* [PATCH v2] ARM: asm: rename logical shift macros push pull into lspush lspull
From: Nicolas Pitre @ 2014-02-11 20:31 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CAA3XUr3rhbooaTjDwhXVgWxnKV3-1fFNHGVTGsyAjpJrbxiQRQ@mail.gmail.com>
On Tue, 11 Feb 2014, Victor Kamensky wrote:
> On 11 February 2014 11:36, Victor Kamensky <victor.kamensky@linaro.org> wrote:
> > On 11 February 2014 09:58, Nicolas Pitre <nicolas.pitre@linaro.org> wrote:
> >> On Tue, 11 Feb 2014, Dave Martin wrote:
> >>
> >>> On Tue, Feb 11, 2014 at 12:09:35PM -0500, Nicolas Pitre wrote:
> >>> > On Tue, 11 Feb 2014, Dave Martin wrote:
> >>> >
> >>> > > On Mon, Feb 10, 2014 at 04:30:01PM -0500, Nicolas Pitre wrote:
> >>> > > > On Mon, 10 Feb 2014, Victor Kamensky wrote:
> >>> > > >
> >>> > > > > Renames logical shift macros, 'push' and 'pull', defined in
> >>> > > > > arch/arm/include/asm/assembler.h, into 'lspush' and 'lspull'.
> >>> > > >
> >>> > > > I don't have any fundamental objection to the idea, except maybe for the
> >>> > > > actual names. I just can't come up with anything better though.
> >>> > >
> >>> > > For consistency with the get_byte_ stuff, how about:
> >>> > >
> >>> > > push -> towards_byte_0
> >>> > > pull -> from_byte_0
> >>> > >
> >>> > > That may make the purpose a little clearer, too.
> >>> >
> >>> > I don't know if
> >>> >
> >>> > mov r0, r1, from_byte_0 #8
> >>> >
> >>> > is that much clearer though.
> >>> >
> >>> > > (Assuming I've got them the right way around...)
> >>> >
> >>> > As you later noticed you got it wrong. :-)
> >>> > Most likely because "full from" and "push towards" are common english
> >>> > constructs.
> >>>
> >>> No more so than "pull towards" and "push from".
> >>
> >> OK. I'll trust you on that account.
> >>
> >>> I'll blame it on the fact that the get_byte_ macros have wrong-
> >>> endian numbering, which I didn't look at carefully enough ;)
> >>>
> >>> But I think we proved that my suggestion didn't really make things
> >>> easier to understand...
> >>
> >> What about:
> >>
> >> push -> next
> >> pull -> prev
> >>
> >> ?
> >>
> >> That would make:
> >>
> >> mov r0, r1, next #8
> >
> > I am not native English speaker, so subtle details of your
> > discussion go above my head :). For me those tokens
> > were just symbols with specific meaning of logical shifts
> > and selected endianness. I'll do as you decide. Quick
> > grep over .S files under arch/arm seems 'next' and 'prev'
> > will be OK and I did build that confirms that.
>
> Forgot to mention one detail. There is a case in
> ./nwfpe/entry.S file where 'next' is used as label name. I guess,
> it should work if macro would rename it into lsl or lsr label
> name. And/or we could rename the label.
>
> Wondering ... whether idea to have those macros
> name in way that coincides with English words would lead
> us to some conflict earlier or latter. With this respect lspull
> and lspush IMHO are somewhat better because they are
> sort of abbreviations.
Agreed. I think it was worth exploring different alternatives, but
nothing really better came out.
Nicolas
^ permalink raw reply
* [PATCH] drm/msm: drop ARCH_MSM Kconfig depend
From: Rob Clark @ 2014-02-11 20:32 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392150119-21132-1-git-send-email-galak@codeaurora.org>
On Tue, Feb 11, 2014 at 3:21 PM, Kumar Gala <galak@codeaurora.org> wrote:
> The ARCH_MSM depend is redundant with ARCH_MSM8960, so we can remove it.
> Additionally, we are splitting Qualcomm MSM support into legacy (ARCH_MSM)
> and multiplatform (ARCH_QCOM). The MSM8960 with be ARCH_QCOM going forward
> so dropping ARCH_MSM will work properly for the new ARCH_QCOM multiplatform
> build.
>
> Signed-off-by: Kumar Gala <galak@codeaurora.org>
Acked-by: Rob Clark <robdclark@gmail.com>
> ---
> David/Rob,
>
> If you can ack this I'll send it via linux-qcom/arm-soc tree's
>
> thanks
>
> - k
> drivers/gpu/drm/msm/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
> index c69d1e0..b698497 100644
> --- a/drivers/gpu/drm/msm/Kconfig
> +++ b/drivers/gpu/drm/msm/Kconfig
> @@ -3,7 +3,7 @@ config DRM_MSM
> tristate "MSM DRM"
> depends on DRM
> depends on MSM_IOMMU
> - depends on (ARCH_MSM && ARCH_MSM8960) || (ARM && COMPILE_TEST)
> + depends on ARCH_MSM8960 || (ARM && COMPILE_TEST)
> select DRM_KMS_HELPER
> select SHMEM
> select TMPFS
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
>
^ permalink raw reply
* [PATCH v4 0/2] [RESEND] Lager and Koelsch reference serial port support
From: Laurent Pinchart @ 2014-02-11 20:34 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
This patch set enables the serial port DT devices for the Lager and Koelsch
reference boards.
The previous "[PATCH v3 0/4] Lager and Koelsch reference serial port support"
series that contained these two patches got partially merged in v3.14-rc1. This
is a resent of the left-overs that we have decided to push back to v3.15,
rebased on top of Simon's latest devel branch.
Laurent Pinchart (2):
ARM: shmobile: lager: Enable SCIF0 and SCIF1 serial ports in DT
ARM: shmobile: koelsch: Enable SCIF0 and SCIF1 serial ports in DT
arch/arm/boot/dts/r8a7790-lager.dts | 24 ++++++++++++++---
arch/arm/boot/dts/r8a7791-koelsch.dts | 24 ++++++++++++++---
arch/arm/mach-shmobile/board-koelsch-reference.c | 18 ++-----------
arch/arm/mach-shmobile/board-lager-reference.c | 18 ++-----------
arch/arm/mach-shmobile/clock-r8a7790.c | 16 +++++------
arch/arm/mach-shmobile/clock-r8a7791.c | 24 ++++++++---------
arch/arm/mach-shmobile/setup-r8a7790.c | 26 +++++++++---------
arch/arm/mach-shmobile/setup-r8a7791.c | 34 ++++++++++++------------
8 files changed, 94 insertions(+), 90 deletions(-)
--
Regards,
Laurent Pinchart
^ permalink raw reply
* [PATCH v4 1/2] ARM: shmobile: lager: Enable SCIF0 and SCIF1 serial ports in DT
From: Laurent Pinchart @ 2014-02-11 20:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392150878-10436-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
SCIF0 and SCIF1 are used as debug serial ports. Enable them and
configure pinmuxing appropriately. We can now remove the clkdev
registration hack for SCIF devices from the Lager reference board file.
As a side effect of switching to DT-based serial port instantiation,
ttySC6 and ttySC7 get renamed to ttySC0 and ttySC1. As the device tree
source if now shared between lager and lager-reference, we need to
update the serial ports in C code as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
arch/arm/boot/dts/r8a7790-lager.dts | 24 ++++++++++++++++++++----
arch/arm/mach-shmobile/board-lager-reference.c | 18 ++----------------
arch/arm/mach-shmobile/clock-r8a7790.c | 16 ++++++++--------
arch/arm/mach-shmobile/setup-r8a7790.c | 26 +++++++++++++-------------
4 files changed, 43 insertions(+), 41 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 1081c5e..4199ae4 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -16,8 +16,13 @@
model = "Lager";
compatible = "renesas,lager", "renesas,r8a7790";
+ aliases {
+ serial0 = &scif0;
+ serial1 = &scif1;
+ };
+
chosen {
- bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "console=ttySC0,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
};
memory at 40000000 {
@@ -63,9 +68,6 @@
};
&pfc {
- pinctrl-0 = <&scif0_pins &scif1_pins>;
- pinctrl-names = "default";
-
scif0_pins: serial0 {
renesas,groups = "scif0_data";
renesas,function = "scif0";
@@ -95,3 +97,17 @@
&sata1 {
status = "okay";
};
+
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif1 {
+ pinctrl-0 = <&scif1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index dc8d76b..35fc0f2 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -31,24 +31,10 @@ static void __init lager_add_standard_devices(void)
{
#ifdef CONFIG_COMMON_CLK
/*
- * This is a really crude hack to provide clkdev support to the SCIF
- * and CMT devices until they get moved to DT.
+ * This is a really crude hack to provide clkdev support to the CMT
+ * device until it gets moved to DT.
*/
- static const char * const scif_names[] = {
- "scifa0", "scifa1", "scifb0", "scifb1",
- "scifb2", "scifa2", "scif0", "scif1",
- "hscif0", "hscif1",
- };
struct clk *clk;
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
- clk = clk_get(NULL, scif_names[i]);
- if (!IS_ERR(clk)) {
- clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
- clk_put(clk);
- }
- }
clk = clk_get(NULL, "cmt0");
if (!IS_ERR(clk)) {
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index 08a2803..4b276ef 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -318,14 +318,14 @@ static struct clk_lookup lookups[] = {
/* MSTP */
CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP1005]),
- CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
- CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
- CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
- CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
- CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
- CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]),
- CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]),
- CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
+ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP721]),
+ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP720]),
+ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP204]),
+ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP203]),
+ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP206]),
+ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]),
+ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP216]),
+ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP202]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index c4616f0..b237268 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -221,14 +221,14 @@ static struct resource scif##index##_resources[] = { \
__R8A7790_SCIF(PORT_HSCIF, SCSCR_RE | SCSCR_TE, \
index, baseaddr, irq)
-R8A7790_SCIFA(0, 0xe6c40000, gic_spi(144)); /* SCIFA0 */
-R8A7790_SCIFA(1, 0xe6c50000, gic_spi(145)); /* SCIFA1 */
-R8A7790_SCIFB(2, 0xe6c20000, gic_spi(148)); /* SCIFB0 */
-R8A7790_SCIFB(3, 0xe6c30000, gic_spi(149)); /* SCIFB1 */
-R8A7790_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */
-R8A7790_SCIFA(5, 0xe6c60000, gic_spi(151)); /* SCIFA2 */
-R8A7790_SCIF(6, 0xe6e60000, gic_spi(152)); /* SCIF0 */
-R8A7790_SCIF(7, 0xe6e68000, gic_spi(153)); /* SCIF1 */
+R8A7790_SCIF(0, 0xe6e60000, gic_spi(152)); /* SCIF0 */
+R8A7790_SCIF(1, 0xe6e68000, gic_spi(153)); /* SCIF1 */
+R8A7790_SCIFA(2, 0xe6c40000, gic_spi(144)); /* SCIFA0 */
+R8A7790_SCIFA(3, 0xe6c50000, gic_spi(145)); /* SCIFA1 */
+R8A7790_SCIFB(4, 0xe6c20000, gic_spi(148)); /* SCIFB0 */
+R8A7790_SCIFB(5, 0xe6c30000, gic_spi(149)); /* SCIFB1 */
+R8A7790_SCIFB(6, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */
+R8A7790_SCIFA(7, 0xe6c60000, gic_spi(151)); /* SCIFA2 */
R8A7790_HSCIF(8, 0xe62c0000, gic_spi(154)); /* HSCIF0 */
R8A7790_HSCIF(9, 0xe62c8000, gic_spi(155)); /* HSCIF1 */
@@ -290,6 +290,11 @@ static const struct resource cmt00_resources[] __initconst = {
void __init r8a7790_add_dt_devices(void)
{
+ r8a7790_register_cmt(00);
+}
+
+void __init r8a7790_add_standard_devices(void)
+{
r8a7790_register_scif(0);
r8a7790_register_scif(1);
r8a7790_register_scif(2);
@@ -300,11 +305,6 @@ void __init r8a7790_add_dt_devices(void)
r8a7790_register_scif(7);
r8a7790_register_scif(8);
r8a7790_register_scif(9);
- r8a7790_register_cmt(00);
-}
-
-void __init r8a7790_add_standard_devices(void)
-{
r8a7790_add_dt_devices();
r8a7790_register_irqc(0);
r8a7790_register_thermal();
--
1.8.3.2
^ permalink raw reply related
* [PATCH v4 2/2] ARM: shmobile: koelsch: Enable SCIF0 and SCIF1 serial ports in DT
From: Laurent Pinchart @ 2014-02-11 20:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392150878-10436-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
SCIF0 and SCIF1 are used as debug serial ports. Enable them and
configure pinmuxing appropriately. We can now remove the clkdev
registration hack for SCIF devices from the Koelsch reference board
file.
As a side effect of switching to DT-based serial port instantiation,
ttySC6 and ttySC7 get renamed to ttySC0 and ttySC1. As the device tree
source if now shared between koelsch and koelsch-reference, we need to
update the serial ports in C code as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 24 ++++++++++++++---
arch/arm/mach-shmobile/board-koelsch-reference.c | 18 ++-----------
arch/arm/mach-shmobile/clock-r8a7791.c | 24 ++++++++---------
arch/arm/mach-shmobile/setup-r8a7791.c | 34 ++++++++++++------------
4 files changed, 51 insertions(+), 49 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index d4b9bba..42fd5eb 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -17,8 +17,13 @@
model = "Koelsch";
compatible = "renesas,koelsch", "renesas,r8a7791";
+ aliases {
+ serial0 = &scif0;
+ serial1 = &scif1;
+ };
+
chosen {
- bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "console=ttySC0,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
};
memory at 40000000 {
@@ -109,9 +114,6 @@
};
&pfc {
- pinctrl-0 = <&scif0_pins &scif1_pins>;
- pinctrl-names = "default";
-
scif0_pins: serial0 {
renesas,groups = "scif0_data_d";
renesas,function = "scif0";
@@ -132,6 +134,20 @@
status = "okay";
};
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif1 {
+ pinctrl-0 = <&scif1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&spi {
pinctrl-0 = <&qspi_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c
index feb8d97..46879d6 100644
--- a/arch/arm/mach-shmobile/board-koelsch-reference.c
+++ b/arch/arm/mach-shmobile/board-koelsch-reference.c
@@ -32,24 +32,10 @@ static void __init koelsch_add_standard_devices(void)
{
#ifdef CONFIG_COMMON_CLK
/*
- * This is a really crude hack to provide clkdev support to the SCIF
- * and CMT devices until they get moved to DT.
+ * This is a really crude hack to provide clkdev support to the CMT
+ * device until they get moved to DT.
*/
- static const char * const scif_names[] = {
- "scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifa2",
- "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scifa3",
- "scifa4", "scifa5",
- };
struct clk *clk;
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
- clk = clk_get(NULL, scif_names[i]);
- if (!IS_ERR(clk)) {
- clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
- clk_put(clk);
- }
- }
clk = clk_get(NULL, "cmt0");
if (!IS_ERR(clk)) {
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index c8227b3..fc9248d 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -209,18 +209,18 @@ static struct clk_lookup lookups[] = {
CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7791", &mstp_clks[MSTP726]),
CLKDEV_ICK_ID("du.0", "rcar-du-r8a7791", &mstp_clks[MSTP724]),
CLKDEV_ICK_ID("du.1", "rcar-du-r8a7791", &mstp_clks[MSTP723]),
- CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
- CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
- CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), /* SCIFB0 */
- CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), /* SCIFB1 */
- CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), /* SCIFB2 */
- CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]), /* SCIFA2 */
- CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]), /* SCIF0 */
- CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), /* SCIF1 */
- CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP719]), /* SCIF2 */
- CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP718]), /* SCIF3 */
- CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP715]), /* SCIF4 */
- CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP714]), /* SCIF5 */
+ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP721]), /* SCIF0 */
+ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP720]), /* SCIF1 */
+ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP719]), /* SCIF2 */
+ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP718]), /* SCIF3 */
+ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP715]), /* SCIF4 */
+ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP714]), /* SCIF5 */
+ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP204]), /* SCIFA0 */
+ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP203]), /* SCIFA1 */
+ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB0 */
+ CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP207]), /* SCIFB1 */
+ CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP216]), /* SCIFB2 */
+ CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP202]), /* SCIFA2 */
CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */
CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */
CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index e28404e..605f4cf 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -105,18 +105,18 @@ static struct resource scif##index##_resources[] = { \
#define R8A7791_SCIFB(index, baseaddr, irq) \
__R8A7791_SCIF(PORT_SCIFB, index, baseaddr, irq)
-R8A7791_SCIFA(0, 0xe6c40000, gic_spi(144)); /* SCIFA0 */
-R8A7791_SCIFA(1, 0xe6c50000, gic_spi(145)); /* SCIFA1 */
-R8A7791_SCIFB(2, 0xe6c20000, gic_spi(148)); /* SCIFB0 */
-R8A7791_SCIFB(3, 0xe6c30000, gic_spi(149)); /* SCIFB1 */
-R8A7791_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */
-R8A7791_SCIFA(5, 0xe6c60000, gic_spi(151)); /* SCIFA2 */
-R8A7791_SCIF(6, 0xe6e60000, gic_spi(152)); /* SCIF0 */
-R8A7791_SCIF(7, 0xe6e68000, gic_spi(153)); /* SCIF1 */
-R8A7791_SCIF(8, 0xe6e58000, gic_spi(22)); /* SCIF2 */
-R8A7791_SCIF(9, 0xe6ea8000, gic_spi(23)); /* SCIF3 */
-R8A7791_SCIF(10, 0xe6ee0000, gic_spi(24)); /* SCIF4 */
-R8A7791_SCIF(11, 0xe6ee8000, gic_spi(25)); /* SCIF5 */
+R8A7791_SCIF(0, 0xe6e60000, gic_spi(152)); /* SCIF0 */
+R8A7791_SCIF(1, 0xe6e68000, gic_spi(153)); /* SCIF1 */
+R8A7791_SCIF(2, 0xe6e58000, gic_spi(22)); /* SCIF2 */
+R8A7791_SCIF(3, 0xe6ea8000, gic_spi(23)); /* SCIF3 */
+R8A7791_SCIF(4, 0xe6ee0000, gic_spi(24)); /* SCIF4 */
+R8A7791_SCIF(5, 0xe6ee8000, gic_spi(25)); /* SCIF5 */
+R8A7791_SCIFA(6, 0xe6c40000, gic_spi(144)); /* SCIFA0 */
+R8A7791_SCIFA(7, 0xe6c50000, gic_spi(145)); /* SCIFA1 */
+R8A7791_SCIFB(8, 0xe6c20000, gic_spi(148)); /* SCIFB0 */
+R8A7791_SCIFB(9, 0xe6c30000, gic_spi(149)); /* SCIFB1 */
+R8A7791_SCIFB(10, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */
+R8A7791_SCIFA(11, 0xe6c60000, gic_spi(151)); /* SCIFA2 */
R8A7791_SCIFA(12, 0xe6c70000, gic_spi(29)); /* SCIFA3 */
R8A7791_SCIFA(13, 0xe6c78000, gic_spi(30)); /* SCIFA4 */
R8A7791_SCIFA(14, 0xe6c80000, gic_spi(31)); /* SCIFA5 */
@@ -185,6 +185,11 @@ static const struct resource thermal_resources[] __initconst = {
void __init r8a7791_add_dt_devices(void)
{
+ r8a7791_register_cmt(00);
+}
+
+void __init r8a7791_add_standard_devices(void)
+{
r8a7791_register_scif(0);
r8a7791_register_scif(1);
r8a7791_register_scif(2);
@@ -200,11 +205,6 @@ void __init r8a7791_add_dt_devices(void)
r8a7791_register_scif(12);
r8a7791_register_scif(13);
r8a7791_register_scif(14);
- r8a7791_register_cmt(00);
-}
-
-void __init r8a7791_add_standard_devices(void)
-{
r8a7791_add_dt_devices();
r8a7791_register_irqc(0);
r8a7791_register_thermal();
--
1.8.3.2
^ permalink raw reply related
* [PATCH] ARM: tegra: dalmore: fix irq trigger type
From: Thierry Reding @ 2014-02-11 20:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <4fcfcfdbc86c37c6d47ec32cdbd987f3b406e9b5.1392147256.git.stefan@agner.ch>
On Tue, Feb 11, 2014 at 09:11:32PM +0100, Stefan Agner wrote:
> Trigger type needs to be IRQ_TYPE_LEVEL_HIGH since the interrupt
> signal gets inverted by the PMC (configured by the invert-interrupt
> property).
Isn't the reason the other way around? The PMIC generates a low-level
interrupt, but the GIC can only be configured to accept high-level (or
rising edge) and therefore the nvidia,invert-interrupt property needs to
be set in the PMC node?
One nitpick below.
> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
[...]
> @@ -888,8 +888,9 @@
> palmas: tps65913 at 58 {
> compatible = "ti,palmas";
> reg = <0x58>;
> - interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
>
> + /* active-low configured by PMC invert-interrupt */
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
I'd prefer to keep the properties grouped as before. interrupts is a
"client" property, whereas #interrupt-cells and interrupt-controller
are "provider" properties.
And I think the comment would be more appropriate in the pmc node, for
the same reason that I think the commit description isn't entirely
accurate.
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140211/92fcdf86/attachment-0001.sig>
^ permalink raw reply
* [Patch v5 2/2] dmaengine: qcom_bam_dma: Add device tree binding
From: Kumar Gala @ 2014-02-11 20:56 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1391546556-27702-3-git-send-email-agross@codeaurora.org>
On Feb 4, 2014, at 2:42 PM, Andy Gross <agross@codeaurora.org> wrote:
> Add device tree binding support for the QCOM BAM DMA driver.
>
> Signed-off-by: Andy Gross <agross@codeaurora.org>
> ---
> .../devicetree/bindings/dma/qcom_bam_dma.txt | 48 ++++++++++++++++++++
> 1 file changed, 48 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
Acked-by: Kumar Gala <galak@codeaurora.org>
- k
>
> diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> new file mode 100644
> index 0000000..86344f1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> @@ -0,0 +1,48 @@
> +QCOM BAM DMA controller
> +
> +Required properties:
> +- compatible: Must be "qcom,bam-v1.4.0" for MSM8974 V1
> + Must be "qcom,bam-v1.4.1" for MSM8974 V2
> +- reg: Address range for DMA registers
> +- interrupts: single interrupt for this controller
> +- #dma-cells: must be <1>
> +- clocks: required clock
> +- clock-names: name of clock
> +- qcom,ee : indicates the active Execution Environment identifier (0-7)
> +
> +Example:
> +
> + uart-bam: dma at f9984000 = {
> + compatible = "qcom,bam-v1.4.1";
> + reg = <0xf9984000 0x15000>;
> + interrupts = <0 94 0>;
> + clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
> + clock-names = "bam_clk";
> + #dma-cells = <1>;
> + qcom,ee = <0>;
> + };
> +
> +Client:
> +Required properties:
> +- dmas: List of dma channel requests
> +- dma-names: Names of aforementioned requested channels
> +
> +Clients must use the format described in the dma.txt file, using a two cell
> +specifier for each channel.
> +
> +The three cells in order are:
> + 1. A phandle pointing to the DMA controller
> + 2. The channel number
> +
> +Example:
> + serial at f991e000 {
> + compatible = "qcom,msm-uart";
> + reg = <0xf991e000 0x1000>
> + <0xf9944000 0x19000>;
> + interrupts = <0 108 0>;
> + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> +
> + dmas = <&uart-bam 0>, <&uart-bam 1>;
> + dma-names = "rx", "tx";
> + };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply
* [PATCH 09/12] hwmon: vexpress: Use devm helper for hwmon device registration
From: Arnd Bergmann @ 2014-02-11 20:57 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392138636-29240-10-git-send-email-pawel.moll@arm.com>
On Tuesday 11 February 2014, Pawel Moll wrote:
> -#define VEXPRESS_HWMON_ATTRS(_name, _label_attr, _input_attr) \
> -struct attribute *vexpress_hwmon_attrs_##_name[] = { \
> - &dev_attr_name.attr, \
> - &dev_attr_##_label_attr.attr, \
> - &sensor_dev_attr_##_input_attr.dev_attr.attr, \
> - NULL \
> -}
> +#define VEXPRESS_HWMON_ATTR_GROUPS(_name, _label_attr, _input_attr) \
> +static struct attribute *vexpress_hwmon_##_name##_attrs[] = { \
> + &dev_attr_##_label_attr.attr, \
> + &sensor_dev_attr_##_input_attr.dev_attr.attr, \
> + NULL \
> +}; \
> +ATTRIBUTE_GROUPS(vexpress_hwmon_##_name)
>
> #if !defined(CONFIG_REGULATOR_VEXPRESS)
> static DEVICE_ATTR(in1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
> static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, vexpress_hwmon_u32_show,
> NULL, 1000);
> -static VEXPRESS_HWMON_ATTRS(volt, in1_label, in1_input);
> -static struct attribute_group vexpress_hwmon_group_volt = {
> - .attrs = vexpress_hwmon_attrs_volt,
> -};
> +VEXPRESS_HWMON_ATTR_GROUPS(volt, in1_label, in1_input);
Maybe it would be a good time to get rid of the obfuscation here and just
open-code the attribute groups rather than defining another macro.
I understand you want to save a few source lines, but it really helps
readability if you can search for the attribute groups when they
are referenced later. Just because the common driver model code uses
macros with string concatenation doesn't mean it's a good idea to
do the same in a device driver.
Arnd
^ permalink raw reply
* [Patch v5 1/2] dmaengine: add Qualcomm BAM dma driver
From: Andy Gross @ 2014-02-11 20:58 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20140211173048.GP10628@intel.com>
On Tue, Feb 11, 2014 at 11:00:48PM +0530, Vinod Koul wrote:
> On Tue, Feb 04, 2014 at 02:42:35PM -0600, Andy Gross wrote:
> > Add the DMA engine driver for the QCOM Bus Access Manager (BAM) DMA controller
> > found in the MSM 8x74 platforms.
> >
[.....]
> > + * QCOM BAM DMA engine driver
> > + *
> > + * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
> This is bit strange, usually copyright is retained by your employer, but I am
> fine with it :)
The short answer is that this is due to legal requirements.
> > +struct bam_desc_hw {
> > + u32 addr; /* Buffer physical address */
> this is where we might have an issue. Is this the DMA register which is 32bit
> wide or you are descibing it so.
> Will this work if you are in 64 bit?
In later implementations, they add 6 more bits to the address field from some of
the reserved bits in the flags. I am not sure what the solution will be for 64
bit, but it may very well be a slightly different descriptor. We'll have to
address this when we add support for chips requiring that functionality.
> > + u16 size; /* Buffer size in bytes */
> > + u16 flags;
> > +};
[....]
> > +
> > + /* reset channel */
> > + writel_relaxed(1, bdev->regs + BAM_P_RST(bchan->id));
> > + writel_relaxed(0, bdev->regs + BAM_P_RST(bchan->id));
> > +
> > + /* don't allow reorder of the channel reset */
> > + wmb();
> Documentation/memory-barriers.txt describes wmb() as a CPU barier but based on
> above you want it to be a compiler barrier then you should do 1st write,
> barrier(), second write.
Sorry, the comment was not clear. I need to reword this. On the Krait,
accesses within a 1k band are not allowed to be reordered. This memory barrier
is to make sure that no reordering is allowed past the call to this function.
> > +
> > + /* make sure hw is initialized when channel is used the first time */
> > + bchan->initialized = 0;
> > +}
> okay why no locks held while reset?
This function is called from 2 places. One is during the freeing of the
channel. The other is when starting the channel (protected via vc.lock). I was
thinking this was safe, but it's easy enough to add a lock around the
bam_reset_channel in the bam_chan_init_hw() and then add a comment to the reset
function saying that a lock is required.
[.....]
> > +
> > + /* set fixed direction and mode, then enable channel */
> > + val = P_EN | P_SYS_MODE;
> > + if (dir == DMA_DEV_TO_MEM)
> > + val |= P_DIRECTION;
> > +
> > + /* make sure the other stores occur before enabling channel */
> > + wmb();
> here again!
I need to reword. The various registers are over 1K boundaries, so the barrier
is required to make sure that all the settings are not allowed to be reordered
past the channel enable.
> > + writel_relaxed(val, bdev->regs + BAM_P_CTRL(bchan->id));
> > +
> > + bchan->initialized = 1;
> > +
> > + /* init FIFO pointers */
> > + bchan->head = 0;
> > + bchan->tail = 0;
> > +}
> > +
> > +/**
> > + * bam_alloc_chan - Allocate channel resources for DMA channel.
> > + * @chan: specified channel
> > + *
> > + * This function allocates the FIFO descriptor memory
> > + */
> > +static int bam_alloc_chan(struct dma_chan *chan)
> > +{
> > + struct bam_chan *bchan = to_bam_chan(chan);
> > + struct bam_device *bdev = bchan->bdev;
> > +
> > + /* allocate FIFO descriptor space, but only if necessary */
> > + if (!bchan->fifo_virt) {
> > + bchan->fifo_virt = dma_alloc_writecombine(bdev->dev,
> > + BAM_DESC_FIFO_SIZE, &bchan->fifo_phys,
> > + GFP_KERNEL);
> > +
> > + if (!bchan->fifo_virt) {
> > + dev_err(bdev->dev, "Failed to allocate desc fifo\n");
> > + return -ENOMEM;
> > + }
> > + }
> > +
> > + return BAM_DESC_FIFO_SIZE;
> But you cna have SW descriptors more than HW ones and issue new ones once HW is
> done with them. Why tie the limit to what HW supports and not create a better
> driver?
Given that the virt-dma only allows me to have one outstanding transaction that
consumes the fifo, and that I allocate descriptors from kzalloc, this would be
as many as you can get until you go OOM.
The slave_sg() doesn't pull from a pool of descriptors. It uses kzalloc. So
what value should I use for return value? Most drivers use 1.
[....]
> > +static void bam_slave_config(struct bam_chan *bchan,
> > + struct dma_slave_config *cfg)
> > +{
> > + struct bam_device *bdev = bchan->bdev;
> > + u32 maxburst;
> > +
> > + if (bchan->slave.direction == DMA_DEV_TO_MEM)
> > + maxburst = bchan->slave.src_maxburst = cfg->src_maxburst;
> > + else
> > + maxburst = bchan->slave.dst_maxburst = cfg->dst_maxburst;
> can you remove usage of slave.direction have save both. I am going to remove
> this member...
>
Yes. no problem.
[....]
> > +
> > +
> > + /* allocate enough room to accomodate the number of entries */
> > + async_desc = kzalloc(sizeof(*async_desc) +
> > + (sg_len * sizeof(struct bam_desc_hw)), GFP_NOWAIT);
> this seems to assume that each sg entry length will not exceed the HW capablity.
> Does engine support any length descriptor, if not you may want to split to
> multiple.
Isn't this what the dma_set_max_seg_size supposed to fix? The client is not
supposed to send segments larger than the max segment you can take. If that is
true, then I have no issues.
> > +
> > + if (!async_desc) {
> > + dev_err(bdev->dev, "failed to allocate async descriptor\n");
> > + goto err_out;
> > + }
> > +
> > + async_desc->num_desc = sg_len;
> > + async_desc->curr_desc = async_desc->desc;
> > + async_desc->dir = direction;
> > +
> > + /* fill in descriptors, align hw descriptor to 8 bytes */
> > + desc = async_desc->desc;
> > + for_each_sg(sgl, sg, sg_len, i) {
> > + if (sg_dma_len(sg) > BAM_MAX_DATA_SIZE) {
> > + dev_err(bdev->dev, "segment exceeds max size\n");
> > + goto err_out;
> gottcha, okay why not split here to multiple descriptors with max size all but
> last?
The client exceeded my dma_max_seg_size. I reject that. If that is not an
allowed solution, then I have to fix my kzalloc size above and split it here.
[....]
> > +
> > + vchan_get_all_descriptors(&bchan->vc, &head);
> > + spin_unlock_irqrestore(&bchan->vc.lock, flag);
> > +
> > + vchan_dma_desc_free_list(&bchan->vc, &head);
> why drop the lock here, i dont think this one needs to be called with lock
> dropped, didnt see it garbbing.
It doesn't need lock. This func just iterates over the head and calls the
desc_free func.
[....]
> > + break;
> > + }
> empty line after each break would be appreciated.
Ok.
[....]
> > + if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) {
> > + u32 partial = MAX_DESCRIPTORS - bchan->tail;
> > +
> > + memcpy(&fifo[bchan->tail], desc,
> > + partial * sizeof(struct bam_desc_hw));
> > + memcpy(fifo, &desc[partial], (async_desc->xfer_len - partial) *
> > + sizeof(struct bam_desc_hw));
> > + } else {
> > + memcpy(&fifo[bchan->tail], desc,
> > + async_desc->xfer_len * sizeof(struct bam_desc_hw));
> where is the destination memeory located, device or system memory. I think
> later, right?
The destination is the system memory being used for the hw fifo. This was
allocated using dma_alloc_writecombine.
> > + }
> > +
> > + bchan->tail += async_desc->xfer_len;
> > + bchan->tail %= MAX_DESCRIPTORS;
> > +
> > + /* ensure descriptor writes and dma start not reordered */
> > + wmb();
> > + writel_relaxed(bchan->tail * sizeof(struct bam_desc_hw),
> > + bdev->regs + BAM_P_EVNT_REG(bchan->id));
> > +}
> > +
>
> Overall driver loooks fine mostly with few comments as above.
>
> And yes for 2nd patch, would need someone to ACK it before we can appply this
Thanks for the comments. I'll get those done and see about getting the DT
ACK'd.
--
sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply
* [PATCH 02/12] power/reset: vexpress: Use udelay instead of timers
From: Arnd Bergmann @ 2014-02-11 20:59 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392138636-29240-3-git-send-email-pawel.moll@arm.com>
On Tuesday 11 February 2014, Pawel Moll wrote:
> At this stage of system shutdown procedure the jiffies may
> not be updated anymore, so just use udelay instead.
comment doesn't match code: s/udelay/mdelay/
> + mdelay(1000);
> }
Arnd
^ permalink raw reply
* [PATCH v2 0/9] ARM: multi-platform kconfig cleanup and mach-virt removal
From: Rob Herring @ 2014-02-11 21:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Rob Herring <robh@kernel.org>
This series removes common kconfig options required by multi-platform
builds out of individual platforms as they are redundant. Patches 2 and
3 make SMP and CACHE_L2X0 config options visible on MULTI_V7 builds as
most platforms enable these options and all platforms can run with them
enabled.
The previous version [1] was mainly a discussion about v6 vs. v6K.
Several platforms have this wrong and incorrectly select v6 when the
more optimal v6K option could be used. After more research, my memory
about i.MX31 was wrong and it does need to remain v6. I've tested the
v6K change on Rasp Pi. The default change to v6K for MULTI_V6 does not
switch any platforms. I don't plan to submit the v6K changes for
platforms without platform maintainers acks or testing.
Finally, patch 8 removes mach-virt as it is no longer needed. The core
ARM code can handle all the necessary initialization and mach-virt is
left as a kconfig option. Although not really related to this series,
it would otherwise conflict with it.
Rob
[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-December/216631.html
Rob Herring (9):
ARM: centralize common multi-platform kconfig options
ARM: select HAVE_SMP for V7 multi-platform
ARM: select MIGHT_HAVE_CACHE_L2X0 for V7 multi-platform
ARM: Select V6K instead of V6 by default for multi-platform
ARM: bcm2835: enable V6K instead of plain V6
ARM: cns3xxx: enable V6K instead of plain V6
ARM: vt8500: enable V6K instead of plain V6
ARM: virt: make mach-virt just a kconfig option
ARM: virt: select ARM_AMBA
arch/arm/Kconfig | 15 ++++++++++++---
arch/arm/Makefile | 1 -
arch/arm/mach-bcm/Kconfig | 5 -----
arch/arm/mach-bcm2835/Kconfig | 4 ----
arch/arm/mach-berlin/Kconfig | 4 ----
arch/arm/mach-cns3xxx/Kconfig | 3 ---
arch/arm/mach-highbank/Kconfig | 7 -------
arch/arm/mach-hisi/Kconfig | 4 ----
arch/arm/mach-imx/Kconfig | 14 --------------
arch/arm/mach-keystone/Kconfig | 4 ----
arch/arm/mach-moxart/Kconfig | 5 -----
arch/arm/mach-mvebu/Kconfig | 6 ------
arch/arm/mach-mxs/Kconfig | 4 ----
arch/arm/mach-nomadik/Kconfig | 5 -----
arch/arm/mach-nspire/Kconfig | 5 -----
arch/arm/mach-omap2/Kconfig | 17 -----------------
arch/arm/mach-picoxcell/Kconfig | 5 -----
arch/arm/mach-prima2/Kconfig | 6 ------
arch/arm/mach-rockchip/Kconfig | 3 ---
arch/arm/mach-shmobile/Kconfig | 5 -----
arch/arm/mach-socfpga/Kconfig | 7 -------
arch/arm/mach-spear/Kconfig | 10 ----------
arch/arm/mach-sti/Kconfig | 4 ----
arch/arm/mach-sunxi/Kconfig | 5 -----
arch/arm/mach-tegra/Kconfig | 8 --------
arch/arm/mach-u300/Kconfig | 6 ------
arch/arm/mach-ux500/Kconfig | 6 ------
arch/arm/mach-vexpress/Kconfig | 5 -----
arch/arm/mach-virt/Kconfig | 10 ----------
arch/arm/mach-virt/Makefile | 5 -----
arch/arm/mach-virt/virt.c | 41 -----------------------------------------
arch/arm/mach-vt8500/Kconfig | 4 ----
arch/arm/mach-zynq/Kconfig | 7 -------
33 files changed, 12 insertions(+), 228 deletions(-)
delete mode 100644 arch/arm/mach-virt/Kconfig
delete mode 100644 arch/arm/mach-virt/Makefile
delete mode 100644 arch/arm/mach-virt/virt.c
--
1.8.3.2
^ permalink raw reply
* [PATCH v2 1/9] ARM: centralize common multi-platform kconfig options
From: Rob Herring @ 2014-02-11 21:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392153119-23248-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <robh@kernel.org>
Multi-platform requires various kconfig options to be selected, so
platforms don't need to select them individually.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
---
arch/arm/Kconfig | 2 ++
arch/arm/mach-bcm/Kconfig | 5 -----
arch/arm/mach-bcm2835/Kconfig | 3 ---
arch/arm/mach-berlin/Kconfig | 3 ---
arch/arm/mach-cns3xxx/Kconfig | 1 -
arch/arm/mach-highbank/Kconfig | 6 ------
arch/arm/mach-hisi/Kconfig | 3 ---
arch/arm/mach-imx/Kconfig | 11 -----------
arch/arm/mach-keystone/Kconfig | 3 ---
arch/arm/mach-moxart/Kconfig | 5 -----
arch/arm/mach-mvebu/Kconfig | 5 -----
arch/arm/mach-mxs/Kconfig | 4 ----
arch/arm/mach-nomadik/Kconfig | 5 -----
arch/arm/mach-nspire/Kconfig | 5 -----
arch/arm/mach-omap2/Kconfig | 15 ---------------
arch/arm/mach-picoxcell/Kconfig | 4 ----
arch/arm/mach-prima2/Kconfig | 4 ----
arch/arm/mach-rockchip/Kconfig | 2 --
arch/arm/mach-shmobile/Kconfig | 3 ---
arch/arm/mach-socfpga/Kconfig | 6 ------
arch/arm/mach-spear/Kconfig | 8 --------
arch/arm/mach-sti/Kconfig | 2 --
arch/arm/mach-sunxi/Kconfig | 4 ----
arch/arm/mach-tegra/Kconfig | 6 ------
arch/arm/mach-u300/Kconfig | 6 ------
arch/arm/mach-ux500/Kconfig | 4 ----
arch/arm/mach-vexpress/Kconfig | 3 ---
arch/arm/mach-virt/Kconfig | 4 ----
arch/arm/mach-vt8500/Kconfig | 3 ---
arch/arm/mach-zynq/Kconfig | 5 -----
30 files changed, 2 insertions(+), 138 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e254198..72d5571 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -306,9 +306,11 @@ choice
config ARCH_MULTIPLATFORM
bool "Allow multiple platforms to be selected"
depends on MMU
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index b1aa6a9..af4f2df 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -16,12 +16,7 @@ config ARCH_BCM_MOBILE
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_GIC
- select CPU_V7
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- select GENERIC_TIME
select GPIO_BCM_KONA
- select SPARSE_IRQ
select TICK_ONESHOT
select CACHE_L2X0
select HAVE_ARM_ARCH_TIMER
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
index d1f9612..1c0decd 100644
--- a/arch/arm/mach-bcm2835/Kconfig
+++ b/arch/arm/mach-bcm2835/Kconfig
@@ -4,10 +4,7 @@ config ARCH_BCM2835
select ARM_AMBA
select ARM_ERRATA_411920
select ARM_TIMER_SP804
- select CLKDEV_LOOKUP
- select CLKSRC_OF
select CPU_V6
- select GENERIC_CLOCKEVENTS
select PINCTRL
select PINCTRL_BCM2835
help
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 7a02d22..b346f59 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -1,9 +1,7 @@
config ARCH_BERLIN
bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
select ARM_GIC
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select COMMON_CLK
select DW_APB_ICTL
select DW_APB_TIMER_OF
@@ -21,7 +19,6 @@ config MACH_BERLIN_BG2
config MACH_BERLIN_BG2CD
bool "Marvell Armada 1500-mini (BG2CD)"
select CACHE_L2X0
- select CPU_V7
select HAVE_ARM_TWD if SMP
endmenu
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index dbf0df8..e346688 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -2,7 +2,6 @@ config ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
select ARM_GIC
select CPU_V6K
- select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 0aded64..59274a7 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -5,7 +5,6 @@ config ARCH_HIGHBANK
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_HAS_OPP
select ARCH_SUPPORTS_BIG_ENDIAN
- select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
@@ -14,14 +13,9 @@ config ARCH_HIGHBANK
select ARM_PSCI
select ARM_TIMER_SP804
select CACHE_L2X0
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MAILBOX
select PL320_MBOX
- select SPARSE_IRQ
- select USE_OF
select ZONE_DMA if ARM_LPAE
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 1abae5f..95492d7 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -3,10 +3,7 @@ config ARCH_HI3xxx
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
- select ARCH_WANT_OPTIONAL_GPIOLIB
select CACHE_L2X0
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select HAVE_SMP
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 33567aa..3dd2c60 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -2,18 +2,12 @@ config ARCH_MXC
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
- select ARM_PATCH_PHYS_VIRT
select CLKSRC_MMIO
- select COMMON_CLK
select GENERIC_ALLOCATOR
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
- select MULTI_IRQ_HANDLER
select PINCTRL
select SOC_BUS
- select SPARSE_IRQ
- select USE_OF
help
Support for Freescale MXC/iMX-based family of processors
@@ -132,7 +126,6 @@ config SOC_IMX5
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_MXC_IOMUX_V3
- select CPU_V7
select MXC_TZIC
config SOC_IMX51
@@ -792,7 +785,6 @@ config SOC_IMX6Q
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
select ARM_GIC
- select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_IMX_ANATOP
@@ -817,7 +809,6 @@ config SOC_IMX6SL
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_GIC
- select CPU_V7
select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
@@ -833,9 +824,7 @@ config SOC_IMX6SL
config SOC_VF610
bool "Vybrid Family VF610 support"
- select CPU_V7
select ARM_GIC
- select CLKSRC_OF
select PINCTRL_VF610
select VF_PIT_TIMER
select PL310_ERRATA_588369 if CACHE_PL310
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 90a708f..00ed744 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -1,13 +1,10 @@
config ARCH_KEYSTONE
bool "Texas Instruments Keystone Devices"
depends on ARCH_MULTI_V7
- select CPU_V7
select ARM_GIC
select HAVE_ARM_ARCH_TIMER
select HAVE_SMP
select CLKSRC_MMIO
- select GENERIC_CLOCKEVENTS
- select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_ERRATA_798181 if SMP
select COMMON_CLK_KEYSTONE
select ARCH_SUPPORTS_BIG_ENDIAN
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index 3795ae2..95a6a4b 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -2,14 +2,9 @@ config ARCH_MOXART
bool "MOXA ART SoC" if ARCH_MULTI_V4T
select CPU_FA526
select ARM_DMA_MEM_BUFFERABLE
- select USE_OF
- select CLKSRC_OF
select CLKSRC_MMIO
- select HAVE_CLK
- select COMMON_CLK
select GENERIC_IRQ_CHIP
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_CLOCKEVENTS
select PHYLIB if NETDEVICES
help
Say Y here if you want to run your kernel on hardware with a
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 5e269d7..d581e84 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -2,15 +2,10 @@ config ARCH_MVEBU
bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
- select MULTI_IRQ_HANDLER
select PINCTRL
select PLAT_ORION
- select SPARSE_IRQ
- select CLKDEV_LOOKUP
select MVEBU_MBUS
select ZONE_DMA if ARM_LPAE
select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 8cde9e0..8479413 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -16,11 +16,7 @@ config ARCH_MXS
bool "Freescale MXS (i.MX23, i.MX28) support"
depends on ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
select CLKSRC_MMIO
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK_PREPARE
select PINCTRL
select SOC_BUS
select SOC_IMX23
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 4d42da4..486d301 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -6,16 +6,11 @@ config ARCH_NOMADIK
select ARM_VIC
select CLKSRC_NOMADIK_MTU
select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
- select CLKSRC_OF
- select COMMON_CLK
select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_NOMADIK
select PINCTRL_STN8815
- select SPARSE_IRQ
- select USE_OF
help
Support for the Nomadik platform by ST-Ericsson
diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
index 59d8f0a..bc41f26 100644
--- a/arch/arm/mach-nspire/Kconfig
+++ b/arch/arm/mach-nspire/Kconfig
@@ -3,14 +3,9 @@ config ARCH_NSPIRE
depends on ARCH_MULTI_V4_V5
depends on MMU
select CPU_ARM926T
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select SPARSE_IRQ
select ARM_AMBA
select ARM_VIC
select ARM_TIMER_SP804
- select USE_OF
- select CLKSRC_OF
help
This enables support for systems using the TI-NSPIRE CPU
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index e2ce4f8..d4eb5e9 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -6,7 +6,6 @@ config ARCH_OMAP2
depends on ARCH_MULTI_V6
select ARCH_OMAP2PLUS
select CPU_V6
- select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP3
@@ -15,8 +14,6 @@ config ARCH_OMAP3
select ARCH_OMAP2PLUS
select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
- select CPU_V7
- select MULTI_IRQ_HANDLER
select OMAP_INTERCONNECT
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
@@ -33,7 +30,6 @@ config ARCH_OMAP4
select ARM_ERRATA_720789
select ARM_GIC
select CACHE_L2X0
- select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
@@ -52,7 +48,6 @@ config SOC_OMAP5
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
select ARM_GIC
- select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
@@ -64,15 +59,11 @@ config SOC_AM33XX
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
- select CPU_V7
- select MULTI_IRQ_HANDLER
config SOC_AM43XX
bool "TI AM43x"
depends on ARCH_MULTI_V7
- select CPU_V7
select ARCH_OMAP2PLUS
- select MULTI_IRQ_HANDLER
select ARM_GIC
select MACH_OMAP_GENERIC
@@ -82,8 +73,6 @@ config SOC_DRA7XX
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
select ARM_GIC
- select CPU_V7
- select HAVE_SMP
select HAVE_ARM_ARCH_TIMER
config ARCH_OMAP2PLUS
@@ -94,17 +83,13 @@ config ARCH_OMAP2PLUS
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select MACH_OMAP_GENERIC
select OMAP_DM_TIMER
select PINCTRL
select PROC_DEVICETREE if PROC_FS
select SOC_BUS
- select SPARSE_IRQ
select TI_PRIV_EDMA
- select USE_OF
help
Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig
index b1022f4..c88ff74 100644
--- a/arch/arm/mach-picoxcell/Kconfig
+++ b/arch/arm/mach-picoxcell/Kconfig
@@ -1,12 +1,8 @@
config ARCH_PICOXCELL
bool "Picochip PicoXcell" if ARCH_MULTI_V6
select ARCH_REQUIRE_GPIOLIB
- select ARM_PATCH_PHYS_VIRT
select ARM_VIC
select CPU_V6K
select DW_APB_TIMER_OF
- select GENERIC_CLOCKEVENTS
select HAVE_TCM
select NO_IOPORT
- select SPARSE_IRQ
- select USE_OF
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 6988b11..16c2d90 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -1,7 +1,6 @@
config ARCH_SIRF
bool "CSR SiRF" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select MIGHT_HAVE_CACHE_L2X0
select NO_IOPORT
@@ -17,7 +16,6 @@ menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
config ARCH_ATLAS6
bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform"
default y
- select CPU_V7
select SIRF_IRQ
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
@@ -25,7 +23,6 @@ config ARCH_ATLAS6
config ARCH_PRIMA2
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
default y
- select CPU_V7
select SIRF_IRQ
select ZONE_DMA
help
@@ -35,7 +32,6 @@ config ARCH_MARCO
bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform"
default y
select ARM_GIC
- select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_SMP
select SMP_ON_UP if SMP
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index cf073de..2a695bc 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -7,8 +7,6 @@ config ARCH_ROCKCHIP
select CACHE_L2X0
select HAVE_ARM_TWD if SMP
select HAVE_SMP
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select DW_APB_TIMER_OF
select ARM_GLOBAL_TIMER
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 05fa505..6f24e9e 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -5,8 +5,6 @@ config ARCH_SHMOBILE_MULTI
bool "Renesas ARM SoCs" if ARCH_MULTI_V7
depends on MMU
select ARCH_SHMOBILE
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
@@ -16,7 +14,6 @@ config ARCH_SHMOBILE_MULTI
select NO_IOPORT
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
if ARCH_SHMOBILE_MULTI
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index aee77f0..2249137 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -1,17 +1,11 @@
config ARCH_SOCFPGA
bool "Altera SOCFPGA family" if ARCH_MULTI_V7
- select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_GIC
select CACHE_L2X0
- select COMMON_CLK
- select CPU_V7
select DW_APB_TIMER_OF
- select GENERIC_CLOCKEVENTS
select GPIO_PL061 if GPIOLIB
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MFD_SYSCON
- select SPARSE_IRQ
- select USE_OF
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index ac1710e6..a7a28ea 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -8,8 +8,6 @@ menuconfig PLAT_SPEAR
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select CLKSRC_MMIO
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
if PLAT_SPEAR
@@ -18,14 +16,12 @@ config ARCH_SPEAR13XX
depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
select ARCH_HAS_CPUFREQ
select ARM_GIC
- select CPU_V7
select GPIO_SPEAR_SPICS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
- select USE_OF
help
Supports for ARM's SPEAR13XX family
@@ -50,9 +46,7 @@ config ARCH_SPEAR3XX
depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
depends on !ARCH_SPEAR13XX
select ARM_VIC
- select CPU_ARM926T
select PINCTRL
- select USE_OF
help
Supports for ARM's SPEAR3XX family
@@ -83,14 +77,12 @@ config ARCH_SPEAR6XX
depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
depends on !ARCH_SPEAR13XX
select ARM_VIC
- select CPU_ARM926T
help
Supports for ARM's SPEAR6XX family
config MACH_SPEAR600
def_bool y
depends on ARCH_SPEAR6XX
- select USE_OF
help
Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig"
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index d71654b..9c6dda8 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -1,7 +1,5 @@
menuconfig ARCH_STI
bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7
- select GENERIC_CLOCKEVENTS
- select CLKDEV_LOOKUP
select ARM_GIC
select ARM_GLOBAL_TIMER
select PINCTRL
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index b9d6cad..201ef9b 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -5,14 +5,10 @@ config ARCH_SUNXI
select ARM_GIC
select ARM_PSCI
select CLKSRC_MMIO
- select CLKSRC_OF
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select HAVE_SMP
select PINCTRL
select PINCTRL_SUNXI
select RESET_CONTROLLER
- select SPARSE_IRQ
select SUN4I_TIMER
select SUN5I_HSTIMER
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index b1232d8..5dc3e38 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -5,10 +5,6 @@ config ARCH_TEGRA
select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
select ARM_GIC
select CLKSRC_MMIO
- select CLKSRC_OF
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
@@ -18,11 +14,9 @@ config ARCH_TEGRA
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
select SOC_BUS
- select SPARSE_IRQ
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select USB_ULPI if USB_PHY
select USB_ULPI_VIEWPORT if USB_PHY
- select USE_OF
help
This enables support for NVIDIA Tegra based systems.
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 8e23071..e3a96d7 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -3,20 +3,14 @@ config ARCH_U300
depends on MMU
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
- select ARM_PATCH_PHYS_VIRT
select ARM_VIC
select CLKSRC_MMIO
- select CLKSRC_OF
- select COMMON_CLK
select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
select HAVE_TCM
select PINCTRL
select PINCTRL_COH901
select PINCTRL_U300
- select SPARSE_IRQ
select MFD_SYSCON
- select USE_OF
help
Support for ST-Ericsson U300 series mobile platforms.
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 0034d2c..5d71c82 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -11,9 +11,6 @@ config ARCH_U8500
select ARM_GIC
select CACHE_L2X0
select CLKSRC_NOMADIK_MTU
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
@@ -76,7 +73,6 @@ config UX500_AUTO_PLATFORM
config MACH_UX500_DT
bool "Generic U8500 support using device tree"
depends on MACH_MOP500
- select USE_OF
endmenu
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 4a70be4..fa29222 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -5,10 +5,7 @@ config ARCH_VEXPRESS
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
- select COMMON_CLK
select COMMON_CLK_VERSATILE
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_PATA_PLATFORM
diff --git a/arch/arm/mach-virt/Kconfig b/arch/arm/mach-virt/Kconfig
index 081d469..eaad072 100644
--- a/arch/arm/mach-virt/Kconfig
+++ b/arch/arm/mach-virt/Kconfig
@@ -1,10 +1,6 @@
config ARCH_VIRT
bool "Dummy Virtual Machine" if ARCH_MULTI_V7
- select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select HAVE_ARM_ARCH_TIMER
select ARM_PSCI
select HAVE_SMP
- select CPU_V7
- select SPARSE_IRQ
- select USE_OF
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 927be93..c581ed2 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -3,8 +3,6 @@ config ARCH_VT8500
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
select VT8500_TIMER
select PINCTRL
help
@@ -29,6 +27,5 @@ config ARCH_WM8850
bool "WonderMedia WM8850"
depends on ARCH_MULTI_V7
select ARCH_VT8500
- select CPU_V7
help
Support for WonderMedia WM8850 System-on-Chip.
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 6b04260..85d1805 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -2,16 +2,11 @@ config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select ICST
select MIGHT_HAVE_CACHE_L2X0
- select USE_OF
select HAVE_SMP
- select SPARSE_IRQ
select CADENCE_TTC_TIMER
select ARM_GLOBAL_TIMER
help
--
1.8.3.2
^ permalink raw reply related
* [PATCH 2/9] ARM: select HAVE_SMP for V7 multi-platform
From: Rob Herring @ 2014-02-11 21:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392153119-23248-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <robh@kernel.org>
All V7 platforms can run SMP kernels, so make CONFIG_SMP visible for V7
multi-platform builds.
Signed-off-by: Rob Herring <robh@kernel.org>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-berlin/Kconfig | 1 -
arch/arm/mach-highbank/Kconfig | 1 -
arch/arm/mach-hisi/Kconfig | 1 -
arch/arm/mach-imx/Kconfig | 1 -
arch/arm/mach-keystone/Kconfig | 1 -
arch/arm/mach-mvebu/Kconfig | 1 -
arch/arm/mach-omap2/Kconfig | 2 --
arch/arm/mach-prima2/Kconfig | 1 -
arch/arm/mach-rockchip/Kconfig | 1 -
arch/arm/mach-shmobile/Kconfig | 1 -
arch/arm/mach-socfpga/Kconfig | 1 -
arch/arm/mach-spear/Kconfig | 1 -
arch/arm/mach-sti/Kconfig | 1 -
arch/arm/mach-sunxi/Kconfig | 1 -
arch/arm/mach-tegra/Kconfig | 1 -
arch/arm/mach-ux500/Kconfig | 1 -
arch/arm/mach-vexpress/Kconfig | 1 -
arch/arm/mach-zynq/Kconfig | 1 -
19 files changed, 1 insertion(+), 19 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 72d5571..a1f36e7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -917,6 +917,7 @@ config ARCH_MULTI_V7
default y
select ARCH_MULTI_V6_V7
select CPU_V7
+ select HAVE_SMP
config ARCH_MULTI_V6_V7
bool
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index b346f59..b0cb072 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -14,7 +14,6 @@ config MACH_BERLIN_BG2
select CACHE_L2X0
select CPU_PJ4B
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
config MACH_BERLIN_BG2CD
bool "Marvell Armada 1500-mini (BG2CD)"
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 59274a7..830b76e 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -15,7 +15,6 @@ config ARCH_HIGHBANK
select CACHE_L2X0
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select MAILBOX
select PL320_MBOX
select ZONE_DMA if ARM_LPAE
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 95492d7..9d0a87b 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -6,7 +6,6 @@ config ARCH_HI3xxx
select CACHE_L2X0
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select PINCTRL
select PINCTRL_SINGLE
help
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 3dd2c60..1a6a843 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -791,7 +791,6 @@ config SOC_IMX6Q
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
- select HAVE_SMP
select MFD_SYSCON
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 00ed744..f50bc93 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -3,7 +3,6 @@ config ARCH_KEYSTONE
depends on ARCH_MULTI_V7
select ARM_GIC
select HAVE_ARM_ARCH_TIMER
- select HAVE_SMP
select CLKSRC_MMIO
select ARM_ERRATA_798181 if SMP
select COMMON_CLK_KEYSTONE
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index d581e84..875a352 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -19,7 +19,6 @@ menu "Marvell SOC with device tree"
config MACH_ARMADA_370_XP
bool
select ARMADA_370_XP_TIMER
- select HAVE_SMP
select CACHE_L2X0
select CPU_PJ4B
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index d4eb5e9..922cbd8 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -32,7 +32,6 @@ config ARCH_OMAP4
select CACHE_L2X0
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select OMAP_INTERCONNECT
select PL310_ERRATA_588369
select PL310_ERRATA_727915
@@ -50,7 +49,6 @@ config SOC_OMAP5
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181 if SMP
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 16c2d90..59aa3ea 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -33,7 +33,6 @@ config ARCH_MARCO
default y
select ARM_GIC
select HAVE_ARM_SCU if SMP
- select HAVE_SMP
select SMP_ON_UP if SMP
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 2a695bc..6b2f586 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -6,7 +6,6 @@ config ARCH_ROCKCHIP
select ARM_GIC
select CACHE_L2X0
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select DW_APB_TIMER_OF
select ARM_GLOBAL_TIMER
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 6f24e9e..99f181d 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -7,7 +7,6 @@ config ARCH_SHMOBILE_MULTI
select ARCH_SHMOBILE
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select ARM_GIC
select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 2249137..b5f8d75 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -7,5 +7,4 @@ config ARCH_SOCFPGA
select GPIO_PL061 if GPIOLIB
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select MFD_SYSCON
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index a7a28ea..601b8d8 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -19,7 +19,6 @@ config ARCH_SPEAR13XX
select GPIO_SPEAR_SPICS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
help
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index 9c6dda8..c3fdcee 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -6,7 +6,6 @@ menuconfig ARCH_STI
select PINCTRL_ST
select MFD_SYSCON
select MIGHT_HAVE_CACHE_L2X0
- select HAVE_SMP
select HAVE_ARM_SCU if SMP
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_754322
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 201ef9b..9de27cf 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -6,7 +6,6 @@ config ARCH_SUNXI
select ARM_PSCI
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
- select HAVE_SMP
select PINCTRL
select PINCTRL_SUNXI
select RESET_CONTROLLER
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 5dc3e38..e596739 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -7,7 +7,6 @@ config ARCH_TEGRA
select CLKSRC_MMIO
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PINCTRL
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 5d71c82..731b919 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -13,7 +13,6 @@ config ARCH_U8500
select CLKSRC_NOMADIK_MTU
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_ABX500
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index fa29222..6cbddb8 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -9,7 +9,6 @@ config ARCH_VEXPRESS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_PATA_PLATFORM
- select HAVE_SMP
select ICST
select MIGHT_HAVE_CACHE_L2X0
select NO_IOPORT
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 85d1805..70e247d 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -6,7 +6,6 @@ config ARCH_ZYNQ
select HAVE_ARM_TWD if SMP
select ICST
select MIGHT_HAVE_CACHE_L2X0
- select HAVE_SMP
select CADENCE_TTC_TIMER
select ARM_GLOBAL_TIMER
help
--
1.8.3.2
^ permalink raw reply related
* [PATCH 3/9] ARM: select MIGHT_HAVE_CACHE_L2X0 for V7 multi-platform
From: Rob Herring @ 2014-02-11 21:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392153119-23248-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <robh@kernel.org>
Many V7 platforms have an L2x0 cache, so make CONFIG_MIGHT_HAVE_CACHE_L2X0
visible for V7 multi-platform builds.
Signed-off-by: Rob Herring <robh@kernel.org>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-cns3xxx/Kconfig | 1 -
arch/arm/mach-imx/Kconfig | 1 -
arch/arm/mach-prima2/Kconfig | 1 -
arch/arm/mach-shmobile/Kconfig | 1 -
arch/arm/mach-spear/Kconfig | 1 -
arch/arm/mach-sti/Kconfig | 1 -
arch/arm/mach-tegra/Kconfig | 1 -
arch/arm/mach-ux500/Kconfig | 1 -
arch/arm/mach-vexpress/Kconfig | 1 -
arch/arm/mach-zynq/Kconfig | 1 -
11 files changed, 1 insertion(+), 10 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a1f36e7..7560be4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -921,6 +921,7 @@ config ARCH_MULTI_V7
config ARCH_MULTI_V6_V7
bool
+ select MIGHT_HAVE_CACHE_L2X0
config ARCH_MULTI_CPU_AUTO
def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index e346688..c6f58a1 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -2,7 +2,6 @@ config ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
select ARM_GIC
select CPU_V6K
- select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
help
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 1a6a843..ff24473 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -5,7 +5,6 @@ config ARCH_MXC
select CLKSRC_MMIO
select GENERIC_ALLOCATOR
select GENERIC_IRQ_CHIP
- select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
select PINCTRL
select SOC_BUS
help
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 59aa3ea..2c726b4 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -2,7 +2,6 @@ config ARCH_SIRF
bool "CSR SiRF" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select GENERIC_IRQ_CHIP
- select MIGHT_HAVE_CACHE_L2X0
select NO_IOPORT
select PINCTRL
select PINCTRL_SIRF
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 99f181d..8a685ed 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -8,7 +8,6 @@ config ARCH_SHMOBILE_MULTI
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select ARM_GIC
- select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select NO_IOPORT
select PINCTRL
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 601b8d8..5c57262 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -19,7 +19,6 @@ config ARCH_SPEAR13XX
select GPIO_SPEAR_SPICS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
help
Supports for ARM's SPEAR13XX family
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index c3fdcee..d2c13ba 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -5,7 +5,6 @@ menuconfig ARCH_STI
select PINCTRL
select PINCTRL_ST
select MFD_SYSCON
- select MIGHT_HAVE_CACHE_L2X0
select HAVE_ARM_SCU if SMP
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_754322
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index e596739..f61cd5b 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -7,7 +7,6 @@ config ARCH_TEGRA
select CLKSRC_MMIO
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PINCTRL
select ARCH_HAS_RESET_CONTROLLER
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 731b919..8052bd5 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -13,7 +13,6 @@ config ARCH_U8500
select CLKSRC_NOMADIK_MTU
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_ABX500
select PINCTRL_NOMADIK
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 6cbddb8..80b4be3 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -10,7 +10,6 @@ config ARCH_VEXPRESS
select HAVE_ARM_TWD if SMP
select HAVE_PATA_PLATFORM
select ICST
- select MIGHT_HAVE_CACHE_L2X0
select NO_IOPORT
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 70e247d..105d39b 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -5,7 +5,6 @@ config ARCH_ZYNQ
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select ICST
- select MIGHT_HAVE_CACHE_L2X0
select CADENCE_TTC_TIMER
select ARM_GLOBAL_TIMER
help
--
1.8.3.2
^ permalink raw reply related
* [PATCH 4/9] ARM: Select V6K instead of V6 by default for multi-platform
From: Rob Herring @ 2014-02-11 21:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392153119-23248-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <robh@kernel.org>
MULTI_V6 should default to V6K as it is more optimal than V6. Any
platform which is not V6K should select CPU_V6 which will enable the
less optimal code paths.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Jamie Iles <jamie@jamieiles.com>
---
arch/arm/Kconfig | 2 +-
arch/arm/mach-cns3xxx/Kconfig | 2 +-
arch/arm/mach-imx/Kconfig | 1 -
arch/arm/mach-picoxcell/Kconfig | 1 -
4 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7560be4..f350ca5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -910,7 +910,7 @@ config ARCH_MULTI_V4_V5
config ARCH_MULTI_V6
bool "ARMv6 based platforms (ARM11)"
select ARCH_MULTI_V6_V7
- select CPU_V6
+ select CPU_V6K
config ARCH_MULTI_V7
bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index c6f58a1..b16b29a 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -1,9 +1,9 @@
config ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
select ARM_GIC
- select CPU_V6K
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
+ select CPU_V6
help
Support for Cavium Networks CNS3XXX platform.
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ff24473..41ffd43 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -114,7 +114,6 @@ config SOC_IMX31
config SOC_IMX35
bool
select ARCH_MXC_IOMUX_V3
- select CPU_V6K
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig
index c88ff74..eca9eb1 100644
--- a/arch/arm/mach-picoxcell/Kconfig
+++ b/arch/arm/mach-picoxcell/Kconfig
@@ -2,7 +2,6 @@ config ARCH_PICOXCELL
bool "Picochip PicoXcell" if ARCH_MULTI_V6
select ARCH_REQUIRE_GPIOLIB
select ARM_VIC
- select CPU_V6K
select DW_APB_TIMER_OF
select HAVE_TCM
select NO_IOPORT
--
1.8.3.2
^ permalink raw reply related
* [PATCH 5/9] ARM: bcm2835: enable V6K instead of plain V6
From: Rob Herring @ 2014-02-11 21:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392153119-23248-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <robh@kernel.org>
The bcm2835 is an ARM1176 which has all the V6K extensions except for SMP,
so V6K should be selected instead. Dropping the select will use
the default for ARCH_MULTI_V6 which is V6K.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
---
arch/arm/mach-bcm2835/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
index 1c0decd..3a36935 100644
--- a/arch/arm/mach-bcm2835/Kconfig
+++ b/arch/arm/mach-bcm2835/Kconfig
@@ -4,7 +4,6 @@ config ARCH_BCM2835
select ARM_AMBA
select ARM_ERRATA_411920
select ARM_TIMER_SP804
- select CPU_V6
select PINCTRL
select PINCTRL_BCM2835
help
--
1.8.3.2
^ permalink raw reply related
* [PATCH 6/9] ARM: cns3xxx: enable V6K instead of plain V6
From: Rob Herring @ 2014-02-11 21:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392153119-23248-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <robh@kernel.org>
The cns3xxx is an ARM11MPCore which has all the V6K extensions, so V6K
should be selected instead. Dropping the select will use the default for
ARCH_MULTI_V6 which is V6K.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Anton Vorontsov <anton@enomsg.org>
---
arch/arm/mach-cns3xxx/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index b16b29a..dce8dec 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -3,7 +3,6 @@ config ARCH_CNS3XXX
select ARM_GIC
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
- select CPU_V6
help
Support for Cavium Networks CNS3XXX platform.
--
1.8.3.2
^ permalink raw reply related
* [PATCH 7/9] ARM: vt8500: enable V6K instead of plain V6
From: Rob Herring @ 2014-02-11 21:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392153119-23248-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <robh@kernel.org>
The wm8750 is an ARM1176 which has all the V6K extensions except for SMP,
so V6K should be selected instead. Dropping the select will use the
default for ARCH_MULTI_V6 which is V6K.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Tony Prisk <linux@prisktech.co.nz>
---
arch/arm/mach-vt8500/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index c581ed2..08f56a4 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -19,7 +19,6 @@ config ARCH_WM8750
bool "WonderMedia WM8750"
depends on ARCH_MULTI_V6
select ARCH_VT8500
- select CPU_V6
help
Support for WonderMedia WM8750 System-on-Chip.
--
1.8.3.2
^ permalink raw reply related
* [PATCH 8/9] ARM: virt: make mach-virt just a kconfig option
From: Rob Herring @ 2014-02-11 21:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392153119-23248-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <robh@kernel.org>
The mach code for mach-virt is no longer needed, so we can remove all of
mach-virt except the kconfig entry.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
---
arch/arm/Kconfig | 8 ++++++--
arch/arm/Makefile | 1 -
arch/arm/mach-virt/Kconfig | 6 ------
arch/arm/mach-virt/Makefile | 5 -----
arch/arm/mach-virt/virt.c | 41 -----------------------------------------
5 files changed, 6 insertions(+), 55 deletions(-)
delete mode 100644 arch/arm/mach-virt/Kconfig
delete mode 100644 arch/arm/mach-virt/Makefile
delete mode 100644 arch/arm/mach-virt/virt.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f350ca5..9790c5d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -929,6 +929,12 @@ config ARCH_MULTI_CPU_AUTO
endmenu
+config ARCH_VIRT
+ bool "Dummy Virtual Machine" if ARCH_MULTI_V7
+ select ARM_GIC
+ select HAVE_ARM_ARCH_TIMER
+ select ARM_PSCI
+
#
# This is sorted alphabetically by mach-* pathname. However, plat-*
# Kconfigs may be included either alphabetically (according to the
@@ -1052,8 +1058,6 @@ source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-vexpress/Kconfig"
source "arch/arm/plat-versatile/Kconfig"
-source "arch/arm/mach-virt/Kconfig"
-
source "arch/arm/mach-vt8500/Kconfig"
source "arch/arm/mach-w90x900/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 08a9ef5..a3c06dd 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -199,7 +199,6 @@ machine-$(CONFIG_ARCH_U300) += u300
machine-$(CONFIG_ARCH_U8500) += ux500
machine-$(CONFIG_ARCH_VERSATILE) += versatile
machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
-machine-$(CONFIG_ARCH_VIRT) += virt
machine-$(CONFIG_ARCH_VT8500) += vt8500
machine-$(CONFIG_ARCH_W90X900) += w90x900
machine-$(CONFIG_ARCH_ZYNQ) += zynq
diff --git a/arch/arm/mach-virt/Kconfig b/arch/arm/mach-virt/Kconfig
deleted file mode 100644
index eaad072..0000000
--- a/arch/arm/mach-virt/Kconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-config ARCH_VIRT
- bool "Dummy Virtual Machine" if ARCH_MULTI_V7
- select ARM_GIC
- select HAVE_ARM_ARCH_TIMER
- select ARM_PSCI
- select HAVE_SMP
diff --git a/arch/arm/mach-virt/Makefile b/arch/arm/mach-virt/Makefile
deleted file mode 100644
index 7ddbfa6..0000000
--- a/arch/arm/mach-virt/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y := virt.o
diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c
deleted file mode 100644
index b184e57..0000000
--- a/arch/arm/mach-virt/virt.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Dummy Virtual Machine - does what it says on the tin.
- *
- * Copyright (C) 2012 ARM Ltd
- * Authors: Will Deacon <will.deacon@arm.com>,
- * Marc Zyngier <marc.zyngier@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/smp.h>
-
-#include <asm/mach/arch.h>
-
-static void __init virt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *virt_dt_match[] = {
- "linux,dummy-virt",
- "xen,xenvm",
- NULL
-};
-
-DT_MACHINE_START(VIRT, "Dummy Virtual Machine")
- .init_machine = virt_init,
- .dt_compat = virt_dt_match,
-MACHINE_END
--
1.8.3.2
^ permalink raw reply related
* [PATCH 9/9] ARM: virt: select ARM_AMBA
From: Rob Herring @ 2014-02-11 21:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392153119-23248-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <robh@kernel.org>
Guests can use AMBA bus devices such as the PL011 uart, so enable the
AMBA bus for mach-virt.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
---
arch/arm/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9790c5d..25a6b53 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -931,9 +931,10 @@ endmenu
config ARCH_VIRT
bool "Dummy Virtual Machine" if ARCH_MULTI_V7
+ select ARM_AMBA
select ARM_GIC
- select HAVE_ARM_ARCH_TIMER
select ARM_PSCI
+ select HAVE_ARM_ARCH_TIMER
#
# This is sorted alphabetically by mach-* pathname. However, plat-*
--
1.8.3.2
^ permalink raw reply related
* [PATCHv3 0/2] Remove ARM meminfo
From: Laura Abbott @ 2014-02-11 21:14 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
This is v3 of the patch to remove meminfo from arm and use memblock
directly. Testing an
Thanks,
Laura
v3: Fixed compilation issue for CONFIG_SPARSEMEM. Fixed several typos
in spitz.c. Removed early_init_dt_add_memory_arch per Grant's suggestion.
v2: Implemented full commandline support for mem at addr
Laura Abbott (2):
mm/memblock: add memblock_get_current_limit
arm: Get rid of meminfo
arch/arm/include/asm/mach/arch.h | 4 +-
arch/arm/include/asm/memblock.h | 3 +-
arch/arm/include/asm/setup.h | 23 ------
arch/arm/kernel/atags_parse.c | 5 +-
arch/arm/kernel/devtree.c | 5 --
arch/arm/kernel/setup.c | 30 ++------
arch/arm/mach-clps711x/board-clep7312.c | 7 +-
arch/arm/mach-clps711x/board-edb7211.c | 10 +--
arch/arm/mach-clps711x/board-p720t.c | 2 +-
arch/arm/mach-footbridge/cats-hw.c | 2 +-
arch/arm/mach-footbridge/netwinder-hw.c | 2 +-
arch/arm/mach-msm/board-halibut.c | 6 --
arch/arm/mach-msm/board-mahimahi.c | 13 +---
arch/arm/mach-msm/board-msm7x30.c | 3 +-
arch/arm/mach-msm/board-sapphire.c | 13 ++--
arch/arm/mach-msm/board-trout.c | 8 +--
arch/arm/mach-orion5x/common.c | 3 +-
arch/arm/mach-orion5x/common.h | 3 +-
arch/arm/mach-pxa/cm-x300.c | 3 +-
arch/arm/mach-pxa/corgi.c | 10 +--
arch/arm/mach-pxa/eseries.c | 9 +--
arch/arm/mach-pxa/poodle.c | 8 +--
arch/arm/mach-pxa/spitz.c | 8 +--
arch/arm/mach-pxa/tosa.c | 8 +--
arch/arm/mach-realview/core.c | 11 +--
arch/arm/mach-realview/core.h | 3 +-
arch/arm/mach-realview/realview_pb1176.c | 8 +--
arch/arm/mach-realview/realview_pbx.c | 17 ++---
arch/arm/mach-s3c24xx/mach-smdk2413.c | 8 +--
arch/arm/mach-s3c24xx/mach-vstms.c | 8 +--
arch/arm/mach-sa1100/assabet.c | 2 +-
arch/arm/mm/init.c | 67 +++++++-----------
arch/arm/mm/mmu.c | 115 +++++++++---------------------
include/linux/memblock.h | 2 +
mm/memblock.c | 5 ++
35 files changed, 143 insertions(+), 291 deletions(-)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply
* [PATCHv3 2/2] arm: Get rid of meminfo
From: Laura Abbott @ 2014-02-11 21:14 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1392153265-14439-1-git-send-email-lauraa@codeaurora.org>
memblock is now fully integrated into the kernel and is the prefered
method for tracking memory. Rather than reinvent the wheel with
meminfo, migrate to using memblock directly instead of meminfo as
an intermediate.
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
---
arch/arm/include/asm/mach/arch.h | 4 +-
arch/arm/include/asm/memblock.h | 3 +-
arch/arm/include/asm/setup.h | 23 ------
arch/arm/kernel/atags_parse.c | 5 +-
arch/arm/kernel/devtree.c | 5 --
arch/arm/kernel/setup.c | 30 ++------
arch/arm/mach-clps711x/board-clep7312.c | 7 +-
arch/arm/mach-clps711x/board-edb7211.c | 10 +--
arch/arm/mach-clps711x/board-p720t.c | 2 +-
| 2 +-
| 2 +-
arch/arm/mach-msm/board-halibut.c | 6 --
arch/arm/mach-msm/board-mahimahi.c | 13 +---
arch/arm/mach-msm/board-msm7x30.c | 3 +-
arch/arm/mach-msm/board-sapphire.c | 13 ++--
arch/arm/mach-msm/board-trout.c | 8 +--
arch/arm/mach-orion5x/common.c | 3 +-
arch/arm/mach-orion5x/common.h | 3 +-
arch/arm/mach-pxa/cm-x300.c | 3 +-
arch/arm/mach-pxa/corgi.c | 10 +--
arch/arm/mach-pxa/eseries.c | 9 +--
arch/arm/mach-pxa/poodle.c | 8 +--
arch/arm/mach-pxa/spitz.c | 8 +--
arch/arm/mach-pxa/tosa.c | 8 +--
arch/arm/mach-realview/core.c | 11 +--
arch/arm/mach-realview/core.h | 3 +-
arch/arm/mach-realview/realview_pb1176.c | 8 +--
arch/arm/mach-realview/realview_pbx.c | 17 ++---
arch/arm/mach-s3c24xx/mach-smdk2413.c | 8 +--
arch/arm/mach-s3c24xx/mach-vstms.c | 8 +--
arch/arm/mach-sa1100/assabet.c | 2 +-
arch/arm/mm/init.c | 67 +++++++-----------
arch/arm/mm/mmu.c | 115 +++++++++---------------------
33 files changed, 136 insertions(+), 291 deletions(-)
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 17a3fa2..c43473a 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -14,7 +14,6 @@
#include <linux/reboot.h>
struct tag;
-struct meminfo;
struct pt_regs;
struct smp_operations;
#ifdef CONFIG_SMP
@@ -47,8 +46,7 @@ struct machine_desc {
enum reboot_mode reboot_mode; /* default restart mode */
struct smp_operations *smp; /* SMP operations */
bool (*smp_init)(void);
- void (*fixup)(struct tag *, char **,
- struct meminfo *);
+ void (*fixup)(struct tag *, char **);
void (*init_meminfo)(void);
void (*reserve)(void);/* reserve mem blocks */
void (*map_io)(void);/* IO mapping function */
diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h
index c2f5102..bf47a6c 100644
--- a/arch/arm/include/asm/memblock.h
+++ b/arch/arm/include/asm/memblock.h
@@ -1,10 +1,9 @@
#ifndef _ASM_ARM_MEMBLOCK_H
#define _ASM_ARM_MEMBLOCK_H
-struct meminfo;
struct machine_desc;
-void arm_memblock_init(struct meminfo *, const struct machine_desc *);
+void arm_memblock_init(const struct machine_desc *);
phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align);
#endif
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 8d6a089..0196091 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -26,29 +26,6 @@ static const struct tagtable __tagtable_##fn __tag = { tag, fn }
*/
#define NR_BANKS CONFIG_ARM_NR_BANKS
-struct membank {
- phys_addr_t start;
- phys_addr_t size;
- unsigned int highmem;
-};
-
-struct meminfo {
- int nr_banks;
- struct membank bank[NR_BANKS];
-};
-
-extern struct meminfo meminfo;
-
-#define for_each_bank(iter,mi) \
- for (iter = 0; iter < (mi)->nr_banks; iter++)
-
-#define bank_pfn_start(bank) __phys_to_pfn((bank)->start)
-#define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size)
-#define bank_pfn_size(bank) ((bank)->size >> PAGE_SHIFT)
-#define bank_phys_start(bank) (bank)->start
-#define bank_phys_end(bank) ((bank)->start + (bank)->size)
-#define bank_phys_size(bank) (bank)->size
-
extern int arm_add_memory(u64 start, u64 size);
extern void early_print(const char *str, ...);
extern void dump_machine_table(void);
diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c
index 8c14de8..7807ef5 100644
--- a/arch/arm/kernel/atags_parse.c
+++ b/arch/arm/kernel/atags_parse.c
@@ -22,6 +22,7 @@
#include <linux/fs.h>
#include <linux/root_dev.h>
#include <linux/screen_info.h>
+#include <linux/memblock.h>
#include <asm/setup.h>
#include <asm/system_info.h>
@@ -222,10 +223,10 @@ setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
}
if (mdesc->fixup)
- mdesc->fixup(tags, &from, &meminfo);
+ mdesc->fixup(tags, &from);
if (tags->hdr.tag == ATAG_CORE) {
- if (meminfo.nr_banks != 0)
+ if (memblock_phys_mem_size())
squash_mem_tags(tags);
save_atags(tags);
parse_tags(tags);
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index f751714..398cd5f 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -26,11 +26,6 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-void __init early_init_dt_add_memory_arch(u64 base, u64 size)
-{
- arm_add_memory(base, size);
-}
-
void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
{
return memblock_virt_alloc(size, align);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 1e8b030..7dd83d0 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -625,15 +625,8 @@ void __init dump_machine_table(void)
int __init arm_add_memory(u64 start, u64 size)
{
- struct membank *bank = &meminfo.bank[meminfo.nr_banks];
u64 aligned_start;
- if (meminfo.nr_banks >= NR_BANKS) {
- pr_crit("NR_BANKS too low, ignoring memory at 0x%08llx\n",
- (long long)start);
- return -EINVAL;
- }
-
/*
* Ensure that start/size are aligned to a page boundary.
* Size is appropriately rounded down, start is rounded up.
@@ -674,17 +667,17 @@ int __init arm_add_memory(u64 start, u64 size)
aligned_start = PHYS_OFFSET;
}
- bank->start = aligned_start;
- bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1);
+ start = aligned_start;
+ size = size & ~(phys_addr_t)(PAGE_SIZE - 1);
/*
* Check whether this memory region has non-zero size or
* invalid node number.
*/
- if (bank->size == 0)
+ if (size == 0)
return -EINVAL;
- meminfo.nr_banks++;
+ memblock_add(start, size);
return 0;
}
@@ -692,6 +685,7 @@ int __init arm_add_memory(u64 start, u64 size)
* Pick out the memory size. We look for mem=size at start,
* where start and size are "size[KkMm]"
*/
+
static int __init early_mem(char *p)
{
static int usermem __initdata = 0;
@@ -706,7 +700,8 @@ static int __init early_mem(char *p)
*/
if (usermem == 0) {
usermem = 1;
- meminfo.nr_banks = 0;
+ memblock_remove(memblock_start_of_DRAM(),
+ memblock_end_of_DRAM() - memblock_start_of_DRAM());
}
start = PHYS_OFFSET;
@@ -851,13 +846,6 @@ static void __init reserve_crashkernel(void)
static inline void reserve_crashkernel(void) {}
#endif /* CONFIG_KEXEC */
-static int __init meminfo_cmp(const void *_a, const void *_b)
-{
- const struct membank *a = _a, *b = _b;
- long cmp = bank_pfn_start(a) - bank_pfn_start(b);
- return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
-}
-
void __init hyp_mode_check(void)
{
#ifdef CONFIG_ARM_VIRT_EXT
@@ -900,12 +888,10 @@ void __init setup_arch(char **cmdline_p)
parse_early_param();
- sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
-
early_paging_init(mdesc, lookup_processor_type(read_cpuid_id()));
setup_dma_zone(mdesc);
sanity_check_meminfo();
- arm_memblock_init(&meminfo, mdesc);
+ arm_memblock_init(mdesc);
paging_init(mdesc);
request_standard_resources(mdesc);
diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c
index b476424..4d04b91 100644
--- a/arch/arm/mach-clps711x/board-clep7312.c
+++ b/arch/arm/mach-clps711x/board-clep7312.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/types.h>
#include <linux/string.h>
+#include <linux/memblock.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -26,11 +27,9 @@
#include "common.h"
static void __init
-fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi)
+fixup_clep7312(struct tag *tags, char **cmdline)
{
- mi->nr_banks=1;
- mi->bank[0].start = 0xc0000000;
- mi->bank[0].size = 0x01000000;
+ memblock_add(0xc0000000, 0x01000000);
}
MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index fe6184e..b617aa2 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -16,6 +16,7 @@
#include <linux/interrupt.h>
#include <linux/backlight.h>
#include <linux/platform_device.h>
+#include <linux/memblock.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
@@ -133,7 +134,7 @@ static void __init edb7211_reserve(void)
}
static void __init
-fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
+fixup_edb7211(struct tag *tags, char **cmdline)
{
/*
* Bank start addresses are not present in the information
@@ -143,11 +144,8 @@ fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
* Banks sizes _are_ present in the param block, but we're
* not using that information yet.
*/
- mi->bank[0].start = 0xc0000000;
- mi->bank[0].size = SZ_8M;
- mi->bank[1].start = 0xc1000000;
- mi->bank[1].size = SZ_8M;
- mi->nr_banks = 2;
+ memblock_add(0xc0000000, SZ_8M);
+ memblock_add(0xc1000000, SZ_8M);
}
static void __init edb7211_init(void)
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index dd81b06..c1c6729 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -295,7 +295,7 @@ static struct generic_bl_info p720t_lcd_backlight_pdata = {
};
static void __init
-fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi)
+fixup_p720t(struct tag *tag, char **cmdline)
{
/*
* Our bootloader doesn't setup any tags (yet).
--git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 9669cc0..de86ab6 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -76,7 +76,7 @@ __initcall(cats_hw_init);
* hard reboots fail on early boards.
*/
static void __init
-fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi)
+fixup_cats(struct tag *tags, char **cmdline)
{
screen_info.orig_video_lines = 25;
screen_info.orig_video_points = 16;
--git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index eb1fa5c..cdee08c 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -620,7 +620,7 @@ __initcall(nw_hw_init);
* the parameter page.
*/
static void __init
-fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi)
+fixup_netwinder(struct tag *tags, char **cmdline)
{
#ifdef CONFIG_ISAPNP
extern int isapnp_disable;
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index a775298..61bfe58 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -83,11 +83,6 @@ static void __init halibut_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
}
-static void __init halibut_fixup(struct tag *tags, char **cmdline,
- struct meminfo *mi)
-{
-}
-
static void __init halibut_map_io(void)
{
msm_map_common_io();
@@ -100,7 +95,6 @@ static void __init halibut_init_late(void)
MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
.atag_offset = 0x100,
- .fixup = halibut_fixup,
.map_io = halibut_map_io,
.init_early = halibut_init_early,
.init_irq = halibut_init_irq,
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index 7d9981c..873c3ca 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/memblock.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -52,16 +53,10 @@ static void __init mahimahi_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
}
-static void __init mahimahi_fixup(struct tag *tags, char **cmdline,
- struct meminfo *mi)
+static void __init mahimahi_fixup(struct tag *tags, char **cmdline)
{
- mi->nr_banks = 2;
- mi->bank[0].start = PHYS_OFFSET;
- mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
- mi->bank[0].size = (219*1024*1024);
- mi->bank[1].start = MSM_HIGHMEM_BASE;
- mi->bank[1].node = PHYS_TO_NID(MSM_HIGHMEM_BASE);
- mi->bank[1].size = MSM_HIGHMEM_SIZE;
+ memblock_add(PHYS_OFFSET, 219*SZ_1M);
+ memblock_add(MSM_HIGHMEM_BASE, MSM_HIGHMEM_SIZE);
}
static void __init mahimahi_map_io(void)
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 46de789..b621b23 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -40,8 +40,7 @@
#include "proc_comm.h"
#include "common.h"
-static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
- struct meminfo *mi)
+static void __init msm7x30_fixup(struct tag *tag, char **cmdline)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 3276051..e509679 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -35,6 +35,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/memblock.h>
#include "gpio_chip.h"
#include "board-sapphire.h"
@@ -74,22 +75,18 @@ static struct map_desc sapphire_io_desc[] __initdata = {
}
};
-static void __init sapphire_fixup(struct tag *tags, char **cmdline,
- struct meminfo *mi)
+static void __init sapphire_fixup(struct tag *tags, char **cmdline)
{
int smi_sz = parse_tag_smi((const struct tag *)tags);
- mi->nr_banks = 1;
- mi->bank[0].start = PHYS_OFFSET;
- mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
if (smi_sz == 32) {
- mi->bank[0].size = (84*1024*1024);
+ memblock_add(PHYS_OFFSET, 84*SZ_1M);
} else if (smi_sz == 64) {
- mi->bank[0].size = (101*1024*1024);
+ memblock_add(PHYS_OFFSET, 101*SZ_1M);
} else {
+ memblock_add(PHYS_OFFSET, 101*SZ_1M);
/* Give a default value when not get smi size */
smi_sz = 64;
- mi->bank[0].size = (101*1024*1024);
}
}
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 015d544..58826cf 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/clkdev.h>
+#include <linux/memblock.h>
#include <asm/system_info.h>
#include <asm/mach-types.h>
@@ -55,12 +56,9 @@ static void __init trout_init_irq(void)
msm_init_irq();
}
-static void __init trout_fixup(struct tag *tags, char **cmdline,
- struct meminfo *mi)
+static void __init trout_fixup(struct tag *tags, char **cmdline)
{
- mi->nr_banks = 1;
- mi->bank[0].start = PHYS_OFFSET;
- mi->bank[0].size = (101*1024*1024);
+ memblock_add(PHYS_OFFSET, 101*SZ_1M);
}
static void __init trout_init(void)
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 3f1de11..6bbb7b5 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -365,8 +365,7 @@ void orion5x_restart(enum reboot_mode mode, const char *cmd)
* Many orion-based systems have buggy bootloader implementations.
* This is a common fixup for bogus memory tags.
*/
-void __init tag_fixup_mem32(struct tag *t, char **from,
- struct meminfo *meminfo)
+void __init tag_fixup_mem32(struct tag *t, char **from)
{
for (; t->hdr.size; t = tag_next(t))
if (t->hdr.tag == ATAG_MEM &&
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index f565f99..175ec4c 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -71,9 +71,8 @@ void edmini_v2_init(void);
static inline void edmini_v2_init(void) {};
#endif
-struct meminfo;
struct tag;
-extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *);
+extern void __init tag_fixup_mem32(struct tag *, char **);
/*****************************************************************************
* Helpers to access Orion registers
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 584439bf..4d3588d 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -837,8 +837,7 @@ static void __init cm_x300_init(void)
cm_x300_init_bl();
}
-static void __init cm_x300_fixup(struct tag *tags, char **cmdline,
- struct meminfo *mi)
+static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
{
/* Make sure that mi->bank[0].start = PHYS_ADDR */
for (; tags->hdr.size; tags = tag_next(tags))
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index f162f1b..a763744 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -33,6 +33,7 @@
#include <linux/mtd/sharpsl.h>
#include <linux/input/matrix_keypad.h>
#include <linux/module.h>
+#include <linux/memblock.h>
#include <video/w100fb.h>
#include <asm/setup.h>
@@ -713,16 +714,13 @@ static void __init corgi_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
}
-static void __init fixup_corgi(struct tag *tags, char **cmdline,
- struct meminfo *mi)
+static void __init fixup_corgi(struct tag *tags, char **cmdline)
{
sharpsl_save_param();
- mi->nr_banks=1;
- mi->bank[0].start = 0xa0000000;
if (machine_is_corgi())
- mi->bank[0].size = (32*1024*1024);
+ memblock_add(0xa0000000, SZ_32M);
else
- mi->bank[0].size = (64*1024*1024);
+ memblock_add(0xa0000000, SZ_64M);
}
#ifdef CONFIG_MACH_CORGI
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 8280ebca..cfb8641 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -21,6 +21,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/usb/gpio_vbus.h>
+#include <linux/memblock.h>
#include <video/w100fb.h>
@@ -41,14 +42,12 @@
#include "clock.h"
/* Only e800 has 128MB RAM */
-void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
+void __init eseries_fixup(struct tag *tags, char **cmdline)
{
- mi->nr_banks=1;
- mi->bank[0].start = 0xa0000000;
if (machine_is_e800())
- mi->bank[0].size = (128*1024*1024);
+ memblock_add(0xa0000000, SZ_128M);
else
- mi->bank[0].size = (64*1024*1024);
+ memblock_add(0xa0000000, SZ_64M);
}
struct gpio_vbus_mach_info e7xx_udc_info = {
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index aedf053..1319916 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -29,6 +29,7 @@
#include <linux/spi/ads7846.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/mtd/sharpsl.h>
+#include <linux/memblock.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -456,13 +457,10 @@ static void __init poodle_init(void)
poodle_init_spi();
}
-static void __init fixup_poodle(struct tag *tags, char **cmdline,
- struct meminfo *mi)
+static void __init fixup_poodle(struct tag *tags, char **cmdline)
{
sharpsl_save_param();
- mi->nr_banks=1;
- mi->bank[0].start = 0xa0000000;
- mi->bank[0].size = (32*1024*1024);
+ memblock_add(0xa0000000, SZ_32M);
}
MACHINE_START(POODLE, "SHARP Poodle")
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 0b11c1a..840c3a4 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -32,6 +32,7 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/reboot.h>
+#include <linux/memblock.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -971,13 +972,10 @@ static void __init spitz_init(void)
spitz_i2c_init();
}
-static void __init spitz_fixup(struct tag *tags, char **cmdline,
- struct meminfo *mi)
+static void __init spitz_fixup(struct tag *tags, char **cmdline)
{
sharpsl_save_param();
- mi->nr_banks = 1;
- mi->bank[0].start = 0xa0000000;
- mi->bank[0].size = (64*1024*1024);
+ memblock_add(0xa0000000, SZ_64M);
}
#ifdef CONFIG_MACH_SPITZ
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index ef5557b..c158a6e 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -37,6 +37,7 @@
#include <linux/i2c/pxa-i2c.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/reboot.h>
+#include <linux/memblock.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -960,13 +961,10 @@ static void __init tosa_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
}
-static void __init fixup_tosa(struct tag *tags, char **cmdline,
- struct meminfo *mi)
+static void __init fixup_tosa(struct tag *tags, char **cmdline)
{
sharpsl_save_param();
- mi->nr_banks=1;
- mi->bank[0].start = 0xa0000000;
- mi->bank[0].size = (64*1024*1024);
+ memblock_add(0xa0000000, SZ_64M);
}
MACHINE_START(TOSA, "SHARP Tosa")
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 1d5ee5c..c2fae3a 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -31,6 +31,7 @@
#include <linux/amba/mmci.h>
#include <linux/gfp.h>
#include <linux/mtd/physmap.h>
+#include <linux/memblock.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -370,19 +371,15 @@ void __init realview_timer_init(unsigned int timer_irq)
/*
* Setup the memory banks.
*/
-void realview_fixup(struct tag *tags, char **from, struct meminfo *meminfo)
+void realview_fixup(struct tag *tags, char **from)
{
/*
* Most RealView platforms have 512MB contiguous RAM at 0x70000000.
* Half of this is mirrored at 0.
*/
#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
- meminfo->bank[0].start = 0x70000000;
- meminfo->bank[0].size = SZ_512M;
- meminfo->nr_banks = 1;
+ memblock_add(0x70000000, SZ_512M);
#else
- meminfo->bank[0].start = 0;
- meminfo->bank[0].size = SZ_256M;
- meminfo->nr_banks = 1;
+ memblock_add(0, SZ_256M);
#endif
}
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 602ca5e..844946d 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -51,8 +51,7 @@ extern int realview_flash_register(struct resource *res, u32 num);
extern int realview_eth_register(const char *name, struct resource *res);
extern int realview_usb_register(struct resource *res);
extern void realview_init_early(void);
-extern void realview_fixup(struct tag *tags, char **from,
- struct meminfo *meminfo);
+extern void realview_fixup(struct tag *tags, char **from);
extern struct smp_operations realview_smp_ops;
extern void realview_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index c5eade7..6abf6a0 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -32,6 +32,7 @@
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/clk-realview.h>
#include <linux/reboot.h>
+#include <linux/memblock.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@@ -339,15 +340,12 @@ static void realview_pb1176_restart(enum reboot_mode mode, const char *cmd)
dsb();
}
-static void realview_pb1176_fixup(struct tag *tags, char **from,
- struct meminfo *meminfo)
+static void realview_pb1176_fixup(struct tag *tags, char **from)
{
/*
* RealView PB1176 only has 128MB of RAM mapped at 0.
*/
- meminfo->bank[0].start = 0;
- meminfo->bank[0].size = SZ_128M;
- meminfo->nr_banks = 1;
+ memblock_add(0, SZ_128M);
}
static void __init realview_pb1176_init(void)
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 9d75493..60d322a 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -29,6 +29,7 @@
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/clk-realview.h>
#include <linux/reboot.h>
+#include <linux/memblock.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -325,23 +326,19 @@ static void __init realview_pbx_timer_init(void)
realview_pbx_twd_init();
}
-static void realview_pbx_fixup(struct tag *tags, char **from,
- struct meminfo *meminfo)
+static void realview_pbx_fixup(struct tag *tags, char **from)
{
#ifdef CONFIG_SPARSEMEM
/*
* Memory configuration with SPARSEMEM enabled on RealView PBX (see
* asm/mach/memory.h for more information).
*/
- meminfo->bank[0].start = 0;
- meminfo->bank[0].size = SZ_256M;
- meminfo->bank[1].start = 0x20000000;
- meminfo->bank[1].size = SZ_512M;
- meminfo->bank[2].start = 0x80000000;
- meminfo->bank[2].size = SZ_256M;
- meminfo->nr_banks = 3;
+
+ memblock_add(0, SZ_256M);
+ memblock_add(0x20000000, SZ_512M);
+ memblock_add(0x80000000, SZ_256M);
#else
- realview_fixup(tags, from, meminfo);
+ realview_fixup(tags, from);
#endif
}
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index f5bc721..0551758 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -21,6 +21,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/memblock.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -93,13 +94,10 @@ static struct platform_device *smdk2413_devices[] __initdata = {
&s3c2412_device_dma,
};
-static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
- struct meminfo *mi)
+static void __init smdk2413_fixup(struct tag *tags, char **cmdline)
{
if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
- mi->nr_banks=1;
- mi->bank[0].start = 0x30000000;
- mi->bank[0].size = SZ_64M;
+ memblock_add(0x30000000, SZ_64M);
}
}
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index f7ec9c5..aa550f5 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -22,6 +22,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
+#include <linux/memblock.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -129,13 +130,10 @@ static struct platform_device *vstms_devices[] __initdata = {
&s3c2412_device_dma,
};
-static void __init vstms_fixup(struct tag *tags, char **cmdline,
- struct meminfo *mi)
+static void __init vstms_fixup(struct tag *tags, char **cmdline)
{
if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
- mi->nr_banks=1;
- mi->bank[0].start = 0x30000000;
- mi->bank[0].size = SZ_64M;
+ memblock_add(0x30000000, SZ_64M);
}
}
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 8443a27..7dd894e 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -531,7 +531,7 @@ static void __init get_assabet_scr(void)
}
static void __init
-fixup_assabet(struct tag *tags, char **cmdline, struct meminfo *mi)
+fixup_assabet(struct tag *tags, char **cmdline)
{
/* This must be done before any call to machine_has_neponset() */
map_sa1100_gpio_regs();
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 42fc139..a62dadd 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -81,24 +81,21 @@ __tagtable(ATAG_INITRD2, parse_tag_initrd2);
* initialization functions, as well as show_mem() for the skipping
* of holes in the memory map. It is populated by arm_add_memory().
*/
-struct meminfo meminfo;
-
void show_mem(unsigned int filter)
{
int free = 0, total = 0, reserved = 0;
- int shared = 0, cached = 0, slab = 0, i;
- struct meminfo * mi = &meminfo;
+ int shared = 0, cached = 0, slab = 0;
+ struct memblock_region *reg;
printk("Mem-info:\n");
show_free_areas(filter);
- for_each_bank (i, mi) {
- struct membank *bank = &mi->bank[i];
+ for_each_memblock (memory, reg) {
unsigned int pfn1, pfn2;
struct page *page, *end;
- pfn1 = bank_pfn_start(bank);
- pfn2 = bank_pfn_end(bank);
+ pfn1 = memblock_region_memory_base_pfn(reg);
+ pfn2 = memblock_region_memory_end_pfn(reg);
page = pfn_to_page(pfn1);
end = pfn_to_page(pfn2 - 1) + 1;
@@ -130,16 +127,9 @@ void show_mem(unsigned int filter)
static void __init find_limits(unsigned long *min, unsigned long *max_low,
unsigned long *max_high)
{
- struct meminfo *mi = &meminfo;
- int i;
-
- /* This assumes the meminfo array is properly sorted */
- *min = bank_pfn_start(&mi->bank[0]);
- for_each_bank (i, mi)
- if (mi->bank[i].highmem)
- break;
- *max_low = bank_pfn_end(&mi->bank[i - 1]);
- *max_high = bank_pfn_end(&mi->bank[mi->nr_banks - 1]);
+ *max_low = PFN_DOWN(memblock_get_current_limit());
+ *min = PFN_UP(memblock_start_of_DRAM());
+ *max_high = PFN_DOWN(memblock_end_of_DRAM());
}
#ifdef CONFIG_ZONE_DMA
@@ -275,14 +265,8 @@ phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align)
return phys;
}
-void __init arm_memblock_init(struct meminfo *mi,
- const struct machine_desc *mdesc)
+void __init arm_memblock_init(const struct machine_desc *mdesc)
{
- int i;
-
- for (i = 0; i < mi->nr_banks; i++)
- memblock_add(mi->bank[i].start, mi->bank[i].size);
-
/* Register the kernel text, kernel data and initrd with memblock. */
#ifdef CONFIG_XIP_KERNEL
memblock_reserve(__pa(_sdata), _end - _sdata);
@@ -413,54 +397,53 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn)
/*
* The mem_map array can get very big. Free the unused area of the memory map.
*/
-static void __init free_unused_memmap(struct meminfo *mi)
+static void __init free_unused_memmap(void)
{
- unsigned long bank_start, prev_bank_end = 0;
- unsigned int i;
+ unsigned long start, prev_end = 0;
+ struct memblock_region *reg;
/*
* This relies on each bank being in address order.
* The banks are sorted previously in bootmem_init().
*/
- for_each_bank(i, mi) {
- struct membank *bank = &mi->bank[i];
-
- bank_start = bank_pfn_start(bank);
+ for_each_memblock(memory, reg) {
+ start = __phys_to_pfn(reg->base);
#ifdef CONFIG_SPARSEMEM
/*
* Take care not to free memmap entries that don't exist
* due to SPARSEMEM sections which aren't present.
*/
- bank_start = min(bank_start,
- ALIGN(prev_bank_end, PAGES_PER_SECTION));
+ start = min(start,
+ ALIGN(prev_end, PAGES_PER_SECTION));
#else
/*
* Align down here since the VM subsystem insists that the
* memmap entries are valid from the bank start aligned to
* MAX_ORDER_NR_PAGES.
*/
- bank_start = round_down(bank_start, MAX_ORDER_NR_PAGES);
+ start = round_down(start, MAX_ORDER_NR_PAGES);
#endif
/*
* If we had a previous bank, and there is a space
* between the current bank and the previous, free it.
*/
- if (prev_bank_end && prev_bank_end < bank_start)
- free_memmap(prev_bank_end, bank_start);
+ if (prev_end && prev_end < start)
+ free_memmap(prev_end, start);
/*
* Align up here since the VM subsystem insists that the
* memmap entries are valid from the bank end aligned to
* MAX_ORDER_NR_PAGES.
*/
- prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
+ prev_end = ALIGN(start + __phys_to_pfn(reg->size),
+ MAX_ORDER_NR_PAGES);
}
#ifdef CONFIG_SPARSEMEM
- if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION))
- free_memmap(prev_bank_end,
- ALIGN(prev_bank_end, PAGES_PER_SECTION));
+ if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION))
+ free_memmap(prev_end,
+ ALIGN(prev_end, PAGES_PER_SECTION));
#endif
}
@@ -536,7 +519,7 @@ void __init mem_init(void)
set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
/* this will put all unused low memory onto the freelists */
- free_unused_memmap(&meminfo);
+ free_unused_memmap();
free_all_bootmem();
#ifdef CONFIG_SA1111
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4f08c13..23433ef 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1046,74 +1046,44 @@ phys_addr_t arm_lowmem_limit __initdata = 0;
void __init sanity_check_meminfo(void)
{
phys_addr_t memblock_limit = 0;
- int i, j, highmem = 0;
+ int highmem = 0;
phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1;
+ struct memblock_region *reg;
- for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
- struct membank *bank = &meminfo.bank[j];
- phys_addr_t size_limit;
-
- *bank = meminfo.bank[i];
- size_limit = bank->size;
+ for_each_memblock(memory, reg) {
+ phys_addr_t block_start = reg->base;
+ phys_addr_t block_end = reg->base + reg->size;
+ phys_addr_t size_limit = reg->size;
- if (bank->start >= vmalloc_limit)
+ if (reg->base >= vmalloc_limit)
highmem = 1;
else
- size_limit = vmalloc_limit - bank->start;
+ size_limit = vmalloc_limit - reg->base;
- bank->highmem = highmem;
-#ifdef CONFIG_HIGHMEM
- /*
- * Split those memory banks which are partially overlapping
- * the vmalloc area greatly simplifying things later.
- */
- if (!highmem && bank->size > size_limit) {
- if (meminfo.nr_banks >= NR_BANKS) {
- printk(KERN_CRIT "NR_BANKS too low, "
- "ignoring high memory\n");
- } else {
- memmove(bank + 1, bank,
- (meminfo.nr_banks - i) * sizeof(*bank));
- meminfo.nr_banks++;
- i++;
- bank[1].size -= size_limit;
- bank[1].start = vmalloc_limit;
- bank[1].highmem = highmem = 1;
- j++;
+ if (!IS_ENABLED(CONFIG_HIGHMEM) || cache_is_vipt_aliasing()) {
+
+ if (highmem) {
+ pr_notice("Ignoring ram at %pa-%pa (!CONFIG_HIGHMEM)\n",
+ &block_start, &block_end);
+ memblock_remove(block_start, block_end);
+ continue;
}
- bank->size = size_limit;
- }
-#else
- /*
- * Highmem banks not allowed with !CONFIG_HIGHMEM.
- */
- if (highmem) {
- printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
- "(!CONFIG_HIGHMEM).\n",
- (unsigned long long)bank->start,
- (unsigned long long)bank->start + bank->size - 1);
- continue;
- }
- /*
- * Check whether this memory bank would partially overlap
- * the vmalloc area.
- */
- if (bank->size > size_limit) {
- printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
- "to -%.8llx (vmalloc region overlap).\n",
- (unsigned long long)bank->start,
- (unsigned long long)bank->start + bank->size - 1,
- (unsigned long long)bank->start + size_limit - 1);
- bank->size = size_limit;
+ if (reg->size > size_limit) {
+ phys_addr_t overlap_size = reg->size - size_limit;
+
+ pr_notice("Truncating RAM at %pa-%pa to -%pa",
+ &block_start, &block_end, &overlap_size);
+ memblock_remove(vmalloc_limit, overlap_size);
+ block_end = vmalloc_limit;
+ }
}
-#endif
- if (!bank->highmem) {
- phys_addr_t bank_end = bank->start + bank->size;
- if (bank_end > arm_lowmem_limit)
- arm_lowmem_limit = bank_end;
+ if (!highmem) {
+ if (block_end > arm_lowmem_limit)
+ arm_lowmem_limit = reg->base + size_limit;
+
/*
* Find the first non-section-aligned page, and point
@@ -1129,35 +1099,16 @@ void __init sanity_check_meminfo(void)
* occurs before any free memory is mapped.
*/
if (!memblock_limit) {
- if (!IS_ALIGNED(bank->start, SECTION_SIZE))
- memblock_limit = bank->start;
- else if (!IS_ALIGNED(bank_end, SECTION_SIZE))
- memblock_limit = bank_end;
+ if (!IS_ALIGNED(block_start, SECTION_SIZE))
+ memblock_limit = block_start;
+ else if (!IS_ALIGNED(block_end, SECTION_SIZE))
+ memblock_limit = block_end;
}
- }
- j++;
- }
-#ifdef CONFIG_HIGHMEM
- if (highmem) {
- const char *reason = NULL;
- if (cache_is_vipt_aliasing()) {
- /*
- * Interactions between kmap and other mappings
- * make highmem support with aliasing VIPT caches
- * rather difficult.
- */
- reason = "with VIPT aliasing cache";
- }
- if (reason) {
- printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
- reason);
- while (j > 0 && meminfo.bank[j - 1].highmem)
- j--;
}
+
}
-#endif
- meminfo.nr_banks = j;
+
high_memory = __va(arm_lowmem_limit - 1) + 1;
/*
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply related
* [PATCH] ARM: tegra: don't timeout if CPU is powergated
From: Thierry Reding @ 2014-02-11 21:18 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1d5ea6b7df4573d866779857922ac650fe59af60.1392078805.git.stefan@agner.ch>
On Tue, Feb 11, 2014 at 01:44:13AM +0100, Stefan Agner wrote:
> When booting secondary CPU(s) which are not yet powergated, a wrong
> check lead to a timeout after 100 jiffies. With this patch, we only
> delay powergating if CPUs are still not powered yet.
>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> I happend to come accross this while working on Colibri T30 support.
> Obviously, the downstream U-Boot doesn't powergate all CPUs, so
> the Linux kernel always timed out when booting CPU 1 through 3...
>
> arch/arm/mach-tegra/platsmp.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
> index eb72ae7..929d104 100644
> --- a/arch/arm/mach-tegra/platsmp.c
> +++ b/arch/arm/mach-tegra/platsmp.c
> @@ -114,7 +114,7 @@ static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle)
>
> /* Wait for the power to come up. */
> timeout = jiffies + msecs_to_jiffies(100);
> - while (tegra_pmc_cpu_is_powered(cpu)) {
> + while (!tegra_pmc_cpu_is_powered(cpu)) {
> if (time_after(jiffies, timeout))
> return -ETIMEDOUT;
> udelay(10);
This is indeed what I'd expect the code to look like. Since the code
enables power to the CPU, the logical thing to do would be to then wait
for it to be powered up.
I don't quite understand when exactly this will fail, since the whole
block above is conditional on !tegra_pmc_cpu_is_powered() condition, so
the only way that this can happen is when the first check fails, then
the CPU is powered on and the PMC recognizes the CPU as powered before
the while (...) is executed.
Thinking about it I've seen an issue on Cardhu where occasionally only
three of the four CPUs actually came up (I've only noticed this since
the DRM panel patches because three penguins looks kind of weird =).
This bug would explain that issue.
Any way, the new code makes much more sense than the old one, so:
Reviewed-by: Thierry Reding <treding@nvidia.com>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140211/d690f873/attachment.sig>
^ permalink raw reply
* [GIT PULL] qcom SoC changes for v3.15
From: Kumar Gala @ 2014-02-11 21:19 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit cf1e8f0cd665e2a9966d2bee4e11ecc0938ff166:
ARM: qcom: Rename various msm prefixed functions to qcom (2014-02-06 16:20:41 -0600)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git tags/qcom-soc-for-3.15
for you to fetch changes up to 6990c132abc984bd6e75ac2be1f1d657cd600f63:
ARM: qcom: Add SMP support for KPSSv2 (2014-02-11 15:00:40 -0600)
----------------------------------------------------------------
Qualcomm ARM Based SoC Updates for v3.15
* Add support for determining smp ops based on device tree.
* Add DT binding specs for Krait/Scorpion enable method
* Add DT binding specs for various Krait Processor controller complexes
* Add SoC SMP support for Krait Processor Subsystem v1 & v2
----------------------------------------------------------------
Rohit Vaswani (4):
ARM: qcom: Re-organize platsmp to make it extensible
devicetree: bindings: Document Krait/Scorpion cpus and enable-method
ARM: qcom: Add SMP support for KPSSv1
ARM: qcom: Add SMP support for KPSSv2
Stephen Boyd (3):
ARM: Introduce CPU_METHOD_OF_DECLARE() for cpu hotplug/smp
devicetree: bindings: Document qcom,kpss-acc
devicetree: bindings: Document qcom,saw2 node
Documentation/devicetree/bindings/arm/cpus.txt | 25 +-
.../devicetree/bindings/arm/msm/qcom,kpss-acc.txt | 30 ++
.../devicetree/bindings/arm/msm/qcom,saw2.txt | 35 +++
arch/arm/include/asm/smp.h | 9 +
arch/arm/kernel/devtree.c | 40 +++
arch/arm/mach-msm/common.h | 2 -
arch/arm/mach-qcom/board.c | 14 -
arch/arm/mach-qcom/platsmp.c | 341 ++++++++++++++++++---
arch/arm/mach-qcom/scm-boot.h | 8 +-
include/asm-generic/vmlinux.lds.h | 10 +
10 files changed, 444 insertions(+), 70 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply
* [PATCH] ARM: tegra: dalmore: fix irq trigger type
From: Stefan Agner @ 2014-02-11 21:21 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20140211204737.GA1895@mithrandir>
Am 2014-02-11 21:47, schrieb Thierry Reding:
> On Tue, Feb 11, 2014 at 09:11:32PM +0100, Stefan Agner wrote:
>> Trigger type needs to be IRQ_TYPE_LEVEL_HIGH since the interrupt
>> signal gets inverted by the PMC (configured by the invert-interrupt
>> property).
>
> Isn't the reason the other way around? The PMIC generates a low-level
> interrupt, but the GIC can only be configured to accept high-level (or
> rising edge) and therefore the nvidia,invert-interrupt property needs to
> be set in the PMC node?
Hm yes agreed. I should also write the whole story here, maybe this:
The GIC only support high-active interrupts. When using a PMIC with
low-active interrupt, the PMC has to be configured by using the
nvidia,invert-interrupt property in its node.
This fix sets the GIC back to high-active and reverts commit
eca8f98e404934027f84f72882c5e92ffbd9e5f5.
> One nitpick below.
>
>> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
> [...]
>> @@ -888,8 +888,9 @@
>> palmas: tps65913 at 58 {
>> compatible = "ti,palmas";
>> reg = <0x58>;
>> - interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
>>
>> + /* active-low configured by PMC invert-interrupt */
>> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
>
> I'd prefer to keep the properties grouped as before. interrupts is a
> "client" property, whereas #interrupt-cells and interrupt-controller
> are "provider" properties.
>
> And I think the comment would be more appropriate in the pmc node, for
> the same reason that I think the commit description isn't entirely
> accurate.
Well, its kind a question where you are coming from. I read the data
sheet/schemata, and saw that its low-active. Then I went to the PMIC
node and checked how that interrupt is configured, and what you see is
HIGH_ACTIVE. You then think you've found the bug and fix it by setting
it to IRQ_TYPE_LEVEL_LOW. What you don't know is that PMC is in between
and alters the polarity...
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox