* [PATCH 2/9] pinctrl: sunxi: Add bindings define
From: Maxime Ripard @ 2016-10-03 10:21 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.26c6f76b361d146fb079d744251f020ef6d2db7d.1475489558.git-series.maxime.ripard@free-electrons.com>
Since we have some bindings header for our hardcoded flags, let's use them
when we can.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 64f7f6dcc027..5be455d5e252 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -28,6 +28,8 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
#include "../core.h"
#include "../../gpio/gpiolib.h"
#include "pinctrl-sunxi.h"
@@ -164,9 +166,9 @@ static int sunxi_pctrl_parse_bias_prop(struct device_node *node)
return -EINVAL;
switch (val) {
- case 1:
+ case SUN4I_PINCTRL_PULL_UP:
return PIN_CONFIG_BIAS_PULL_UP;
- case 2:
+ case SUN4I_PINCTRL_PULL_DOWN:
return PIN_CONFIG_BIAS_PULL_DOWN;
}
--
git-series 0.8.10
^ permalink raw reply related
* [PATCH 1/9] pinctrl: sunxi: Rework the pin config building code
From: Maxime Ripard @ 2016-10-03 10:20 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.26c6f76b361d146fb079d744251f020ef6d2db7d.1475489558.git-series.maxime.ripard@free-electrons.com>
In order to support more easily the generic pinctrl properties, rework the
pinctrl maps configuration and split it into several sub-functions.
One of the side-effects from that rework is that we only parse the pin
configuration once, since it's going to be common to every pin, instead of
having to parsing once for each pin.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 178 +++++++++++++++++++--------
1 file changed, 130 insertions(+), 48 deletions(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 54455af566ec..64f7f6dcc027 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -146,6 +146,110 @@ static int sunxi_pctrl_get_group_pins(struct pinctrl_dev *pctldev,
return 0;
}
+static bool sunxi_pctrl_has_bias_prop(struct device_node *node)
+{
+ return of_find_property(node, "allwinner,pull", NULL);
+}
+
+static bool sunxi_pctrl_has_drive_prop(struct device_node *node)
+{
+ return of_find_property(node, "allwinner,drive", NULL);
+}
+
+static int sunxi_pctrl_parse_bias_prop(struct device_node *node)
+{
+ u32 val;
+
+ if (of_property_read_u32(node, "allwinner,pull", &val))
+ return -EINVAL;
+
+ switch (val) {
+ case 1:
+ return PIN_CONFIG_BIAS_PULL_UP;
+ case 2:
+ return PIN_CONFIG_BIAS_PULL_DOWN;
+ }
+
+ return -EINVAL;
+}
+
+static int sunxi_pctrl_parse_drive_prop(struct device_node *node)
+{
+ u32 val;
+
+ if (of_property_read_u32(node, "allwinner,drive", &val))
+ return -EINVAL;
+
+ return (val + 1) * 10;
+}
+
+static const char *sunxi_pctrl_parse_function_prop(struct device_node *node)
+{
+ const char *function;
+ int ret;
+
+ ret = of_property_read_string(node, "allwinner,function", &function);
+ if (!ret)
+ return function;
+
+ return NULL;
+}
+
+static const char *sunxi_pctrl_find_pins_prop(struct device_node *node,
+ int *npins)
+{
+ int count;
+
+ count = of_property_count_strings(node, "allwinner,pins");
+ if (count > 0) {
+ *npins = count;
+ return "allwinner,pins";
+ }
+
+ return NULL;
+}
+
+static unsigned long *sunxi_pctrl_build_pin_config(struct device_node *node,
+ unsigned int *len)
+{
+ unsigned long *pinconfig;
+ unsigned int configlen = 0, idx = 0;
+
+ if (sunxi_pctrl_has_drive_prop(node))
+ configlen++;
+ if (sunxi_pctrl_has_bias_prop(node))
+ configlen++;
+
+ pinconfig = kzalloc(configlen * sizeof(*pinconfig), GFP_KERNEL);
+ if (!pinconfig)
+ return NULL;
+
+ if (sunxi_pctrl_has_drive_prop(node)) {
+ int drive = sunxi_pctrl_parse_drive_prop(node);
+ if (drive < 0)
+ goto err_free;
+
+ pinconfig[idx++] = pinconf_to_config_packed(PIN_CONFIG_DRIVE_STRENGTH,
+ drive);
+ }
+
+ if (sunxi_pctrl_has_bias_prop(node)) {
+ int pull = sunxi_pctrl_parse_bias_prop(node);
+ if (pull < 0)
+ goto err_free;
+
+ pinconfig[idx++] = pinconf_to_config_packed(pull, 0);
+ }
+
+
+ *len = configlen;
+ return pinconfig;
+
+err_free:
+ kfree(pinconfig);
+ return NULL;
+}
+
static int sunxi_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *node,
struct pinctrl_map **map,
@@ -154,38 +258,45 @@ static int sunxi_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
unsigned long *pinconfig;
struct property *prop;
- const char *function;
+ const char *function, *pin_prop;
const char *group;
- int ret, nmaps, i = 0;
- u32 val;
+ int ret, npins, nmaps, configlen = 0, i = 0;
*map = NULL;
*num_maps = 0;
- ret = of_property_read_string(node, "allwinner,function", &function);
- if (ret) {
- dev_err(pctl->dev,
- "missing allwinner,function property in node %s\n",
+ function = sunxi_pctrl_parse_function_prop(node);
+ if (!function) {
+ dev_err(pctl->dev, "missing function property in node %s\n",
node->name);
return -EINVAL;
}
- nmaps = of_property_count_strings(node, "allwinner,pins") * 2;
- if (nmaps < 0) {
- dev_err(pctl->dev,
- "missing allwinner,pins property in node %s\n",
+ pin_prop = sunxi_pctrl_find_pins_prop(node, &npins);
+ if (!pin_prop) {
+ dev_err(pctl->dev, "missing pins property in node %s\n",
node->name);
return -EINVAL;
}
+ /*
+ * We have two maps for each pin: one for the function, one
+ * for the configuration (bias, strength, etc)
+ */
+ nmaps = npins * 2;
*map = kmalloc(nmaps * sizeof(struct pinctrl_map), GFP_KERNEL);
if (!*map)
return -ENOMEM;
- of_property_for_each_string(node, "allwinner,pins", prop, group) {
+ pinconfig = sunxi_pctrl_build_pin_config(node, &configlen);
+ if (!pinconfig) {
+ ret = -EINVAL;
+ goto err_free_map;
+ }
+
+ of_property_for_each_string(node, pin_prop, prop, group) {
struct sunxi_pinctrl_group *grp =
sunxi_pinctrl_find_group_by_name(pctl, group);
- int j = 0, configlen = 0;
if (!grp) {
dev_err(pctl->dev, "unknown pin %s", group);
@@ -208,34 +319,6 @@ static int sunxi_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
(*map)[i].type = PIN_MAP_TYPE_CONFIGS_GROUP;
(*map)[i].data.configs.group_or_pin = group;
-
- if (of_find_property(node, "allwinner,drive", NULL))
- configlen++;
- if (of_find_property(node, "allwinner,pull", NULL))
- configlen++;
-
- pinconfig = kzalloc(configlen * sizeof(*pinconfig), GFP_KERNEL);
- if (!pinconfig) {
- kfree(*map);
- return -ENOMEM;
- }
-
- if (!of_property_read_u32(node, "allwinner,drive", &val)) {
- u16 strength = (val + 1) * 10;
- pinconfig[j++] =
- pinconf_to_config_packed(PIN_CONFIG_DRIVE_STRENGTH,
- strength);
- }
-
- if (!of_property_read_u32(node, "allwinner,pull", &val)) {
- enum pin_config_param pull = PIN_CONFIG_END;
- if (val == 1)
- pull = PIN_CONFIG_BIAS_PULL_UP;
- else if (val == 2)
- pull = PIN_CONFIG_BIAS_PULL_DOWN;
- pinconfig[j++] = pinconf_to_config_packed(pull, 0);
- }
-
(*map)[i].data.configs.configs = pinconfig;
(*map)[i].data.configs.num_configs = configlen;
@@ -245,19 +328,18 @@ static int sunxi_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
*num_maps = nmaps;
return 0;
+
+err_free_map:
+ kfree(map);
+ return ret;
}
static void sunxi_pctrl_dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *map,
unsigned num_maps)
{
- int i;
-
- for (i = 0; i < num_maps; i++) {
- if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
- kfree(map[i].data.configs.configs);
- }
-
+ /* All the maps have the same pin config, free only the first one */
+ kfree(map[0].data.configs.configs);
kfree(map);
}
--
git-series 0.8.10
^ permalink raw reply related
* [PATCH 0/9] pinctrl: sunxi: Generic bindings rework
From: Maxime Ripard @ 2016-10-03 10:20 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
This patch set reworks the Allwinner pinctrl driver to support the generic
pin configuration and multiplexing bindings.
In the process, we also covered some lasting issues that were found: we
were ignoring the case where no pull-up was set, and while our binding was
saying that the allwinner,drive and allwinner,pull properties were
optional, the code was not able to deal with the case where they were not
present.
Maxime Ripard (9):
pinctrl: sunxi: Rework the pin config building code
pinctrl: sunxi: Add bindings define
pinctrl: sunxi: Handle bias disable
pinctrl: sunxi: Deal with configless pins
pinctrl: sunxi: Support generic binding
dt-bindings: pinctrl: Deprecate sunxi pinctrl bindings
ARM: sunxi: Remove useless allwinner,drive property
ARM: sunxi: Remove useless allwinner,pull property
ARM: sunxi: Convert pinctrl nodes to generic bindings
Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 5 +-
arch/arm/boot/dts/ntc-gr8-evb.dts | 24 ++----
arch/arm/boot/dts/ntc-gr8.dtsi | 104 +++++++++------------------
arch/arm/boot/dts/sun4i-a10-a1000.dts | 12 +--
arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts | 14 +---
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 14 +---
arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts | 38 +++-------
arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 6 +--
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 12 +--
arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts | 16 +---
arch/arm/boot/dts/sun4i-a10-inet1.dts | 26 ++-----
arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 14 +---
arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts | 29 +++-----
arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts | 12 +--
arch/arm/boot/dts/sun4i-a10-marsboard.dts | 13 +--
arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-mk802.dts | 18 +----
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 27 ++-----
arch/arm/boot/dts/sun4i-a10-pcduino.dts | 19 +----
arch/arm/boot/dts/sun4i-a10-pcduino2.dts | 6 +--
arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts | 32 +++-----
arch/arm/boot/dts/sun4i-a10.dtsi | 169 +++++++++++++++-----------------------------
arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts | 18 ++---
arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts | 29 +++-----
arch/arm/boot/dts/sun5i-a10s-mk802.dts | 19 +----
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 36 +++------
arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts | 20 ++---
arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 21 +----
arch/arm/boot/dts/sun5i-a10s.dtsi | 61 ++++++----------
arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts | 23 ++----
arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | 22 ++----
arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 40 ++++------
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 36 +++------
arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 17 +---
arch/arm/boot/dts/sun5i-a13.dtsi | 24 ++----
arch/arm/boot/dts/sun5i-r8-chip.dts | 12 +--
arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi | 33 +++------
arch/arm/boot/dts/sun5i.dtsi | 57 +++++----------
arch/arm/boot/dts/sun6i-a31-app4-evb1.dts | 6 +--
arch/arm/boot/dts/sun6i-a31-colombus.dts | 22 ++----
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 23 ++----
arch/arm/boot/dts/sun6i-a31-i7.dts | 19 +----
arch/arm/boot/dts/sun6i-a31-m9.dts | 19 +----
arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts | 19 +----
arch/arm/boot/dts/sun6i-a31.dtsi | 136 ++++++++++++++---------------------
arch/arm/boot/dts/sun6i-a31s-primo81.dts | 20 ++---
arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 13 +--
arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 29 +++-----
arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts | 9 +--
arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi | 14 +---
arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 27 ++-----
arch/arm/boot/dts/sun7i-a20-bananapi.dts | 26 ++-----
arch/arm/boot/dts/sun7i-a20-bananapro.dts | 37 +++-------
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 13 +--
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 38 +++-------
arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 24 ++----
arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 26 ++-----
arch/arm/boot/dts/sun7i-a20-itead-ibox.dts | 7 +--
arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 30 +++-----
arch/arm/boot/dts/sun7i-a20-m3.dts | 6 +--
arch/arm/boot/dts/sun7i-a20-mk808c.dts | 12 +--
arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 32 +++-----
arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 27 ++-----
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts | 6 +--
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 33 +++------
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 28 +++----
arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts | 45 ++++--------
arch/arm/boot/dts/sun7i-a20-orangepi.dts | 38 +++-------
arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 25 ++----
arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 21 +----
arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 25 ++----
arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 13 +--
arch/arm/boot/dts/sun7i-a20.dtsi | 277 ++++++++++++++++++++++++++----------------------------------------------
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 95 ++++++++++---------------
arch/arm/boot/dts/sun8i-a23-evb.dts | 7 +--
arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts | 8 +--
arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts | 8 +--
arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts | 9 +--
arch/arm/boot/dts/sun8i-a33-olinuxino.dts | 18 +----
arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 11 +--
arch/arm/boot/dts/sun8i-a33.dtsi | 6 +--
arch/arm/boot/dts/sun8i-a83t.dtsi | 21 +----
arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 18 +----
arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts | 12 +--
arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 26 ++-----
arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts | 18 +----
arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 18 +----
arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts | 4 +-
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 18 +----
arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 10 +--
arch/arm/boot/dts/sun8i-h3.dtsi | 92 +++++++++---------------
arch/arm/boot/dts/sun8i-q8-common.dtsi | 9 +--
arch/arm/boot/dts/sun8i-r16-parrot.dts | 36 +++------
arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi | 26 ++-----
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 15 +---
arch/arm/boot/dts/sun9i-a80-optimus.dts | 33 +++------
arch/arm/boot/dts/sun9i-a80.dtsi | 54 +++++---------
arch/arm/boot/dts/sunxi-common-regulators.dtsi | 24 ++----
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 260 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------
100 files changed, 1290 insertions(+), 1793 deletions(-)
--
git-series 0.8.10
^ permalink raw reply
* [PATCH] ARM: dts: rockchip: Reserve unusable memory region on rk3066
From: Mark Rutland @ 2016-10-03 10:20 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <6962779.A926KxJite@phil>
On Sat, Oct 01, 2016 at 09:18:15PM +0200, Heiko Stuebner wrote:
> Am Samstag, 1. Oktober 2016, 19:17:11 CEST schrieb Mark Rutland:
> > On Sat, Oct 01, 2016 at 04:09:39PM +0200, =?UTF-8?q?Pawe=C5=82=20Jarosz?=
> wrote:
> > > For some reason accessing memory region above 0xfe000000 freezes
> > > system on rk3066. There is similiar bug on later rockchip soc (rk3288)
> > > solved same way.
[...]
> > > + reserved-memory {
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + ranges;
> > > + /*
> > > + * The rk3066 cannot use the memory area above 0x9F000000
> > > + * for some unknown reason.
> > > + */
> > > + unusable at 9F000000 {
> > > + reg = <0x9F000000 0x1000000>;
> > > + };
> >
> > I don't think this is a sane workaround, but it is at best difficult to
> > tell, given there's no reason given for why this memory is unusable.
> >
> > For instance, if bus accesses to this address hang, then this patch only
> > makes the hand less likely, since the kernel will still map the region (and
> > therefore the CPU can perform speculative accesses).
> >
> > Are issues with this memory consistently seen in practice?
> >
> > Can you enable CONFIG_MEMTEST and pass 'memtest' to the kernel, to determine
> > if the memory is returning erroneous values?
>
> just for the sake of completeness, on the rk3288 the issue was the dma not
> being able to access the specific memory region (interestingly also the last
> 16MB but of the 4GB area supported on the rk3288). So memory itself was ok,
> just dma access to it failed.
How odd.
> We didn't find any other sane solution to limit the dma access in a general way
> at the time, so opted for just blocking the memory region (as it was similarly
> only
I was under the impression that dma-ranges could describe this kind of
DMA addressing limitation. Was there some problem with that? Perhaps the
driver is not acquiring/configuring its mask correctly?
Thanks,
Mark.
^ permalink raw reply
* [RESEND PATCH] ARM: dts: pxa2xx: Specify all interrupts for the GPIO controller.
From: Vijay Kumar B @ 2016-10-03 10:18 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1475489412-9758-1-git-send-email-vijaykumar@zilogic.com>
The PXA GPIO controller has 3 interrupt outputs, this needs to be
indicated in the DTS file. Without this mainstone's CPLD interrupt 0
will not be raised to the processor.
Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
---
arch/arm/boot/dts/pxa2xx.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index 5e5af07..9ca2e5b 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -54,8 +54,8 @@
reg = <0x40e00000 0x10000>;
gpio-controller;
#gpio-cells = <0x2>;
- interrupts = <10>;
- interrupt-names = "gpio_mux";
+ interrupts = <8 9 10>;
+ interrupt-names = "gpio0", "gpio1", "gpio_mux";
interrupt-controller;
#interrupt-cells = <0x2>;
ranges;
--
2.1.4
^ permalink raw reply related
* [PATCH] Specify all interrupts for the GPIO controller.
From: Vijay Kumar B @ 2016-10-03 10:10 UTC (permalink / raw)
To: linux-arm-kernel
The PXA GPIO controller has 3 interrupt outputs, this needs to be
indicated in the DTS file. Without this mainstone's CPLD interrupt 0
will not be raised to the processor.
Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
---
arch/arm/boot/dts/pxa2xx.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index 5e5af07..9ca2e5b 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -54,8 +54,8 @@
reg = <0x40e00000 0x10000>;
gpio-controller;
#gpio-cells = <0x2>;
- interrupts = <10>;
- interrupt-names = "gpio_mux";
+ interrupts = <8 9 10>;
+ interrupt-names = "gpio0", "gpio1", "gpio_mux";
interrupt-controller;
#interrupt-cells = <0x2>;
ranges;
--
2.1.4
^ permalink raw reply related
* [RFC 05/11] iommu/dma: iommu_dma_(un)map_mixed
From: Auger Eric @ 2016-10-03 9:38 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1b1b30b3-4199-9e18-362c-b8bc9d45277d@arm.com>
Hi Robin,
On 30/09/2016 15:24, Robin Murphy wrote:
> Hi Eric,
>
> On 27/09/16 21:48, Eric Auger wrote:
>> iommu_dma_map_mixed and iommu_dma_unmap_mixed operate on
>> IOMMU_DOMAIN_MIXED typed domains. On top of standard iommu_map/unmap
>> they reserve the IOVA window to prevent the iova allocator to
>> allocate in those areas.
>>
>> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>> ---
>> drivers/iommu/dma-iommu.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
>> include/linux/dma-iommu.h | 18 ++++++++++++++++++
>> 2 files changed, 66 insertions(+)
>>
>> diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
>> index 04bbc85..db21143 100644
>> --- a/drivers/iommu/dma-iommu.c
>> +++ b/drivers/iommu/dma-iommu.c
>> @@ -759,3 +759,51 @@ int iommu_get_dma_msi_region_cookie(struct iommu_domain *domain,
>> return 0;
>> }
>> EXPORT_SYMBOL(iommu_get_dma_msi_region_cookie);
>> +
>> +int iommu_dma_map_mixed(struct iommu_domain *domain, unsigned long iova,
>> + phys_addr_t paddr, size_t size, int prot)
>> +{
>> + struct iova_domain *iovad;
>> + unsigned long lo, hi;
>> + int ret;
>> +
>> + if (domain->type != IOMMU_DOMAIN_MIXED)
>> + return -EINVAL;
>> +
>> + if (!domain->iova_cookie)
>> + return -EINVAL;
>> +
>> + iovad = cookie_iovad(domain);
>> +
>> + lo = iova_pfn(iovad, iova);
>> + hi = iova_pfn(iovad, iova + size - 1);
>> + reserve_iova(iovad, lo, hi);
>
> This can't work reliably - reserve_iova() will (for good reason) merge
> any adjacent or overlapping entries, so any unmap is liable to free more
> IOVA space than actually gets unmapped, and things will get subtly out
> of sync and go wrong later.
OK. I did not notice that.
>
> The more general issue with this whole approach, though, is that it
> effectively rules out userspace doing guest memory hotplug or similar,
> and I'm not we want to paint ourselves into that corner. Basically, as
> soon as a device is attached to a guest, the entirety of the unallocated
> IPA space becomes reserved, and userspace can never add anything further
> to it, because any given address *might* be in use for an MSI mapping.
I fully agree. My bad, I mixed up about how/when the PCI MMIO space was
iommu mapped. So we don't have any other solution than having the guest
providing unused and non reserved GPA. Back to the original approach then.
>
> I think it still makes most sense to stick with the original approach of
> cooperating with userspace to reserve a bounded area - it's just that we
> can then let automatic mapping take care of itself within that area.
OK will respin asap.
>
> Speaking of which, I've realised the same fundamental reservation
> problem already applies to PCI without ACS, regardless of MSIs. I just
> tried on my Juno with guest memory placed at 0x4000000000, (i.e.
> matching the host PA of the 64-bit PCI window), and sure enough when the
> guest kicks off some DMA on the passed-through NIC, the root complex
> interprets the guest IPA as (unsupported) peer-to-peer DMA to a BAR
> claimed by the video card, and it fails. I guess this doesn't get hit in
> practice on x86 because the guest memory map is unlikely to be much
> different from the host's.
>
> It seems like we basically need a general way of communicating fixed and
> movable host reservations to userspace :/
Yes I saw "iommu/dma: Avoid PCI host bridge windows". Well this looks
like a generalisation of the MSI geometry issue (they also face this one
on x86 with a non x86 guest). This will also hit the fact that on QEMU
the ARM guest memory map is static.
Thank you for your time
Best Regards
Eric
>
> Robin.
>
>> + ret = iommu_map(domain, iova, paddr, size, prot);
>> + if (ret)
>> + free_iova(iovad, lo);
>> + return ret;
>> +}
>> +EXPORT_SYMBOL(iommu_dma_map_mixed);
>> +
>> +size_t iommu_dma_unmap_mixed(struct iommu_domain *domain, unsigned long iova,
>> + size_t size)
>> +{
>> + struct iova_domain *iovad;
>> + unsigned long lo;
>> + size_t ret;
>> +
>> + if (domain->type != IOMMU_DOMAIN_MIXED)
>> + return -EINVAL;
>> +
>> + if (!domain->iova_cookie)
>> + return -EINVAL;
>> +
>> + iovad = cookie_iovad(domain);
>> + lo = iova_pfn(iovad, iova);
>> +
>> + ret = iommu_unmap(domain, iova, size);
>> + if (ret == size)
>> + free_iova(iovad, lo);
>> + return ret;
>> +}
>> +EXPORT_SYMBOL(iommu_dma_unmap_mixed);
>> diff --git a/include/linux/dma-iommu.h b/include/linux/dma-iommu.h
>> index 1c55413..f2aa855 100644
>> --- a/include/linux/dma-iommu.h
>> +++ b/include/linux/dma-iommu.h
>> @@ -70,6 +70,12 @@ void iommu_dma_map_msi_msg(int irq, struct msi_msg *msg);
>> int iommu_get_dma_msi_region_cookie(struct iommu_domain *domain,
>> dma_addr_t base, u64 size);
>>
>> +int iommu_dma_map_mixed(struct iommu_domain *domain, unsigned long iova,
>> + phys_addr_t paddr, size_t size, int prot);
>> +
>> +size_t iommu_dma_unmap_mixed(struct iommu_domain *domain, unsigned long iova,
>> + size_t size);
>> +
>> #else
>>
>> struct iommu_domain;
>> @@ -99,6 +105,18 @@ static inline int iommu_get_dma_msi_region_cookie(struct iommu_domain *domain,
>> return -ENODEV;
>> }
>>
>> +int iommu_dma_map_mixed(struct iommu_domain *domain, unsigned long iova,
>> + phys_addr_t paddr, size_t size, int prot)
>> +{
>> + return -ENODEV;
>> +}
>> +
>> +size_t iommu_dma_unmap_mixed(struct iommu_domain *domain, unsigned long iova,
>> + size_t size)
>> +{
>> + return -ENODEV;
>> +}
>> +
>> #endif /* CONFIG_IOMMU_DMA */
>> #endif /* __KERNEL__ */
>> #endif /* __DMA_IOMMU_H */
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply
* [PATCH] drm/mediatek: fix a typo
From: Matthias Brugger @ 2016-10-03 8:46 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1475205119.13345.6.camel@mtksdaap41>
On 30/09/16 05:11, Bibby Hsieh wrote:
> On Thu, 2016-09-29 at 10:46 +0200, Matthias Brugger wrote:
>>
>> On 29/09/16 06:01, CK Hu wrote:
>>> Acked-by: CK Hu <ck.hu@mediatek.com>
>>>
>>> On Thu, 2016-09-29 at 11:22 +0800, Bibby Hsieh wrote:
>>>> Fix the typo: OD_RELAYMODE->OD_CFG
>>>>
>>
>
> Hi, Matthias
> Thanks for your reply.
>
>> Although it is quite clear what the patch does, could you write one
>> sentence to explain what it does. Maybe explain even which effect it
>> has, which error get fixed etc.
>
> Ok, I will do that.
>
>> As we are getting public available boards now, we should take more care
>> about fixes. If you have a fix for a commit introduced in an earlier
>> version of linux and it should be fixed for this version as well (e.g.
>> v4.6 does have the feature but it does not work correctly) then please
>> add these two lines before your Signed-off-by:
>> Fixes: <commit-hash> ("<commit subject line>")
>> Cc: stable at vger.kernel.org # v4.6+
>>
>> Where v4.6+ stands for the oldest version where this should get fixed.
>>
>
> Ok, but the patch hasn't been merged into v4.8 (just in drm-next [1] and
> linux-next [2]), how can I mark that?
>
If the commit get's into v4.9 then make sure that this patch get's
merged into the fixes for v4.9 by the corresponding maintainer.
Regards,
Matthias
> [1]
> https://cgit.freedesktop.org/~airlied/linux/commit/?h=drm-next&id=7216436420414144646f5d8343d061355fd23483
> [2]
> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/?id=7216436420414144646f5d8343d061355fd23483
>
>
>> Thanks a lot,
>> Matthias
>>
>>>> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
>>>> ---
>>>> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +-
>>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
>>>> index df33b3c..aa5f20f 100644
>>>> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
>>>> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
>>>> @@ -123,7 +123,7 @@ static void mtk_od_config(struct mtk_ddp_comp *comp, unsigned int w,
>>>> unsigned int bpc)
>>>> {
>>>> writel(w << 16 | h, comp->regs + DISP_OD_SIZE);
>>>> - writel(OD_RELAYMODE, comp->regs + OD_RELAYMODE);
>>>> + writel(OD_RELAYMODE, comp->regs + OD_CFG);
>>>> mtk_dither_set(comp, bpc, DISP_OD_CFG);
>>>> }
>>>>
>>>
>>>
>
^ permalink raw reply
* [PATCH v3 9/9] arm64: dts: add Pine64 support
From: Maxime Ripard @ 2016-10-03 8:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161003080913.24197-1-maxime.ripard@free-electrons.com>
From: Andre Przywara <andre.przywara@arm.com>
The Pine64 is a cost-efficient development board based on the
Allwinner A64 SoC.
There are three models: the basic version with Fast Ethernet and
512 MB of DRAM (Pine64) and two Pine64+ versions, which both
feature Gigabit Ethernet and additional connectors for touchscreens
and a camera. Or as my son put it: "Those are smaller and these are
missing." ;-)
The two Pine64+ models just differ in the amount of DRAM
(1GB vs. 2GB). Since U-Boot will figure out the right size for us and
patches the DT accordingly we just need to provide one DT for the
Pine64+.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
[Maxime: Removed the common DTSI and include directly the pine64 DTS]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/allwinner/Makefile | 5 ++
.../boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 50 +++++++++++
.../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 74 +++++++++++++++++
include/dt-bindings/reset/sun50i-a64-ccu.h | 97 +++++++++++-----------
5 files changed, 179 insertions(+), 48 deletions(-)
create mode 100644 arch/arm64/boot/dts/allwinner/Makefile
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 6e199c903676..ddcbf5a2c17e 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,4 +1,5 @@
dts-dirs += al
+dts-dirs += allwinner
dts-dirs += altera
dts-dirs += amd
dts-dirs += amlogic
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
new file mode 100644
index 000000000000..1e29a5ae8282
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
new file mode 100644
index 000000000000..790d14daaa6a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun50i-a64-pine64.dts"
+
+/ {
+ model = "Pine64+";
+ compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
+
+ /* TODO: Camera, Ethernet PHY, touchscreen, etc. */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
new file mode 100644
index 000000000000..9f127b3d0e33
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+/ {
+ model = "Pine64";
+ compatible = "pine64,pine64", "allwinner,sun50i-a64";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
+
+&i2c1_pins {
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
diff --git a/include/dt-bindings/reset/sun50i-a64-ccu.h b/include/dt-bindings/reset/sun50i-a64-ccu.h
index e61fac294d73..db60b29ddb11 100644
--- a/include/dt-bindings/reset/sun50i-a64-ccu.h
+++ b/include/dt-bindings/reset/sun50i-a64-ccu.h
@@ -46,52 +46,53 @@
#define RST_USB_PHY0 0
#define RST_USB_PHY1 1
#define RST_USB_HSIC 2
-#define RST_MBUS 3
-#define RST_BUS_MIPI_DSI 4
-#define RST_BUS_CE 5
-#define RST_BUS_DMA 6
-#define RST_BUS_MMC0 7
-#define RST_BUS_MMC1 8
-#define RST_BUS_MMC2 9
-#define RST_BUS_NAND 10
-#define RST_BUS_DRAM 11
-#define RST_BUS_EMAC 12
-#define RST_BUS_TS 13
-#define RST_BUS_HSTIMER 14
-#define RST_BUS_SPI0 15
-#define RST_BUS_SPI1 16
-#define RST_BUS_OTG 17
-#define RST_BUS_EHCI0 18
-#define RST_BUS_EHCI1 19
-#define RST_BUS_OHCI0 20
-#define RST_BUS_OHCI1 21
-#define RST_BUS_VE 22
-#define RST_BUS_TCON0 23
-#define RST_BUS_TCON1 24
-#define RST_BUS_DEINTERLACE 25
-#define RST_BUS_CSI 26
-#define RST_BUS_HDMI0 27
-#define RST_BUS_HDMI1 28
-#define RST_BUS_DE 29
-#define RST_BUS_GPU 30
-#define RST_BUS_MSGBOX 31
-#define RST_BUS_SPINLOCK 32
-#define RST_BUS_DBG 33
-#define RST_BUS_LVDS 34
-#define RST_BUS_CODEC 35
-#define RST_BUS_SPDIF 36
-#define RST_BUS_THS 37
-#define RST_BUS_I2S0 38
-#define RST_BUS_I2S1 39
-#define RST_BUS_I2S2 40
-#define RST_BUS_I2C0 41
-#define RST_BUS_I2C1 42
-#define RST_BUS_I2C2 43
-#define RST_BUS_SCR 44
-#define RST_BUS_UART0 45
-#define RST_BUS_UART1 46
-#define RST_BUS_UART2 47
-#define RST_BUS_UART3 48
-#define RST_BUS_UART4 49
+#define RST_DRAM 3
+#define RST_MBUS 4
+#define RST_BUS_MIPI_DSI 5
+#define RST_BUS_CE 6
+#define RST_BUS_DMA 7
+#define RST_BUS_MMC0 8
+#define RST_BUS_MMC1 9
+#define RST_BUS_MMC2 10
+#define RST_BUS_NAND 11
+#define RST_BUS_DRAM 12
+#define RST_BUS_EMAC 13
+#define RST_BUS_TS 14
+#define RST_BUS_HSTIMER 15
+#define RST_BUS_SPI0 16
+#define RST_BUS_SPI1 17
+#define RST_BUS_OTG 18
+#define RST_BUS_EHCI0 19
+#define RST_BUS_EHCI1 20
+#define RST_BUS_OHCI0 21
+#define RST_BUS_OHCI1 22
+#define RST_BUS_VE 23
+#define RST_BUS_TCON0 24
+#define RST_BUS_TCON1 25
+#define RST_BUS_DEINTERLACE 26
+#define RST_BUS_CSI 27
+#define RST_BUS_HDMI0 28
+#define RST_BUS_HDMI1 29
+#define RST_BUS_DE 30
+#define RST_BUS_GPU 31
+#define RST_BUS_MSGBOX 32
+#define RST_BUS_SPINLOCK 33
+#define RST_BUS_DBG 34
+#define RST_BUS_LVDS 35
+#define RST_BUS_CODEC 36
+#define RST_BUS_SPDIF 37
+#define RST_BUS_THS 38
+#define RST_BUS_I2S0 39
+#define RST_BUS_I2S1 40
+#define RST_BUS_I2S2 41
+#define RST_BUS_I2C0 42
+#define RST_BUS_I2C1 43
+#define RST_BUS_I2C2 44
+#define RST_BUS_SCR 45
+#define RST_BUS_UART0 46
+#define RST_BUS_UART1 47
+#define RST_BUS_UART2 48
+#define RST_BUS_UART3 49
+#define RST_BUS_UART4 50
-#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */
+#endif /* _DT_BINDINGS_RST_SUN50I_A64_H_ */
--
2.9.3
^ permalink raw reply related
* [PATCH v3 8/9] Documentation: devicetree: add vendor prefix for Pine64
From: Maxime Ripard @ 2016-10-03 8:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161003080913.24197-1-maxime.ripard@free-electrons.com>
From: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
[Maxime: Change title prefix to match the usual style]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 7b6bda3b4189..3dd1d77c1c30 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -200,6 +200,7 @@ parade Parade Technologies Inc.
pericom Pericom Technology Inc.
phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd
+pine64 Pine64
plathome Plat'Home Co., Ltd.
plda PLDA
pixcir PIXCIR MICROELECTRONICS Co., Ltd
--
2.9.3
^ permalink raw reply related
* [PATCH v3 7/9] arm64: dts: add Allwinner A64 SoC .dtsi
From: Maxime Ripard @ 2016-10-03 8:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161003080913.24197-1-maxime.ripard@free-electrons.com>
From: Andre Przywara <andre.przywara@arm.com>
The Allwinner A64 SoC is a low-cost chip with 4 ARM Cortex-A53 cores
and the typical tablet / TV box peripherals.
The SoC is based on the (32-bit) Allwinner H3 chip, sharing most of
the peripherals and the memory map.
Although the cores are proper 64-bit ones, the whole SoC is actually
limited to 4GB (including all the supported DRAM), so we use 32-bit
address and size cells. This has the nice feature of us being able to
reuse the DT for 32-bit kernels as well.
This .dtsi lists the hardware that we support so far.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
[Maxime: Convert to CCU binding, drop the MMC support for now]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
Documentation/devicetree/bindings/arm/sunxi.txt | 1 +
MAINTAINERS | 1 +
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 263 ++++++++++++++++++++++++
3 files changed, 265 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt
index 3975d0a0e4c2..4d6467cc2aa2 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.txt
+++ b/Documentation/devicetree/bindings/arm/sunxi.txt
@@ -14,4 +14,5 @@ using one of the following compatible strings:
allwinner,sun8i-a83t
allwinner,sun8i-h3
allwinner,sun9i-a80
+ allwinner,sun50i-a64
nextthing,gr8
diff --git a/MAINTAINERS b/MAINTAINERS
index 7be47efb2159..926879c05dc6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -983,6 +983,7 @@ L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
S: Maintained
N: sun[x456789]i
F: arch/arm/boot/dts/ntc-gr8*
+F: arch/arm64/boot/dts/allwinner/
ARM/Allwinner SoC Clock Support
M: Emilio L?pez <emilio@elopez.com.ar>
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
new file mode 100644
index 000000000000..0f75fec23dc9
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -0,0 +1,263 @@
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ * based on the Allwinner H3 dtsi:
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun50i-a64-ccu.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu at 1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu at 2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu at 3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <3>;
+ enable-method = "psci";
+ };
+ };
+
+ osc24M: osc24M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ccu: clock at 01c20000 {
+ compatible = "allwinner,sun50i-a64-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pio: pinctrl at 1c20800 {
+ compatible = "allwinner,sun50i-a64-pinctrl";
+ reg = <0x01c20800 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_PIO>;
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ i2c1_pins: i2c1_pins {
+ allwinner,pins = "PH2", "PH3";
+ allwinner,function = "i2c1";
+ };
+
+ uart0_pins_a: uart0 at 0 {
+ allwinner,pins = "PB8", "PB9";
+ allwinner,function = "uart0";
+ };
+ };
+
+ uart0: serial at 1c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ status = "disabled";
+ };
+
+ uart1: serial at 1c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ status = "disabled";
+ };
+
+ uart2: serial at 1c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ status = "disabled";
+ };
+
+ uart3: serial at 1c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ status = "disabled";
+ };
+
+ uart4: serial at 1c29000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29000 0x400>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
+ status = "disabled";
+ };
+
+ rtc: rtc at 1f00000 {
+ compatible = "allwinner,sun6i-a31-rtc";
+ reg = <0x01f00000 0x54>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ i2c0: i2c at 1c2ac00 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c at 1c2b000 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c at 1c2b400 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x01c2b400 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gic: interrupt-controller at 1c81000 {
+ compatible = "arm,gic-400";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x2000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+};
--
2.9.3
^ permalink raw reply related
* [PATCH v3 6/9] clk: sunxi-ng: Add A64 clocks
From: Maxime Ripard @ 2016-10-03 8:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161003080913.24197-1-maxime.ripard@free-electrons.com>
Add the A64 CCU clocks set.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
.../devicetree/bindings/clock/sunxi-ccu.txt | 1 +
drivers/clk/sunxi-ng/Kconfig | 11 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 918 +++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun50i-a64.h | 72 ++
include/dt-bindings/clock/sun50i-a64-ccu.h | 134 +++
include/dt-bindings/reset/sun50i-a64-ccu.h | 97 +++
7 files changed, 1234 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a64.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a64.h
create mode 100644 include/dt-bindings/clock/sun50i-a64-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-a64-ccu.h
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 3868458a5feb..74d44a4273f2 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -7,6 +7,7 @@ Required properties :
- "allwinner,sun8i-a23-ccu"
- "allwinner,sun8i-a33-ccu"
- "allwinner,sun8i-h3-ccu"
+ - "allwinner,sun50i-a64-ccu"
- reg: Must contain the registers base address and length
- clocks: phandle to the oscillators feeding the CCU. Two are needed:
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 1b4c55a53d7a..8454c6e3dd65 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -53,6 +53,17 @@ config SUNXI_CCU_MP
# SoC Drivers
+config SUN50I_A64_CCU
+ bool "Support for the Allwinner A64 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NKMP
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ select SUNXI_CCU_PHASE
+ default ARM64 && ARCH_SUNXI
+
config SUN6I_A31_CCU
bool "Support for the Allwinner A31/A31s CCU"
select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 106cba27c331..24fbc6e5deb8 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_SUNXI_CCU_NM) += ccu_nm.o
obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o
# SoC support
+obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
new file mode 100644
index 000000000000..c0e96bf6d104
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -0,0 +1,918 @@
+/*
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun50i-a64.h"
+
+static struct ccu_nkmp pll_cpux_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT(8, 5),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV_MAX(16, 2, 4),
+ .common = {
+ .reg = 0x000,
+ .hw.init = CLK_HW_INIT("pll-cpux",
+ "osc24M",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN50I_A64_PLL_AUDIO_REG 0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+ "osc24M", 0x008,
+ 8, 7, /* N */
+ 0, 5, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video0_clk, "pll-video0",
+ "osc24M", 0x010,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+ "osc24M", 0x018,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
+ "osc24M", 0x020,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static struct ccu_nk pll_periph0_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT(8, 5),
+ .k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
+ .fixed_post_div = 2,
+ .common = {
+ .reg = 0x028,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
+ &ccu_nk_ops, 0),
+ },
+};
+
+static struct ccu_nk pll_periph1_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT(8, 5),
+ .k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
+ .fixed_post_div = 2,
+ .common = {
+ .reg = 0x02c,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
+ &ccu_nk_ops, 0),
+ },
+};
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video1_clk, "pll-video1",
+ "osc24M", 0x030,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
+ "osc24M", 0x038,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+/*
+ * The output function can be changed to something more complex that
+ * we do not handle yet.
+ *
+ * Hardcode the mode so that we don't fall in that case.
+ */
+#define SUN50I_A64_PLL_MIPI_REG 0x040
+
+struct ccu_nkm pll_mipi_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT(8, 4),
+ .k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
+ .m = _SUNXI_CCU_DIV(0, 4),
+ .common = {
+ .reg = 0x040,
+ .hw.init = CLK_HW_INIT("pll-mipi", "pll-video0",
+ &ccu_nkm_ops, 0),
+ },
+};
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_hsic_clk, "pll-hsic",
+ "osc24M", 0x044,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
+ "osc24M", 0x048,
+ 8, 7, /* N */
+ 0, 4, /* M */
+ BIT(24), /* frac enable */
+ BIT(25), /* frac select */
+ 270000000, /* frac rate 0 */
+ 297000000, /* frac rate 1 */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
+ "osc24M", 0x04c,
+ 8, 7, /* N */
+ 0, 2, /* M */
+ BIT(31), /* gate */
+ BIT(28), /* lock */
+ 0);
+
+static const char * const cpux_parents[] = { "osc32k", "osc24M",
+ "pll-cpux" , "pll-cpux" };
+static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
+ 0x050, 16, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+ "axi" , "pll-periph0" };
+static struct ccu_div ahb1_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+ .mux = {
+ .shift = 12,
+ .width = 2,
+
+ .variable_prediv = {
+ .index = 3,
+ .shift = 6,
+ .width = 2,
+ },
+ },
+
+ .common = {
+ .reg = 0x054,
+ .features = CCU_FEATURE_VARIABLE_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb1",
+ ahb1_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct clk_div_table apb1_div_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 8 },
+ { /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
+ 0x054, 8, 2, apb1_div_table, 0);
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+ "pll-periph0-2x" ,
+ "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
+static const struct ccu_mux_fixed_prediv ahb2_fixed_predivs[] = {
+ { .index = 1, .div = 2 },
+};
+static struct ccu_mux ahb2_clk = {
+ .mux = {
+ .shift = 0,
+ .width = 1,
+ .fixed_predivs = ahb2_fixed_predivs,
+ .n_predivs = ARRAY_SIZE(ahb2_fixed_predivs),
+ },
+
+ .common = {
+ .reg = 0x05c,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb2",
+ ahb2_parents,
+ &ccu_mux_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb1",
+ 0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "ahb1",
+ 0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb1",
+ 0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb1",
+ 0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb1",
+ 0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb1",
+ 0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "ahb1",
+ 0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb2",
+ 0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb1",
+ 0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1",
+ 0x060, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb1",
+ 0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb1",
+ 0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
+ 0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb1",
+ 0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb2",
+ 0x060, BIT(25), 0);
+static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb1",
+ 0x060, BIT(28), 0);
+static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb2",
+ 0x060, BIT(29), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb1",
+ 0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_tcon0_clk, "bus-tcon0", "ahb1",
+ 0x064, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_tcon1_clk, "bus-tcon1", "ahb1",
+ 0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "ahb1",
+ 0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb1",
+ 0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb1",
+ 0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb1",
+ 0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "ahb1",
+ 0x064, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1",
+ 0x064, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1",
+ 0x064, BIT(22), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
+ 0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1",
+ 0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
+ 0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1",
+ 0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
+ 0x068, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1",
+ 0x068, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1",
+ 0x068, BIT(14), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
+ 0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2",
+ 0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2",
+ 0x06c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_scr_clk, "bus-scr", "apb2",
+ 0x06c, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2",
+ 0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2",
+ 0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2",
+ 0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2",
+ 0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2",
+ 0x06c, BIT(20), 0);
+
+static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "ahb1",
+ 0x070, BIT(7), 0);
+
+static struct clk_div_table ths_div_table[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 6 },
+};
+static const char * const ths_parents[] = { "osc24M" };
+static struct ccu_div ths_clk = {
+ .enable = BIT(31),
+ .div = _SUNXI_CCU_DIV_TABLE(0, 2, ths_div_table),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0x074,
+ .hw.init = CLK_HW_INIT_PARENTS("ths",
+ ths_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
+ "pll-periph1" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const mmc_default_parents[] = { "osc24M", "pll-periph0-2x",
+ "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mmc_default_parents, 0x088,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mmc_default_parents, 0x08c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mmc_default_parents, 0x090,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", mmc_default_parents, 0x09c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
+ 0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
+ 0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
+ 0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
+ 0x0c0, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
+ 0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M",
+ 0x0cc, BIT(9), 0);
+static SUNXI_CCU_GATE(usb_hsic_clk, "usb-hsic", "pll-hsic",
+ 0x0cc, BIT(10), 0);
+static SUNXI_CCU_GATE(usb_hsic_12m_clk, "usb-hsic-12M", "osc12M",
+ 0x0cc, BIT(11), 0);
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M",
+ 0x0cc, BIT(16), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "usb-ohci0",
+ 0x0cc, BIT(17), 0);
+
+static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
+static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
+ 0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "dram",
+ 0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk, "dram-csi", "dram",
+ 0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace", "dram",
+ 0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "dram",
+ 0x100, BIT(3), 0);
+
+static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
+ 0x104, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tcon0_parents[] = { "pll-mipi", "pll-video0-2x" };
+static const u8 tcon0_table[] = { 0, 2, };
+static SUNXI_CCU_MUX_TABLE_WITH_GATE(tcon0_clk, "tcon0", tcon0_parents,
+ tcon0_table, 0x118, 24, 3, BIT(31),
+ CLK_SET_RATE_PARENT);
+
+static const char * const tcon1_parents[] = { "pll-video0", "pll-video1" };
+static const u8 tcon1_table[] = { 0, 2, };
+struct ccu_div tcon1_clk = {
+ .enable = BIT(31),
+ .div = _SUNXI_CCU_DIV(0, 4),
+ .mux = _SUNXI_CCU_MUX_TABLE(24, 3, tcon1_table),
+ .common = {
+ .reg = 0x11c,
+ .hw.init = CLK_HW_INIT_PARENTS("tcon1",
+ tcon1_parents,
+ &ccu_div_ops,
+ CLK_SET_RATE_PARENT),
+ },
+};
+
+static const char * const deinterlace_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", deinterlace_parents,
+ 0x124, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M",
+ 0x130, BIT(31), 0);
+
+static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
+ 0x134, 16, 4, 24, 3, BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video1", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_mclk_clk, "csi-mclk", csi_mclk_parents,
+ 0x134, 0, 5, 8, 3, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+ 0x13c, 16, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ac_dig_clk, "ac-dig", "pll-audio",
+ 0x140, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(ac_dig_4x_clk, "ac-dig-4x", "pll-audio-4x",
+ 0x140, BIT(30), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
+ 0x144, BIT(31), 0);
+
+static const char * const hdmi_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+ 0x150, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_GATE(hdmi_ddc_clk, "hdmi-ddc", "osc24M",
+ 0x154, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
+ "pll-ddr0", "pll-ddr1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
+ 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
+
+static const char * const dsi_dphy_parents[] = { "pll-video0", "pll-periph0" };
+static const u8 dsi_dphy_table[] = { 0, 2, };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(dsi_dphy_clk, "dsi-dphy",
+ dsi_dphy_parents, dsi_dphy_table,
+ 0x168, 0, 3, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
+ 0x1a0, 0, 3, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Fixed Factor clocks */
+static CLK_FIXED_FACTOR(osc12M_clk, "osc12M", "osc24M", 1, 2, 0);
+
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+ "pll-periph0", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_periph1_2x_clk, "pll-periph1-2x",
+ "pll-periph1", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+ "pll-video0", 1, 2, CLK_SET_RATE_PARENT);
+
+static struct ccu_common *sun50i_a64_ccu_clks[] = {
+ &pll_cpux_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video0_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr0_clk.common,
+ &pll_periph0_clk.common,
+ &pll_periph1_clk.common,
+ &pll_video1_clk.common,
+ &pll_gpu_clk.common,
+ &pll_mipi_clk.common,
+ &pll_hsic_clk.common,
+ &pll_de_clk.common,
+ &pll_ddr1_clk.common,
+ &cpux_clk.common,
+ &axi_clk.common,
+ &ahb1_clk.common,
+ &apb1_clk.common,
+ &apb2_clk.common,
+ &ahb2_clk.common,
+ &bus_mipi_dsi_clk.common,
+ &bus_ce_clk.common,
+ &bus_dma_clk.common,
+ &bus_mmc0_clk.common,
+ &bus_mmc1_clk.common,
+ &bus_mmc2_clk.common,
+ &bus_nand_clk.common,
+ &bus_dram_clk.common,
+ &bus_emac_clk.common,
+ &bus_ts_clk.common,
+ &bus_hstimer_clk.common,
+ &bus_spi0_clk.common,
+ &bus_spi1_clk.common,
+ &bus_otg_clk.common,
+ &bus_ehci0_clk.common,
+ &bus_ehci1_clk.common,
+ &bus_ohci0_clk.common,
+ &bus_ohci1_clk.common,
+ &bus_ve_clk.common,
+ &bus_tcon0_clk.common,
+ &bus_tcon1_clk.common,
+ &bus_deinterlace_clk.common,
+ &bus_csi_clk.common,
+ &bus_hdmi_clk.common,
+ &bus_de_clk.common,
+ &bus_gpu_clk.common,
+ &bus_msgbox_clk.common,
+ &bus_spinlock_clk.common,
+ &bus_codec_clk.common,
+ &bus_spdif_clk.common,
+ &bus_pio_clk.common,
+ &bus_ths_clk.common,
+ &bus_i2s0_clk.common,
+ &bus_i2s1_clk.common,
+ &bus_i2s2_clk.common,
+ &bus_i2c0_clk.common,
+ &bus_i2c1_clk.common,
+ &bus_i2c2_clk.common,
+ &bus_scr_clk.common,
+ &bus_uart0_clk.common,
+ &bus_uart1_clk.common,
+ &bus_uart2_clk.common,
+ &bus_uart3_clk.common,
+ &bus_uart4_clk.common,
+ &bus_dbg_clk.common,
+ &ths_clk.common,
+ &nand_clk.common,
+ &mmc0_clk.common,
+ &mmc1_clk.common,
+ &mmc2_clk.common,
+ &ts_clk.common,
+ &ce_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &i2s0_clk.common,
+ &i2s1_clk.common,
+ &i2s2_clk.common,
+ &spdif_clk.common,
+ &usb_phy0_clk.common,
+ &usb_phy1_clk.common,
+ &usb_hsic_clk.common,
+ &usb_hsic_12m_clk.common,
+ &usb_ohci0_clk.common,
+ &usb_ohci1_clk.common,
+ &dram_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi_clk.common,
+ &dram_deinterlace_clk.common,
+ &dram_ts_clk.common,
+ &de_clk.common,
+ &tcon0_clk.common,
+ &tcon1_clk.common,
+ &deinterlace_clk.common,
+ &csi_misc_clk.common,
+ &csi_sclk_clk.common,
+ &csi_mclk_clk.common,
+ &ve_clk.common,
+ &ac_dig_clk.common,
+ &ac_dig_4x_clk.common,
+ &avs_clk.common,
+ &hdmi_clk.common,
+ &hdmi_ddc_clk.common,
+ &mbus_clk.common,
+ &dsi_dphy_clk.common,
+ &gpu_clk.common,
+};
+
+static struct clk_hw_onecell_data sun50i_a64_hw_clks = {
+ .hws = {
+ [CLK_OSC_12M] = &osc12M_clk.hw,
+ [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
+ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
+ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
+ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
+ [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
+ [CLK_PLL_MIPI] = &pll_mipi_clk.common.hw,
+ [CLK_PLL_HSIC] = &pll_hsic_clk.common.hw,
+ [CLK_PLL_DE] = &pll_de_clk.common.hw,
+ [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
+ [CLK_CPUX] = &cpux_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB1] = &ahb1_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_APB2] = &apb2_clk.common.hw,
+ [CLK_AHB2] = &ahb2_clk.common.hw,
+ [CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
+ [CLK_BUS_CE] = &bus_ce_clk.common.hw,
+ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
+ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
+ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
+ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
+ [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
+ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
+ [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
+ [CLK_BUS_TS] = &bus_ts_clk.common.hw,
+ [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
+ [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
+ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
+ [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
+ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
+ [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
+ [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
+ [CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw,
+ [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
+ [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
+ [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
+ [CLK_BUS_DE] = &bus_de_clk.common.hw,
+ [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
+ [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
+ [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
+ [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
+ [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
+ [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
+ [CLK_BUS_THS] = &bus_ths_clk.common.hw,
+ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
+ [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
+ [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
+ [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
+ [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
+ [CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
+ [CLK_BUS_SCR] = &bus_scr_clk.common.hw,
+ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
+ [CLK_THS] = &ths_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_CE] = &ce_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_I2S1] = &i2s1_clk.common.hw,
+ [CLK_I2S2] = &i2s2_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
+ [CLK_USB_HSIC] = &usb_hsic_clk.common.hw,
+ [CLK_USB_HSIC_12M] = &usb_hsic_12m_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_DRAM] = &dram_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
+ [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DE] = &de_clk.common.hw,
+ [CLK_TCON0] = &tcon0_clk.common.hw,
+ [CLK_TCON1] = &tcon1_clk.common.hw,
+ [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
+ [CLK_CSI_MISC] = &csi_misc_clk.common.hw,
+ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
+ [CLK_CSI_MCLK] = &csi_mclk_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_AC_DIG] = &ac_dig_clk.common.hw,
+ [CLK_AC_DIG_4X] = &ac_dig_4x_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_HDMI_DDC] = &hdmi_ddc_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_DSI_DPHY] = &dsi_dphy_clk.common.hw,
+ [CLK_GPU] = &gpu_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun50i_a64_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_HSIC] = { 0x0cc, BIT(2) },
+
+ [RST_DRAM] = { 0x0f4, BIT(31) },
+ [RST_MBUS] = { 0x0fc, BIT(31) },
+
+ [RST_BUS_MIPI_DSI] = { 0x2c0, BIT(1) },
+ [RST_BUS_CE] = { 0x2c0, BIT(5) },
+ [RST_BUS_DMA] = { 0x2c0, BIT(6) },
+ [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
+ [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
+ [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
+ [RST_BUS_NAND] = { 0x2c0, BIT(13) },
+ [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
+ [RST_BUS_EMAC] = { 0x2c0, BIT(17) },
+ [RST_BUS_TS] = { 0x2c0, BIT(18) },
+ [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
+ [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
+ [RST_BUS_SPI1] = { 0x2c0, BIT(21) },
+ [RST_BUS_OTG] = { 0x2c0, BIT(23) },
+ [RST_BUS_EHCI0] = { 0x2c0, BIT(24) },
+ [RST_BUS_EHCI1] = { 0x2c0, BIT(25) },
+ [RST_BUS_OHCI0] = { 0x2c0, BIT(28) },
+ [RST_BUS_OHCI1] = { 0x2c0, BIT(29) },
+
+ [RST_BUS_VE] = { 0x2c4, BIT(0) },
+ [RST_BUS_TCON0] = { 0x2c4, BIT(3) },
+ [RST_BUS_TCON1] = { 0x2c4, BIT(4) },
+ [RST_BUS_DEINTERLACE] = { 0x2c4, BIT(5) },
+ [RST_BUS_CSI] = { 0x2c4, BIT(8) },
+ [RST_BUS_HDMI0] = { 0x2c4, BIT(10) },
+ [RST_BUS_HDMI1] = { 0x2c4, BIT(11) },
+ [RST_BUS_DE] = { 0x2c4, BIT(12) },
+ [RST_BUS_GPU] = { 0x2c4, BIT(20) },
+ [RST_BUS_MSGBOX] = { 0x2c4, BIT(21) },
+ [RST_BUS_SPINLOCK] = { 0x2c4, BIT(22) },
+ [RST_BUS_DBG] = { 0x2c4, BIT(31) },
+
+ [RST_BUS_LVDS] = { 0x2c8, BIT(0) },
+
+ [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
+ [RST_BUS_SPDIF] = { 0x2d0, BIT(1) },
+ [RST_BUS_THS] = { 0x2d0, BIT(8) },
+ [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
+ [RST_BUS_I2S1] = { 0x2d0, BIT(13) },
+ [RST_BUS_I2S2] = { 0x2d0, BIT(14) },
+
+ [RST_BUS_I2C0] = { 0x2d8, BIT(0) },
+ [RST_BUS_I2C1] = { 0x2d8, BIT(1) },
+ [RST_BUS_I2C2] = { 0x2d8, BIT(2) },
+ [RST_BUS_SCR] = { 0x2d8, BIT(5) },
+ [RST_BUS_UART0] = { 0x2d8, BIT(16) },
+ [RST_BUS_UART1] = { 0x2d8, BIT(17) },
+ [RST_BUS_UART2] = { 0x2d8, BIT(18) },
+ [RST_BUS_UART3] = { 0x2d8, BIT(19) },
+ [RST_BUS_UART4] = { 0x2d8, BIT(20) },
+};
+
+static const struct sunxi_ccu_desc sun50i_a64_ccu_desc = {
+ .ccu_clks = sun50i_a64_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun50i_a64_ccu_clks),
+
+ .hw_clks = &sun50i_a64_hw_clks,
+
+ .resets = sun50i_a64_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun50i_a64_ccu_resets),
+};
+
+static int sun50i_a64_ccu_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ void __iomem *reg;
+ u32 val;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(reg)) {
+ dev_err(&pdev->dev, "Could not map the clock registers\n");
+ return PTR_ERR(reg);
+ }
+
+ /* Force the PLL-Audio-1x divider to 4 */
+ val = readl(reg + SUN50I_A64_PLL_AUDIO_REG);
+ val &= ~GENMASK(19, 16);
+ writel(val | (3 << 16), reg + SUN50I_A64_PLL_AUDIO_REG);
+
+ writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG);
+
+ return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
+}
+
+static const struct of_device_id sun50i_a64_ccu_ids[] = {
+ { .compatible = "allwinner,sun50i-a64-ccu" },
+ { },
+};
+
+static struct platform_driver sun50i_a64_ccu_driver = {
+ .probe = sun50i_a64_ccu_probe,
+ .driver = {
+ .name = "sun50i-a64-ccu",
+ .of_match_table = sun50i_a64_ccu_ids,
+ },
+};
+builtin_platform_driver(sun50i_a64_ccu_driver);
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.h b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
new file mode 100644
index 000000000000..9b3cd24b78d2
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2016 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN50I_A64_H_
+#define _CCU_SUN50I_A64_H_
+
+#include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/reset/sun50i-a64-ccu.h>
+
+#define CLK_OSC_12M 0
+#define CLK_PLL_CPUX 1
+#define CLK_PLL_AUDIO_BASE 2
+#define CLK_PLL_AUDIO 3
+#define CLK_PLL_AUDIO_2X 4
+#define CLK_PLL_AUDIO_4X 5
+#define CLK_PLL_AUDIO_8X 6
+#define CLK_PLL_VIDEO0 7
+#define CLK_PLL_VIDEO0_2X 8
+#define CLK_PLL_VE 9
+#define CLK_PLL_DDR0 10
+#define CLK_PLL_PERIPH0 11
+#define CLK_PLL_PERIPH0_2X 12
+#define CLK_PLL_PERIPH1 13
+#define CLK_PLL_PERIPH1_2X 14
+#define CLK_PLL_VIDEO1 15
+#define CLK_PLL_GPU 16
+#define CLK_PLL_MIPI 17
+#define CLK_PLL_HSIC 18
+#define CLK_PLL_DE 19
+#define CLK_PLL_DDR1 20
+#define CLK_CPUX 21
+#define CLK_AXI 22
+#define CLK_APB 23
+#define CLK_AHB1 24
+#define CLK_APB1 25
+#define CLK_APB2 26
+#define CLK_AHB2 27
+
+/* All the bus gates are exported */
+
+/* The first bunch of module clocks are exported */
+
+#define CLK_USB_OHCI0_12M 90
+
+#define CLK_USB_OHCI1_12M 92
+
+#define CLK_DRAM 94
+
+/* All the DRAM gates are exported */
+
+/* Some more module clocks are exported */
+
+#define CLK_MBUS 112
+
+/* And the DSI and GPU module clock is exported */
+
+#define CLK_NUMBER (CLK_GPU + 1)
+
+#endif /* _CCU_SUN50I_A64_H_ */
diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h
new file mode 100644
index 000000000000..370c0a0473fc
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-a64-ccu.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_
+#define _DT_BINDINGS_CLK_SUN50I_A64_H_
+
+#define CLK_BUS_MIPI_DSI 28
+#define CLK_BUS_CE 29
+#define CLK_BUS_DMA 30
+#define CLK_BUS_MMC0 31
+#define CLK_BUS_MMC1 32
+#define CLK_BUS_MMC2 33
+#define CLK_BUS_NAND 34
+#define CLK_BUS_DRAM 35
+#define CLK_BUS_EMAC 36
+#define CLK_BUS_TS 37
+#define CLK_BUS_HSTIMER 38
+#define CLK_BUS_SPI0 39
+#define CLK_BUS_SPI1 40
+#define CLK_BUS_OTG 41
+#define CLK_BUS_EHCI0 42
+#define CLK_BUS_EHCI1 43
+#define CLK_BUS_OHCI0 44
+#define CLK_BUS_OHCI1 45
+#define CLK_BUS_VE 46
+#define CLK_BUS_TCON0 47
+#define CLK_BUS_TCON1 48
+#define CLK_BUS_DEINTERLACE 49
+#define CLK_BUS_CSI 50
+#define CLK_BUS_HDMI 51
+#define CLK_BUS_DE 52
+#define CLK_BUS_GPU 53
+#define CLK_BUS_MSGBOX 54
+#define CLK_BUS_SPINLOCK 55
+#define CLK_BUS_CODEC 56
+#define CLK_BUS_SPDIF 57
+#define CLK_BUS_PIO 58
+#define CLK_BUS_THS 59
+#define CLK_BUS_I2S0 60
+#define CLK_BUS_I2S1 61
+#define CLK_BUS_I2S2 62
+#define CLK_BUS_I2C0 63
+#define CLK_BUS_I2C1 64
+#define CLK_BUS_I2C2 65
+#define CLK_BUS_SCR 66
+#define CLK_BUS_UART0 67
+#define CLK_BUS_UART1 68
+#define CLK_BUS_UART2 69
+#define CLK_BUS_UART3 70
+#define CLK_BUS_UART4 71
+#define CLK_BUS_DBG 72
+#define CLK_THS 73
+#define CLK_NAND 74
+#define CLK_MMC0 75
+#define CLK_MMC1 76
+#define CLK_MMC2 77
+#define CLK_TS 78
+#define CLK_CE 79
+#define CLK_SPI0 80
+#define CLK_SPI1 81
+#define CLK_I2S0 82
+#define CLK_I2S1 83
+#define CLK_I2S2 84
+#define CLK_SPDIF 85
+#define CLK_USB_PHY0 86
+#define CLK_USB_PHY1 87
+#define CLK_USB_HSIC 88
+#define CLK_USB_HSIC_12M 89
+
+#define CLK_USB_OHCI0 91
+
+#define CLK_USB_OHCI1 93
+
+#define CLK_DRAM_VE 95
+#define CLK_DRAM_CSI 96
+#define CLK_DRAM_DEINTERLACE 97
+#define CLK_DRAM_TS 98
+#define CLK_DE 99
+#define CLK_TCON0 100
+#define CLK_TCON1 101
+#define CLK_DEINTERLACE 102
+#define CLK_CSI_MISC 103
+#define CLK_CSI_SCLK 104
+#define CLK_CSI_MCLK 105
+#define CLK_VE 106
+#define CLK_AC_DIG 107
+#define CLK_AC_DIG_4X 108
+#define CLK_AVS 109
+#define CLK_HDMI 110
+#define CLK_HDMI_DDC 111
+
+#define CLK_DSI_DPHY 113
+#define CLK_GPU 114
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_H_ */
diff --git a/include/dt-bindings/reset/sun50i-a64-ccu.h b/include/dt-bindings/reset/sun50i-a64-ccu.h
new file mode 100644
index 000000000000..e61fac294d73
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-a64-ccu.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN50I_A64_H_
+#define _DT_BINDINGS_RST_SUN50I_A64_H_
+
+#define RST_USB_PHY0 0
+#define RST_USB_PHY1 1
+#define RST_USB_HSIC 2
+#define RST_MBUS 3
+#define RST_BUS_MIPI_DSI 4
+#define RST_BUS_CE 5
+#define RST_BUS_DMA 6
+#define RST_BUS_MMC0 7
+#define RST_BUS_MMC1 8
+#define RST_BUS_MMC2 9
+#define RST_BUS_NAND 10
+#define RST_BUS_DRAM 11
+#define RST_BUS_EMAC 12
+#define RST_BUS_TS 13
+#define RST_BUS_HSTIMER 14
+#define RST_BUS_SPI0 15
+#define RST_BUS_SPI1 16
+#define RST_BUS_OTG 17
+#define RST_BUS_EHCI0 18
+#define RST_BUS_EHCI1 19
+#define RST_BUS_OHCI0 20
+#define RST_BUS_OHCI1 21
+#define RST_BUS_VE 22
+#define RST_BUS_TCON0 23
+#define RST_BUS_TCON1 24
+#define RST_BUS_DEINTERLACE 25
+#define RST_BUS_CSI 26
+#define RST_BUS_HDMI0 27
+#define RST_BUS_HDMI1 28
+#define RST_BUS_DE 29
+#define RST_BUS_GPU 30
+#define RST_BUS_MSGBOX 31
+#define RST_BUS_SPINLOCK 32
+#define RST_BUS_DBG 33
+#define RST_BUS_LVDS 34
+#define RST_BUS_CODEC 35
+#define RST_BUS_SPDIF 36
+#define RST_BUS_THS 37
+#define RST_BUS_I2S0 38
+#define RST_BUS_I2S1 39
+#define RST_BUS_I2S2 40
+#define RST_BUS_I2C0 41
+#define RST_BUS_I2C1 42
+#define RST_BUS_I2C2 43
+#define RST_BUS_SCR 44
+#define RST_BUS_UART0 45
+#define RST_BUS_UART1 46
+#define RST_BUS_UART2 47
+#define RST_BUS_UART3 48
+#define RST_BUS_UART4 49
+
+#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */
--
2.9.3
^ permalink raw reply related
* [PATCH v3 5/9] clk: sunxi-ng: Implement minimum for multipliers
From: Maxime Ripard @ 2016-10-03 8:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161003080913.24197-1-maxime.ripard@free-electrons.com>
Allow the CCU drivers to specify a multiplier for their clocks.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi-ng/ccu_mult.c | 2 +-
drivers/clk/sunxi-ng/ccu_mult.h | 13 +++++++++----
drivers/clk/sunxi-ng/ccu_nk.c | 8 ++++----
drivers/clk/sunxi-ng/ccu_nkm.c | 8 ++++----
drivers/clk/sunxi-ng/ccu_nkmp.c | 4 ++--
drivers/clk/sunxi-ng/ccu_nm.c | 2 +-
6 files changed, 21 insertions(+), 16 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_mult.c b/drivers/clk/sunxi-ng/ccu_mult.c
index 6a02ffee5386..678b6cb49f01 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.c
+++ b/drivers/clk/sunxi-ng/ccu_mult.c
@@ -105,7 +105,7 @@ static int ccu_mult_set_rate(struct clk_hw *hw, unsigned long rate,
ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1,
&parent_rate);
- _cm.min = 1;
+ _cm.min = cm->mult.min;
_cm.max = 1 << cm->mult.width;
ccu_mult_find_best(parent_rate, rate, &_cm);
diff --git a/drivers/clk/sunxi-ng/ccu_mult.h b/drivers/clk/sunxi-ng/ccu_mult.h
index 113780b7558e..c1a2134bdc71 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.h
+++ b/drivers/clk/sunxi-ng/ccu_mult.h
@@ -7,14 +7,19 @@
struct ccu_mult_internal {
u8 shift;
u8 width;
+ u8 min;
};
-#define _SUNXI_CCU_MULT(_shift, _width) \
- { \
- .shift = _shift, \
- .width = _width, \
+#define _SUNXI_CCU_MULT_MIN(_shift, _width, _min) \
+ { \
+ .shift = _shift, \
+ .width = _width, \
+ .min = _min, \
}
+#define _SUNXI_CCU_MULT(_shift, _width) \
+ _SUNXI_CCU_MULT_MIN(_shift, _width, 1)
+
struct ccu_mult {
u32 enable;
diff --git a/drivers/clk/sunxi-ng/ccu_nk.c b/drivers/clk/sunxi-ng/ccu_nk.c
index a42d870ba0ef..eaf0fdf78d2b 100644
--- a/drivers/clk/sunxi-ng/ccu_nk.c
+++ b/drivers/clk/sunxi-ng/ccu_nk.c
@@ -97,9 +97,9 @@ static long ccu_nk_round_rate(struct clk_hw *hw, unsigned long rate,
if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate *= nk->fixed_post_div;
- _nk.min_n = 1;
+ _nk.min_n = nk->n.min;
_nk.max_n = 1 << nk->n.width;
- _nk.min_k = 1;
+ _nk.min_k = nk->k.min;
_nk.max_k = 1 << nk->k.width;
ccu_nk_find_best(*parent_rate, rate, &_nk);
@@ -122,9 +122,9 @@ static int ccu_nk_set_rate(struct clk_hw *hw, unsigned long rate,
if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate = rate * nk->fixed_post_div;
- _nk.min_n = 1;
+ _nk.min_n = nk->n.min;
_nk.max_n = 1 << nk->n.width;
- _nk.min_k = 1;
+ _nk.min_k = nk->k.min;
_nk.max_k = 1 << nk->k.width;
ccu_nk_find_best(parent_rate, rate, &_nk);
diff --git a/drivers/clk/sunxi-ng/ccu_nkm.c b/drivers/clk/sunxi-ng/ccu_nkm.c
index b2a5fccf2f8c..715b49211ddb 100644
--- a/drivers/clk/sunxi-ng/ccu_nkm.c
+++ b/drivers/clk/sunxi-ng/ccu_nkm.c
@@ -100,9 +100,9 @@ static unsigned long ccu_nkm_round_rate(struct ccu_mux_internal *mux,
struct ccu_nkm *nkm = data;
struct _ccu_nkm _nkm;
- _nkm.min_n = 1;
+ _nkm.min_n = nkm->n.min;
_nkm.max_n = 1 << nkm->n.width;
- _nkm.min_k = 1;
+ _nkm.min_n = nkm->k.min;
_nkm.max_k = 1 << nkm->k.width;
_nkm.min_m = 1;
_nkm.max_m = nkm->m.max ?: 1 << nkm->m.width;
@@ -129,9 +129,9 @@ static int ccu_nkm_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long flags;
u32 reg;
- _nkm.min_n = 1;
+ _nkm.min_n = nkm->n.min;
_nkm.max_n = 1 << nkm->n.width;
- _nkm.min_k = 1;
+ _nkm.min_n = nkm->k.min;
_nkm.max_k = 1 << nkm->k.width;
_nkm.min_m = 1;
_nkm.max_m = nkm->m.max ?: 1 << nkm->m.width;
diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.c b/drivers/clk/sunxi-ng/ccu_nkmp.c
index 2c1398192e48..7968e0bac5db 100644
--- a/drivers/clk/sunxi-ng/ccu_nkmp.c
+++ b/drivers/clk/sunxi-ng/ccu_nkmp.c
@@ -107,9 +107,9 @@ static long ccu_nkmp_round_rate(struct clk_hw *hw, unsigned long rate,
struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw);
struct _ccu_nkmp _nkmp;
- _nkmp.min_n = 1;
+ _nkmp.min_n = nkmp->n.min;
_nkmp.max_n = 1 << nkmp->n.width;
- _nkmp.min_k = 1;
+ _nkmp.min_n = nkmp->k.min;
_nkmp.max_k = 1 << nkmp->k.width;
_nkmp.min_m = 1;
_nkmp.max_m = nkmp->m.max ?: 1 << nkmp->m.width;
diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
index 2a190bc032a9..b1f3f0e8899d 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.c
+++ b/drivers/clk/sunxi-ng/ccu_nm.c
@@ -93,7 +93,7 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
struct ccu_nm *nm = hw_to_ccu_nm(hw);
struct _ccu_nm _nm;
- _nm.min_n = 1;
+ _nm.min_n = nm->n.min;
_nm.max_n = 1 << nm->n.width;
_nm.min_m = 1;
_nm.max_m = nm->m.max ?: 1 << nm->m.width;
--
2.9.3
^ permalink raw reply related
* [PATCH v3 4/9] clk: sunxi-ng: Add minimums for all the relevant structures and clocks
From: Maxime Ripard @ 2016-10-03 8:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161003080913.24197-1-maxime.ripard@free-electrons.com>
Modify the current clocks we have to be able to specify the minimum for
each clocks we support, just like we support the max.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi-ng/ccu_mult.c | 7 ++++++-
drivers/clk/sunxi-ng/ccu_nk.c | 12 ++++++++----
drivers/clk/sunxi-ng/ccu_nkm.c | 18 ++++++++++++------
drivers/clk/sunxi-ng/ccu_nkmp.c | 16 ++++++++++++----
drivers/clk/sunxi-ng/ccu_nm.c | 12 ++++++++----
5 files changed, 46 insertions(+), 19 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_mult.c b/drivers/clk/sunxi-ng/ccu_mult.c
index 32a1964439a2..6a02ffee5386 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.c
+++ b/drivers/clk/sunxi-ng/ccu_mult.c
@@ -14,7 +14,7 @@
#include "ccu_mult.h"
struct _ccu_mult {
- unsigned long mult, max;
+ unsigned long mult, min, max;
};
static void ccu_mult_find_best(unsigned long parent, unsigned long rate,
@@ -23,6 +23,9 @@ static void ccu_mult_find_best(unsigned long parent, unsigned long rate,
int _mult;
_mult = rate / parent;
+ if (_mult < mult->min)
+ _mult = mult->min;
+
if (_mult > mult->max)
_mult = mult->max;
@@ -37,6 +40,7 @@ static unsigned long ccu_mult_round_rate(struct ccu_mux_internal *mux,
struct ccu_mult *cm = data;
struct _ccu_mult _cm;
+ _cm.min = 1;
_cm.max = 1 << cm->mult.width;
ccu_mult_find_best(parent_rate, rate, &_cm);
@@ -101,6 +105,7 @@ static int ccu_mult_set_rate(struct clk_hw *hw, unsigned long rate,
ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1,
&parent_rate);
+ _cm.min = 1;
_cm.max = 1 << cm->mult.width;
ccu_mult_find_best(parent_rate, rate, &_cm);
diff --git a/drivers/clk/sunxi-ng/ccu_nk.c b/drivers/clk/sunxi-ng/ccu_nk.c
index e7e2e75618ef..a42d870ba0ef 100644
--- a/drivers/clk/sunxi-ng/ccu_nk.c
+++ b/drivers/clk/sunxi-ng/ccu_nk.c
@@ -14,8 +14,8 @@
#include "ccu_nk.h"
struct _ccu_nk {
- unsigned long n, max_n;
- unsigned long k, max_k;
+ unsigned long n, min_n, max_n;
+ unsigned long k, min_k, max_k;
};
static void ccu_nk_find_best(unsigned long parent, unsigned long rate,
@@ -25,8 +25,8 @@ static void ccu_nk_find_best(unsigned long parent, unsigned long rate,
unsigned int best_k = 0, best_n = 0;
unsigned int _k, _n;
- for (_k = 1; _k <= nk->max_k; _k++) {
- for (_n = 1; _n <= nk->max_n; _n++) {
+ for (_k = nk->min_k; _k <= nk->max_k; _k++) {
+ for (_n = nk->min_n; _n <= nk->max_n; _n++) {
unsigned long tmp_rate = parent * _n * _k;
if (tmp_rate > rate)
@@ -97,7 +97,9 @@ static long ccu_nk_round_rate(struct clk_hw *hw, unsigned long rate,
if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate *= nk->fixed_post_div;
+ _nk.min_n = 1;
_nk.max_n = 1 << nk->n.width;
+ _nk.min_k = 1;
_nk.max_k = 1 << nk->k.width;
ccu_nk_find_best(*parent_rate, rate, &_nk);
@@ -120,7 +122,9 @@ static int ccu_nk_set_rate(struct clk_hw *hw, unsigned long rate,
if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate = rate * nk->fixed_post_div;
+ _nk.min_n = 1;
_nk.max_n = 1 << nk->n.width;
+ _nk.min_k = 1;
_nk.max_k = 1 << nk->k.width;
ccu_nk_find_best(parent_rate, rate, &_nk);
diff --git a/drivers/clk/sunxi-ng/ccu_nkm.c b/drivers/clk/sunxi-ng/ccu_nkm.c
index 0b08d000eb38..b2a5fccf2f8c 100644
--- a/drivers/clk/sunxi-ng/ccu_nkm.c
+++ b/drivers/clk/sunxi-ng/ccu_nkm.c
@@ -14,9 +14,9 @@
#include "ccu_nkm.h"
struct _ccu_nkm {
- unsigned long n, max_n;
- unsigned long k, max_k;
- unsigned long m, max_m;
+ unsigned long n, min_n, max_n;
+ unsigned long k, min_k, max_k;
+ unsigned long m, min_m, max_m;
};
static void ccu_nkm_find_best(unsigned long parent, unsigned long rate,
@@ -26,9 +26,9 @@ static void ccu_nkm_find_best(unsigned long parent, unsigned long rate,
unsigned long best_n = 0, best_k = 0, best_m = 0;
unsigned long _n, _k, _m;
- for (_k = 1; _k <= nkm->max_k; _k++) {
- for (_n = 1; _n <= nkm->max_n; _n++) {
- for (_m = 1; _n <= nkm->max_m; _m++) {
+ for (_k = nkm->min_k; _k <= nkm->max_k; _k++) {
+ for (_n = nkm->min_n; _n <= nkm->max_n; _n++) {
+ for (_m = nkm->min_m; _n <= nkm->max_m; _m++) {
unsigned long tmp_rate;
tmp_rate = parent * _n * _k / _m;
@@ -100,8 +100,11 @@ static unsigned long ccu_nkm_round_rate(struct ccu_mux_internal *mux,
struct ccu_nkm *nkm = data;
struct _ccu_nkm _nkm;
+ _nkm.min_n = 1;
_nkm.max_n = 1 << nkm->n.width;
+ _nkm.min_k = 1;
_nkm.max_k = 1 << nkm->k.width;
+ _nkm.min_m = 1;
_nkm.max_m = nkm->m.max ?: 1 << nkm->m.width;
ccu_nkm_find_best(parent_rate, rate, &_nkm);
@@ -126,8 +129,11 @@ static int ccu_nkm_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long flags;
u32 reg;
+ _nkm.min_n = 1;
_nkm.max_n = 1 << nkm->n.width;
+ _nkm.min_k = 1;
_nkm.max_k = 1 << nkm->k.width;
+ _nkm.min_m = 1;
_nkm.max_m = nkm->m.max ?: 1 << nkm->m.width;
ccu_nkm_find_best(parent_rate, rate, &_nkm);
diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.c b/drivers/clk/sunxi-ng/ccu_nkmp.c
index 4b457d8cce11..2c1398192e48 100644
--- a/drivers/clk/sunxi-ng/ccu_nkmp.c
+++ b/drivers/clk/sunxi-ng/ccu_nkmp.c
@@ -27,10 +27,10 @@ static void ccu_nkmp_find_best(unsigned long parent, unsigned long rate,
unsigned long best_n = 0, best_k = 0, best_m = 0, best_p = 0;
unsigned long _n, _k, _m, _p;
- for (_k = 1; _k <= nkmp->max_k; _k++) {
- for (_n = 1; _n <= nkm->max_n; _n++) {
- for (_m = 1; _n <= nkm->max_m; _m++) {
- for (_p = 1; _p <= nkmp->max_p; _p <<= 1) {
+ for (_k = nkmp->min_k; _k <= nkmp->max_k; _k++) {
+ for (_n = nkmp->min_n; _n <= nkmp->max_n; _n++) {
+ for (_m = nkmp->min_m; _n <= nkmp->max_m; _m++) {
+ for (_p = nkmp->min_p; _p <= nkmp->max_p; _p <<= 1) {
unsigned long tmp_rate;
tmp_rate = parent * _n * _k / (_m * _p);
@@ -107,9 +107,13 @@ static long ccu_nkmp_round_rate(struct clk_hw *hw, unsigned long rate,
struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw);
struct _ccu_nkmp _nkmp;
+ _nkmp.min_n = 1;
_nkmp.max_n = 1 << nkmp->n.width;
+ _nkmp.min_k = 1;
_nkmp.max_k = 1 << nkmp->k.width;
+ _nkmp.min_m = 1;
_nkmp.max_m = nkmp->m.max ?: 1 << nkmp->m.width;
+ _nkmp.min_p = 1;
_nkmp.max_p = nkmp->p.max ?: 1 << ((1 << nkmp->p.width) - 1);
ccu_nkmp_find_best(*parent_rate, rate, &_nkmp);
@@ -125,9 +129,13 @@ static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long flags;
u32 reg;
+ _nkmp.min_n = 1;
_nkmp.max_n = 1 << nkmp->n.width;
+ _nkmp.min_k = 1;
_nkmp.max_k = 1 << nkmp->k.width;
+ _nkmp.min_m = 1;
_nkmp.max_m = nkmp->m.max ?: 1 << nkmp->m.width;
+ _nkmp.min_p = 1;
_nkmp.max_p = nkmp->p.max ?: 1 << ((1 << nkmp->p.width) - 1);
ccu_nkmp_find_best(parent_rate, rate, &_nkmp);
diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
index c6d652289320..2a190bc032a9 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.c
+++ b/drivers/clk/sunxi-ng/ccu_nm.c
@@ -15,8 +15,8 @@
#include "ccu_nm.h"
struct _ccu_nm {
- unsigned long n, max_n;
- unsigned long m, max_m;
+ unsigned long n, min_n, max_n;
+ unsigned long m, min_m, max_m;
};
static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
@@ -26,8 +26,8 @@ static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
unsigned long best_n = 0, best_m = 0;
unsigned long _n, _m;
- for (_n = 1; _n <= nm->max_n; _n++) {
- for (_m = 1; _n <= nm->max_m; _m++) {
+ for (_n = nm->min_n; _n <= nm->max_n; _n++) {
+ for (_m = nm->min_m; _n <= nm->max_m; _m++) {
unsigned long tmp_rate = parent * _n / _m;
if (tmp_rate > rate)
@@ -93,7 +93,9 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
struct ccu_nm *nm = hw_to_ccu_nm(hw);
struct _ccu_nm _nm;
+ _nm.min_n = 1;
_nm.max_n = 1 << nm->n.width;
+ _nm.min_m = 1;
_nm.max_m = nm->m.max ?: 1 << nm->m.width;
ccu_nm_find_best(*parent_rate, rate, &_nm);
@@ -114,7 +116,9 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
else
ccu_frac_helper_disable(&nm->common, &nm->frac);
+ _nm.min_n = 1;
_nm.max_n = 1 << nm->n.width;
+ _nm.min_m = 1;
_nm.max_m = nm->m.max ?: 1 << nm->m.width;
ccu_nm_find_best(parent_rate, rate, &_nm);
--
2.9.3
^ permalink raw reply related
* [PATCH v3 3/9] clk: sunxi-ng: Finish to convert to structures for arguments
From: Maxime Ripard @ 2016-10-03 8:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161003080913.24197-1-maxime.ripard@free-electrons.com>
Some clocks still use an explicit list of arguments, which make it a bit
more tedious to add new parameters.
Convert those over to a structure pointer argument to add as many
arguments as possible without having to many noise in our patches, or a
very long list of arguments.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi-ng/ccu_mult.c | 28 ++++++++++++++++++++--------
drivers/clk/sunxi-ng/ccu_nk.c | 39 ++++++++++++++++++++++-----------------
2 files changed, 42 insertions(+), 25 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_mult.c b/drivers/clk/sunxi-ng/ccu_mult.c
index 010e9424691d..32a1964439a2 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.c
+++ b/drivers/clk/sunxi-ng/ccu_mult.c
@@ -13,10 +13,20 @@
#include "ccu_gate.h"
#include "ccu_mult.h"
+struct _ccu_mult {
+ unsigned long mult, max;
+};
+
static void ccu_mult_find_best(unsigned long parent, unsigned long rate,
- unsigned int max_n, unsigned int *n)
+ struct _ccu_mult *mult)
{
- *n = rate / parent;
+ int _mult;
+
+ _mult = rate / parent;
+ if (_mult > mult->max)
+ _mult = mult->max;
+
+ mult->mult = _mult;
}
static unsigned long ccu_mult_round_rate(struct ccu_mux_internal *mux,
@@ -25,11 +35,12 @@ static unsigned long ccu_mult_round_rate(struct ccu_mux_internal *mux,
void *data)
{
struct ccu_mult *cm = data;
- unsigned int n;
+ struct _ccu_mult _cm;
- ccu_mult_find_best(parent_rate, rate, 1 << cm->mult.width, &n);
+ _cm.max = 1 << cm->mult.width;
+ ccu_mult_find_best(parent_rate, rate, &_cm);
- return parent_rate * n;
+ return parent_rate * _cm.mult;
}
static void ccu_mult_disable(struct clk_hw *hw)
@@ -83,21 +94,22 @@ static int ccu_mult_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct ccu_mult *cm = hw_to_ccu_mult(hw);
+ struct _ccu_mult _cm;
unsigned long flags;
- unsigned int n;
u32 reg;
ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1,
&parent_rate);
- ccu_mult_find_best(parent_rate, rate, 1 << cm->mult.width, &n);
+ _cm.max = 1 << cm->mult.width;
+ ccu_mult_find_best(parent_rate, rate, &_cm);
spin_lock_irqsave(cm->common.lock, flags);
reg = readl(cm->common.base + cm->common.reg);
reg &= ~GENMASK(cm->mult.width + cm->mult.shift - 1, cm->mult.shift);
- writel(reg | ((n - 1) << cm->mult.shift),
+ writel(reg | ((_cm.mult - 1) << cm->mult.shift),
cm->common.base + cm->common.reg);
spin_unlock_irqrestore(cm->common.lock, flags);
diff --git a/drivers/clk/sunxi-ng/ccu_nk.c b/drivers/clk/sunxi-ng/ccu_nk.c
index d6fafb397489..e7e2e75618ef 100644
--- a/drivers/clk/sunxi-ng/ccu_nk.c
+++ b/drivers/clk/sunxi-ng/ccu_nk.c
@@ -9,21 +9,24 @@
*/
#include <linux/clk-provider.h>
-#include <linux/rational.h>
#include "ccu_gate.h"
#include "ccu_nk.h"
+struct _ccu_nk {
+ unsigned long n, max_n;
+ unsigned long k, max_k;
+};
+
static void ccu_nk_find_best(unsigned long parent, unsigned long rate,
- unsigned int max_n, unsigned int max_k,
- unsigned int *n, unsigned int *k)
+ struct _ccu_nk *nk)
{
unsigned long best_rate = 0;
unsigned int best_k = 0, best_n = 0;
unsigned int _k, _n;
- for (_k = 1; _k <= max_k; _k++) {
- for (_n = 1; _n <= max_n; _n++) {
+ for (_k = 1; _k <= nk->max_k; _k++) {
+ for (_n = 1; _n <= nk->max_n; _n++) {
unsigned long tmp_rate = parent * _n * _k;
if (tmp_rate > rate)
@@ -37,8 +40,8 @@ static void ccu_nk_find_best(unsigned long parent, unsigned long rate,
}
}
- *k = best_k;
- *n = best_n;
+ nk->k = best_k;
+ nk->n = best_n;
}
static void ccu_nk_disable(struct clk_hw *hw)
@@ -89,16 +92,17 @@ static long ccu_nk_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
struct ccu_nk *nk = hw_to_ccu_nk(hw);
- unsigned int n, k;
+ struct _ccu_nk _nk;
if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate *= nk->fixed_post_div;
- ccu_nk_find_best(*parent_rate, rate,
- 1 << nk->n.width, 1 << nk->k.width,
- &n, &k);
+ _nk.max_n = 1 << nk->n.width;
+ _nk.max_k = 1 << nk->k.width;
+
+ ccu_nk_find_best(*parent_rate, rate, &_nk);
+ rate = *parent_rate * _nk.n * _nk.k;
- rate = *parent_rate * n * k;
if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate = rate / nk->fixed_post_div;
@@ -110,15 +114,16 @@ static int ccu_nk_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct ccu_nk *nk = hw_to_ccu_nk(hw);
unsigned long flags;
- unsigned int n, k;
+ struct _ccu_nk _nk;
u32 reg;
if (nk->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate = rate * nk->fixed_post_div;
- ccu_nk_find_best(parent_rate, rate,
- 1 << nk->n.width, 1 << nk->k.width,
- &n, &k);
+ _nk.max_n = 1 << nk->n.width;
+ _nk.max_k = 1 << nk->k.width;
+
+ ccu_nk_find_best(parent_rate, rate, &_nk);
spin_lock_irqsave(nk->common.lock, flags);
@@ -126,7 +131,7 @@ static int ccu_nk_set_rate(struct clk_hw *hw, unsigned long rate,
reg &= ~GENMASK(nk->n.width + nk->n.shift - 1, nk->n.shift);
reg &= ~GENMASK(nk->k.width + nk->k.shift - 1, nk->k.shift);
- writel(reg | ((k - 1) << nk->k.shift) | ((n - 1) << nk->n.shift),
+ writel(reg | ((_nk.k - 1) << nk->k.shift) | ((_nk.n - 1) << nk->n.shift),
nk->common.base + nk->common.reg);
spin_unlock_irqrestore(nk->common.lock, flags);
--
2.9.3
^ permalink raw reply related
* [PATCH v3 2/9] clk: sunxi-ng: Remove the use of rational computations
From: Maxime Ripard @ 2016-10-03 8:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161003080913.24197-1-maxime.ripard@free-electrons.com>
While the rational library works great, it doesn't really allow us to add
more constraints, like the minimum.
Remove that in order to be able to deal with the constraints we'll need.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi-ng/Kconfig | 3 ---
drivers/clk/sunxi-ng/ccu_nkm.c | 31 ++++++++++++-----------
drivers/clk/sunxi-ng/ccu_nkmp.c | 45 +++++++++++++++++-----------------
drivers/clk/sunxi-ng/ccu_nm.c | 54 +++++++++++++++++++++++++++++++----------
4 files changed, 78 insertions(+), 55 deletions(-)
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 254d9526c018..1b4c55a53d7a 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -35,17 +35,14 @@ config SUNXI_CCU_NK
config SUNXI_CCU_NKM
bool
- select RATIONAL
select SUNXI_CCU_GATE
config SUNXI_CCU_NKMP
bool
- select RATIONAL
select SUNXI_CCU_GATE
config SUNXI_CCU_NM
bool
- select RATIONAL
select SUNXI_CCU_FRAC
select SUNXI_CCU_GATE
diff --git a/drivers/clk/sunxi-ng/ccu_nkm.c b/drivers/clk/sunxi-ng/ccu_nkm.c
index 059fdc3b4f96..0b08d000eb38 100644
--- a/drivers/clk/sunxi-ng/ccu_nkm.c
+++ b/drivers/clk/sunxi-ng/ccu_nkm.c
@@ -9,7 +9,6 @@
*/
#include <linux/clk-provider.h>
-#include <linux/rational.h>
#include "ccu_gate.h"
#include "ccu_nkm.h"
@@ -28,21 +27,21 @@ static void ccu_nkm_find_best(unsigned long parent, unsigned long rate,
unsigned long _n, _k, _m;
for (_k = 1; _k <= nkm->max_k; _k++) {
- unsigned long tmp_rate;
-
- rational_best_approximation(rate / _k, parent,
- nkm->max_n, nkm->max_m, &_n, &_m);
-
- tmp_rate = parent * _n * _k / _m;
-
- if (tmp_rate > rate)
- continue;
-
- if ((rate - tmp_rate) < (rate - best_rate)) {
- best_rate = tmp_rate;
- best_n = _n;
- best_k = _k;
- best_m = _m;
+ for (_n = 1; _n <= nkm->max_n; _n++) {
+ for (_m = 1; _n <= nkm->max_m; _m++) {
+ unsigned long tmp_rate;
+
+ tmp_rate = parent * _n * _k / _m;
+
+ if (tmp_rate > rate)
+ continue;
+ if ((rate - tmp_rate) < (rate - best_rate)) {
+ best_rate = tmp_rate;
+ best_n = _n;
+ best_k = _k;
+ best_m = _m;
+ }
+ }
}
}
diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.c b/drivers/clk/sunxi-ng/ccu_nkmp.c
index 9769dee99511..4b457d8cce11 100644
--- a/drivers/clk/sunxi-ng/ccu_nkmp.c
+++ b/drivers/clk/sunxi-ng/ccu_nkmp.c
@@ -9,16 +9,15 @@
*/
#include <linux/clk-provider.h>
-#include <linux/rational.h>
#include "ccu_gate.h"
#include "ccu_nkmp.h"
struct _ccu_nkmp {
- unsigned long n, max_n;
- unsigned long k, max_k;
- unsigned long m, max_m;
- unsigned long p, max_p;
+ unsigned long n, min_n, max_n;
+ unsigned long k, min_k, max_k;
+ unsigned long m, min_m, max_m;
+ unsigned long p, min_p, max_p;
};
static void ccu_nkmp_find_best(unsigned long parent, unsigned long rate,
@@ -29,24 +28,24 @@ static void ccu_nkmp_find_best(unsigned long parent, unsigned long rate,
unsigned long _n, _k, _m, _p;
for (_k = 1; _k <= nkmp->max_k; _k++) {
- for (_p = 1; _p <= nkmp->max_p; _p <<= 1) {
- unsigned long tmp_rate;
-
- rational_best_approximation(rate / _k, parent / _p,
- nkmp->max_n, nkmp->max_m,
- &_n, &_m);
-
- tmp_rate = parent * _n * _k / (_m * _p);
-
- if (tmp_rate > rate)
- continue;
-
- if ((rate - tmp_rate) < (rate - best_rate)) {
- best_rate = tmp_rate;
- best_n = _n;
- best_k = _k;
- best_m = _m;
- best_p = _p;
+ for (_n = 1; _n <= nkm->max_n; _n++) {
+ for (_m = 1; _n <= nkm->max_m; _m++) {
+ for (_p = 1; _p <= nkmp->max_p; _p <<= 1) {
+ unsigned long tmp_rate;
+
+ tmp_rate = parent * _n * _k / (_m * _p);
+
+ if (tmp_rate > rate)
+ continue;
+
+ if ((rate - tmp_rate) < (rate - best_rate)) {
+ best_rate = tmp_rate;
+ best_n = _n;
+ best_k = _k;
+ best_m = _m;
+ best_p = _p;
+ }
+ }
}
}
}
diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
index b61bdd8c7a7f..c6d652289320 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.c
+++ b/drivers/clk/sunxi-ng/ccu_nm.c
@@ -9,12 +9,42 @@
*/
#include <linux/clk-provider.h>
-#include <linux/rational.h>
#include "ccu_frac.h"
#include "ccu_gate.h"
#include "ccu_nm.h"
+struct _ccu_nm {
+ unsigned long n, max_n;
+ unsigned long m, max_m;
+};
+
+static void ccu_nm_find_best(unsigned long parent, unsigned long rate,
+ struct _ccu_nm *nm)
+{
+ unsigned long best_rate = 0;
+ unsigned long best_n = 0, best_m = 0;
+ unsigned long _n, _m;
+
+ for (_n = 1; _n <= nm->max_n; _n++) {
+ for (_m = 1; _n <= nm->max_m; _m++) {
+ unsigned long tmp_rate = parent * _n / _m;
+
+ if (tmp_rate > rate)
+ continue;
+
+ if ((rate - tmp_rate) < (rate - best_rate)) {
+ best_rate = tmp_rate;
+ best_n = _n;
+ best_m = _m;
+ }
+ }
+ }
+
+ nm->n = best_n;
+ nm->m = best_m;
+}
+
static void ccu_nm_disable(struct clk_hw *hw)
{
struct ccu_nm *nm = hw_to_ccu_nm(hw);
@@ -61,24 +91,22 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
struct ccu_nm *nm = hw_to_ccu_nm(hw);
- unsigned long max_n, max_m;
- unsigned long n, m;
+ struct _ccu_nm _nm;
- max_n = 1 << nm->n.width;
- max_m = nm->m.max ?: 1 << nm->m.width;
+ _nm.max_n = 1 << nm->n.width;
+ _nm.max_m = nm->m.max ?: 1 << nm->m.width;
- rational_best_approximation(rate, *parent_rate, max_n, max_m, &n, &m);
+ ccu_nm_find_best(*parent_rate, rate, &_nm);
- return *parent_rate * n / m;
+ return *parent_rate * _nm.n / _nm.m;
}
static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct ccu_nm *nm = hw_to_ccu_nm(hw);
+ struct _ccu_nm _nm;
unsigned long flags;
- unsigned long max_n, max_m;
- unsigned long n, m;
u32 reg;
if (ccu_frac_helper_has_rate(&nm->common, &nm->frac, rate))
@@ -86,10 +114,10 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
else
ccu_frac_helper_disable(&nm->common, &nm->frac);
- max_n = 1 << nm->n.width;
- max_m = nm->m.max ?: 1 << nm->m.width;
+ _nm.max_n = 1 << nm->n.width;
+ _nm.max_m = nm->m.max ?: 1 << nm->m.width;
- rational_best_approximation(rate, parent_rate, max_n, max_m, &n, &m);
+ ccu_nm_find_best(parent_rate, rate, &_nm);
spin_lock_irqsave(nm->common.lock, flags);
@@ -97,7 +125,7 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
reg &= ~GENMASK(nm->n.width + nm->n.shift - 1, nm->n.shift);
reg &= ~GENMASK(nm->m.width + nm->m.shift - 1, nm->m.shift);
- writel(reg | ((m - 1) << nm->m.shift) | ((n - 1) << nm->n.shift),
+ writel(reg | ((_nm.m - 1) << nm->m.shift) | ((_nm.n - 1) << nm->n.shift),
nm->common.base + nm->common.reg);
spin_unlock_irqrestore(nm->common.lock, flags);
--
2.9.3
^ permalink raw reply related
* [PATCH v3 1/9] clk: sunxi-ng: Rename the internal structures
From: Maxime Ripard @ 2016-10-03 8:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161003080913.24197-1-maxime.ripard@free-electrons.com>
Rename the structures meant to be embedded in other structures to make it
consistent with the mux structure name
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/clk/sunxi-ng/ccu_div.h | 6 +++---
drivers/clk/sunxi-ng/ccu_frac.c | 12 ++++++------
drivers/clk/sunxi-ng/ccu_frac.h | 14 +++++++-------
drivers/clk/sunxi-ng/ccu_mp.h | 4 ++--
drivers/clk/sunxi-ng/ccu_mult.h | 4 ++--
drivers/clk/sunxi-ng/ccu_nk.h | 4 ++--
drivers/clk/sunxi-ng/ccu_nkm.h | 6 +++---
drivers/clk/sunxi-ng/ccu_nkmp.h | 8 ++++----
drivers/clk/sunxi-ng/ccu_nm.h | 6 +++---
9 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
index 34c338832c0d..06540f7cf41c 100644
--- a/drivers/clk/sunxi-ng/ccu_div.h
+++ b/drivers/clk/sunxi-ng/ccu_div.h
@@ -20,7 +20,7 @@
#include "ccu_mux.h"
/**
- * struct _ccu_div - Internal divider description
+ * struct ccu_div_internal - Internal divider description
* @shift: Bit offset of the divider in its register
* @width: Width of the divider field in its register
* @max: Maximum value allowed for that divider. This is the
@@ -36,7 +36,7 @@
* It is basically a wrapper around the clk_divider functions
* arguments.
*/
-struct _ccu_div {
+struct ccu_div_internal {
u8 shift;
u8 width;
@@ -78,7 +78,7 @@ struct _ccu_div {
struct ccu_div {
u32 enable;
- struct _ccu_div div;
+ struct ccu_div_internal div;
struct ccu_mux_internal mux;
struct ccu_common common;
};
diff --git a/drivers/clk/sunxi-ng/ccu_frac.c b/drivers/clk/sunxi-ng/ccu_frac.c
index 5c4b10cd15b5..8b5eb7756bf7 100644
--- a/drivers/clk/sunxi-ng/ccu_frac.c
+++ b/drivers/clk/sunxi-ng/ccu_frac.c
@@ -14,7 +14,7 @@
#include "ccu_frac.h"
bool ccu_frac_helper_is_enabled(struct ccu_common *common,
- struct _ccu_frac *cf)
+ struct ccu_frac_internal *cf)
{
if (!(common->features & CCU_FEATURE_FRACTIONAL))
return false;
@@ -23,7 +23,7 @@ bool ccu_frac_helper_is_enabled(struct ccu_common *common,
}
void ccu_frac_helper_enable(struct ccu_common *common,
- struct _ccu_frac *cf)
+ struct ccu_frac_internal *cf)
{
unsigned long flags;
u32 reg;
@@ -38,7 +38,7 @@ void ccu_frac_helper_enable(struct ccu_common *common,
}
void ccu_frac_helper_disable(struct ccu_common *common,
- struct _ccu_frac *cf)
+ struct ccu_frac_internal *cf)
{
unsigned long flags;
u32 reg;
@@ -53,7 +53,7 @@ void ccu_frac_helper_disable(struct ccu_common *common,
}
bool ccu_frac_helper_has_rate(struct ccu_common *common,
- struct _ccu_frac *cf,
+ struct ccu_frac_internal *cf,
unsigned long rate)
{
if (!(common->features & CCU_FEATURE_FRACTIONAL))
@@ -63,7 +63,7 @@ bool ccu_frac_helper_has_rate(struct ccu_common *common,
}
unsigned long ccu_frac_helper_read_rate(struct ccu_common *common,
- struct _ccu_frac *cf)
+ struct ccu_frac_internal *cf)
{
u32 reg;
@@ -84,7 +84,7 @@ unsigned long ccu_frac_helper_read_rate(struct ccu_common *common,
}
int ccu_frac_helper_set_rate(struct ccu_common *common,
- struct _ccu_frac *cf,
+ struct ccu_frac_internal *cf,
unsigned long rate)
{
unsigned long flags;
diff --git a/drivers/clk/sunxi-ng/ccu_frac.h b/drivers/clk/sunxi-ng/ccu_frac.h
index e4c670b1cdfe..7b1ee380156f 100644
--- a/drivers/clk/sunxi-ng/ccu_frac.h
+++ b/drivers/clk/sunxi-ng/ccu_frac.h
@@ -18,7 +18,7 @@
#include "ccu_common.h"
-struct _ccu_frac {
+struct ccu_frac_internal {
u32 enable;
u32 select;
@@ -33,21 +33,21 @@ struct _ccu_frac {
}
bool ccu_frac_helper_is_enabled(struct ccu_common *common,
- struct _ccu_frac *cf);
+ struct ccu_frac_internal *cf);
void ccu_frac_helper_enable(struct ccu_common *common,
- struct _ccu_frac *cf);
+ struct ccu_frac_internal *cf);
void ccu_frac_helper_disable(struct ccu_common *common,
- struct _ccu_frac *cf);
+ struct ccu_frac_internal *cf);
bool ccu_frac_helper_has_rate(struct ccu_common *common,
- struct _ccu_frac *cf,
+ struct ccu_frac_internal *cf,
unsigned long rate);
unsigned long ccu_frac_helper_read_rate(struct ccu_common *common,
- struct _ccu_frac *cf);
+ struct ccu_frac_internal *cf);
int ccu_frac_helper_set_rate(struct ccu_common *common,
- struct _ccu_frac *cf,
+ struct ccu_frac_internal *cf,
unsigned long rate);
#endif /* _CCU_FRAC_H_ */
diff --git a/drivers/clk/sunxi-ng/ccu_mp.h b/drivers/clk/sunxi-ng/ccu_mp.h
index edf9215ea8cc..915625e97d98 100644
--- a/drivers/clk/sunxi-ng/ccu_mp.h
+++ b/drivers/clk/sunxi-ng/ccu_mp.h
@@ -29,8 +29,8 @@
struct ccu_mp {
u32 enable;
- struct _ccu_div m;
- struct _ccu_div p;
+ struct ccu_div_internal m;
+ struct ccu_div_internal p;
struct ccu_mux_internal mux;
struct ccu_common common;
};
diff --git a/drivers/clk/sunxi-ng/ccu_mult.h b/drivers/clk/sunxi-ng/ccu_mult.h
index 5d2c8dc14073..113780b7558e 100644
--- a/drivers/clk/sunxi-ng/ccu_mult.h
+++ b/drivers/clk/sunxi-ng/ccu_mult.h
@@ -4,7 +4,7 @@
#include "ccu_common.h"
#include "ccu_mux.h"
-struct _ccu_mult {
+struct ccu_mult_internal {
u8 shift;
u8 width;
};
@@ -18,7 +18,7 @@ struct _ccu_mult {
struct ccu_mult {
u32 enable;
- struct _ccu_mult mult;
+ struct ccu_mult_internal mult;
struct ccu_mux_internal mux;
struct ccu_common common;
};
diff --git a/drivers/clk/sunxi-ng/ccu_nk.h b/drivers/clk/sunxi-ng/ccu_nk.h
index 4b52da0c29fe..437836b80696 100644
--- a/drivers/clk/sunxi-ng/ccu_nk.h
+++ b/drivers/clk/sunxi-ng/ccu_nk.h
@@ -30,8 +30,8 @@ struct ccu_nk {
u32 enable;
u32 lock;
- struct _ccu_mult n;
- struct _ccu_mult k;
+ struct ccu_mult_internal n;
+ struct ccu_mult_internal k;
unsigned int fixed_post_div;
diff --git a/drivers/clk/sunxi-ng/ccu_nkm.h b/drivers/clk/sunxi-ng/ccu_nkm.h
index 35493fddd8ab..34580894f4d1 100644
--- a/drivers/clk/sunxi-ng/ccu_nkm.h
+++ b/drivers/clk/sunxi-ng/ccu_nkm.h
@@ -29,9 +29,9 @@ struct ccu_nkm {
u32 enable;
u32 lock;
- struct _ccu_mult n;
- struct _ccu_mult k;
- struct _ccu_div m;
+ struct ccu_mult_internal n;
+ struct ccu_mult_internal k;
+ struct ccu_div_internal m;
struct ccu_mux_internal mux;
struct ccu_common common;
diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.h b/drivers/clk/sunxi-ng/ccu_nkmp.h
index 5adb0c92a614..a82facbc6144 100644
--- a/drivers/clk/sunxi-ng/ccu_nkmp.h
+++ b/drivers/clk/sunxi-ng/ccu_nkmp.h
@@ -29,10 +29,10 @@ struct ccu_nkmp {
u32 enable;
u32 lock;
- struct _ccu_mult n;
- struct _ccu_mult k;
- struct _ccu_div m;
- struct _ccu_div p;
+ struct ccu_mult_internal n;
+ struct ccu_mult_internal k;
+ struct ccu_div_internal m;
+ struct ccu_div_internal p;
struct ccu_common common;
};
diff --git a/drivers/clk/sunxi-ng/ccu_nm.h b/drivers/clk/sunxi-ng/ccu_nm.h
index 0b7bcd33a2df..e87fd186da78 100644
--- a/drivers/clk/sunxi-ng/ccu_nm.h
+++ b/drivers/clk/sunxi-ng/ccu_nm.h
@@ -30,9 +30,9 @@ struct ccu_nm {
u32 enable;
u32 lock;
- struct _ccu_mult n;
- struct _ccu_div m;
- struct _ccu_frac frac;
+ struct ccu_mult_internal n;
+ struct ccu_div_internal m;
+ struct ccu_frac_internal frac;
struct ccu_common common;
};
--
2.9.3
^ permalink raw reply related
* [PATCH v3 0/9] arm64: Allwinner A64 support based on sunxi-ng
From: Maxime Ripard @ 2016-10-03 8:09 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
As it was in the first iteration, this is the A64 support based on the
new sunxi-ng clock framework.
The support for it is quite minimal at the moment, but it should be
fairly easy to add new devices, as most of the design is shared with
older SoCs.
Let me know what you think,
Maxime
Changes from v2:
- Added pull-ups on the Pine64 i2c bus
- Removed the PMU since it doesn't work
- Refactored the sunxi-ng framework to deal with the specifities of
the A64 CCU, especially in terms of minimum factors.
- Fixed a few things in the CCU driver: added CLK_SET_RATE PARENT
flags, fixed some mux width, etc.
- Converted the CCU driver to a platform driver
- Added the DRAM reset line
- Added IDs for the USB muxes (even though we're not using them yet)
Changes from v1:
- Split the A64 CCU support out of the H3 driver
- Added the PMU support
- Removed the clocks node
- Rebased on top of current sunxi/clk-for-4.9 branch
Andre Przywara (3):
arm64: dts: add Allwinner A64 SoC .dtsi
Documentation: devicetree: add vendor prefix for Pine64
arm64: dts: add Pine64 support
Maxime Ripard (6):
clk: sunxi-ng: Rename the internal structures
clk: sunxi-ng: Remove the use of rational computations
clk: sunxi-ng: Finish to convert to structures for arguments
clk: sunxi-ng: Add minimums for all the relevant structures and clocks
clk: sunxi-ng: Implement minimum for multipliers
clk: sunxi-ng: Add A64 clocks
Documentation/devicetree/bindings/arm/sunxi.txt | 1 +
.../devicetree/bindings/clock/sunxi-ccu.txt | 1 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 1 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/allwinner/Makefile | 5 +
.../boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 50 ++
.../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 74 ++
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 263 ++++++
drivers/clk/sunxi-ng/Kconfig | 14 +-
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 918 +++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun50i-a64.h | 72 ++
drivers/clk/sunxi-ng/ccu_div.h | 6 +-
drivers/clk/sunxi-ng/ccu_frac.c | 12 +-
drivers/clk/sunxi-ng/ccu_frac.h | 14 +-
drivers/clk/sunxi-ng/ccu_mp.h | 4 +-
drivers/clk/sunxi-ng/ccu_mult.c | 33 +-
drivers/clk/sunxi-ng/ccu_mult.h | 17 +-
drivers/clk/sunxi-ng/ccu_nk.c | 43 +-
drivers/clk/sunxi-ng/ccu_nk.h | 4 +-
drivers/clk/sunxi-ng/ccu_nkm.c | 45 +-
drivers/clk/sunxi-ng/ccu_nkm.h | 6 +-
drivers/clk/sunxi-ng/ccu_nkmp.c | 55 +-
drivers/clk/sunxi-ng/ccu_nkmp.h | 8 +-
drivers/clk/sunxi-ng/ccu_nm.c | 58 +-
drivers/clk/sunxi-ng/ccu_nm.h | 6 +-
include/dt-bindings/clock/sun50i-a64-ccu.h | 134 +++
include/dt-bindings/reset/sun50i-a64-ccu.h | 98 +++
29 files changed, 1824 insertions(+), 121 deletions(-)
create mode 100644 arch/arm64/boot/dts/allwinner/Makefile
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a64.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a64.h
create mode 100644 include/dt-bindings/clock/sun50i-a64-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-a64-ccu.h
--
2.9.3
^ permalink raw reply
* [1/3] Revert "ACPI,PCI,IRQ: reduce static IRQ array size to 16"
From: Jonathan Liu @ 2016-10-03 8:03 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <bf16b077-603f-bc7e-cd7b-bf006242f781@codeaurora.org>
On 3 October 2016 at 12:07, Sinan Kaya <okaya@codeaurora.org> wrote:
> On 10/2/2016 7:40 AM, Jonathan Liu wrote:
>> This series fixes one or more network adapters in VirtualBox not
>> working with Linux 32-bit x86 guest if I have 4 network adapters
>> enabled. The following message no longer appears in the kernel log:
>> ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off
>>
>> Tested-by: Jonathan Liu <net147@gmail.com>
>
> Thanks for the test. I didn't realize that VirtualBox was broken too.
I am running VirtualBox on Windows 7 64-bit host with Linux guest. The
problem occurs in the Linux guest.
>
> So far I got some random test results in the mail list that something
> is broken. I hope to hear more that we close the issue for some time
> now.
>
> The IRQ stuff got broken three times already. Hopefully, this will be
> the seal.
^ permalink raw reply
* [PATCH v26 0/7] arm64: add kdump support
From: Manish Jaggi @ 2016-10-03 7:54 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20160907042908.6232-1-takahiro.akashi@linaro.org>
Hi Akashi,
On 09/07/2016 09:59 AM, AKASHI Takahiro wrote:
> v26-specific note: After a comment from Rob[0], an idea of adding
> "linux,usable-memory-range" was dropped. Instead, an existing
> "reserved-memory" node will be used to limit usable memory ranges
> on crash dump kernel.
> This works not only on UEFI/ACPI systems but also on DT-only systems,
> but if he really insists on using DT-specific "usable-memory" property,
> I will post additional patches for kexec-tools. Those would be
> redundant, though.
> Even in that case, the kernel will not have to be changed.
>
> This patch series adds kdump support on arm64.
> There are some prerequisite patches [1],[2].
>
> To load a crash-dump kernel to the systems, a series of patches to
> kexec-tools, which have not yet been merged upstream, are needed.
> Please always use my latest kdump patches, v3 [3].
>
> To examine vmcore (/proc/vmcore) on a crash-dump kernel, you can use
> - crash utility (coming v7.1.6 or later) [4]
> (Necessary patches have already been queued in the master.)
>
>
> [0] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-August/452582.html
> [1] "arm64: mark reserved memblock regions explicitly in iomem"
> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-August/450433.html
> [2] "efi: arm64: treat regions with WT/WC set but WB cleared as memory"
> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-August/451491.html
> [3] T.B.D.
> [4] https://github.com/crash-utility/crash.git
>
With the v26 kdump and v3 kexec-tools and top of tree crash.git, below are the tests done
Attached is a patch in crash.git (symbols.c) to make crash utility work on my setup.
Can you please have a look and provide your comments.
To generate a panic, i have a kernel module which on init calls panic.
Observations:
1.1. Dump capture kernel shows different memory map.
---------------------------------------------------
In dump capture kernel /proc/meminfo and /proc/iomem differ
root at arm64:/home/ubuntu/CODE/crash#
MemTotal: 65882432 kB
MemFree: 65507136 kB
MemAvailable: 60373632 kB
Buffers: 29248 kB
Cached: 46720 kB
SwapCached: 0 kB
Active: 63872 kB
Inactive: 19776 kB
Active(anon): 8256 kB
Inactive(anon): 7616 kB
First kernel is booted with mem=2G crashkernel=1G command line option.
While the system has 64G memory.
root at arm64:/home/ubuntu/CODE/crash# cat /proc/iomem
41400000-fffeffff : System RAM
41480000-420cffff : Kernel code
42490000-4278ffff : Kernel data
ffff0000-ffffffff : reserved
100000000-ffaa7ffff : System RAM
ffaa80000-ffaabffff : reserved
ffaac0000-fffa6ffff : System RAM
fffa70000-fffacffff : reserved
fffad0000-fffffffff : System RAM
1.2 Live crash dump fails with error
--------------------------------------
$crash vmlinux
crash 7.1.5++
Copyright (C) 2002-2016 Red Hat, Inc.
Copyright (C) 2004, 2005, 2006, 2010 IBM Corporation
Copyright (C) 1999-2006 Hewlett-Packard Co
Copyright (C) 2005, 2006, 2011, 2012 Fujitsu Limited
Copyright (C) 2006, 2007 VA Linux Systems Japan K.K.
Copyright (C) 2005, 2011 NEC Corporation
Copyright (C) 1999, 2002, 2007 Silicon Graphics, Inc.
Copyright (C) 1999, 2000, 2001, 2002 Mission Critical Linux, Inc.
This program is free software, covered by the GNU General Public License,
and you are welcome to change it and/or distribute copies of it under
certain conditions. Enter "help copying" to see the conditions.
This program has absolutely no warranty. Enter "help warranty" for details.
GNU gdb (GDB) 7.6
Copyright (C) 2013 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "aarch64-unknown-linux-gnu"...
crash: read error: kernel virtual address: ffff800ffffffcc0 type: "pglist node_id"
Observation 2
------------
If saved vmcore file is used
$crash vmlinux vmcore_saved
Got the below error.
please wait... (gathering module symbol data)crash: malloc.c:2846: mremap_chunk: Assertion `((size + offset) & (_rtld_global_ro._dl_pagesize - 1)) == 0' failed.
Aborted
Experiment 3
------------
If crash.git is modified with a hack patch in symbols.c. Crash utility works fine log, bt commands work.
-------------------
Patch: symbols.c
git diff symbols.c
diff --git a/symbols.c b/symbols.c
index 13282f4..f7c6cac 100644
--- a/symbols.c
+++ b/symbols.c
@@ -2160,6 +2160,7 @@ store_module_kallsyms_v2(struct load_module *lm, int start
FREEBUF(module_buf);
return 0;
}
+ lm->mod_init_size = 0;
if (lm->mod_init_size > 0) {
module_buf_init = GETBUF(lm->mod_init_size);
------------------
$ crash vmlinux vmcore_saved
KERNEL: /home/ubuntu/CODE/linux/vmlinux
DUMPFILE: vm
CPUS: 48 [OFFLINE: 46]
DATE: Mon Oct 3 00:11:47 2016
UPTIME: 00:02:41
LOAD AVERAGE: 0.36, 0.14, 0.05
TASKS: 171
NODENAME: arm64
RELEASE: 4.8.0-rc3-00044-g070a615-dirty
VERSION: #63 SMP Sat Oct 1 01:39:45 PDT 2016
MACHINE: aarch64 (unknown Mhz)
MEMORY: 2 GB
PANIC: "Kernel panic - not syncing: crash module starting"
PID: 958
COMMAND: "insmod"
TASK: ffff800007859300 [THREAD_INFO: ffff80000c940000]
CPU: 0
STATE: TASK_RUNNING (PANIC)
crash> bt
PID: 958 TASK: ffff800007859300 CPU: 0 COMMAND: "insmod"
#0 [ffff80000c943980] __crash_kexec at ffff000008144fe8
#1 [ffff80000c943ae0] panic at ffff0000081ae704
#2 [ffff80000c943ba0] init_module at ffff000000900014 [crash]
#3 [ffff80000c943bb0] do_one_initcall at ffff000008083bb4
#4 [ffff80000c943c40] do_init_module at ffff0000081af6f0
#5 [ffff80000c943c70] load_module at ffff000008140b7c
#6 [ffff80000c943e10] sys_finit_module at ffff000008141634
#7 [ffff80000c943ed0] el0_svc_naked at ffff0000080833ec
PC: 00000003 LR: ffffaca050a0 SP: ffffaca865a0 PSTATE: 00000111
X12: ffffac941a5c X11: 00000080 X10: 00000004 X9: 00000030
X8: ffffffff X7: fefefefefefeff40 X6: 00000111 X5: 00000001
X4: 00000001 X3: 0002ed61 X2: 00000000 X1: 00000003
X0: 00000000
crash>
---
Thanks,
manish
^ permalink raw reply related
* [GIT PULL 1/3] ARM: soc: exynos: Drivers for v4.9
From: Krzysztof Kozlowski @ 2016-10-03 7:48 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CAOesGMgSu=bfVwWYkEG0+eDKBxh_zqSM0uxFAq3Y3X-O0vLGKQ@mail.gmail.com>
On Sun, Oct 02, 2016 at 05:25:07PM -0700, Olof Johansson wrote:
> On Mon, Sep 19, 2016 at 8:53 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > On Mon, Sep 19, 2016 at 05:02:40PM +0200, Arnd Bergmann wrote:
> >> On Sunday, September 18, 2016 6:39:46 PM CEST Krzysztof Kozlowski wrote:
> >> > Samsung drivers/soc update for v4.9:
> >> > 1. Allow compile testing of exynos-mct clocksource driver on ARM64.
> >> > 2. Document Exynos5433 PMU compatible (already used by clkout driver and more
> >> > will be coming soon).
> >>
> >> Pulled into next/drivers, thanks
> >>
> >> Just for my understanding: why do we need the exynos-mct driver on ARM64
> >> but not the delay-timer portion of it?
> >
> > I think we want all of it but Doug's optimization 3252a646aa2c
> > ("clocksource: exynos_mct: Only use 32-bits where possible") is not
> > ARM64 friendly. One way of dealing with it would be to prepare two
> > versions of exynos4_read_current_timer(). One reading only lower 32-bit
> > value for ARMv7 and second (slow) reading lower and upper for ARMv8.
> >
> >>
> >> Is there an advantage in using MCT over the architected timer on these
> >> chips? If so, should we also have a way to use it as the delay timer?
> >
> > No, there is no real advantage... except that the SoC has some
> > interesting "characteristics"... The timers are tightly coupled. Very
> > tightly. I spent a lot of time and failed to boot my ARMv8 board without
> > some MCT magic.
>
> What kind of magic is that?
Most notably: the arch timer starts when MCT forward running counter
starts. Without kicking MCT, the arch timer seems to be frozen.
> I can understand that needing the MCT for
> some system-level timer functionality might be true (wakeups, etc),
> but for system timesource avoiding the MMIO timer and using the arch
> ones is a substantial performance improvement for gettimeofday() and
> friends.
>
> There was extensive discussion last year over using arch timers on
> 5420/5422, and it fizzled out with vague comments about something not
> working right between A15/A7 on b.L. hardware. I'm presuming whatever
> implementation details of that SoC has since been fixed on later chips
> (including v8). Any chance you can confirm? It'd be very nice to leave
> MCT behind on v8 as a system time source.
Unfortunately, I cannot confirm this, at least on Exynos5433 (ARMv8). I
played with arch and MCT timers on it and failed to get the
arch-timer-only setup working. I did not have access to newer Exynos
designs (Exynos 7) so I do not know how it works there.
Best regards,
Krzysztof
^ permalink raw reply
* [PATCH 6/6] ARM: da850: adjust memory settings for tilcdc
From: Peter Ujfalusi @ 2016-10-03 7:13 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <948c3f9e-f11b-092c-e002-e2ef4436197f@ti.com>
On 10/01/16 12:24, Sekhar Nori wrote:
>> That's good to hear, but I think the priorities should be set:
>> LCDC and EDMA30TC1 to highest priority
>> EDMA30TC0 to priority 2
>>
>> The 0TC0 is used by MMC and if you want to play a video you might need the
>> servicing TC to be higher priority then other masters.
>>
>> If audio playback would trigger sync losts in lcdc then we might need to move
>> 0TC1 to priority 1.
>>
>> I agree that LCDC priority needs to be higher, but I do wonder why the default
>> (5) is not working and if it is not working why it is 5...
>>
>> My guess is that the change in the PBBPR register is the one actually helping
>> here.
>
> Good point, Peter. If you are booting off NFS and not playing any audio,
> then there is pretty much no EDMA generated traffic on the interconnect.
Yes, this is my understanding as well.
> I would guess too that its the PBBPR setting that is making a
> difference. The EDMA vs LCDC priority adjustment might be needed in
> particular situations too, but specific experiments should be done to
> narrow down on that being the cause.
True, we can use some conservative values for the priority, but the PBBPR
register for sure needs to be updated.
> In any case, to configure the PBBR, you will have to introduce a driver
> for it in drivers/memory. Then you can set it up per board using a DT
> parameter.
and we can reuse the introduced bindings for am335x and OMAP1/2 as well. On
OMAP the legacy DMA API provided a call to raise the priority of the sDMA in
EMIF :o That needs to be removed and replaced.
--
P?ter
^ permalink raw reply
* [PATCH v3 2/2] ARM64: dts: bcm: Use a symlink to R-Pi dtsi files from arch=arm
From: Olof Johansson @ 2016-10-03 5:57 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1471516926-11466-2-git-send-email-ijc@hellion.org.uk>
On Thu, Aug 18, 2016 at 11:42:06AM +0100, Ian Campbell wrote:
> The ../../../arm... style cross-references added by commit 9d56c22a7861
> ("ARM: bcm2835: Add devicetree for the Raspberry Pi 3.") do not work in the
> context of the split device-tree repository[0] (where the directory
> structure differs). As with commit 8ee57b8182c4 ("ARM64: dts: vexpress: Use
> a symlink to vexpress-v2m-rs1.dtsi from arch=arm") use symlinks instead.
>
> [0] https://git.kernel.org/cgit/linux/kernel/git/devicetree/devicetree-rebasing.git/
>
> Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
> Acked-by: Mark Rutland <mark.rutland@arm.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Frank Rowand <frowand.list@gmail.com>
> Cc: Eric Anholt <eric@anholt.net>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Lee Jones <lee@kernel.org>
> Cc: Gerd Hoffmann <kraxel@redhat.com>
> Cc: devicetree at vger.kernel.org
> Cc: linux-kernel at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-rpi-kernel at lists.infradead.org
> Cc: arm at kernel.org
> ---
> v2: No more need for skeleton.dtsi since this was cleaned up in the previous
> patch
> v3: Collected tags
Hi,
I still think this is fundamentally the wrong approach. We shouldn't have
created these file links in the first place.
I'd rather have something like this in our tree:
arch/arm64/boot/dts/include/arm -> ../../../../arm/boot/dts
arch/arm64/boot/dts/include/arm64 -> ../..
arch/arm/boot/dts/include/arm64 -> ../../../../arm64/boot/dts
arch/arm/boot/dts/include/arm -> ../..
That way you can include by using <arm/bcm2835-rpi.dtsi> instead.
You'll populate another (or the same) directory with links as appropriate
in your out-of-tree version of the DT contents.
No more symlinked files, and still a clear way of showing that you're
referencing contents out of the other architecture.
Considerably cleaner, isn't it?
-Olof
^ permalink raw reply
* [PATCH V3 2/2] PCI: handle CRS returned by device after FLR
From: Sinan Kaya @ 2016-10-03 5:37 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1475473021-14251-1-git-send-email-okaya@codeaurora.org>
An endpoint is allowed to issue CRS following an FLR request to indicate
that it is not ready to accept new requests. Changing the polling mechanism
in FLR wait function to go read the vendor ID instead of the command/status
register. A CRS indication will only be given if the address to be read is
vendor ID.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/pci/pci.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index c8749b9..7580b00 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3725,7 +3725,8 @@ static void pci_flr_wait(struct pci_dev *dev)
do {
msleep(100);
- pci_read_config_dword(dev, PCI_COMMAND, &id);
+ pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, &id,
+ 60 * 1000);
} while (i++ < 10 && id == ~0);
if (id == ~0)
--
1.9.1
^ permalink raw reply related
* [PATCH V3 1/2] PCI: add CRS support to error handling path
From: Sinan Kaya @ 2016-10-03 5:36 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1475473021-14251-1-git-send-email-okaya@codeaurora.org>
The PCIE spec allows an endpoint device to extend the initialization time
beyond 1 second by issuing Configuration Request Retry Status (CRS) for a
vendor ID read request.
This basically means "I'm busy now, please call me back later".
There are two moving parts to CRS support from the SW perspective. One part
is to determine if CRS is supported or not. The second part is to set the
CRS visibility register.
As part of the probe, the Linux kernel sets the above two conditions in
pci_enable_crs function. The kernel is also honoring the returned CRS in
pci_bus_read_dev_vendor_id function if supported. The function will poll up
to specified amount of time while endpoint is returning CRS response.
The PCIe spec also allows CRS to be issued during cold, warm, hot and FLR
resets.
The hot reset is initiated by starting a secondary bus reset. A bus/device
restore follows the reset. This patch is adding vendor ID read into dev
restore function to validate that the device is accessible before writing
the register contents. If the device issues CRS, the code might poll up
to 60 seconds.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/pci/pci.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index aab9d51..c8749b9 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4020,6 +4020,12 @@ static void pci_dev_save_and_disable(struct pci_dev *dev)
static void pci_dev_restore(struct pci_dev *dev)
{
+ u32 l;
+
+ /* see if the device is accessible first */
+ if (!pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, &l, 60 * 1000))
+ return;
+
pci_restore_state(dev);
pci_reset_notify(dev, false);
}
--
1.9.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox