* [PATCH] ARM: Kconfig: select GENERIC_CLOCKEVENTS_BROADCAST also on UP
From: Lucas Stach @ 2016-09-16 11:08 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <alpine.DEB.2.20.1609161223311.5384@nanos>
Am Freitag, den 16.09.2016, 12:30 +0200 schrieb Thomas Gleixner:
> On Fri, 16 Sep 2016, Russell King - ARM Linux wrote:
> > On Fri, Sep 16, 2016 at 11:32:20AM +0200, Lucas Stach wrote:
> > > Hi Russell,
> > >
> > > can you please take a look at this and tell if there is something wrong
> > > about it, or if you think it can go in?
> > >
> > > Without this patch the kernel is unable to use the deeper CPU idle
> > > states on i.MX6S if it isn't built with SMP support enabled.
> >
> > Without spending a lot of time digging into this code, working out what
> > these configuration symbols do, I frankly don't know if it's a sensible
> > thing to do or not. I guess tglx knows this code like the back of his
> > hand, and would be in a better position to comment.
> >
> > There's two factors there:
> > 1. the amount of undocumented code in the kernel needing the code to be
> > read and understood to understand various aspects of it from the
> > architecture point of view.
>
> Yeah. I know that this stuff lacks documentation.
>
> > 2. your architecture maintainer has done very little actual platform
> > development (not through his own choice) for the last 10 or so years,
> > which means he's not had to dig into these areas.
> >
> > So, I'm afraid I feel less than qualified on this at the moment. I'll
> > try to look into this and talk to tglx to work out whether it's a
> > sensible change.
>
> The broadcast feature has the following functionality:
>
> It lets you use fast accessible (cpu local) timers for normal operation
> and in case of deep idle sleeps where the cpu local timer stops switch
> to broadcast operation, which arms a slower to access (global) timer
> device which does not stop in deep idle.
>
> On UP we usually just use the global device, but on SMP we need the cpu
> local timers for normal (non idle) operation. Though there is no reason
> to restrict this UP from a technical POV especially when the local
> timer is way cheaper to access than the other device.
>
> Hope that helps.
What I take from this is that the i.MX6 decision to use the local timer
for normal operation on UP is sane, as it's both cheaper to access, as
well as providing higher accuracy.
In fact this behavior has been explicitly enabled by a patch "ARM: imx:
always use TWD on IMX6Q" from Sebastian Andrzej Siewior to get better
responsiveness in cyclictest.
So the subject patch is actually a regression fix, as we now need the
timer broadcast infrastructure to be able to use the deeper idle states,
instead of having them enabled by always using the global timer on UP.
Russell, okay to put it in the patch system?
Regards,
Lucas
^ permalink raw reply
* [PATCH v12 0/4] generic TEE subsystem
From: Jens Wiklander @ 2016-09-16 11:09 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
This patch set introduces a generic TEE subsystem. The TEE subsystem will
contain drivers for various TEE implementations. A TEE (Trusted Execution
Environment) is a trusted OS running in some secure environment, for
example, TrustZone on ARM CPUs, or a separate secure co-processor etc.
Regarding use cases, TrustZone has traditionally been used for
offloading secure tasks to the secure world. Examples include:
- Secure key handling where the OS may or may not have direct access to key
material.
- E-commerce and payment technologies. Credentials, credit card numbers etc
could be stored in a more secure environment.
- Trusted User Interface (TUI) to ensure that no-one can snoop PIN-codes
etc.
- Secure boot to ensure that loaded binaries haven?t been tampered with.
It?s not strictly needed for secure boot, but you could enhance security
by leveraging a TEE during boot.
- Digital Rights Management (DRM), the studios provides content with
different resolution depending on the security of the device. Higher
security means higher resolution.
A TEE could also be used in existing and new technologies. For example IMA
(Integrity Measurement Architecture) which has been in the kernel for quite
a while. Today you can enhance security by using a TPM-chip to sign the IMA
measurement list. This is something that you also could do by leveraging a
TEE.
Another example could be in 2-factor authentication which is becoming
increasingly more important. FIDO (https://fidoalliance.org) for example
are using public key cryptography in their 2-factor authentication standard
(U2F). With FIDO, a private and public key pair will be generated for every
site you visit and the private key should never leave the local device.
This is an example where you could use secure storage in a TEE for the
private key.
Today you will find a quite a few different out of tree implementations of
TEE drivers which tends to fragment the TEE ecosystem and development. We
think it would be a good idea to have a generic TEE driver integrated in
the kernel which would serve as a base for several different TEE solutions,
no matter if they are on-chip like TrustZone or if they are on a separate
crypto co-processor.
To develop this TEE subsystem we have been using the open source TEE called
OP-TEE (https://github.com/OP-TEE/optee_os) and therefore this would be the
first TEE solution supported by this new subsystem. OP-TEE is a
GlobalPlatform compliant TEE, however this TEE subsystem is not limited to
only GlobalPlatform TEEs, instead we have tried to design it so that it
should work with other TEE solutions also.
"tee: generic TEE subsystem" brings in the generic TEE subsystem which
helps when writing a driver for a specific TEE, for example, OP-TEE.
"tee: add OP-TEE driver" is an OP-TEE driver which uses the subsystem to do
its work.
This patch set has been prepared in cooperation with Javier Gonz?lez who
proposed "Generic TrustZone Driver in Linux Kernel" patches 28 Nov 2014,
https://lwn.net/Articles/623380/ . We've since then changed the scope to
TEE instead of TrustZone.
We have discussed the design on tee-dev at lists.linaro.org (archive at
https://lists.linaro.org/pipermail/tee-dev/) with people from other
companies, including Valentin Manea <valentin.manea@huawei.com>,
Emmanuel MICHEL <emmanuel.michel@st.com>,
Jean-michel DELORME <jean-michel.delorme@st.com>,
and Joakim Bech <joakim.bech@linaro.org>. Our main concern has been to
agree on something that is generic enough to support many different
TEEs while still keeping the interface together.
v12:
* Rebased on v4.8-rc5
* Addressed review comments from Andrew F. Davis
* Removed Acked-by: Andreas Dannenberg <dannenberg@ti.com> as the
mail bounces
* Bugfix possible null dereference in error cleanup path of
optee_probe().
* Bugfix optee_from_msg_param() when calculating offset of memref
into a shared memory object
v11:
* Rebased on v4.8-rc3
* Addressed review comments from Nishanth Menon
* Made the TEE framework available as a loadable module.
* Reviewed-by: Javier Gonz?lez <javier@javigon.com>
* Zeroes shared memory on allocation to avoid information leakage
* Links shared memory objects to context to avoid stealing of shared memory
object from an unrelated process
* Allow RPC interruption if supplicant is unavailable
v10:
* Rebased on v4.7-rc1
* Addressed private review comments from Nishanth Menon
* Optee driver only accepts one supplicant process on the privileged device
* Optee driver avoids long delayed releases of shm objects
* Added more comments on functions and structs
v9:
* Rebased on v4.6-rc1
* Acked-by: Andreas Dannenberg <dannenberg@ti.com>
* Addressed comments from Al Viro how file descriptors are passed to
user space
* Addressed comments from Randy Dunlap on documentation
* Changed license for include/uapi/linux/tee.h
v8:
* Rebased on v4.5-rc3
* dt/bindings: add bindings for optee
Acked-by: Rob Herring <robh@kernel.org>
* Fixes build error for X86
* Fixes spell error in "dt/bindings: add bindings for optee"
v7:
* Rebased on v4.5-rc2
* Moved the ARM SMC Calling Convention support into a separate patch
set, which is now merged
v6:
* Rebased on v4.3-rc7
* Changed smccc interface to let the compiler marshal most of the
parameters
* Added ARCH64 capability for smccc interface
* Changed the PSCI firmware calls (both arm and arm64) to use the new
generic smccc interface instead instead of own assembly functions.
* Move optee DT bindings to below arm/firmware
* Defines method for OP-TEE driver to call secure world in DT, smc or hvc
* Exposes implementation id of a TEE driver in sysfs
to easily spawn corresponding tee-supplicant when device is ready
* Update OP-TEE Message Protocol to better cope with fragmented physical
memory
* Read time directly from OP-TEE driver instead of forwarding the RPC
request to tee-supplicant
v5:
* Replaced kref reference counting for the device with a size_t instead as
the counter is always protected by a mutex
v4:
* Rebased on 4.1
* Redesigned the synchronization around entry exit of normal SMC
* Replaced rwsem on the driver instance with kref and completion since
rwsem wasn't intended to be used in this way
* Expanded the TEE_IOCTL_PARAM_ATTR_TYPE_MASK to make room for
future additional parameter types
* Documents TEE subsystem and OP-TEE driver
* Replaced TEE_IOC_CMD with TEE_IOC_OPEN_SESSION, TEE_IOC_INVOKE,
TEE_IOC_CANCEL and TEE_IOC_CLOSE_SESSION
* DT bindings in a separate patch
* Assembly parts moved to arch/arm and arch/arm64 respectively, in a
separate patch
* Redefined/clarified the meaning of OPTEE_SMC_SHM_CACHED
* Removed CMA usage to limit the scope of the patch set
v3:
* Rebased on 4.1-rc3 (dma_buf_export() API change)
* A couple of small sparse fixes
* Documents bindings for OP-TEE driver
* Updated MAINTAINERS
v2:
* Replaced the stubbed OP-TEE driver with a real OP-TEE driver
* Removed most APIs not needed by OP-TEE in current state
* Update Documentation/ioctl/ioctl-number.txt with correct path to tee.h
* Rename tee_shm_pool_alloc_cma() to tee_shm_pool_alloc()
* Moved tee.h into include/uapi/linux/
* Redefined tee.h IOCTL macros to be directly based on _IOR and friends
* Removed version info on the API to user space, a data blob which
can contain an UUID is left for user space to be able to tell which
protocol to use in TEE_IOC_CMD
* Changed user space exposed structures to only have types with __ prefix
* Dropped THIS_MODULE from tee_fops
* Reworked how the driver is registered and ref counted:
- moved from using an embedded struct miscdevice to an embedded struct
device.
- uses an struct rw_semaphore as synchronization for driver detachment
- uses alloc/register pattern from TPM
Thanks,
Jens
Jens Wiklander (4):
dt/bindings: add bindings for optee
tee: generic TEE subsystem
tee: add OP-TEE driver
Documentation: tee subsystem and op-tee driver
Documentation/00-INDEX | 2 +
.../bindings/arm/firmware/linaro,optee-tz.txt | 31 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
Documentation/ioctl/ioctl-number.txt | 1 +
Documentation/tee.txt | 118 +++
MAINTAINERS | 13 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/tee/Kconfig | 18 +
drivers/tee/Makefile | 5 +
drivers/tee/optee/Kconfig | 7 +
drivers/tee/optee/Makefile | 5 +
drivers/tee/optee/call.c | 435 ++++++++++
drivers/tee/optee/core.c | 598 ++++++++++++++
drivers/tee/optee/optee_msg.h | 435 ++++++++++
drivers/tee/optee/optee_private.h | 185 +++++
drivers/tee/optee/optee_smc.h | 446 ++++++++++
drivers/tee/optee/rpc.c | 404 +++++++++
drivers/tee/optee/supp.c | 273 +++++++
drivers/tee/tee_core.c | 901 +++++++++++++++++++++
drivers/tee/tee_private.h | 129 +++
drivers/tee/tee_shm.c | 357 ++++++++
drivers/tee/tee_shm_pool.c | 158 ++++
include/linux/tee_drv.h | 278 +++++++
include/uapi/linux/tee.h | 403 +++++++++
25 files changed, 5206 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt
create mode 100644 Documentation/tee.txt
create mode 100644 drivers/tee/Kconfig
create mode 100644 drivers/tee/Makefile
create mode 100644 drivers/tee/optee/Kconfig
create mode 100644 drivers/tee/optee/Makefile
create mode 100644 drivers/tee/optee/call.c
create mode 100644 drivers/tee/optee/core.c
create mode 100644 drivers/tee/optee/optee_msg.h
create mode 100644 drivers/tee/optee/optee_private.h
create mode 100644 drivers/tee/optee/optee_smc.h
create mode 100644 drivers/tee/optee/rpc.c
create mode 100644 drivers/tee/optee/supp.c
create mode 100644 drivers/tee/tee_core.c
create mode 100644 drivers/tee/tee_private.h
create mode 100644 drivers/tee/tee_shm.c
create mode 100644 drivers/tee/tee_shm_pool.c
create mode 100644 include/linux/tee_drv.h
create mode 100644 include/uapi/linux/tee.h
--
1.9.1
^ permalink raw reply
* [PATCH v12 1/4] dt/bindings: add bindings for optee
From: Jens Wiklander @ 2016-09-16 11:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1474024167-23253-1-git-send-email-jens.wiklander@linaro.org>
Introduces linaro prefix and adds bindings for ARM TrustZone based OP-TEE
implementation.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
---
.../bindings/arm/firmware/linaro,optee-tz.txt | 31 ++++++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
2 files changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt
diff --git a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt
new file mode 100644
index 0000000..d38834c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt
@@ -0,0 +1,31 @@
+OP-TEE Device Tree Bindings
+
+OP-TEE is a piece of software using hardware features to provide a Trusted
+Execution Environment. The security can be provided with ARM TrustZone, but
+also by virtualization or a separate chip.
+
+We're using "linaro" as the first part of the compatible property for
+the reference implementation maintained by Linaro.
+
+* OP-TEE based on ARM TrustZone required properties:
+
+- compatible : should contain "linaro,optee-tz"
+
+- method : The method of calling the OP-TEE Trusted OS. Permitted
+ values are:
+
+ "smc" : SMC #0, with the register assignments specified
+ in drivers/tee/optee/optee_smc.h
+
+ "hvc" : HVC #0, with the register assignments specified
+ in drivers/tee/optee/optee_smc.h
+
+
+
+Example:
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 1992aa9..e62c0ae 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -148,6 +148,7 @@ lacie LaCie
lantiq Lantiq Semiconductor
lenovo Lenovo Group Ltd.
lg LG Corporation
+linaro Linaro Limited
linux Linux-specific binding
lsi LSI Corp. (LSI Logic)
lltc Linear Technology Corporation
--
1.9.1
^ permalink raw reply related
* [PATCH v12 2/4] tee: generic TEE subsystem
From: Jens Wiklander @ 2016-09-16 11:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1474024167-23253-1-git-send-email-jens.wiklander@linaro.org>
Initial patch for generic TEE subsystem.
This subsystem provides:
* Registration/un-registration of TEE drivers.
* Shared memory between normal world and secure world.
* Ioctl interface for interaction with user space.
* Sysfs implementation_id of TEE driver
A TEE (Trusted Execution Environment) driver is a driver that interfaces
with a trusted OS running in some secure environment, for example,
TrustZone on ARM cpus, or a separate secure co-processor etc.
The TEE subsystem can serve a TEE driver for a Global Platform compliant
TEE, but it's not limited to only Global Platform TEEs.
This patch builds on other similar implementations trying to solve
the same problem:
* "optee_linuxdriver" by among others
Jean-michel DELORME<jean-michel.delorme@st.com> and
Emmanuel MICHEL <emmanuel.michel@st.com>
* "Generic TrustZone Driver" by Javier Gonz?lez <javier@javigon.com>
Reviewed-by: Javier Gonz?lez <javier@javigon.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
---
Documentation/ioctl/ioctl-number.txt | 1 +
MAINTAINERS | 7 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/tee/Kconfig | 8 +
drivers/tee/Makefile | 4 +
drivers/tee/tee_core.c | 901 +++++++++++++++++++++++++++++++++++
drivers/tee/tee_private.h | 129 +++++
drivers/tee/tee_shm.c | 357 ++++++++++++++
drivers/tee/tee_shm_pool.c | 158 ++++++
include/linux/tee_drv.h | 278 +++++++++++
include/uapi/linux/tee.h | 403 ++++++++++++++++
12 files changed, 2249 insertions(+)
create mode 100644 drivers/tee/Kconfig
create mode 100644 drivers/tee/Makefile
create mode 100644 drivers/tee/tee_core.c
create mode 100644 drivers/tee/tee_private.h
create mode 100644 drivers/tee/tee_shm.c
create mode 100644 drivers/tee/tee_shm_pool.c
create mode 100644 include/linux/tee_drv.h
create mode 100644 include/uapi/linux/tee.h
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 81c7f2b..efb38da 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -308,6 +308,7 @@ Code Seq#(hex) Include File Comments
0xA3 80-8F Port ACL in development:
<mailto:tlewis@mindspring.com>
0xA3 90-9F linux/dtlk.h
+0xA4 00-1F uapi/linux/tee.h Generic TEE subsystem
0xAA 00-3F linux/uapi/linux/userfaultfd.h
0xAB 00-1F linux/nbd.h
0xAC 00-1F linux/raw.h
diff --git a/MAINTAINERS b/MAINTAINERS
index db814a8..3b21184 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10331,6 +10331,13 @@ F: drivers/hwtracing/stm/
F: include/linux/stm.h
F: include/uapi/linux/stm.h
+TEE SUBSYSTEM
+M: Jens Wiklander <jens.wiklander@linaro.org>
+S: Maintained
+F: include/linux/tee_drv.h
+F: include/uapi/linux/tee.h
+F: drivers/tee/
+
THUNDERBOLT DRIVER
M: Andreas Noever <andreas.noever@gmail.com>
S: Maintained
diff --git a/drivers/Kconfig b/drivers/Kconfig
index e1e2066..de581c1 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -202,4 +202,6 @@ source "drivers/hwtracing/intel_th/Kconfig"
source "drivers/fpga/Kconfig"
+source "drivers/tee/Kconfig"
+
endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 53abb4a..97f7fe5 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -173,3 +173,4 @@ obj-$(CONFIG_STM) += hwtracing/stm/
obj-$(CONFIG_ANDROID) += android/
obj-$(CONFIG_NVMEM) += nvmem/
obj-$(CONFIG_FPGA) += fpga/
+obj-$(CONFIG_TEE) += tee/
diff --git a/drivers/tee/Kconfig b/drivers/tee/Kconfig
new file mode 100644
index 0000000..50c244e
--- /dev/null
+++ b/drivers/tee/Kconfig
@@ -0,0 +1,8 @@
+# Generic Trusted Execution Environment Configuration
+config TEE
+ tristate "Trusted Execution Environment support"
+ select DMA_SHARED_BUFFER
+ select GENERIC_ALLOCATOR
+ help
+ This implements a generic interface towards a Trusted Execution
+ Environment (TEE).
diff --git a/drivers/tee/Makefile b/drivers/tee/Makefile
new file mode 100644
index 0000000..ec64047
--- /dev/null
+++ b/drivers/tee/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_TEE) += tee.o
+tee-objs += tee_core.o
+tee-objs += tee_shm.o
+tee-objs += tee_shm_pool.o
diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c
new file mode 100644
index 0000000..2045210
--- /dev/null
+++ b/drivers/tee/tee_core.c
@@ -0,0 +1,901 @@
+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/idr.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include <linux/uaccess.h>
+#include "tee_private.h"
+
+#define TEE_NUM_DEVICES 32
+
+#define TEE_IOCTL_PARAM_SIZE(x) (sizeof(struct tee_param) * (x))
+
+/*
+ * Unprivileged devices in the lower half range and privileged devices in
+ * the upper half range.
+ */
+static DECLARE_BITMAP(dev_mask, TEE_NUM_DEVICES);
+static DEFINE_SPINLOCK(driver_lock);
+
+static struct class *tee_class;
+static dev_t tee_devt;
+
+static int tee_open(struct inode *inode, struct file *filp)
+{
+ int rc;
+ struct tee_device *teedev;
+ struct tee_context *ctx;
+
+ teedev = container_of(inode->i_cdev, struct tee_device, cdev);
+ if (!tee_device_get(teedev))
+ return -EINVAL;
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx) {
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ ctx->teedev = teedev;
+ INIT_LIST_HEAD(&ctx->list_shm);
+ filp->private_data = ctx;
+ rc = teedev->desc->ops->open(ctx);
+ if (rc)
+ goto err;
+
+ return 0;
+err:
+ kfree(ctx);
+ tee_device_put(teedev);
+ return rc;
+}
+
+static int tee_release(struct inode *inode, struct file *filp)
+{
+ struct tee_context *ctx = filp->private_data;
+ struct tee_device *teedev = ctx->teedev;
+ struct tee_shm *shm;
+
+ ctx->teedev->desc->ops->release(ctx);
+ mutex_lock(&ctx->teedev->mutex);
+ list_for_each_entry(shm, &ctx->list_shm, link)
+ shm->ctx = NULL;
+ mutex_unlock(&ctx->teedev->mutex);
+ kfree(ctx);
+ tee_device_put(teedev);
+ return 0;
+}
+
+static int tee_ioctl_version(struct tee_context *ctx,
+ struct tee_ioctl_version_data __user *uvers)
+{
+ struct tee_ioctl_version_data vers;
+
+ ctx->teedev->desc->ops->get_version(ctx->teedev, &vers);
+ if (copy_to_user(uvers, &vers, sizeof(vers)))
+ return -EFAULT;
+ return 0;
+}
+
+static int tee_ioctl_shm_alloc(struct tee_context *ctx,
+ struct tee_ioctl_shm_alloc_data __user *udata)
+{
+ long ret;
+ struct tee_ioctl_shm_alloc_data data;
+ struct tee_shm *shm;
+
+ if (copy_from_user(&data, udata, sizeof(data)))
+ return -EFAULT;
+
+ /* Currently no input flags are supported */
+ if (data.flags)
+ return -EINVAL;
+
+ data.id = -1;
+
+ shm = tee_shm_alloc(ctx, data.size, TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
+ if (IS_ERR(shm))
+ return PTR_ERR(shm);
+
+ data.id = shm->id;
+ data.flags = shm->flags;
+ data.size = shm->size;
+
+ if (copy_to_user(udata, &data, sizeof(data)))
+ ret = -EFAULT;
+ else
+ ret = tee_shm_get_fd(shm);
+
+ /*
+ * When user space closes the file descriptor the shared memory
+ * should be freed or if tee_shm_get_fd() failed then it will
+ * be freed immediately.
+ */
+ tee_shm_put(shm);
+ return ret;
+}
+
+static int params_from_user(struct tee_context *ctx, struct tee_param *params,
+ size_t num_params,
+ struct tee_ioctl_param __user *uparams)
+{
+ size_t n;
+
+ for (n = 0; n < num_params; n++) {
+ struct tee_shm *shm;
+ struct tee_ioctl_param ip;
+
+ if (copy_from_user(&ip, uparams + n, sizeof(ip)))
+ return -EFAULT;
+
+ /* All unused attribute bits has to be zero */
+ if (ip.attr & ~TEE_IOCTL_PARAM_ATTR_TYPE_MASK)
+ return -EINVAL;
+
+ params[n].attr = ip.attr;
+ switch (ip.attr) {
+ case TEE_IOCTL_PARAM_ATTR_TYPE_NONE:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT:
+ break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT:
+ params[n].u.value.a = ip.u.value.a;
+ params[n].u.value.b = ip.u.value.b;
+ params[n].u.value.c = ip.u.value.c;
+ break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT:
+ /*
+ * If we fail to get a pointer to a shared memory
+ * object (and increase the ref count) from an
+ * identifier we return an error. All pointers that
+ * has been added in params have an increased ref
+ * count. It's the callers responibility to do
+ * tee_shm_put() on all resolved pointers.
+ */
+ shm = tee_shm_get_from_id(ctx, ip.u.memref.shm_id);
+ if (IS_ERR(shm))
+ return PTR_ERR(shm);
+
+ params[n].u.memref.shm_offs = ip.u.memref.shm_offs;
+ params[n].u.memref.size = ip.u.memref.size;
+ params[n].u.memref.shm = shm;
+ break;
+ default:
+ /* Unknown attribute */
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static int params_to_user(struct tee_ioctl_param __user *uparams,
+ size_t num_params, struct tee_param *params)
+{
+ size_t n;
+
+ for (n = 0; n < num_params; n++) {
+ struct tee_ioctl_param __user *up = uparams + n;
+ struct tee_param *p = params + n;
+
+ switch (p->attr) {
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT:
+ if (put_user(p->u.value.a, &up->u.value.a) ||
+ put_user(p->u.value.b, &up->u.value.b) ||
+ put_user(p->u.value.c, &up->u.value.c))
+ return -EFAULT;
+ break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT:
+ if (put_user((u64)p->u.memref.size, &up->u.memref.size))
+ return -EFAULT;
+ default:
+ break;
+ }
+ }
+ return 0;
+}
+
+static bool param_is_memref(struct tee_param *param)
+{
+ switch (param->attr & TEE_IOCTL_PARAM_ATTR_TYPE_MASK) {
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int tee_ioctl_open_session(struct tee_context *ctx,
+ struct tee_ioctl_buf_data __user *ubuf)
+{
+ int rc;
+ size_t n;
+ struct tee_ioctl_buf_data buf;
+ struct tee_ioctl_open_session_arg __user *uarg;
+ struct tee_ioctl_open_session_arg arg;
+ struct tee_ioctl_param __user *uparams = NULL;
+ struct tee_param *params = NULL;
+ bool have_session = false;
+
+ if (!ctx->teedev->desc->ops->open_session)
+ return -EINVAL;
+
+ if (copy_from_user(&buf, ubuf, sizeof(buf)))
+ return -EFAULT;
+
+ if (buf.buf_len > TEE_MAX_ARG_SIZE ||
+ buf.buf_len < sizeof(struct tee_ioctl_open_session_arg))
+ return -EINVAL;
+
+ uarg = (struct tee_ioctl_open_session_arg __user *)(unsigned long)
+ buf.buf_ptr;
+ if (copy_from_user(&arg, uarg, sizeof(arg)))
+ return -EFAULT;
+
+ if (sizeof(arg) + TEE_IOCTL_PARAM_SIZE(arg.num_params) != buf.buf_len)
+ return -EINVAL;
+
+ if (arg.num_params) {
+ params = kcalloc(arg.num_params, sizeof(struct tee_param),
+ GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+ uparams = (struct tee_ioctl_param __user *)(uarg + 1);
+ rc = params_from_user(ctx, params, arg.num_params, uparams);
+ if (rc)
+ goto out;
+ }
+
+ rc = ctx->teedev->desc->ops->open_session(ctx, &arg, params);
+ if (rc)
+ goto out;
+ have_session = true;
+
+ if (put_user(arg.session, &uarg->session) ||
+ put_user(arg.ret, &uarg->ret) ||
+ put_user(arg.ret_origin, &uarg->ret_origin)) {
+ rc = -EFAULT;
+ goto out;
+ }
+ rc = params_to_user(uparams, arg.num_params, params);
+out:
+ /*
+ * If we've succeeded to open the session but failed to communicate
+ * it back to user space, close the session again to avoid leakage.
+ */
+ if (rc && have_session && ctx->teedev->desc->ops->close_session)
+ ctx->teedev->desc->ops->close_session(ctx, arg.session);
+
+ if (params) {
+ /* Decrease ref count for all valid shared memory pointers */
+ for (n = 0; n < arg.num_params; n++)
+ if (param_is_memref(params + n) &&
+ params[n].u.memref.shm)
+ tee_shm_put(params[n].u.memref.shm);
+ kfree(params);
+ }
+
+ return rc;
+}
+
+static int tee_ioctl_invoke(struct tee_context *ctx,
+ struct tee_ioctl_buf_data __user *ubuf)
+{
+ int rc;
+ size_t n;
+ struct tee_ioctl_buf_data buf;
+ struct tee_ioctl_invoke_arg __user *uarg;
+ struct tee_ioctl_invoke_arg arg;
+ struct tee_ioctl_param __user *uparams = NULL;
+ struct tee_param *params = NULL;
+
+ if (!ctx->teedev->desc->ops->invoke_func)
+ return -EINVAL;
+
+ if (copy_from_user(&buf, ubuf, sizeof(buf)))
+ return -EFAULT;
+
+ if (buf.buf_len > TEE_MAX_ARG_SIZE ||
+ buf.buf_len < sizeof(struct tee_ioctl_invoke_arg))
+ return -EINVAL;
+
+ uarg = (struct tee_ioctl_invoke_arg __user *)(unsigned long)buf.buf_ptr;
+ if (copy_from_user(&arg, uarg, sizeof(arg)))
+ return -EFAULT;
+
+ if (sizeof(arg) + TEE_IOCTL_PARAM_SIZE(arg.num_params) != buf.buf_len)
+ return -EINVAL;
+
+ if (arg.num_params) {
+ params = kcalloc(arg.num_params, sizeof(struct tee_param),
+ GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+ uparams = (struct tee_ioctl_param __user *)(uarg + 1);
+ rc = params_from_user(ctx, params, arg.num_params, uparams);
+ if (rc)
+ goto out;
+ }
+
+ rc = ctx->teedev->desc->ops->invoke_func(ctx, &arg, params);
+ if (rc)
+ goto out;
+
+ if (put_user(arg.ret, &uarg->ret) ||
+ put_user(arg.ret_origin, &uarg->ret_origin)) {
+ rc = -EFAULT;
+ goto out;
+ }
+ rc = params_to_user(uparams, arg.num_params, params);
+out:
+ if (params) {
+ /* Decrease ref count for all valid shared memory pointers */
+ for (n = 0; n < arg.num_params; n++)
+ if (param_is_memref(params + n) &&
+ params[n].u.memref.shm)
+ tee_shm_put(params[n].u.memref.shm);
+ kfree(params);
+ }
+ return rc;
+}
+
+static int tee_ioctl_cancel(struct tee_context *ctx,
+ struct tee_ioctl_cancel_arg __user *uarg)
+{
+ struct tee_ioctl_cancel_arg arg;
+
+ if (!ctx->teedev->desc->ops->cancel_req)
+ return -EINVAL;
+
+ if (copy_from_user(&arg, uarg, sizeof(arg)))
+ return -EFAULT;
+
+ return ctx->teedev->desc->ops->cancel_req(ctx, arg.cancel_id,
+ arg.session);
+}
+
+static int
+tee_ioctl_close_session(struct tee_context *ctx,
+ struct tee_ioctl_close_session_arg __user *uarg)
+{
+ struct tee_ioctl_close_session_arg arg;
+
+ if (!ctx->teedev->desc->ops->close_session)
+ return -EINVAL;
+
+ if (copy_from_user(&arg, uarg, sizeof(arg)))
+ return -EFAULT;
+
+ return ctx->teedev->desc->ops->close_session(ctx, arg.session);
+}
+
+static int params_to_supp(struct tee_context *ctx,
+ struct tee_ioctl_param __user *uparams,
+ size_t num_params, struct tee_param *params)
+{
+ size_t n;
+
+ for (n = 0; n < num_params; n++) {
+ struct tee_ioctl_param ip;
+ struct tee_param *p = params + n;
+
+ ip.attr = p->attr & TEE_IOCTL_PARAM_ATTR_TYPE_MASK;
+ switch (p->attr) {
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT:
+ ip.u.value.a = p->u.value.a;
+ ip.u.value.b = p->u.value.b;
+ ip.u.value.c = p->u.value.c;
+ break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT:
+ ip.u.memref.size = p->u.memref.size;
+ if (!p->u.memref.shm) {
+ ip.u.memref.shm_offs = 0;
+ ip.u.memref.shm_id = -1;
+ break;
+ }
+ ip.u.memref.shm_offs = p->u.memref.shm_offs;
+ ip.u.memref.shm_id = p->u.memref.shm->id;
+ break;
+ default:
+ memset(&ip.u, 0, sizeof(ip.u));
+ break;
+ }
+
+ if (copy_to_user(uparams + n, &ip, sizeof(ip)))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int tee_ioctl_supp_recv(struct tee_context *ctx,
+ struct tee_ioctl_buf_data __user *ubuf)
+{
+ int rc;
+ struct tee_ioctl_buf_data buf;
+ struct tee_iocl_supp_recv_arg __user *uarg;
+ struct tee_param *params;
+ struct tee_ioctl_param __user *uparams;
+ u32 num_params;
+ u32 func;
+
+ if (!ctx->teedev->desc->ops->supp_recv)
+ return -EINVAL;
+
+ if (copy_from_user(&buf, ubuf, sizeof(buf)))
+ return -EFAULT;
+
+ if (buf.buf_len > TEE_MAX_ARG_SIZE ||
+ buf.buf_len < sizeof(struct tee_iocl_supp_recv_arg))
+ return -EINVAL;
+
+ uarg = (struct tee_iocl_supp_recv_arg __user *)(unsigned long)
+ buf.buf_ptr;
+ if (get_user(num_params, &uarg->num_params))
+ return -EFAULT;
+
+ if (sizeof(*uarg) + TEE_IOCTL_PARAM_SIZE(num_params) != buf.buf_len)
+ return -EINVAL;
+
+ params = kcalloc(num_params, sizeof(struct tee_param), GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+
+ rc = ctx->teedev->desc->ops->supp_recv(ctx, &func, &num_params, params);
+ if (rc)
+ goto out;
+
+ if (put_user(func, &uarg->func) ||
+ put_user(num_params, &uarg->num_params)) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ uparams = (struct tee_ioctl_param __user *)(uarg + 1);
+ rc = params_to_supp(ctx, uparams, num_params, params);
+out:
+ kfree(params);
+ return rc;
+}
+
+static int params_from_supp(struct tee_param *params, size_t num_params,
+ struct tee_ioctl_param __user *uparams)
+{
+ size_t n;
+
+ for (n = 0; n < num_params; n++) {
+ struct tee_param *p = params + n;
+ struct tee_ioctl_param ip;
+
+ if (copy_from_user(&ip, uparams + n, sizeof(ip)))
+ return -EFAULT;
+
+ /* All unused attribute bits has to be zero */
+ if (ip.attr & ~TEE_IOCTL_PARAM_ATTR_TYPE_MASK)
+ return -EINVAL;
+
+ p->attr = ip.attr;
+ switch (ip.attr) {
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT:
+ /* Only out and in/out values can be updated */
+ p->u.value.a = ip.u.value.a;
+ p->u.value.b = ip.u.value.b;
+ p->u.value.c = ip.u.value.c;
+ break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT:
+ /*
+ * Only the size of the memref can be updated.
+ * Since we don't have access to the original
+ * parameters here, only store the supplied size.
+ * The driver will copy the updated size into the
+ * original parameters.
+ */
+ p->u.memref.shm = NULL;
+ p->u.memref.shm_offs = 0;
+ p->u.memref.size = ip.u.memref.size;
+ break;
+ default:
+ memset(&p->u, 0, sizeof(p->u));
+ break;
+ }
+ }
+ return 0;
+}
+
+static int tee_ioctl_supp_send(struct tee_context *ctx,
+ struct tee_ioctl_buf_data __user *ubuf)
+{
+ long rc;
+ struct tee_ioctl_buf_data buf;
+ struct tee_iocl_supp_send_arg __user *uarg;
+ struct tee_param *params;
+ struct tee_ioctl_param __user *uparams;
+ u32 num_params;
+ u32 ret;
+
+ /* Not valid for this driver */
+ if (!ctx->teedev->desc->ops->supp_send)
+ return -EINVAL;
+
+ if (copy_from_user(&buf, ubuf, sizeof(buf)))
+ return -EFAULT;
+
+ if (buf.buf_len > TEE_MAX_ARG_SIZE ||
+ buf.buf_len < sizeof(struct tee_iocl_supp_send_arg))
+ return -EINVAL;
+
+ uarg = (struct tee_iocl_supp_send_arg __user *)(unsigned long)
+ buf.buf_ptr;
+ if (get_user(ret, &uarg->ret) ||
+ get_user(num_params, &uarg->num_params))
+ return -EFAULT;
+
+ if (sizeof(*uarg) + TEE_IOCTL_PARAM_SIZE(num_params) > buf.buf_len)
+ return -EINVAL;
+
+ params = kcalloc(num_params, sizeof(struct tee_param), GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+
+ uparams = (struct tee_ioctl_param __user *)(uarg + 1);
+ rc = params_from_supp(params, num_params, uparams);
+ if (rc)
+ goto out;
+
+ rc = ctx->teedev->desc->ops->supp_send(ctx, ret, num_params, params);
+out:
+ kfree(params);
+ return rc;
+}
+
+static long tee_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+ struct tee_context *ctx = filp->private_data;
+ void __user *uarg = (void __user *)arg;
+
+ switch (cmd) {
+ case TEE_IOC_VERSION:
+ return tee_ioctl_version(ctx, uarg);
+ case TEE_IOC_SHM_ALLOC:
+ return tee_ioctl_shm_alloc(ctx, uarg);
+ case TEE_IOC_OPEN_SESSION:
+ return tee_ioctl_open_session(ctx, uarg);
+ case TEE_IOC_INVOKE:
+ return tee_ioctl_invoke(ctx, uarg);
+ case TEE_IOC_CANCEL:
+ return tee_ioctl_cancel(ctx, uarg);
+ case TEE_IOC_CLOSE_SESSION:
+ return tee_ioctl_close_session(ctx, uarg);
+ case TEE_IOC_SUPPL_RECV:
+ return tee_ioctl_supp_recv(ctx, uarg);
+ case TEE_IOC_SUPPL_SEND:
+ return tee_ioctl_supp_send(ctx, uarg);
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct file_operations tee_fops = {
+ .owner = THIS_MODULE,
+ .open = tee_open,
+ .release = tee_release,
+ .unlocked_ioctl = tee_ioctl,
+ .compat_ioctl = tee_ioctl,
+};
+
+static void tee_release_device(struct device *dev)
+{
+ struct tee_device *teedev = container_of(dev, struct tee_device, dev);
+
+ spin_lock(&driver_lock);
+ clear_bit(teedev->id, dev_mask);
+ spin_unlock(&driver_lock);
+ mutex_destroy(&teedev->mutex);
+ kfree(teedev);
+}
+
+/**
+ * tee_device_alloc() - Allocate a new struct tee_device instance
+ * @teedesc: Descriptor for this driver
+ * @dev: Parent device for this device
+ * @pool: Shared memory pool, NULL if not used
+ * @driver_data: Private driver data for this device
+ *
+ * Allocates a new struct tee_device instance. The device is
+ * removed by tee_device_unregister().
+ *
+ * @returns a pointer to a 'struct tee_device' or an ERR_PTR on failure
+ */
+struct tee_device *tee_device_alloc(const struct tee_desc *teedesc,
+ struct device *dev,
+ struct tee_shm_pool *pool,
+ void *driver_data)
+{
+ struct tee_device *teedev;
+ void *ret;
+ int rc;
+ int offs = 0;
+
+ if (!teedesc || !teedesc->name || !teedesc->ops ||
+ !teedesc->ops->get_version || !teedesc->ops->open ||
+ !teedesc->ops->release || !dev || !pool)
+ return ERR_PTR(-EINVAL);
+
+ teedev = kzalloc(sizeof(*teedev), GFP_KERNEL);
+ if (!teedev) {
+ ret = ERR_PTR(-ENOMEM);
+ goto err;
+ }
+
+ if (teedesc->flags & TEE_DESC_PRIVILEGED)
+ offs = TEE_NUM_DEVICES / 2;
+
+ spin_lock(&driver_lock);
+ teedev->id = find_next_zero_bit(dev_mask, TEE_NUM_DEVICES, offs);
+ if (teedev->id < TEE_NUM_DEVICES)
+ set_bit(teedev->id, dev_mask);
+ spin_unlock(&driver_lock);
+
+ if (teedev->id >= TEE_NUM_DEVICES) {
+ ret = ERR_PTR(-ENOMEM);
+ goto err;
+ }
+
+ snprintf(teedev->name, sizeof(teedev->name), "tee%s%d",
+ teedesc->flags & TEE_DESC_PRIVILEGED ? "priv" : "",
+ teedev->id - offs);
+
+ teedev->dev.class = tee_class;
+ teedev->dev.release = tee_release_device;
+ teedev->dev.parent = dev;
+
+ teedev->dev.devt = MKDEV(MAJOR(tee_devt), teedev->id);
+
+ rc = dev_set_name(&teedev->dev, "%s", teedev->name);
+ if (rc) {
+ ret = ERR_PTR(rc);
+ goto err_devt;
+ }
+
+ cdev_init(&teedev->cdev, &tee_fops);
+ teedev->cdev.owner = teedesc->owner;
+ teedev->cdev.kobj.parent = &teedev->dev.kobj;
+
+ dev_set_drvdata(&teedev->dev, driver_data);
+ device_initialize(&teedev->dev);
+
+ /* 1 as tee_device_unregister() does one final tee_device_put() */
+ teedev->num_users = 1;
+ init_completion(&teedev->c_no_users);
+ mutex_init(&teedev->mutex);
+
+ teedev->desc = teedesc;
+ teedev->pool = pool;
+
+ return teedev;
+err_devt:
+ unregister_chrdev_region(teedev->dev.devt, 1);
+err:
+ dev_err(dev, "could not register %s driver\n",
+ teedesc->flags & TEE_DESC_PRIVILEGED ? "privileged" : "client");
+ if (teedev && teedev->id < TEE_NUM_DEVICES) {
+ spin_lock(&driver_lock);
+ clear_bit(teedev->id, dev_mask);
+ spin_unlock(&driver_lock);
+ }
+ kfree(teedev);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tee_device_alloc);
+
+static ssize_t implementation_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct tee_device *teedev = container_of(dev, struct tee_device, dev);
+ struct tee_ioctl_version_data vers;
+
+ teedev->desc->ops->get_version(teedev, &vers);
+ return scnprintf(buf, PAGE_SIZE, "%d\n", vers.impl_id);
+}
+static DEVICE_ATTR_RO(implementation_id);
+
+static struct attribute *tee_dev_attrs[] = {
+ &dev_attr_implementation_id.attr,
+ NULL
+};
+
+static const struct attribute_group tee_dev_group = {
+ .attrs = tee_dev_attrs,
+};
+
+/**
+ * tee_device_register() - Registers a TEE device
+ * @teedev: Device to register
+ *
+ * tee_device_unregister() need to be called to remove the @teedev if
+ * this function fails.
+ *
+ * @returns < 0 on failure
+ */
+int tee_device_register(struct tee_device *teedev)
+{
+ int rc;
+
+ /*
+ * If the teedev already is registered, don't do it again. It's
+ * obviously an error to try to register twice, but if we return
+ * an error we'll force the driver to remove the teedev.
+ */
+ if (teedev->flags & TEE_DEVICE_FLAG_REGISTERED) {
+ dev_err(&teedev->dev, "attempt to register twice\n");
+ return 0;
+ }
+
+ rc = cdev_add(&teedev->cdev, teedev->dev.devt, 1);
+ if (rc) {
+ dev_err(&teedev->dev,
+ "unable to cdev_add() %s, major %d, minor %d, err=%d\n",
+ teedev->name, MAJOR(teedev->dev.devt),
+ MINOR(teedev->dev.devt), rc);
+ return rc;
+ }
+
+ rc = device_add(&teedev->dev);
+ if (rc) {
+ dev_err(&teedev->dev,
+ "unable to device_add() %s, major %d, minor %d, err=%d\n",
+ teedev->name, MAJOR(teedev->dev.devt),
+ MINOR(teedev->dev.devt), rc);
+ goto err_device_add;
+ }
+
+ rc = sysfs_create_group(&teedev->dev.kobj, &tee_dev_group);
+ if (rc) {
+ dev_err(&teedev->dev,
+ "failed to create sysfs attributes, err=%d\n", rc);
+ goto err_sysfs_create_group;
+ }
+
+ teedev->flags |= TEE_DEVICE_FLAG_REGISTERED;
+ return 0;
+
+err_sysfs_create_group:
+ device_del(&teedev->dev);
+err_device_add:
+ cdev_del(&teedev->cdev);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(tee_device_register);
+
+void tee_device_put(struct tee_device *teedev)
+{
+ mutex_lock(&teedev->mutex);
+ /* Shouldn't put in this state */
+ if (!WARN_ON(!teedev->desc)) {
+ teedev->num_users--;
+ if (!teedev->num_users) {
+ teedev->desc = NULL;
+ complete(&teedev->c_no_users);
+ }
+ }
+ mutex_unlock(&teedev->mutex);
+}
+
+bool tee_device_get(struct tee_device *teedev)
+{
+ mutex_lock(&teedev->mutex);
+ if (!teedev->desc) {
+ mutex_unlock(&teedev->mutex);
+ return false;
+ }
+ teedev->num_users++;
+ mutex_unlock(&teedev->mutex);
+ return true;
+}
+
+/**
+ * tee_device_unregister() - Removes a TEE device
+ * @teedev: Device to unregister
+ *
+ * This function should be called to remove the @teedev even if
+ * tee_device_register() hasn't been called yet. Does nothing if
+ * @teedev is NULL.
+ */
+void tee_device_unregister(struct tee_device *teedev)
+{
+ if (!teedev)
+ return;
+
+ if (teedev->flags & TEE_DEVICE_FLAG_REGISTERED) {
+ sysfs_remove_group(&teedev->dev.kobj, &tee_dev_group);
+ cdev_del(&teedev->cdev);
+ device_del(&teedev->dev);
+ }
+
+ tee_device_put(teedev);
+ wait_for_completion(&teedev->c_no_users);
+
+ /*
+ * No need to take a mutex any longer now since teedev->desc was
+ * set to NULL before teedev->c_no_users was completed.
+ */
+
+ teedev->pool = NULL;
+
+ put_device(&teedev->dev);
+}
+EXPORT_SYMBOL_GPL(tee_device_unregister);
+
+/**
+ * tee_get_drvdata() - Return driver_data pointer
+ * @teedev: Device containing the driver_data pointer
+ * @returns the driver_data pointer supplied to tee_register().
+ */
+void *tee_get_drvdata(struct tee_device *teedev)
+{
+ return dev_get_drvdata(&teedev->dev);
+}
+EXPORT_SYMBOL_GPL(tee_get_drvdata);
+
+static int __init tee_init(void)
+{
+ int rc;
+
+ tee_class = class_create(THIS_MODULE, "tee");
+ if (IS_ERR(tee_class)) {
+ pr_err("couldn't create class\n");
+ return PTR_ERR(tee_class);
+ }
+
+ rc = alloc_chrdev_region(&tee_devt, 0, TEE_NUM_DEVICES, "tee");
+ if (rc) {
+ pr_err("failed to allocate char dev region\n");
+ class_destroy(tee_class);
+ tee_class = NULL;
+ }
+
+ return rc;
+}
+
+static void __exit tee_exit(void)
+{
+ class_destroy(tee_class);
+ tee_class = NULL;
+ unregister_chrdev_region(tee_devt, TEE_NUM_DEVICES);
+}
+
+subsys_initcall(tee_init);
+module_exit(tee_exit);
+
+MODULE_AUTHOR("Linaro");
+MODULE_DESCRIPTION("TEE Driver");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tee/tee_private.h b/drivers/tee/tee_private.h
new file mode 100644
index 0000000..21cb6be
--- /dev/null
+++ b/drivers/tee/tee_private.h
@@ -0,0 +1,129 @@
+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef TEE_PRIVATE_H
+#define TEE_PRIVATE_H
+
+#include <linux/cdev.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/kref.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+struct tee_device;
+
+/**
+ * struct tee_shm - shared memory object
+ * @teedev: device used to allocate the object
+ * @ctx: context using the object, if NULL the context is gone
+ * @link link element
+ * @paddr: physical address of the shared memory
+ * @kaddr: virtual address of the shared memory
+ * @size: size of shared memory
+ * @dmabuf: dmabuf used to for exporting to user space
+ * @flags: defined by TEE_SHM_* in tee_drv.h
+ * @id: unique id of a shared memory object on this device
+ */
+struct tee_shm {
+ struct tee_device *teedev;
+ struct tee_context *ctx;
+ struct list_head link;
+ phys_addr_t paddr;
+ void *kaddr;
+ size_t size;
+ struct dma_buf *dmabuf;
+ u32 flags;
+ int id;
+};
+
+struct tee_shm_pool_mgr;
+
+/**
+ * struct tee_shm_pool_mgr_ops - shared memory pool manager operations
+ * @alloc: called when allocating shared memory
+ * @free: called when freeing shared memory
+ */
+struct tee_shm_pool_mgr_ops {
+ int (*alloc)(struct tee_shm_pool_mgr *poolmgr, struct tee_shm *shm,
+ size_t size);
+ void (*free)(struct tee_shm_pool_mgr *poolmgr, struct tee_shm *shm);
+};
+
+/**
+ * struct tee_shm_pool_mgr - shared memory manager
+ * @ops: operations
+ * @private_data: private data for the shared memory manager
+ */
+struct tee_shm_pool_mgr {
+ const struct tee_shm_pool_mgr_ops *ops;
+ void *private_data;
+};
+
+/**
+ * struct tee_shm_pool - shared memory pool
+ * @private_mgr: pool manager for shared memory only between kernel
+ * and secure world
+ * @dma_buf_mgr: pool manager for shared memory exported to user space
+ * @destroy: called when destroying the pool
+ * @private_data: private data for the pool
+ */
+struct tee_shm_pool {
+ struct tee_shm_pool_mgr private_mgr;
+ struct tee_shm_pool_mgr dma_buf_mgr;
+ void (*destroy)(struct tee_shm_pool *pool);
+ void *private_data;
+};
+
+#define TEE_DEVICE_FLAG_REGISTERED 0x1
+#define TEE_MAX_DEV_NAME_LEN 32
+
+/**
+ * struct tee_device - TEE Device representation
+ * @name: name of device
+ * @desc: description of device
+ * @id: unique id of device
+ * @flags: represented by TEE_DEVICE_FLAG_REGISTERED above
+ * @dev: embedded basic device structure
+ * @cdev: embedded cdev
+ * @num_users: number of active users of this device
+ * @c_no_user: completion used when unregistering the device
+ * @mutex: mutex protecting @num_users and @idr
+ * @idr: register of shared memory object allocated on this device
+ * @pool: shared memory pool
+ */
+struct tee_device {
+ char name[TEE_MAX_DEV_NAME_LEN];
+ const struct tee_desc *desc;
+ int id;
+ unsigned int flags;
+
+ struct device dev;
+ struct cdev cdev;
+
+ size_t num_users;
+ struct completion c_no_users;
+ struct mutex mutex; /* protects num_users and idr */
+
+ struct idr idr;
+ struct tee_shm_pool *pool;
+};
+
+int tee_shm_init(void);
+
+int tee_shm_get_fd(struct tee_shm *shm);
+
+bool tee_device_get(struct tee_device *teedev);
+void tee_device_put(struct tee_device *teedev);
+
+#endif /*TEE_PRIVATE_H*/
diff --git a/drivers/tee/tee_shm.c b/drivers/tee/tee_shm.c
new file mode 100644
index 0000000..9fd501c
--- /dev/null
+++ b/drivers/tee/tee_shm.c
@@ -0,0 +1,357 @@
+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/dma-buf.h>
+#include <linux/fdtable.h>
+#include <linux/idr.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include "tee_private.h"
+
+static void tee_shm_release(struct tee_shm *shm)
+{
+ struct tee_device *teedev = shm->teedev;
+ struct tee_shm_pool_mgr *poolm;
+
+ mutex_lock(&teedev->mutex);
+ idr_remove(&teedev->idr, shm->id);
+ if (shm->ctx)
+ list_del(&shm->link);
+ mutex_unlock(&teedev->mutex);
+
+ if (shm->flags & TEE_SHM_DMA_BUF)
+ poolm = &teedev->pool->dma_buf_mgr;
+ else
+ poolm = &teedev->pool->private_mgr;
+
+ poolm->ops->free(poolm, shm);
+ kfree(shm);
+
+ tee_device_put(teedev);
+}
+
+static struct sg_table *tee_shm_op_map_dma_buf(struct dma_buf_attachment
+ *attach, enum dma_data_direction dir)
+{
+ return NULL;
+}
+
+static void tee_shm_op_unmap_dma_buf(struct dma_buf_attachment *attach,
+ struct sg_table *table,
+ enum dma_data_direction dir)
+{
+}
+
+static void tee_shm_op_release(struct dma_buf *dmabuf)
+{
+ struct tee_shm *shm = dmabuf->priv;
+
+ tee_shm_release(shm);
+}
+
+static void *tee_shm_op_kmap_atomic(struct dma_buf *dmabuf, unsigned long pgnum)
+{
+ return NULL;
+}
+
+static void *tee_shm_op_kmap(struct dma_buf *dmabuf, unsigned long pgnum)
+{
+ return NULL;
+}
+
+static int tee_shm_op_mmap(struct dma_buf *dmabuf, struct vm_area_struct *vma)
+{
+ struct tee_shm *shm = dmabuf->priv;
+ size_t size = vma->vm_end - vma->vm_start;
+
+ return remap_pfn_range(vma, vma->vm_start, shm->paddr >> PAGE_SHIFT,
+ size, vma->vm_page_prot);
+}
+
+static struct dma_buf_ops tee_shm_dma_buf_ops = {
+ .map_dma_buf = tee_shm_op_map_dma_buf,
+ .unmap_dma_buf = tee_shm_op_unmap_dma_buf,
+ .release = tee_shm_op_release,
+ .kmap_atomic = tee_shm_op_kmap_atomic,
+ .kmap = tee_shm_op_kmap,
+ .mmap = tee_shm_op_mmap,
+};
+
+/**
+ * tee_shm_alloc() - Allocate shared memory
+ * @ctx: Context that allocates the shared memory
+ * @size: Requested size of shared memory
+ * @flags: Flags setting properties for the requested shared memory.
+ *
+ * Memory allocated as global shared memory is automatically freed when the
+ * TEE file pointer is closed. The @flags field uses the bits defined by
+ * TEE_SHM_* in <linux/tee_drv.h>. TEE_SHM_MAPPED must currently always be
+ * set. If TEE_SHM_DMA_BUF global shared memory will be allocated and
+ * associated with a dma-buf handle, else driver private memory.
+ */
+struct tee_shm *tee_shm_alloc(struct tee_context *ctx, size_t size, u32 flags)
+{
+ struct tee_device *teedev = ctx->teedev;
+ struct tee_shm_pool_mgr *poolm = NULL;
+ struct tee_shm *shm;
+ void *ret;
+ int rc;
+
+ if (!(flags & TEE_SHM_MAPPED)) {
+ dev_err(teedev->dev.parent,
+ "only mapped allocations supported\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if ((flags & ~(TEE_SHM_MAPPED | TEE_SHM_DMA_BUF))) {
+ dev_err(teedev->dev.parent, "invalid shm flags 0x%x", flags);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (!tee_device_get(teedev))
+ return ERR_PTR(-EINVAL);
+
+ if (!teedev->pool) {
+ /* teedev has been detached from driver */
+ ret = ERR_PTR(-EINVAL);
+ goto err_dev_put;
+ }
+
+ shm = kzalloc(sizeof(*shm), GFP_KERNEL);
+ if (!shm) {
+ ret = ERR_PTR(-ENOMEM);
+ goto err_dev_put;
+ }
+
+ shm->flags = flags;
+ shm->teedev = teedev;
+ shm->ctx = ctx;
+ if (flags & TEE_SHM_DMA_BUF)
+ poolm = &teedev->pool->dma_buf_mgr;
+ else
+ poolm = &teedev->pool->private_mgr;
+
+ rc = poolm->ops->alloc(poolm, shm, size);
+ if (rc) {
+ ret = ERR_PTR(rc);
+ goto err_kfree;
+ }
+
+ mutex_lock(&teedev->mutex);
+ shm->id = idr_alloc(&teedev->idr, shm, 1, 0, GFP_KERNEL);
+ mutex_unlock(&teedev->mutex);
+ if (shm->id < 0) {
+ ret = ERR_PTR(shm->id);
+ goto err_pool_free;
+ }
+
+ if (flags & TEE_SHM_DMA_BUF) {
+ DEFINE_DMA_BUF_EXPORT_INFO(exp_info);
+
+ exp_info.ops = &tee_shm_dma_buf_ops;
+ exp_info.size = shm->size;
+ exp_info.flags = O_RDWR;
+ exp_info.priv = shm;
+
+ shm->dmabuf = dma_buf_export(&exp_info);
+ if (IS_ERR(shm->dmabuf)) {
+ ret = ERR_CAST(shm->dmabuf);
+ goto err_rem;
+ }
+ }
+ mutex_lock(&teedev->mutex);
+ list_add_tail(&shm->link, &ctx->list_shm);
+ mutex_unlock(&teedev->mutex);
+
+ return shm;
+err_rem:
+ mutex_lock(&teedev->mutex);
+ idr_remove(&teedev->idr, shm->id);
+ mutex_unlock(&teedev->mutex);
+err_pool_free:
+ poolm->ops->free(poolm, shm);
+err_kfree:
+ kfree(shm);
+err_dev_put:
+ tee_device_put(teedev);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(tee_shm_alloc);
+
+/**
+ * tee_shm_get_fd() - Increase reference count and return file descriptor
+ * @shm: Shared memory handle
+ * @returns user space file descriptor to shared memory
+ */
+int tee_shm_get_fd(struct tee_shm *shm)
+{
+ u32 req_flags = TEE_SHM_MAPPED | TEE_SHM_DMA_BUF;
+ int fd;
+
+ if ((shm->flags & req_flags) != req_flags)
+ return -EINVAL;
+
+ fd = dma_buf_fd(shm->dmabuf, O_CLOEXEC);
+ if (fd >= 0)
+ get_dma_buf(shm->dmabuf);
+ return fd;
+}
+
+/**
+ * tee_shm_free() - Free shared memory
+ * @shm: Handle to shared memory to free
+ */
+void tee_shm_free(struct tee_shm *shm)
+{
+ /*
+ * dma_buf_put() decreases the dmabuf reference counter and will
+ * call tee_shm_release() when the last reference is gone.
+ *
+ * In the case of driver private memory we call tee_shm_release
+ * directly instead as it doesn't have a reference counter.
+ */
+ if (shm->flags & TEE_SHM_DMA_BUF)
+ dma_buf_put(shm->dmabuf);
+ else
+ tee_shm_release(shm);
+}
+EXPORT_SYMBOL_GPL(tee_shm_free);
+
+/**
+ * tee_shm_va2pa() - Get physical address of a virtual address
+ * @shm: Shared memory handle
+ * @va: Virtual address to tranlsate
+ * @pa: Returned physical address
+ * @returns 0 on success and < 0 on failure
+ */
+int tee_shm_va2pa(struct tee_shm *shm, void *va, phys_addr_t *pa)
+{
+ /* Check that we're in the range of the shm */
+ if ((char *)va < (char *)shm->kaddr)
+ return -EINVAL;
+ if ((char *)va >= ((char *)shm->kaddr + shm->size))
+ return -EINVAL;
+
+ return tee_shm_get_pa(
+ shm, (unsigned long)va - (unsigned long)shm->kaddr, pa);
+}
+EXPORT_SYMBOL_GPL(tee_shm_va2pa);
+
+/**
+ * tee_shm_pa2va() - Get virtual address of a physical address
+ * @shm: Shared memory handle
+ * @pa: Physical address to tranlsate
+ * @va: Returned virtual address
+ * @returns 0 on success and < 0 on failure
+ */
+int tee_shm_pa2va(struct tee_shm *shm, phys_addr_t pa, void **va)
+{
+ /* Check that we're in the range of the shm */
+ if (pa < shm->paddr)
+ return -EINVAL;
+ if (pa >= (shm->paddr + shm->size))
+ return -EINVAL;
+
+ if (va) {
+ void *v = tee_shm_get_va(shm, pa - shm->paddr);
+
+ if (IS_ERR(v))
+ return PTR_ERR(v);
+ *va = v;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(tee_shm_pa2va);
+
+/**
+ * tee_shm_get_va() - Get virtual address of a shared memory plus an offset
+ * @shm: Shared memory handle
+ * @offs: Offset from start of this shared memory
+ * @returns virtual address of the shared memory + offs if offs is within
+ * the bounds of this shared memory, else an ERR_PTR
+ */
+void *tee_shm_get_va(struct tee_shm *shm, size_t offs)
+{
+ if (offs >= shm->size)
+ return ERR_PTR(-EINVAL);
+ return (char *)shm->kaddr + offs;
+}
+EXPORT_SYMBOL_GPL(tee_shm_get_va);
+
+/**
+ * tee_shm_get_pa() - Get physical address of a shared memory plus an offset
+ * @shm: Shared memory handle
+ * @offs: Offset from start of this shared memory
+ * @pa: Physical address to return
+ * @returns 0 if offs is within the bounds of this shared memory, else an
+ * error code.
+ */
+int tee_shm_get_pa(struct tee_shm *shm, size_t offs, phys_addr_t *pa)
+{
+ if (offs >= shm->size)
+ return -EINVAL;
+ if (pa)
+ *pa = shm->paddr + offs;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(tee_shm_get_pa);
+
+/**
+ * tee_shm_get_from_id() - Find shared memory object and increase referece count
+ * @ctx: Context owning the shared memory
+ * @id: Id of shared memory object
+ * @returns a pointer to 'struct tee_shm' on success or an ERR_PTR on failure
+ */
+struct tee_shm *tee_shm_get_from_id(struct tee_context *ctx, int id)
+{
+ struct tee_device *teedev;
+ struct tee_shm *shm;
+
+ if (!ctx)
+ return ERR_PTR(-EINVAL);
+
+ teedev = ctx->teedev;
+ mutex_lock(&teedev->mutex);
+ shm = idr_find(&teedev->idr, id);
+ if (!shm || shm->ctx != ctx)
+ shm = ERR_PTR(-EINVAL);
+ else if (shm->flags & TEE_SHM_DMA_BUF)
+ get_dma_buf(shm->dmabuf);
+ mutex_unlock(&teedev->mutex);
+ return shm;
+}
+EXPORT_SYMBOL_GPL(tee_shm_get_from_id);
+
+/**
+ * tee_shm_get_id() - Get id of a shared memory object
+ * @shm: Shared memory handle
+ * @returns id
+ */
+int tee_shm_get_id(struct tee_shm *shm)
+{
+ return shm->id;
+}
+EXPORT_SYMBOL_GPL(tee_shm_get_id);
+
+/**
+ * tee_shm_put() - Decrease reference count on a shared memory handle
+ * @shm: Shared memory handle
+ */
+void tee_shm_put(struct tee_shm *shm)
+{
+ if (shm->flags & TEE_SHM_DMA_BUF)
+ dma_buf_put(shm->dmabuf);
+}
+EXPORT_SYMBOL_GPL(tee_shm_put);
diff --git a/drivers/tee/tee_shm_pool.c b/drivers/tee/tee_shm_pool.c
new file mode 100644
index 0000000..3cb0ad0
--- /dev/null
+++ b/drivers/tee/tee_shm_pool.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/dma-buf.h>
+#include <linux/genalloc.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include "tee_private.h"
+
+static int pool_op_gen_alloc(struct tee_shm_pool_mgr *poolm,
+ struct tee_shm *shm, size_t size)
+{
+ unsigned long va;
+ struct gen_pool *genpool = poolm->private_data;
+ size_t s = roundup(size, 1 << genpool->min_alloc_order);
+
+ va = gen_pool_alloc(genpool, s);
+ if (!va)
+ return -ENOMEM;
+
+ memset((void *)va, 0, s);
+ shm->kaddr = (void *)va;
+ shm->paddr = gen_pool_virt_to_phys(genpool, va);
+ shm->size = s;
+ return 0;
+}
+
+static void pool_op_gen_free(struct tee_shm_pool_mgr *poolm,
+ struct tee_shm *shm)
+{
+ gen_pool_free(poolm->private_data, (unsigned long)shm->kaddr,
+ shm->size);
+ shm->kaddr = NULL;
+}
+
+static const struct tee_shm_pool_mgr_ops pool_ops_generic = {
+ .alloc = pool_op_gen_alloc,
+ .free = pool_op_gen_free,
+};
+
+static void pool_res_mem_destroy(struct tee_shm_pool *pool)
+{
+ gen_pool_destroy(pool->private_mgr.private_data);
+ gen_pool_destroy(pool->dma_buf_mgr.private_data);
+}
+
+static int pool_res_mem_mgr_init(struct tee_shm_pool_mgr *mgr,
+ struct tee_shm_pool_mem_info *info,
+ int min_alloc_order)
+{
+ size_t page_mask = PAGE_SIZE - 1;
+ struct gen_pool *genpool = NULL;
+ int rc;
+
+ /*
+ * Start and end must be page aligned
+ */
+ if ((info->vaddr & page_mask) || (info->paddr & page_mask) ||
+ (info->size & page_mask))
+ return -EINVAL;
+
+ genpool = gen_pool_create(min_alloc_order, -1);
+ if (!genpool)
+ return -ENOMEM;
+
+ gen_pool_set_algo(genpool, gen_pool_best_fit, NULL);
+ rc = gen_pool_add_virt(genpool, info->vaddr, info->paddr, info->size,
+ -1);
+ if (rc) {
+ gen_pool_destroy(genpool);
+ return rc;
+ }
+
+ mgr->private_data = genpool;
+ mgr->ops = &pool_ops_generic;
+ return 0;
+}
+
+/**
+ * tee_shm_pool_alloc_res_mem() - Create a shared memory pool from reserved
+ * memory range
+ * @dev: Device allocating the pool
+ * @priv_info: Information for driver private shared memory pool
+ * @dmabuf_info: Information for dma-buf shared memory pool
+ *
+ * Start and end of pools will must be page aligned.
+ *
+ * Allocation with the flag TEE_SHM_DMA_BUF set will use the range supplied
+ * in @dmabuf, others will use the range provided by @priv.
+ *
+ * @returns pointer to a 'struct tee_shm_pool' or an ERR_PTR on failure.
+ */
+struct tee_shm_pool *
+tee_shm_pool_alloc_res_mem(struct device *dev,
+ struct tee_shm_pool_mem_info *priv_info,
+ struct tee_shm_pool_mem_info *dmabuf_info)
+{
+ struct tee_shm_pool *pool = NULL;
+ int ret;
+
+ pool = kzalloc(sizeof(*pool), GFP_KERNEL);
+ if (!pool) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ /*
+ * Create the pool for driver private shared memory
+ */
+ ret = pool_res_mem_mgr_init(&pool->private_mgr, priv_info,
+ 3 /* 8 byte aligned */);
+ if (ret)
+ goto err;
+
+ /*
+ * Create the pool for dma_buf shared memory
+ */
+ ret = pool_res_mem_mgr_init(&pool->dma_buf_mgr, dmabuf_info,
+ PAGE_SHIFT);
+ if (ret)
+ goto err;
+
+ pool->destroy = pool_res_mem_destroy;
+ return pool;
+err:
+ if (ret == -ENOMEM)
+ dev_err(dev, "can't allocate memory for res_mem shared memory pool\n");
+ if (pool && pool->private_mgr.private_data)
+ gen_pool_destroy(pool->private_mgr.private_data);
+ kfree(pool);
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(tee_shm_pool_alloc_res_mem);
+
+/**
+ * tee_shm_pool_free() - Free a shared memory pool
+ * @pool: The shared memory pool to free
+ *
+ * There must be no remaining shared memory allocated from this pool when
+ * this function is called.
+ */
+void tee_shm_pool_free(struct tee_shm_pool *pool)
+{
+ pool->destroy(pool);
+ kfree(pool);
+}
+EXPORT_SYMBOL_GPL(tee_shm_pool_free);
diff --git a/include/linux/tee_drv.h b/include/linux/tee_drv.h
new file mode 100644
index 0000000..f5d5f45
--- /dev/null
+++ b/include/linux/tee_drv.h
@@ -0,0 +1,278 @@
+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __TEE_DRV_H
+#define __TEE_DRV_H
+
+#include <linux/types.h>
+#include <linux/idr.h>
+#include <linux/list.h>
+#include <linux/tee.h>
+
+/*
+ * The file describes the API provided by the generic TEE driver to the
+ * specific TEE driver.
+ */
+
+#define TEE_SHM_MAPPED 0x1 /* Memory mapped by the kernel */
+#define TEE_SHM_DMA_BUF 0x2 /* Memory with dma-buf handle */
+
+struct tee_device;
+struct tee_shm;
+struct tee_shm_pool;
+
+/**
+ * struct tee_context - driver specific context on file pointer data
+ * @teedev: pointer to this drivers struct tee_device
+ * @list_shm: List of shared memory object owned by this context
+ * @data: driver specific context data, managed by the driver
+ */
+struct tee_context {
+ struct tee_device *teedev;
+ struct list_head list_shm;
+ void *data;
+};
+
+struct tee_param_memref {
+ size_t shm_offs;
+ size_t size;
+ struct tee_shm *shm;
+};
+
+struct tee_param_value {
+ u64 a;
+ u64 b;
+ u64 c;
+};
+
+struct tee_param {
+ u64 attr;
+ union {
+ struct tee_param_memref memref;
+ struct tee_param_value value;
+ } u;
+};
+
+/**
+ * struct tee_driver_ops - driver operations vtable
+ * @get_version: returns version of driver
+ * @open: called when the device file is opened
+ * @release: release this open file
+ * @open_session: open a new session
+ * @close_session: close a session
+ * @invoke_func: invoke a trusted function
+ * @cancel_req: request cancel of an ongoing invoke or open
+ * @supp_revc: called for supplicant to get a command
+ * @supp_send: called for supplicant to send a response
+ */
+struct tee_driver_ops {
+ void (*get_version)(struct tee_device *teedev,
+ struct tee_ioctl_version_data *vers);
+ int (*open)(struct tee_context *ctx);
+ void (*release)(struct tee_context *ctx);
+ int (*open_session)(struct tee_context *ctx,
+ struct tee_ioctl_open_session_arg *arg,
+ struct tee_param *param);
+ int (*close_session)(struct tee_context *ctx, u32 session);
+ int (*invoke_func)(struct tee_context *ctx,
+ struct tee_ioctl_invoke_arg *arg,
+ struct tee_param *param);
+ int (*cancel_req)(struct tee_context *ctx, u32 cancel_id, u32 session);
+ int (*supp_recv)(struct tee_context *ctx, u32 *func, u32 *num_params,
+ struct tee_param *param);
+ int (*supp_send)(struct tee_context *ctx, u32 ret, u32 num_params,
+ struct tee_param *param);
+};
+
+/**
+ * struct tee_desc - Describes the TEE driver to the subsystem
+ * @name: name of driver
+ * @ops: driver operations vtable
+ * @owner: module providing the driver
+ * @flags: Extra properties of driver, defined by TEE_DESC_* below
+ */
+#define TEE_DESC_PRIVILEGED 0x1
+struct tee_desc {
+ const char *name;
+ const struct tee_driver_ops *ops;
+ struct module *owner;
+ u32 flags;
+};
+
+/**
+ * tee_device_alloc() - Allocate a new struct tee_device instance
+ * @teedesc: Descriptor for this driver
+ * @dev: Parent device for this device
+ * @pool: Shared memory pool, NULL if not used
+ * @driver_data: Private driver data for this device
+ *
+ * Allocates a new struct tee_device instance. The device is
+ * removed by tee_device_unregister().
+ *
+ * @returns a pointer to a 'struct tee_device' or an ERR_PTR on failure
+ */
+struct tee_device *tee_device_alloc(const struct tee_desc *teedesc,
+ struct device *dev,
+ struct tee_shm_pool *pool,
+ void *driver_data);
+
+/**
+ * tee_device_register() - Registers a TEE device
+ * @teedev: Device to register
+ *
+ * tee_device_unregister() need to be called to remove the @teedev if
+ * this function fails.
+ *
+ * @returns < 0 on failure
+ */
+int tee_device_register(struct tee_device *teedev);
+
+/**
+ * tee_device_unregister() - Removes a TEE device
+ * @teedev: Device to unregister
+ *
+ * This function should be called to remove the @teedev even if
+ * tee_device_register() hasn't been called yet. Does nothing if
+ * @teedev is NULL.
+ */
+void tee_device_unregister(struct tee_device *teedev);
+
+/**
+ * struct tee_shm_pool_mem_info - holds information needed to create a shared
+ * memory pool
+ * @vaddr: Virtual address of start of pool
+ * @paddr: Physical address of start of pool
+ * @size: Size in bytes of the pool
+ */
+struct tee_shm_pool_mem_info {
+ unsigned long vaddr;
+ phys_addr_t paddr;
+ size_t size;
+};
+
+/**
+ * tee_shm_pool_alloc_res_mem() - Create a shared memory pool from reserved
+ * memory range
+ * @dev: Device allocating the pool
+ * @priv_info: Information for driver private shared memory pool
+ * @dmabuf_info: Information for dma-buf shared memory pool
+ *
+ * Start and end of pools will must be page aligned.
+ *
+ * Allocation with the flag TEE_SHM_DMA_BUF set will use the range supplied
+ * in @dmabuf, others will use the range provided by @priv.
+ *
+ * @returns pointer to a 'struct tee_shm_pool' or an ERR_PTR on failure.
+ */
+struct tee_shm_pool *
+tee_shm_pool_alloc_res_mem(struct device *dev,
+ struct tee_shm_pool_mem_info *priv_info,
+ struct tee_shm_pool_mem_info *dmabuf_info);
+
+/**
+ * tee_shm_pool_free() - Free a shared memory pool
+ * @pool: The shared memory pool to free
+ *
+ * The must be no remaining shared memory allocated from this pool when
+ * this function is called.
+ */
+void tee_shm_pool_free(struct tee_shm_pool *pool);
+
+/**
+ * tee_get_drvdata() - Return driver_data pointer
+ * @returns the driver_data pointer supplied to tee_register().
+ */
+void *tee_get_drvdata(struct tee_device *teedev);
+
+/**
+ * tee_shm_alloc() - Allocate shared memory
+ * @ctx: Context that allocates the shared memory
+ * @size: Requested size of shared memory
+ * @flags: Flags setting properties for the requested shared memory.
+ *
+ * Memory allocated as global shared memory is automatically freed when the
+ * TEE file pointer is closed. The @flags field uses the bits defined by
+ * TEE_SHM_* above. TEE_SHM_MAPPED must currently always be set. If
+ * TEE_SHM_DMA_BUF global shared memory will be allocated and associated
+ * with a dma-buf handle, else driver private memory.
+ *
+ * @returns a pointer to 'struct tee_shm'
+ */
+struct tee_shm *tee_shm_alloc(struct tee_context *ctx, size_t size, u32 flags);
+
+/**
+ * tee_shm_free() - Free shared memory
+ * @shm: Handle to shared memory to free
+ */
+void tee_shm_free(struct tee_shm *shm);
+
+/**
+ * tee_shm_put() - Decrease reference count on a shared memory handle
+ * @shm: Shared memory handle
+ */
+void tee_shm_put(struct tee_shm *shm);
+
+/**
+ * tee_shm_va2pa() - Get physical address of a virtual address
+ * @shm: Shared memory handle
+ * @va: Virtual address to tranlsate
+ * @pa: Returned physical address
+ * @returns 0 on success and < 0 on failure
+ */
+int tee_shm_va2pa(struct tee_shm *shm, void *va, phys_addr_t *pa);
+
+/**
+ * tee_shm_pa2va() - Get virtual address of a physical address
+ * @shm: Shared memory handle
+ * @pa: Physical address to tranlsate
+ * @va: Returned virtual address
+ * @returns 0 on success and < 0 on failure
+ */
+int tee_shm_pa2va(struct tee_shm *shm, phys_addr_t pa, void **va);
+
+/**
+ * tee_shm_get_va() - Get virtual address of a shared memory plus an offset
+ * @shm: Shared memory handle
+ * @offs: Offset from start of this shared memory
+ * @returns virtual address of the shared memory + offs if offs is within
+ * the bounds of this shared memory, else an ERR_PTR
+ */
+void *tee_shm_get_va(struct tee_shm *shm, size_t offs);
+
+/**
+ * tee_shm_get_pa() - Get physical address of a shared memory plus an offset
+ * @shm: Shared memory handle
+ * @offs: Offset from start of this shared memory
+ * @pa: Physical address to return
+ * @returns 0 if offs is within the bounds of this shared memory, else an
+ * error code.
+ */
+int tee_shm_get_pa(struct tee_shm *shm, size_t offs, phys_addr_t *pa);
+
+/**
+ * tee_shm_get_id() - Get id of a shared memory object
+ * @shm: Shared memory handle
+ * @returns id
+ */
+int tee_shm_get_id(struct tee_shm *shm);
+
+/**
+ * tee_shm_get_from_id() - Find shared memory object and increase referece count
+ * @ctx: Context owning the shared memory
+ * @id: Id of shared memory object
+ * @returns a pointer to 'struct tee_shm' on success or an ERR_PTR on failure
+ */
+struct tee_shm *tee_shm_get_from_id(struct tee_context *ctx, int id);
+
+#endif /*__TEE_DRV_H*/
diff --git a/include/uapi/linux/tee.h b/include/uapi/linux/tee.h
new file mode 100644
index 0000000..ddc476e
--- /dev/null
+++ b/include/uapi/linux/tee.h
@@ -0,0 +1,403 @@
+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __TEE_H
+#define __TEE_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * This file describes the API provided by a TEE driver to user space.
+ *
+ * Each TEE driver defines a TEE specific protocol which is used for the
+ * data passed back and forth using TEE_IOC_CMD.
+ */
+
+/* Helpers to make the ioctl defines */
+#define TEE_IOC_MAGIC 0xa4
+#define TEE_IOC_BASE 0
+
+/* Flags relating to shared memory */
+#define TEE_IOCTL_SHM_MAPPED 0x1 /* memory mapped in normal world */
+#define TEE_IOCTL_SHM_DMA_BUF 0x2 /* dma-buf handle on shared memory */
+
+#define TEE_MAX_ARG_SIZE 1024
+
+#define TEE_GEN_CAP_GP (1 << 0)/* GlobalPlatform compliant TEE */
+
+/*
+ * TEE Implementation ID
+ */
+#define TEE_IMPL_ID_OPTEE 1
+
+/*
+ * OP-TEE specific capabilities
+ */
+#define TEE_OPTEE_CAP_TZ (1 << 0)
+
+/**
+ * struct tee_ioctl_version_data - TEE version
+ * @impl_id: [out] TEE implementation id
+ * @impl_caps: [out] Implementation specific capabilities
+ * @gen_caps: [out] Generic capabilities, defined by TEE_GEN_CAPS_* above
+ *
+ * Identifies the TEE implementation, @impl_id is one of TEE_IMPL_ID_* above.
+ * @impl_caps is implementation specific, for example TEE_OPTEE_CAP_*
+ * is valid when @impl_id == TEE_IMPL_ID_OPTEE.
+ */
+struct tee_ioctl_version_data {
+ __u32 impl_id;
+ __u32 impl_caps;
+ __u32 gen_caps;
+};
+
+/**
+ * TEE_IOC_VERSION - query version of TEE
+ *
+ * Takes a tee_ioctl_version_data struct and returns with the TEE version
+ * data filled in.
+ */
+#define TEE_IOC_VERSION _IOR(TEE_IOC_MAGIC, TEE_IOC_BASE + 0, \
+ struct tee_ioctl_version_data)
+
+/**
+ * struct tee_ioctl_shm_alloc_data - Shared memory allocate argument
+ * @size: [in/out] Size of shared memory to allocate
+ * @flags: [in/out] Flags to/from allocation.
+ * @id: [out] Identifier of the shared memory
+ *
+ * The flags field should currently be zero as input. Updated by the call
+ * with actual flags as defined by TEE_IOCTL_SHM_* above.
+ * This structure is used as argument for TEE_IOC_SHM_ALLOC below.
+ */
+struct tee_ioctl_shm_alloc_data {
+ __u64 size;
+ __u32 flags;
+ __s32 id;
+};
+
+/**
+ * TEE_IOC_SHM_ALLOC - allocate shared memory
+ *
+ * Allocates shared memory between the user space process and secure OS.
+ *
+ * Returns a file descriptor on success or < 0 on failure
+ *
+ * The returned file descriptor is used to map the shared memory into user
+ * space. The shared memory is freed when the descriptor is closed and the
+ * memory is unmapped.
+ */
+#define TEE_IOC_SHM_ALLOC _IOWR(TEE_IOC_MAGIC, TEE_IOC_BASE + 1, \
+ struct tee_ioctl_shm_alloc_data)
+
+/**
+ * struct tee_ioctl_buf_data - Variable sized buffer
+ * @buf_ptr: [in] A __user pointer to a buffer
+ * @buf_len: [in] Length of the buffer above
+ *
+ * Used as argument for TEE_IOC_OPEN_SESSION, TEE_IOC_INVOKE,
+ * TEE_IOC_SUPPL_RECV, and TEE_IOC_SUPPL_SEND below.
+ */
+struct tee_ioctl_buf_data {
+ __u64 buf_ptr;
+ __u64 buf_len;
+};
+
+/*
+ * Attributes for struct tee_ioctl_param, selects field in the union
+ */
+#define TEE_IOCTL_PARAM_ATTR_TYPE_NONE 0 /* parameter not used */
+
+/*
+ * These defines value parameters (struct tee_ioctl_param_value)
+ */
+#define TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT 1
+#define TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT 2
+#define TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT 3 /* input and output */
+
+/*
+ * These defines shared memory reference parameters (struct
+ * tee_ioctl_param_memref)
+ */
+#define TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT 5
+#define TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT 6
+#define TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT 7 /* input and output */
+
+/*
+ * Mask for the type part of the attribute, leaves room for more types
+ */
+#define TEE_IOCTL_PARAM_ATTR_TYPE_MASK 0xff
+
+/*
+ * Matches TEEC_LOGIN_* in GP TEE Client API
+ * Are only defined for GP compliant TEEs
+ */
+#define TEE_IOCTL_LOGIN_PUBLIC 0
+#define TEE_IOCTL_LOGIN_USER 1
+#define TEE_IOCTL_LOGIN_GROUP 2
+#define TEE_IOCTL_LOGIN_APPLICATION 4
+#define TEE_IOCTL_LOGIN_USER_APPLICATION 5
+#define TEE_IOCTL_LOGIN_GROUP_APPLICATION 6
+
+/**
+ * struct tee_ioctl_param_memref - memory reference
+ * @shm_offs: Offset into the shared memory object
+ * @size: Size of the buffer
+ * @shm_id: Shared memory identifier
+ *
+ * Shared memory is allocated with TEE_IOC_SHM_ALLOC which returns an
+ * identifier representing the shared memory object. A memref can reference
+ * a part of a shared memory by specifying an offset (@shm_offs) and @size
+ * of the object. To supply the entire shared memory object set @shm_offs
+ * to 0 and @size to the previously returned size of the object.
+ */
+struct tee_ioctl_param_memref {
+ __u64 shm_offs;
+ __u64 size;
+ __s64 shm_id;
+};
+
+/**
+ * struct tee_ioctl_param_value - values
+ * @a: first value
+ * @b: second value
+ * @c: third value
+ *
+ * Value parameters are passed unchecked to the destination
+ */
+struct tee_ioctl_param_value {
+ __u64 a;
+ __u64 b;
+ __u64 c;
+};
+
+/**
+ * struct tee_ioctl_param - parameter
+ * @attr: attributes
+ * @memref: a memory reference
+ * @value: a value
+ *
+ * @attr & TEE_PARAM_ATTR_TYPE_MASK indicates if memref or value is used in
+ * the union. TEE_PARAM_ATTR_TYPE_VALUE_* indicates value and
+ * TEE_PARAM_ATTR_TYPE_MEMREF_* indicates memref. TEE_PARAM_ATTR_TYPE_NONE
+ * indicates that none of the members are used.
+ */
+struct tee_ioctl_param {
+ __u64 attr;
+ union {
+ struct tee_ioctl_param_memref memref;
+ struct tee_ioctl_param_value value;
+ } u;
+};
+
+#define TEE_IOCTL_UUID_LEN 16
+
+/**
+ * struct tee_ioctl_open_session_arg - Open session argument
+ * @uuid: [in] UUID of the Trusted Application
+ * @clnt_uuid: [in] UUID of client
+ * @clnt_login: [in] Login class of client, TEE_IOCTL_LOGIN_* above
+ * @cancel_id: [in] Cancellation id, a unique value to identify this request
+ * @session: [out] Session id
+ * @ret: [out] return value
+ * @ret_origin [out] origin of the return value
+ * @num_params [in] number of parameters following this struct
+ */
+struct tee_ioctl_open_session_arg {
+ __u8 uuid[TEE_IOCTL_UUID_LEN];
+ __u8 clnt_uuid[TEE_IOCTL_UUID_LEN];
+ __u32 clnt_login;
+ __u32 cancel_id;
+ __u32 session;
+ __u32 ret;
+ __u32 ret_origin;
+ __u32 num_params;
+ /*
+ * this struct is 8 byte aligned since the 'struct tee_ioctl_param'
+ * which follows requires 8 byte alignment.
+ *
+ * Commented out element used to visualize the layout dynamic part
+ * of the struct. This field is not available at all if
+ * num_params == 0.
+ *
+ * struct tee_ioctl_param params[num_params];
+ */
+} __aligned(8);
+
+/**
+ * TEE_IOC_OPEN_SESSION - opens a session to a Trusted Application
+ *
+ * Takes a struct tee_ioctl_buf_data which contains a struct
+ * tee_ioctl_open_session_arg followed by any array of struct
+ * tee_ioctl_param
+ */
+#define TEE_IOC_OPEN_SESSION _IOR(TEE_IOC_MAGIC, TEE_IOC_BASE + 2, \
+ struct tee_ioctl_buf_data)
+
+/**
+ * struct tee_ioctl_invoke_func_arg - Invokes a function in a Trusted
+ * Application
+ * @func: [in] Trusted Application function, specific to the TA
+ * @session: [in] Session id
+ * @cancel_id: [in] Cancellation id, a unique value to identify this request
+ * @ret: [out] return value
+ * @ret_origin [out] origin of the return value
+ * @num_params [in] number of parameters following this struct
+ */
+struct tee_ioctl_invoke_arg {
+ __u32 func;
+ __u32 session;
+ __u32 cancel_id;
+ __u32 ret;
+ __u32 ret_origin;
+ __u32 num_params;
+ /*
+ * this struct is 8 byte aligned since the 'struct tee_ioctl_param'
+ * which follows requires 8 byte alignment.
+ *
+ * Commented out element used to visualize the layout dynamic part
+ * of the struct. This field is not available at all if
+ * num_params == 0.
+ *
+ * struct tee_ioctl_param params[num_params];
+ */
+} __aligned(8);
+
+/**
+ * TEE_IOC_INVOKE - Invokes a function in a Trusted Application
+ *
+ * Takes a struct tee_ioctl_buf_data which contains a struct
+ * tee_invoke_func_arg followed by any array of struct tee_param
+ */
+#define TEE_IOC_INVOKE _IOR(TEE_IOC_MAGIC, TEE_IOC_BASE + 3, \
+ struct tee_ioctl_buf_data)
+
+/**
+ * struct tee_ioctl_cancel_arg - Cancels an open session or invoke ioctl
+ * @cancel_id: [in] Cancellation id, a unique value to identify this request
+ * @session: [in] Session id, if the session is opened, else set to 0
+ */
+struct tee_ioctl_cancel_arg {
+ __u32 cancel_id;
+ __u32 session;
+};
+
+/**
+ * TEE_IOC_CANCEL - Cancels an open session or invoke
+ */
+#define TEE_IOC_CANCEL _IOR(TEE_IOC_MAGIC, TEE_IOC_BASE + 4, \
+ struct tee_ioctl_cancel_arg)
+
+/**
+ * struct tee_ioctl_close_session_arg - Closes an open session
+ * @session: [in] Session id
+ */
+struct tee_ioctl_close_session_arg {
+ __u32 session;
+};
+
+/**
+ * TEE_IOC_CLOSE_SESSION - Closes a session
+ */
+#define TEE_IOC_CLOSE_SESSION _IOR(TEE_IOC_MAGIC, TEE_IOC_BASE + 5, \
+ struct tee_ioctl_close_session_arg)
+
+/**
+ * struct tee_iocl_supp_recv_arg - Receive a request for a supplicant function
+ * @func: [in] supplicant function
+ * @num_params [in/out] number of parameters following this struct
+ *
+ * @num_params is the number of params that tee-supplicant has room to
+ * receive when input, @num_params is the number of actual params
+ * tee-supplicant receives when output.
+ */
+struct tee_iocl_supp_recv_arg {
+ __u32 func;
+ __u32 num_params;
+ /*
+ * this struct is 8 byte aligned since the 'struct tee_ioctl_param'
+ * which follows requires 8 byte alignment.
+ *
+ * Commented out element used to visualize the layout dynamic part
+ * of the struct. This field is not available at all if
+ * num_params == 0.
+ *
+ * struct tee_ioctl_param params[num_params];
+ */
+} __aligned(8);
+
+/**
+ * TEE_IOC_SUPPL_RECV - Receive a request for a supplicant function
+ *
+ * Takes a struct tee_ioctl_buf_data which contains a struct
+ * tee_iocl_supp_recv_arg followed by any array of struct tee_param
+ */
+#define TEE_IOC_SUPPL_RECV _IOR(TEE_IOC_MAGIC, TEE_IOC_BASE + 6, \
+ struct tee_ioctl_buf_data)
+
+/**
+ * struct tee_iocl_supp_send_arg - Send a response to a received request
+ * @ret: [out] return value
+ * @num_params [in] number of parameters following this struct
+ */
+struct tee_iocl_supp_send_arg {
+ __u32 ret;
+ __u32 num_params;
+ /*
+ * this struct is 8 byte aligned since the 'struct tee_ioctl_param'
+ * which follows requires 8 byte alignment.
+ *
+ * Commented out element used to visualize the layout dynamic part
+ * of the struct. This field is not available@all if
+ * num_params == 0.
+ *
+ * struct tee_ioctl_param params[num_params];
+ */
+} __aligned(8);
+/**
+ * TEE_IOC_SUPPL_SEND - Receive a request for a supplicant function
+ *
+ * Takes a struct tee_ioctl_buf_data which contains a struct
+ * tee_iocl_supp_send_arg followed by any array of struct tee_param
+ */
+#define TEE_IOC_SUPPL_SEND _IOR(TEE_IOC_MAGIC, TEE_IOC_BASE + 7, \
+ struct tee_ioctl_buf_data)
+
+/*
+ * Five syscalls are used when communicating with the TEE driver.
+ * open(): opens the device associated with the driver
+ * ioctl(): as described above operating on the file descriptor from open()
+ * close(): two cases
+ * - closes the device file descriptor
+ * - closes a file descriptor connected to allocated shared memory
+ * mmap(): maps shared memory into user space using information from struct
+ * tee_ioctl_shm_alloc_data
+ * munmap(): unmaps previously shared memory
+ */
+
+#endif /*__TEE_H*/
--
1.9.1
^ permalink raw reply related
* [PATCH v12 3/4] tee: add OP-TEE driver
From: Jens Wiklander @ 2016-09-16 11:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1474024167-23253-1-git-send-email-jens.wiklander@linaro.org>
Adds a OP-TEE driver which also can be compiled as a loadable module.
* Targets ARM and ARM64
* Supports using reserved memory from OP-TEE as shared memory
* Probes OP-TEE version using SMCs
* Accepts requests on privileged and unprivileged device
* Uses OPTEE message protocol version 2 to communicate with secure world
Reviewed-by: Javier Gonz?lez <javier@javigon.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
---
MAINTAINERS | 5 +
drivers/tee/Kconfig | 10 +
drivers/tee/Makefile | 1 +
drivers/tee/optee/Kconfig | 7 +
drivers/tee/optee/Makefile | 5 +
drivers/tee/optee/call.c | 435 +++++++++++++++++++++++++++
drivers/tee/optee/core.c | 598 ++++++++++++++++++++++++++++++++++++++
drivers/tee/optee/optee_msg.h | 435 +++++++++++++++++++++++++++
drivers/tee/optee/optee_private.h | 185 ++++++++++++
drivers/tee/optee/optee_smc.h | 446 ++++++++++++++++++++++++++++
drivers/tee/optee/rpc.c | 404 +++++++++++++++++++++++++
drivers/tee/optee/supp.c | 273 +++++++++++++++++
12 files changed, 2804 insertions(+)
create mode 100644 drivers/tee/optee/Kconfig
create mode 100644 drivers/tee/optee/Makefile
create mode 100644 drivers/tee/optee/call.c
create mode 100644 drivers/tee/optee/core.c
create mode 100644 drivers/tee/optee/optee_msg.h
create mode 100644 drivers/tee/optee/optee_private.h
create mode 100644 drivers/tee/optee/optee_smc.h
create mode 100644 drivers/tee/optee/rpc.c
create mode 100644 drivers/tee/optee/supp.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 3b21184..089b4ee 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8732,6 +8732,11 @@ F: arch/*/oprofile/
F: drivers/oprofile/
F: include/linux/oprofile.h
+OP-TEE DRIVER
+M: Jens Wiklander <jens.wiklander@linaro.org>
+S: Maintained
+F: drivers/tee/optee/
+
ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
M: Mark Fasheh <mfasheh@suse.com>
M: Joel Becker <jlbec@evilplan.org>
diff --git a/drivers/tee/Kconfig b/drivers/tee/Kconfig
index 50c244e..2330a4e 100644
--- a/drivers/tee/Kconfig
+++ b/drivers/tee/Kconfig
@@ -6,3 +6,13 @@ config TEE
help
This implements a generic interface towards a Trusted Execution
Environment (TEE).
+
+if TEE
+
+menu "TEE drivers"
+
+source "drivers/tee/optee/Kconfig"
+
+endmenu
+
+endif
diff --git a/drivers/tee/Makefile b/drivers/tee/Makefile
index ec64047..7a4e4a1 100644
--- a/drivers/tee/Makefile
+++ b/drivers/tee/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_TEE) += tee.o
tee-objs += tee_core.o
tee-objs += tee_shm.o
tee-objs += tee_shm_pool.o
+obj-$(CONFIG_OPTEE) += optee/
diff --git a/drivers/tee/optee/Kconfig b/drivers/tee/optee/Kconfig
new file mode 100644
index 0000000..0126de8
--- /dev/null
+++ b/drivers/tee/optee/Kconfig
@@ -0,0 +1,7 @@
+# OP-TEE Trusted Execution Environment Configuration
+config OPTEE
+ tristate "OP-TEE"
+ depends on HAVE_ARM_SMCCC
+ help
+ This implements the OP-TEE Trusted Execution Environment (TEE)
+ driver.
diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile
new file mode 100644
index 0000000..92fe578
--- /dev/null
+++ b/drivers/tee/optee/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_OPTEE) += optee.o
+optee-objs += core.o
+optee-objs += call.o
+optee-objs += rpc.o
+optee-objs += supp.o
diff --git a/drivers/tee/optee/call.c b/drivers/tee/optee/call.c
new file mode 100644
index 0000000..97fad0e
--- /dev/null
+++ b/drivers/tee/optee/call.c
@@ -0,0 +1,435 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/arm-smccc.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include "optee_private.h"
+#include "optee_smc.h"
+
+struct optee_call_waiter {
+ struct list_head list_node;
+ struct completion c;
+ bool completed;
+};
+
+static void optee_cq_wait_init(struct optee_call_queue *cq,
+ struct optee_call_waiter *w)
+{
+ mutex_lock(&cq->mutex);
+
+ /*
+ * We add ourselves to the queue, but we don't wait. This
+ * guarantees that we don't lose a completion if secure world
+ * returns busy and another thread just exited and try to complete
+ * someone.
+ */
+ w->completed = false;
+ init_completion(&w->c);
+ list_add_tail(&w->list_node, &cq->waiters);
+
+ mutex_unlock(&cq->mutex);
+}
+
+static void optee_cq_wait_for_completion(struct optee_call_queue *cq,
+ struct optee_call_waiter *w)
+{
+ wait_for_completion(&w->c);
+
+ mutex_lock(&cq->mutex);
+
+ /* Move to end of list to get out of the way for other waiters */
+ list_del(&w->list_node);
+ w->completed = false;
+ reinit_completion(&w->c);
+ list_add_tail(&w->list_node, &cq->waiters);
+
+ mutex_unlock(&cq->mutex);
+}
+
+static void optee_cq_complete_one(struct optee_call_queue *cq)
+{
+ struct optee_call_waiter *w;
+
+ list_for_each_entry(w, &cq->waiters, list_node) {
+ if (!w->completed) {
+ complete(&w->c);
+ w->completed = true;
+ break;
+ }
+ }
+}
+
+static void optee_cq_wait_final(struct optee_call_queue *cq,
+ struct optee_call_waiter *w)
+{
+ mutex_lock(&cq->mutex);
+
+ /* Get out of the list */
+ list_del(&w->list_node);
+
+ optee_cq_complete_one(cq);
+ /*
+ * If we're completed we've got a completion that some other task
+ * could have used instead.
+ */
+ if (w->completed)
+ optee_cq_complete_one(cq);
+
+ mutex_unlock(&cq->mutex);
+}
+
+/* Requires the filpstate mutex to be held */
+static struct optee_session *find_session(struct optee_context_data *ctxdata,
+ u32 session_id)
+{
+ struct optee_session *sess;
+
+ list_for_each_entry(sess, &ctxdata->sess_list, list_node)
+ if (sess->session_id == session_id)
+ return sess;
+
+ return NULL;
+}
+
+/**
+ * optee_do_call_with_arg() - Do an SMC to OP-TEE in secure world
+ * @ctx: calling context
+ * @parg: physical address of message to pass to secure world
+ *
+ * Does and SMC to OP-TEE in secure world and handles eventual resulting
+ * Remote Procedure Calls (RPC) from OP-TEE.
+ *
+ * Returns return code from secure world, 0 is OK
+ */
+u32 optee_do_call_with_arg(struct tee_context *ctx, phys_addr_t parg)
+{
+ struct optee *optee = tee_get_drvdata(ctx->teedev);
+ struct optee_call_waiter w;
+ struct optee_rpc_param param = { };
+ u32 ret;
+
+ param.a0 = OPTEE_SMC_CALL_WITH_ARG;
+ reg_pair_from_64(¶m.a1, ¶m.a2, parg);
+ /* Initialize waiter */
+ optee_cq_wait_init(&optee->call_queue, &w);
+ while (true) {
+ struct arm_smccc_res res;
+
+ optee->invoke_fn(param.a0, param.a1, param.a2, param.a3,
+ param.a4, param.a5, param.a6, param.a7,
+ &res);
+
+ if (res.a0 == OPTEE_SMC_RETURN_ETHREAD_LIMIT) {
+ /*
+ * Out of threads in secure world, wait for a thread
+ * become available.
+ */
+ optee_cq_wait_for_completion(&optee->call_queue, &w);
+ } else if (OPTEE_SMC_RETURN_IS_RPC(res.a0)) {
+ param.a0 = res.a0;
+ param.a1 = res.a1;
+ param.a2 = res.a2;
+ param.a3 = res.a3;
+ optee_handle_rpc(ctx, ¶m);
+ } else {
+ ret = res.a0;
+ break;
+ }
+ }
+
+ /*
+ * We're done with our thread in secure world, if there's any
+ * thread waiters wake up one.
+ */
+ optee_cq_wait_final(&optee->call_queue, &w);
+
+ return ret;
+}
+
+static struct tee_shm *get_msg_arg(struct tee_context *ctx, size_t num_params,
+ struct optee_msg_arg **msg_arg,
+ phys_addr_t *msg_parg)
+{
+ int rc;
+ struct tee_shm *shm;
+ struct optee_msg_arg *ma;
+
+ shm = tee_shm_alloc(ctx, OPTEE_MSG_GET_ARG_SIZE(num_params),
+ TEE_SHM_MAPPED);
+ if (IS_ERR(shm))
+ return shm;
+
+ ma = tee_shm_get_va(shm, 0);
+ if (IS_ERR(ma)) {
+ rc = PTR_ERR(ma);
+ goto out;
+ }
+
+ rc = tee_shm_get_pa(shm, 0, msg_parg);
+ if (rc)
+ goto out;
+
+ memset(ma, 0, OPTEE_MSG_GET_ARG_SIZE(num_params));
+ ma->num_params = num_params;
+ *msg_arg = ma;
+out:
+ if (rc) {
+ tee_shm_free(shm);
+ return ERR_PTR(rc);
+ }
+
+ return shm;
+}
+
+int optee_open_session(struct tee_context *ctx,
+ struct tee_ioctl_open_session_arg *arg,
+ struct tee_param *param)
+{
+ struct optee_context_data *ctxdata = ctx->data;
+ int rc;
+ struct tee_shm *shm;
+ struct optee_msg_arg *msg_arg;
+ phys_addr_t msg_parg;
+ struct optee_msg_param *msg_param;
+ struct optee_session *sess = NULL;
+
+ /* +2 for the meta parameters added below */
+ shm = get_msg_arg(ctx, arg->num_params + 2, &msg_arg, &msg_parg);
+ if (IS_ERR(shm))
+ return PTR_ERR(shm);
+
+ msg_arg->cmd = OPTEE_MSG_CMD_OPEN_SESSION;
+ msg_arg->cancel_id = arg->cancel_id;
+ msg_param = OPTEE_MSG_GET_PARAMS(msg_arg);
+
+ /*
+ * Initialize and add the meta parameters needed when opening a
+ * session.
+ */
+ msg_param[0].attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT |
+ OPTEE_MSG_ATTR_META;
+ msg_param[1].attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT |
+ OPTEE_MSG_ATTR_META;
+ memcpy(&msg_param[0].u.value, arg->uuid, sizeof(arg->uuid));
+ memcpy(&msg_param[1].u.value, arg->uuid, sizeof(arg->clnt_uuid));
+ msg_param[1].u.value.c = arg->clnt_login;
+
+ rc = optee_to_msg_param(msg_param + 2, arg->num_params, param);
+ if (rc)
+ goto out;
+
+ sess = kzalloc(sizeof(*sess), GFP_KERNEL);
+ if (!sess) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ if (optee_do_call_with_arg(ctx, msg_parg)) {
+ msg_arg->ret = TEEC_ERROR_COMMUNICATION;
+ msg_arg->ret_origin = TEEC_ORIGIN_COMMS;
+ }
+
+ if (msg_arg->ret == TEEC_SUCCESS) {
+ /* A new session has been created, add it to the list. */
+ sess->session_id = msg_arg->session;
+ mutex_lock(&ctxdata->mutex);
+ list_add(&sess->list_node, &ctxdata->sess_list);
+ mutex_unlock(&ctxdata->mutex);
+ } else {
+ kfree(sess);
+ }
+
+ if (optee_from_msg_param(param, arg->num_params, msg_param + 2)) {
+ arg->ret = TEEC_ERROR_COMMUNICATION;
+ arg->ret_origin = TEEC_ORIGIN_COMMS;
+ /* Close session again to avoid leakage */
+ optee_close_session(ctx, msg_arg->session);
+ } else {
+ arg->session = msg_arg->session;
+ arg->ret = msg_arg->ret;
+ arg->ret_origin = msg_arg->ret_origin;
+ }
+out:
+ tee_shm_free(shm);
+
+ return rc;
+}
+
+int optee_close_session(struct tee_context *ctx, u32 session)
+{
+ struct optee_context_data *ctxdata = ctx->data;
+ struct tee_shm *shm;
+ struct optee_msg_arg *msg_arg;
+ phys_addr_t msg_parg;
+ struct optee_session *sess;
+
+ /* Check that the session is valid and remove it from the list */
+ mutex_lock(&ctxdata->mutex);
+ sess = find_session(ctxdata, session);
+ if (sess)
+ list_del(&sess->list_node);
+ mutex_unlock(&ctxdata->mutex);
+ if (!sess)
+ return -EINVAL;
+ kfree(sess);
+
+ shm = get_msg_arg(ctx, 0, &msg_arg, &msg_parg);
+ if (IS_ERR(shm))
+ return PTR_ERR(shm);
+
+ msg_arg->cmd = OPTEE_MSG_CMD_CLOSE_SESSION;
+ msg_arg->session = session;
+ optee_do_call_with_arg(ctx, msg_parg);
+
+ tee_shm_free(shm);
+ return 0;
+}
+
+int optee_invoke_func(struct tee_context *ctx, struct tee_ioctl_invoke_arg *arg,
+ struct tee_param *param)
+{
+ struct optee_context_data *ctxdata = ctx->data;
+ struct tee_shm *shm;
+ struct optee_msg_arg *msg_arg;
+ phys_addr_t msg_parg;
+ struct optee_msg_param *msg_param;
+ struct optee_session *sess;
+ int rc;
+
+ /* Check that the session is valid */
+ mutex_lock(&ctxdata->mutex);
+ sess = find_session(ctxdata, arg->session);
+ mutex_unlock(&ctxdata->mutex);
+ if (!sess)
+ return -EINVAL;
+
+ shm = get_msg_arg(ctx, arg->num_params, &msg_arg, &msg_parg);
+ if (IS_ERR(shm))
+ return PTR_ERR(shm);
+ msg_arg->cmd = OPTEE_MSG_CMD_INVOKE_COMMAND;
+ msg_arg->func = arg->func;
+ msg_arg->session = arg->session;
+ msg_arg->cancel_id = arg->cancel_id;
+ msg_param = OPTEE_MSG_GET_PARAMS(msg_arg);
+
+ rc = optee_to_msg_param(msg_param, arg->num_params, param);
+ if (rc)
+ goto out;
+
+ if (optee_do_call_with_arg(ctx, msg_parg)) {
+ msg_arg->ret = TEEC_ERROR_COMMUNICATION;
+ msg_arg->ret_origin = TEEC_ORIGIN_COMMS;
+ }
+
+ if (optee_from_msg_param(param, arg->num_params, msg_param)) {
+ msg_arg->ret = TEEC_ERROR_COMMUNICATION;
+ msg_arg->ret_origin = TEEC_ORIGIN_COMMS;
+ }
+
+ arg->ret = msg_arg->ret;
+ arg->ret_origin = msg_arg->ret_origin;
+out:
+ tee_shm_free(shm);
+ return rc;
+}
+
+int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session)
+{
+ struct optee_context_data *ctxdata = ctx->data;
+ struct tee_shm *shm;
+ struct optee_msg_arg *msg_arg;
+ phys_addr_t msg_parg;
+ struct optee_session *sess;
+
+ /* Check that the session is valid */
+ mutex_lock(&ctxdata->mutex);
+ sess = find_session(ctxdata, session);
+ mutex_unlock(&ctxdata->mutex);
+ if (!sess)
+ return -EINVAL;
+
+ shm = get_msg_arg(ctx, 0, &msg_arg, &msg_parg);
+ if (IS_ERR(shm))
+ return PTR_ERR(shm);
+
+ msg_arg->cmd = OPTEE_MSG_CMD_CANCEL;
+ msg_arg->session = session;
+ msg_arg->cancel_id = cancel_id;
+ optee_do_call_with_arg(ctx, msg_parg);
+
+ tee_shm_free(shm);
+ return 0;
+}
+
+/**
+ * optee_enable_shm_cache() - Enables caching of some shared memory allocation
+ * in OP-TEE
+ * @optee: main service struct
+ */
+void optee_enable_shm_cache(struct optee *optee)
+{
+ struct optee_call_waiter w;
+
+ /* We need to retry until secure world isn't busy. */
+ optee_cq_wait_init(&optee->call_queue, &w);
+ while (true) {
+ struct arm_smccc_res res;
+
+ optee->invoke_fn(OPTEE_SMC_ENABLE_SHM_CACHE, 0, 0, 0, 0, 0, 0,
+ 0, &res);
+ if (res.a0 == OPTEE_SMC_RETURN_OK)
+ break;
+ optee_cq_wait_for_completion(&optee->call_queue, &w);
+ }
+ optee_cq_wait_final(&optee->call_queue, &w);
+}
+
+/**
+ * optee_enable_shm_cache() - Disables caching of some shared memory allocation
+ * in OP-TEE
+ * @optee: main service struct
+ */
+void optee_disable_shm_cache(struct optee *optee)
+{
+ struct optee_call_waiter w;
+
+ /* We need to retry until secure world isn't busy. */
+ optee_cq_wait_init(&optee->call_queue, &w);
+ while (true) {
+ union {
+ struct arm_smccc_res smccc;
+ struct optee_smc_disable_shm_cache_result result;
+ } res;
+
+ optee->invoke_fn(OPTEE_SMC_DISABLE_SHM_CACHE, 0, 0, 0, 0, 0, 0,
+ 0, &res.smccc);
+ if (res.result.status == OPTEE_SMC_RETURN_ENOTAVAIL)
+ break; /* All shm's freed */
+ if (res.result.status == OPTEE_SMC_RETURN_OK) {
+ struct tee_shm *shm;
+
+ shm = reg_pair_to_ptr(res.result.shm_upper32,
+ res.result.shm_lower32);
+ tee_shm_free(shm);
+ } else {
+ optee_cq_wait_for_completion(&optee->call_queue, &w);
+ }
+ }
+ optee_cq_wait_final(&optee->call_queue, &w);
+}
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
new file mode 100644
index 0000000..b4fe771
--- /dev/null
+++ b/drivers/tee/optee/core.c
@@ -0,0 +1,598 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/tee_drv.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include "optee_private.h"
+#include "optee_smc.h"
+
+#define DRIVER_NAME "optee"
+
+#define OPTEE_SHM_NUM_PRIV_PAGES 1
+
+/**
+ * optee_from_msg_param() - convert from OPTEE_MSG parameters to
+ * struct tee_param
+ * @params: subsystem internal parameter representation
+ * @num_params: number of elements in the parameter arrays
+ * @msg_params: OPTEE_MSG parameters
+ * Returns 0 on success or <0 on failure
+ */
+int optee_from_msg_param(struct tee_param *params, size_t num_params,
+ const struct optee_msg_param *msg_params)
+{
+ int rc;
+ size_t n;
+ struct tee_shm *shm;
+ phys_addr_t pa;
+
+ for (n = 0; n < num_params; n++) {
+ struct tee_param *p = params + n;
+ const struct optee_msg_param *mp = msg_params + n;
+ u32 attr = mp->attr & OPTEE_MSG_ATTR_TYPE_MASK;
+
+ switch (attr) {
+ case OPTEE_MSG_ATTR_TYPE_NONE:
+ p->attr = TEE_IOCTL_PARAM_ATTR_TYPE_NONE;
+ memset(&p->u, 0, sizeof(p->u));
+ break;
+ case OPTEE_MSG_ATTR_TYPE_VALUE_INPUT:
+ case OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT:
+ case OPTEE_MSG_ATTR_TYPE_VALUE_INOUT:
+ p->attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT +
+ attr - OPTEE_MSG_ATTR_TYPE_VALUE_INPUT;
+ p->u.value.a = mp->u.value.a;
+ p->u.value.b = mp->u.value.b;
+ p->u.value.c = mp->u.value.c;
+ break;
+ case OPTEE_MSG_ATTR_TYPE_TMEM_INPUT:
+ case OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT:
+ case OPTEE_MSG_ATTR_TYPE_TMEM_INOUT:
+ p->attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT +
+ attr - OPTEE_MSG_ATTR_TYPE_TMEM_INPUT;
+ p->u.memref.size = mp->u.tmem.size;
+ shm = (struct tee_shm *)(unsigned long)
+ mp->u.tmem.shm_ref;
+ if (!shm) {
+ p->u.memref.shm_offs = 0;
+ p->u.memref.shm = NULL;
+ break;
+ }
+ rc = tee_shm_get_pa(shm, 0, &pa);
+ if (rc)
+ return rc;
+ p->u.memref.shm_offs = mp->u.tmem.buf_ptr - pa;
+ p->u.memref.shm = shm;
+
+ /* Check that the memref is covered by the shm object */
+ if (p->u.memref.size) {
+ size_t o = p->u.memref.shm_offs +
+ p->u.memref.size - 1;
+
+ rc = tee_shm_get_pa(shm, o, NULL);
+ if (rc)
+ return rc;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+/**
+ * optee_to_msg_param() - convert from struct tee_params to OPTEE_MSG parameters
+ * @msg_params: OPTEE_MSG parameters
+ * @num_params: number of elements in the parameter arrays
+ * @params: subsystem itnernal parameter representation
+ * Returns 0 on success or <0 on failure
+ */
+int optee_to_msg_param(struct optee_msg_param *msg_params, size_t num_params,
+ const struct tee_param *params)
+{
+ int rc;
+ size_t n;
+ phys_addr_t pa;
+
+ for (n = 0; n < num_params; n++) {
+ const struct tee_param *p = params + n;
+ struct optee_msg_param *mp = msg_params + n;
+
+ switch (p->attr) {
+ case TEE_IOCTL_PARAM_ATTR_TYPE_NONE:
+ mp->attr = TEE_IOCTL_PARAM_ATTR_TYPE_NONE;
+ memset(&mp->u, 0, sizeof(mp->u));
+ break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT:
+ mp->attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT + p->attr -
+ TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+ mp->u.value.a = p->u.value.a;
+ mp->u.value.b = p->u.value.b;
+ mp->u.value.c = p->u.value.c;
+ break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT:
+ mp->attr = OPTEE_MSG_ATTR_TYPE_TMEM_INPUT +
+ p->attr -
+ TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT;
+ mp->u.tmem.shm_ref = (unsigned long)p->u.memref.shm;
+ mp->u.tmem.size = p->u.memref.size;
+ if (!p->u.memref.shm) {
+ mp->u.tmem.buf_ptr = 0;
+ break;
+ }
+ rc = tee_shm_get_pa(p->u.memref.shm,
+ p->u.memref.shm_offs, &pa);
+ if (rc)
+ return rc;
+ mp->u.tmem.buf_ptr = pa;
+ mp->attr |= OPTEE_MSG_ATTR_CACHE_PREDEFINED <<
+ OPTEE_MSG_ATTR_CACHE_SHIFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static void optee_get_version(struct tee_device *teedev,
+ struct tee_ioctl_version_data *vers)
+{
+ struct tee_ioctl_version_data v = {
+ .impl_id = TEE_IMPL_ID_OPTEE,
+ .impl_caps = TEE_OPTEE_CAP_TZ,
+ .gen_caps = TEE_GEN_CAP_GP,
+ };
+ *vers = v;
+}
+
+static int optee_open(struct tee_context *ctx)
+{
+ struct optee_context_data *ctxdata;
+ struct tee_device *teedev = ctx->teedev;
+ struct optee *optee = tee_get_drvdata(teedev);
+
+ ctxdata = kzalloc(sizeof(*ctxdata), GFP_KERNEL);
+ if (!ctxdata)
+ return -ENOMEM;
+
+ if (teedev == optee->supp_teedev) {
+ bool busy = true;
+
+ mutex_lock(&optee->supp.ctx_mutex);
+ if (!optee->supp.ctx) {
+ busy = false;
+ optee->supp.ctx = ctx;
+ }
+ mutex_unlock(&optee->supp.ctx_mutex);
+ if (busy) {
+ kfree(ctxdata);
+ return -EBUSY;
+ }
+ }
+
+ mutex_init(&ctxdata->mutex);
+ INIT_LIST_HEAD(&ctxdata->sess_list);
+
+ ctx->data = ctxdata;
+ return 0;
+}
+
+static void optee_release(struct tee_context *ctx)
+{
+ struct optee_context_data *ctxdata = ctx->data;
+ struct tee_device *teedev = ctx->teedev;
+ struct optee *optee = tee_get_drvdata(teedev);
+ struct tee_shm *shm;
+ struct optee_msg_arg *arg = NULL;
+ phys_addr_t parg;
+ struct optee_session *sess;
+ struct optee_session *sess_tmp;
+
+ if (!ctxdata)
+ return;
+
+ shm = tee_shm_alloc(ctx, sizeof(struct optee_msg_arg), TEE_SHM_MAPPED);
+ if (!IS_ERR(shm)) {
+ arg = tee_shm_get_va(shm, 0);
+ /*
+ * If va2pa fails for some reason, we can't call
+ * optee_close_session(), only free the memory. Secure OS
+ * will leak sessions and finally refuse more sessions, but
+ * we will at least let normal world reclaim its memory.
+ */
+ if (!IS_ERR(arg))
+ tee_shm_va2pa(shm, arg, &parg);
+ }
+
+ list_for_each_entry_safe(sess, sess_tmp, &ctxdata->sess_list,
+ list_node) {
+ list_del(&sess->list_node);
+ if (!IS_ERR_OR_NULL(arg)) {
+ memset(arg, 0, sizeof(*arg));
+ arg->cmd = OPTEE_MSG_CMD_CLOSE_SESSION;
+ arg->session = sess->session_id;
+ optee_do_call_with_arg(ctx, parg);
+ }
+ kfree(sess);
+ }
+ kfree(ctxdata);
+
+ if (!IS_ERR(shm))
+ tee_shm_free(shm);
+
+ ctx->data = NULL;
+
+ if (teedev == optee->supp_teedev) {
+ mutex_lock(&optee->supp.ctx_mutex);
+ optee->supp.ctx = NULL;
+ mutex_unlock(&optee->supp.ctx_mutex);
+ }
+}
+
+static struct tee_driver_ops optee_ops = {
+ .get_version = optee_get_version,
+ .open = optee_open,
+ .release = optee_release,
+ .open_session = optee_open_session,
+ .close_session = optee_close_session,
+ .invoke_func = optee_invoke_func,
+ .cancel_req = optee_cancel_req,
+};
+
+static struct tee_desc optee_desc = {
+ .name = DRIVER_NAME "-clnt",
+ .ops = &optee_ops,
+ .owner = THIS_MODULE,
+};
+
+static struct tee_driver_ops optee_supp_ops = {
+ .get_version = optee_get_version,
+ .open = optee_open,
+ .release = optee_release,
+ .supp_recv = optee_supp_recv,
+ .supp_send = optee_supp_send,
+};
+
+static struct tee_desc optee_supp_desc = {
+ .name = DRIVER_NAME "-supp",
+ .ops = &optee_supp_ops,
+ .owner = THIS_MODULE,
+ .flags = TEE_DESC_PRIVILEGED,
+};
+
+static bool optee_msg_api_uid_is_optee_api(optee_invoke_fn *invoke_fn)
+{
+ struct arm_smccc_res res;
+
+ invoke_fn(OPTEE_SMC_CALLS_UID, 0, 0, 0, 0, 0, 0, 0, &res);
+
+ if (res.a0 == OPTEE_MSG_UID_0 && res.a1 == OPTEE_MSG_UID_1 &&
+ res.a2 == OPTEE_MSG_UID_2 && res.a3 == OPTEE_MSG_UID_3)
+ return true;
+ return false;
+}
+
+static bool optee_msg_api_revision_is_compatible(optee_invoke_fn *invoke_fn)
+{
+ union {
+ struct arm_smccc_res smccc;
+ struct optee_smc_calls_revision_result result;
+ } res;
+
+ invoke_fn(OPTEE_SMC_CALLS_REVISION, 0, 0, 0, 0, 0, 0, 0, &res.smccc);
+
+ if (res.result.major == OPTEE_MSG_REVISION_MAJOR &&
+ (int)res.result.minor >= OPTEE_MSG_REVISION_MINOR)
+ return true;
+ return false;
+}
+
+static bool optee_msg_exchange_capabilities(optee_invoke_fn *invoke_fn,
+ u32 *sec_caps)
+{
+ union {
+ struct arm_smccc_res smccc;
+ struct optee_smc_exchange_capabilities_result result;
+ } res;
+ u32 a1 = 0;
+
+ /*
+ * TODO This isn't enough to tell if it's UP system (from kernel
+ * point of view) or not, is_smp() returns the the information
+ * needed, but can't be called directly from here.
+ */
+#ifndef CONFIG_SMP
+ a1 |= OPTEE_SMC_NSEC_CAP_UNIPROCESSOR;
+#endif
+
+ invoke_fn(OPTEE_SMC_EXCHANGE_CAPABILITIES, a1, 0, 0, 0, 0, 0, 0,
+ &res.smccc);
+
+ if (res.result.status != OPTEE_SMC_RETURN_OK)
+ return false;
+
+ *sec_caps = res.result.capabilities;
+ return true;
+}
+
+static struct tee_shm_pool *
+optee_config_shm_ioremap(struct device *dev, optee_invoke_fn *invoke_fn,
+ void __iomem **ioremaped_shm)
+{
+ union {
+ struct arm_smccc_res smccc;
+ struct optee_smc_get_shm_config_result result;
+ } res;
+ struct tee_shm_pool *pool;
+ unsigned long vaddr;
+ phys_addr_t paddr;
+ size_t size;
+ phys_addr_t begin;
+ phys_addr_t end;
+ void __iomem *va;
+ struct tee_shm_pool_mem_info priv_info;
+ struct tee_shm_pool_mem_info dmabuf_info;
+
+ invoke_fn(OPTEE_SMC_GET_SHM_CONFIG, 0, 0, 0, 0, 0, 0, 0, &res.smccc);
+ if (res.result.status != OPTEE_SMC_RETURN_OK) {
+ dev_info(dev, "shm service not available\n");
+ return ERR_PTR(-ENOENT);
+ }
+
+ if (res.result.settings != OPTEE_SMC_SHM_CACHED) {
+ dev_err(dev, "only normal cached shared memory supported\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ begin = roundup(res.result.start, PAGE_SIZE);
+ end = rounddown(res.result.start + res.result.size, PAGE_SIZE);
+ paddr = begin;
+ size = end - begin;
+
+ if (size < 2 * OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE) {
+ dev_err(dev, "too small shared memory area\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ va = ioremap_cache(paddr, size);
+ if (!va) {
+ dev_err(dev, "shared memory ioremap failed\n");
+ return ERR_PTR(-EINVAL);
+ }
+ vaddr = (unsigned long)va;
+
+ priv_info.vaddr = vaddr;
+ priv_info.paddr = paddr;
+ priv_info.size = OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE;
+ dmabuf_info.vaddr = vaddr + OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE;
+ dmabuf_info.paddr = paddr + OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE;
+ dmabuf_info.size = size - OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE;
+
+ pool = tee_shm_pool_alloc_res_mem(dev, &priv_info, &dmabuf_info);
+ if (IS_ERR(pool)) {
+ iounmap(va);
+ goto out;
+ }
+
+ *ioremaped_shm = va;
+out:
+ return pool;
+}
+
+static int get_invoke_func(struct device *dev, optee_invoke_fn **invoke_fn)
+{
+ struct device_node *np = dev->of_node;
+ const char *method;
+
+ dev_info(dev, "probing for conduit method from DT.\n");
+
+ if (of_property_read_string(np, "method", &method)) {
+ dev_warn(dev, "missing \"method\" property\n");
+ return -ENXIO;
+ }
+
+ if (!strcmp("hvc", method)) {
+ *invoke_fn = arm_smccc_hvc;
+ } else if (!strcmp("smc", method)) {
+ *invoke_fn = arm_smccc_smc;
+ } else {
+ dev_warn(dev, "invalid \"method\" property: %s\n", method);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int optee_probe(struct platform_device *pdev)
+{
+ optee_invoke_fn *invoke_fn;
+ struct tee_shm_pool *pool;
+ struct optee *optee = NULL;
+ void __iomem *ioremaped_shm = NULL;
+ struct tee_device *teedev;
+ u32 sec_caps;
+ int rc;
+
+ rc = get_invoke_func(&pdev->dev, &invoke_fn);
+ if (rc)
+ return rc;
+
+ if (!optee_msg_api_uid_is_optee_api(invoke_fn)) {
+ dev_warn(&pdev->dev, "api uid mismatch\n");
+ return -EINVAL;
+ }
+
+ if (!optee_msg_api_revision_is_compatible(invoke_fn)) {
+ dev_warn(&pdev->dev, "api revision mismatch\n");
+ return -EINVAL;
+ }
+
+ if (!optee_msg_exchange_capabilities(invoke_fn, &sec_caps)) {
+ dev_warn(&pdev->dev, "capabilities mismatch\n");
+ return -EINVAL;
+ }
+
+ /*
+ * We have no other option for shared memory, if secure world
+ * doesn't have any reserved memory we can use we can't continue.
+ */
+ if (!(sec_caps & OPTEE_SMC_SEC_CAP_HAVE_RESERVERED_SHM))
+ return -EINVAL;
+
+ pool = optee_config_shm_ioremap(&pdev->dev, invoke_fn, &ioremaped_shm);
+ if (IS_ERR(pool))
+ return PTR_ERR(pool);
+
+ optee = devm_kzalloc(&pdev->dev, sizeof(*optee), GFP_KERNEL);
+ if (!optee) {
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ optee->dev = &pdev->dev;
+ optee->invoke_fn = invoke_fn;
+
+ teedev = tee_device_alloc(&optee_desc, &pdev->dev, pool, optee);
+ if (IS_ERR(teedev)) {
+ rc = PTR_ERR(teedev);
+ goto err;
+ }
+ optee->teedev = teedev;
+
+ teedev = tee_device_alloc(&optee_supp_desc, &pdev->dev, pool, optee);
+ if (IS_ERR(teedev)) {
+ rc = PTR_ERR(teedev);
+ goto err;
+ }
+ optee->supp_teedev = teedev;
+
+ rc = tee_device_register(optee->teedev);
+ if (rc)
+ goto err;
+
+ rc = tee_device_register(optee->supp_teedev);
+ if (rc)
+ goto err;
+
+ mutex_init(&optee->call_queue.mutex);
+ INIT_LIST_HEAD(&optee->call_queue.waiters);
+ optee_wait_queue_init(&optee->wait_queue);
+ optee_supp_init(&optee->supp);
+ optee->ioremaped_shm = ioremaped_shm;
+ optee->pool = pool;
+
+ platform_set_drvdata(pdev, optee);
+
+ optee_enable_shm_cache(optee);
+
+ dev_info(&pdev->dev, "initialized driver\n");
+ return 0;
+err:
+ if (optee) {
+ /*
+ * tee_device_unregister() is safe to call even if the
+ * devices hasn't been registered with
+ * tee_device_register() yet.
+ */
+ tee_device_unregister(optee->supp_teedev);
+ tee_device_unregister(optee->teedev);
+ }
+ if (pool)
+ tee_shm_pool_free(pool);
+ if (ioremaped_shm)
+ iounmap(ioremaped_shm);
+ return rc;
+}
+
+static int optee_remove(struct platform_device *pdev)
+{
+ struct optee *optee = platform_get_drvdata(pdev);
+
+ /*
+ * Ask OP-TEE to free all cached shared memory objects to decrease
+ * reference counters and also avoid wild pointers in secure world
+ * into the old shared memory range.
+ */
+ optee_disable_shm_cache(optee);
+
+ /*
+ * The two devices has to be unregistered before we can free the
+ * other resources.
+ */
+ tee_device_unregister(optee->supp_teedev);
+ tee_device_unregister(optee->teedev);
+
+ tee_shm_pool_free(optee->pool);
+ if (optee->ioremaped_shm)
+ iounmap(optee->ioremaped_shm);
+ optee_wait_queue_exit(&optee->wait_queue);
+ optee_supp_uninit(&optee->supp);
+ mutex_destroy(&optee->call_queue.mutex);
+
+ return 0;
+}
+
+static const struct of_device_id optee_match[] = {
+ { .compatible = "linaro,optee-tz" },
+ {},
+};
+
+static struct platform_driver optee_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = optee_match,
+ },
+ .probe = optee_probe,
+ .remove = optee_remove,
+};
+
+static int __init optee_driver_init(void)
+{
+ struct device_node *node;
+
+ /*
+ * Preferred path is /firmware/optee, but it's the matching that
+ * matters.
+ */
+ for_each_matching_node(node, optee_match)
+ of_platform_device_create(node, NULL, NULL);
+
+ return platform_driver_register(&optee_driver);
+}
+module_init(optee_driver_init);
+
+static void __exit optee_driver_exit(void)
+{
+ platform_driver_unregister(&optee_driver);
+}
+module_exit(optee_driver_exit);
+
+MODULE_AUTHOR("Linaro");
+MODULE_DESCRIPTION("OP-TEE driver");
+MODULE_SUPPORTED_DEVICE("");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h
new file mode 100644
index 0000000..3c0a912
--- /dev/null
+++ b/drivers/tee/optee/optee_msg.h
@@ -0,0 +1,435 @@
+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _OPTEE_MSG_H
+#define _OPTEE_MSG_H
+
+#include <linux/bitops.h>
+#include <linux/types.h>
+
+/*
+ * This file defines the OP-TEE message protocol used to communicate
+ * with an instance of OP-TEE running in secure world.
+ *
+ * This file is divided into three sections.
+ * 1. Formatting of messages.
+ * 2. Requests from normal world
+ * 3. Requests from secure world, Remote Procedure Call (RPC), handled by
+ * tee-supplicant.
+ */
+
+/*****************************************************************************
+ * Part 1 - formatting of messages
+ *****************************************************************************/
+
+#define OPTEE_MSG_ATTR_TYPE_NONE 0x0
+#define OPTEE_MSG_ATTR_TYPE_VALUE_INPUT 0x1
+#define OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT 0x2
+#define OPTEE_MSG_ATTR_TYPE_VALUE_INOUT 0x3
+#define OPTEE_MSG_ATTR_TYPE_RMEM_INPUT 0x5
+#define OPTEE_MSG_ATTR_TYPE_RMEM_OUTPUT 0x6
+#define OPTEE_MSG_ATTR_TYPE_RMEM_INOUT 0x7
+#define OPTEE_MSG_ATTR_TYPE_TMEM_INPUT 0x9
+#define OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT 0xa
+#define OPTEE_MSG_ATTR_TYPE_TMEM_INOUT 0xb
+
+#define OPTEE_MSG_ATTR_TYPE_MASK GENMASK(7, 0)
+
+/*
+ * Meta parameter to be absorbed by the Secure OS and not passed
+ * to the Trusted Application.
+ *
+ * Currently only used with OPTEE_MSG_CMD_OPEN_SESSION.
+ */
+#define OPTEE_MSG_ATTR_META BIT(8)
+
+/*
+ * The temporary shared memory object is not physically contigous and this
+ * temp memref is followed by another fragment until the last temp memref
+ * that doesn't have this bit set.
+ */
+#define OPTEE_MSG_ATTR_FRAGMENT BIT(9)
+
+/*
+ * Memory attributes for caching passed with temp memrefs. The actual value
+ * used is defined outside the message protocol with the exception of
+ * OPTEE_MSG_ATTR_CACHE_PREDEFINED which means the attributes already
+ * defined for the memory range should be used. If optee_smc.h is used as
+ * bearer of this protocol OPTEE_SMC_SHM_* is used for values.
+ */
+#define OPTEE_MSG_ATTR_CACHE_SHIFT 16
+#define OPTEE_MSG_ATTR_CACHE_MASK GENMASK(2, 0)
+#define OPTEE_MSG_ATTR_CACHE_PREDEFINED 0
+
+/*
+ * Same values as TEE_LOGIN_* from TEE Internal API
+ */
+#define OPTEE_MSG_LOGIN_PUBLIC 0x00000000
+#define OPTEE_MSG_LOGIN_USER 0x00000001
+#define OPTEE_MSG_LOGIN_GROUP 0x00000002
+#define OPTEE_MSG_LOGIN_APPLICATION 0x00000004
+#define OPTEE_MSG_LOGIN_APPLICATION_USER 0x00000005
+#define OPTEE_MSG_LOGIN_APPLICATION_GROUP 0x00000006
+
+/**
+ * struct optee_msg_param_tmem - temporary memory reference parameter
+ * @buf_ptr: Address of the buffer
+ * @size: Size of the buffer
+ * @shm_ref: Temporary shared memory reference, pointer to a struct tee_shm
+ *
+ * Secure and normal world communicates pointers as physical address
+ * instead of the virtual address. This is because secure and normal world
+ * have completely independent memory mapping. Normal world can even have a
+ * hypervisor which need to translate the guest physical address (AKA IPA
+ * in ARM documentation) to a real physical address before passing the
+ * structure to secure world.
+ */
+struct optee_msg_param_tmem {
+ u64 buf_ptr;
+ u64 size;
+ u64 shm_ref;
+};
+
+/**
+ * struct optee_msg_param_rmem - registered memory reference parameter
+ * @offs: Offset into shared memory reference
+ * @size: Size of the buffer
+ * @shm_ref: Shared memory reference, pointer to a struct tee_shm
+ */
+struct optee_msg_param_rmem {
+ u64 offs;
+ u64 size;
+ u64 shm_ref;
+};
+
+/**
+ * struct optee_msg_param_value - opaque value parameter
+ *
+ * Value parameters are passed unchecked between normal and secure world.
+ */
+struct optee_msg_param_value {
+ u64 a;
+ u64 b;
+ u64 c;
+};
+
+/**
+ * struct optee_msg_param - parameter used together with struct optee_msg_arg
+ * @attr: attributes
+ * @tmem: parameter by temporary memory reference
+ * @rmem: parameter by registered memory reference
+ * @value: parameter by opaque value
+ *
+ * @attr & OPTEE_MSG_ATTR_TYPE_MASK indicates if tmem, rmem or value is used in
+ * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value,
+ * OPTEE_MSG_ATTR_TYPE_TMEM_* indicates tmem and
+ * OPTEE_MSG_ATTR_TYPE_RMEM_* indicates rmem.
+ * OPTEE_MSG_ATTR_TYPE_NONE indicates that none of the members are used.
+ */
+struct optee_msg_param {
+ u64 attr;
+ union {
+ struct optee_msg_param_tmem tmem;
+ struct optee_msg_param_rmem rmem;
+ struct optee_msg_param_value value;
+ } u;
+};
+
+/**
+ * struct optee_msg_arg - call argument
+ * @cmd: Command, one of OPTEE_MSG_CMD_* or OPTEE_MSG_RPC_CMD_*
+ * @func: Trusted Application function, specific to the Trusted Application,
+ * used if cmd == OPTEE_MSG_CMD_INVOKE_COMMAND
+ * @session: In parameter for all OPTEE_MSG_CMD_* except
+ * OPTEE_MSG_CMD_OPEN_SESSION where it's an output parameter instead
+ * @cancel_id: Cancellation id, a unique value to identify this request
+ * @ret: return value
+ * @ret_origin: origin of the return value
+ * @num_params: number of parameters supplied to the OS Command
+ * @params: the parameters supplied to the OS Command
+ *
+ * All normal calls to Trusted OS uses this struct. If cmd requires further
+ * information than what these field holds it can be passed as a parameter
+ * tagged as meta (setting the OPTEE_MSG_ATTR_META bit in corresponding
+ * attrs field). All parameters tagged as meta has to come first.
+ *
+ * Temp memref parameters can be fragmented if supported by the Trusted OS
+ * (when optee_smc.h is bearer of this protocol this is indicated with
+ * OPTEE_SMC_SEC_CAP_UNREGISTERED_SHM). If a logical memref parameter is
+ * fragmented then has all but the last fragment the
+ * OPTEE_MSG_ATTR_FRAGMENT bit set in attrs. Even if a memref is fragmented
+ * it will still be presented as a single logical memref to the Trusted
+ * Application.
+ */
+struct optee_msg_arg {
+ u32 cmd;
+ u32 func;
+ u32 session;
+ u32 cancel_id;
+ u32 pad;
+ u32 ret;
+ u32 ret_origin;
+ u32 num_params;
+
+ /*
+ * this struct is 8 byte aligned since the 'struct optee_msg_param'
+ * which follows requires 8 byte alignment.
+ *
+ * Commented out element used to visualize the layout dynamic part
+ * of the struct. This field is not available at all if
+ * num_params == 0.
+ *
+ * params is accessed through the macro OPTEE_MSG_GET_PARAMS
+ *
+ * struct optee_msg_param params[num_params];
+ */
+} __aligned(8);
+
+/**
+ * OPTEE_MSG_GET_PARAMS - return pointer to struct optee_msg_param *
+ *
+ * @x: Pointer to a struct optee_msg_arg
+ *
+ * Returns a pointer to the params[] inside a struct optee_msg_arg.
+ */
+#define OPTEE_MSG_GET_PARAMS(x) \
+ (struct optee_msg_param *)(((struct optee_msg_arg *)(x)) + 1)
+
+/**
+ * OPTEE_MSG_GET_ARG_SIZE - return size of struct optee_msg_arg
+ *
+ * @num_params: Number of parameters embedded in the struct optee_msg_arg
+ *
+ * Returns the size of the struct optee_msg_arg together with the number
+ * of embedded parameters.
+ */
+#define OPTEE_MSG_GET_ARG_SIZE(num_params) \
+ (sizeof(struct optee_msg_arg) + \
+ sizeof(struct optee_msg_param) * (num_params))
+
+/*****************************************************************************
+ * Part 2 - requests from normal world
+ *****************************************************************************/
+
+/*
+ * Return the following UID if using API specified in this file without
+ * further extensions:
+ * 384fb3e0-e7f8-11e3-af63-0002a5d5c51b.
+ * Represented in 4 32-bit words in OPTEE_MSG_UID_0, OPTEE_MSG_UID_1,
+ * OPTEE_MSG_UID_2, OPTEE_MSG_UID_3.
+ */
+#define OPTEE_MSG_UID_0 0x384fb3e0
+#define OPTEE_MSG_UID_1 0xe7f811e3
+#define OPTEE_MSG_UID_2 0xaf630002
+#define OPTEE_MSG_UID_3 0xa5d5c51b
+#define OPTEE_MSG_FUNCID_CALLS_UID 0xFF01
+
+/*
+ * Returns 2.0 if using API specified in this file without further
+ * extensions. Represented in 2 32-bit words in OPTEE_MSG_REVISION_MAJOR
+ * and OPTEE_MSG_REVISION_MINOR
+ */
+#define OPTEE_MSG_REVISION_MAJOR 2
+#define OPTEE_MSG_REVISION_MINOR 0
+#define OPTEE_MSG_FUNCID_CALLS_REVISION 0xFF03
+
+/*
+ * Get UUID of Trusted OS.
+ *
+ * Used by non-secure world to figure out which Trusted OS is installed.
+ * Note that returned UUID is the UUID of the Trusted OS, not of the API.
+ *
+ * Returns UUID in 4 32-bit words in the same way as
+ * OPTEE_MSG_FUNCID_CALLS_UID described above.
+ */
+#define OPTEE_MSG_OS_OPTEE_UUID_0 0x486178e0
+#define OPTEE_MSG_OS_OPTEE_UUID_1 0xe7f811e3
+#define OPTEE_MSG_OS_OPTEE_UUID_2 0xbc5e0002
+#define OPTEE_MSG_OS_OPTEE_UUID_3 0xa5d5c51b
+#define OPTEE_MSG_FUNCID_GET_OS_UUID 0x0000
+
+/*
+ * Get revision of Trusted OS.
+ *
+ * Used by non-secure world to figure out which version of the Trusted OS
+ * is installed. Note that the returned revision is the revision of the
+ * Trusted OS, not of the API.
+ *
+ * Returns revision in 2 32-bit words in the same way as
+ * OPTEE_MSG_CALLS_REVISION described above.
+ */
+#define OPTEE_MSG_OS_OPTEE_REVISION_MAJOR 1
+#define OPTEE_MSG_OS_OPTEE_REVISION_MINOR 0
+#define OPTEE_MSG_FUNCID_GET_OS_REVISION 0x0001
+
+/*
+ * Do a secure call with struct optee_msg_arg as argument
+ * The OPTEE_MSG_CMD_* below defines what goes in struct optee_msg_arg::cmd
+ *
+ * OPTEE_MSG_CMD_OPEN_SESSION opens a session to a Trusted Application.
+ * The first two parameters are tagged as meta, holding two value
+ * parameters to pass the following information:
+ * param[0].u.value.a-b uuid of Trusted Application
+ * param[1].u.value.a-b uuid of Client
+ * param[1].u.value.c Login class of client OPTEE_MSG_LOGIN_*
+ *
+ * OPTEE_MSG_CMD_INVOKE_COMMAND invokes a command a previously opened
+ * session to a Trusted Application. struct optee_msg_arg::func is Trusted
+ * Application function, specific to the Trusted Application.
+ *
+ * OPTEE_MSG_CMD_CLOSE_SESSION closes a previously opened session to
+ * Trusted Application.
+ *
+ * OPTEE_MSG_CMD_CANCEL cancels a currently invoked command.
+ *
+ * OPTEE_MSG_CMD_REGISTER_SHM registers a shared memory reference. The
+ * information is passed as:
+ * [in] param[0].attr OPTEE_MSG_ATTR_TYPE_TMEM_INPUT
+ * [| OPTEE_MSG_ATTR_FRAGMENT]
+ * [in] param[0].u.tmem.buf_ptr physical address (of first fragment)
+ * [in] param[0].u.tmem.size size (of first fragment)
+ * [in] param[0].u.tmem.shm_ref holds shared memory reference
+ * ...
+ * The shared memory can optionally be fragmented, temp memrefs can follow
+ * each other with all but the last with the OPTEE_MSG_ATTR_FRAGMENT bit set.
+ *
+ * OPTEE_MSG_CMD_UNREGISTER_SHM unregisteres a previously registered shared
+ * memory reference. The information is passed as:
+ * [in] param[0].attr OPTEE_MSG_ATTR_TYPE_RMEM_INPUT
+ * [in] param[0].u.rmem.shm_ref holds shared memory reference
+ * [in] param[0].u.rmem.offs 0
+ * [in] param[0].u.rmem.size 0
+ */
+#define OPTEE_MSG_CMD_OPEN_SESSION 0
+#define OPTEE_MSG_CMD_INVOKE_COMMAND 1
+#define OPTEE_MSG_CMD_CLOSE_SESSION 2
+#define OPTEE_MSG_CMD_CANCEL 3
+#define OPTEE_MSG_CMD_REGISTER_SHM 4
+#define OPTEE_MSG_CMD_UNREGISTER_SHM 5
+#define OPTEE_MSG_FUNCID_CALL_WITH_ARG 0x0004
+
+/*****************************************************************************
+ * Part 3 - Requests from secure world, RPC
+ *****************************************************************************/
+
+/*
+ * All RPC is done with a struct optee_msg_arg as bearer of information,
+ * struct optee_msg_arg::arg holds values defined by OPTEE_MSG_RPC_CMD_* below
+ *
+ * RPC communication with tee-supplicant is reversed compared to normal
+ * client communication desribed above. The supplicant receives requests
+ * and sends responses.
+ */
+
+/*
+ * Load a TA into memory, defined in tee-supplicant
+ */
+#define OPTEE_MSG_RPC_CMD_LOAD_TA 0
+
+/*
+ * Reserved
+ */
+#define OPTEE_MSG_RPC_CMD_RPMB 1
+
+/*
+ * File system access, defined in tee-supplicant
+ */
+#define OPTEE_MSG_RPC_CMD_FS 2
+
+/*
+ * Get time
+ *
+ * Returns number of seconds and nano seconds since the Epoch,
+ * 1970-01-01 00:00:00 +0000 (UTC).
+ *
+ * [out] param[0].u.value.a Number of seconds
+ * [out] param[0].u.value.b Number of nano seconds.
+ */
+#define OPTEE_MSG_RPC_CMD_GET_TIME 3
+
+/*
+ * Wait queue primitive, helper for secure world to implement a wait queue
+ *
+ * Waiting on a key
+ * [in] param[0].u.value.a OPTEE_MSG_RPC_WAIT_QUEUE_SLEEP
+ * [in] param[0].u.value.b wait key
+ *
+ * Waking up a key
+ * [in] param[0].u.value.a OPTEE_MSG_RPC_WAIT_QUEUE_WAKEUP
+ * [in] param[0].u.value.b wakeup key
+ */
+#define OPTEE_MSG_RPC_CMD_WAIT_QUEUE 4
+#define OPTEE_MSG_RPC_WAIT_QUEUE_SLEEP 0
+#define OPTEE_MSG_RPC_WAIT_QUEUE_WAKEUP 1
+
+/*
+ * Suspend execution
+ *
+ * [in] param[0].value .a number of milliseconds to suspend
+ */
+#define OPTEE_MSG_RPC_CMD_SUSPEND 5
+
+/*
+ * Allocate a piece of shared memory
+ *
+ * Shared memory can optionally be fragmented, to support that additional
+ * spare param entries are allocated to make room for eventual fragments.
+ * The spare param entries has .attr = OPTEE_MSG_ATTR_TYPE_NONE when
+ * unused. All returned temp memrefs except the last should have the
+ * OPTEE_MSG_ATTR_FRAGMENT bit set in the attr field.
+ *
+ * [in] param[0].u.value.a type of memory one of
+ * OPTEE_MSG_RPC_SHM_TYPE_* below
+ * [in] param[0].u.value.b requested size
+ * [in] param[0].u.value.c required alignment
+ *
+ * [out] param[0].u.tmem.buf_ptr physical address (of first fragment)
+ * [out] param[0].u.tmem.size size (of first fragment)
+ * [out] param[0].u.tmem.shm_ref shared memory reference
+ * ...
+ * [out] param[n].u.tmem.buf_ptr physical address
+ * [out] param[n].u.tmem.size size
+ * [out] param[n].u.tmem.shm_ref shared memory reference (same value
+ * as in param[n-1].u.tmem.shm_ref)
+ */
+#define OPTEE_MSG_RPC_CMD_SHM_ALLOC 6
+/* Memory that can be shared with a non-secure user space application */
+#define OPTEE_MSG_RPC_SHM_TYPE_APPL 0
+/* Memory only shared with non-secure kernel */
+#define OPTEE_MSG_RPC_SHM_TYPE_KERNEL 1
+
+/*
+ * Free shared memory previously allocated with OPTEE_MSG_RPC_CMD_SHM_ALLOC
+ *
+ * [in] param[0].u.value.a type of memory one of
+ * OPTEE_MSG_RPC_SHM_TYPE_* above
+ * [in] param[0].u.value.b value of shared memory reference
+ * returned in param[0].u.tmem.shm_ref
+ * above
+ */
+#define OPTEE_MSG_RPC_CMD_SHM_FREE 7
+
+#endif /* _OPTEE_MSG_H */
diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
new file mode 100644
index 0000000..807f74c
--- /dev/null
+++ b/drivers/tee/optee/optee_private.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef OPTEE_PRIVATE_H
+#define OPTEE_PRIVATE_H
+
+#include <linux/arm-smccc.h>
+#include <linux/semaphore.h>
+#include <linux/tee_drv.h>
+#include <linux/types.h>
+#include "optee_msg.h"
+
+#define OPTEE_MAX_ARG_SIZE 1024
+
+/* Some Global Platform error codes used in this driver */
+#define TEEC_SUCCESS 0x00000000
+#define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006
+#define TEEC_ERROR_COMMUNICATION 0xFFFF000E
+#define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C
+
+#define TEEC_ORIGIN_COMMS 0x00000002
+
+typedef void (optee_invoke_fn)(unsigned long, unsigned long, unsigned long,
+ unsigned long, unsigned long, unsigned long,
+ unsigned long, unsigned long,
+ struct arm_smccc_res *);
+
+struct optee_call_queue {
+ /* Serializes access to this struct */
+ struct mutex mutex;
+ struct list_head waiters;
+};
+
+struct optee_wait_queue {
+ /* Serializes access to this struct */
+ struct mutex mu;
+ struct list_head db;
+};
+
+/**
+ * struct optee_supp - supplicant synchronization struct
+ * @ctx the context of current connected supplicant.
+ * if !NULL the supplicant device is available for use,
+ * else busy
+ * @ctx_mutex: held while accessing @ctx
+ * @func: supplicant function id to call
+ * @ret: call return value
+ * @num_params: number of elements in @param
+ * @param: parameters for @func
+ * @req_posted: if true, a request has been posted to the supplicant
+ * @supp_next_send: if true, next step is for supplicant to send response
+ * @thrd_mutex: held by the thread doing a request to supplicant
+ * @supp_mutex: held by supplicant while operating on this struct
+ * @data_to_supp: supplicant is waiting on this for next request
+ * @data_from_supp: requesting thread is waiting on this to get the result
+ */
+struct optee_supp {
+ struct tee_context *ctx;
+ /* Serializes access of ctx */
+ struct mutex ctx_mutex;
+
+ u32 func;
+ u32 ret;
+ size_t num_params;
+ struct tee_param *param;
+
+ bool req_posted;
+ bool supp_next_send;
+ /* Serializes access to this struct for requesting thread */
+ struct mutex thrd_mutex;
+ /* Serializes access to this struct for supplicant threads */
+ struct mutex supp_mutex;
+ struct completion data_to_supp;
+ struct completion data_from_supp;
+};
+
+/**
+ * struct optee - main service struct
+ * @supp_teedev: supplicant device
+ * @teedev: client device
+ * @dev: probed device
+ * @invoke_fn: function to issue smc or hvc
+ * @call_queue: queue of threads waiting to call @invoke_fn
+ * @wait_queue: queue of threads from secure world waiting for a
+ * secure world sync object
+ * @supp: supplicant synchronization struct for RPC to supplicant
+ * @pool: shared memory pool
+ * @ioremaped_shm virtual address of memory in shared memory pool
+ */
+struct optee {
+ struct tee_device *supp_teedev;
+ struct tee_device *teedev;
+ struct device *dev;
+ optee_invoke_fn *invoke_fn;
+ struct optee_call_queue call_queue;
+ struct optee_wait_queue wait_queue;
+ struct optee_supp supp;
+ struct tee_shm_pool *pool;
+ void __iomem *ioremaped_shm;
+};
+
+struct optee_session {
+ struct list_head list_node;
+ u32 session_id;
+};
+
+struct optee_context_data {
+ /* Serializes access to this struct */
+ struct mutex mutex;
+ struct list_head sess_list;
+};
+
+struct optee_rpc_param {
+ u32 a0;
+ u32 a1;
+ u32 a2;
+ u32 a3;
+ u32 a4;
+ u32 a5;
+ u32 a6;
+ u32 a7;
+};
+
+void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param);
+
+void optee_wait_queue_init(struct optee_wait_queue *wq);
+void optee_wait_queue_exit(struct optee_wait_queue *wq);
+
+u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params,
+ struct tee_param *param);
+
+int optee_supp_read(struct tee_context *ctx, void __user *buf, size_t len);
+int optee_supp_write(struct tee_context *ctx, void __user *buf, size_t len);
+void optee_supp_init(struct optee_supp *supp);
+void optee_supp_uninit(struct optee_supp *supp);
+
+int optee_supp_recv(struct tee_context *ctx, u32 *func, u32 *num_params,
+ struct tee_param *param);
+int optee_supp_send(struct tee_context *ctx, u32 ret, u32 num_params,
+ struct tee_param *param);
+
+u32 optee_do_call_with_arg(struct tee_context *ctx, phys_addr_t parg);
+int optee_open_session(struct tee_context *ctx,
+ struct tee_ioctl_open_session_arg *arg,
+ struct tee_param *param);
+int optee_close_session(struct tee_context *ctx, u32 session);
+int optee_invoke_func(struct tee_context *ctx, struct tee_ioctl_invoke_arg *arg,
+ struct tee_param *param);
+int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session);
+
+void optee_enable_shm_cache(struct optee *optee);
+void optee_disable_shm_cache(struct optee *optee);
+
+int optee_from_msg_param(struct tee_param *params, size_t num_params,
+ const struct optee_msg_param *msg_params);
+int optee_to_msg_param(struct optee_msg_param *msg_params, size_t num_params,
+ const struct tee_param *params);
+
+/*
+ * Small helpers
+ */
+
+static inline void *reg_pair_to_ptr(u32 reg0, u32 reg1)
+{
+ return (void *)(unsigned long)(((u64)reg0 << 32) | reg1);
+}
+
+static inline void reg_pair_from_64(u32 *reg0, u32 *reg1, u64 val)
+{
+ *reg0 = val >> 32;
+ *reg1 = val;
+}
+
+#endif /*OPTEE_PRIVATE_H*/
diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h
new file mode 100644
index 0000000..ff98cb7
--- /dev/null
+++ b/drivers/tee/optee/optee_smc.h
@@ -0,0 +1,446 @@
+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef OPTEE_SMC_H
+#define OPTEE_SMC_H
+
+#include <linux/arm-smccc.h>
+#include <linux/bitops.h>
+
+#define OPTEE_SMC_STD_CALL_VAL(func_num) \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_32, \
+ ARM_SMCCC_OWNER_TRUSTED_OS, (func_num))
+#define OPTEE_SMC_FAST_CALL_VAL(func_num) \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_32, \
+ ARM_SMCCC_OWNER_TRUSTED_OS, (func_num))
+
+/*
+ * Function specified by SMC Calling convention.
+ */
+#define OPTEE_SMC_FUNCID_CALLS_COUNT 0xFF00
+#define OPTEE_SMC_CALLS_COUNT \
+ ARM_SMCCC_CALL_VAL(OPTEE_SMC_FAST_CALL, SMCCC_SMC_32, \
+ SMCCC_OWNER_TRUSTED_OS_END, \
+ OPTEE_SMC_FUNCID_CALLS_COUNT)
+
+/*
+ * Normal cached memory (write-back), shareable for SMP systems and not
+ * shareable for UP systems.
+ */
+#define OPTEE_SMC_SHM_CACHED 1
+
+/*
+ * a0..a7 is used as register names in the descriptions below, on arm32
+ * that translates to r0..r7 and on arm64 to w0..w7. In both cases it's
+ * 32-bit registers.
+ */
+
+/*
+ * Function specified by SMC Calling convention
+ *
+ * Return one of the following UIDs if using API specified in this file
+ * without further extentions:
+ * 65cb6b93-af0c-4617-8ed6-644a8d1140f8
+ * see also OPTEE_SMC_UID_* in optee_msg.h
+ */
+#define OPTEE_SMC_FUNCID_CALLS_UID OPTEE_MSG_FUNCID_CALLS_UID
+#define OPTEE_SMC_CALLS_UID \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_32, \
+ ARM_SMCCC_OWNER_TRUSTED_OS_END, \
+ OPTEE_SMC_FUNCID_CALLS_UID)
+
+/*
+ * Function specified by SMC Calling convention
+ *
+ * Returns 2.0 if using API specified in this file without further extentions.
+ * see also OPTEE_MSG_REVISION_* in optee_msg.h
+ */
+#define OPTEE_SMC_FUNCID_CALLS_REVISION OPTEE_MSG_FUNCID_CALLS_REVISION
+#define OPTEE_SMC_CALLS_REVISION \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_32, \
+ ARM_SMCCC_OWNER_TRUSTED_OS_END, \
+ OPTEE_SMC_FUNCID_CALLS_REVISION)
+
+struct optee_smc_calls_revision_result {
+ unsigned long major;
+ unsigned long minor;
+ unsigned long reserved0;
+ unsigned long reserved1;
+};
+
+/*
+ * Get UUID of Trusted OS.
+ *
+ * Used by non-secure world to figure out which Trusted OS is installed.
+ * Note that returned UUID is the UUID of the Trusted OS, not of the API.
+ *
+ * Returns UUID in a0-4 in the same way as OPTEE_SMC_CALLS_UID
+ * described above.
+ */
+#define OPTEE_SMC_FUNCID_GET_OS_UUID OPTEE_MSG_FUNCID_GET_OS_UUID
+#define OPTEE_SMC_CALL_GET_OS_UUID \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_OS_UUID)
+
+/*
+ * Get revision of Trusted OS.
+ *
+ * Used by non-secure world to figure out which version of the Trusted OS
+ * is installed. Note that the returned revision is the revision of the
+ * Trusted OS, not of the API.
+ *
+ * Returns revision in a0-1 in the same way as OPTEE_SMC_CALLS_REVISION
+ * described above.
+ */
+#define OPTEE_SMC_FUNCID_GET_OS_REVISION OPTEE_MSG_FUNCID_GET_OS_REVISION
+#define OPTEE_SMC_CALL_GET_OS_REVISION \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_OS_REVISION)
+
+/*
+ * Call with struct optee_msg_arg as argument
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC*CALL_WITH_ARG
+ * a1 Upper 32bit of a 64bit physical pointer to a struct optee_msg_arg
+ * a2 Lower 32bit of a 64bit physical pointer to a struct optee_msg_arg
+ * a3 Cache settings, not used if physical pointer is in a predefined shared
+ * memory area else per OPTEE_SMC_SHM_*
+ * a4-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 Return value, OPTEE_SMC_RETURN_*
+ * a1-3 Not used
+ * a4-7 Preserved
+ *
+ * OPTEE_SMC_RETURN_ETHREAD_LIMIT return register usage:
+ * a0 Return value, OPTEE_SMC_RETURN_ETHREAD_LIMIT
+ * a1-3 Preserved
+ * a4-7 Preserved
+ *
+ * RPC return register usage:
+ * a0 Return value, OPTEE_SMC_RETURN_IS_RPC(val)
+ * a1-2 RPC parameters
+ * a3-7 Resume information, must be preserved
+ *
+ * Possible return values:
+ * OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Trusted OS does not recognize this
+ * function.
+ * OPTEE_SMC_RETURN_OK Call completed, result updated in
+ * the previously supplied struct
+ * optee_msg_arg.
+ * OPTEE_SMC_RETURN_ETHREAD_LIMIT Number of Trusted OS threads exceeded,
+ * try again later.
+ * OPTEE_SMC_RETURN_EBADADDR Bad physcial pointer to struct
+ * optee_msg_arg.
+ * OPTEE_SMC_RETURN_EBADCMD Bad/unknown cmd in struct optee_msg_arg
+ * OPTEE_SMC_RETURN_IS_RPC() Call suspended by RPC call to normal
+ * world.
+ */
+#define OPTEE_SMC_FUNCID_CALL_WITH_ARG OPTEE_MSG_FUNCID_CALL_WITH_ARG
+#define OPTEE_SMC_CALL_WITH_ARG \
+ OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_CALL_WITH_ARG)
+
+/*
+ * Get Shared Memory Config
+ *
+ * Returns the Secure/Non-secure shared memory config.
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_GET_SHM_CONFIG
+ * a1-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Have config return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1 Physical address of start of SHM
+ * a2 Size of of SHM
+ * a3 Cache settings of memory, as defined by the
+ * OPTEE_SMC_SHM_* values above
+ * a4-7 Preserved
+ *
+ * Not available register usage:
+ * a0 OPTEE_SMC_RETURN_ENOTAVAIL
+ * a1-3 Not used
+ * a4-7 Preserved
+ */
+#define OPTEE_SMC_FUNCID_GET_SHM_CONFIG 7
+#define OPTEE_SMC_GET_SHM_CONFIG \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_SHM_CONFIG)
+
+struct optee_smc_get_shm_config_result {
+ unsigned long status;
+ unsigned long start;
+ unsigned long size;
+ unsigned long settings;
+};
+
+/*
+ * Exchanges capabilities between normal world and secure world
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_EXCHANGE_CAPABILITIES
+ * a1 bitfield of normal world capabilities OPTEE_SMC_NSEC_CAP_*
+ * a2-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1 bitfield of secure world capabilities OPTEE_SMC_SEC_CAP_*
+ * a2-7 Preserved
+ *
+ * Error return register usage:
+ * a0 OPTEE_SMC_RETURN_ENOTAVAIL, can't use the capabilities from normal world
+ * a1 bitfield of secure world capabilities OPTEE_SMC_SEC_CAP_*
+ * a2-7 Preserved
+ */
+/* Normal world works as a uniprocessor system */
+#define OPTEE_SMC_NSEC_CAP_UNIPROCESSOR BIT(0)
+/* Secure world has reserved shared memory for normal world to use */
+#define OPTEE_SMC_SEC_CAP_HAVE_RESERVERED_SHM BIT(0)
+/* Secure world can communicate via previously unregistered shared memory */
+#define OPTEE_SMC_SEC_CAP_UNREGISTERED_SHM BIT(1)
+#define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES 9
+#define OPTEE_SMC_EXCHANGE_CAPABILITIES \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES)
+
+struct optee_smc_exchange_capabilities_result {
+ unsigned long status;
+ unsigned long capabilities;
+ unsigned long reserved0;
+ unsigned long reserved1;
+};
+
+/*
+ * Disable and empties cache of shared memory objects
+ *
+ * Secure world can cache frequently used shared memory objects, for
+ * example objects used as RPC arguments. When secure world is idle this
+ * function returns one shared memory reference to free. To disable the
+ * cache and free all cached objects this function has to be called until
+ * it returns OPTEE_SMC_RETURN_ENOTAVAIL.
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_DISABLE_SHM_CACHE
+ * a1-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1 Upper 32bit of a 64bit Shared memory cookie
+ * a2 Lower 32bit of a 64bit Shared memory cookie
+ * a3-7 Preserved
+ *
+ * Cache empty return register usage:
+ * a0 OPTEE_SMC_RETURN_ENOTAVAIL
+ * a1-7 Preserved
+ *
+ * Not idle return register usage:
+ * a0 OPTEE_SMC_RETURN_EBUSY
+ * a1-7 Preserved
+ */
+#define OPTEE_SMC_FUNCID_DISABLE_SHM_CACHE 10
+#define OPTEE_SMC_DISABLE_SHM_CACHE \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_DISABLE_SHM_CACHE)
+
+struct optee_smc_disable_shm_cache_result {
+ unsigned long status;
+ unsigned long shm_upper32;
+ unsigned long shm_lower32;
+ unsigned long reserved0;
+};
+
+/*
+ * Enable cache of shared memory objects
+ *
+ * Secure world can cache frequently used shared memory objects, for
+ * example objects used as RPC arguments. When secure world is idle this
+ * function returns OPTEE_SMC_RETURN_OK and the cache is enabled. If
+ * secure world isn't idle OPTEE_SMC_RETURN_EBUSY is returned.
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_ENABLE_SHM_CACHE
+ * a1-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1-7 Preserved
+ *
+ * Not idle return register usage:
+ * a0 OPTEE_SMC_RETURN_EBUSY
+ * a1-7 Preserved
+ */
+#define OPTEE_SMC_FUNCID_ENABLE_SHM_CACHE 11
+#define OPTEE_SMC_ENABLE_SHM_CACHE \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_ENABLE_SHM_CACHE)
+
+/*
+ * Resume from RPC (for example after processing an IRQ)
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC
+ * a1-3 Value of a1-3 when OPTEE_SMC_CALL_WITH_ARG returned
+ * OPTEE_SMC_RETURN_RPC in a0
+ *
+ * Return register usage is the same as for OPTEE_SMC_*CALL_WITH_ARG above.
+ *
+ * Possible return values
+ * OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Trusted OS does not recognize this
+ * function.
+ * OPTEE_SMC_RETURN_OK Original call completed, result
+ * updated in the previously supplied.
+ * struct optee_msg_arg
+ * OPTEE_SMC_RETURN_RPC Call suspended by RPC call to normal
+ * world.
+ * OPTEE_SMC_RETURN_ERESUME Resume failed, the opaque resume
+ * information was corrupt.
+ */
+#define OPTEE_SMC_FUNCID_RETURN_FROM_RPC 3
+#define OPTEE_SMC_CALL_RETURN_FROM_RPC \
+ OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_RETURN_FROM_RPC)
+
+#define OPTEE_SMC_RETURN_RPC_PREFIX_MASK 0xFFFF0000
+#define OPTEE_SMC_RETURN_RPC_PREFIX 0xFFFF0000
+#define OPTEE_SMC_RETURN_RPC_FUNC_MASK 0x0000FFFF
+
+#define OPTEE_SMC_RETURN_GET_RPC_FUNC(ret) \
+ ((ret) & OPTEE_SMC_RETURN_RPC_FUNC_MASK)
+
+#define OPTEE_SMC_RPC_VAL(func) ((func) | OPTEE_SMC_RETURN_RPC_PREFIX)
+
+/*
+ * Allocate memory for RPC parameter passing. The memory is used to hold a
+ * struct optee_msg_arg.
+ *
+ * "Call" register usage:
+ * a0 This value, OPTEE_SMC_RETURN_RPC_ALLOC
+ * a1 Size in bytes of required argument memory
+ * a2 Not used
+ * a3 Resume information, must be preserved
+ * a4-5 Not used
+ * a6-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1 Upper 32bits of 64bit physical pointer to allocated
+ * memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can't
+ * be allocated.
+ * a2 Lower 32bits of 64bit physical pointer to allocated
+ * memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can't
+ * be allocated
+ * a3 Preserved
+ * a4 Upper 32bits of 64bit Shared memory cookie used when freeing
+ * the memory or doing an RPC
+ * a5 Lower 32bits of 64bit Shared memory cookie used when freeing
+ * the memory or doing an RPC
+ * a6-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_ALLOC 0
+#define OPTEE_SMC_RETURN_RPC_ALLOC \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_ALLOC)
+
+/*
+ * Free memory previously allocated by OPTEE_SMC_RETURN_RPC_ALLOC
+ *
+ * "Call" register usage:
+ * a0 This value, OPTEE_SMC_RETURN_RPC_FREE
+ * a1 Upper 32bits of 64bit shared memory cookie belonging to this
+ * argument memory
+ * a2 Lower 32bits of 64bit shared memory cookie belonging to this
+ * argument memory
+ * a3-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1-2 Not used
+ * a3-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_FREE 2
+#define OPTEE_SMC_RETURN_RPC_FREE \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_FREE)
+
+/*
+ * Deliver an IRQ in normal world.
+ *
+ * "Call" register usage:
+ * a0 OPTEE_SMC_RETURN_RPC_IRQ
+ * a1-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_IRQ 4
+#define OPTEE_SMC_RETURN_RPC_IRQ \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_IRQ)
+
+/*
+ * Do an RPC request. The supplied struct optee_msg_arg tells which
+ * request to do and the parameters for the request. The following fields
+ * are used (the rest are unused):
+ * - cmd the Request ID
+ * - ret return value of the request, filled in by normal world
+ * - num_params number of parameters for the request
+ * - params the parameters
+ * - param_attrs attributes of the parameters
+ *
+ * "Call" register usage:
+ * a0 OPTEE_SMC_RETURN_RPC_CMD
+ * a1 Upper 32bit of a 64bit Shared memory cookie holding a
+ * struct optee_msg_arg, must be preserved, only the data should
+ * be updated
+ * a2 Lower 32bit of a 64bit Shared memory cookie holding a
+ * struct optee_msg_arg, must be preserved, only the data should
+ * be updated
+ * a3-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1-2 Not used
+ * a3-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_CMD 5
+#define OPTEE_SMC_RETURN_RPC_CMD \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_CMD)
+
+/* Returned in a0 */
+#define OPTEE_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF
+
+/* Returned in a0 only from Trusted OS functions */
+#define OPTEE_SMC_RETURN_OK 0x0
+#define OPTEE_SMC_RETURN_ETHREAD_LIMIT 0x1
+#define OPTEE_SMC_RETURN_EBUSY 0x2
+#define OPTEE_SMC_RETURN_ERESUME 0x3
+#define OPTEE_SMC_RETURN_EBADADDR 0x4
+#define OPTEE_SMC_RETURN_EBADCMD 0x5
+#define OPTEE_SMC_RETURN_ENOMEM 0x6
+#define OPTEE_SMC_RETURN_ENOTAVAIL 0x7
+#define OPTEE_SMC_RETURN_IS_RPC(ret) \
+ (((ret) != OPTEE_SMC_RETURN_UNKNOWN_FUNCTION) && \
+ ((((ret) & OPTEE_SMC_RETURN_RPC_PREFIX_MASK) == \
+ OPTEE_SMC_RETURN_RPC_PREFIX)))
+
+#endif /* OPTEE_SMC_H */
diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c
new file mode 100644
index 0000000..0b9c1a2
--- /dev/null
+++ b/drivers/tee/optee/rpc.c
@@ -0,0 +1,404 @@
+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include "optee_private.h"
+#include "optee_smc.h"
+
+struct wq_entry {
+ struct list_head link;
+ struct completion c;
+ u32 key;
+};
+
+void optee_wait_queue_init(struct optee_wait_queue *priv)
+{
+ mutex_init(&priv->mu);
+ INIT_LIST_HEAD(&priv->db);
+}
+
+void optee_wait_queue_exit(struct optee_wait_queue *priv)
+{
+ mutex_destroy(&priv->mu);
+}
+
+static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg)
+{
+ struct optee_msg_param *params;
+ struct timespec64 ts;
+
+ if (arg->num_params != 1)
+ goto bad;
+ params = OPTEE_MSG_GET_PARAMS(arg);
+ if ((params->attr & OPTEE_MSG_ATTR_TYPE_MASK) !=
+ OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT)
+ goto bad;
+
+ getnstimeofday64(&ts);
+ params->u.value.a = ts.tv_sec;
+ params->u.value.b = ts.tv_nsec;
+
+ arg->ret = TEEC_SUCCESS;
+ return;
+bad:
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+
+static struct wq_entry *wq_entry_get(struct optee_wait_queue *wq, u32 key)
+{
+ struct wq_entry *w;
+
+ mutex_lock(&wq->mu);
+
+ list_for_each_entry(w, &wq->db, link)
+ if (w->key == key)
+ goto out;
+
+ w = kmalloc(sizeof(*w), GFP_KERNEL);
+ if (w) {
+ init_completion(&w->c);
+ w->key = key;
+ list_add_tail(&w->link, &wq->db);
+ }
+out:
+ mutex_unlock(&wq->mu);
+ return w;
+}
+
+static void wq_sleep(struct optee_wait_queue *wq, u32 key)
+{
+ struct wq_entry *w = wq_entry_get(wq, key);
+
+ if (w) {
+ wait_for_completion(&w->c);
+ mutex_lock(&wq->mu);
+ list_del(&w->link);
+ mutex_unlock(&wq->mu);
+ kfree(w);
+ }
+}
+
+static void wq_wakeup(struct optee_wait_queue *wq, u32 key)
+{
+ struct wq_entry *w = wq_entry_get(wq, key);
+
+ if (w)
+ complete(&w->c);
+}
+
+static void handle_rpc_func_cmd_wq(struct optee *optee,
+ struct optee_msg_arg *arg)
+{
+ struct optee_msg_param *params;
+
+ if (arg->num_params != 1)
+ goto bad;
+
+ params = OPTEE_MSG_GET_PARAMS(arg);
+ if ((params->attr & OPTEE_MSG_ATTR_TYPE_MASK) !=
+ OPTEE_MSG_ATTR_TYPE_VALUE_INPUT)
+ goto bad;
+
+ switch (params->u.value.a) {
+ case OPTEE_MSG_RPC_WAIT_QUEUE_SLEEP:
+ wq_sleep(&optee->wait_queue, params->u.value.b);
+ break;
+ case OPTEE_MSG_RPC_WAIT_QUEUE_WAKEUP:
+ wq_wakeup(&optee->wait_queue, params->u.value.b);
+ break;
+ default:
+ goto bad;
+ }
+
+ arg->ret = TEEC_SUCCESS;
+ return;
+bad:
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+
+static void handle_rpc_func_cmd_wait(struct optee_msg_arg *arg)
+{
+ struct optee_msg_param *params;
+ u32 msec_to_wait;
+
+ if (arg->num_params != 1)
+ goto bad;
+
+ params = OPTEE_MSG_GET_PARAMS(arg);
+ if ((params->attr & OPTEE_MSG_ATTR_TYPE_MASK) !=
+ OPTEE_MSG_ATTR_TYPE_VALUE_INPUT)
+ goto bad;
+
+ msec_to_wait = params->u.value.a;
+
+ /* set task's state to interruptible sleep */
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ /* take a nap */
+ schedule_timeout(msecs_to_jiffies(msec_to_wait));
+
+ arg->ret = TEEC_SUCCESS;
+ return;
+bad:
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+
+static void handle_rpc_supp_cmd(struct tee_context *ctx,
+ struct optee_msg_arg *arg)
+{
+ struct tee_param *params;
+ struct optee_msg_param *msg_params = OPTEE_MSG_GET_PARAMS(arg);
+
+ arg->ret_origin = TEEC_ORIGIN_COMMS;
+
+ params = kmalloc_array(arg->num_params, sizeof(struct tee_param),
+ GFP_KERNEL);
+ if (!params) {
+ arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
+ return;
+ }
+
+ if (optee_from_msg_param(params, arg->num_params, msg_params)) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ goto out;
+ }
+
+ arg->ret = optee_supp_thrd_req(ctx, arg->cmd, arg->num_params, params);
+
+ if (optee_to_msg_param(msg_params, arg->num_params, params))
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+out:
+ kfree(params);
+}
+
+static struct tee_shm *cmd_alloc_suppl(struct tee_context *ctx, size_t sz)
+{
+ u32 ret;
+ struct tee_param param;
+ struct optee *optee = tee_get_drvdata(ctx->teedev);
+ struct tee_shm *shm;
+
+ param.attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
+ param.u.value.a = OPTEE_MSG_RPC_SHM_TYPE_APPL;
+ param.u.value.b = sz;
+ param.u.value.c = 0;
+
+ ret = optee_supp_thrd_req(ctx, OPTEE_MSG_RPC_CMD_SHM_ALLOC, 1, ¶m);
+ if (ret)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_lock(&optee->supp.ctx_mutex);
+ /* Increases count as secure world doesn't have a reference */
+ shm = tee_shm_get_from_id(optee->supp.ctx, param.u.value.c);
+ mutex_unlock(&optee->supp.ctx_mutex);
+ return shm;
+}
+
+static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
+ struct optee_msg_arg *arg)
+{
+ struct optee_msg_param *params = OPTEE_MSG_GET_PARAMS(arg);
+ phys_addr_t pa;
+ struct tee_shm *shm;
+ size_t sz;
+ size_t n;
+
+ arg->ret_origin = TEEC_ORIGIN_COMMS;
+
+ if (!arg->num_params ||
+ params->attr != OPTEE_MSG_ATTR_TYPE_VALUE_INPUT) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ for (n = 1; n < arg->num_params; n++) {
+ if (params[n].attr != OPTEE_MSG_ATTR_TYPE_NONE) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+ }
+
+ sz = params->u.value.b;
+ switch (params->u.value.a) {
+ case OPTEE_MSG_RPC_SHM_TYPE_APPL:
+ shm = cmd_alloc_suppl(ctx, sz);
+ break;
+ case OPTEE_MSG_RPC_SHM_TYPE_KERNEL:
+ shm = tee_shm_alloc(ctx, sz, TEE_SHM_MAPPED);
+ break;
+ default:
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ if (IS_ERR(shm)) {
+ arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
+ return;
+ }
+
+ if (tee_shm_get_pa(shm, 0, &pa)) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ goto bad;
+ }
+
+ params[0].attr = OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT;
+ params[0].u.tmem.buf_ptr = pa;
+ params[0].u.tmem.size = sz;
+ params[0].u.tmem.shm_ref = (unsigned long)shm;
+ arg->ret = TEEC_SUCCESS;
+ return;
+bad:
+ tee_shm_free(shm);
+}
+
+static void cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm)
+{
+ struct tee_param param;
+
+ param.attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
+ param.u.value.a = OPTEE_MSG_RPC_SHM_TYPE_APPL;
+ param.u.value.b = tee_shm_get_id(shm);
+ param.u.value.c = 0;
+
+ /*
+ * Match the tee_shm_get_from_id() in cmd_alloc_suppl() as secure
+ * world has released its reference.
+ *
+ * It's better to do this before sending the request to supplicant
+ * as we'd like to let the process doing the initial allocation to
+ * do release the last reference too in order to avoid stacking
+ * many pending fput() on the client process. This could otherwise
+ * happen if secure world does many allocate and free in a single
+ * invoke.
+ */
+ tee_shm_put(shm);
+
+ optee_supp_thrd_req(ctx, OPTEE_MSG_RPC_CMD_SHM_FREE, 1, ¶m);
+}
+
+static void handle_rpc_func_cmd_shm_free(struct tee_context *ctx,
+ struct optee_msg_arg *arg)
+{
+ struct optee_msg_param *params = OPTEE_MSG_GET_PARAMS(arg);
+ struct tee_shm *shm;
+
+ arg->ret_origin = TEEC_ORIGIN_COMMS;
+
+ if (arg->num_params != 1 ||
+ params->attr != OPTEE_MSG_ATTR_TYPE_VALUE_INPUT) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ shm = (struct tee_shm *)(unsigned long)params->u.value.b;
+ switch (params->u.value.a) {
+ case OPTEE_MSG_RPC_SHM_TYPE_APPL:
+ cmd_free_suppl(ctx, shm);
+ break;
+ case OPTEE_MSG_RPC_SHM_TYPE_KERNEL:
+ tee_shm_free(shm);
+ break;
+ default:
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ }
+ arg->ret = TEEC_SUCCESS;
+}
+
+static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee,
+ struct tee_shm *shm)
+{
+ struct optee_msg_arg *arg;
+
+ arg = tee_shm_get_va(shm, 0);
+ if (IS_ERR(arg)) {
+ dev_err(optee->dev, "%s: tee_shm_get_va %p failed\n",
+ __func__, shm);
+ return;
+ }
+
+ switch (arg->cmd) {
+ case OPTEE_MSG_RPC_CMD_GET_TIME:
+ handle_rpc_func_cmd_get_time(arg);
+ break;
+ case OPTEE_MSG_RPC_CMD_WAIT_QUEUE:
+ handle_rpc_func_cmd_wq(optee, arg);
+ break;
+ case OPTEE_MSG_RPC_CMD_SUSPEND:
+ handle_rpc_func_cmd_wait(arg);
+ break;
+ case OPTEE_MSG_RPC_CMD_SHM_ALLOC:
+ handle_rpc_func_cmd_shm_alloc(ctx, arg);
+ break;
+ case OPTEE_MSG_RPC_CMD_SHM_FREE:
+ handle_rpc_func_cmd_shm_free(ctx, arg);
+ break;
+ default:
+ handle_rpc_supp_cmd(ctx, arg);
+ }
+}
+
+/**
+ * optee_handle_rpc() - handle RPC from secure world
+ * @ctx: context doing the RPC
+ * @param: value of registers for the RPC
+ *
+ * Result of RPC is written back into @param.
+ */
+void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param)
+{
+ struct tee_device *teedev = ctx->teedev;
+ struct optee *optee = tee_get_drvdata(teedev);
+ struct tee_shm *shm;
+ phys_addr_t pa;
+
+ switch (OPTEE_SMC_RETURN_GET_RPC_FUNC(param->a0)) {
+ case OPTEE_SMC_RPC_FUNC_ALLOC:
+ shm = tee_shm_alloc(ctx, param->a1, TEE_SHM_MAPPED);
+ if (!IS_ERR(shm) && !tee_shm_get_pa(shm, 0, &pa)) {
+ reg_pair_from_64(¶m->a1, ¶m->a2, pa);
+ reg_pair_from_64(¶m->a4, ¶m->a5,
+ (unsigned long)shm);
+ } else {
+ param->a1 = 0;
+ param->a2 = 0;
+ param->a4 = 0;
+ param->a5 = 0;
+ }
+ break;
+ case OPTEE_SMC_RPC_FUNC_FREE:
+ shm = reg_pair_to_ptr(param->a1, param->a2);
+ tee_shm_free(shm);
+ break;
+ case OPTEE_SMC_RPC_FUNC_IRQ:
+ /*
+ * An IRQ was raised while secure world was executing,
+ * since all IRQs are handled in Linux a dummy RPC is
+ * performed to let Linux take the IRQ through the normal
+ * vector.
+ */
+ break;
+ case OPTEE_SMC_RPC_FUNC_CMD:
+ shm = reg_pair_to_ptr(param->a1, param->a2);
+ handle_rpc_func_cmd(ctx, optee, shm);
+ break;
+ default:
+ dev_warn(optee->dev, "Unknown RPC func 0x%x\n",
+ (u32)OPTEE_SMC_RETURN_GET_RPC_FUNC(param->a0));
+ break;
+ }
+
+ param->a0 = OPTEE_SMC_CALL_RETURN_FROM_RPC;
+}
diff --git a/drivers/tee/optee/supp.c b/drivers/tee/optee/supp.c
new file mode 100644
index 0000000..b4ea067
--- /dev/null
+++ b/drivers/tee/optee/supp.c
@@ -0,0 +1,273 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include "optee_private.h"
+
+void optee_supp_init(struct optee_supp *supp)
+{
+ memset(supp, 0, sizeof(*supp));
+ mutex_init(&supp->ctx_mutex);
+ mutex_init(&supp->thrd_mutex);
+ mutex_init(&supp->supp_mutex);
+ init_completion(&supp->data_to_supp);
+ init_completion(&supp->data_from_supp);
+}
+
+void optee_supp_uninit(struct optee_supp *supp)
+{
+ mutex_destroy(&supp->ctx_mutex);
+ mutex_destroy(&supp->thrd_mutex);
+ mutex_destroy(&supp->supp_mutex);
+}
+
+/**
+ * optee_supp_thrd_req() - request service from supplicant
+ * @ctx: context doing the request
+ * @func: function requested
+ * @num_params: number of elements in @param array
+ * @param: parameters for function
+ *
+ * Returns result of operation to be passed to secure world
+ */
+u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params,
+ struct tee_param *param)
+{
+ bool interruptable;
+ struct optee *optee = tee_get_drvdata(ctx->teedev);
+ struct optee_supp *supp = &optee->supp;
+ u32 ret;
+
+ /*
+ * Other threads blocks here until we've copied our answer from
+ * supplicant.
+ */
+ while (mutex_lock_interruptible(&supp->thrd_mutex)) {
+ /* See comment below on when the RPC can be interrupted. */
+ mutex_lock(&supp->ctx_mutex);
+ interruptable = !supp->ctx;
+ mutex_unlock(&supp->ctx_mutex);
+ if (interruptable)
+ return TEEC_ERROR_COMMUNICATION;
+ }
+
+ /*
+ * We have exclusive access now since the supplicant at this
+ * point is either doing a
+ * wait_for_completion_interruptible(&supp->data_to_supp) or is in
+ * userspace still about to do the ioctl() to enter
+ * optee_supp_recv() below.
+ */
+
+ supp->func = func;
+ supp->num_params = num_params;
+ supp->param = param;
+ supp->req_posted = true;
+
+ /* Let supplicant get the data */
+ complete(&supp->data_to_supp);
+
+ /*
+ * Wait for supplicant to process and return result, once we've
+ * returned from wait_for_completion(data_from_supp) we have
+ * exclusive access again.
+ */
+ while (wait_for_completion_interruptible(&supp->data_from_supp)) {
+ mutex_lock(&supp->ctx_mutex);
+ interruptable = !supp->ctx;
+ if (interruptable) {
+ /*
+ * There's no supplicant available and since the
+ * supp->ctx_mutex currently is held none can
+ * become available until the mutex released
+ * again.
+ *
+ * Interrupting an RPC to supplicant is only
+ * allowed as a way of slightly improving the user
+ * experience in case the supplicant hasn't been
+ * started yet. During normal operation the supplicant
+ * will serve all requests in a timely manner and
+ * interrupting then wouldn't make sense.
+ */
+ supp->ret = TEEC_ERROR_COMMUNICATION;
+ init_completion(&supp->data_to_supp);
+ }
+ mutex_unlock(&supp->ctx_mutex);
+ if (interruptable)
+ break;
+ }
+
+ ret = supp->ret;
+ supp->param = NULL;
+ supp->req_posted = false;
+
+ /* We're done, let someone else talk to the supplicant now. */
+ mutex_unlock(&supp->thrd_mutex);
+
+ return ret;
+}
+
+/**
+ * optee_supp_recv() - receive request for supplicant
+ * @ctx: context receiving the request
+ * @func: requested function in supplicant
+ * @num_params: number of elements allocated in @param, updated with number
+ * used elements
+ * @param: space for parameters for @func
+ *
+ * Returns 0 on success or <0 on failure
+ */
+int optee_supp_recv(struct tee_context *ctx, u32 *func, u32 *num_params,
+ struct tee_param *param)
+{
+ struct tee_device *teedev = ctx->teedev;
+ struct optee *optee = tee_get_drvdata(teedev);
+ struct optee_supp *supp = &optee->supp;
+ int rc;
+
+ /*
+ * In case two threads in one supplicant is calling this function
+ * simultaneously we need to protect the data with a mutex which
+ * we'll release before returning.
+ */
+ mutex_lock(&supp->supp_mutex);
+
+ if (supp->supp_next_send) {
+ /*
+ * optee_supp_recv() has been called again without
+ * a optee_supp_send() in between. Supplicant has
+ * probably been restarted before it was able to
+ * write back last result. Abort last request and
+ * wait for a new.
+ */
+ if (supp->req_posted) {
+ supp->ret = TEEC_ERROR_COMMUNICATION;
+ supp->supp_next_send = false;
+ complete(&supp->data_from_supp);
+ }
+ }
+
+ /*
+ * This is where supplicant will be hanging most of the
+ * time, let's make this interruptable so we can easily
+ * restart supplicant if needed.
+ */
+ if (wait_for_completion_interruptible(&supp->data_to_supp)) {
+ rc = -ERESTARTSYS;
+ goto out;
+ }
+
+ /* We have exlusive access to the data */
+
+ if (*num_params < supp->num_params) {
+ /*
+ * Not enough room for parameters, tell supplicant
+ * it failed and abort last request.
+ */
+ supp->ret = TEEC_ERROR_COMMUNICATION;
+ rc = -EINVAL;
+ complete(&supp->data_from_supp);
+ goto out;
+ }
+
+ *func = supp->func;
+ *num_params = supp->num_params;
+ memcpy(param, supp->param,
+ sizeof(struct tee_param) * supp->num_params);
+
+ /* Allow optee_supp_send() below to do its work */
+ supp->supp_next_send = true;
+
+ rc = 0;
+out:
+ mutex_unlock(&supp->supp_mutex);
+ return rc;
+}
+
+/**
+ * optee_supp_send() - send result of request from supplicant
+ * @ctx: context sending result
+ * @ret: return value of request
+ * @num_params: number of parameters returned
+ * @param: returned parameters
+ *
+ * Returns 0 on success or <0 on failure.
+ */
+int optee_supp_send(struct tee_context *ctx, u32 ret, u32 num_params,
+ struct tee_param *param)
+{
+ struct tee_device *teedev = ctx->teedev;
+ struct optee *optee = tee_get_drvdata(teedev);
+ struct optee_supp *supp = &optee->supp;
+ size_t n;
+ int rc = 0;
+
+ /*
+ * We still have exclusive access to the data since that's how we
+ * left it when returning from optee_supp_read().
+ */
+
+ /* See comment on mutex in optee_supp_read() above */
+ mutex_lock(&supp->supp_mutex);
+
+ if (!supp->supp_next_send) {
+ /*
+ * Something strange is going on, supplicant shouldn't
+ * enter optee_supp_send() in this state
+ */
+ rc = -ENOENT;
+ goto out;
+ }
+
+ if (num_params != supp->num_params) {
+ /*
+ * Something is wrong, let supplicant restart. Next call to
+ * optee_supp_recv() will give an error to the requesting
+ * thread and release it.
+ */
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Update out and in/out parameters */
+ for (n = 0; n < num_params; n++) {
+ struct tee_param *p = supp->param + n;
+
+ switch (p->attr) {
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT:
+ p->u.value.a = param[n].u.value.a;
+ p->u.value.b = param[n].u.value.b;
+ p->u.value.c = param[n].u.value.c;
+ break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT:
+ p->u.memref.size = param[n].u.memref.size;
+ break;
+ default:
+ break;
+ }
+ }
+ supp->ret = ret;
+
+ /* Allow optee_supp_recv() above to do its work */
+ supp->supp_next_send = false;
+
+ /* Let the requesting thread continue */
+ complete(&supp->data_from_supp);
+out:
+ mutex_unlock(&supp->supp_mutex);
+ return rc;
+}
--
1.9.1
^ permalink raw reply related
* [PATCH v12 4/4] Documentation: tee subsystem and op-tee driver
From: Jens Wiklander @ 2016-09-16 11:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1474024167-23253-1-git-send-email-jens.wiklander@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
---
Documentation/00-INDEX | 2 +
Documentation/tee.txt | 118 +++++++++++++++++++++++++++++++++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 121 insertions(+)
create mode 100644 Documentation/tee.txt
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index cb9a6c6..8216831 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -435,6 +435,8 @@ sysrq.txt
- info on the magic SysRq key.
target/
- directory with info on generating TCM v4 fabric .ko modules
+tee.txt
+ - info on the TEE subsystem and drivers
this_cpu_ops.txt
- List rationale behind and the way to use this_cpu operations.
thermal/
diff --git a/Documentation/tee.txt b/Documentation/tee.txt
new file mode 100644
index 0000000..7185993
--- /dev/null
+++ b/Documentation/tee.txt
@@ -0,0 +1,118 @@
+TEE subsystem
+This document describes the TEE subsystem in Linux.
+
+A TEE (Trusted Execution Environment) is a trusted OS running in some
+secure environment, for example, TrustZone on ARM CPUs, or a separate
+secure co-processor etc. A TEE driver handles the details needed to
+communicate with the TEE.
+
+This subsystem deals with:
+
+- Registration of TEE drivers
+
+- Managing shared memory between Linux and the TEE
+
+- Providing a generic API to the TEE
+
+The TEE interface
+=================
+
+include/uapi/linux/tee.h defines the generic interface to a TEE.
+
+User space (the client) connects to the driver by opening /dev/tee[0-9]* or
+/dev/teepriv[0-9]*.
+
+- TEE_IOC_SHM_ALLOC allocates shared memory and returns a file descriptor
+ which user space can mmap. When user space doesn't need the file
+ descriptor any more, it should be closed. When shared memory isn't needed
+ any longer it should be unmapped with munmap() to allow the reuse of
+ memory.
+
+- TEE_IOC_VERSION lets user space know which TEE this driver handles and
+ the its capabilities.
+
+- TEE_IOC_OPEN_SESSION opens a new session to a Trusted Application.
+
+- TEE_IOC_INVOKE invokes a function in a Trusted Application.
+
+- TEE_IOC_CANCEL may cancel an ongoing TEE_IOC_OPEN_SESSION or TEE_IOC_INVOKE.
+
+- TEE_IOC_CLOSE_SESSION closes a session to a Trusted Application.
+
+There are two classes of clients, normal clients and supplicants. The latter is
+a helper process for the TEE to access resources in Linux, for example file
+system access. A normal client opens /dev/tee[0-9]* and a supplicant opens
+/dev/teepriv[0-9].
+
+Much of the communication between clients and the TEE is opaque to the
+driver. The main job for the driver is to receive requests from the
+clients, forward them to the TEE and send back the results. In the case of
+supplicants the communication goes in the other direction, the TEE sends
+requests to the supplicant which then sends back the result.
+
+OP-TEE driver
+=============
+
+The OP-TEE driver handles OP-TEE [1] based TEEs. Currently it is only the ARM
+TrustZone based OP-TEE solution that is supported.
+
+Lowest level of communication with OP-TEE builds on ARM SMC Calling
+Convention (SMCCC) [2], which is the foundation for OP-TEE's SMC interface
+[3] used internally by the driver. Stacked on top of that is OP-TEE Message
+Protocol [4].
+
+OP-TEE SMC interface provides the basic functions required by SMCCC and some
+additional functions specific for OP-TEE. The most interesting functions are:
+
+- OPTEE_SMC_FUNCID_CALLS_UID (part of SMCCC) returns the version information
+ which is then returned by TEE_IOC_VERSION
+
+- OPTEE_SMC_CALL_GET_OS_UUID returns the particular OP-TEE implementation, used
+ to tell, for instance, a TrustZone OP-TEE apart from an OP-TEE running on a
+ separate secure co-processor.
+
+- OPTEE_SMC_CALL_WITH_ARG drives the OP-TEE message protocol
+
+- OPTEE_SMC_GET_SHM_CONFIG lets the driver and OP-TEE agree on which memory
+ range to used for shared memory between Linux and OP-TEE.
+
+The GlobalPlatform TEE Client API [5] is implemented on top of the generic
+TEE API.
+
+Picture of the relationship between the different components in the
+OP-TEE architecture.
+
+ User space Kernel Secure world
+ ~~~~~~~~~~ ~~~~~~ ~~~~~~~~~~~~
+ +--------+ +-------------+
+ | Client | | Trusted |
+ +--------+ | Application |
+ /\ +-------------+
+ || +----------+ /\
+ || |tee- | ||
+ || |supplicant| \/
+ || +----------+ +-------------+
+ \/ /\ | TEE Internal|
+ +-------+ || | API |
+ + TEE | || +--------+--------+ +-------------+
+ | Client| || | TEE | OP-TEE | | OP-TEE |
+ | API | \/ | subsys | driver | | Trusted OS |
+ +-------+----------------+----+-------+----+-----------+-------------+
+ | Generic TEE API | | OP-TEE MSG |
+ | IOCTL (TEE_IOC_*) | | SMCCC (OPTEE_SMC_CALL_*) |
+ +-----------------------------+ +------------------------------+
+
+RPC (Remote Procedure Call) are requests from secure world to kernel driver
+or tee-supplicant. An RPC is identified by a special range of SMCCC return
+values from OPTEE_SMC_CALL_WITH_ARG. RPC messages which are intended for the
+kernel are handled by the kernel driver. Other RPC messages will be forwarded to
+tee-supplicant without further involvement of the driver, except switching
+shared memory buffer representation.
+
+References:
+[1] https://github.com/OP-TEE/optee_os
+[2] http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html
+[3] drivers/tee/optee/optee_smc.h
+[4] drivers/tee/optee/optee_msg.h
+[5] http://www.globalplatform.org/specificationsdevice.asp look for
+ "TEE Client API Specification v1.0" and click download.
diff --git a/MAINTAINERS b/MAINTAINERS
index 089b4ee..ac39fe5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10342,6 +10342,7 @@ S: Maintained
F: include/linux/tee_drv.h
F: include/uapi/linux/tee.h
F: drivers/tee/
+F: Documentation/tee.txt
THUNDERBOLT DRIVER
M: Andreas Noever <andreas.noever@gmail.com>
--
1.9.1
^ permalink raw reply related
* [PATCH v2 1/7] clocksource: exynos_mct: Add the support for ARM64
From: Krzysztof Kozlowski @ 2016-09-16 11:10 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <562e232f-7e69-6d54-e49d-36042d166800@linaro.org>
On 09/08/2016 01:04 PM, Daniel Lezcano wrote:
> On 24/08/2016 15:49, Chanwoo Choi wrote:
>> This patch adds the support for ARM 64bit. The delay_timer is only supported
>> on ARM 32bit.
>>
>> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
>> Cc: Thomas Gleixner <tglx@linutronix.de>
>> Cc: Kukjin Kim <kgene@kernel.org>
>> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> ---
>
> I don't really like #ifdef in the code itself but I suppose there is no
> much choice.
>
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Thanks, applied.
If needed, I can provide a stable tag to base on top of it.
Best regards,
Krzysztof
^ permalink raw reply
* [PATCH] of/platform: Initialise dev->fwnode appropriately
From: Lorenzo Pieralisi @ 2016-09-16 11:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20160915133657.GB14424@rob-hp-laptop>
On Thu, Sep 15, 2016 at 08:36:57AM -0500, Rob Herring wrote:
> On Wed, Sep 14, 2016 at 04:01:24PM +0100, Robin Murphy wrote:
> > Whilst we're some of the way towards a universal firmware property
> > interface, drivers which deal with both OF and ACPI probing end up
> > having to do things like this:
> >
> > dev->of_node ? &dev->of_node->fwnode : dev->fwnode
> >
> > This seems unnecessary, when the OF code could instead simply fill in
> > the device's fwnode when binding the of_node, and let the drivers use
> > dev->fwnode either way. Let's give it a go and see what falls out.
> >
> > Signed-off-by: Robin Murphy <robin.murphy@arm.com>
> > ---
> > drivers/of/platform.c | 2 ++
> > 1 file changed, 2 insertions(+)
>
> I've applied this, but what about non-platform devices such as i2c?
Thanks ! Patch below should do for mfd and i2c (to be confirmed) but
I am pretty certain it is still missing some devices, are we going
to convert them on a case-by-case policy (ie when/if needed) ?
Lorenzo
-- >8 --
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index da3a02e..667a393 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -1574,6 +1574,7 @@ static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
info.addr = addr;
info.of_node = of_node_get(node);
+ info.fwnode = &node->fwnode;
info.archdata = &dev_ad;
if (of_get_property(node, "wakeup-source", NULL))
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 3ac486a..c264bf5 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -179,6 +179,7 @@ static int mfd_add_device(struct device *parent, int id,
for_each_child_of_node(parent->of_node, np) {
if (of_device_is_compatible(np, cell->of_compatible)) {
pdev->dev.of_node = np;
+ pdev->dev.fwnode = &np->fwnode;
break;
}
}
^ permalink raw reply related
* [PATCH v2] dmaengine: s3c24xx: Add dma_slave_map for s3c2440 devices
From: Krzysztof Kozlowski @ 2016-09-16 11:16 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1473968506-4150-1-git-send-email-sam.van.den.berge@telenet.be>
On 09/15/2016 09:41 PM, Sam Van Den Berge wrote:
> This patch updates the s3c24xx dma driver to be able to pass a
> dma_slave_map array via the platform data. This is needed to
> be able to use the new, simpler dmaengine API [1].
> I used the virtual DMA channels as a parameter for the dma_filter
> function. By doing that, I could reuse the existing filter function in
> drivers/dma/s3c24xx-dma.c.
>
> I have tested this on my mini2440 board with the audio driver.
> (I first applied the audio fixes from Sylwester Nawrocki [2])
> According to my observations, dma_request_slave_channel in the
> function dmaengine_pcm_new in the file
> sound/soc/soc-generic-dmaengine-pcm.c now returns a valid DMA channel
> whereas before no DMA channel was returned at that point.
>
> Entries for DMACH_XD0, DMACH_XD1 and DMACH_TIMER are missing because I
> don't realy know which driver to use for these.
>
> [1]
> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-December/393635.html
> [2] http://www.spinics.net/lists/arm-kernel/msg521918.html
>
> Signed-off-by: Sam Van Den Berge <sam.van.den.berge@telenet.be>
> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
>
> ---
>
> Changes since v1:
> - rename arm into dmaengine in title
> - one channel for s3c2440-sdi named "rx-tx"
>
> arch/arm/mach-s3c24xx/common.c | 35 +++++++++++++++++++++++++++++++
> drivers/dma/s3c24xx-dma.c | 3 +++
> include/linux/platform_data/dma-s3c24xx.h | 6 ++++++
> 3 files changed, 44 insertions(+)
Vinod, do you want to take it through your tree? Not much difference for
me, so in such case:
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
^ permalink raw reply
* [PATCH v2] ARM: dts: exynos: Add entries for sound support on Odroid-XU board
From: Sylwester Nawrocki @ 2016-09-16 11:22 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds device nodes for the AUDSS clock controller,
peripheral DMA 0/1 controllers and the Audio Subsystem I2S controller.
These entries are required for sound support on Odroid-XU board.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
This patch depends on a patch adding clock ID macro definitions.
I'm going to provide a topic branch containing required changes.
Changes since v1:
- GIC_SPI, IRQ_TYPE_NONE used in the PDMA and max98080 interrupt
specifiers,
- assigned-clock-* properties moved to respective controller
nodes.
---
arch/arm/boot/dts/exynos5410-odroidxu.dts | 69 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 9 ++++
arch/arm/boot/dts/exynos5410.dtsi | 59 ++++++++++++++++++++++++++
3 files changed, 137 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index d949931..8a70d18 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -15,6 +15,7 @@
#include <dt-bindings/clock/maxim,max77802.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/samsung-i2s.h>
#include "exynos54xx-odroidxu-leds.dtsi"
/ {
@@ -56,6 +57,61 @@
compatible = "samsung,secure-firmware";
reg = <0x02073000 0x1000>;
};
+
+ sound: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "Odroid-XU";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Speakers", "Speakers";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "Headphone Jack", "MICBIAS",
+ "IN1", "Headphone Jack",
+ "Speakers", "SPKL",
+ "Speakers", "SPKR";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&link0_codec>;
+ simple-audio-card,frame-master = <&link0_codec>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&audi2s0 0>;
+ system-clock-frequency = <19200000>;
+ };
+
+ link0_codec: simple-audio-card,codec {
+ sound-dai = <&max98090>;
+ clocks = <&audi2s0 CLK_I2S_CDCLK>;
+ };
+ };
+};
+
+&audi2s0 {
+ status = "okay";
+};
+
+&clock {
+ clocks = <&fin_pll>;
+ assigned-clocks = <&clock CLK_FOUT_EPLL>;
+ assigned-clock-rates = <192000000>;
+};
+
+&clock_audss {
+ assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+ <&clock_audss EXYNOS_MOUT_I2S>,
+ <&clock_audss EXYNOS_DOUT_SRP>,
+ <&clock_audss EXYNOS_DOUT_AUD_BUS>;
+
+ assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+ <&clock_audss EXYNOS_MOUT_AUDSS>;
+
+ assigned-clock-rates = <0>,
+ <0>,
+ <96000000>,
+ <19200000>;
};
&cpu0_thermal {
@@ -439,6 +495,19 @@
};
};
+&i2c_1 {
+ status = "okay";
+ max98090: max98090 at 10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpj3>;
+ interrupts = <0 IRQ_TYPE_NONE>;
+ clocks = <&audi2s0 CLK_I2S_CDCLK>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ };
+};
+
&mmc_0 {
status = "okay";
mmc-pwrseq = <&emmc_pwrseq>;
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index b58a0f2..31f08a3 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -613,4 +613,13 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ audi2s0_bus: audi2s0-bus {
+ samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+ "gpz-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 137f484..9a91685 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -16,6 +16,7 @@
#include "exynos54xx.dtsi"
#include "exynos-syscon-restart.dtsi"
#include <dt-bindings/clock/exynos5410.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
@@ -82,6 +83,14 @@
#clock-cells = <1>;
};
+ clock_audss: audss-clock-controller at 3810000 {
+ compatible = "samsung,exynos5410-audss-clock";
+ reg = <0x03810000 0x0C>;
+ #clock-cells = <1>;
+ clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>;
+ clock-names = "pll_ref", "pll_in";
+ };
+
tmu_cpu0: tmu at 10060000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10060000 0x100>;
@@ -183,6 +192,56 @@
reg = <0x03860000 0x1000>;
interrupts = <0 47 0>;
};
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ pdma0: pdma at 12680000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121A0000 0x1000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>;
+ clocks = <&clock CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ pdma1: pdma at 12690000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121B0000 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
+ clocks = <&clock CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+ };
+
+ audi2s0: i2s at 03830000 {
+ compatible = "samsung,exynos5420-i2s";
+ reg = <0x03830000 0x100>;
+ dmas = <&pdma0 10
+ &pdma0 9
+ &pdma0 8>;
+ dma-names = "tx", "rx", "tx-sec";
+ clocks = <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_SCLK_I2S>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+ #clock-cells = <1>;
+ clock-output-names = "i2s_cdclk0";
+ #sound-dai-cells = <1>;
+ samsung,idma-addr = <0x03000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&audi2s0_bus>;
+ status = "disabled";
+ };
};
thermal-zones {
--
1.9.1
^ permalink raw reply related
* [PATCH v2] ARM: dts: exynos: Add entries for sound support on Odroid-XU board
From: Sylwester Nawrocki @ 2016-09-16 11:25 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1474024920-32744-1-git-send-email-s.nawrocki@samsung.com>
On 09/16/2016 01:22 PM, Sylwester Nawrocki wrote:
> This patch adds device nodes for the AUDSS clock controller,
> peripheral DMA 0/1 controllers and the Audio Subsystem I2S controller.
> These entries are required for sound support on Odroid-XU board.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> This patch depends on a patch adding clock ID macro definitions.
> I'm going to provide a topic branch containing required changes.
>
> Changes since v1:
> - GIC_SPI, IRQ_TYPE_NONE used in the PDMA and max98080 interrupt
> specifiers,
> - assigned-clock-* properties moved to respective controller
> nodes.
And here is a pull request containing clk dependency patches:
The following changes since commit 29b4817d4018df78086157ea3a55c1d9424a7cfc:
Linux 4.8-rc1 (2016-08-07 18:18:00 -0700)
are available in the git repository at:
git://linuxtv.org/snawrocki/samsung.git tags/clk-v4.9-exynos54x0-dt
for you to fetch changes up to 58d6506f327e3d192998ba03632f546da221b8d8:
clk: samsung: exynos5410: Add clock IDs for PDMA and EPLL clocks (2016-09-09
10:13:02 +0200)
----------------------------------------------------------------
Adition of clock index definitions for exynos5420 SoC DRAM controller
and exynos5410 SoC sound subsystem (EPLL, PDMA) related clocks.
----------------------------------------------------------------
Chanwoo Choi (1):
clk: samsung: Add clock IDs for the CMU_CDREX (DRAM Express Controller)
Sylwester Nawrocki (1):
clk: samsung: exynos5410: Add clock IDs for PDMA and EPLL clocks
include/dt-bindings/clock/exynos5410.h | 3 +++
include/dt-bindings/clock/exynos5420.h | 11 ++++++++++-
2 files changed, 13 insertions(+), 1 deletion(-)
--
Thanks,
Sylwester
^ permalink raw reply
* [PATCH v3 5/7] arm64: Handle faults caused by inadvertent user access with PAN enabled
From: Mark Rutland @ 2016-09-16 11:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1473788797-10879-6-git-send-email-catalin.marinas@arm.com>
On Tue, Sep 13, 2016 at 06:46:35PM +0100, Catalin Marinas wrote:
> When TTBR0_EL1 is set to the reserved page, an erroneous kernel access
> to user space would generate a translation fault. This patch adds the
> checks for the software-set PSR_PAN_BIT to emulate a permission fault
> and report it accordingly.
Why do we need to treat this case as a permission fault? It looks like a
fault that wasn't a deliberate uaccess (which thus doesn't have a fixup
handler) should have do_page_fault call __do_kernel_fault, where we
should die().
Is this just for more consistent reporting of erroneous accesses to user
memory? Or does this fix some other issue?
> This patch also updates the description of the synchronous external
> aborts on translation table walks.
This sounds fine, though it might be better as a separate/preparatory
patch.
> -static inline bool is_permission_fault(unsigned int esr)
> +static inline bool is_permission_fault(unsigned int esr, struct pt_regs *regs)
> {
> unsigned int ec = ESR_ELx_EC(esr);
> unsigned int fsc_type = esr & ESR_ELx_FSC_TYPE;
>
> - return (ec == ESR_ELx_EC_DABT_CUR && fsc_type == ESR_ELx_FSC_PERM) ||
> - (ec == ESR_ELx_EC_IABT_CUR && fsc_type == ESR_ELx_FSC_PERM);
> + if (ec != ESR_ELx_EC_DABT_CUR && ec != ESR_ELx_EC_IABT_CUR)
> + return false;
> +
> + if (system_uses_ttbr0_pan())
> + return fsc_type == ESR_ELx_FSC_FAULT &&
> + (regs->pstate & PSR_PAN_BIT);
> + else
> + return fsc_type == ESR_ELx_FSC_PERM;
> }
Since the entry code will clear the PAN bit in the SPSR when we see the
reserved ASID, faults in EFI runtime services will still be correctly
reported, though that's somewhat subtle (and it took me a while to
convince myself that was the case).
Also, I think that faults elsewhere may be misreported, e.g. in cold
entry to kernel paths (idle, hotplug) where we have a global mapping in
TTBR0, and it looks like we're using the reserved ASID.
I'm not immediately sure how to distinguish those cases.
Thanks,
Mark.
^ permalink raw reply
* [PATCH v7 0/5] mfd: tps65218: Clean ups
From: Keerthy @ 2016-09-16 11:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1470833641-29546-1-git-send-email-j-keerthy@ti.com>
On Wednesday 10 August 2016 06:24 PM, Keerthy wrote:
> The series cleans up mainly the regulator driver and implements
> the device tree parsing using the regulator framework. Removes
> all the redundant compatibles for the individual regulators.
> Adds platform_device_id table for the gpio and power button modules.
>
> One of the patch removes redundant read wrapper and makes
> use of regmap_read wherever necessary.
Mark,
Should i repost this series? I do not see this series in linux-next yet.
Regards,
Keerthy
>
> The series is checked for all the regulator registrations on
> am437x-gp-evm.
>
> Boot log: http://pastebin.ubuntu.com/22905402/
>
> The series is based on linux-next on top of series titled:
> [PATCH v3 0/2] regulator: Enable suspend configuration
>
> Do not have the link of the above series available at the moment.
>
> Changes in v7:
>
> Rebasing to latest next branch. GPIO patch of this series
> pushed to linux-next by Linus. Hence posting the remaining
> patches with respective Acks from the domain Maintainers.
>
> Changes in v6:
>
> Rebased regulator/mfd clean up patches against linux-next +
> https://lkml.org/lkml/2016/6/24/122 series.
>
> Changes in v5:
>
> Rebased regulator clean up patch against linux-next.
>
> Changes in v4:
>
> For gpio-tps65218 reatined the compatible table.
> Fixed missing ';' in the power button patch.
> Fixed comments on the Documentation patch.
> Split the Device Tree patches to a separate series.
>
> Changes in v3:
>
> Missed making corresponding changes in the power button and gpio
> drivers. Added couple of patches to fix them to use mfd_cell way
> of parsing.
>
> Keerthy (5):
> mfd: tps65218: Remove redundant read wrapper
> Documentation: regulator: tps65218: Update examples
> input: tps65218-pwrbutton: Add platform_device_id table
> mfd: tps65218: Use mfd_add_devices instead of of_platform_populate
> regulator: tps65218: Remove all the compatibles
>
> .../devicetree/bindings/regulator/tps65218.txt | 87 +++++++++---
> drivers/gpio/gpio-tps65218.c | 3 +-
> drivers/input/misc/tps65218-pwrbutton.c | 10 +-
> drivers/mfd/tps65218.c | 34 ++---
> drivers/regulator/tps65218-regulator.c | 153 ++++++++-------------
> include/linux/mfd/tps65218.h | 3 +-
> 6 files changed, 158 insertions(+), 132 deletions(-)
>
^ permalink raw reply
* [PATCH v2 00/10] pinctrl: exynos/samsung: Add header with values used for configuration
From: Krzysztof Kozlowski @ 2016-09-16 11:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CACRpkdZuRym=SuAiBA_UsNmKd7N5n9g=z=ZxwcEk7J0BcXDsFw@mail.gmail.com>
On 09/07/2016 10:20 PM, Linus Walleij wrote:
> I have one comment though, if you're anyway making changes to all
> the DTS files:
>
> On Thu, Sep 1, 2016 at 9:23 AM, Krzysztof Kozlowski
> <k.kozlowski@samsung.com> wrote:
>
>> - samsung,pin-function = <2>;
>> - samsung,pin-pud = <0>;
>> - samsung,pin-drv = <0>;
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>
> Nowadays we have standard bindings for this, see
> Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
>
> Section "Generic pin multiplexing node content".
>
> By patching the driver and bindings to accept also the standard
> bindings with just function and pins and also adding support
> for standard pin configurations like bias-disable
> bias-pull-up with the old samsung,* bindings as a fallback
> etc you can actually modernize the whole binding and
> DTS looks to something simpler.
>
> You will find that this is how newer platforms do it.
>
> But it is admittedly a bigger project.
Indeed it would be nice to support generic bindings. Almost certainly I
won't have time for implementing this but it looks like a good task for
newcomers.
Best regards,
Krzysztof
^ permalink raw reply
* [PATCH v2 1/3] ipmi: add an Aspeed BT IPMI BMC driver
From: Arnd Bergmann @ 2016-09-16 11:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1474022367-21029-2-git-send-email-clg@kaod.org>
On Friday, September 16, 2016 12:39:25 PM CEST C?dric Le Goater wrote:
> From: Alistair Popple <alistair@popple.id.au>
>
> This patch adds a simple device driver to expose the iBT interface on
> Aspeed SOCs (AST2400 and AST2500) as a character device. Such SOCs are
> commonly used as BMCs (BaseBoard Management Controllers) and this
> driver implements the BMC side of the BT interface.
>
> The BT (Block Transfer) interface is used to perform in-band IPMI
> communication between a host and its BMC. Entire messages are buffered
> before sending a notification to the other end, host or BMC, that
> there is data to be read. Usually, the host emits requests and the BMC
> responses but the specification provides a mean for the BMC to send
> SMS Attention (BMC-to-Host attention or System Management Software
> attention) messages.
>
> For this purpose, the driver introduces a specific ioctl on the
> device: 'BT_BMC_IOCTL_SMS_ATN' that can be used by the system running
> on the BMC to signal the host of such an event.
>
> The device name defaults to '/dev/ipmi-bt-host'
>
> Signed-off-by: Alistair Popple <alistair@popple.id.au>
> Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
>
Acked-by: Arnd Bergmann <arnd@arndb.de>
^ permalink raw reply
* [PATCH] dmaengine: mv_xor: Add support for scatter-gather DMA mode
From: kbuild test robot @ 2016-09-16 11:56 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20160916093518.14889-1-sr@denx.de>
Hi Stefan,
[auto build test ERROR on linus/master]
[also build test ERROR on v4.8-rc6 next-20160916]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
[Suggest to use git(>=2.9.0) format-patch --base=<commit> (or --base=auto for convenience) to record what (public, well-known) commit your patch series was built on]
[Check https://git-scm.com/docs/git-format-patch for more information]
url: https://github.com/0day-ci/linux/commits/Stefan-Roese/dmaengine-mv_xor-Add-support-for-scatter-gather-DMA-mode/20160916-175703
config: x86_64-allmodconfig (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
# save the attached .config to linux build tree
make ARCH=x86_64
All error/warnings (new ones prefixed by >>):
drivers/dma/mv_xor.c: In function 'mv_xor_prep_dma_sg':
>> drivers/dma/mv_xor.c:631:24: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t {aka long unsigned int}' [-Wformat=]
"Transfer size of %d too small!\n", len);
^
>> drivers/dma/mv_xor.c:641:9: error: implicit declaration of function 'mv_xor_add_io_win' [-Werror=implicit-function-declaration]
ret = mv_xor_add_io_win(mv_chan, dma_dst);
^~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
vim +/mv_xor_add_io_win +641 drivers/dma/mv_xor.c
625 len = min_t(size_t, len, MV_XOR_MAX_BYTE_COUNT);
626 if (len == 0)
627 goto fetch;
628
629 if (len < MV_XOR_MIN_BYTE_COUNT) {
630 dev_err(mv_chan_to_devp(mv_chan),
> 631 "Transfer size of %d too small!\n", len);
632 goto err;
633 }
634
635 dma_dst = sg_dma_address(dst_sg) + sg_dma_len(dst_sg) -
636 dst_avail;
637 dma_src = sg_dma_address(src_sg) + sg_dma_len(src_sg) -
638 src_avail;
639
640 /* Check if a new window needs to get added for 'dst' */
> 641 ret = mv_xor_add_io_win(mv_chan, dma_dst);
642 if (ret)
643 goto err;
644
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/octet-stream
Size: 55517 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160916/4e701470/attachment-0001.obj>
^ permalink raw reply
* [PATCH v2 0/3] ARM: aspeed: add support for the BT IPMI interface
From: Arnd Bergmann @ 2016-09-16 11:58 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1474022367-21029-1-git-send-email-clg@kaod.org>
On Friday, September 16, 2016 12:39:24 PM CEST C?dric Le Goater wrote:
>
> C?dric Le Goater (2):
> ARM: aspeed: Add defconfigs for CONFIG_ASPEED_BT_IPMI_BMC
> ARM: dts: aspeed: Enable BT IPMI BMC device
These two should go through the arm-soc tree, I assume Joel
will forward them to arm at kernel.org once the driver gets
picked up into the ipmi tree.
Arnd
^ permalink raw reply
* [PATCH] ARM: dts: exynos: Remove "simple-bus" compatible from fimc-is node
From: Krzysztof Kozlowski @ 2016-09-16 11:58 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1474014825-28969-1-git-send-email-s.nawrocki@samsung.com>
On 09/16/2016 10:33 AM, Sylwester Nawrocki wrote:
> The "simple-bus" compatible was originally added for fimc-is only
> to ensure the child devices instantiation. The child devices are
> now being created by the parent device driver so remove the
> "simple-bus" compatible.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> arch/arm/boot/dts/exynos4x12.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply
* [PATCH v2] ARM: dts: exynos: Add entries for sound support on Odroid-XU board
From: Krzysztof Kozlowski @ 2016-09-16 11:58 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <f4d204d8-b6b8-5173-c530-bfea1ec9ed7d@samsung.com>
On 09/16/2016 01:25 PM, Sylwester Nawrocki wrote:
> On 09/16/2016 01:22 PM, Sylwester Nawrocki wrote:
>> This patch adds device nodes for the AUDSS clock controller,
>> peripheral DMA 0/1 controllers and the Audio Subsystem I2S controller.
>> These entries are required for sound support on Odroid-XU board.
>>
>> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
>> ---
>> This patch depends on a patch adding clock ID macro definitions.
>> I'm going to provide a topic branch containing required changes.
>>
>> Changes since v1:
>> - GIC_SPI, IRQ_TYPE_NONE used in the PDMA and max98080 interrupt
>> specifiers,
>> - assigned-clock-* properties moved to respective controller
>> nodes.
>
> And here is a pull request containing clk dependency patches:
>
> The following changes since commit 29b4817d4018df78086157ea3a55c1d9424a7cfc:
>
> Linux 4.8-rc1 (2016-08-07 18:18:00 -0700)
>
> are available in the git repository at:
>
> git://linuxtv.org/snawrocki/samsung.git tags/clk-v4.9-exynos54x0-dt
>
> for you to fetch changes up to 58d6506f327e3d192998ba03632f546da221b8d8:
>
> clk: samsung: exynos5410: Add clock IDs for PDMA and EPLL clocks (2016-09-09
> 10:13:02 +0200)
>
Pulled and applied, thanks!
Krzysztof
^ permalink raw reply
* [PATCH] ARM: dts: msm8974: Add definitions for QCE & cryptobam
From: Iaroslav Gridin @ 2016-09-16 11:59 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20160915211842.GB5431@hector.attlocal.net>
On Thu, Sep 15, 2016 at 04:18:42PM -0500, Andy Gross wrote:
> Actually, on thinking about this more, the bam block itself only
> requires the
> single clock. The peripheral it is attached to has to keep its sanity
> during
> the duration of the transfer (crypto). The crypto requires 3 clocks,
> one of
> which is the same clk the bam requires.
>
> You can access the BAM registers with the bam_clk only, correct?
No, with only bam_clk board reboots. In fact, core_clk is the only
required one.
> The CLK_SRC is unnecessary. Or should be at least. That gets turned
> on by
> getting the CE2_CLK. I vaguely remember a parent issue that was
> fixed.
Yes, I thought it was required to change its speed to achieve maximum
QCE performance but as it have been pointed out, same adjustment on core
clock does the same.
^ permalink raw reply
* [PATCHv9 0/6] dmaengine: rcar-dmac: add iommu support for slave transfers
From: Arnd Bergmann @ 2016-09-16 12:02 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <2210422.ogrYIr1eQU@avalon>
On Friday, September 16, 2016 12:48:23 PM CEST Laurent Pinchart wrote:
> On Friday 16 Sep 2016 11:07:48 Arnd Bergmann wrote:
> > On Thursday, September 15, 2016 9:56:51 PM CEST Vinod Koul wrote:
> > > On Wed, Aug 10, 2016 at 11:07:10PM +0530, Vinod Koul wrote:
> > >> On Wed, Aug 10, 2016 at 01:22:13PM +0200, Niklas S?derlund wrote:
> > I had not looked at the series earlier, but this version looks entirely
> > reasonable to me, so
> >
> > Acked-by: Arnd Bergmann <arnd@arndb.de>
> >
> >
> > One concern I have is that we might get an awkward situation if we ever
> > encounter one DMA engine hardware that is used in different systems that all
> > have an IOMMU, but on some of them the connection between the DMA master and
> > the slave FIFO bypasses the IOMMU while on others the IOMMU is required.
>
> Do you mean systems where some of the channels of a specific DMA engine go
> through the IOMMU while others do not ? We indeed have no solution today for
> such a situation.
I wasn't thinking quite that far, though that is also a theoretical
problem. However, the simple solution would be to have a bit in the DMA
specifier let the driver know whether translation is needed or not.
The simpler case I was thinking of is where the entire DMA engine
either goes through an IOMMU or doesn't (depending on the integration
into the SoC), so we'd have to find out through some DT property
or compatible string in the DMA enginen driver.
> The problem is a bit broader than that, we'll also have an issue with DMA
> engines that have different channels served by different IOMMUs.
Do you mean a theoretical problem, or a chip that you already know exists?
> I recall
> discussing this in the past with you, and the solution you proposed was to add
> a channel index to struct dma_attrs seems good to me. To support the case
> where some channels don't go through an IOMMU we would only need support for
> null entries in the IOMMUs list associated with a device (for instance in the
> DT case null entries in the iommus property).
>
> Now I see that struct dma_attrs has been replaced by unsigned long in
>
> commit 00085f1efa387a8ce100e3734920f7639c80caa3
> Author: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Date: Wed Aug 3 13:46:00 2016 -0700
>
> dma-mapping: use unsigned long for dma_attrs
>
> We still have enough bits to reserve some of them for a channel number, but
> I'm not very happy with that patch as I can see how a future proposal to
> handle the channel number through the DMA attributes will get rejected on the
> grounds of bits starvation then :-(
Agreed, that can become interesting.
Arnd
^ permalink raw reply
* [PATCHv9 0/6] dmaengine: rcar-dmac: add iommu support for slave transfers
From: Laurent Pinchart @ 2016-09-16 12:05 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <55e0ee95-fcbb-918a-da94-85f3aeb6ed37@arm.com>
Hi Rubin,
On Friday 16 Sep 2016 11:36:29 Robin Murphy wrote:
> On 16/09/16 10:48, Laurent Pinchart wrote:
> > On Friday 16 Sep 2016 11:07:48 Arnd Bergmann wrote:
> >> On Thursday, September 15, 2016 9:56:51 PM CEST Vinod Koul wrote:
> >>> On Wed, Aug 10, 2016 at 11:07:10PM +0530, Vinod Koul wrote:
> >>>> On Wed, Aug 10, 2016 at 01:22:13PM +0200, Niklas S?derlund wrote:
> >>>>> Hi,
> >>>>>
> >>>>> This series tries to solve the problem with DMA with device registers
> >>>>> (MMIO registers) that are behind an IOMMU for the rcar-dmac driver. A
> >>>>> recent patch '9575632 (dmaengine: make slave address physical)'
> >>>>> clarifies that DMA slave address provided by clients is the physical
> >>>>> address. This puts the task of mapping the DMA slave address from a
> >>>>> phys_addr_t to a dma_addr_t on the DMA engine.
> >>>>>
> >>>>> Without an IOMMU this is easy since the phys_addr_t and dma_addr_t are
> >>>>> the same and no special care is needed. However if you have a IOMMU
> >>>>> you need to map the DMA slave phys_addr_t to a dma_addr_t using
> >>>>> something like this.
> >>>>>
> >>>>> This series is based on top of v4.8-rc1. And I'm hoping to be able to
> >>>>> collect a Ack from Russell King on patch 4/6 that adds the ARM
> >>>>> specific part and then be able to take the whole series through the
> >>>>> dmaengine tree. If this is not the best route I'm more then happy to
> >>>>> do it another way.
> >>>>>
> >>>>> It's tested on a Koelsch with CONFIG_IPMMU_VMSA and by enabling the
> >>>>> ipmmu_ds node in r8a7791.dtsi. I verified operation by interacting
> >>>>> with /dev/mmcblk1, i2c and the serial console which are devices behind
> >>>>> the iommu.
> >>>>
> >>>> As I said in last one, the dmaengine parts look fine to me. But to go
> >>>> thru dmaengine tree I would need ACK on non dmaengine patches.
> >>>
> >>> I havent heard back from this one and I am inclined to merge this one
> >>> now. If anyone has any objects, please speak up now...
> >>>
> >>> Also ACKs welcome...
> >>
> >> I had not looked at the series earlier, but this version looks entirely
> >> reasonable to me, so
> >>
> >> Acked-by: Arnd Bergmann <arnd@arndb.de>
> >>
> >>
> >> One concern I have is that we might get an awkward situation if we ever
> >> encounter one DMA engine hardware that is used in different systems that
> >> all have an IOMMU, but on some of them the connection between the DMA
> >> master and the slave FIFO bypasses the IOMMU while on others the IOMMU
> >> is required.
> >
> > Do you mean systems where some of the channels of a specific DMA engine go
> > through the IOMMU while others do not ? We indeed have no solution today
> > for such a situation.
> >
> > The problem is a bit broader than that, we'll also have an issue with DMA
> > engines that have different channels served by different IOMMUs. I recall
> > discussing this in the past with you, and the solution you proposed was to
> > add a channel index to struct dma_attrs seems good to me. To support the
> > case where some channels don't go through an IOMMU we would only need
> > support for null entries in the IOMMUs list associated with a device (for
> > instance in the DT case null entries in the iommus property).
>
> I think at that point we just create the channels as child devices of
> the main dmaengine device so they each get their own DMA ops, and can do
> whatever. The Qualcomm HIDMA driver already does that for a very similar
> reason (so that the IOMMU can map individual channels into different
> guest VMs).
That's another option, but it seems more like a workaround to me, instead of a
proper solution to fix the more global problem of multiple memory paths within
a single device. I have other hardware devices that can act as bus masters
through different paths (for instance a display-related device that fetches
data and commands through different paths). Luckily so far all those paths are
served by the same IOMMU, but there's no guarantee this will remain true in
the future. Furthermore, even today, the IOMMU connected to that device has
the ability to selectively enable and disable its ports. I have to keep them
all enabled due to the lack of channel information in the DMA mapping and
IOMMU APIs, leading to increased power consumption.
> > Now I see that struct dma_attrs has been replaced by unsigned long in
> >
> > commit 00085f1efa387a8ce100e3734920f7639c80caa3
> > Author: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > Date: Wed Aug 3 13:46:00 2016 -0700
> >
> > dma-mapping: use unsigned long for dma_attrs
> >
> > We still have enough bits to reserve some of them for a channel number,
> > but I'm not very happy with that patch as I can see how a future proposal
> > to handle the channel number through the DMA attributes will get rejected
> > on the grounds of bits starvation then :-(
> >
> >> I don't have any idea for how this could be handled in a generic way, so
> >> my best answer here is to hope we never get there, and if we do, handle
> >> it using some local hack in the driver.
--
Regards,
Laurent Pinchart
^ permalink raw reply
* [PATCH] of/platform: Initialise dev->fwnode appropriately
From: Robin Murphy @ 2016-09-16 12:07 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20160915133657.GB14424@rob-hp-laptop>
On 15/09/16 14:36, Rob Herring wrote:
> On Wed, Sep 14, 2016 at 04:01:24PM +0100, Robin Murphy wrote:
>> Whilst we're some of the way towards a universal firmware property
>> interface, drivers which deal with both OF and ACPI probing end up
>> having to do things like this:
>>
>> dev->of_node ? &dev->of_node->fwnode : dev->fwnode
>>
>> This seems unnecessary, when the OF code could instead simply fill in
>> the device's fwnode when binding the of_node, and let the drivers use
>> dev->fwnode either way. Let's give it a go and see what falls out.
>>
>> Signed-off-by: Robin Murphy <robin.murphy@arm.com>
>> ---
>> drivers/of/platform.c | 2 ++
>> 1 file changed, 2 insertions(+)
>
> I've applied this, but what about non-platform devices such as i2c?
I was indeed wondering that, coming from the perspective of DMA/IOMMU
configuration which doesn't really apply beyond the PCI and platform
buses. More generally, at this point it's largely for the benefit of
subsystems which need to chuck around firmware data for other devices
that don't exist yet (or at all), which maybe is just the DMA and IRQ
layers.
I guess beyond that it comes down to auditing the intersection between
callers of the property API and OF-probed buses, then killing the
dev_fwnode() helper in property.c and making sure nothing else breaks.
The possible alternative would be pushing this right down into
device_initialize(), but that seems a bit wrong.
Thanks,
Robin.
>
> Rob
>
^ permalink raw reply
* [PATCHv9 0/6] dmaengine: rcar-dmac: add iommu support for slave transfers
From: Laurent Pinchart @ 2016-09-16 12:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <2277430.yNKNTgNkoj@wuerfel>
Hi Arnd,
On Friday 16 Sep 2016 14:02:35 Arnd Bergmann wrote:
> On Friday, September 16, 2016 12:48:23 PM CEST Laurent Pinchart wrote:
> > On Friday 16 Sep 2016 11:07:48 Arnd Bergmann wrote:
> >> On Thursday, September 15, 2016 9:56:51 PM CEST Vinod Koul wrote:
> >>> On Wed, Aug 10, 2016 at 11:07:10PM +0530, Vinod Koul wrote:
> >>>> On Wed, Aug 10, 2016 at 01:22:13PM +0200, Niklas S?derlund wrote:
> >>
> >> I had not looked at the series earlier, but this version looks entirely
> >> reasonable to me, so
> >>
> >> Acked-by: Arnd Bergmann <arnd@arndb.de>
> >>
> >>
> >> One concern I have is that we might get an awkward situation if we ever
> >> encounter one DMA engine hardware that is used in different systems that
> >> all have an IOMMU, but on some of them the connection between the DMA
> >> master and the slave FIFO bypasses the IOMMU while on others the IOMMU
> >> is required.
> >
> > Do you mean systems where some of the channels of a specific DMA engine go
> > through the IOMMU while others do not ? We indeed have no solution today
> > for such a situation.
>
> I wasn't thinking quite that far, though that is also a theoretical
> problem. However, the simple solution would be to have a bit in the DMA
> specifier let the driver know whether translation is needed or not.
>
> The simpler case I was thinking of is where the entire DMA engine
> either goes through an IOMMU or doesn't (depending on the integration
> into the SoC), so we'd have to find out through some DT property
> or compatible string in the DMA enginen driver.
Don't we already get that information from the iommus DT property ? If the DMA
engine goes through an IOMMU the property will be set, otherwise it will not.
> > The problem is a bit broader than that, we'll also have an issue with DMA
> > engines that have different channels served by different IOMMUs.
>
> Do you mean a theoretical problem, or a chip that you already know exists?
That's theoretical. The problem I'm facing today is a DMA engine whose
channels are served by different ports of the same IOMMU. This works in a
suboptimal way because I have to keep all the IOMMU ports enabled regardless
of whether they're used or not, as the DMA engine and IOMMU APIs don't carry
channel information.
> > I recall discussing this in the past with you, and the solution you
> > proposed was to add a channel index to struct dma_attrs seems good to me.
> > To support the case where some channels don't go through an IOMMU we would
> > only need support for null entries in the IOMMUs list associated with a
> > device (for instance in the DT case null entries in the iommus property).
> >
> > Now I see that struct dma_attrs has been replaced by unsigned long in
> >
> > commit 00085f1efa387a8ce100e3734920f7639c80caa3
> > Author: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > Date: Wed Aug 3 13:46:00 2016 -0700
> >
> > dma-mapping: use unsigned long for dma_attrs
> >
> > We still have enough bits to reserve some of them for a channel number,
> > but I'm not very happy with that patch as I can see how a future proposal
> > to handle the channel number through the DMA attributes will get rejected
> > on the grounds of bits starvation then :-(
>
> Agreed, that can become interesting.
Does the above-mentioned patch really fix a performance, memory consumption or
other issue ?
--
Regards,
Laurent Pinchart
^ permalink raw reply
* [RFC PATCH 0/5] arm64: Signal context expansion
From: Florian Weimer @ 2016-09-16 12:10 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20160915164543.GB1574@e103592.cambridge.arm.com>
On 09/15/2016 06:45 PM, Dave Martin wrote:
> On Tue, Sep 13, 2016 at 06:02:45PM +0200, Florian Weimer wrote:
>> On 09/13/2016 05:52 PM, Dave Martin wrote:
>>
>>> Agreed. I'll need to think some more about how this should work in
>>> general.
>>
>> Thanks.
>>
>> Depending on some SVE implementations details (which I know nothing about, I
>> only saw some public overview slides), we may also need additional storage
>> space to preserve SVE registers in the dynamic linker. Due to lazy binding,
>> this code cn be called from a signal handler, so this needs to be factored
>> into stack size requirements as well.
>
> Yes and no. The kernel SIGSTKSZ constants don't care about ld.so --
> that's userspace overhead, not kernel overhead.
Well yes, so is jmp_buf. But I think you still should consider the full
picture. :)
At least the lazy binding stack overhead can be avoided with LD_BIND_NOW=1.
>> Problematic are register width extensions used for argument passing and
>> callee-saved registers whose width has been extended. Both are particularly
>> challenging to deal with if existing vector instructions clear the extension
>> part (which may be desirable for other reasons).
>>
>> The size of the jmp_buf type is a concern as well.
>
> The default PCS for SVE will not be introducing any extra save/restore
> requirements for SVE -- i.e., everything is caller-save at public
> interfaces, except for the FPSIMD register bits that are already callee-
> save under the existing PCS.
Is it possible to pass arguments in the register extension parts? If
existing non-SVE code can clobber these bits, we need some adjustments
in libc to save and restore SVE state in some places (which may need
further stack space).
Again, for lazy binding, LD_BIND_NOW=1 will help temporarily, but
profiling code may need a separate fix.
Thanks,
Florian
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox