* [GIT PULL v3] arm-soc: Xilinx zynq timer changes for v3.9
From: Michal Simek @ 2013-01-28 12:53 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CAHTX3d+qeKPT3YYG3=YgWYN5YTS1oT9HoTEpVwC4GZAYve5uYw@mail.gmail.com>
Hi Olof,
based on your previous email I am sending updated pull request which is based
on arm-soc depends/cleanup branch.
As I wrote in my email I tend to keep there Soren's patch around
renaming PSS to PS
and be more strict on this for future.
I have also added one more patch which fix Rob's conversion to irqchip_init.
btw: As I mentioned in the previous email I want to add 2 defconfig
updates + maintainer
fragment. I have created branch zynq/misc in the same repo. Is this
name ok for you?
If yes, I will send you separate pull request just for this branch.
Thanks,
Michal
The following changes since commit f8060f5446b1f2782f0a8ca9be2d870ea4198aee:
Olof Johansson (1):
Merge tag 'gic-vic-to-irqchip' of
git://sources.calxeda.com/kernel/linux into next/cleanup
are available in the git repository at:
git://git.xilinx.com/linux-xlnx.git zynq/timer
Michal Simek (1):
arm: zynq: Add missing irqchip.h to common.c
Soren Brinkmann (7):
arm: zynq: timer: Replace PSS through PS
arm: zynq: timer: Remove unnecessary register write
arm: zynq: timer: Remove unused #defines
arm: zynq: timer: Align columns
arm: zynq: timer: Remove redundant #includes
arm: zynq: timer: Fix comment style
arm: zynq: timer: Set clock_event cpumask
arch/arm/mach-zynq/common.c | 3 +-
arch/arm/mach-zynq/common.h | 2 +-
arch/arm/mach-zynq/timer.c | 150 ++++++++++++++++++++----------------------
3 files changed, 74 insertions(+), 81 deletions(-)
--
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
^ permalink raw reply
* [PATCH] ARM: OMAP: hwmod_reset: Include errno.h to fix compilation error
From: Peter Ujfalusi @ 2013-01-28 12:55 UTC (permalink / raw)
To: linux-arm-kernel
Without the errno.h:
CC arch/arm/mach-omap2/omap_hwmod_reset.o
arch/arm/mach-omap2/omap_hwmod_reset.c: In function ?omap_hwmod_aess_preprogram?:
arch/arm/mach-omap2/omap_hwmod_reset.c:47:11: error: ?EINVAL? undeclared (first use in this function)
arch/arm/mach-omap2/omap_hwmod_reset.c:47:11: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [arch/arm/mach-omap2/omap_hwmod_reset.o] Error 1
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
Hi Paul,
I could not find the patches from Sebastien's series:
http://www.mail-archive.com/linux-omap at vger.kernel.org/msg82971.html
But AFAIK you have taken them for 3.9.
This patch is on top of it to fix compilation error.
Regards,
Peter
arch/arm/mach-omap2/omap_hwmod_reset.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-omap2/omap_hwmod_reset.c b/arch/arm/mach-omap2/omap_hwmod_reset.c
index bba43fa..65e186c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_reset.c
+++ b/arch/arm/mach-omap2/omap_hwmod_reset.c
@@ -24,6 +24,7 @@
* 02110-1301 USA
*/
#include <linux/kernel.h>
+#include <linux/errno.h>
#include <sound/aess.h>
--
1.8.1.1
^ permalink raw reply related
* [PATCH 5/6] ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
From: Dave Martin @ 2013-01-28 13:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20130128090240.GA7754@e106331-lin.cambridge.arm.com>
On Mon, Jan 28, 2013 at 09:02:40AM +0000, Mark Rutland wrote:
> On Fri, Jan 25, 2013 at 07:15:48PM +0000, Kukjin Kim wrote:
> > Tomasz Figa wrote:
> >
> > [...]
> >
> > > > Well, the number of CPU types does not grow rapidly. It will be much
> > > > less than one per SoC -- so keeping the list up to date shouldn't be
> > > > that much effort.
> > > >
> > > > For ARM1176JZF-S, it could make sense for the comatible list to be
> > > >
> > > > "arm,arm1176jzf-s", "arm,arm1176"
> > > >
> > > > ...since the differences between 1176 variants are software probeable
> > > > (i.e., whether there is an FPU or not). AFAIK the J, Z apply to all
> > > > ARM1176, and the -S (synthesisable RTL) is nothing to do with software.
> > > > The kernel probably only really needs to know "arm,arm1176".
> > >
> > > OK. So the conclusion is that I should change the cpus node to following:
> > >
> > > cpus {
> > > cpu {
> >
> > cpu at 0 { ?
>
> As the CPU has no MPIDR, and thus doesn't have a reg property, there's no reason
> to have a unit address. Just "cpu" should be fine.
>
> >
> > > compatible = "arm,arm1176jzf-s", "arm,arm1176";
> > > };
> > > };
> > >
> > > Am I right?
> > >
> > I think so :-)
> >
> > - Kukjin
> >
>
> As Dave pointed out, the "jzf-s" portion might be superfluous. It's worth
> having the "arm,arm1176", though.
I think we should always have a fully-qualified part name as the first
compatible entry, following general devicetree policy. It's better to
have this and not need it than to discover later that we want it and
incompatibly backport it in.
Before deciding, do we follow a consistent policy for other CPUs, such
as arm1136?
The issues there are similar: the only software-visible difference between
arm1136j-s and arm1136jf-s should be the absence/presence of VFP, and it
looks like the code in vfpmodule.c should be able to probe it.
Cheers
---Dave
^ permalink raw reply
* [PATCHv1 for soc 4/5] arm: Add v7_invalidate_l1 to cache-v7.S
From: Shawn Guo @ 2013-01-28 13:13 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1359131057.32148.9.camel@linux-builds1>
On Fri, Jan 25, 2013 at 10:24:17AM -0600, Dinh Nguyen wrote:
> Hi Pavel,
> On Fri, 2013-01-25 at 16:49 +0100, Pavel Machek wrote:
> > Hi!
> >
> > > mach-socfpga is another platform that needs to use
> > > v7_invalidate_l1 to bringup additional cores. There was a comment that
> > > the ideal place for v7_invalidate_l1 should be in arm/mm/cache-v7.S
> >
> > If there are three copies of code, with fourth one needed for next
> > platform, moving it into common code makes sense.
> >
> > But... The code was not identical before the merge. Are you sure that
> > the differences do not hurt? At the very least, it should be mentioned
> > in the changelog.
>
> Indeed, the addition of
>
> mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
>
This becomes unnecessary since commit 612539e (ARM: 7296/1: proc-v7.S:
remove HARVARD_CACHE preprocessor guards) gets in.
Shawn
> was done by commit # 5b2acf384c8a8707d32a98106192ee7187e4446d
>
> This adds invalidate I-Cache as well as D-Cache, which I think should be
> ok for most platforms.
>
^ permalink raw reply
* [PATCH v2 1/3] pwm: Add pwm_cansleep() as exported API to users
From: Thierry Reding @ 2013-01-28 13:16 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <510659A3.7070906@epfl.ch>
On Mon, Jan 28, 2013 at 11:57:39AM +0100, Florian Vaussard wrote:
> Le 28/01/2013 10:57, Thierry Reding a ?crit :
> >On Mon, Jan 28, 2013 at 10:36:07AM +0100, Florian Vaussard wrote:
> >>Hello,
> >>
> >>Le 28/01/2013 09:45, Peter Ujfalusi a ?crit :
> >>>hi Thierry,
> >>>
> >>>On 01/26/2013 06:40 AM, Thierry Reding wrote:
> >[...]
> >>>>>+{
> >>>>>+ return pwm->chip->can_sleep;
> >>>>>+}
> >>>>>+EXPORT_SYMBOL_GPL(pwm_cansleep);
> >>>>
> >>>>Would it make sense to check for NULL pointers here? I guess that
> >>>>passing NULL into the function could be considered a programming error
> >>>>and an oops would be okay, but in that case there's no point in making
> >>>>the function return an int. Also see my next comment.
> >>>
> >>>While it is unlikely to happen it is better to be safe, something like this
> >>>will do:
> >>>
> >>>return pwm ? pwm->chip->can_sleep : 0;
> >>>
> >>
> >>Ok. And what about:
> >>
> >>BUG_ON(pwm == NULL);
> >>return pwm->chip->can_sleep;
> >
> >I don't think we need that. In case pwm == NULL, dereferencing it will
> >oops anyway. So either we make it safe and return an error code, or we
> >let it oops without explicit BUG_ON().
> >
>
> Calling this function with a NULL pointer is a programming error, so there
> is no error codes for such errors.
You could return -EINVAL if pwm == NULL.
> I propose to return bool, and let it oops if such case happens.
My point was that it will oops even if you don't use BUG_ON() so there
isn't so much point in using it explicitly.
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130128/a79cde7f/attachment.sig>
^ permalink raw reply
* [PATCH 00/13] ARM: spear multiplatform support
From: Arnd Bergmann @ 2013-01-28 13:37 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <51065F7C.3030407@st.com>
On Monday 28 January 2013, vipul kumar samar wrote:
> Hello Arnd,
>
> On 1/26/2013 5:05 AM, Arnd Bergmann wrote:
> > This is a series I did some time ago but forgot to
> > send out earlier. I'd like to get this into v3.9,
> > so please give this a test if you can.
>
> Me and bhavna tried to test this patch set on spear1340 and
> spear320-hmi. We applied your patch set on the latest kernel v3.8-rc5
> and in both case (1340 and 320-hmi) we observe that the kernel load
> address is changed form 0x8000 to 0xfffffff2.
Hi Vipul and Bhavna,
Thanks for testing out the patches. I forgot about the loadaddress,
which indeed does not get set for multiplatform kernels, because
the kernel does not know the correct address when it depends on
the platform you are booting on.
The recommended solution for this is to boot a normal 'vmlinux'
or 'zImage' file rather than a uImage file. If you u-boot version
is too old for that and you cannot update, you can manually
call 'mkimage' to create a uImage file with the correct load
address.
Arnd
^ permalink raw reply
* [PATCH 3/4 v11] arm highbank: add support for pl320 IPC
From: Mark Langsdorf @ 2013-01-28 13:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1457500.uzVh9cxXhS@vostro.rjw.lan>
On 01/28/2013 06:49 AM, Rafael J. Wysocki wrote:
>> +int pl320_ipc_register_notifier(struct notifier_block *nb)
>> +{
>> + return atomic_notifier_chain_register(&ipc_notifier, nb);
>> +}
>> +EXPORT_SYMBOL(pl320_ipc_register_notifier);
>> +
>> +int pl320_ipc_unregister_notifier(struct notifier_block *nb)
>> +{
>> + return atomic_notifier_chain_unregister(&ipc_notifier, nb);
>> +}
>> +EXPORT_SYMBOL(pl320_ipc_unregister_notifier);
>
> I need all of your symbols to be exported with EXPORT_SYMBOL_GPL().
>
> Is it OK to make that change when applying the patch or do you want to send
> a new one?
I probably should resend so I can include the drivers level Kconfig and
Makefile.
I'll get that out this morning.
--Mark Langsdorf
Calxeda, Inc.
^ permalink raw reply
* [PATCH v2 0/6] ARM: davinci: da850: add ethernet driver DT support
From: Prabhakar Lad @ 2013-01-28 13:47 UTC (permalink / raw)
To: linux-arm-kernel
From: Lad, Prabhakar <prabhakar.lad@ti.com>
This patch set enables Ethernet support through device tree model.
This patch set enables mii interface only and is being tested to boot via
rootfs. The rmii phy is present on the i2c gpio expander chip (UI board)
for which yet support needs to be added, once the DT support for the chip
is enabled, enabling rmii will be subsequnet patch.
Changes for v2:
1: Enabled mdio device.
2: Fixed clock lookup.
Lad, Prabhakar (6):
ARM: davinci: da850: fix clock lookup for mdio device
ARM: davinci: da850: add DT node for mdio device
ARM: davinci: da850: add OF_DEV_AUXDATA entry for mdio.
ARM: davinci: da850: add DT node for eth0.
ARM: davinci: da850: add OF_DEV_AUXDATA entry for eth0.
ARM: davinci: da850: configure system configuration chip(CFGCHIP3)
for emac
arch/arm/boot/dts/da850-evm.dts | 8 ++++++
arch/arm/boot/dts/da850.dtsi | 42 +++++++++++++++++++++++++++++++++
arch/arm/mach-davinci/da850.c | 1 +
arch/arm/mach-davinci/da8xx-dt.c | 38 +++++++++++++++++++++++++++++-
arch/arm/mach-davinci/devices-da8xx.c | 8 +----
5 files changed, 90 insertions(+), 7 deletions(-)
--
1.7.4.1
^ permalink raw reply
* [PATCH v2 1/6] ARM: davinci: da850: fix clock lookup for mdio device
From: Prabhakar Lad @ 2013-01-28 13:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1359380879-26306-1-git-send-email-prabhakar.lad@ti.com>
From: Lad, Prabhakar <prabhakar.lad@ti.com>
This patch removes the clock alias for mdio device and adds a entry
in clock lookup table, this entry can now be used by both DT and NON
DT case.
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Cc: davinci-linux-open-source at linux.davincidsp.com
Cc: netdev at vger.kernel.org
Cc: devicetree-discuss at lists.ozlabs.org
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
arch/arm/mach-davinci/da850.c | 1 +
arch/arm/mach-davinci/devices-da8xx.c | 8 ++------
2 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 86056ca..f74bfb6 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -402,6 +402,7 @@ static struct clk_lookup da850_clks[] = {
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "rmii", &rmii_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
+ CLK("davinci_mdio.0", "fck", &emac_clk),
CLK("davinci-mcasp.0", NULL, &mcasp_clk),
CLK("da8xx_lcdc.0", "fck", &lcdc_clk),
CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 2d5502d..52faa05 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -444,12 +444,8 @@ int __init da8xx_register_emac(void)
ret = platform_device_register(&da8xx_mdio_device);
if (ret < 0)
return ret;
- ret = platform_device_register(&da8xx_emac_device);
- if (ret < 0)
- return ret;
- ret = clk_add_alias(NULL, dev_name(&da8xx_mdio_device.dev),
- NULL, &da8xx_emac_device.dev);
- return ret;
+
+ return platform_device_register(&da8xx_emac_device);
}
static struct resource da830_mcasp1_resources[] = {
--
1.7.4.1
^ permalink raw reply related
* [PATCH v2 2/6] ARM: davinci: da850: add DT node for mdio device
From: Prabhakar Lad @ 2013-01-28 13:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1359380879-26306-1-git-send-email-prabhakar.lad@ti.com>
From: Lad, Prabhakar <prabhakar.lad@ti.com>
Add mdio device tree node information to da850 by
providing register details and bus frequency of mdio.
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Cc: davinci-linux-open-source at linux.davincidsp.com
Cc: netdev at vger.kernel.org
Cc: devicetree-discuss at lists.ozlabs.org
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
arch/arm/boot/dts/da850-evm.dts | 3 +++
arch/arm/boot/dts/da850.dtsi | 7 +++++++
2 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 98c1a48..a319491 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -27,6 +27,9 @@
serial2: serial at 1d0d000 {
status = "okay";
};
+ mdio: davinci_mdio at 1e24000 {
+ status = "okay";
+ };
};
nand_cs3 at 62000000 {
status = "okay";
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 7c84822..ba28f2d 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -81,6 +81,13 @@
interrupts = <61>;
status = "disabled";
};
+ mdio: davinci_mdio at 1e24000 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x224000 0x1000>;
+ bus_freq = <2200000>;
+ };
};
nand_cs3 at 62000000 {
compatible = "ti,davinci-nand";
--
1.7.4.1
^ permalink raw reply related
* [PATCH v2 3/6] ARM: davinci: da850: add OF_DEV_AUXDATA entry for mdio.
From: Prabhakar Lad @ 2013-01-28 13:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1359380879-26306-1-git-send-email-prabhakar.lad@ti.com>
From: Lad, Prabhakar <prabhakar.lad@ti.com>
Add OF_DEV_AUXDATA for mdio driver in da850 board dt
file to use mdio clock.
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Cc: davinci-linux-open-source at linux.davincidsp.com
Cc: netdev at vger.kernel.org
Cc: devicetree-discuss at lists.ozlabs.org
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
arch/arm/mach-davinci/da8xx-dt.c | 8 +++++++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 37c27af..bd00042 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -39,9 +39,15 @@ static void __init da8xx_init_irq(void)
#ifdef CONFIG_ARCH_DAVINCI_DA850
+struct of_dev_auxdata da8xx_auxdata[] __initdata = {
+ OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL),
+ {},
+};
+
static void __init da850_init_machine(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table,
+ da8xx_auxdata, NULL);
da8xx_uart_clk_enable();
}
--
1.7.4.1
^ permalink raw reply related
* [PATCH v2 4/6] ARM: davinci: da850: add DT node for eth0.
From: Prabhakar Lad @ 2013-01-28 13:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1359380879-26306-1-git-send-email-prabhakar.lad@ti.com>
From: Lad, Prabhakar <prabhakar.lad@ti.com>
Add eth0 device tree node information and pinmux for mii to da850 by
providing interrupt details and local mac address of eth0.
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Cc: davinci-linux-open-source at linux.davincidsp.com
Cc: netdev at vger.kernel.org
Cc: devicetree-discuss at lists.ozlabs.org
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
arch/arm/boot/dts/da850-evm.dts | 5 +++++
arch/arm/boot/dts/da850.dtsi | 35 +++++++++++++++++++++++++++++++++++
2 files changed, 40 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index a319491..19aa2b3 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -30,6 +30,11 @@
mdio: davinci_mdio at 1e24000 {
status = "okay";
};
+ eth0: emac at 1e20000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mii_pins>;
+ };
};
nand_cs3 at 62000000 {
status = "okay";
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index ba28f2d..76905f3 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -56,6 +56,26 @@
0x30 0x01100000 0x0ff00000
>;
};
+ mii_pins: pinmux_mii_pins {
+ pinctrl-single,bits = <
+ /*
+ * MII_TXEN, MII_TXCLK, MII_COL
+ * MII_TXD_3, MII_TXD_2, MII_TXD_1
+ * MII_TXD_0
+ */
+ 0x8 0x88888880 0xfffffff0
+ /*
+ * MII_RXER, MII_CRS, MII_RXCLK
+ * MII_RXDV, MII_RXD_3, MII_RXD_2
+ * MII_RXD_1, MII_RXD_0
+ */
+ 0xc 0x88888888 0xffffffff
+ /* MDIO_CLK, MDIO_D */
+ 0x10 0x00222288 0x00ffffff
+ /* GPIO2_6 */
+ 0x18 0x00000080 0x000000f0
+ >;
+ };
};
serial0: serial at 1c42000 {
compatible = "ns16550a";
@@ -88,6 +108,21 @@
reg = <0x224000 0x1000>;
bus_freq = <2200000>;
};
+ eth0: emac at 1e20000 {
+ compatible = "ti,davinci-dm6467-emac";
+ reg = <0x220000 0x4000>;
+ ti,davinci-ctrl-reg-offset = <0x3000>;
+ ti,davinci-ctrl-mod-reg-offset = <0x2000>;
+ ti,davinci-ctrl-ram-offset = <0>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <33
+ 34
+ 35
+ 36
+ >;
+ phy-handle = <&mdio>;
+ };
};
nand_cs3 at 62000000 {
compatible = "ti,davinci-nand";
--
1.7.4.1
^ permalink raw reply related
* [PATCH v2 5/6] ARM: davinci: da850: add OF_DEV_AUXDATA entry for eth0.
From: Prabhakar Lad @ 2013-01-28 13:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1359380879-26306-1-git-send-email-prabhakar.lad@ti.com>
From: Lad, Prabhakar <prabhakar.lad@ti.com>
Add OF_DEV_AUXDATA for eth0 driver in da850 board dt
file to use emac clock.
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Cc: davinci-linux-open-source at linux.davincidsp.com
Cc: netdev at vger.kernel.org
Cc: devicetree-discuss at lists.ozlabs.org
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
arch/arm/mach-davinci/da8xx-dt.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index bd00042..e533a0a 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -41,6 +41,8 @@ static void __init da8xx_init_irq(void)
struct of_dev_auxdata da8xx_auxdata[] __initdata = {
OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL),
+ OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1",
+ NULL),
{},
};
--
1.7.4.1
^ permalink raw reply related
* [PATCH v2 6/6] ARM: davinci: da850: configure system configuration chip(CFGCHIP3) for emac
From: Prabhakar Lad @ 2013-01-28 13:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1359380879-26306-1-git-send-email-prabhakar.lad@ti.com>
From: Lad, Prabhakar <prabhakar.lad@ti.com>
The system configuration chip CFGCHIP3, controls the emac module.
This patch appropriately configures this register for emac and
sets DA850_MII_MDIO_CLKEN_PIN GPIO pin appropriately.
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Cc: davinci-linux-open-source at linux.davincidsp.com
Cc: netdev at vger.kernel.org
Cc: devicetree-discuss at lists.ozlabs.org
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Heiko Schocher <hs@denx.de>
---
arch/arm/mach-davinci/da8xx-dt.c | 28 ++++++++++++++++++++++++++++
1 files changed, 28 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index e533a0a..4a096e3 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
#include <linux/io.h>
+#include <linux/gpio.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
@@ -39,6 +40,32 @@ static void __init da8xx_init_irq(void)
#ifdef CONFIG_ARCH_DAVINCI_DA850
+static void __init da8xx_config_emac(void)
+{
+#define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6)
+#define DA850_EMAC_MODE_SELECT BIT(8)
+ void __iomem *cfg_chip3_base;
+ int ret;
+ u32 val;
+
+ cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
+
+ val = __raw_readl(cfg_chip3_base);
+ val &= ~DA850_EMAC_MODE_SELECT;
+ /* configure the CFGCHIP3 register for MII */
+ __raw_writel(val, cfg_chip3_base);
+ pr_info("EMAC: MII PHY configured\n");
+
+ ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
+ if (ret) {
+ pr_warn("Cannot open GPIO %d\n",
+ DA850_MII_MDIO_CLKEN_PIN);
+ return;
+ }
+ /* Enable/Disable MII MDIO clock */
+ gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, 0);
+}
+
struct of_dev_auxdata da8xx_auxdata[] __initdata = {
OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1",
@@ -52,6 +79,7 @@ static void __init da850_init_machine(void)
da8xx_auxdata, NULL);
da8xx_uart_clk_enable();
+ da8xx_config_emac();
}
static const char *da850_boards_compat[] __initdata = {
--
1.7.4.1
^ permalink raw reply related
* [PATCH 1/5] pinctrl/abx500: add AB8500 sub-driver
From: Linus Walleij @ 2013-01-28 13:49 UTC (permalink / raw)
To: linux-arm-kernel
From: Patrice Chotard <patrice.chotard@st.com>
This adds a subdriver for the AB8500 pinctrl portions.
As the pin controller (also the ABx500 controllers) is an
inherent part of the SoC and will prevent boot if not
available, select this from the Ux500 SoC Kconfig.
Cc: arm at kernel.org
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Requesting an ACK from the ARM SoC maintainers for this patch.
---
arch/arm/mach-ux500/Kconfig | 1 +
drivers/pinctrl/Kconfig | 4 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-ab8500.c | 484 +++++++++++++++++++++++++++++++++++++++
drivers/pinctrl/pinctrl-abx500.c | 3 +
drivers/pinctrl/pinctrl-abx500.h | 13 ++
6 files changed, 506 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-ab8500.c
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 2c090d7..31f1b5a 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -19,6 +19,7 @@ config UX500_SOC_DB8500
select CPU_FREQ_TABLE if CPU_FREQ
select MFD_DB8500_PRCMU
select PINCTRL_DB8500
+ select PINCTRL_AB8500
select REGULATOR
select REGULATOR_DB8500_PRCMU
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index ba3038c..367556f 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -33,6 +33,10 @@ config PINCTRL_ABX500
help
Select this to enable the ABx500 family IC GPIO driver
+config PINCTRL_AB8500
+ bool "AB8500 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
config PINCTRL_AT91
bool "AT91 pinctrl driver"
depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index ead4fa7..aad5c93 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_PINCTRL) += devicetree.o
endif
obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o
obj-$(CONFIG_PINCTRL_ABX500) += pinctrl-abx500.o
+obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o
diff --git a/drivers/pinctrl/pinctrl-ab8500.c b/drivers/pinctrl/pinctrl-ab8500.c
new file mode 100644
index 0000000..2cd424e
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ab8500.c
@@ -0,0 +1,484 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include "pinctrl-abx500.h"
+
+/* All the pins that can be used for GPIO and some other functions */
+#define ABX500_GPIO(offset) (offset)
+
+#define AB8500_PIN_T10 ABX500_GPIO(1)
+#define AB8500_PIN_T9 ABX500_GPIO(2)
+#define AB8500_PIN_U9 ABX500_GPIO(3)
+#define AB8500_PIN_W2 ABX500_GPIO(4)
+/* hole */
+#define AB8500_PIN_Y18 ABX500_GPIO(6)
+#define AB8500_PIN_AA20 ABX500_GPIO(7)
+#define AB8500_PIN_W18 ABX500_GPIO(8)
+#define AB8500_PIN_AA19 ABX500_GPIO(9)
+#define AB8500_PIN_U17 ABX500_GPIO(10)
+#define AB8500_PIN_AA18 ABX500_GPIO(11)
+#define AB8500_PIN_U16 ABX500_GPIO(12)
+#define AB8500_PIN_W17 ABX500_GPIO(13)
+#define AB8500_PIN_F14 ABX500_GPIO(14)
+#define AB8500_PIN_B17 ABX500_GPIO(15)
+#define AB8500_PIN_F15 ABX500_GPIO(16)
+#define AB8500_PIN_P5 ABX500_GPIO(17)
+#define AB8500_PIN_R5 ABX500_GPIO(18)
+#define AB8500_PIN_U5 ABX500_GPIO(19)
+#define AB8500_PIN_T5 ABX500_GPIO(20)
+#define AB8500_PIN_H19 ABX500_GPIO(21)
+#define AB8500_PIN_G20 ABX500_GPIO(22)
+#define AB8500_PIN_G19 ABX500_GPIO(23)
+#define AB8500_PIN_T14 ABX500_GPIO(24)
+#define AB8500_PIN_R16 ABX500_GPIO(25)
+#define AB8500_PIN_M16 ABX500_GPIO(26)
+#define AB8500_PIN_J6 ABX500_GPIO(27)
+#define AB8500_PIN_K6 ABX500_GPIO(28)
+#define AB8500_PIN_G6 ABX500_GPIO(29)
+#define AB8500_PIN_H6 ABX500_GPIO(30)
+#define AB8500_PIN_F5 ABX500_GPIO(31)
+#define AB8500_PIN_G5 ABX500_GPIO(32)
+/* hole */
+#define AB8500_PIN_R17 ABX500_GPIO(34)
+#define AB8500_PIN_W15 ABX500_GPIO(35)
+#define AB8500_PIN_A17 ABX500_GPIO(36)
+#define AB8500_PIN_E15 ABX500_GPIO(37)
+#define AB8500_PIN_C17 ABX500_GPIO(38)
+#define AB8500_PIN_E16 ABX500_GPIO(39)
+#define AB8500_PIN_T19 ABX500_GPIO(40)
+#define AB8500_PIN_U19 ABX500_GPIO(41)
+#define AB8500_PIN_U2 ABX500_GPIO(42)
+
+/* indicates the highest GPIO number */
+#define AB8500_GPIO_MAX_NUMBER 42
+
+/*
+ * The names of the pins are denoted by GPIO number and ball name, even
+ * though they can be used for other things than GPIO, this is the first
+ * column in the table of the data sheet and often used on schematics and
+ * such.
+ */
+static const struct pinctrl_pin_desc ab8500_pins[] = {
+ PINCTRL_PIN(AB8500_PIN_T10, "GPIO1_T10"),
+ PINCTRL_PIN(AB8500_PIN_T9, "GPIO2_T9"),
+ PINCTRL_PIN(AB8500_PIN_U9, "GPIO3_U9"),
+ PINCTRL_PIN(AB8500_PIN_W2, "GPIO4_W2"),
+ /* hole */
+ PINCTRL_PIN(AB8500_PIN_Y18, "GPIO6_Y18"),
+ PINCTRL_PIN(AB8500_PIN_AA20, "GPIO7_AA20"),
+ PINCTRL_PIN(AB8500_PIN_W18, "GPIO8_W18"),
+ PINCTRL_PIN(AB8500_PIN_AA19, "GPIO9_AA19"),
+ PINCTRL_PIN(AB8500_PIN_U17, "GPIO10_U17"),
+ PINCTRL_PIN(AB8500_PIN_AA18, "GPIO11_AA18"),
+ PINCTRL_PIN(AB8500_PIN_U16, "GPIO12_U16"),
+ PINCTRL_PIN(AB8500_PIN_W17, "GPIO13_W17"),
+ PINCTRL_PIN(AB8500_PIN_F14, "GPIO14_F14"),
+ PINCTRL_PIN(AB8500_PIN_B17, "GPIO15_B17"),
+ PINCTRL_PIN(AB8500_PIN_F15, "GPIO16_F15"),
+ PINCTRL_PIN(AB8500_PIN_P5, "GPIO17_P5"),
+ PINCTRL_PIN(AB8500_PIN_R5, "GPIO18_R5"),
+ PINCTRL_PIN(AB8500_PIN_U5, "GPIO19_U5"),
+ PINCTRL_PIN(AB8500_PIN_T5, "GPIO20_T5"),
+ PINCTRL_PIN(AB8500_PIN_H19, "GPIO21_H19"),
+ PINCTRL_PIN(AB8500_PIN_G20, "GPIO22_G20"),
+ PINCTRL_PIN(AB8500_PIN_G19, "GPIO23_G19"),
+ PINCTRL_PIN(AB8500_PIN_T14, "GPIO24_T14"),
+ PINCTRL_PIN(AB8500_PIN_R16, "GPIO25_R16"),
+ PINCTRL_PIN(AB8500_PIN_M16, "GPIO26_M16"),
+ PINCTRL_PIN(AB8500_PIN_J6, "GPIO27_J6"),
+ PINCTRL_PIN(AB8500_PIN_K6, "GPIO28_K6"),
+ PINCTRL_PIN(AB8500_PIN_G6, "GPIO29_G6"),
+ PINCTRL_PIN(AB8500_PIN_H6, "GPIO30_H6"),
+ PINCTRL_PIN(AB8500_PIN_F5, "GPIO31_F5"),
+ PINCTRL_PIN(AB8500_PIN_G5, "GPIO32_G5"),
+ /* hole */
+ PINCTRL_PIN(AB8500_PIN_R17, "GPIO34_R17"),
+ PINCTRL_PIN(AB8500_PIN_W15, "GPIO35_W15"),
+ PINCTRL_PIN(AB8500_PIN_A17, "GPIO36_A17"),
+ PINCTRL_PIN(AB8500_PIN_E15, "GPIO37_E15"),
+ PINCTRL_PIN(AB8500_PIN_C17, "GPIO38_C17"),
+ PINCTRL_PIN(AB8500_PIN_E16, "GPIO39_E16"),
+ PINCTRL_PIN(AB8500_PIN_T19, "GPIO40_T19"),
+ PINCTRL_PIN(AB8500_PIN_U19, "GPIO41_U19"),
+ PINCTRL_PIN(AB8500_PIN_U2, "GPIO42_U2"),
+};
+
+/*
+ * Maps local GPIO offsets to local pin numbers
+ */
+static const struct abx500_pinrange ab8500_pinranges[] = {
+ ABX500_PINRANGE(1, 4, ABX500_ALT_A),
+ ABX500_PINRANGE(6, 4, ABX500_ALT_A),
+ ABX500_PINRANGE(10, 4, ABX500_DEFAULT),
+ ABX500_PINRANGE(14, 12, ABX500_ALT_A),
+ ABX500_PINRANGE(26, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(27, 6, ABX500_ALT_A),
+ ABX500_PINRANGE(34, 1, ABX500_ALT_A),
+ ABX500_PINRANGE(35, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(36, 7, ABX500_ALT_A),
+};
+
+/*
+ * Read the pin group names like this:
+ * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
+ *
+ * The groups are arranged as sets per altfunction column, so we can
+ * mux in one group at a time by selecting the same altfunction for them
+ * all. When functions require pins on different altfunctions, you need
+ * to combine several groups.
+ */
+
+/* default column */
+static const unsigned sysclkreq2_d_1_pins[] = { AB8500_PIN_T10 };
+static const unsigned sysclkreq3_d_1_pins[] = { AB8500_PIN_T9 };
+static const unsigned sysclkreq4_d_1_pins[] = { AB8500_PIN_U9 };
+static const unsigned sysclkreq6_d_1_pins[] = { AB8500_PIN_W2 };
+static const unsigned ycbcr0123_d_1_pins[] = { AB8500_PIN_Y18, AB8500_PIN_AA20,
+ AB8500_PIN_W18, AB8500_PIN_AA19};
+static const unsigned gpio10_d_1_pins[] = { AB8500_PIN_U17 };
+static const unsigned gpio11_d_1_pins[] = { AB8500_PIN_AA18 };
+static const unsigned gpio12_d_1_pins[] = { AB8500_PIN_U16 };
+static const unsigned gpio13_d_1_pins[] = { AB8500_PIN_W17 };
+static const unsigned pwmout1_d_1_pins[] = { AB8500_PIN_F14 };
+static const unsigned pwmout2_d_1_pins[] = { AB8500_PIN_B17 };
+static const unsigned pwmout3_d_1_pins[] = { AB8500_PIN_F15 };
+
+/* audio data interface 1*/
+static const unsigned adi1_d_1_pins[] = { AB8500_PIN_P5, AB8500_PIN_R5,
+ AB8500_PIN_U5, AB8500_PIN_T5 };
+/* USBUICC */
+static const unsigned usbuicc_d_1_pins[] = { AB8500_PIN_H19, AB8500_PIN_G20,
+ AB8500_PIN_G19 };
+static const unsigned sysclkreq7_d_1_pins[] = { AB8500_PIN_T14 };
+static const unsigned sysclkreq8_d_1_pins[] = { AB8500_PIN_R16 };
+static const unsigned gpio26_d_1_pins[] = { AB8500_PIN_M16 };
+/* Digital microphone 1 and 2 */
+static const unsigned dmic12_d_1_pins[] = { AB8500_PIN_J6, AB8500_PIN_K6 };
+/* Digital microphone 3 and 4 */
+static const unsigned dmic34_d_1_pins[] = { AB8500_PIN_G6, AB8500_PIN_H6 };
+/* Digital microphone 5 and 6 */
+static const unsigned dmic56_d_1_pins[] = { AB8500_PIN_F5, AB8500_PIN_G5 };
+static const unsigned extcpena_d_1_pins[] = { AB8500_PIN_R17 };
+static const unsigned gpio35_d_1_pins[] = { AB8500_PIN_W15 };
+/* APE SPI */
+static const unsigned apespi_d_1_pins[] = { AB8500_PIN_A17, AB8500_PIN_E15,
+ AB8500_PIN_C17, AB8500_PIN_E16};
+/* modem SDA/SCL */
+static const unsigned modsclsda_d_1_pins[] = { AB8500_PIN_T19, AB8500_PIN_U19 };
+static const unsigned sysclkreq5_d_1_pins[] = { AB8500_PIN_U2 };
+
+/* Altfunction A column */
+static const unsigned gpio1_a_1_pins[] = { AB8500_PIN_T10 };
+static const unsigned gpio2_a_1_pins[] = { AB8500_PIN_T9 };
+static const unsigned gpio3_a_1_pins[] = { AB8500_PIN_U9 };
+static const unsigned gpio4_a_1_pins[] = { AB8500_PIN_W2 };
+static const unsigned gpio6_a_1_pins[] = { AB8500_PIN_Y18 };
+static const unsigned gpio7_a_1_pins[] = { AB8500_PIN_AA20 };
+static const unsigned gpio8_a_1_pins[] = { AB8500_PIN_W18 };
+static const unsigned gpio9_a_1_pins[] = { AB8500_PIN_AA19 };
+/* YCbCr4 YCbCr5 YCbCr6 YCbCr7*/
+static const unsigned ycbcr4567_a_1_pins[] = { AB8500_PIN_U17, AB8500_PIN_AA18,
+ AB8500_PIN_U16, AB8500_PIN_W17};
+static const unsigned gpio14_a_1_pins[] = { AB8500_PIN_F14 };
+static const unsigned gpio15_a_1_pins[] = { AB8500_PIN_B17 };
+static const unsigned gpio16_a_1_pins[] = { AB8500_PIN_F15 };
+static const unsigned gpio17_a_1_pins[] = { AB8500_PIN_P5 };
+static const unsigned gpio18_a_1_pins[] = { AB8500_PIN_R5 };
+static const unsigned gpio19_a_1_pins[] = { AB8500_PIN_U5 };
+static const unsigned gpio20_a_1_pins[] = { AB8500_PIN_T5 };
+static const unsigned gpio21_a_1_pins[] = { AB8500_PIN_H19 };
+static const unsigned gpio22_a_1_pins[] = { AB8500_PIN_G20 };
+static const unsigned gpio23_a_1_pins[] = { AB8500_PIN_G19 };
+static const unsigned gpio24_a_1_pins[] = { AB8500_PIN_T14 };
+static const unsigned gpio25_a_1_pins[] = { AB8500_PIN_R16 };
+static const unsigned gpio27_a_1_pins[] = { AB8500_PIN_J6 };
+static const unsigned gpio28_a_1_pins[] = { AB8500_PIN_K6 };
+static const unsigned gpio29_a_1_pins[] = { AB8500_PIN_G6 };
+static const unsigned gpio30_a_1_pins[] = { AB8500_PIN_H6 };
+static const unsigned gpio31_a_1_pins[] = { AB8500_PIN_F5 };
+static const unsigned gpio32_a_1_pins[] = { AB8500_PIN_G5 };
+static const unsigned gpio34_a_1_pins[] = { AB8500_PIN_R17 };
+static const unsigned gpio36_a_1_pins[] = { AB8500_PIN_A17 };
+static const unsigned gpio37_a_1_pins[] = { AB8500_PIN_E15 };
+static const unsigned gpio38_a_1_pins[] = { AB8500_PIN_C17 };
+static const unsigned gpio39_a_1_pins[] = { AB8500_PIN_E16 };
+static const unsigned gpio40_a_1_pins[] = { AB8500_PIN_T19 };
+static const unsigned gpio41_a_1_pins[] = { AB8500_PIN_U19 };
+static const unsigned gpio42_a_1_pins[] = { AB8500_PIN_U2 };
+
+/* Altfunction B colum */
+static const unsigned hiqclkena_b_1_pins[] = { AB8500_PIN_U17 };
+static const unsigned usbuiccpd_b_1_pins[] = { AB8500_PIN_AA18 };
+static const unsigned i2ctrig1_b_1_pins[] = { AB8500_PIN_U16 };
+static const unsigned i2ctrig2_b_1_pins[] = { AB8500_PIN_W17 };
+
+/* Altfunction C column */
+static const unsigned usbvdat_c_1_pins[] = { AB8500_PIN_W17 };
+
+
+#define AB8500_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \
+ .npins = ARRAY_SIZE(a##_pins), .altsetting = b }
+
+static const struct abx500_pingroup ab8500_groups[] = {
+ /* default column */
+ AB8500_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq6_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(ycbcr0123_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio12_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(pwmout2_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(pwmout3_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(adi1_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(usbuicc_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq7_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq8_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio26_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(dmic12_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(dmic34_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(dmic56_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(gpio35_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(apespi_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT),
+ AB8500_PIN_GROUP(sysclkreq5_d_1, ABX500_DEFAULT),
+ /* Altfunction A column */
+ AB8500_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio4_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio6_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio7_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio8_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio9_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(ycbcr4567_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio15_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio16_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio21_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio22_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio23_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio24_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio25_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio27_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio28_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio29_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio30_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio31_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio32_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio34_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio36_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio37_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio38_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio39_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio40_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio41_a_1, ABX500_ALT_A),
+ AB8500_PIN_GROUP(gpio42_a_1, ABX500_ALT_A),
+ /* Altfunction B column */
+ AB8500_PIN_GROUP(hiqclkena_b_1, ABX500_ALT_B),
+ AB8500_PIN_GROUP(usbuiccpd_b_1, ABX500_ALT_B),
+ AB8500_PIN_GROUP(i2ctrig1_b_1, ABX500_ALT_B),
+ AB8500_PIN_GROUP(i2ctrig2_b_1, ABX500_ALT_B),
+ /* Altfunction C column */
+ AB8500_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C),
+};
+
+/* We use this macro to define the groups applicable to a function */
+#define AB8500_FUNC_GROUPS(a, b...) \
+static const char * const a##_groups[] = { b };
+
+AB8500_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
+ "sysclkreq4_d_1", "sysclkreq5_d_1", "sysclkreq6_d_1",
+ "sysclkreq7_d_1", "sysclkreq8_d_1");
+AB8500_FUNC_GROUPS(ycbcr, "ycbcr0123_d_1", "ycbcr4567_a_1");
+AB8500_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", "gpio4_a_1",
+ "gpio6_a_1", "gpio7_a_1", "gpio8_a_1", "gpio9_a_1",
+ "gpio10_d_1", "gpio11_d_1", "gpio12_d_1", "gpio13_d_1",
+ "gpio14_a_1", "gpio15_a_1", "gpio16_a_1", "gpio17_a_1",
+ "gpio18_a_1", "gpio19_a_1", "gpio20_a_1", "gpio21_a_1",
+ "gpio22_a_1", "gpio23_a_1", "gpio24_a_1", "gpio25_a_1",
+ "gpio26_d_1", "gpio27_a_1", "gpio28_a_1", "gpio29_a_1",
+ "gpio30_a_1", "gpio31_a_1", "gpio32_a_1", "gpio34_a_1",
+ "gpio35_d_1", "gpio36_a_1", "gpio37_a_1", "gpio38_a_1",
+ "gpio39_a_1", "gpio40_a_1", "gpio41_a_1", "gpio42_a_1");
+AB8500_FUNC_GROUPS(pwmout, "pwmout1_d_1", "pwmout2_d_1", "pwmout3_d_1");
+AB8500_FUNC_GROUPS(adi1, "adi1_d_1");
+AB8500_FUNC_GROUPS(usbuicc, "usbuicc_d_1", "usbuiccpd_b_1");
+AB8500_FUNC_GROUPS(dmic, "dmic12_d_1", "dmic34_d_1", "dmic56_d_1");
+AB8500_FUNC_GROUPS(extcpena, "extcpena_d_1");
+AB8500_FUNC_GROUPS(apespi, "apespi_d_1");
+AB8500_FUNC_GROUPS(modsclsda, "modsclsda_d_1");
+AB8500_FUNC_GROUPS(hiqclkena, "hiqclkena_b_1");
+AB8500_FUNC_GROUPS(i2ctrig, "i2ctrig1_b_1", "i2ctrig2_b_1");
+AB8500_FUNC_GROUPS(usbvdat, "usbvdat_c_1");
+
+#define FUNCTION(fname) \
+ { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+static const struct abx500_function ab8500_functions[] = {
+ FUNCTION(sysclkreq),
+ FUNCTION(ycbcr),
+ FUNCTION(gpio),
+ FUNCTION(pwmout),
+ FUNCTION(adi1),
+ FUNCTION(usbuicc),
+ FUNCTION(dmic),
+ FUNCTION(extcpena),
+ FUNCTION(apespi),
+ FUNCTION(modsclsda),
+ FUNCTION(hiqclkena),
+ FUNCTION(i2ctrig),
+ FUNCTION(usbvdat),
+};
+
+/*
+ * this table translates what's is in the AB8500 specification regarding the
+ * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
+ * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1,
+ * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
+ *
+ * example :
+ *
+ * ALTERNATE_FUNCTIONS(13, 4, 3, 4, 0, 1 ,2),
+ * means that pin AB8500_PIN_W17 (pin 13) supports 4 mux (default/ALT_A,
+ * ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to
+ * select the mux. ALTA, ALTB and ALTC val indicates values to write in
+ * ALTERNATFUNC register. We need to specifies these values as SOC
+ * designers didn't apply the same logic on how to select mux in the
+ * ABx500 family.
+ *
+ * As this pins supports at least ALT_B mux, default mux is
+ * selected by writing 1 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3
+ * default | 1 | 0 | 0
+ * alt_A | 0 | 0 | 0
+ * alt_B | 0 | 0 | 1
+ * alt_C | 0 | 1 | 0
+ *
+ * ALTERNATE_FUNCTIONS(8, 7, UNUSED, UNUSED),
+ * means that pin AB8500_PIN_W18 (pin 8) supports 2 mux, so only GPIOSEL
+ * register is used to select the mux. As this pins doesn't support at
+ * least ALT_B mux, default mux is by writing 0 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=7 | alternatfunc bit2= | alternatfunc bit1=
+ * default | 0 | 0 | 0
+ * alt_A | 1 | 0 | 0
+ */
+
+struct alternate_functions ab8500_alternate_functions[AB8500_GPIO_MAX_NUMBER + 1] = {
+ ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
+ ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
+ ALTERNATE_FUNCTIONS(4, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO4, altA controlled by bit 3*/
+ /* bit 4 reserved */
+ ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5 */
+ ALTERNATE_FUNCTIONS(6, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO6, altA controlled by bit 5*/
+ ALTERNATE_FUNCTIONS(7, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO7, altA controlled by bit 6*/
+ ALTERNATE_FUNCTIONS(8, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO8, altA controlled by bit 7*/
+
+ ALTERNATE_FUNCTIONS(9, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO9, altA controlled by bit 0*/
+ ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 0, 1, 0), /* GPIO10, altA and altB controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(11, 2, 1, UNUSED, 0, 1, 0), /* GPIO11, altA and altB controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(12, 3, 2, UNUSED, 0, 1, 0), /* GPIO12, altA and altB controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(13, 4, 3, 4, 0, 1, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */
+ ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(15, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO15, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(16, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO16, altA controlled by bit 7 */
+ /*
+ * pins 17 to 20 are special case, only bit 0 is used to select
+ * alternate function for these 4 pins.
+ * bits 1 to 3 are reserved
+ */
+ ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(21, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO21, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(22, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO22, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(23, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO23, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(24, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO24, altA controlled by bit 7 */
+
+ ALTERNATE_FUNCTIONS(25, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO25, altA controlled by bit 0 */
+ /* pin 26 special case, no alternate function, bit 1 reserved */
+ ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* GPIO26 */
+ ALTERNATE_FUNCTIONS(27, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO27, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(28, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO28, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(29, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO29, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(30, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO30, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(31, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO31, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(32, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO32, altA controlled by bit 7 */
+
+ ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33 */
+ ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */
+ /* pin 35 special case, no alternate function, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* GPIO35 */
+ ALTERNATE_FUNCTIONS(36, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO36, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(37, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO37, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(38, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO38, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(39, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO39, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7 */
+
+ ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(42, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO42, altA controlled by bit 1 */
+};
+
+/*
+ * Only some GPIOs are interrupt capable, and they are
+ * organized in discontiguous clusters:
+ *
+ * GPIO6 to GPIO13
+ * GPIO24 and GPIO25
+ * GPIO36 to GPIO41
+ */
+struct abx500_gpio_irq_cluster ab8500_gpio_irq_cluster[] = {
+ GPIO_IRQ_CLUSTER(5, 12, 0), /* GPIO numbers start from 1 */
+ GPIO_IRQ_CLUSTER(23, 24, 0),
+ GPIO_IRQ_CLUSTER(35, 40, 0),
+};
+
+static struct abx500_pinctrl_soc_data ab8500_soc = {
+ .gpio_ranges = ab8500_pinranges,
+ .gpio_num_ranges = ARRAY_SIZE(ab8500_pinranges),
+ .pins = ab8500_pins,
+ .npins = ARRAY_SIZE(ab8500_pins),
+ .functions = ab8500_functions,
+ .nfunctions = ARRAY_SIZE(ab8500_functions),
+ .groups = ab8500_groups,
+ .ngroups = ARRAY_SIZE(ab8500_groups),
+ .alternate_functions = ab8500_alternate_functions,
+ .gpio_irq_cluster = ab8500_gpio_irq_cluster,
+ .ngpio_irq_cluster = ARRAY_SIZE(ab8500_gpio_irq_cluster),
+ .irq_gpio_rising_offset = AB8500_INT_GPIO6R,
+ .irq_gpio_falling_offset = AB8500_INT_GPIO6F,
+ .irq_gpio_factor = 1,
+};
+
+void abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
+{
+ *soc = &ab8500_soc;
+}
diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c
index 9eed988..215dbb4 100644
--- a/drivers/pinctrl/pinctrl-abx500.c
+++ b/drivers/pinctrl/pinctrl-abx500.c
@@ -1116,6 +1116,9 @@ static int abx500_gpio_probe(struct platform_device *pdev)
/* Poke in other ASIC variants here */
switch (platid->driver_data) {
+ case PINCTRL_AB8500:
+ abx500_pinctrl_ab8500_init(&pct->soc);
+ break;
default:
dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n",
(int) platid->driver_data);
diff --git a/drivers/pinctrl/pinctrl-abx500.h b/drivers/pinctrl/pinctrl-abx500.h
index 436ace3..a6c9332 100644
--- a/drivers/pinctrl/pinctrl-abx500.h
+++ b/drivers/pinctrl/pinctrl-abx500.h
@@ -177,4 +177,17 @@ struct abx500_pinctrl_soc_data {
int irq_gpio_factor;
};
+#ifdef CONFIG_PINCTRL_AB8500
+
+void abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc);
+
+#else
+
+static inline void
+abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
+{
+}
+
+#endif
+
#endif /* PINCTRL_PINCTRL_ABx500_H */
--
1.7.11.3
^ permalink raw reply related
* [PATCH 2/5] pinctrl/abx500: add AB8505 sub-driver
From: Linus Walleij @ 2013-01-28 13:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Patrice Chotard <patrice.chotard@stericsson.com>
Add AB8505 sub driver to the ABx5x family.
As the pin controller (also the ABx500 controllers) is an
inherent part of the SoC and will prevent boot if not
available, select this from the Ux500 SoC Kconfig.
Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Request an ACK from the ARM SoC maintainers for this patch.
---
arch/arm/mach-ux500/Kconfig | 1 +
drivers/pinctrl/Kconfig | 4 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-ab8505.c | 380 +++++++++++++++++++++++++++++++++++++++
drivers/pinctrl/pinctrl-abx500.c | 3 +
drivers/pinctrl/pinctrl-abx500.h | 13 ++
6 files changed, 402 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-ab8505.c
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 31f1b5a..5279459 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -20,6 +20,7 @@ config UX500_SOC_DB8500
select MFD_DB8500_PRCMU
select PINCTRL_DB8500
select PINCTRL_AB8500
+ select PINCTRL_AB8505
select REGULATOR
select REGULATOR_DB8500_PRCMU
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 367556f..e7db9fa 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -37,6 +37,10 @@ config PINCTRL_AB8500
bool "AB8500 pin controller driver"
depends on PINCTRL_ABX500 && ARCH_U8500
+config PINCTRL_AB8505
+ bool "AB8505 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
config PINCTRL_AT91
bool "AT91 pinctrl driver"
depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index aad5c93..2cc0115 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -11,6 +11,7 @@ endif
obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o
obj-$(CONFIG_PINCTRL_ABX500) += pinctrl-abx500.o
obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o
+obj-$(CONFIG_PINCTRL_AB8505) += pinctrl-ab8505.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o
diff --git a/drivers/pinctrl/pinctrl-ab8505.c b/drivers/pinctrl/pinctrl-ab8505.c
new file mode 100644
index 0000000..56acd16
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ab8505.c
@@ -0,0 +1,380 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include "pinctrl-abx500.h"
+
+/* All the pins that can be used for GPIO and some other functions */
+#define ABX500_GPIO(offset) (offset)
+
+#define AB8505_PIN_N4 ABX500_GPIO(1)
+#define AB8505_PIN_R5 ABX500_GPIO(2)
+#define AB8505_PIN_P5 ABX500_GPIO(3)
+/* hole */
+#define AB8505_PIN_B16 ABX500_GPIO(10)
+#define AB8505_PIN_B17 ABX500_GPIO(11)
+/* hole */
+#define AB8505_PIN_D17 ABX500_GPIO(13)
+#define AB8505_PIN_C16 ABX500_GPIO(14)
+/* hole */
+#define AB8505_PIN_P2 ABX500_GPIO(17)
+#define AB8505_PIN_N3 ABX500_GPIO(18)
+#define AB8505_PIN_T1 ABX500_GPIO(19)
+#define AB8505_PIN_P3 ABX500_GPIO(20)
+/* hole */
+#define AB8505_PIN_H14 ABX500_GPIO(34)
+/* hole */
+#define AB8505_PIN_J15 ABX500_GPIO(40)
+#define AB8505_PIN_J14 ABX500_GPIO(41)
+/* hole */
+#define AB8505_PIN_L4 ABX500_GPIO(50)
+/* hole */
+#define AB8505_PIN_D16 ABX500_GPIO(52)
+#define AB8505_PIN_D15 ABX500_GPIO(53)
+
+/* indicates the higher GPIO number */
+#define AB8505_GPIO_MAX_NUMBER 53
+
+/*
+ * The names of the pins are denoted by GPIO number and ball name, even
+ * though they can be used for other things than GPIO, this is the first
+ * column in the table of the data sheet and often used on schematics and
+ * such.
+ */
+static const struct pinctrl_pin_desc ab8505_pins[] = {
+ PINCTRL_PIN(AB8505_PIN_N4, "GPIO1_N4"),
+ PINCTRL_PIN(AB8505_PIN_R5, "GPIO2_R5"),
+ PINCTRL_PIN(AB8505_PIN_P5, "GPIO3_P5"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_B16, "GPIO10_B16"),
+ PINCTRL_PIN(AB8505_PIN_B17, "GPIO11_B17"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_D17, "GPIO13_D17"),
+ PINCTRL_PIN(AB8505_PIN_C16, "GPIO14_C16"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_P2, "GPIO17_P2"),
+ PINCTRL_PIN(AB8505_PIN_N3, "GPIO18_N3"),
+ PINCTRL_PIN(AB8505_PIN_T1, "GPIO19_T1"),
+ PINCTRL_PIN(AB8505_PIN_P3, "GPIO20_P3"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_H14, "GPIO34_H14"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_J15, "GPIO40_J15"),
+ PINCTRL_PIN(AB8505_PIN_J14, "GPIO41_J14"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_L4, "GPIO50_L4"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_D16, "GPIO52_D16"),
+ PINCTRL_PIN(AB8505_PIN_D15, "GPIO53_D15"),
+};
+
+/*
+ * Maps local GPIO offsets to local pin numbers
+ */
+static const struct abx500_pinrange ab8505_pinranges[] = {
+ ABX500_PINRANGE(1, 3, ABX500_ALT_A),
+ ABX500_PINRANGE(10, 2, ABX500_DEFAULT),
+ ABX500_PINRANGE(13, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(14, 1, ABX500_ALT_A),
+ ABX500_PINRANGE(17, 4, ABX500_ALT_A),
+ ABX500_PINRANGE(34, 1, ABX500_ALT_A),
+ ABX500_PINRANGE(40, 2, ABX500_ALT_A),
+ ABX500_PINRANGE(50, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(52, 2, ABX500_ALT_A),
+};
+
+/*
+ * Read the pin group names like this:
+ * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
+ *
+ * The groups are arranged as sets per altfunction column, so we can
+ * mux in one group at a time by selecting the same altfunction for them
+ * all. When functions require pins on different altfunctions, you need
+ * to combine several groups.
+ */
+
+/* default column */
+static const unsigned sysclkreq2_d_1_pins[] = { AB8505_PIN_N4 };
+static const unsigned sysclkreq3_d_1_pins[] = { AB8505_PIN_R5 };
+static const unsigned sysclkreq4_d_1_pins[] = { AB8505_PIN_P5 };
+static const unsigned gpio10_d_1_pins[] = { AB8505_PIN_B16 };
+static const unsigned gpio11_d_1_pins[] = { AB8505_PIN_B17 };
+static const unsigned gpio13_d_1_pins[] = { AB8505_PIN_D17 };
+static const unsigned pwmout1_d_1_pins[] = { AB8505_PIN_C16 };
+/* audio data interface 2*/
+static const unsigned adi2_d_1_pins[] = { AB8505_PIN_P2, AB8505_PIN_N3,
+ AB8505_PIN_T1, AB8505_PIN_P3 };
+static const unsigned extcpena_d_1_pins[] = { AB8505_PIN_H14 };
+/* modem SDA/SCL */
+static const unsigned modsclsda_d_1_pins[] = { AB8505_PIN_J15, AB8505_PIN_J14 };
+static const unsigned gpio50_d_1_pins[] = { AB8505_PIN_L4 };
+static const unsigned resethw_d_1_pins[] = { AB8505_PIN_D16 };
+static const unsigned service_d_1_pins[] = { AB8505_PIN_D15 };
+
+/* Altfunction A column */
+static const unsigned gpio1_a_1_pins[] = { AB8505_PIN_N4 };
+static const unsigned gpio2_a_1_pins[] = { AB8505_PIN_R5 };
+static const unsigned gpio3_a_1_pins[] = { AB8505_PIN_P5 };
+static const unsigned hiqclkena_a_1_pins[] = { AB8505_PIN_B16 };
+static const unsigned pdmclk_a_1_pins[] = { AB8505_PIN_B17 };
+static const unsigned uarttxdata_a_1_pins[] = { AB8505_PIN_D17 };
+static const unsigned gpio14_a_1_pins[] = { AB8505_PIN_C16 };
+static const unsigned gpio17_a_1_pins[] = { AB8505_PIN_P2 };
+static const unsigned gpio18_a_1_pins[] = { AB8505_PIN_N3 };
+static const unsigned gpio19_a_1_pins[] = { AB8505_PIN_T1 };
+static const unsigned gpio20_a_1_pins[] = { AB8505_PIN_P3 };
+static const unsigned gpio34_a_1_pins[] = { AB8505_PIN_H14 };
+static const unsigned gpio40_a_1_pins[] = { AB8505_PIN_J15 };
+static const unsigned gpio41_a_1_pins[] = { AB8505_PIN_J14 };
+static const unsigned uartrxdata_a_1_pins[] = { AB8505_PIN_J14 };
+static const unsigned gpio50_a_1_pins[] = { AB8505_PIN_L4 };
+static const unsigned gpio52_a_1_pins[] = { AB8505_PIN_D16 };
+static const unsigned gpio53_a_1_pins[] = { AB8505_PIN_D15 };
+
+/* Altfunction B colum */
+static const unsigned pdmdata_b_1_pins[] = { AB8505_PIN_B16 };
+static const unsigned extvibrapwm1_b_1_pins[] = { AB8505_PIN_D17 };
+static const unsigned extvibrapwm2_b_1_pins[] = { AB8505_PIN_L4 };
+
+/* Altfunction C column */
+static const unsigned usbvdat_c_1_pins[] = { AB8505_PIN_D17 };
+
+#define AB8505_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \
+ .npins = ARRAY_SIZE(a##_pins), .altsetting = b }
+
+static const struct abx500_pingroup ab8505_groups[] = {
+ AB8505_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(adi2_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio50_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(resethw_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(service_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(hiqclkena_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(pdmclk_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(uarttxdata_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio34_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio40_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio41_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(uartrxdata_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio52_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio53_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(pdmdata_b_1, ABX500_ALT_B),
+ AB8505_PIN_GROUP(extvibrapwm1_b_1, ABX500_ALT_B),
+ AB8505_PIN_GROUP(extvibrapwm2_b_1, ABX500_ALT_B),
+ AB8505_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C),
+};
+
+/* We use this macro to define the groups applicable to a function */
+#define AB8505_FUNC_GROUPS(a, b...) \
+static const char * const a##_groups[] = { b };
+
+AB8505_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
+ "sysclkreq4_d_1");
+AB8505_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1",
+ "gpio10_d_1", "gpio11_d_1", "gpio13_d_1", "gpio14_a_1",
+ "gpio17_a_1", "gpio18_a_1", "gpio19_a_1", "gpio20_a_1",
+ "gpio34_a_1", "gpio40_a_1", "gpio41_a_1", "gpio50_d_1",
+ "gpio52_a_1", "gpio53_a_1");
+AB8505_FUNC_GROUPS(pwmout, "pwmout1_d_1");
+AB8505_FUNC_GROUPS(adi2, "adi2_d_1");
+AB8505_FUNC_GROUPS(extcpena, "extcpena_d_1");
+AB8505_FUNC_GROUPS(modsclsda, "modsclsda_d_1");
+AB8505_FUNC_GROUPS(resethw, "resethw_d_1");
+AB8505_FUNC_GROUPS(service, "service_d_1");
+AB8505_FUNC_GROUPS(hiqclkena, "hiqclkena_a_1");
+AB8505_FUNC_GROUPS(pdm, "pdmclk_a_1", "pdmdata_b_1");
+AB8505_FUNC_GROUPS(uartdata, "uarttxdata_a_1", "uartrxdata_a_1");
+AB8505_FUNC_GROUPS(extvibra, "extvibrapwm1_b_1", "extvibrapwm2_b_1");
+AB8505_FUNC_GROUPS(usbvdat, "usbvdat_c_1");
+
+#define FUNCTION(fname) \
+ { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+static const struct abx500_function ab8505_functions[] = {
+ FUNCTION(sysclkreq),
+ FUNCTION(gpio),
+ FUNCTION(pwmout),
+ FUNCTION(adi2),
+ FUNCTION(extcpena),
+ FUNCTION(modsclsda),
+ FUNCTION(resethw),
+ FUNCTION(service),
+ FUNCTION(hiqclkena),
+ FUNCTION(pdm),
+ FUNCTION(uartdata),
+ FUNCTION(extvibra),
+ FUNCTION(extvibra),
+ FUNCTION(usbvdat),
+};
+
+/*
+ * this table translates what's is in the AB8505 specification regarding the
+ * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
+ * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1,
+ * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
+ *
+ * example :
+ *
+ * ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2),
+ * means that pin AB8505_PIN_D18 (pin 13) supports 4 mux (default/ALT_A,
+ * ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to
+ * select the mux. ALTA, ALTB and ALTC val indicates values to write in
+ * ALTERNATFUNC register. We need to specifies these values as SOC
+ * designers didn't apply the same logic on how to select mux in the
+ * ABx500 family.
+ *
+ * As this pins supports at least ALT_B mux, default mux is
+ * selected by writing 1 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3
+ * default | 1 | 0 | 0
+ * alt_A | 0 | 0 | 1
+ * alt_B | 0 | 0 | 0
+ * alt_C | 0 | 1 | 0
+ *
+ * ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED),
+ * means that pin AB9540_PIN_R4 (pin 1) supports 2 mux, so only GPIOSEL
+ * register is used to select the mux. As this pins doesn't support at
+ * least ALT_B mux, default mux is by writing 0 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=0 | alternatfunc bit2= | alternatfunc bit1=
+ * default | 0 | 0 | 0
+ * alt_A | 1 | 0 | 0
+ */
+
+struct alternate_functions ab8505_alternate_functions[AB8505_GPIO_MAX_NUMBER + 1] = {
+ ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
+ ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
+ ALTERNATE_FUNCTIONS(4, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO4, bit 3 reserved */
+ ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5, bit 4 reserved */
+ ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6, bit 5 reserved */
+ ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8, bit 7 reserved */
+
+ ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(11, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12, bit3 reseved */
+ ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */
+ ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(15, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(16, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 7 reserved */
+ /*
+ * pins 17 to 20 are special case, only bit 0 is used to select
+ * alternate function for these 4 pins.
+ * bits 1 to 3 are reserved
+ */
+ ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(21, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO21, bit 4 reserved */
+ ALTERNATE_FUNCTIONS(22, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO22, bit 5 reserved */
+ ALTERNATE_FUNCTIONS(23, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO23, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(24, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO24, bit 7 reserved */
+
+ ALTERNATE_FUNCTIONS(25, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO25, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26, bit 1 reserved */
+ ALTERNATE_FUNCTIONS(27, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO27, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(28, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO28, bit 3 reserved */
+ ALTERNATE_FUNCTIONS(29, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO29, bit 4 reserved */
+ ALTERNATE_FUNCTIONS(30, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO30, bit 5 reserved */
+ ALTERNATE_FUNCTIONS(31, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO31, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(32, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO32, bit 7 reserved */
+
+ ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7*/
+
+ ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(42, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO42, bit 1 reserved */
+ ALTERNATE_FUNCTIONS(43, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO43, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(44, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO44, bit 3 reserved */
+ ALTERNATE_FUNCTIONS(45, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO45, bit 4 reserved */
+ ALTERNATE_FUNCTIONS(46, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO46, bit 5 reserved */
+ ALTERNATE_FUNCTIONS(47, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO47, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(48, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO48, bit 7 reserved */
+
+ ALTERNATE_FUNCTIONS(49, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(50, 1, 2, UNUSED, 1, 0, 0), /* GPIO50, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(51, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(52, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(53, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */
+};
+
+/*
+ * For AB8505 Only some GPIOs are interrupt capable, and they are
+ * organized in discontiguous clusters:
+ *
+ * GPIO10 to GPIO11
+ * GPIO13
+ * GPIO40 and GPIO41
+ * GPIO50
+ * GPIO52 to GPIO53
+ */
+struct abx500_gpio_irq_cluster ab8505_gpio_irq_cluster[] = {
+ GPIO_IRQ_CLUSTER(9, 10, 0), /* GPIO numbers start from 1 */
+ GPIO_IRQ_CLUSTER(12, 12, 0),
+ GPIO_IRQ_CLUSTER(39, 40, 0),
+ GPIO_IRQ_CLUSTER(49, 49, 0),
+ GPIO_IRQ_CLUSTER(51, 52, 0),
+};
+
+static struct abx500_pinctrl_soc_data ab8505_soc = {
+ .gpio_ranges = ab8505_pinranges,
+ .gpio_num_ranges = ARRAY_SIZE(ab8505_pinranges),
+ .pins = ab8505_pins,
+ .npins = ARRAY_SIZE(ab8505_pins),
+ .functions = ab8505_functions,
+ .nfunctions = ARRAY_SIZE(ab8505_functions),
+ .groups = ab8505_groups,
+ .ngroups = ARRAY_SIZE(ab8505_groups),
+ .alternate_functions = ab8505_alternate_functions,
+ .gpio_irq_cluster = ab8505_gpio_irq_cluster,
+ .ngpio_irq_cluster = ARRAY_SIZE(ab8505_gpio_irq_cluster),
+ .irq_gpio_rising_offset = AB8500_INT_GPIO6R,
+ .irq_gpio_falling_offset = AB8500_INT_GPIO6F,
+ .irq_gpio_factor = 1,
+};
+
+void __devinit
+abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc)
+{
+ *soc = &ab8505_soc;
+}
diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c
index 215dbb4..94f9381 100644
--- a/drivers/pinctrl/pinctrl-abx500.c
+++ b/drivers/pinctrl/pinctrl-abx500.c
@@ -1119,6 +1119,9 @@ static int abx500_gpio_probe(struct platform_device *pdev)
case PINCTRL_AB8500:
abx500_pinctrl_ab8500_init(&pct->soc);
break;
+ case PINCTRL_AB8505:
+ abx500_pinctrl_ab8505_init(&pct->soc);
+ break;
default:
dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n",
(int) platid->driver_data);
diff --git a/drivers/pinctrl/pinctrl-abx500.h b/drivers/pinctrl/pinctrl-abx500.h
index a6c9332..5c5ac75 100644
--- a/drivers/pinctrl/pinctrl-abx500.h
+++ b/drivers/pinctrl/pinctrl-abx500.h
@@ -190,4 +190,17 @@ abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
#endif
+#ifdef CONFIG_PINCTRL_AB8505
+
+void abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc);
+
+#else
+
+static inline void
+abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc)
+{
+}
+
+#endif
+
#endif /* PINCTRL_PINCTRL_ABx500_H */
--
1.7.11.3
^ permalink raw reply related
* [PATCH 3/5] pinctrl/abx500: add AB9540 sub-driver
From: Linus Walleij @ 2013-01-28 13:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Patrice Chotard <patrice.chotard@stericsson.com>
Add AB9540 sub driver to the ABx500 family, pins, pin groups and
gpio range.
As the pin controller (also the ABx500 controllers) is an
inherent part of the SoC and will prevent boot if not
available, select this from the Ux500 SoC Kconfig.
Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Request an ACK from the ARM SoC maintainers for this patch.
---
arch/arm/mach-ux500/Kconfig | 1 +
drivers/pinctrl/Kconfig | 4 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-ab9540.c | 485 +++++++++++++++++++++++++++++++++++++++
drivers/pinctrl/pinctrl-abx500.c | 3 +
drivers/pinctrl/pinctrl-abx500.h | 13 ++
6 files changed, 507 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-ab9540.c
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 5279459..9434063 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -21,6 +21,7 @@ config UX500_SOC_DB8500
select PINCTRL_DB8500
select PINCTRL_AB8500
select PINCTRL_AB8505
+ select PINCTRL_AB9540
select REGULATOR
select REGULATOR_DB8500_PRCMU
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index e7db9fa..aea4ceb 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -37,6 +37,10 @@ config PINCTRL_AB8500
bool "AB8500 pin controller driver"
depends on PINCTRL_ABX500 && ARCH_U8500
+config PINCTRL_AB9540
+ bool "AB9540 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
config PINCTRL_AB8505
bool "AB8505 pin controller driver"
depends on PINCTRL_ABX500 && ARCH_U8500
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 2cc0115..e866b79 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -11,6 +11,7 @@ endif
obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o
obj-$(CONFIG_PINCTRL_ABX500) += pinctrl-abx500.o
obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o
+obj-$(CONFIG_PINCTRL_AB9540) += pinctrl-ab9540.o
obj-$(CONFIG_PINCTRL_AB8505) += pinctrl-ab8505.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
diff --git a/drivers/pinctrl/pinctrl-ab9540.c b/drivers/pinctrl/pinctrl-ab9540.c
new file mode 100644
index 0000000..7b66f30
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ab9540.c
@@ -0,0 +1,485 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include "pinctrl-abx500.h"
+
+/* All the pins that can be used for GPIO and some other functions */
+#define ABX500_GPIO(offset) (offset)
+
+#define AB9540_PIN_R4 ABX500_GPIO(1)
+#define AB9540_PIN_V3 ABX500_GPIO(2)
+#define AB9540_PIN_T4 ABX500_GPIO(3)
+#define AB9540_PIN_T5 ABX500_GPIO(4)
+/* hole */
+#define AB9540_PIN_B18 ABX500_GPIO(10)
+#define AB9540_PIN_C18 ABX500_GPIO(11)
+/* hole */
+#define AB9540_PIN_D18 ABX500_GPIO(13)
+#define AB9540_PIN_B19 ABX500_GPIO(14)
+#define AB9540_PIN_C19 ABX500_GPIO(15)
+#define AB9540_PIN_D19 ABX500_GPIO(16)
+#define AB9540_PIN_R3 ABX500_GPIO(17)
+#define AB9540_PIN_T2 ABX500_GPIO(18)
+#define AB9540_PIN_U2 ABX500_GPIO(19)
+#define AB9540_PIN_V2 ABX500_GPIO(20)
+#define AB9540_PIN_N17 ABX500_GPIO(21)
+#define AB9540_PIN_N16 ABX500_GPIO(22)
+#define AB9540_PIN_M19 ABX500_GPIO(23)
+#define AB9540_PIN_T3 ABX500_GPIO(24)
+#define AB9540_PIN_W2 ABX500_GPIO(25)
+/* hole */
+#define AB9540_PIN_H4 ABX500_GPIO(27)
+#define AB9540_PIN_F1 ABX500_GPIO(28)
+#define AB9540_PIN_F4 ABX500_GPIO(29)
+#define AB9540_PIN_F2 ABX500_GPIO(30)
+#define AB9540_PIN_E4 ABX500_GPIO(31)
+#define AB9540_PIN_F3 ABX500_GPIO(32)
+/* hole */
+#define AB9540_PIN_J13 ABX500_GPIO(34)
+/* hole */
+#define AB9540_PIN_L17 ABX500_GPIO(40)
+#define AB9540_PIN_L16 ABX500_GPIO(41)
+#define AB9540_PIN_W3 ABX500_GPIO(42)
+#define AB9540_PIN_N4 ABX500_GPIO(50)
+#define AB9540_PIN_G12 ABX500_GPIO(51)
+#define AB9540_PIN_E17 ABX500_GPIO(52)
+#define AB9540_PIN_D11 ABX500_GPIO(53)
+#define AB9540_PIN_M18 ABX500_GPIO(54)
+
+/* indicates the highest GPIO number */
+#define AB9540_GPIO_MAX_NUMBER 54
+
+/*
+ * The names of the pins are denoted by GPIO number and ball name, even
+ * though they can be used for other things than GPIO, this is the first
+ * column in the table of the data sheet and often used on schematics and
+ * such.
+ */
+static const struct pinctrl_pin_desc ab9540_pins[] = {
+ PINCTRL_PIN(AB9540_PIN_R4, "GPIO1_R4"),
+ PINCTRL_PIN(AB9540_PIN_V3, "GPIO2_V3"),
+ PINCTRL_PIN(AB9540_PIN_T4, "GPIO3_T4"),
+ PINCTRL_PIN(AB9540_PIN_T5, "GPIO4_T5"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_B18, "GPIO10_B18"),
+ PINCTRL_PIN(AB9540_PIN_C18, "GPIO11_C18"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_D18, "GPIO13_D18"),
+ PINCTRL_PIN(AB9540_PIN_B19, "GPIO14_B19"),
+ PINCTRL_PIN(AB9540_PIN_C19, "GPIO15_C19"),
+ PINCTRL_PIN(AB9540_PIN_D19, "GPIO16_D19"),
+ PINCTRL_PIN(AB9540_PIN_R3, "GPIO17_R3"),
+ PINCTRL_PIN(AB9540_PIN_T2, "GPIO18_T2"),
+ PINCTRL_PIN(AB9540_PIN_U2, "GPIO19_U2"),
+ PINCTRL_PIN(AB9540_PIN_V2, "GPIO20_V2"),
+ PINCTRL_PIN(AB9540_PIN_N17, "GPIO21_N17"),
+ PINCTRL_PIN(AB9540_PIN_N16, "GPIO22_N16"),
+ PINCTRL_PIN(AB9540_PIN_M19, "GPIO23_M19"),
+ PINCTRL_PIN(AB9540_PIN_T3, "GPIO24_T3"),
+ PINCTRL_PIN(AB9540_PIN_W2, "GPIO25_W2"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_H4, "GPIO27_H4"),
+ PINCTRL_PIN(AB9540_PIN_F1, "GPIO28_F1"),
+ PINCTRL_PIN(AB9540_PIN_F4, "GPIO29_F4"),
+ PINCTRL_PIN(AB9540_PIN_F2, "GPIO30_F2"),
+ PINCTRL_PIN(AB9540_PIN_E4, "GPIO31_E4"),
+ PINCTRL_PIN(AB9540_PIN_F3, "GPIO32_F3"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_J13, "GPIO34_J13"),
+ /* hole */
+ PINCTRL_PIN(AB9540_PIN_L17, "GPIO40_L17"),
+ PINCTRL_PIN(AB9540_PIN_L16, "GPIO41_L16"),
+ PINCTRL_PIN(AB9540_PIN_W3, "GPIO42_W3"),
+ PINCTRL_PIN(AB9540_PIN_N4, "GPIO50_N4"),
+ PINCTRL_PIN(AB9540_PIN_G12, "GPIO51_G12"),
+ PINCTRL_PIN(AB9540_PIN_E17, "GPIO52_E17"),
+ PINCTRL_PIN(AB9540_PIN_D11, "GPIO53_D11"),
+ PINCTRL_PIN(AB9540_PIN_M18, "GPIO60_M18"),
+};
+
+/*
+ * Maps local GPIO offsets to local pin numbers
+ */
+static const struct abx500_pinrange ab9540_pinranges[] = {
+ ABX500_PINRANGE(1, 4, ABX500_ALT_A),
+ ABX500_PINRANGE(10, 2, ABX500_DEFAULT),
+ ABX500_PINRANGE(13, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(14, 12, ABX500_ALT_A),
+ ABX500_PINRANGE(27, 6, ABX500_ALT_A),
+ ABX500_PINRANGE(34, 1, ABX500_ALT_A),
+ ABX500_PINRANGE(40, 3, ABX500_ALT_A),
+ ABX500_PINRANGE(50, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(51, 3, ABX500_ALT_A),
+ ABX500_PINRANGE(54, 1, ABX500_DEFAULT),
+};
+
+/*
+ * Read the pin group names like this:
+ * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
+ *
+ * The groups are arranged as sets per altfunction column, so we can
+ * mux in one group at a time by selecting the same altfunction for them
+ * all. When functions require pins on different altfunctions, you need
+ * to combine several groups.
+ */
+
+/* default column */
+static const unsigned sysclkreq2_d_1_pins[] = { AB9540_PIN_R4 };
+static const unsigned sysclkreq3_d_1_pins[] = { AB9540_PIN_V3 };
+static const unsigned sysclkreq4_d_1_pins[] = { AB9540_PIN_T4 };
+static const unsigned sysclkreq6_d_1_pins[] = { AB9540_PIN_T5 };
+static const unsigned gpio10_d_1_pins[] = { AB9540_PIN_B18 };
+static const unsigned gpio11_d_1_pins[] = { AB9540_PIN_C18 };
+static const unsigned gpio13_d_1_pins[] = { AB9540_PIN_D18 };
+static const unsigned pwmout1_d_1_pins[] = { AB9540_PIN_B19 };
+static const unsigned pwmout2_d_1_pins[] = { AB9540_PIN_C19 };
+static const unsigned pwmout3_d_1_pins[] = { AB9540_PIN_D19 };
+/* audio data interface 1*/
+static const unsigned adi1_d_1_pins[] = { AB9540_PIN_R3, AB9540_PIN_T2,
+ AB9540_PIN_U2, AB9540_PIN_V2 };
+/* USBUICC */
+static const unsigned usbuicc_d_1_pins[] = { AB9540_PIN_N17, AB9540_PIN_N16,
+ AB9540_PIN_M19 };
+static const unsigned sysclkreq7_d_1_pins[] = { AB9540_PIN_T3 };
+static const unsigned sysclkreq8_d_1_pins[] = { AB9540_PIN_W2 };
+/* Digital microphone 1 and 2 */
+static const unsigned dmic12_d_1_pins[] = { AB9540_PIN_H4, AB9540_PIN_F1 };
+/* Digital microphone 3 and 4 */
+static const unsigned dmic34_d_1_pins[] = { AB9540_PIN_F4, AB9540_PIN_F2 };
+/* Digital microphone 5 and 6 */
+static const unsigned dmic56_d_1_pins[] = { AB9540_PIN_E4, AB9540_PIN_F3 };
+static const unsigned extcpena_d_1_pins[] = { AB9540_PIN_J13 };
+/* modem SDA/SCL */
+static const unsigned modsclsda_d_1_pins[] = { AB9540_PIN_L17, AB9540_PIN_L16 };
+static const unsigned sysclkreq5_d_1_pins[] = { AB9540_PIN_W3 };
+static const unsigned gpio50_d_1_pins[] = { AB9540_PIN_N4 };
+static const unsigned batremn_d_1_pins[] = { AB9540_PIN_G12 };
+static const unsigned resethw_d_1_pins[] = { AB9540_PIN_E17 };
+static const unsigned service_d_1_pins[] = { AB9540_PIN_D11 };
+static const unsigned gpio60_d_1_pins[] = { AB9540_PIN_M18 };
+
+/* Altfunction A column */
+static const unsigned gpio1_a_1_pins[] = { AB9540_PIN_R4 };
+static const unsigned gpio2_a_1_pins[] = { AB9540_PIN_V3 };
+static const unsigned gpio3_a_1_pins[] = { AB9540_PIN_T4 };
+static const unsigned gpio4_a_1_pins[] = { AB9540_PIN_T5 };
+static const unsigned hiqclkena_a_1_pins[] = { AB9540_PIN_B18 };
+static const unsigned pdmclk_a_1_pins[] = { AB9540_PIN_C18 };
+static const unsigned uartdata_a_1_pins[] = { AB9540_PIN_D18, AB9540_PIN_N4 };
+static const unsigned gpio14_a_1_pins[] = { AB9540_PIN_B19 };
+static const unsigned gpio15_a_1_pins[] = { AB9540_PIN_C19 };
+static const unsigned gpio16_a_1_pins[] = { AB9540_PIN_D19 };
+static const unsigned gpio17_a_1_pins[] = { AB9540_PIN_R3 };
+static const unsigned gpio18_a_1_pins[] = { AB9540_PIN_T2 };
+static const unsigned gpio19_a_1_pins[] = { AB9540_PIN_U2 };
+static const unsigned gpio20_a_1_pins[] = { AB9540_PIN_V2 };
+static const unsigned gpio21_a_1_pins[] = { AB9540_PIN_N17 };
+static const unsigned gpio22_a_1_pins[] = { AB9540_PIN_N16 };
+static const unsigned gpio23_a_1_pins[] = { AB9540_PIN_M19 };
+static const unsigned gpio24_a_1_pins[] = { AB9540_PIN_T3 };
+static const unsigned gpio25_a_1_pins[] = { AB9540_PIN_W2 };
+static const unsigned gpio27_a_1_pins[] = { AB9540_PIN_H4 };
+static const unsigned gpio28_a_1_pins[] = { AB9540_PIN_F1 };
+static const unsigned gpio29_a_1_pins[] = { AB9540_PIN_F4 };
+static const unsigned gpio30_a_1_pins[] = { AB9540_PIN_F2 };
+static const unsigned gpio31_a_1_pins[] = { AB9540_PIN_E4 };
+static const unsigned gpio32_a_1_pins[] = { AB9540_PIN_F3 };
+static const unsigned gpio34_a_1_pins[] = { AB9540_PIN_J13 };
+static const unsigned gpio40_a_1_pins[] = { AB9540_PIN_L17 };
+static const unsigned gpio41_a_1_pins[] = { AB9540_PIN_L16 };
+static const unsigned gpio42_a_1_pins[] = { AB9540_PIN_W3 };
+static const unsigned gpio51_a_1_pins[] = { AB9540_PIN_G12 };
+static const unsigned gpio52_a_1_pins[] = { AB9540_PIN_E17 };
+static const unsigned gpio53_a_1_pins[] = { AB9540_PIN_D11 };
+static const unsigned usbuiccpd_a_1_pins[] = { AB9540_PIN_M18 };
+
+/* Altfunction B colum */
+static const unsigned pdmdata_b_1_pins[] = { AB9540_PIN_B18 };
+static const unsigned pwmextvibra1_b_1_pins[] = { AB9540_PIN_D18 };
+static const unsigned pwmextvibra2_b_1_pins[] = { AB9540_PIN_N4 };
+
+/* Altfunction C column */
+static const unsigned usbvdat_c_1_pins[] = { AB9540_PIN_D18 };
+
+#define AB9540_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \
+ .npins = ARRAY_SIZE(a##_pins), .altsetting = b }
+
+static const struct abx500_pingroup ab9540_groups[] = {
+ /* default column */
+ AB9540_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq6_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(pwmout2_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(pwmout3_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(adi1_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(usbuicc_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq7_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq8_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(dmic12_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(dmic34_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(dmic56_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(sysclkreq5_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio50_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(batremn_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(resethw_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(service_d_1, ABX500_DEFAULT),
+ AB9540_PIN_GROUP(gpio60_d_1, ABX500_DEFAULT),
+
+ /* Altfunction A column */
+ AB9540_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio4_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(hiqclkena_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(pdmclk_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(uartdata_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio15_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio16_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio21_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio22_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio23_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio24_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio25_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio27_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio28_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio29_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio30_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio31_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio32_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio34_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio40_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio41_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio42_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio51_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio52_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(gpio53_a_1, ABX500_ALT_A),
+ AB9540_PIN_GROUP(usbuiccpd_a_1, ABX500_ALT_A),
+
+ /* Altfunction B column */
+ AB9540_PIN_GROUP(pdmdata_b_1, ABX500_ALT_B),
+ AB9540_PIN_GROUP(pwmextvibra1_b_1, ABX500_ALT_B),
+ AB9540_PIN_GROUP(pwmextvibra2_b_1, ABX500_ALT_B),
+
+ /* Altfunction C column */
+ AB9540_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C),
+};
+
+/* We use this macro to define the groups applicable to a function */
+#define AB9540_FUNC_GROUPS(a, b...) \
+static const char * const a##_groups[] = { b };
+
+AB9540_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
+ "sysclkreq4_d_1", "sysclkreq5_d_1", "sysclkreq6_d_1",
+ "sysclkreq7_d_1", "sysclkreq8_d_1");
+AB9540_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", "gpio4_a_1",
+ "gpio10_d_1", "gpio11_d_1", "gpio13_d_1", "gpio14_a_1",
+ "gpio15_a_1", "gpio16_a_1", "gpio17_a_1", "gpio18_a_1",
+ "gpio19_a_1", "gpio20_a_1", "gpio21_a_1", "gpio22_a_1",
+ "gpio23_a_1", "gpio24_a_1", "gpio25_a_1", "gpio27_a_1",
+ "gpio28_a_1", "gpio29_a_1", "gpio30_a_1", "gpio31_a_1",
+ "gpio32_a_1", "gpio34_a_1", "gpio40_a_1", "gpio41_a_1",
+ "gpio42_a_1", "gpio50_d_1", "gpio51_a_1", "gpio52_a_1",
+ "gpio53_a_1", "gpio60_d_1");
+AB9540_FUNC_GROUPS(pwmout, "pwmout1_d_1", "pwmout2_d_1", "pwmout3_d_1");
+AB9540_FUNC_GROUPS(adi1, "adi1_d_1");
+AB9540_FUNC_GROUPS(usbuicc, "usbuicc_d_1", "usbuiccpd_a_1");
+AB9540_FUNC_GROUPS(dmic, "dmic12_d_1", "dmic34_d_1", "dmic56_d_1");
+AB9540_FUNC_GROUPS(extcpena, "extcpena_d_1");
+AB9540_FUNC_GROUPS(modsclsda, "modsclsda_d_1");
+AB9540_FUNC_GROUPS(batremn, "batremn_d_1");
+AB9540_FUNC_GROUPS(resethw, "resethw_d_1");
+AB9540_FUNC_GROUPS(service, "service_d_1");
+AB9540_FUNC_GROUPS(hiqclkena, "hiqclkena_a_1");
+AB9540_FUNC_GROUPS(pdm, "pdmdata_b_1", "pdmclk_a_1");
+AB9540_FUNC_GROUPS(uartdata, "uartdata_a_1");
+AB9540_FUNC_GROUPS(pwmextvibra, "pwmextvibra1_b_1", "pwmextvibra2_b_1");
+AB9540_FUNC_GROUPS(usbvdat, "usbvdat_c_1");
+
+#define FUNCTION(fname) \
+ { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+static const struct abx500_function ab9540_functions[] = {
+ FUNCTION(sysclkreq),
+ FUNCTION(gpio),
+ FUNCTION(pwmout),
+ FUNCTION(adi1),
+ FUNCTION(usbuicc),
+ FUNCTION(dmic),
+ FUNCTION(extcpena),
+ FUNCTION(modsclsda),
+ FUNCTION(batremn),
+ FUNCTION(resethw),
+ FUNCTION(service),
+ FUNCTION(hiqclkena),
+ FUNCTION(pdm),
+ FUNCTION(uartdata),
+ FUNCTION(pwmextvibra),
+ FUNCTION(usbvdat),
+};
+
+/*
+ * this table translates what's is in the AB9540 specification regarding the
+ * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
+ * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1,
+ * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
+ *
+ * example :
+ *
+ * ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2),
+ * means that pin AB9540_PIN_D18 (pin 13) supports 4 mux (default/ALT_A,
+ * ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to
+ * select the mux. ALTA, ALTB and ALTC val indicates values to write in
+ * ALTERNATFUNC register. We need to specifies these values as SOC
+ * designers didn't apply the same logic on how to select mux in the
+ * ABx500 family.
+ *
+ * As this pins supports at least ALT_B mux, default mux is
+ * selected by writing 1 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3
+ * default | 1 | 0 | 0
+ * alt_A | 0 | 0 | 1
+ * alt_B | 0 | 0 | 0
+ * alt_C | 0 | 1 | 0
+ *
+ * ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED),
+ * means that pin AB9540_PIN_R4 (pin 1) supports 2 mux, so only GPIOSEL
+ * register is used to select the mux. As this pins doesn't support at
+ * least ALT_B mux, default mux is by writing 0 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=0 | alternatfunc bit2= | alternatfunc bit1=
+ * default | 0 | 0 | 0
+ * alt_A | 1 | 0 | 0
+ */
+
+struct alternate_functions ab9540alternate_functions[AB9540_GPIO_MAX_NUMBER + 1] = {
+ /* GPIOSEL1 - bits 4-7 are reserved */
+ ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
+ ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
+ ALTERNATE_FUNCTIONS(4, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO4, altA controlled by bit 3*/
+ ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5 */
+ ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6 */
+ ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7 */
+ ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8 */
+ /* GPIOSEL2 - bits 0 and 3 are reserved */
+ ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9 */
+ ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(11, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12 */
+ ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */
+ ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(15, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO15, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(16, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO16, altA controlled by bit 7 */
+ /* GPIOSEL3 - bit 1-3 reserved
+ * pins 17 to 20 are special case, only bit 0 is used to select
+ * alternate function for these 4 pins.
+ * bits 1 to 3 are reserved
+ */
+ ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(21, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO21, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(22, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO22, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(23, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO23, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(24, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO24, altA controlled by bit 7 */
+ /* GPIOSEL4 - bit 1 reserved */
+ ALTERNATE_FUNCTIONS(25, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO25, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26 */
+ ALTERNATE_FUNCTIONS(27, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO27, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(28, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO28, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(29, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO29, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(30, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO30, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(31, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO31, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(32, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO32, altA controlled by bit 7 */
+ /* GPIOSEL5 - bit 0, 2-6 are reserved */
+ ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33 */
+ ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35 */
+ ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36 */
+ ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37 */
+ ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38 */
+ ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39 */
+ ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7 */
+ /* GPIOSEL6 - bit 2-7 are reserved */
+ ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(42, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO42, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(43, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO43 */
+ ALTERNATE_FUNCTIONS(44, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO44 */
+ ALTERNATE_FUNCTIONS(45, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO45 */
+ ALTERNATE_FUNCTIONS(46, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO46 */
+ ALTERNATE_FUNCTIONS(47, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO47 */
+ ALTERNATE_FUNCTIONS(48, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO48 */
+ /*
+ * GPIOSEL7 - bit 0 and 6-7 are reserved
+ * special case with GPIO60, wich is located at offset 5 of gpiosel7
+ * don't know why it has been called GPIO60 in AB9540 datasheet,
+ * GPIO54 would be logical..., so at SOC point of view we consider
+ * GPIO60 = GPIO54
+ */
+ ALTERNATE_FUNCTIONS(49, 0, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49 */
+ ALTERNATE_FUNCTIONS(50, 1, 2, UNUSED, 1, 0, 0), /* GPIO50, altA and altB controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(51, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO51, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(52, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(53, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(54, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO54 = GPIO60, altA controlled by bit 5 */
+};
+
+struct abx500_gpio_irq_cluster ab9540_gpio_irq_cluster[] = {
+ GPIO_IRQ_CLUSTER(9, 12, 0), /* GPIO numbers start from 1 */
+ GPIO_IRQ_CLUSTER(23, 24, 0),
+ GPIO_IRQ_CLUSTER(39, 40, 0),
+ GPIO_IRQ_CLUSTER(49, 53, 0),
+};
+
+static struct abx500_pinctrl_soc_data ab9540_soc = {
+ .gpio_ranges = ab9540_pinranges,
+ .gpio_num_ranges = ARRAY_SIZE(ab9540_pinranges),
+ .pins = ab9540_pins,
+ .npins = ARRAY_SIZE(ab9540_pins),
+ .functions = ab9540_functions,
+ .nfunctions = ARRAY_SIZE(ab9540_functions),
+ .groups = ab9540_groups,
+ .ngroups = ARRAY_SIZE(ab9540_groups),
+ .alternate_functions = ab9540alternate_functions,
+ .gpio_irq_cluster = ab9540_gpio_irq_cluster,
+ .ngpio_irq_cluster = ARRAY_SIZE(ab9540_gpio_irq_cluster),
+ .irq_gpio_rising_offset = AB8500_INT_GPIO6R,
+ .irq_gpio_falling_offset = AB8500_INT_GPIO6F,
+ .irq_gpio_factor = 1,
+};
+
+void __devinit
+abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc)
+{
+ *soc = &ab9540_soc;
+}
diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c
index 94f9381..39020ac 100644
--- a/drivers/pinctrl/pinctrl-abx500.c
+++ b/drivers/pinctrl/pinctrl-abx500.c
@@ -1119,6 +1119,9 @@ static int abx500_gpio_probe(struct platform_device *pdev)
case PINCTRL_AB8500:
abx500_pinctrl_ab8500_init(&pct->soc);
break;
+ case PINCTRL_AB9540:
+ abx500_pinctrl_ab9540_init(&pct->soc);
+ break;
case PINCTRL_AB8505:
abx500_pinctrl_ab8505_init(&pct->soc);
break;
diff --git a/drivers/pinctrl/pinctrl-abx500.h b/drivers/pinctrl/pinctrl-abx500.h
index 5c5ac75..fe1ccb7 100644
--- a/drivers/pinctrl/pinctrl-abx500.h
+++ b/drivers/pinctrl/pinctrl-abx500.h
@@ -190,6 +190,19 @@ abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
#endif
+#ifdef CONFIG_PINCTRL_AB9540
+
+void abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc);
+
+#else
+
+static inline void
+abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc)
+{
+}
+
+#endif
+
#ifdef CONFIG_PINCTRL_AB8505
void abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc);
--
1.7.11.3
^ permalink raw reply related
* [PATCH 4/5] pinctrl/abx500: add AB8540 sub-driver
From: Linus Walleij @ 2013-01-28 13:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Patrice Chotard <patrice.chotard@stericsson.com>
Add AB8540 sub driver to the ABx500 family, pins, pin groups and
gpio range.
As the pin controller (also the ABx500 controllers) is an
inherent part of the SoC and will prevent boot if not
available, select this from the Ux500 SoC Kconfig.
Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Request an ACK from the ARM SoC maintainers for this patch.
---
arch/arm/mach-ux500/Kconfig | 1 +
drivers/pinctrl/Kconfig | 4 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-ab8540.c | 406 +++++++++++++++++++++++++++++++++++++++
drivers/pinctrl/pinctrl-abx500.c | 3 +
drivers/pinctrl/pinctrl-abx500.h | 13 ++
6 files changed, 428 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-ab8540.c
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 9434063..5a12a7a 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -22,6 +22,7 @@ config UX500_SOC_DB8500
select PINCTRL_AB8500
select PINCTRL_AB8505
select PINCTRL_AB9540
+ select PINCTRL_AB8540
select REGULATOR
select REGULATOR_DB8500_PRCMU
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index aea4ceb..0ef92cc 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -37,6 +37,10 @@ config PINCTRL_AB8500
bool "AB8500 pin controller driver"
depends on PINCTRL_ABX500 && ARCH_U8500
+config PINCTRL_AB8540
+ bool "AB8540 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
config PINCTRL_AB9540
bool "AB9540 pin controller driver"
depends on PINCTRL_ABX500 && ARCH_U8500
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index e866b79..e1ff3a5 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -11,6 +11,7 @@ endif
obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o
obj-$(CONFIG_PINCTRL_ABX500) += pinctrl-abx500.o
obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o
+obj-$(CONFIG_PINCTRL_AB8540) += pinctrl-ab8540.o
obj-$(CONFIG_PINCTRL_AB9540) += pinctrl-ab9540.o
obj-$(CONFIG_PINCTRL_AB8505) += pinctrl-ab8505.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
diff --git a/drivers/pinctrl/pinctrl-ab8540.c b/drivers/pinctrl/pinctrl-ab8540.c
new file mode 100644
index 0000000..5d4eac4
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ab8540.c
@@ -0,0 +1,406 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include "pinctrl-abx500.h"
+
+/* All the pins that can be used for GPIO and some other functions */
+#define ABX500_GPIO(offset) (offset)
+
+#define AB8540_PIN_J16 ABX500_GPIO(1)
+#define AB8540_PIN_D17 ABX500_GPIO(2)
+#define AB8540_PIN_C12 ABX500_GPIO(3)
+#define AB8540_PIN_G12 ABX500_GPIO(4)
+/* hole */
+#define AB8540_PIN_D16 ABX500_GPIO(14)
+#define AB8540_PIN_F15 ABX500_GPIO(15)
+#define AB8540_PIN_J8 ABX500_GPIO(16)
+#define AB8540_PIN_K16 ABX500_GPIO(17)
+#define AB8540_PIN_G15 ABX500_GPIO(18)
+#define AB8540_PIN_F17 ABX500_GPIO(19)
+#define AB8540_PIN_E17 ABX500_GPIO(20)
+/* hole */
+#define AB8540_PIN_AA16 ABX500_GPIO(27)
+#define AB8540_PIN_W18 ABX500_GPIO(28)
+#define AB8540_PIN_Y15 ABX500_GPIO(29)
+#define AB8540_PIN_W16 ABX500_GPIO(30)
+#define AB8540_PIN_V15 ABX500_GPIO(31)
+#define AB8540_PIN_W17 ABX500_GPIO(32)
+/* hole */
+#define AB8540_PIN_D12 ABX500_GPIO(42)
+#define AB8540_PIN_P4 ABX500_GPIO(43)
+#define AB8540_PIN_AB1 ABX500_GPIO(44)
+#define AB8540_PIN_K7 ABX500_GPIO(45)
+#define AB8540_PIN_L7 ABX500_GPIO(46)
+#define AB8540_PIN_G10 ABX500_GPIO(47)
+#define AB8540_PIN_K12 ABX500_GPIO(48)
+/* hole */
+#define AB8540_PIN_N8 ABX500_GPIO(51)
+#define AB8540_PIN_P12 ABX500_GPIO(52)
+#define AB8540_PIN_K8 ABX500_GPIO(53)
+#define AB8540_PIN_J11 ABX500_GPIO(54)
+#define AB8540_PIN_AC2 ABX500_GPIO(55)
+#define AB8540_PIN_AB2 ABX500_GPIO(56)
+
+/* indicates the highest GPIO number */
+#define AB8540_GPIO_MAX_NUMBER 56
+
+/*
+ * The names of the pins are denoted by GPIO number and ball name, even
+ * though they can be used for other things than GPIO, this is the first
+ * column in the table of the data sheet and often used on schematics and
+ * such.
+ */
+static const struct pinctrl_pin_desc ab8540_pins[] = {
+ PINCTRL_PIN(AB8540_PIN_J16, "GPIO1_J16"),
+ PINCTRL_PIN(AB8540_PIN_D17, "GPIO2_D17"),
+ PINCTRL_PIN(AB8540_PIN_C12, "GPIO3_C12"),
+ PINCTRL_PIN(AB8540_PIN_G12, "GPIO4_G12"),
+ /* hole */
+ PINCTRL_PIN(AB8540_PIN_D16, "GPIO14_D16"),
+ PINCTRL_PIN(AB8540_PIN_F15, "GPIO15_F15"),
+ PINCTRL_PIN(AB8540_PIN_J8, "GPIO16_J8"),
+ PINCTRL_PIN(AB8540_PIN_K16, "GPIO17_K16"),
+ PINCTRL_PIN(AB8540_PIN_G15, "GPIO18_G15"),
+ PINCTRL_PIN(AB8540_PIN_F17, "GPIO19_F17"),
+ PINCTRL_PIN(AB8540_PIN_E17, "GPIO20_E17"),
+ /* hole */
+ PINCTRL_PIN(AB8540_PIN_AA16, "GPIO27_AA16"),
+ PINCTRL_PIN(AB8540_PIN_W18, "GPIO28_W18"),
+ PINCTRL_PIN(AB8540_PIN_Y15, "GPIO29_Y15"),
+ PINCTRL_PIN(AB8540_PIN_W16, "GPIO30_W16"),
+ PINCTRL_PIN(AB8540_PIN_V15, "GPIO31_V15"),
+ PINCTRL_PIN(AB8540_PIN_W17, "GPIO32_W17"),
+ /* hole */
+ PINCTRL_PIN(AB8540_PIN_D12, "GPIO42_D12"),
+ PINCTRL_PIN(AB8540_PIN_P4, "GPIO43_P4"),
+ PINCTRL_PIN(AB8540_PIN_AB1, "GPIO44_AB1"),
+ PINCTRL_PIN(AB8540_PIN_K7, "GPIO45_K7"),
+ PINCTRL_PIN(AB8540_PIN_L7, "GPIO46_L7"),
+ PINCTRL_PIN(AB8540_PIN_G10, "GPIO47_G10"),
+ PINCTRL_PIN(AB8540_PIN_K12, "GPIO48_K12"),
+ /* hole */
+ PINCTRL_PIN(AB8540_PIN_N8, "GPIO51_N8"),
+ PINCTRL_PIN(AB8540_PIN_P12, "GPIO52_P12"),
+ PINCTRL_PIN(AB8540_PIN_K8, "GPIO53_K8"),
+ PINCTRL_PIN(AB8540_PIN_J11, "GPIO54_J11"),
+ PINCTRL_PIN(AB8540_PIN_AC2, "GPIO55_AC2"),
+ PINCTRL_PIN(AB8540_PIN_AB2, "GPIO56_AB2"),
+};
+
+/*
+ * Maps local GPIO offsets to local pin numbers
+ */
+static const struct abx500_pinrange ab8540_pinranges[] = {
+ ABX500_PINRANGE(1, 4, ABX500_ALT_A),
+ ABX500_PINRANGE(14, 7, ABX500_ALT_A),
+ ABX500_PINRANGE(27, 6, ABX500_ALT_A),
+ ABX500_PINRANGE(42, 7, ABX500_ALT_A),
+ ABX500_PINRANGE(51, 6, ABX500_ALT_A),
+};
+
+/*
+ * Read the pin group names like this:
+ * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
+ *
+ * The groups are arranged as sets per altfunction column, so we can
+ * mux in one group at a time by selecting the same altfunction for them
+ * all. When functions require pins on different altfunctions, you need
+ * to combine several groups.
+ */
+
+/* default column */
+static const unsigned sysclkreq2_d_1_pins[] = { AB8540_PIN_J16 };
+static const unsigned sysclkreq3_d_1_pins[] = { AB8540_PIN_D17 };
+static const unsigned sysclkreq4_d_1_pins[] = { AB8540_PIN_C12 };
+static const unsigned sysclkreq6_d_1_pins[] = { AB8540_PIN_G12 };
+static const unsigned pwmout1_d_1_pins[] = { AB8540_PIN_D16 };
+static const unsigned pwmout2_d_1_pins[] = { AB8540_PIN_F15 };
+static const unsigned pwmout3_d_1_pins[] = { AB8540_PIN_J8 };
+
+/* audio data interface 1*/
+static const unsigned adi1_d_1_pins[] = { AB8540_PIN_K16, AB8540_PIN_G15,
+ AB8540_PIN_F17, AB8540_PIN_E17 };
+/* Digital microphone 1 and 2 */
+static const unsigned dmic12_d_1_pins[] = { AB8540_PIN_AA16, AB8540_PIN_W18 };
+/* Digital microphone 3 and 4 */
+static const unsigned dmic34_d_1_pins[] = { AB8540_PIN_Y15, AB8540_PIN_W16 };
+/* Digital microphone 5 and 6 */
+static const unsigned dmic56_d_1_pins[] = { AB8540_PIN_V15, AB8540_PIN_W17 };
+static const unsigned sysclkreq5_d_1_pins[] = { AB8540_PIN_D12 };
+static const unsigned batremn_d_1_pins[] = { AB8540_PIN_P4 };
+static const unsigned service_d_1_pins[] = { AB8540_PIN_AB1 };
+static const unsigned pwrctrl0_d_1_pins[] = { AB8540_PIN_K7 };
+static const unsigned pwrctrl1_d_1_pins[] = { AB8540_PIN_L7 };
+static const unsigned pwmextvibra1_d_1_pins[] = { AB8540_PIN_G10 };
+static const unsigned pwmextvibra2_d_1_pins[] = { AB8540_PIN_K12 };
+static const unsigned gpio1_vbat_d_1_pins[] = { AB8540_PIN_N8 };
+static const unsigned gpio2_vbat_d_1_pins[] = { AB8540_PIN_P12 };
+static const unsigned gpio3_vbat_d_1_pins[] = { AB8540_PIN_K8 };
+static const unsigned gpio4_vbat_d_1_pins[] = { AB8540_PIN_J11 };
+static const unsigned pdmclkdat_d_1_pins[] = { AB8540_PIN_AC2, AB8540_PIN_AB2 };
+
+/* Altfunction A column */
+static const unsigned gpio1_a_1_pins[] = { AB8540_PIN_J16 };
+static const unsigned gpio2_a_1_pins[] = { AB8540_PIN_D17 };
+static const unsigned gpio3_a_1_pins[] = { AB8540_PIN_C12 };
+static const unsigned gpio4_a_1_pins[] = { AB8540_PIN_G12 };
+static const unsigned gpio14_a_1_pins[] = { AB8540_PIN_D16 };
+static const unsigned gpio15_a_1_pins[] = { AB8540_PIN_F15 };
+static const unsigned gpio16_a_1_pins[] = { AB8540_PIN_J8 };
+static const unsigned gpio17_a_1_pins[] = { AB8540_PIN_K16 };
+static const unsigned gpio18_a_1_pins[] = { AB8540_PIN_G15 };
+static const unsigned gpio19_a_1_pins[] = { AB8540_PIN_F17 };
+static const unsigned gpio20_a_1_pins[] = { AB8540_PIN_E17 };
+static const unsigned gpio27_a_1_pins[] = { AB8540_PIN_AA16 };
+static const unsigned gpio28_a_1_pins[] = { AB8540_PIN_W18 };
+static const unsigned gpio29_a_1_pins[] = { AB8540_PIN_Y15 };
+static const unsigned gpio30_a_1_pins[] = { AB8540_PIN_W16 };
+static const unsigned gpio31_a_1_pins[] = { AB8540_PIN_V15 };
+static const unsigned gpio32_a_1_pins[] = { AB8540_PIN_W17 };
+static const unsigned gpio42_a_1_pins[] = { AB8540_PIN_D12 };
+static const unsigned gpio43_a_1_pins[] = { AB8540_PIN_P4 };
+static const unsigned gpio44_a_1_pins[] = { AB8540_PIN_AB1 };
+static const unsigned gpio45_a_1_pins[] = { AB8540_PIN_K7 };
+static const unsigned gpio46_a_1_pins[] = { AB8540_PIN_L7 };
+static const unsigned gpio47_a_1_pins[] = { AB8540_PIN_G10 };
+static const unsigned gpio48_a_1_pins[] = { AB8540_PIN_K12 };
+static const unsigned gpio51_a_1_pins[] = { AB8540_PIN_N8 };
+static const unsigned gpio52_a_1_pins[] = { AB8540_PIN_P12 };
+static const unsigned gpio53_a_1_pins[] = { AB8540_PIN_K8 };
+static const unsigned gpio54_a_1_pins[] = { AB8540_PIN_J11 };
+static const unsigned gpio55_a_1_pins[] = { AB8540_PIN_AC2 };
+static const unsigned gpio56_a_1_pins[] = { AB8540_PIN_AB2 };
+
+#define AB8540_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \
+ .npins = ARRAY_SIZE(a##_pins), .altsetting = b }
+
+static const struct abx500_pingroup ab8540_groups[] = {
+ /* default column */
+ AB8540_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(sysclkreq6_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pwmout2_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pwmout3_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(adi1_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(dmic12_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(dmic34_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(dmic56_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(sysclkreq5_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(batremn_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(service_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pwrctrl0_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pwrctrl1_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pwmextvibra1_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pwmextvibra2_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(gpio1_vbat_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(gpio2_vbat_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(gpio3_vbat_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(gpio4_vbat_d_1, ABX500_DEFAULT),
+ AB8540_PIN_GROUP(pdmclkdat_d_1, ABX500_DEFAULT),
+ /* Altfunction A column */
+ AB8540_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio4_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio15_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio16_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio27_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio28_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio29_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio30_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio31_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio32_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio42_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio43_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio44_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio45_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio46_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio47_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio48_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio51_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio52_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio53_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio54_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio55_a_1, ABX500_ALT_A),
+ AB8540_PIN_GROUP(gpio56_a_1, ABX500_ALT_A),
+};
+
+/* We use this macro to define the groups applicable to a function */
+#define AB8540_FUNC_GROUPS(a, b...) \
+static const char * const a##_groups[] = { b };
+
+AB8540_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
+ "sysclkreq4_d_1", "sysclkreq5_d_1", "sysclkreq6_d_1");
+AB8540_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", "gpio4_a_1",
+ "gpio14_a_1", "gpio15_a_1", "gpio16_a_1", "gpio17_a_1",
+ "gpio18_a_1", "gpio19_a_1", "gpio20_a_1", "gpio27_a_1",
+ "gpio28_a_1", "gpio29_a_1", "gpio30_a_1", "gpio31_a_1",
+ "gpio32_a_1", "gpio42_a_1", "gpio43_a_1", "gpio44_a_1",
+ "gpio45_a_1", "gpio46_a_1", "gpio47_a_1", "gpio48_a_1",
+ "gpio51_a_1", "gpio52_a_1", "gpio53_a_1", "gpio54_a_1",
+ "gpio55_a_1", "gpio56_a_1");
+AB8540_FUNC_GROUPS(pwmout, "pwmout1_d_1", "pwmout2_d_1", "pwmout3_d_1");
+AB8540_FUNC_GROUPS(adi1, "adi1_d_1");
+AB8540_FUNC_GROUPS(dmic, "dmic12_d_1", "dmic34_d_1", "dmic56_d_1");
+AB8540_FUNC_GROUPS(batremn, "batremn_d_1");
+AB8540_FUNC_GROUPS(service, "service_d_1");
+AB8540_FUNC_GROUPS(pwrctrl, "pwrctrl0_d_1", "pwrctrl1_d_1");
+AB8540_FUNC_GROUPS(pwmextvibra, "pwmextvibra1_d_1", "pwmextvibra2_d_1");
+AB8540_FUNC_GROUPS(gpio_vbat, "gpio1_vbat_d_1", "gpio2_vbat_d_1",
+ "gpio3_vbat_d_1", "gpio4_vbat_d_1");
+AB8540_FUNC_GROUPS(pdm, "pdmclkdat_d_1");
+
+#define FUNCTION(fname) \
+ { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+static const struct abx500_function ab8540_functions[] = {
+ FUNCTION(sysclkreq),
+ FUNCTION(gpio),
+ FUNCTION(pwmout),
+ FUNCTION(adi1),
+ FUNCTION(dmic),
+ FUNCTION(batremn),
+ FUNCTION(service),
+ FUNCTION(pwrctrl),
+ FUNCTION(pwmextvibra),
+ FUNCTION(gpio_vbat),
+ FUNCTION(pdm),
+};
+
+/*
+ * this table translates what's is in the AB8540 specification regarding the
+ * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
+ * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1,
+ * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
+ * AB8540 only supports DEFAULT and ALTA functions, so ALTERNATFUNC
+ * registers is not used
+ *
+ */
+
+struct alternate_functions ab8540_alternate_functions[AB8540_GPIO_MAX_NUMBER + 1] = {
+ /* GPIOSEL1 - bit 4-7 reserved */
+ ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
+ ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
+ ALTERNATE_FUNCTIONS(4, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO4, altA controlled by bit 3*/
+ ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5 */
+ ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6 */
+ ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7 */
+ ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8 */
+ /* GPIOSEL2 - bit 0-4 reserved */
+ ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9 */
+ ALTERNATE_FUNCTIONS(10, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO10 */
+ ALTERNATE_FUNCTIONS(11, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO11 */
+ ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12 */
+ ALTERNATE_FUNCTIONS(13, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO13 */
+ ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(15, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO15, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(16, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO16, altA controlled by bit 7 */
+ /* GPIOSEL3 - bit 4-7 reserved */
+ ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(18, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(19, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(20, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(21, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO21 */
+ ALTERNATE_FUNCTIONS(22, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO22 */
+ ALTERNATE_FUNCTIONS(23, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO23 */
+ ALTERNATE_FUNCTIONS(24, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO24 */
+ /* GPIOSEL4 - bit 0-1 reserved */
+ ALTERNATE_FUNCTIONS(25, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO25 */
+ ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26 */
+ ALTERNATE_FUNCTIONS(27, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO27, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(28, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO28, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(29, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO29, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(30, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO30, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(31, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO31, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(32, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO32, altA controlled by bit 7 */
+ /* GPIOSEL5 - bit 0-7 reserved */
+ ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33 */
+ ALTERNATE_FUNCTIONS(34, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO34 */
+ ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35 */
+ ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36 */
+ ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37 */
+ ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38 */
+ ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39 */
+ ALTERNATE_FUNCTIONS(40, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO40 */
+ /* GPIOSEL6 - bit 0 reserved */
+ ALTERNATE_FUNCTIONS(41, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO41 */
+ ALTERNATE_FUNCTIONS(42, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO42, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(43, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO43, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(44, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO44, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(45, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO45, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(46, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO46, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(47, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO47, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(48, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO48, altA controlled by bit 7 */
+ /* GPIOSEL7 - bit 0-1 reserved */
+ ALTERNATE_FUNCTIONS(49, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49 */
+ ALTERNATE_FUNCTIONS(50, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO50 */
+ ALTERNATE_FUNCTIONS(51, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO51, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(52, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(53, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */
+ ALTERNATE_FUNCTIONS(54, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO54, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(55, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO55, altA controlled by bit 6 */
+ ALTERNATE_FUNCTIONS(56, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO56, altA controlled by bit 7 */
+};
+
+static struct pullud ab8540_pullud = {
+ .first_pin = 51, /* GPIO1_VBAT */
+ .last_pin = 54, /* GPIO4_VBAT */
+};
+
+/*
+ * For AB8540 Only some GPIOs are interrupt capable:
+ * GPIO43 to GPIO44
+ * GPIO51 to GPIO54
+ */
+struct abx500_gpio_irq_cluster ab8540_gpio_irq_cluster[] = {
+ GPIO_IRQ_CLUSTER(42, 43, 2), /* GPIO numbers start from 1 */
+ GPIO_IRQ_CLUSTER(50, 53, 0),
+};
+
+static struct abx500_pinctrl_soc_data ab8540_soc = {
+ .gpio_ranges = ab8540_pinranges,
+ .gpio_num_ranges = ARRAY_SIZE(ab8540_pinranges),
+ .pins = ab8540_pins,
+ .npins = ARRAY_SIZE(ab8540_pins),
+ .functions = ab8540_functions,
+ .nfunctions = ARRAY_SIZE(ab8540_functions),
+ .groups = ab8540_groups,
+ .ngroups = ARRAY_SIZE(ab8540_groups),
+ .alternate_functions = ab8540_alternate_functions,
+ .pullud = &ab8540_pullud,
+ .gpio_irq_cluster = ab8540_gpio_irq_cluster,
+ .ngpio_irq_cluster = ARRAY_SIZE(ab8540_gpio_irq_cluster),
+ .irq_gpio_rising_offset = AB8540_INT_GPIO43R,
+ .irq_gpio_falling_offset = AB8540_INT_GPIO43F,
+ .irq_gpio_factor = 2,
+};
+
+void __devinit
+abx500_pinctrl_ab8540_init(struct abx500_pinctrl_soc_data **soc)
+{
+ *soc = &ab8540_soc;
+}
diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c
index 39020ac..7046aef 100644
--- a/drivers/pinctrl/pinctrl-abx500.c
+++ b/drivers/pinctrl/pinctrl-abx500.c
@@ -1119,6 +1119,9 @@ static int abx500_gpio_probe(struct platform_device *pdev)
case PINCTRL_AB8500:
abx500_pinctrl_ab8500_init(&pct->soc);
break;
+ case PINCTRL_AB8540:
+ abx500_pinctrl_ab8540_init(&pct->soc);
+ break;
case PINCTRL_AB9540:
abx500_pinctrl_ab9540_init(&pct->soc);
break;
diff --git a/drivers/pinctrl/pinctrl-abx500.h b/drivers/pinctrl/pinctrl-abx500.h
index fe1ccb7..df8e0ff 100644
--- a/drivers/pinctrl/pinctrl-abx500.h
+++ b/drivers/pinctrl/pinctrl-abx500.h
@@ -190,6 +190,19 @@ abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
#endif
+#ifdef CONFIG_PINCTRL_AB8540
+
+void abx500_pinctrl_ab8540_init(struct abx500_pinctrl_soc_data **soc);
+
+#else
+
+static inline void
+abx500_pinctrl_ab8540_init(struct abx500_pinctrl_soc_data **soc)
+{
+}
+
+#endif
+
#ifdef CONFIG_PINCTRL_AB9540
void abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc);
--
1.7.11.3
^ permalink raw reply related
* [PATCH 5/5] ARM: ux500: select the DB8540 pin controller
From: Linus Walleij @ 2013-01-28 13:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Linus Walleij <linus.walleij@linaro.org>
The pin controller is an inherent part of the SoC, without
it the system will not boot, thus it needs to be selected
from Kconfig.
Cc: arm at kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Requesting ACK from ARM SoC on this patch.
---
arch/arm/mach-ux500/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 5a12a7a..3e5bbd0 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -19,6 +19,7 @@ config UX500_SOC_DB8500
select CPU_FREQ_TABLE if CPU_FREQ
select MFD_DB8500_PRCMU
select PINCTRL_DB8500
+ select PINCTRL_DB8540
select PINCTRL_AB8500
select PINCTRL_AB8505
select PINCTRL_AB9540
--
1.7.11.3
^ permalink raw reply related
* [PATCH v3 0/3] leds-pwm: Defer PWM calls if PWM can sleep
From: Florian Vaussard @ 2013-01-28 14:00 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
When using the leds-pwm module with external PWM chips connected through
I2C, the kernel will panic when settings a trigger. In this case, PWM
calls can sleep, and should be deferred.
Patch 1 and 2 add the necessary API to the PWM subsystem, and update
matching drivers. Patch 3 updates leds-pwm to use a worker if the PWM
chip can sleep, or performs direct calls otherwise.
This patchset is based on the for-next branch of the led subsystem [1],
as patch 3 depends on the recent work of Peter for DT bindings in leds-pwm.
The pwm patches should probably follow the same path.
Tested on Overo (OMAP3 + TWL4030) with device tree.
Best regards,
Florian
[1] git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
Changes from v2:
* pwm_cansleep -> pwm_can_sleep
* use bool for can_sleep member
* minor fixes
Changes from v1:
* pwm_can_sleep -> pwm_cansleep
* avoid duplicated code between the worker and the direct call
* cache the value of pwm_cansleep inside leds-pwm to avoid API calls
Florian Vaussard (3):
pwm: Add pwm_can_sleep() as exported API to users
pwm: Add can_sleep property to drivers
leds: leds-pwm: Defer led_pwm_set() if PWM can sleep
drivers/leds/leds-pwm.c | 50 +++++++++++++++++++++++++++++++++++++-------
drivers/pwm/core.c | 12 ++++++++++
drivers/pwm/pwm-twl-led.c | 1 +
drivers/pwm/pwm-twl.c | 1 +
include/linux/pwm.h | 10 +++++++++
5 files changed, 66 insertions(+), 8 deletions(-)
--
1.7.5.4
^ permalink raw reply
* [PATCH v3 1/3] pwm: Add pwm_can_sleep() as exported API to users
From: Florian Vaussard @ 2013-01-28 14:00 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1359381659-24454-1-git-send-email-florian.vaussard@epfl.ch>
Calls to some external PWM chips can sleep. To help users,
add pwm_can_sleep() API.
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
---
drivers/pwm/core.c | 12 ++++++++++++
include/linux/pwm.h | 10 ++++++++++
2 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 4a13da4..41c0b0c 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -763,6 +763,18 @@ void devm_pwm_put(struct device *dev, struct pwm_device *pwm)
}
EXPORT_SYMBOL_GPL(devm_pwm_put);
+/**
+ * pwm_can_sleep() - report whether PWM access will sleep
+ * @pwm: PWM device
+ *
+ * It returns true if accessing the PWM can sleep, false otherwise.
+ */
+bool pwm_can_sleep(struct pwm_device *pwm)
+{
+ return pwm->chip->can_sleep;
+}
+EXPORT_SYMBOL_GPL(pwm_can_sleep);
+
#ifdef CONFIG_DEBUG_FS
static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
{
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index 70655a2..747c657 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -146,6 +146,8 @@ struct pwm_ops {
* @base: number of first PWM controlled by this chip
* @npwm: number of PWMs controlled by this chip
* @pwms: array of PWM devices allocated by the framework
+ * @can_sleep: flag must be set iff config()/enable()/disable() methods sleep,
+ * as they must while accessing PWM chips over I2C or SPI
*/
struct pwm_chip {
struct device *dev;
@@ -159,6 +161,7 @@ struct pwm_chip {
struct pwm_device * (*of_xlate)(struct pwm_chip *pc,
const struct of_phandle_args *args);
unsigned int of_pwm_n_cells;
+ bool can_sleep;
};
#if IS_ENABLED(CONFIG_PWM)
@@ -182,6 +185,8 @@ struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id);
struct pwm_device *devm_of_pwm_get(struct device *dev, struct device_node *np,
const char *con_id);
void devm_pwm_put(struct device *dev, struct pwm_device *pwm);
+
+bool pwm_can_sleep(struct pwm_device *pwm);
#else
static inline int pwm_set_chip_data(struct pwm_device *pwm, void *data)
{
@@ -242,6 +247,11 @@ static inline struct pwm_device *devm_of_pwm_get(struct device *dev,
static inline void devm_pwm_put(struct device *dev, struct pwm_device *pwm)
{
}
+
+static inline bool pwm_can_sleep(struct pwm_device *pwm)
+{
+ return false;
+}
#endif
struct pwm_lookup {
--
1.7.5.4
^ permalink raw reply related
* [PATCH v3 2/3] pwm: Add can_sleep property to drivers
From: Florian Vaussard @ 2013-01-28 14:00 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1359381659-24454-1-git-send-email-florian.vaussard@epfl.ch>
Calls to PWM drivers connected through I2C can sleep.
Use the new can_sleep property.
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
---
drivers/pwm/pwm-twl-led.c | 1 +
drivers/pwm/pwm-twl.c | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/pwm/pwm-twl-led.c b/drivers/pwm/pwm-twl-led.c
index 9dfa0f3..83e25d4 100644
--- a/drivers/pwm/pwm-twl-led.c
+++ b/drivers/pwm/pwm-twl-led.c
@@ -300,6 +300,7 @@ static int twl_pwmled_probe(struct platform_device *pdev)
twl->chip.dev = &pdev->dev;
twl->chip.base = -1;
+ twl->chip.can_sleep = true;
mutex_init(&twl->mutex);
diff --git a/drivers/pwm/pwm-twl.c b/drivers/pwm/pwm-twl.c
index e65db95..f783efc 100644
--- a/drivers/pwm/pwm-twl.c
+++ b/drivers/pwm/pwm-twl.c
@@ -315,6 +315,7 @@ static int twl_pwm_probe(struct platform_device *pdev)
twl->chip.dev = &pdev->dev;
twl->chip.base = -1;
twl->chip.npwm = 2;
+ twl->chip.can_sleep = true;
mutex_init(&twl->mutex);
--
1.7.5.4
^ permalink raw reply related
* [PATCH v3 3/3] leds: leds-pwm: Defer led_pwm_set() if PWM can sleep
From: Florian Vaussard @ 2013-01-28 14:00 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1359381659-24454-1-git-send-email-florian.vaussard@epfl.ch>
Call to led_pwm_set() can happen inside atomic context, like triggers.
If the PWM call can sleep, defer using a worker.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
---
drivers/leds/leds-pwm.c | 50 +++++++++++++++++++++++++++++++++++++++-------
1 files changed, 42 insertions(+), 8 deletions(-)
diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index a1ea5f6..faf52c0 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -23,12 +23,16 @@
#include <linux/pwm.h>
#include <linux/leds_pwm.h>
#include <linux/slab.h>
+#include <linux/workqueue.h>
struct led_pwm_data {
struct led_classdev cdev;
struct pwm_device *pwm;
+ struct work_struct work;
unsigned int active_low;
unsigned int period;
+ int duty;
+ bool can_sleep;
};
struct led_pwm_priv {
@@ -36,6 +40,26 @@ struct led_pwm_priv {
struct led_pwm_data leds[0];
};
+static void __led_pwm_set(struct led_pwm_data *led_dat)
+{
+ int new_duty = led_dat->duty;
+
+ pwm_config(led_dat->pwm, new_duty, led_dat->period);
+
+ if (new_duty == 0)
+ pwm_disable(led_dat->pwm);
+ else
+ pwm_enable(led_dat->pwm);
+}
+
+static void led_pwm_work(struct work_struct *work)
+{
+ struct led_pwm_data *led_dat =
+ container_of(work, struct led_pwm_data, work);
+
+ __led_pwm_set(led_dat);
+}
+
static void led_pwm_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
@@ -44,13 +68,12 @@ static void led_pwm_set(struct led_classdev *led_cdev,
unsigned int max = led_dat->cdev.max_brightness;
unsigned int period = led_dat->period;
- if (brightness == 0) {
- pwm_config(led_dat->pwm, 0, period);
- pwm_disable(led_dat->pwm);
- } else {
- pwm_config(led_dat->pwm, brightness * period / max, period);
- pwm_enable(led_dat->pwm);
- }
+ led_dat->duty = brightness * period / max;
+
+ if (led_dat->can_sleep)
+ schedule_work(&led_dat->work);
+ else
+ __led_pwm_set(led_dat);
}
static inline size_t sizeof_pwm_leds_priv(int num_leds)
@@ -100,6 +123,10 @@ static struct led_pwm_priv *led_pwm_create_of(struct platform_device *pdev)
led_dat->cdev.brightness = LED_OFF;
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+ led_dat->can_sleep = pwm_can_sleep(led_dat->pwm);
+ if (led_dat->can_sleep)
+ INIT_WORK(&led_dat->work, led_pwm_work);
+
ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
if (ret < 0) {
dev_err(&pdev->dev, "failed to register for %s\n",
@@ -153,6 +180,10 @@ static int led_pwm_probe(struct platform_device *pdev)
led_dat->cdev.max_brightness = cur_led->max_brightness;
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+ led_dat->can_sleep = pwm_can_sleep(led_dat->pwm);
+ if (led_dat->can_sleep)
+ INIT_WORK(&led_dat->work, led_pwm_work);
+
ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
if (ret < 0)
goto err;
@@ -180,8 +211,11 @@ static int led_pwm_remove(struct platform_device *pdev)
struct led_pwm_priv *priv = platform_get_drvdata(pdev);
int i;
- for (i = 0; i < priv->num_leds; i++)
+ for (i = 0; i < priv->num_leds; i++) {
led_classdev_unregister(&priv->leds[i].cdev);
+ if (priv->leds[i].can_sleep)
+ cancel_work_sync(&priv->leds[i].work);
+ }
return 0;
}
--
1.7.5.4
^ permalink raw reply related
* [PATCH] arm: zynq: Add missing irqchip.h to common.c
From: Rob Herring @ 2013-01-28 14:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1359376250-18841-1-git-send-email-michal.simek@xilinx.com>
On 01/28/2013 06:30 AM, Michal Simek wrote:
> The patch: "ARM: use common irqchip_init for GIC init"
> (sha1: 0529e315bbda5d502c93df2cfafba9bb337fbdf4)
> should also add linux/irqchip.h header.
>
> Error message:
> arch/arm/mach-zynq/common.c:99:14: error: 'irqchip_init'
> undeclared here (not in a function)
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
FYI, there's already a patch posted for this:
http://www.spinics.net/lists/arm-kernel/msg219556.html
Rob
> ---
> arch/arm/mach-zynq/common.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
> index 6472a69..cf3ec54 100644
> --- a/arch/arm/mach-zynq/common.c
> +++ b/arch/arm/mach-zynq/common.c
> @@ -24,6 +24,7 @@
> #include <linux/of_irq.h>
> #include <linux/of_platform.h>
> #include <linux/of.h>
> +#include <linux/irqchip.h>
>
> #include <asm/mach/arch.h>
> #include <asm/mach/map.h>
>
^ permalink raw reply
* [PATCH 0/2] Uncompress debug for multiplatform
From: Shawn Guo @ 2013-01-28 14:22 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20130128141947.GA11626@S2101-09.ap.freescale.net>
Sorry, Russell. I meant to put your email address on To.
Shawn
On Mon, Jan 28, 2013 at 10:19:51PM +0800, Russell King wrote:
> On Thu, Jan 17, 2013 at 11:21:57PM +0800, Shawn Guo wrote:
> > It's not about running single zImage on multiple platforms with
> > uncompress debug output, but having uncompress debug work for platform
> > that DEBUG_LL is enabled for. But still it's better than nothing.
> >
> > Shawn Guo (2):
> > ARM: use Kconfig to select uncompress.h
> > ARM: use DEBUG_LL infrastructural for multiplatform uncompress debug
>
> Just put them into patch tracker as #7633 and #7634.
>
> Shawn
>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox