* [PATCH v21 4/9] fpga-mgr: add fpga image information struct
From: Alan Tull @ 2016-10-25 14:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161025145540.3722-1-atull@opensource.altera.com>
This patch adds a minor change in the FPGA Manager API
to hold information that is specific to an FPGA image
file. This change is expected to bring little, if any,
pain. The socfpga and zynq drivers are fixed up in
this patch.
An FPGA image file will have particulars that affect how the
image is programmed to the FPGA. One example is that
current 'flags' currently has one bit which shows whether the
FPGA image was built for full reconfiguration or partial
reconfiguration. Another example is timeout values for
enabling or disabling the bridges in the FPGA. As the
complexity of the FPGA design increases, the bridges in the
FPGA may take longer times to enable or disable.
This patch adds a new 'struct fpga_image_info', moves the
current 'u32 flags' to it. Two other image-specific u32's
are added for the bridge enable/disable timeouts. The FPGA
Manager API functions are changed, replacing the 'u32 flag'
parameter with a pointer to struct fpga_image_info.
Subsequent patches fix the existing low level FPGA manager
drivers.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
---
v19: Added in v19 of this patchset
v20: Squashed patches that change API for socfpga and zynq
v21: Add Moritz' ack
s/Mangager/Manager/
---
drivers/fpga/fpga-mgr.c | 17 +++++++++--------
drivers/fpga/socfpga.c | 7 ++++---
drivers/fpga/zynq-fpga.c | 10 ++++++----
include/linux/fpga/fpga-mgr.h | 23 +++++++++++++++++++----
4 files changed, 38 insertions(+), 19 deletions(-)
diff --git a/drivers/fpga/fpga-mgr.c b/drivers/fpga/fpga-mgr.c
index 953dc91..c58b4c4 100644
--- a/drivers/fpga/fpga-mgr.c
+++ b/drivers/fpga/fpga-mgr.c
@@ -32,7 +32,7 @@ static struct class *fpga_mgr_class;
/**
* fpga_mgr_buf_load - load fpga from image in buffer
* @mgr: fpga manager
- * @flags: flags setting fpga confuration modes
+ * @info: fpga image specific information
* @buf: buffer contain fpga image
* @count: byte count of buf
*
@@ -43,8 +43,8 @@ static struct class *fpga_mgr_class;
*
* Return: 0 on success, negative error code otherwise.
*/
-int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags, const char *buf,
- size_t count)
+int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info,
+ const char *buf, size_t count)
{
struct device *dev = &mgr->dev;
int ret;
@@ -55,7 +55,7 @@ int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags, const char *buf,
* ready to receive an FPGA image.
*/
mgr->state = FPGA_MGR_STATE_WRITE_INIT;
- ret = mgr->mops->write_init(mgr, flags, buf, count);
+ ret = mgr->mops->write_init(mgr, info, buf, count);
if (ret) {
dev_err(dev, "Error preparing FPGA for writing\n");
mgr->state = FPGA_MGR_STATE_WRITE_INIT_ERR;
@@ -78,7 +78,7 @@ int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags, const char *buf,
* steps to finish and set the FPGA into operating mode.
*/
mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE;
- ret = mgr->mops->write_complete(mgr, flags);
+ ret = mgr->mops->write_complete(mgr, info);
if (ret) {
dev_err(dev, "Error after writing image data to FPGA\n");
mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE_ERR;
@@ -93,7 +93,7 @@ EXPORT_SYMBOL_GPL(fpga_mgr_buf_load);
/**
* fpga_mgr_firmware_load - request firmware and load to fpga
* @mgr: fpga manager
- * @flags: flags setting fpga confuration modes
+ * @info: fpga image specific information
* @image_name: name of image file on the firmware search path
*
* Request an FPGA image using the firmware class, then write out to the FPGA.
@@ -103,7 +103,8 @@ EXPORT_SYMBOL_GPL(fpga_mgr_buf_load);
*
* Return: 0 on success, negative error code otherwise.
*/
-int fpga_mgr_firmware_load(struct fpga_manager *mgr, u32 flags,
+int fpga_mgr_firmware_load(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
const char *image_name)
{
struct device *dev = &mgr->dev;
@@ -121,7 +122,7 @@ int fpga_mgr_firmware_load(struct fpga_manager *mgr, u32 flags,
return ret;
}
- ret = fpga_mgr_buf_load(mgr, flags, fw->data, fw->size);
+ ret = fpga_mgr_buf_load(mgr, info, fw->data, fw->size);
release_firmware(fw);
diff --git a/drivers/fpga/socfpga.c b/drivers/fpga/socfpga.c
index 27d2ff2..b6672e6 100644
--- a/drivers/fpga/socfpga.c
+++ b/drivers/fpga/socfpga.c
@@ -407,13 +407,14 @@ static int socfpga_fpga_reset(struct fpga_manager *mgr)
/*
* Prepare the FPGA to receive the configuration data.
*/
-static int socfpga_fpga_ops_configure_init(struct fpga_manager *mgr, u32 flags,
+static int socfpga_fpga_ops_configure_init(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
const char *buf, size_t count)
{
struct socfpga_fpga_priv *priv = mgr->priv;
int ret;
- if (flags & FPGA_MGR_PARTIAL_RECONFIG) {
+ if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
return -EINVAL;
}
@@ -478,7 +479,7 @@ static int socfpga_fpga_ops_configure_write(struct fpga_manager *mgr,
}
static int socfpga_fpga_ops_configure_complete(struct fpga_manager *mgr,
- u32 flags)
+ struct fpga_image_info *info)
{
struct socfpga_fpga_priv *priv = mgr->priv;
u32 status;
diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/zynq-fpga.c
index c2fb412..249682e 100644
--- a/drivers/fpga/zynq-fpga.c
+++ b/drivers/fpga/zynq-fpga.c
@@ -175,7 +175,8 @@ static irqreturn_t zynq_fpga_isr(int irq, void *data)
return IRQ_HANDLED;
}
-static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
+static int zynq_fpga_ops_write_init(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
const char *buf, size_t count)
{
struct zynq_fpga_priv *priv;
@@ -189,7 +190,7 @@ static int zynq_fpga_ops_write_init(struct fpga_manager *mgr, u32 flags,
return err;
/* don't globally reset PL if we're doing partial reconfig */
- if (!(flags & FPGA_MGR_PARTIAL_RECONFIG)) {
+ if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
/* assert AXI interface resets */
regmap_write(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET,
FPGA_RST_ALL_MASK);
@@ -343,7 +344,8 @@ static int zynq_fpga_ops_write(struct fpga_manager *mgr,
return err;
}
-static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr, u32 flags)
+static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr,
+ struct fpga_image_info *info)
{
struct zynq_fpga_priv *priv = mgr->priv;
int err;
@@ -364,7 +366,7 @@ static int zynq_fpga_ops_write_complete(struct fpga_manager *mgr, u32 flags)
return err;
/* for the partial reconfig case we didn't touch the level shifters */
- if (!(flags & FPGA_MGR_PARTIAL_RECONFIG)) {
+ if (!(info->flags & FPGA_MGR_PARTIAL_RECONFIG)) {
/* enable level shifters from PL to PS */
regmap_write(priv->slcr, SLCR_LVL_SHFTR_EN_OFFSET,
LVL_SHFTR_ENABLE_PL_TO_PS);
diff --git a/include/linux/fpga/fpga-mgr.h b/include/linux/fpga/fpga-mgr.h
index 0940bf4..040b86d 100644
--- a/include/linux/fpga/fpga-mgr.h
+++ b/include/linux/fpga/fpga-mgr.h
@@ -69,6 +69,18 @@ enum fpga_mgr_states {
#define FPGA_MGR_PARTIAL_RECONFIG BIT(0)
/**
+ * struct fpga_image_info - information specific to a FPGA image
+ * @flags: boolean flags as defined above
+ * @enable_timeout_us: maximum time to enable traffic through bridge (uSec)
+ * @disable_timeout_us: maximum time to disable traffic through bridge (uSec)
+ */
+struct fpga_image_info {
+ u32 flags;
+ u32 enable_timeout_us;
+ u32 disable_timeout_us;
+};
+
+/**
* struct fpga_manager_ops - ops for low level fpga manager drivers
* @state: returns an enum value of the FPGA's state
* @write_init: prepare the FPGA to receive confuration data
@@ -82,10 +94,12 @@ enum fpga_mgr_states {
*/
struct fpga_manager_ops {
enum fpga_mgr_states (*state)(struct fpga_manager *mgr);
- int (*write_init)(struct fpga_manager *mgr, u32 flags,
+ int (*write_init)(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
const char *buf, size_t count);
int (*write)(struct fpga_manager *mgr, const char *buf, size_t count);
- int (*write_complete)(struct fpga_manager *mgr, u32 flags);
+ int (*write_complete)(struct fpga_manager *mgr,
+ struct fpga_image_info *info);
void (*fpga_remove)(struct fpga_manager *mgr);
};
@@ -109,10 +123,11 @@ struct fpga_manager {
#define to_fpga_manager(d) container_of(d, struct fpga_manager, dev)
-int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags,
+int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info,
const char *buf, size_t count);
-int fpga_mgr_firmware_load(struct fpga_manager *mgr, u32 flags,
+int fpga_mgr_firmware_load(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
const char *image_name);
struct fpga_manager *of_fpga_mgr_get(struct device_node *node);
--
2.10.1
^ permalink raw reply related
* [PATCH v21 5/9] fpga: add fpga bridge framework
From: Alan Tull @ 2016-10-25 14:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161025145540.3722-1-atull@opensource.altera.com>
This framework adds API functions for enabling/
disabling FPGA bridges under kernel control.
This allows the Linux kernel to disable FPGA bridges
during FPGA reprogramming and to enable FPGA bridges
when FPGA reprogramming is done. This framework is
be manufacturer-agnostic, allowing it to be used in
interfaces that use the FPGA Manager Framework to
reprogram FPGA's.
The functions are:
* of_fpga_bridge_get
* fpga_bridge_put
Get/put an exclusive reference to a FPGA bridge.
* fpga_bridge_enable
* fpga_bridge_disable
Enable/Disable traffic through a bridge.
* fpga_bridge_register
* fpga_bridge_unregister
Register/unregister a device-specific low level FPGA
Bridge driver.
Get an exclusive reference to a bridge and add it to a list:
* fpga_bridge_get_to_list
To enable/disable/put a set of bridges that are on a list:
* fpga_bridges_enable
* fpga_bridges_disable
* fpga_bridges_put
Signed-off-by: Alan Tull <atull@opensource.altera.com>
---
v2: Minor cleanup
v12: Bump version to line up with simple fpga bus
Remove sysfs
Improve get/put functions, get the low level driver too.
Clean up class implementation
Add kernel doc documentation
Rename (un)register_fpga_bridge -> fpga_bridge_(un)register
v13: Add inlined empty functions for if not CONFIG_FPGA_BRIDGE
Clean up debugging
Remove unneeded #include in .h
Remove unnecessary prints
Remove 'label' DT binding.
Document the mutex
v14: Allow bridges with no ops
*const* struct fpga_bridge_ops
Add functions to git/put/enable/disable list of bridges
Add list node to struct fpga_bridge
Do of_node_get/put in of_fpga_bridge_get()
Add r/o attributes: name and state
v15: No change in this patch for v15 of this patch set
v16: Remove of_get_fpga_bus function
v17: No change to this patch in v17 of patch set
v18: No change to this patch in v18 of patch set
v19: Use fpga image info struct
Support fpga image specific timeouts
Support child fpga-regions by doing of_platform_populate
make a tristate in Kconfig
v20: No change for this patch in v20 of patchset
v21: remove unneeded of_node_get/put
---
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile | 3 +
drivers/fpga/fpga-bridge.c | 395 +++++++++++++++++++++++++++++++++++++++
include/linux/fpga/fpga-bridge.h | 60 ++++++
4 files changed, 465 insertions(+)
create mode 100644 drivers/fpga/fpga-bridge.c
create mode 100644 include/linux/fpga/fpga-bridge.h
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index cd84934..9b20f45 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -26,6 +26,13 @@ config FPGA_MGR_ZYNQ_FPGA
help
FPGA manager driver support for Xilinx Zynq FPGAs.
+config FPGA_BRIDGE
+ tristate "FPGA Bridge Framework"
+ depends on OF
+ help
+ Say Y here if you want to support bridges connected between host
+ processors and FPGAs or between FPGAs.
+
endif # FPGA
endmenu
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 8d83fc6..4baef00 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -8,3 +8,6 @@ obj-$(CONFIG_FPGA) += fpga-mgr.o
# FPGA Manager Drivers
obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o
obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
+
+# FPGA Bridge Drivers
+obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o
diff --git a/drivers/fpga/fpga-bridge.c b/drivers/fpga/fpga-bridge.c
new file mode 100644
index 0000000..33ee83e
--- /dev/null
+++ b/drivers/fpga/fpga-bridge.c
@@ -0,0 +1,395 @@
+/*
+ * FPGA Bridge Framework Driver
+ *
+ * Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+static DEFINE_IDA(fpga_bridge_ida);
+static struct class *fpga_bridge_class;
+
+/* Lock for adding/removing bridges to linked lists*/
+spinlock_t bridge_list_lock;
+
+static int fpga_bridge_of_node_match(struct device *dev, const void *data)
+{
+ return dev->of_node == data;
+}
+
+/**
+ * fpga_bridge_enable - Enable transactions on the bridge
+ *
+ * @bridge: FPGA bridge
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_enable(struct fpga_bridge *bridge)
+{
+ dev_dbg(&bridge->dev, "enable\n");
+
+ if (bridge->br_ops && bridge->br_ops->enable_set)
+ return bridge->br_ops->enable_set(bridge, 1);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_enable);
+
+/**
+ * fpga_bridge_disable - Disable transactions on the bridge
+ *
+ * @bridge: FPGA bridge
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_disable(struct fpga_bridge *bridge)
+{
+ dev_dbg(&bridge->dev, "disable\n");
+
+ if (bridge->br_ops && bridge->br_ops->enable_set)
+ return bridge->br_ops->enable_set(bridge, 0);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_disable);
+
+/**
+ * of_fpga_bridge_get - get an exclusive reference to a fpga bridge
+ *
+ * @np: node pointer of a FPGA bridge
+ * @info: fpga image specific information
+ *
+ * Return fpga_bridge struct if successful.
+ * Return -EBUSY if someone already has a reference to the bridge.
+ * Return -ENODEV if @np is not a FPGA Bridge.
+ */
+struct fpga_bridge *of_fpga_bridge_get(struct device_node *np,
+ struct fpga_image_info *info)
+
+{
+ struct device *dev;
+ struct fpga_bridge *bridge;
+ int ret = -ENODEV;
+
+ dev = class_find_device(fpga_bridge_class, NULL, np,
+ fpga_bridge_of_node_match);
+ if (!dev)
+ goto err_dev;
+
+ bridge = to_fpga_bridge(dev);
+ if (!bridge)
+ goto err_dev;
+
+ bridge->info = info;
+
+ if (!mutex_trylock(&bridge->mutex)) {
+ ret = -EBUSY;
+ goto err_dev;
+ }
+
+ if (!try_module_get(dev->parent->driver->owner))
+ goto err_ll_mod;
+
+ dev_dbg(&bridge->dev, "get\n");
+
+ return bridge;
+
+err_ll_mod:
+ mutex_unlock(&bridge->mutex);
+err_dev:
+ put_device(dev);
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(of_fpga_bridge_get);
+
+/**
+ * fpga_bridge_put - release a reference to a bridge
+ *
+ * @bridge: FPGA bridge
+ */
+void fpga_bridge_put(struct fpga_bridge *bridge)
+{
+ dev_dbg(&bridge->dev, "put\n");
+
+ bridge->info = NULL;
+ module_put(bridge->dev.parent->driver->owner);
+ mutex_unlock(&bridge->mutex);
+ put_device(&bridge->dev);
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_put);
+
+/**
+ * fpga_bridges_enable - enable bridges in a list
+ * @bridge_list: list of FPGA bridges
+ *
+ * Enable each bridge in the list. If list is empty, do nothing.
+ *
+ * Return 0 for success or empty bridge list; return error code otherwise.
+ */
+int fpga_bridges_enable(struct list_head *bridge_list)
+{
+ struct fpga_bridge *bridge;
+ struct list_head *node;
+ int ret;
+
+ list_for_each(node, bridge_list) {
+ bridge = list_entry(node, struct fpga_bridge, node);
+ ret = fpga_bridge_enable(bridge);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridges_enable);
+
+/**
+ * fpga_bridges_disable - disable bridges in a list
+ *
+ * @bridge_list: list of FPGA bridges
+ *
+ * Disable each bridge in the list. If list is empty, do nothing.
+ *
+ * Return 0 for success or empty bridge list; return error code otherwise.
+ */
+int fpga_bridges_disable(struct list_head *bridge_list)
+{
+ struct fpga_bridge *bridge;
+ struct list_head *node;
+ int ret;
+
+ list_for_each(node, bridge_list) {
+ bridge = list_entry(node, struct fpga_bridge, node);
+ ret = fpga_bridge_disable(bridge);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridges_disable);
+
+/**
+ * fpga_bridges_put - put bridges
+ *
+ * @bridge_list: list of FPGA bridges
+ *
+ * For each bridge in the list, put the bridge and remove it from the list.
+ * If list is empty, do nothing.
+ */
+void fpga_bridges_put(struct list_head *bridge_list)
+{
+ struct fpga_bridge *bridge;
+ struct list_head *node, *next;
+ unsigned long flags;
+
+ list_for_each_safe(node, next, bridge_list) {
+ bridge = list_entry(node, struct fpga_bridge, node);
+
+ fpga_bridge_put(bridge);
+
+ spin_lock_irqsave(&bridge_list_lock, flags);
+ list_del(&bridge->node);
+ spin_unlock_irqrestore(&bridge_list_lock, flags);
+ }
+}
+EXPORT_SYMBOL_GPL(fpga_bridges_put);
+
+/**
+ * fpga_bridges_get_to_list - get a bridge, add it to a list
+ *
+ * @np: node pointer of a FPGA bridge
+ * @info: fpga image specific information
+ * @bridge_list: list of FPGA bridges
+ *
+ * Get an exclusive reference to the bridge and and it to the list.
+ *
+ * Return 0 for success, error code from of_fpga_bridge_get() othewise.
+ */
+int fpga_bridge_get_to_list(struct device_node *np,
+ struct fpga_image_info *info,
+ struct list_head *bridge_list)
+{
+ struct fpga_bridge *bridge;
+ unsigned long flags;
+
+ bridge = of_fpga_bridge_get(np, info);
+ if (IS_ERR(bridge))
+ return PTR_ERR(bridge);
+
+ spin_lock_irqsave(&bridge_list_lock, flags);
+ list_add(&bridge->node, bridge_list);
+ spin_unlock_irqrestore(&bridge_list_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_get_to_list);
+
+static ssize_t name_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fpga_bridge *bridge = to_fpga_bridge(dev);
+
+ return sprintf(buf, "%s\n", bridge->name);
+}
+
+static ssize_t state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fpga_bridge *bridge = to_fpga_bridge(dev);
+ int enable = 1;
+
+ if (bridge->br_ops && bridge->br_ops->enable_show)
+ enable = bridge->br_ops->enable_show(bridge);
+
+ return sprintf(buf, "%s\n", enable ? "enabled" : "disabled");
+}
+
+static DEVICE_ATTR_RO(name);
+static DEVICE_ATTR_RO(state);
+
+static struct attribute *fpga_bridge_attrs[] = {
+ &dev_attr_name.attr,
+ &dev_attr_state.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(fpga_bridge);
+
+/**
+ * fpga_bridge_register - register a fpga bridge driver
+ * @dev: FPGA bridge device from pdev
+ * @name: FPGA bridge name
+ * @br_ops: pointer to structure of fpga bridge ops
+ * @priv: FPGA bridge private data
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_register(struct device *dev, const char *name,
+ const struct fpga_bridge_ops *br_ops, void *priv)
+{
+ struct fpga_bridge *bridge;
+ int id, ret = 0;
+
+ if (!name || !strlen(name)) {
+ dev_err(dev, "Attempt to register with no name!\n");
+ return -EINVAL;
+ }
+
+ bridge = kzalloc(sizeof(*bridge), GFP_KERNEL);
+ if (!bridge)
+ return -ENOMEM;
+
+ id = ida_simple_get(&fpga_bridge_ida, 0, 0, GFP_KERNEL);
+ if (id < 0) {
+ ret = id;
+ goto error_kfree;
+ }
+
+ mutex_init(&bridge->mutex);
+ INIT_LIST_HEAD(&bridge->node);
+
+ bridge->name = name;
+ bridge->br_ops = br_ops;
+ bridge->priv = priv;
+
+ device_initialize(&bridge->dev);
+ bridge->dev.class = fpga_bridge_class;
+ bridge->dev.parent = dev;
+ bridge->dev.of_node = dev->of_node;
+ bridge->dev.id = id;
+ dev_set_drvdata(dev, bridge);
+
+ ret = dev_set_name(&bridge->dev, "br%d", id);
+ if (ret)
+ goto error_device;
+
+ ret = device_add(&bridge->dev);
+ if (ret)
+ goto error_device;
+
+ of_platform_populate(dev->of_node, NULL, NULL, dev);
+
+ dev_info(bridge->dev.parent, "fpga bridge [%s] registered\n",
+ bridge->name);
+
+ return 0;
+
+error_device:
+ ida_simple_remove(&fpga_bridge_ida, id);
+error_kfree:
+ kfree(bridge);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_register);
+
+/**
+ * fpga_bridge_unregister - unregister a fpga bridge driver
+ * @dev: FPGA bridge device from pdev
+ */
+void fpga_bridge_unregister(struct device *dev)
+{
+ struct fpga_bridge *bridge = dev_get_drvdata(dev);
+
+ /*
+ * If the low level driver provides a method for putting bridge into
+ * a desired state upon unregister, do it.
+ */
+ if (bridge->br_ops && bridge->br_ops->fpga_bridge_remove)
+ bridge->br_ops->fpga_bridge_remove(bridge);
+
+ device_unregister(&bridge->dev);
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_unregister);
+
+static void fpga_bridge_dev_release(struct device *dev)
+{
+ struct fpga_bridge *bridge = to_fpga_bridge(dev);
+
+ ida_simple_remove(&fpga_bridge_ida, bridge->dev.id);
+ kfree(bridge);
+}
+
+static int __init fpga_bridge_dev_init(void)
+{
+ spin_lock_init(&bridge_list_lock);
+
+ fpga_bridge_class = class_create(THIS_MODULE, "fpga_bridge");
+ if (IS_ERR(fpga_bridge_class))
+ return PTR_ERR(fpga_bridge_class);
+
+ fpga_bridge_class->dev_groups = fpga_bridge_groups;
+ fpga_bridge_class->dev_release = fpga_bridge_dev_release;
+
+ return 0;
+}
+
+static void __exit fpga_bridge_dev_exit(void)
+{
+ class_destroy(fpga_bridge_class);
+ ida_destroy(&fpga_bridge_ida);
+}
+
+MODULE_DESCRIPTION("FPGA Bridge Driver");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
+
+subsys_initcall(fpga_bridge_dev_init);
+module_exit(fpga_bridge_dev_exit);
diff --git a/include/linux/fpga/fpga-bridge.h b/include/linux/fpga/fpga-bridge.h
new file mode 100644
index 0000000..dba6e3c
--- /dev/null
+++ b/include/linux/fpga/fpga-bridge.h
@@ -0,0 +1,60 @@
+#include <linux/device.h>
+#include <linux/fpga/fpga-mgr.h>
+
+#ifndef _LINUX_FPGA_BRIDGE_H
+#define _LINUX_FPGA_BRIDGE_H
+
+struct fpga_bridge;
+
+/**
+ * struct fpga_bridge_ops - ops for low level FPGA bridge drivers
+ * @enable_show: returns the FPGA bridge's status
+ * @enable_set: set a FPGA bridge as enabled or disabled
+ * @fpga_bridge_remove: set FPGA into a specific state during driver remove
+ */
+struct fpga_bridge_ops {
+ int (*enable_show)(struct fpga_bridge *bridge);
+ int (*enable_set)(struct fpga_bridge *bridge, bool enable);
+ void (*fpga_bridge_remove)(struct fpga_bridge *bridge);
+};
+
+/**
+ * struct fpga_bridge - FPGA bridge structure
+ * @name: name of low level FPGA bridge
+ * @dev: FPGA bridge device
+ * @mutex: enforces exclusive reference to bridge
+ * @br_ops: pointer to struct of FPGA bridge ops
+ * @info: fpga image specific information
+ * @node: FPGA bridge list node
+ * @priv: low level driver private date
+ */
+struct fpga_bridge {
+ const char *name;
+ struct device dev;
+ struct mutex mutex; /* for exclusive reference to bridge */
+ const struct fpga_bridge_ops *br_ops;
+ struct fpga_image_info *info;
+ struct list_head node;
+ void *priv;
+};
+
+#define to_fpga_bridge(d) container_of(d, struct fpga_bridge, dev)
+
+struct fpga_bridge *of_fpga_bridge_get(struct device_node *node,
+ struct fpga_image_info *info);
+void fpga_bridge_put(struct fpga_bridge *bridge);
+int fpga_bridge_enable(struct fpga_bridge *bridge);
+int fpga_bridge_disable(struct fpga_bridge *bridge);
+
+int fpga_bridges_enable(struct list_head *bridge_list);
+int fpga_bridges_disable(struct list_head *bridge_list);
+void fpga_bridges_put(struct list_head *bridge_list);
+int fpga_bridge_get_to_list(struct device_node *np,
+ struct fpga_image_info *info,
+ struct list_head *bridge_list);
+
+int fpga_bridge_register(struct device *dev, const char *name,
+ const struct fpga_bridge_ops *br_ops, void *priv);
+void fpga_bridge_unregister(struct device *dev);
+
+#endif /* _LINUX_FPGA_BRIDGE_H */
--
2.10.1
^ permalink raw reply related
* [PATCH v21 6/9] fpga: fpga-region: device tree control for FPGA
From: Alan Tull @ 2016-10-25 14:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161025145540.3722-1-atull@opensource.altera.com>
FPGA Regions support programming FPGA under control of the Device
Tree.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
---
v9: initial version (this patch added during rest of patchset's v9)
v10: request deferral if fpga mgr or bridges not available yet
cleanup as fpga manager core goes into the real kernel
Don't assume bridges are disabled before programming FPGA
Don't hang onto reference for fpga manager
Move to staging/simple-fpga-bus
v11: No change in this patch for v11 of the patch set
v12: Moved out of staging.
Use fpga bridges framework.
v13: If no bridges are specified, assume we don't need any.
Clean up debug messages
Some dev_info -> dev_dbg
Remove unneeded #include
Fix size of array of pointers
Don't need to specify .owner
Use common binding: firmware-name
v14: OK it's not a simple bus. Call it "FPGA Area"
Remove bindings that specify FPGA manager and FPGA bridges
Use parent FPGA bridge and bridges that are its peers
Use ancestor FPGA Manager
v15: Add altr,fpga-bus implementation
Change compatible string "fpga-area" -> "altr,fpga-area"
v16: Much changes as FPGA Areas and Busses become FPGA Regions
Add reconfig notifier, don't rely on simple-bus
v17: Use new overlay notifier instead of reconfig notifier
Add external_fpga_config property used in u-boot
Change partial-reconfig binding to partial-fpga-config to be
similar to *-fpga-config bindings used in u-boot
v18: No change to this patch in v18 of patch set
v19: add fpga image information struct
support region as child of fpga bridge
remove message about not finding region
Make a tristate in the Kconfig
Add dependency on bridges in Kconfig
v20: No change for this patch in v20 of patchset
v21: No change for this patch in v21 of patchset
---
drivers/fpga/Kconfig | 7 +
drivers/fpga/Makefile | 3 +
drivers/fpga/fpga-region.c | 603 ++++++++++++++++++++++++++++++++++++++++++
include/linux/fpga/fpga-mgr.h | 2 +
4 files changed, 615 insertions(+)
create mode 100644 drivers/fpga/fpga-region.c
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 9b20f45..e0e1257 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -13,6 +13,13 @@ config FPGA
if FPGA
+config FPGA_REGION
+ tristate "FPGA Region"
+ depends on OF && FPGA_BRIDGE
+ help
+ FPGA Regions allow loading FPGA images under control of
+ the Device Tree.
+
config FPGA_MGR_SOCFPGA
tristate "Altera SOCFPGA FPGA Manager"
depends on ARCH_SOCFPGA
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 4baef00..8d746c3 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -11,3 +11,6 @@ obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
# FPGA Bridge Drivers
obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o
+
+# High Level Interfaces
+obj-$(CONFIG_FPGA_REGION) += fpga-region.o
diff --git a/drivers/fpga/fpga-region.c b/drivers/fpga/fpga-region.c
new file mode 100644
index 0000000..3222fdb
--- /dev/null
+++ b/drivers/fpga/fpga-region.c
@@ -0,0 +1,603 @@
+/*
+ * FPGA Region - Device Tree support for FPGA programming under Linux
+ *
+ * Copyright (C) 2013-2016 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+/**
+ * struct fpga_region - FPGA Region structure
+ * @dev: FPGA Region device
+ * @mutex: enforces exclusive reference to region
+ * @bridge_list: list of FPGA bridges specified in region
+ * @info: fpga image specific information
+ */
+struct fpga_region {
+ struct device dev;
+ struct mutex mutex; /* for exclusive reference to region */
+ struct list_head bridge_list;
+ struct fpga_image_info *info;
+};
+
+#define to_fpga_region(d) container_of(d, struct fpga_region, dev)
+
+static DEFINE_IDA(fpga_region_ida);
+static struct class *fpga_region_class;
+
+static const struct of_device_id fpga_region_of_match[] = {
+ { .compatible = "fpga-region", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, fpga_region_of_match);
+
+static int fpga_region_of_node_match(struct device *dev, const void *data)
+{
+ return dev->of_node == data;
+}
+
+/**
+ * fpga_region_find - find FPGA region
+ * @np: device node of FPGA Region
+ * Caller will need to put_device(®ion->dev) when done.
+ * Returns FPGA Region struct or NULL
+ */
+static struct fpga_region *fpga_region_find(struct device_node *np)
+{
+ struct device *dev;
+
+ dev = class_find_device(fpga_region_class, NULL, np,
+ fpga_region_of_node_match);
+ if (!dev)
+ return NULL;
+
+ return to_fpga_region(dev);
+}
+
+/**
+ * fpga_region_get - get an exclusive reference to a fpga region
+ * @region: FPGA Region struct
+ *
+ * Caller should call fpga_region_put() when done with region.
+ *
+ * Return fpga_region struct if successful.
+ * Return -EBUSY if someone already has a reference to the region.
+ * Return -ENODEV if @np is not a FPGA Region.
+ */
+static struct fpga_region *fpga_region_get(struct fpga_region *region)
+{
+ struct device *dev = ®ion->dev;
+
+ if (!mutex_trylock(®ion->mutex)) {
+ dev_dbg(dev, "%s: FPGA Region already in use\n", __func__);
+ return ERR_PTR(-EBUSY);
+ }
+
+ get_device(dev);
+ of_node_get(dev->of_node);
+ if (!try_module_get(dev->parent->driver->owner)) {
+ of_node_put(dev->of_node);
+ put_device(dev);
+ mutex_unlock(®ion->mutex);
+ return ERR_PTR(-ENODEV);
+ }
+
+ dev_dbg(®ion->dev, "get\n");
+
+ return region;
+}
+
+/**
+ * fpga_region_put - release a reference to a region
+ *
+ * @region: FPGA region
+ */
+static void fpga_region_put(struct fpga_region *region)
+{
+ struct device *dev = ®ion->dev;
+
+ dev_dbg(®ion->dev, "put\n");
+
+ module_put(dev->parent->driver->owner);
+ of_node_put(dev->of_node);
+ put_device(dev);
+ mutex_unlock(®ion->mutex);
+}
+
+/**
+ * fpga_region_get_manager - get exclusive reference for FPGA manager
+ * @region: FPGA region
+ *
+ * Get FPGA Manager from "fpga-mgr" property or from ancestor region.
+ *
+ * Caller should call fpga_mgr_put() when done with manager.
+ *
+ * Return: fpga manager struct or IS_ERR() condition containing error code.
+ */
+static struct fpga_manager *fpga_region_get_manager(struct fpga_region *region)
+{
+ struct device *dev = ®ion->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *mgr_node;
+ struct fpga_manager *mgr;
+
+ of_node_get(np);
+ while (np) {
+ if (of_device_is_compatible(np, "fpga-region")) {
+ mgr_node = of_parse_phandle(np, "fpga-mgr", 0);
+ if (mgr_node) {
+ mgr = of_fpga_mgr_get(mgr_node);
+ of_node_put(np);
+ return mgr;
+ }
+ }
+ np = of_get_next_parent(np);
+ }
+ of_node_put(np);
+
+ return ERR_PTR(-EINVAL);
+}
+
+/**
+ * fpga_region_get_bridges - create a list of bridges
+ * @region: FPGA region
+ * @overlay: device node of the overlay
+ *
+ * Create a list of bridges including the parent bridge and the bridges
+ * specified by "fpga-bridges" property. Note that the
+ * fpga_bridges_enable/disable/put functions are all fine with an empty list
+ * if that happens.
+ *
+ * Caller should call fpga_bridges_put(®ion->bridge_list) when
+ * done with the bridges.
+ *
+ * Return 0 for success (even if there are no bridges specified)
+ * or -EBUSY if any of the bridges are in use.
+ */
+static int fpga_region_get_bridges(struct fpga_region *region,
+ struct device_node *overlay)
+{
+ struct device *dev = ®ion->dev;
+ struct device_node *region_np = dev->of_node;
+ struct device_node *br, *np, *parent_br = NULL;
+ int i, ret;
+
+ /* If parent is a bridge, add to list */
+ ret = fpga_bridge_get_to_list(region_np->parent, region->info,
+ ®ion->bridge_list);
+ if (ret == -EBUSY)
+ return ret;
+
+ if (!ret)
+ parent_br = region_np->parent;
+
+ /* If overlay has a list of bridges, use it. */
+ if (of_parse_phandle(overlay, "fpga-bridges", 0))
+ np = overlay;
+ else
+ np = region_np;
+
+ for (i = 0; ; i++) {
+ br = of_parse_phandle(np, "fpga-bridges", i);
+ if (!br)
+ break;
+
+ /* If parent bridge is in list, skip it. */
+ if (br == parent_br)
+ continue;
+
+ /* If node is a bridge, get it and add to list */
+ ret = fpga_bridge_get_to_list(br, region->info,
+ ®ion->bridge_list);
+
+ /* If any of the bridges are in use, give up */
+ if (ret == -EBUSY) {
+ fpga_bridges_put(®ion->bridge_list);
+ return -EBUSY;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * fpga_region_program_fpga - program FPGA
+ * @region: FPGA region
+ * @firmware_name: name of FPGA image firmware file
+ * @overlay: device node of the overlay
+ * Program an FPGA using information in the device tree.
+ * Function assumes that there is a firmware-name property.
+ * Return 0 for success or negative error code.
+ */
+static int fpga_region_program_fpga(struct fpga_region *region,
+ const char *firmware_name,
+ struct device_node *overlay)
+{
+ struct fpga_manager *mgr;
+ int ret;
+
+ region = fpga_region_get(region);
+ if (IS_ERR(region)) {
+ pr_err("failed to get fpga region\n");
+ return PTR_ERR(region);
+ }
+
+ mgr = fpga_region_get_manager(region);
+ if (IS_ERR(mgr)) {
+ pr_err("failed to get fpga region manager\n");
+ return PTR_ERR(mgr);
+ }
+
+ ret = fpga_region_get_bridges(region, overlay);
+ if (ret) {
+ pr_err("failed to get fpga region bridges\n");
+ goto err_put_mgr;
+ }
+
+ ret = fpga_bridges_disable(®ion->bridge_list);
+ if (ret) {
+ pr_err("failed to disable region bridges\n");
+ goto err_put_br;
+ }
+
+ ret = fpga_mgr_firmware_load(mgr, region->info, firmware_name);
+ if (ret) {
+ pr_err("failed to load fpga image\n");
+ goto err_put_br;
+ }
+
+ ret = fpga_bridges_enable(®ion->bridge_list);
+ if (ret) {
+ pr_err("failed to enable region bridges\n");
+ goto err_put_br;
+ }
+
+ fpga_mgr_put(mgr);
+ fpga_region_put(region);
+
+ return 0;
+
+err_put_br:
+ fpga_bridges_put(®ion->bridge_list);
+err_put_mgr:
+ fpga_mgr_put(mgr);
+ fpga_region_put(region);
+
+ return ret;
+}
+
+/**
+ * child_regions_with_firmware
+ * @overlay: device node of the overlay
+ *
+ * If the overlay adds child FPGA regions, they are not allowed to have
+ * firmware-name property.
+ *
+ * Return 0 for OK or -EINVAL if child FPGA region adds firmware-name.
+ */
+static int child_regions_with_firmware(struct device_node *overlay)
+{
+ struct device_node *child_region;
+ const char *child_firmware_name;
+ int ret = 0;
+
+ of_node_get(overlay);
+
+ child_region = of_find_matching_node(overlay, fpga_region_of_match);
+ while (child_region) {
+ if (!of_property_read_string(child_region, "firmware-name",
+ &child_firmware_name)) {
+ ret = -EINVAL;
+ break;
+ }
+ child_region = of_find_matching_node(child_region,
+ fpga_region_of_match);
+ }
+
+ of_node_put(child_region);
+
+ if (ret)
+ pr_err("firmware-name not allowed in child FPGA region: %s",
+ child_region->full_name);
+
+ return ret;
+}
+
+/**
+ * fpga_region_notify_pre_apply - pre-apply overlay notification
+ *
+ * @region: FPGA region that the overlay was applied to
+ * @nd: overlay notification data
+ *
+ * Called after when an overlay targeted to a FPGA Region is about to be
+ * applied. Function will check the properties that will be added to the FPGA
+ * region. If the checks pass, it will program the FPGA.
+ *
+ * The checks are:
+ * The overlay must add either firmware-name or external-fpga-config property
+ * to the FPGA Region.
+ *
+ * firmware-name : program the FPGA
+ * external-fpga-config : FPGA is already programmed
+ *
+ * The overlay can add other FPGA regions, but child FPGA regions cannot have a
+ * firmware-name property since those regions don't exist yet.
+ *
+ * If the overlay that breaks the rules, notifier returns an error and the
+ * overlay is rejected before it goes into the main tree.
+ *
+ * Returns 0 for success or negative error code for failure.
+ */
+static int fpga_region_notify_pre_apply(struct fpga_region *region,
+ struct of_overlay_notify_data *nd)
+{
+ const char *firmware_name = NULL;
+ struct fpga_image_info *info;
+ int ret;
+
+ info = devm_kzalloc(®ion->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ region->info = info;
+
+ /* Reject overlay if child FPGA Regions have firmware-name property */
+ ret = child_regions_with_firmware(nd->overlay);
+ if (ret)
+ return ret;
+
+ /* Read FPGA region properties from the overlay */
+ if (of_property_read_bool(nd->overlay, "partial-fpga-config"))
+ info->flags |= FPGA_MGR_PARTIAL_RECONFIG;
+
+ if (of_property_read_bool(nd->overlay, "external-fpga-config"))
+ info->flags |= FPGA_MGR_EXTERNAL_CONFIG;
+
+ of_property_read_string(nd->overlay, "firmware-name", &firmware_name);
+
+ of_property_read_u32(nd->overlay, "region-unfreeze-timeout-us",
+ &info->enable_timeout_us);
+
+ of_property_read_u32(nd->overlay, "region-freeze-timeout-us",
+ &info->disable_timeout_us);
+
+ /* If FPGA was externally programmed, don't specify firmware */
+ if ((info->flags & FPGA_MGR_EXTERNAL_CONFIG) && firmware_name) {
+ pr_err("error: specified firmware and external-fpga-config");
+ return -EINVAL;
+ }
+
+ /* FPGA is already configured externally. We're done. */
+ if (info->flags & FPGA_MGR_EXTERNAL_CONFIG)
+ return 0;
+
+ /* If we got this far, we should be programming the FPGA */
+ if (!firmware_name) {
+ pr_err("should specify firmware-name or external-fpga-config\n");
+ return -EINVAL;
+ }
+
+ return fpga_region_program_fpga(region, firmware_name, nd->overlay);
+}
+
+/**
+ * fpga_region_notify_post_remove - post-remove overlay notification
+ *
+ * @region: FPGA region that was targeted by the overlay that was removed
+ * @nd: overlay notification data
+ *
+ * Called after an overlay has been removed if the overlay's target was a
+ * FPGA region.
+ */
+static void fpga_region_notify_post_remove(struct fpga_region *region,
+ struct of_overlay_notify_data *nd)
+{
+ fpga_bridges_disable(®ion->bridge_list);
+ fpga_bridges_put(®ion->bridge_list);
+ devm_kfree(®ion->dev, region->info);
+ region->info = NULL;
+}
+
+/**
+ * of_fpga_region_notify - reconfig notifier for dynamic DT changes
+ * @nb: notifier block
+ * @action: notifier action
+ * @arg: reconfig data
+ *
+ * This notifier handles programming a FPGA when a "firmware-name" property is
+ * added to a fpga-region.
+ *
+ * Returns NOTIFY_OK or error if FPGA programming fails.
+ */
+static int of_fpga_region_notify(struct notifier_block *nb,
+ unsigned long action, void *arg)
+{
+ struct of_overlay_notify_data *nd = arg;
+ struct fpga_region *region;
+ int ret;
+
+ switch (action) {
+ case OF_OVERLAY_PRE_APPLY:
+ pr_debug("%s OF_OVERLAY_PRE_APPLY\n", __func__);
+ break;
+ case OF_OVERLAY_POST_APPLY:
+ pr_debug("%s OF_OVERLAY_POST_APPLY\n", __func__);
+ return NOTIFY_OK; /* not for us */
+ case OF_OVERLAY_PRE_REMOVE:
+ pr_debug("%s OF_OVERLAY_PRE_REMOVE\n", __func__);
+ return NOTIFY_OK; /* not for us */
+ case OF_OVERLAY_POST_REMOVE:
+ pr_debug("%s OF_OVERLAY_POST_REMOVE\n", __func__);
+ break;
+ default: /* should not happen */
+ return NOTIFY_OK;
+ }
+
+ region = fpga_region_find(nd->target);
+ if (!region)
+ return NOTIFY_OK;
+
+ ret = 0;
+ switch (action) {
+ case OF_OVERLAY_PRE_APPLY:
+ ret = fpga_region_notify_pre_apply(region, nd);
+ break;
+
+ case OF_OVERLAY_POST_REMOVE:
+ fpga_region_notify_post_remove(region, nd);
+ break;
+ }
+
+ put_device(®ion->dev);
+
+ if (ret)
+ return notifier_from_errno(ret);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block fpga_region_of_nb = {
+ .notifier_call = of_fpga_region_notify,
+};
+
+static int fpga_region_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct fpga_region *region;
+ int id, ret = 0;
+
+ region = kzalloc(sizeof(*region), GFP_KERNEL);
+ if (!region)
+ return -ENOMEM;
+
+ id = ida_simple_get(&fpga_region_ida, 0, 0, GFP_KERNEL);
+ if (id < 0) {
+ ret = id;
+ goto err_kfree;
+ }
+
+ mutex_init(®ion->mutex);
+ INIT_LIST_HEAD(®ion->bridge_list);
+
+ device_initialize(®ion->dev);
+ region->dev.class = fpga_region_class;
+ region->dev.parent = dev;
+ region->dev.of_node = np;
+ region->dev.id = id;
+ dev_set_drvdata(dev, region);
+
+ ret = dev_set_name(®ion->dev, "region%d", id);
+ if (ret)
+ goto err_remove;
+
+ ret = device_add(®ion->dev);
+ if (ret)
+ goto err_remove;
+
+ of_platform_populate(np, fpga_region_of_match, NULL, ®ion->dev);
+
+ dev_info(dev, "FPGA Region probed\n");
+
+ return 0;
+
+err_remove:
+ ida_simple_remove(&fpga_region_ida, id);
+err_kfree:
+ kfree(region);
+
+ return ret;
+}
+
+static int fpga_region_remove(struct platform_device *pdev)
+{
+ struct fpga_region *region = platform_get_drvdata(pdev);
+
+ device_unregister(®ion->dev);
+
+ return 0;
+}
+
+static struct platform_driver fpga_region_driver = {
+ .probe = fpga_region_probe,
+ .remove = fpga_region_remove,
+ .driver = {
+ .name = "fpga-region",
+ .of_match_table = of_match_ptr(fpga_region_of_match),
+ },
+};
+
+static void fpga_region_dev_release(struct device *dev)
+{
+ struct fpga_region *region = to_fpga_region(dev);
+
+ ida_simple_remove(&fpga_region_ida, region->dev.id);
+ kfree(region);
+}
+
+/**
+ * fpga_region_init - init function for fpga_region class
+ * Creates the fpga_region class and registers a reconfig notifier.
+ */
+static int __init fpga_region_init(void)
+{
+ int ret;
+
+ fpga_region_class = class_create(THIS_MODULE, "fpga_region");
+ if (IS_ERR(fpga_region_class))
+ return PTR_ERR(fpga_region_class);
+
+ fpga_region_class->dev_release = fpga_region_dev_release;
+
+ ret = of_overlay_notifier_register(&fpga_region_of_nb);
+ if (ret)
+ goto err_class;
+
+ ret = platform_driver_register(&fpga_region_driver);
+ if (ret)
+ goto err_plat;
+
+ return 0;
+
+err_plat:
+ of_overlay_notifier_unregister(&fpga_region_of_nb);
+err_class:
+ class_destroy(fpga_region_class);
+ ida_destroy(&fpga_region_ida);
+ return ret;
+}
+
+static void __exit fpga_region_exit(void)
+{
+ platform_driver_unregister(&fpga_region_driver);
+ of_overlay_notifier_unregister(&fpga_region_of_nb);
+ class_destroy(fpga_region_class);
+ ida_destroy(&fpga_region_ida);
+}
+
+subsys_initcall(fpga_region_init);
+module_exit(fpga_region_exit);
+
+MODULE_DESCRIPTION("FPGA Region");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/fpga/fpga-mgr.h b/include/linux/fpga/fpga-mgr.h
index 040b86d..12f6207 100644
--- a/include/linux/fpga/fpga-mgr.h
+++ b/include/linux/fpga/fpga-mgr.h
@@ -65,8 +65,10 @@ enum fpga_mgr_states {
/*
* FPGA Manager flags
* FPGA_MGR_PARTIAL_RECONFIG: do partial reconfiguration if supported
+ * FPGA_MGR_EXTERNAL_CONFIG: FPGA has been configured prior to Linux booting
*/
#define FPGA_MGR_PARTIAL_RECONFIG BIT(0)
+#define FPGA_MGR_EXTERNAL_CONFIG BIT(1)
/**
* struct fpga_image_info - information specific to a FPGA image
--
2.10.1
^ permalink raw reply related
* [PATCH v21 7/9] ARM: socfpga: fpga bridge driver support
From: Alan Tull @ 2016-10-25 14:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161025145540.3722-1-atull@opensource.altera.com>
Supports Altera SOCFPGA bridges:
* fpga2sdram
* fpga2hps
* hps2fpga
* lwhps2fpga
Allows enabling/disabling the bridges through the FPGA
Bridge Framework API functions.
The fpga2sdram driver only supports enabling and disabling
of the ports that been configured early on. This is due to
a hardware limitation where the read, write, and command
ports on the fpga2sdram bridge can only be reconfigured
while there are no transactions to the sdram, i.e. when
running out of OCRAM before the kernel boots.
Device tree property 'init-val' configures the driver to
enable or disable the bridge during probe. If the property
does not exist, the driver will leave the bridge in its
current state.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Matthew Gerlach <mgerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
v2: Use resets instead of directly writing reset registers
v12: Bump version to align with simple-fpga-bus version
Get rid of the sysfs interface
fpga2sdram: get configuration stored in handoff register
v13: Remove unneeded WARN_ON
Change property from init-val to bridge-enable
Checkpatch cleanup
Fix email address
v14: use module_platform_driver
remove unused struct field and some #defines
don't really need exclamation points on error msgs
*const* struct fpga_bridge_ops
v15: No change in this patch for v15 of this patch set
v16: No change in this patch for v16 of this patch set
v17: No change to this patch for v17 of this patch set
v18: Eliminate need to specify reset names since only one reset
v19: Set bridge state before registering driver with framework
Include fix for drivers sharing the l3_remap_value reg
use devm_clk_get
make tristate in Kconfig
documentation of handoff registers
v20: No change for this patch in v20 of patchset
v21: remove clk_put
don't look up l3regs for f2h
---
drivers/fpga/Kconfig | 7 ++
drivers/fpga/Makefile | 1 +
drivers/fpga/altera-fpga2sdram.c | 180 +++++++++++++++++++++++++++++++
drivers/fpga/altera-hps2fpga.c | 222 +++++++++++++++++++++++++++++++++++++++
4 files changed, 410 insertions(+)
create mode 100644 drivers/fpga/altera-fpga2sdram.c
create mode 100644 drivers/fpga/altera-hps2fpga.c
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index e0e1257..5605ad6 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -40,6 +40,13 @@ config FPGA_BRIDGE
Say Y here if you want to support bridges connected between host
processors and FPGAs or between FPGAs.
+config SOCFPGA_FPGA_BRIDGE
+ tristate "Altera SoCFPGA FPGA Bridges"
+ depends on ARCH_SOCFPGA && FPGA_BRIDGE
+ help
+ Say Y to enable drivers for FPGA bridges for Altera SOCFPGA
+ devices.
+
endif # FPGA
endmenu
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 8d746c3..e658436 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
# FPGA Bridge Drivers
obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o
+obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o
# High Level Interfaces
obj-$(CONFIG_FPGA_REGION) += fpga-region.o
diff --git a/drivers/fpga/altera-fpga2sdram.c b/drivers/fpga/altera-fpga2sdram.c
new file mode 100644
index 0000000..7ab358e
--- /dev/null
+++ b/drivers/fpga/altera-fpga2sdram.c
@@ -0,0 +1,180 @@
+/*
+ * FPGA to SDRAM Bridge Driver for Altera SoCFPGA Devices
+ *
+ * Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This driver manages a bridge between an FPGA and the SDRAM used by the ARM
+ * host processor system (HPS).
+ *
+ * The bridge contains 4 read ports, 4 write ports, and 6 command ports.
+ * Reconfiguring these ports requires that no SDRAM transactions occur during
+ * reconfiguration. The code reconfiguring the ports cannot run out of SDRAM
+ * nor can the FPGA access the SDRAM during reconfiguration. This driver does
+ * not support reconfiguring the ports. The ports are configured by code
+ * running out of on chip ram before Linux is started and the configuration
+ * is passed in a handoff register in the system manager.
+ *
+ * This driver supports enabling and disabling of the configured ports, which
+ * allows for safe reprogramming of the FPGA, assuming that the new FPGA image
+ * uses the same port configuration. Bridges must be disabled before
+ * reprogramming the FPGA and re-enabled after the FPGA has been programmed.
+ */
+
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+
+#define ALT_SDR_CTL_FPGAPORTRST_OFST 0x80
+#define ALT_SDR_CTL_FPGAPORTRST_PORTRSTN_MSK 0x00003fff
+#define ALT_SDR_CTL_FPGAPORTRST_RD_SHIFT 0
+#define ALT_SDR_CTL_FPGAPORTRST_WR_SHIFT 4
+#define ALT_SDR_CTL_FPGAPORTRST_CTRL_SHIFT 8
+
+/*
+ * From the Cyclone V HPS Memory Map document:
+ * These registers are used to store handoff information between the
+ * preloader and the OS. These 8 registers can be used to store any
+ * information. The contents of these registers have no impact on
+ * the state of the HPS hardware.
+ */
+#define SYSMGR_ISWGRP_HANDOFF3 (0x8C)
+
+#define F2S_BRIDGE_NAME "fpga2sdram"
+
+struct alt_fpga2sdram_data {
+ struct device *dev;
+ struct regmap *sdrctl;
+ int mask;
+};
+
+static int alt_fpga2sdram_enable_show(struct fpga_bridge *bridge)
+{
+ struct alt_fpga2sdram_data *priv = bridge->priv;
+ int value;
+
+ regmap_read(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST, &value);
+
+ return (value & priv->mask) == priv->mask;
+}
+
+static inline int _alt_fpga2sdram_enable_set(struct alt_fpga2sdram_data *priv,
+ bool enable)
+{
+ return regmap_update_bits(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST,
+ priv->mask, enable ? priv->mask : 0);
+}
+
+static int alt_fpga2sdram_enable_set(struct fpga_bridge *bridge, bool enable)
+{
+ return _alt_fpga2sdram_enable_set(bridge->priv, enable);
+}
+
+struct prop_map {
+ char *prop_name;
+ u32 *prop_value;
+ u32 prop_max;
+};
+
+static const struct fpga_bridge_ops altera_fpga2sdram_br_ops = {
+ .enable_set = alt_fpga2sdram_enable_set,
+ .enable_show = alt_fpga2sdram_enable_show,
+};
+
+static const struct of_device_id altera_fpga_of_match[] = {
+ { .compatible = "altr,socfpga-fpga2sdram-bridge" },
+ {},
+};
+
+static int alt_fpga_bridge_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct alt_fpga2sdram_data *priv;
+ u32 enable;
+ struct regmap *sysmgr;
+ int ret = 0;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+
+ priv->sdrctl = syscon_regmap_lookup_by_compatible("altr,sdr-ctl");
+ if (IS_ERR(priv->sdrctl)) {
+ dev_err(dev, "regmap for altr,sdr-ctl lookup failed.\n");
+ return PTR_ERR(priv->sdrctl);
+ }
+
+ sysmgr = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
+ if (IS_ERR(priv->sdrctl)) {
+ dev_err(dev, "regmap for altr,sys-mgr lookup failed.\n");
+ return PTR_ERR(sysmgr);
+ }
+
+ /* Get f2s bridge configuration saved in handoff register */
+ regmap_read(sysmgr, SYSMGR_ISWGRP_HANDOFF3, &priv->mask);
+
+ ret = fpga_bridge_register(dev, F2S_BRIDGE_NAME,
+ &altera_fpga2sdram_br_ops, priv);
+ if (ret)
+ return ret;
+
+ dev_info(dev, "driver initialized with handoff %08x\n", priv->mask);
+
+ if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
+ if (enable > 1) {
+ dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);
+ } else {
+ dev_info(dev, "%s bridge\n",
+ (enable ? "enabling" : "disabling"));
+ ret = _alt_fpga2sdram_enable_set(priv, enable);
+ if (ret) {
+ fpga_bridge_unregister(&pdev->dev);
+ return ret;
+ }
+ }
+ }
+
+ return ret;
+}
+
+static int alt_fpga_bridge_remove(struct platform_device *pdev)
+{
+ fpga_bridge_unregister(&pdev->dev);
+
+ return 0;
+}
+
+MODULE_DEVICE_TABLE(of, altera_fpga_of_match);
+
+static struct platform_driver altera_fpga_driver = {
+ .probe = alt_fpga_bridge_probe,
+ .remove = alt_fpga_bridge_remove,
+ .driver = {
+ .name = "altera_fpga2sdram_bridge",
+ .of_match_table = of_match_ptr(altera_fpga_of_match),
+ },
+};
+
+module_platform_driver(altera_fpga_driver);
+
+MODULE_DESCRIPTION("Altera SoCFPGA FPGA to SDRAM Bridge");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/fpga/altera-hps2fpga.c b/drivers/fpga/altera-hps2fpga.c
new file mode 100644
index 0000000..4b354c7
--- /dev/null
+++ b/drivers/fpga/altera-hps2fpga.c
@@ -0,0 +1,222 @@
+/*
+ * FPGA to/from HPS Bridge Driver for Altera SoCFPGA Devices
+ *
+ * Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
+ *
+ * Includes this patch from the mailing list:
+ * fpga: altera-hps2fpga: fix HPS2FPGA bridge visibility to L3 masters
+ * Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This driver manages bridges on a Altera SOCFPGA between the ARM host
+ * processor system (HPS) and the embedded FPGA.
+ *
+ * This driver supports enabling and disabling of the configured ports, which
+ * allows for safe reprogramming of the FPGA, assuming that the new FPGA image
+ * uses the same port configuration. Bridges must be disabled before
+ * reprogramming the FPGA and re-enabled after the FPGA has been programmed.
+ */
+
+#include <linux/clk.h>
+#include <linux/fpga/fpga-bridge.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+
+#define ALT_L3_REMAP_OFST 0x0
+#define ALT_L3_REMAP_MPUZERO_MSK 0x00000001
+#define ALT_L3_REMAP_H2F_MSK 0x00000008
+#define ALT_L3_REMAP_LWH2F_MSK 0x00000010
+
+#define HPS2FPGA_BRIDGE_NAME "hps2fpga"
+#define LWHPS2FPGA_BRIDGE_NAME "lwhps2fpga"
+#define FPGA2HPS_BRIDGE_NAME "fpga2hps"
+
+struct altera_hps2fpga_data {
+ const char *name;
+ struct reset_control *bridge_reset;
+ struct regmap *l3reg;
+ unsigned int remap_mask;
+ struct clk *clk;
+};
+
+static int alt_hps2fpga_enable_show(struct fpga_bridge *bridge)
+{
+ struct altera_hps2fpga_data *priv = bridge->priv;
+
+ return reset_control_status(priv->bridge_reset);
+}
+
+/* The L3 REMAP register is write only, so keep a cached value. */
+static unsigned int l3_remap_shadow;
+static spinlock_t l3_remap_lock;
+
+static int _alt_hps2fpga_enable_set(struct altera_hps2fpga_data *priv,
+ bool enable)
+{
+ unsigned long flags;
+ int ret;
+
+ /* bring bridge out of reset */
+ if (enable)
+ ret = reset_control_deassert(priv->bridge_reset);
+ else
+ ret = reset_control_assert(priv->bridge_reset);
+ if (ret)
+ return ret;
+
+ /* Allow bridge to be visible to L3 masters or not */
+ if (priv->remap_mask) {
+ spin_lock_irqsave(&l3_remap_lock, flags);
+ l3_remap_shadow |= ALT_L3_REMAP_MPUZERO_MSK;
+
+ if (enable)
+ l3_remap_shadow |= priv->remap_mask;
+ else
+ l3_remap_shadow &= ~priv->remap_mask;
+
+ ret = regmap_write(priv->l3reg, ALT_L3_REMAP_OFST,
+ l3_remap_shadow);
+ spin_unlock_irqrestore(&l3_remap_lock, flags);
+ }
+
+ return ret;
+}
+
+static int alt_hps2fpga_enable_set(struct fpga_bridge *bridge, bool enable)
+{
+ return _alt_hps2fpga_enable_set(bridge->priv, enable);
+}
+
+static const struct fpga_bridge_ops altera_hps2fpga_br_ops = {
+ .enable_set = alt_hps2fpga_enable_set,
+ .enable_show = alt_hps2fpga_enable_show,
+};
+
+static struct altera_hps2fpga_data hps2fpga_data = {
+ .name = HPS2FPGA_BRIDGE_NAME,
+ .remap_mask = ALT_L3_REMAP_H2F_MSK,
+};
+
+static struct altera_hps2fpga_data lwhps2fpga_data = {
+ .name = LWHPS2FPGA_BRIDGE_NAME,
+ .remap_mask = ALT_L3_REMAP_LWH2F_MSK,
+};
+
+static struct altera_hps2fpga_data fpga2hps_data = {
+ .name = FPGA2HPS_BRIDGE_NAME,
+};
+
+static const struct of_device_id altera_fpga_of_match[] = {
+ { .compatible = "altr,socfpga-hps2fpga-bridge",
+ .data = &hps2fpga_data },
+ { .compatible = "altr,socfpga-lwhps2fpga-bridge",
+ .data = &lwhps2fpga_data },
+ { .compatible = "altr,socfpga-fpga2hps-bridge",
+ .data = &fpga2hps_data },
+ {},
+};
+
+static int alt_fpga_bridge_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct altera_hps2fpga_data *priv;
+ const struct of_device_id *of_id;
+ u32 enable;
+ int ret;
+
+ of_id = of_match_device(altera_fpga_of_match, dev);
+ priv = (struct altera_hps2fpga_data *)of_id->data;
+
+ priv->bridge_reset = of_reset_control_get_by_index(dev->of_node, 0);
+ if (IS_ERR(priv->bridge_reset)) {
+ dev_err(dev, "Could not get %s reset control\n", priv->name);
+ return PTR_ERR(priv->bridge_reset);
+ }
+
+ if (priv->remap_mask) {
+ priv->l3reg = syscon_regmap_lookup_by_compatible("altr,l3regs");
+ if (IS_ERR(priv->l3reg)) {
+ dev_err(dev, "regmap for altr,l3regs lookup failed\n");
+ return PTR_ERR(priv->l3reg);
+ }
+ }
+
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "no clock specified\n");
+ return PTR_ERR(priv->clk);
+ }
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret) {
+ dev_err(dev, "could not enable clock\n");
+ return -EBUSY;
+ }
+
+ spin_lock_init(&l3_remap_lock);
+
+ if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
+ if (enable > 1) {
+ dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);
+ } else {
+ dev_info(dev, "%s bridge\n",
+ (enable ? "enabling" : "disabling"));
+
+ ret = _alt_hps2fpga_enable_set(priv, enable);
+ if (ret) {
+ fpga_bridge_unregister(&pdev->dev);
+ return ret;
+ }
+ }
+ }
+
+ return fpga_bridge_register(dev, priv->name, &altera_hps2fpga_br_ops,
+ priv);
+}
+
+static int alt_fpga_bridge_remove(struct platform_device *pdev)
+{
+ struct fpga_bridge *bridge = platform_get_drvdata(pdev);
+ struct altera_hps2fpga_data *priv = bridge->priv;
+
+ fpga_bridge_unregister(&pdev->dev);
+
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+MODULE_DEVICE_TABLE(of, altera_fpga_of_match);
+
+static struct platform_driver alt_fpga_bridge_driver = {
+ .probe = alt_fpga_bridge_probe,
+ .remove = alt_fpga_bridge_remove,
+ .driver = {
+ .name = "altera_hps2fpga_bridge",
+ .of_match_table = of_match_ptr(altera_fpga_of_match),
+ },
+};
+
+module_platform_driver(alt_fpga_bridge_driver);
+
+MODULE_DESCRIPTION("Altera SoCFPGA HPS to FPGA Bridge");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
--
2.10.1
^ permalink raw reply related
* [PATCH v21 8/9] fpga: add altera freeze bridge support
From: Alan Tull @ 2016-10-25 14:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161025145540.3722-1-atull@opensource.altera.com>
Add a low level driver for Altera Freeze Bridges to the FPGA Bridge
framework. A freeze bridge is a bridge that exists in the FPGA
fabric to isolate one region of the FPGA from the busses while that
one region is being reprogrammed.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com>
---
v19: added in v19 of patchset as it needs for fpga info struct
v20: No change for this patch in v20 of patchset
v21: No change for this patch in v21 of patchset
---
drivers/fpga/Kconfig | 9 ++
drivers/fpga/Makefile | 1 +
drivers/fpga/altera-freeze-bridge.c | 273 ++++++++++++++++++++++++++++++++++++
3 files changed, 283 insertions(+)
create mode 100644 drivers/fpga/altera-freeze-bridge.c
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 5605ad6..8fe6a84 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -47,6 +47,15 @@ config SOCFPGA_FPGA_BRIDGE
Say Y to enable drivers for FPGA bridges for Altera SOCFPGA
devices.
+config ALTERA_FREEZE_BRIDGE
+ tristate "Altera FPGA Freeze Bridge"
+ depends on ARCH_SOCFPGA && FPGA_BRIDGE
+ help
+ Say Y to enable drivers for Altera FPGA Freeze bridges. A
+ freeze bridge is a bridge that exists in the FPGA fabric to
+ isolate one region of the FPGA from the busses while that
+ region is being reprogrammed.
+
endif # FPGA
endmenu
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index e658436..a6f874d 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
# FPGA Bridge Drivers
obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o
obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o
+obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o
# High Level Interfaces
obj-$(CONFIG_FPGA_REGION) += fpga-region.o
diff --git a/drivers/fpga/altera-freeze-bridge.c b/drivers/fpga/altera-freeze-bridge.c
new file mode 100644
index 0000000..8dcd9fb
--- /dev/null
+++ b/drivers/fpga/altera-freeze-bridge.c
@@ -0,0 +1,273 @@
+/*
+ * FPGA Freeze Bridge Controller
+ *
+ * Copyright (C) 2016 Altera Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/fpga/fpga-bridge.h>
+
+#define FREEZE_CSR_STATUS_OFFSET 0
+#define FREEZE_CSR_CTRL_OFFSET 4
+#define FREEZE_CSR_ILLEGAL_REQ_OFFSET 8
+#define FREEZE_CSR_REG_VERSION 12
+
+#define FREEZE_CSR_SUPPORTED_VERSION 2
+
+#define FREEZE_CSR_STATUS_FREEZE_REQ_DONE BIT(0)
+#define FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE BIT(1)
+
+#define FREEZE_CSR_CTRL_FREEZE_REQ BIT(0)
+#define FREEZE_CSR_CTRL_RESET_REQ BIT(1)
+#define FREEZE_CSR_CTRL_UNFREEZE_REQ BIT(2)
+
+#define FREEZE_BRIDGE_NAME "freeze"
+
+struct altera_freeze_br_data {
+ struct device *dev;
+ void __iomem *base_addr;
+ bool enable;
+};
+
+/*
+ * Poll status until status bit is set or we have a timeout.
+ */
+static int altera_freeze_br_req_ack(struct altera_freeze_br_data *priv,
+ u32 timeout, u32 req_ack)
+{
+ struct device *dev = priv->dev;
+ void __iomem *csr_illegal_req_addr = priv->base_addr +
+ FREEZE_CSR_ILLEGAL_REQ_OFFSET;
+ u32 status, illegal, ctrl;
+ int ret = -ETIMEDOUT;
+
+ do {
+ illegal = readl(csr_illegal_req_addr);
+ if (illegal) {
+ dev_err(dev, "illegal request detected 0x%x", illegal);
+
+ writel(1, csr_illegal_req_addr);
+
+ illegal = readl(csr_illegal_req_addr);
+ if (illegal)
+ dev_err(dev, "illegal request not cleared 0x%x",
+ illegal);
+
+ ret = -EINVAL;
+ break;
+ }
+
+ status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+ dev_dbg(dev, "%s %x %x\n", __func__, status, req_ack);
+ status &= req_ack;
+ if (status) {
+ ctrl = readl(priv->base_addr + FREEZE_CSR_CTRL_OFFSET);
+ dev_dbg(dev, "%s request %x acknowledged %x %x\n",
+ __func__, req_ack, status, ctrl);
+ ret = 0;
+ break;
+ }
+
+ udelay(1);
+ } while (timeout--);
+
+ if (ret == -ETIMEDOUT)
+ dev_err(dev, "%s timeout waiting for 0x%x\n",
+ __func__, req_ack);
+
+ return ret;
+}
+
+static int altera_freeze_br_do_freeze(struct altera_freeze_br_data *priv,
+ u32 timeout)
+{
+ struct device *dev = priv->dev;
+ void __iomem *csr_ctrl_addr = priv->base_addr +
+ FREEZE_CSR_CTRL_OFFSET;
+ u32 status;
+ int ret;
+
+ status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+
+ dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr));
+
+ if (status & FREEZE_CSR_STATUS_FREEZE_REQ_DONE) {
+ dev_dbg(dev, "%s bridge already disabled %d\n",
+ __func__, status);
+ return 0;
+ } else if (!(status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE)) {
+ dev_err(dev, "%s bridge not enabled %d\n", __func__, status);
+ return -EINVAL;
+ }
+
+ writel(FREEZE_CSR_CTRL_FREEZE_REQ, csr_ctrl_addr);
+
+ ret = altera_freeze_br_req_ack(priv, timeout,
+ FREEZE_CSR_STATUS_FREEZE_REQ_DONE);
+
+ if (ret)
+ writel(0, csr_ctrl_addr);
+ else
+ writel(FREEZE_CSR_CTRL_RESET_REQ, csr_ctrl_addr);
+
+ return ret;
+}
+
+static int altera_freeze_br_do_unfreeze(struct altera_freeze_br_data *priv,
+ u32 timeout)
+{
+ struct device *dev = priv->dev;
+ void __iomem *csr_ctrl_addr = priv->base_addr +
+ FREEZE_CSR_CTRL_OFFSET;
+ u32 status;
+ int ret;
+
+ writel(0, csr_ctrl_addr);
+
+ status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+
+ dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr));
+
+ if (status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE) {
+ dev_dbg(dev, "%s bridge already enabled %d\n",
+ __func__, status);
+ return 0;
+ } else if (!(status & FREEZE_CSR_STATUS_FREEZE_REQ_DONE)) {
+ dev_err(dev, "%s bridge not frozen %d\n", __func__, status);
+ return -EINVAL;
+ }
+
+ writel(FREEZE_CSR_CTRL_UNFREEZE_REQ, csr_ctrl_addr);
+
+ ret = altera_freeze_br_req_ack(priv, timeout,
+ FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE);
+
+ status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+
+ dev_dbg(dev, "%s %d %d\n", __func__, status, readl(csr_ctrl_addr));
+
+ writel(0, csr_ctrl_addr);
+
+ return ret;
+}
+
+/*
+ * enable = 1 : allow traffic through the bridge
+ * enable = 0 : disable traffic through the bridge
+ */
+static int altera_freeze_br_enable_set(struct fpga_bridge *bridge,
+ bool enable)
+{
+ struct altera_freeze_br_data *priv = bridge->priv;
+ struct fpga_image_info *info = bridge->info;
+ u32 timeout = 0;
+ int ret;
+
+ if (enable) {
+ if (info)
+ timeout = info->enable_timeout_us;
+
+ ret = altera_freeze_br_do_unfreeze(bridge->priv, timeout);
+ } else {
+ if (info)
+ timeout = info->disable_timeout_us;
+
+ ret = altera_freeze_br_do_freeze(bridge->priv, timeout);
+ }
+
+ if (!ret)
+ priv->enable = enable;
+
+ return ret;
+}
+
+static int altera_freeze_br_enable_show(struct fpga_bridge *bridge)
+{
+ struct altera_freeze_br_data *priv = bridge->priv;
+
+ return priv->enable;
+}
+
+static struct fpga_bridge_ops altera_freeze_br_br_ops = {
+ .enable_set = altera_freeze_br_enable_set,
+ .enable_show = altera_freeze_br_enable_show,
+};
+
+static const struct of_device_id altera_freeze_br_of_match[] = {
+ { .compatible = "altr,freeze-bridge-controller", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, altera_freeze_br_of_match);
+
+static int altera_freeze_br_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = pdev->dev.of_node;
+ struct altera_freeze_br_data *priv;
+ struct resource *res;
+ u32 status, revision;
+
+ if (!np)
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base_addr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->base_addr))
+ return PTR_ERR(priv->base_addr);
+
+ status = readl(priv->base_addr + FREEZE_CSR_STATUS_OFFSET);
+ if (status & FREEZE_CSR_STATUS_UNFREEZE_REQ_DONE)
+ priv->enable = 1;
+
+ revision = readl(priv->base_addr + FREEZE_CSR_REG_VERSION);
+ if (revision != FREEZE_CSR_SUPPORTED_VERSION)
+ dev_warn(dev,
+ "%s Freeze Controller unexpected revision %d != %d\n",
+ __func__, revision, FREEZE_CSR_SUPPORTED_VERSION);
+
+ return fpga_bridge_register(dev, FREEZE_BRIDGE_NAME,
+ &altera_freeze_br_br_ops, priv);
+}
+
+static int altera_freeze_br_remove(struct platform_device *pdev)
+{
+ fpga_bridge_unregister(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver altera_freeze_br_driver = {
+ .probe = altera_freeze_br_probe,
+ .remove = altera_freeze_br_remove,
+ .driver = {
+ .name = "altera_freeze_br",
+ .of_match_table = of_match_ptr(altera_freeze_br_of_match),
+ },
+};
+
+module_platform_driver(altera_freeze_br_driver);
+
+MODULE_DESCRIPTION("Altera Freeze Bridge");
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_LICENSE("GPL v2");
--
2.10.1
^ permalink raw reply related
* [PATCH v21 9/9] fpga-manager: Add Socfpga Arria10 support
From: Alan Tull @ 2016-10-25 14:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161025145540.3722-1-atull@opensource.altera.com>
Add low level driver to support reprogramming FPGAs for Altera
SoCFPGA Arria10.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
---
v19: Added to this patchset as has been changed to use
fpga image information struct
a checkpatch fix of a block comment
do not use clk_put because we are using devm_clk_get
v20: use regmap_read_poll_timeout
Add some macros/comments
remove some debug prints
v21: Add Moritz' reviewed-by
---
drivers/fpga/Kconfig | 6 +
drivers/fpga/Makefile | 1 +
drivers/fpga/socfpga-a10.c | 556 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 563 insertions(+)
create mode 100644 drivers/fpga/socfpga-a10.c
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 8fe6a84..889e4c3 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -26,6 +26,12 @@ config FPGA_MGR_SOCFPGA
help
FPGA manager driver support for Altera SOCFPGA.
+config FPGA_MGR_SOCFPGA_A10
+ tristate "Altera SoCFPGA Arria10"
+ depends on ARCH_SOCFPGA
+ help
+ FPGA manager driver support for Altera Arria10 SoCFPGA.
+
config FPGA_MGR_ZYNQ_FPGA
tristate "Xilinx Zynq FPGA"
depends on ARCH_ZYNQ || COMPILE_TEST
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index a6f874d..8df07bc 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_FPGA) += fpga-mgr.o
# FPGA Manager Drivers
obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o
+obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o
obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
# FPGA Bridge Drivers
diff --git a/drivers/fpga/socfpga-a10.c b/drivers/fpga/socfpga-a10.c
new file mode 100644
index 0000000..ccd9fb2
--- /dev/null
+++ b/drivers/fpga/socfpga-a10.c
@@ -0,0 +1,556 @@
+/*
+ * FPGA Manager Driver for Altera Arria10 SoCFPGA
+ *
+ * Copyright (C) 2015-2016 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+#define A10_FPGAMGR_DCLKCNT_OFST 0x08
+#define A10_FPGAMGR_DCLKSTAT_OFST 0x0c
+#define A10_FPGAMGR_IMGCFG_CTL_00_OFST 0x70
+#define A10_FPGAMGR_IMGCFG_CTL_01_OFST 0x74
+#define A10_FPGAMGR_IMGCFG_CTL_02_OFST 0x78
+#define A10_FPGAMGR_IMGCFG_STAT_OFST 0x80
+
+#define A10_FPGAMGR_DCLKSTAT_DCLKDONE BIT(0)
+
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG BIT(0)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NSTATUS BIT(1)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_CONDONE BIT(2)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG BIT(8)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_NSTATUS_OE BIT(16)
+#define A10_FPGAMGR_IMGCFG_CTL_00_S2F_CONDONE_OE BIT(24)
+
+#define A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG BIT(0)
+#define A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST BIT(16)
+#define A10_FPGAMGR_IMGCFG_CTL_01_S2F_NCE BIT(24)
+
+#define A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL BIT(0)
+#define A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_MASK (BIT(16) | BIT(17))
+#define A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SHIFT 16
+#define A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH BIT(24)
+#define A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SHIFT 24
+
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_CRC_ERROR BIT(0)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_EARLY_USERMODE BIT(1)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_USERMODE BIT(2)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN BIT(4)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN BIT(6)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_PR_READY BIT(9)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_PR_DONE BIT(10)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_PR_ERROR BIT(11)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_NCONFIG_PIN BIT(12)
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_MASK (BIT(16) | BIT(17) | BIT(18))
+#define A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_SHIFT 16
+
+/* FPGA CD Ratio Value */
+#define CDRATIO_x1 0x0
+#define CDRATIO_x2 0x1
+#define CDRATIO_x4 0x2
+#define CDRATIO_x8 0x3
+
+/* Configuration width 16/32 bit */
+#define CFGWDTH_32 1
+#define CFGWDTH_16 0
+
+/*
+ * struct a10_fpga_priv - private data for fpga manager
+ * @regmap: regmap for register access
+ * @fpga_data_addr: iomap for single address data register to FPGA
+ * @clk: clock
+ */
+struct a10_fpga_priv {
+ struct regmap *regmap;
+ void __iomem *fpga_data_addr;
+ struct clk *clk;
+};
+
+static bool socfpga_a10_fpga_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case A10_FPGAMGR_DCLKCNT_OFST:
+ case A10_FPGAMGR_DCLKSTAT_OFST:
+ case A10_FPGAMGR_IMGCFG_CTL_00_OFST:
+ case A10_FPGAMGR_IMGCFG_CTL_01_OFST:
+ case A10_FPGAMGR_IMGCFG_CTL_02_OFST:
+ return true;
+ }
+ return false;
+}
+
+static bool socfpga_a10_fpga_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case A10_FPGAMGR_DCLKCNT_OFST:
+ case A10_FPGAMGR_DCLKSTAT_OFST:
+ case A10_FPGAMGR_IMGCFG_CTL_00_OFST:
+ case A10_FPGAMGR_IMGCFG_CTL_01_OFST:
+ case A10_FPGAMGR_IMGCFG_CTL_02_OFST:
+ case A10_FPGAMGR_IMGCFG_STAT_OFST:
+ return true;
+ }
+ return false;
+}
+
+static const struct regmap_config socfpga_a10_fpga_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .writeable_reg = socfpga_a10_fpga_writeable_reg,
+ .readable_reg = socfpga_a10_fpga_readable_reg,
+ .max_register = A10_FPGAMGR_IMGCFG_STAT_OFST,
+ .cache_type = REGCACHE_NONE,
+};
+
+/*
+ * from the register map description of cdratio in imgcfg_ctrl_02:
+ * Normal Configuration : 32bit Passive Parallel
+ * Partial Reconfiguration : 16bit Passive Parallel
+ */
+static void socfpga_a10_fpga_set_cfg_width(struct a10_fpga_priv *priv,
+ int width)
+{
+ width <<= A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SHIFT;
+
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH, width);
+}
+
+static void socfpga_a10_fpga_generate_dclks(struct a10_fpga_priv *priv,
+ u32 count)
+{
+ u32 val;
+
+ /* Clear any existing DONE status. */
+ regmap_write(priv->regmap, A10_FPGAMGR_DCLKSTAT_OFST,
+ A10_FPGAMGR_DCLKSTAT_DCLKDONE);
+
+ /* Issue the DCLK regmap. */
+ regmap_write(priv->regmap, A10_FPGAMGR_DCLKCNT_OFST, count);
+
+ /* wait till the dclkcnt done */
+ regmap_read_poll_timeout(priv->regmap, A10_FPGAMGR_DCLKSTAT_OFST, val,
+ val, 1, 100);
+
+ /* Clear DONE status. */
+ regmap_write(priv->regmap, A10_FPGAMGR_DCLKSTAT_OFST,
+ A10_FPGAMGR_DCLKSTAT_DCLKDONE);
+}
+
+#define RBF_ENCRYPTION_MODE_OFFSET 69
+#define RBF_DECOMPRESS_OFFSET 229
+
+static int socfpga_a10_fpga_encrypted(u32 *buf32, size_t buf32_size)
+{
+ if (buf32_size < RBF_ENCRYPTION_MODE_OFFSET + 1)
+ return -EINVAL;
+
+ /* Is the bitstream encrypted? */
+ return ((buf32[RBF_ENCRYPTION_MODE_OFFSET] >> 2) & 3) != 0;
+}
+
+static int socfpga_a10_fpga_compressed(u32 *buf32, size_t buf32_size)
+{
+ if (buf32_size < RBF_DECOMPRESS_OFFSET + 1)
+ return -EINVAL;
+
+ /* Is the bitstream compressed? */
+ return !((buf32[RBF_DECOMPRESS_OFFSET] >> 1) & 1);
+}
+
+static unsigned int socfpga_a10_fpga_get_cd_ratio(unsigned int cfg_width,
+ bool encrypt, bool compress)
+{
+ unsigned int cd_ratio;
+
+ /*
+ * cd ratio is dependent on cfg width and whether the bitstream
+ * is encrypted and/or compressed.
+ *
+ * | width | encr. | compr. | cd ratio |
+ * | 16 | 0 | 0 | 1 |
+ * | 16 | 0 | 1 | 4 |
+ * | 16 | 1 | 0 | 2 |
+ * | 16 | 1 | 1 | 4 |
+ * | 32 | 0 | 0 | 1 |
+ * | 32 | 0 | 1 | 8 |
+ * | 32 | 1 | 0 | 4 |
+ * | 32 | 1 | 1 | 8 |
+ */
+ if (!compress && !encrypt)
+ return CDRATIO_x1;
+
+ if (compress)
+ cd_ratio = CDRATIO_x4;
+ else
+ cd_ratio = CDRATIO_x2;
+
+ /* If 32 bit, double the cd ratio by incrementing the field */
+ if (cfg_width == CFGWDTH_32)
+ cd_ratio += 1;
+
+ return cd_ratio;
+}
+
+static int socfpga_a10_fpga_set_cdratio(struct fpga_manager *mgr,
+ unsigned int cfg_width,
+ const char *buf, size_t count)
+{
+ struct a10_fpga_priv *priv = mgr->priv;
+ unsigned int cd_ratio;
+ int encrypt, compress;
+
+ encrypt = socfpga_a10_fpga_encrypted((u32 *)buf, count / 4);
+ if (encrypt < 0)
+ return -EINVAL;
+
+ compress = socfpga_a10_fpga_compressed((u32 *)buf, count / 4);
+ if (compress < 0)
+ return -EINVAL;
+
+ cd_ratio = socfpga_a10_fpga_get_cd_ratio(cfg_width, encrypt, compress);
+
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_MASK,
+ cd_ratio << A10_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SHIFT);
+
+ return 0;
+}
+
+static u32 socfpga_a10_fpga_read_stat(struct a10_fpga_priv *priv)
+{
+ u32 val;
+
+ regmap_read(priv->regmap, A10_FPGAMGR_IMGCFG_STAT_OFST, &val);
+
+ return val;
+}
+
+static int socfpga_a10_fpga_wait_for_pr_ready(struct a10_fpga_priv *priv)
+{
+ u32 reg, i;
+
+ for (i = 0; i < 10 ; i++) {
+ reg = socfpga_a10_fpga_read_stat(priv);
+
+ if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_ERROR)
+ return -EINVAL;
+
+ if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_READY)
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int socfpga_a10_fpga_wait_for_pr_done(struct a10_fpga_priv *priv)
+{
+ u32 reg, i;
+
+ for (i = 0; i < 10 ; i++) {
+ reg = socfpga_a10_fpga_read_stat(priv);
+
+ if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_ERROR)
+ return -EINVAL;
+
+ if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_DONE)
+ return 0;
+ }
+
+ return -ETIMEDOUT;
+}
+
+/* Start the FPGA programming by initialize the FPGA Manager */
+static int socfpga_a10_fpga_write_init(struct fpga_manager *mgr,
+ struct fpga_image_info *info,
+ const char *buf, size_t count)
+{
+ struct a10_fpga_priv *priv = mgr->priv;
+ unsigned int cfg_width;
+ u32 msel, stat, mask;
+ int ret;
+
+ if (info->flags & FPGA_MGR_PARTIAL_RECONFIG)
+ cfg_width = CFGWDTH_16;
+ else
+ return -EINVAL;
+
+ /* Check for passive parallel (msel == 000 or 001) */
+ msel = socfpga_a10_fpga_read_stat(priv);
+ msel &= A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_MASK;
+ msel >>= A10_FPGAMGR_IMGCFG_STAT_F2S_MSEL_SHIFT;
+ if ((msel != 0) && (msel != 1)) {
+ dev_dbg(&mgr->dev, "Fail: invalid msel=%d\n", msel);
+ return -EINVAL;
+ }
+
+ /* Make sure no external devices are interfering */
+ stat = socfpga_a10_fpga_read_stat(priv);
+ mask = A10_FPGAMGR_IMGCFG_STAT_F2S_NCONFIG_PIN |
+ A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN;
+ if ((stat & mask) != mask)
+ return -EINVAL;
+
+ /* Set cfg width */
+ socfpga_a10_fpga_set_cfg_width(priv, cfg_width);
+
+ /* Determine cd ratio from bitstream header and set cd ratio */
+ ret = socfpga_a10_fpga_set_cdratio(mgr, cfg_width, buf, count);
+ if (ret)
+ return ret;
+
+ /*
+ * Clear s2f_nce to enable chip select. Leave pr_request
+ * unasserted and override disabled.
+ */
+ regmap_write(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG);
+
+ /* Set cfg_ctrl to enable s2f dclk and data */
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL,
+ A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL);
+
+ /*
+ * Disable overrides not needed for pr.
+ * s2f_config==1 leaves reset deasseted.
+ */
+ regmap_write(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_00_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG |
+ A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NSTATUS |
+ A10_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_CONDONE |
+ A10_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG);
+
+ /* Enable override for data, dclk, nce, and pr_request to CSS */
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG, 0);
+
+ /* Send some clocks to clear out any errors */
+ socfpga_a10_fpga_generate_dclks(priv, 256);
+
+ /* Assert pr_request */
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST);
+
+ /* Provide 2048 DCLKs before starting the config data streaming. */
+ socfpga_a10_fpga_generate_dclks(priv, 0x7ff);
+
+ /* Wait for pr_ready */
+ return socfpga_a10_fpga_wait_for_pr_ready(priv);
+}
+
+/*
+ * write data to the FPGA data register
+ */
+static int socfpga_a10_fpga_write(struct fpga_manager *mgr, const char *buf,
+ size_t count)
+{
+ struct a10_fpga_priv *priv = mgr->priv;
+ u32 *buffer_32 = (u32 *)buf;
+ size_t i = 0;
+
+ if (count <= 0)
+ return -EINVAL;
+
+ /* Write out the complete 32-bit chunks */
+ while (count >= sizeof(u32)) {
+ writel(buffer_32[i++], priv->fpga_data_addr);
+ count -= sizeof(u32);
+ }
+
+ /* Write out remaining non 32-bit chunks */
+ switch (count) {
+ case 3:
+ writel(buffer_32[i++] & 0x00ffffff, priv->fpga_data_addr);
+ break;
+ case 2:
+ writel(buffer_32[i++] & 0x0000ffff, priv->fpga_data_addr);
+ break;
+ case 1:
+ writel(buffer_32[i++] & 0x000000ff, priv->fpga_data_addr);
+ break;
+ case 0:
+ break;
+ default:
+ /* This will never happen */
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int socfpga_a10_fpga_write_complete(struct fpga_manager *mgr,
+ struct fpga_image_info *info)
+{
+ struct a10_fpga_priv *priv = mgr->priv;
+ u32 reg;
+ int ret;
+
+ /* Wait for pr_done */
+ ret = socfpga_a10_fpga_wait_for_pr_done(priv);
+
+ /* Clear pr_request */
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST, 0);
+
+ /* Send some clocks to clear out any errors */
+ socfpga_a10_fpga_generate_dclks(priv, 256);
+
+ /* Disable s2f dclk and data */
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_02_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL, 0);
+
+ /* Deassert chip select */
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_NCE,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_NCE);
+
+ /* Disable data, dclk, nce, and pr_request override to CSS */
+ regmap_update_bits(priv->regmap, A10_FPGAMGR_IMGCFG_CTL_01_OFST,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG,
+ A10_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG);
+
+ /* Return any errors regarding pr_done or pr_error */
+ if (ret)
+ return ret;
+
+ /* Final check */
+ reg = socfpga_a10_fpga_read_stat(priv);
+
+ if (((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_USERMODE) == 0) ||
+ ((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN) == 0) ||
+ ((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN) == 0)) {
+ dev_dbg(&mgr->dev,
+ "Timeout in final check. Status=%08xf\n", reg);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static enum fpga_mgr_states socfpga_a10_fpga_state(struct fpga_manager *mgr)
+{
+ struct a10_fpga_priv *priv = mgr->priv;
+ u32 reg = socfpga_a10_fpga_read_stat(priv);
+
+ if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_USERMODE)
+ return FPGA_MGR_STATE_OPERATING;
+
+ if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_PR_READY)
+ return FPGA_MGR_STATE_WRITE;
+
+ if (reg & A10_FPGAMGR_IMGCFG_STAT_F2S_CRC_ERROR)
+ return FPGA_MGR_STATE_WRITE_COMPLETE_ERR;
+
+ if ((reg & A10_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN) == 0)
+ return FPGA_MGR_STATE_RESET;
+
+ return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static const struct fpga_manager_ops socfpga_a10_fpga_mgr_ops = {
+ .state = socfpga_a10_fpga_state,
+ .write_init = socfpga_a10_fpga_write_init,
+ .write = socfpga_a10_fpga_write,
+ .write_complete = socfpga_a10_fpga_write_complete,
+};
+
+static int socfpga_a10_fpga_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct a10_fpga_priv *priv;
+ void __iomem *reg_base;
+ struct resource *res;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ /* First mmio base is for register access */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(reg_base))
+ return PTR_ERR(reg_base);
+
+ /* Second mmio base is for writing FPGA image data */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ priv->fpga_data_addr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->fpga_data_addr))
+ return PTR_ERR(priv->fpga_data_addr);
+
+ /* regmap for register access */
+ priv->regmap = devm_regmap_init_mmio(dev, reg_base,
+ &socfpga_a10_fpga_regmap_config);
+ if (IS_ERR(priv->regmap))
+ return -ENODEV;
+
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "no clock specified\n");
+ return PTR_ERR(priv->clk);
+ }
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret) {
+ dev_err(dev, "could not enable clock\n");
+ return -EBUSY;
+ }
+
+ return fpga_mgr_register(dev, "SoCFPGA Arria10 FPGA Manager",
+ &socfpga_a10_fpga_mgr_ops, priv);
+}
+
+static int socfpga_a10_fpga_remove(struct platform_device *pdev)
+{
+ struct fpga_manager *mgr = platform_get_drvdata(pdev);
+ struct a10_fpga_priv *priv = mgr->priv;
+
+ fpga_mgr_unregister(&pdev->dev);
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+static const struct of_device_id socfpga_a10_fpga_of_match[] = {
+ { .compatible = "altr,socfpga-a10-fpga-mgr", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, socfpga_a10_fpga_of_match);
+
+static struct platform_driver socfpga_a10_fpga_driver = {
+ .probe = socfpga_a10_fpga_probe,
+ .remove = socfpga_a10_fpga_remove,
+ .driver = {
+ .name = "socfpga_a10_fpga_manager",
+ .of_match_table = socfpga_a10_fpga_of_match,
+ },
+};
+
+module_platform_driver(socfpga_a10_fpga_driver);
+
+MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
+MODULE_DESCRIPTION("SoCFPGA Arria10 FPGA Manager");
+MODULE_LICENSE("GPL v2");
--
2.10.1
^ permalink raw reply related
* [PATCH/RFT v2 09/17] regulator: fixed: Add over current event
From: Axel Haslam @ 2016-10-25 14:57 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161025143304.GW17252@sirena.org.uk>
On Tue, Oct 25, 2016 at 4:33 PM, Mark Brown <broonie@kernel.org> wrote:
> On Tue, Oct 25, 2016 at 02:55:48PM +0200, Axel Haslam wrote:
>
>> To be able to use regulator to handle the overcurrent pin, i need to be able
>> to somehow retrieve the over current pin state from the regulator driver.
>
> What makes you say that, none of the existing users need this?
>
>> As i was trying your suggestion, i remembered why i thought i should use
>> mode instead of status: Status seems to be for internal regulator driver use,
>> there is no regulator_get_status, function and REGULATOR_STATUS_* are defined
>> in driver.h and not in consumer.h as REGULATOR_MODE_*
>
>> Would you be ok if i allow consumers to get the status via a new
>> "regulator_get_status" call?
>
> What would they do with this information that they can't do with the
> existing error notification?
the usb core relies in two flags that need too be set properly, one is the
over-current indicator RH_PS_POCI , and the other is the over current
indicator "change" (RH_PS_OCIC).
The idea was to use the notification to set the over current indicator
"change" flag,
which will happen for both rising and falling edges. And to use
get_status or get_mode
to set the over-current indicator flag which should reflect the actual
pin status.
-Axel.
^ permalink raw reply
* [PATCH/RFT v2 09/17] regulator: fixed: Add over current event
From: Axel Haslam @ 2016-10-25 15:07 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CAKXjFTOz=TGCiKic77JXdJMUoobLY4Ye9QnqajbG4JTh=VGUFg@mail.gmail.com>
On Tue, Oct 25, 2016 at 4:57 PM, Axel Haslam <ahaslam@baylibre.com> wrote:
> On Tue, Oct 25, 2016 at 4:33 PM, Mark Brown <broonie@kernel.org> wrote:
>> On Tue, Oct 25, 2016 at 02:55:48PM +0200, Axel Haslam wrote:
>>
>>> To be able to use regulator to handle the overcurrent pin, i need to be able
>>> to somehow retrieve the over current pin state from the regulator driver.
>>
>> What makes you say that, none of the existing users need this?
>>
>>> As i was trying your suggestion, i remembered why i thought i should use
>>> mode instead of status: Status seems to be for internal regulator driver use,
>>> there is no regulator_get_status, function and REGULATOR_STATUS_* are defined
>>> in driver.h and not in consumer.h as REGULATOR_MODE_*
>>
>>> Would you be ok if i allow consumers to get the status via a new
>>> "regulator_get_status" call?
>>
>> What would they do with this information that they can't do with the
>> existing error notification?
>
> the usb core relies in two flags that need too be set properly, one is the
> over-current indicator RH_PS_POCI , and the other is the over current
> indicator "change" (RH_PS_OCIC).
>
> The idea was to use the notification to set the over current indicator
> "change" flag,
> which will happen for both rising and falling edges. And to use
> get_status or get_mode
> to set the over-current indicator flag which should reflect the actual
> pin status.
>
BTW, for the notification, i should have used a new event flag
something like: OVER_CURRENT_CHANGED and not just OVER_CURRENT
Regards
Axel
>
> -Axel.
^ permalink raw reply
* [PATCH v3 00/14] ACPI platform MSI, interrupt producer/consumer and its example mbi-gen
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
From: Hanjun Guo <hanjun.guo@linaro.org>
This patch series is v3 of a previous posting,
https://lkml.org/lkml/2016/9/14/510
v2 -> v3:
- Drop RFC tag
- Rebase against v4.9-rc2 and Lorenzo's v6 of ACPI IORT ARM SMMU support [1]
- Add 3 cleanup patches (patch 1, 2, 3)
- Drop arch_init call patch from last version
- Introduce a callback for platform device to set msi domain
- Introduce a new API to get paltform device's domain instead of
reusing the PCI one in previous version
- Add a patch to rework iort_node_get_id()
[1]: http://www.mail-archive.com/linux-kernel at vger.kernel.org/msg1251993.html
v2 -> v1:
- Fix the bug of if multi Interrupt() resoures in single _PRS,
we need to calculate all the irq numbers (I missed it in previous
version);
- Rebased on Marc's irq/irqchip-4.9 branch and Lorenzo's v5
SMMU patches (also Robin's SMMu patches)
- Add patch irqchip: mbigen: promote mbigen init.
With platform msi support landed in the kernel, and the introduction
of IORT for GICv3 ITS (PCI MSI) [1], the framework for platform msi
is ready, this patch set add few patches to enable the ACPI platform
msi support.
For platform device connecting to ITS on arm platform, we have IORT
table with the named componant node to describe the mappings of paltform
device and ITS, so we can retrieve the dev id and find its parent
irqdomain (ITS) from IORT table (simlar with the ACPI ITS support).
With acpi platform msi supported, we add the ACPI support for irqchip
mbi-gen, which use this framework to form its stacked irqdomain, below
is the mbi-gen's topology in the system:
| ---------------| |------------------|
| | MSI | | wired interrupt(s)
| ITS |<-----------------| MBI-GEN |<----------------------------- IO device(s)
| | | |<----------------------------- IO device(s)
------------------ -------------------
So with ACPI platform MSI support, we can build the stacked domain for
mbi-gen which represented its mappings with the named componant in IORT,
but we still missing the connectings of devices to mbi-gen as in ACPI
world devices connect to main interrupt controller in MADT in default.
In ACPI 6.1, section 19.6.62, Interrupt Resource Descriptor Macro,
Interrupt (ResourceUsage, EdgeLevel, ActiveLevel, Shared,
ResourceSourceIndex, ResourceSource, DescriptorName)
{ InterruptList } => Buffer
For the arguement ResourceUsage and DescriptorName, which means:
ResourceUsage describes whether the device consumes the specified
interrupt ( ResourceConsumer ) or produces it for use by a child
device ( ResourceProducer ).
If nothing is specified, then ResourceConsumer is assumed.
DescriptorName evaluates to a name string which refers to the
entire resource descriptor.
So it can be used for devices connecting to a specific interrupt
prodcucer instead of the main interrupt controller in MADT, we can
define:
Interrupt(ResourceConsumer,..., "\_SB.IRQP") {12,14,....},
then get the interrupt producer with the full path name "\_SB.IRQP".
Thanks
Hanjun
Hanjun Guo (12):
ACPI: ARM64: IORT: minor cleanup for iort_match_node_callback()
irqchip: gic-v3-its: keep the head file include in alphabetic order
ACPI: ARM64: IORT: add missing comment for iort_dev_find_its_id()
irqchip: gicv3-its: platform-msi: refactor its_pmsi_prepare()
ACPI: platform-msi: retrieve dev id from IORT
irqchip: gicv3-its: platform-msi: refactor its_pmsi_init() to prepare
for ACPI
irqchip: gicv3-its: platform-msi: scan MADT to create platform msi
domain
ACPI: ARM64: IORT: rework iort_node_get_id()
ACPI: platform: setup MSI domain for ACPI based platform device
msi: platform: make platform_msi_create_device_domain() ACPI aware
ACPI: irq: introduce interrupt producer
irqchip: mbigen: Add ACPI support
Kefeng Wang (2):
irqchip: mbigen: drop module owner
irqchip: mbigen: introduce mbigen_of_create_domain()
drivers/acpi/acpi_platform.c | 11 +++
drivers/acpi/arm64/iort.c | 83 ++++++++++++++++++--
drivers/acpi/gsi.c | 10 ++-
drivers/acpi/resource.c | 85 ++++++++++++++------
drivers/base/platform-msi.c | 3 +-
drivers/base/platform.c | 3 +
drivers/irqchip/irq-gic-v3-its-platform-msi.c | 106 +++++++++++++++++++------
drivers/irqchip/irq-gic-v3-its.c | 3 +-
drivers/irqchip/irq-mbigen.c | 109 ++++++++++++++++++++++----
include/acpi/acpi_bus.h | 1 +
include/linux/acpi_iort.h | 11 +++
include/linux/platform_device.h | 3 +
12 files changed, 346 insertions(+), 82 deletions(-)
--
1.7.12.4
^ permalink raw reply
* [PATCH v3 01/14] ACPI: ARM64: IORT: minor cleanup for iort_match_node_callback()
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477408169-22217-1-git-send-email-guohanjun@huawei.com>
From: Hanjun Guo <hanjun.guo@linaro.org>
Cleanup iort_match_node_callback() a little bit to reduce
some lines of code, aslo fix the indentation in iort_scan_node().
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
---
drivers/acpi/arm64/iort.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 5741bfd..ee68cfc 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -225,7 +225,7 @@ static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type,
if (iort_node->type == type &&
ACPI_SUCCESS(callback(iort_node, context)))
- return iort_node;
+ return iort_node;
iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node,
iort_node->length);
@@ -253,17 +253,15 @@ static acpi_status iort_match_node_callback(struct acpi_iort_node *node,
void *context)
{
struct device *dev = context;
- acpi_status status;
+ acpi_status status = AE_NOT_FOUND;
if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) {
struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
struct acpi_iort_named_component *ncomp;
- if (!adev) {
- status = AE_NOT_FOUND;
+ if (!adev)
goto out;
- }
status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buf);
if (ACPI_FAILURE(status)) {
@@ -289,8 +287,6 @@ static acpi_status iort_match_node_callback(struct acpi_iort_node *node,
*/
status = pci_rc->pci_segment_number == pci_domain_nr(bus) ?
AE_OK : AE_NOT_FOUND;
- } else {
- status = AE_NOT_FOUND;
}
out:
return status;
--
1.7.12.4
^ permalink raw reply related
* [PATCH v3 02/14] irqchip: gic-v3-its: keep the head file include in alphabetic order
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477408169-22217-1-git-send-email-guohanjun@huawei.com>
From: Hanjun Guo <hanjun.guo@linaro.org>
The head file is strictly in alphabetic order now, so let's
be the rule breaker. As acpi_iort.h includes acpi.h so remove
the duplidate acpi.h inclusion as well.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
---
drivers/irqchip/irq-gic-v3-its.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index c5dee30..1508bf4 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -15,14 +15,13 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/acpi.h>
+#include <linux/acpi_iort.h>
#include <linux/bitmap.h>
#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/dma-iommu.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
-#include <linux/acpi_iort.h>
#include <linux/log2.h>
#include <linux/mm.h>
#include <linux/msi.h>
--
1.7.12.4
^ permalink raw reply related
* [PATCH v3 03/14] ACPI: ARM64: IORT: add missing comment for iort_dev_find_its_id()
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477408169-22217-1-git-send-email-guohanjun@huawei.com>
From: Hanjun Guo <hanjun.guo@linaro.org>
We are missing req_id's comment for iort_dev_find_its_id(),
add it back.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
---
drivers/acpi/arm64/iort.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index ee68cfc..03bae2c 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -446,6 +446,7 @@ u32 iort_msi_map_rid(struct device *dev, u32 req_id)
/**
* iort_dev_find_its_id() - Find the ITS identifier for a device
* @dev: The device.
+ * @req_id: Device's Requster ID
* @idx: Index of the ITS identifier list.
* @its_id: ITS identifier.
*
--
1.7.12.4
^ permalink raw reply related
* [PATCH v3 04/14] irqchip: gicv3-its: platform-msi: refactor its_pmsi_prepare()
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477408169-22217-1-git-send-email-guohanjun@huawei.com>
From: Hanjun Guo <hanjun.guo@linaro.org>
Adding ACPI support for platform MSI, we need to retrieve the
dev id in ACPI way instead of device tree, we already have
a well formed function its_pmsi_prepare() to get the dev id
but it's OF dependent, so collect OF related code and put them
into a single function to make its_pmsi_prepare() more friendly
to ACPI later.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Sinan Kaya <okaya@codeaurora.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
drivers/irqchip/irq-gic-v3-its-platform-msi.c | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)
diff --git a/drivers/irqchip/irq-gic-v3-its-platform-msi.c b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
index 470b4aa..3c94278 100644
--- a/drivers/irqchip/irq-gic-v3-its-platform-msi.c
+++ b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
@@ -24,15 +24,11 @@
.name = "ITS-pMSI",
};
-static int its_pmsi_prepare(struct irq_domain *domain, struct device *dev,
- int nvec, msi_alloc_info_t *info)
+static int of_pmsi_get_dev_id(struct irq_domain *domain, struct device *dev,
+ u32 *dev_id)
{
- struct msi_domain_info *msi_info;
- u32 dev_id;
int ret, index = 0;
- msi_info = msi_get_domain_info(domain->parent);
-
/* Suck the DeviceID out of the msi-parent property */
do {
struct of_phandle_args args;
@@ -43,11 +39,24 @@ static int its_pmsi_prepare(struct irq_domain *domain, struct device *dev,
if (args.np == irq_domain_get_of_node(domain)) {
if (WARN_ON(args.args_count != 1))
return -EINVAL;
- dev_id = args.args[0];
+ *dev_id = args.args[0];
break;
}
} while (!ret);
+ return ret;
+}
+
+static int its_pmsi_prepare(struct irq_domain *domain, struct device *dev,
+ int nvec, msi_alloc_info_t *info)
+{
+ struct msi_domain_info *msi_info;
+ u32 dev_id;
+ int ret;
+
+ msi_info = msi_get_domain_info(domain->parent);
+
+ ret = of_pmsi_get_dev_id(domain, dev, &dev_id);
if (ret)
return ret;
--
1.7.12.4
^ permalink raw reply related
* [PATCH v3 05/14] ACPI: platform-msi: retrieve dev id from IORT
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477408169-22217-1-git-send-email-guohanjun@huawei.com>
From: Hanjun Guo <hanjun.guo@linaro.org>
For devices connecting to ITS, it needs dev id to identify
itself, and this dev id is represented in the IORT table in
named componant node [1] for platform devices, so in this
patch we will scan the IORT to retrieve device's dev id.
Introduce iort_pmsi_get_dev_id() with pointer dev passed
in for that purpose.
[1]: https://static.docs.arm.com/den0049/b/DEN0049B_IO_Remapping_Table.pdf
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Sinan Kaya <okaya@codeaurora.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
drivers/acpi/arm64/iort.c | 26 ++++++++++++++++++++++++++
drivers/irqchip/irq-gic-v3-its-platform-msi.c | 4 +++-
include/linux/acpi_iort.h | 8 ++++++++
3 files changed, 37 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 03bae2c..7d543aa 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -444,6 +444,32 @@ u32 iort_msi_map_rid(struct device *dev, u32 req_id)
}
/**
+ * iort_pmsi_get_dev_id() - Get the device id for a device
+ * @dev: The device for which the mapping is to be done.
+ * @dev_id: The device ID found.
+ *
+ * Returns: 0 for successful find a dev id, errors otherwise
+ */
+int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id)
+{
+ struct acpi_iort_node *node;
+
+ if (!iort_table)
+ return -ENODEV;
+
+ node = iort_find_dev_node(dev);
+ if (!node) {
+ dev_err(dev, "can't find related IORT node\n");
+ return -ENODEV;
+ }
+
+ if(!iort_node_get_id(node, dev_id, IORT_MSI_TYPE, 0))
+ return -ENODEV;
+
+ return 0;
+}
+
+/**
* iort_dev_find_its_id() - Find the ITS identifier for a device
* @dev: The device.
* @req_id: Device's Requster ID
diff --git a/drivers/irqchip/irq-gic-v3-its-platform-msi.c b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
index 3c94278..16587a9 100644
--- a/drivers/irqchip/irq-gic-v3-its-platform-msi.c
+++ b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
@@ -15,6 +15,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/acpi_iort.h>
#include <linux/device.h>
#include <linux/msi.h>
#include <linux/of.h>
@@ -56,7 +57,8 @@ static int its_pmsi_prepare(struct irq_domain *domain, struct device *dev,
msi_info = msi_get_domain_info(domain->parent);
- ret = of_pmsi_get_dev_id(domain, dev, &dev_id);
+ ret = dev->of_node ? of_pmsi_get_dev_id(domain, dev, &dev_id) :
+ iort_pmsi_get_dev_id(dev, &dev_id);
if (ret)
return ret;
diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
index dcb2b60..3f717cc 100644
--- a/include/linux/acpi_iort.h
+++ b/include/linux/acpi_iort.h
@@ -33,6 +33,7 @@
void acpi_iort_init(void);
bool iort_node_match(u8 type);
u32 iort_msi_map_rid(struct device *dev, u32 req_id);
+int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id);
struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id);
/* IOMMU interface */
const struct iommu_ops *iort_iommu_configure(struct device *dev);
@@ -41,9 +42,16 @@ static inline void acpi_iort_init(void) { }
static inline bool iort_node_match(u8 type) { return false; }
static inline u32 iort_msi_map_rid(struct device *dev, u32 req_id)
{ return req_id; }
+
static inline struct irq_domain *iort_get_device_domain(struct device *dev,
u32 req_id)
{ return NULL; }
+
+static inline int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id)
+{
+ return -ENODEV;
+}
+
/* IOMMU interface */
static inline
const struct iommu_ops *iort_iommu_configure(struct device *dev)
--
1.7.12.4
^ permalink raw reply related
* [PATCH v3 06/14] irqchip: gicv3-its: platform-msi: refactor its_pmsi_init() to prepare for ACPI
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477408169-22217-1-git-send-email-guohanjun@huawei.com>
From: Hanjun Guo <hanjun.guo@linaro.org>
Introduce its_pmsi_init_one() to refactor the code to isolate
ACPI&DT common code to prepare for ACPI later.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Sinan Kaya <okaya@codeaurora.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
drivers/irqchip/irq-gic-v3-its-platform-msi.c | 45 ++++++++++++++++-----------
1 file changed, 27 insertions(+), 18 deletions(-)
diff --git a/drivers/irqchip/irq-gic-v3-its-platform-msi.c b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
index 16587a9..ff72704 100644
--- a/drivers/irqchip/irq-gic-v3-its-platform-msi.c
+++ b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
@@ -84,34 +84,43 @@ static int its_pmsi_prepare(struct irq_domain *domain, struct device *dev,
{},
};
-static int __init its_pmsi_init(void)
+static int __init its_pmsi_init_one(struct fwnode_handle *fwnode,
+ const char *name)
{
- struct device_node *np;
struct irq_domain *parent;
+ parent = irq_find_matching_fwnode(fwnode, DOMAIN_BUS_NEXUS);
+ if (!parent || !msi_get_domain_info(parent)) {
+ pr_err("%s: unable to locate ITS domain\n", name);
+ return -ENXIO;
+ }
+
+ if (!platform_msi_create_irq_domain(fwnode, &its_pmsi_domain_info,
+ parent)) {
+ pr_err("%s: unable to create platform domain\n", name);
+ return -ENXIO;
+ }
+
+ pr_info("Platform MSI: %s domain created\n", name);
+ return 0;
+}
+
+static void __init its_pmsi_of_init(void)
+{
+ struct device_node *np;
+
for (np = of_find_matching_node(NULL, its_device_id); np;
np = of_find_matching_node(np, its_device_id)) {
if (!of_property_read_bool(np, "msi-controller"))
continue;
- parent = irq_find_matching_host(np, DOMAIN_BUS_NEXUS);
- if (!parent || !msi_get_domain_info(parent)) {
- pr_err("%s: unable to locate ITS domain\n",
- np->full_name);
- continue;
- }
-
- if (!platform_msi_create_irq_domain(of_node_to_fwnode(np),
- &its_pmsi_domain_info,
- parent)) {
- pr_err("%s: unable to create platform domain\n",
- np->full_name);
- continue;
- }
-
- pr_info("Platform MSI: %s domain created\n", np->full_name);
+ its_pmsi_init_one(of_node_to_fwnode(np), np->full_name);
}
+}
+static int __init its_pmsi_init(void)
+{
+ its_pmsi_of_init();
return 0;
}
early_initcall(its_pmsi_init);
--
1.7.12.4
^ permalink raw reply related
* [PATCH v3 07/14] irqchip: gicv3-its: platform-msi: scan MADT to create platform msi domain
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477408169-22217-1-git-send-email-guohanjun@huawei.com>
From: Hanjun Guo <hanjun.guo@linaro.org>
With the introduction of its_pmsi_init_one(), we can add some code
on top for ACPI support of platform MSI.
We are scanning the MADT table to get the ITS entry(ies), then use
the information to create the platform msi domain for devices connect
to it, just like the PCI MSI for ITS did.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Sinan Kaya <okaya@codeaurora.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
drivers/irqchip/irq-gic-v3-its-platform-msi.c | 36 +++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/irqchip/irq-gic-v3-its-platform-msi.c b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
index ff72704..0be0437 100644
--- a/drivers/irqchip/irq-gic-v3-its-platform-msi.c
+++ b/drivers/irqchip/irq-gic-v3-its-platform-msi.c
@@ -105,6 +105,41 @@ static int __init its_pmsi_init_one(struct fwnode_handle *fwnode,
return 0;
}
+#ifdef CONFIG_ACPI
+static int __init
+its_pmsi_parse_madt(struct acpi_subtable_header *header,
+ const unsigned long end)
+{
+ struct acpi_madt_generic_translator *its_entry;
+ struct fwnode_handle *domain_handle;
+ const char *node_name;
+ int err = -ENXIO;
+
+ its_entry = (struct acpi_madt_generic_translator *)header;
+ node_name = kasprintf(GFP_KERNEL, "ITS at 0x%lx",
+ (long)its_entry->base_address);
+ domain_handle = iort_find_domain_token(its_entry->translation_id);
+ if (!domain_handle) {
+ pr_err("%s: Unable to locate ITS domain handle\n", node_name);
+ goto out;
+ }
+
+ err = its_pmsi_init_one(domain_handle, node_name);
+
+out:
+ kfree(node_name);
+ return err;
+}
+
+static void __init its_acpi_pmsi_init(void)
+{
+ acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_TRANSLATOR,
+ its_pmsi_parse_madt, 0);
+}
+#else
+static inline void its_acpi_pmsi_init(void) { }
+#endif
+
static void __init its_pmsi_of_init(void)
{
struct device_node *np;
@@ -121,6 +156,7 @@ static void __init its_pmsi_of_init(void)
static int __init its_pmsi_init(void)
{
its_pmsi_of_init();
+ its_acpi_pmsi_init();
return 0;
}
early_initcall(its_pmsi_init);
--
1.7.12.4
^ permalink raw reply related
* [PATCH v3 08/14] ACPI: ARM64: IORT: rework iort_node_get_id()
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477408169-22217-1-git-send-email-guohanjun@huawei.com>
From: Hanjun Guo <hanjun.guo@linaro.org>
iort_node_get_id() has two output, one is the mapped ids,
the other is the referenced parent node which is returned
from the function.
For now we need a API just return its parent node for
single mapping, so just update this function slightly then
reuse it later.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
---
drivers/acpi/arm64/iort.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 7d543aa..2881108 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -347,7 +347,8 @@ struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node,
if (map[index].flags & ACPI_IORT_ID_SINGLE_MAPPING) {
if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT ||
node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
- *id_out = map[index].output_base;
+ if (id_out)
+ *id_out = map[index].output_base;
return parent;
}
}
--
1.7.12.4
^ permalink raw reply related
* [PATCH v3 09/14] ACPI: platform: setup MSI domain for ACPI based platform device
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477408169-22217-1-git-send-email-guohanjun@huawei.com>
From: Hanjun Guo <hanjun.guo@linaro.org>
With the platform msi domain created, we can set up the msi domain
for a platform device when it's probed.
In order to do that, we need to get the domain that the platform
device connecting to, so the iort_get_platform_device_domain() is
introduced to retrieve the domain from iort.
After the domain is retrieved, we need a proper way to set the
domain to paltform device, as some platform devices such as an
irqchip needs the msi irqdomain to be the interrupt parent domain,
we need to get irqdomain before platform device is probed but after
the platform device is allocated, so introduce a callback (pre_add_cb)
in pdevinfo to prepare firmware related information which is needed
for device probe, then set the msi domain in that callback.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
drivers/acpi/acpi_platform.c | 11 +++++++++++
drivers/acpi/arm64/iort.c | 43 +++++++++++++++++++++++++++++++++++++++++
drivers/base/platform.c | 3 +++
include/linux/acpi_iort.h | 3 +++
include/linux/platform_device.h | 3 +++
5 files changed, 63 insertions(+)
diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c
index b200ae1..13d0bf8 100644
--- a/drivers/acpi/acpi_platform.c
+++ b/drivers/acpi/acpi_platform.c
@@ -12,6 +12,7 @@
*/
#include <linux/acpi.h>
+#include <linux/acpi_iort.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/kernel.h>
@@ -48,6 +49,15 @@ static void acpi_platform_fill_resource(struct acpi_device *adev,
}
/**
+ * acpi_platform_pre_add_cb - callback before platform device is added, to
+ * prepare firmware related information which is needed for device probe
+ */
+static void acpi_platform_pre_add_cb(struct device *dev)
+{
+ acpi_configure_pmsi_domain(dev);
+}
+
+/**
* acpi_create_platform_device - Create platform device for ACPI device node
* @adev: ACPI device node to create a platform device for.
*
@@ -106,6 +116,7 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *adev)
pdevinfo.res = resources;
pdevinfo.num_res = count;
pdevinfo.fwnode = acpi_fwnode_handle(adev);
+ pdevinfo.pre_add_cb = acpi_platform_pre_add_cb;
if (acpi_dma_supported(adev))
pdevinfo.dma_mask = DMA_BIT_MASK(32);
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 2881108..fd6eb65 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -527,6 +527,49 @@ struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id)
return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI);
}
+/**
+ * iort_get_platform_device_domain() - Find MSI domain related to a
+ * platform device
+ * @dev: the dev pointer associated with the platform device
+ *
+ * Returns: the MSI domain for this device, NULL otherwise
+ */
+static struct irq_domain *iort_get_platform_device_domain(struct device *dev)
+{
+ struct acpi_iort_node *node, *msi_parent;
+ struct fwnode_handle *iort_fwnode;
+ struct acpi_iort_its_group *its;
+
+ /* find its associated iort node */
+ node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
+ iort_match_node_callback, dev);
+ if (!node)
+ return NULL;
+
+ /* then find its msi parent node */
+ msi_parent = iort_node_get_id(node, NULL, IORT_MSI_TYPE, 0);
+ if (!msi_parent)
+ return NULL;
+
+ /* Move to ITS specific data */
+ its = (struct acpi_iort_its_group *)msi_parent->node_data;
+
+ iort_fwnode = iort_find_domain_token(its->identifiers[0]);
+ if (!iort_fwnode)
+ return NULL;
+
+ return irq_find_matching_fwnode(iort_fwnode, DOMAIN_BUS_PLATFORM_MSI);
+}
+
+void acpi_configure_pmsi_domain(struct device *dev)
+{
+ struct irq_domain *msi_domain;
+
+ msi_domain = iort_get_platform_device_domain(dev);
+ if (msi_domain)
+ dev_set_msi_domain(dev, msi_domain);
+}
+
static int __get_pci_rid(struct pci_dev *pdev, u16 alias, void *data)
{
u32 *rid = data;
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index c4af003..3e68f31 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -537,6 +537,9 @@ struct platform_device *platform_device_register_full(
goto err;
}
+ if (pdevinfo->pre_add_cb)
+ pdevinfo->pre_add_cb(&pdev->dev);
+
ret = platform_device_add(pdev);
if (ret) {
err:
diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
index 3f717cc..21e33b6 100644
--- a/include/linux/acpi_iort.h
+++ b/include/linux/acpi_iort.h
@@ -37,6 +37,7 @@
struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id);
/* IOMMU interface */
const struct iommu_ops *iort_iommu_configure(struct device *dev);
+void acpi_configure_pmsi_domain(struct device *dev);
#else
static inline void acpi_iort_init(void) { }
static inline bool iort_node_match(u8 type) { return false; }
@@ -56,6 +57,8 @@ static inline int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id)
static inline
const struct iommu_ops *iort_iommu_configure(struct device *dev)
{ return NULL; }
+
+static inline void acpi_configure_pmsi_domain(struct device *dev) { }
#endif
#define IORT_ACPI_DECLARE(name, table_id, fn) \
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 98c2a7c..280d366fb 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -74,6 +74,9 @@ struct platform_device_info {
u64 dma_mask;
struct property_entry *properties;
+
+ /* preparation callback before the platform device is added */
+ void (*pre_add_cb)(struct device *);
};
extern struct platform_device *platform_device_register_full(
const struct platform_device_info *pdevinfo);
--
1.7.12.4
^ permalink raw reply related
* [PATCH v3 10/14] msi: platform: make platform_msi_create_device_domain() ACPI aware
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477408169-22217-1-git-send-email-guohanjun@huawei.com>
From: Hanjun Guo <hanjun.guo@linaro.org>
With the platform msi domain created for ITS, irqchip such as
mbi-gen connecting ITS, which needs ctreate its own irqdomain.
Fortunately with the platform msi support upstreamed by Marc,
we just need to add minor code to make it run properly.
platform_msi_create_device_domain() is almost ready for ACPI use
except of_node_to_fwnode() is for dt only, make it ACPI aware then
things will work in both DTS and ACPI.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg KH <gregkh@linuxfoundation.org>
---
drivers/base/platform-msi.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/base/platform-msi.c b/drivers/base/platform-msi.c
index be6a599..035ca3b 100644
--- a/drivers/base/platform-msi.c
+++ b/drivers/base/platform-msi.c
@@ -345,8 +345,7 @@ struct irq_domain *
data->host_data = host_data;
domain = irq_domain_create_hierarchy(dev->msi_domain, 0, nvec,
- of_node_to_fwnode(dev->of_node),
- ops, data);
+ dev->fwnode, ops, data);
if (!domain)
goto free_priv;
--
1.7.12.4
^ permalink raw reply related
* [PATCH v3 11/14] ACPI: irq: introduce interrupt producer
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477408169-22217-1-git-send-email-guohanjun@huawei.com>
From: Hanjun Guo <hanjun.guo@linaro.org>
In ACPI 6.1 spec, section 19.6.62, Interrupt Resource Descriptor Macro,
Interrupt (ResourceUsage, EdgeLevel, ActiveLevel, Shared,
ResourceSourceIndex, ResourceSource, DescriptorName)
{ InterruptList } => Buffer
For the arguement ResourceUsage and DescriptorName, which means:
ResourceUsage describes whether the device consumes the specified
interrupt ( ResourceConsumer ) or produces it for use by a child
device ( ResourceProducer ).
If nothing is specified, then ResourceConsumer is assumed.
DescriptorName evaluates to a name string which refers to the
entire resource descriptor.
So it can be used for devices connecting to a specific interrupt
prodcucer instead of the main interrupt controller in MADT. In the
real world, we have irqchip such as mbi-gen which connecting to
a group of wired interrupts and then issue msi to the ITS, devices
connecting to such interrupt controller fit this scope.
For now the irq for ACPI only pointer to the main interrupt
controller's irqdomain, for devices not connecting to those
irqdomains, which need to present its irq parent, we can use
following ASL code to represent it:
Interrupt(ResourceConsumer,..., "\_SB.IRQP") {12,14,....}
then we can parse the interrupt producer with the full
path name "\_SB.IRQP".
In order to do that, we introduce a pointer interrupt_producer
in struct acpi_device, and fill it when scanning irq resources
for acpi device if it specifies the interrupt producer.
But for now when parsing the resources for acpi devices, we don't
pass the acpi device for acpi_walk_resoures() in drivers/acpi/resource.c,
so introduce a adev in struct res_proc_context to pass it as a context
to scan the interrupt resources, then finally pass to acpi_register_gsi()
to find its interrupt producer to get the virq from diffrent domains.
With steps above ready, rework acpi_register_gsi() to get other
interrupt producer if devices not connecting to main interrupt
controller.
Since we often pass NULL to acpi_register_gsi() and there is no interrupt
producer for devices connect to gicd on ARM or io-apic on X86, so it will
use the default irqdomain for those deivces and no functional changes to
those devices.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
drivers/acpi/gsi.c | 10 ++++--
drivers/acpi/resource.c | 85 ++++++++++++++++++++++++++++++++++---------------
include/acpi/acpi_bus.h | 1 +
3 files changed, 68 insertions(+), 28 deletions(-)
diff --git a/drivers/acpi/gsi.c b/drivers/acpi/gsi.c
index ee9e0f2..29ee547 100644
--- a/drivers/acpi/gsi.c
+++ b/drivers/acpi/gsi.c
@@ -55,13 +55,19 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger,
int polarity)
{
struct irq_fwspec fwspec;
+ struct acpi_device *adev = dev ? to_acpi_device(dev) : NULL;
- if (WARN_ON(!acpi_gsi_domain_id)) {
+ if (adev && &adev->fwnode && adev->interrupt_producer)
+ /* devices in DSDT connecting to spefic interrupt producer */
+ fwspec.fwnode = adev->interrupt_producer;
+ else if (acpi_gsi_domain_id)
+ /* devices connecting to gicd in default */
+ fwspec.fwnode = acpi_gsi_domain_id;
+ else {
pr_warn("GSI: No registered irqchip, giving up\n");
return -EINVAL;
}
- fwspec.fwnode = acpi_gsi_domain_id;
fwspec.param[0] = gsi;
fwspec.param[1] = acpi_dev_get_irq_type(trigger, polarity);
fwspec.param_count = 2;
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 56241eb..f1371cf 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -381,7 +381,7 @@ static void acpi_dev_irqresource_disabled(struct resource *res, u32 gsi)
res->flags = IORESOURCE_IRQ | IORESOURCE_DISABLED | IORESOURCE_UNSET;
}
-static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
+static void acpi_dev_get_irqresource(struct acpi_device *adev, struct resource *res, u32 gsi,
u8 triggering, u8 polarity, u8 shareable,
bool legacy)
{
@@ -415,7 +415,7 @@ static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
}
res->flags = acpi_dev_irq_flags(triggering, polarity, shareable);
- irq = acpi_register_gsi(NULL, gsi, triggering, polarity);
+ irq = acpi_register_gsi(&adev->dev, gsi, triggering, polarity);
if (irq >= 0) {
res->start = irq;
res->end = irq;
@@ -424,27 +424,9 @@ static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
}
}
-/**
- * acpi_dev_resource_interrupt - Extract ACPI interrupt resource information.
- * @ares: Input ACPI resource object.
- * @index: Index into the array of GSIs represented by the resource.
- * @res: Output generic resource object.
- *
- * Check if the given ACPI resource object represents an interrupt resource
- * and @index does not exceed the resource's interrupt count (true is returned
- * in that case regardless of the results of the other checks)). If that's the
- * case, register the GSI corresponding to @index from the array of interrupts
- * represented by the resource and populate the generic resource object pointed
- * to by @res accordingly. If the registration of the GSI is not successful,
- * IORESOURCE_DISABLED will be set it that object's flags.
- *
- * Return:
- * 1) false with res->flags setting to zero: not the expected resource type
- * 2) false with IORESOURCE_DISABLED in res->flags: valid unassigned resource
- * 3) true: valid assigned resource
- */
-bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
- struct resource *res)
+static bool __acpi_dev_resource_interrupt(struct acpi_device *adev,
+ struct acpi_resource *ares, int index,
+ struct resource *res)
{
struct acpi_resource_irq *irq;
struct acpi_resource_extended_irq *ext_irq;
@@ -460,7 +442,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
acpi_dev_irqresource_disabled(res, 0);
return false;
}
- acpi_dev_get_irqresource(res, irq->interrupts[index],
+ acpi_dev_get_irqresource(adev, res, irq->interrupts[index],
irq->triggering, irq->polarity,
irq->sharable, true);
break;
@@ -470,7 +452,31 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
acpi_dev_irqresource_disabled(res, 0);
return false;
}
- acpi_dev_get_irqresource(res, ext_irq->interrupts[index],
+
+ /*
+ * It's a interrupt consumer device and connecting to specfic
+ * interrupt controller. For now, we only support connecting
+ * interrupts to one irq controller for a single device
+ */
+ if (ext_irq->producer_consumer == ACPI_CONSUMER
+ && ext_irq->resource_source.string_length != 0
+ && !adev->interrupt_producer) {
+ acpi_status status;
+ acpi_handle handle;
+ struct acpi_device *device;
+
+ status = acpi_get_handle(NULL, ext_irq->resource_source.string_ptr, &handle);
+ if (ACPI_FAILURE(status))
+ return false;
+
+ device = acpi_bus_get_acpi_device(handle);
+ if (!device)
+ return false;
+
+ adev->interrupt_producer = &device->fwnode;
+ }
+
+ acpi_dev_get_irqresource(adev, res, ext_irq->interrupts[index],
ext_irq->triggering, ext_irq->polarity,
ext_irq->sharable, false);
break;
@@ -481,6 +487,31 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
return true;
}
+
+/**
+ * acpi_dev_resource_interrupt - Extract ACPI interrupt resource information.
+ * @ares: Input ACPI resource object.
+ * @index: Index into the array of GSIs represented by the resource.
+ * @res: Output generic resource object.
+ *
+ * Check if the given ACPI resource object represents an interrupt resource
+ * and @index does not exceed the resource's interrupt count (true is returned
+ * in that case regardless of the results of the other checks)). If that's the
+ * case, register the GSI corresponding to @index from the array of interrupts
+ * represented by the resource and populate the generic resource object pointed
+ * to by @res accordingly. If the registration of the GSI is not successful,
+ * IORESOURCE_DISABLED will be set it that object's flags.
+ *
+ * Return:
+ * 1) false with res->flags setting to zero: not the expected resource type
+ * 2) false with IORESOURCE_DISABLED in res->flags: valid unassigned resource
+ * 3) true: valid assigned resource
+ */
+bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
+ struct resource *res)
+{
+ return __acpi_dev_resource_interrupt(NULL, ares, index, res);
+}
EXPORT_SYMBOL_GPL(acpi_dev_resource_interrupt);
/**
@@ -499,6 +530,7 @@ struct res_proc_context {
void *preproc_data;
int count;
int error;
+ struct acpi_device *adev;
};
static acpi_status acpi_dev_new_resource_entry(struct resource_win *win,
@@ -546,7 +578,7 @@ static acpi_status acpi_dev_process_resource(struct acpi_resource *ares,
|| acpi_dev_resource_ext_address_space(ares, &win))
return acpi_dev_new_resource_entry(&win, c);
- for (i = 0; acpi_dev_resource_interrupt(ares, i, res); i++) {
+ for (i = 0; __acpi_dev_resource_interrupt(c->adev, ares, i, res); i++) {
acpi_status status;
status = acpi_dev_new_resource_entry(&win, c);
@@ -599,6 +631,7 @@ int acpi_dev_get_resources(struct acpi_device *adev, struct list_head *list,
c.preproc_data = preproc_data;
c.count = 0;
c.error = 0;
+ c.adev = adev;
status = acpi_walk_resources(adev->handle, METHOD_NAME__CRS,
acpi_dev_process_resource, &c);
if (ACPI_FAILURE(status)) {
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 4242c31..5410d3b 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -355,6 +355,7 @@ struct acpi_device {
int device_type;
acpi_handle handle; /* no handle for fixed hardware */
struct fwnode_handle fwnode;
+ struct fwnode_handle *interrupt_producer;
struct acpi_device *parent;
struct list_head children;
struct list_head node;
--
1.7.12.4
^ permalink raw reply related
* [PATCH v3 12/14] irqchip: mbigen: drop module owner
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477408169-22217-1-git-send-email-guohanjun@huawei.com>
From: Kefeng Wang <wangkefeng.wang@huawei.com>
Module owner will be set by driver core, so drop it.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ma Jun <majun258@huawei.com>
---
drivers/irqchip/irq-mbigen.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c
index 03b79b0..c01ab41 100644
--- a/drivers/irqchip/irq-mbigen.c
+++ b/drivers/irqchip/irq-mbigen.c
@@ -293,7 +293,6 @@ static int mbigen_device_probe(struct platform_device *pdev)
static struct platform_driver mbigen_platform_driver = {
.driver = {
.name = "Hisilicon MBIGEN-V2",
- .owner = THIS_MODULE,
.of_match_table = mbigen_of_match,
},
.probe = mbigen_device_probe,
--
1.7.12.4
^ permalink raw reply related
* [PATCH v3 13/14] irqchip: mbigen: introduce mbigen_of_create_domain()
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477408169-22217-1-git-send-email-guohanjun@huawei.com>
From: Kefeng Wang <wangkefeng.wang@huawei.com>
Introduce mbigen_of_create_domain() to consolidate OF related
code and prepare for ACPI later.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ma Jun <majun258@huawei.com>
---
drivers/irqchip/irq-mbigen.c | 42 +++++++++++++++++++++++++++---------------
1 file changed, 27 insertions(+), 15 deletions(-)
diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c
index c01ab41..9484ea0 100644
--- a/drivers/irqchip/irq-mbigen.c
+++ b/drivers/irqchip/irq-mbigen.c
@@ -236,27 +236,15 @@ static int mbigen_irq_domain_alloc(struct irq_domain *domain,
.free = irq_domain_free_irqs_common,
};
-static int mbigen_device_probe(struct platform_device *pdev)
+static int mbigen_of_create_domain(struct platform_device *pdev,
+ struct mbigen_device *mgn_chip)
{
- struct mbigen_device *mgn_chip;
+ struct device *parent;
struct platform_device *child;
struct irq_domain *domain;
struct device_node *np;
- struct device *parent;
- struct resource *res;
u32 num_pins;
- mgn_chip = devm_kzalloc(&pdev->dev, sizeof(*mgn_chip), GFP_KERNEL);
- if (!mgn_chip)
- return -ENOMEM;
-
- mgn_chip->pdev = pdev;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- mgn_chip->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(mgn_chip->base))
- return PTR_ERR(mgn_chip->base);
-
for_each_child_of_node(pdev->dev.of_node, np) {
if (!of_property_read_bool(np, "interrupt-controller"))
continue;
@@ -280,6 +268,30 @@ static int mbigen_device_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ return 0;
+}
+
+static int mbigen_device_probe(struct platform_device *pdev)
+{
+ struct mbigen_device *mgn_chip;
+ struct resource *res;
+ int err;
+
+ mgn_chip = devm_kzalloc(&pdev->dev, sizeof(*mgn_chip), GFP_KERNEL);
+ if (!mgn_chip)
+ return -ENOMEM;
+
+ mgn_chip->pdev = pdev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mgn_chip->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(mgn_chip->base))
+ return PTR_ERR(mgn_chip->base);
+
+ err = mbigen_of_create_domain(pdev, mgn_chip);
+ if (err)
+ return err;
+
platform_set_drvdata(pdev, mgn_chip);
return 0;
}
--
1.7.12.4
^ permalink raw reply related
* [PATCH v3 14/14] irqchip: mbigen: Add ACPI support
From: Hanjun Guo @ 2016-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477408169-22217-1-git-send-email-guohanjun@huawei.com>
From: Hanjun Guo <hanjun.guo@linaro.org>
With the preparation of platform msi support and interrupt producer
in DSDT, we can add mbigen ACPI support now.
We are using _PRS methd to indicate number of irq pins instead
of num_pins in DT to avoid _DSD usage in this case.
For mbi-gen,
Device(MBI0) {
Name(_HID, "HISI0152")
Name(_UID, Zero)
Name(_CRS, ResourceTemplate() {
Memory32Fixed(ReadWrite, 0xa0080000, 0x10000)
})
Name (_PRS, ResourceTemplate() {
Interrupt(ResourceProducer,...) {12,14,....}
})
}
For devices,
Device(COM0) {
Name(_HID, "ACPIIDxx")
Name(_UID, Zero)
Name(_CRS, ResourceTemplate() {
Memory32Fixed(ReadWrite, 0xb0030000, 0x10000)
Interrupt(ResourceConsumer,..., "\_SB.MBI0") {12}
})
}
With the helpe of platform msi and interrupt producer, then devices
will get the virq from mbi-gen's irqdomain.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ma Jun <majun258@huawei.com>
---
drivers/irqchip/irq-mbigen.c | 70 ++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 67 insertions(+), 3 deletions(-)
diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c
index 9484ea0..ca6add1 100644
--- a/drivers/irqchip/irq-mbigen.c
+++ b/drivers/irqchip/irq-mbigen.c
@@ -16,6 +16,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/acpi.h>
#include <linux/interrupt.h>
#include <linux/irqchip.h>
#include <linux/module.h>
@@ -180,7 +181,7 @@ static int mbigen_domain_translate(struct irq_domain *d,
unsigned long *hwirq,
unsigned int *type)
{
- if (is_of_node(fwspec->fwnode)) {
+ if (is_of_node(fwspec->fwnode) || is_acpi_device_node(fwspec->fwnode)) {
if (fwspec->param_count != 2)
return -EINVAL;
@@ -271,6 +272,54 @@ static int mbigen_of_create_domain(struct platform_device *pdev,
return 0;
}
+#ifdef CONFIG_ACPI
+static acpi_status mbigen_acpi_process_resource(struct acpi_resource *ares,
+ void *context)
+{
+ struct acpi_resource_extended_irq *ext_irq;
+ u32 *num_irqs = context;
+
+ switch (ares->type) {
+ case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+ ext_irq = &ares->data.extended_irq;
+ *num_irqs += ext_irq->interrupt_count;
+ break;
+ default:
+ break;
+ }
+
+ return AE_OK;
+}
+
+static int mbigen_acpi_create_domain(struct platform_device *pdev,
+ struct mbigen_device *mgn_chip)
+{
+ struct irq_domain *domain;
+ u32 num_msis = 0;
+ acpi_status status;
+
+ status = acpi_walk_resources(ACPI_HANDLE(&pdev->dev), METHOD_NAME__PRS,
+ mbigen_acpi_process_resource, &num_msis);
+ if (ACPI_FAILURE(status) || num_msis == 0)
+ return -EINVAL;
+
+ domain = platform_msi_create_device_domain(&pdev->dev, num_msis,
+ mbigen_write_msg,
+ &mbigen_domain_ops,
+ mgn_chip);
+ if (!domain)
+ return -ENOMEM;
+
+ return 0;
+}
+#else
+static int mbigen_acpi_create_domain(struct platform_device *pdev,
+ struct mbigen_device *mgn_chip)
+{
+ return -ENODEV;
+}
+#endif
+
static int mbigen_device_probe(struct platform_device *pdev)
{
struct mbigen_device *mgn_chip;
@@ -288,9 +337,17 @@ static int mbigen_device_probe(struct platform_device *pdev)
if (IS_ERR(mgn_chip->base))
return PTR_ERR(mgn_chip->base);
- err = mbigen_of_create_domain(pdev, mgn_chip);
- if (err)
+ if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node)
+ err = mbigen_of_create_domain(pdev, mgn_chip);
+ else if (ACPI_COMPANION(&pdev->dev))
+ err = mbigen_acpi_create_domain(pdev, mgn_chip);
+ else
+ err = -EINVAL;
+
+ if (err) {
+ dev_err(&pdev->dev, "Failed to create mbi-gen@%p irqdomain", mgn_chip->base);
return err;
+ }
platform_set_drvdata(pdev, mgn_chip);
return 0;
@@ -302,10 +359,17 @@ static int mbigen_device_probe(struct platform_device *pdev)
};
MODULE_DEVICE_TABLE(of, mbigen_of_match);
+static const struct acpi_device_id mbigen_acpi_match[] = {
+ { "HISI0152", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, mbigen_acpi_match);
+
static struct platform_driver mbigen_platform_driver = {
.driver = {
.name = "Hisilicon MBIGEN-V2",
.of_match_table = mbigen_of_match,
+ .acpi_match_table = ACPI_PTR(mbigen_acpi_match),
},
.probe = mbigen_device_probe,
};
--
1.7.12.4
^ permalink raw reply related
* [PATCH v6 00/16] ACPI IORT ARM SMMU support
From: Hanjun Guo @ 2016-10-25 15:24 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161018160414.1228-1-lorenzo.pieralisi@arm.com>
On 2016/10/19 0:03, Lorenzo Pieralisi wrote:
> This patch series is v6 of a previous posting:
>
> https://lkml.org/lkml/2016/9/9/418
>
> v5 -> v6
> - Rebased against v4.9-rc1
> - Changed FWNODE_IOMMU to FWNODE_ACPI_STATIC
> - Moved platform devices creation into IORT code
> - Updated fwnode handling
> - Added default dma masks initialization
>
> v4 -> v5
> - Added SMMUv1/v2 support
> - Rebased against v4.8-rc5 and dependencies series
> - Consolidated IORT platform devices creation
>
[...]
>
> The ACPI IORT table provides information that allows instantiating
> ARM SMMU devices and carrying out id mappings between components on
> ARM based systems (devices, IOMMUs, interrupt controllers).
>
> http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf
>
> Building on basic IORT support, this patchset enables ARM SMMUs support
> on ACPI systems.
>
> Most of the code is aimed at building the required generic ACPI
> infrastructure to create and enable IOMMU components and to bring
> the IOMMU infrastructure for ACPI on par with DT, which is going to
> make future ARM SMMU components easier to integrate.
>
[...]
>
> This patchset is provided for review/testing purposes here:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git acpi/iort-smmu-v6
>
> Tested on Juno and FVP models for ARM SMMU v1 and v3 probing path.
I rebased my platform MSI, interrupt producer and mbi-gen patch set
on top of yours, and test it on Hisilicon D03 board with SMMv3
enabled, USB and SAS are working properly with configuration
in IORT (yes, I need to add patch from Robin - iommu/arm-smmu: Don't
inadvertently reject multiple SMMUv3s),
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Thanks
Hanjun
^ permalink raw reply
* [PATCH 1/2] iommu/arm-smmu: Don't inadvertently reject multiple SMMUv3s
From: Hanjun Guo @ 2016-10-25 15:25 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <5cf1acbf9c42cc99e5cc0dacb50b7a92c3bd0feb.1476702234.git.robin.murphy@arm.com>
On 2016/10/17 19:06, Robin Murphy wrote:
> We now delay installing our per-bus iommu_ops until we know an SMMU has
> successfully probed, as they don't serve much purpose beforehand, and
> doing so also avoids fights between multiple IOMMU drivers in a single
> kernel. However, the upshot of passing the return value of bus_set_iommu()
> back from our probe function is that if there happens to be more than
> one SMMUv3 device in a system, the second and subsequent probes will
> wind up returning -EBUSY to the driver core and getting torn down again.
>
> There are essentially 3 cases in which bus_set_iommu() returns nonzero:
> 1. The bus already has iommu_ops installed
> 2. One of the add_device callbacks from the initial notifier failed
> 3. Allocating or installing the notifier itself failed
>
> The first two are down to devices other than the SMMU in question, so
> shouldn't abort an otherwise-successful SMMU probe, whilst the third is
> indicative of the kind of catastrophic system failure which isn't going
> to get much further anyway. Consequently, there is little harm in
> ignoring the return value either way.
>
> CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Thanks
Hanjun
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox