* [PULL 00/50] KVM/ARM Changes for v4.9
From: Christoffer Dall @ 2016-09-27 18:05 UTC (permalink / raw)
To: linux-arm-kernel
Hi Paolo and Radim,
Here are the KVM/ARM Changes for v4.9. They include:
- Various cleanups and removal of redundant code
- Two important fixes for not using an in-kernel irqchip
- A bit of optimizations
- Handle SError exceptions and present them to guests if appropriate
- Proxying of GICV access at EL2 if guest mappings are unsafe
- GICv3 on AArch32 on ARMv8
- Preparations for GICv3 save/restore, including ABI docs
The following changes since commit 9ac7e3e815060efdc86b6d12448200e3c3597e01:
KVM: nVMX: expose INS/OUTS information support (2016-09-07 19:34:30 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm.git tags/kvm-arm-for-v4.9
for you to fetch changes up to 0099b7701f5296a758d9e6b945ec96f96847cc2f:
KVM: arm/arm64: vgic: Don't flush/sync without a working vgic (2016-09-27 18:57:35 +0200)
Thanks,
-Christoffer
---
Christoffer Dall (6):
KVM: arm/arm64: Add VGICv3 save/restore API documentation
KVM: arm/arm64: Factor out vgic_attr_regs_access functionality
KVM: arm/arm64: Rename vgic_attr_regs_access to vgic_attr_regs_access_v2
KVM: arm/arm64: Get rid of exported aliases to static functions
KVM: arm64: Require in-kernel irqchip for PMU support
KVM: arm/arm64: vgic: Don't flush/sync without a working vgic
Marc Zyngier (28):
KVM: arm: vgic: Drop build compatibility hack for older kernel versions
arm64: KVM: Move kvm_vcpu_get_condition out of emulate.c
arm64: KVM: Move the AArch32 conditional execution to common code
arm: KVM: Use common AArch32 conditional execution code
arm64: KVM: Make kvm_skip_instr32 available to HYP
arm64: KVM: vgic-v2: Add the GICV emulation infrastructure
arm64: KVM: vgic-v2: Add GICV access from HYP
arm64: KVM: vgic-v2: Enable GICV access from HYP if access from guest is unsafe
arm64: KVM: Rename HCR_VA to HCR_VSE
arm64: KVM: Preserve pending vSError in world switch
arm64: KVM: Add Virtual Abort injection helper
arm64: KVM: Add exception code to report EL1 asynchronous aborts
arm64: KVM: Add EL1 async abort handler
arm64: KVM: Route asynchronous aborts
arm64: KVM: Allow an exit code to be tagged with an SError
arm64: KVM: Inject a Virtual SError if it was pending
arm64: KVM: Handle async aborts delivered while at EL2
arm: KVM: Preserve pending Virtual Abort in world switch
arm: KVM: Add Virtual Abort injection helper
arm: KVM: Add HYP async abort handler
arm: KVM: Allow an exit code to be tagged with a Virtual Abort
arm: KVM: Handle async aborts delivered while at HYP
arm: KVM: Inject a Virtual Abort if it was pending
arm: KVM: Drop unreachable HYP abort handlers
arm/arm64: KVM: Inject virtual abort when guest exits on external abort
arm/arm64: KVM: Remove external abort test from MMIO handling
arm64: KVM: Inject a vSerror if detecting a bad GICV access at EL2
ARM: gic-v3: Work around definition of gic_write_bpr1
Mark Rutland (2):
arm/kvm: excise redundant cache maintenance
arm64/kvm: remove unused stub functions
Paolo Bonzini (1):
KVM: ARM: cleanup kvm_timer_hyp_init
Shanker Donthineni (1):
arm64: KVM: Optimize __guest_enter/exit() to save a few instructions
Vladimir Murzin (12):
arm64: KVM: VHE: reset PSTATE.PAN on entry to EL2
arm64: KVM: Use static keys for selecting the GIC backend
arm64: KVM: Move GIC accessors to arch_gicv3.h
arm64: KVM: Move vgic-v3 save/restore to virt/kvm/arm/hyp
KVM: arm64: vgic-its: Introduce config option to guard ITS specific code
KVM: arm: vgic: Fix compiler warnings when built for 32-bit
KVM: arm: vgic: Support 64-bit data manipulation on 32-bit host systems
ARM: Introduce MPIDR_LEVEL_SHIFT macro
ARM: Move system register accessors to asm/cp15.h
ARM: gic-v3: Introduce 32-to-64-bit mappings for GICv3 cpu registers
ARM: KVM: Support vgic-v3
arm64: KVM: Remove duplicating init code for setting VMID
Documentation/virtual/kvm/devices/arm-vgic-its.txt | 38 ++++
Documentation/virtual/kvm/devices/arm-vgic-v3.txt | 206 +++++++++++++++++++++
Documentation/virtual/kvm/devices/arm-vgic.txt | 52 ++----
Documentation/virtual/kvm/devices/vcpu.txt | 4 +-
arch/arm/include/asm/arch_gicv3.h | 100 ++++++++--
arch/arm/include/asm/cp15.h | 15 ++
arch/arm/include/asm/cputype.h | 1 +
arch/arm/include/asm/kvm_asm.h | 7 +
arch/arm/include/asm/kvm_emulate.h | 35 +++-
arch/arm/include/asm/kvm_host.h | 5 +
arch/arm/include/asm/kvm_hyp.h | 18 +-
arch/arm/include/asm/kvm_mmu.h | 28 +--
arch/arm/include/uapi/asm/kvm.h | 7 +
arch/arm/kvm/Makefile | 3 +
arch/arm/kvm/arm.c | 12 +-
arch/arm/kvm/coproc.c | 35 ++++
arch/arm/kvm/emulate.c | 111 ++---------
arch/arm/kvm/handle_exit.c | 49 +++--
arch/arm/kvm/hyp/Makefile | 1 +
arch/arm/kvm/hyp/entry.S | 31 ++++
arch/arm/kvm/hyp/hyp-entry.S | 16 +-
arch/arm/kvm/hyp/switch.c | 25 ++-
arch/arm/kvm/hyp/tlb.c | 15 +-
arch/arm/kvm/mmio.c | 6 -
arch/arm/kvm/mmu.c | 7 +-
arch/arm64/include/asm/arch_gicv3.h | 13 ++
arch/arm64/include/asm/kvm_arm.h | 4 +-
arch/arm64/include/asm/kvm_asm.h | 9 +-
arch/arm64/include/asm/kvm_emulate.h | 11 ++
arch/arm64/include/asm/kvm_hyp.h | 1 +
arch/arm64/include/asm/kvm_mmu.h | 6 -
arch/arm64/kvm/Kconfig | 4 +-
arch/arm64/kvm/Makefile | 3 +-
arch/arm64/kvm/handle_exit.c | 23 +++
arch/arm64/kvm/hyp/Makefile | 2 +-
arch/arm64/kvm/hyp/debug-sr.c | 4 +-
arch/arm64/kvm/hyp/entry.S | 128 ++++++++-----
arch/arm64/kvm/hyp/hyp-entry.S | 73 +++++---
arch/arm64/kvm/hyp/switch.c | 84 +++++++--
arch/arm64/kvm/hyp/tlb.c | 13 +-
arch/arm64/kvm/inject_fault.c | 12 ++
include/kvm/arm_vgic.h | 18 +-
arch/arm64/kvm/emulate.c => virt/kvm/arm/aarch32.c | 25 +--
virt/kvm/arm/arch_timer.c | 6 +-
virt/kvm/arm/hyp/vgic-v2-sr.c | 57 ++++++
{arch/arm64/kvm => virt/kvm/arm}/hyp/vgic-v3-sr.c | 17 +-
virt/kvm/arm/pmu.c | 8 +
virt/kvm/arm/vgic/vgic-init.c | 4 +
virt/kvm/arm/vgic/vgic-irqfd.c | 6 -
virt/kvm/arm/vgic/vgic-kvm-device.c | 133 ++++++++-----
virt/kvm/arm/vgic/vgic-mmio-v3.c | 8 +-
virt/kvm/arm/vgic/vgic-mmio.c | 2 -
virt/kvm/arm/vgic/vgic-mmio.h | 4 +-
virt/kvm/arm/vgic/vgic-v2.c | 71 ++++---
virt/kvm/arm/vgic/vgic.c | 8 +-
virt/kvm/arm/vgic/vgic.h | 54 +-----
56 files changed, 1076 insertions(+), 562 deletions(-)
create mode 100644 Documentation/virtual/kvm/devices/arm-vgic-its.txt
create mode 100644 Documentation/virtual/kvm/devices/arm-vgic-v3.txt
rename arch/arm64/kvm/emulate.c => virt/kvm/arm/aarch32.c (90%)
rename {arch/arm64/kvm => virt/kvm/arm}/hyp/vgic-v3-sr.c (94%)
^ permalink raw reply
* [PATCH 2/2] ARM: BCM5301X: Add DT for Luxul XWR-3100
From: Dan Haab @ 2016-09-27 17:27 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1474997231-27700-1-git-send-email-dhaab@luxul.com>
Luxul XWR-3100 is a wireless router based on BCM47094 SoC with two
4366c0 FullMAC PCIe cards on the PCB. It uses NAND with BCH-4 ECC
algorithm.
Signed-off-by: Dan Haab <dhaab@luxul.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 111 +++++++++++++++++++++++++
arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi | 13 +++
3 files changed, 125 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b7fbc1b..e46e2d85 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb \
bcm47094-dlink-dir-885l.dtb \
+ bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
bcm94709.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
new file mode 100644
index 0000000..169b35f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+ compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XWR-3100 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ lan3 {
+ label = "bcm53xx:green:lan1";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ lan4 {
+ label = "bcm53xx:green:lan0";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan {
+ label = "bcm53xx:green:wan";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ lan1 {
+ label = "bcm53xx:green:lan3";
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ lan2 {
+ label = "bcm53xx:green:lan2";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:green:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz {
+ label = "bcm53xx:green:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
new file mode 100644
index 0000000..b4e875d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+ nand-ecc-algo = "bch";
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+};
--
1.7.9.5
^ permalink raw reply related
* [PATCH 1/2] ARM: BCM5301X: Add DT for Luxul XAP-1510
From: Dan Haab @ 2016-09-27 17:27 UTC (permalink / raw)
To: linux-arm-kernel
Luxul XAP-1510 is an AP device based on BCM4708 SoC with 2 x BCM4360
chipsets on PCB connected using PCIe.
Signed-off-by: Dan Haab <dhaab@luxul.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 64 ++++++++++++++++++++++++++
2 files changed, 65 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9bfd1ef..b7fbc1b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \
bcm4708-asus-rt-ac68u.dtb \
bcm4708-buffalo-wzr-1750dhp.dtb \
+ bcm4708-luxul-xap-1510.dtb \
bcm4708-luxul-xwc-1000.dtb \
bcm4708-netgear-r6250.dtb \
bcm4708-netgear-r6300-v2.dtb \
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
new file mode 100644
index 0000000..35e6ed6
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ compatible = "luxul,xap-1510v1", "brcm,bcm4708";
+ model = "Luxul XAP-1510 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&spi_nor {
+ status = "okay";
+};
--
1.7.9.5
^ permalink raw reply related
* [PATCH v2 8/8] ARM: bcm2835: Disable i2c2 in the Device Tree
From: Stefan Wahren @ 2016-09-27 17:25 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1474977426-3272-9-git-send-email-noralf@tronnes.org>
> Noralf Tr?nnes <noralf@tronnes.org> hat am 27. September 2016 um 13:57
> geschrieben:
>
>
> i2c2 is connected to the HDMI connector and is controlled by the
> firmware. Disable it to stay out of harms way.
Until this point the commit message is okay, the rest is more confusing.
Btw this should avoid a warning about missing clock frequency.
>
> From the downstream commit:
> i2c-bcm2708/BCM270X_DT: Add support for I2C2
>
> The third I2C bus (I2C2) is normally reserved for HDMI use. Careless
> use of this bus can break an attached display - use with caution.
>
> It is recommended to disable accesses by VideoCore by setting
> hdmi_ignore_edid=1 or hdmi_edid_file=1 in config.txt.
>
> Signed-off-by: Noralf Tr?nnes <noralf@tronnes.org>
> ---
> arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi
> b/arch/arm/boot/dts/bcm2835-rpi.dtsi
> index e9b47b2..8bffbee 100644
> --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
> +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
> @@ -59,10 +59,6 @@
> clock-frequency = <100000>;
> };
>
> -&i2c2 {
> - status = "okay";
> -};
> -
I'm not sure if this the right fix. According to bcm283x.dtsi the 3 i2c busses
have the same compatible string "brcm,bcm2835-i2c", but the changelog suggests
that this bus is "special".
Shouldn't we use a different compatible string? Our intention isn't to disable
i2c2 but avoid any claims of the usual i2c driver.
> &sdhci {
> status = "okay";
> bus-width = <4>;
> --
> 2.8.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* [PATCH v9 17/19] drm/virtio: kconfig: Fix recursive dependency issue.
From: Bjorn Andersson @ 2016-09-27 17:01 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CACvgo53fuoPVjBAkZbWFPVxosObjvxoDgFdR_BkSTgevqyGg9g@mail.gmail.com>
On Wed 21 Sep 05:09 PDT 2016, Emil Velikov wrote:
> On 20 September 2016 at 09:32, Peter Griffin <peter.griffin@linaro.org> wrote:
> > Hi Emil,
> >
> > On Tue, 20 Sep 2016, Emil Velikov wrote:
> >
> >> On 5 September 2016 at 14:16, Peter Griffin <peter.griffin@linaro.org> wrote:
> >> > ST_SLIM_REMOTEPROC must select REMOTEPROC, which exposes the following
> >> > recursive dependency.
> >
> >
> >> >
> >> From a humble skim through remoteproc, drm and a few other subsystems
> >> I think the above is wrong. All the drivers (outside of remoteproc),
> >> that I've seen, depend on the core component, they don't select it.
> >
> > I will let Bjorn comment on the remoteproc subsystem Kconfig design, and
> > why it is like it is.
> >
> > For this particular SLIM_RPROC I have added it to Kconfig in keeping with all
> > the other drivers in the remoteproc subsystem which has exposed this recursive
> > dependency issue.
> >
> > For this particular kconfig symbol a quick grep reveals more drivers in
> > the kernel using 'select', than 'depend on'
> >
> > git grep "select VIRTIO" | wc -l
> > 14
> >
> > git grep "depends on VIRTIO" | wc -l
> > 10
> >
> Might be worth taking a closer look into these at some point.
>
The general idea here is that VIRTIO provides the "framework" and as
such drivers implementing VIRTIO do select and drivers using virtio use
depends.
This is found in several places around the kernel.
> >
> >> Furthermore most places explicitly hide the drivers from the menu if
> >> the core component isn't enabled.
> >
> > Remoteproc subsystem takes a different approach, the core code is only enabled
> > if a driver which relies on it is enabled. This IMHO makes sense, as
> > remoteproc is not widely used (only a few particular ARM SoC's).
> >
> > It is true that for subsystems which rely on the core component being
> > explicitly enabled, they often tend to hide drivers which depend on it
> > from the menu unless it is. This also makes sense.
> >
> >>
> >> Is there something that requires such a different/unusual behaviour in
> >> remoteproc ?
> >>
There's nothing unusual in remoteproc that forces us to stay with this
model; however the parts related to the REMOTEPROC config is useless by
themselves.
Regards,
Bjorn
^ permalink raw reply
* ARM juno R2 board USB Issue (EHCI probe failed)
From: Sudeep Holla @ 2016-09-27 17:01 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <9b231601-2c6a-a5d7-471f-4fc0d8190d83@arm.com>
On 27/09/16 17:23, Robin Murphy wrote:
> On 27/09/16 17:13, Hanjun Guo wrote:
>> On 09/27/2016 05:07 PM, Sudeep Holla wrote:
[...]
>>>>
>>>> As I mentioned in private, I do get the same error if I drop _CCA in
>>>> USB object of ACPI DSDT. Can you give it a spin with latest UEFI ?
>>>>
>>>> Sure, will try with latest UEFI.
>>>>
>>>
>>> I bet that's 8-12 months old. It puts the banner during boot with the
>>> build date. You can try to follow [1] or access it from [2]
>>
>> Agree.
>>
>> D03 is using the same IP (EHCI) and the USB works fine with _CCA
>> in the device node.
>
> _CCA is mandatory on arm64 (see CONFIG_ACPI_CCA_REQUIRED). Any devices
> without it are going to end up with the dummy DMA ops which
> intentionally fail if a driver tries to use them - i.e. the error seen
> above is by design.
>
Yes that was the first thing I thought and gave it try with _CCA removed
in ACPI DSDT on my Juno R2. It so happens that we did ship it some
*custom* UEFI until Linaro 16.02 in which upstream EDK2 was merged :(
Since Vikas was trying boot out of USB, I didn't suggest him to take a
acpidump on Juno and confirm this by looking at the DSDT. Also I could
find a commit from Leif that adds _CCA to USB in OpenPlatformPkg to
confirm this.
--
Regards,
Sudeep
^ permalink raw reply
* [PATCH 2/2] drm/rockchip: mark symbols static where possible
From: Sean Paul @ 2016-09-27 16:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1474789388-3284-1-git-send-email-baoyou.xie@linaro.org>
On Sun, Sep 25, 2016 at 3:43 AM, Baoyou Xie <baoyou.xie@linaro.org> wrote:
> We get 2 warnings when building kernel with W=1:
> drivers/gpu/drm/rockchip/rockchip_drm_drv.c:309:6: warning: no previous prototype for 'rockchip_drm_fb_suspend' [-Wmissing-prototypes]
> drivers/gpu/drm/rockchip/rockchip_drm_drv.c:318:6: warning: no previous prototype for 'rockchip_drm_fb_resume' [-Wmissing-prototypes]
>
> In fact, these functions are only used in the file in which they are
> declared and don't need a declaration, but can be made static.
> So this patch marks these functions with 'static'.
>
> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Applied to -misc, thanks.
Sean
> ---
> drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
> index 76eaf1d..38c3be5 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c
> @@ -309,7 +309,7 @@ static struct drm_driver rockchip_drm_driver = {
> };
>
> #ifdef CONFIG_PM_SLEEP
> -void rockchip_drm_fb_suspend(struct drm_device *drm)
> +static void rockchip_drm_fb_suspend(struct drm_device *drm)
> {
> struct rockchip_drm_private *priv = drm->dev_private;
>
> @@ -318,7 +318,7 @@ void rockchip_drm_fb_suspend(struct drm_device *drm)
> console_unlock();
> }
>
> -void rockchip_drm_fb_resume(struct drm_device *drm)
> +static void rockchip_drm_fb_resume(struct drm_device *drm)
> {
> struct rockchip_drm_private *priv = drm->dev_private;
>
> --
> 2.7.4
>
^ permalink raw reply
* [PATCH] drm/mediatek: mark symbols static where possible
From: Sean Paul @ 2016-09-27 16:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1474789265-30142-1-git-send-email-baoyou.xie@linaro.org>
On Sun, Sep 25, 2016 at 3:41 AM, Baoyou Xie <baoyou.xie@linaro.org> wrote:
> We get 4 warnings when building kernel with W=1:
> drivers/gpu/drm/mediatek/mtk_hdmi.c:1089:6: warning: no previous prototype for 'mtk_hdmi_audio_enable' [-Wmissing-prototypes]
> drivers/gpu/drm/mediatek/mtk_hdmi.c:1095:6: warning: no previous prototype for 'mtk_hdmi_audio_disable' [-Wmissing-prototypes]
> drivers/gpu/drm/mediatek/mtk_hdmi.c:1101:5: warning: no previous prototype for 'mtk_hdmi_audio_set_param' [-Wmissing-prototypes]
> drivers/gpu/drm/mediatek/mtk_hdmi.c:1627:5: warning: no previous prototype for 'mtk_hdmi_audio_digital_mute' [-Wmissing-prototypes]
>
> In fact, both functions are only used in the file in which they are
> declared and don't need a declaration, but can be made static.
> So this patch marks both functions with 'static'.
>
> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Applied to -misc, thanks.
Sean
> ---
> drivers/gpu/drm/mediatek/mtk_hdmi.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
> index 334562d..be4e19c 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
> @@ -1086,19 +1086,19 @@ static int mtk_hdmi_output_init(struct mtk_hdmi *hdmi)
> return 0;
> }
>
> -void mtk_hdmi_audio_enable(struct mtk_hdmi *hdmi)
> +static void mtk_hdmi_audio_enable(struct mtk_hdmi *hdmi)
> {
> mtk_hdmi_aud_enable_packet(hdmi, true);
> hdmi->audio_enable = true;
> }
>
> -void mtk_hdmi_audio_disable(struct mtk_hdmi *hdmi)
> +static void mtk_hdmi_audio_disable(struct mtk_hdmi *hdmi)
> {
> mtk_hdmi_aud_enable_packet(hdmi, false);
> hdmi->audio_enable = false;
> }
>
> -int mtk_hdmi_audio_set_param(struct mtk_hdmi *hdmi,
> +static int mtk_hdmi_audio_set_param(struct mtk_hdmi *hdmi,
> struct hdmi_audio_param *param)
> {
> if (!hdmi->audio_enable) {
> @@ -1624,7 +1624,8 @@ static void mtk_hdmi_audio_shutdown(struct device *dev, void *data)
> mtk_hdmi_audio_disable(hdmi);
> }
>
> -int mtk_hdmi_audio_digital_mute(struct device *dev, void *data, bool enable)
> +static int
> +mtk_hdmi_audio_digital_mute(struct device *dev, void *data, bool enable)
> {
> struct mtk_hdmi *hdmi = dev_get_drvdata(dev);
>
> --
> 2.7.4
>
^ permalink raw reply
* [PATCH 1/2] drm/rockchip: add missing header dependencies
From: Sean Paul @ 2016-09-27 16:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1474789109-22010-1-git-send-email-baoyou.xie@linaro.org>
On Sun, Sep 25, 2016 at 3:38 AM, Baoyou Xie <baoyou.xie@linaro.org> wrote:
> We get 2 warnings when building kernel with W=1:
> drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c:130:5: warning: no previous prototype for 'rockchip_drm_fbdev_init' [-Wmissing-prototypes]
> drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c:173:6: warning: no previous prototype for 'rockchip_drm_fbdev_fini' [-Wmissing-prototypes]
>
> In fact, these functions are declared
> in drivers/gpu/drm/rockchip/rockchip_drm_fbdev.h,
> so this patch adds missing header dependencies.
>
> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Applied to -misc, thanks.
Sean
> ---
> drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c b/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c
> index 207e01d..a16c69f 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c
> @@ -20,6 +20,7 @@
> #include "rockchip_drm_drv.h"
> #include "rockchip_drm_gem.h"
> #include "rockchip_drm_fb.h"
> +#include "rockchip_drm_fbdev.h"
>
> #define PREFERRED_BPP 32
> #define to_drm_private(x) \
> --
> 2.7.4
>
^ permalink raw reply
* [PATCH] usb: Convert pr_warning to pr_warn
From: Robert Jarzmik @ 2016-09-27 16:26 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <f86b512272987e0faeaccbe6466665175eaefe9a.1474992979.git.joe@perches.com>
Joe Perches <joe@perches.com> writes:
> Use the more common logging mechanism.
>
> Miscellanea:
>
> o Realign multiline statements
> o Coalesce format
>
> Signed-off-by: Joe Perches <joe@perches.com>
For pxa25x_udc.h:
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cheers.
--
Robert
^ permalink raw reply
* ARM juno R2 board USB Issue (EHCI probe failed)
From: Robin Murphy @ 2016-09-27 16:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <57EA9AAA.5090504@linaro.org>
On 27/09/16 17:13, Hanjun Guo wrote:
> On 09/27/2016 05:07 PM, Sudeep Holla wrote:
>>
>>
>> On 27/09/16 09:55, Sajjan, Vikas C wrote:
>>> Hi Sudeep,
>>>
>>> -----Original Message-----
>>> From: Sudeep Holla [mailto:sudeep.holla at arm.com]
>>> Sent: Tuesday, September 27, 2016 2:21 PM
>>> To: Vikas Sajjan <sajjan.linux@gmail.com>; linux-usb at vger.kernel.org;
>>> linux-arm-kernel at lists.infradead.org; linux-acpi at vger.kernel.org
>>> Cc: Sudeep Holla <sudeep.holla@arm.com>; mark.rutland at arm.com;
>>> lorenzo.pieralisi at arm.com; Sajjan, Vikas C <vikas.cha.sajjan@hpe.com>
>>> Subject: Re: ARM juno R2 board USB Issue (EHCI probe failed)
>>>
>>> Hi Vikas,
>>>
>>> On 27/09/16 09:14, Vikas Sajjan wrote:
>>>> Adding USB mailing list.
>>>>
>>>>
>>>> On Tue, Sep 27, 2016 at 12:33 PM, Sajjan, Vikas C
>>>> <vikas.cha.sajjan@hpe.com> wrote:
>>>>> Hi All,
>>>>>
>>>>> I working on ARM juno R2 board, with latest kernel 4.8.rc7 and I get
>>>>> below USB EHCI probe error while booting with acpi=force.
>>>>>
>>>
>>> Are you using the latest UEFI EDK2 ?
>>> No, I am still using the UEFI binary which came as part of the Juno
>>> board.
>>>
>>>
>>>>> [ 1.223662] VFIO - User Level meta-driver version: 0.3
>>>>> [ 1.229335] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
>>>>> Driver
>>>>> [ 1.235882] ehci-pci: EHCI PCI platform driver
>>>>> [ 1.240359] ehci-platform: EHCI generic platform driver
>>>>> [ 1.245619] ehci-platform ARMH0D20:00: Error: DMA mask
>>>>> configuration failed
>>>>> [ 1.272491] ehci-platform: probe of ARMH0D20:00 failed with
>>>>> error -5
>>>>> [ 1.278876] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>>>>> [ 1.285071] ohci-pci: OHCI PCI platform driver
>>>>> [ 1.289548] ohci-platform: OHCI generic platform driver
>>>>> [ 1.294884] usbcore: registered new interface driver usb-storage
>>>>> [ 1.301231] mousedev: PS/2 mouse device common for all mice
>>>>> [ 1.307197] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
>>>>>
>>>>> But this error goes off, if I don't force ACPI booting, i.e., if I
>>>>> remove acpi=force from kernel command line , USB is detected and my
>>>>> RFS which is in the usb drive, gets mounted successfully.
>>>>>
>>>
>>> As I mentioned in private, I do get the same error if I drop _CCA in
>>> USB object of ACPI DSDT. Can you give it a spin with latest UEFI ?
>>>
>>> Sure, will try with latest UEFI.
>>>
>>
>> I bet that's 8-12 months old. It puts the banner during boot with the
>> build date. You can try to follow [1] or access it from [2]
>
> Agree.
>
> D03 is using the same IP (EHCI) and the USB works fine with _CCA
> in the device node.
_CCA is mandatory on arm64 (see CONFIG_ACPI_CCA_REQUIRED). Any devices
without it are going to end up with the dummy DMA ops which
intentionally fail if a driver tries to use them - i.e. the error seen
above is by design.
Robin.
>
> Thanks
> Hanjun
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* [PATCH] usb: Convert pr_warning to pr_warn
From: Joe Perches @ 2016-09-27 16:16 UTC (permalink / raw)
To: linux-arm-kernel
Use the more common logging mechanism.
Miscellanea:
o Realign multiline statements
o Coalesce format
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/usb/gadget/function/rndis.c | 9 ++++-----
drivers/usb/gadget/function/u_serial.c | 4 ++--
drivers/usb/gadget/udc/at91_udc.h | 2 +-
drivers/usb/gadget/udc/atmel_usba_udc.c | 4 ++--
drivers/usb/gadget/udc/fsl_usb2_udc.h | 2 +-
drivers/usb/gadget/udc/m66592-udc.c | 4 ++--
drivers/usb/gadget/udc/omap_udc.h | 2 +-
drivers/usb/gadget/udc/pxa25x_udc.h | 2 +-
drivers/usb/host/isp1362-hcd.c | 27 ++++++++++++++-------------
drivers/usb/isp1760/isp1760-if.c | 2 +-
10 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c
index ab6ac1b74ac0..766c328c15c0 100644
--- a/drivers/usb/gadget/function/rndis.c
+++ b/drivers/usb/gadget/function/rndis.c
@@ -474,8 +474,7 @@ static int gen_ndis_query_resp(struct rndis_params *params, u32 OID, u8 *buf,
break;
default:
- pr_warning("%s: query unknown OID 0x%08X\n",
- __func__, OID);
+ pr_warn("%s: query unknown OID 0x%08X\n", __func__, OID);
}
if (retval < 0)
length = 0;
@@ -546,8 +545,8 @@ static int gen_ndis_set_resp(struct rndis_params *params, u32 OID,
break;
default:
- pr_warning("%s: set unknown OID 0x%08X, size %d\n",
- __func__, OID, buf_len);
+ pr_warn("%s: set unknown OID 0x%08X, size %d\n",
+ __func__, OID, buf_len);
}
return retval;
@@ -854,7 +853,7 @@ int rndis_msg_parser(struct rndis_params *params, u8 *buf)
* In one case those messages seemed to relate to the host
* suspending itself.
*/
- pr_warning("%s: unknown RNDIS message 0x%08X len %d\n",
+ pr_warn("%s: unknown RNDIS message 0x%08X len %d\n",
__func__, MsgType, MsgLength);
print_hex_dump_bytes(__func__, DUMP_PREFIX_OFFSET,
buf, MsgLength);
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index e0cd1e4c8892..62ec842874aa 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -622,8 +622,8 @@ static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
switch (req->status) {
default:
/* presumably a transient fault */
- pr_warning("%s: unexpected %s status %d\n",
- __func__, ep->name, req->status);
+ pr_warn("%s: unexpected %s status %d\n",
+ __func__, ep->name, req->status);
/* FALL THROUGH */
case 0:
/* normal completion */
diff --git a/drivers/usb/gadget/udc/at91_udc.h b/drivers/usb/gadget/udc/at91_udc.h
index 0a433e6b346b..9bbe72764f31 100644
--- a/drivers/usb/gadget/udc/at91_udc.h
+++ b/drivers/usb/gadget/udc/at91_udc.h
@@ -175,7 +175,7 @@ struct at91_request {
#endif
#define ERR(stuff...) pr_err("udc: " stuff)
-#define WARNING(stuff...) pr_warning("udc: " stuff)
+#define WARNING(stuff...) pr_warn("udc: " stuff)
#define INFO(stuff...) pr_info("udc: " stuff)
#define DBG(stuff...) pr_debug("udc: " stuff)
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 45bc997d0711..1ef7a9a9d7f5 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1464,8 +1464,8 @@ static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
DBG(DBG_HW, "Packet length: %u\n", pkt_len);
if (pkt_len != sizeof(crq)) {
- pr_warning("udc: Invalid packet length %u "
- "(expected %zu)\n", pkt_len, sizeof(crq));
+ pr_warn("udc: Invalid packet length %u (expected %zu)\n",
+ pkt_len, sizeof(crq));
set_protocol_stall(udc, ep);
return;
}
diff --git a/drivers/usb/gadget/udc/fsl_usb2_udc.h b/drivers/usb/gadget/udc/fsl_usb2_udc.h
index 84715625b2b3..e92b8408b6f6 100644
--- a/drivers/usb/gadget/udc/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/udc/fsl_usb2_udc.h
@@ -554,7 +554,7 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length)
#endif
#define ERR(stuff...) pr_err("udc: " stuff)
-#define WARNING(stuff...) pr_warning("udc: " stuff)
+#define WARNING(stuff...) pr_warn("udc: " stuff)
#define INFO(stuff...) pr_info("udc: " stuff)
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c
index 6e977dc22570..de3e03483659 100644
--- a/drivers/usb/gadget/udc/m66592-udc.c
+++ b/drivers/usb/gadget/udc/m66592-udc.c
@@ -637,7 +637,7 @@ static void init_controller(struct m66592 *m66592)
clock = M66592_XTAL48;
break;
default:
- pr_warning("m66592-udc: xtal configuration error\n");
+ pr_warn("m66592-udc: xtal configuration error\n");
clock = 0;
}
@@ -649,7 +649,7 @@ static void init_controller(struct m66592 *m66592)
irq_sense = 0;
break;
default:
- pr_warning("m66592-udc: irq trigger config error\n");
+ pr_warn("m66592-udc: irq trigger config error\n");
irq_sense = 0;
}
diff --git a/drivers/usb/gadget/udc/omap_udc.h b/drivers/usb/gadget/udc/omap_udc.h
index cfadeb5fc5de..26974196cf44 100644
--- a/drivers/usb/gadget/udc/omap_udc.h
+++ b/drivers/usb/gadget/udc/omap_udc.h
@@ -187,7 +187,7 @@ struct omap_udc {
#endif
#define ERR(stuff...) pr_err("udc: " stuff)
-#define WARNING(stuff...) pr_warning("udc: " stuff)
+#define WARNING(stuff...) pr_warn("udc: " stuff)
#define INFO(stuff...) pr_info("udc: " stuff)
#define DBG(stuff...) pr_debug("udc: " stuff)
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.h b/drivers/usb/gadget/udc/pxa25x_udc.h
index 4b8b72d7ab37..a458bec2536d 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.h
+++ b/drivers/usb/gadget/udc/pxa25x_udc.h
@@ -248,7 +248,7 @@ dump_state(struct pxa25x_udc *dev)
#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0)
#define ERR(stuff...) pr_err("udc: " stuff)
-#define WARNING(stuff...) pr_warning("udc: " stuff)
+#define WARNING(stuff...) pr_warn("udc: " stuff)
#define INFO(stuff...) pr_info("udc: " stuff)
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 6cf82ee460a6..0f2b4b358e1a 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -147,7 +147,7 @@ static inline struct isp1362_ep_queue *get_ptd_queue(struct isp1362_hcd *isp1362
if (epq)
DBG(1, "%s: PTD $%04x is on %s queue\n", __func__, offset, epq->name);
else
- pr_warning("%s: invalid PTD $%04x\n", __func__, offset);
+ pr_warn("%s: invalid PTD $%04x\n", __func__, offset);
return epq;
}
@@ -157,8 +157,9 @@ static inline int get_ptd_offset(struct isp1362_ep_queue *epq, u8 index)
int offset;
if (index * epq->blk_size > epq->buf_size) {
- pr_warning("%s: Bad %s index %d(%d)\n", __func__, epq->name, index,
- epq->buf_size / epq->blk_size);
+ pr_warn("%s: Bad %s index %d(%d)\n",
+ __func__, epq->name, index,
+ epq->buf_size / epq->blk_size);
return -EINVAL;
}
offset = epq->buf_start + index * epq->blk_size;
@@ -902,8 +903,8 @@ static void start_iso_transfers(struct isp1362_hcd *isp1362_hcd)
ptd_offset = next_ptd(epq, ep);
if (ptd_offset < 0) {
- pr_warning("%s: req %d No more %s PTD buffers available\n", __func__,
- ep->num_req, epq->name);
+ pr_warn("%s: req %d No more %s PTD buffers available\n",
+ __func__, ep->num_req, epq->name);
break;
}
}
@@ -973,8 +974,8 @@ static void finish_transfers(struct isp1362_hcd *isp1362_hcd, unsigned long done
break;
}
if (done_map)
- pr_warning("%s: done_map not clear: %08lx:%08lx\n", __func__, done_map,
- epq->skip_map);
+ pr_warn("%s: done_map not clear: %08lx:%08lx\n",
+ __func__, done_map, epq->skip_map);
atomic_dec(&epq->finishing);
}
@@ -1433,7 +1434,7 @@ static int isp1362_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
} else
DBG(1, "%s: urb %p active; wait4irq\n", __func__, urb);
} else {
- pr_warning("%s: No EP in URB %p\n", __func__, urb);
+ pr_warn("%s: No EP in URB %p\n", __func__, urb);
retval = -EINVAL;
}
done:
@@ -1748,10 +1749,10 @@ static int isp1362_bus_suspend(struct usb_hcd *hcd)
/* FALL THROUGH */
case OHCI_USB_RESET:
status = -EBUSY;
- pr_warning("%s: needs reinit!\n", __func__);
+ pr_warn("%s: needs reinit!\n", __func__);
goto done;
case OHCI_USB_SUSPEND:
- pr_warning("%s: already suspended?\n", __func__);
+ pr_warn("%s: already suspended?\n", __func__);
goto done;
}
DBG(0, "%s: suspend root hub\n", __func__);
@@ -1839,7 +1840,7 @@ static int isp1362_bus_resume(struct usb_hcd *hcd)
isp1362_hcd->hc_control = isp1362_read_reg32(isp1362_hcd, HCCONTROL);
pr_info("%s: HCCONTROL: %08x\n", __func__, isp1362_hcd->hc_control);
if (hcd->state == HC_STATE_RESUMING) {
- pr_warning("%s: duplicate resume\n", __func__);
+ pr_warn("%s: duplicate resume\n", __func__);
status = 0;
} else
switch (isp1362_hcd->hc_control & OHCI_CTRL_HCFS) {
@@ -2474,8 +2475,8 @@ static int isp1362_chip_test(struct isp1362_hcd *isp1362_hcd)
__func__, offset);
break;
}
- pr_warning("%s: memory check with offset %02x ok after second read\n",
- __func__, offset);
+ pr_warn("%s: memory check with offset %02x ok after second read\n",
+ __func__, offset);
}
}
kfree(ref);
diff --git a/drivers/usb/isp1760/isp1760-if.c b/drivers/usb/isp1760/isp1760-if.c
index 9535b2872183..79205b31e4a9 100644
--- a/drivers/usb/isp1760/isp1760-if.c
+++ b/drivers/usb/isp1760/isp1760-if.c
@@ -197,7 +197,7 @@ static int isp1760_plat_probe(struct platform_device *pdev)
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq_res) {
- pr_warning("isp1760: IRQ resource not available\n");
+ pr_warn("isp1760: IRQ resource not available\n");
return -ENODEV;
}
irqflags = irq_res->flags & IRQF_TRIGGER_MASK;
--
2.10.0.rc2.1.g053435c
^ permalink raw reply related
* ARM juno R2 board USB Issue (EHCI probe failed)
From: Hanjun Guo @ 2016-09-27 16:13 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <37a463cb-86d5-e0d7-7e8f-50cec3d65c95@arm.com>
On 09/27/2016 05:07 PM, Sudeep Holla wrote:
>
>
> On 27/09/16 09:55, Sajjan, Vikas C wrote:
>> Hi Sudeep,
>>
>> -----Original Message-----
>> From: Sudeep Holla [mailto:sudeep.holla at arm.com]
>> Sent: Tuesday, September 27, 2016 2:21 PM
>> To: Vikas Sajjan <sajjan.linux@gmail.com>; linux-usb at vger.kernel.org;
>> linux-arm-kernel at lists.infradead.org; linux-acpi at vger.kernel.org
>> Cc: Sudeep Holla <sudeep.holla@arm.com>; mark.rutland at arm.com;
>> lorenzo.pieralisi at arm.com; Sajjan, Vikas C <vikas.cha.sajjan@hpe.com>
>> Subject: Re: ARM juno R2 board USB Issue (EHCI probe failed)
>>
>> Hi Vikas,
>>
>> On 27/09/16 09:14, Vikas Sajjan wrote:
>>> Adding USB mailing list.
>>>
>>>
>>> On Tue, Sep 27, 2016 at 12:33 PM, Sajjan, Vikas C
>>> <vikas.cha.sajjan@hpe.com> wrote:
>>>> Hi All,
>>>>
>>>> I working on ARM juno R2 board, with latest kernel 4.8.rc7 and I get
>>>> below USB EHCI probe error while booting with acpi=force.
>>>>
>>
>> Are you using the latest UEFI EDK2 ?
>> No, I am still using the UEFI binary which came as part of the Juno
>> board.
>>
>>
>>>> [ 1.223662] VFIO - User Level meta-driver version: 0.3
>>>> [ 1.229335] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
>>>> Driver
>>>> [ 1.235882] ehci-pci: EHCI PCI platform driver
>>>> [ 1.240359] ehci-platform: EHCI generic platform driver
>>>> [ 1.245619] ehci-platform ARMH0D20:00: Error: DMA mask
>>>> configuration failed
>>>> [ 1.272491] ehci-platform: probe of ARMH0D20:00 failed with error -5
>>>> [ 1.278876] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>>>> [ 1.285071] ohci-pci: OHCI PCI platform driver
>>>> [ 1.289548] ohci-platform: OHCI generic platform driver
>>>> [ 1.294884] usbcore: registered new interface driver usb-storage
>>>> [ 1.301231] mousedev: PS/2 mouse device common for all mice
>>>> [ 1.307197] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
>>>>
>>>> But this error goes off, if I don't force ACPI booting, i.e., if I
>>>> remove acpi=force from kernel command line , USB is detected and my
>>>> RFS which is in the usb drive, gets mounted successfully.
>>>>
>>
>> As I mentioned in private, I do get the same error if I drop _CCA in
>> USB object of ACPI DSDT. Can you give it a spin with latest UEFI ?
>>
>> Sure, will try with latest UEFI.
>>
>
> I bet that's 8-12 months old. It puts the banner during boot with the
> build date. You can try to follow [1] or access it from [2]
Agree.
D03 is using the same IP (EHCI) and the USB works fine with _CCA
in the device node.
Thanks
Hanjun
^ permalink raw reply
* [PATCH][v2] drm/sun4i: rgb: Enable panel after controller
From: Sean Paul @ 2016-09-27 16:05 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20160926102146.19129-1-net147@gmail.com>
On Mon, Sep 26, 2016 at 6:21 AM, Jonathan Liu <net147@gmail.com> wrote:
> The panel should be enabled after the controller so that we do not have
> visual glitches on the panel while the controller is setup. Similarly,
> the panel should be disabled before the controller.
>
> Signed-off-by: Jonathan Liu <net147@gmail.com>
Cool, this makes much more sense.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
I still think there's a problem with the bridge ops, though.
Sean
> ---
> Changes in v2:
> - Changed the commit message to be clearer
>
> drivers/gpu/drm/sun4i/sun4i_rgb.c | 14 ++++++++------
> 1 file changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c
> index c3ff10f..4e4bea6 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c
> @@ -152,15 +152,16 @@ static void sun4i_rgb_encoder_enable(struct drm_encoder *encoder)
>
> DRM_DEBUG_DRIVER("Enabling RGB output\n");
>
> - if (!IS_ERR(tcon->panel)) {
> + if (!IS_ERR(tcon->panel))
> drm_panel_prepare(tcon->panel);
> - drm_panel_enable(tcon->panel);
> - }
>
> /* encoder->bridge can be NULL; drm_bridge_enable checks for it */
> drm_bridge_enable(encoder->bridge);
>
> sun4i_tcon_channel_enable(tcon, 0);
> +
> + if (!IS_ERR(tcon->panel))
> + drm_panel_enable(tcon->panel);
> }
>
> static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder)
> @@ -171,15 +172,16 @@ static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder)
>
> DRM_DEBUG_DRIVER("Disabling RGB output\n");
>
> + if (!IS_ERR(tcon->panel))
> + drm_panel_disable(tcon->panel);
> +
> sun4i_tcon_channel_disable(tcon, 0);
>
> /* encoder->bridge can be NULL; drm_bridge_disable checks for it */
> drm_bridge_disable(encoder->bridge);
>
> - if (!IS_ERR(tcon->panel)) {
> - drm_panel_disable(tcon->panel);
> + if (!IS_ERR(tcon->panel))
> drm_panel_unprepare(tcon->panel);
> - }
> }
>
> static void sun4i_rgb_encoder_mode_set(struct drm_encoder *encoder,
> --
> 2.10.0
>
^ permalink raw reply
* next-20160927 build: 2 failures 4 warnings (next-20160927)
From: Mark Brown @ 2016-09-27 16:00 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <E1bop0x-0001YK-4h@optimist>
On Tue, Sep 27, 2016 at 10:49:27AM +0100, Build bot for Mark Brown wrote:
-next is still failing to build an arm and arm64 allmodconfig due to:
> arm64-allmodconfig
> ERROR: "irq_set_parent" [drivers/mfd/tps65217.ko] undefined!
> arm-allmodconfig
> ERROR: "irq_set_parent" [drivers/mfd/tps65217.ko] undefined!
due to 262d5cc6ceb293 (mfd: tps65217: Add support for IRQs) since
irq_set_parent() isn't exported. There was a fix posted adding the
export to the IRQ subsystem but it's still not been applied, the
function is being used in order to enable lazy IRQ disabling for
threaded interrupts:
https://www.spinics.net/lists/arm-kernel/msg532864.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 455 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160927/0a361488/attachment.sig>
^ permalink raw reply
* [PATCH] arm64: set path to Image.gz in the mkspec to avoid rpm build issue
From: Vadim Lomovtsev @ 2016-09-27 15:53 UTC (permalink / raw)
To: linux-arm-kernel
In addition to http://www.spinics.net/lists/arm-kernel/msg527466.html
While building rpm-pkg target it fails to copy kernel image
from default location to rpm buildroot directory.
Since we have arch variable set to aarch64 while Image.gz
is located at arch/arm64/boot it's necessary to specify
correct path to cp command as it implemeted for ppc64 build.
Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@caviumnetworks.com>
---
scripts/package/mkspec | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index 57673ba..2f2bc7e 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -101,9 +101,13 @@ echo "%ifarch ppc64"
echo "cp vmlinux arch/powerpc/boot"
echo "cp arch/powerpc/boot/"'$KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/vmlinuz-$KERNELRELEASE"
echo "%else"
+echo "%ifarch aarch64"
+echo "cp arch/arm64/boot/"'$KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/vmlinuz-$KERNELRELEASE"
+echo "%else"
echo 'cp $KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/vmlinuz-$KERNELRELEASE"
echo "%endif"
echo "%endif"
+echo "%endif"
echo 'make %{?_smp_mflags} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr KBUILD_SRC= headers_install'
echo 'cp System.map $RPM_BUILD_ROOT'"/boot/System.map-$KERNELRELEASE"
--
1.8.3.1
^ permalink raw reply related
* [PATCH v2 2/2] drm: zte: add initial vou drm driver
From: Sean Paul @ 2016-09-27 15:48 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1474727185-24180-3-git-send-email-shawn.guo@linaro.org>
On Sat, Sep 24, 2016 at 10:26 AM, Shawn Guo <shawn.guo@linaro.org> wrote:
> It adds the initial ZTE VOU display controller DRM driver. There are
> still some features to be added, like overlay plane, scaling, and more
> output devices support. But it's already useful with dual CRTCs and
> HDMI monitor working.
>
> It's been tested on Debian Jessie LXDE desktop with modesetting driver.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Hi Shawn,
I think overall this is very well done! A couple of things stuck out
to me, I've pointed them out below, hopefully you can use some of
them.
Sean
> ---
> drivers/gpu/drm/Kconfig | 2 +
> drivers/gpu/drm/Makefile | 1 +
> drivers/gpu/drm/zte/Kconfig | 8 +
> drivers/gpu/drm/zte/Makefile | 8 +
> drivers/gpu/drm/zte/zx_crtc.c | 691 +++++++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/zte/zx_crtc.h | 47 +++
> drivers/gpu/drm/zte/zx_drm_drv.c | 258 +++++++++++++++
> drivers/gpu/drm/zte/zx_drm_drv.h | 22 ++
> drivers/gpu/drm/zte/zx_hdmi.c | 540 ++++++++++++++++++++++++++++++
> drivers/gpu/drm/zte/zx_plane.c | 362 ++++++++++++++++++++
> drivers/gpu/drm/zte/zx_plane.h | 26 ++
> 11 files changed, 1965 insertions(+)
> create mode 100644 drivers/gpu/drm/zte/Kconfig
> create mode 100644 drivers/gpu/drm/zte/Makefile
> create mode 100644 drivers/gpu/drm/zte/zx_crtc.c
> create mode 100644 drivers/gpu/drm/zte/zx_crtc.h
> create mode 100644 drivers/gpu/drm/zte/zx_drm_drv.c
> create mode 100644 drivers/gpu/drm/zte/zx_drm_drv.h
> create mode 100644 drivers/gpu/drm/zte/zx_hdmi.c
> create mode 100644 drivers/gpu/drm/zte/zx_plane.c
> create mode 100644 drivers/gpu/drm/zte/zx_plane.h
>
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 483059a22b1b..a91f8cecbe0f 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -223,6 +223,8 @@ source "drivers/gpu/drm/hisilicon/Kconfig"
>
> source "drivers/gpu/drm/mediatek/Kconfig"
>
> +source "drivers/gpu/drm/zte/Kconfig"
> +
> # Keep legacy drivers last
>
> menuconfig DRM_LEGACY
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 439d89b25ae0..fe461c94d266 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -85,3 +85,4 @@ obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu/
> obj-$(CONFIG_DRM_ETNAVIV) += etnaviv/
> obj-$(CONFIG_DRM_ARCPGU)+= arc/
> obj-y += hisilicon/
> +obj-$(CONFIG_DRM_ZTE) += zte/
> diff --git a/drivers/gpu/drm/zte/Kconfig b/drivers/gpu/drm/zte/Kconfig
> new file mode 100644
> index 000000000000..4065b2840f1c
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/Kconfig
> @@ -0,0 +1,8 @@
> +config DRM_ZTE
> + tristate "DRM Support for ZTE SoCs"
> + depends on DRM && ARCH_ZX
> + select DRM_KMS_CMA_HELPER
> + select DRM_KMS_FB_HELPER
> + select DRM_KMS_HELPER
> + help
> + Choose this option to enable DRM on ZTE ZX SoCs.
> diff --git a/drivers/gpu/drm/zte/Makefile b/drivers/gpu/drm/zte/Makefile
> new file mode 100644
> index 000000000000..b40968dc749f
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/Makefile
> @@ -0,0 +1,8 @@
> +zxdrm-y := \
> + zx_drm_drv.o \
> + zx_crtc.o \
> + zx_plane.o \
> + zx_hdmi.o
> +
> +obj-$(CONFIG_DRM_ZTE) += zxdrm.o
> +
> diff --git a/drivers/gpu/drm/zte/zx_crtc.c b/drivers/gpu/drm/zte/zx_crtc.c
I was a little tripped up when I first read this file since I assumed
there was one instance of this driver per-crtc. However, there's
really N crtcs per driver. Might it be less confusing to call it
zx_vou.c instead?
> new file mode 100644
> index 000000000000..818bf9072573
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_crtc.c
> @@ -0,0 +1,691 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_plane_helper.h>
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/of_address.h>
> +#include <video/videomode.h>
> +
> +#include "zx_drm_drv.h"
> +#include "zx_crtc.h"
> +#include "zx_plane.h"
> +
> +/* OSD (GPC_GLOBAL) registers */
> +#define OSD_INT_STA 0x04
> +#define OSD_INT_CLRSTA 0x08
> +#define OSD_INT_MSK 0x0c
> +#define OSD_INT_AUX_UPT BIT(14)
> +#define OSD_INT_MAIN_UPT BIT(13)
> +#define OSD_INT_GL1_LBW BIT(10)
> +#define OSD_INT_GL0_LBW BIT(9)
> +#define OSD_INT_VL2_LBW BIT(8)
> +#define OSD_INT_VL1_LBW BIT(7)
> +#define OSD_INT_VL0_LBW BIT(6)
> +#define OSD_INT_BUS_ERR BIT(3)
> +#define OSD_INT_CFG_ERR BIT(2)
> +#define OSD_INT_ERROR (\
> + OSD_INT_GL1_LBW | OSD_INT_GL0_LBW | \
> + OSD_INT_VL2_LBW | OSD_INT_VL1_LBW | OSD_INT_VL0_LBW | \
> + OSD_INT_BUS_ERR | OSD_INT_CFG_ERR \
> +)
> +#define OSD_INT_ENABLE (OSD_INT_ERROR | OSD_INT_AUX_UPT | OSD_INT_MAIN_UPT)
> +#define OSD_CTRL0 0x10
> +#define OSD_CTRL0_GL0_EN BIT(7)
> +#define OSD_CTRL0_GL0_SEL BIT(6)
> +#define OSD_CTRL0_GL1_EN BIT(5)
> +#define OSD_CTRL0_GL1_SEL BIT(4)
> +#define OSD_RST_CLR 0x1c
> +#define RST_PER_FRAME BIT(19)
> +
> +/* Main/Aux channel registers */
> +#define OSD_MAIN_CHN 0x470
> +#define OSD_AUX_CHN 0x4d0
> +#define CHN_CTRL0 0x00
> +#define CHN_ENABLE BIT(0)
> +#define CHN_CTRL1 0x04
> +#define CHN_SCREEN_W_SHIFT 18
> +#define CHN_SCREEN_W_MASK (0x1fff << CHN_SCREEN_W_SHIFT)
> +#define CHN_SCREEN_H_SHIFT 5
> +#define CHN_SCREEN_H_MASK (0x1fff << CHN_SCREEN_H_SHIFT)
> +#define CHN_UPDATE 0x08
> +
> +/* TIMING_CTRL registers */
> +#define TIMING_TC_ENABLE 0x04
> +#define AUX_TC_EN BIT(1)
> +#define MAIN_TC_EN BIT(0)
> +#define FIR_MAIN_ACTIVE 0x08
> +#define FIR_AUX_ACTIVE 0x0c
> +#define FIR_MAIN_H_TIMING 0x10
> +#define FIR_MAIN_V_TIMING 0x14
> +#define FIR_AUX_H_TIMING 0x18
> +#define FIR_AUX_V_TIMING 0x1c
> +#define SYNC_WIDE_SHIFT 22
> +#define SYNC_WIDE_MASK (0x3ff << SYNC_WIDE_SHIFT)
> +#define BACK_PORCH_SHIFT 11
> +#define BACK_PORCH_MASK (0x7ff << BACK_PORCH_SHIFT)
> +#define FRONT_PORCH_SHIFT 0
> +#define FRONT_PORCH_MASK (0x7ff << FRONT_PORCH_SHIFT)
> +#define TIMING_CTRL 0x20
> +#define AUX_POL_SHIFT 3
> +#define AUX_POL_MASK (0x7 << AUX_POL_SHIFT)
> +#define MAIN_POL_SHIFT 0
> +#define MAIN_POL_MASK (0x7 << MAIN_POL_SHIFT)
> +#define POL_DE_SHIFT 2
> +#define POL_VSYNC_SHIFT 1
> +#define POL_HSYNC_SHIFT 0
> +#define TIMING_INT_CTRL 0x24
> +#define TIMING_INT_STATE 0x28
> +#define TIMING_INT_AUX_FRAME BIT(3)
> +#define TIMING_INT_MAIN_FRAME BIT(1)
> +#define TIMING_INT_AUX_FRAME_SEL_VSW (0x2 << 10)
> +#define TIMING_INT_MAIN_FRAME_SEL_VSW (0x2 << 6)
> +#define TIMING_INT_ENABLE (\
> + TIMING_INT_MAIN_FRAME_SEL_VSW | TIMING_INT_AUX_FRAME_SEL_VSW | \
> + TIMING_INT_MAIN_FRAME | TIMING_INT_AUX_FRAME \
> +)
> +#define TIMING_MAIN_SHIFT 0x2c
> +#define TIMING_AUX_SHIFT 0x30
> +#define H_SHIFT_VAL 0x0048
> +#define TIMING_MAIN_PI_SHIFT 0x68
> +#define TIMING_AUX_PI_SHIFT 0x6c
> +#define H_PI_SHIFT_VAL 0x000f
> +
> +/* DTRC registers */
> +#define DTRC_F0_CTRL 0x2c
> +#define DTRC_F1_CTRL 0x5c
> +#define DTRC_DECOMPRESS_BYPASS BIT(17)
> +#define DTRC_DETILE_CTRL 0x68
> +#define TILE2RASTESCAN_BYPASS_MODE BIT(30)
> +#define DETILE_ARIDR_MODE_MASK (0x3 << 0)
> +#define DETILE_ARID_ALL 0
> +#define DETILE_ARID_IN_ARIDR 1
> +#define DETILE_ARID_BYP_BUT_ARIDR 2
> +#define DETILE_ARID_IN_ARIDR2 3
> +#define DTRC_ARID 0x6c
> +#define DTRC_DEC2DDR_ARID 0x70
> +
> +/* VOU_CTRL registers */
> +#define VOU_INF_EN 0x00
> +#define VOU_INF_CH_SEL 0x04
> +#define VOU_INF_DATA_SEL 0x08
> +#define VOU_SOFT_RST 0x14
> +#define VOU_CLK_SEL 0x18
> +#define VOU_CLK_GL1_SEL BIT(5)
> +#define VOU_CLK_GL0_SEL BIT(4)
> +#define VOU_CLK_REQEN 0x20
> +#define VOU_CLK_EN 0x24
> +
> +/* OTFPPU_CTRL registers */
> +#define OTFPPU_RSZ_DATA_SOURCE 0x04
> +
> +#define GL_NUM 2
> +#define VL_NUM 3
> +
> +enum vou_chn_type {
> + VOU_CHN_MAIN,
> + VOU_CHN_AUX,
> +};
> +
> +struct zx_crtc {
> + struct drm_crtc crtc;
> + struct drm_plane *primary;
> + struct device *dev;
> + void __iomem *chnreg;
> + enum vou_chn_type chn_type;
> + struct clk *pixclk;
> +};
> +
> +#define to_zx_crtc(x) container_of(crtc, struct zx_crtc, crtc)
> +
> +struct zx_vou_hw {
> + struct device *dev;
> + void __iomem *osd;
> + void __iomem *timing;
> + void __iomem *vouctl;
> + void __iomem *otfppu;
> + void __iomem *dtrc;
> + struct clk *axi_clk;
> + struct clk *ppu_clk;
> + struct clk *main_clk;
> + struct clk *aux_clk;
> + struct zx_crtc *main_crtc;
> + struct zx_crtc *aux_crtc;
> +};
> +
> +static inline bool is_main_crtc(struct drm_crtc *crtc)
> +{
> + struct zx_crtc *zcrtc = to_zx_crtc(crtc);
> +
> + return zcrtc->chn_type == VOU_CHN_MAIN;
> +}
> +
> +void vou_inf_enable(struct vou_inf *inf)
> +{
> + struct drm_encoder *encoder = inf->encoder;
> + struct drm_device *drm = encoder->dev;
> + struct zx_drm_private *priv = drm->dev_private;
> + struct zx_vou_hw *vou = priv->vou;
> + bool is_main = is_main_crtc(encoder->crtc);
> + u32 data_sel_shift = inf->id << 1;
> + u32 val;
> +
> + /* Select data format */
> + val = readl(vou->vouctl + VOU_INF_DATA_SEL);
> + val &= ~(0x3 << data_sel_shift);
> + val |= inf->data_sel << data_sel_shift;
> + writel(val, vou->vouctl + VOU_INF_DATA_SEL);
> +
> + /* Select channel */
> + val = readl(vou->vouctl + VOU_INF_CH_SEL);
> + if (is_main)
> + val &= ~(1 << inf->id);
> + else
> + val |= 1 << inf->id;
> + writel(val, vou->vouctl + VOU_INF_CH_SEL);
> +
> + /* Select interface clocks */
> + val = readl(vou->vouctl + VOU_CLK_SEL);
> + if (is_main)
> + val &= ~inf->clocks_sel_bits;
> + else
> + val |= inf->clocks_sel_bits;
> + writel(val, vou->vouctl + VOU_CLK_SEL);
> +
> + /* Enable interface clocks */
> + val = readl(vou->vouctl + VOU_CLK_EN);
> + val |= inf->clocks_en_bits;
> + writel(val, vou->vouctl + VOU_CLK_EN);
> +
> + /* Enable the device */
> + val = readl(vou->vouctl + VOU_INF_EN);
> + val |= 1 << inf->id;
> + writel(val, vou->vouctl + VOU_INF_EN);
> +}
> +
> +void vou_inf_disable(struct vou_inf *inf)
> +{
> + struct drm_encoder *encoder = inf->encoder;
> + struct drm_device *drm = encoder->dev;
> + struct zx_drm_private *priv = drm->dev_private;
> + struct zx_vou_hw *vou = priv->vou;
> + u32 val;
> +
> + /* Disable the device */
> + val = readl(vou->vouctl + VOU_INF_EN);
> + val &= ~(1 << inf->id);
> + writel(val, vou->vouctl + VOU_INF_EN);
> +
> + /* Disable interface clocks */
> + val = readl(vou->vouctl + VOU_CLK_EN);
> + val &= ~inf->clocks_en_bits;
> + writel(val, vou->vouctl + VOU_CLK_EN);
> +}
> +
> +static inline void vou_chn_set_update(struct zx_crtc *zcrtc)
> +{
> + writel(1, zcrtc->chnreg + CHN_UPDATE);
> +}
> +
> +static void zx_crtc_enable(struct drm_crtc *crtc)
> +{
> + struct drm_display_mode *mode = &crtc->state->adjusted_mode;
> + struct zx_crtc *zcrtc = to_zx_crtc(crtc);
> + struct zx_vou_hw *vou = dev_get_drvdata(zcrtc->dev);
IMO, it would be better to store a pointer to vou in each zx_crtc
rather than reaching into drvdata.
> + bool is_main = is_main_crtc(crtc);
> + struct videomode vm;
> + u32 pol = 0;
> + u32 val;
> +
> + drm_display_mode_to_videomode(mode, &vm);
Why do this conversion? You should be able to get everything you need
from drm_display_mode
> +
> + /* Set up timing parameters */
> + val = (vm.vactive - 1) << 16;
> + val |= (vm.hactive - 1) & 0xffff;
> + writel(val, vou->timing + (is_main ? FIR_MAIN_ACTIVE : FIR_AUX_ACTIVE));
> +
> + val = ((vm.hsync_len - 1) << SYNC_WIDE_SHIFT) & SYNC_WIDE_MASK;
> + val |= ((vm.hback_porch - 1) << BACK_PORCH_SHIFT) & BACK_PORCH_MASK;
> + val |= ((vm.hfront_porch - 1) << FRONT_PORCH_SHIFT) & FRONT_PORCH_MASK;
> + writel(val, vou->timing + (is_main ? FIR_MAIN_H_TIMING :
> + FIR_AUX_H_TIMING));
> +
> + val = ((vm.vsync_len - 1) << SYNC_WIDE_SHIFT) & SYNC_WIDE_MASK;
> + val |= ((vm.vback_porch - 1) << BACK_PORCH_SHIFT) & BACK_PORCH_MASK;
> + val |= ((vm.vfront_porch - 1) << FRONT_PORCH_SHIFT) & FRONT_PORCH_MASK;
> + writel(val, vou->timing + (is_main ? FIR_MAIN_V_TIMING :
> + FIR_AUX_V_TIMING));
It would be nice to figure out a better way of handing the main/aux
switch as opposed to sprinkling all of these inline conditionals
around. Perhaps you could introduce a struct which stores the
addresses per-crtc and then reference the struct in the driver as
opposed to the #defines.
ie:
writel(val, vou->timing + zcrtc->regs->v_timing);
> +
> + /* Set up polarities */
> + if (vm.flags & DISPLAY_FLAGS_VSYNC_LOW)
> + pol |= 1 << POL_VSYNC_SHIFT;
> + if (vm.flags & DISPLAY_FLAGS_HSYNC_LOW)
> + pol |= 1 << POL_HSYNC_SHIFT;
> +
> + val = readl(vou->timing + TIMING_CTRL);
> + val &= ~(is_main ? MAIN_POL_MASK : AUX_POL_MASK);
> + val |= pol << (is_main ? MAIN_POL_SHIFT : AUX_POL_SHIFT);
> + writel(val, vou->timing + TIMING_CTRL);
> +
> + /* Setup SHIFT register by following what ZTE BSP does */
> + writel(H_SHIFT_VAL, vou->timing + (is_main ? TIMING_MAIN_SHIFT :
> + TIMING_AUX_SHIFT));
> + writel(H_PI_SHIFT_VAL, vou->timing + (is_main ? TIMING_MAIN_PI_SHIFT :
> + TIMING_AUX_PI_SHIFT));
> +
> + /* Enable TIMING_CTRL */
> + val = readl(vou->timing + TIMING_TC_ENABLE);
> + val |= is_main ? MAIN_TC_EN : AUX_TC_EN;
> + writel(val, vou->timing + TIMING_TC_ENABLE);
> +
> + /* Configure channel screen size */
> + val = readl(zcrtc->chnreg + CHN_CTRL1);
> + val &= ~(CHN_SCREEN_W_MASK | CHN_SCREEN_H_MASK);
> + val |= (vm.hactive << CHN_SCREEN_W_SHIFT) & CHN_SCREEN_W_MASK;
> + val |= (vm.vactive << CHN_SCREEN_H_SHIFT) & CHN_SCREEN_H_MASK;
> + writel(val, zcrtc->chnreg + CHN_CTRL1);
> +
> + /* Update channel */
> + vou_chn_set_update(zcrtc);
> +
> + /* Enable channel */
> + val = readl(zcrtc->chnreg + CHN_CTRL0);
> + val |= CHN_ENABLE;
> + writel(val, zcrtc->chnreg + CHN_CTRL0);
> +
> + /* Enable Graphic Layer */
> + val = readl(vou->osd + OSD_CTRL0);
> + val |= is_main ? OSD_CTRL0_GL0_EN : OSD_CTRL0_GL1_EN;
> + writel(val, vou->osd + OSD_CTRL0);
> +
> + drm_crtc_vblank_on(crtc);
> +
> + /* Enable pixel clock */
> + clk_set_rate(zcrtc->pixclk, mode->clock * 1000);
> + clk_prepare_enable(zcrtc->pixclk);
> +}
> +
> +static void zx_crtc_disable(struct drm_crtc *crtc)
> +{
> + struct zx_crtc *zcrtc = to_zx_crtc(crtc);
> + struct zx_vou_hw *vou = dev_get_drvdata(zcrtc->dev);
> + bool is_main = is_main_crtc(crtc);
> + u32 val;
> +
> + clk_disable_unprepare(zcrtc->pixclk);
> +
> + drm_crtc_vblank_off(crtc);
> +
> + /* Disable Graphic Layer */
> + val = readl(vou->osd + OSD_CTRL0);
> + val &= ~(is_main ? OSD_CTRL0_GL0_EN : OSD_CTRL0_GL1_EN);
> + writel(val, vou->osd + OSD_CTRL0);
> +
> + /* Disable channel */
> + val = readl(zcrtc->chnreg + CHN_CTRL0);
> + val &= ~CHN_ENABLE;
> + writel(val, zcrtc->chnreg + CHN_CTRL0);
> +
> + /* Disable TIMING_CTRL */
> + val = readl(vou->timing + TIMING_TC_ENABLE);
> + val &= ~(is_main ? MAIN_TC_EN : AUX_TC_EN);
> + writel(val, vou->timing + TIMING_TC_ENABLE);
> +}
> +
> +static void zx_crtc_atomic_begin(struct drm_crtc *crtc,
> + struct drm_crtc_state *state)
> +{
> + struct drm_pending_vblank_event *event = crtc->state->event;
> +
> + if (event) {
nit: you can save yourself a level of indentation by exiting early on
!event instead of scoping the entire function on event.
> + crtc->state->event = NULL;
> +
> + spin_lock_irq(&crtc->dev->event_lock);
> + if (drm_crtc_vblank_get(crtc) == 0)
> + drm_crtc_arm_vblank_event(crtc, event);
> + else
> + drm_crtc_send_vblank_event(crtc, event);
> + spin_unlock_irq(&crtc->dev->event_lock);
> + }
> +}
> +
> +static const struct drm_crtc_helper_funcs zx_crtc_helper_funcs = {
> + .enable = zx_crtc_enable,
> + .disable = zx_crtc_disable,
> + .atomic_begin = zx_crtc_atomic_begin,
> +};
> +
> +static const struct drm_crtc_funcs zx_crtc_funcs = {
> + .destroy = drm_crtc_cleanup,
> + .set_config = drm_atomic_helper_set_config,
> + .page_flip = drm_atomic_helper_page_flip,
> + .reset = drm_atomic_helper_crtc_reset,
> + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> +};
> +
> +static struct zx_crtc *zx_crtc_init(struct drm_device *drm,
> + enum vou_chn_type chn_type)
> +{
> + struct zx_drm_private *priv = drm->dev_private;
> + struct zx_vou_hw *vou = priv->vou;
> + struct device *dev = vou->dev;
> + struct zx_layer_data data;
> + struct zx_crtc *zcrtc;
> + int ret;
> +
> + zcrtc = devm_kzalloc(dev, sizeof(*zcrtc), GFP_KERNEL);
> + if (!zcrtc)
> + return ERR_PTR(-ENOMEM);
> +
> + zcrtc->dev = dev;
> + zcrtc->chn_type = chn_type;
> +
> + if (chn_type == VOU_CHN_MAIN) {
> + data.layer = vou->osd + 0x130;
> + data.csc = vou->osd + 0x580;
> + data.hbsc = vou->osd + 0x820;
> + data.rsz = vou->otfppu + 0x600;
> + zcrtc->chnreg = vou->osd + OSD_MAIN_CHN;
> + } else {
> + data.layer = vou->osd + 0x200;
> + data.csc = vou->osd + 0x5d0;
> + data.hbsc = vou->osd + 0x860;
> + data.rsz = vou->otfppu + 0x800;
> + zcrtc->chnreg = vou->osd + OSD_AUX_CHN;
> + }
These magic values should find their way into #defines
> +
> + zcrtc->pixclk = devm_clk_get(dev, (chn_type == VOU_CHN_MAIN) ?
> + "main_wclk" : "aux_wclk");
> + if (IS_ERR(zcrtc->pixclk))
> + return ERR_PTR(PTR_ERR(zcrtc->pixclk));
> +
> + zcrtc->primary = zx_plane_init(drm, dev, &data, DRM_PLANE_TYPE_PRIMARY);
> + if (IS_ERR(zcrtc->primary))
> + return ERR_PTR(PTR_ERR(zcrtc->primary));
> +
> + ret = drm_crtc_init_with_planes(drm, &zcrtc->crtc, zcrtc->primary, NULL,
> + &zx_crtc_funcs, NULL);
> + if (ret)
> + return ERR_PTR(ret);
> +
> + drm_crtc_helper_add(&zcrtc->crtc, &zx_crtc_helper_funcs);
> +
> + return zcrtc;
> +}
> +
> +int zx_crtc_enable_vblank(struct drm_device *drm, unsigned int pipe)
> +{
> + struct zx_drm_private *priv = drm->dev_private;
> + struct zx_vou_hw *vou = priv->vou;
> + u32 intctl;
> +
> + intctl = readl(vou->timing + TIMING_INT_CTRL);
> + if (pipe == 0)
> + intctl |= TIMING_INT_MAIN_FRAME;
> + else
> + intctl |= TIMING_INT_AUX_FRAME;
> + writel(intctl, vou->timing + TIMING_INT_CTRL);
> +
> + return 0;
> +}
> +
> +void zx_crtc_disable_vblank(struct drm_device *drm, unsigned int pipe)
> +{
> + struct zx_drm_private *priv = drm->dev_private;
> + struct zx_vou_hw *vou = priv->vou;
> + u32 intctl;
> +
> + intctl = readl(vou->timing + TIMING_INT_CTRL);
> + if (pipe == 0)
> + intctl &= ~TIMING_INT_MAIN_FRAME;
> + else
> + intctl &= ~TIMING_INT_AUX_FRAME;
> + writel(intctl, vou->timing + TIMING_INT_CTRL);
> +}
> +
> +static irqreturn_t vou_irq_handler(int irq, void *dev_id)
> +{
> + struct zx_vou_hw *vou = dev_id;
> + u32 state;
> +
> + /* Handle TIMING_CTRL frame interrupts */
> + state = readl(vou->timing + TIMING_INT_STATE);
> + writel(state, vou->timing + TIMING_INT_STATE);
> +
> + if (state & TIMING_INT_MAIN_FRAME)
> + drm_crtc_handle_vblank(&vou->main_crtc->crtc);
> +
> + if (state & TIMING_INT_AUX_FRAME)
> + drm_crtc_handle_vblank(&vou->aux_crtc->crtc);
> +
> + /* Handle OSD interrupts */
> + state = readl(vou->osd + OSD_INT_STA);
> + writel(state, vou->osd + OSD_INT_CLRSTA);
> +
> + if (state & OSD_INT_MAIN_UPT) {
> + vou_chn_set_update(vou->main_crtc);
> + zx_plane_set_update(vou->main_crtc->primary);
> + }
> +
> + if (state & OSD_INT_AUX_UPT) {
> + vou_chn_set_update(vou->aux_crtc);
> + zx_plane_set_update(vou->aux_crtc->primary);
> + }
> +
> + if (state & OSD_INT_ERROR)
> + dev_err(vou->dev, "OSD ERROR: 0x%08x!\n", state);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void vou_dtrc_init(struct zx_vou_hw *vou)
> +{
> + u32 val;
> +
> + val = readl(vou->dtrc + DTRC_DETILE_CTRL);
> + /* Clear bit for bypass by ID */
> + val &= ~TILE2RASTESCAN_BYPASS_MODE;
> + /* Select ARIDR mode */
> + val &= ~DETILE_ARIDR_MODE_MASK;
> + val |= DETILE_ARID_IN_ARIDR;
> + writel(val, vou->dtrc + DTRC_DETILE_CTRL);
> +
> + /* Bypass decompression for both frames */
> + val = readl(vou->dtrc + DTRC_F0_CTRL);
> + val |= DTRC_DECOMPRESS_BYPASS;
> + writel(val, vou->dtrc + DTRC_F0_CTRL);
> +
> + val = readl(vou->dtrc + DTRC_F1_CTRL);
> + val |= DTRC_DECOMPRESS_BYPASS;
> + writel(val, vou->dtrc + DTRC_F1_CTRL);
> +
> + /* Set up ARID register */
> + val = 0x0e;
> + val |= 0x0f << 8;
> + val |= 0x0e << 16;
> + val |= 0x0f << 24;
#define
> + writel(val, vou->dtrc + DTRC_ARID);
> +
> + /* Set up DEC2DDR_ARID register */
> + val = 0x0e;
> + val |= 0x0f << 8;
> + writel(val, vou->dtrc + DTRC_DEC2DDR_ARID);
> +}
> +
> +static void vou_hw_init(struct zx_vou_hw *vou)
> +{
> + u32 val;
> +
> + /* Set GL0 to main channel and GL1 to aux channel */
> + val = readl(vou->osd + OSD_CTRL0);
> + val &= ~OSD_CTRL0_GL0_SEL;
> + val |= OSD_CTRL0_GL1_SEL;
> + writel(val, vou->osd + OSD_CTRL0);
> +
> + /* Release reset for all VOU modules */
> + writel(~0, vou->vouctl + VOU_SOFT_RST);
> +
> + /* Select main clock for GL0 and aux clock for GL1 module */
> + val = readl(vou->vouctl + VOU_CLK_SEL);
> + val &= ~VOU_CLK_GL0_SEL;
> + val |= VOU_CLK_GL1_SEL;
> + writel(val, vou->vouctl + VOU_CLK_SEL);
> +
> + /* Enable clock auto-gating for all VOU modules */
> + writel(~0, vou->vouctl + VOU_CLK_REQEN);
> +
> + /* Enable all VOU module clocks */
> + writel(~0, vou->vouctl + VOU_CLK_EN);
> +
> + /* Clear both OSD and TIMING_CTRL interrupt state */
> + writel(~0, vou->osd + OSD_INT_CLRSTA);
> + writel(~0, vou->timing + TIMING_INT_STATE);
> +
> + /* Enable OSD and TIMING_CTRL interrrupts */
> + writel(OSD_INT_ENABLE, vou->osd + OSD_INT_MSK);
> + writel(TIMING_INT_ENABLE, vou->timing + TIMING_INT_CTRL);
> +
> + /* Select GPC as input to gl/vl scaler as a sane default setting */
> + writel(0x2a, vou->otfppu + OTFPPU_RSZ_DATA_SOURCE);
> +
> + /*
> + * Needs to reset channel and layer logic per frame when frame starts
> + * to get VOU work properly.
> + */
> + val = readl(vou->osd + OSD_RST_CLR);
> + val |= RST_PER_FRAME;
> + writel(val, vou->osd + OSD_RST_CLR);
> +
> + vou_dtrc_init(vou);
> +}
> +
> +static int zx_crtc_bind(struct device *dev, struct device *master, void *data)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct drm_device *drm = data;
> + struct zx_drm_private *priv = drm->dev_private;
> + struct resource *res;
> + struct zx_vou_hw *vou;
> + int irq;
> + int ret;
> +
> + vou = devm_kzalloc(dev, sizeof(*vou), GFP_KERNEL);
> + if (!vou)
> + return -ENOMEM;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "osd");
> + vou->osd = devm_ioremap_resource(dev, res);
> + if (IS_ERR(vou->osd))
> + return PTR_ERR(vou->osd);
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "timing_ctrl");
> + vou->timing = devm_ioremap_resource(dev, res);
> + if (IS_ERR(vou->timing))
> + return PTR_ERR(vou->timing);
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dtrc");
> + vou->dtrc = devm_ioremap_resource(dev, res);
> + if (IS_ERR(vou->dtrc))
> + return PTR_ERR(vou->dtrc);
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vou_ctrl");
> + vou->vouctl = devm_ioremap_resource(dev, res);
> + if (IS_ERR(vou->vouctl))
> + return PTR_ERR(vou->vouctl);
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otfppu");
> + vou->otfppu = devm_ioremap_resource(dev, res);
> + if (IS_ERR(vou->otfppu))
> + return PTR_ERR(vou->otfppu);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return irq;
> +
> + vou->axi_clk = devm_clk_get(dev, "aclk");
> + if (IS_ERR(vou->axi_clk))
> + return PTR_ERR(vou->axi_clk);
> +
> + vou->ppu_clk = devm_clk_get(dev, "ppu_wclk");
> + if (IS_ERR(vou->ppu_clk))
> + return PTR_ERR(vou->ppu_clk);
> +
> + clk_prepare_enable(vou->axi_clk);
> + clk_prepare_enable(vou->ppu_clk);
> +
> + vou->dev = dev;
> + priv->vou = vou;
> + dev_set_drvdata(dev, vou);
I think you should be able to avoid storing vou in priv and drvdata.
> +
> + vou_hw_init(vou);
> +
> + ret = devm_request_irq(dev, irq, vou_irq_handler, 0, "zx_vou", vou);
> + if (ret < 0)
> + return ret;
> +
> + vou->main_crtc = zx_crtc_init(drm, VOU_CHN_MAIN);
> + if (IS_ERR(vou->main_crtc))
> + return PTR_ERR(vou->main_crtc);
> +
> + vou->aux_crtc = zx_crtc_init(drm, VOU_CHN_AUX);
> + if (IS_ERR(vou->aux_crtc))
> + return PTR_ERR(vou->aux_crtc);
> +
> + return 0;
> +}
> +
> +static void zx_crtc_unbind(struct device *dev, struct device *master,
> + void *data)
> +{
> + struct zx_vou_hw *vou = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(vou->axi_clk);
> + clk_disable_unprepare(vou->ppu_clk);
> +}
> +
> +static const struct component_ops zx_crtc_component_ops = {
> + .bind = zx_crtc_bind,
> + .unbind = zx_crtc_unbind,
> +};
> +
> +static int zx_crtc_probe(struct platform_device *pdev)
> +{
> + return component_add(&pdev->dev, &zx_crtc_component_ops);
> +}
> +
> +static int zx_crtc_remove(struct platform_device *pdev)
> +{
> + component_del(&pdev->dev, &zx_crtc_component_ops);
> + return 0;
> +}
> +
> +static const struct of_device_id zx_crtc_of_match[] = {
> + { .compatible = "zte,zx296718-dpc", },
> + { /* end */ },
> +};
> +MODULE_DEVICE_TABLE(of, zx_crtc_of_match);
> +
> +struct platform_driver zx_crtc_driver = {
> + .probe = zx_crtc_probe,
> + .remove = zx_crtc_remove,
> + .driver = {
> + .name = "zx-crtc",
> + .of_match_table = zx_crtc_of_match,
> + },
> +};
> diff --git a/drivers/gpu/drm/zte/zx_crtc.h b/drivers/gpu/drm/zte/zx_crtc.h
> new file mode 100644
> index 000000000000..f889208054ce
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_crtc.h
> @@ -0,0 +1,47 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __ZX_CRTC_H__
> +#define __ZX_CRTC_H__
> +
> +#define VOU_CRTC_MASK 0x3
> +
> +/* VOU output interfaces */
> +enum vou_inf_id {
> + VOU_HDMI = 0,
> + VOU_RGB_LCD = 1,
> + VOU_TV_ENC = 2,
> + VOU_MIPI_DSI = 3,
> + VOU_LVDS = 4,
> + VOU_VGA = 5,
> +};
> +
> +enum vou_inf_data_sel {
> + VOU_YUV444 = 0,
> + VOU_RGB_101010 = 1,
> + VOU_RGB_888 = 2,
> + VOU_RGB_666 = 3,
> +};
> +
> +struct vou_inf {
> + struct drm_encoder *encoder;
> + enum vou_inf_id id;
> + enum vou_inf_data_sel data_sel;
> + u32 clocks_en_bits;
> + u32 clocks_sel_bits;
> +};
> +
> +void vou_inf_enable(struct vou_inf *inf);
> +void vou_inf_disable(struct vou_inf *inf);
> +
> +int zx_crtc_enable_vblank(struct drm_device *drm, unsigned int pipe);
> +void zx_crtc_disable_vblank(struct drm_device *drm, unsigned int pipe);
> +
> +#endif /* __ZX_CRTC_H__ */
> diff --git a/drivers/gpu/drm/zte/zx_drm_drv.c b/drivers/gpu/drm/zte/zx_drm_drv.c
> new file mode 100644
> index 000000000000..51fafb8e5f43
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_drm_drv.c
> @@ -0,0 +1,258 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/spinlock.h>
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/list.h>
> +#include <linux/of_graph.h>
> +#include <linux/of_platform.h>
nit: Alphabetical?
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_of.h>
> +
> +#include "zx_drm_drv.h"
> +#include "zx_crtc.h"
> +
> +static void zx_drm_fb_output_poll_changed(struct drm_device *drm)
> +{
> + struct zx_drm_private *priv = drm->dev_private;
> +
> + drm_fbdev_cma_hotplug_event(priv->fbdev);
> +}
> +
> +static const struct drm_mode_config_funcs zx_drm_mode_config_funcs = {
> + .fb_create = drm_fb_cma_create,
> + .output_poll_changed = zx_drm_fb_output_poll_changed,
> + .atomic_check = drm_atomic_helper_check,
> + .atomic_commit = drm_atomic_helper_commit,
> +};
> +
> +static void zx_drm_lastclose(struct drm_device *drm)
> +{
> + struct zx_drm_private *priv = drm->dev_private;
> +
> + drm_fbdev_cma_restore_mode(priv->fbdev);
> +}
> +
> +static const struct file_operations zx_drm_fops = {
> + .owner = THIS_MODULE,
> + .open = drm_open,
> + .release = drm_release,
> + .unlocked_ioctl = drm_ioctl,
> +#ifdef CONFIG_COMPAT
> + .compat_ioctl = drm_compat_ioctl,
> +#endif
> + .poll = drm_poll,
> + .read = drm_read,
> + .llseek = noop_llseek,
> + .mmap = drm_gem_cma_mmap,
> +};
> +
> +static struct drm_driver zx_drm_driver = {
> + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME |
> + DRIVER_ATOMIC,
> + .lastclose = zx_drm_lastclose,
> + .get_vblank_counter = drm_vblank_no_hw_counter,
> + .enable_vblank = zx_crtc_enable_vblank,
> + .disable_vblank = zx_crtc_disable_vblank,
> + .gem_free_object = drm_gem_cma_free_object,
> + .gem_vm_ops = &drm_gem_cma_vm_ops,
> + .dumb_create = drm_gem_cma_dumb_create,
> + .dumb_map_offset = drm_gem_cma_dumb_map_offset,
> + .dumb_destroy = drm_gem_dumb_destroy,
> + .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> + .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> + .gem_prime_export = drm_gem_prime_export,
> + .gem_prime_import = drm_gem_prime_import,
> + .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
> + .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
> + .gem_prime_vmap = drm_gem_cma_prime_vmap,
> + .gem_prime_vunmap = drm_gem_cma_prime_vunmap,
> + .gem_prime_mmap = drm_gem_cma_prime_mmap,
> + .fops = &zx_drm_fops,
> + .name = "zx-vou",
> + .desc = "ZTE VOU Controller DRM",
> + .date = "20160811",
> + .major = 1,
> + .minor = 0,
> +};
> +
> +static int zx_drm_bind(struct device *dev)
> +{
> + struct drm_device *drm;
> + struct zx_drm_private *priv;
> + int ret;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + drm = drm_dev_alloc(&zx_drm_driver, dev);
> + if (!drm)
> + return -ENOMEM;
> +
> + drm->dev_private = priv;
> + dev_set_drvdata(dev, drm);
> +
> + drm_mode_config_init(drm);
> + drm->mode_config.min_width = 16;
> + drm->mode_config.min_height = 16;
> + drm->mode_config.max_width = 4096;
> + drm->mode_config.max_height = 4096;
> + drm->mode_config.funcs = &zx_drm_mode_config_funcs;
> +
> + ret = drm_dev_register(drm, 0);
> + if (ret)
> + goto out_free;
> +
> + ret = component_bind_all(dev, drm);
> + if (ret) {
> + DRM_ERROR("Failed to bind all components\n");
> + goto out_unregister;
> + }
> +
> + ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
> + if (ret < 0) {
> + DRM_ERROR("failed to initialise vblank\n");
> + goto out_unbind;
> + }
> +
> + /*
> + * We will manage irq handler on our own. In this case, irq_enabled
> + * need to be true for using vblank core support.
> + */
> + drm->irq_enabled = true;
> +
> + drm_mode_config_reset(drm);
> + drm_kms_helper_poll_init(drm);
> +
> + priv->fbdev = drm_fbdev_cma_init(drm, 32, drm->mode_config.num_crtc,
> + drm->mode_config.num_connector);
> + if (IS_ERR(priv->fbdev)) {
> + ret = PTR_ERR(priv->fbdev);
> + priv->fbdev = NULL;
> + goto out_fini;
> + }
> +
> + return 0;
> +
> +out_fini:
> + drm_kms_helper_poll_fini(drm);
> + drm_mode_config_cleanup(drm);
> + drm_vblank_cleanup(drm);
> +out_unbind:
> + component_unbind_all(dev, drm);
> +out_unregister:
> + drm_dev_unregister(drm);
> +out_free:
> + dev_set_drvdata(dev, NULL);
> + drm_dev_unref(drm);
> + return ret;
> +}
> +
> +static void zx_drm_unbind(struct device *dev)
> +{
> + struct drm_device *drm = dev_get_drvdata(dev);
> + struct zx_drm_private *priv = drm->dev_private;
> +
> + if (priv->fbdev) {
> + drm_fbdev_cma_fini(priv->fbdev);
> + priv->fbdev = NULL;
> + }
> + drm_kms_helper_poll_fini(drm);
> + component_unbind_all(dev, drm);
> + drm_vblank_cleanup(drm);
> + drm_mode_config_cleanup(drm);
> + drm_dev_unregister(drm);
> + drm_dev_unref(drm);
> + drm->dev_private = NULL;
> + dev_set_drvdata(dev, NULL);
> +}
> +
> +static const struct component_master_ops zx_drm_master_ops = {
> + .bind = zx_drm_bind,
> + .unbind = zx_drm_unbind,
> +};
> +
> +static int compare_of(struct device *dev, void *data)
> +{
> + return dev->of_node == data;
> +}
> +
> +static int zx_drm_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *parent = dev->of_node;
> + struct device_node *child;
> + struct component_match *match = NULL;
> + int ret;
> +
> + ret = of_platform_populate(parent, NULL, NULL, dev);
> + if (ret)
> + return ret;
> +
> + for_each_available_child_of_node(parent, child) {
> + component_match_add(dev, &match, compare_of, child);
> + of_node_put(child);
> + }
> +
> + return component_master_add_with_match(dev, &zx_drm_master_ops, match);
> +}
> +
> +static int zx_drm_remove(struct platform_device *pdev)
> +{
> + component_master_del(&pdev->dev, &zx_drm_master_ops);
> + return 0;
> +}
> +
> +static const struct of_device_id zx_drm_of_match[] = {
> + { .compatible = "zte,zx296718-vou", },
> + { /* end */ },
> +};
> +MODULE_DEVICE_TABLE(of, zx_drm_of_match);
> +
> +static struct platform_driver zx_drm_platform_driver = {
> + .probe = zx_drm_probe,
> + .remove = zx_drm_remove,
> + .driver = {
> + .name = "zx-drm",
> + .of_match_table = zx_drm_of_match,
> + },
> +};
> +
> +static struct platform_driver *drivers[] = {
> + &zx_crtc_driver,
> + &zx_hdmi_driver,
> + &zx_drm_platform_driver,
> +};
> +
> +static int zx_drm_init(void)
> +{
> + return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
> +}
> +module_init(zx_drm_init);
> +
> +static void zx_drm_exit(void)
> +{
> + platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
> +}
> +module_exit(zx_drm_exit);
> +
> +MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
> +MODULE_DESCRIPTION("ZTE ZX VOU DRM driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/gpu/drm/zte/zx_drm_drv.h b/drivers/gpu/drm/zte/zx_drm_drv.h
> new file mode 100644
> index 000000000000..14c749949151
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_drm_drv.h
> @@ -0,0 +1,22 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __ZX_DRM_DRV_H__
> +#define __ZX_DRM_DRV_H__
> +
> +struct zx_drm_private {
> + struct drm_fbdev_cma *fbdev;
> + struct zx_vou_hw *vou;
> +};
> +
> +extern struct platform_driver zx_crtc_driver;
> +extern struct platform_driver zx_hdmi_driver;
> +
> +#endif /* __ZX_DRM_DRV_H__ */
> diff --git a/drivers/gpu/drm/zte/zx_hdmi.c b/drivers/gpu/drm/zte/zx_hdmi.c
> new file mode 100644
> index 000000000000..5aaab8493b1b
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_hdmi.c
> @@ -0,0 +1,540 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <drm/drm_of.h>
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_edid.h>
> +#include <linux/irq.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/hdmi.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_device.h>
> +#include <linux/component.h>
> +
> +#include "zx_crtc.h"
> +
> +#define FUNC_SEL 0x000b
> +#define FUNC_HDMI_EN BIT(0)
> +#define CLKPWD 0x000d
> +#define CLKPWD_PDIDCK BIT(2)
> +#define PWD_SRST 0x0010
> +#define P2T_CTRL 0x0066
> +#define P2T_DC_PKT_EN BIT(7)
> +#define L1_INTR_STAT 0x007e
> +#define L1_INTR_STAT_INTR1 BIT(0)
> +#define INTR1_STAT 0x008f
> +#define INTR1_MASK 0x0095
> +#define INTR1_MONITOR_DETECT (BIT(5) | BIT(6))
> +#define ZX_DDC_ADDR 0x00ed
> +#define ZX_DDC_SEGM 0x00ee
> +#define ZX_DDC_OFFSET 0x00ef
> +#define ZX_DDC_DIN_CNT1 0x00f0
> +#define ZX_DDC_DIN_CNT2 0x00f1
> +#define ZX_DDC_CMD 0x00f3
> +#define DDC_CMD_MASK 0xf
> +#define DDC_CMD_CLEAR_FIFO 0x9
> +#define DDC_CMD_SEQUENTIAL_READ 0x2
> +#define ZX_DDC_DATA 0x00f4
> +#define ZX_DDC_DOUT_CNT 0x00f5
> +#define DDC_DOUT_CNT_MASK 0x1f
> +#define TEST_TXCTRL 0x00f7
> +#define TEST_TXCTRL_HDMI_MODE BIT(1)
> +#define HDMICTL4 0x0235
> +#define TPI_HPD_RSEN 0x063b
> +#define TPI_HPD_CONNECTION (BIT(1) | BIT(2))
> +#define TPI_INFO_FSEL 0x06bf
> +#define FSEL_AVI 0
> +#define FSEL_GBD 1
> +#define FSEL_AUDIO 2
> +#define FSEL_SPD 3
> +#define FSEL_MPEG 4
> +#define FSEL_VSIF 5
> +#define TPI_INFO_B0 0x06c0
> +#define TPI_INFO_EN 0x06df
> +#define TPI_INFO_TRANS_EN BIT(7)
> +#define TPI_INFO_TRANS_RPT BIT(6)
> +#define TPI_DDC_MASTER_EN 0x06f8
> +#define HW_DDC_MASTER BIT(7)
> +
> +#define ZX_HDMI_INFOFRAME_SIZE 31
> +
> +struct zx_hdmi {
> + struct drm_connector connector;
> + struct drm_encoder encoder;
> + struct device *dev;
> + struct drm_device *drm;
> + void __iomem *mmio;
> + struct clk *cec_clk;
> + struct clk *osc_clk;
> + struct clk *xclk;
> + bool sink_is_hdmi;
> + bool sink_has_audio;
> + struct vou_inf *inf;
> +};
> +
> +#define to_zx_hdmi(x) container_of(x, struct zx_hdmi, x)
> +
> +static struct vou_inf vou_inf_hdmi = {
> + .id = VOU_HDMI,
> + .data_sel = VOU_YUV444,
> + .clocks_en_bits = BIT(24) | BIT(18) | BIT(6),
> + .clocks_sel_bits = BIT(13) | BIT(2),
> +};
This should be static const, but I suppose you can't b/c you're
storing a pointer to encoder in vou_inf. This type of information
lends itself well to being defined and mapped as of_device_id.data,
you'll need to pass the encoder around in a different manner.
> +
> +static inline u8 hdmi_readb(struct zx_hdmi *hdmi, u16 offset)
> +{
> + return readl_relaxed(hdmi->mmio + offset * 4);
> +}
> +
> +static inline void hdmi_writeb(struct zx_hdmi *hdmi, u16 offset, u8 val)
> +{
> + writel_relaxed(val, hdmi->mmio + offset * 4);
> +}
> +
> +static int zx_hdmi_infoframe_trans(struct zx_hdmi *hdmi,
> + union hdmi_infoframe *frame, u8 fsel)
> +{
> + u8 buffer[ZX_HDMI_INFOFRAME_SIZE];
> + u8 val;
> + ssize_t num;
> + int i;
> +
> + hdmi_writeb(hdmi, TPI_INFO_FSEL, fsel);
> +
> + num = hdmi_infoframe_pack(frame, buffer, ZX_HDMI_INFOFRAME_SIZE);
> + if (num < 0)
> + return num;
> +
> + for (i = 0; i < num; i++)
> + hdmi_writeb(hdmi, TPI_INFO_B0 + i, buffer[i]);
> +
> + val = hdmi_readb(hdmi, TPI_INFO_EN);
> + val |= TPI_INFO_TRANS_EN | TPI_INFO_TRANS_RPT;
> + hdmi_writeb(hdmi, TPI_INFO_EN, val);
> +
> + return num;
> +}
> +
> +static int zx_hdmi_config_video_vsi(struct zx_hdmi *hdmi,
> + struct drm_display_mode *mode)
> +{
> + union hdmi_infoframe frame;
> + int ret;
> +
> + ret = drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
> + mode);
> + if (ret)
Should you log in cases of failure (here and elsewhere)?
> + return ret;
> +
> + return zx_hdmi_infoframe_trans(hdmi, &frame, FSEL_VSIF);
> +}
> +
> +static int zx_hdmi_config_video_avi(struct zx_hdmi *hdmi,
> + struct drm_display_mode *mode)
> +{
> + union hdmi_infoframe frame;
> + int ret;
> +
> + ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, mode);
> + if (ret)
> + return ret;
> +
> + /* We always use YUV444 for HDMI output. */
> + frame.avi.colorspace = HDMI_COLORSPACE_YUV444;
> +
> + return zx_hdmi_infoframe_trans(hdmi, &frame, FSEL_AVI);
> +}
> +
> +static void zx_hdmi_encoder_mode_set(struct drm_encoder *encoder,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adj_mode)
> +{
> + struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
> +
> + if (hdmi->sink_is_hdmi) {
> + zx_hdmi_config_video_avi(hdmi, mode);
> + zx_hdmi_config_video_vsi(hdmi, mode);
> + }
> +}
> +
> +static void zx_hdmi_encoder_enable(struct drm_encoder *encoder)
> +{
> + struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
> +
> + vou_inf_enable(hdmi->inf);
I think you can remove the encoder from inf by passing encoder->crtc
here as well. That will tell vou which encoder/crtc pair to enable
without having that pesky static global floating around.
> +}
> +
> +static void zx_hdmi_encoder_disable(struct drm_encoder *encoder)
> +{
> + struct zx_hdmi *hdmi = to_zx_hdmi(encoder);
> +
> + vou_inf_disable(hdmi->inf);
Same here
> +}
> +
> +static const struct drm_encoder_helper_funcs zx_hdmi_encoder_helper_funcs = {
> + .enable = zx_hdmi_encoder_enable,
> + .disable = zx_hdmi_encoder_disable,
> + .mode_set = zx_hdmi_encoder_mode_set,
> +};
> +
> +static const struct drm_encoder_funcs zx_hdmi_encoder_funcs = {
> + .destroy = drm_encoder_cleanup,
> +};
> +
> +static int zx_hdmi_get_edid_block(void *data, u8 *buf, unsigned int block,
> + size_t len)
Instead of open-coding this, consider implementing an i2c adapter for
the DDC bus and use drm_get_edid below.
> +{
> + struct zx_hdmi *hdmi = data;
> + int retry = 0;
> + int ret = 0;
> + int i = 0;
> + u8 val;
> +
> + /* Enable DDC master access */
> + val = hdmi_readb(hdmi, TPI_DDC_MASTER_EN);
> + val |= HW_DDC_MASTER;
> + hdmi_writeb(hdmi, TPI_DDC_MASTER_EN, val);
> +
> + hdmi_writeb(hdmi, ZX_DDC_ADDR, 0xa0);
> + hdmi_writeb(hdmi, ZX_DDC_OFFSET, block * EDID_LENGTH);
> + /* Bits [9:8] of bytes */
> + hdmi_writeb(hdmi, ZX_DDC_DIN_CNT2, (len >> 8) & 0xff);
> + /* Bits [7:0] of bytes */
> + hdmi_writeb(hdmi, ZX_DDC_DIN_CNT1, len & 0xff);
> +
> + /* Clear FIFO */
> + val = hdmi_readb(hdmi, ZX_DDC_CMD);
> + val &= ~DDC_CMD_MASK;
> + val |= DDC_CMD_CLEAR_FIFO;
> + hdmi_writeb(hdmi, ZX_DDC_CMD, val);
> +
> + /* Kick off the read */
> + val = hdmi_readb(hdmi, ZX_DDC_CMD);
> + val &= ~DDC_CMD_MASK;
> + val |= DDC_CMD_SEQUENTIAL_READ;
> + hdmi_writeb(hdmi, ZX_DDC_CMD, val);
> +
> + while (len > 0) {
> + int cnt, j;
> +
> + /* FIFO needs some time to get ready */
> + usleep_range(500, 1000);
> +
> + cnt = hdmi_readb(hdmi, ZX_DDC_DOUT_CNT) & DDC_DOUT_CNT_MASK;
> + if (cnt == 0) {
> + if (++retry > 5) {
> + dev_err(hdmi->dev, "DDC read timed out!");
> + ret = -ETIMEDOUT;
> + break;
> + }
> + continue;
> + }
> +
> + for (j = 0; j < cnt; j++)
> + buf[i++] = hdmi_readb(hdmi, ZX_DDC_DATA);
> + len -= cnt;
> + }
> +
> + /* Disable DDC master access */
> + val = hdmi_readb(hdmi, TPI_DDC_MASTER_EN);
> + val &= ~HW_DDC_MASTER;
> + hdmi_writeb(hdmi, TPI_DDC_MASTER_EN, val);
> +
> + return ret;
> +}
> +
> +static int zx_hdmi_connector_get_modes(struct drm_connector *connector)
> +{
> + struct zx_hdmi *hdmi = to_zx_hdmi(connector);
> + struct edid *edid;
> + int ret = 0;
> +
> + edid = drm_do_get_edid(connector, zx_hdmi_get_edid_block, hdmi);
> + if (edid) {
> + hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
> + hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
> + drm_mode_connector_update_edid_property(connector, edid);
> + ret = drm_add_edid_modes(connector, edid);
> + kfree(edid);
> + }
> +
> + return ret;
> +}
> +
> +static enum drm_mode_status
> +zx_hdmi_connector_mode_valid(struct drm_connector *connector,
> + struct drm_display_mode *mode)
> +{
> + return MODE_OK;
> +}
> +
> +static struct drm_connector_helper_funcs zx_hdmi_connector_helper_funcs = {
> + .get_modes = zx_hdmi_connector_get_modes,
> + .mode_valid = zx_hdmi_connector_mode_valid,
> +};
> +
> +static enum drm_connector_status
> +zx_hdmi_connector_detect(struct drm_connector *connector, bool force)
> +{
> + struct zx_hdmi *hdmi = to_zx_hdmi(connector);
> +
> + return (hdmi_readb(hdmi, TPI_HPD_RSEN) & TPI_HPD_CONNECTION) ?
> + connector_status_connected : connector_status_disconnected;
> +}
> +
> +static void zx_hdmi_connector_destroy(struct drm_connector *connector)
> +{
> + drm_connector_unregister(connector);
> + drm_connector_cleanup(connector);
> +}
> +
> +static const struct drm_connector_funcs zx_hdmi_connector_funcs = {
> + .dpms = drm_atomic_helper_connector_dpms,
> + .fill_modes = drm_helper_probe_single_connector_modes,
> + .detect = zx_hdmi_connector_detect,
> + .destroy = zx_hdmi_connector_destroy,
> + .reset = drm_atomic_helper_connector_reset,
> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static int zx_hdmi_register(struct drm_device *drm, struct zx_hdmi *hdmi)
> +{
> + struct drm_encoder *encoder = &hdmi->encoder;
> +
> + encoder->possible_crtcs = VOU_CRTC_MASK;
> +
> + drm_encoder_init(drm, encoder, &zx_hdmi_encoder_funcs,
> + DRM_MODE_ENCODER_TMDS, NULL);
> + drm_encoder_helper_add(encoder, &zx_hdmi_encoder_helper_funcs);
> +
> + hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
> +
> + drm_connector_init(drm, &hdmi->connector, &zx_hdmi_connector_funcs,
> + DRM_MODE_CONNECTOR_HDMIA);
> + drm_connector_helper_add(&hdmi->connector,
> + &zx_hdmi_connector_helper_funcs);
> +
> + drm_mode_connector_attach_encoder(&hdmi->connector, encoder);
> + drm_connector_register(&hdmi->connector);
> +
> + return 0;
> +}
> +
> +static irqreturn_t zx_hdmi_irq_thread(int irq, void *dev_id)
> +{
> + struct zx_hdmi *hdmi = dev_id;
> +
> + drm_helper_hpd_irq_event(hdmi->connector.dev);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t zx_hdmi_irq_handler(int irq, void *dev_id)
> +{
> + struct zx_hdmi *hdmi = dev_id;
> + u8 lstat;
> +
> + lstat = hdmi_readb(hdmi, L1_INTR_STAT);
> +
> + /* Monitor detect/HPD interrupt */
> + if (lstat & L1_INTR_STAT_INTR1) {
> + u8 stat = hdmi_readb(hdmi, INTR1_STAT);
> +
> + hdmi_writeb(hdmi, INTR1_STAT, stat);
> + if (stat & INTR1_MONITOR_DETECT)
> + return IRQ_WAKE_THREAD;
> + }
> +
> + return IRQ_NONE;
> +}
> +
> +static void zx_hdmi_phy_start(struct zx_hdmi *hdmi)
> +{
> + /* Copy from ZTE BSP code */
> + hdmi_writeb(hdmi, 0x222, 0x0);
> + hdmi_writeb(hdmi, 0x224, 0x4);
> + hdmi_writeb(hdmi, 0x909, 0x0);
> + hdmi_writeb(hdmi, 0x7b0, 0x90);
> + hdmi_writeb(hdmi, 0x7b1, 0x00);
> + hdmi_writeb(hdmi, 0x7b2, 0xa7);
> + hdmi_writeb(hdmi, 0x7b8, 0xaa);
> + hdmi_writeb(hdmi, 0x7b2, 0xa7);
> + hdmi_writeb(hdmi, 0x7b3, 0x0f);
> + hdmi_writeb(hdmi, 0x7b4, 0x0f);
> + hdmi_writeb(hdmi, 0x7b5, 0x55);
> + hdmi_writeb(hdmi, 0x7b7, 0x03);
> + hdmi_writeb(hdmi, 0x7b9, 0x12);
> + hdmi_writeb(hdmi, 0x7ba, 0x32);
> + hdmi_writeb(hdmi, 0x7bc, 0x68);
> + hdmi_writeb(hdmi, 0x7be, 0x40);
> + hdmi_writeb(hdmi, 0x7bf, 0x84);
> + hdmi_writeb(hdmi, 0x7c1, 0x0f);
> + hdmi_writeb(hdmi, 0x7c8, 0x02);
> + hdmi_writeb(hdmi, 0x7c9, 0x03);
> + hdmi_writeb(hdmi, 0x7ca, 0x40);
> + hdmi_writeb(hdmi, 0x7dc, 0x31);
> + hdmi_writeb(hdmi, 0x7e2, 0x04);
> + hdmi_writeb(hdmi, 0x7e0, 0x06);
> + hdmi_writeb(hdmi, 0x7cb, 0x68);
> + hdmi_writeb(hdmi, 0x7f9, 0x02);
> + hdmi_writeb(hdmi, 0x7b6, 0x02);
> + hdmi_writeb(hdmi, 0x7f3, 0x0);
> +}
> +
> +static void zx_hdmi_hw_init(struct zx_hdmi *hdmi)
> +{
> + u8 val;
> +
> + /* Software reset */
> + hdmi_writeb(hdmi, PWD_SRST, 1);
> +
> + /* Enable pclk */
> + val = hdmi_readb(hdmi, CLKPWD);
> + val |= CLKPWD_PDIDCK;
> + hdmi_writeb(hdmi, CLKPWD, val);
> +
> + /* Enable HDMI for TX */
> + val = hdmi_readb(hdmi, FUNC_SEL);
> + val |= FUNC_HDMI_EN;
> + hdmi_writeb(hdmi, FUNC_SEL, val);
> +
> + /* Enable deep color packet */
> + val = hdmi_readb(hdmi, P2T_CTRL);
> + val |= P2T_DC_PKT_EN;
> + hdmi_writeb(hdmi, P2T_CTRL, val);
> +
> + /* Enable HDMI/MHL mode for output */
> + val = hdmi_readb(hdmi, TEST_TXCTRL);
> + val |= TEST_TXCTRL_HDMI_MODE;
> + hdmi_writeb(hdmi, TEST_TXCTRL, val);
> +
> + /* Configure reg_qc_sel */
> + hdmi_writeb(hdmi, HDMICTL4, 0x3);
> +
> + /* Enable interrupt */
> + val = hdmi_readb(hdmi, INTR1_MASK);
> + val |= INTR1_MONITOR_DETECT;
> + hdmi_writeb(hdmi, INTR1_MASK, val);
> +
> + /* Clear reset for normal operation */
> + hdmi_writeb(hdmi, PWD_SRST, 0);
> +
> + /* Start up phy */
> + zx_hdmi_phy_start(hdmi);
> +}
> +
> +static int zx_hdmi_bind(struct device *dev, struct device *master, void *data)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct drm_device *drm = data;
> + struct resource *res;
> + struct zx_hdmi *hdmi;
> + struct vou_inf *inf;
> + int irq;
> + int ret;
> +
> + hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
> + if (!hdmi)
> + return -ENOMEM;
> +
> + hdmi->dev = dev;
> + hdmi->drm = drm;
> +
> + inf = &vou_inf_hdmi;
> + inf->encoder = &hdmi->encoder;
> + hdmi->inf = inf;
> +
> + dev_set_drvdata(dev, hdmi);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + hdmi->mmio = devm_ioremap_resource(dev, res);
> + if (IS_ERR(hdmi->mmio))
> + return PTR_ERR(hdmi->mmio);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return irq;
> +
> + hdmi->cec_clk = devm_clk_get(hdmi->dev, "osc_cec");
> + if (IS_ERR(hdmi->cec_clk))
> + return PTR_ERR(hdmi->cec_clk);
> +
> + hdmi->osc_clk = devm_clk_get(hdmi->dev, "osc_clk");
> + if (IS_ERR(hdmi->osc_clk))
> + return PTR_ERR(hdmi->osc_clk);
> +
> + hdmi->xclk = devm_clk_get(hdmi->dev, "xclk");
> + if (IS_ERR(hdmi->xclk))
> + return PTR_ERR(hdmi->xclk);
> +
> + zx_hdmi_hw_init(hdmi);
> +
> + clk_prepare_enable(hdmi->cec_clk);
> + clk_prepare_enable(hdmi->osc_clk);
> + clk_prepare_enable(hdmi->xclk);
> +
> + ret = zx_hdmi_register(drm, hdmi);
> + if (ret)
> + return ret;
> +
> + ret = devm_request_threaded_irq(dev, irq, zx_hdmi_irq_handler,
> + zx_hdmi_irq_thread, IRQF_SHARED,
> + dev_name(dev), hdmi);
> +
> + return 0;
> +}
> +
> +static void zx_hdmi_unbind(struct device *dev, struct device *master,
> + void *data)
> +{
> + struct zx_hdmi *hdmi = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(hdmi->cec_clk);
> + clk_disable_unprepare(hdmi->osc_clk);
> + clk_disable_unprepare(hdmi->xclk);
> +}
> +
> +static const struct component_ops zx_hdmi_component_ops = {
> + .bind = zx_hdmi_bind,
> + .unbind = zx_hdmi_unbind,
> +};
> +
> +static int zx_hdmi_probe(struct platform_device *pdev)
> +{
> + return component_add(&pdev->dev, &zx_hdmi_component_ops);
> +}
> +
> +static int zx_hdmi_remove(struct platform_device *pdev)
> +{
> + component_del(&pdev->dev, &zx_hdmi_component_ops);
> + return 0;
> +}
> +
> +static const struct of_device_id zx_hdmi_of_match[] = {
> + { .compatible = "zte,zx296718-hdmi", },
> + { /* end */ },
> +};
> +MODULE_DEVICE_TABLE(of, zx_hdmi_of_match);
> +
> +struct platform_driver zx_hdmi_driver = {
> + .probe = zx_hdmi_probe,
> + .remove = zx_hdmi_remove,
> + .driver = {
> + .name = "zx-hdmi",
> + .of_match_table = zx_hdmi_of_match,
> + },
> +};
> diff --git a/drivers/gpu/drm/zte/zx_plane.c b/drivers/gpu/drm/zte/zx_plane.c
> new file mode 100644
> index 000000000000..326cc1ff7950
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_plane.c
> @@ -0,0 +1,362 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_modeset_helper_vtables.h>
> +#include <drm/drm_plane_helper.h>
> +
> +#include "zx_crtc.h"
> +#include "zx_plane.h"
> +
> +/* GL registers */
> +#define GL_CTRL0 0x00
> +#define GL_UPDATE BIT(5)
> +#define GL_CTRL1 0x04
> +#define GL_DATA_FMT_SHIFT 0
> +#define GL_DATA_FMT_MASK (0xf << GL_DATA_FMT_SHIFT)
> +#define GL_FMT_ARGB8888 0
> +#define GL_FMT_RGB888 1
> +#define GL_FMT_RGB565 2
> +#define GL_FMT_ARGB1555 3
> +#define GL_FMT_ARGB4444 4
> +#define GL_CTRL2 0x08
> +#define GL_GLOBAL_ALPHA_SHIFT 8
> +#define GL_GLOBAL_ALPHA_MASK (0xff << GL_GLOBAL_ALPHA_SHIFT)
> +#define GL_CTRL3 0x0c
> +#define GL_SCALER_BYPASS_MODE BIT(0)
> +#define GL_STRIDE 0x18
> +#define GL_ADDR 0x1c
> +#define GL_SRC_SIZE 0x38
> +#define GL_SRC_W_SHIFT 16
> +#define GL_SRC_W_MASK (0x3fff << GL_SRC_W_SHIFT)
> +#define GL_SRC_H_SHIFT 0
> +#define GL_SRC_H_MASK (0x3fff << GL_SRC_H_SHIFT)
> +#define GL_POS_START 0x9c
> +#define GL_POS_END 0xa0
> +#define GL_POS_X_SHIFT 16
> +#define GL_POS_X_MASK (0x1fff << GL_POS_X_SHIFT)
> +#define GL_POS_Y_SHIFT 0
> +#define GL_POS_Y_MASK (0x1fff << GL_POS_Y_SHIFT)
> +
> +/* CSC registers */
> +#define CSC_CTRL0 0x30
> +#define CSC_COV_MODE_SHIFT 16
> +#define CSC_COV_MODE_MASK (0xffff << CSC_COV_MODE_SHIFT)
> +#define CSC_BT601_IMAGE_RGB2YCBCR 0
> +#define CSC_BT601_IMAGE_YCBCR2RGB 1
> +#define CSC_BT601_VIDEO_RGB2YCBCR 2
> +#define CSC_BT601_VIDEO_YCBCR2RGB 3
> +#define CSC_BT709_IMAGE_RGB2YCBCR 4
> +#define CSC_BT709_IMAGE_YCBCR2RGB 5
> +#define CSC_BT709_VIDEO_RGB2YCBCR 6
> +#define CSC_BT709_VIDEO_YCBCR2RGB 7
> +#define CSC_BT2020_IMAGE_RGB2YCBCR 8
> +#define CSC_BT2020_IMAGE_YCBCR2RGB 9
> +#define CSC_BT2020_VIDEO_RGB2YCBCR 10
> +#define CSC_BT2020_VIDEO_YCBCR2RGB 11
> +#define CSC_WORK_ENABLE BIT(0)
> +
> +/* RSZ registers */
> +#define RSZ_SRC_CFG 0x00
> +#define RSZ_DEST_CFG 0x04
> +#define RSZ_ENABLE_CFG 0x14
> +
> +/* HBSC registers */
> +#define HBSC_SATURATION 0x00
> +#define HBSC_HUE 0x04
> +#define HBSC_BRIGHT 0x08
> +#define HBSC_CONTRAST 0x0c
> +#define HBSC_THRESHOLD_COL1 0x10
> +#define HBSC_THRESHOLD_COL2 0x14
> +#define HBSC_THRESHOLD_COL3 0x18
> +#define HBSC_CTRL0 0x28
> +#define HBSC_CTRL_EN BIT(2)
> +
> +struct zx_plane {
> + struct drm_plane plane;
> + void __iomem *layer;
> + void __iomem *csc;
> + void __iomem *hbsc;
> + void __iomem *rsz;
> +};
> +
> +#define to_zx_plane(plane) container_of(plane, struct zx_plane, plane)
> +
> +static const uint32_t gl_formats[] = {
> + DRM_FORMAT_ARGB8888,
> + DRM_FORMAT_XRGB8888,
> + DRM_FORMAT_RGB888,
> + DRM_FORMAT_RGB565,
> + DRM_FORMAT_ARGB1555,
> + DRM_FORMAT_ARGB4444,
> +};
> +
> +static int zx_gl_plane_atomic_check(struct drm_plane *plane,
> + struct drm_plane_state *state)
> +{
> + u32 src_w, src_h;
> +
> + src_w = state->src_w >> 16;
> + src_h = state->src_h >> 16;
> +
> + /* TODO: support scaling of the plane source */
> + if ((src_w != state->crtc_w) || (src_h != state->crtc_h))
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int zx_gl_get_fmt(uint32_t format)
> +{
> + switch (format) {
> + case DRM_FORMAT_ARGB8888:
> + case DRM_FORMAT_XRGB8888:
> + return GL_FMT_ARGB8888;
> + case DRM_FORMAT_RGB888:
> + return GL_FMT_RGB888;
> + case DRM_FORMAT_RGB565:
> + return GL_FMT_RGB565;
> + case DRM_FORMAT_ARGB1555:
> + return GL_FMT_ARGB1555;
> + case DRM_FORMAT_ARGB4444:
> + return GL_FMT_ARGB4444;
> + default:
> + WARN_ONCE(1, "invalid pixel format %d\n", format);
> + return -EINVAL;
> + }
> +}
> +
> +static inline void zx_gl_set_update(struct zx_plane *zplane)
> +{
> + void __iomem *layer = zplane->layer;
> + u32 val;
> +
> + val = readl(layer + GL_CTRL0);
> + val |= GL_UPDATE;
> + writel(val, layer + GL_CTRL0);
> +}
> +
> +static inline void zx_gl_rsz_set_update(struct zx_plane *zplane)
> +{
> + writel(1, zplane->rsz + RSZ_ENABLE_CFG);
> +}
> +
> +void zx_plane_set_update(struct drm_plane *plane)
> +{
> + struct zx_plane *zplane = to_zx_plane(plane);
> +
> + zx_gl_rsz_set_update(zplane);
> + zx_gl_set_update(zplane);
> +}
> +
> +static void zx_gl_rsz_setup(struct zx_plane *zplane, u32 src_w, u32 src_h,
> + u32 dst_w, u32 dst_h)
> +{
> + void __iomem *rsz = zplane->rsz;
> + u32 val;
> +
> + val = ((src_h - 1) & 0xffff) << 16;
> + val |= (src_w - 1) & 0xffff;
> + writel(val, rsz + RSZ_SRC_CFG);
> +
> + val = ((dst_h - 1) & 0xffff) << 16;
> + val |= (dst_w - 1) & 0xffff;
> + writel(val, rsz + RSZ_DEST_CFG);
> +
> + zx_gl_rsz_set_update(zplane);
> +}
> +
> +static void zx_gl_plane_atomic_update(struct drm_plane *plane,
> + struct drm_plane_state *old_state)
> +{
> + struct zx_plane *zplane = to_zx_plane(plane);
> + struct drm_framebuffer *fb = plane->state->fb;
> + struct drm_gem_cma_object *cma_obj;
> + void __iomem *layer = zplane->layer;
> + void __iomem *csc = zplane->csc;
> + void __iomem *hbsc = zplane->hbsc;
> + u32 src_x, src_y, src_w, src_h;
> + u32 dst_x, dst_y, dst_w, dst_h;
> + unsigned int depth, bpp;
> + uint32_t format;
> + dma_addr_t paddr;
> + u32 stride;
> + int fmt;
> + u32 val;
> +
> + if (!fb)
> + return;
> +
> + format = fb->pixel_format;
> + stride = fb->pitches[0];
> +
> + src_x = plane->state->src_x >> 16;
> + src_y = plane->state->src_y >> 16;
> + src_w = plane->state->src_w >> 16;
> + src_h = plane->state->src_h >> 16;
> +
> + dst_x = plane->state->crtc_x;
> + dst_y = plane->state->crtc_y;
> + dst_w = plane->state->crtc_w;
> + dst_h = plane->state->crtc_h;
> +
> + drm_fb_get_bpp_depth(format, &depth, &bpp);
> +
> + cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
> + paddr = cma_obj->paddr + fb->offsets[0];
> + paddr += src_y * stride + src_x * bpp / 8;
> + writel(paddr, layer + GL_ADDR);
> +
> + /* Set up source height/width register */
> + val = (src_w << GL_SRC_W_SHIFT) & GL_SRC_W_MASK;
> + val |= (src_h << GL_SRC_H_SHIFT) & GL_SRC_H_MASK;
> + writel(val, layer + GL_SRC_SIZE);
> +
> + /* Set up start position register */
> + val = (dst_x << GL_POS_X_SHIFT) & GL_POS_X_MASK;
> + val |= (dst_y << GL_POS_Y_SHIFT) & GL_POS_Y_MASK;
> + writel(val, layer + GL_POS_START);
> +
> + /* Set up end position register */
> + val = ((dst_x + dst_w) << GL_POS_X_SHIFT) & GL_POS_X_MASK;
> + val |= ((dst_y + dst_h) << GL_POS_Y_SHIFT) & GL_POS_Y_MASK;
> + writel(val, layer + GL_POS_END);
> +
> + /* Set up stride register */
> + writel(stride & 0xffff, layer + GL_STRIDE);
> +
> + /* Set up graphic layer data format */
> + fmt = zx_gl_get_fmt(format);
> + if (fmt >= 0) {
> + val = readl(layer + GL_CTRL1);
> + val &= ~GL_DATA_FMT_MASK;
> + val |= fmt << GL_DATA_FMT_SHIFT;
> + writel(val, layer + GL_CTRL1);
> + }
> +
> + /* Initialize global alpha with a sane value */
> + val = readl(layer + GL_CTRL2);
> + val &= ~GL_GLOBAL_ALPHA_MASK;
> + val |= 0xff << GL_GLOBAL_ALPHA_SHIFT;
> + writel(val, layer + GL_CTRL2);
> +
> + /* Setup CSC for the GL */
> + val = readl(csc + CSC_CTRL0);
> + val &= ~CSC_COV_MODE_MASK;
> + if (dst_h > 720)
> + val |= CSC_BT709_IMAGE_RGB2YCBCR << CSC_COV_MODE_SHIFT;
> + else
> + val |= CSC_BT601_IMAGE_RGB2YCBCR << CSC_COV_MODE_SHIFT;
> + val |= CSC_WORK_ENABLE;
> + writel(val, csc + CSC_CTRL0);
> +
> + /* Always use scaler since it exists */
> + val = readl(layer + GL_CTRL3);
> + val |= GL_SCALER_BYPASS_MODE; /* set for not bypass */
> + writel(val, layer + GL_CTRL3);
> +
> + zx_gl_rsz_setup(zplane, src_w, src_h, dst_w, dst_h);
> +
> + /* Enable HBSC block */
> + val = readl(hbsc + HBSC_CTRL0);
> + val |= HBSC_CTRL_EN;
> + writel(val, hbsc + HBSC_CTRL0);
> +
> + zx_gl_set_update(zplane);
> +}
> +
> +static const struct drm_plane_helper_funcs zx_gl_plane_helper_funcs = {
> + .atomic_check = zx_gl_plane_atomic_check,
> + .atomic_update = zx_gl_plane_atomic_update,
> +};
> +
> +static void zx_plane_destroy(struct drm_plane *plane)
> +{
> + drm_plane_helper_disable(plane);
> + drm_plane_cleanup(plane);
> +}
> +
> +static const struct drm_plane_funcs zx_plane_funcs = {
> + .update_plane = drm_atomic_helper_update_plane,
> + .disable_plane = drm_atomic_helper_disable_plane,
> + .destroy = zx_plane_destroy,
> + .reset = drm_atomic_helper_plane_reset,
> + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
> +};
> +
> +static void zx_plane_hbsc_init(struct zx_plane *zplane)
> +{
> + void __iomem *hbsc = zplane->hbsc;
> +
> + /*
> + * Initialize HBSC block with a sane configuration per recommedation
> + * from ZTE BSP code.
> + */
> + writel(0x200, hbsc + HBSC_SATURATION);
> + writel(0x0, hbsc + HBSC_HUE);
> + writel(0x0, hbsc + HBSC_BRIGHT);
> + writel(0x200, hbsc + HBSC_CONTRAST);
> +
> + writel((0x3ac << 16) | 0x40, hbsc + HBSC_THRESHOLD_COL1);
> + writel((0x3c0 << 16) | 0x40, hbsc + HBSC_THRESHOLD_COL2);
> + writel((0x3c0 << 16) | 0x40, hbsc + HBSC_THRESHOLD_COL3);
> +}
> +
> +struct drm_plane *zx_plane_init(struct drm_device *drm, struct device *dev,
> + struct zx_layer_data *data,
> + enum drm_plane_type type)
> +{
> + const struct drm_plane_helper_funcs *helper;
> + struct zx_plane *zplane;
> + struct drm_plane *plane;
> + const uint32_t *formats;
> + unsigned int format_count;
> + int ret;
> +
> + zplane = devm_kzalloc(dev, sizeof(*zplane), GFP_KERNEL);
> + if (!zplane)
> + return ERR_PTR(-ENOMEM);
> +
> + plane = &zplane->plane;
> +
> + zplane->layer = data->layer;
> + zplane->hbsc = data->hbsc;
> + zplane->csc = data->csc;
> + zplane->rsz = data->rsz;
> +
> + zx_plane_hbsc_init(zplane);
> +
> + switch (type) {
> + case DRM_PLANE_TYPE_PRIMARY:
> + helper = &zx_gl_plane_helper_funcs;
> + formats = gl_formats;
> + format_count = ARRAY_SIZE(gl_formats);
> + break;
> + case DRM_PLANE_TYPE_OVERLAY:
> + /* TODO: add video layer (vl) support */
> + break;
> + default:
> + return ERR_PTR(-ENODEV);
> + }
> +
> + ret = drm_universal_plane_init(drm, plane, VOU_CRTC_MASK,
> + &zx_plane_funcs, formats, format_count,
> + type, NULL);
> + if (ret)
> + return ERR_PTR(ret);
> +
> + drm_plane_helper_add(plane, helper);
> +
> + return plane;
> +}
> diff --git a/drivers/gpu/drm/zte/zx_plane.h b/drivers/gpu/drm/zte/zx_plane.h
> new file mode 100644
> index 000000000000..2b82cd558d9d
> --- /dev/null
> +++ b/drivers/gpu/drm/zte/zx_plane.h
> @@ -0,0 +1,26 @@
> +/*
> + * Copyright 2016 Linaro Ltd.
> + * Copyright 2016 ZTE Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __ZX_PLANE_H__
> +#define __ZX_PLANE_H__
> +
> +struct zx_layer_data {
> + void __iomem *layer;
> + void __iomem *csc;
> + void __iomem *hbsc;
> + void __iomem *rsz;
> +};
> +
> +struct drm_plane *zx_plane_init(struct drm_device *drm, struct device *dev,
> + struct zx_layer_data *data,
> + enum drm_plane_type type);
> +void zx_plane_set_update(struct drm_plane *plane);
> +
> +#endif /* __ZX_PLANE_H__ */
> --
> 1.9.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply
* [PATCH v10 0/4] ACPI: parse the SPCR table
From: Greg Kroah-Hartman @ 2016-09-27 15:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <3529130a-d44d-3160-4fbc-9827f8d94196@linaro.org>
On Mon, Sep 26, 2016 at 12:48:47PM -0700, Aleksey Makarov wrote:
>
>
> On 09/21/2016 10:22 AM, Aleksey Makarov wrote:
> >
> >
> > On 09/21/2016 07:38 PM, Greg Kroah-Hartman wrote:
> > > On Wed, Sep 21, 2016 at 11:19:35AM -0500, Timur Tabi wrote:
> > > > On Wed, Sep 21, 2016 at 5:37 AM, Greg Kroah-Hartman
> > > > <gregkh@linuxfoundation.org> wrote:
> > > > >
> > > > > I thought you asked Rafael to take them, they are not in my queue
> > > > > anymore because of that. Don't try to shop-around for maintainers
> > > > > please, that's kind of rude...
> > > >
> > > > In Aleksey's defense, these patches have been floating around for far
> > > > too long, so I can understand his frustration.
> > >
> > > I understand the frustration as well, cross-maintainer messy patches
> > > like this are hard to get merged at times at they fall between the
> > > cracks a lot.
> > >
> > > > But as you said, I really hope Rafael picks these up for 4.9. We need
> > > > these patches for ARM server.
> > >
> > > I thought I saw an email saying he would do so, but it might have been
> > > for some other patchset, sorry...
> >
> > This can be for "ACPI: ARM64: support for ACPI_TABLE_UPGRADE":
> >
> > https://lkml.kernel.org/r/CAJZ5v0goXsQ2umcDXU0six+QtxcKGZq7mxhgxuvXTH2iZt6YNA at mail.gmail.com
> >
> > As for this patchset, Rafael ACKed the ACPI part:
> >
> > https://lkml.kernel.org/r/CAJZ5v0hdoLTfjrD8+WxSoxM48dqbZK2KwY_h+63kHKHKgO=JFA at mail.gmail.com
> >
> > but I can not find any acknowledge from him that he is ready to merge the series.
> > On the contrary, he expressed his doubt that he is "the right maintainer to send this to":
> >
> > https://lkml.kernel.org/r/CAJZ5v0gzjtFzig7nEumr83+J2dGb+OA8GNR2i45ZqznfV_hA-A at mail.gmail.com
> >
> > I asked the ARM64 people, they said they prefer Rafael to do that:
> >
> > https://lkml.kernel.org/r/20160909151758.GA11418 at arm.com
> >
> > I interpreted the silence from Rafael as unwillingness to pull the series
> > and thought it's OK to ask you.
> >
> > I am sorry if this looks rude for Rafael, I did not mean that.
>
> Hi Greg,
>
> Can you give advise on how to deal with this situation please?
>
> It looks like Rafael does not want to pull the patches. Some time ago he wrote:
>
> "Honestly, I'm not sure why I'm regarded as the right maintainer to send this to.
>
> The only patch here touching generic ACPI code is [3/5] (the [2/5] is
> going in through ACPICA) and the rest is all about ARM64 AFAICS. Why
> don't you send it to the ARM64 maintainers instead?"
>
> (https://lkml.kernel.org/r/CAJZ5v0gzjtFzig7nEumr83+J2dGb+OA8GNR2i45ZqznfV_hA-A at mail.gmail.com)
>
> ARM64 maintainer said
>
> "The series should go via Rafael, since the bulk of the changes are
> outside of arch/arm64."
>
> (https://lkml.kernel.org/r/20160909151758.GA11418 at arm.com)
>
> So should I continue to try to reach Rafael or ask another maintainer?
> Can you pull it for 4.9?
crazy, no one wants to touch this :)
So, do you have acks from all of the relevant people? If so, sure, I
can take it, can you resend me a full copy of the patches and I'll queue
them up?
thanks,
greg k-h
^ permalink raw reply
* [PATCHv3 1/3] serial: mctrl_gpio: implement mctrl_gpio_use_rtscts
From: Richard Genoud @ 2016-09-27 15:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20160927151207.owivtd7ruvgmexu7@pengutronix.de>
2016-09-27 17:12 GMT+02:00 Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>:
> Hello,
>
> On Tue, Sep 27, 2016 at 04:13:11PM +0200, Richard Genoud wrote:
>> diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c
>> index d2da6aa7f27d..0e5525a64c2a 100644
>> --- a/drivers/tty/serial/serial_mctrl_gpio.c
>> +++ b/drivers/tty/serial/serial_mctrl_gpio.c
>> @@ -17,6 +17,7 @@
>> #include <linux/err.h>
>> #include <linux/device.h>
>> #include <linux/irq.h>
>> +#include <linux/err.h>
>
> this isn't needed any more, right?
indeed !
>
>> #include <linux/gpio/consumer.h>
>> #include <linux/termios.h>
>> #include <linux/serial_core.h>
>> @@ -72,6 +73,13 @@ struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
>> }
>> EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod);
>>
>> +bool mctrl_gpio_use_rtscts(struct mctrl_gpios *gpios)
>> +{
>> + return mctrl_gpio_to_gpiod(gpios, UART_GPIO_CTS) &&
>> + mctrl_gpio_to_gpiod(gpios, UART_GPIO_RTS);
>> +}
>> +EXPORT_SYMBOL_GPL(mctrl_gpio_use_rtscts);
>> +
>> unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl)
>> {
>> enum mctrl_gpio_idx i;
>
> Best regards
> Uwe
Thanks !
Richard.
^ permalink raw reply
* [PATCHv3 1/3] serial: mctrl_gpio: implement mctrl_gpio_use_rtscts
From: Uwe Kleine-König @ 2016-09-27 15:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20160927141313.27668-2-richard.genoud@gmail.com>
Hello,
On Tue, Sep 27, 2016 at 04:13:11PM +0200, Richard Genoud wrote:
> diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c
> index d2da6aa7f27d..0e5525a64c2a 100644
> --- a/drivers/tty/serial/serial_mctrl_gpio.c
> +++ b/drivers/tty/serial/serial_mctrl_gpio.c
> @@ -17,6 +17,7 @@
> #include <linux/err.h>
> #include <linux/device.h>
> #include <linux/irq.h>
> +#include <linux/err.h>
this isn't needed any more, right?
> #include <linux/gpio/consumer.h>
> #include <linux/termios.h>
> #include <linux/serial_core.h>
> @@ -72,6 +73,13 @@ struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
> }
> EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod);
>
> +bool mctrl_gpio_use_rtscts(struct mctrl_gpios *gpios)
> +{
> + return mctrl_gpio_to_gpiod(gpios, UART_GPIO_CTS) &&
> + mctrl_gpio_to_gpiod(gpios, UART_GPIO_RTS);
> +}
> +EXPORT_SYMBOL_GPL(mctrl_gpio_use_rtscts);
> +
> unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl)
> {
> enum mctrl_gpio_idx i;
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply
* [PATCH 5/5] arm64: Add uprobe support
From: Pratyush Anand @ 2016-09-27 15:03 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20160927135133.GF17336@e104818-lin.cambridge.arm.com>
On Tuesday 27 September 2016 07:21 PM, Catalin Marinas wrote:
>>>>> Looking at prepare_uprobe(), we have a weak is_trap_insn() function.
>>>>> > > > > This check is meaningless without knowing which instruction set we
>>>>> > > > > target. A false positive here, however, is not that bad as we wouldn't
>>>>> > > > > end up inserting the wrong breakpoint in the executable. But it looks to
>>>>> > > > > me like the core uprobe code needs to pass some additional information
>>>>> > > > > like the type of task or ELF format to the arch code to make a useful
>>>>> > > > > choice of breakpoint type.
>>>> > > >
>>>> > > > It seems that 'strtle r0, [r0], #160' would have the closest matching
>>>> > > > aarch32 instruction wrt BRK64_OPCODE_UPROBES(0xd42000A0). But that too
>>>> > > > seems a bad instruction. So, may be we can use still weak
>>>> > > > is_trap_insn().
>>> > >
>>> > > Even if the is_trap_insn() check passes, we would reject the probe in
>>> > > arch_uprobe_analyze_insn() immediately after based on the mm type check,
>>> > > so not too bad.
>> >
>> > OK..I will have an always returning false from arm64 is_trap_insn() in v2.
> For the time being, I think the default is_trap_insn() check is still
> useful on arm64.
I have already sent V2 with arm64 is_trap_insn() :(
> The problem gets trickier when we add AArch32 support
> as it may return 'true' on an AArch32 instruction that matches the
> AArch64 BRK (or vice-versa). That's when we need to either pass the mm
> to is_trap_insn() or simply return false and always perform the check in
> the arch_uprobe_analyze_insn() (which should, in addition, check for the
> trap instruction).
Yes, I agree that we will have to modify is_trap_insn() for supporting
aarch32 task tracing.
>
> There is also the is_trap_at_addr() function which uses is_trap_insn().
> I haven't checked the call paths here, are there any implications if
> is_trap_insn() always returns false?
I had looked into it and also tested that a tracepoint at an application
having a same instruction as that of "uprobe break instruction" ie "BRK
#0x5" is rejected. So, I think a false positive return from
is_tarp_insn() is still OK.
~Pratyush
^ permalink raw reply
* [PATCH 8/8] pinctrl: aspeed-g5: Add mux configuration for all pins
From: Andrew Jeffery @ 2016-09-27 14:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.115463f791b69859c5ce9dafd61a5755ea039f4b.1474986045.git-series.andrew@aj.id.au>
The patch introducing the g5 pinctrl driver implemented a smattering of
pins to flesh out the implementation of the core and provide bare-bones
support for some OpenPOWER platforms and the AST2500 evaluation board.
Now, update the bindings document to reflect the complete functionality
and implement the necessary pin configuration tables in the driver.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 17 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 1476 ++++++-
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 1 +-
3 files changed, 1487 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index 0defef01ff83..67e133ba3113 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -46,10 +46,19 @@ VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2
aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
-GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8
-I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7
-RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
-TIMER7 TIMER8 VGABIOSROM
+ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
+ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT ESPI FWSPICS1 FWSPICS2 GPID0 GPID2 GPID4
+GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6
+I2C7 I2C8 I2C9 LAD0 LAD1 LAD2 LAD3 LCLK LFRAME LPCHC LPCPD LPCPLUS LPCPME
+LPCRST LPCSMI LSIRQ MAC1LINK MAC2LINK MDIO1 MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1
+NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4 NDTR1 NDTR2 NDTR3 NDTR4 NRI1 NRI2
+NRI3 NRI4 NRTS1 NRTS2 NRTS3 NRTS4 OSCCLK PEWAKE PNOR PWM0 PWM1 PWM2 PWM3 PWM4
+PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 RXD1 RXD2 RXD3 RXD4 SALT1 SALT10
+SALT11 SALT12 SALT13 SALT14 SALT2 SALT3 SALT4 SALT5 SALT6 SALT7 SALT8 SALT9
+SCL1 SCL2 SD1 SD2 SDA1 SDA2 SGPS1 SGPS2 SIOONCTRL SIOPBI SIOPBO SIOPWREQ
+SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1CS1 SPI1DEBUG SPI1PASSTHRU SPI2CK SPI2CS0
+SPI2CS1 SPI2MISO SPI2MOSI TIMER3 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2
+TXD3 TXD4 UART6 USBCKI VGABIOSROM VGAHS VGAVS VPI24 VPO WDTRST1 WDTRST2
Examples:
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index c8c72e8259d3..481e836d12e5 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -24,14 +24,27 @@
#include "../pinctrl-utils.h"
#include "pinctrl-aspeed.h"
-#define ASPEED_G5_NR_PINS 228
+#define ASPEED_G5_NR_PINS 232
#define COND1 SIG_DESC_BIT(SCU90, 6, 0)
#define COND2 { SCU94, GENMASK(1, 0), 0, 0 }
+#define LHCR0 SIG_DESC_TO_REG(ASPEED_IP_LPC, 0xA0)
+#define GFX064 SIG_DESC_TO_REG(ASPEED_IP_GFX, 0x64)
+
#define B14 0
SSSF_PIN_DECL(B14, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
+#define D14 1
+SSSF_PIN_DECL(D14, GPIOA1, MAC2LINK, SIG_DESC_SET(SCU80, 1));
+
+#define D13 2
+SIG_EXPR_LIST_DECL_SINGLE(SPI1CS1, SPI1CS1, SIG_DESC_SET(SCU80, 15));
+SIG_EXPR_LIST_DECL_SINGLE(TIMER3, TIMER3, SIG_DESC_SET(SCU80, 2));
+MS_PIN_DECL(D13, GPIOA2, SPI1CS1, TIMER3);
+FUNC_GROUP_DECL(SPI1CS1, D13);
+FUNC_GROUP_DECL(TIMER3, D13);
+
#define E13 3
SSSF_PIN_DECL(E13, GPIOA3, TIMER4, SIG_DESC_SET(SCU80, 3));
@@ -71,6 +84,32 @@ FUNC_GROUP_DECL(TIMER8, B13);
FUNC_GROUP_DECL(MDIO2, C13, B13);
+#define K19 8
+GPIO_PIN_DECL(K19, GPIOB0);
+
+#define L19 9
+GPIO_PIN_DECL(L19, GPIOB1);
+
+#define L18 10
+GPIO_PIN_DECL(L18, GPIOB2);
+
+#define K18 11
+GPIO_PIN_DECL(K18, GPIOB3);
+
+#define J20 12
+SSSF_PIN_DECL(J20, GPIOB4, USBCKI, SIG_DESC_SET(HW_STRAP1, 23));
+
+#define H21 13
+#define H21_DESC SIG_DESC_SET(SCU80, 13)
+SIG_EXPR_LIST_DECL_SINGLE(LPCPD, LPCPD, H21_DESC, SIG_DESC_BIT(SIORD30, 1, 0));
+SIG_EXPR_LIST_DECL_SINGLE(LPCSMI, LPCSMI, H21_DESC, SIG_DESC_SET(SIORD30, 1));
+MS_PIN_DECL(H21, GPIOB5, LPCPD, LPCSMI);
+FUNC_GROUP_DECL(LPCPD, H21);
+FUNC_GROUP_DECL(LPCSMI, H21);
+
+#define H22 14
+SSSF_PIN_DECL(H22, GPIOB6, LPCPME, SIG_DESC_SET(SCU80, 14));
+
#define H20 15
GPIO_PIN_DECL(H20, GPIOB7);
@@ -167,7 +206,44 @@ MS_PIN_DECL(D20, GPIOD3, SD2DAT1, GPID2OUT);
FUNC_GROUP_DECL(GPID2, F20, D20);
-#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 21)
+#define GPID4_DESC SIG_DESC_SET(SCU8C, 10)
+
+#define D21 28
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT2, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4IN, GPID4, GPID);
+MS_PIN_DECL(D21, GPIOD4, SD2DAT2, GPID4IN);
+
+#define E20 29
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT3, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4OUT, GPID4, GPID);
+MS_PIN_DECL(E20, GPIOD5, SD2DAT3, GPID4OUT);
+
+FUNC_GROUP_DECL(GPID4, D21, E20);
+
+#define GPID6_DESC SIG_DESC_SET(SCU8C, 11)
+
+#define G18 30
+SIG_EXPR_LIST_DECL_SINGLE(SD2CD, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6IN, GPID6, GPID);
+MS_PIN_DECL(G18, GPIOD6, SD2CD, GPID6IN);
+
+#define C21 31
+SIG_EXPR_LIST_DECL_SINGLE(SD2WP, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6OUT, GPID6, GPID);
+MS_PIN_DECL(C21, GPIOD7, SD2WP, GPID6OUT);
+
+FUNC_GROUP_DECL(GPID6, G18, C21);
+FUNC_GROUP_DECL(SD2, F19, E21, F20, D20, D21, E20, G18, C21);
+
+#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 22)
#define GPIE0_DESC SIG_DESC_SET(SCU8C, 12)
#define B20 32
@@ -176,6 +252,7 @@ SIG_EXPR_DECL(GPIE0IN, GPIE0, GPIE0_DESC);
SIG_EXPR_DECL(GPIE0IN, GPIE, GPIE_DESC);
SIG_EXPR_LIST_DECL_DUAL(GPIE0IN, GPIE0, GPIE);
MS_PIN_DECL(B20, GPIOE0, NCTS3, GPIE0IN);
+FUNC_GROUP_DECL(NCTS3, B20);
#define C20 33
SIG_EXPR_LIST_DECL_SINGLE(NDCD3, NDCD3, SIG_DESC_SET(SCU80, 17));
@@ -183,9 +260,227 @@ SIG_EXPR_DECL(GPIE0OUT, GPIE0, GPIE0_DESC);
SIG_EXPR_DECL(GPIE0OUT, GPIE, GPIE_DESC);
SIG_EXPR_LIST_DECL_DUAL(GPIE0OUT, GPIE0, GPIE);
MS_PIN_DECL(C20, GPIOE1, NDCD3, GPIE0OUT);
+FUNC_GROUP_DECL(NDCD3, C20);
FUNC_GROUP_DECL(GPIE0, B20, C20);
+#define GPIE2_DESC SIG_DESC_SET(SCU8C, 13)
+
+#define F18 34
+SIG_EXPR_LIST_DECL_SINGLE(NDSR3, NDSR3, SIG_DESC_SET(SCU80, 18));
+SIG_EXPR_DECL(GPIE2IN, GPIE2, GPIE2_DESC);
+SIG_EXPR_DECL(GPIE2IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE2IN, GPIE2, GPIE);
+MS_PIN_DECL(F18, GPIOE2, NDSR3, GPIE2IN);
+FUNC_GROUP_DECL(NDSR3, F18);
+
+
+#define F17 35
+SIG_EXPR_LIST_DECL_SINGLE(NRI3, NRI3, SIG_DESC_SET(SCU80, 19));
+SIG_EXPR_DECL(GPIE2OUT, GPIE2, GPIE2_DESC);
+SIG_EXPR_DECL(GPIE2OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE2OUT, GPIE2, GPIE);
+MS_PIN_DECL(F17, GPIOE3, NRI3, GPIE2OUT);
+FUNC_GROUP_DECL(NRI3, F17);
+
+FUNC_GROUP_DECL(GPIE2, F18, F17);
+
+#define GPIE4_DESC SIG_DESC_SET(SCU8C, 14)
+
+#define E18 36
+SIG_EXPR_LIST_DECL_SINGLE(NDTR3, NDTR3, SIG_DESC_SET(SCU80, 20));
+SIG_EXPR_DECL(GPIE4IN, GPIE4, GPIE4_DESC);
+SIG_EXPR_DECL(GPIE4IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE4IN, GPIE4, GPIE);
+MS_PIN_DECL(E18, GPIOE4, NDTR3, GPIE4IN);
+FUNC_GROUP_DECL(NDTR3, E18);
+
+#define D19 37
+SIG_EXPR_LIST_DECL_SINGLE(NRTS3, NRTS3, SIG_DESC_SET(SCU80, 21));
+SIG_EXPR_DECL(GPIE4OUT, GPIE4, GPIE4_DESC);
+SIG_EXPR_DECL(GPIE4OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE4OUT, GPIE4, GPIE);
+MS_PIN_DECL(D19, GPIOE5, NRTS3, GPIE4OUT);
+FUNC_GROUP_DECL(NRTS3, D19);
+
+FUNC_GROUP_DECL(GPIE4, E18, D19);
+
+#define GPIE6_DESC SIG_DESC_SET(SCU8C, 15)
+
+#define A20 38
+SIG_EXPR_LIST_DECL_SINGLE(TXD3, TXD3, SIG_DESC_SET(SCU80, 22));
+SIG_EXPR_DECL(GPIE6IN, GPIE6, GPIE6_DESC);
+SIG_EXPR_DECL(GPIE6IN, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE6IN, GPIE6, GPIE);
+MS_PIN_DECL(A20, GPIOE6, TXD3, GPIE6IN);
+FUNC_GROUP_DECL(TXD3, A20);
+
+#define B19 39
+SIG_EXPR_LIST_DECL_SINGLE(RXD3, RXD3, SIG_DESC_SET(SCU80, 23));
+SIG_EXPR_DECL(GPIE6OUT, GPIE6, GPIE6_DESC);
+SIG_EXPR_DECL(GPIE6OUT, GPIE, GPIE_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPIE6OUT, GPIE6, GPIE);
+MS_PIN_DECL(B19, GPIOE7, RXD3, GPIE6OUT);
+FUNC_GROUP_DECL(RXD3, B19);
+
+FUNC_GROUP_DECL(GPIE6, A20, B19);
+
+#define LPCHC_DESC SIG_DESC_SET(LHCR0, 0)
+#define LPCPLUS_DESC SIG_DESC_SET(SCU90, 30)
+
+#define J19 40
+SIG_EXPR_DECL(LHAD0, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD0, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD0, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NCTS4, NCTS4, SIG_DESC_SET(SCU80, 24));
+MS_PIN_DECL(J19, GPIOF0, LHAD0, NCTS4);
+FUNC_GROUP_DECL(NCTS4, J19);
+
+#define J18 41
+SIG_EXPR_DECL(LHAD1, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD1, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD1, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD4, NDCD4, SIG_DESC_SET(SCU80, 25));
+MS_PIN_DECL(J18, GPIOF1, LHAD1, NDCD4);
+FUNC_GROUP_DECL(NDCD4, J18);
+
+#define B22 42
+SIG_EXPR_DECL(LHAD2, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD2, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD2, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR4, NDSR4, SIG_DESC_SET(SCU80, 26));
+MS_PIN_DECL(B22, GPIOF2, LHAD2, NDSR4);
+FUNC_GROUP_DECL(NDSR4, B22);
+
+#define B21 43
+SIG_EXPR_DECL(LHAD3, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHAD3, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHAD3, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NRI4, NRI4, SIG_DESC_SET(SCU80, 27));
+MS_PIN_DECL(B21, GPIOF3, LHAD3, NRI4);
+FUNC_GROUP_DECL(NRI4, B21);
+
+#define A21 44
+SIG_EXPR_DECL(LHCLK, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHCLK, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHCLK, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR4, NDTR4, SIG_DESC_SET(SCU80, 28));
+MS_PIN_DECL(A21, GPIOF4, LHCLK, NDTR4);
+FUNC_GROUP_DECL(NDTR4, A21);
+
+#define H19 45
+SIG_EXPR_DECL(LHFRAME, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHFRAME, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHFRAME, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS4, NRTS4, SIG_DESC_SET(SCU80, 29));
+MS_PIN_DECL(H19, GPIOF5, LHFRAME, NRTS4);
+FUNC_GROUP_DECL(NRTS4, H19);
+
+#define G17 46
+SIG_EXPR_LIST_DECL_SINGLE(LHSIRQ, LPCHC, LPCHC_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(TXD4, TXD4, SIG_DESC_SET(SCU80, 30));
+MS_PIN_DECL(G17, GPIOF6, LHSIRQ, TXD4);
+FUNC_GROUP_DECL(TXD4, G17);
+
+#define H18 47
+SIG_EXPR_DECL(LHRST, LPCHC, LPCHC_DESC);
+SIG_EXPR_DECL(LHRST, LPCPLUS, LPCPLUS_DESC);
+SIG_EXPR_LIST_DECL_DUAL(LHRST, LPCHC, LPCPLUS);
+SIG_EXPR_LIST_DECL_SINGLE(RXD4, RXD4, SIG_DESC_SET(SCU80, 31));
+MS_PIN_DECL(H18, GPIOF7, LHRST, RXD4);
+FUNC_GROUP_DECL(RXD4, H18);
+
+FUNC_GROUP_DECL(LPCHC, J19, J18, B22, B21, A21, H19, G17, H18);
+FUNC_GROUP_DECL(LPCPLUS, J19, J18, B22, B21, A21, H19, H18);
+
+#define A19 48
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1CK, SGPS1, COND1, SIG_DESC_SET(SCU84, 0));
+SS_PIN_DECL(A19, GPIOG0, SGPS1CK);
+
+#define E19 49
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1LD, SGPS1, COND1, SIG_DESC_SET(SCU84, 1));
+SS_PIN_DECL(E19, GPIOG1, SGPS1LD);
+
+#define C19 50
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1I0, SGPS1, COND1, SIG_DESC_SET(SCU84, 2));
+SS_PIN_DECL(C19, GPIOG2, SGPS1I0);
+
+#define E16 51
+SIG_EXPR_LIST_DECL_SINGLE(SGPS1I1, SGPS1, COND1, SIG_DESC_SET(SCU84, 3));
+SS_PIN_DECL(E16, GPIOG3, SGPS1I1);
+
+FUNC_GROUP_DECL(SGPS1, A19, E19, C19, E16);
+
+#define SGPS2_DESC SIG_DESC_SET(SCU94, 12)
+
+#define E17 52
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2CK, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT1, SALT1, COND1, SIG_DESC_SET(SCU84, 4));
+MS_PIN_DECL(E17, GPIOG4, SGPS2CK, SALT1);
+FUNC_GROUP_DECL(SALT1, E17);
+
+#define D16 53
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2LD, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT2, SALT2, COND1, SIG_DESC_SET(SCU84, 5));
+MS_PIN_DECL(D16, GPIOG5, SGPS2LD, SALT2);
+FUNC_GROUP_DECL(SALT2, D16);
+
+#define D15 54
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2I0, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT3, SALT3, COND1, SIG_DESC_SET(SCU84, 6));
+MS_PIN_DECL(D15, GPIOG6, SGPS2I0, SALT3);
+FUNC_GROUP_DECL(SALT3, D15);
+
+#define E14 55
+SIG_EXPR_LIST_DECL_SINGLE(SGPS2I1, SGPS2, COND1, SGPS2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(SALT4, SALT4, COND1, SIG_DESC_SET(SCU84, 7));
+MS_PIN_DECL(E14, GPIOG7, SGPS2I1, SALT4);
+FUNC_GROUP_DECL(SALT4, E14);
+
+FUNC_GROUP_DECL(SGPS2, E17, D16, D15, E14);
+
+#define UART6_DESC SIG_DESC_SET(SCU90, 7)
+
+#define A18 56
+SIG_EXPR_LIST_DECL_SINGLE(DASHA18, DASHA18, COND1, SIG_DESC_SET(SCU94, 5));
+SIG_EXPR_LIST_DECL_SINGLE(NCTS6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(A18, GPIOH0, DASHA18, NCTS6);
+
+#define B18 57
+SIG_EXPR_LIST_DECL_SINGLE(DASHB18, DASHB18, COND1, SIG_DESC_SET(SCU94, 5));
+SIG_EXPR_LIST_DECL_SINGLE(NDCD6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(B18, GPIOH1, DASHB18, NDCD6);
+
+#define D17 58
+SIG_EXPR_LIST_DECL_SINGLE(DASHD17, DASHD17, COND1, SIG_DESC_SET(SCU94, 6));
+SIG_EXPR_LIST_DECL_SINGLE(NDSR6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(D17, GPIOH2, DASHD17, NDSR6);
+
+#define C17 59
+SIG_EXPR_LIST_DECL_SINGLE(DASHC17, DASHC17, COND1, SIG_DESC_SET(SCU94, 6));
+SIG_EXPR_LIST_DECL_SINGLE(NRI6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(C17, GPIOH3, DASHC17, NRI6);
+
+#define A17 60
+SIG_EXPR_LIST_DECL_SINGLE(DASHA17, DASHA17, COND1, SIG_DESC_SET(SCU94, 7));
+SIG_EXPR_LIST_DECL_SINGLE(NDTR6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(A17, GPIOH4, DASHA17, NDTR6);
+
+#define B17 61
+SIG_EXPR_LIST_DECL_SINGLE(DASHB17, DASHB17, COND1, SIG_DESC_SET(SCU94, 7));
+SIG_EXPR_LIST_DECL_SINGLE(NRTS6, UART6, COND1, UART6_DESC);
+MS_PIN_DECL(B17, GPIOH5, DASHB17, NRTS6);
+
+#define A16 62
+SIG_EXPR_LIST_DECL_SINGLE(TXD6, UART6, COND1, UART6_DESC);
+SS_PIN_DECL(A16, GPIOH6, TXD6);
+
+#define D18 63
+SIG_EXPR_LIST_DECL_SINGLE(RXD6, UART6, COND1, UART6_DESC);
+SS_PIN_DECL(D18, GPIOH7, RXD6);
+
+FUNC_GROUP_DECL(UART6, A18, B18, D17, C17, A17, B17, A16, D18);
+
#define SPI1_DESC { HW_STRAP1, GENMASK(13, 12), 1, 0 }
#define SPI1DEBUG_DESC { HW_STRAP1, GENMASK(13, 12), 2, 0 }
#define SPI1PASSTHRU_DESC { HW_STRAP1, GENMASK(13, 12), 3, 0 }
@@ -277,6 +572,30 @@ SS_PIN_DECL(N3, GPIOJ2, SGPMO);
SIG_EXPR_LIST_DECL_SINGLE(SGPMI, SGPM, SIG_DESC_SET(SCU84, 11));
SS_PIN_DECL(N4, GPIOJ3, SGPMI);
+#define N5 76
+SIG_EXPR_LIST_DECL_SINGLE(VGAHS, VGAHS, SIG_DESC_SET(SCU84, 12));
+SIG_EXPR_LIST_DECL_SINGLE(DASHN5, DASHN5, SIG_DESC_SET(SCU94, 8));
+MS_PIN_DECL(N5, GPIOJ4, VGAHS, DASHN5);
+FUNC_GROUP_DECL(VGAHS, N5);
+
+#define R4 77
+SIG_EXPR_LIST_DECL_SINGLE(VGAVS, VGAVS, SIG_DESC_SET(SCU84, 13));
+SIG_EXPR_LIST_DECL_SINGLE(DASHR4, DASHR4, SIG_DESC_SET(SCU94, 8));
+MS_PIN_DECL(R4, GPIOJ5, VGAVS, DASHR4);
+FUNC_GROUP_DECL(VGAVS, R4);
+
+#define R3 78
+SIG_EXPR_LIST_DECL_SINGLE(DDCCLK, DDCCLK, SIG_DESC_SET(SCU84, 14));
+SIG_EXPR_LIST_DECL_SINGLE(DASHR3, DASHR3, SIG_DESC_SET(SCU94, 9));
+MS_PIN_DECL(R3, GPIOJ6, DDCCLK, DASHR3);
+FUNC_GROUP_DECL(DDCCLK, R3);
+
+#define T3 79
+SIG_EXPR_LIST_DECL_SINGLE(DDCDAT, DDCDAT, SIG_DESC_SET(SCU84, 15));
+SIG_EXPR_LIST_DECL_SINGLE(DASHT3, DASHT3, SIG_DESC_SET(SCU94, 9));
+MS_PIN_DECL(T3, GPIOJ7, DDCDAT, DASHT3);
+FUNC_GROUP_DECL(DDCDAT, T3);
+
#define I2C5_DESC SIG_DESC_SET(SCU90, 18)
#define L3 80
@@ -325,10 +644,119 @@ SS_PIN_DECL(R1, GPIOK7, SDA8);
FUNC_GROUP_DECL(I2C8, P2, R1);
+#define T2 88
+SSSF_PIN_DECL(T2, GPIOL0, NCTS1, SIG_DESC_SET(SCU84, 16));
+
#define VPIOFF0_DESC { SCU90, GENMASK(5, 4), 0, 0 }
#define VPIOFF1_DESC { SCU90, GENMASK(5, 4), 1, 0 }
#define VPI24_DESC { SCU90, GENMASK(5, 4), 2, 0 }
#define VPIRSVD_DESC { SCU90, GENMASK(5, 4), 3, 0 }
+#define VPI_24_RSVD_DESC SIG_DESC_SET(SCU90, 5)
+
+#define T1 89
+#define T1_DESC SIG_DESC_SET(SCU84, 17)
+SIG_EXPR_LIST_DECL_SINGLE(VPIDE, VPI24, VPI_24_RSVD_DESC, T1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD1, NDCD1, T1_DESC, COND2);
+MS_PIN_DECL(T1, GPIOL1, VPIDE, NDCD1);
+FUNC_GROUP_DECL(NDCD1, T1);
+
+#define U1 90
+#define U1_DESC SIG_DESC_SET(SCU84, 18)
+SIG_EXPR_LIST_DECL_SINGLE(DASHU1, VPI24, VPI_24_RSVD_DESC, U1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR1, NDSR1, U1_DESC);
+MS_PIN_DECL(U1, GPIOL2, DASHU1, NDSR1);
+FUNC_GROUP_DECL(NDSR1, U1);
+
+#define U2 91
+#define U2_DESC SIG_DESC_SET(SCU84, 19)
+SIG_EXPR_LIST_DECL_SINGLE(VPIHS, VPI24, VPI_24_RSVD_DESC, U2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRI1, NRI1, U2_DESC, COND2);
+MS_PIN_DECL(U2, GPIOL3, VPIHS, NRI1);
+FUNC_GROUP_DECL(NRI1, U2);
+
+#define P4 92
+#define P4_DESC SIG_DESC_SET(SCU84, 20)
+SIG_EXPR_LIST_DECL_SINGLE(VPIVS, VPI24, VPI_24_RSVD_DESC, P4_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR1, NDTR1, P4_DESC, COND2);
+MS_PIN_DECL(P4, GPIOL4, VPIVS, NDTR1);
+FUNC_GROUP_DECL(NDTR1, P4);
+
+#define P3 93
+#define P3_DESC SIG_DESC_SET(SCU84, 21)
+SIG_EXPR_LIST_DECL_SINGLE(VPICLK, VPI24, VPI_24_RSVD_DESC, P3_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS1, NRTS1, P3_DESC, COND2);
+MS_PIN_DECL(P3, GPIOL5, VPICLK, NRTS1);
+FUNC_GROUP_DECL(NRTS1, P3);
+
+#define V1 94
+#define V1_DESC SIG_DESC_SET(SCU84, 22)
+SIG_EXPR_LIST_DECL_SINGLE(DASHV1, DASHV1, VPIRSVD_DESC, V1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(TXD1, TXD1, V1_DESC, COND2);
+MS_PIN_DECL(V1, GPIOL6, DASHV1, TXD1);
+FUNC_GROUP_DECL(TXD1, V1);
+
+#define W1 95
+#define W1_DESC SIG_DESC_SET(SCU84, 23)
+SIG_EXPR_LIST_DECL_SINGLE(DASHW1, DASHW1, VPIRSVD_DESC, W1_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RXD1, RXD1, W1_DESC, COND2);
+MS_PIN_DECL(W1, GPIOL7, DASHW1, RXD1);
+FUNC_GROUP_DECL(RXD1, W1);
+
+#define Y1 96
+#define Y1_DESC SIG_DESC_SET(SCU84, 24)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB2, VPI24, VPI_24_RSVD_DESC, Y1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NCTS2, NCTS2, Y1_DESC, COND2);
+MS_PIN_DECL(Y1, GPIOM0, VPIB2, NCTS2);
+FUNC_GROUP_DECL(NCTS2, Y1);
+
+#define AB2 97
+#define AB2_DESC SIG_DESC_SET(SCU84, 25)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB3, VPI24, VPI_24_RSVD_DESC, AB2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDCD2, NDCD2, AB2_DESC, COND2);
+MS_PIN_DECL(AB2, GPIOM1, VPIB3, NDCD2);
+FUNC_GROUP_DECL(NDCD2, AB2);
+
+#define AA1 98
+#define AA1_DESC SIG_DESC_SET(SCU84, 26)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB4, VPI24, VPI_24_RSVD_DESC, AA1_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDSR2, NDSR2, AA1_DESC, COND2);
+MS_PIN_DECL(AA1, GPIOM2, VPIB4, NDSR2);
+FUNC_GROUP_DECL(NDSR2, AA1);
+
+#define Y2 99
+#define Y2_DESC SIG_DESC_SET(SCU84, 27)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB5, VPI24, VPI_24_RSVD_DESC, Y2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRI2, NRI2, Y2_DESC, COND2);
+MS_PIN_DECL(Y2, GPIOM3, VPIB5, NRI2);
+FUNC_GROUP_DECL(NRI2, Y2);
+
+#define AA2 100
+#define AA2_DESC SIG_DESC_SET(SCU84, 28)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB6, VPI24, VPI_24_RSVD_DESC, AA2_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NDTR2, NDTR2, AA2_DESC, COND2);
+MS_PIN_DECL(AA2, GPIOM4, VPIB6, NDTR2);
+FUNC_GROUP_DECL(NDTR2, AA2);
+
+#define P5 101
+#define P5_DESC SIG_DESC_SET(SCU84, 29)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB7, VPI24, VPI_24_RSVD_DESC, P5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(NRTS2, NRTS2, P5_DESC, COND2);
+MS_PIN_DECL(P5, GPIOM5, VPIB7, NRTS2);
+FUNC_GROUP_DECL(NRTS2, P5);
+
+#define R5 102
+#define R5_DESC SIG_DESC_SET(SCU84, 30)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB8, VPI24, VPI_24_RSVD_DESC, R5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(TXD2, TXD2, R5_DESC, COND2);
+MS_PIN_DECL(R5, GPIOM6, VPIB8, TXD2);
+FUNC_GROUP_DECL(TXD2, R5);
+
+#define T5 103
+#define T5_DESC SIG_DESC_SET(SCU84, 31)
+SIG_EXPR_LIST_DECL_SINGLE(VPIB9, VPI24, VPI_24_RSVD_DESC, T5_DESC, COND2);
+SIG_EXPR_LIST_DECL_SINGLE(RXD2, RXD2, T5_DESC, COND2);
+MS_PIN_DECL(T5, GPIOM7, VPIB9, RXD2);
+FUNC_GROUP_DECL(RXD2, T5);
#define V2 104
#define V2_DESC SIG_DESC_SET(SCU88, 0)
@@ -394,9 +822,88 @@ SIG_EXPR_LIST_DECL_SINGLE(PWM7, PWM7, T4_DESC, COND2);
MS_PIN_DECL(T4, GPION7, VPIG7, PWM7);
FUNC_GROUP_DECL(PWM7, T4);
+#define U5 112
+SIG_EXPR_LIST_DECL_SINGLE(VPIG8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 8),
+ COND2);
+SS_PIN_DECL(U5, GPIOO0, VPIG8);
+
+#define U4 113
+SIG_EXPR_LIST_DECL_SINGLE(VPIG9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 9),
+ COND2);
+SS_PIN_DECL(U4, GPIOO1, VPIG9);
+
+#define V5 114
+SIG_EXPR_LIST_DECL_SINGLE(DASHV5, DASHV5, VPI_24_RSVD_DESC,
+ SIG_DESC_SET(SCU88, 10));
+SS_PIN_DECL(V5, GPIOO2, DASHV5);
+
+#define AB4 115
+SIG_EXPR_LIST_DECL_SINGLE(DASHAB4, DASHAB4, VPI_24_RSVD_DESC,
+ SIG_DESC_SET(SCU88, 11));
+SS_PIN_DECL(AB4, GPIOO3, DASHAB4);
+
+#define AB3 116
+SIG_EXPR_LIST_DECL_SINGLE(VPIR2, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 12),
+ COND2);
+SS_PIN_DECL(AB3, GPIOO4, VPIR2);
+
+#define Y4 117
+SIG_EXPR_LIST_DECL_SINGLE(VPIR3, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 13),
+ COND2);
+SS_PIN_DECL(Y4, GPIOO5, VPIR3);
+
+#define AA4 118
+SIG_EXPR_LIST_DECL_SINGLE(VPIR4, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 14),
+ COND2);
+SS_PIN_DECL(AA4, GPIOO6, VPIR4);
+
+#define W4 119
+SIG_EXPR_LIST_DECL_SINGLE(VPIR5, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 15),
+ COND2);
+SS_PIN_DECL(W4, GPIOO7, VPIR5);
+
+#define V4 120
+SIG_EXPR_LIST_DECL_SINGLE(VPIR6, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 16),
+ COND2);
+SS_PIN_DECL(V4, GPIOP0, VPIR6);
+
+#define W5 121
+SIG_EXPR_LIST_DECL_SINGLE(VPIR7, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 17),
+ COND2);
+SS_PIN_DECL(W5, GPIOP1, VPIR7);
+
+#define AA5 122
+SIG_EXPR_LIST_DECL_SINGLE(VPIR8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 18),
+ COND2);
+SS_PIN_DECL(AA5, GPIOP2, VPIR8);
+
+#define AB5 123
+SIG_EXPR_LIST_DECL_SINGLE(VPIR9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 19),
+ COND2);
+SS_PIN_DECL(AB5, GPIOP3, VPIR9);
+
+FUNC_GROUP_DECL(VPI24, T1, U2, P4, P3, Y1, AB2, AA1, Y2, AA2, P5, R5, T5, V3,
+ U3, W3, AA3, Y3, T4, U5, U4, AB3, Y4, AA4, W4, V4, W5, AA5,
+ AB5);
+
+#define Y6 124
+SIG_EXPR_LIST_DECL_SINGLE(DASHY6, DASHY6, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 20));
+SS_PIN_DECL(Y6, GPIOP4, DASHY6);
+
+#define Y5 125
+SIG_EXPR_LIST_DECL_SINGLE(DASHY5, DASHY5, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 21));
+SS_PIN_DECL(Y5, GPIOP5, DASHY5);
+
+#define W6 126
+SIG_EXPR_LIST_DECL_SINGLE(DASHW6, DASHW6, SIG_DESC_SET(SCU90, 28),
+ SIG_DESC_SET(SCU88, 22));
+SS_PIN_DECL(W6, GPIOP6, DASHW6);
+
#define V6 127
SIG_EXPR_LIST_DECL_SINGLE(DASHV6, DASHV6, SIG_DESC_SET(SCU90, 28),
- SIG_DESC_SET(SCU88, 23));
+ SIG_DESC_SET(SCU88, 23));
SS_PIN_DECL(V6, GPIOP7, DASHV6);
#define I2C3_DESC SIG_DESC_SET(SCU90, 16)
@@ -441,6 +948,24 @@ SSSF_PIN_DECL(B10, GPIOQ6, OSCCLK, SIG_DESC_SET(SCU2C, 1));
#define N20 135
SSSF_PIN_DECL(N20, GPIOQ7, PEWAKE, SIG_DESC_SET(SCU2C, 29));
+#define AA19 136
+SSSF_PIN_DECL(AA19, GPIOR0, FWSPICS1, SIG_DESC_SET(SCU88, 24), COND2);
+
+#define T19 137
+SSSF_PIN_DECL(T19, GPIOR1, FWSPICS2, SIG_DESC_SET(SCU88, 25), COND2);
+
+#define T17 138
+SSSF_PIN_DECL(T17, GPIOR2, SPI2CS0, SIG_DESC_SET(SCU88, 26), COND2);
+
+#define Y19 139
+SSSF_PIN_DECL(Y19, GPIOR3, SPI2CK, SIG_DESC_SET(SCU88, 27), COND2);
+
+#define W19 140
+SSSF_PIN_DECL(W19, GPIOR4, SPI2MOSI, SIG_DESC_SET(SCU88, 28), COND2);
+
+#define V19 141
+SSSF_PIN_DECL(V19, GPIOR5, SPI2MISO, SIG_DESC_SET(SCU88, 29), COND2);
+
#define D8 142
SIG_EXPR_LIST_DECL_SINGLE(MDC1, MDIO1, SIG_DESC_SET(SCU88, 30));
SS_PIN_DECL(D8, GPIOR6, MDC1);
@@ -451,6 +976,93 @@ SS_PIN_DECL(E10, GPIOR7, MDIO1);
FUNC_GROUP_DECL(MDIO1, D8, E10);
+#define VPOOFF0_DESC { SCU94, GENMASK(1, 0), 0, 0 }
+#define VPO_DESC { SCU94, GENMASK(1, 0), 1, 0 }
+#define VPOOFF1_DESC { SCU94, GENMASK(1, 0), 2, 0 }
+#define VPOOFF2_DESC { SCU94, GENMASK(1, 0), 3, 0 }
+
+#define CRT_DVO_EN_DESC SIG_DESC_SET(GFX064, 7)
+
+#define V20 144
+#define V20_DESC SIG_DESC_SET(SCU8C, 0)
+SIG_EXPR_DECL(VPOB2, VPO, V20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF1, V20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF2, V20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB2, SIG_EXPR_PTR(VPOB2, VPO),
+ SIG_EXPR_PTR(VPOB2, VPOOFF1), SIG_EXPR_PTR(VPOB2, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SPI2CS1, SPI2CS1, V20_DESC);
+MS_PIN_DECL(V20, GPIOS0, VPOB2, SPI2CS1);
+FUNC_GROUP_DECL(SPI2CS1, V20);
+
+#define U19 145
+#define U19_DESC SIG_DESC_SET(SCU8C, 1)
+SIG_EXPR_DECL(VPOB3, VPO, U19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF1, U19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF2, U19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB3, SIG_EXPR_PTR(VPOB3, VPO),
+ SIG_EXPR_PTR(VPOB3, VPOOFF1), SIG_EXPR_PTR(VPOB3, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(BMCINT, BMCINT, U19_DESC);
+MS_PIN_DECL(U19, GPIOS1, VPOB3, BMCINT);
+FUNC_GROUP_DECL(BMCINT, U19);
+
+#define R18 146
+#define R18_DESC SIG_DESC_SET(SCU8C, 2)
+SIG_EXPR_DECL(VPOB4, VPO, R18_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF1, R18_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF2, R18_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB4, SIG_EXPR_PTR(VPOB4, VPO),
+ SIG_EXPR_PTR(VPOB4, VPOOFF1), SIG_EXPR_PTR(VPOB4, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT5, SALT5, R18_DESC);
+MS_PIN_DECL(R18, GPIOS2, VPOB4, SALT5);
+FUNC_GROUP_DECL(SALT5, R18);
+
+#define P18 147
+#define P18_DESC SIG_DESC_SET(SCU8C, 3)
+SIG_EXPR_DECL(VPOB5, VPO, P18_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF1, P18_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF2, P18_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB5, SIG_EXPR_PTR(VPOB5, VPO),
+ SIG_EXPR_PTR(VPOB5, VPOOFF1), SIG_EXPR_PTR(VPOB5, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT6, SALT6, P18_DESC);
+MS_PIN_DECL(P18, GPIOS3, VPOB5, SALT6);
+FUNC_GROUP_DECL(SALT6, P18);
+
+#define R19 148
+#define R19_DESC SIG_DESC_SET(SCU8C, 4)
+SIG_EXPR_DECL(VPOB6, VPO, R19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF1, R19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF2, R19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB6, SIG_EXPR_PTR(VPOB6, VPO),
+ SIG_EXPR_PTR(VPOB6, VPOOFF1), SIG_EXPR_PTR(VPOB6, VPOOFF2));
+SS_PIN_DECL(R19, GPIOS4, VPOB6);
+
+#define W20 149
+#define W20_DESC SIG_DESC_SET(SCU8C, 5)
+SIG_EXPR_DECL(VPOB7, VPO, W20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF1, W20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF2, W20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB7, SIG_EXPR_PTR(VPOB7, VPO),
+ SIG_EXPR_PTR(VPOB7, VPOOFF1), SIG_EXPR_PTR(VPOB7, VPOOFF2));
+SS_PIN_DECL(W20, GPIOS5, VPOB7);
+
+#define U20 150
+#define U20_DESC SIG_DESC_SET(SCU8C, 6)
+SIG_EXPR_DECL(VPOB8, VPO, U20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB8, VPOOFF1, U20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB8, VPOOFF2, U20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB8, SIG_EXPR_PTR(VPOB8, VPO),
+ SIG_EXPR_PTR(VPOB8, VPOOFF1), SIG_EXPR_PTR(VPOB8, VPOOFF2));
+SS_PIN_DECL(U20, GPIOS6, VPOB8);
+
+#define AA20 151
+#define AA20_DESC SIG_DESC_SET(SCU8C, 7)
+SIG_EXPR_DECL(VPOB9, VPO, AA20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB9, VPOOFF1, AA20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOB9, VPOOFF2, AA20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOB9, SIG_EXPR_PTR(VPOB9, VPO),
+ SIG_EXPR_PTR(VPOB9, VPOOFF1), SIG_EXPR_PTR(VPOB9, VPOOFF2));
+SS_PIN_DECL(AA20, GPIOS7, VPOB9);
+
/* RGMII1/RMII1 */
#define RMII1_DESC SIG_DESC_BIT(HW_STRAP1, 6, 0)
@@ -632,6 +1244,481 @@ MS_PIN_DECL_(E6, SIG_EXPR_LIST_PTR(GPIOV7), SIG_EXPR_LIST_PTR(RMII2RXER),
FUNC_GROUP_DECL(RGMII2, B2, B1, A2, B3, D5, D4, C2, C1, C3, D1, D2, E6);
FUNC_GROUP_DECL(RMII2, B2, B1, A2, B3, C2, C3, D1, D2, E6);
+#define F4 176
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW0, GPIOW0, SIG_DESC_SET(SCUA0, 24));
+SIG_EXPR_LIST_DECL_SINGLE(ADC0, ADC0);
+MS_PIN_DECL_(F4, SIG_EXPR_LIST_PTR(GPIOW0), SIG_EXPR_LIST_PTR(ADC0));
+FUNC_GROUP_DECL(ADC0, F4);
+
+#define F5 177
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW1, GPIOW1, SIG_DESC_SET(SCUA0, 25));
+SIG_EXPR_LIST_DECL_SINGLE(ADC1, ADC1);
+MS_PIN_DECL_(F5, SIG_EXPR_LIST_PTR(GPIOW1), SIG_EXPR_LIST_PTR(ADC1));
+FUNC_GROUP_DECL(ADC1, F5);
+
+#define E2 178
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW2, GPIOW2, SIG_DESC_SET(SCUA0, 26));
+SIG_EXPR_LIST_DECL_SINGLE(ADC2, ADC2);
+MS_PIN_DECL_(E2, SIG_EXPR_LIST_PTR(GPIOW2), SIG_EXPR_LIST_PTR(ADC2));
+FUNC_GROUP_DECL(ADC2, E2);
+
+#define E1 179
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW3, GPIOW3, SIG_DESC_SET(SCUA0, 27));
+SIG_EXPR_LIST_DECL_SINGLE(ADC3, ADC3);
+MS_PIN_DECL_(E1, SIG_EXPR_LIST_PTR(GPIOW3), SIG_EXPR_LIST_PTR(ADC3));
+FUNC_GROUP_DECL(ADC3, E1);
+
+#define F3 180
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW4, GPIOW4, SIG_DESC_SET(SCUA0, 28));
+SIG_EXPR_LIST_DECL_SINGLE(ADC4, ADC4);
+MS_PIN_DECL_(F3, SIG_EXPR_LIST_PTR(GPIOW4), SIG_EXPR_LIST_PTR(ADC4));
+FUNC_GROUP_DECL(ADC4, F3);
+
+#define E3 181
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW5, GPIOW5, SIG_DESC_SET(SCUA0, 29));
+SIG_EXPR_LIST_DECL_SINGLE(ADC5, ADC5);
+MS_PIN_DECL_(E3, SIG_EXPR_LIST_PTR(GPIOW5), SIG_EXPR_LIST_PTR(ADC5));
+FUNC_GROUP_DECL(ADC5, E3);
+
+#define G5 182
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW6, GPIOW6, SIG_DESC_SET(SCUA0, 30));
+SIG_EXPR_LIST_DECL_SINGLE(ADC6, ADC6);
+MS_PIN_DECL_(G5, SIG_EXPR_LIST_PTR(GPIOW6), SIG_EXPR_LIST_PTR(ADC6));
+FUNC_GROUP_DECL(ADC6, G5);
+
+#define G4 183
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW7, GPIOW7, SIG_DESC_SET(SCUA0, 31));
+SIG_EXPR_LIST_DECL_SINGLE(ADC7, ADC7);
+MS_PIN_DECL_(G4, SIG_EXPR_LIST_PTR(GPIOW7), SIG_EXPR_LIST_PTR(ADC7));
+FUNC_GROUP_DECL(ADC7, G4);
+
+#define F2 184
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX0, GPIOX0, SIG_DESC_SET(SCUA4, 0));
+SIG_EXPR_LIST_DECL_SINGLE(ADC8, ADC8);
+MS_PIN_DECL_(F2, SIG_EXPR_LIST_PTR(GPIOX0), SIG_EXPR_LIST_PTR(ADC8));
+FUNC_GROUP_DECL(ADC8, F2);
+
+#define G3 185
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX1, GPIOX1, SIG_DESC_SET(SCUA4, 1));
+SIG_EXPR_LIST_DECL_SINGLE(ADC9, ADC9);
+MS_PIN_DECL_(G3, SIG_EXPR_LIST_PTR(GPIOX1), SIG_EXPR_LIST_PTR(ADC9));
+FUNC_GROUP_DECL(ADC9, G3);
+
+#define G2 186
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX2, GPIOX2, SIG_DESC_SET(SCUA4, 2));
+SIG_EXPR_LIST_DECL_SINGLE(ADC10, ADC10);
+MS_PIN_DECL_(G2, SIG_EXPR_LIST_PTR(GPIOX2), SIG_EXPR_LIST_PTR(ADC10));
+FUNC_GROUP_DECL(ADC10, G2);
+
+#define F1 187
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX3, GPIOX3, SIG_DESC_SET(SCUA4, 3));
+SIG_EXPR_LIST_DECL_SINGLE(ADC11, ADC11);
+MS_PIN_DECL_(F1, SIG_EXPR_LIST_PTR(GPIOX3), SIG_EXPR_LIST_PTR(ADC11));
+FUNC_GROUP_DECL(ADC11, F1);
+
+#define H5 188
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX4, GPIOX4, SIG_DESC_SET(SCUA4, 4));
+SIG_EXPR_LIST_DECL_SINGLE(ADC12, ADC12);
+MS_PIN_DECL_(H5, SIG_EXPR_LIST_PTR(GPIOX4), SIG_EXPR_LIST_PTR(ADC12));
+FUNC_GROUP_DECL(ADC12, H5);
+
+#define G1 189
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX5, GPIOX5, SIG_DESC_SET(SCUA4, 5));
+SIG_EXPR_LIST_DECL_SINGLE(ADC13, ADC13);
+MS_PIN_DECL_(G1, SIG_EXPR_LIST_PTR(GPIOX5), SIG_EXPR_LIST_PTR(ADC13));
+FUNC_GROUP_DECL(ADC13, G1);
+
+#define H3 190
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX6, GPIOX6, SIG_DESC_SET(SCUA4, 6));
+SIG_EXPR_LIST_DECL_SINGLE(ADC14, ADC14);
+MS_PIN_DECL_(H3, SIG_EXPR_LIST_PTR(GPIOX6), SIG_EXPR_LIST_PTR(ADC14));
+FUNC_GROUP_DECL(ADC14, H3);
+
+#define H4 191
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX7, GPIOX7, SIG_DESC_SET(SCUA4, 7));
+SIG_EXPR_LIST_DECL_SINGLE(ADC15, ADC15);
+MS_PIN_DECL_(H4, SIG_EXPR_LIST_PTR(GPIOX7), SIG_EXPR_LIST_PTR(ADC15));
+FUNC_GROUP_DECL(ADC15, H4);
+
+#define ACPI_DESC SIG_DESC_SET(HW_STRAP1, 19)
+
+#define R22 192
+SIG_EXPR_DECL(SIOS3, SIOS3, SIG_DESC_SET(SCUA4, 8));
+SIG_EXPR_DECL(SIOS3, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS3, SIOS3, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHR22, DASHR22, SIG_DESC_SET(SCU94, 10));
+MS_PIN_DECL(R22, GPIOY0, SIOS3, DASHR22);
+FUNC_GROUP_DECL(SIOS3, R22);
+
+#define R21 193
+SIG_EXPR_DECL(SIOS5, SIOS5, SIG_DESC_SET(SCUA4, 9));
+SIG_EXPR_DECL(SIOS5, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS5, SIOS5, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHR21, DASHR21, SIG_DESC_SET(SCU94, 10));
+MS_PIN_DECL(R21, GPIOY1, SIOS5, DASHR21);
+FUNC_GROUP_DECL(SIOS5, R21);
+
+#define P22 194
+SIG_EXPR_DECL(SIOPWREQ, SIOPWREQ, SIG_DESC_SET(SCUA4, 10));
+SIG_EXPR_DECL(SIOPWREQ, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWREQ, SIOPWREQ, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHP22, DASHP22, SIG_DESC_SET(SCU94, 11));
+MS_PIN_DECL(P22, GPIOY2, SIOPWREQ, DASHP22);
+FUNC_GROUP_DECL(SIOPWREQ, P22);
+
+#define P21 195
+SIG_EXPR_DECL(SIOONCTRL, SIOONCTRL, SIG_DESC_SET(SCUA4, 11));
+SIG_EXPR_DECL(SIOONCTRL, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOONCTRL, SIOONCTRL, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(DASHP21, DASHP21, SIG_DESC_SET(SCU94, 11));
+MS_PIN_DECL(P21, GPIOY3, SIOONCTRL, DASHP21);
+FUNC_GROUP_DECL(SIOONCTRL, P21);
+
+#define M18 196
+SSSF_PIN_DECL(M18, GPIOY4, SCL1, SIG_DESC_SET(SCUA4, 12));
+
+#define M19 197
+SSSF_PIN_DECL(M19, GPIOY5, SDA1, SIG_DESC_SET(SCUA4, 13));
+
+#define M20 198
+SSSF_PIN_DECL(M20, GPIOY6, SCL2, SIG_DESC_SET(SCUA4, 14));
+
+#define P20 199
+SSSF_PIN_DECL(P20, GPIOY7, SDA2, SIG_DESC_SET(SCUA4, 15));
+
+#define PNOR_DESC SIG_DESC_SET(SCU90, 31)
+
+#define Y20 200
+#define Y20_DESC SIG_DESC_SET(SCUA4, 16)
+SIG_EXPR_DECL(VPOG2, VPO, Y20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF1, Y20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF2, Y20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG2, SIG_EXPR_PTR(VPOG2, VPO),
+ SIG_EXPR_PTR(VPOG2, VPOOFF1), SIG_EXPR_PTR(VPOG2, VPOOFF2));
+SIG_EXPR_DECL(SIOPBI, SIOPBI, Y20_DESC);
+SIG_EXPR_DECL(SIOPBI, ACPI, Y20_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPBI, SIOPBI, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA0, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ0, GPIOZ0);
+MS_PIN_DECL_(Y20, SIG_EXPR_LIST_PTR(VPOG2), SIG_EXPR_LIST_PTR(SIOPBI),
+ SIG_EXPR_LIST_PTR(NORA0), SIG_EXPR_LIST_PTR(GPIOZ0));
+FUNC_GROUP_DECL(SIOPBI, Y20);
+
+#define AB20 201
+#define AB20_DESC SIG_DESC_SET(SCUA4, 17)
+SIG_EXPR_DECL(VPOG3, VPO, AB20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF1, AB20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF2, AB20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG3, SIG_EXPR_PTR(VPOG3, VPO),
+ SIG_EXPR_PTR(VPOG3, VPOOFF1), SIG_EXPR_PTR(VPOG3, VPOOFF2));
+SIG_EXPR_DECL(SIOPWRGD, SIOPWRGD, AB20_DESC);
+SIG_EXPR_DECL(SIOPWRGD, ACPI, AB20_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWRGD, SIOPWRGD, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA1, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ1, GPIOZ1);
+MS_PIN_DECL_(AB20, SIG_EXPR_LIST_PTR(VPOG3), SIG_EXPR_LIST_PTR(SIOPWRGD),
+ SIG_EXPR_LIST_PTR(NORA1), SIG_EXPR_LIST_PTR(GPIOZ1));
+FUNC_GROUP_DECL(SIOPWRGD, AB20);
+
+#define AB21 202
+#define AB21_DESC SIG_DESC_SET(SCUA4, 18)
+SIG_EXPR_DECL(VPOG4, VPO, AB21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF1, AB21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF2, AB21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG4, SIG_EXPR_PTR(VPOG4, VPO),
+ SIG_EXPR_PTR(VPOG4, VPOOFF1), SIG_EXPR_PTR(VPOG4, VPOOFF2));
+SIG_EXPR_DECL(SIOPBO, SIOPBO, AB21_DESC);
+SIG_EXPR_DECL(SIOPBO, ACPI, AB21_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPBO, SIOPBO, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA2, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ2, GPIOZ2);
+MS_PIN_DECL_(AB21, SIG_EXPR_LIST_PTR(VPOG4), SIG_EXPR_LIST_PTR(SIOPBO),
+ SIG_EXPR_LIST_PTR(NORA2), SIG_EXPR_LIST_PTR(GPIOZ2));
+FUNC_GROUP_DECL(SIOPBO, AB21);
+
+#define AA21 203
+#define AA21_DESC SIG_DESC_SET(SCUA4, 19)
+SIG_EXPR_DECL(VPOG5, VPO, AA21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF1, AA21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF2, AA21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOG5, SIG_EXPR_PTR(VPOG5, VPO),
+ SIG_EXPR_PTR(VPOG5, VPOOFF1), SIG_EXPR_PTR(VPOG5, VPOOFF2));
+SIG_EXPR_DECL(SIOSCI, SIOSCI, AA21_DESC);
+SIG_EXPR_DECL(SIOSCI, ACPI, AA21_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOSCI, SIOSCI, ACPI);
+SIG_EXPR_LIST_DECL_SINGLE(NORA3, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOZ3, GPIOZ3);
+MS_PIN_DECL_(AA21, SIG_EXPR_LIST_PTR(VPOG5), SIG_EXPR_LIST_PTR(SIOSCI),
+ SIG_EXPR_LIST_PTR(NORA3), SIG_EXPR_LIST_PTR(GPIOZ3));
+FUNC_GROUP_DECL(SIOSCI, AA21);
+
+FUNC_GROUP_DECL(ACPI, R22, R21, P22, P21, Y20, AB20, AB21, AA21);
+
+/* CRT DVO disabled, configured for single-edge mode */
+#define CRT_DVO_DS_DESC { GFX064, GENMASK(7, 6), 0, 0 }
+
+/* CRT DVO disabled, configured for dual-edge mode */
+#define CRT_DVO_DD_DESC { GFX064, GENMASK(7, 6), 1, 1 }
+
+/* CRT DVO enabled, configured for single-edge mode */
+#define CRT_DVO_ES_DESC { GFX064, GENMASK(7, 6), 2, 2 }
+
+/* CRT DVO enabled, configured for dual-edge mode */
+#define CRT_DVO_ED_DESC { GFX064, GENMASK(7, 6), 3, 3 }
+
+#define U21 204
+#define U21_DESC SIG_DESC_SET(SCUA4, 20)
+SIG_EXPR_DECL(VPOG6, VPO, U21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF1, U21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF2, U21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG6, SIG_EXPR_PTR(VPOG6, VPO),
+ SIG_EXPR_PTR(VPOG6, VPOOFF1), SIG_EXPR_PTR(VPOG6, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA4, PNOR, PNOR_DESC);
+MS_PIN_DECL(U21, GPIOZ4, VPOG6, NORA4);
+
+#define W22 205
+#define W22_DESC SIG_DESC_SET(SCUA4, 21)
+SIG_EXPR_DECL(VPOG7, VPO, W22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF1, W22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF2, W22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG7, SIG_EXPR_PTR(VPOG7, VPO),
+ SIG_EXPR_PTR(VPOG7, VPOOFF1), SIG_EXPR_PTR(VPOG7, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA5, PNOR, PNOR_DESC);
+MS_PIN_DECL(W22, GPIOZ5, VPOG7, NORA5);
+
+#define V22 206
+#define V22_DESC SIG_DESC_SET(SCUA4, 22)
+SIG_EXPR_DECL(VPOG8, VPO, V22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG8, VPOOFF1, V22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG8, VPOOFF2, V22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG8, SIG_EXPR_PTR(VPOG8, VPO),
+ SIG_EXPR_PTR(VPOG8, VPOOFF1), SIG_EXPR_PTR(VPOG8, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA6, PNOR, PNOR_DESC);
+MS_PIN_DECL(V22, GPIOZ6, VPOG8, NORA6);
+
+#define W21 207
+#define W21_DESC SIG_DESC_SET(SCUA4, 23)
+SIG_EXPR_DECL(VPOG9, VPO, W21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG9, VPOOFF1, W21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOG9, VPOOFF2, W21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOG9, SIG_EXPR_PTR(VPOG9, VPO),
+ SIG_EXPR_PTR(VPOG9, VPOOFF1), SIG_EXPR_PTR(VPOG9, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORA7, PNOR, PNOR_DESC);
+MS_PIN_DECL(W21, GPIOZ7, VPOG9, NORA7);
+
+#define Y21 208
+#define Y21_DESC SIG_DESC_SET(SCUA4, 24)
+SIG_EXPR_DECL(VPOR2, VPO, Y21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF1, Y21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF2, Y21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR2, SIG_EXPR_PTR(VPOR2, VPO),
+ SIG_EXPR_PTR(VPOR2, VPOOFF1), SIG_EXPR_PTR(VPOR2, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT7, SALT7, Y21_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD0, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA0, GPIOAA0);
+MS_PIN_DECL_(Y21, SIG_EXPR_LIST_PTR(VPOR2), SIG_EXPR_LIST_PTR(SALT7),
+ SIG_EXPR_LIST_PTR(NORD0), SIG_EXPR_LIST_PTR(GPIOAA0));
+FUNC_GROUP_DECL(SALT7, Y21);
+
+#define V21 209
+#define V21_DESC SIG_DESC_SET(SCUA4, 25)
+SIG_EXPR_DECL(VPOR3, VPO, V21_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF1, V21_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF2, V21_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR3, SIG_EXPR_PTR(VPOR3, VPO),
+ SIG_EXPR_PTR(VPOR3, VPOOFF1), SIG_EXPR_PTR(VPOR3, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT8, SALT8, V21_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD1, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA1, GPIOAA1);
+MS_PIN_DECL_(V21, SIG_EXPR_LIST_PTR(VPOR3), SIG_EXPR_LIST_PTR(SALT8),
+ SIG_EXPR_LIST_PTR(NORD1), SIG_EXPR_LIST_PTR(GPIOAA1));
+FUNC_GROUP_DECL(SALT8, V21);
+
+#define Y22 210
+#define Y22_DESC SIG_DESC_SET(SCUA4, 26)
+SIG_EXPR_DECL(VPOR4, VPO, Y22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR4, VPOOFF1, Y22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR4, VPOOFF2, Y22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR4, SIG_EXPR_PTR(VPOR4, VPO),
+ SIG_EXPR_PTR(VPOR4, VPOOFF1), SIG_EXPR_PTR(VPOR4, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT9, SALT9, Y22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD2, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA2, GPIOAA2);
+MS_PIN_DECL_(Y22, SIG_EXPR_LIST_PTR(VPOR4), SIG_EXPR_LIST_PTR(SALT9),
+ SIG_EXPR_LIST_PTR(NORD2), SIG_EXPR_LIST_PTR(GPIOAA2));
+FUNC_GROUP_DECL(SALT9, Y22);
+
+#define AA22 211
+#define AA22_DESC SIG_DESC_SET(SCUA4, 27)
+SIG_EXPR_DECL(VPOR5, VPO, AA22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR5, VPOOFF1, AA22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR5, VPOOFF2, AA22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR5, SIG_EXPR_PTR(VPOR5, VPO),
+ SIG_EXPR_PTR(VPOR5, VPOOFF1), SIG_EXPR_PTR(VPOR5, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT10, SALT10, AA22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD3, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA3, GPIOAA3);
+MS_PIN_DECL_(AA22, SIG_EXPR_LIST_PTR(VPOR5), SIG_EXPR_LIST_PTR(SALT10),
+ SIG_EXPR_LIST_PTR(NORD3), SIG_EXPR_LIST_PTR(GPIOAA3));
+FUNC_GROUP_DECL(SALT10, AA22);
+
+#define U22 212
+#define U22_DESC SIG_DESC_SET(SCUA4, 28)
+SIG_EXPR_DECL(VPOR6, VPO, U22_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR6, VPOOFF1, U22_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR6, VPOOFF2, U22_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR6, SIG_EXPR_PTR(VPOR6, VPO),
+ SIG_EXPR_PTR(VPOR6, VPOOFF1), SIG_EXPR_PTR(VPOR6, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT11, SALT11, U22_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD4, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA4, GPIOAA4);
+MS_PIN_DECL_(U22, SIG_EXPR_LIST_PTR(VPOR6), SIG_EXPR_LIST_PTR(SALT11),
+ SIG_EXPR_LIST_PTR(NORD4), SIG_EXPR_LIST_PTR(GPIOAA4));
+FUNC_GROUP_DECL(SALT11, U22);
+
+#define T20 213
+#define T20_DESC SIG_DESC_SET(SCUA4, 29)
+SIG_EXPR_DECL(VPOR7, VPO, T20_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR7, VPOOFF1, T20_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR7, VPOOFF2, T20_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR7, SIG_EXPR_PTR(VPOR7, VPO),
+ SIG_EXPR_PTR(VPOR7, VPOOFF1), SIG_EXPR_PTR(VPOR7, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT12, SALT12, T20_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD5, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA5, GPIOAA5);
+MS_PIN_DECL_(T20, SIG_EXPR_LIST_PTR(VPOR7), SIG_EXPR_LIST_PTR(SALT12),
+ SIG_EXPR_LIST_PTR(NORD5), SIG_EXPR_LIST_PTR(GPIOAA5));
+FUNC_GROUP_DECL(SALT12, T20);
+
+#define N18 214
+#define N18_DESC SIG_DESC_SET(SCUA4, 30)
+SIG_EXPR_DECL(VPOR8, VPO, N18_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR8, VPOOFF1, N18_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR8, VPOOFF2, N18_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR8, SIG_EXPR_PTR(VPOR8, VPO),
+ SIG_EXPR_PTR(VPOR8, VPOOFF1), SIG_EXPR_PTR(VPOR8, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT13, SALT13, N18_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD6, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA6, GPIOAA6);
+MS_PIN_DECL_(N18, SIG_EXPR_LIST_PTR(VPOR8), SIG_EXPR_LIST_PTR(SALT13),
+ SIG_EXPR_LIST_PTR(NORD6), SIG_EXPR_LIST_PTR(GPIOAA6));
+FUNC_GROUP_DECL(SALT13, N18);
+
+#define P19 215
+#define P19_DESC SIG_DESC_SET(SCUA4, 31)
+SIG_EXPR_DECL(VPOR9, VPO, P19_DESC, VPO_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR9, VPOOFF1, P19_DESC, VPOOFF1_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_DECL(VPOR9, VPOOFF2, P19_DESC, VPOOFF2_DESC, CRT_DVO_ES_DESC);
+SIG_EXPR_LIST_DECL(VPOR9, SIG_EXPR_PTR(VPOR9, VPO),
+ SIG_EXPR_PTR(VPOR9, VPOOFF1), SIG_EXPR_PTR(VPOR9, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(SALT14, SALT14, P19_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(NORD7, PNOR, PNOR_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(GPIOAA7, GPIOAA7);
+MS_PIN_DECL_(P19, SIG_EXPR_LIST_PTR(VPOR9), SIG_EXPR_LIST_PTR(SALT14),
+ SIG_EXPR_LIST_PTR(NORD7), SIG_EXPR_LIST_PTR(GPIOAA7));
+FUNC_GROUP_DECL(SALT14, P19);
+
+#define N19 216
+#define N19_DESC SIG_DESC_SET(SCUA8, 0)
+SIG_EXPR_DECL(VPODE, VPO, N19_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPODE, VPOOFF1, N19_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPODE, VPOOFF2, N19_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPODE, SIG_EXPR_PTR(VPODE, VPO),
+ SIG_EXPR_PTR(VPODE, VPOOFF1), SIG_EXPR_PTR(VPODE, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NOROE, PNOR, PNOR_DESC);
+MS_PIN_DECL(N19, GPIOAB0, VPODE, NOROE);
+
+#define T21 217
+#define T21_DESC SIG_DESC_SET(SCUA8, 1)
+SIG_EXPR_DECL(VPOHS, VPO, T21_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOHS, VPOOFF1, T21_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOHS, VPOOFF2, T21_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOHS, SIG_EXPR_PTR(VPOHS, VPO),
+ SIG_EXPR_PTR(VPOHS, VPOOFF1), SIG_EXPR_PTR(VPOHS, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(NORWE, PNOR, PNOR_DESC);
+MS_PIN_DECL(T21, GPIOAB1, VPOHS, NORWE);
+
+FUNC_GROUP_DECL(PNOR, Y20, AB20, AB21, AA21, U21, W22, V22, W21, Y21, V21, Y22,
+ AA22, U22, T20, N18, P19, N19, T21);
+
+#define T22 218
+#define T22_DESC SIG_DESC_SET(SCUA8, 2)
+SIG_EXPR_DECL(VPOVS, VPO, T22_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOVS, VPOOFF1, T22_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOVS, VPOOFF2, T22_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOVS, SIG_EXPR_PTR(VPOVS, VPO),
+ SIG_EXPR_PTR(VPOVS, VPOOFF1), SIG_EXPR_PTR(VPOVS, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST1, WDTRST1, T22_DESC);
+MS_PIN_DECL(T22, GPIOAB2, VPOVS, WDTRST1);
+FUNC_GROUP_DECL(WDTRST1, T22);
+
+#define R20 219
+#define R20_DESC SIG_DESC_SET(SCUA8, 3)
+SIG_EXPR_DECL(VPOCLK, VPO, R20_DESC, VPO_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOCLK, VPOOFF1, R20_DESC, VPOOFF1_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_DECL(VPOCLK, VPOOFF2, R20_DESC, VPOOFF2_DESC, CRT_DVO_EN_DESC);
+SIG_EXPR_LIST_DECL(VPOCLK, SIG_EXPR_PTR(VPOCLK, VPO),
+ SIG_EXPR_PTR(VPOCLK, VPOOFF1), SIG_EXPR_PTR(VPOCLK, VPOOFF2));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST2, WDTRST2, R20_DESC);
+MS_PIN_DECL(R20, GPIOAB3, VPOCLK, WDTRST2);
+FUNC_GROUP_DECL(WDTRST2, R20);
+
+FUNC_GROUP_DECL(VPO, V20, U19, R18, P18, R19, W20, U20, AA20, Y20, AB20,
+ AB21, AA21, U21, W22, V22, W21, Y21, V21, Y22, AA22, U22, T20,
+ N18, P19, N19, T21, T22, R20);
+
+#define ESPI_DESC SIG_DESC_SET(HW_STRAP1, 25)
+
+#define G21 224
+SIG_EXPR_LIST_DECL_SINGLE(ESPID0, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD0, LAD0, SIG_DESC_SET(SCUAC, 0));
+MS_PIN_DECL(G21, GPIOAC0, ESPID0, LAD0);
+FUNC_GROUP_DECL(LAD0, G21);
+
+#define G20 225
+SIG_EXPR_LIST_DECL_SINGLE(ESPID1, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD1, LAD1, SIG_DESC_SET(SCUAC, 1));
+MS_PIN_DECL(G20, GPIOAC1, ESPID1, LAD1);
+FUNC_GROUP_DECL(LAD1, G20);
+
+#define D22 226
+SIG_EXPR_LIST_DECL_SINGLE(ESPID2, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD2, LAD2, SIG_DESC_SET(SCUAC, 2));
+MS_PIN_DECL(D22, GPIOAC2, ESPID2, LAD2);
+FUNC_GROUP_DECL(LAD2, D22);
+
+#define E22 227
+SIG_EXPR_LIST_DECL_SINGLE(ESPID3, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LAD3, LAD3, SIG_DESC_SET(SCUAC, 3));
+MS_PIN_DECL(E22, GPIOAC3, ESPID3, LAD3);
+FUNC_GROUP_DECL(LAD3, E22);
+
+#define C22 228
+SIG_EXPR_LIST_DECL_SINGLE(ESPICK, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LCLK, LCLK, SIG_DESC_SET(SCUAC, 4));
+MS_PIN_DECL(C22, GPIOAC4, ESPICK, LCLK);
+FUNC_GROUP_DECL(LCLK, C22);
+
+#define F21 229
+SIG_EXPR_LIST_DECL_SINGLE(ESPICS, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LFRAME, LFRAME, SIG_DESC_SET(SCUAC, 5));
+MS_PIN_DECL(F21, GPIOAC5, ESPICS, LFRAME);
+FUNC_GROUP_DECL(LFRAME, F21);
+
+#define F22 230
+SIG_EXPR_LIST_DECL_SINGLE(ESPIALT, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LSIRQ, LSIRQ, SIG_DESC_SET(SCUAC, 6));
+MS_PIN_DECL(F22, GPIOAC6, ESPIALT, LSIRQ);
+FUNC_GROUP_DECL(LSIRQ, F22);
+
+#define G22 231
+SIG_EXPR_LIST_DECL_SINGLE(ESPIRST, ESPI, ESPI_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LPCRST, LPCRST, SIG_DESC_SET(SCUAC, 7));
+MS_PIN_DECL(G22, GPIOAC7, ESPIRST, LPCRST);
+FUNC_GROUP_DECL(LPCRST, G22);
+
+FUNC_GROUP_DECL(ESPI, G21, G20, D22, E22, C22, F21, F22, G22);
+
/* Pins, groups and functions are sort(1):ed alphabetically for sanity */
static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
@@ -641,12 +1728,32 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(A13),
ASPEED_PINCTRL_PIN(A14),
ASPEED_PINCTRL_PIN(A15),
+ ASPEED_PINCTRL_PIN(A16),
+ ASPEED_PINCTRL_PIN(A17),
+ ASPEED_PINCTRL_PIN(A18),
+ ASPEED_PINCTRL_PIN(A19),
ASPEED_PINCTRL_PIN(A2),
+ ASPEED_PINCTRL_PIN(A20),
+ ASPEED_PINCTRL_PIN(A21),
ASPEED_PINCTRL_PIN(A3),
ASPEED_PINCTRL_PIN(A4),
ASPEED_PINCTRL_PIN(A5),
ASPEED_PINCTRL_PIN(A9),
+ ASPEED_PINCTRL_PIN(AA1),
+ ASPEED_PINCTRL_PIN(AA19),
+ ASPEED_PINCTRL_PIN(AA2),
+ ASPEED_PINCTRL_PIN(AA20),
+ ASPEED_PINCTRL_PIN(AA21),
+ ASPEED_PINCTRL_PIN(AA22),
ASPEED_PINCTRL_PIN(AA3),
+ ASPEED_PINCTRL_PIN(AA4),
+ ASPEED_PINCTRL_PIN(AA5),
+ ASPEED_PINCTRL_PIN(AB2),
+ ASPEED_PINCTRL_PIN(AB20),
+ ASPEED_PINCTRL_PIN(AB21),
+ ASPEED_PINCTRL_PIN(AB3),
+ ASPEED_PINCTRL_PIN(AB4),
+ ASPEED_PINCTRL_PIN(AB5),
ASPEED_PINCTRL_PIN(B1),
ASPEED_PINCTRL_PIN(B10),
ASPEED_PINCTRL_PIN(B11),
@@ -655,8 +1762,13 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(B14),
ASPEED_PINCTRL_PIN(B15),
ASPEED_PINCTRL_PIN(B16),
+ ASPEED_PINCTRL_PIN(B17),
+ ASPEED_PINCTRL_PIN(B18),
+ ASPEED_PINCTRL_PIN(B19),
ASPEED_PINCTRL_PIN(B2),
ASPEED_PINCTRL_PIN(B20),
+ ASPEED_PINCTRL_PIN(B21),
+ ASPEED_PINCTRL_PIN(B22),
ASPEED_PINCTRL_PIN(B3),
ASPEED_PINCTRL_PIN(B4),
ASPEED_PINCTRL_PIN(B5),
@@ -668,62 +1780,210 @@ static struct pinctrl_pin_desc aspeed_g5_pins[ASPEED_G5_NR_PINS] = {
ASPEED_PINCTRL_PIN(C14),
ASPEED_PINCTRL_PIN(C15),
ASPEED_PINCTRL_PIN(C16),
+ ASPEED_PINCTRL_PIN(C17),
ASPEED_PINCTRL_PIN(C18),
+ ASPEED_PINCTRL_PIN(C19),
ASPEED_PINCTRL_PIN(C2),
ASPEED_PINCTRL_PIN(C20),
+ ASPEED_PINCTRL_PIN(C21),
+ ASPEED_PINCTRL_PIN(C22),
ASPEED_PINCTRL_PIN(C3),
ASPEED_PINCTRL_PIN(C4),
ASPEED_PINCTRL_PIN(C5),
ASPEED_PINCTRL_PIN(D1),
ASPEED_PINCTRL_PIN(D10),
+ ASPEED_PINCTRL_PIN(D13),
+ ASPEED_PINCTRL_PIN(D14),
+ ASPEED_PINCTRL_PIN(D15),
+ ASPEED_PINCTRL_PIN(D16),
+ ASPEED_PINCTRL_PIN(D17),
+ ASPEED_PINCTRL_PIN(D18),
+ ASPEED_PINCTRL_PIN(D19),
ASPEED_PINCTRL_PIN(D2),
ASPEED_PINCTRL_PIN(D20),
+ ASPEED_PINCTRL_PIN(D21),
+ ASPEED_PINCTRL_PIN(D22),
ASPEED_PINCTRL_PIN(D4),
ASPEED_PINCTRL_PIN(D5),
ASPEED_PINCTRL_PIN(D6),
ASPEED_PINCTRL_PIN(D7),
ASPEED_PINCTRL_PIN(D8),
ASPEED_PINCTRL_PIN(D9),
+ ASPEED_PINCTRL_PIN(E1),
ASPEED_PINCTRL_PIN(E10),
ASPEED_PINCTRL_PIN(E12),
ASPEED_PINCTRL_PIN(E13),
+ ASPEED_PINCTRL_PIN(E14),
ASPEED_PINCTRL_PIN(E15),
+ ASPEED_PINCTRL_PIN(E16),
+ ASPEED_PINCTRL_PIN(E17),
+ ASPEED_PINCTRL_PIN(E18),
+ ASPEED_PINCTRL_PIN(E19),
+ ASPEED_PINCTRL_PIN(E2),
+ ASPEED_PINCTRL_PIN(E20),
ASPEED_PINCTRL_PIN(E21),
+ ASPEED_PINCTRL_PIN(E22),
+ ASPEED_PINCTRL_PIN(E3),
ASPEED_PINCTRL_PIN(E6),
ASPEED_PINCTRL_PIN(E7),
ASPEED_PINCTRL_PIN(E9),
+ ASPEED_PINCTRL_PIN(F1),
+ ASPEED_PINCTRL_PIN(F17),
+ ASPEED_PINCTRL_PIN(F18),
ASPEED_PINCTRL_PIN(F19),
+ ASPEED_PINCTRL_PIN(F2),
ASPEED_PINCTRL_PIN(F20),
+ ASPEED_PINCTRL_PIN(F21),
+ ASPEED_PINCTRL_PIN(F22),
+ ASPEED_PINCTRL_PIN(F3),
+ ASPEED_PINCTRL_PIN(F4),
+ ASPEED_PINCTRL_PIN(F5),
ASPEED_PINCTRL_PIN(F9),
+ ASPEED_PINCTRL_PIN(G1),
+ ASPEED_PINCTRL_PIN(G17),
+ ASPEED_PINCTRL_PIN(G18),
+ ASPEED_PINCTRL_PIN(G2),
+ ASPEED_PINCTRL_PIN(G20),
+ ASPEED_PINCTRL_PIN(G21),
+ ASPEED_PINCTRL_PIN(G22),
+ ASPEED_PINCTRL_PIN(G3),
+ ASPEED_PINCTRL_PIN(G4),
+ ASPEED_PINCTRL_PIN(G5),
+ ASPEED_PINCTRL_PIN(H18),
+ ASPEED_PINCTRL_PIN(H19),
ASPEED_PINCTRL_PIN(H20),
+ ASPEED_PINCTRL_PIN(H21),
+ ASPEED_PINCTRL_PIN(H22),
+ ASPEED_PINCTRL_PIN(H3),
+ ASPEED_PINCTRL_PIN(H4),
+ ASPEED_PINCTRL_PIN(H5),
+ ASPEED_PINCTRL_PIN(J18),
+ ASPEED_PINCTRL_PIN(J19),
+ ASPEED_PINCTRL_PIN(J20),
+ ASPEED_PINCTRL_PIN(K18),
+ ASPEED_PINCTRL_PIN(K19),
ASPEED_PINCTRL_PIN(L1),
+ ASPEED_PINCTRL_PIN(L18),
+ ASPEED_PINCTRL_PIN(L19),
ASPEED_PINCTRL_PIN(L2),
ASPEED_PINCTRL_PIN(L3),
ASPEED_PINCTRL_PIN(L4),
+ ASPEED_PINCTRL_PIN(M18),
+ ASPEED_PINCTRL_PIN(M19),
+ ASPEED_PINCTRL_PIN(M20),
ASPEED_PINCTRL_PIN(N1),
+ ASPEED_PINCTRL_PIN(N18),
+ ASPEED_PINCTRL_PIN(N19),
ASPEED_PINCTRL_PIN(N2),
ASPEED_PINCTRL_PIN(N20),
ASPEED_PINCTRL_PIN(N21),
ASPEED_PINCTRL_PIN(N22),
ASPEED_PINCTRL_PIN(N3),
ASPEED_PINCTRL_PIN(N4),
+ ASPEED_PINCTRL_PIN(N5),
ASPEED_PINCTRL_PIN(P1),
+ ASPEED_PINCTRL_PIN(P18),
+ ASPEED_PINCTRL_PIN(P19),
ASPEED_PINCTRL_PIN(P2),
+ ASPEED_PINCTRL_PIN(P20),
+ ASPEED_PINCTRL_PIN(P21),
+ ASPEED_PINCTRL_PIN(P22),
+ ASPEED_PINCTRL_PIN(P3),
+ ASPEED_PINCTRL_PIN(P4),
+ ASPEED_PINCTRL_PIN(P5),
ASPEED_PINCTRL_PIN(R1),
+ ASPEED_PINCTRL_PIN(R18),
+ ASPEED_PINCTRL_PIN(R19),
+ ASPEED_PINCTRL_PIN(R2),
+ ASPEED_PINCTRL_PIN(R20),
+ ASPEED_PINCTRL_PIN(R21),
+ ASPEED_PINCTRL_PIN(R22),
+ ASPEED_PINCTRL_PIN(R3),
+ ASPEED_PINCTRL_PIN(R4),
+ ASPEED_PINCTRL_PIN(R5),
+ ASPEED_PINCTRL_PIN(T1),
+ ASPEED_PINCTRL_PIN(T17),
+ ASPEED_PINCTRL_PIN(T19),
+ ASPEED_PINCTRL_PIN(T2),
+ ASPEED_PINCTRL_PIN(T20),
+ ASPEED_PINCTRL_PIN(T21),
+ ASPEED_PINCTRL_PIN(T22),
+ ASPEED_PINCTRL_PIN(T3),
ASPEED_PINCTRL_PIN(T4),
+ ASPEED_PINCTRL_PIN(T5),
+ ASPEED_PINCTRL_PIN(U1),
+ ASPEED_PINCTRL_PIN(U19),
+ ASPEED_PINCTRL_PIN(U2),
+ ASPEED_PINCTRL_PIN(U20),
+ ASPEED_PINCTRL_PIN(U21),
+ ASPEED_PINCTRL_PIN(U22),
ASPEED_PINCTRL_PIN(U3),
+ ASPEED_PINCTRL_PIN(U4),
+ ASPEED_PINCTRL_PIN(U5),
+ ASPEED_PINCTRL_PIN(V1),
+ ASPEED_PINCTRL_PIN(V19),
ASPEED_PINCTRL_PIN(V2),
+ ASPEED_PINCTRL_PIN(V20),
+ ASPEED_PINCTRL_PIN(V21),
+ ASPEED_PINCTRL_PIN(V22),
ASPEED_PINCTRL_PIN(V3),
+ ASPEED_PINCTRL_PIN(V4),
+ ASPEED_PINCTRL_PIN(V5),
ASPEED_PINCTRL_PIN(V6),
+ ASPEED_PINCTRL_PIN(W1),
+ ASPEED_PINCTRL_PIN(W19),
ASPEED_PINCTRL_PIN(W2),
+ ASPEED_PINCTRL_PIN(W20),
+ ASPEED_PINCTRL_PIN(W21),
+ ASPEED_PINCTRL_PIN(W22),
ASPEED_PINCTRL_PIN(W3),
+ ASPEED_PINCTRL_PIN(W4),
+ ASPEED_PINCTRL_PIN(W5),
+ ASPEED_PINCTRL_PIN(W6),
+ ASPEED_PINCTRL_PIN(Y1),
+ ASPEED_PINCTRL_PIN(Y19),
+ ASPEED_PINCTRL_PIN(Y2),
+ ASPEED_PINCTRL_PIN(Y20),
+ ASPEED_PINCTRL_PIN(Y21),
+ ASPEED_PINCTRL_PIN(Y22),
ASPEED_PINCTRL_PIN(Y3),
+ ASPEED_PINCTRL_PIN(Y4),
+ ASPEED_PINCTRL_PIN(Y5),
+ ASPEED_PINCTRL_PIN(Y6),
};
static const struct aspeed_pin_group aspeed_g5_groups[] = {
+ ASPEED_PINCTRL_GROUP(ACPI),
+ ASPEED_PINCTRL_GROUP(ADC0),
+ ASPEED_PINCTRL_GROUP(ADC1),
+ ASPEED_PINCTRL_GROUP(ADC10),
+ ASPEED_PINCTRL_GROUP(ADC11),
+ ASPEED_PINCTRL_GROUP(ADC12),
+ ASPEED_PINCTRL_GROUP(ADC13),
+ ASPEED_PINCTRL_GROUP(ADC14),
+ ASPEED_PINCTRL_GROUP(ADC15),
+ ASPEED_PINCTRL_GROUP(ADC2),
+ ASPEED_PINCTRL_GROUP(ADC3),
+ ASPEED_PINCTRL_GROUP(ADC4),
+ ASPEED_PINCTRL_GROUP(ADC5),
+ ASPEED_PINCTRL_GROUP(ADC6),
+ ASPEED_PINCTRL_GROUP(ADC7),
+ ASPEED_PINCTRL_GROUP(ADC8),
+ ASPEED_PINCTRL_GROUP(ADC9),
+ ASPEED_PINCTRL_GROUP(BMCINT),
+ ASPEED_PINCTRL_GROUP(DDCCLK),
+ ASPEED_PINCTRL_GROUP(DDCDAT),
+ ASPEED_PINCTRL_GROUP(ESPI),
+ ASPEED_PINCTRL_GROUP(FWSPICS1),
+ ASPEED_PINCTRL_GROUP(FWSPICS2),
ASPEED_PINCTRL_GROUP(GPID0),
ASPEED_PINCTRL_GROUP(GPID2),
+ ASPEED_PINCTRL_GROUP(GPID4),
+ ASPEED_PINCTRL_GROUP(GPID6),
ASPEED_PINCTRL_GROUP(GPIE0),
+ ASPEED_PINCTRL_GROUP(GPIE2),
+ ASPEED_PINCTRL_GROUP(GPIE4),
+ ASPEED_PINCTRL_GROUP(GPIE6),
ASPEED_PINCTRL_GROUP(I2C10),
ASPEED_PINCTRL_GROUP(I2C11),
ASPEED_PINCTRL_GROUP(I2C12),
@@ -736,11 +1996,50 @@ static const struct aspeed_pin_group aspeed_g5_groups[] = {
ASPEED_PINCTRL_GROUP(I2C7),
ASPEED_PINCTRL_GROUP(I2C8),
ASPEED_PINCTRL_GROUP(I2C9),
+ ASPEED_PINCTRL_GROUP(LAD0),
+ ASPEED_PINCTRL_GROUP(LAD1),
+ ASPEED_PINCTRL_GROUP(LAD2),
+ ASPEED_PINCTRL_GROUP(LAD3),
+ ASPEED_PINCTRL_GROUP(LCLK),
+ ASPEED_PINCTRL_GROUP(LFRAME),
+ ASPEED_PINCTRL_GROUP(LPCHC),
+ ASPEED_PINCTRL_GROUP(LPCPD),
+ ASPEED_PINCTRL_GROUP(LPCPLUS),
+ ASPEED_PINCTRL_GROUP(LPCPME),
+ ASPEED_PINCTRL_GROUP(LPCRST),
+ ASPEED_PINCTRL_GROUP(LPCSMI),
+ ASPEED_PINCTRL_GROUP(LSIRQ),
ASPEED_PINCTRL_GROUP(MAC1LINK),
+ ASPEED_PINCTRL_GROUP(MAC2LINK),
ASPEED_PINCTRL_GROUP(MDIO1),
ASPEED_PINCTRL_GROUP(MDIO2),
+ ASPEED_PINCTRL_GROUP(NCTS1),
+ ASPEED_PINCTRL_GROUP(NCTS2),
+ ASPEED_PINCTRL_GROUP(NCTS3),
+ ASPEED_PINCTRL_GROUP(NCTS4),
+ ASPEED_PINCTRL_GROUP(NDCD1),
+ ASPEED_PINCTRL_GROUP(NDCD2),
+ ASPEED_PINCTRL_GROUP(NDCD3),
+ ASPEED_PINCTRL_GROUP(NDCD4),
+ ASPEED_PINCTRL_GROUP(NDSR1),
+ ASPEED_PINCTRL_GROUP(NDSR2),
+ ASPEED_PINCTRL_GROUP(NDSR3),
+ ASPEED_PINCTRL_GROUP(NDSR4),
+ ASPEED_PINCTRL_GROUP(NDTR1),
+ ASPEED_PINCTRL_GROUP(NDTR2),
+ ASPEED_PINCTRL_GROUP(NDTR3),
+ ASPEED_PINCTRL_GROUP(NDTR4),
+ ASPEED_PINCTRL_GROUP(NRI1),
+ ASPEED_PINCTRL_GROUP(NRI2),
+ ASPEED_PINCTRL_GROUP(NRI3),
+ ASPEED_PINCTRL_GROUP(NRI4),
+ ASPEED_PINCTRL_GROUP(NRTS1),
+ ASPEED_PINCTRL_GROUP(NRTS2),
+ ASPEED_PINCTRL_GROUP(NRTS3),
+ ASPEED_PINCTRL_GROUP(NRTS4),
ASPEED_PINCTRL_GROUP(OSCCLK),
ASPEED_PINCTRL_GROUP(PEWAKE),
+ ASPEED_PINCTRL_GROUP(PNOR),
ASPEED_PINCTRL_GROUP(PWM0),
ASPEED_PINCTRL_GROUP(PWM1),
ASPEED_PINCTRL_GROUP(PWM2),
@@ -753,22 +2052,102 @@ static const struct aspeed_pin_group aspeed_g5_groups[] = {
ASPEED_PINCTRL_GROUP(RGMII2),
ASPEED_PINCTRL_GROUP(RMII1),
ASPEED_PINCTRL_GROUP(RMII2),
+ ASPEED_PINCTRL_GROUP(RXD1),
+ ASPEED_PINCTRL_GROUP(RXD2),
+ ASPEED_PINCTRL_GROUP(RXD3),
+ ASPEED_PINCTRL_GROUP(RXD4),
+ ASPEED_PINCTRL_GROUP(SALT1),
+ ASPEED_PINCTRL_GROUP(SALT10),
+ ASPEED_PINCTRL_GROUP(SALT11),
+ ASPEED_PINCTRL_GROUP(SALT12),
+ ASPEED_PINCTRL_GROUP(SALT13),
+ ASPEED_PINCTRL_GROUP(SALT14),
+ ASPEED_PINCTRL_GROUP(SALT2),
+ ASPEED_PINCTRL_GROUP(SALT3),
+ ASPEED_PINCTRL_GROUP(SALT4),
+ ASPEED_PINCTRL_GROUP(SALT5),
+ ASPEED_PINCTRL_GROUP(SALT6),
+ ASPEED_PINCTRL_GROUP(SALT7),
+ ASPEED_PINCTRL_GROUP(SALT8),
+ ASPEED_PINCTRL_GROUP(SALT9),
+ ASPEED_PINCTRL_GROUP(SCL1),
+ ASPEED_PINCTRL_GROUP(SCL2),
ASPEED_PINCTRL_GROUP(SD1),
+ ASPEED_PINCTRL_GROUP(SD2),
+ ASPEED_PINCTRL_GROUP(SDA1),
+ ASPEED_PINCTRL_GROUP(SDA2),
+ ASPEED_PINCTRL_GROUP(SGPS1),
+ ASPEED_PINCTRL_GROUP(SGPS2),
+ ASPEED_PINCTRL_GROUP(SIOONCTRL),
+ ASPEED_PINCTRL_GROUP(SIOPBI),
+ ASPEED_PINCTRL_GROUP(SIOPBO),
+ ASPEED_PINCTRL_GROUP(SIOPWREQ),
+ ASPEED_PINCTRL_GROUP(SIOPWRGD),
+ ASPEED_PINCTRL_GROUP(SIOS3),
+ ASPEED_PINCTRL_GROUP(SIOS5),
+ ASPEED_PINCTRL_GROUP(SIOSCI),
ASPEED_PINCTRL_GROUP(SPI1),
+ ASPEED_PINCTRL_GROUP(SPI1CS1),
ASPEED_PINCTRL_GROUP(SPI1DEBUG),
ASPEED_PINCTRL_GROUP(SPI1PASSTHRU),
+ ASPEED_PINCTRL_GROUP(SPI2CK),
+ ASPEED_PINCTRL_GROUP(SPI2CS0),
+ ASPEED_PINCTRL_GROUP(SPI2CS1),
+ ASPEED_PINCTRL_GROUP(SPI2MISO),
+ ASPEED_PINCTRL_GROUP(SPI2MOSI),
+ ASPEED_PINCTRL_GROUP(TIMER3),
ASPEED_PINCTRL_GROUP(TIMER4),
ASPEED_PINCTRL_GROUP(TIMER5),
ASPEED_PINCTRL_GROUP(TIMER6),
ASPEED_PINCTRL_GROUP(TIMER7),
ASPEED_PINCTRL_GROUP(TIMER8),
+ ASPEED_PINCTRL_GROUP(TXD1),
+ ASPEED_PINCTRL_GROUP(TXD2),
+ ASPEED_PINCTRL_GROUP(TXD3),
+ ASPEED_PINCTRL_GROUP(TXD4),
+ ASPEED_PINCTRL_GROUP(UART6),
+ ASPEED_PINCTRL_GROUP(USBCKI),
ASPEED_PINCTRL_GROUP(VGABIOSROM),
+ ASPEED_PINCTRL_GROUP(VGAHS),
+ ASPEED_PINCTRL_GROUP(VGAVS),
+ ASPEED_PINCTRL_GROUP(VPI24),
+ ASPEED_PINCTRL_GROUP(VPO),
+ ASPEED_PINCTRL_GROUP(WDTRST1),
+ ASPEED_PINCTRL_GROUP(WDTRST2),
};
static const struct aspeed_pin_function aspeed_g5_functions[] = {
+ ASPEED_PINCTRL_FUNC(ACPI),
+ ASPEED_PINCTRL_FUNC(ADC0),
+ ASPEED_PINCTRL_FUNC(ADC1),
+ ASPEED_PINCTRL_FUNC(ADC10),
+ ASPEED_PINCTRL_FUNC(ADC11),
+ ASPEED_PINCTRL_FUNC(ADC12),
+ ASPEED_PINCTRL_FUNC(ADC13),
+ ASPEED_PINCTRL_FUNC(ADC14),
+ ASPEED_PINCTRL_FUNC(ADC15),
+ ASPEED_PINCTRL_FUNC(ADC2),
+ ASPEED_PINCTRL_FUNC(ADC3),
+ ASPEED_PINCTRL_FUNC(ADC4),
+ ASPEED_PINCTRL_FUNC(ADC5),
+ ASPEED_PINCTRL_FUNC(ADC6),
+ ASPEED_PINCTRL_FUNC(ADC7),
+ ASPEED_PINCTRL_FUNC(ADC8),
+ ASPEED_PINCTRL_FUNC(ADC9),
+ ASPEED_PINCTRL_FUNC(BMCINT),
+ ASPEED_PINCTRL_FUNC(DDCCLK),
+ ASPEED_PINCTRL_FUNC(DDCDAT),
+ ASPEED_PINCTRL_FUNC(ESPI),
+ ASPEED_PINCTRL_FUNC(FWSPICS1),
+ ASPEED_PINCTRL_FUNC(FWSPICS2),
ASPEED_PINCTRL_FUNC(GPID0),
ASPEED_PINCTRL_FUNC(GPID2),
+ ASPEED_PINCTRL_FUNC(GPID4),
+ ASPEED_PINCTRL_FUNC(GPID6),
ASPEED_PINCTRL_FUNC(GPIE0),
+ ASPEED_PINCTRL_FUNC(GPIE2),
+ ASPEED_PINCTRL_FUNC(GPIE4),
+ ASPEED_PINCTRL_FUNC(GPIE6),
ASPEED_PINCTRL_FUNC(I2C10),
ASPEED_PINCTRL_FUNC(I2C11),
ASPEED_PINCTRL_FUNC(I2C12),
@@ -781,11 +2160,50 @@ static const struct aspeed_pin_function aspeed_g5_functions[] = {
ASPEED_PINCTRL_FUNC(I2C7),
ASPEED_PINCTRL_FUNC(I2C8),
ASPEED_PINCTRL_FUNC(I2C9),
+ ASPEED_PINCTRL_FUNC(LAD0),
+ ASPEED_PINCTRL_FUNC(LAD1),
+ ASPEED_PINCTRL_FUNC(LAD2),
+ ASPEED_PINCTRL_FUNC(LAD3),
+ ASPEED_PINCTRL_FUNC(LCLK),
+ ASPEED_PINCTRL_FUNC(LFRAME),
+ ASPEED_PINCTRL_FUNC(LPCHC),
+ ASPEED_PINCTRL_FUNC(LPCPD),
+ ASPEED_PINCTRL_FUNC(LPCPLUS),
+ ASPEED_PINCTRL_FUNC(LPCPME),
+ ASPEED_PINCTRL_FUNC(LPCRST),
+ ASPEED_PINCTRL_FUNC(LPCSMI),
+ ASPEED_PINCTRL_FUNC(LSIRQ),
ASPEED_PINCTRL_FUNC(MAC1LINK),
+ ASPEED_PINCTRL_FUNC(MAC2LINK),
ASPEED_PINCTRL_FUNC(MDIO1),
ASPEED_PINCTRL_FUNC(MDIO2),
+ ASPEED_PINCTRL_FUNC(NCTS1),
+ ASPEED_PINCTRL_FUNC(NCTS2),
+ ASPEED_PINCTRL_FUNC(NCTS3),
+ ASPEED_PINCTRL_FUNC(NCTS4),
+ ASPEED_PINCTRL_FUNC(NDCD1),
+ ASPEED_PINCTRL_FUNC(NDCD2),
+ ASPEED_PINCTRL_FUNC(NDCD3),
+ ASPEED_PINCTRL_FUNC(NDCD4),
+ ASPEED_PINCTRL_FUNC(NDSR1),
+ ASPEED_PINCTRL_FUNC(NDSR2),
+ ASPEED_PINCTRL_FUNC(NDSR3),
+ ASPEED_PINCTRL_FUNC(NDSR4),
+ ASPEED_PINCTRL_FUNC(NDTR1),
+ ASPEED_PINCTRL_FUNC(NDTR2),
+ ASPEED_PINCTRL_FUNC(NDTR3),
+ ASPEED_PINCTRL_FUNC(NDTR4),
+ ASPEED_PINCTRL_FUNC(NRI1),
+ ASPEED_PINCTRL_FUNC(NRI2),
+ ASPEED_PINCTRL_FUNC(NRI3),
+ ASPEED_PINCTRL_FUNC(NRI4),
+ ASPEED_PINCTRL_FUNC(NRTS1),
+ ASPEED_PINCTRL_FUNC(NRTS2),
+ ASPEED_PINCTRL_FUNC(NRTS3),
+ ASPEED_PINCTRL_FUNC(NRTS4),
ASPEED_PINCTRL_FUNC(OSCCLK),
ASPEED_PINCTRL_FUNC(PEWAKE),
+ ASPEED_PINCTRL_FUNC(PNOR),
ASPEED_PINCTRL_FUNC(PWM0),
ASPEED_PINCTRL_FUNC(PWM1),
ASPEED_PINCTRL_FUNC(PWM2),
@@ -798,16 +2216,68 @@ static const struct aspeed_pin_function aspeed_g5_functions[] = {
ASPEED_PINCTRL_FUNC(RGMII2),
ASPEED_PINCTRL_FUNC(RMII1),
ASPEED_PINCTRL_FUNC(RMII2),
+ ASPEED_PINCTRL_FUNC(RXD1),
+ ASPEED_PINCTRL_FUNC(RXD2),
+ ASPEED_PINCTRL_FUNC(RXD3),
+ ASPEED_PINCTRL_FUNC(RXD4),
+ ASPEED_PINCTRL_FUNC(SALT1),
+ ASPEED_PINCTRL_FUNC(SALT10),
+ ASPEED_PINCTRL_FUNC(SALT11),
+ ASPEED_PINCTRL_FUNC(SALT12),
+ ASPEED_PINCTRL_FUNC(SALT13),
+ ASPEED_PINCTRL_FUNC(SALT14),
+ ASPEED_PINCTRL_FUNC(SALT2),
+ ASPEED_PINCTRL_FUNC(SALT3),
+ ASPEED_PINCTRL_FUNC(SALT4),
+ ASPEED_PINCTRL_FUNC(SALT5),
+ ASPEED_PINCTRL_FUNC(SALT6),
+ ASPEED_PINCTRL_FUNC(SALT7),
+ ASPEED_PINCTRL_FUNC(SALT8),
+ ASPEED_PINCTRL_FUNC(SALT9),
+ ASPEED_PINCTRL_FUNC(SCL1),
+ ASPEED_PINCTRL_FUNC(SCL2),
ASPEED_PINCTRL_FUNC(SD1),
+ ASPEED_PINCTRL_FUNC(SD2),
+ ASPEED_PINCTRL_FUNC(SDA1),
+ ASPEED_PINCTRL_FUNC(SDA2),
+ ASPEED_PINCTRL_FUNC(SGPS1),
+ ASPEED_PINCTRL_FUNC(SGPS2),
+ ASPEED_PINCTRL_FUNC(SIOONCTRL),
+ ASPEED_PINCTRL_FUNC(SIOPBI),
+ ASPEED_PINCTRL_FUNC(SIOPBO),
+ ASPEED_PINCTRL_FUNC(SIOPWREQ),
+ ASPEED_PINCTRL_FUNC(SIOPWRGD),
+ ASPEED_PINCTRL_FUNC(SIOS3),
+ ASPEED_PINCTRL_FUNC(SIOS5),
+ ASPEED_PINCTRL_FUNC(SIOSCI),
ASPEED_PINCTRL_FUNC(SPI1),
+ ASPEED_PINCTRL_FUNC(SPI1CS1),
ASPEED_PINCTRL_FUNC(SPI1DEBUG),
ASPEED_PINCTRL_FUNC(SPI1PASSTHRU),
+ ASPEED_PINCTRL_FUNC(SPI2CK),
+ ASPEED_PINCTRL_FUNC(SPI2CS0),
+ ASPEED_PINCTRL_FUNC(SPI2CS1),
+ ASPEED_PINCTRL_FUNC(SPI2MISO),
+ ASPEED_PINCTRL_FUNC(SPI2MOSI),
+ ASPEED_PINCTRL_FUNC(TIMER3),
ASPEED_PINCTRL_FUNC(TIMER4),
ASPEED_PINCTRL_FUNC(TIMER5),
ASPEED_PINCTRL_FUNC(TIMER6),
ASPEED_PINCTRL_FUNC(TIMER7),
ASPEED_PINCTRL_FUNC(TIMER8),
+ ASPEED_PINCTRL_FUNC(TXD1),
+ ASPEED_PINCTRL_FUNC(TXD2),
+ ASPEED_PINCTRL_FUNC(TXD3),
+ ASPEED_PINCTRL_FUNC(TXD4),
+ ASPEED_PINCTRL_FUNC(UART6),
+ ASPEED_PINCTRL_FUNC(USBCKI),
ASPEED_PINCTRL_FUNC(VGABIOSROM),
+ ASPEED_PINCTRL_FUNC(VGAHS),
+ ASPEED_PINCTRL_FUNC(VGAVS),
+ ASPEED_PINCTRL_FUNC(VPI24),
+ ASPEED_PINCTRL_FUNC(VPO),
+ ASPEED_PINCTRL_FUNC(WDTRST1),
+ ASPEED_PINCTRL_FUNC(WDTRST2),
};
static struct aspeed_pinctrl_data aspeed_g5_pinctrl_data = {
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
index 3a76d2c95584..68315a82e9b9 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
@@ -264,6 +264,7 @@
#define SCUA0 0xA0 /* Multi-function Pin Control #7 */
#define SCUA4 0xA4 /* Multi-function Pin Control #8 */
#define SCUA8 0xA8 /* Multi-function Pin Control #9 */
+#define SCUAC 0xAC /* Multi-function Pin Control #10 */
#define HW_STRAP2 0xD0 /* Strapping */
#define SIORD30 SIG_DESC_TO_REG(ASPEED_IP_SIO, 0x30)
--
git-series 0.8.10
^ permalink raw reply related
* [PATCH 7/8] pinctrl: aspeed-g4: Add mux configuration for all pins
From: Andrew Jeffery @ 2016-09-27 14:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.115463f791b69859c5ce9dafd61a5755ea039f4b.1474986045.git-series.andrew@aj.id.au>
The patch introducing the g4 pinctrl driver implemented a smattering of
pins to flesh out the implementation of the core and provide bare-bones
support for some OpenPOWER platforms. Now, update the bindings document
to reflect the complete functionality and implement the necessary pin
configuration tables in the driver.
Cc: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 19 +-
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 1094 ++++++-
2 files changed, 1093 insertions(+), 20 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index 2ad18c4ea55c..0defef01ff83 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -31,13 +31,18 @@ supported:
aspeed,ast2400-pinctrl, aspeed,g4-pinctrl:
-ACPI BMCINT DDCCLK DDCDAT FLACK FLBUSY FLWP GPID0 GPIE0 GPIE2 GPIE4 GPIE6 I2C10
-I2C11 I2C12 I2C13 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCSMI MDIO1
-MDIO2 NCTS1 NCTS3 NCTS4 NDCD1 NDCD3 NDCD4 NDSR1 NDSR3 NDTR1 NDTR3 NRI1 NRI3
-NRI4 NRTS1 NRTS3 PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RMII1 ROM16
-ROM8 ROMCS1 ROMCS2 ROMCS3 ROMCS4 RXD1 RXD3 RXD4 SD1 SGPMI SIOPBI SIOPBO TIMER3
-TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD3 TXD4 UART6 VGAHS VGAVS VPI18 VPI24 VPI30
-VPO12 VPO24
+ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
+ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT EXTRST FLACK FLBUSY FLWP GPID GPID0 GPID2
+GPID4 GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4
+I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCRST LPCSMI MAC1LINK MAC2LINK MDIO1
+MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4
+NDTR1 NDTR2 NDTR3 NDTR4 NDTS4 NRI1 NRI2 NRI3 NRI4 NRTS1 NRTS2 NRTS3 OSCCLK PWM0
+PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1
+ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK
+SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ
+SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4
+TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USBCKI VGABIOS_ROM VGAHS
+VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 WDTRST2
aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
index ceb13d4955cb..921c57d445b7 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
@@ -43,9 +43,18 @@
* Not all pins have their signals defined (yet).
*/
+#define D6 0
+SSSF_PIN_DECL(D6, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
+
+#define B5 1
+SSSF_PIN_DECL(B5, GPIOA1, MAC2LINK, SIG_DESC_SET(SCU80, 1));
+
#define A4 2
SSSF_PIN_DECL(A4, GPIOA2, TIMER3, SIG_DESC_SET(SCU80, 2));
+#define E6 3
+SSSF_PIN_DECL(E6, GPIOA3, TIMER4, SIG_DESC_SET(SCU80, 3));
+
#define I2C9_DESC SIG_DESC_SET(SCU90, 22)
#define C5 4
@@ -80,6 +89,26 @@ MS_PIN_DECL(D5, GPIOA7, MDIO2, TIMER8);
FUNC_GROUP_DECL(TIMER8, D5);
FUNC_GROUP_DECL(MDIO2, A3, D5);
+#define J21 8
+SSSF_PIN_DECL(J21, GPIOB0, SALT1, SIG_DESC_SET(SCU80, 8));
+
+#define J20 9
+SSSF_PIN_DECL(J20, GPIOB1, SALT2, SIG_DESC_SET(SCU80, 9));
+
+#define H18 10
+SSSF_PIN_DECL(H18, GPIOB2, SALT3, SIG_DESC_SET(SCU80, 10));
+
+#define F18 11
+SSSF_PIN_DECL(F18, GPIOB3, SALT4, SIG_DESC_SET(SCU80, 11));
+
+#define E19 12
+SIG_EXPR_DECL(LPCRST, LPCRST, SIG_DESC_SET(SCU80, 12));
+SIG_EXPR_DECL(LPCRST, LPCRSTS, SIG_DESC_SET(HW_STRAP1, 14));
+SIG_EXPR_LIST_DECL_DUAL(LPCRST, LPCRST, LPCRSTS);
+SS_PIN_DECL(E19, GPIOB4, LPCRST);
+
+FUNC_GROUP_DECL(LPCRST, E19);
+
#define H19 13
#define H19_DESC SIG_DESC_SET(SCU80, 13)
SIG_EXPR_LIST_DECL_SINGLE(LPCPD, LPCPD, H19_DESC, SIG_DESC_BIT(SIORD30, 1, 0));
@@ -92,6 +121,19 @@ FUNC_GROUP_DECL(LPCSMI, H19);
#define H20 14
SSSF_PIN_DECL(H20, GPIOB6, LPCPME, SIG_DESC_SET(SCU80, 14));
+#define E18 15
+SIG_EXPR_LIST_DECL_SINGLE(EXTRST, EXTRST,
+ SIG_DESC_SET(SCU80, 15),
+ SIG_DESC_BIT(SCU90, 31, 0),
+ SIG_DESC_SET(SCU3C, 3));
+SIG_EXPR_LIST_DECL_SINGLE(SPICS1, SPICS1,
+ SIG_DESC_SET(SCU80, 15),
+ SIG_DESC_SET(SCU90, 31));
+MS_PIN_DECL(E18, GPIOB7, EXTRST, SPICS1);
+
+FUNC_GROUP_DECL(EXTRST, E18);
+FUNC_GROUP_DECL(SPICS1, E18);
+
#define SD1_DESC SIG_DESC_SET(SCU90, 0)
#define I2C10_DESC SIG_DESC_SET(SCU90, 23)
@@ -170,6 +212,62 @@ MS_PIN_DECL(D16, GPIOD1, SD2CMD, GPID0OUT);
FUNC_GROUP_DECL(GPID0, A18, D16);
+#define GPID2_DESC SIG_DESC_SET(SCU8C, 9)
+
+#define B17 26
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT0, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID2IN, GPID2, GPID2_DESC);
+SIG_EXPR_DECL(GPID2IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID2IN, GPID2, GPID);
+MS_PIN_DECL(B17, GPIOD2, SD2DAT0, GPID2IN);
+
+#define A17 27
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT1, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID2OUT, GPID2, GPID2_DESC);
+SIG_EXPR_DECL(GPID2OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID2OUT, GPID2, GPID);
+MS_PIN_DECL(A17, GPIOD3, SD2DAT1, GPID2OUT);
+
+FUNC_GROUP_DECL(GPID2, B17, A17);
+
+#define GPID4_DESC SIG_DESC_SET(SCU8C, 10)
+
+#define C16 28
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT2, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4IN, GPID4, GPID);
+MS_PIN_DECL(C16, GPIOD4, SD2DAT2, GPID4IN);
+
+#define B16 29
+SIG_EXPR_LIST_DECL_SINGLE(SD2DAT3, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID4, GPID4_DESC);
+SIG_EXPR_DECL(GPID4OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID4OUT, GPID4, GPID);
+MS_PIN_DECL(B16, GPIOD5, SD2DAT3, GPID4OUT);
+
+FUNC_GROUP_DECL(GPID4, C16, B16);
+
+#define GPID6_DESC SIG_DESC_SET(SCU8C, 11)
+
+#define A16 30
+SIG_EXPR_LIST_DECL_SINGLE(SD2CD, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6IN, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6IN, GPID6, GPID);
+MS_PIN_DECL(A16, GPIOD6, SD2CD, GPID6IN);
+
+#define E15 31
+SIG_EXPR_LIST_DECL_SINGLE(SD2WP, SD2, SD2_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID6, GPID6_DESC);
+SIG_EXPR_DECL(GPID6OUT, GPID, GPID_DESC);
+SIG_EXPR_LIST_DECL_DUAL(GPID6OUT, GPID6, GPID);
+MS_PIN_DECL(E15, GPIOD7, SD2WP, GPID6OUT);
+
+FUNC_GROUP_DECL(GPID6, A16, E15);
+FUNC_GROUP_DECL(SD2, A18, D16, B17, A17, C16, B16, A16, E15);
+FUNC_GROUP_DECL(GPID, A18, D16, B17, A17, C16, B16, A16, E15);
+
#define GPIE_DESC SIG_DESC_SET(HW_STRAP1, 22)
#define GPIE0_DESC SIG_DESC_SET(SCU8C, 12)
#define GPIE2_DESC SIG_DESC_SET(SCU8C, 13)
@@ -266,6 +364,15 @@ MS_PIN_DECL(B19, GPIOF1, NDCD4, SIOPBI);
FUNC_GROUP_DECL(NDCD4, B19);
FUNC_GROUP_DECL(SIOPBI, B19);
+#define A20 42
+SIG_EXPR_LIST_DECL_SINGLE(NDSR4, NDSR4, SIG_DESC_SET(SCU80, 26));
+SIG_EXPR_DECL(SIOPWRGD, SIOPWRGD, SIG_DESC_SET(SCUA4, 12));
+SIG_EXPR_DECL(SIOPWRGD, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWRGD, SIOPWRGD, ACPI);
+MS_PIN_DECL(A20, GPIOF2, NDSR4, SIOPWRGD);
+FUNC_GROUP_DECL(NDSR4, A20);
+FUNC_GROUP_DECL(SIOPWRGD, A20);
+
#define D17 43
SIG_EXPR_LIST_DECL_SINGLE(NRI4, NRI4, SIG_DESC_SET(SCU80, 27));
SIG_EXPR_DECL(SIOPBO, SIOPBO, SIG_DESC_SET(SCUA4, 14));
@@ -275,7 +382,17 @@ MS_PIN_DECL(D17, GPIOF3, NRI4, SIOPBO);
FUNC_GROUP_DECL(NRI4, D17);
FUNC_GROUP_DECL(SIOPBO, D17);
-FUNC_GROUP_DECL(ACPI, B19, D17);
+#define B18 44
+SSSF_PIN_DECL(B18, GPIOF4, NDTR4, SIG_DESC_SET(SCU80, 28));
+
+#define A19 45
+SIG_EXPR_LIST_DECL_SINGLE(NDTS4, NDTS4, SIG_DESC_SET(SCU80, 29));
+SIG_EXPR_DECL(SIOSCI, SIOSCI, SIG_DESC_SET(SCUA4, 15));
+SIG_EXPR_DECL(SIOSCI, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOSCI, SIOSCI, ACPI);
+MS_PIN_DECL(A19, GPIOF5, NDTS4, SIOSCI);
+FUNC_GROUP_DECL(NDTS4, A19);
+FUNC_GROUP_DECL(SIOSCI, A19);
#define E16 46
SSSF_PIN_DECL(E16, GPIOF6, TXD4, SIG_DESC_SET(SCU80, 30));
@@ -283,6 +400,34 @@ SSSF_PIN_DECL(E16, GPIOF6, TXD4, SIG_DESC_SET(SCU80, 30));
#define C17 47
SSSF_PIN_DECL(C17, GPIOF7, RXD4, SIG_DESC_SET(SCU80, 31));
+#define A14 48
+SSSF_PIN_DECL(A14, GPIOG0, SGPSCK, SIG_DESC_SET(SCU84, 0));
+
+#define E13 49
+SSSF_PIN_DECL(E13, GPIOG1, SGPSLD, SIG_DESC_SET(SCU84, 1));
+
+#define D13 50
+SSSF_PIN_DECL(D13, GPIOG2, SGPSI0, SIG_DESC_SET(SCU84, 2));
+
+#define C13 51
+SSSF_PIN_DECL(C13, GPIOG3, SGPSI1, SIG_DESC_SET(SCU84, 3));
+
+#define B13 52
+SIG_EXPR_LIST_DECL_SINGLE(OSCCLK, OSCCLK, SIG_DESC_SET(SCU2C, 1));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST1, WDTRST1, SIG_DESC_SET(SCU84, 4));
+MS_PIN_DECL(B13, GPIOG4, OSCCLK, WDTRST1);
+
+FUNC_GROUP_DECL(OSCCLK, B13);
+FUNC_GROUP_DECL(WDTRST1, B13);
+
+#define Y21 53
+SIG_EXPR_LIST_DECL_SINGLE(USBCKI, USBCKI, SIG_DESC_SET(HW_STRAP1, 23));
+SIG_EXPR_LIST_DECL_SINGLE(WDTRST2, WDTRST2, SIG_DESC_SET(SCU84, 5));
+MS_PIN_DECL(Y21, GPIOG5, USBCKI, WDTRST2);
+
+FUNC_GROUP_DECL(USBCKI, Y21);
+FUNC_GROUP_DECL(WDTRST2, Y21);
+
#define AA22 54
SSSF_PIN_DECL(AA22, GPIOG6, FLBUSY, SIG_DESC_SET(SCU84, 6));
@@ -352,6 +497,90 @@ MS_PIN_DECL(E7, GPIOH7, ROMD15, RXD6);
FUNC_GROUP_DECL(UART6, A8, C7, B7, A7, D7, B6, A6, E7);
+#define SPI1_DESC { HW_STRAP1, GENMASK(13, 12), 1, 0 }
+#define SPI1DEBUG_DESC { HW_STRAP1, GENMASK(13, 12), 2, 0 }
+#define SPI1PASSTHRU_DESC { HW_STRAP1, GENMASK(13, 12), 3, 0 }
+
+#define C22 64
+SIG_EXPR_DECL(SYSCS, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSCS, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSCS, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(C22, GPIOI0, SYSCS);
+
+#define G18 65
+SIG_EXPR_DECL(SYSCK, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSCK, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSCK, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(G18, GPIOI1, SYSCK);
+
+#define D19 66
+SIG_EXPR_DECL(SYSDO, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSDO, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSDO, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(D19, GPIOI2, SYSDO);
+
+#define C20 67
+SIG_EXPR_DECL(SYSDI, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SYSDI, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SYSDI, SPI1DEBUG, SPI1PASSTHRU);
+SS_PIN_DECL(C20, GPIOI3, SYSDI);
+
+#define VB_DESC SIG_DESC_SET(HW_STRAP1, 5)
+
+#define B22 68
+SIG_EXPR_DECL(SPI1CS0, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1CS0, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1CS0, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1CS0, SIG_EXPR_PTR(SPI1CS0, SPI1),
+ SIG_EXPR_PTR(SPI1CS0, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1CS0, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBCS, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(B22, GPIOI4, SPI1CS0, VBCS);
+
+#define G19 69
+SIG_EXPR_DECL(SPI1CK, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1CK, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1CK, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1CK, SIG_EXPR_PTR(SPI1CK, SPI1),
+ SIG_EXPR_PTR(SPI1CK, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1CK, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBCK, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(G19, GPIOI5, SPI1CK, VBCK);
+
+#define C18 70
+SIG_EXPR_DECL(SPI1DO, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1DO, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1DO, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1DO, SIG_EXPR_PTR(SPI1DO, SPI1),
+ SIG_EXPR_PTR(SPI1DO, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1DO, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBDO, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(C18, GPIOI6, SPI1DO, VBDO);
+
+#define E20 71
+SIG_EXPR_DECL(SPI1DI, SPI1, SPI1_DESC);
+SIG_EXPR_DECL(SPI1DI, SPI1DEBUG, SPI1DEBUG_DESC);
+SIG_EXPR_DECL(SPI1DI, SPI1PASSTHRU, SPI1PASSTHRU_DESC);
+SIG_EXPR_LIST_DECL(SPI1DI, SIG_EXPR_PTR(SPI1DI, SPI1),
+ SIG_EXPR_PTR(SPI1DI, SPI1DEBUG),
+ SIG_EXPR_PTR(SPI1DI, SPI1PASSTHRU));
+SIG_EXPR_LIST_DECL_SINGLE(VBDI, VGABIOS_ROM, VB_DESC);
+MS_PIN_DECL(E20, GPIOI7, SPI1DI, VBDI);
+
+FUNC_GROUP_DECL(SPI1, B22, G19, C18, E20);
+FUNC_GROUP_DECL(SPI1DEBUG, C22, G18, D19, C20, B22, G19, C18, E20);
+FUNC_GROUP_DECL(SPI1PASSTHRU, C22, G18, D19, C20, B22, G19, C18, E20);
+FUNC_GROUP_DECL(VGABIOS_ROM, B22, G19, C18, E20);
+
+#define J5 72
+SSSF_PIN_DECL(J5, GPIOJ0, SGPMCK, SIG_DESC_SET(SCU84, 8));
+
+#define J4 73
+SSSF_PIN_DECL(J4, GPIOJ1, SGPMLD, SIG_DESC_SET(SCU84, 9));
+
+#define K5 74
+SSSF_PIN_DECL(K5, GPIOJ2, SGPMO, SIG_DESC_SET(SCU84, 10));
+
#define J3 75
SSSF_PIN_DECL(J3, GPIOJ3, SGPMI, SIG_DESC_SET(SCU84, 11));
@@ -496,6 +725,102 @@ SIG_EXPR_LIST_DECL_SINGLE(RXD1, RXD1, U5_DESC);
MS_PIN_DECL(U5, GPIOL7, VPIB1, RXD1);
FUNC_GROUP_DECL(RXD1, U5);
+#define V3 96
+#define V3_DESC SIG_DESC_SET(SCU84, 24)
+SIG_EXPR_DECL(VPIOB2, VPI18, VPI18_DESC, V3_DESC);
+SIG_EXPR_DECL(VPIOB2, VPI24, VPI24_DESC, V3_DESC);
+SIG_EXPR_DECL(VPIOB2, VPI30, VPI30_DESC, V3_DESC);
+SIG_EXPR_LIST_DECL(VPIOB2, SIG_EXPR_PTR(VPIOB2, VPI18),
+ SIG_EXPR_PTR(VPIOB2, VPI24),
+ SIG_EXPR_PTR(VPIOB2, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NCTS2, NCTS2, V3_DESC);
+MS_PIN_DECL(V3, GPIOM0, VPIOB2, NCTS2);
+FUNC_GROUP_DECL(NCTS2, V3);
+
+#define W2 97
+#define W2_DESC SIG_DESC_SET(SCU84, 25)
+SIG_EXPR_DECL(VPIOB3, VPI18, VPI18_DESC, W2_DESC);
+SIG_EXPR_DECL(VPIOB3, VPI24, VPI24_DESC, W2_DESC);
+SIG_EXPR_DECL(VPIOB3, VPI30, VPI30_DESC, W2_DESC);
+SIG_EXPR_LIST_DECL(VPIOB3, SIG_EXPR_PTR(VPIOB3, VPI18),
+ SIG_EXPR_PTR(VPIOB3, VPI24),
+ SIG_EXPR_PTR(VPIOB3, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDCD2, NDCD2, W2_DESC);
+MS_PIN_DECL(W2, GPIOM1, VPIOB3, NDCD2);
+FUNC_GROUP_DECL(NDCD2, W2);
+
+#define Y1 98
+#define Y1_DESC SIG_DESC_SET(SCU84, 26)
+SIG_EXPR_DECL(VPIOB4, VPI18, VPI18_DESC, Y1_DESC);
+SIG_EXPR_DECL(VPIOB4, VPI24, VPI24_DESC, Y1_DESC);
+SIG_EXPR_DECL(VPIOB4, VPI30, VPI30_DESC, Y1_DESC);
+SIG_EXPR_LIST_DECL(VPIOB4, SIG_EXPR_PTR(VPIOB4, VPI18),
+ SIG_EXPR_PTR(VPIOB4, VPI24),
+ SIG_EXPR_PTR(VPIOB4, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDSR2, NDSR2, Y1_DESC);
+MS_PIN_DECL(Y1, GPIOM2, VPIOB4, NDSR2);
+FUNC_GROUP_DECL(NDSR2, Y1);
+
+#define V4 99
+#define V4_DESC SIG_DESC_SET(SCU84, 27)
+SIG_EXPR_DECL(VPIOB5, VPI18, VPI18_DESC, V4_DESC);
+SIG_EXPR_DECL(VPIOB5, VPI24, VPI24_DESC, V4_DESC);
+SIG_EXPR_DECL(VPIOB5, VPI30, VPI30_DESC, V4_DESC);
+SIG_EXPR_LIST_DECL(VPIOB5, SIG_EXPR_PTR(VPIOB5, VPI18),
+ SIG_EXPR_PTR(VPIOB5, VPI24),
+ SIG_EXPR_PTR(VPIOB5, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NRI2, NRI2, V4_DESC);
+MS_PIN_DECL(V4, GPIOM3, VPIOB5, NRI2);
+FUNC_GROUP_DECL(NRI2, V4);
+
+#define W3 100
+#define W3_DESC SIG_DESC_SET(SCU84, 28)
+SIG_EXPR_DECL(VPIOB6, VPI18, VPI18_DESC, W3_DESC);
+SIG_EXPR_DECL(VPIOB6, VPI24, VPI24_DESC, W3_DESC);
+SIG_EXPR_DECL(VPIOB6, VPI30, VPI30_DESC, W3_DESC);
+SIG_EXPR_LIST_DECL(VPIOB6, SIG_EXPR_PTR(VPIOB6, VPI18),
+ SIG_EXPR_PTR(VPIOB6, VPI24),
+ SIG_EXPR_PTR(VPIOB6, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NDTR2, NDTR2, W3_DESC);
+MS_PIN_DECL(W3, GPIOM4, VPIOB6, NDTR2);
+FUNC_GROUP_DECL(NDTR2, W3);
+
+#define Y2 101
+#define Y2_DESC SIG_DESC_SET(SCU84, 29)
+SIG_EXPR_DECL(VPIOB7, VPI18, VPI18_DESC, Y2_DESC);
+SIG_EXPR_DECL(VPIOB7, VPI24, VPI24_DESC, Y2_DESC);
+SIG_EXPR_DECL(VPIOB7, VPI30, VPI30_DESC, Y2_DESC);
+SIG_EXPR_LIST_DECL(VPIOB7, SIG_EXPR_PTR(VPIOB7, VPI18),
+ SIG_EXPR_PTR(VPIOB7, VPI24),
+ SIG_EXPR_PTR(VPIOB7, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(NRTS2, NRTS2, Y2_DESC);
+MS_PIN_DECL(Y2, GPIOM5, VPIOB7, NRTS2);
+FUNC_GROUP_DECL(NRTS2, Y2);
+
+#define AA1 102
+#define AA1_DESC SIG_DESC_SET(SCU84, 30)
+SIG_EXPR_DECL(VPIOB8, VPI18, VPI18_DESC, AA1_DESC);
+SIG_EXPR_DECL(VPIOB8, VPI24, VPI24_DESC, AA1_DESC);
+SIG_EXPR_DECL(VPIOB8, VPI30, VPI30_DESC, AA1_DESC);
+SIG_EXPR_LIST_DECL(VPIOB8, SIG_EXPR_PTR(VPIOB8, VPI18),
+ SIG_EXPR_PTR(VPIOB8, VPI24),
+ SIG_EXPR_PTR(VPIOB8, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(TXD2, TXD2, AA1_DESC);
+MS_PIN_DECL(AA1, GPIOM6, VPIOB8, TXD2);
+FUNC_GROUP_DECL(TXD2, AA1);
+
+#define V5 103
+#define V5_DESC SIG_DESC_SET(SCU84, 31)
+SIG_EXPR_DECL(VPIOB9, VPI18, VPI18_DESC, V5_DESC);
+SIG_EXPR_DECL(VPIOB9, VPI24, VPI24_DESC, V5_DESC);
+SIG_EXPR_DECL(VPIOB9, VPI30, VPI30_DESC, V5_DESC);
+SIG_EXPR_LIST_DECL(VPIOB9, SIG_EXPR_PTR(VPIOB9, VPI18),
+ SIG_EXPR_PTR(VPIOB9, VPI24),
+ SIG_EXPR_PTR(VPIOB9, VPI30));
+SIG_EXPR_LIST_DECL_SINGLE(RXD2, RXD2, V5_DESC);
+MS_PIN_DECL(V5, GPIOM7, VPIOB9, RXD2);
+FUNC_GROUP_DECL(RXD2, V5);
+
#define W4 104
#define W4_DESC SIG_DESC_SET(SCU88, 0)
SIG_EXPR_LIST_DECL_SINGLE(VPIG0, VPI30, VPI30_DESC, W4_DESC);
@@ -580,10 +905,57 @@ SS_PIN_DECL(V6, GPIOO0, VPIG8);
SIG_EXPR_LIST_DECL_SINGLE(VPIG9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 9));
SS_PIN_DECL(Y5, GPIOO1, VPIG9);
-FUNC_GROUP_DECL(VPI18, T5, U3, V1, U4, V2, AA22, W5, Y4, AA3, AB2);
-FUNC_GROUP_DECL(VPI24, T5, U3, V1, U4, V2, AA22, W5, Y4, AA3, AB2, V6, Y5);
-FUNC_GROUP_DECL(VPI30, T5, U3, V1, U4, V2, W1, U5, W4, Y3, AA22, W5, Y4, AA3,
- AB2);
+#define AA4 114
+SIG_EXPR_LIST_DECL_SINGLE(VPIR0, VPI30, VPI30_DESC, SIG_DESC_SET(SCU88, 10));
+SS_PIN_DECL(AA4, GPIOO2, VPIR0);
+
+#define AB3 115
+SIG_EXPR_LIST_DECL_SINGLE(VPIR1, VPI30, VPI30_DESC, SIG_DESC_SET(SCU88, 11));
+SS_PIN_DECL(AB3, GPIOO3, VPIR1);
+
+#define W6 116
+SIG_EXPR_LIST_DECL_SINGLE(VPIR2, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 12));
+SS_PIN_DECL(W6, GPIOO4, VPIR2);
+
+#define AA5 117
+SIG_EXPR_LIST_DECL_SINGLE(VPIR3, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 13));
+SS_PIN_DECL(AA5, GPIOO5, VPIR3);
+
+#define AB4 118
+SIG_EXPR_LIST_DECL_SINGLE(VPIR4, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 14));
+SS_PIN_DECL(AB4, GPIOO6, VPIR4);
+
+#define V7 119
+SIG_EXPR_LIST_DECL_SINGLE(VPIR5, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 15));
+SS_PIN_DECL(V7, GPIOO7, VPIR5);
+
+#define Y6 120
+SIG_EXPR_LIST_DECL_SINGLE(VPIR6, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 16));
+SS_PIN_DECL(Y6, GPIOP0, VPIR6);
+
+#define AB5 121
+SIG_EXPR_LIST_DECL_SINGLE(VPIR7, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 17));
+SS_PIN_DECL(AB5, GPIOP1, VPIR7);
+
+#define W7 122
+SIG_EXPR_LIST_DECL_SINGLE(VPIR8, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 18));
+SS_PIN_DECL(W7, GPIOP2, VPIR8);
+
+#define AA6 123
+SIG_EXPR_LIST_DECL_SINGLE(VPIR9, VPI24, VPI24_DESC, SIG_DESC_SET(SCU88, 19));
+SS_PIN_DECL(AA6, GPIOP3, VPIR9);
+
+FUNC_GROUP_DECL(VPI18, T5, U3, V1, U4, V2, V3, W2, Y1, V4, W3, Y2, AA1, V5,
+ AA22, W5, Y4, AA3, AB2);
+FUNC_GROUP_DECL(VPI24, T5, U3, V1, U4, V2, V3, W2, Y1, V4, W3, Y2, AA1, V5,
+ AA22, W5, Y4, AA3, AB2, V6, Y5, W6, AA5, AB4, V7, Y6, AB5, W7,
+ AA6);
+FUNC_GROUP_DECL(VPI30, T5, U3, V1, U4, V2, W1, U5, V3, W2, Y1, V4, W3, Y2, AA1,
+ V5, W4, Y3, AA22, W5, Y4, AA3, AB2, AA4, AB3);
+
+#define AB6 124
+SIG_EXPR_LIST_DECL_SINGLE(GPIOP4, GPIOP4);
+MS_PIN_DECL_(AB6, SIG_EXPR_LIST_PTR(GPIOP4));
#define Y7 125
SIG_EXPR_LIST_DECL_SINGLE(GPIOP5, GPIOP5);
@@ -619,6 +991,18 @@ SS_PIN_DECL(F5, GPIOQ3, SDA4);
FUNC_GROUP_DECL(I2C4, B1, F5);
+#define I2C14_DESC SIG_DESC_SET(SCU90, 27)
+
+#define H4 132
+SIG_EXPR_LIST_DECL_SINGLE(SCL14, I2C14, I2C14_DESC);
+SS_PIN_DECL(H4, GPIOQ4, SCL14);
+
+#define H3 133
+SIG_EXPR_LIST_DECL_SINGLE(SDA14, I2C14, I2C14_DESC);
+SS_PIN_DECL(H3, GPIOQ5, SDA14);
+
+FUNC_GROUP_DECL(I2C14, H4, H3);
+
#define DASH9028_DESC SIG_DESC_SET(SCU90, 28)
#define H2 134
@@ -776,13 +1160,6 @@ SIG_EXPR_LIST_DECL(ROMA23, SIG_EXPR_PTR(ROMA23, ROM8),
SIG_EXPR_LIST_DECL_SINGLE(VPOR5, VPO24, K18_DESC, VPO_24_OFF);
MS_PIN_DECL(K18, GPIOS7, ROMA23, VPOR5);
-FUNC_GROUP_DECL(ROM8, V20, U21, T19, V22, U20, R18, N21, L22, K18, W21, Y22,
- U19);
-FUNC_GROUP_DECL(ROM16, V20, U21, T19, V22, U20, R18, N21, L22, K18,
- A8, C7, B7, A7, D7, B6, A6, E7, W21, Y22, U19);
-FUNC_GROUP_DECL(VPO12, U21, T19, V22, U20);
-FUNC_GROUP_DECL(VPO24, U21, T19, V22, U20, L22, K18, V21, W22);
-
#define RMII1_DESC SIG_DESC_BIT(HW_STRAP1, 6, 0)
#define A12 152
@@ -827,6 +1204,50 @@ SIG_EXPR_LIST_DECL_SINGLE(RGMII1TXD3, RGMII1);
MS_PIN_DECL_(A13, SIG_EXPR_LIST_PTR(GPIOT5), SIG_EXPR_LIST_PTR(DASHA13),
SIG_EXPR_LIST_PTR(RGMII1TXD3));
+#define RMII2_DESC SIG_DESC_BIT(HW_STRAP1, 7, 0)
+
+#define D9 158
+SIG_EXPR_LIST_DECL_SINGLE(GPIOT6, GPIOT6, SIG_DESC_SET(SCUA0, 6));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXEN, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXCK, RGMII2);
+MS_PIN_DECL_(D9, SIG_EXPR_LIST_PTR(GPIOT6), SIG_EXPR_LIST_PTR(RMII2TXEN),
+ SIG_EXPR_LIST_PTR(RGMII2TXCK));
+
+#define E9 159
+SIG_EXPR_LIST_DECL_SINGLE(GPIOT7, GPIOT7, SIG_DESC_SET(SCUA0, 7));
+SIG_EXPR_LIST_DECL_SINGLE(DASHE9, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXCTL, RGMII2);
+MS_PIN_DECL_(E9, SIG_EXPR_LIST_PTR(GPIOT7), SIG_EXPR_LIST_PTR(DASHE9),
+ SIG_EXPR_LIST_PTR(RGMII2TXCTL));
+
+#define A10 160
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU0, GPIOU0, SIG_DESC_SET(SCUA0, 8));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXD0, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD0, RGMII2);
+MS_PIN_DECL_(A10, SIG_EXPR_LIST_PTR(GPIOU0), SIG_EXPR_LIST_PTR(RMII2TXD0),
+ SIG_EXPR_LIST_PTR(RGMII2TXD0));
+
+#define B10 161
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU1, GPIOU1, SIG_DESC_SET(SCUA0, 9));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2TXD1, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD1, RGMII2);
+MS_PIN_DECL_(B10, SIG_EXPR_LIST_PTR(GPIOU1), SIG_EXPR_LIST_PTR(RMII2TXD1),
+ SIG_EXPR_LIST_PTR(RGMII2TXD1));
+
+#define C10 162
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU2, GPIOU2, SIG_DESC_SET(SCUA0, 10));
+SIG_EXPR_LIST_DECL_SINGLE(DASHC10, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD2, RGMII2);
+MS_PIN_DECL_(C10, SIG_EXPR_LIST_PTR(GPIOU2), SIG_EXPR_LIST_PTR(DASHC10),
+ SIG_EXPR_LIST_PTR(RGMII2TXD2));
+
+#define D10 163
+SIG_EXPR_LIST_DECL_SINGLE(GPIOU3, GPIOU3, SIG_DESC_SET(SCUA0, 11));
+SIG_EXPR_LIST_DECL_SINGLE(DASHD10, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2TXD3, RGMII2);
+MS_PIN_DECL_(D10, SIG_EXPR_LIST_PTR(GPIOU3), SIG_EXPR_LIST_PTR(DASHD10),
+ SIG_EXPR_LIST_PTR(RGMII2TXD3));
+
#define E11 164
SIG_EXPR_LIST_DECL_SINGLE(GPIOU4, GPIOU4, SIG_DESC_SET(SCUA0, 12));
SIG_EXPR_LIST_DECL_SINGLE(RMII1RCLK, RMII1, RMII1_DESC);
@@ -869,11 +1290,419 @@ SIG_EXPR_LIST_DECL_SINGLE(RGMII1RXD3, RGMII1);
MS_PIN_DECL_(E10, SIG_EXPR_LIST_PTR(GPIOV1), SIG_EXPR_LIST_PTR(RMII1RXER),
SIG_EXPR_LIST_PTR(RGMII1RXD3));
+#define C9 170
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV2, GPIOV2, SIG_DESC_SET(SCUA0, 18));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RCLK, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXCK, RGMII2);
+MS_PIN_DECL_(C9, SIG_EXPR_LIST_PTR(GPIOV2), SIG_EXPR_LIST_PTR(RMII2RCLK),
+ SIG_EXPR_LIST_PTR(RGMII2RXCK));
+
+#define B9 171
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV3, GPIOV3, SIG_DESC_SET(SCUA0, 19));
+SIG_EXPR_LIST_DECL_SINGLE(DASHB9, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXCTL, RGMII2);
+MS_PIN_DECL_(B9, SIG_EXPR_LIST_PTR(GPIOV3), SIG_EXPR_LIST_PTR(DASHB9),
+ SIG_EXPR_LIST_PTR(RGMII2RXCTL));
+
+#define A9 172
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV4, GPIOV4, SIG_DESC_SET(SCUA0, 20));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXD0, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD0, RGMII2);
+MS_PIN_DECL_(A9, SIG_EXPR_LIST_PTR(GPIOV4), SIG_EXPR_LIST_PTR(RMII2RXD0),
+ SIG_EXPR_LIST_PTR(RGMII2RXD0));
+
+#define E8 173
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV5, GPIOV5, SIG_DESC_SET(SCUA0, 21));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXD1, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD1, RGMII2);
+MS_PIN_DECL_(E8, SIG_EXPR_LIST_PTR(GPIOV5), SIG_EXPR_LIST_PTR(RMII2RXD1),
+ SIG_EXPR_LIST_PTR(RGMII2RXD1));
+
+#define D8 174
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV6, GPIOV6, SIG_DESC_SET(SCUA0, 22));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2CRSDV, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD2, RGMII2);
+MS_PIN_DECL_(D8, SIG_EXPR_LIST_PTR(GPIOV6), SIG_EXPR_LIST_PTR(RMII2CRSDV),
+ SIG_EXPR_LIST_PTR(RGMII2RXD2));
+
+#define C8 175
+SIG_EXPR_LIST_DECL_SINGLE(GPIOV7, GPIOV7, SIG_DESC_SET(SCUA0, 23));
+SIG_EXPR_LIST_DECL_SINGLE(RMII2RXER, RMII2, RMII2_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(RGMII2RXD3, RGMII2);
+MS_PIN_DECL_(C8, SIG_EXPR_LIST_PTR(GPIOV7), SIG_EXPR_LIST_PTR(RMII2RXER),
+ SIG_EXPR_LIST_PTR(RGMII2RXD3));
+
FUNC_GROUP_DECL(RMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
E10);
FUNC_GROUP_DECL(RGMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
E10);
+FUNC_GROUP_DECL(RMII2, D9, E9, A10, B10, C10, D10, C9, B9, A9, E8, D8, C8);
+FUNC_GROUP_DECL(RGMII2, D9, E9, A10, B10, C10, D10, C9, B9, A9, E8, D8, C8);
+
+#define L5 176
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW0, GPIOW0, SIG_DESC_SET(SCUA0, 24));
+SIG_EXPR_LIST_DECL_SINGLE(ADC0, ADC0);
+MS_PIN_DECL_(L5, SIG_EXPR_LIST_PTR(GPIOW0), SIG_EXPR_LIST_PTR(ADC0));
+FUNC_GROUP_DECL(ADC0, L5);
+
+#define L4 177
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW1, GPIOW1, SIG_DESC_SET(SCUA0, 25));
+SIG_EXPR_LIST_DECL_SINGLE(ADC1, ADC1);
+MS_PIN_DECL_(L4, SIG_EXPR_LIST_PTR(GPIOW1), SIG_EXPR_LIST_PTR(ADC1));
+FUNC_GROUP_DECL(ADC1, L4);
+
+#define L3 178
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW2, GPIOW2, SIG_DESC_SET(SCUA0, 26));
+SIG_EXPR_LIST_DECL_SINGLE(ADC2, ADC2);
+MS_PIN_DECL_(L3, SIG_EXPR_LIST_PTR(GPIOW2), SIG_EXPR_LIST_PTR(ADC2));
+FUNC_GROUP_DECL(ADC2, L3);
+
+#define L2 179
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW3, GPIOW3, SIG_DESC_SET(SCUA0, 27));
+SIG_EXPR_LIST_DECL_SINGLE(ADC3, ADC3);
+MS_PIN_DECL_(L2, SIG_EXPR_LIST_PTR(GPIOW3), SIG_EXPR_LIST_PTR(ADC3));
+FUNC_GROUP_DECL(ADC3, L2);
+
+#define L1 180
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW4, GPIOW4, SIG_DESC_SET(SCUA0, 28));
+SIG_EXPR_LIST_DECL_SINGLE(ADC4, ADC4);
+MS_PIN_DECL_(L1, SIG_EXPR_LIST_PTR(GPIOW4), SIG_EXPR_LIST_PTR(ADC4));
+FUNC_GROUP_DECL(ADC4, L1);
+
+#define M5 181
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW5, GPIOW5, SIG_DESC_SET(SCUA0, 29));
+SIG_EXPR_LIST_DECL_SINGLE(ADC5, ADC5);
+MS_PIN_DECL_(M5, SIG_EXPR_LIST_PTR(GPIOW5), SIG_EXPR_LIST_PTR(ADC5));
+FUNC_GROUP_DECL(ADC5, M5);
+
+#define M4 182
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW6, GPIOW6, SIG_DESC_SET(SCUA0, 30));
+SIG_EXPR_LIST_DECL_SINGLE(ADC6, ADC6);
+MS_PIN_DECL_(M4, SIG_EXPR_LIST_PTR(GPIOW6), SIG_EXPR_LIST_PTR(ADC6));
+FUNC_GROUP_DECL(ADC6, M4);
+
+#define M3 183
+SIG_EXPR_LIST_DECL_SINGLE(GPIOW7, GPIOW7, SIG_DESC_SET(SCUA0, 31));
+SIG_EXPR_LIST_DECL_SINGLE(ADC7, ADC7);
+MS_PIN_DECL_(M3, SIG_EXPR_LIST_PTR(GPIOW7), SIG_EXPR_LIST_PTR(ADC7));
+FUNC_GROUP_DECL(ADC7, M3);
+
+#define M2 184
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX0, GPIOX0, SIG_DESC_SET(SCUA4, 0));
+SIG_EXPR_LIST_DECL_SINGLE(ADC8, ADC8);
+MS_PIN_DECL_(M2, SIG_EXPR_LIST_PTR(GPIOX0), SIG_EXPR_LIST_PTR(ADC8));
+FUNC_GROUP_DECL(ADC8, M2);
+
+#define M1 185
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX1, GPIOX1, SIG_DESC_SET(SCUA4, 1));
+SIG_EXPR_LIST_DECL_SINGLE(ADC9, ADC9);
+MS_PIN_DECL_(M1, SIG_EXPR_LIST_PTR(GPIOX1), SIG_EXPR_LIST_PTR(ADC9));
+FUNC_GROUP_DECL(ADC9, M1);
+
+#define N5 186
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX2, GPIOX2, SIG_DESC_SET(SCUA4, 2));
+SIG_EXPR_LIST_DECL_SINGLE(ADC10, ADC10);
+MS_PIN_DECL_(N5, SIG_EXPR_LIST_PTR(GPIOX2), SIG_EXPR_LIST_PTR(ADC10));
+FUNC_GROUP_DECL(ADC10, N5);
+
+#define N4 187
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX3, GPIOX3, SIG_DESC_SET(SCUA4, 3));
+SIG_EXPR_LIST_DECL_SINGLE(ADC11, ADC11);
+MS_PIN_DECL_(N4, SIG_EXPR_LIST_PTR(GPIOX3), SIG_EXPR_LIST_PTR(ADC11));
+FUNC_GROUP_DECL(ADC11, N4);
+
+#define N3 188
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX4, GPIOX4, SIG_DESC_SET(SCUA4, 4));
+SIG_EXPR_LIST_DECL_SINGLE(ADC12, ADC12);
+MS_PIN_DECL_(N3, SIG_EXPR_LIST_PTR(GPIOX4), SIG_EXPR_LIST_PTR(ADC12));
+FUNC_GROUP_DECL(ADC12, N3);
+
+#define N2 189
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX5, GPIOX5, SIG_DESC_SET(SCUA4, 5));
+SIG_EXPR_LIST_DECL_SINGLE(ADC13, ADC13);
+MS_PIN_DECL_(N2, SIG_EXPR_LIST_PTR(GPIOX5), SIG_EXPR_LIST_PTR(ADC13));
+FUNC_GROUP_DECL(ADC13, N2);
+
+#define N1 190
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX6, GPIOX6, SIG_DESC_SET(SCUA4, 6));
+SIG_EXPR_LIST_DECL_SINGLE(ADC14, ADC14);
+MS_PIN_DECL_(N1, SIG_EXPR_LIST_PTR(GPIOX6), SIG_EXPR_LIST_PTR(ADC14));
+FUNC_GROUP_DECL(ADC14, N1);
+
+#define P5 191
+SIG_EXPR_LIST_DECL_SINGLE(GPIOX7, GPIOX7, SIG_DESC_SET(SCUA4, 7));
+SIG_EXPR_LIST_DECL_SINGLE(ADC15, ADC15);
+MS_PIN_DECL_(P5, SIG_EXPR_LIST_PTR(GPIOX7), SIG_EXPR_LIST_PTR(ADC15));
+FUNC_GROUP_DECL(ADC15, P5);
+
+#define C21 192
+SIG_EXPR_DECL(SIOS3, SIOS3, SIG_DESC_SET(SCUA4, 8));
+SIG_EXPR_DECL(SIOS3, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS3, SIOS3, ACPI);
+SS_PIN_DECL(C21, GPIOY0, SIOS3);
+FUNC_GROUP_DECL(SIOS3, C21);
+
+#define F20 193
+SIG_EXPR_DECL(SIOS5, SIOS5, SIG_DESC_SET(SCUA4, 9));
+SIG_EXPR_DECL(SIOS5, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOS5, SIOS5, ACPI);
+SS_PIN_DECL(F20, GPIOY1, SIOS5);
+FUNC_GROUP_DECL(SIOS5, F20);
+
+#define G20 194
+SIG_EXPR_DECL(SIOPWREQ, SIOPWREQ, SIG_DESC_SET(SCUA4, 10));
+SIG_EXPR_DECL(SIOPWREQ, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOPWREQ, SIOPWREQ, ACPI);
+SS_PIN_DECL(G20, GPIOY2, SIOPWREQ);
+FUNC_GROUP_DECL(SIOPWREQ, G20);
+
+#define K20 195
+SIG_EXPR_DECL(SIOONCTRL, SIOONCTRL, SIG_DESC_SET(SCUA4, 11));
+SIG_EXPR_DECL(SIOONCTRL, ACPI, ACPI_DESC);
+SIG_EXPR_LIST_DECL_DUAL(SIOONCTRL, SIOONCTRL, ACPI);
+SS_PIN_DECL(K20, GPIOY3, SIOONCTRL);
+FUNC_GROUP_DECL(SIOONCTRL, K20);
+
+FUNC_GROUP_DECL(ACPI, B19, A20, D17, A19, C21, F20, G20, K20);
+
+#define R22 200
+#define R22_DESC SIG_DESC_SET(SCUA4, 16)
+SIG_EXPR_DECL(ROMA2, ROM8, R22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA2, ROM16, R22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA2, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB0, VPO12, R22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB0, VPO24, R22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB0, VPOOFF1, R22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB0, SIG_EXPR_PTR(VPOB0, VPO12),
+ SIG_EXPR_PTR(VPOB0, VPO24), SIG_EXPR_PTR(VPOB0, VPOOFF1));
+MS_PIN_DECL(R22, GPIOZ0, ROMA2, VPOB0);
+
+#define P18 201
+#define P18_DESC SIG_DESC_SET(SCUA4, 17)
+SIG_EXPR_DECL(ROMA3, ROM8, P18_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA3, ROM16, P18_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA3, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB1, VPO12, P18_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB1, VPO24, P18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB1, VPOOFF1, P18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB1, SIG_EXPR_PTR(VPOB1, VPO12),
+ SIG_EXPR_PTR(VPOB1, VPO24), SIG_EXPR_PTR(VPOB1, VPOOFF1));
+MS_PIN_DECL(P18, GPIOZ1, ROMA3, VPOB1);
+
+#define P19 202
+#define P19_DESC SIG_DESC_SET(SCUA4, 18)
+SIG_EXPR_DECL(ROMA4, ROM8, P19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA4, ROM16, P19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA4, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB2, VPO12, P19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB2, VPO24, P19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB2, VPOOFF1, P19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB2, SIG_EXPR_PTR(VPOB2, VPO12),
+ SIG_EXPR_PTR(VPOB2, VPO24), SIG_EXPR_PTR(VPOB2, VPOOFF1));
+MS_PIN_DECL(P19, GPIOZ2, ROMA4, VPOB2);
+
+#define P20 203
+#define P20_DESC SIG_DESC_SET(SCUA4, 19)
+SIG_EXPR_DECL(ROMA5, ROM8, P20_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA5, ROM16, P20_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA5, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB3, VPO12, P20_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB3, VPO24, P20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB3, VPOOFF1, P20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB3, SIG_EXPR_PTR(VPOB3, VPO12),
+ SIG_EXPR_PTR(VPOB3, VPO24), SIG_EXPR_PTR(VPOB3, VPOOFF1));
+MS_PIN_DECL(P20, GPIOZ3, ROMA5, VPOB3);
+
+#define P21 204
+#define P21_DESC SIG_DESC_SET(SCUA4, 20)
+SIG_EXPR_DECL(ROMA6, ROM8, P21_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA6, ROM16, P21_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA6, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB4, VPO12, P21_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB4, VPO24, P21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB4, VPOOFF1, P21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB4, SIG_EXPR_PTR(VPOB4, VPO12),
+ SIG_EXPR_PTR(VPOB4, VPO24), SIG_EXPR_PTR(VPOB4, VPOOFF1));
+MS_PIN_DECL(P21, GPIOZ4, ROMA6, VPOB4);
+
+#define P22 205
+#define P22_DESC SIG_DESC_SET(SCUA4, 21)
+SIG_EXPR_DECL(ROMA7, ROM8, P22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA7, ROM16, P22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA7, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB5, VPO12, P22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB5, VPO24, P22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB5, VPOOFF1, P22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB5, SIG_EXPR_PTR(VPOB5, VPO12),
+ SIG_EXPR_PTR(VPOB5, VPO24), SIG_EXPR_PTR(VPOB5, VPOOFF1));
+MS_PIN_DECL(P22, GPIOZ5, ROMA7, VPOB5);
+
+#define M19 206
+#define M19_DESC SIG_DESC_SET(SCUA4, 22)
+SIG_EXPR_DECL(ROMA8, ROM8, M19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA8, ROM16, M19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA8, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB6, VPO12, M19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB6, VPO24, M19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB6, VPOOFF1, M19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB6, SIG_EXPR_PTR(VPOB6, VPO12),
+ SIG_EXPR_PTR(VPOB6, VPO24), SIG_EXPR_PTR(VPOB6, VPOOFF1));
+MS_PIN_DECL(M19, GPIOZ6, ROMA8, VPOB6);
+
+#define M20 207
+#define M20_DESC SIG_DESC_SET(SCUA4, 23)
+SIG_EXPR_DECL(ROMA9, ROM8, M20_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA9, ROM16, M20_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA9, ROM8, ROM16);
+SIG_EXPR_DECL(VPOB7, VPO12, M20_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOB7, VPO24, M20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOB7, VPOOFF1, M20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOB7, SIG_EXPR_PTR(VPOB7, VPO12),
+ SIG_EXPR_PTR(VPOB7, VPO24), SIG_EXPR_PTR(VPOB7, VPOOFF1));
+MS_PIN_DECL(M20, GPIOZ7, ROMA9, VPOB7);
+
+#define M21 208
+#define M21_DESC SIG_DESC_SET(SCUA4, 24)
+SIG_EXPR_DECL(ROMA10, ROM8, M21_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA10, ROM16, M21_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA10, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG0, VPO12, M21_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG0, VPO24, M21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG0, VPOOFF1, M21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG0, SIG_EXPR_PTR(VPOG0, VPO12),
+ SIG_EXPR_PTR(VPOG0, VPO24), SIG_EXPR_PTR(VPOG0, VPOOFF1));
+MS_PIN_DECL(M21, GPIOAA0, ROMA10, VPOG0);
+
+#define M22 209
+#define M22_DESC SIG_DESC_SET(SCUA4, 25)
+SIG_EXPR_DECL(ROMA11, ROM8, M22_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA11, ROM16, M22_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA11, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG1, VPO12, M22_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG1, VPO24, M22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG1, VPOOFF1, M22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG1, SIG_EXPR_PTR(VPOG1, VPO12),
+ SIG_EXPR_PTR(VPOG1, VPO24), SIG_EXPR_PTR(VPOG1, VPOOFF1));
+MS_PIN_DECL(M22, GPIOAA1, ROMA11, VPOG1);
+
+#define L18 210
+#define L18_DESC SIG_DESC_SET(SCUA4, 26)
+SIG_EXPR_DECL(ROMA12, ROM8, L18_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA12, ROM16, L18_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA12, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG2, VPO12, L18_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG2, VPO24, L18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG2, VPOOFF1, L18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG2, SIG_EXPR_PTR(VPOG2, VPO12),
+ SIG_EXPR_PTR(VPOG2, VPO24), SIG_EXPR_PTR(VPOG2, VPOOFF1));
+MS_PIN_DECL(L18, GPIOAA2, ROMA12, VPOG2);
+
+#define L19 211
+#define L19_DESC SIG_DESC_SET(SCUA4, 27)
+SIG_EXPR_DECL(ROMA13, ROM8, L19_DESC, VPOOFF0_DESC);
+SIG_EXPR_DECL(ROMA13, ROM16, L19_DESC, VPOOFF0_DESC);
+SIG_EXPR_LIST_DECL_DUAL(ROMA13, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG3, VPO12, L19_DESC, VPO12_DESC);
+SIG_EXPR_DECL(VPOG3, VPO24, L19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG3, VPOOFF1, L19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL(VPOG3, SIG_EXPR_PTR(VPOG3, VPO12),
+ SIG_EXPR_PTR(VPOG3, VPO24), SIG_EXPR_PTR(VPOG3, VPOOFF1));
+MS_PIN_DECL(L19, GPIOAA3, ROMA13, VPOG3);
+
+#define L20 212
+#define L20_DESC SIG_DESC_SET(SCUA4, 28)
+SIG_EXPR_DECL(ROMA14, ROM8, L20_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA14, ROM16, L20_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA14, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG4, VPO24, L20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG4, VPOOFF1, L20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG4, VPO24, VPOOFF1);
+MS_PIN_DECL(L20, GPIOAA4, ROMA14, VPOG4);
+
+#define L21 213
+#define L21_DESC SIG_DESC_SET(SCUA4, 29)
+SIG_EXPR_DECL(ROMA15, ROM8, L21_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA15, ROM16, L21_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA15, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG5, VPO24, L21_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG5, VPOOFF1, L21_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG5, VPO24, VPOOFF1);
+MS_PIN_DECL(L21, GPIOAA5, ROMA15, VPOG5);
+
+#define T18 214
+#define T18_DESC SIG_DESC_SET(SCUA4, 30)
+SIG_EXPR_DECL(ROMA16, ROM8, T18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA16, ROM16, T18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA16, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG6, VPO24, T18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG6, VPOOFF1, T18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG6, VPO24, VPOOFF1);
+MS_PIN_DECL(T18, GPIOAA6, ROMA16, VPOG6);
+
+#define N18 215
+#define N18_DESC SIG_DESC_SET(SCUA4, 31)
+SIG_EXPR_DECL(ROMA17, ROM8, N18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA17, ROM16, N18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA17, ROM8, ROM16);
+SIG_EXPR_DECL(VPOG7, VPO24, N18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOG7, VPOOFF1, N18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOG7, VPO24, VPOOFF1);
+MS_PIN_DECL(N18, GPIOAA7, ROMA17, VPOG7);
+
+#define N19 216
+#define N19_DESC SIG_DESC_SET(SCUA8, 0)
+SIG_EXPR_DECL(ROMA18, ROM8, N19_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA18, ROM16, N19_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA18, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR0, VPO24, N19_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR0, VPOOFF1, N19_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR0, VPO24, VPOOFF1);
+MS_PIN_DECL(N19, GPIOAB0, ROMA18, VPOR0);
+
+#define M18 217
+#define M18_DESC SIG_DESC_SET(SCUA8, 1)
+SIG_EXPR_DECL(ROMA19, ROM8, M18_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA19, ROM16, M18_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA19, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR1, VPO24, M18_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR1, VPOOFF1, M18_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR1, VPO24, VPOOFF1);
+MS_PIN_DECL(M18, GPIOAB1, ROMA19, VPOR1);
+
+#define N22 218
+#define N22_DESC SIG_DESC_SET(SCUA8, 2)
+SIG_EXPR_DECL(ROMA20, ROM8, N22_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA20, ROM16, N22_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA20, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR2, VPO24, N22_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR2, VPOOFF1, N22_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR2, VPO24, VPOOFF1);
+MS_PIN_DECL(N22, GPIOAB2, ROMA20, VPOR2);
+
+#define N20 219
+#define N20_DESC SIG_DESC_SET(SCUA8, 3)
+SIG_EXPR_DECL(ROMA21, ROM8, N20_DESC, VPO_24_OFF);
+SIG_EXPR_DECL(ROMA21, ROM16, N20_DESC, VPO_24_OFF);
+SIG_EXPR_LIST_DECL_DUAL(ROMA21, ROM8, ROM16);
+SIG_EXPR_DECL(VPOR3, VPO24, N20_DESC, VPO24_DESC);
+SIG_EXPR_DECL(VPOR3, VPOOFF1, N20_DESC, VPOOFF1_DESC);
+SIG_EXPR_LIST_DECL_DUAL(VPOR3, VPO24, VPOOFF1);
+MS_PIN_DECL(N20, GPIOAB3, ROMA21, VPOR3);
+
+FUNC_GROUP_DECL(ROM8, V20, U21, T19, V22, U20, R18, N21, L22, K18, W21, Y22,
+ U19, R22, P18, P19, P20, P21, P22, M19, M20, M21, M22, L18,
+ L19, L20, L21, T18, N18, N19, M18, N22, N20);
+FUNC_GROUP_DECL(ROM16, V20, U21, T19, V22, U20, R18, N21, L22, K18,
+ A8, C7, B7, A7, D7, B6, A6, E7, W21, Y22, U19, R22, P18, P19,
+ P20, P21, P22, M19, M20, M21, M22, L18, L19, L20, L21, T18,
+ N18, N19, M18, N22, N20);
+FUNC_GROUP_DECL(VPO12, U21, T19, V22, U20, R22, P18, P19, P20, P21, P22, M19,
+ M20, M21, M22, L18, L19, L20, L21, T18, N18, N19, M18, N22,
+ N20);
+FUNC_GROUP_DECL(VPO24, U21, T19, V22, U20, L22, K18, V21, W22, R22, P18, P19,
+ P20, P21, P22, M19, M20, M21, M22, L18, L19);
+
/* Note we account for GPIOY4-GPIOY7 even though they're not valid, thus 216
* pins becomes 220.
*/
@@ -883,84 +1712,180 @@ FUNC_GROUP_DECL(RGMII1, A12, B12, C12, D12, E12, A13, E11, D11, C11, B11, A11,
static struct pinctrl_pin_desc aspeed_g4_pins[ASPEED_G4_NR_PINS] = {
ASPEED_PINCTRL_PIN(A1),
+ ASPEED_PINCTRL_PIN(A10),
ASPEED_PINCTRL_PIN(A11),
ASPEED_PINCTRL_PIN(A12),
ASPEED_PINCTRL_PIN(A13),
+ ASPEED_PINCTRL_PIN(A14),
ASPEED_PINCTRL_PIN(A15),
+ ASPEED_PINCTRL_PIN(A16),
+ ASPEED_PINCTRL_PIN(A17),
ASPEED_PINCTRL_PIN(A18),
+ ASPEED_PINCTRL_PIN(A19),
ASPEED_PINCTRL_PIN(A2),
+ ASPEED_PINCTRL_PIN(A20),
ASPEED_PINCTRL_PIN(A3),
ASPEED_PINCTRL_PIN(A4),
ASPEED_PINCTRL_PIN(A5),
ASPEED_PINCTRL_PIN(A6),
ASPEED_PINCTRL_PIN(A7),
ASPEED_PINCTRL_PIN(A8),
+ ASPEED_PINCTRL_PIN(A9),
+ ASPEED_PINCTRL_PIN(AA1),
ASPEED_PINCTRL_PIN(AA2),
ASPEED_PINCTRL_PIN(AA22),
ASPEED_PINCTRL_PIN(AA3),
+ ASPEED_PINCTRL_PIN(AA4),
+ ASPEED_PINCTRL_PIN(AA5),
+ ASPEED_PINCTRL_PIN(AA6),
ASPEED_PINCTRL_PIN(AA7),
ASPEED_PINCTRL_PIN(AB1),
ASPEED_PINCTRL_PIN(AB2),
+ ASPEED_PINCTRL_PIN(AB3),
+ ASPEED_PINCTRL_PIN(AB4),
+ ASPEED_PINCTRL_PIN(AB5),
+ ASPEED_PINCTRL_PIN(AB6),
ASPEED_PINCTRL_PIN(AB7),
ASPEED_PINCTRL_PIN(B1),
+ ASPEED_PINCTRL_PIN(B10),
ASPEED_PINCTRL_PIN(B11),
ASPEED_PINCTRL_PIN(B12),
+ ASPEED_PINCTRL_PIN(B13),
ASPEED_PINCTRL_PIN(B14),
ASPEED_PINCTRL_PIN(B15),
+ ASPEED_PINCTRL_PIN(B16),
+ ASPEED_PINCTRL_PIN(B17),
+ ASPEED_PINCTRL_PIN(B18),
ASPEED_PINCTRL_PIN(B19),
ASPEED_PINCTRL_PIN(B2),
+ ASPEED_PINCTRL_PIN(B22),
ASPEED_PINCTRL_PIN(B3),
ASPEED_PINCTRL_PIN(B4),
+ ASPEED_PINCTRL_PIN(B5),
ASPEED_PINCTRL_PIN(B6),
ASPEED_PINCTRL_PIN(B7),
+ ASPEED_PINCTRL_PIN(B9),
ASPEED_PINCTRL_PIN(C1),
+ ASPEED_PINCTRL_PIN(C10),
ASPEED_PINCTRL_PIN(C11),
ASPEED_PINCTRL_PIN(C12),
+ ASPEED_PINCTRL_PIN(C13),
ASPEED_PINCTRL_PIN(C14),
ASPEED_PINCTRL_PIN(C15),
+ ASPEED_PINCTRL_PIN(C16),
ASPEED_PINCTRL_PIN(C17),
+ ASPEED_PINCTRL_PIN(C18),
ASPEED_PINCTRL_PIN(C2),
+ ASPEED_PINCTRL_PIN(C20),
+ ASPEED_PINCTRL_PIN(C21),
+ ASPEED_PINCTRL_PIN(C22),
ASPEED_PINCTRL_PIN(C3),
ASPEED_PINCTRL_PIN(C4),
ASPEED_PINCTRL_PIN(C5),
ASPEED_PINCTRL_PIN(C6),
ASPEED_PINCTRL_PIN(C7),
+ ASPEED_PINCTRL_PIN(C8),
+ ASPEED_PINCTRL_PIN(C9),
ASPEED_PINCTRL_PIN(D1),
+ ASPEED_PINCTRL_PIN(D10),
ASPEED_PINCTRL_PIN(D11),
ASPEED_PINCTRL_PIN(D12),
+ ASPEED_PINCTRL_PIN(D13),
ASPEED_PINCTRL_PIN(D14),
ASPEED_PINCTRL_PIN(D15),
ASPEED_PINCTRL_PIN(D16),
ASPEED_PINCTRL_PIN(D17),
ASPEED_PINCTRL_PIN(D18),
+ ASPEED_PINCTRL_PIN(D19),
ASPEED_PINCTRL_PIN(D2),
ASPEED_PINCTRL_PIN(D3),
ASPEED_PINCTRL_PIN(D4),
ASPEED_PINCTRL_PIN(D5),
+ ASPEED_PINCTRL_PIN(D6),
ASPEED_PINCTRL_PIN(D7),
+ ASPEED_PINCTRL_PIN(D8),
+ ASPEED_PINCTRL_PIN(D9),
ASPEED_PINCTRL_PIN(E10),
ASPEED_PINCTRL_PIN(E11),
ASPEED_PINCTRL_PIN(E12),
+ ASPEED_PINCTRL_PIN(E13),
ASPEED_PINCTRL_PIN(E14),
+ ASPEED_PINCTRL_PIN(E15),
ASPEED_PINCTRL_PIN(E16),
+ ASPEED_PINCTRL_PIN(E18),
+ ASPEED_PINCTRL_PIN(E19),
ASPEED_PINCTRL_PIN(E2),
+ ASPEED_PINCTRL_PIN(E20),
ASPEED_PINCTRL_PIN(E3),
ASPEED_PINCTRL_PIN(E5),
+ ASPEED_PINCTRL_PIN(E6),
ASPEED_PINCTRL_PIN(E7),
+ ASPEED_PINCTRL_PIN(E8),
+ ASPEED_PINCTRL_PIN(E9),
+ ASPEED_PINCTRL_PIN(F18),
+ ASPEED_PINCTRL_PIN(F20),
ASPEED_PINCTRL_PIN(F3),
ASPEED_PINCTRL_PIN(F4),
ASPEED_PINCTRL_PIN(F5),
+ ASPEED_PINCTRL_PIN(G18),
+ ASPEED_PINCTRL_PIN(G19),
+ ASPEED_PINCTRL_PIN(G20),
ASPEED_PINCTRL_PIN(G5),
ASPEED_PINCTRL_PIN(H1),
+ ASPEED_PINCTRL_PIN(H18),
ASPEED_PINCTRL_PIN(H19),
ASPEED_PINCTRL_PIN(H2),
ASPEED_PINCTRL_PIN(H20),
+ ASPEED_PINCTRL_PIN(H3),
+ ASPEED_PINCTRL_PIN(H4),
+ ASPEED_PINCTRL_PIN(J20),
+ ASPEED_PINCTRL_PIN(J21),
ASPEED_PINCTRL_PIN(J3),
+ ASPEED_PINCTRL_PIN(J4),
+ ASPEED_PINCTRL_PIN(J5),
ASPEED_PINCTRL_PIN(K18),
+ ASPEED_PINCTRL_PIN(K20),
+ ASPEED_PINCTRL_PIN(K5),
+ ASPEED_PINCTRL_PIN(L1),
+ ASPEED_PINCTRL_PIN(L18),
+ ASPEED_PINCTRL_PIN(L19),
+ ASPEED_PINCTRL_PIN(L2),
+ ASPEED_PINCTRL_PIN(L20),
+ ASPEED_PINCTRL_PIN(L21),
ASPEED_PINCTRL_PIN(L22),
+ ASPEED_PINCTRL_PIN(L3),
+ ASPEED_PINCTRL_PIN(L4),
+ ASPEED_PINCTRL_PIN(L5),
+ ASPEED_PINCTRL_PIN(M1),
+ ASPEED_PINCTRL_PIN(M18),
+ ASPEED_PINCTRL_PIN(M19),
+ ASPEED_PINCTRL_PIN(M2),
+ ASPEED_PINCTRL_PIN(M20),
+ ASPEED_PINCTRL_PIN(M21),
+ ASPEED_PINCTRL_PIN(M22),
+ ASPEED_PINCTRL_PIN(M3),
+ ASPEED_PINCTRL_PIN(M4),
+ ASPEED_PINCTRL_PIN(M5),
+ ASPEED_PINCTRL_PIN(N1),
+ ASPEED_PINCTRL_PIN(N18),
+ ASPEED_PINCTRL_PIN(N19),
+ ASPEED_PINCTRL_PIN(N2),
+ ASPEED_PINCTRL_PIN(N20),
ASPEED_PINCTRL_PIN(N21),
+ ASPEED_PINCTRL_PIN(N22),
+ ASPEED_PINCTRL_PIN(N3),
+ ASPEED_PINCTRL_PIN(N4),
+ ASPEED_PINCTRL_PIN(N5),
+ ASPEED_PINCTRL_PIN(P18),
+ ASPEED_PINCTRL_PIN(P19),
+ ASPEED_PINCTRL_PIN(P20),
+ ASPEED_PINCTRL_PIN(P21),
+ ASPEED_PINCTRL_PIN(P22),
+ ASPEED_PINCTRL_PIN(P5),
ASPEED_PINCTRL_PIN(R18),
+ ASPEED_PINCTRL_PIN(R22),
ASPEED_PINCTRL_PIN(T1),
+ ASPEED_PINCTRL_PIN(T18),
ASPEED_PINCTRL_PIN(T19),
ASPEED_PINCTRL_PIN(T2),
ASPEED_PINCTRL_PIN(T4),
@@ -979,28 +1904,61 @@ static struct pinctrl_pin_desc aspeed_g4_pins[ASPEED_G4_NR_PINS] = {
ASPEED_PINCTRL_PIN(V20),
ASPEED_PINCTRL_PIN(V21),
ASPEED_PINCTRL_PIN(V22),
+ ASPEED_PINCTRL_PIN(V3),
+ ASPEED_PINCTRL_PIN(V4),
+ ASPEED_PINCTRL_PIN(V5),
ASPEED_PINCTRL_PIN(V6),
+ ASPEED_PINCTRL_PIN(V7),
ASPEED_PINCTRL_PIN(W1),
+ ASPEED_PINCTRL_PIN(W2),
ASPEED_PINCTRL_PIN(W21),
ASPEED_PINCTRL_PIN(W22),
+ ASPEED_PINCTRL_PIN(W3),
ASPEED_PINCTRL_PIN(W4),
ASPEED_PINCTRL_PIN(W5),
+ ASPEED_PINCTRL_PIN(W6),
+ ASPEED_PINCTRL_PIN(W7),
+ ASPEED_PINCTRL_PIN(Y1),
+ ASPEED_PINCTRL_PIN(Y2),
+ ASPEED_PINCTRL_PIN(Y21),
ASPEED_PINCTRL_PIN(Y22),
ASPEED_PINCTRL_PIN(Y3),
ASPEED_PINCTRL_PIN(Y4),
ASPEED_PINCTRL_PIN(Y5),
+ ASPEED_PINCTRL_PIN(Y6),
ASPEED_PINCTRL_PIN(Y7),
};
static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(ACPI),
+ ASPEED_PINCTRL_GROUP(ADC0),
+ ASPEED_PINCTRL_GROUP(ADC1),
+ ASPEED_PINCTRL_GROUP(ADC10),
+ ASPEED_PINCTRL_GROUP(ADC11),
+ ASPEED_PINCTRL_GROUP(ADC12),
+ ASPEED_PINCTRL_GROUP(ADC13),
+ ASPEED_PINCTRL_GROUP(ADC14),
+ ASPEED_PINCTRL_GROUP(ADC15),
+ ASPEED_PINCTRL_GROUP(ADC2),
+ ASPEED_PINCTRL_GROUP(ADC3),
+ ASPEED_PINCTRL_GROUP(ADC4),
+ ASPEED_PINCTRL_GROUP(ADC5),
+ ASPEED_PINCTRL_GROUP(ADC6),
+ ASPEED_PINCTRL_GROUP(ADC7),
+ ASPEED_PINCTRL_GROUP(ADC8),
+ ASPEED_PINCTRL_GROUP(ADC9),
ASPEED_PINCTRL_GROUP(BMCINT),
ASPEED_PINCTRL_GROUP(DDCCLK),
ASPEED_PINCTRL_GROUP(DDCDAT),
+ ASPEED_PINCTRL_GROUP(EXTRST),
ASPEED_PINCTRL_GROUP(FLACK),
ASPEED_PINCTRL_GROUP(FLBUSY),
ASPEED_PINCTRL_GROUP(FLWP),
+ ASPEED_PINCTRL_GROUP(GPID),
ASPEED_PINCTRL_GROUP(GPID0),
+ ASPEED_PINCTRL_GROUP(GPID2),
+ ASPEED_PINCTRL_GROUP(GPID4),
+ ASPEED_PINCTRL_GROUP(GPID6),
ASPEED_PINCTRL_GROUP(GPIE0),
ASPEED_PINCTRL_GROUP(GPIE2),
ASPEED_PINCTRL_GROUP(GPIE4),
@@ -1009,6 +1967,7 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(I2C11),
ASPEED_PINCTRL_GROUP(I2C12),
ASPEED_PINCTRL_GROUP(I2C13),
+ ASPEED_PINCTRL_GROUP(I2C14),
ASPEED_PINCTRL_GROUP(I2C3),
ASPEED_PINCTRL_GROUP(I2C4),
ASPEED_PINCTRL_GROUP(I2C5),
@@ -1018,25 +1977,37 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(I2C9),
ASPEED_PINCTRL_GROUP(LPCPD),
ASPEED_PINCTRL_GROUP(LPCPME),
- ASPEED_PINCTRL_GROUP(LPCPME),
+ ASPEED_PINCTRL_GROUP(LPCRST),
ASPEED_PINCTRL_GROUP(LPCSMI),
+ ASPEED_PINCTRL_GROUP(MAC1LINK),
+ ASPEED_PINCTRL_GROUP(MAC2LINK),
ASPEED_PINCTRL_GROUP(MDIO1),
ASPEED_PINCTRL_GROUP(MDIO2),
ASPEED_PINCTRL_GROUP(NCTS1),
+ ASPEED_PINCTRL_GROUP(NCTS2),
ASPEED_PINCTRL_GROUP(NCTS3),
ASPEED_PINCTRL_GROUP(NCTS4),
ASPEED_PINCTRL_GROUP(NDCD1),
+ ASPEED_PINCTRL_GROUP(NDCD2),
ASPEED_PINCTRL_GROUP(NDCD3),
ASPEED_PINCTRL_GROUP(NDCD4),
ASPEED_PINCTRL_GROUP(NDSR1),
+ ASPEED_PINCTRL_GROUP(NDSR2),
ASPEED_PINCTRL_GROUP(NDSR3),
+ ASPEED_PINCTRL_GROUP(NDSR4),
ASPEED_PINCTRL_GROUP(NDTR1),
+ ASPEED_PINCTRL_GROUP(NDTR2),
ASPEED_PINCTRL_GROUP(NDTR3),
+ ASPEED_PINCTRL_GROUP(NDTR4),
+ ASPEED_PINCTRL_GROUP(NDTS4),
ASPEED_PINCTRL_GROUP(NRI1),
+ ASPEED_PINCTRL_GROUP(NRI2),
ASPEED_PINCTRL_GROUP(NRI3),
ASPEED_PINCTRL_GROUP(NRI4),
ASPEED_PINCTRL_GROUP(NRTS1),
+ ASPEED_PINCTRL_GROUP(NRTS2),
ASPEED_PINCTRL_GROUP(NRTS3),
+ ASPEED_PINCTRL_GROUP(OSCCLK),
ASPEED_PINCTRL_GROUP(PWM0),
ASPEED_PINCTRL_GROUP(PWM1),
ASPEED_PINCTRL_GROUP(PWM2),
@@ -1046,7 +2017,9 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(PWM6),
ASPEED_PINCTRL_GROUP(PWM7),
ASPEED_PINCTRL_GROUP(RGMII1),
+ ASPEED_PINCTRL_GROUP(RGMII2),
ASPEED_PINCTRL_GROUP(RMII1),
+ ASPEED_PINCTRL_GROUP(RMII2),
ASPEED_PINCTRL_GROUP(ROM16),
ASPEED_PINCTRL_GROUP(ROM8),
ASPEED_PINCTRL_GROUP(ROMCS1),
@@ -1054,21 +2027,48 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(ROMCS3),
ASPEED_PINCTRL_GROUP(ROMCS4),
ASPEED_PINCTRL_GROUP(RXD1),
+ ASPEED_PINCTRL_GROUP(RXD2),
ASPEED_PINCTRL_GROUP(RXD3),
ASPEED_PINCTRL_GROUP(RXD4),
+ ASPEED_PINCTRL_GROUP(SALT1),
+ ASPEED_PINCTRL_GROUP(SALT2),
+ ASPEED_PINCTRL_GROUP(SALT3),
+ ASPEED_PINCTRL_GROUP(SALT4),
ASPEED_PINCTRL_GROUP(SD1),
+ ASPEED_PINCTRL_GROUP(SD2),
+ ASPEED_PINCTRL_GROUP(SGPMCK),
ASPEED_PINCTRL_GROUP(SGPMI),
+ ASPEED_PINCTRL_GROUP(SGPMLD),
+ ASPEED_PINCTRL_GROUP(SGPMO),
+ ASPEED_PINCTRL_GROUP(SGPSCK),
+ ASPEED_PINCTRL_GROUP(SGPSI0),
+ ASPEED_PINCTRL_GROUP(SGPSI1),
+ ASPEED_PINCTRL_GROUP(SGPSLD),
+ ASPEED_PINCTRL_GROUP(SIOONCTRL),
ASPEED_PINCTRL_GROUP(SIOPBI),
ASPEED_PINCTRL_GROUP(SIOPBO),
+ ASPEED_PINCTRL_GROUP(SIOPWREQ),
+ ASPEED_PINCTRL_GROUP(SIOPWRGD),
+ ASPEED_PINCTRL_GROUP(SIOS3),
+ ASPEED_PINCTRL_GROUP(SIOS5),
+ ASPEED_PINCTRL_GROUP(SIOSCI),
+ ASPEED_PINCTRL_GROUP(SPI1),
+ ASPEED_PINCTRL_GROUP(SPI1DEBUG),
+ ASPEED_PINCTRL_GROUP(SPI1PASSTHRU),
+ ASPEED_PINCTRL_GROUP(SPICS1),
ASPEED_PINCTRL_GROUP(TIMER3),
+ ASPEED_PINCTRL_GROUP(TIMER4),
ASPEED_PINCTRL_GROUP(TIMER5),
ASPEED_PINCTRL_GROUP(TIMER6),
ASPEED_PINCTRL_GROUP(TIMER7),
ASPEED_PINCTRL_GROUP(TIMER8),
ASPEED_PINCTRL_GROUP(TXD1),
+ ASPEED_PINCTRL_GROUP(TXD2),
ASPEED_PINCTRL_GROUP(TXD3),
ASPEED_PINCTRL_GROUP(TXD4),
ASPEED_PINCTRL_GROUP(UART6),
+ ASPEED_PINCTRL_GROUP(USBCKI),
+ ASPEED_PINCTRL_GROUP(VGABIOS_ROM),
ASPEED_PINCTRL_GROUP(VGAHS),
ASPEED_PINCTRL_GROUP(VGAVS),
ASPEED_PINCTRL_GROUP(VPI18),
@@ -1076,17 +2076,40 @@ static const struct aspeed_pin_group aspeed_g4_groups[] = {
ASPEED_PINCTRL_GROUP(VPI30),
ASPEED_PINCTRL_GROUP(VPO12),
ASPEED_PINCTRL_GROUP(VPO24),
+ ASPEED_PINCTRL_GROUP(WDTRST1),
+ ASPEED_PINCTRL_GROUP(WDTRST2),
};
static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(ACPI),
+ ASPEED_PINCTRL_FUNC(ADC0),
+ ASPEED_PINCTRL_FUNC(ADC1),
+ ASPEED_PINCTRL_FUNC(ADC10),
+ ASPEED_PINCTRL_FUNC(ADC11),
+ ASPEED_PINCTRL_FUNC(ADC12),
+ ASPEED_PINCTRL_FUNC(ADC13),
+ ASPEED_PINCTRL_FUNC(ADC14),
+ ASPEED_PINCTRL_FUNC(ADC15),
+ ASPEED_PINCTRL_FUNC(ADC2),
+ ASPEED_PINCTRL_FUNC(ADC3),
+ ASPEED_PINCTRL_FUNC(ADC4),
+ ASPEED_PINCTRL_FUNC(ADC5),
+ ASPEED_PINCTRL_FUNC(ADC6),
+ ASPEED_PINCTRL_FUNC(ADC7),
+ ASPEED_PINCTRL_FUNC(ADC8),
+ ASPEED_PINCTRL_FUNC(ADC9),
ASPEED_PINCTRL_FUNC(BMCINT),
ASPEED_PINCTRL_FUNC(DDCCLK),
ASPEED_PINCTRL_FUNC(DDCDAT),
+ ASPEED_PINCTRL_FUNC(EXTRST),
ASPEED_PINCTRL_FUNC(FLACK),
ASPEED_PINCTRL_FUNC(FLBUSY),
ASPEED_PINCTRL_FUNC(FLWP),
+ ASPEED_PINCTRL_FUNC(GPID),
ASPEED_PINCTRL_FUNC(GPID0),
+ ASPEED_PINCTRL_FUNC(GPID2),
+ ASPEED_PINCTRL_FUNC(GPID4),
+ ASPEED_PINCTRL_FUNC(GPID6),
ASPEED_PINCTRL_FUNC(GPIE0),
ASPEED_PINCTRL_FUNC(GPIE2),
ASPEED_PINCTRL_FUNC(GPIE4),
@@ -1095,6 +2118,7 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(I2C11),
ASPEED_PINCTRL_FUNC(I2C12),
ASPEED_PINCTRL_FUNC(I2C13),
+ ASPEED_PINCTRL_FUNC(I2C14),
ASPEED_PINCTRL_FUNC(I2C3),
ASPEED_PINCTRL_FUNC(I2C4),
ASPEED_PINCTRL_FUNC(I2C5),
@@ -1104,24 +2128,37 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(I2C9),
ASPEED_PINCTRL_FUNC(LPCPD),
ASPEED_PINCTRL_FUNC(LPCPME),
+ ASPEED_PINCTRL_FUNC(LPCRST),
ASPEED_PINCTRL_FUNC(LPCSMI),
+ ASPEED_PINCTRL_FUNC(MAC1LINK),
+ ASPEED_PINCTRL_FUNC(MAC2LINK),
ASPEED_PINCTRL_FUNC(MDIO1),
ASPEED_PINCTRL_FUNC(MDIO2),
ASPEED_PINCTRL_FUNC(NCTS1),
+ ASPEED_PINCTRL_FUNC(NCTS2),
ASPEED_PINCTRL_FUNC(NCTS3),
ASPEED_PINCTRL_FUNC(NCTS4),
ASPEED_PINCTRL_FUNC(NDCD1),
+ ASPEED_PINCTRL_FUNC(NDCD2),
ASPEED_PINCTRL_FUNC(NDCD3),
ASPEED_PINCTRL_FUNC(NDCD4),
ASPEED_PINCTRL_FUNC(NDSR1),
+ ASPEED_PINCTRL_FUNC(NDSR2),
ASPEED_PINCTRL_FUNC(NDSR3),
+ ASPEED_PINCTRL_FUNC(NDSR4),
ASPEED_PINCTRL_FUNC(NDTR1),
+ ASPEED_PINCTRL_FUNC(NDTR2),
ASPEED_PINCTRL_FUNC(NDTR3),
+ ASPEED_PINCTRL_FUNC(NDTR4),
+ ASPEED_PINCTRL_FUNC(NDTS4),
ASPEED_PINCTRL_FUNC(NRI1),
+ ASPEED_PINCTRL_FUNC(NRI2),
ASPEED_PINCTRL_FUNC(NRI3),
ASPEED_PINCTRL_FUNC(NRI4),
ASPEED_PINCTRL_FUNC(NRTS1),
+ ASPEED_PINCTRL_FUNC(NRTS2),
ASPEED_PINCTRL_FUNC(NRTS3),
+ ASPEED_PINCTRL_FUNC(OSCCLK),
ASPEED_PINCTRL_FUNC(PWM0),
ASPEED_PINCTRL_FUNC(PWM1),
ASPEED_PINCTRL_FUNC(PWM2),
@@ -1131,7 +2168,9 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(PWM6),
ASPEED_PINCTRL_FUNC(PWM7),
ASPEED_PINCTRL_FUNC(RGMII1),
+ ASPEED_PINCTRL_FUNC(RGMII2),
ASPEED_PINCTRL_FUNC(RMII1),
+ ASPEED_PINCTRL_FUNC(RMII2),
ASPEED_PINCTRL_FUNC(ROM16),
ASPEED_PINCTRL_FUNC(ROM8),
ASPEED_PINCTRL_FUNC(ROMCS1),
@@ -1139,21 +2178,48 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(ROMCS3),
ASPEED_PINCTRL_FUNC(ROMCS4),
ASPEED_PINCTRL_FUNC(RXD1),
+ ASPEED_PINCTRL_FUNC(RXD2),
ASPEED_PINCTRL_FUNC(RXD3),
ASPEED_PINCTRL_FUNC(RXD4),
+ ASPEED_PINCTRL_FUNC(SALT1),
+ ASPEED_PINCTRL_FUNC(SALT2),
+ ASPEED_PINCTRL_FUNC(SALT3),
+ ASPEED_PINCTRL_FUNC(SALT4),
ASPEED_PINCTRL_FUNC(SD1),
+ ASPEED_PINCTRL_FUNC(SD2),
+ ASPEED_PINCTRL_FUNC(SGPMCK),
ASPEED_PINCTRL_FUNC(SGPMI),
+ ASPEED_PINCTRL_FUNC(SGPMLD),
+ ASPEED_PINCTRL_FUNC(SGPMO),
+ ASPEED_PINCTRL_FUNC(SGPSCK),
+ ASPEED_PINCTRL_FUNC(SGPSI0),
+ ASPEED_PINCTRL_FUNC(SGPSI1),
+ ASPEED_PINCTRL_FUNC(SGPSLD),
+ ASPEED_PINCTRL_FUNC(SIOONCTRL),
ASPEED_PINCTRL_FUNC(SIOPBI),
ASPEED_PINCTRL_FUNC(SIOPBO),
+ ASPEED_PINCTRL_FUNC(SIOPWREQ),
+ ASPEED_PINCTRL_FUNC(SIOPWRGD),
+ ASPEED_PINCTRL_FUNC(SIOS3),
+ ASPEED_PINCTRL_FUNC(SIOS5),
+ ASPEED_PINCTRL_FUNC(SIOSCI),
+ ASPEED_PINCTRL_FUNC(SPI1),
+ ASPEED_PINCTRL_FUNC(SPI1DEBUG),
+ ASPEED_PINCTRL_FUNC(SPI1PASSTHRU),
+ ASPEED_PINCTRL_FUNC(SPICS1),
ASPEED_PINCTRL_FUNC(TIMER3),
+ ASPEED_PINCTRL_FUNC(TIMER4),
ASPEED_PINCTRL_FUNC(TIMER5),
ASPEED_PINCTRL_FUNC(TIMER6),
ASPEED_PINCTRL_FUNC(TIMER7),
ASPEED_PINCTRL_FUNC(TIMER8),
ASPEED_PINCTRL_FUNC(TXD1),
+ ASPEED_PINCTRL_FUNC(TXD2),
ASPEED_PINCTRL_FUNC(TXD3),
ASPEED_PINCTRL_FUNC(TXD4),
ASPEED_PINCTRL_FUNC(UART6),
+ ASPEED_PINCTRL_FUNC(USBCKI),
+ ASPEED_PINCTRL_FUNC(VGABIOS_ROM),
ASPEED_PINCTRL_FUNC(VGAHS),
ASPEED_PINCTRL_FUNC(VGAVS),
ASPEED_PINCTRL_FUNC(VPI18),
@@ -1161,6 +2227,8 @@ static const struct aspeed_pin_function aspeed_g4_functions[] = {
ASPEED_PINCTRL_FUNC(VPI30),
ASPEED_PINCTRL_FUNC(VPO12),
ASPEED_PINCTRL_FUNC(VPO24),
+ ASPEED_PINCTRL_FUNC(WDTRST1),
+ ASPEED_PINCTRL_FUNC(WDTRST2),
};
static struct aspeed_pinctrl_data aspeed_g4_pinctrl_data = {
--
git-series 0.8.10
^ permalink raw reply related
* [PATCH 6/8] pinctrl: aspeed-g4: Capture SuperIO pinmux dependency
From: Andrew Jeffery @ 2016-09-27 14:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.115463f791b69859c5ce9dafd61a5755ea039f4b.1474986045.git-series.andrew@aj.id.au>
Two LPC-related signals in the AST2400 depend on state in the SuperIO IP
block. Use the recently added infrastructure to capture this
relationship.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 4 ++--
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 2 ++
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
index a21b071ff290..ceb13d4955cb 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
@@ -82,8 +82,8 @@ FUNC_GROUP_DECL(MDIO2, A3, D5);
#define H19 13
#define H19_DESC SIG_DESC_SET(SCU80, 13)
-SIG_EXPR_LIST_DECL_SINGLE(LPCPD, LPCPD, H19_DESC);
-SIG_EXPR_LIST_DECL_SINGLE(LPCSMI, LPCSMI, H19_DESC);
+SIG_EXPR_LIST_DECL_SINGLE(LPCPD, LPCPD, H19_DESC, SIG_DESC_BIT(SIORD30, 1, 0));
+SIG_EXPR_LIST_DECL_SINGLE(LPCSMI, LPCSMI, H19_DESC, SIG_DESC_SET(SIORD30, 1));
MS_PIN_DECL(H19, GPIOB5, LPCPD, LPCSMI);
FUNC_GROUP_DECL(LPCPD, H19);
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
index 4384407d77fb..3a76d2c95584 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
@@ -266,6 +266,8 @@
#define SCUA8 0xA8 /* Multi-function Pin Control #9 */
#define HW_STRAP2 0xD0 /* Strapping */
+#define SIORD30 SIG_DESC_TO_REG(ASPEED_IP_SIO, 0x30)
+
/**
* A signal descriptor, which describes the register, bits and the
* enable/disable values that should be compared or written.
--
git-series 0.8.10
^ permalink raw reply related
* [PATCH 5/8] pinctrl: aspeed: Enable capture of off-SCU pinmux state
From: Andrew Jeffery @ 2016-09-27 14:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.115463f791b69859c5ce9dafd61a5755ea039f4b.1474986045.git-series.andrew@aj.id.au>
The System Control Unit IP in the Aspeed SoCs is typically where the
pinmux configuration is found.
But not always.
On the AST2400 and AST2500 a number of pins depend on state in one of
the SIO, LPC or GFX IP blocks, so add support to at least capture what
that state is. The pinctrl engine for the Aspeed SoCs doesn't try to
inspect or modify the state of the off-SCU IP blocks. Instead, it logs
the state requirement with the expectation that the platform
designer/maintainer arranges for the appropriate configuration to be
applied through the associated drivers.
The IP block of interest is encoded in the reg member of struct
aspeed_sig_desc. For compatibility with the existing code, the SCU is
defined to have an IP value of 0.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 53 +++++++++++++++++++++++---
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 16 +++++++-
2 files changed, 61 insertions(+), 8 deletions(-)
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index 49aeba912531..21ef195d586f 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -14,6 +14,8 @@
#include "../core.h"
#include "pinctrl-aspeed.h"
+const char *const aspeed_pinmux_ips[] = { "SCU", "SIO", "GFX", "LPC" };
+
int aspeed_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
{
struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
@@ -78,7 +80,9 @@ int aspeed_pinmux_get_fn_groups(struct pinctrl_dev *pctldev,
static inline void aspeed_sig_desc_print_val(
const struct aspeed_sig_desc *desc, bool enable, u32 rv)
{
- pr_debug("SCU%x[0x%08x]=0x%x, got 0x%x from 0x%08x\n", desc->reg,
+ pr_debug("Want %s%lX[0x%08X]=0x%X, got 0x%X from 0x%08X\n",
+ aspeed_pinmux_ips[SIG_DESC_IP_FROM_REG(desc->reg)],
+ SIG_DESC_OFFSET_FROM_REG(desc->reg),
desc->mask, enable ? desc->enable : desc->disable,
(rv & desc->mask) >> __ffs(desc->mask), rv);
}
@@ -105,6 +109,8 @@ static bool aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc,
unsigned int raw;
u32 want;
+ WARN_ON(SIG_DESC_IP_FROM_REG(desc->reg) != ASPEED_IP_SCU);
+
if (regmap_read(map, desc->reg, &raw) < 0)
return false;
@@ -142,9 +148,19 @@ static bool aspeed_sig_expr_eval(const struct aspeed_sig_expr *expr,
for (i = 0; i < expr->ndescs; i++) {
const struct aspeed_sig_desc *desc = &expr->descs[i];
+ size_t ip = SIG_DESC_IP_FROM_REG(desc->reg);
+
+ if (ip == ASPEED_IP_SCU) {
+ if (!aspeed_sig_desc_eval(desc, enabled, map))
+ return false;
+ } else {
+ size_t offset = SIG_DESC_OFFSET_FROM_REG(desc->reg);
+ const char *ip_name = aspeed_pinmux_ips[ip];
+
+ pr_debug("Ignoring configuration of field %s%X[0x%08X]\n",
+ ip_name, offset, desc->mask);
+ }
- if (!aspeed_sig_desc_eval(desc, enabled, map))
- return false;
}
return true;
@@ -170,7 +186,14 @@ static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
for (i = 0; i < expr->ndescs; i++) {
bool ret;
const struct aspeed_sig_desc *desc = &expr->descs[i];
+
+ size_t offset = SIG_DESC_OFFSET_FROM_REG(desc->reg);
+ size_t ip = SIG_DESC_IP_FROM_REG(desc->reg);
+ bool is_scu = (ip == ASPEED_IP_SCU);
+ const char *ip_name = aspeed_pinmux_ips[ip];
+
u32 pattern = enable ? desc->enable : desc->disable;
+ u32 val = (pattern << __ffs(desc->mask));
/*
* Strap registers are configured in hardware or by early-boot
@@ -179,11 +202,27 @@ static bool aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
* deconfigured and is the reason we re-evaluate after writing
* all descriptor bits.
*/
- if (desc->reg == HW_STRAP1 || desc->reg == HW_STRAP2)
+ if (is_scu && (offset == HW_STRAP1 || offset == HW_STRAP2))
continue;
- ret = regmap_update_bits(map, desc->reg, desc->mask,
- pattern << __ffs(desc->mask)) == 0;
+ /*
+ * Sometimes we need help from IP outside the SCU to activate a
+ * mux request. Report that we need its cooperation.
+ */
+ if (enable && !is_scu) {
+ pr_debug("Pinmux request for %s requires cooperation of %s IP: Need (%s%X[0x%08X] = 0x%08X\n",
+ expr->function, ip_name, ip_name, offset,
+ desc->mask, val);
+ }
+
+ /* And only read/write SCU registers */
+ if (!is_scu) {
+ pr_debug("Skipping configuration of field %s%X[0x%08X]\n",
+ ip_name, offset, desc->mask);
+ continue;
+ }
+
+ ret = regmap_update_bits(map, desc->reg, desc->mask, val) == 0;
if (!ret)
return ret;
@@ -343,6 +382,8 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
const struct aspeed_sig_expr **funcs;
const struct aspeed_sig_expr ***prios;
+ pr_debug("Muxing pin %d for %s\n", pin, pfunc->name);
+
if (!pdesc)
return -EINVAL;
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
index 3e72ef8c54bf..4384407d77fb 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
@@ -232,6 +232,15 @@
* group.
*/
+#define ASPEED_IP_SCU 0
+#define ASPEED_IP_SIO 1
+#define ASPEED_IP_GFX 2
+#define ASPEED_IP_LPC 3
+
+#define SIG_DESC_TO_REG(ip, offset) (((ip) << 24) | (offset))
+#define SIG_DESC_IP_FROM_REG(reg) (((reg) >> 24) & GENMASK(7, 0))
+#define SIG_DESC_OFFSET_FROM_REG(reg) ((reg) & GENMASK(11, 0))
+
/*
* The "Multi-function Pins Mapping and Control" table in the SoC datasheet
* references registers by the device/offset mnemonic. The register macros
@@ -261,7 +270,10 @@
* A signal descriptor, which describes the register, bits and the
* enable/disable values that should be compared or written.
*
- * @reg: The register offset from base in bytes
+ * @reg: Split into three fields:
+ * 31:24: IP selector
+ * 23:12: Reserved
+ * 11:0: Register offset
* @mask: The mask to apply to the register. The lowest set bit of the mask is
* used to derive the shift value.
* @enable: The value that enables the function. Value should be in the LSBs,
@@ -270,7 +282,7 @@
* LSBs, not at the position of the mask.
*/
struct aspeed_sig_desc {
- unsigned int reg;
+ u32 reg;
u32 mask;
u32 enable;
u32 disable;
--
git-series 0.8.10
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox