, 0, 70,
+ &periph_u_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "pex", NULL);
+ clks[pex] = clk;
+
+ /* afi */
+ clk = tegra_clk_register_periph_gate("afi", "clk_m", 0, clk_base, 0, 72,
+ &periph_u_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "afi", NULL);
+ clks[afi] = clk;
+
+ /* pcie_xclk */
+ clk = tegra_clk_register_periph_gate("pcie_xclk", "clk_m", 0, clk_base,
+ 0, 74, &periph_u_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "pcie_xclk", NULL);
+ clks[pcie_xclk] = clk;
+
+ /* cdev1 */
+ clk = clk_register_fixed_rate(NULL, "cdev1_fixed", NULL, CLK_IS_ROOT,
+ 26000000);
+ clk = tegra_clk_register_periph_gate("cdev1", "cdev1_fixed", 0,
+ clk_base, 0, 94, &periph_u_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "cdev1", NULL);
+ clks[cdev1] = clk;
+
+ /* cdev2 */
+ clk = clk_register_fixed_rate(NULL, "cdev2_fixed", NULL, CLK_IS_ROOT,
+ 26000000);
+ clk = tegra_clk_register_periph_gate("cdev2", "cdev2_fixed", 0,
+ clk_base, 0, 93, &periph_u_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "cdev2", NULL);
+ clks[cdev2] = clk;
+
+ for (i = 0; i < ARRAY_SIZE(tegra_periph_clk_list); i++) {
+ data = &tegra_periph_clk_list[i];
+ clk = tegra_clk_register_periph(data->name, data->parent_names,
+ data->num_parents, &data->periph,
+ clk_base, data->offset);
+ clk_register_clkdev(clk, data->con_id, data->dev_id);
+ clks[data->clk_id] = clk;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(tegra_periph_nodiv_clk_list); i++) {
+ data = &tegra_periph_nodiv_clk_list[i];
+ clk = tegra_clk_register_periph_nodiv(data->name,
+ data->parent_names,
+ data->num_parents, &data->periph,
+ clk_base, data->offset);
+ clk_register_clkdev(clk, data->con_id, data->dev_id);
+ clks[data->clk_id] = clk;
+ }
+}
+
+
+static void __init tegra20_fixed_clk_init(void)
+{
+ struct clk *clk;
+
+ /* clk_32k */
+ clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, CLK_IS_ROOT,
+ 32768);
+ clk_register_clkdev(clk, "clk_32k", NULL);
+ clks[clk_32k] = clk;
+}
+
+static void __init tegra20_pmc_clk_init(void)
+{
+ struct clk *clk;
+
+ /* blink */
+ writel_relaxed(0, pmc_base + PMC_BLINK_TIMER);
+ clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0,
+ pmc_base + PMC_DPD_PADS_ORIDE,
+ PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL);
+ clk = clk_register_gate(NULL, "blink", "blink_override", 0,
+ pmc_base + PMC_CTRL,
+ PMC_CTRL_BLINK_ENB, 0, NULL);
+ clk_register_clkdev(clk, "blink", NULL);
+ clks[blink] = clk;
+}
+
+static void __init tegra20_osc_clk_init(void)
+{
+ struct clk *clk;
+ unsigned long input_freq;
+ unsigned int pll_ref_div;
+
+ input_freq = tegra20_clk_measure_input_freq();
+
+ /* clk_m */
+ clk = clk_register_fixed_rate(NULL, "clk_m", NULL, CLK_IS_ROOT |
+ CLK_IGNORE_UNUSED, input_freq);
+ clk_register_clkdev(clk, "clk_m", NULL);
+ clks[clk_m] = clk;
+
+ /* pll_ref */
+ pll_ref_div = tegra20_get_pll_ref_div();
+ clk = clk_register_fixed_factor(NULL, "pll_ref", "clk_m",
+ CLK_SET_RATE_PARENT, 1, pll_ref_div);
+ clk_register_clkdev(clk, "pll_ref", NULL);
+ clks[pll_ref] = clk;
+}
+
+/* Tegra20 CPU clock and reset control functions */
+static void tegra20_wait_cpu_in_reset(u32 cpu)
+{
+ unsigned int reg;
+
+ do {
+ reg = readl(clk_base +
+ TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
+ cpu_relax();
+ } while (!(reg & (1 << cpu))); /* check CPU been reset or not */
+
+ return;
+}
+
+static void tegra20_put_cpu_in_reset(u32 cpu)
+{
+ writel(CPU_RESET(cpu),
+ clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
+ dmb();
+}
+
+static void tegra20_cpu_out_of_reset(u32 cpu)
+{
+ writel(CPU_RESET(cpu),
+ clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
+ wmb();
+}
+
+static void tegra20_enable_cpu_clock(u32 cpu)
+{
+ unsigned int reg;
+
+ reg = readl(clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+ writel(reg & ~CPU_CLOCK(cpu),
+ clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+ barrier();
+ reg = readl(clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+}
+
+static void tegra20_disable_cpu_clock(u32 cpu)
+{
+ unsigned int reg;
+
+ reg = readl(clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+ writel(reg | CPU_CLOCK(cpu),
+ clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+}
+
+static struct tegra_cpu_car_ops tegra20_cpu_car_ops = {
+ .wait_for_reset = tegra20_wait_cpu_in_reset,
+ .put_in_reset = tegra20_put_cpu_in_reset,
+ .out_of_reset = tegra20_cpu_out_of_reset,
+ .enable_clock = tegra20_enable_cpu_clock,
+ .disable_clock = tegra20_disable_cpu_clock,
+};
+
+static __initdata struct tegra_clk_init_table init_table[] = {
+ {pll_p, clk_max, 216000000, 1},
+ {pll_p_out1, clk_max, 28800000, 1},
+ {pll_p_out2, clk_max, 48000000, 1},
+ {pll_p_out3, clk_max, 72000000, 1},
+ {pll_p_out4, clk_max, 24000000, 1},
+ {pll_c, clk_max, 600000000, 1},
+ {pll_c_out1, clk_max, 120000000, 1},
+ {sclk, pll_c_out1, 0, 1},
+ {hclk, clk_max, 0, 1},
+ {pclk, clk_max, 60000000, 1},
+ {csite, clk_max, 0, 1},
+ {emc, clk_max, 0, 1},
+ {cclk, clk_max, 0, 1},
+ {uarta, pll_p, 0, 1},
+ {uartd, pll_p, 0, 1},
+ {usbd, clk_max, 12000000, 0},
+ {usb2, clk_max, 12000000, 0},
+ {usb3, clk_max, 12000000, 0},
+ {pll_a, clk_max, 56448000, 1},
+ {pll_a_out0, clk_max, 11289600, 1},
+ {cdev1, clk_max, 0, 1},
+ {blink, clk_max, 32768, 1},
+ {i2s1, pll_a_out0, 11289600, 0},
+ {i2s2, pll_a_out0, 11289600, 0},
+ {sdmmc1, pll_p, 48000000, 0},
+ {sdmmc3, pll_p, 48000000, 0},
+ {sdmmc4, pll_p, 48000000, 0},
+ {spi, pll_p, 20000000, 0},
+ {sbc1, pll_p, 100000000, 0},
+ {sbc2, pll_p, 100000000, 0},
+ {sbc3, pll_p, 100000000, 0},
+ {sbc4, pll_p, 100000000, 0},
+ {host1x, pll_c, 150000000, 0},
+ {disp1, pll_p, 600000000, 0},
+ {disp2, pll_p, 600000000, 0},
+ {clk_max, clk_max, 0, 0}, /* This MUST be the last entry */
+};
+
+/*
+ * Some clocks may be used by different drivers depending on the board
+ * configuration. List those here to register them twice in the clock lookup
+ * table under two names.
+ */
+static struct tegra_clk_duplicate tegra_clk_duplicates[] = {
+ TEGRA_CLK_DUPLICATE(uarta, "serial8250.0", NULL),
+ TEGRA_CLK_DUPLICATE(uartb, "serial8250.1", NULL),
+ TEGRA_CLK_DUPLICATE(uartc, "serial8250.2", NULL),
+ TEGRA_CLK_DUPLICATE(uartd, "serial8250.3", NULL),
+ TEGRA_CLK_DUPLICATE(uarte, "serial8250.4", NULL),
+ TEGRA_CLK_DUPLICATE(usbd, "utmip-pad", NULL),
+ TEGRA_CLK_DUPLICATE(usbd, "tegra-ehci.0", NULL),
+ TEGRA_CLK_DUPLICATE(usbd, "tegra-otg", NULL),
+ TEGRA_CLK_DUPLICATE(pll_p, "tegradc.0", "parent"),
+ TEGRA_CLK_DUPLICATE(pll_p, "tegradc.1", "parent"),
+ TEGRA_CLK_DUPLICATE(pll_d_out0, "hdmi", "parent"),
+ TEGRA_CLK_DUPLICATE(gr2d, "tegra_grhost", "gr2d"),
+ TEGRA_CLK_DUPLICATE(gr3d, "tegra_grhost", "gr3d"),
+ TEGRA_CLK_DUPLICATE(epp, "tegra_grhost", "epp"),
+ TEGRA_CLK_DUPLICATE(mpe, "tegra_grhost", "mpe"),
+ TEGRA_CLK_DUPLICATE(vde, "tegra-aes", "vde"),
+ TEGRA_CLK_DUPLICATE(cclk, NULL, "cpu"),
+ TEGRA_CLK_DUPLICATE(twd, "smp_twd", NULL),
+ TEGRA_CLK_DUPLICATE(pll_p_out3, "tegra-i2c.0", "fast-clk"),
+ TEGRA_CLK_DUPLICATE(pll_p_out3, "tegra-i2c.1", "fast-clk"),
+ TEGRA_CLK_DUPLICATE(pll_p_out3, "tegra-i2c.2", "fast-clk"),
+ TEGRA_CLK_DUPLICATE(pll_p_out3, "tegra-i2c.3", "fast-clk"),
+ TEGRA_CLK_DUPLICATE(clk_max, NULL, NULL), /* Must be the last entry */
+};
+
+static const struct of_device_id pmc_match[] __initconst = {
+ { .compatible = "nvidia,tegra20-pmc" },
+ {},
+};
+
+void __init tegra20_clock_init(struct device_node *np)
+{
+ int i;
+ struct device_node *node;
+
+ clk_base = of_iomap(np, 0);
+ if (!clk_base) {
+ pr_err("Can't map CAR registers\n");
+ BUG();
+ }
+
+ node = of_find_matching_node(NULL, pmc_match);
+ if (!node) {
+ pr_err("Failed to find pmc node\n");
+ BUG();
+ }
+
+ pmc_base = of_iomap(node, 0);
+ if (!pmc_base) {
+ pr_err("Can't map pmc registers\n");
+ BUG();
+ }
+
+ tegra20_osc_clk_init();
+ tegra20_pmc_clk_init();
+ tegra20_fixed_clk_init();
+ tegra20_pll_init();
+ tegra20_super_clk_init();
+ tegra20_periph_clk_init();
+ tegra20_audio_clk_init();
+
+
+ for (i = 0; i < ARRAY_SIZE(clks); i++) {
+ if (IS_ERR(clks[i])) {
+ pr_err("Tegra20 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clks[i]));
+ BUG();
+ }
+ if (!clks[i])
+ clks[i] = ERR_PTR(-EINVAL);
+ }
+
+ tegra_init_dup_clks(tegra_clk_duplicates, clks, clk_max);
+
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ tegra_init_from_table(init_table, clks, clk_max);
+
+ tegra_cpu_car_ops = &tegra20_cpu_car_ops;
+}
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 5fcfa51..82835f2 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -487,4 +487,10 @@ void tegra_init_from_table(struct tegra_clk_init_table *tbl,
void tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
struct clk *clks[], int clk_max);
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+void tegra20_clock_init(struct device_node *np);
+#else
+static inline void tegra20_clock_init(struct device_node *np) {}
+#endif /* CONFIG_ARCH_TEGRA_2x_SOC */
+
#endif /* TEGRA_CLK_H */
--
1.7.10.4
^ permalink raw reply related
* [PATCH V5 3/3] clk: tegra: add clock support for Tegra30
From: Stephen Warren @ 2013-01-16 20:52 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1358369575-7325-1-git-send-email-swarren@wwwdotorg.org>
From: Prashant Gaikwad <pgaikwad@nvidia.com>
Add Tegra30 clock support based on common clock framework.
Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
[swarren: ensure all OF lookups return valid cookies i.e. an explicit
error pointer or valid pointer not NULL, adapt to renames in earlier
patches, fixed some checkpatch issues.]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
drivers/clk/tegra/Makefile | 1 +
drivers/clk/tegra/clk-tegra30.c | 2057 +++++++++++++++++++++++++++++++++++++++
drivers/clk/tegra/clk.h | 6 +
3 files changed, 2064 insertions(+)
create mode 100644 drivers/clk/tegra/clk-tegra30.c
diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile
index 00484fd4..2b41b0f 100644
--- a/drivers/clk/tegra/Makefile
+++ b/drivers/clk/tegra/Makefile
@@ -8,3 +8,4 @@ obj-y += clk-pll-out.o
obj-y += clk-super.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clk-tegra20.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += clk-tegra30.o
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
new file mode 100644
index 0000000..1c2765d
--- /dev/null
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -0,0 +1,2057 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/tegra.h>
+
+#include <mach/powergate.h>
+
+#include "clk.h"
+
+#define RST_DEVICES_L 0x004
+#define RST_DEVICES_H 0x008
+#define RST_DEVICES_U 0x00c
+#define RST_DEVICES_V 0x358
+#define RST_DEVICES_W 0x35c
+#define RST_DEVICES_SET_L 0x300
+#define RST_DEVICES_CLR_L 0x304
+#define RST_DEVICES_SET_H 0x308
+#define RST_DEVICES_CLR_H 0x30c
+#define RST_DEVICES_SET_U 0x310
+#define RST_DEVICES_CLR_U 0x314
+#define RST_DEVICES_SET_V 0x430
+#define RST_DEVICES_CLR_V 0x434
+#define RST_DEVICES_SET_W 0x438
+#define RST_DEVICES_CLR_W 0x43c
+#define RST_DEVICES_NUM 5
+
+#define CLK_OUT_ENB_L 0x010
+#define CLK_OUT_ENB_H 0x014
+#define CLK_OUT_ENB_U 0x018
+#define CLK_OUT_ENB_V 0x360
+#define CLK_OUT_ENB_W 0x364
+#define CLK_OUT_ENB_SET_L 0x320
+#define CLK_OUT_ENB_CLR_L 0x324
+#define CLK_OUT_ENB_SET_H 0x328
+#define CLK_OUT_ENB_CLR_H 0x32c
+#define CLK_OUT_ENB_SET_U 0x330
+#define CLK_OUT_ENB_CLR_U 0x334
+#define CLK_OUT_ENB_SET_V 0x440
+#define CLK_OUT_ENB_CLR_V 0x444
+#define CLK_OUT_ENB_SET_W 0x448
+#define CLK_OUT_ENB_CLR_W 0x44c
+#define CLK_OUT_ENB_NUM 5
+
+#define OSC_CTRL 0x50
+#define OSC_CTRL_OSC_FREQ_MASK (0xF<<28)
+#define OSC_CTRL_OSC_FREQ_13MHZ (0X0<<28)
+#define OSC_CTRL_OSC_FREQ_19_2MHZ (0X4<<28)
+#define OSC_CTRL_OSC_FREQ_12MHZ (0X8<<28)
+#define OSC_CTRL_OSC_FREQ_26MHZ (0XC<<28)
+#define OSC_CTRL_OSC_FREQ_16_8MHZ (0X1<<28)
+#define OSC_CTRL_OSC_FREQ_38_4MHZ (0X5<<28)
+#define OSC_CTRL_OSC_FREQ_48MHZ (0X9<<28)
+#define OSC_CTRL_MASK (0x3f2 | OSC_CTRL_OSC_FREQ_MASK)
+
+#define OSC_CTRL_PLL_REF_DIV_MASK (3<<26)
+#define OSC_CTRL_PLL_REF_DIV_1 (0<<26)
+#define OSC_CTRL_PLL_REF_DIV_2 (1<<26)
+#define OSC_CTRL_PLL_REF_DIV_4 (2<<26)
+
+#define OSC_FREQ_DET 0x58
+#define OSC_FREQ_DET_TRIG BIT(31)
+
+#define OSC_FREQ_DET_STATUS 0x5c
+#define OSC_FREQ_DET_BUSY BIT(31)
+#define OSC_FREQ_DET_CNT_MASK 0xffff
+
+#define CCLKG_BURST_POLICY 0x368
+#define SUPER_CCLKG_DIVIDER 0x36c
+#define CCLKLP_BURST_POLICY 0x370
+#define SUPER_CCLKLP_DIVIDER 0x374
+#define SCLK_BURST_POLICY 0x028
+#define SUPER_SCLK_DIVIDER 0x02c
+
+#define SYSTEM_CLK_RATE 0x030
+
+#define PLLC_BASE 0x80
+#define PLLC_MISC 0x8c
+#define PLLM_BASE 0x90
+#define PLLM_MISC 0x9c
+#define PLLP_BASE 0xa0
+#define PLLP_MISC 0xac
+#define PLLX_BASE 0xe0
+#define PLLX_MISC 0xe4
+#define PLLD_BASE 0xd0
+#define PLLD_MISC 0xdc
+#define PLLD2_BASE 0x4b8
+#define PLLD2_MISC 0x4bc
+#define PLLE_BASE 0xe8
+#define PLLE_MISC 0xec
+#define PLLA_BASE 0xb0
+#define PLLA_MISC 0xbc
+#define PLLU_BASE 0xc0
+#define PLLU_MISC 0xcc
+
+#define PLL_MISC_LOCK_ENABLE 18
+#define PLLDU_MISC_LOCK_ENABLE 22
+#define PLLE_MISC_LOCK_ENABLE 9
+
+#define PLL_BASE_LOCK 27
+#define PLLE_MISC_LOCK 11
+
+#define PLLE_AUX 0x48c
+#define PLLC_OUT 0x84
+#define PLLM_OUT 0x94
+#define PLLP_OUTA 0xa4
+#define PLLP_OUTB 0xa8
+#define PLLA_OUT 0xb4
+
+#define AUDIO_SYNC_CLK_I2S0 0x4a0
+#define AUDIO_SYNC_CLK_I2S1 0x4a4
+#define AUDIO_SYNC_CLK_I2S2 0x4a8
+#define AUDIO_SYNC_CLK_I2S3 0x4ac
+#define AUDIO_SYNC_CLK_I2S4 0x4b0
+#define AUDIO_SYNC_CLK_SPDIF 0x4b4
+
+#define PMC_CLK_OUT_CNTRL 0x1a8
+
+#define CLK_SOURCE_I2S0 0x1d8
+#define CLK_SOURCE_I2S1 0x100
+#define CLK_SOURCE_I2S2 0x104
+#define CLK_SOURCE_I2S3 0x3bc
+#define CLK_SOURCE_I2S4 0x3c0
+#define CLK_SOURCE_SPDIF_OUT 0x108
+#define CLK_SOURCE_SPDIF_IN 0x10c
+#define CLK_SOURCE_PWM 0x110
+#define CLK_SOURCE_D_AUDIO 0x3d0
+#define CLK_SOURCE_DAM0 0x3d8
+#define CLK_SOURCE_DAM1 0x3dc
+#define CLK_SOURCE_DAM2 0x3e0
+#define CLK_SOURCE_HDA 0x428
+#define CLK_SOURCE_HDA2CODEC_2X 0x3e4
+#define CLK_SOURCE_SBC1 0x134
+#define CLK_SOURCE_SBC2 0x118
+#define CLK_SOURCE_SBC3 0x11c
+#define CLK_SOURCE_SBC4 0x1b4
+#define CLK_SOURCE_SBC5 0x3c8
+#define CLK_SOURCE_SBC6 0x3cc
+#define CLK_SOURCE_SATA_OOB 0x420
+#define CLK_SOURCE_SATA 0x424
+#define CLK_SOURCE_NDFLASH 0x160
+#define CLK_SOURCE_NDSPEED 0x3f8
+#define CLK_SOURCE_VFIR 0x168
+#define CLK_SOURCE_SDMMC1 0x150
+#define CLK_SOURCE_SDMMC2 0x154
+#define CLK_SOURCE_SDMMC3 0x1bc
+#define CLK_SOURCE_SDMMC4 0x164
+#define CLK_SOURCE_VDE 0x1c8
+#define CLK_SOURCE_CSITE 0x1d4
+#define CLK_SOURCE_LA 0x1f8
+#define CLK_SOURCE_OWR 0x1cc
+#define CLK_SOURCE_NOR 0x1d0
+#define CLK_SOURCE_MIPI 0x174
+#define CLK_SOURCE_I2C1 0x124
+#define CLK_SOURCE_I2C2 0x198
+#define CLK_SOURCE_I2C3 0x1b8
+#define CLK_SOURCE_I2C4 0x3c4
+#define CLK_SOURCE_I2C5 0x128
+#define CLK_SOURCE_UARTA 0x178
+#define CLK_SOURCE_UARTB 0x17c
+#define CLK_SOURCE_UARTC 0x1a0
+#define CLK_SOURCE_UARTD 0x1c0
+#define CLK_SOURCE_UARTE 0x1c4
+#define CLK_SOURCE_VI 0x148
+#define CLK_SOURCE_VI_SENSOR 0x1a8
+#define CLK_SOURCE_3D 0x158
+#define CLK_SOURCE_3D2 0x3b0
+#define CLK_SOURCE_2D 0x15c
+#define CLK_SOURCE_EPP 0x16c
+#define CLK_SOURCE_MPE 0x170
+#define CLK_SOURCE_HOST1X 0x180
+#define CLK_SOURCE_CVE 0x140
+#define CLK_SOURCE_TVO 0x188
+#define CLK_SOURCE_DTV 0x1dc
+#define CLK_SOURCE_HDMI 0x18c
+#define CLK_SOURCE_TVDAC 0x194
+#define CLK_SOURCE_DISP1 0x138
+#define CLK_SOURCE_DISP2 0x13c
+#define CLK_SOURCE_DSIB 0xd0
+#define CLK_SOURCE_TSENSOR 0x3b8
+#define CLK_SOURCE_ACTMON 0x3e8
+#define CLK_SOURCE_EXTERN1 0x3ec
+#define CLK_SOURCE_EXTERN2 0x3f0
+#define CLK_SOURCE_EXTERN3 0x3f4
+#define CLK_SOURCE_I2CSLOW 0x3fc
+#define CLK_SOURCE_SE 0x42c
+#define CLK_SOURCE_MSELECT 0x3b4
+#define CLK_SOURCE_EMC 0x19c
+
+#define AUDIO_SYNC_DOUBLER 0x49c
+
+#define PMC_CTRL 0
+#define PMC_CTRL_BLINK_ENB 7
+
+#define PMC_DPD_PADS_ORIDE 0x1c
+#define PMC_DPD_PADS_ORIDE_BLINK_ENB 20
+#define PMC_BLINK_TIMER 0x40
+
+#define UTMIP_PLL_CFG2 0x488
+#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
+#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
+
+#define UTMIP_PLL_CFG1 0x484
+#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
+#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
+#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
+
+/* Tegra CPU clock and reset control regs */
+#define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX 0x4c
+#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET 0x340
+#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR 0x344
+#define TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR 0x34c
+#define TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470
+
+#define CPU_CLOCK(cpu) (0x1 << (8 + cpu))
+#define CPU_RESET(cpu) (0x1111ul << (cpu))
+
+#define CLK_RESET_CCLK_BURST 0x20
+#define CLK_RESET_CCLK_DIVIDER 0x24
+#define CLK_RESET_PLLX_BASE 0xe0
+#define CLK_RESET_PLLX_MISC 0xe4
+
+#define CLK_RESET_SOURCE_CSITE 0x1d4
+
+#define CLK_RESET_CCLK_BURST_POLICY_SHIFT 28
+#define CLK_RESET_CCLK_RUN_POLICY_SHIFT 4
+#define CLK_RESET_CCLK_IDLE_POLICY_SHIFT 0
+#define CLK_RESET_CCLK_IDLE_POLICY 1
+#define CLK_RESET_CCLK_RUN_POLICY 2
+#define CLK_RESET_CCLK_BURST_POLICY_PLLX 8
+
+#ifdef CONFIG_PM_SLEEP
+static struct cpu_clk_suspend_context {
+ u32 pllx_misc;
+ u32 pllx_base;
+
+ u32 cpu_burst;
+ u32 clk_csite_src;
+ u32 cclk_divider;
+} tegra30_cpu_clk_sctx;
+#endif
+
+static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32];
+
+static void __iomem *clk_base;
+static void __iomem *pmc_base;
+static unsigned long input_freq;
+
+static DEFINE_SPINLOCK(clk_doubler_lock);
+static DEFINE_SPINLOCK(clk_out_lock);
+static DEFINE_SPINLOCK(pll_div_lock);
+static DEFINE_SPINLOCK(cml_lock);
+static DEFINE_SPINLOCK(pll_d_lock);
+
+#define TEGRA_INIT_DATA_MUX(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
+ 30, 2, 0, 0, 8, 1, 0, _regs, _clk_num, \
+ periph_clk_enb_refcnt, _gate_flags, _clk_id)
+
+#define TEGRA_INIT_DATA_DIV16(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
+ 30, 2, 0, 0, 16, 0, TEGRA_DIVIDER_ROUND_UP, \
+ _regs, _clk_num, periph_clk_enb_refcnt, \
+ _gate_flags, _clk_id)
+
+#define TEGRA_INIT_DATA_MUX8(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
+ 29, 3, 0, 0, 8, 1, 0, _regs, _clk_num, \
+ periph_clk_enb_refcnt, _gate_flags, _clk_id)
+
+#define TEGRA_INIT_DATA_INT(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
+ 30, 2, 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs, \
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id)
+
+#define TEGRA_INIT_DATA_UART(_name, _con_id, _dev_id, _parents, _offset,\
+ _clk_num, _regs, _clk_id) \
+ TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
+ 30, 2, 0, 0, 16, 1, TEGRA_DIVIDER_UART, _regs, \
+ _clk_num, periph_clk_enb_refcnt, 0, _clk_id)
+
+#define TEGRA_INIT_DATA_NODIV(_name, _con_id, _dev_id, _parents, _offset, \
+ _mux_shift, _mux_width, _clk_num, _regs, \
+ _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
+ _mux_shift, _mux_width, 0, 0, 0, 0, 0, _regs, \
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id)
+
+/*
+ * IDs assigned here must be in sync with DT bindings definition
+ * for Tegra30 clocks.
+ */
+enum tegra30_clk {
+ cpu, rtc = 4, timer, uarta, gpio = 8, sdmmc2, i2s1 = 11, i2c1, ndflash,
+ sdmmc1, sdmmc4, pwm = 17, i2s2, epp, gr2d = 21, usbd, isp, gr3d,
+ disp2 = 26, disp1, host1x, vcp, i2s0, cop_cache, mc, ahbdma, apbdma,
+ kbc = 36, statmon, pmc, kfuse = 40, sbc1, nor, sbc2 = 44, sbc3 = 46,
+ i2c5, dsia, mipi = 50, hdmi, csi, tvdac, i2c2, uartc, emc = 57, usb2,
+ usb3, mpe, vde, bsea, bsev, speedo, uartd, uarte, i2c3, sbc4, sdmmc3,
+ pcie, owr, afi, csite, pciex, avpucq, la, dtv = 79, ndspeed, i2c_slow,
+ dsib, irama = 84, iramb, iramc, iramd, cram2, audio_2x = 90, csus = 92,
+ cdev1, cdev2, cpu_g = 96, cpu_lp, gr3d2, mselect, tsensor, i2s3, i2s4,
+ i2c4, sbc5, sbc6, d_audio, apbif, dam0, dam1, dam2, hda2codec_2x,
+ atomics, audio0_2x, audio1_2x, audio2_2x, audio3_2x, audio4_2x,
+ spdif_2x, actmon, extern1, extern2, extern3, sata_oob, sata, hda, se,
+ hda2hdmi, sata_cold, uartb = 160, vfir, spdif_out, spdif_in, vi,
+ vi_sensor, fuse, fuse_burn, cve, tvo, clk_32k, clk_m, clk_m_div2,
+ clk_m_div4, pll_ref, pll_c, pll_c_out1, pll_m, pll_m_out1, pll_p,
+ pll_p_out1, pll_p_out2, pll_p_out3, pll_p_out4, pll_a, pll_a_out0,
+ pll_d, pll_d_out0, pll_d2, pll_d2_out0, pll_u, pll_x, pll_x_out0, pll_e,
+ spdif_in_sync, i2s0_sync, i2s1_sync, i2s2_sync, i2s3_sync, i2s4_sync,
+ vimclk_sync, audio0, audio1, audio2, audio3, audio4, spdif, clk_out_1,
+ clk_out_2, clk_out_3, sclk, blink, cclk_g, cclk_lp, twd, cml0, cml1,
+ i2cslow, hclk, pclk, clk_out_1_mux = 300, clk_max
+};
+
+static struct clk *clks[clk_max];
+static struct clk_onecell_data clk_data;
+
+/*
+ * Structure defining the fields for USB UTMI clocks Parameters.
+ */
+struct utmi_clk_param {
+ /* Oscillator Frequency in KHz */
+ u32 osc_frequency;
+ /* UTMIP PLL Enable Delay Count */
+ u8 enable_delay_count;
+ /* UTMIP PLL Stable count */
+ u8 stable_count;
+ /* UTMIP PLL Active delay count */
+ u8 active_delay_count;
+ /* UTMIP PLL Xtal frequency count */
+ u8 xtal_freq_count;
+};
+
+static const struct utmi_clk_param utmi_parameters[] = {
+/* OSC_FREQUENCY, ENABLE_DLY, STABLE_CNT, ACTIVE_DLY, XTAL_FREQ_CNT */
+ {13000000, 0x02, 0x33, 0x05, 0x7F},
+ {19200000, 0x03, 0x4B, 0x06, 0xBB},
+ {12000000, 0x02, 0x2F, 0x04, 0x76},
+ {26000000, 0x04, 0x66, 0x09, 0xFE},
+ {16800000, 0x03, 0x41, 0x0A, 0xA4},
+};
+
+static struct tegra_clk_pll_freq_table pll_c_freq_table[] = {
+ { 12000000, 1040000000, 520, 6, 1, 8},
+ { 13000000, 1040000000, 480, 6, 1, 8},
+ { 16800000, 1040000000, 495, 8, 1, 8}, /* actual: 1039.5 MHz */
+ { 19200000, 1040000000, 325, 6, 1, 6},
+ { 26000000, 1040000000, 520, 13, 1, 8},
+
+ { 12000000, 832000000, 416, 6, 1, 8},
+ { 13000000, 832000000, 832, 13, 1, 8},
+ { 16800000, 832000000, 396, 8, 1, 8}, /* actual: 831.6 MHz */
+ { 19200000, 832000000, 260, 6, 1, 8},
+ { 26000000, 832000000, 416, 13, 1, 8},
+
+ { 12000000, 624000000, 624, 12, 1, 8},
+ { 13000000, 624000000, 624, 13, 1, 8},
+ { 16800000, 600000000, 520, 14, 1, 8},
+ { 19200000, 624000000, 520, 16, 1, 8},
+ { 26000000, 624000000, 624, 26, 1, 8},
+
+ { 12000000, 600000000, 600, 12, 1, 8},
+ { 13000000, 600000000, 600, 13, 1, 8},
+ { 16800000, 600000000, 500, 14, 1, 8},
+ { 19200000, 600000000, 375, 12, 1, 6},
+ { 26000000, 600000000, 600, 26, 1, 8},
+
+ { 12000000, 520000000, 520, 12, 1, 8},
+ { 13000000, 520000000, 520, 13, 1, 8},
+ { 16800000, 520000000, 495, 16, 1, 8}, /* actual: 519.75 MHz */
+ { 19200000, 520000000, 325, 12, 1, 6},
+ { 26000000, 520000000, 520, 26, 1, 8},
+
+ { 12000000, 416000000, 416, 12, 1, 8},
+ { 13000000, 416000000, 416, 13, 1, 8},
+ { 16800000, 416000000, 396, 16, 1, 8}, /* actual: 415.8 MHz */
+ { 19200000, 416000000, 260, 12, 1, 6},
+ { 26000000, 416000000, 416, 26, 1, 8},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_m_freq_table[] = {
+ { 12000000, 666000000, 666, 12, 1, 8},
+ { 13000000, 666000000, 666, 13, 1, 8},
+ { 16800000, 666000000, 555, 14, 1, 8},
+ { 19200000, 666000000, 555, 16, 1, 8},
+ { 26000000, 666000000, 666, 26, 1, 8},
+ { 12000000, 600000000, 600, 12, 1, 8},
+ { 13000000, 600000000, 600, 13, 1, 8},
+ { 16800000, 600000000, 500, 14, 1, 8},
+ { 19200000, 600000000, 375, 12, 1, 6},
+ { 26000000, 600000000, 600, 26, 1, 8},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_p_freq_table[] = {
+ { 12000000, 216000000, 432, 12, 2, 8},
+ { 13000000, 216000000, 432, 13, 2, 8},
+ { 16800000, 216000000, 360, 14, 2, 8},
+ { 19200000, 216000000, 360, 16, 2, 8},
+ { 26000000, 216000000, 432, 26, 2, 8},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_a_freq_table[] = {
+ { 9600000, 564480000, 294, 5, 1, 4},
+ { 9600000, 552960000, 288, 5, 1, 4},
+ { 9600000, 24000000, 5, 2, 1, 1},
+
+ { 28800000, 56448000, 49, 25, 1, 1},
+ { 28800000, 73728000, 64, 25, 1, 1},
+ { 28800000, 24000000, 5, 6, 1, 1},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_d_freq_table[] = {
+ { 12000000, 216000000, 216, 12, 1, 4},
+ { 13000000, 216000000, 216, 13, 1, 4},
+ { 16800000, 216000000, 180, 14, 1, 4},
+ { 19200000, 216000000, 180, 16, 1, 4},
+ { 26000000, 216000000, 216, 26, 1, 4},
+
+ { 12000000, 594000000, 594, 12, 1, 8},
+ { 13000000, 594000000, 594, 13, 1, 8},
+ { 16800000, 594000000, 495, 14, 1, 8},
+ { 19200000, 594000000, 495, 16, 1, 8},
+ { 26000000, 594000000, 594, 26, 1, 8},
+
+ { 12000000, 1000000000, 1000, 12, 1, 12},
+ { 13000000, 1000000000, 1000, 13, 1, 12},
+ { 19200000, 1000000000, 625, 12, 1, 8},
+ { 26000000, 1000000000, 1000, 26, 1, 12},
+
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_u_freq_table[] = {
+ { 12000000, 480000000, 960, 12, 2, 12},
+ { 13000000, 480000000, 960, 13, 2, 12},
+ { 16800000, 480000000, 400, 7, 2, 5},
+ { 19200000, 480000000, 200, 4, 2, 3},
+ { 26000000, 480000000, 960, 26, 2, 12},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_x_freq_table[] = {
+ /* 1.7 GHz */
+ { 12000000, 1700000000, 850, 6, 1, 8},
+ { 13000000, 1700000000, 915, 7, 1, 8}, /* actual: 1699.2 MHz */
+ { 16800000, 1700000000, 708, 7, 1, 8}, /* actual: 1699.2 MHz */
+ { 19200000, 1700000000, 885, 10, 1, 8}, /* actual: 1699.2 MHz */
+ { 26000000, 1700000000, 850, 13, 1, 8},
+
+ /* 1.6 GHz */
+ { 12000000, 1600000000, 800, 6, 1, 8},
+ { 13000000, 1600000000, 738, 6, 1, 8}, /* actual: 1599.0 MHz */
+ { 16800000, 1600000000, 857, 9, 1, 8}, /* actual: 1599.7 MHz */
+ { 19200000, 1600000000, 500, 6, 1, 8},
+ { 26000000, 1600000000, 800, 13, 1, 8},
+
+ /* 1.5 GHz */
+ { 12000000, 1500000000, 750, 6, 1, 8},
+ { 13000000, 1500000000, 923, 8, 1, 8}, /* actual: 1499.8 MHz */
+ { 16800000, 1500000000, 625, 7, 1, 8},
+ { 19200000, 1500000000, 625, 8, 1, 8},
+ { 26000000, 1500000000, 750, 13, 1, 8},
+
+ /* 1.4 GHz */
+ { 12000000, 1400000000, 700, 6, 1, 8},
+ { 13000000, 1400000000, 969, 9, 1, 8}, /* actual: 1399.7 MHz */
+ { 16800000, 1400000000, 1000, 12, 1, 8},
+ { 19200000, 1400000000, 875, 12, 1, 8},
+ { 26000000, 1400000000, 700, 13, 1, 8},
+
+ /* 1.3 GHz */
+ { 12000000, 1300000000, 975, 9, 1, 8},
+ { 13000000, 1300000000, 1000, 10, 1, 8},
+ { 16800000, 1300000000, 928, 12, 1, 8}, /* actual: 1299.2 MHz */
+ { 19200000, 1300000000, 812, 12, 1, 8}, /* actual: 1299.2 MHz */
+ { 26000000, 1300000000, 650, 13, 1, 8},
+
+ /* 1.2 GHz */
+ { 12000000, 1200000000, 1000, 10, 1, 8},
+ { 13000000, 1200000000, 923, 10, 1, 8}, /* actual: 1199.9 MHz */
+ { 16800000, 1200000000, 1000, 14, 1, 8},
+ { 19200000, 1200000000, 1000, 16, 1, 8},
+ { 26000000, 1200000000, 600, 13, 1, 8},
+
+ /* 1.1 GHz */
+ { 12000000, 1100000000, 825, 9, 1, 8},
+ { 13000000, 1100000000, 846, 10, 1, 8}, /* actual: 1099.8 MHz */
+ { 16800000, 1100000000, 982, 15, 1, 8}, /* actual: 1099.8 MHz */
+ { 19200000, 1100000000, 859, 15, 1, 8}, /* actual: 1099.5 MHz */
+ { 26000000, 1100000000, 550, 13, 1, 8},
+
+ /* 1 GHz */
+ { 12000000, 1000000000, 1000, 12, 1, 8},
+ { 13000000, 1000000000, 1000, 13, 1, 8},
+ { 16800000, 1000000000, 833, 14, 1, 8}, /* actual: 999.6 MHz */
+ { 19200000, 1000000000, 625, 12, 1, 8},
+ { 26000000, 1000000000, 1000, 26, 1, 8},
+
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_e_freq_table[] = {
+ /* PLLE special case: use cpcon field to store cml divider value */
+ { 12000000, 100000000, 150, 1, 18, 11},
+ { 216000000, 100000000, 200, 18, 24, 13},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+/* PLL parameters */
+static struct tegra_clk_pll_params pll_c_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1400000000,
+ .base_reg = PLLC_BASE,
+ .misc_reg = PLLC_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_params pll_m_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1200000000,
+ .base_reg = PLLM_BASE,
+ .misc_reg = PLLM_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_params pll_p_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1400000000,
+ .base_reg = PLLP_BASE,
+ .misc_reg = PLLP_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_params pll_a_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1400000000,
+ .base_reg = PLLA_BASE,
+ .misc_reg = PLLA_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_params pll_d_params = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 40000000,
+ .vco_max = 1000000000,
+ .base_reg = PLLD_BASE,
+ .misc_reg = PLLD_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
+ .lock_delay = 1000,
+};
+
+static struct tegra_clk_pll_params pll_d2_params = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 40000000,
+ .vco_max = 1000000000,
+ .base_reg = PLLD2_BASE,
+ .misc_reg = PLLD2_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
+ .lock_delay = 1000,
+};
+
+static struct tegra_clk_pll_params pll_u_params = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 48000000,
+ .vco_max = 960000000,
+ .base_reg = PLLU_BASE,
+ .misc_reg = PLLU_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
+ .lock_delay = 1000,
+};
+
+static struct tegra_clk_pll_params pll_x_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1700000000,
+ .base_reg = PLLX_BASE,
+ .misc_reg = PLLX_MISC,
+ .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_params pll_e_params = {
+ .input_min = 12000000,
+ .input_max = 216000000,
+ .cf_min = 12000000,
+ .cf_max = 12000000,
+ .vco_min = 1200000000,
+ .vco_max = 2400000000U,
+ .base_reg = PLLE_BASE,
+ .misc_reg = PLLE_MISC,
+ .lock_bit_idx = PLLE_MISC_LOCK,
+ .lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+/* Peripheral clock registers */
+static struct tegra_clk_periph_regs periph_l_regs = {
+ .enb_reg = CLK_OUT_ENB_L,
+ .enb_set_reg = CLK_OUT_ENB_SET_L,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_L,
+ .rst_reg = RST_DEVICES_L,
+ .rst_set_reg = RST_DEVICES_SET_L,
+ .rst_clr_reg = RST_DEVICES_CLR_L,
+};
+
+static struct tegra_clk_periph_regs periph_h_regs = {
+ .enb_reg = CLK_OUT_ENB_H,
+ .enb_set_reg = CLK_OUT_ENB_SET_H,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_H,
+ .rst_reg = RST_DEVICES_H,
+ .rst_set_reg = RST_DEVICES_SET_H,
+ .rst_clr_reg = RST_DEVICES_CLR_H,
+};
+
+static struct tegra_clk_periph_regs periph_u_regs = {
+ .enb_reg = CLK_OUT_ENB_U,
+ .enb_set_reg = CLK_OUT_ENB_SET_U,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_U,
+ .rst_reg = RST_DEVICES_U,
+ .rst_set_reg = RST_DEVICES_SET_U,
+ .rst_clr_reg = RST_DEVICES_CLR_U,
+};
+
+static struct tegra_clk_periph_regs periph_v_regs = {
+ .enb_reg = CLK_OUT_ENB_V,
+ .enb_set_reg = CLK_OUT_ENB_SET_V,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_V,
+ .rst_reg = RST_DEVICES_V,
+ .rst_set_reg = RST_DEVICES_SET_V,
+ .rst_clr_reg = RST_DEVICES_CLR_V,
+};
+
+static struct tegra_clk_periph_regs periph_w_regs = {
+ .enb_reg = CLK_OUT_ENB_W,
+ .enb_set_reg = CLK_OUT_ENB_SET_W,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_W,
+ .rst_reg = RST_DEVICES_W,
+ .rst_set_reg = RST_DEVICES_SET_W,
+ .rst_clr_reg = RST_DEVICES_CLR_W,
+};
+
+static void tegra30_clk_measure_input_freq(void)
+{
+ u32 osc_ctrl = readl_relaxed(clk_base + OSC_CTRL);
+ u32 auto_clk_control = osc_ctrl & OSC_CTRL_OSC_FREQ_MASK;
+ u32 pll_ref_div = osc_ctrl & OSC_CTRL_PLL_REF_DIV_MASK;
+
+ switch (auto_clk_control) {
+ case OSC_CTRL_OSC_FREQ_12MHZ:
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+ input_freq = 12000000;
+ break;
+ case OSC_CTRL_OSC_FREQ_13MHZ:
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+ input_freq = 13000000;
+ break;
+ case OSC_CTRL_OSC_FREQ_19_2MHZ:
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+ input_freq = 19200000;
+ break;
+ case OSC_CTRL_OSC_FREQ_26MHZ:
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+ input_freq = 26000000;
+ break;
+ case OSC_CTRL_OSC_FREQ_16_8MHZ:
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+ input_freq = 16800000;
+ break;
+ case OSC_CTRL_OSC_FREQ_38_4MHZ:
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_2);
+ input_freq = 38400000;
+ break;
+ case OSC_CTRL_OSC_FREQ_48MHZ:
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_4);
+ input_freq = 48000000;
+ break;
+ default:
+ pr_err("Unexpected auto clock control value %d",
+ auto_clk_control);
+ BUG();
+ return;
+ }
+}
+
+static unsigned int tegra30_get_pll_ref_div(void)
+{
+ u32 pll_ref_div = readl_relaxed(clk_base + OSC_CTRL) &
+ OSC_CTRL_PLL_REF_DIV_MASK;
+
+ switch (pll_ref_div) {
+ case OSC_CTRL_PLL_REF_DIV_1:
+ return 1;
+ case OSC_CTRL_PLL_REF_DIV_2:
+ return 2;
+ case OSC_CTRL_PLL_REF_DIV_4:
+ return 4;
+ default:
+ pr_err("Invalid pll ref divider %d", pll_ref_div);
+ BUG();
+ }
+ return 0;
+}
+
+static void tegra30_utmi_param_configure(void)
+{
+ u32 reg;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
+ if (input_freq == utmi_parameters[i].osc_frequency)
+ break;
+ }
+
+ if (i >= ARRAY_SIZE(utmi_parameters)) {
+ pr_err("%s: Unexpected input rate %lu\n", __func__, input_freq);
+ return;
+ }
+
+ reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
+
+ /* Program UTMIP PLL stable and active counts */
+ reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
+ reg |= UTMIP_PLL_CFG2_STABLE_COUNT(
+ utmi_parameters[i].stable_count);
+
+ reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
+
+ reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(
+ utmi_parameters[i].active_delay_count);
+
+ /* Remove power downs from UTMIP PLL control bits */
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
+
+ writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
+
+ /* Program UTMIP PLL delay and oscillator frequency counts */
+ reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
+ reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
+
+ reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(
+ utmi_parameters[i].enable_delay_count);
+
+ reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
+ reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(
+ utmi_parameters[i].xtal_freq_count);
+
+ /* Remove power downs from UTMIP PLL control bits */
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
+
+ writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
+}
+
+static const char *pll_e_parents[] = {"pll_ref", "pll_p"};
+
+static void __init tegra30_pll_init(void)
+{
+ struct clk *clk;
+
+ /* PLLC */
+ clk = tegra_clk_register_pll("pll_c", "pll_ref", clk_base, pmc_base, 0,
+ 0, &pll_c_params,
+ TEGRA_PLL_HAS_CPCON | TEGRA_PLL_USE_LOCK,
+ pll_c_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_c", NULL);
+ clks[pll_c] = clk;
+
+ /* PLLC_OUT1 */
+ clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c",
+ clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_c_out1", "pll_c_out1_div",
+ clk_base + PLLC_OUT, 1, 0, CLK_SET_RATE_PARENT,
+ 0, NULL);
+ clk_register_clkdev(clk, "pll_c_out1", NULL);
+ clks[pll_c_out1] = clk;
+
+ /* PLLP */
+ clk = tegra_clk_register_pll("pll_p", "pll_ref", clk_base, pmc_base, 0,
+ 408000000, &pll_p_params,
+ TEGRA_PLL_FIXED | TEGRA_PLL_HAS_CPCON |
+ TEGRA_PLL_USE_LOCK, pll_p_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_p", NULL);
+ clks[pll_p] = clk;
+
+ /* PLLP_OUT1 */
+ clk = tegra_clk_register_divider("pll_p_out1_div", "pll_p",
+ clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED |
+ TEGRA_DIVIDER_ROUND_UP, 8, 8, 1,
+ &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out1", "pll_p_out1_div",
+ clk_base + PLLP_OUTA, 1, 0,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out1", NULL);
+ clks[pll_p_out1] = clk;
+
+ /* PLLP_OUT2 */
+ clk = tegra_clk_register_divider("pll_p_out2_div", "pll_p",
+ clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED |
+ TEGRA_DIVIDER_ROUND_UP, 24, 8, 1,
+ &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out2", "pll_p_out2_div",
+ clk_base + PLLP_OUTA, 17, 16,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out2", NULL);
+ clks[pll_p_out2] = clk;
+
+ /* PLLP_OUT3 */
+ clk = tegra_clk_register_divider("pll_p_out3_div", "pll_p",
+ clk_base + PLLP_OUTB, 0, TEGRA_DIVIDER_FIXED |
+ TEGRA_DIVIDER_ROUND_UP, 8, 8, 1,
+ &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out3", "pll_p_out3_div",
+ clk_base + PLLP_OUTB, 1, 0,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out3", NULL);
+ clks[pll_p_out3] = clk;
+
+ /* PLLP_OUT4 */
+ clk = tegra_clk_register_divider("pll_p_out4_div", "pll_p",
+ clk_base + PLLP_OUTB, 0, TEGRA_DIVIDER_FIXED |
+ TEGRA_DIVIDER_ROUND_UP, 24, 8, 1,
+ &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out4", "pll_p_out4_div",
+ clk_base + PLLP_OUTB, 17, 16,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out4", NULL);
+ clks[pll_p_out4] = clk;
+
+ /* PLLM */
+ clk = tegra_clk_register_pll("pll_m", "pll_ref", clk_base, pmc_base,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE, 0,
+ &pll_m_params, TEGRA_PLLM | TEGRA_PLL_HAS_CPCON |
+ TEGRA_PLL_SET_DCCON | TEGRA_PLL_USE_LOCK,
+ pll_m_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_m", NULL);
+ clks[pll_m] = clk;
+
+ /* PLLM_OUT1 */
+ clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m",
+ clk_base + PLLM_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_m_out1", "pll_m_out1_div",
+ clk_base + PLLM_OUT, 1, 0, CLK_IGNORE_UNUSED |
+ CLK_SET_RATE_PARENT, 0, NULL);
+ clk_register_clkdev(clk, "pll_m_out1", NULL);
+ clks[pll_m_out1] = clk;
+
+ /* PLLX */
+ clk = tegra_clk_register_pll("pll_x", "pll_ref", clk_base, pmc_base, 0,
+ 0, &pll_x_params, TEGRA_PLL_HAS_CPCON |
+ TEGRA_PLL_SET_DCCON | TEGRA_PLL_USE_LOCK,
+ pll_x_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_x", NULL);
+ clks[pll_x] = clk;
+
+ /* PLLX_OUT0 */
+ clk = clk_register_fixed_factor(NULL, "pll_x_out0", "pll_x",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll_x_out0", NULL);
+ clks[pll_x_out0] = clk;
+
+ /* PLLU */
+ clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc_base, 0,
+ 0, &pll_u_params, TEGRA_PLLU | TEGRA_PLL_HAS_CPCON |
+ TEGRA_PLL_SET_LFCON | TEGRA_PLL_USE_LOCK,
+ pll_u_freq_table,
+ NULL);
+ clk_register_clkdev(clk, "pll_u", NULL);
+ clks[pll_u] = clk;
+
+ tegra30_utmi_param_configure();
+
+ /* PLLD */
+ clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc_base, 0,
+ 0, &pll_d_params, TEGRA_PLL_HAS_CPCON |
+ TEGRA_PLL_SET_LFCON | TEGRA_PLL_USE_LOCK,
+ pll_d_freq_table, &pll_d_lock);
+ clk_register_clkdev(clk, "pll_d", NULL);
+ clks[pll_d] = clk;
+
+ /* PLLD_OUT0 */
+ clk = clk_register_fixed_factor(NULL, "pll_d_out0", "pll_d",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll_d_out0", NULL);
+ clks[pll_d_out0] = clk;
+
+ /* PLLD2 */
+ clk = tegra_clk_register_pll("pll_d2", "pll_ref", clk_base, pmc_base, 0,
+ 0, &pll_d2_params, TEGRA_PLL_HAS_CPCON |
+ TEGRA_PLL_SET_LFCON | TEGRA_PLL_USE_LOCK,
+ pll_d_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_d2", NULL);
+ clks[pll_d2] = clk;
+
+ /* PLLD2_OUT0 */
+ clk = clk_register_fixed_factor(NULL, "pll_d2_out0", "pll_d2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll_d2_out0", NULL);
+ clks[pll_d2_out0] = clk;
+
+ /* PLLA */
+ clk = tegra_clk_register_pll("pll_a", "pll_p_out1", clk_base, pmc_base,
+ 0, 0, &pll_a_params, TEGRA_PLL_HAS_CPCON |
+ TEGRA_PLL_USE_LOCK, pll_a_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_a", NULL);
+ clks[pll_a] = clk;
+
+ /* PLLA_OUT0 */
+ clk = tegra_clk_register_divider("pll_a_out0_div", "pll_a",
+ clk_base + PLLA_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_a_out0", "pll_a_out0_div",
+ clk_base + PLLA_OUT, 1, 0, CLK_IGNORE_UNUSED |
+ CLK_SET_RATE_PARENT, 0, NULL);
+ clk_register_clkdev(clk, "pll_a_out0", NULL);
+ clks[pll_a_out0] = clk;
+
+ /* PLLE */
+ clk = clk_register_mux(NULL, "pll_e_mux", pll_e_parents,
+ ARRAY_SIZE(pll_e_parents), 0,
+ clk_base + PLLE_AUX, 2, 1, 0, NULL);
+ clk = tegra_clk_register_plle("pll_e", "pll_e_mux", clk_base, pmc_base,
+ CLK_GET_RATE_NOCACHE, 100000000, &pll_e_params,
+ TEGRA_PLLE_CONFIGURE, pll_e_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_e", NULL);
+ clks[pll_e] = clk;
+}
+
+static const char *mux_audio_sync_clk[] = { "spdif_in_sync", "i2s0_sync",
+ "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync",};
+static const char *clk_out1_parents[] = { "clk_m", "clk_m_div2",
+ "clk_m_div4", "extern1", };
+static const char *clk_out2_parents[] = { "clk_m", "clk_m_div2",
+ "clk_m_div4", "extern2", };
+static const char *clk_out3_parents[] = { "clk_m", "clk_m_div2",
+ "clk_m_div4", "extern3", };
+
+static void __init tegra30_audio_clk_init(void)
+{
+ struct clk *clk;
+
+ /* spdif_in_sync */
+ clk = tegra_clk_register_sync_source("spdif_in_sync", 24000000,
+ 24000000);
+ clk_register_clkdev(clk, "spdif_in_sync", NULL);
+ clks[spdif_in_sync] = clk;
+
+ /* i2s0_sync */
+ clk = tegra_clk_register_sync_source("i2s0_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s0_sync", NULL);
+ clks[i2s0_sync] = clk;
+
+ /* i2s1_sync */
+ clk = tegra_clk_register_sync_source("i2s1_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s1_sync", NULL);
+ clks[i2s1_sync] = clk;
+
+ /* i2s2_sync */
+ clk = tegra_clk_register_sync_source("i2s2_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s2_sync", NULL);
+ clks[i2s2_sync] = clk;
+
+ /* i2s3_sync */
+ clk = tegra_clk_register_sync_source("i2s3_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s3_sync", NULL);
+ clks[i2s3_sync] = clk;
+
+ /* i2s4_sync */
+ clk = tegra_clk_register_sync_source("i2s4_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s4_sync", NULL);
+ clks[i2s4_sync] = clk;
+
+ /* vimclk_sync */
+ clk = tegra_clk_register_sync_source("vimclk_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "vimclk_sync", NULL);
+ clks[vimclk_sync] = clk;
+
+ /* audio0 */
+ clk = clk_register_mux(NULL, "audio0_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S0, 0, 3, 0, NULL);
+ clk = clk_register_gate(NULL, "audio0", "audio0_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S0, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio0", NULL);
+ clks[audio0] = clk;
+
+ /* audio1 */
+ clk = clk_register_mux(NULL, "audio1_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S1, 0, 3, 0, NULL);
+ clk = clk_register_gate(NULL, "audio1", "audio1_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S1, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio1", NULL);
+ clks[audio1] = clk;
+
+ /* audio2 */
+ clk = clk_register_mux(NULL, "audio2_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S2, 0, 3, 0, NULL);
+ clk = clk_register_gate(NULL, "audio2", "audio2_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S2, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio2", NULL);
+ clks[audio2] = clk;
+
+ /* audio3 */
+ clk = clk_register_mux(NULL, "audio3_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S3, 0, 3, 0, NULL);
+ clk = clk_register_gate(NULL, "audio3", "audio3_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S3, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio3", NULL);
+ clks[audio3] = clk;
+
+ /* audio4 */
+ clk = clk_register_mux(NULL, "audio4_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S4, 0, 3, 0, NULL);
+ clk = clk_register_gate(NULL, "audio4", "audio4_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S4, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio4", NULL);
+ clks[audio4] = clk;
+
+ /* spdif */
+ clk = clk_register_mux(NULL, "spdif_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_SPDIF, 0, 3, 0, NULL);
+ clk = clk_register_gate(NULL, "spdif", "spdif_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_SPDIF, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "spdif", NULL);
+ clks[spdif] = clk;
+
+ /* audio0_2x */
+ clk = clk_register_fixed_factor(NULL, "audio0_doubler", "audio0",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio0_div", "audio0_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 24, 1, 0,
+ &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio0_2x", "audio0_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 113, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio0_2x", NULL);
+ clks[audio0_2x] = clk;
+
+ /* audio1_2x */
+ clk = clk_register_fixed_factor(NULL, "audio1_doubler", "audio1",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio1_div", "audio1_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 25, 1, 0,
+ &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio1_2x", "audio1_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 114, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio1_2x", NULL);
+ clks[audio1_2x] = clk;
+
+ /* audio2_2x */
+ clk = clk_register_fixed_factor(NULL, "audio2_doubler", "audio2",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio2_div", "audio2_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 26, 1, 0,
+ &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio2_2x", "audio2_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 115, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio2_2x", NULL);
+ clks[audio2_2x] = clk;
+
+ /* audio3_2x */
+ clk = clk_register_fixed_factor(NULL, "audio3_doubler", "audio3",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio3_div", "audio3_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 27, 1, 0,
+ &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio3_2x", "audio3_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 116, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio3_2x", NULL);
+ clks[audio3_2x] = clk;
+
+ /* audio4_2x */
+ clk = clk_register_fixed_factor(NULL, "audio4_doubler", "audio4",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio4_div", "audio4_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 28, 1, 0,
+ &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio4_2x", "audio4_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 117, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio4_2x", NULL);
+ clks[audio4_2x] = clk;
+
+ /* spdif_2x */
+ clk = clk_register_fixed_factor(NULL, "spdif_doubler", "spdif",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("spdif_div", "spdif_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 29, 1, 0,
+ &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("spdif_2x", "spdif_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 118, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "spdif_2x", NULL);
+ clks[spdif_2x] = clk;
+}
+
+static void __init tegra30_pmc_clk_init(void)
+{
+ struct clk *clk;
+
+ /* clk_out_1 */
+ clk = clk_register_mux(NULL, "clk_out_1_mux", clk_out1_parents,
+ ARRAY_SIZE(clk_out1_parents), 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 6, 3, 0,
+ &clk_out_lock);
+ clks[clk_out_1_mux] = clk;
+ clk = clk_register_gate(NULL, "clk_out_1", "clk_out_1_mux", 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 2, 0,
+ &clk_out_lock);
+ clk_register_clkdev(clk, "extern1", "clk_out_1");
+ clks[clk_out_1] = clk;
+
+ /* clk_out_2 */
+ clk = clk_register_mux(NULL, "clk_out_2_mux", clk_out2_parents,
+ ARRAY_SIZE(clk_out1_parents), 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 14, 3, 0,
+ &clk_out_lock);
+ clk = clk_register_gate(NULL, "clk_out_2", "clk_out_2_mux", 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 10, 0,
+ &clk_out_lock);
+ clk_register_clkdev(clk, "extern2", "clk_out_2");
+ clks[clk_out_2] = clk;
+
+ /* clk_out_3 */
+ clk = clk_register_mux(NULL, "clk_out_3_mux", clk_out3_parents,
+ ARRAY_SIZE(clk_out1_parents), 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 22, 3, 0,
+ &clk_out_lock);
+ clk = clk_register_gate(NULL, "clk_out_3", "clk_out_3_mux", 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 18, 0,
+ &clk_out_lock);
+ clk_register_clkdev(clk, "extern3", "clk_out_3");
+ clks[clk_out_3] = clk;
+
+ /* blink */
+ writel_relaxed(0, pmc_base + PMC_BLINK_TIMER);
+ clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0,
+ pmc_base + PMC_DPD_PADS_ORIDE,
+ PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL);
+ clk = clk_register_gate(NULL, "blink", "blink_override", 0,
+ pmc_base + PMC_CTRL,
+ PMC_CTRL_BLINK_ENB, 0, NULL);
+ clk_register_clkdev(clk, "blink", NULL);
+ clks[blink] = clk;
+
+}
+
+const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
+ "pll_p_cclkg", "pll_p_out4_cclkg",
+ "pll_p_out3_cclkg", "unused", "pll_x" };
+const char *cclk_lp_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
+ "pll_p_cclklp", "pll_p_out4_cclklp",
+ "pll_p_out3_cclklp", "unused", "pll_x",
+ "pll_x_out0" };
+const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4",
+ "pll_p_out3", "pll_p_out2", "unused",
+ "clk_32k", "pll_m_out1" };
+
+static void __init tegra30_super_clk_init(void)
+{
+ struct clk *clk;
+
+ /*
+ * Clock input to cclk_g divided from pll_p using
+ * U71 divider of cclk_g.
+ */
+ clk = tegra_clk_register_divider("pll_p_cclkg", "pll_p",
+ clk_base + SUPER_CCLKG_DIVIDER, 0,
+ TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
+ clk_register_clkdev(clk, "pll_p_cclkg", NULL);
+
+ /*
+ * Clock input to cclk_g divided from pll_p_out3 using
+ * U71 divider of cclk_g.
+ */
+ clk = tegra_clk_register_divider("pll_p_out3_cclkg", "pll_p_out3",
+ clk_base + SUPER_CCLKG_DIVIDER, 0,
+ TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
+ clk_register_clkdev(clk, "pll_p_out3_cclkg", NULL);
+
+ /*
+ * Clock input to cclk_g divided from pll_p_out4 using
+ * U71 divider of cclk_g.
+ */
+ clk = tegra_clk_register_divider("pll_p_out4_cclkg", "pll_p_out4",
+ clk_base + SUPER_CCLKG_DIVIDER, 0,
+ TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
+ clk_register_clkdev(clk, "pll_p_out4_cclkg", NULL);
+
+ /* CCLKG */
+ clk = tegra_clk_register_super_mux("cclk_g", cclk_g_parents,
+ ARRAY_SIZE(cclk_g_parents),
+ CLK_SET_RATE_PARENT,
+ clk_base + CCLKG_BURST_POLICY,
+ 0, 4, 0, 0, NULL);
+ clk_register_clkdev(clk, "cclk_g", NULL);
+ clks[cclk_g] = clk;
+
+ /*
+ * Clock input to cclk_lp divided from pll_p using
+ * U71 divider of cclk_lp.
+ */
+ clk = tegra_clk_register_divider("pll_p_cclklp", "pll_p",
+ clk_base + SUPER_CCLKLP_DIVIDER, 0,
+ TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
+ clk_register_clkdev(clk, "pll_p_cclklp", NULL);
+
+ /*
+ * Clock input to cclk_lp divided from pll_p_out3 using
+ * U71 divider of cclk_lp.
+ */
+ clk = tegra_clk_register_divider("pll_p_out3_cclklp", "pll_p_out3",
+ clk_base + SUPER_CCLKG_DIVIDER, 0,
+ TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
+ clk_register_clkdev(clk, "pll_p_out3_cclklp", NULL);
+
+ /*
+ * Clock input to cclk_lp divided from pll_p_out4 using
+ * U71 divider of cclk_lp.
+ */
+ clk = tegra_clk_register_divider("pll_p_out4_cclklp", "pll_p_out4",
+ clk_base + SUPER_CCLKLP_DIVIDER, 0,
+ TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
+ clk_register_clkdev(clk, "pll_p_out4_cclklp", NULL);
+
+ /* CCLKLP */
+ clk = tegra_clk_register_super_mux("cclk_lp", cclk_lp_parents,
+ ARRAY_SIZE(cclk_lp_parents),
+ CLK_SET_RATE_PARENT,
+ clk_base + CCLKLP_BURST_POLICY,
+ TEGRA_DIVIDER_2, 4, 8, 9,
+ NULL);
+ clk_register_clkdev(clk, "cclk_lp", NULL);
+ clks[cclk_lp] = clk;
+
+ /* SCLK */
+ clk = tegra_clk_register_super_mux("sclk", sclk_parents,
+ ARRAY_SIZE(sclk_parents),
+ CLK_SET_RATE_PARENT,
+ clk_base + SCLK_BURST_POLICY,
+ 0, 4, 0, 0, NULL);
+ clk_register_clkdev(clk, "sclk", NULL);
+ clks[sclk] = clk;
+
+ /* HCLK */
+ clk = clk_register_divider(NULL, "hclk_div", "sclk", 0,
+ clk_base + SYSTEM_CLK_RATE, 4, 2, 0, NULL);
+ clk = clk_register_gate(NULL, "hclk", "hclk_div", CLK_SET_RATE_PARENT,
+ clk_base + SYSTEM_CLK_RATE, 7,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "hclk", NULL);
+ clks[hclk] = clk;
+
+ /* PCLK */
+ clk = clk_register_divider(NULL, "pclk_div", "hclk", 0,
+ clk_base + SYSTEM_CLK_RATE, 0, 2, 0, NULL);
+ clk = clk_register_gate(NULL, "pclk", "pclk_div", CLK_SET_RATE_PARENT,
+ clk_base + SYSTEM_CLK_RATE, 3,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "pclk", NULL);
+ clks[pclk] = clk;
+
+ /* twd */
+ clk = clk_register_fixed_factor(NULL, "twd", "cclk_g",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "twd", NULL);
+ clks[twd] = clk;
+}
+
+static const char *mux_pllacp_clkm[] = { "pll_a_out0", "unused", "pll_p",
+ "clk_m" };
+static const char *mux_pllpcm_clkm[] = { "pll_p", "pll_c", "pll_m", "clk_m" };
+static const char *mux_pllmcp_clkm[] = { "pll_m", "pll_c", "pll_p", "clk_m" };
+static const char *i2s0_parents[] = { "pll_a_out0", "audio0_2x", "pll_p",
+ "clk_m" };
+static const char *i2s1_parents[] = { "pll_a_out0", "audio1_2x", "pll_p",
+ "clk_m" };
+static const char *i2s2_parents[] = { "pll_a_out0", "audio2_2x", "pll_p",
+ "clk_m" };
+static const char *i2s3_parents[] = { "pll_a_out0", "audio3_2x", "pll_p",
+ "clk_m" };
+static const char *i2s4_parents[] = { "pll_a_out0", "audio4_2x", "pll_p",
+ "clk_m" };
+static const char *spdif_out_parents[] = { "pll_a_out0", "spdif_2x", "pll_p",
+ "clk_m" };
+static const char *spdif_in_parents[] = { "pll_p", "pll_c", "pll_m" };
+static const char *mux_pllpc_clk32k_clkm[] = { "pll_p", "pll_c", "clk_32k",
+ "clk_m" };
+static const char *mux_pllpc_clkm_clk32k[] = { "pll_p", "pll_c", "clk_m",
+ "clk_32k" };
+static const char *mux_pllmcpa[] = { "pll_m", "pll_c", "pll_p", "pll_a_out0" };
+static const char *mux_pllpdc_clkm[] = { "pll_p", "pll_d_out0", "pll_c",
+ "clk_m" };
+static const char *mux_pllp_clkm[] = { "pll_p", "unused", "unused", "clk_m" };
+static const char *mux_pllpmdacd2_clkm[] = { "pll_p", "pll_m", "pll_d_out0",
+ "pll_a_out0", "pll_c",
+ "pll_d2_out0", "clk_m" };
+static const char *mux_plla_clk32k_pllp_clkm_plle[] = { "pll_a_out0",
+ "clk_32k", "pll_p",
+ "clk_m", "pll_e" };
+static const char *mux_plld_out0_plld2_out0[] = { "pll_d_out0",
+ "pll_d2_out0" };
+
+static struct tegra_periph_init_data tegra_periph_clk_list[] = {
+ TEGRA_INIT_DATA_MUX("i2s0", NULL, "tegra30-i2s.0", i2s0_parents, CLK_SOURCE_I2S0, 30, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s0),
+ TEGRA_INIT_DATA_MUX("i2s1", NULL, "tegra30-i2s.1", i2s1_parents, CLK_SOURCE_I2S1, 11, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s1),
+ TEGRA_INIT_DATA_MUX("i2s2", NULL, "tegra30-i2s.2", i2s2_parents, CLK_SOURCE_I2S2, 18, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s2),
+ TEGRA_INIT_DATA_MUX("i2s3", NULL, "tegra30-i2s.3", i2s3_parents, CLK_SOURCE_I2S3, 101, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2s3),
+ TEGRA_INIT_DATA_MUX("i2s4", NULL, "tegra30-i2s.4", i2s4_parents, CLK_SOURCE_I2S4, 102, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2s4),
+ TEGRA_INIT_DATA_MUX("spdif_out", "spdif_out", "tegra30-spdif", spdif_out_parents, CLK_SOURCE_SPDIF_OUT, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_out),
+ TEGRA_INIT_DATA_MUX("spdif_in", "spdif_in", "tegra30-spdif", spdif_in_parents, CLK_SOURCE_SPDIF_IN, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_in),
+ TEGRA_INIT_DATA_MUX("d_audio", "d_audio", "tegra30-ahub", mux_pllacp_clkm, CLK_SOURCE_D_AUDIO, 106, &periph_v_regs, 0, d_audio),
+ TEGRA_INIT_DATA_MUX("dam0", NULL, "tegra30-dam.0", mux_pllacp_clkm, CLK_SOURCE_DAM0, 108, &periph_v_regs, 0, dam0),
+ TEGRA_INIT_DATA_MUX("dam1", NULL, "tegra30-dam.1", mux_pllacp_clkm, CLK_SOURCE_DAM1, 109, &periph_v_regs, 0, dam1),
+ TEGRA_INIT_DATA_MUX("dam2", NULL, "tegra30-dam.2", mux_pllacp_clkm, CLK_SOURCE_DAM2, 110, &periph_v_regs, 0, dam2),
+ TEGRA_INIT_DATA_MUX("hda", "hda", "tegra30-hda", mux_pllpcm_clkm, CLK_SOURCE_HDA, 125, &periph_v_regs, 0, hda),
+ TEGRA_INIT_DATA_MUX("hda2codec_2x", "hda2codec", "tegra30-hda", mux_pllpcm_clkm, CLK_SOURCE_HDA2CODEC_2X, 111, &periph_v_regs, 0, hda2codec_2x),
+ TEGRA_INIT_DATA_MUX("sbc1", NULL, "spi_tegra.0", mux_pllpcm_clkm, CLK_SOURCE_SBC1, 41, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc1),
+ TEGRA_INIT_DATA_MUX("sbc2", NULL, "spi_tegra.1", mux_pllpcm_clkm, CLK_SOURCE_SBC2, 44, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc2),
+ TEGRA_INIT_DATA_MUX("sbc3", NULL, "spi_tegra.2", mux_pllpcm_clkm, CLK_SOURCE_SBC3, 46, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc3),
+ TEGRA_INIT_DATA_MUX("sbc4", NULL, "spi_tegra.3", mux_pllpcm_clkm, CLK_SOURCE_SBC4, 68, &periph_u_regs, TEGRA_PERIPH_ON_APB, sbc4),
+ TEGRA_INIT_DATA_MUX("sbc5", NULL, "spi_tegra.4", mux_pllpcm_clkm, CLK_SOURCE_SBC5, 104, &periph_v_regs, TEGRA_PERIPH_ON_APB, sbc5),
+ TEGRA_INIT_DATA_MUX("sbc6", NULL, "spi_tegra.5", mux_pllpcm_clkm, CLK_SOURCE_SBC6, 105, &periph_v_regs, TEGRA_PERIPH_ON_APB, sbc6),
+ TEGRA_INIT_DATA_MUX("sata_oob", NULL, "tegra_sata_oob", mux_pllpcm_clkm, CLK_SOURCE_SATA_OOB, 123, &periph_v_regs, TEGRA_PERIPH_ON_APB, sata_oob),
+ TEGRA_INIT_DATA_MUX("sata", NULL, "tegra_sata", mux_pllpcm_clkm, CLK_SOURCE_SATA, 124, &periph_v_regs, TEGRA_PERIPH_ON_APB, sata),
+ TEGRA_INIT_DATA_MUX("ndflash", NULL, "tegra_nand", mux_pllpcm_clkm, CLK_SOURCE_NDFLASH, 13, &periph_l_regs, TEGRA_PERIPH_ON_APB, ndflash),
+ TEGRA_INIT_DATA_MUX("ndspeed", NULL, "tegra_nand_speed", mux_pllpcm_clkm, CLK_SOURCE_NDSPEED, 80, &periph_u_regs, TEGRA_PERIPH_ON_APB, ndspeed),
+ TEGRA_INIT_DATA_MUX("vfir", NULL, "vfir", mux_pllpcm_clkm, CLK_SOURCE_VFIR, 7, &periph_l_regs, TEGRA_PERIPH_ON_APB, vfir),
+ TEGRA_INIT_DATA_MUX("csite", NULL, "csite", mux_pllpcm_clkm, CLK_SOURCE_CSITE, 73, &periph_u_regs, TEGRA_PERIPH_ON_APB, csite),
+ TEGRA_INIT_DATA_MUX("la", NULL, "la", mux_pllpcm_clkm, CLK_SOURCE_LA, 76, &periph_u_regs, TEGRA_PERIPH_ON_APB, la),
+ TEGRA_INIT_DATA_MUX("owr", NULL, "tegra_w1", mux_pllpcm_clkm, CLK_SOURCE_OWR, 71, &periph_u_regs, TEGRA_PERIPH_ON_APB, owr),
+ TEGRA_INIT_DATA_MUX("mipi", NULL, "mipi", mux_pllpcm_clkm, CLK_SOURCE_MIPI, 50, &periph_h_regs, TEGRA_PERIPH_ON_APB, mipi),
+ TEGRA_INIT_DATA_MUX("tsensor", NULL, "tegra-tsensor", mux_pllpc_clkm_clk32k, CLK_SOURCE_TSENSOR, 100, &periph_v_regs, TEGRA_PERIPH_ON_APB, tsensor),
+ TEGRA_INIT_DATA_MUX("i2cslow", NULL, "i2cslow", mux_pllpc_clk32k_clkm, CLK_SOURCE_I2CSLOW, 81, &periph_u_regs, TEGRA_PERIPH_ON_APB, i2cslow),
+ TEGRA_INIT_DATA_INT("vde", NULL, "vde", mux_pllpcm_clkm, CLK_SOURCE_VDE, 61, &periph_h_regs, 0, vde),
+ TEGRA_INIT_DATA_INT("vi", "vi", "tegra_camera", mux_pllmcpa, CLK_SOURCE_VI, 20, &periph_l_regs, 0, vi),
+ TEGRA_INIT_DATA_INT("epp", NULL, "epp", mux_pllmcpa, CLK_SOURCE_EPP, 19, &periph_l_regs, 0, epp),
+ TEGRA_INIT_DATA_INT("mpe", NULL, "mpe", mux_pllmcpa, CLK_SOURCE_MPE, 60, &periph_h_regs, 0, mpe),
+ TEGRA_INIT_DATA_INT("host1x", NULL, "host1x", mux_pllmcpa, CLK_SOURCE_HOST1X, 28, &periph_l_regs, 0, host1x),
+ TEGRA_INIT_DATA_INT("3d", NULL, "3d", mux_pllmcpa, CLK_SOURCE_3D, 24, &periph_l_regs, TEGRA_PERIPH_MANUAL_RESET, gr3d),
+ TEGRA_INIT_DATA_INT("3d2", NULL, "3d2", mux_pllmcpa, CLK_SOURCE_3D2, 98, &periph_v_regs, TEGRA_PERIPH_MANUAL_RESET, gr3d2),
+ TEGRA_INIT_DATA_INT("2d", NULL, "2d", mux_pllmcpa, CLK_SOURCE_2D, 21, &periph_l_regs, 0, gr2d),
+ TEGRA_INIT_DATA_INT("se", NULL, "se", mux_pllpcm_clkm, CLK_SOURCE_SE, 127, &periph_v_regs, 0, se),
+ TEGRA_INIT_DATA_MUX("mselect", NULL, "mselect", mux_pllp_clkm, CLK_SOURCE_MSELECT, 99, &periph_v_regs, 0, mselect),
+ TEGRA_INIT_DATA_MUX("nor", NULL, "tegra-nor", mux_pllpcm_clkm, CLK_SOURCE_NOR, 42, &periph_h_regs, 0, nor),
+ TEGRA_INIT_DATA_MUX("sdmmc1", NULL, "sdhci-tegra.0", mux_pllpcm_clkm, CLK_SOURCE_SDMMC1, 14, &periph_l_regs, 0, sdmmc1),
+ TEGRA_INIT_DATA_MUX("sdmmc2", NULL, "sdhci-tegra.1", mux_pllpcm_clkm, CLK_SOURCE_SDMMC2, 9, &periph_l_regs, 0, sdmmc2),
+ TEGRA_INIT_DATA_MUX("sdmmc3", NULL, "sdhci-tegra.2", mux_pllpcm_clkm, CLK_SOURCE_SDMMC3, 69, &periph_u_regs, 0, sdmmc3),
+ TEGRA_INIT_DATA_MUX("sdmmc4", NULL, "sdhci-tegra.3", mux_pllpcm_clkm, CLK_SOURCE_SDMMC4, 15, &periph_l_regs, 0, sdmmc4),
+ TEGRA_INIT_DATA_MUX("cve", NULL, "cve", mux_pllpdc_clkm, CLK_SOURCE_CVE, 49, &periph_h_regs, 0, cve),
+ TEGRA_INIT_DATA_MUX("tvo", NULL, "tvo", mux_pllpdc_clkm, CLK_SOURCE_TVO, 49, &periph_h_regs, 0, tvo),
+ TEGRA_INIT_DATA_MUX("tvdac", NULL, "tvdac", mux_pllpdc_clkm, CLK_SOURCE_TVDAC, 53, &periph_h_regs, 0, tvdac),
+ TEGRA_INIT_DATA_MUX("actmon", NULL, "actmon", mux_pllpc_clk32k_clkm, CLK_SOURCE_ACTMON, 119, &periph_v_regs, 0, actmon),
+ TEGRA_INIT_DATA_MUX("vi_sensor", "vi_sensor", "tegra_camera", mux_pllmcpa, CLK_SOURCE_VI_SENSOR, 20, &periph_l_regs, TEGRA_PERIPH_NO_RESET, vi_sensor),
+ TEGRA_INIT_DATA_DIV16("i2c1", "div-clk", "tegra-i2c.0", mux_pllp_clkm, CLK_SOURCE_I2C1, 12, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2c1),
+ TEGRA_INIT_DATA_DIV16("i2c2", "div-clk", "tegra-i2c.1", mux_pllp_clkm, CLK_SOURCE_I2C2, 54, &periph_h_regs, TEGRA_PERIPH_ON_APB, i2c2),
+ TEGRA_INIT_DATA_DIV16("i2c3", "div-clk", "tegra-i2c.2", mux_pllp_clkm, CLK_SOURCE_I2C3, 67, &periph_u_regs, TEGRA_PERIPH_ON_APB, i2c3),
+ TEGRA_INIT_DATA_DIV16("i2c4", "div-clk", "tegra-i2c.3", mux_pllp_clkm, CLK_SOURCE_I2C4, 103, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2c4),
+ TEGRA_INIT_DATA_DIV16("i2c5", "div-clk", "tegra-i2c.4", mux_pllp_clkm, CLK_SOURCE_I2C5, 47, &periph_h_regs, TEGRA_PERIPH_ON_APB, i2c5),
+ TEGRA_INIT_DATA_UART("uarta", NULL, "tegra_uart.0", mux_pllpcm_clkm, CLK_SOURCE_UARTA, 6, &periph_l_regs, uarta),
+ TEGRA_INIT_DATA_UART("uartb", NULL, "tegra_uart.1", mux_pllpcm_clkm, CLK_SOURCE_UARTB, 7, &periph_l_regs, uartb),
+ TEGRA_INIT_DATA_UART("uartc", NULL, "tegra_uart.2", mux_pllpcm_clkm, CLK_SOURCE_UARTC, 55, &periph_h_regs, uartc),
+ TEGRA_INIT_DATA_UART("uartd", NULL, "tegra_uart.3", mux_pllpcm_clkm, CLK_SOURCE_UARTD, 65, &periph_u_regs, uartd),
+ TEGRA_INIT_DATA_UART("uarte", NULL, "tegra_uart.4", mux_pllpcm_clkm, CLK_SOURCE_UARTE, 66, &periph_u_regs, uarte),
+ TEGRA_INIT_DATA_MUX8("hdmi", NULL, "hdmi", mux_pllpmdacd2_clkm, CLK_SOURCE_HDMI, 51, &periph_h_regs, 0, hdmi),
+ TEGRA_INIT_DATA_MUX8("extern1", NULL, "extern1", mux_plla_clk32k_pllp_clkm_plle, CLK_SOURCE_EXTERN1, 120, &periph_v_regs, 0, extern1),
+ TEGRA_INIT_DATA_MUX8("extern2", NULL, "extern2", mux_plla_clk32k_pllp_clkm_plle, CLK_SOURCE_EXTERN2, 121, &periph_v_regs, 0, extern2),
+ TEGRA_INIT_DATA_MUX8("extern3", NULL, "extern3", mux_plla_clk32k_pllp_clkm_plle, CLK_SOURCE_EXTERN3, 122, &periph_v_regs, 0, extern3),
+ TEGRA_INIT_DATA("pwm", NULL, "pwm", mux_pllpc_clk32k_clkm, CLK_SOURCE_PWM, 28, 2, 0, 0, 8, 1, 0, &periph_l_regs, 17, periph_clk_enb_refcnt, 0, pwm),
+};
+
+static struct tegra_periph_init_data tegra_periph_nodiv_clk_list[] = {
+ TEGRA_INIT_DATA_NODIV("disp1", NULL, "tegradc.0", mux_pllpmdacd2_clkm, CLK_SOURCE_DISP1, 29, 3, 27, &periph_l_regs, 0, disp1),
+ TEGRA_INIT_DATA_NODIV("disp2", NULL, "tegradc.1", mux_pllpmdacd2_clkm, CLK_SOURCE_DISP2, 29, 3, 26, &periph_l_regs, 0, disp2),
+ TEGRA_INIT_DATA_NODIV("dsib", NULL, "tegradc.1", mux_plld_out0_plld2_out0, CLK_SOURCE_DSIB, 25, 1, 82, &periph_u_regs, 0, dsib),
+};
+
+static void __init tegra30_periph_clk_init(void)
+{
+ struct tegra_periph_init_data *data;
+ struct clk *clk;
+ int i;
+
+ /* apbdma */
+ clk = tegra_clk_register_periph_gate("apbdma", "clk_m", 0, clk_base, 0, 34,
+ &periph_h_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "tegra-apbdma");
+ clks[apbdma] = clk;
+
+ /* rtc */
+ clk = tegra_clk_register_periph_gate("rtc", "clk_32k",
+ TEGRA_PERIPH_NO_RESET | TEGRA_PERIPH_ON_APB,
+ clk_base, 0, 4, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "rtc-tegra");
+ clks[rtc] = clk;
+
+ /* timer */
+ clk = tegra_clk_register_periph_gate("timer", "clk_m", 0, clk_base, 0,
+ 5, &periph_l_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "timer");
+ clks[timer] = clk;
+
+ /* kbc */
+ clk = tegra_clk_register_periph_gate("kbc", "clk_32k",
+ TEGRA_PERIPH_NO_RESET | TEGRA_PERIPH_ON_APB,
+ clk_base, 0, 36, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "tegra-kbc");
+ clks[kbc] = clk;
+
+ /* csus */
+ clk = tegra_clk_register_periph_gate("csus", "clk_m",
+ TEGRA_PERIPH_NO_RESET | TEGRA_PERIPH_ON_APB,
+ clk_base, 0, 92, &periph_u_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "csus", "tengra_camera");
+ clks[csus] = clk;
+
+ /* vcp */
+ clk = tegra_clk_register_periph_gate("vcp", "clk_m", 0, clk_base, 0, 29,
+ &periph_l_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "vcp", "tegra-avp");
+ clks[vcp] = clk;
+
+ /* bsea */
+ clk = tegra_clk_register_periph_gate("bsea", "clk_m", 0, clk_base, 0,
+ 62, &periph_h_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "bsea", "tegra-avp");
+ clks[bsea] = clk;
+
+ /* bsev */
+ clk = tegra_clk_register_periph_gate("bsev", "clk_m", 0, clk_base, 0,
+ 63, &periph_h_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "bsev", "tegra-aes");
+ clks[bsev] = clk;
+
+ /* usbd */
+ clk = tegra_clk_register_periph_gate("usbd", "clk_m", 0, clk_base, 0,
+ 22, &periph_l_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "fsl-tegra-udc");
+ clks[usbd] = clk;
+
+ /* usb2 */
+ clk = tegra_clk_register_periph_gate("usb2", "clk_m", 0, clk_base, 0,
+ 58, &periph_h_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "tegra-ehci.1");
+ clks[usb2] = clk;
+
+ /* usb3 */
+ clk = tegra_clk_register_periph_gate("usb3", "clk_m", 0, clk_base, 0,
+ 59, &periph_h_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "tegra-ehci.2");
+ clks[usb3] = clk;
+
+ /* dsia */
+ clk = tegra_clk_register_periph_gate("dsia", "pll_d_out0", 0, clk_base,
+ 0, 48, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "dsia", "tegradc.0");
+ clks[dsia] = clk;
+
+ /* csi */
+ clk = tegra_clk_register_periph_gate("csi", "pll_p_out3", 0, clk_base,
+ 0, 52, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "csi", "tegra_camera");
+ clks[csi] = clk;
+
+ /* isp */
+ clk = tegra_clk_register_periph_gate("isp", "clk_m", 0, clk_base, 0, 23,
+ &periph_l_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "isp", "tegra_camera");
+ clks[isp] = clk;
+
+ /* pcie */
+ clk = tegra_clk_register_periph_gate("pcie", "clk_m", 0, clk_base, 0,
+ 70, &periph_u_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "pcie", "tegra-pcie");
+ clks[pcie] = clk;
+
+ /* afi */
+ clk = tegra_clk_register_periph_gate("afi", "clk_m", 0, clk_base, 0, 72,
+ &periph_u_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "afi", "tegra-pcie");
+ clks[afi] = clk;
+
+ /* kfuse */
+ clk = tegra_clk_register_periph_gate("kfuse", "clk_m",
+ TEGRA_PERIPH_ON_APB,
+ clk_base, 0, 40, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "kfuse-tegra");
+ clks[kfuse] = clk;
+
+ /* fuse */
+ clk = tegra_clk_register_periph_gate("fuse", "clk_m",
+ TEGRA_PERIPH_ON_APB,
+ clk_base, 0, 39, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "fuse", "fuse-tegra");
+ clks[fuse] = clk;
+
+ /* fuse_burn */
+ clk = tegra_clk_register_periph_gate("fuse_burn", "clk_m",
+ TEGRA_PERIPH_ON_APB,
+ clk_base, 0, 39, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "fuse_burn", "fuse-tegra");
+ clks[fuse_burn] = clk;
+
+ /* apbif */
+ clk = tegra_clk_register_periph_gate("apbif", "clk_m", 0,
+ clk_base, 0, 107, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "apbif", "tegra30-ahub");
+ clks[apbif] = clk;
+
+ /* hda2hdmi */
+ clk = tegra_clk_register_periph_gate("hda2hdmi", "clk_m",
+ TEGRA_PERIPH_ON_APB,
+ clk_base, 0, 128, &periph_w_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "hda2hdmi", "tegra30-hda");
+ clks[hda2hdmi] = clk;
+
+ /* sata_cold */
+ clk = tegra_clk_register_periph_gate("sata_cold", "clk_m",
+ TEGRA_PERIPH_ON_APB,
+ clk_base, 0, 129, &periph_w_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "tegra_sata_cold");
+ clks[sata_cold] = clk;
+
+ /* dtv */
+ clk = tegra_clk_register_periph_gate("dtv", "clk_m",
+ TEGRA_PERIPH_ON_APB,
+ clk_base, 0, 79, &periph_u_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "dtv");
+ clks[dtv] = clk;
+
+ /* emc */
+ clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm,
+ ARRAY_SIZE(mux_pllmcp_clkm), 0,
+ clk_base + CLK_SOURCE_EMC,
+ 30, 2, 0, NULL);
+ clk = tegra_clk_register_periph_gate("emc", "emc_mux", 0, clk_base, 0,
+ 57, &periph_h_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "emc", NULL);
+ clks[emc] = clk;
+
+ /* i2c1-fast */
+ clk = clk_register_fixed_factor(NULL, "i2c1-fast", "pll_p_out3",
+ CLK_SET_RATE_PARENT, 1, 1);
+ clk_register_clkdev(clk, "fast-clk", "tegra-i2c.0");
+
+ /* i2c2-fast */
+ clk = clk_register_fixed_factor(NULL, "i2c2-fast", "pll_p_out3",
+ CLK_SET_RATE_PARENT, 1, 1);
+ clk_register_clkdev(clk, "fast-clk", "tegra-i2c.1");
+
+ /* i2c3-fast */
+ clk = clk_register_fixed_factor(NULL, "i2c3-fast", "pll_p_out3",
+ CLK_SET_RATE_PARENT, 1, 1);
+ clk_register_clkdev(clk, "fast-clk", "tegra-i2c.2");
+
+ /* i2c4-fast */
+ clk = clk_register_fixed_factor(NULL, "i2c4-fast", "pll_p_out3",
+ CLK_SET_RATE_PARENT, 1, 1);
+ clk_register_clkdev(clk, "fast-clk", "tegra-i2c.3");
+
+ /* i2c5-fast */
+ clk = clk_register_fixed_factor(NULL, "i2c5-fast", "pll_p_out3",
+ CLK_SET_RATE_PARENT, 1, 1);
+ clk_register_clkdev(clk, "fast-clk", "tegra-i2c.5");
+
+ /* dsi1-fixed */
+ clk = clk_register_fixed_factor(NULL, "dsi1-fixed", "pll_p_out3",
+ CLK_SET_RATE_PARENT, 1, 1);
+ clk_register_clkdev(clk, "dsi-fixed", "tegradc.0");
+
+ /* dsi2-fixed */
+ clk = clk_register_fixed_factor(NULL, "dsi2-fixed", "pll_p_out3",
+ CLK_SET_RATE_PARENT, 1, 1);
+ clk_register_clkdev(clk, "dsi-fixed", "tegradc.1");
+
+ for (i = 0; i < ARRAY_SIZE(tegra_periph_clk_list); i++) {
+ data = &tegra_periph_clk_list[i];
+ clk = tegra_clk_register_periph(data->name, data->parent_names,
+ data->num_parents, &data->periph,
+ clk_base, data->offset);
+ clk_register_clkdev(clk, data->con_id, data->dev_id);
+ clks[data->clk_id] = clk;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(tegra_periph_nodiv_clk_list); i++) {
+ data = &tegra_periph_nodiv_clk_list[i];
+ clk = tegra_clk_register_periph_nodiv(data->name,
+ data->parent_names,
+ data->num_parents, &data->periph,
+ clk_base, data->offset);
+ clk_register_clkdev(clk, data->con_id, data->dev_id);
+ clks[data->clk_id] = clk;
+ }
+}
+
+static void __init tegra30_fixed_clk_init(void)
+{
+ struct clk *clk;
+
+ /* clk_32k */
+ clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, CLK_IS_ROOT,
+ 32768);
+ clk_register_clkdev(clk, "clk_32k", NULL);
+ clks[clk_32k] = clk;
+
+ /* clk_m_div2 */
+ clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "clk_m_div2", NULL);
+ clks[clk_m_div2] = clk;
+
+ /* clk_m_div4 */
+ clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m",
+ CLK_SET_RATE_PARENT, 1, 4);
+ clk_register_clkdev(clk, "clk_m_div4", NULL);
+ clks[clk_m_div4] = clk;
+
+ /* cml0 */
+ clk = clk_register_gate(NULL, "cml0", "pll_e", 0, clk_base + PLLE_AUX,
+ 0, 0, &cml_lock);
+ clk_register_clkdev(clk, "cml0", NULL);
+ clks[cml0] = clk;
+
+ /* cml1 */
+ clk = clk_register_gate(NULL, "cml1", "pll_e", 0, clk_base + PLLE_AUX,
+ 1, 0, &cml_lock);
+ clk_register_clkdev(clk, "cml1", NULL);
+ clks[cml1] = clk;
+
+ /* pciex */
+ clk = clk_register_fixed_rate(NULL, "pciex", "pll_e", 0, 100000000);
+ clk_register_clkdev(clk, "pciex", NULL);
+ clks[pciex] = clk;
+}
+
+static void __init tegra30_osc_clk_init(void)
+{
+ struct clk *clk;
+ unsigned int pll_ref_div;
+
+ tegra30_clk_measure_input_freq();
+
+ /* clk_m */
+ clk = clk_register_fixed_rate(NULL, "clk_m", NULL, CLK_IS_ROOT,
+ input_freq);
+ clk_register_clkdev(clk, "clk_m", NULL);
+ clks[clk_m] = clk;
+
+ /* pll_ref */
+ pll_ref_div = tegra30_get_pll_ref_div();
+ clk = clk_register_fixed_factor(NULL, "pll_ref", "clk_m",
+ CLK_SET_RATE_PARENT, 1, pll_ref_div);
+ clk_register_clkdev(clk, "pll_ref", NULL);
+ clks[pll_ref] = clk;
+}
+
+/* Tegra30 CPU clock and reset control functions */
+static void tegra30_wait_cpu_in_reset(u32 cpu)
+{
+ unsigned int reg;
+
+ do {
+ reg = readl(clk_base +
+ TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS);
+ cpu_relax();
+ } while (!(reg & (1 << cpu))); /* check CPU been reset or not */
+
+ return;
+}
+
+static void tegra30_put_cpu_in_reset(u32 cpu)
+{
+ writel(CPU_RESET(cpu),
+ clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
+ dmb();
+}
+
+static void tegra30_cpu_out_of_reset(u32 cpu)
+{
+ writel(CPU_RESET(cpu),
+ clk_base + TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
+ wmb();
+}
+
+
+static void tegra30_enable_cpu_clock(u32 cpu)
+{
+ unsigned int reg;
+
+ writel(CPU_CLOCK(cpu),
+ clk_base + TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
+ reg = readl(clk_base +
+ TEGRA30_CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
+}
+
+static void tegra30_disable_cpu_clock(u32 cpu)
+{
+
+ unsigned int reg;
+
+ reg = readl(clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+ writel(reg | CPU_CLOCK(cpu),
+ clk_base + TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static bool tegra30_cpu_rail_off_ready(void)
+{
+ unsigned int cpu_rst_status;
+ int cpu_pwr_status;
+
+ cpu_rst_status = readl(clk_base +
+ TEGRA30_CLK_RST_CONTROLLER_CPU_CMPLX_STATUS);
+ cpu_pwr_status = tegra_powergate_is_powered(TEGRA_POWERGATE_CPU1) ||
+ tegra_powergate_is_powered(TEGRA_POWERGATE_CPU2) ||
+ tegra_powergate_is_powered(TEGRA_POWERGATE_CPU3);
+
+ if (((cpu_rst_status & 0xE) != 0xE) || cpu_pwr_status)
+ return false;
+
+ return true;
+}
+
+static void tegra30_cpu_clock_suspend(void)
+{
+ /* switch coresite to clk_m, save off original source */
+ tegra30_cpu_clk_sctx.clk_csite_src =
+ readl(clk_base + CLK_RESET_SOURCE_CSITE);
+ writel(3<<30, clk_base + CLK_RESET_SOURCE_CSITE);
+
+ tegra30_cpu_clk_sctx.cpu_burst =
+ readl(clk_base + CLK_RESET_CCLK_BURST);
+ tegra30_cpu_clk_sctx.pllx_base =
+ readl(clk_base + CLK_RESET_PLLX_BASE);
+ tegra30_cpu_clk_sctx.pllx_misc =
+ readl(clk_base + CLK_RESET_PLLX_MISC);
+ tegra30_cpu_clk_sctx.cclk_divider =
+ readl(clk_base + CLK_RESET_CCLK_DIVIDER);
+}
+
+static void tegra30_cpu_clock_resume(void)
+{
+ unsigned int reg, policy;
+
+ /* Is CPU complex already running on PLLX? */
+ reg = readl(clk_base + CLK_RESET_CCLK_BURST);
+ policy = (reg >> CLK_RESET_CCLK_BURST_POLICY_SHIFT) & 0xF;
+
+ if (policy == CLK_RESET_CCLK_IDLE_POLICY)
+ reg = (reg >> CLK_RESET_CCLK_IDLE_POLICY_SHIFT) & 0xF;
+ else if (policy == CLK_RESET_CCLK_RUN_POLICY)
+ reg = (reg >> CLK_RESET_CCLK_RUN_POLICY_SHIFT) & 0xF;
+ else
+ BUG();
+
+ if (reg != CLK_RESET_CCLK_BURST_POLICY_PLLX) {
+ /* restore PLLX settings if CPU is on different PLL */
+ writel(tegra30_cpu_clk_sctx.pllx_misc,
+ clk_base + CLK_RESET_PLLX_MISC);
+ writel(tegra30_cpu_clk_sctx.pllx_base,
+ clk_base + CLK_RESET_PLLX_BASE);
+
+ /* wait for PLL stabilization if PLLX was enabled */
+ if (tegra30_cpu_clk_sctx.pllx_base & (1 << 30))
+ udelay(300);
+ }
+
+ /*
+ * Restore original burst policy setting for calls resulting from CPU
+ * LP2 in idle or system suspend.
+ */
+ writel(tegra30_cpu_clk_sctx.cclk_divider,
+ clk_base + CLK_RESET_CCLK_DIVIDER);
+ writel(tegra30_cpu_clk_sctx.cpu_burst,
+ clk_base + CLK_RESET_CCLK_BURST);
+
+ writel(tegra30_cpu_clk_sctx.clk_csite_src,
+ clk_base + CLK_RESET_SOURCE_CSITE);
+}
+#endif
+
+static struct tegra_cpu_car_ops tegra30_cpu_car_ops = {
+ .wait_for_reset = tegra30_wait_cpu_in_reset,
+ .put_in_reset = tegra30_put_cpu_in_reset,
+ .out_of_reset = tegra30_cpu_out_of_reset,
+ .enable_clock = tegra30_enable_cpu_clock,
+ .disable_clock = tegra30_disable_cpu_clock,
+#ifdef CONFIG_PM_SLEEP
+ .rail_off_ready = tegra30_cpu_rail_off_ready,
+ .suspend = tegra30_cpu_clock_suspend,
+ .resume = tegra30_cpu_clock_resume,
+#endif
+};
+
+static __initdata struct tegra_clk_init_table init_table[] = {
+ {uarta, pll_p, 408000000, 1},
+ {pll_a, clk_max, 564480000, 1},
+ {pll_a_out0, clk_max, 11289600, 1},
+ {extern1, pll_a_out0, 0, 1},
+ {clk_out_1_mux, extern1, 0, 0},
+ {clk_out_1, clk_max, 0, 1},
+ {blink, clk_max, 0, 1},
+ {i2s0, pll_a_out0, 11289600, 0},
+ {i2s1, pll_a_out0, 11289600, 0},
+ {i2s2, pll_a_out0, 11289600, 0},
+ {i2s3, pll_a_out0, 11289600, 0},
+ {i2s4, pll_a_out0, 11289600, 0},
+ {sdmmc1, pll_p, 48000000, 0},
+ {sdmmc2, pll_p, 48000000, 0},
+ {sdmmc3, pll_p, 48000000, 0},
+ {pll_m, clk_max, 0, 1},
+ {pclk, clk_max, 0, 1},
+ {csite, clk_max, 0, 1},
+ {emc, clk_max, 0, 1},
+ {mselect, clk_max, 0, 1},
+ {sbc1, pll_p, 100000000, 0},
+ {sbc2, pll_p, 100000000, 0},
+ {sbc3, pll_p, 100000000, 0},
+ {sbc4, pll_p, 100000000, 0},
+ {sbc5, pll_p, 100000000, 0},
+ {sbc6, pll_p, 100000000, 0},
+ {host1x, pll_c, 150000000, 0},
+ {disp1, pll_p, 600000000, 0},
+ {disp2, pll_p, 600000000, 0},
+ {twd, clk_max, 0, 1},
+ {clk_max, clk_max, 0, 0}, /* This MUST be the last entry. */
+};
+
+/*
+ * Some clocks may be used by different drivers depending on the board
+ * configuration. List those here to register them twice in the clock lookup
+ * table under two names.
+ */
+static struct tegra_clk_duplicate tegra_clk_duplicates[] = {
+ TEGRA_CLK_DUPLICATE(uarta, "serial8250.0", NULL),
+ TEGRA_CLK_DUPLICATE(uartb, "serial8250.1", NULL),
+ TEGRA_CLK_DUPLICATE(uartc, "serial8250.2", NULL),
+ TEGRA_CLK_DUPLICATE(uartd, "serial8250.3", NULL),
+ TEGRA_CLK_DUPLICATE(uarte, "serial8250.4", NULL),
+ TEGRA_CLK_DUPLICATE(usbd, "utmip-pad", NULL),
+ TEGRA_CLK_DUPLICATE(usbd, "tegra-ehci.0", NULL),
+ TEGRA_CLK_DUPLICATE(usbd, "tegra-otg", NULL),
+ TEGRA_CLK_DUPLICATE(pll_p, "tegradc.0", "parent"),
+ TEGRA_CLK_DUPLICATE(pll_p, "tegradc.1", "parent"),
+ TEGRA_CLK_DUPLICATE(pll_d2_out0, "hdmi", "parent"),
+ TEGRA_CLK_DUPLICATE(dsib, "tegradc.0", "dsib"),
+ TEGRA_CLK_DUPLICATE(dsia, "tegradc.1", "dsia"),
+ TEGRA_CLK_DUPLICATE(bsev, "tegra-avp", "bsev"),
+ TEGRA_CLK_DUPLICATE(bsev, "nvavp", "bsev"),
+ TEGRA_CLK_DUPLICATE(vde, "tegra-aes", "vde"),
+ TEGRA_CLK_DUPLICATE(bsea, "tegra-aes", "bsea"),
+ TEGRA_CLK_DUPLICATE(bsea, "nvavp", "bsea"),
+ TEGRA_CLK_DUPLICATE(cml1, "tegra_sata_cml", NULL),
+ TEGRA_CLK_DUPLICATE(cml0, "tegra_pcie", "cml"),
+ TEGRA_CLK_DUPLICATE(pciex, "tegra_pcie", "pciex"),
+ TEGRA_CLK_DUPLICATE(i2c1, "tegra-i2c-slave.0", NULL),
+ TEGRA_CLK_DUPLICATE(i2c2, "tegra-i2c-slave.1", NULL),
+ TEGRA_CLK_DUPLICATE(i2c3, "tegra-i2c-slave.2", NULL),
+ TEGRA_CLK_DUPLICATE(i2c4, "tegra-i2c-slave.3", NULL),
+ TEGRA_CLK_DUPLICATE(i2c5, "tegra-i2c-slave.4", NULL),
+ TEGRA_CLK_DUPLICATE(sbc1, "spi_slave_tegra.0", NULL),
+ TEGRA_CLK_DUPLICATE(sbc2, "spi_slave_tegra.1", NULL),
+ TEGRA_CLK_DUPLICATE(sbc3, "spi_slave_tegra.2", NULL),
+ TEGRA_CLK_DUPLICATE(sbc4, "spi_slave_tegra.3", NULL),
+ TEGRA_CLK_DUPLICATE(sbc5, "spi_slave_tegra.4", NULL),
+ TEGRA_CLK_DUPLICATE(sbc6, "spi_slave_tegra.5", NULL),
+ TEGRA_CLK_DUPLICATE(twd, "smp_twd", NULL),
+ TEGRA_CLK_DUPLICATE(vcp, "nvavp", "vcp"),
+ TEGRA_CLK_DUPLICATE(i2s0, NULL, "i2s0"),
+ TEGRA_CLK_DUPLICATE(i2s1, NULL, "i2s1"),
+ TEGRA_CLK_DUPLICATE(i2s2, NULL, "i2s2"),
+ TEGRA_CLK_DUPLICATE(i2s3, NULL, "i2s3"),
+ TEGRA_CLK_DUPLICATE(i2s4, NULL, "i2s4"),
+ TEGRA_CLK_DUPLICATE(dam0, NULL, "dam0"),
+ TEGRA_CLK_DUPLICATE(dam1, NULL, "dam1"),
+ TEGRA_CLK_DUPLICATE(dam2, NULL, "dam2"),
+ TEGRA_CLK_DUPLICATE(spdif_in, NULL, "spdif_in"),
+ TEGRA_CLK_DUPLICATE(pll_p_out3, "tegra-i2c.0", "fast-clk"),
+ TEGRA_CLK_DUPLICATE(pll_p_out3, "tegra-i2c.1", "fast-clk"),
+ TEGRA_CLK_DUPLICATE(pll_p_out3, "tegra-i2c.2", "fast-clk"),
+ TEGRA_CLK_DUPLICATE(pll_p_out3, "tegra-i2c.3", "fast-clk"),
+ TEGRA_CLK_DUPLICATE(pll_p_out3, "tegra-i2c.4", "fast-clk"),
+ TEGRA_CLK_DUPLICATE(clk_max, NULL, NULL), /* MUST be the last entry */
+};
+
+static const struct of_device_id pmc_match[] __initconst = {
+ { .compatible = "nvidia,tegra30-pmc" },
+ {},
+};
+
+void __init tegra30_clock_init(struct device_node *np)
+{
+ struct device_node *node;
+ int i;
+
+ clk_base = of_iomap(np, 0);
+ if (!clk_base) {
+ pr_err("ioremap tegra30 CAR failed\n");
+ return;
+ }
+
+ node = of_find_matching_node(NULL, pmc_match);
+ if (!node) {
+ pr_err("Failed to find pmc node\n");
+ BUG();
+ }
+
+ pmc_base = of_iomap(node, 0);
+ if (!pmc_base) {
+ pr_err("Can't map pmc registers\n");
+ BUG();
+ }
+
+ tegra30_osc_clk_init();
+ tegra30_fixed_clk_init();
+ tegra30_pll_init();
+ tegra30_super_clk_init();
+ tegra30_periph_clk_init();
+ tegra30_audio_clk_init();
+ tegra30_pmc_clk_init();
+
+ for (i = 0; i < ARRAY_SIZE(clks); i++) {
+ if (IS_ERR(clks[i])) {
+ pr_err("Tegra30 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clks[i]));
+ BUG();
+ }
+ if (!clks[i])
+ clks[i] = ERR_PTR(-EINVAL);
+ }
+
+ tegra_init_dup_clks(tegra_clk_duplicates, clks, clk_max);
+
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ tegra_init_from_table(init_table, clks, clk_max);
+
+ tegra_cpu_car_ops = &tegra30_cpu_car_ops;
+}
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 82835f2..0744731 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -493,4 +493,10 @@ void tegra20_clock_init(struct device_node *np);
static inline void tegra20_clock_init(struct device_node *np) {}
#endif /* CONFIG_ARCH_TEGRA_2x_SOC */
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+void tegra30_clock_init(struct device_node *np);
+#else
+static inline void tegra30_clock_init(struct device_node *np) {}
+#endif /* CONFIG_ARCH_TEGRA_3x_SOC */
+
#endif /* TEGRA_CLK_H */
--
1.7.10.4
^ permalink raw reply related
* [PATCH] OMAP: omap4-panda: add WiLink shared transport power functions
From: Fabio Estevam @ 2013-01-16 21:10 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1358368495-10499-1-git-send-email-coelho@ti.com>
On Wed, Jan 16, 2013 at 6:34 PM, Luciano Coelho <coelho@ti.com> wrote:
> +static int wilink_st_init(void)
> +{
> + int status;
> +
> + status = gpio_request(GPIO_BT_EN, "kim");
> + if (status) {
> + pr_err("%s: failed to request gpio %d\n", __func__,
> + GPIO_BT_EN);
> + return status;
> + }
> +
> + status = gpio_direction_output(GPIO_BT_EN, 0);
> + if (status)
> + pr_err("%s: unable to configure gpio %d", __func__,
> + GPIO_BT_EN);
> +
You could use gpio_request_one() instead.
^ permalink raw reply
* [PATCH 00/16] big.LITTLE low-level CPU and cluster power management
From: Nicolas Pitre @ 2013-01-16 21:18 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20130116160242.GB31318@arm.com>
On Wed, 16 Jan 2013, Catalin Marinas wrote:
> On Tue, Jan 15, 2013 at 04:44:23PM +0000, Nicolas Pitre wrote:
> > On Tue, 15 Jan 2013, Joseph Lo wrote:
> > > So do you have a plan to make it become a generic framework in this
> > > series or later work?
> >
> > It is already generic, except for the name. In other words, you could
> > start using this code already.
> >
> > I'm still debating a good substitute for the bL_ prefix in this series
> > to give it the appearance of generic code.
>
> mc_?
Bah. :-/
Nicolas
^ permalink raw reply
* [PATCH] OMAP: omap4-panda: add WiLink shared transport power functions
From: Luciano Coelho @ 2013-01-16 21:31 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CAOMZO5DtKT9wFvJz+nvJZRgR5aNf1xv9O7FOo4YocOoSsujQ=g@mail.gmail.com>
On Wed, 2013-01-16 at 19:10 -0200, Fabio Estevam wrote:
> On Wed, Jan 16, 2013 at 6:34 PM, Luciano Coelho <coelho@ti.com> wrote:
>
> > +static int wilink_st_init(void)
> > +{
> > + int status;
> > +
> > + status = gpio_request(GPIO_BT_EN, "kim");
> > + if (status) {
> > + pr_err("%s: failed to request gpio %d\n", __func__,
> > + GPIO_BT_EN);
> > + return status;
> > + }
> > +
> > + status = gpio_direction_output(GPIO_BT_EN, 0);
> > + if (status)
> > + pr_err("%s: unable to configure gpio %d", __func__,
> > + GPIO_BT_EN);
> > +
>
> You could use gpio_request_one() instead.
Good point. I'll send v2 using this instead:
gpio_request_one(GPIO_BT_EN, GPIOF_OUT_INIT_LOW, "kim")
--
Luca.
^ permalink raw reply
* [PATCH V4 5/5] ARM: tegra20: cpuidle: apply coupled cpuidle for powered-down mode
From: Stephen Warren @ 2013-01-16 21:31 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CAMbhsRTmGVrjnKa_z+zonGypU+U4r2iE=D-Zfvyoq8chY68QKQ@mail.gmail.com>
On 01/16/2013 11:55 AM, Colin Cross wrote:
> On Wed, Jan 16, 2013 at 12:11 AM, Joseph Lo <josephl@nvidia.com> wrote:
>> The "powered-down" cpuidle mode of Tegra20 needs the CPU0 be the last one
>> core to go into this mode before other core. The coupled cpuidle framework
>> can help to sync the MPCore to coupled state then go into "powered-down"
>> idle mode together. The driver can just assume the MPCore come into
>> "powered-down" mode at the same time. No need to take care if the CPU_0
>> goes into this mode along and only can put it into safe idle mode (WFI).
>>
>> The powered-down state of Tegra20 requires power gating both CPU cores.
>> When the secondary CPU requests to enter powered-down state, it saves
>> its own contexts and then enters WFI for waiting CPU0 in the same state.
>> When the CPU0 requests powered-down state, it attempts to put the secondary
>> CPU into reset to prevent it from waking up. Then power down both CPUs
>> together and power off the cpu rail.
>>
>> Be aware of that, you may see the legacy power state "LP2" in the code
Colin, since you only raised a few small issues on this series, does
that mean you're OK with it once those issues are fixed?
Joseph, we'll be merging Tegra114 in the near future. How will this
patch series affect Tegra114? Will the cpuidle driver simply fail to
register on Tegra114 (which would be fine until we explicitly add
support), or would we need to disable cpuidle in Kconfig to get a
working Tegra114 kernel. Does this patch series affect the answer to the
previous question? Thanks.
^ permalink raw reply
* [[PATCH v2]] OMAP: omap4-panda: add WiLink shared transport power functions
From: Luciano Coelho @ 2013-01-16 21:45 UTC (permalink / raw)
To: linux-arm-kernel
The code to enable and disable the WiLink shared transport has been
removed from the TI-ST driver, so it must be implemented in the board
files instead. Add the relevant operations to Panda's board file.
Additionally, add the UART2 muxing data, so it's properly configured.
Cc: stable <stable@vger.kernel.org> [3.7]
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
In v2: use gpio_request_one() instead of gpio_request() and
gpio_direction_output(). (Thanks Fabio!)
arch/arm/mach-omap2/board-omap4panda.c | 50 +++++++++++++++++++++++++++++---
1 file changed, 46 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 5c8e9ce..f44fccf 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -51,18 +51,50 @@
#define GPIO_HUB_NRESET 62
#define GPIO_WIFI_PMENA 43
#define GPIO_WIFI_IRQ 53
+#define GPIO_BT_EN 46
/* wl127x BT, FM, GPS connectivity chip */
+static int plat_kim_chip_enable(struct kim_data_s *kim_data)
+{
+ gpio_set_value(GPIO_BT_EN, GPIO_LOW);
+ mdelay(5);
+ gpio_set_value(GPIO_BT_EN, GPIO_HIGH);
+ mdelay(100);
+
+ return 0;
+}
+
+static int plat_kim_chip_disable(struct kim_data_s *kim_data)
+{
+ gpio_set_value(GPIO_BT_EN, GPIO_LOW);
+ mdelay(1);
+ gpio_set_value(GPIO_BT_EN, GPIO_HIGH);
+ mdelay(1);
+ gpio_set_value(GPIO_BT_EN, GPIO_LOW);
+
+ return 0;
+}
+
static struct ti_st_plat_data wilink_platform_data = {
- .nshutdown_gpio = 46,
.dev_name = "/dev/ttyO1",
.flow_cntrl = 1,
.baud_rate = 3000000,
- .chip_enable = NULL,
- .suspend = NULL,
- .resume = NULL,
+ .chip_enable = plat_kim_chip_enable,
+ .chip_disable = plat_kim_chip_disable,
};
+static int wilink_st_init(void)
+{
+ int status;
+
+ status = gpio_request_one(GPIO_BT_EN, GPIOF_OUT_INIT_LOW, "kim");
+ if (status)
+ pr_err("%s: failed to request gpio %d\n", __func__,
+ GPIO_BT_EN);
+
+ return status;
+}
+
static struct platform_device wl1271_device = {
.name = "kim",
.id = -1,
@@ -397,6 +429,12 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP_PULL_ENA),
OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ /* UART2 - BT/FM/GPS shared transport */
+ OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
@@ -433,6 +471,10 @@ static void __init omap4_panda_init(void)
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
+ ret = wilink_st_init();
+ if (ret)
+ pr_err("WiLink shared transport init failed: %d\n", ret);
+
omap4_panda_init_rev();
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
--
1.7.10.4
^ permalink raw reply related
* [RFC] OMAP: 4430sdp: add shared trasport devices to the board file
From: Luciano Coelho @ 2013-01-16 22:01 UTC (permalink / raw)
To: linux-arm-kernel
Add the btwilink, nfcwilink and shared transport devices to the board
file, including functions to power things on and off.
Additionally, add the UART2 muxing data, so it's properly configured.
Signed-off-by: Luciano Coelho <coelho@ti.com>
---
This is pretty much the same as the patch I just sent for panda, but
there were a few more things missing in the 4430sdp board file and I
also included NFC support.
I'm sending this as RFC because I'm not sure this is the right thing
to do for 4430sdp. This configuration works when the WiLink COM8
module is installed. The WLAN support is already hardcoded in this
file, so adding shared transport (BT/NFC/FM/GPS) support at least
won't make things much worse.
Additionally, only WiLink8 has optional support for NFC and I'm not
sure there is a way to figure that out at runtime.
arch/arm/mach-omap2/board-4430sdp.c | 76 +++++++++++++++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 1cc6696..7cf273e 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -29,6 +29,8 @@
#include <linux/platform_data/omap4-keypad.h>
#include <linux/usb/musb.h>
+#include <linux/ti_wilink_st.h>
+
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -53,6 +55,7 @@
#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184
#define OMAP4_SFH7741_ENABLE_GPIO 188
+#define GPIO_BT_EN 55
#define GPIO_WIFI_PMENA 54
#define GPIO_WIFI_IRQ 53
@@ -408,6 +411,66 @@ static struct platform_device sdp4430_abe_audio = {
},
};
+/* TI shared transport for Bluetooth and NFC */
+static int plat_kim_chip_enable(struct kim_data_s *kim_data)
+{
+ gpio_set_value(GPIO_BT_EN, GPIO_LOW);
+ mdelay(5);
+ gpio_set_value(GPIO_BT_EN, GPIO_HIGH);
+ mdelay(100);
+
+ return 0;
+}
+
+static int plat_kim_chip_disable(struct kim_data_s *kim_data)
+{
+ gpio_set_value(GPIO_BT_EN, GPIO_LOW);
+ mdelay(1);
+ gpio_set_value(GPIO_BT_EN, GPIO_HIGH);
+ mdelay(1);
+ gpio_set_value(GPIO_BT_EN, GPIO_LOW);
+
+ return 0;
+}
+
+static struct ti_st_plat_data wilink_pdata = {
+ .dev_name = "/dev/ttyO1",
+ .flow_cntrl = 1,
+ .baud_rate = 3000000,
+ .chip_enable = plat_kim_chip_enable,
+ .chip_disable = plat_kim_chip_disable,
+};
+
+static int wilink_st_init(void)
+{
+ int status;
+
+ status = gpio_request_one(GPIO_BT_EN, GPIOF_OUT_INIT_LOW, "kim");
+ if (status)
+ pr_err("%s: failed to request gpio %d\n", __func__,
+ GPIO_BT_EN);
+
+ return status;
+}
+
+static struct platform_device wl12xx_device = {
+ .name = "kim",
+ .id = -1,
+ .dev = {
+ .platform_data = &wilink_pdata,
+ },
+};
+
+static struct platform_device btwilink_device = {
+ .name = "btwilink",
+ .id = -1,
+};
+
+static struct platform_device nfcwilink_device = {
+ .name = "nfcwilink",
+ .id = -1,
+};
+
static struct platform_device *sdp4430_devices[] __initdata = {
&sdp4430_gpio_keys_device,
&sdp4430_leds_gpio,
@@ -416,6 +479,9 @@ static struct platform_device *sdp4430_devices[] __initdata = {
&sdp4430_dmic_codec,
&sdp4430_abe_audio,
&sdp4430_hdmi_audio_codec,
+ &wl12xx_device,
+ &btwilink_device,
+ &nfcwilink_device,
};
static struct omap_musb_board_data musb_board_data = {
@@ -632,6 +698,12 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP_PULL_ENA),
OMAP4_MUX(ABE_MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ /* UART2 - BT/FM/GPS shared transport */
+ OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+ OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
@@ -711,6 +783,10 @@ static void __init omap_4430sdp_init(void)
if (status)
pr_err("Keypad initialization failed: %d\n", status);
+ status = wilink_st_init();
+ if (status)
+ pr_err("WiLink shared transport init failed: %d\n", status);
+
omap_4430sdp_display_init();
}
--
1.7.10.4
^ permalink raw reply related
* [PATCH 1/7] dt: describe base reset signal binding
From: Stephen Warren @ 2013-01-16 22:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1358352787-15441-2-git-send-email-p.zabel@pengutronix.de>
On 01/16/2013 09:13 AM, Philipp Zabel wrote:
> From: Stephen Warren <swarren@nvidia.com>
>
> This binding is intended to represent the hardware reset signals present
> internally in most IC (SoC, FPGA, ...) designs.
>
> Such a binding would allow the creation of a "reset subsystem", which
> could replace APIs such as the following Tegra-specific API:
>
> void tegra_periph_reset_deassert(struct clk *c);
> void tegra_periph_reset_assert(struct clk *c);
>
> (Note that at present, Tegra couples reset assertion with the clock for
> the affected peripheral module. However, reset and clocking are two
> separate, yet admittedly related, concepts).
>
> Signed-off-by: Stephen Warren <swarren@nvidia.com>
You probably want to update the patch description; it was somewhat
appropriate when I sent the patch as an RFC to see what people thought
about the idea, but now you're actually providing the whole thing a more
specific description would be better.
Your S-o-b line should be present in all patches you send; add it after
mine. See Documentation/SubmittingPatches section "Sign your work" item
(c) (or perhaps (b) if you modified it).
^ permalink raw reply
* [PATCH 2/7] reset: Add reset controller API
From: Stephen Warren @ 2013-01-16 22:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1358352787-15441-3-git-send-email-p.zabel@pengutronix.de>
On 01/16/2013 09:13 AM, Philipp Zabel wrote:
> This adds a simple API for devices to request being reset
> by separate reset controller hardware and implements the
> reset signal device tree binding.
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> +obj-$(CONFIG_RESET_CONTROLLER) += core.o
> +
nit: blank line at EOF.
> diff --git a/drivers/reset/core.c b/drivers/reset/core.c
> +/**
> + * reset_control_reset - reset the controlled device
> + * @rstc: reset controller
> + */
> +int reset_control_reset(struct reset_control *rstc)
What time period is the reset signal asserted for; should there be a
parameter to control this?
> +{
> + if (rstc->rcdev->ops->reset)
> + return rstc->rcdev->ops->reset(rstc->id);
> +
> + return 0;
> +}
If there's no op, shouldn't the function fail?
> +/**
> + * reset_control_is_asserted - deasserts the reset line
Comment seems wrong.
Is this API useful; why wouldn't drivers just assert to de-assert it
based on their needs?
> +/**
> + * reset_control_get - Lookup and obtain a reference to a reset controller.
> + * @dev: device to be reset by the controller
> + * @id: reset line name
> + *
> + * Returns a struct reset_control or IS_ERR() condition containing errno.
OK, so NULL can't ever (legally) be returned.
> +struct reset_control *reset_control_get(struct device *dev, const char *id)
> + rcdev_node = NULL;
> + for (i = 0; rcdev_node == NULL; i++) {
...
> + rcdev_node = args.np;
> + rcdev_index = args.args[0];
Even though the loop condition tests rcdev_node, it'd be a lot easier to
realize that the loop bails out here because of that if you explicitly
wrote a break; here. Otherwise, it took a while for me to realize.
> +void reset_control_put(struct reset_control *rstc)
> +{
> + if (rstc == NULL || IS_ERR(rstc))
> + return;
... so (re: two comments above) you don't need to check for NULL here;
if someone passes NULL in here, they're passing some value that
reset_control_get() never passed back, so this API is free to do
whatever it wants...
> + kfree(rstc);
> + module_put(rstc->rcdev->owner);
You need to module_put() first, or copy rstc->rcdev, since otherwise
you're reading *rstc after it's freed.
This implementation only supports device tree. People might want the
APIs to work on non-device-tree systems too, although I guess that
should be easy enough to retrofit without changing the driver-visible API...
^ permalink raw reply
* [PATCH 7/7] ARM i.MX5: Add system reset controller (SRC) to i.MX51 and i.MX53 device tree
From: Stephen Warren @ 2013-01-16 22:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1358352787-15441-8-git-send-email-p.zabel@pengutronix.de>
On 01/16/2013 09:13 AM, Philipp Zabel wrote:
> Also, link SRC to IPU via phandle.
Aside from the comments I already made, the series,
Reviewed-by: Stephen Warren <swarren@nvidia.com>
although I'm not 100% sure if the ordering of patches maintains a
working i.MX build all the time? Does "git bisect" work across the series?
Who would merge these patches?
^ permalink raw reply
* [PATCH] tty: serial/vt8500_serial.c: fix bug caused by missing "{}"
From: Cong Ding @ 2013-01-16 22:25 UTC (permalink / raw)
To: linux-arm-kernel
It is obviously here should be braced by "{}" in the "if" branch (more than 1
line in the "if" branch), and by the
coding style document of the kernel I also add "{}" to the else branch.
Signed-off-by: Cong Ding <dinggnu@gmail.com>
---
drivers/tty/serial/vt8500_serial.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 8fd1814..ac46a6e 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -567,12 +567,13 @@ static int vt8500_serial_probe(struct platform_device *pdev)
if (!mmres || !irqres)
return -ENODEV;
- if (np)
+ if (np) {
port = of_alias_get_id(np, "serial");
if (port > VT8500_MAX_PORTS)
port = -1;
- else
+ } else {
port = -1;
+ }
if (port < 0) {
/* calculate the port id */
--
1.7.10.4
^ permalink raw reply related
* [PATCH] ata: sata_mv: fix sg_tbl_pool alignment
From: Soeren Moch @ 2013-01-16 22:26 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20130116183518.GL25500@titan.lakedaemon.net>
On 16.01.2013 19:35, Jason Cooper wrote:
>>>> On Wed, Jan 16, 2013 at 09:55:55AM +0100, Soeren Moch wrote:
>>>>> I don't want to say that Mareks patch is wrong, probably it triggers a
>>>>> bug somewhere else! (in em28xx?)
>
> Could you send the output of:
>
> lsusb -v -d VEND:PROD
>
> for the em28xx?
>
> thx,
>
> Jason.
>
Here is the lsusb output for both of my em28xx sticks.
Regards,
Soeren
Bus 001 Device 005: ID 0ccd:00b2 TerraTec Electronic GmbH
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0ccd TerraTec Electronic GmbH
idProduct 0x00b2
bcdDevice 1.00
iManufacturer 3 TERRATEC
iProduct 1 Cinergy HTC Stick
iSerial 2 123456789ABCD
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 305
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0ad0 2x 720 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0c00 2x 1024 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 4
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1300 3x 768 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 5
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1380 3x 896 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 6
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x13c0 3x 960 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 7
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 009: ID 2304:0242 Pinnacle Systems, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2304 Pinnacle Systems, Inc.
idProduct 0x0242
bcdDevice 1.00
iManufacturer 1 Pinnacle Systems
iProduct 2 PCTV 510e
iSerial 3 123456789012
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 305
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0ad0 2x 720 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0c00 2x 1024 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 4
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1300 3x 768 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 5
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1380 3x 896 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 6
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x13c0 3x 960 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 7
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 11
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x00c4 1x 196 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
^ permalink raw reply
* [GIT PULL] sunxi fixes for 3.8
From: Olof Johansson @ 2013-01-16 22:27 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <50F6F028.6060009@free-electrons.com>
On Wed, Jan 16, 2013 at 07:23:36PM +0100, Maxime Ripard wrote:
> Hi Olof, Arnd,
>
> Please consider pulling the following patch for 3.8.
>
> The sunxi UARTs are actually not a regular 8250 but rather uses a
> Synopsys DPB compatible UART.
>
> This patch fixes that.
>
> Thanks,
> Maxime
>
> The following changes since commit 43880f709dc59840849e31b01735ac587195ef8a:
>
> sunxi: Change the machine compatible string. (2012-12-23 18:20:15 +0100)
>
> are available in the git repository at:
>
> git://github.com/mripard/linux.git tags/sunxi-fixes-for-3.8-rc4
>
> for you to fetch changes up to 1bea07f16da0d77689cda7abe73939dd1dfdea22:
>
> ARM: sunxi: Use the Synosys APB UART instead of ns8250 (2013-01-16 19:13:18 +0100)
Pulled, thanks.
-Olof
^ permalink raw reply
* [PATCH] [RFC] ARM: compile fix for DEBUG_LL=y && MMU=n
From: Olof Johansson @ 2013-01-16 22:31 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1358346726-27199-1-git-send-email-u.kleine-koenig@pengutronix.de>
On Wed, Jan 16, 2013 at 03:32:06PM +0100, Uwe Kleine-K?nig wrote:
> debug_ll_addr is only used on machines with an MMU so it can be #ifdef'ed
> out safely. This fixes:
>
> arch/arm/kernel/debug.S: Assembler messages:
> arch/arm/kernel/debug.S:104: Error: too many positional arguments
>
> Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Stephen Warren <swarren@nvidia.com>
> Cc: Olof Johansson <olof@lixom.net>
> ---
> The obvious alternative fix is to make addruart on !MMU take 3
> arguments, too.
>
> The problem was introduced in
>
> e5c5f2a (ARM: implement debug_ll_io_init())
>
> which appeared in v3.8-rc1.
Since we introduced the breakage in arm-soc, I've picked up the fix (I guess
it could have gone through Russell's tree as well though).
I've added the reference to the introducing commit, and the acks/review tags.
Adding a defconfig for a !MMU platform seems like a good idea, since there's
several of us who make sure that there is build coverage of the defconfigs and
follow up on most of the breakage. Feel free to send one in for 3.9.
-Olof
^ permalink raw reply
* [PATCH v2] mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls
From: Soeren Moch @ 2013-01-16 22:36 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20130116174736.GJ25500@titan.lakedaemon.net>
On 16.01.2013 18:47, Jason Cooper wrote:
> On Wed, Jan 16, 2013 at 06:32:09PM +0100, Soeren Moch wrote:
>> On 16.01.2013 09:55, Soeren Moch wrote:
>>> On 16.01.2013 04:24, Soeren Moch wrote:
>>>> I did not bisect it, but Marek mentioned earlier that commit
>>>> e9da6e9905e639b0f842a244bc770b48ad0523e9 in Linux v3.6-rc1 introduced
>>>> new code for dma allocations. This is probably the root cause for the
>>>> new (mis-)behavior (due to my tests 3.6.0 is not working anymore).
>>>
>>> I don't want to say that Mareks patch is wrong, probably it triggers a
>>> bug somewhere else! (in em28xx?)
>>
>> The em28xx sticks are using isochronous usb transfers. Is there a
>> special handling for that?
>
> I'm looking at that now. It looks like the em28xx wants (as a maximum)
> 655040 bytes (em28xx-core.c:1088). There are 5 transfer buffers, with
> 64 max packets and 2047 max packet size (runtime reported max & 0x7ff).
>
> If it actually needs all of that, then the answer may be to just
> increase coherent_pool= when using that driver. I'll keep digging.
I already tested with 4M coherent pool size and could not see
significant improvement. Would it make sense to further increase the
buffer size?
Regards,
Soeren
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox