* [PATCH v6 3/9] drm/hisilicon/hibmc: Add support for frame buffer
From: Rongrong Zou @ 2016-10-28 7:27 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477639682-22520-1-git-send-email-zourongrong@gmail.com>
Add support for fbdev and kms fb management.
Signed-off-by: Rongrong Zou <zourongrong@gmail.com>
---
drivers/gpu/drm/hisilicon/hibmc/Makefile | 2 +-
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 17 ++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h | 24 ++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c | 255 ++++++++++++++++++++++
drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c | 66 ++++++
5 files changed, 363 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c
diff --git a/drivers/gpu/drm/hisilicon/hibmc/Makefile b/drivers/gpu/drm/hisilicon/hibmc/Makefile
index d5c40b8..810a37e 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/Makefile
+++ b/drivers/gpu/drm/hisilicon/hibmc/Makefile
@@ -1,5 +1,5 @@
ccflags-y := -Iinclude/drm
-hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_power.o hibmc_ttm.o
+hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_fbdev.o hibmc_drm_power.o hibmc_ttm.o
obj-$(CONFIG_DRM_HISI_HIBMC) +=hibmc-drm.o
#obj-y += hibmc-drm.o
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
index 81f4301..5ac7a7e 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
@@ -66,11 +66,23 @@ static void hibmc_disable_vblank(struct drm_device *dev, unsigned int pipe)
static int hibmc_pm_suspend(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *drm_dev = pci_get_drvdata(pdev);
+ struct hibmc_drm_device *hidev = drm_dev->dev_private;
+
+ drm_fb_helper_set_suspend_unlocked(&hidev->fbdev->helper, 1);
+
return 0;
}
static int hibmc_pm_resume(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *drm_dev = pci_get_drvdata(pdev);
+ struct hibmc_drm_device *hidev = drm_dev->dev_private;
+
+ drm_fb_helper_set_suspend_unlocked(&hidev->fbdev->helper, 0);
+
return 0;
}
@@ -170,6 +182,7 @@ static int hibmc_unload(struct drm_device *dev)
{
struct hibmc_drm_device *hidev = dev->dev_private;
+ hibmc_fbdev_fini(hidev);
hibmc_mm_fini(hidev);
hibmc_hw_fini(hidev);
dev->dev_private = NULL;
@@ -195,6 +208,10 @@ static int hibmc_load(struct drm_device *dev, unsigned long flags)
if (ret)
goto err;
+ ret = hibmc_fbdev_init(hidev);
+ if (ret)
+ goto err;
+
return 0;
err:
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
index db8d80e..a40e9a7 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
@@ -20,9 +20,22 @@
#define HIBMC_DRM_DRV_H
#include <drm/drmP.h>
+#include <drm/drm_fb_helper.h>
#include <drm/ttm/ttm_bo_driver.h>
#include <drm/drm_gem.h>
+struct hibmc_framebuffer {
+ struct drm_framebuffer fb;
+ struct drm_gem_object *obj;
+ bool is_fbdev_fb;
+};
+
+struct hibmc_fbdev {
+ struct drm_fb_helper helper;
+ struct hibmc_framebuffer *fb;
+ int size;
+};
+
struct hibmc_drm_device {
/* hw */
void __iomem *mmio;
@@ -41,9 +54,13 @@ struct hibmc_drm_device {
bool initialized;
} ttm;
+ /* fbdev */
+ struct hibmc_fbdev *fbdev;
bool mm_inited;
};
+#define to_hibmc_framebuffer(x) container_of(x, struct hibmc_framebuffer, fb)
+
struct hibmc_bo {
struct ttm_buffer_object bo;
struct ttm_placement placement;
@@ -65,8 +82,15 @@ static inline struct hibmc_bo *gem_to_hibmc_bo(struct drm_gem_object *gem)
#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
+int hibmc_fbdev_init(struct hibmc_drm_device *hidev);
+void hibmc_fbdev_fini(struct hibmc_drm_device *hidev);
+
int hibmc_gem_create(struct drm_device *dev, u32 size, bool iskernel,
struct drm_gem_object **obj);
+struct hibmc_framebuffer *
+hibmc_framebuffer_init(struct drm_device *dev,
+ const struct drm_mode_fb_cmd2 *mode_cmd,
+ struct drm_gem_object *obj);
int hibmc_mm_init(struct hibmc_drm_device *hibmc);
void hibmc_mm_fini(struct hibmc_drm_device *hibmc);
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c
new file mode 100644
index 0000000..630124b
--- /dev/null
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c
@@ -0,0 +1,255 @@
+/* Hisilicon Hibmc SoC drm driver
+ *
+ * Based on the bochs drm driver.
+ *
+ * Copyright (c) 2016 Huawei Limited.
+ *
+ * Author:
+ * Rongrong Zou <zourongrong@huawei.com>
+ * Rongrong Zou <zourongrong@gmail.com>
+ * Jianhua Li <lijianhua@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_helper.h>
+
+#include "hibmc_drm_drv.h"
+
+/* ---------------------------------------------------------------------- */
+
+static int hibmcfb_create_object(
+ struct hibmc_drm_device *hidev,
+ const struct drm_mode_fb_cmd2 *mode_cmd,
+ struct drm_gem_object **gobj_p)
+{
+ struct drm_gem_object *gobj;
+ struct drm_device *dev = hidev->dev;
+ u32 size;
+ int ret = 0;
+
+ size = mode_cmd->pitches[0] * mode_cmd->height;
+ ret = hibmc_gem_create(dev, size, true, &gobj);
+ if (ret)
+ return ret;
+
+ *gobj_p = gobj;
+ return ret;
+}
+
+static struct fb_ops hibmc_drm_fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = drm_fb_helper_check_var,
+ .fb_set_par = drm_fb_helper_set_par,
+ .fb_fillrect = drm_fb_helper_sys_fillrect,
+ .fb_copyarea = drm_fb_helper_sys_copyarea,
+ .fb_imageblit = drm_fb_helper_sys_imageblit,
+ .fb_pan_display = drm_fb_helper_pan_display,
+ .fb_blank = drm_fb_helper_blank,
+ .fb_setcmap = drm_fb_helper_setcmap,
+};
+
+static int hibmc_drm_fb_create(struct drm_fb_helper *helper,
+ struct drm_fb_helper_surface_size *sizes)
+{
+ struct hibmc_fbdev *hi_fbdev =
+ container_of(helper, struct hibmc_fbdev, helper);
+ struct hibmc_drm_device *hidev =
+ (struct hibmc_drm_device *)helper->dev->dev_private;
+ struct fb_info *info;
+ struct hibmc_framebuffer *hibmc_fb;
+ struct drm_framebuffer *fb;
+ struct drm_mode_fb_cmd2 mode_cmd;
+ struct drm_gem_object *gobj = NULL;
+ int ret = 0;
+ size_t size;
+ unsigned int bytes_per_pixel;
+ struct hibmc_bo *bo = NULL;
+
+ DRM_DEBUG_DRIVER("surface width(%d), height(%d) and bpp(%d)\n",
+ sizes->surface_width, sizes->surface_height,
+ sizes->surface_bpp);
+ sizes->surface_depth = 32;
+
+ bytes_per_pixel = DIV_ROUND_UP(sizes->surface_bpp, 8);
+
+ mode_cmd.width = sizes->surface_width;
+ mode_cmd.height = sizes->surface_height;
+ mode_cmd.pitches[0] = mode_cmd.width * bytes_per_pixel;
+ mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
+ sizes->surface_depth);
+
+ size = roundup(mode_cmd.pitches[0] * mode_cmd.height, PAGE_SIZE);
+
+ ret = hibmcfb_create_object(hidev, &mode_cmd, &gobj);
+ if (ret) {
+ DRM_ERROR("failed to create fbcon backing object %d\r\n", ret);
+ return -ENOMEM;
+ }
+
+ bo = gem_to_hibmc_bo(gobj);
+
+ ret = ttm_bo_reserve(&bo->bo, true, false, NULL);
+ if (ret)
+ return ret;
+
+ ret = hibmc_bo_pin(bo, TTM_PL_FLAG_VRAM, NULL);
+ if (ret) {
+ DRM_ERROR("failed to pin fbcon\n");
+ return ret;
+ }
+
+ ret = ttm_bo_kmap(&bo->bo, 0, bo->bo.num_pages, &bo->kmap);
+
+ if (ret) {
+ DRM_ERROR("failed to kmap fbcon\n");
+ ttm_bo_unreserve(&bo->bo);
+ return ret;
+ }
+
+ ttm_bo_unreserve(&bo->bo);
+
+ info = drm_fb_helper_alloc_fbi(helper);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ info->par = hi_fbdev;
+
+ hibmc_fb = hibmc_framebuffer_init(hidev->dev, &mode_cmd, gobj);
+ if (IS_ERR(hibmc_fb)) {
+ drm_fb_helper_release_fbi(helper);
+ return PTR_ERR(hibmc_fb);
+ }
+
+ hi_fbdev->fb = hibmc_fb;
+ hidev->fbdev->size = size;
+ fb = &hibmc_fb->fb;
+ if (!fb) {
+ DRM_INFO("fb is NULL\n");
+ return -EINVAL;
+ }
+
+ hi_fbdev->helper.fb = fb;
+
+ strcpy(info->fix.id, "hibmcdrmfb");
+
+ info->flags = FBINFO_DEFAULT;
+ info->fbops = &hibmc_drm_fb_ops;
+
+ drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth);
+ drm_fb_helper_fill_var(info, &hidev->fbdev->helper, sizes->fb_width,
+ sizes->fb_height);
+
+ info->screen_base = bo->kmap.virtual;
+ info->screen_size = size;
+
+ info->fix.smem_start = bo->bo.mem.bus.offset + bo->bo.mem.bus.base;
+ info->fix.smem_len = size;
+
+ return 0;
+}
+
+static void hibmc_fbdev_destroy(struct hibmc_fbdev *fbdev)
+{
+ struct hibmc_framebuffer *gfb = fbdev->fb;
+ struct drm_fb_helper *fbh = &fbdev->helper;
+
+ DRM_DEBUG_DRIVER("hibmc_fbdev_destroy\n");
+
+ drm_fb_helper_unregister_fbi(fbh);
+ drm_fb_helper_release_fbi(fbh);
+
+ drm_fb_helper_fini(fbh);
+
+ if (gfb)
+ drm_framebuffer_unreference(&gfb->fb);
+
+ kfree(fbdev);
+}
+
+static const struct drm_fb_helper_funcs hibmc_fbdev_helper_funcs = {
+ .fb_probe = hibmc_drm_fb_create,
+};
+
+int hibmc_fbdev_init(struct hibmc_drm_device *hidev)
+{
+ int ret;
+ struct fb_var_screeninfo *var;
+ struct fb_fix_screeninfo *fix;
+ struct hibmc_fbdev *hifbdev;
+
+ hifbdev = kzalloc(sizeof(*hifbdev), GFP_KERNEL);
+ if (!hifbdev)
+ return -ENOMEM;
+
+ hidev->fbdev = hifbdev;
+ drm_fb_helper_prepare(hidev->dev, &hifbdev->helper,
+ &hibmc_fbdev_helper_funcs);
+
+ /* Now just one crtc and one channel */
+ ret = drm_fb_helper_init(hidev->dev,
+ &hifbdev->helper, 1, 1);
+
+ if (ret)
+ return ret;
+
+ ret = drm_fb_helper_single_add_all_connectors(&hifbdev->helper);
+ if (ret)
+ goto fini;
+
+ ret = drm_fb_helper_initial_config(&hifbdev->helper, 16);
+ if (ret)
+ goto fini;
+
+ var = &hifbdev->helper.fbdev->var;
+ fix = &hifbdev->helper.fbdev->fix;
+
+ DRM_DEBUG("Member of info->var is :\n"
+ "xres=%d\n"
+ "yres=%d\n"
+ "xres_virtual=%d\n"
+ "yres_virtual=%d\n"
+ "xoffset=%d\n"
+ "yoffset=%d\n"
+ "bits_per_pixel=%d\n"
+ "...\n", var->xres, var->yres, var->xres_virtual,
+ var->yres_virtual, var->xoffset, var->yoffset,
+ var->bits_per_pixel);
+ DRM_DEBUG("Member of info->fix is :\n"
+ "smem_start=%lx\n"
+ "smem_len=%d\n"
+ "type=%d\n"
+ "type_aux=%d\n"
+ "visual=%d\n"
+ "xpanstep=%d\n"
+ "ypanstep=%d\n"
+ "ywrapstep=%d\n"
+ "line_length=%d\n"
+ "accel=%d\n"
+ "capabilities=%d\n"
+ "...\n", fix->smem_start, fix->smem_len, fix->type,
+ fix->type_aux, fix->visual, fix->xpanstep,
+ fix->ypanstep, fix->ywrapstep, fix->line_length,
+ fix->accel, fix->capabilities);
+
+ return 0;
+
+fini:
+ drm_fb_helper_fini(&hifbdev->helper);
+ return ret;
+}
+
+void hibmc_fbdev_fini(struct hibmc_drm_device *hidev)
+{
+ if (!hidev->fbdev)
+ return;
+
+ hibmc_fbdev_destroy(hidev->fbdev);
+ hidev->fbdev = NULL;
+}
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c
index 0802ebd..9822f62 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c
@@ -488,3 +488,69 @@ int hibmc_dumb_mmap_offset(struct drm_file *file, struct drm_device *dev,
drm_gem_object_unreference_unlocked(obj);
return 0;
}
+
+/* ---------------------------------------------------------------------- */
+
+static void hibmc_user_framebuffer_destroy(struct drm_framebuffer *fb)
+{
+ struct hibmc_framebuffer *hibmc_fb = to_hibmc_framebuffer(fb);
+
+ drm_gem_object_unreference_unlocked(hibmc_fb->obj);
+ drm_framebuffer_cleanup(fb);
+ kfree(hibmc_fb);
+}
+
+static const struct drm_framebuffer_funcs hibmc_fb_funcs = {
+ .destroy = hibmc_user_framebuffer_destroy,
+};
+
+struct hibmc_framebuffer *
+hibmc_framebuffer_init(struct drm_device *dev,
+ const struct drm_mode_fb_cmd2 *mode_cmd,
+ struct drm_gem_object *obj)
+{
+ struct hibmc_framebuffer *hibmc_fb;
+ int ret;
+
+ hibmc_fb = kzalloc(sizeof(*hibmc_fb), GFP_KERNEL);
+ if (!hibmc_fb)
+ return ERR_PTR(-ENOMEM);
+
+ drm_helper_mode_fill_fb_struct(&hibmc_fb->fb, mode_cmd);
+ hibmc_fb->obj = obj;
+ ret = drm_framebuffer_init(dev, &hibmc_fb->fb, &hibmc_fb_funcs);
+ if (ret) {
+ DRM_ERROR("drm_framebuffer_init failed: %d\n", ret);
+ kfree(hibmc_fb);
+ return ERR_PTR(ret);
+ }
+
+ return hibmc_fb;
+}
+
+static struct drm_framebuffer *
+hibmc_user_framebuffer_create(struct drm_device *dev,
+ struct drm_file *filp,
+ const struct drm_mode_fb_cmd2 *mode_cmd)
+{
+ struct drm_gem_object *obj;
+ struct hibmc_framebuffer *hibmc_fb;
+
+ DRM_DEBUG_DRIVER("%dx%d, format %c%c%c%c\n",
+ mode_cmd->width, mode_cmd->height,
+ (mode_cmd->pixel_format) & 0xff,
+ (mode_cmd->pixel_format >> 8) & 0xff,
+ (mode_cmd->pixel_format >> 16) & 0xff,
+ (mode_cmd->pixel_format >> 24) & 0xff);
+
+ obj = drm_gem_object_lookup(filp, mode_cmd->handles[0]);
+ if (!obj)
+ return ERR_PTR(-ENOENT);
+
+ hibmc_fb = hibmc_framebuffer_init(dev, mode_cmd, obj);
+ if (IS_ERR(hibmc_fb)) {
+ drm_gem_object_unreference_unlocked(obj);
+ return ERR_PTR((long)hibmc_fb);
+ }
+ return &hibmc_fb->fb;
+}
--
1.9.1
^ permalink raw reply related
* [PATCH v6 2/9] drm/hisilicon/hibmc: Add video memory management
From: Rongrong Zou @ 2016-10-28 7:27 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477639682-22520-1-git-send-email-zourongrong@gmail.com>
Hibmc have 32m video memory which can be accessed through PCIe by host,
we use ttm to manage these memory.
Signed-off-by: Rongrong Zou <zourongrong@gmail.com>
---
drivers/gpu/drm/hisilicon/hibmc/Kconfig | 1 +
drivers/gpu/drm/hisilicon/hibmc/Makefile | 2 +-
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 12 +
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h | 46 +++
drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c | 490 ++++++++++++++++++++++++
5 files changed, 550 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c
diff --git a/drivers/gpu/drm/hisilicon/hibmc/Kconfig b/drivers/gpu/drm/hisilicon/hibmc/Kconfig
index a9af90d..bcb8c18 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/Kconfig
+++ b/drivers/gpu/drm/hisilicon/hibmc/Kconfig
@@ -1,6 +1,7 @@
config DRM_HISI_HIBMC
tristate "DRM Support for Hisilicon Hibmc"
depends on DRM && PCI
+ select DRM_TTM
help
Choose this option if you have a Hisilicon Hibmc soc chipset.
diff --git a/drivers/gpu/drm/hisilicon/hibmc/Makefile b/drivers/gpu/drm/hisilicon/hibmc/Makefile
index 97cf4a0..d5c40b8 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/Makefile
+++ b/drivers/gpu/drm/hisilicon/hibmc/Makefile
@@ -1,5 +1,5 @@
ccflags-y := -Iinclude/drm
-hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_power.o
+hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_power.o hibmc_ttm.o
obj-$(CONFIG_DRM_HISI_HIBMC) +=hibmc-drm.o
#obj-y += hibmc-drm.o
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
index 4669d42..81f4301 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
@@ -31,6 +31,7 @@
#ifdef CONFIG_COMPAT
.compat_ioctl = drm_compat_ioctl,
#endif
+ .mmap = hibmc_mmap,
.poll = drm_poll,
.read = drm_read,
.llseek = no_llseek,
@@ -46,6 +47,8 @@ static void hibmc_disable_vblank(struct drm_device *dev, unsigned int pipe)
}
static struct drm_driver hibmc_driver = {
+ .driver_features = DRIVER_GEM,
+
.fops = &hibmc_fops,
.name = "hibmc",
.date = "20160828",
@@ -55,6 +58,10 @@ static void hibmc_disable_vblank(struct drm_device *dev, unsigned int pipe)
.get_vblank_counter = drm_vblank_no_hw_counter,
.enable_vblank = hibmc_enable_vblank,
.disable_vblank = hibmc_disable_vblank,
+ .gem_free_object_unlocked = hibmc_gem_free_object,
+ .dumb_create = hibmc_dumb_create,
+ .dumb_map_offset = hibmc_dumb_mmap_offset,
+ .dumb_destroy = drm_gem_dumb_destroy,
};
static int hibmc_pm_suspend(struct device *dev)
@@ -163,6 +170,7 @@ static int hibmc_unload(struct drm_device *dev)
{
struct hibmc_drm_device *hidev = dev->dev_private;
+ hibmc_mm_fini(hidev);
hibmc_hw_fini(hidev);
dev->dev_private = NULL;
return 0;
@@ -183,6 +191,10 @@ static int hibmc_load(struct drm_device *dev, unsigned long flags)
if (ret)
goto err;
+ ret = hibmc_mm_init(hidev);
+ if (ret)
+ goto err;
+
return 0;
err:
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
index 0037341..db8d80e 100644
--- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
@@ -20,6 +20,8 @@
#define HIBMC_DRM_DRV_H
#include <drm/drmP.h>
+#include <drm/ttm/ttm_bo_driver.h>
+#include <drm/drm_gem.h>
struct hibmc_drm_device {
/* hw */
@@ -30,6 +32,50 @@ struct hibmc_drm_device {
/* drm */
struct drm_device *dev;
+
+ /* ttm */
+ struct {
+ struct drm_global_reference mem_global_ref;
+ struct ttm_bo_global_ref bo_global_ref;
+ struct ttm_bo_device bdev;
+ bool initialized;
+ } ttm;
+
+ bool mm_inited;
};
+struct hibmc_bo {
+ struct ttm_buffer_object bo;
+ struct ttm_placement placement;
+ struct ttm_bo_kmap_obj kmap;
+ struct drm_gem_object gem;
+ struct ttm_place placements[3];
+ int pin_count;
+};
+
+static inline struct hibmc_bo *hibmc_bo(struct ttm_buffer_object *bo)
+{
+ return container_of(bo, struct hibmc_bo, bo);
+}
+
+static inline struct hibmc_bo *gem_to_hibmc_bo(struct drm_gem_object *gem)
+{
+ return container_of(gem, struct hibmc_bo, gem);
+}
+
+#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
+
+int hibmc_gem_create(struct drm_device *dev, u32 size, bool iskernel,
+ struct drm_gem_object **obj);
+
+int hibmc_mm_init(struct hibmc_drm_device *hibmc);
+void hibmc_mm_fini(struct hibmc_drm_device *hibmc);
+int hibmc_bo_pin(struct hibmc_bo *bo, u32 pl_flag, u64 *gpu_addr);
+void hibmc_gem_free_object(struct drm_gem_object *obj);
+int hibmc_dumb_create(struct drm_file *file, struct drm_device *dev,
+ struct drm_mode_create_dumb *args);
+int hibmc_dumb_mmap_offset(struct drm_file *file, struct drm_device *dev,
+ u32 handle, u64 *offset);
+int hibmc_mmap(struct file *filp, struct vm_area_struct *vma);
+
#endif
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c
new file mode 100644
index 0000000..0802ebd
--- /dev/null
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c
@@ -0,0 +1,490 @@
+/* Hisilicon Hibmc SoC drm driver
+ *
+ * Based on the bochs drm driver.
+ *
+ * Copyright (c) 2016 Huawei Limited.
+ *
+ * Author:
+ * Rongrong Zou <zourongrong@huawei.com>
+ * Rongrong Zou <zourongrong@gmail.com>
+ * Jianhua Li <lijianhua@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include "hibmc_drm_drv.h"
+#include <ttm/ttm_page_alloc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_atomic_helper.h>
+
+static inline struct hibmc_drm_device *
+hibmc_bdev(struct ttm_bo_device *bd)
+{
+ return container_of(bd, struct hibmc_drm_device, ttm.bdev);
+}
+
+static int
+hibmc_ttm_mem_global_init(struct drm_global_reference *ref)
+{
+ return ttm_mem_global_init(ref->object);
+}
+
+static void
+hibmc_ttm_mem_global_release(struct drm_global_reference *ref)
+{
+ ttm_mem_global_release(ref->object);
+}
+
+static int hibmc_ttm_global_init(struct hibmc_drm_device *hibmc)
+{
+ struct drm_global_reference *global_ref;
+ int r;
+
+ global_ref = &hibmc->ttm.mem_global_ref;
+ global_ref->global_type = DRM_GLOBAL_TTM_MEM;
+ global_ref->size = sizeof(struct ttm_mem_global);
+ global_ref->init = &hibmc_ttm_mem_global_init;
+ global_ref->release = &hibmc_ttm_mem_global_release;
+ r = drm_global_item_ref(global_ref);
+ if (r != 0) {
+ DRM_ERROR("Failed setting up TTM memory accounting subsystem.\n"
+ );
+ return r;
+ }
+
+ hibmc->ttm.bo_global_ref.mem_glob =
+ hibmc->ttm.mem_global_ref.object;
+ global_ref = &hibmc->ttm.bo_global_ref.ref;
+ global_ref->global_type = DRM_GLOBAL_TTM_BO;
+ global_ref->size = sizeof(struct ttm_bo_global);
+ global_ref->init = &ttm_bo_global_init;
+ global_ref->release = &ttm_bo_global_release;
+ r = drm_global_item_ref(global_ref);
+ if (r != 0) {
+ DRM_ERROR("Failed setting up TTM BO subsystem.\n");
+ drm_global_item_unref(&hibmc->ttm.mem_global_ref);
+ return r;
+ }
+ return 0;
+}
+
+static void
+hibmc_ttm_global_release(struct hibmc_drm_device *hibmc)
+{
+ if (!hibmc->ttm.mem_global_ref.release)
+ return;
+
+ drm_global_item_unref(&hibmc->ttm.bo_global_ref.ref);
+ drm_global_item_unref(&hibmc->ttm.mem_global_ref);
+ hibmc->ttm.mem_global_ref.release = NULL;
+}
+
+static void hibmc_bo_ttm_destroy(struct ttm_buffer_object *tbo)
+{
+ struct hibmc_bo *bo;
+
+ bo = container_of(tbo, struct hibmc_bo, bo);
+
+ drm_gem_object_release(&bo->gem);
+ kfree(bo);
+}
+
+static bool hibmc_ttm_bo_is_hibmc_bo(struct ttm_buffer_object *bo)
+{
+ if (bo->destroy == &hibmc_bo_ttm_destroy)
+ return true;
+ return false;
+}
+
+static int
+hibmc_bo_init_mem_type(struct ttm_bo_device *bdev, u32 type,
+ struct ttm_mem_type_manager *man)
+{
+ switch (type) {
+ case TTM_PL_SYSTEM:
+ man->flags = TTM_MEMTYPE_FLAG_MAPPABLE;
+ man->available_caching = TTM_PL_MASK_CACHING;
+ man->default_caching = TTM_PL_FLAG_CACHED;
+ break;
+ case TTM_PL_VRAM:
+ man->func = &ttm_bo_manager_func;
+ man->flags = TTM_MEMTYPE_FLAG_FIXED |
+ TTM_MEMTYPE_FLAG_MAPPABLE;
+ man->available_caching = TTM_PL_FLAG_UNCACHED |
+ TTM_PL_FLAG_WC;
+ man->default_caching = TTM_PL_FLAG_WC;
+ break;
+ default:
+ DRM_ERROR("Unsupported memory type %u\n", type);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+void hibmc_ttm_placement(struct hibmc_bo *bo, int domain)
+{
+ u32 c = 0;
+ u32 i;
+
+ bo->placement.placement = bo->placements;
+ bo->placement.busy_placement = bo->placements;
+ if (domain & TTM_PL_FLAG_VRAM)
+ bo->placements[c++].flags = TTM_PL_FLAG_WC |
+ TTM_PL_FLAG_UNCACHED | TTM_PL_FLAG_VRAM;
+ if (domain & TTM_PL_FLAG_SYSTEM)
+ bo->placements[c++].flags = TTM_PL_MASK_CACHING |
+ TTM_PL_FLAG_SYSTEM;
+ if (!c)
+ bo->placements[c++].flags = TTM_PL_MASK_CACHING |
+ TTM_PL_FLAG_SYSTEM;
+
+ bo->placement.num_placement = c;
+ bo->placement.num_busy_placement = c;
+ for (i = 0; i < c; ++i) {
+ bo->placements[i].fpfn = 0;
+ bo->placements[i].lpfn = 0;
+ }
+}
+
+static void
+hibmc_bo_evict_flags(struct ttm_buffer_object *bo, struct ttm_placement *pl)
+{
+ struct hibmc_bo *hibmcbo = hibmc_bo(bo);
+
+ if (!hibmc_ttm_bo_is_hibmc_bo(bo))
+ return;
+
+ hibmc_ttm_placement(hibmcbo, TTM_PL_FLAG_SYSTEM);
+ *pl = hibmcbo->placement;
+}
+
+static int hibmc_bo_verify_access(struct ttm_buffer_object *bo,
+ struct file *filp)
+{
+ struct hibmc_bo *hibmcbo = hibmc_bo(bo);
+
+ return drm_vma_node_verify_access(&hibmcbo->gem.vma_node,
+ filp->private_data);
+}
+
+static int hibmc_ttm_io_mem_reserve(struct ttm_bo_device *bdev,
+ struct ttm_mem_reg *mem)
+{
+ struct ttm_mem_type_manager *man = &bdev->man[mem->mem_type];
+ struct hibmc_drm_device *hibmc = hibmc_bdev(bdev);
+
+ mem->bus.addr = NULL;
+ mem->bus.offset = 0;
+ mem->bus.size = mem->num_pages << PAGE_SHIFT;
+ mem->bus.base = 0;
+ mem->bus.is_iomem = false;
+ if (!(man->flags & TTM_MEMTYPE_FLAG_MAPPABLE))
+ return -EINVAL;
+ switch (mem->mem_type) {
+ case TTM_PL_SYSTEM:
+ /* system memory */
+ return 0;
+ case TTM_PL_VRAM:
+ mem->bus.offset = mem->start << PAGE_SHIFT;
+ mem->bus.base = pci_resource_start(hibmc->dev->pdev, 0);
+ mem->bus.is_iomem = true;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void hibmc_ttm_io_mem_free(struct ttm_bo_device *bdev,
+ struct ttm_mem_reg *mem)
+{
+}
+
+static void hibmc_ttm_backend_destroy(struct ttm_tt *tt)
+{
+ ttm_tt_fini(tt);
+ kfree(tt);
+}
+
+static struct ttm_backend_func hibmc_tt_backend_func = {
+ .destroy = &hibmc_ttm_backend_destroy,
+};
+
+static struct ttm_tt *hibmc_ttm_tt_create(struct ttm_bo_device *bdev,
+ unsigned long size,
+ u32 page_flags,
+ struct page *dummy_read_page)
+{
+ struct ttm_tt *tt;
+
+ tt = kzalloc(sizeof(*tt), GFP_KERNEL);
+ if (!tt)
+ return NULL;
+ tt->func = &hibmc_tt_backend_func;
+ if (ttm_tt_init(tt, bdev, size, page_flags, dummy_read_page)) {
+ kfree(tt);
+ return NULL;
+ }
+ return tt;
+}
+
+static int hibmc_ttm_tt_populate(struct ttm_tt *ttm)
+{
+ return ttm_pool_populate(ttm);
+}
+
+static void hibmc_ttm_tt_unpopulate(struct ttm_tt *ttm)
+{
+ ttm_pool_unpopulate(ttm);
+}
+
+struct ttm_bo_driver hibmc_bo_driver = {
+ .ttm_tt_create = hibmc_ttm_tt_create,
+ .ttm_tt_populate = hibmc_ttm_tt_populate,
+ .ttm_tt_unpopulate = hibmc_ttm_tt_unpopulate,
+ .init_mem_type = hibmc_bo_init_mem_type,
+ .evict_flags = hibmc_bo_evict_flags,
+ .move = NULL,
+ .verify_access = hibmc_bo_verify_access,
+ .io_mem_reserve = &hibmc_ttm_io_mem_reserve,
+ .io_mem_free = &hibmc_ttm_io_mem_free,
+ .lru_tail = &ttm_bo_default_lru_tail,
+ .swap_lru_tail = &ttm_bo_default_swap_lru_tail,
+};
+
+int hibmc_mm_init(struct hibmc_drm_device *hibmc)
+{
+ int ret;
+ struct drm_device *dev = hibmc->dev;
+ struct ttm_bo_device *bdev = &hibmc->ttm.bdev;
+
+ ret = hibmc_ttm_global_init(hibmc);
+ if (ret)
+ return ret;
+
+ ret = ttm_bo_device_init(&hibmc->ttm.bdev,
+ hibmc->ttm.bo_global_ref.ref.object,
+ &hibmc_bo_driver,
+ dev->anon_inode->i_mapping,
+ DRM_FILE_PAGE_OFFSET,
+ true);
+ if (ret) {
+ DRM_ERROR("Error initialising bo driver; %d\n", ret);
+ return ret;
+ }
+
+ ret = ttm_bo_init_mm(bdev, TTM_PL_VRAM,
+ hibmc->fb_size >> PAGE_SHIFT);
+ if (ret) {
+ DRM_ERROR("Failed ttm VRAM init: %d\n", ret);
+ return ret;
+ }
+
+ hibmc->mm_inited = true;
+ return 0;
+}
+
+void hibmc_mm_fini(struct hibmc_drm_device *hibmc)
+{
+ if (!hibmc->mm_inited)
+ return;
+
+ ttm_bo_device_release(&hibmc->ttm.bdev);
+ hibmc_ttm_global_release(hibmc);
+ hibmc->mm_inited = false;
+}
+
+int hibmc_bo_create(struct drm_device *dev, int size, int align,
+ u32 flags, struct hibmc_bo **phibmcbo)
+{
+ struct hibmc_drm_device *hibmc = dev->dev_private;
+ struct hibmc_bo *hibmcbo;
+ size_t acc_size;
+ int ret;
+
+ hibmcbo = kzalloc(sizeof(*hibmcbo), GFP_KERNEL);
+ if (!hibmcbo)
+ return -ENOMEM;
+
+ ret = drm_gem_object_init(dev, &hibmcbo->gem, size);
+ if (ret) {
+ kfree(hibmcbo);
+ return ret;
+ }
+
+ hibmcbo->bo.bdev = &hibmc->ttm.bdev;
+
+ hibmc_ttm_placement(hibmcbo, TTM_PL_FLAG_VRAM | TTM_PL_FLAG_SYSTEM);
+
+ acc_size = ttm_bo_dma_acc_size(&hibmc->ttm.bdev, size,
+ sizeof(struct hibmc_bo));
+
+ ret = ttm_bo_init(&hibmc->ttm.bdev, &hibmcbo->bo, size,
+ ttm_bo_type_device, &hibmcbo->placement,
+ align >> PAGE_SHIFT, false, NULL, acc_size,
+ NULL, NULL, hibmc_bo_ttm_destroy);
+ if (ret)
+ return ret;
+
+ *phibmcbo = hibmcbo;
+ return 0;
+}
+
+static inline u64 hibmc_bo_gpu_offset(struct hibmc_bo *bo)
+{
+ return bo->bo.offset;
+}
+
+int hibmc_bo_pin(struct hibmc_bo *bo, u32 pl_flag, u64 *gpu_addr)
+{
+ int i, ret;
+
+ if (bo->pin_count) {
+ bo->pin_count++;
+ if (gpu_addr)
+ *gpu_addr = hibmc_bo_gpu_offset(bo);
+ }
+
+ hibmc_ttm_placement(bo, pl_flag);
+ for (i = 0; i < bo->placement.num_placement; i++)
+ bo->placements[i].flags |= TTM_PL_FLAG_NO_EVICT;
+ ret = ttm_bo_validate(&bo->bo, &bo->placement, false, false);
+ if (ret)
+ return ret;
+
+ bo->pin_count = 1;
+ if (gpu_addr)
+ *gpu_addr = hibmc_bo_gpu_offset(bo);
+ return 0;
+}
+
+int hibmc_bo_push_sysram(struct hibmc_bo *bo)
+{
+ int i, ret;
+
+ if (!bo->pin_count) {
+ DRM_ERROR("unpin bad %p\n", bo);
+ return 0;
+ }
+ bo->pin_count--;
+ if (bo->pin_count)
+ return 0;
+
+ if (bo->kmap.virtual)
+ ttm_bo_kunmap(&bo->kmap);
+
+ hibmc_ttm_placement(bo, TTM_PL_FLAG_SYSTEM);
+ for (i = 0; i < bo->placement.num_placement ; i++)
+ bo->placements[i].flags |= TTM_PL_FLAG_NO_EVICT;
+
+ ret = ttm_bo_validate(&bo->bo, &bo->placement, false, false);
+ if (ret) {
+ DRM_ERROR("pushing to VRAM failed\n");
+ return ret;
+ }
+ return 0;
+}
+
+int hibmc_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+ struct drm_file *file_priv;
+ struct hibmc_drm_device *hibmc;
+
+ if (unlikely(vma->vm_pgoff < DRM_FILE_PAGE_OFFSET))
+ return -EINVAL;
+
+ file_priv = filp->private_data;
+ hibmc = file_priv->minor->dev->dev_private;
+ return ttm_bo_mmap(filp, vma, &hibmc->ttm.bdev);
+}
+
+int hibmc_gem_create(struct drm_device *dev, u32 size, bool iskernel,
+ struct drm_gem_object **obj)
+{
+ struct hibmc_bo *hibmcbo;
+ int ret;
+
+ *obj = NULL;
+
+ size = PAGE_ALIGN(size);
+ if (size == 0)
+ return -EINVAL;
+
+ ret = hibmc_bo_create(dev, size, 0, 0, &hibmcbo);
+ if (ret) {
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("failed to allocate GEM object\n");
+ return ret;
+ }
+ *obj = &hibmcbo->gem;
+ return 0;
+}
+
+int hibmc_dumb_create(struct drm_file *file, struct drm_device *dev,
+ struct drm_mode_create_dumb *args)
+{
+ struct drm_gem_object *gobj;
+ u32 handle;
+ int ret;
+
+ args->pitch = ALIGN(args->width * ((args->bpp + 7) / 8), 16);
+ args->size = args->pitch * args->height;
+
+ ret = hibmc_gem_create(dev, args->size, false,
+ &gobj);
+ if (ret)
+ return ret;
+
+ ret = drm_gem_handle_create(file, gobj, &handle);
+ drm_gem_object_unreference_unlocked(gobj);
+ if (ret)
+ return ret;
+
+ args->handle = handle;
+ return 0;
+}
+
+static void hibmc_bo_unref(struct hibmc_bo **bo)
+{
+ struct ttm_buffer_object *tbo;
+
+ if ((*bo) == NULL)
+ return;
+
+ tbo = &((*bo)->bo);
+ ttm_bo_unref(&tbo);
+ *bo = NULL;
+}
+
+void hibmc_gem_free_object(struct drm_gem_object *obj)
+{
+ struct hibmc_bo *hibmcbo = gem_to_hibmc_bo(obj);
+
+ hibmc_bo_unref(&hibmcbo);
+}
+
+static u64 hibmc_bo_mmap_offset(struct hibmc_bo *bo)
+{
+ return drm_vma_node_offset_addr(&bo->bo.vma_node);
+}
+
+int hibmc_dumb_mmap_offset(struct drm_file *file, struct drm_device *dev,
+ u32 handle, u64 *offset)
+{
+ struct drm_gem_object *obj;
+ struct hibmc_bo *bo;
+
+ obj = drm_gem_object_lookup(file, handle);
+ if (!obj)
+ return -ENOENT;
+
+ bo = gem_to_hibmc_bo(obj);
+ *offset = hibmc_bo_mmap_offset(bo);
+
+ drm_gem_object_unreference_unlocked(obj);
+ return 0;
+}
--
1.9.1
^ permalink raw reply related
* [PATCH v6 1/9] drm/hisilicon/hibmc: Add hisilicon hibmc drm master driver
From: Rongrong Zou @ 2016-10-28 7:27 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477639682-22520-1-git-send-email-zourongrong@gmail.com>
Add DRM master driver for Hisilicon Hibmc SoC which used for
Out-of-band management. Blow is the general hardware connection,
both the Hibmc and the host CPU are on the same mother board.
+----------+ +----------+
| | PCIe | Hibmc |
|host CPU( |<----->| display |
|arm64,x86)| |subsystem |
+----------+ +----------+
Signed-off-by: Rongrong Zou <zourongrong@gmail.com>
---
drivers/gpu/drm/hisilicon/Kconfig | 1 +
drivers/gpu/drm/hisilicon/Makefile | 1 +
drivers/gpu/drm/hisilicon/hibmc/Kconfig | 7 +
drivers/gpu/drm/hisilicon/hibmc/Makefile | 5 +
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 269 ++++++++++++++++++++++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h | 35 +++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.c | 85 +++++++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.h | 28 +++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_regs.h | 212 +++++++++++++++++
9 files changed, 643 insertions(+)
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/Kconfig
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/Makefile
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.c
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.h
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_regs.h
diff --git a/drivers/gpu/drm/hisilicon/Kconfig b/drivers/gpu/drm/hisilicon/Kconfig
index 558c61b..2fd2724 100644
--- a/drivers/gpu/drm/hisilicon/Kconfig
+++ b/drivers/gpu/drm/hisilicon/Kconfig
@@ -2,4 +2,5 @@
# hisilicon drm device configuration.
# Please keep this list sorted alphabetically
+source "drivers/gpu/drm/hisilicon/hibmc/Kconfig"
source "drivers/gpu/drm/hisilicon/kirin/Kconfig"
diff --git a/drivers/gpu/drm/hisilicon/Makefile b/drivers/gpu/drm/hisilicon/Makefile
index e3f6d49..c8155bf 100644
--- a/drivers/gpu/drm/hisilicon/Makefile
+++ b/drivers/gpu/drm/hisilicon/Makefile
@@ -2,4 +2,5 @@
# Makefile for hisilicon drm drivers.
# Please keep this list sorted alphabetically
+obj-$(CONFIG_DRM_HISI_HIBMC) += hibmc/
obj-$(CONFIG_DRM_HISI_KIRIN) += kirin/
diff --git a/drivers/gpu/drm/hisilicon/hibmc/Kconfig b/drivers/gpu/drm/hisilicon/hibmc/Kconfig
new file mode 100644
index 0000000..a9af90d
--- /dev/null
+++ b/drivers/gpu/drm/hisilicon/hibmc/Kconfig
@@ -0,0 +1,7 @@
+config DRM_HISI_HIBMC
+ tristate "DRM Support for Hisilicon Hibmc"
+ depends on DRM && PCI
+
+ help
+ Choose this option if you have a Hisilicon Hibmc soc chipset.
+ If M is selected the module will be called hibmc-drm.
diff --git a/drivers/gpu/drm/hisilicon/hibmc/Makefile b/drivers/gpu/drm/hisilicon/hibmc/Makefile
new file mode 100644
index 0000000..97cf4a0
--- /dev/null
+++ b/drivers/gpu/drm/hisilicon/hibmc/Makefile
@@ -0,0 +1,5 @@
+ccflags-y := -Iinclude/drm
+hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_power.o
+
+obj-$(CONFIG_DRM_HISI_HIBMC) +=hibmc-drm.o
+#obj-y += hibmc-drm.o
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
new file mode 100644
index 0000000..4669d42
--- /dev/null
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
@@ -0,0 +1,269 @@
+/* Hisilicon Hibmc SoC drm driver
+ *
+ * Based on the bochs drm driver.
+ *
+ * Copyright (c) 2016 Huawei Limited.
+ *
+ * Author:
+ * Rongrong Zou <zourongrong@huawei.com>
+ * Rongrong Zou <zourongrong@gmail.com>
+ * Jianhua Li <lijianhua@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/console.h>
+
+#include "hibmc_drm_drv.h"
+#include "hibmc_drm_regs.h"
+#include "hibmc_drm_power.h"
+
+static const struct file_operations hibmc_fops = {
+ .owner = THIS_MODULE,
+ .open = drm_open,
+ .release = drm_release,
+ .unlocked_ioctl = drm_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
+ .poll = drm_poll,
+ .read = drm_read,
+ .llseek = no_llseek,
+};
+
+static int hibmc_enable_vblank(struct drm_device *dev, unsigned int pipe)
+{
+ return 0;
+}
+
+static void hibmc_disable_vblank(struct drm_device *dev, unsigned int pipe)
+{
+}
+
+static struct drm_driver hibmc_driver = {
+ .fops = &hibmc_fops,
+ .name = "hibmc",
+ .date = "20160828",
+ .desc = "hibmc drm driver",
+ .major = 1,
+ .minor = 0,
+ .get_vblank_counter = drm_vblank_no_hw_counter,
+ .enable_vblank = hibmc_enable_vblank,
+ .disable_vblank = hibmc_disable_vblank,
+};
+
+static int hibmc_pm_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static int hibmc_pm_resume(struct device *dev)
+{
+ return 0;
+}
+
+static const struct dev_pm_ops hibmc_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(hibmc_pm_suspend,
+ hibmc_pm_resume)
+};
+
+static int hibmc_hw_config(struct hibmc_drm_device *hidev)
+{
+ unsigned int reg;
+
+ /* On hardware reset, power mode 0 is default. */
+ hibmc_set_power_mode(hidev, HIBMC_PW_MODE_CTL_MODE_MODE0);
+
+ /* Enable display power gate & LOCALMEM power gate*/
+ reg = readl(hidev->mmio + HIBMC_CURRENT_GATE);
+ reg &= ~HIBMC_CURR_GATE_DISPLAY_MASK;
+ reg &= ~HIBMC_CURR_GATE_LOCALMEM_MASK;
+ reg |= HIBMC_CURR_GATE_DISPLAY(ON);
+ reg |= HIBMC_CURR_GATE_LOCALMEM(ON);
+
+ hibmc_set_current_gate(hidev, reg);
+
+ /* Reset the memory controller. If the memory controller
+ * is not reset in chip,the system might hang when sw accesses
+ * the memory.The memory should be resetted after
+ * changing the MXCLK.
+ */
+ reg = readl(hidev->mmio + HIBMC_MISC_CTRL);
+ reg &= ~HIBMC_MSCCTL_LOCALMEM_RESET_MASK;
+ reg |= HIBMC_MSCCTL_LOCALMEM_RESET(RESET);
+ writel(reg, hidev->mmio + HIBMC_MISC_CTRL);
+
+ reg &= ~HIBMC_MSCCTL_LOCALMEM_RESET_MASK;
+ reg |= HIBMC_MSCCTL_LOCALMEM_RESET(NORMAL);
+
+ writel(reg, hidev->mmio + HIBMC_MISC_CTRL);
+
+ /* We can add more initialization as needed. */
+
+ return 0;
+}
+
+static int hibmc_hw_map(struct hibmc_drm_device *hidev)
+{
+ struct drm_device *dev = hidev->dev;
+ struct pci_dev *pdev = dev->pdev;
+ resource_size_t addr, size, ioaddr, iosize;
+
+ ioaddr = pci_resource_start(pdev, 1);
+ iosize = MB(2);
+
+ hidev->mmio = ioremap_nocache(ioaddr, iosize);
+
+ if (!hidev->mmio) {
+ DRM_ERROR("Cannot map mmio region\n");
+ return -ENOMEM;
+ }
+
+ addr = pci_resource_start(pdev, 0);
+ size = MB(32);
+
+ hidev->fb_map = ioremap(addr, size);
+ if (!hidev->fb_map) {
+ DRM_ERROR("Cannot map framebuffer\n");
+ return -ENOMEM;
+ }
+ hidev->fb_base = addr;
+ hidev->fb_size = size;
+
+ return 0;
+}
+
+static void hibmc_hw_fini(struct hibmc_drm_device *hidev)
+{
+ if (hidev->mmio)
+ iounmap(hidev->mmio);
+ if (hidev->fb_map)
+ iounmap(hidev->fb_map);
+}
+
+static int hibmc_hw_init(struct hibmc_drm_device *hidev)
+{
+ int ret;
+
+ ret = hibmc_hw_map(hidev);
+ if (ret)
+ return ret;
+
+ hibmc_hw_config(hidev);
+
+ return 0;
+}
+
+static int hibmc_unload(struct drm_device *dev)
+{
+ struct hibmc_drm_device *hidev = dev->dev_private;
+
+ hibmc_hw_fini(hidev);
+ dev->dev_private = NULL;
+ return 0;
+}
+
+static int hibmc_load(struct drm_device *dev, unsigned long flags)
+{
+ struct hibmc_drm_device *hidev;
+ int ret;
+
+ hidev = devm_kzalloc(dev->dev, sizeof(*hidev), GFP_KERNEL);
+ if (!hidev)
+ return -ENOMEM;
+ dev->dev_private = hidev;
+ hidev->dev = dev;
+
+ ret = hibmc_hw_init(hidev);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ hibmc_unload(dev);
+ DRM_ERROR("failed to initialize drm driver.\n");
+ return ret;
+}
+
+static int hibmc_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct drm_device *dev;
+ int ret;
+
+ dev = drm_dev_alloc(&hibmc_driver, &pdev->dev);
+ if (!dev)
+ return -ENOMEM;
+
+ dev->pdev = pdev;
+ pci_set_drvdata(pdev, dev);
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ goto err_free;
+
+ ret = hibmc_load(dev, 0);
+ if (ret)
+ goto err_disable;
+
+ ret = drm_dev_register(dev, 0);
+ if (ret)
+ goto err_unload;
+
+ return 0;
+
+err_unload:
+ hibmc_unload(dev);
+err_disable:
+ pci_disable_device(pdev);
+err_free:
+ drm_dev_unref(dev);
+
+ return ret;
+}
+
+static void hibmc_pci_remove(struct pci_dev *pdev)
+{
+ struct drm_device *dev = pci_get_drvdata(pdev);
+
+ drm_dev_unregister(dev);
+ hibmc_unload(dev);
+ drm_dev_unref(dev);
+}
+
+static struct pci_device_id hibmc_pci_table[] = {
+ {0x19e5, 0x1711, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {0,}
+};
+
+static struct pci_driver hibmc_pci_driver = {
+ .name = "hibmc-drm",
+ .id_table = hibmc_pci_table,
+ .probe = hibmc_pci_probe,
+ .remove = hibmc_pci_remove,
+ .driver.pm = &hibmc_pm_ops,
+};
+
+static int __init hibmc_init(void)
+{
+ return pci_register_driver(&hibmc_pci_driver);
+}
+
+static void __exit hibmc_exit(void)
+{
+ return pci_unregister_driver(&hibmc_pci_driver);
+}
+
+module_init(hibmc_init);
+module_exit(hibmc_exit);
+
+MODULE_DEVICE_TABLE(pci, hibmc_pci_table);
+MODULE_AUTHOR("RongrongZou <zourongrong@huawei.com>");
+MODULE_DESCRIPTION("DRM Driver for Hisilicon Hibmc");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
new file mode 100644
index 0000000..0037341
--- /dev/null
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
@@ -0,0 +1,35 @@
+/* Hisilicon Hibmc SoC drm driver
+ *
+ * Based on the bochs drm driver.
+ *
+ * Copyright (c) 2016 Huawei Limited.
+ *
+ * Author:
+ * Rongrong Zou <zourongrong@huawei.com>
+ * Rongrong Zou <zourongrong@gmail.com>
+ * Jianhua Li <lijianhua@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef HIBMC_DRM_DRV_H
+#define HIBMC_DRM_DRV_H
+
+#include <drm/drmP.h>
+
+struct hibmc_drm_device {
+ /* hw */
+ void __iomem *mmio;
+ void __iomem *fb_map;
+ unsigned long fb_base;
+ unsigned long fb_size;
+
+ /* drm */
+ struct drm_device *dev;
+};
+
+#endif
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.c
new file mode 100644
index 0000000..1036542
--- /dev/null
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.c
@@ -0,0 +1,85 @@
+/* Hisilicon Hibmc SoC drm driver
+ *
+ * Based on the bochs drm driver.
+ *
+ * Copyright (c) 2016 Huawei Limited.
+ *
+ * Author:
+ * Rongrong Zou <zourongrong@huawei.com>
+ * Rongrong Zou <zourongrong@gmail.com>
+ * Jianhua Li <lijianhua@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include "hibmc_drm_drv.h"
+#include "hibmc_drm_regs.h"
+
+/*
+ * It can operate in one of three modes: 0, 1 or Sleep.
+ */
+void hibmc_set_power_mode(struct hibmc_drm_device *hidev,
+ unsigned int power_mode)
+{
+ unsigned int control_value = 0;
+ void __iomem *mmio = hidev->mmio;
+
+ if (power_mode > HIBMC_PW_MODE_CTL_MODE_SLEEP)
+ return;
+
+ control_value = readl(mmio + HIBMC_POWER_MODE_CTRL);
+ control_value &= ~HIBMC_PW_MODE_CTL_MODE_MASK;
+
+ control_value |= HIBMC_PW_MODE_CTL_MODE(power_mode) &
+ HIBMC_PW_MODE_CTL_MODE_MASK;
+
+ /* Set up other fields in Power Control Register */
+ if (power_mode == HIBMC_PW_MODE_CTL_MODE_SLEEP) {
+ control_value &= ~HIBMC_PW_MODE_CTL_OSC_INPUT_MASK;
+ control_value |= HIBMC_PW_MODE_CTL_OSC_INPUT(0) &
+ HIBMC_PW_MODE_CTL_OSC_INPUT_MASK;
+ } else {
+ control_value &= ~HIBMC_PW_MODE_CTL_OSC_INPUT_MASK;
+ control_value |= HIBMC_PW_MODE_CTL_OSC_INPUT(1) &
+ HIBMC_PW_MODE_CTL_OSC_INPUT_MASK;
+ }
+ /* Program new power mode. */
+ writel(control_value, mmio + HIBMC_POWER_MODE_CTRL);
+}
+
+static unsigned int hibmc_get_power_mode(struct hibmc_drm_device *hidev)
+{
+ void __iomem *mmio = hidev->mmio;
+
+ return (readl(mmio + HIBMC_POWER_MODE_CTRL) &
+ HIBMC_PW_MODE_CTL_MODE_MASK) >> HIBMC_PW_MODE_CTL_MODE_SHIFT;
+}
+
+void hibmc_set_current_gate(struct hibmc_drm_device *hidev, unsigned int gate)
+{
+ unsigned int gate_reg;
+ unsigned int mode;
+ void __iomem *mmio = hidev->mmio;
+
+ /* Get current power mode. */
+ mode = hibmc_get_power_mode(hidev);
+
+ switch (mode) {
+ case HIBMC_PW_MODE_CTL_MODE_MODE0:
+ gate_reg = HIBMC_MODE0_GATE;
+ break;
+
+ case HIBMC_PW_MODE_CTL_MODE_MODE1:
+ gate_reg = HIBMC_MODE1_GATE;
+ break;
+
+ default:
+ gate_reg = HIBMC_MODE0_GATE;
+ break;
+ }
+ writel(gate, mmio + gate_reg);
+}
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.h b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.h
new file mode 100644
index 0000000..e20e1aa
--- /dev/null
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.h
@@ -0,0 +1,28 @@
+/* Hisilicon Hibmc SoC drm driver
+ *
+ * Based on the bochs drm driver.
+ *
+ * Copyright (c) 2016 Huawei Limited.
+ *
+ * Author:
+ * Rongrong Zou <zourongrong@huawei.com>
+ * Rongrong Zou <zourongrong@gmail.com>
+ * Jianhua Li <lijianhua@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef HIBMC_DRM_POWER_H
+#define HIBMC_DRM_POWER_H
+
+#include "hibmc_drm_drv.h"
+
+void hibmc_set_power_mode(struct hibmc_drm_device *hidev,
+ unsigned int power_mode);
+void hibmc_set_current_gate(struct hibmc_drm_device *hidev,
+ unsigned int gate);
+#endif
diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_regs.h b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_regs.h
new file mode 100644
index 0000000..9c804ca
--- /dev/null
+++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_regs.h
@@ -0,0 +1,212 @@
+/* Hisilicon Hibmc SoC drm driver
+ *
+ * Based on the bochs drm driver.
+ *
+ * Copyright (c) 2016 Huawei Limited.
+ *
+ * Author:
+ * Rongrong Zou <zourongrong@huawei.com>
+ * Rongrong Zou <zourongrong@gmail.com>
+ * Jianhua Li <lijianhua@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef HIBMC_DRM_HW_H
+#define HIBMC_DRM_HW_H
+
+#define OFF 0
+#define ON 1
+#define DISABLE 0
+#define ENABLE 1
+
+/* register definition */
+#define HIBMC_MISC_CTRL 0x4
+
+#define HIBMC_MSCCTL_LOCALMEM_RESET(x) ((x) << 6)
+#define HIBMC_MSCCTL_LOCALMEM_RESET_MASK 0x40
+
+#define RESET 0
+#define NORMAL 1
+
+#define HIBMC_CURRENT_GATE 0x000040
+#define HIBMC_CURR_GATE_DISPLAY(x) ((x) << 2)
+#define HIBMC_CURR_GATE_DISPLAY_MASK 0x4
+
+#define HIBMC_CURR_GATE_LOCALMEM(x) ((x) << 1)
+#define HIBMC_CURR_GATE_LOCALMEM_MASK 0x2
+
+#define HIBMC_MODE0_GATE 0x000044
+#define HIBMC_MODE1_GATE 0x000048
+#define HIBMC_POWER_MODE_CTRL 0x00004C
+
+#define HIBMC_PW_MODE_CTL_OSC_INPUT(x) ((x) << 3)
+#define HIBMC_PW_MODE_CTL_OSC_INPUT_MASK 0x8
+
+#define HIBMC_PW_MODE_CTL_MODE(x) ((x) << 0)
+#define HIBMC_PW_MODE_CTL_MODE_MASK 0x03
+#define HIBMC_PW_MODE_CTL_MODE_SHIFT 0
+
+#define HIBMC_PW_MODE_CTL_MODE_MODE0 0
+#define HIBMC_PW_MODE_CTL_MODE_MODE1 1
+#define HIBMC_PW_MODE_CTL_MODE_SLEEP 2
+
+#define HIBMC_PANEL_PLL_CTRL 0x00005C
+#define HIBMC_CRT_PLL_CTRL 0x000060
+
+#define HIBMC_PLL_CTRL_BYPASS(x) ((x) << 18)
+#define HIBMC_PLL_CTRL_BYPASS_MASK 0x40000
+
+#define HIBMC_PLL_CTRL_POWER(x) ((x) << 17)
+#define HIBMC_PLL_CTRL_POWER_MASK 0x20000
+
+#define HIBMC_PLL_CTRL_INPUT(x) ((x) << 16)
+#define HIBMC_PLL_CTRL_INPUT_MASK 0x10000
+
+#define OSC 0
+#define TESTCLK 1
+
+#define HIBMC_PLL_CTRL_POD(x) ((x) << 14)
+#define HIBMC_PLL_CTRL_POD_MASK 0xC000
+
+#define HIBMC_PLL_CTRL_OD(x) ((x) << 12)
+#define HIBMC_PLL_CTRL_OD_MASK 0x3000
+
+#define HIBMC_PLL_CTRL_N(x) ((x) << 8)
+#define HIBMC_PLL_CTRL_N_MASK 0xF00
+
+#define HIBMC_PLL_CTRL_M(x) ((x) << 0)
+#define HIBMC_PLL_CTRL_M_MASK 0xFF
+
+#define HIBMC_CRT_DISP_CTL 0x80200
+
+#define HIBMC_CRT_DISP_CTL_CRTSELECT(x) ((x) << 25)
+#define HIBMC_CRT_DISP_CTL_CRTSELECT_MASK 0x2000000
+
+#define CRTSELECT_VGA 0
+#define CRTSELECT_CRT 1
+
+#define HIBMC_CRT_DISP_CTL_CLOCK_PHASE(x) ((x) << 14)
+#define HIBMC_CRT_DISP_CTL_CLOCK_PHASE_MASK 0x4000
+
+#define PHASE_ACTIVE_HIGH 0
+#define PHASE_ACTIVE_LOW 1
+
+#define HIBMC_CRT_DISP_CTL_VSYNC_PHASE(x) ((x) << 13)
+#define HIBMC_CRT_DISP_CTL_VSYNC_PHASE_MASK 0x2000
+
+#define HIBMC_CRT_DISP_CTL_HSYNC_PHASE(x) ((x) << 12)
+#define HIBMC_CRT_DISP_CTL_HSYNC_PHASE_MASK 0x1000
+
+#define HIBMC_CRT_DISP_CTL_TIMING(x) ((x) << 8)
+#define HIBMC_CRT_DISP_CTL_TIMING_MASK 0x100
+
+#define HIBMC_CRT_DISP_CTL_PLANE(x) ((x) << 2)
+#define HIBMC_CRT_DISP_CTL_PLANE_MASK 4
+
+#define HIBMC_CRT_DISP_CTL_FORMAT(x) ((x) << 0)
+#define HIBMC_CRT_DISP_CTL_FORMAT_MASK 0x03
+
+#define HIBMC_CRT_FB_ADDRESS 0x080204
+
+#define HIBMC_CRT_FB_WIDTH 0x080208
+#define HIBMC_CRT_FB_WIDTH_WIDTH(x) ((x) << 16)
+#define HIBMC_CRT_FB_WIDTH_WIDTH_MASK 0x3FFF0000
+#define HIBMC_CRT_FB_WIDTH_OFFS(x) ((x) << 0)
+#define HIBMC_CRT_FB_WIDTH_OFFS_MASK 0x3FFF
+
+#define HIBMC_CRT_HORZ_TOTAL 0x08020C
+#define HIBMC_CRT_HORZ_TOTAL_TOTAL(x) ((x) << 16)
+#define HIBMC_CRT_HORZ_TOTAL_TOTAL_MASK 0xFFF0000
+
+#define HIBMC_CRT_HORZ_TOTAL_DISPLAY_END(x) ((x) << 0)
+#define HIBMC_CRT_HORZ_TOTAL_DISPLAY_END_MASK 0xFFF
+
+#define HIBMC_CRT_HORZ_SYNC 0x080210
+#define HIBMC_CRT_HORZ_SYNC_WIDTH(x) ((x) << 16)
+#define HIBMC_CRT_HORZ_SYNC_WIDTH_MASK 0xFF0000
+
+#define HIBMC_CRT_HORZ_SYNC_START(x) ((x) << 0)
+#define HIBMC_CRT_HORZ_SYNC_START_MASK 0xFFF
+
+#define HIBMC_CRT_VERT_TOTAL 0x080214
+#define HIBMC_CRT_VERT_TOTAL_TOTAL(x) ((x) << 16)
+#define HIBMC_CRT_VERT_TOTAL_TOTAL_MASK 0x7FFF0000
+
+#define HIBMC_CRT_VERT_TOTAL_DISPLAY_END(x) ((x) << 0)
+#define HIBMC_CRT_VERT_TOTAL_DISPLAY_END_MASK 0x7FF
+
+#define HIBMC_CRT_VERT_SYNC 0x080218
+#define HIBMC_CRT_VERT_SYNC_HEIGHT(x) ((x) << 16)
+#define HIBMC_CRT_VERT_SYNC_HEIGHT_MASK 0x3F0000
+
+#define HIBMC_CRT_VERT_SYNC_START(x) ((x) << 0)
+#define HIBMC_CRT_VERT_SYNC_START_MASK 0x7FF
+
+/* Auto Centering */
+#define HIBMC_CRT_AUTO_CENTERING_TL 0x080280
+#define HIBMC_CRT_AUTO_CENTERING_TL_TOP(x) ((x) << 16)
+#define HIBMC_CRT_AUTO_CENTERING_TL_TOP_MSK 0x7FF0000
+
+#define HIBMC_CRT_AUTO_CENTERING_TL_LEFT(x) ((x) << 0)
+#define HIBMC_CRT_AUTO_CENTERING_TL_LEFT_MSK 0x7FF
+
+#define HIBMC_CRT_AUTO_CENTERING_BR 0x080284
+#define HIBMC_CRT_AUTO_CENTERING_BR_BOTTOM(x) ((x) << 16)
+#define HIBMC_CRT_AUTO_CENTERING_BR_BOTTOM_MASK 0x7FF0000
+
+#define HIBMC_CRT_AUTO_CENTERING_BR_RIGHT(x) ((x) << 0)
+#define HIBMC_CRT_AUTO_CENTERING_BR_RIGHT_MASK 0x7FF
+
+/* register to control panel output */
+#define DISPLAY_CONTROL_HISILE 0x80288
+
+#define HIBMC_RAW_INTERRUPT 0x80290
+#define HIBMC_RAW_INTERRUPT_VBLANK(x) ((x) << 2)
+#define HIBMC_RAW_INTERRUPT_VBLANK_MASK 0x4
+
+#define HIBMC_RAW_INTERRUPT_EN 0x80298
+#define HIBMC_RAW_INTERRUPT_EN_VBLANK(x) ((x) << 2)
+#define HIBMC_RAW_INTERRUPT_EN_VBLANK_MASK 0x4
+
+/* register and values for PLL control */
+#define CRT_PLL1_HS 0x802a8
+#define CRT_PLL1_HS_25MHZ 0x23d40f02
+#define CRT_PLL1_HS_40MHZ 0x23940801
+#define CRT_PLL1_HS_65MHZ 0x23940d01
+#define CRT_PLL1_HS_78MHZ 0x23540F82
+#define CRT_PLL1_HS_74MHZ 0x23941dc2
+#define CRT_PLL1_HS_80MHZ 0x23941001
+#define CRT_PLL1_HS_80MHZ_1152 0x23540fc2
+#define CRT_PLL1_HS_108MHZ 0x23b41b01
+#define CRT_PLL1_HS_162MHZ 0x23480681
+#define CRT_PLL1_HS_148MHZ 0x23541dc2
+#define CRT_PLL1_HS_193MHZ 0x234807c1
+
+#define CRT_PLL2_HS 0x802ac
+#define CRT_PLL2_HS_25MHZ 0x206B851E
+#define CRT_PLL2_HS_40MHZ 0x30000000
+#define CRT_PLL2_HS_65MHZ 0x40000000
+#define CRT_PLL2_HS_78MHZ 0x50E147AE
+#define CRT_PLL2_HS_74MHZ 0x602B6AE7
+#define CRT_PLL2_HS_80MHZ 0x70000000
+#define CRT_PLL2_HS_108MHZ 0x80000000
+#define CRT_PLL2_HS_162MHZ 0xA0000000
+#define CRT_PLL2_HS_148MHZ 0xB0CCCCCD
+#define CRT_PLL2_HS_193MHZ 0xC0872B02
+
+/* Global macros */
+#define RGB(r, g, b) \
+( \
+ (unsigned long)(((r) << 16) | ((g) << 8) | (b)) \
+)
+
+#define PADDING(align, data) (((data) + (align) - 1) & (~((align) - 1)))
+
+#define MB(x) ((x) << 20)
+
+#endif
--
1.9.1
^ permalink raw reply related
* [PATCH v6 0/9] Add DRM driver for Hisilicon Hibmc
From: Rongrong Zou @ 2016-10-28 7:27 UTC (permalink / raw)
To: linux-arm-kernel
This patch set adds a new drm driver for Hisilicon Hibmc. Hibmc is a
BMC SoC with a display controller intergrated, usually it is used on
server for Out-of-band management purpose. In this patch set, we just
support basic function for Hibmc display subsystem. Hibmc display
subsystem is connected to host CPU by PCIe as blow:
+----------+ +----------+
| | PCIe | Hibmc |
|host CPU( |<----->| display |
|arm64,x86)| |subsystem |
+----------+ +----------+
Hardware Detail for Hibmc display subsystem
-----------
The display subsystem of Hibmc is show as bellow:
+----+ +----+ +----+ +--------+
| | | | | | | |
| FB |----->| DE |----->|VDAC|---->|external|
| | | | | | | VGA |
+----+ +----+ +----+ +--------+
-DE(Display Engine) is the display controller.
-VDAC(Video Digital-to-Analog converter) converts the RGB diaital data
stream from DE to VGA analog signals.
Change History
------------
Changes in v6:
-remove the embedded framebuffer and use a pointer of hibmc_framebuffer
instead.
-remove the deprecated drm_framebuffer_unregister_private(),
drm_framebuffer_unreference() will be called in hibmc_fbdev_destroy().
-uninstall irq in hibmc_unload().
Changes in v5:
-rebase on v4.9-rc2.
-replace drm_fb_helper_set_suspend with drm_fb_helper_set_suspend_unlocked.
and remove redundant console_lock and console_unlock.
Changes in v4:
-remove unused include files, and include header file when it is needed.
-remove unused FLAG in Kconfig: DRM_GEM_CMA_HELPER/DRM_KMS_CMA_HELPER.
-remove drm_helper_disable_unused_functions, since we use DRIVER_ATOMIC.
Changes in v3:
-enable KMS, in v2, only fbdev is enabled.
-management video memory with ttm.
-add vblank interrupt.
-remove drm_connector_register_all() and drm_connector_unregister_all().
-I have a basic test with igt.
Changes in v2:
-Remove self-defined macros for bit operations.
-Remove unused register.
-Replace those deprecated functions with new version of them.
-use drm_connector_register_all() to register connector after
drm_dev_register().
The patch v2 is at
https://lists.freedesktop.org/archives/dri-devel/2016-May/108661.html
Rongrong Zou (9):
drm/hisilicon/hibmc: Add hisilicon hibmc drm master driver
drm/hisilicon/hibmc: Add video memory management
drm/hisilicon/hibmc: Add support for frame buffer
drm/hisilicon/hibmc: Add plane for DE
drm/hisilicon/hibmc: Add crtc for DE
drm/hisilicon/hibmc: Add encoder for VDAC
drm/hisilicon/hibmc: Add connector for VDAC
drm/hisilicon/hibmc: Add vblank interruput
MAINTAINERS: Update HISILICON DRM entries
MAINTAINERS | 1 +
drivers/gpu/drm/hisilicon/Kconfig | 1 +
drivers/gpu/drm/hisilicon/Makefile | 1 +
drivers/gpu/drm/hisilicon/hibmc/Kconfig | 9 +
drivers/gpu/drm/hisilicon/hibmc/Makefile | 5 +
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c | 488 +++++++++++++++++++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.h | 29 ++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c | 419 ++++++++++++++++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h | 117 +++++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c | 255 ++++++++++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.c | 85 ++++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.h | 28 ++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_regs.h | 212 ++++++++
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_vdac.c | 165 +++++++
drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c | 562 ++++++++++++++++++++++
15 files changed, 2377 insertions(+)
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/Kconfig
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/Makefile
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.c
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_de.h
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_fbdev.c
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.c
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_power.h
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_regs.h
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_vdac.c
create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c
--
1.9.1
^ permalink raw reply
* [PATCH v2 2/2] arm64: dts: hi6220: add resets property into dwmmc nodes
From: Leo Yan @ 2016-10-28 7:26 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CAKfTPtAXdkKcfpHmUmQNwuJxO0PORcCf49noST_CCkZPigPwgw@mail.gmail.com>
On Fri, Oct 28, 2016 at 08:43:51AM +0200, Vincent Guittot wrote:
[...]
> > running with? Also do you have any details about the card in case its
> > card specific?
>
> The sdcard is quite common: sandisk ultra 16GB
> and my rootfs is on the sdcard
I'm using rootfs in emmc also have same failure.
> > Guodong: Is there any bootloader dependency on that change?
>
> FYI, I use firmwares available in AOSP
I tried latest firmware [1], still cannot boot up until revert the
patch "arm64: dts: hi6220: add resets property into dwmmc nodes".
[1] http://builds.96boards.org/snapshots/hikey/linaro/uefi-openplatformpkg/latest/
Thanks,
Leo Yan
^ permalink raw reply
* [PATCHv4 00/15] clk: ti: add support for hwmod clocks
From: Tero Kristo @ 2016-10-28 7:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161028005341.GR26139@codeaurora.org>
On 28/10/16 03:53, Stephen Boyd wrote:
> On 10/18, Tero Kristo wrote:
>> Hi,
>>
>> As a recap, this series is part of the ongoing work to get rid of the
>> hwmod database under mach-omap2 folder. This series converts the
>> existing clock related functionality to a new clock type, which will
>> allow removing all the .clkctrl related items from hwmod database.
>> This series adds sample solution for OMAP4 only, rest of the SoCs can
>> be converted automatically once the approach is acceptable.
>>
>> v4 has the following high level changes compared to v3:
>> - Clock data is now statically built-in to the driver
>> - Adds clockdomain provider support, which can be used to fetch
>> clocks based on clockdomain relation. Only clockdomains need to be
>> registered within DT.
>> - Added some automatic clock alias generation support to the TI clock
>> drivers, if this is not acceptable, I can change this to add all the
>> aliases under the individual drivers/clk/ti/clk-xyz.c files
>
> Is there a plan to get rid of the aliases entirely? Or we can't
> do that because DT is not fully supported on these platforms? I'm
> mostly wondering how long that sort of code is going to stick
> around and if it's better to fully compartmentalize it to the
> SoCs that are affected or if it should be a core feature of TI
> driver.
Eventually that should happen. However, we have plenty of legacy code
still in place which depend on clk_get functionality within kernel. The
major contributing factor is the hwmod codebase, for which we have plans to:
- get this clock driver merged
- implement a new interconnect driver for OMAP family SoCs
- interconnect driver will use DT handles for fetching clocks, rather
than clock aliases
- reset handling will be implemented as part of the interconnect driver
somehow (no prototype / clear plans for that as of yet)
- all the hwmod stuff can be dropped
The clock alias handling is still needed as a transition phase until all
the above is done, then we can start dropping them. Basically anything
that is using omap_hwmod depends on the clock aliases right now.
>
>> - As a sample, only omap4 clock data is available with this set
>>
>> After this series, the clock data can be dropped from the hwmod database
>> for OMAP4, I have working patches for this for anybody interested. Also,
>> the DT files require some modifications to add proper support for
>> clockdomain providers, and drop some unnecessary clock nodes.
>
> Can this be shared as a git tree on the web? Hopefully I can see
> the resulting DTS and understand what's going on better.
Sure, here is a test branch I've been using, it has some extra hacks on
top for debugging purposes, but the DTS changes are visible also.
https://github.com/t-kristo/linux-pm/tree/4.9-rc1-hwmod-clks-w-data
>
>>
>> Boot + simple PM test seems to be working on OMAP4 with this set, and
>> boot test with other boards I have access to don't seem to cause any
>> issues. Applies on top of 4.9-rc1.
>>
>
> Awesome!
>
^ permalink raw reply
* [v13, 5/8] soc: fsl: add GUTS driver for QorIQ platforms
From: Y.B. Lu @ 2016-10-28 7:08 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477629956.6812.15.camel@buserror.net>
> -----Original Message-----
> From: Y.B. Lu
> Sent: Friday, October 28, 2016 2:06 PM
> To: Y.B. Lu; 'Scott Wood'; 'linux-mmc at vger.kernel.org';
> 'ulf.hansson at linaro.org'; 'Arnd Bergmann'
> Cc: 'linuxppc-dev at lists.ozlabs.org'; 'devicetree at vger.kernel.org';
> 'linux-arm-kernel at lists.infradead.org'; 'linux-kernel at vger.kernel.org';
> 'linux-clk at vger.kernel.org'; 'linux-i2c at vger.kernel.org';
> 'iommu at lists.linux-foundation.org'; 'netdev at vger.kernel.org'; 'Greg
> Kroah-Hartman'; 'Mark Rutland'; 'Rob Herring'; 'Russell King'; 'Jochen
> Friedrich'; 'Joerg Roedel'; 'Claudiu Manoil'; 'Bhupesh Sharma'; Qiang
> Zhao; 'Kumar Gala'; 'Santosh Shilimkar'; Leo Li; X.B. Xie; M.H. Lian
> Subject: RE: [v13, 5/8] soc: fsl: add GUTS driver for QorIQ platforms
>
> > -----Original Message-----
> > From: Y.B. Lu
> > Sent: Friday, October 28, 2016 2:00 PM
> > To: 'Scott Wood'; linux-mmc at vger.kernel.org; ulf.hansson at linaro.org;
> > Arnd Bergmann
> > Cc: linuxppc-dev at lists.ozlabs.org; devicetree at vger.kernel.org;
> > linux-arm- kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> > linux- clk at vger.kernel.org; linux-i2c at vger.kernel.org;
> > iommu at lists.linux- foundation.org; netdev at vger.kernel.org; Greg
> > Kroah-Hartman; Mark Rutland; Rob Herring; Russell King; Jochen
> > Friedrich; Joerg Roedel; Claudiu Manoil; Bhupesh Sharma; Qiang Zhao;
> Kumar Gala; Santosh Shilimkar; Leo Li; X.B.
> > Xie; M.H. Lian
> > Subject: RE: [v13, 5/8] soc: fsl: add GUTS driver for QorIQ platforms
> >
> >
> >
> > > -----Original Message-----
> > > From: linux-mmc-owner at vger.kernel.org [mailto:linux-mmc-
> > > owner at vger.kernel.org] On Behalf Of Scott Wood
> > > Sent: Friday, October 28, 2016 12:46 PM
> > > To: Y.B. Lu; linux-mmc at vger.kernel.org; ulf.hansson at linaro.org; Arnd
> > > Bergmann
> > > Cc: linuxppc-dev at lists.ozlabs.org; devicetree at vger.kernel.org;
> > > linux-arm- kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> > > linux- clk at vger.kernel.org; linux-i2c at vger.kernel.org;
> > > iommu at lists.linux- foundation.org; netdev at vger.kernel.org; Greg
> > > Kroah-Hartman; Mark Rutland; Rob Herring; Russell King; Jochen
> > > Friedrich; Joerg Roedel; Claudiu Manoil; Bhupesh Sharma; Qiang Zhao;
> > Kumar Gala; Santosh Shilimkar; Leo Li; X.B.
> > > Xie; M.H. Lian
> > > Subject: Re: [v13, 5/8] soc: fsl: add GUTS driver for QorIQ
> > > platforms
> > >
> > > On Fri, 2016-10-28 at 11:32 +0800, Yangbo Lu wrote:
> > > > + guts->regs = of_iomap(np, 0);
> > > > + if (!guts->regs)
> > > > + return -ENOMEM;
> > > > +
> > > > + /* Register soc device */
> > > > + machine = of_flat_dt_get_machine_name();
> > > > + if (machine)
> > > > + soc_dev_attr.machine = devm_kstrdup(dev, machine,
> > > > GFP_KERNEL);
> > > > +
> > > > + svr = fsl_guts_get_svr();
> > > > + soc_die = fsl_soc_die_match(svr, fsl_soc_die);
> > > > + if (soc_die) {
> > > > + soc_dev_attr.family = devm_kasprintf(dev, GFP_KERNEL,
> > > > + ?????"QorIQ %s", soc_die-
> > > > >die);
> > > > + } else {
> > > > + soc_dev_attr.family = devm_kasprintf(dev, GFP_KERNEL,
> > > > "QorIQ");
> > > > + }
> > > > + soc_dev_attr.soc_id = devm_kasprintf(dev, GFP_KERNEL,
> > > > + ?????"svr:0x%08x", svr);
> > > > + soc_dev_attr.revision = devm_kasprintf(dev, GFP_KERNEL,
> "%d.%d",
> > > > + ???????SVR_MAJ(svr), SVR_MIN(svr));
> > > > +
> > > > + soc_dev = soc_device_register(&soc_dev_attr);
> > > > + if (IS_ERR(soc_dev))
> > > > + return PTR_ERR(soc_dev);
> > >
> > > ioremap leaks on this error path. ?Use devm_ioremap_resource().
> > >
> >
> > [Lu Yangbo-B47093] Ok. I have fixed it in v14. Thanks :)
>
> [Lu Yangbo-B47093] Sorry, used the wrong error code... Will resent it
[Lu Yangbo-B47093] The v15 had been sent. And dropped patch 'dt: bindings: update Freescale DCFG compatible',
since that work has been done by below patch on ShawnGuo's linux tree.
'dt-bindings: fsl: add LS1043A/LS1046A/LS2080A compatible for SCFG and DCFG'
https://git.kernel.org/cgit/linux/kernel/git/shawnguo/linux.git/commit/?h=imx/dt64&id=981034a2bfcaff5c95dafde24d7abfe7f9025c19
Thanks.
>
> >
> > > -Scott
> > >
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe linux-mmc"
> > > in the body of a message to majordomo at vger.kernel.org More majordomo
> > > info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v2 3/3] ARM: dts: sun8i: Add dts file for NanoPi M1 SBC
From: Milo Kim @ 2016-10-28 6:59 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161028065903.23298-1-woogyom.kim@gmail.com>
NanoPi M1 is the Allwinner H3 based board.
This patch enables UART for debug console, LEDs, GPIO key switch, 3 USB
host ports, a micro SD slot and related power and pin controls by using
NanoPi common dtsi file.
Cc: James Pettigrew <james@innovum.com.au>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
---
arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts | 64 ++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
new file mode 100644
index 0000000..ec63d10
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+ model = "FriendlyArm NanoPi M1";
+ compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
--
2.9.3
^ permalink raw reply related
* [PATCH v2 2/3] ARM: dts: sun8i: Use the common file in NanoPi NEO SBC
From: Milo Kim @ 2016-10-28 6:59 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161028065903.23298-1-woogyom.kim@gmail.com>
NanoPi common dtsi supports all components of NEO SBC, so just include it.
Cc: James Pettigrew <james@innovum.com.au>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
---
arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts | 79 +------------------------------
1 file changed, 1 insertion(+), 78 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
index 3d64caf..8d2cc6e 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
@@ -40,86 +40,9 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/dts-v1/;
-#include "sun8i-h3.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun8i-h3-nanopi.dtsi"
/ {
model = "FriendlyARM NanoPi NEO";
compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
-
- pwr {
- label = "nanopi:green:pwr";
- gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
- default-state = "on";
- };
-
- status {
- label = "nanopi:blue:status";
- gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
- };
- };
-};
-
-&ehci3 {
- status = "okay";
-};
-
-&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
- cd-inverted;
- status = "okay";
-};
-
-&ohci3 {
- status = "okay";
-};
-
-&pio {
- leds_opc: led-pins {
- allwinner,pins = "PA10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-};
-
-&r_pio {
- leds_r_opc: led-pins {
- allwinner,pins = "PL10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
-};
-
-&usbphy {
- /* USB VBUS is always on */
- status = "okay";
};
--
2.9.3
^ permalink raw reply related
* [PATCH v2 1/3] ARM: dts: sun8i: Add common dtsi file for NanoPi SBCs
From: Milo Kim @ 2016-10-28 6:59 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161028065903.23298-1-woogyom.kim@gmail.com>
This patch provides a common file for NanoPi M1 and Neo SBC.
Those have common features below.
* UART0
* 2 LEDs
* USB host (EHCI3, OHCI3) and PHY
* MicroSD
* GPIO key switch
Cc: James Pettigrew <james@innovum.com.au>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
---
arch/arm/boot/dts/sun8i-h3-nanopi.dtsi | 144 +++++++++++++++++++++++++++++++++
1 file changed, 144 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
new file mode 100644
index 0000000..8038aa2
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_npi>, <&leds_r_npi>;
+
+ status {
+ label = "nanopi:blue:status";
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ pwr {
+ label = "nanopi:green:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ r_gpio_keys {
+ compatible = "gpio-keys";
+ input-name = "k1";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sw_r_npi>;
+
+ k1 at 0 {
+ label = "k1";
+ linux,code = <KEY_POWER>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&mmc0 {
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ status = "okay";
+ vmmc-supply = <®_vcc3v3>;
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&pio {
+ leds_npi: led_pins at 0 {
+ allwinner,pins = "PA10";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&r_pio {
+ leds_r_npi: led_pins at 0 {
+ allwinner,pins = "PL10";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ sw_r_npi: key_pins at 0 {
+ allwinner,pins = "PL3";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
--
2.9.3
^ permalink raw reply related
* [PATCH v2 0/3] ARM: dts: sun8i: Support NanoPi SBCs
From: Milo Kim @ 2016-10-28 6:59 UTC (permalink / raw)
To: linux-arm-kernel
NanoPi M1 and NEO have common features, so duplicate properties can be
moved into new dtsi file.
v2:
Add James's copyrights in NanoPi common dtsi file
Milo Kim (3):
ARM: dts: sun8i: Add common dtsi file for NanoPi SBCs
ARM: dts: sun8i: Use the common file in NanoPi NEO SBC
ARM: dts: sun8i: Add dts file for NanoPi M1 SBC
arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts | 64 +++++++++++++
arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts | 79 +---------------
arch/arm/boot/dts/sun8i-h3-nanopi.dtsi | 144 ++++++++++++++++++++++++++++++
3 files changed, 209 insertions(+), 78 deletions(-)
create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
--
2.9.3
^ permalink raw reply
* [PATCH v2 4/4] spi: sun6i: Support Allwinner H3 SPI controller
From: Milo Kim @ 2016-10-28 6:54 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161028065412.23008-1-woogyom.kim@gmail.com>
H3 has two SPI controllers. The size of the buffer is 64 * 8.
(8 bit transfer by 64 entry FIFO)
A31 has four controllers. The size of the buffer is 128 * 8.
(8 bit transfer by 128 entry FIFO)
Register maps are sharable, so sun6i SPI driver is reusable with
device configuration.
Use the variable, 'fifo_depth' instead of fixed value to support both SPI
controllers.
Cc: Mark Brown <broonie@kernel.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
---
drivers/spi/spi-sun6i.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index 9918a57..e311483 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
@@ -24,6 +25,7 @@
#include <linux/spi/spi.h>
#define SUN6I_FIFO_DEPTH 128
+#define SUN8I_FIFO_DEPTH 64
#define SUN6I_GBL_CTL_REG 0x04
#define SUN6I_GBL_CTL_BUS_ENABLE BIT(0)
@@ -90,6 +92,7 @@ struct sun6i_spi {
const u8 *tx_buf;
u8 *rx_buf;
int len;
+ unsigned long fifo_depth;
};
static inline u32 sun6i_spi_read(struct sun6i_spi *sspi, u32 reg)
@@ -155,7 +158,9 @@ static void sun6i_spi_set_cs(struct spi_device *spi, bool enable)
static size_t sun6i_spi_max_transfer_size(struct spi_device *spi)
{
- return SUN6I_FIFO_DEPTH - 1;
+ struct sun6i_spi *sspi = spi_master_get_devdata(spi->master);
+
+ return sspi->fifo_depth - 1;
}
static int sun6i_spi_transfer_one(struct spi_master *master,
@@ -170,7 +175,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
u32 reg;
/* We don't support transfer larger than the FIFO */
- if (tfr->len > SUN6I_FIFO_DEPTH)
+ if (tfr->len > sspi->fifo_depth)
return -EINVAL;
reinit_completion(&sspi->done);
@@ -265,7 +270,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
SUN6I_BURST_CTL_CNT_STC(tx_len));
/* Fill the TX FIFO */
- sun6i_spi_fill_fifo(sspi, SUN6I_FIFO_DEPTH);
+ sun6i_spi_fill_fifo(sspi, sspi->fifo_depth);
/* Enable the interrupts */
sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC);
@@ -288,7 +293,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
goto out;
}
- sun6i_spi_drain_fifo(sspi, SUN6I_FIFO_DEPTH);
+ sun6i_spi_drain_fifo(sspi, sspi->fifo_depth);
out:
sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0);
@@ -398,6 +403,8 @@ static int sun6i_spi_probe(struct platform_device *pdev)
}
sspi->master = master;
+ sspi->fifo_depth = (unsigned long)of_device_get_match_data(&pdev->dev);
+
master->max_speed_hz = 100 * 1000 * 1000;
master->min_speed_hz = 3 * 1000;
master->set_cs = sun6i_spi_set_cs;
@@ -470,7 +477,8 @@ static int sun6i_spi_remove(struct platform_device *pdev)
}
static const struct of_device_id sun6i_spi_match[] = {
- { .compatible = "allwinner,sun6i-a31-spi", },
+ { .compatible = "allwinner,sun6i-a31-spi", .data = (void *)SUN6I_FIFO_DEPTH },
+ { .compatible = "allwinner,sun8i-h3-spi", .data = (void *)SUN8I_FIFO_DEPTH },
{}
};
MODULE_DEVICE_TABLE(of, sun6i_spi_match);
--
2.9.3
^ permalink raw reply related
* [PATCH v2 3/4] spi: sun6i: Add binding for Allwinner H3 SPI controller
From: Milo Kim @ 2016-10-28 6:54 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161028065412.23008-1-woogyom.kim@gmail.com>
H3 SPI has same architecture as A31 except FIFO capacity.
To configure the buffer size separately, compatible property should be
different. Optional DMA specifiers and example are added.
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
---
.../devicetree/bindings/spi/spi-sun6i.txt | 25 ++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
index 21de73d..2ec99b8 100644
--- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt
+++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
@@ -1,7 +1,7 @@
-Allwinner A31 SPI controller
+Allwinner A31/H3 SPI controller
Required properties:
-- compatible: Should be "allwinner,sun6i-a31-spi".
+- compatible: Should be "allwinner,sun6i-a31-spi" or "allwinner,sun8i-h3-spi".
- reg: Should contain register location and length.
- interrupts: Should contain interrupt.
- clocks: phandle to the clocks feeding the SPI controller. Two are
@@ -12,6 +12,11 @@ Required properties:
- resets: phandle to the reset controller asserting this device in
reset
+Optional properties:
+- dmas: DMA specifiers for rx and tx dma. See the DMA client binding,
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "rx" and "tx" if present.
+
Example:
spi1: spi at 01c69000 {
@@ -22,3 +27,19 @@ spi1: spi at 01c69000 {
clock-names = "ahb", "mod";
resets = <&ahb1_rst 21>;
};
+
+spi0: spi at 01c68000 {
+ compatible = "allwinner,sun8i-h3-spi";
+ reg = <0x01c68000 0x1000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 23>, <&dma 23>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
--
2.9.3
^ permalink raw reply related
* [PATCH v2 2/4] ARM: dts: sun8i: Add SPI controller node in H3
From: Milo Kim @ 2016-10-28 6:54 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161028065412.23008-1-woogyom.kim@gmail.com>
H3 SPI subsystem is almost same as A31 SPI except buffer size, so those
DT properties are reusable.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 8a59d8d..c38b028 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -439,6 +439,38 @@
clocks = <&osc24M>;
};
+ spi0: spi at 01c68000 {
+ compatible = "allwinner,sun8i-h3-spi";
+ reg = <0x01c68000 0x1000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 23>, <&dma 23>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi at 01c69000 {
+ compatible = "allwinner,sun8i-h3-spi";
+ reg = <0x01c69000 0x1000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 24>, <&dma 24>;
+ dma-names = "rx", "tx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ resets = <&ccu RST_BUS_SPI1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
wdt0: watchdog at 01c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
--
2.9.3
^ permalink raw reply related
* [PATCH v2 1/4] ARM: dts: sun8i: Add SPI pinctrl node in H3
From: Milo Kim @ 2016-10-28 6:54 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161028065412.23008-1-woogyom.kim@gmail.com>
H3 supports two SPI controllers. Four pins (MOSI, MISO, SCLK, SS) are
configured through the pinctrl subsystem.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 75a8654..8a59d8d 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -381,6 +381,20 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ spi0_pins: spi0 {
+ allwinner,pins = "PC0", "PC1", "PC2", "PC3";
+ allwinner,function = "spi0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi1_pins: spi1 {
+ allwinner,pins = "PA15", "PA16", "PA14", "PA13";
+ allwinner,function = "spi1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
uart0_pins_a: uart0 at 0 {
allwinner,pins = "PA4", "PA5";
allwinner,function = "uart0";
--
2.9.3
^ permalink raw reply related
* [PATCH v2 0/4] Support H3 SPI controller
From: Milo Kim @ 2016-10-28 6:54 UTC (permalink / raw)
To: linux-arm-kernel
Allwinner H3 SPI controller has same architecture as A31.
So most configuration is identical except one thing - FIFO capacity.
A31 H3
------------------------------------
Number of controllers 4 2
Number of FIFO depth 128 64
Transfer bits 8 8
Register maps are sharable, so sun6i SPI driver is reusable with
device configuration.
Tested on Nano Pi M1 and SPI slave device is TI LP8860.
v2:
Include DTS patches
Use of_device_get_match_data() helper to get device specific data
Fix build warning of 64bit CPU architecture
(warning: cast from pointer to integer of different size
[-Wpointer-to-int-cast])
Milo Kim (4):
ARM: dts: sun8i: Add SPI pinctrl node in H3
ARM: dts: sun8i: Add SPI controller node in H3
spi: sun6i: Add binding for Allwinner H3 SPI controller
spi: sun6i: Support Allwinner H3 SPI controller
.../devicetree/bindings/spi/spi-sun6i.txt | 25 +++++++++++-
arch/arm/boot/dts/sun8i-h3.dtsi | 46 ++++++++++++++++++++++
drivers/spi/spi-sun6i.c | 18 ++++++---
3 files changed, 82 insertions(+), 7 deletions(-)
--
2.9.3
^ permalink raw reply
* [v15, 7/7] mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0
From: Yangbo Lu @ 2016-10-28 6:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477637418-38938-1-git-send-email-yangbo.lu@nxp.com>
The eSDHC of T4240-R1.0-R2.0 has incorrect vender version and spec version.
Acturally the right version numbers should be VVN=0x13 and SVN = 0x1.
This patch adds the GUTS driver support for eSDHC driver to match SoC.
And fix host version to avoid that incorrect version numbers break down
the ADMA data transfer.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Scott Wood <oss@buserror.net>
---
Changes for v2:
- Got SVR through iomap instead of dts
Changes for v3:
- Managed GUTS through syscon instead of iomap in eSDHC driver
Changes for v4:
- Got SVR by GUTS driver instead of SYSCON
Changes for v5:
- Changed to get SVR through API fsl_guts_get_svr()
- Combined patch 4, patch 5 and patch 6 into one
Changes for v6:
- Added 'Acked-by: Ulf Hansson'
Changes for v7:
- None
Changes for v8:
- Added 'Acked-by: Scott Wood'
Changes for v9:
- None
Changes for v10:
- None
Changes for v11:
- Changed to use soc_device_match
Changes for v12:
- Matched soc through .family field instead of .soc_id
Changes for v13:
- None
Changes for v14:
- None
Changes for v15:
- None
---
drivers/mmc/host/Kconfig | 1 +
drivers/mmc/host/sdhci-of-esdhc.c | 20 ++++++++++++++++++++
2 files changed, 21 insertions(+)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 5274f50..a1135a9 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -144,6 +144,7 @@ config MMC_SDHCI_OF_ESDHC
depends on MMC_SDHCI_PLTFM
depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE
select MMC_SDHCI_IO_ACCESSORS
+ select FSL_GUTS
help
This selects the Freescale eSDHC controller support.
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index fb71c86..57bdb9e 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -18,6 +18,7 @@
#include <linux/of.h>
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/sys_soc.h>
#include <linux/mmc/host.h>
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"
@@ -28,6 +29,7 @@
struct sdhci_esdhc {
u8 vendor_ver;
u8 spec_ver;
+ bool quirk_incorrect_hostver;
};
/**
@@ -73,6 +75,8 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host,
static u16 esdhc_readw_fixup(struct sdhci_host *host,
int spec_reg, u32 value)
{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
u16 ret;
int shift = (spec_reg & 0x2) * 8;
@@ -80,6 +84,12 @@ static u16 esdhc_readw_fixup(struct sdhci_host *host,
ret = value & 0xffff;
else
ret = (value >> shift) & 0xffff;
+ /* Workaround for T4240-R1.0-R2.0 eSDHC which has incorrect
+ * vendor version and spec version information.
+ */
+ if ((spec_reg == SDHCI_HOST_VERSION) &&
+ (esdhc->quirk_incorrect_hostver))
+ ret = (VENDOR_V_23 << SDHCI_VENDOR_VER_SHIFT) | SDHCI_SPEC_200;
return ret;
}
@@ -558,6 +568,12 @@ static const struct sdhci_pltfm_data sdhci_esdhc_le_pdata = {
.ops = &sdhci_esdhc_le_ops,
};
+static struct soc_device_attribute soc_incorrect_hostver[] = {
+ { .family = "QorIQ T4240", .revision = "1.0", },
+ { .family = "QorIQ T4240", .revision = "2.0", },
+ { },
+};
+
static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host;
@@ -571,6 +587,10 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
esdhc->vendor_ver = (host_ver & SDHCI_VENDOR_VER_MASK) >>
SDHCI_VENDOR_VER_SHIFT;
esdhc->spec_ver = host_ver & SDHCI_SPEC_VER_MASK;
+ if (soc_device_match(soc_incorrect_hostver))
+ esdhc->quirk_incorrect_hostver = true;
+ else
+ esdhc->quirk_incorrect_hostver = false;
}
static int sdhci_esdhc_probe(struct platform_device *pdev)
--
2.1.0.27.g96db324
^ permalink raw reply related
* [v15, 6/7] base: soc: introduce soc_device_match() interface
From: Yangbo Lu @ 2016-10-28 6:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477637418-38938-1-git-send-email-yangbo.lu@nxp.com>
From: Arnd Bergmann <arnd@arndb.de>
We keep running into cases where device drivers want to know the exact
version of the a SoC they are currently running on. In the past, this has
usually been done through a vendor specific API that can be called by a
driver, or by directly accessing some kind of version register that is
not part of the device itself but that belongs to a global register area
of the chip.
Common reasons for doing this include:
- A machine is not using devicetree or similar for passing data about
on-chip devices, but just announces their presence using boot-time
platform devices, and the machine code itself does not care about the
revision.
- There is existing firmware or boot loaders with existing DT binaries
with generic compatible strings that do not identify the particular
revision of each device, but the driver knows which SoC revisions
include which part.
- A prerelease version of a chip has some quirks and we are using the same
version of the bootloader and the DT blob on both the prerelease and the
final version. An update of the DT binding seems inappropriate because
that would involve maintaining multiple copies of the dts and/or
bootloader.
This patch introduces the soc_device_match() interface that is meant to
work like of_match_node() but instead of identifying the version of a
device, it identifies the SoC itself using a vendor-agnostic interface.
Unlike of_match_node(), we do not do an exact string compare but instead
use glob_match() to allow wildcards in strings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Changes for v11:
- Added this patch for soc match
Changes for v12:
- Corrected the author
- Rewrited soc_device_match with while loop
Changes for v13:
- Added ack from Greg
Changes for v14:
- None
Changes for v15:
- None
---
drivers/base/Kconfig | 1 +
drivers/base/soc.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/sys_soc.h | 3 +++
3 files changed, 70 insertions(+)
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index fdf44ca..991b21e 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -235,6 +235,7 @@ config GENERIC_CPU_AUTOPROBE
config SOC_BUS
bool
+ select GLOB
source "drivers/base/regmap/Kconfig"
diff --git a/drivers/base/soc.c b/drivers/base/soc.c
index b63f23e..0c5cf87 100644
--- a/drivers/base/soc.c
+++ b/drivers/base/soc.c
@@ -13,6 +13,7 @@
#include <linux/spinlock.h>
#include <linux/sys_soc.h>
#include <linux/err.h>
+#include <linux/glob.h>
static DEFINE_IDA(soc_ida);
@@ -159,3 +160,68 @@ static int __init soc_bus_register(void)
return bus_register(&soc_bus_type);
}
core_initcall(soc_bus_register);
+
+static int soc_device_match_one(struct device *dev, void *arg)
+{
+ struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
+ const struct soc_device_attribute *match = arg;
+
+ if (match->machine &&
+ !glob_match(match->machine, soc_dev->attr->machine))
+ return 0;
+
+ if (match->family &&
+ !glob_match(match->family, soc_dev->attr->family))
+ return 0;
+
+ if (match->revision &&
+ !glob_match(match->revision, soc_dev->attr->revision))
+ return 0;
+
+ if (match->soc_id &&
+ !glob_match(match->soc_id, soc_dev->attr->soc_id))
+ return 0;
+
+ return 1;
+}
+
+/*
+ * soc_device_match - identify the SoC in the machine
+ * @matches: zero-terminated array of possible matches
+ *
+ * returns the first matching entry of the argument array, or NULL
+ * if none of them match.
+ *
+ * This function is meant as a helper in place of of_match_node()
+ * in cases where either no device tree is available or the information
+ * in a device node is insufficient to identify a particular variant
+ * by its compatible strings or other properties. For new devices,
+ * the DT binding should always provide unique compatible strings
+ * that allow the use of of_match_node() instead.
+ *
+ * The calling function can use the .data entry of the
+ * soc_device_attribute to pass a structure or function pointer for
+ * each entry.
+ */
+const struct soc_device_attribute *soc_device_match(
+ const struct soc_device_attribute *matches)
+{
+ int ret = 0;
+
+ if (!matches)
+ return NULL;
+
+ while (!ret) {
+ if (!(matches->machine || matches->family ||
+ matches->revision || matches->soc_id))
+ break;
+ ret = bus_for_each_dev(&soc_bus_type, NULL, (void *)matches,
+ soc_device_match_one);
+ if (!ret)
+ matches++;
+ else
+ return matches;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(soc_device_match);
diff --git a/include/linux/sys_soc.h b/include/linux/sys_soc.h
index 2739ccb..9f5eb06 100644
--- a/include/linux/sys_soc.h
+++ b/include/linux/sys_soc.h
@@ -13,6 +13,7 @@ struct soc_device_attribute {
const char *family;
const char *revision;
const char *soc_id;
+ const void *data;
};
/**
@@ -34,4 +35,6 @@ void soc_device_unregister(struct soc_device *soc_dev);
*/
struct device *soc_device_to_device(struct soc_device *soc);
+const struct soc_device_attribute *soc_device_match(
+ const struct soc_device_attribute *matches);
#endif /* __SOC_BUS_H */
--
2.1.0.27.g96db324
^ permalink raw reply related
* [v15, 5/7] MAINTAINERS: add entry for Freescale SoC drivers
From: Yangbo Lu @ 2016-10-28 6:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477637418-38938-1-git-send-email-yangbo.lu@nxp.com>
Add maintainer entry for Freescale SoC drivers including
the QE library and the GUTS driver now. Also add maintainer
for QE library.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
Acked-by: Qiang Zhao <qiang.zhao@nxp.com>
---
Changes for v8:
- Added this patch
Changes for v9:
- Added linux-arm mail list
- Removed GUTS driver entry
Changes for v10:
- Changed 'DRIVER' to 'DRIVERS'
- Added 'Acked-by' of Scott and Qiang
Changes for v11:
- None
Changes for v12:
- None
Changes for v13:
- None
Changes for v14:
- None
Changes for v15:
- None
---
MAINTAINERS | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index c72fa18..cf3aaee 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5037,9 +5037,18 @@ S: Maintained
F: drivers/net/ethernet/freescale/fman
F: Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+FREESCALE SOC DRIVERS
+M: Scott Wood <oss@buserror.net>
+L: linuxppc-dev at lists.ozlabs.org
+L: linux-arm-kernel at lists.infradead.org
+S: Maintained
+F: drivers/soc/fsl/
+F: include/linux/fsl/
+
FREESCALE QUICC ENGINE LIBRARY
+M: Qiang Zhao <qiang.zhao@nxp.com>
L: linuxppc-dev at lists.ozlabs.org
-S: Orphan
+S: Maintained
F: drivers/soc/fsl/qe/
F: include/soc/fsl/*qe*.h
F: include/soc/fsl/*ucc*.h
--
2.1.0.27.g96db324
^ permalink raw reply related
* [v15, 4/7] soc: fsl: add GUTS driver for QorIQ platforms
From: Yangbo Lu @ 2016-10-28 6:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477637418-38938-1-git-send-email-yangbo.lu@nxp.com>
The global utilities block controls power management, I/O device
enabling, power-onreset(POR) configuration monitoring, alternate
function selection for multiplexed signals,and clock control.
This patch adds a driver to manage and access global utilities block.
Initially only reading SVR and registering soc device are supported.
Other guts accesses, such as reading RCW, should eventually be moved
into this driver as well.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
Changes for v4:
- Added this patch
Changes for v5:
- Modified copyright info
- Changed MODULE_LICENSE to GPL
- Changed EXPORT_SYMBOL_GPL to EXPORT_SYMBOL
- Made FSL_GUTS user-invisible
- Added a complete compatible list for GUTS
- Stored guts info in file-scope variable
- Added mfspr() getting SVR
- Redefined GUTS APIs
- Called fsl_guts_init rather than using platform driver
- Removed useless parentheses
- Removed useless 'extern' key words
Changes for v6:
- Made guts thread safe in fsl_guts_init
Changes for v7:
- Removed 'ifdef' for function declaration in guts.h
Changes for v8:
- Fixes lines longer than 80 characters checkpatch issue
- Added 'Acked-by: Scott Wood'
Changes for v9:
- None
Changes for v10:
- None
Changes for v11:
- Changed to platform driver
Changes for v12:
- Removed "signed-off-by: Scott"
- Defined fsl_soc_die_attr struct array instead of
soc_device_attribute
- Re-designed soc_device_attribute for QorIQ SoC
- Other minor fixes
Changes for v13:
- Rebased
- Removed text after 'bool' in Kconfig
- Removed ARCH ifdefs
- Added more bits for ls1021a mask
- Used devm
Changes for v14:
- Used devm_ioremap_resource
Changes for v15:
- Fixed error code for devm_ioremap_resource
---
drivers/soc/Kconfig | 3 +-
drivers/soc/fsl/Kconfig | 18 ++++
drivers/soc/fsl/Makefile | 1 +
drivers/soc/fsl/guts.c | 237 +++++++++++++++++++++++++++++++++++++++++++++++
include/linux/fsl/guts.h | 125 +++++++++++++++----------
5 files changed, 334 insertions(+), 50 deletions(-)
create mode 100644 drivers/soc/fsl/Kconfig
create mode 100644 drivers/soc/fsl/guts.c
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index e6e90e8..f31bceb 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -1,8 +1,7 @@
menu "SOC (System On Chip) specific Drivers"
source "drivers/soc/bcm/Kconfig"
-source "drivers/soc/fsl/qbman/Kconfig"
-source "drivers/soc/fsl/qe/Kconfig"
+source "drivers/soc/fsl/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/rockchip/Kconfig"
diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
new file mode 100644
index 0000000..7a9fb9b
--- /dev/null
+++ b/drivers/soc/fsl/Kconfig
@@ -0,0 +1,18 @@
+#
+# Freescale SOC drivers
+#
+
+source "drivers/soc/fsl/qbman/Kconfig"
+source "drivers/soc/fsl/qe/Kconfig"
+
+config FSL_GUTS
+ bool
+ select SOC_BUS
+ help
+ The global utilities block controls power management, I/O device
+ enabling, power-onreset(POR) configuration monitoring, alternate
+ function selection for multiplexed signals,and clock control.
+ This driver is to manage and access global utilities block.
+ Initially only reading SVR and registering soc device are supported.
+ Other guts accesses, such as reading RCW, should eventually be moved
+ into this driver as well.
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
index 75e1f53..44b3beb 100644
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_FSL_DPAA) += qbman/
obj-$(CONFIG_QUICC_ENGINE) += qe/
obj-$(CONFIG_CPM) += qe/
+obj-$(CONFIG_FSL_GUTS) += guts.o
diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c
new file mode 100644
index 0000000..e564d1a
--- /dev/null
+++ b/drivers/soc/fsl/guts.c
@@ -0,0 +1,237 @@
+/*
+ * Freescale QorIQ Platforms GUTS Driver
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of_fdt.h>
+#include <linux/sys_soc.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/fsl/guts.h>
+#include <linux/fsl/svr.h>
+
+struct guts {
+ struct ccsr_guts __iomem *regs;
+ bool little_endian;
+};
+
+struct fsl_soc_die_attr {
+ char *die;
+ u32 svr;
+ u32 mask;
+};
+
+static struct guts *guts;
+static struct soc_device_attribute soc_dev_attr;
+static struct soc_device *soc_dev;
+
+
+/* SoC die attribute definition for QorIQ platform */
+static const struct fsl_soc_die_attr fsl_soc_die[] = {
+ /*
+ * Power Architecture-based SoCs T Series
+ */
+
+ /* Die: T4240, SoC: T4240/T4160/T4080 */
+ { .die = "T4240",
+ .svr = 0x82400000,
+ .mask = 0xfff00000,
+ },
+ /* Die: T1040, SoC: T1040/T1020/T1042/T1022 */
+ { .die = "T1040",
+ .svr = 0x85200000,
+ .mask = 0xfff00000,
+ },
+ /* Die: T2080, SoC: T2080/T2081 */
+ { .die = "T2080",
+ .svr = 0x85300000,
+ .mask = 0xfff00000,
+ },
+ /* Die: T1024, SoC: T1024/T1014/T1023/T1013 */
+ { .die = "T1024",
+ .svr = 0x85400000,
+ .mask = 0xfff00000,
+ },
+
+ /*
+ * ARM-based SoCs LS Series
+ */
+
+ /* Die: LS1043A, SoC: LS1043A/LS1023A */
+ { .die = "LS1043A",
+ .svr = 0x87920000,
+ .mask = 0xffff0000,
+ },
+ /* Die: LS2080A, SoC: LS2080A/LS2040A/LS2085A */
+ { .die = "LS2080A",
+ .svr = 0x87010000,
+ .mask = 0xff3f0000,
+ },
+ /* Die: LS1088A, SoC: LS1088A/LS1048A/LS1084A/LS1044A */
+ { .die = "LS1088A",
+ .svr = 0x87030000,
+ .mask = 0xff3f0000,
+ },
+ /* Die: LS1012A, SoC: LS1012A */
+ { .die = "LS1012A",
+ .svr = 0x87040000,
+ .mask = 0xffff0000,
+ },
+ /* Die: LS1046A, SoC: LS1046A/LS1026A */
+ { .die = "LS1046A",
+ .svr = 0x87070000,
+ .mask = 0xffff0000,
+ },
+ /* Die: LS2088A, SoC: LS2088A/LS2048A/LS2084A/LS2044A */
+ { .die = "LS2088A",
+ .svr = 0x87090000,
+ .mask = 0xff3f0000,
+ },
+ /* Die: LS1021A, SoC: LS1021A/LS1020A/LS1022A */
+ { .die = "LS1021A",
+ .svr = 0x87000000,
+ .mask = 0xfff70000,
+ },
+ { },
+};
+
+static const struct fsl_soc_die_attr *fsl_soc_die_match(
+ u32 svr, const struct fsl_soc_die_attr *matches)
+{
+ while (matches->svr) {
+ if (matches->svr == (svr & matches->mask))
+ return matches;
+ matches++;
+ };
+ return NULL;
+}
+
+u32 fsl_guts_get_svr(void)
+{
+ u32 svr = 0;
+
+ if (!guts || !guts->regs)
+ return svr;
+
+ if (guts->little_endian)
+ svr = ioread32(&guts->regs->svr);
+ else
+ svr = ioread32be(&guts->regs->svr);
+
+ return svr;
+}
+EXPORT_SYMBOL(fsl_guts_get_svr);
+
+static int fsl_guts_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ const struct fsl_soc_die_attr *soc_die;
+ const char *machine;
+ u32 svr;
+
+ /* Initialize guts */
+ guts = devm_kzalloc(dev, sizeof(*guts), GFP_KERNEL);
+ if (!guts)
+ return -ENOMEM;
+
+ guts->little_endian = of_property_read_bool(np, "little-endian");
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ guts->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(guts->regs))
+ return PTR_ERR(guts->regs);
+
+ /* Register soc device */
+ machine = of_flat_dt_get_machine_name();
+ if (machine)
+ soc_dev_attr.machine = devm_kstrdup(dev, machine, GFP_KERNEL);
+
+ svr = fsl_guts_get_svr();
+ soc_die = fsl_soc_die_match(svr, fsl_soc_die);
+ if (soc_die) {
+ soc_dev_attr.family = devm_kasprintf(dev, GFP_KERNEL,
+ "QorIQ %s", soc_die->die);
+ } else {
+ soc_dev_attr.family = devm_kasprintf(dev, GFP_KERNEL, "QorIQ");
+ }
+ soc_dev_attr.soc_id = devm_kasprintf(dev, GFP_KERNEL,
+ "svr:0x%08x", svr);
+ soc_dev_attr.revision = devm_kasprintf(dev, GFP_KERNEL, "%d.%d",
+ SVR_MAJ(svr), SVR_MIN(svr));
+
+ soc_dev = soc_device_register(&soc_dev_attr);
+ if (IS_ERR(soc_dev))
+ return PTR_ERR(soc_dev);
+
+ pr_info("Machine: %s\n", soc_dev_attr.machine);
+ pr_info("SoC family: %s\n", soc_dev_attr.family);
+ pr_info("SoC ID: %s, Revision: %s\n",
+ soc_dev_attr.soc_id, soc_dev_attr.revision);
+ return 0;
+}
+
+static int fsl_guts_remove(struct platform_device *dev)
+{
+ soc_device_unregister(soc_dev);
+ return 0;
+}
+
+/*
+ * Table for matching compatible strings, for device tree
+ * guts node, for Freescale QorIQ SOCs.
+ */
+static const struct of_device_id fsl_guts_of_match[] = {
+ { .compatible = "fsl,qoriq-device-config-1.0", },
+ { .compatible = "fsl,qoriq-device-config-2.0", },
+ { .compatible = "fsl,p1010-guts", },
+ { .compatible = "fsl,p1020-guts", },
+ { .compatible = "fsl,p1021-guts", },
+ { .compatible = "fsl,p1022-guts", },
+ { .compatible = "fsl,p1023-guts", },
+ { .compatible = "fsl,p2020-guts", },
+ { .compatible = "fsl,bsc9131-guts", },
+ { .compatible = "fsl,bsc9132-guts", },
+ { .compatible = "fsl,mpc8536-guts", },
+ { .compatible = "fsl,mpc8544-guts", },
+ { .compatible = "fsl,mpc8548-guts", },
+ { .compatible = "fsl,mpc8568-guts", },
+ { .compatible = "fsl,mpc8569-guts", },
+ { .compatible = "fsl,mpc8572-guts", },
+ { .compatible = "fsl,ls1021a-dcfg", },
+ { .compatible = "fsl,ls1043a-dcfg", },
+ { .compatible = "fsl,ls2080a-dcfg", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, fsl_guts_of_match);
+
+static struct platform_driver fsl_guts_driver = {
+ .driver = {
+ .name = "fsl-guts",
+ .of_match_table = fsl_guts_of_match,
+ },
+ .probe = fsl_guts_probe,
+ .remove = fsl_guts_remove,
+};
+
+static int __init fsl_guts_init(void)
+{
+ return platform_driver_register(&fsl_guts_driver);
+}
+core_initcall(fsl_guts_init);
+
+static void __exit fsl_guts_exit(void)
+{
+ platform_driver_unregister(&fsl_guts_driver);
+}
+module_exit(fsl_guts_exit);
diff --git a/include/linux/fsl/guts.h b/include/linux/fsl/guts.h
index 649e917..3efa3b8 100644
--- a/include/linux/fsl/guts.h
+++ b/include/linux/fsl/guts.h
@@ -29,83 +29,112 @@
* #ifdefs.
*/
struct ccsr_guts {
- __be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */
- __be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */
- __be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */
- __be32 pordevsr; /* 0x.000c - POR I/O Device Status Register */
- __be32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */
- __be32 pordevsr2; /* 0x.0014 - POR device status register 2 */
+ u32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */
+ u32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */
+ u32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and
+ * Control Register
+ */
+ u32 pordevsr; /* 0x.000c - POR I/O Device Status Register */
+ u32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */
+ u32 pordevsr2; /* 0x.0014 - POR device status register 2 */
u8 res018[0x20 - 0x18];
- __be32 porcir; /* 0x.0020 - POR Configuration Information Register */
+ u32 porcir; /* 0x.0020 - POR Configuration Information
+ * Register
+ */
u8 res024[0x30 - 0x24];
- __be32 gpiocr; /* 0x.0030 - GPIO Control Register */
+ u32 gpiocr; /* 0x.0030 - GPIO Control Register */
u8 res034[0x40 - 0x34];
- __be32 gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */
+ u32 gpoutdr; /* 0x.0040 - General-Purpose Output Data
+ * Register
+ */
u8 res044[0x50 - 0x44];
- __be32 gpindr; /* 0x.0050 - General-Purpose Input Data Register */
+ u32 gpindr; /* 0x.0050 - General-Purpose Input Data
+ * Register
+ */
u8 res054[0x60 - 0x54];
- __be32 pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */
- __be32 pmuxcr2; /* 0x.0064 - Alternate function signal multiplex control 2 */
- __be32 dmuxcr; /* 0x.0068 - DMA Mux Control Register */
+ u32 pmuxcr; /* 0x.0060 - Alternate Function Signal
+ * Multiplex Control
+ */
+ u32 pmuxcr2; /* 0x.0064 - Alternate function signal
+ * multiplex control 2
+ */
+ u32 dmuxcr; /* 0x.0068 - DMA Mux Control Register */
u8 res06c[0x70 - 0x6c];
- __be32 devdisr; /* 0x.0070 - Device Disable Control */
+ u32 devdisr; /* 0x.0070 - Device Disable Control */
#define CCSR_GUTS_DEVDISR_TB1 0x00001000
#define CCSR_GUTS_DEVDISR_TB0 0x00004000
- __be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */
+ u32 devdisr2; /* 0x.0074 - Device Disable Control 2 */
u8 res078[0x7c - 0x78];
- __be32 pmjcr; /* 0x.007c - 4 Power Management Jog Control Register */
- __be32 powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */
- __be32 pmrccr; /* 0x.0084 - Power Management Reset Counter Configuration Register */
- __be32 pmpdccr; /* 0x.0088 - Power Management Power Down Counter Configuration Register */
- __be32 pmcdr; /* 0x.008c - 4Power management clock disable register */
- __be32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */
- __be32 rstrscr; /* 0x.0094 - Reset Request Status and Control Register */
- __be32 ectrstcr; /* 0x.0098 - Exception reset control register */
- __be32 autorstsr; /* 0x.009c - Automatic reset status register */
- __be32 pvr; /* 0x.00a0 - Processor Version Register */
- __be32 svr; /* 0x.00a4 - System Version Register */
+ u32 pmjcr; /* 0x.007c - 4 Power Management Jog Control
+ * Register
+ */
+ u32 powmgtcsr; /* 0x.0080 - Power Management Status and
+ * Control Register
+ */
+ u32 pmrccr; /* 0x.0084 - Power Management Reset Counter
+ * Configuration Register
+ */
+ u32 pmpdccr; /* 0x.0088 - Power Management Power Down Counter
+ * Configuration Register
+ */
+ u32 pmcdr; /* 0x.008c - 4Power management clock disable
+ * register
+ */
+ u32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */
+ u32 rstrscr; /* 0x.0094 - Reset Request Status and
+ * Control Register
+ */
+ u32 ectrstcr; /* 0x.0098 - Exception reset control register */
+ u32 autorstsr; /* 0x.009c - Automatic reset status register */
+ u32 pvr; /* 0x.00a0 - Processor Version Register */
+ u32 svr; /* 0x.00a4 - System Version Register */
u8 res0a8[0xb0 - 0xa8];
- __be32 rstcr; /* 0x.00b0 - Reset Control Register */
+ u32 rstcr; /* 0x.00b0 - Reset Control Register */
u8 res0b4[0xc0 - 0xb4];
- __be32 iovselsr; /* 0x.00c0 - I/O voltage select status register
+ u32 iovselsr; /* 0x.00c0 - I/O voltage select status register
Called 'elbcvselcr' on 86xx SOCs */
u8 res0c4[0x100 - 0xc4];
- __be32 rcwsr[16]; /* 0x.0100 - Reset Control Word Status registers
+ u32 rcwsr[16]; /* 0x.0100 - Reset Control Word Status registers
There are 16 registers */
u8 res140[0x224 - 0x140];
- __be32 iodelay1; /* 0x.0224 - IO delay control register 1 */
- __be32 iodelay2; /* 0x.0228 - IO delay control register 2 */
+ u32 iodelay1; /* 0x.0224 - IO delay control register 1 */
+ u32 iodelay2; /* 0x.0228 - IO delay control register 2 */
u8 res22c[0x604 - 0x22c];
- __be32 pamubypenr; /* 0x.604 - PAMU bypass enable register */
+ u32 pamubypenr; /* 0x.604 - PAMU bypass enable register */
u8 res608[0x800 - 0x608];
- __be32 clkdvdr; /* 0x.0800 - Clock Divide Register */
+ u32 clkdvdr; /* 0x.0800 - Clock Divide Register */
u8 res804[0x900 - 0x804];
- __be32 ircr; /* 0x.0900 - Infrared Control Register */
+ u32 ircr; /* 0x.0900 - Infrared Control Register */
u8 res904[0x908 - 0x904];
- __be32 dmacr; /* 0x.0908 - DMA Control Register */
+ u32 dmacr; /* 0x.0908 - DMA Control Register */
u8 res90c[0x914 - 0x90c];
- __be32 elbccr; /* 0x.0914 - eLBC Control Register */
+ u32 elbccr; /* 0x.0914 - eLBC Control Register */
u8 res918[0xb20 - 0x918];
- __be32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */
- __be32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */
- __be32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */
+ u32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */
+ u32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */
+ u32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */
u8 resb2c[0xe00 - 0xb2c];
- __be32 clkocr; /* 0x.0e00 - Clock Out Select Register */
+ u32 clkocr; /* 0x.0e00 - Clock Out Select Register */
u8 rese04[0xe10 - 0xe04];
- __be32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */
+ u32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */
u8 rese14[0xe20 - 0xe14];
- __be32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */
- __be32 cpfor; /* 0x.0e24 - L2 charge pump fuse override register */
+ u32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */
+ u32 cpfor; /* 0x.0e24 - L2 charge pump fuse override
+ * register
+ */
u8 rese28[0xf04 - 0xe28];
- __be32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */
- __be32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */
+ u32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */
+ u32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */
u8 resf0c[0xf2c - 0xf0c];
- __be32 itcr; /* 0x.0f2c - Internal transaction control register */
+ u32 itcr; /* 0x.0f2c - Internal transaction control
+ * register
+ */
u8 resf30[0xf40 - 0xf30];
- __be32 srds2cr0; /* 0x.0f40 - SerDes2 Control Register 0 */
- __be32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */
+ u32 srds2cr0; /* 0x.0f40 - SerDes2 Control Register 0 */
+ u32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */
} __attribute__ ((packed));
+u32 fsl_guts_get_svr(void);
/* Alternate function signal multiplex control */
#define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))
--
2.1.0.27.g96db324
^ permalink raw reply related
* [v15, 3/7] powerpc/fsl: move mpc85xx.h to include/linux/fsl
From: Yangbo Lu @ 2016-10-28 6:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477637418-38938-1-git-send-email-yangbo.lu@nxp.com>
Move mpc85xx.h to include/linux/fsl and rename it to svr.h as a common
header file. This SVR numberspace is used on some ARM chips as well as
PPC, and even to check for a PPC SVR multi-arch drivers would otherwise
need to ifdef the header inclusion and all references to the SVR symbols.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
[scottwood: update description]
Signed-off-by: Scott Wood <oss@buserror.net>
---
Changes for v2:
- None
Changes for v3:
- None
Changes for v4:
- None
Changes for v5:
- Changed to Move mpc85xx.h to include/linux/fsl/
- Adjusted '#include <linux/fsl/svr.h>' position in file
Changes for v6:
- None
Changes for v7:
- Added 'Acked-by: Wolfram Sang' for I2C part
- Also applied to arch/powerpc/kernel/cpu_setup_fsl_booke.S
Changes for v8:
- Added 'Acked-by: Stephen Boyd' for clk part
- Added 'Acked-by: Scott Wood'
- Added 'Acked-by: Joerg Roedel' for iommu part
Changes for v9:
- None
Changes for v10:
- None
Changes for v11:
- Updated description by Scott
Changes for v12:
- None
Changes for v13:
- None
Changes for v14:
- None
Changes for v15:
- None
---
arch/powerpc/kernel/cpu_setup_fsl_booke.S | 2 +-
arch/powerpc/sysdev/fsl_pci.c | 2 +-
drivers/clk/clk-qoriq.c | 3 +--
drivers/i2c/busses/i2c-mpc.c | 2 +-
drivers/iommu/fsl_pamu.c | 3 +--
drivers/net/ethernet/freescale/gianfar.c | 2 +-
arch/powerpc/include/asm/mpc85xx.h => include/linux/fsl/svr.h | 4 ++--
7 files changed, 8 insertions(+), 10 deletions(-)
rename arch/powerpc/include/asm/mpc85xx.h => include/linux/fsl/svr.h (97%)
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index 462aed9..2b0284e 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -13,13 +13,13 @@
*
*/
+#include <linux/fsl/svr.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/cputable.h>
#include <asm/ppc_asm.h>
#include <asm/mmu-book3e.h>
#include <asm/asm-offsets.h>
-#include <asm/mpc85xx.h>
_GLOBAL(__e500_icache_setup)
mfspr r0, SPRN_L1CSR1
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index d3a5974..cb0efea 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/fsl/edac.h>
+#include <linux/fsl/svr.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/memblock.h>
@@ -37,7 +38,6 @@
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
#include <asm/machdep.h>
-#include <asm/mpc85xx.h>
#include <asm/disassemble.h>
#include <asm/ppc-opcode.h>
#include <sysdev/fsl_soc.h>
diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 20b1055..dc778e8 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -13,6 +13,7 @@
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/fsl/guts.h>
+#include <linux/fsl/svr.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -1153,8 +1154,6 @@ static struct clk *clockgen_clk_get(struct of_phandle_args *clkspec, void *data)
}
#ifdef CONFIG_PPC
-#include <asm/mpc85xx.h>
-
static const u32 a4510_svrs[] __initconst = {
(SVR_P2040 << 8) | 0x10, /* P2040 1.0 */
(SVR_P2040 << 8) | 0x11, /* P2040 1.1 */
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 565a49a..e791c51 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -27,9 +27,9 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/fsl/svr.h>
#include <asm/mpc52xx.h>
-#include <asm/mpc85xx.h>
#include <sysdev/fsl_soc.h>
#define DRV_NAME "mpc-i2c"
diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
index a34355f..af8fb27 100644
--- a/drivers/iommu/fsl_pamu.c
+++ b/drivers/iommu/fsl_pamu.c
@@ -21,11 +21,10 @@
#include "fsl_pamu.h"
#include <linux/fsl/guts.h>
+#include <linux/fsl/svr.h>
#include <linux/interrupt.h>
#include <linux/genalloc.h>
-#include <asm/mpc85xx.h>
-
/* define indexes for each operation mapping scenario */
#define OMI_QMAN 0x00
#define OMI_FMAN 0x01
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 4b4f5bc..55be5ce 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -86,11 +86,11 @@
#include <linux/udp.h>
#include <linux/in.h>
#include <linux/net_tstamp.h>
+#include <linux/fsl/svr.h>
#include <asm/io.h>
#ifdef CONFIG_PPC
#include <asm/reg.h>
-#include <asm/mpc85xx.h>
#endif
#include <asm/irq.h>
#include <asm/uaccess.h>
diff --git a/arch/powerpc/include/asm/mpc85xx.h b/include/linux/fsl/svr.h
similarity index 97%
rename from arch/powerpc/include/asm/mpc85xx.h
rename to include/linux/fsl/svr.h
index 213f3a8..8d13836 100644
--- a/arch/powerpc/include/asm/mpc85xx.h
+++ b/include/linux/fsl/svr.h
@@ -9,8 +9,8 @@
* (at your option) any later version.
*/
-#ifndef __ASM_PPC_MPC85XX_H
-#define __ASM_PPC_MPC85XX_H
+#ifndef FSL_SVR_H
+#define FSL_SVR_H
#define SVR_REV(svr) ((svr) & 0xFF) /* SOC design resision */
#define SVR_MAJ(svr) (((svr) >> 4) & 0xF) /* Major revision field*/
--
2.1.0.27.g96db324
^ permalink raw reply related
* [v15, 2/7] dt: bindings: move guts devicetree doc out of powerpc directory
From: Yangbo Lu @ 2016-10-28 6:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477637418-38938-1-git-send-email-yangbo.lu@nxp.com>
Move guts devicetree doc to Documentation/devicetree/bindings/soc/fsl/
since it's used by not only PowerPC but also ARM. And add a specification
for 'little-endian' property.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Scott Wood <oss@buserror.net>
---
Changes for v4:
- Added this patch
Changes for v5:
- Modified the description for little-endian property
Changes for v6:
- None
Changes for v7:
- None
Changes for v8:
- Added 'Acked-by: Scott Wood'
- Added 'Acked-by: Rob Herring'
Changes for v9:
- None
Changes for v10:
- None
Changes for v11:
- None
Changes for v12:
- None
Changes for v13:
- None
Changes for v14:
- None
Changes for v15:
- None
---
Documentation/devicetree/bindings/{powerpc => soc}/fsl/guts.txt | 3 +++
1 file changed, 3 insertions(+)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/guts.txt (91%)
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt b/Documentation/devicetree/bindings/soc/fsl/guts.txt
similarity index 91%
rename from Documentation/devicetree/bindings/powerpc/fsl/guts.txt
rename to Documentation/devicetree/bindings/soc/fsl/guts.txt
index b71b203..07adca9 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/guts.txt
@@ -25,6 +25,9 @@ Recommended properties:
- fsl,liodn-bits : Indicates the number of defined bits in the LIODN
registers, for those SOCs that have a PAMU device.
+ - little-endian : Indicates that the global utilities block is little
+ endian. The default is big endian.
+
Examples:
global-utilities at e0000 { /* global utilities block */
compatible = "fsl,mpc8548-guts";
--
2.1.0.27.g96db324
^ permalink raw reply related
* [v15, 1/7] ARM64: dts: ls2080a: add device configuration node
From: Yangbo Lu @ 2016-10-28 6:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477637418-38938-1-git-send-email-yangbo.lu@nxp.com>
Add the dts node for device configuration unit that provides
general purpose configuration and status for the device.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
---
Changes for v5:
- Added this patch
Changes for v6:
- None
Changes for v7:
- None
Changes for v8:
- Added 'Acked-by: Scott Wood'
Changes for v9:
- None
Changes for v10:
- None
Changes for v11:
- None
Changes for v12:
- None
Changes for v13:
- None
Changes for v14:
- None
Changes for v15:
- None
---
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 337da90..c03b099 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -215,6 +215,12 @@
clocks = <&sysclk>;
};
+ dcfg: dcfg at 1e00000 {
+ compatible = "fsl,ls2080a-dcfg", "syscon";
+ reg = <0x0 0x1e00000 0x0 0x10000>;
+ little-endian;
+ };
+
serial0: serial at 21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
--
2.1.0.27.g96db324
^ permalink raw reply related
* [v15, 0/7] Fix eSDHC host version register bug
From: Yangbo Lu @ 2016-10-28 6:50 UTC (permalink / raw)
To: linux-arm-kernel
This patchset is used to fix a host version register bug in the T4240-R1.0-R2.0
eSDHC controller. To match the SoC version and revision, 10 previous version
patchsets had tried many methods but all of them were rejected by reviewers.
Such as
- dts compatible method
- syscon method
- ifdef PPC method
- GUTS driver getting SVR method
Anrd suggested a soc_device_match method in v10, and this is the only available
method left now. This v11 patchset introduces the soc_device_match interface in
soc driver.
The first five patches of Yangbo are to add the GUTS driver. This is used to
register a soc device which contain soc version and revision information.
The other two patches introduce the soc_device_match method in soc driver
and apply it on esdhc driver to fix this bug.
---
Changes for v15:
- Dropped patch 'dt: bindings: update Freescale DCFG compatible'
since the work had been done by below patch on ShawnGuo's linux tree.
'dt-bindings: fsl: add LS1043A/LS1046A/LS2080A compatible for SCFG
and DCFG'
- Fixed error code issue in guts driver
---
Arnd Bergmann (1):
base: soc: introduce soc_device_match() interface
Yangbo Lu (6):
ARM64: dts: ls2080a: add device configuration node
dt: bindings: move guts devicetree doc out of powerpc directory
powerpc/fsl: move mpc85xx.h to include/linux/fsl
soc: fsl: add GUTS driver for QorIQ platforms
MAINTAINERS: add entry for Freescale SoC drivers
mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0
.../bindings/{powerpc => soc}/fsl/guts.txt | 3 +
MAINTAINERS | 11 +-
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 6 +
arch/powerpc/kernel/cpu_setup_fsl_booke.S | 2 +-
arch/powerpc/sysdev/fsl_pci.c | 2 +-
drivers/base/Kconfig | 1 +
drivers/base/soc.c | 66 ++++++
drivers/clk/clk-qoriq.c | 3 +-
drivers/i2c/busses/i2c-mpc.c | 2 +-
drivers/iommu/fsl_pamu.c | 3 +-
drivers/mmc/host/Kconfig | 1 +
drivers/mmc/host/sdhci-of-esdhc.c | 20 ++
drivers/net/ethernet/freescale/gianfar.c | 2 +-
drivers/soc/Kconfig | 3 +-
drivers/soc/fsl/Kconfig | 18 ++
drivers/soc/fsl/Makefile | 1 +
drivers/soc/fsl/guts.c | 237 +++++++++++++++++++++
include/linux/fsl/guts.h | 125 ++++++-----
.../asm/mpc85xx.h => include/linux/fsl/svr.h | 4 +-
include/linux/sys_soc.h | 3 +
20 files changed, 452 insertions(+), 61 deletions(-)
rename Documentation/devicetree/bindings/{powerpc => soc}/fsl/guts.txt (91%)
create mode 100644 drivers/soc/fsl/Kconfig
create mode 100644 drivers/soc/fsl/guts.c
rename arch/powerpc/include/asm/mpc85xx.h => include/linux/fsl/svr.h (97%)
--
2.1.0.27.g96db324
^ permalink raw reply
* [v13, 5/8] soc: fsl: add GUTS driver for QorIQ platforms
From: Y.B. Lu @ 2016-10-28 6:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1477629956.6812.15.camel@buserror.net>
> -----Original Message-----
> From: Y.B. Lu
> Sent: Friday, October 28, 2016 2:00 PM
> To: 'Scott Wood'; linux-mmc at vger.kernel.org; ulf.hansson at linaro.org; Arnd
> Bergmann
> Cc: linuxppc-dev at lists.ozlabs.org; devicetree at vger.kernel.org; linux-arm-
> kernel at lists.infradead.org; linux-kernel at vger.kernel.org; linux-
> clk at vger.kernel.org; linux-i2c at vger.kernel.org; iommu at lists.linux-
> foundation.org; netdev at vger.kernel.org; Greg Kroah-Hartman; Mark Rutland;
> Rob Herring; Russell King; Jochen Friedrich; Joerg Roedel; Claudiu Manoil;
> Bhupesh Sharma; Qiang Zhao; Kumar Gala; Santosh Shilimkar; Leo Li; X.B.
> Xie; M.H. Lian
> Subject: RE: [v13, 5/8] soc: fsl: add GUTS driver for QorIQ platforms
>
>
>
> > -----Original Message-----
> > From: linux-mmc-owner at vger.kernel.org [mailto:linux-mmc-
> > owner at vger.kernel.org] On Behalf Of Scott Wood
> > Sent: Friday, October 28, 2016 12:46 PM
> > To: Y.B. Lu; linux-mmc at vger.kernel.org; ulf.hansson at linaro.org; Arnd
> > Bergmann
> > Cc: linuxppc-dev at lists.ozlabs.org; devicetree at vger.kernel.org;
> > linux-arm- kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> > linux- clk at vger.kernel.org; linux-i2c at vger.kernel.org;
> > iommu at lists.linux- foundation.org; netdev at vger.kernel.org; Greg
> > Kroah-Hartman; Mark Rutland; Rob Herring; Russell King; Jochen
> > Friedrich; Joerg Roedel; Claudiu Manoil; Bhupesh Sharma; Qiang Zhao;
> Kumar Gala; Santosh Shilimkar; Leo Li; X.B.
> > Xie; M.H. Lian
> > Subject: Re: [v13, 5/8] soc: fsl: add GUTS driver for QorIQ platforms
> >
> > On Fri, 2016-10-28 at 11:32 +0800, Yangbo Lu wrote:
> > > + guts->regs = of_iomap(np, 0);
> > > + if (!guts->regs)
> > > + return -ENOMEM;
> > > +
> > > + /* Register soc device */
> > > + machine = of_flat_dt_get_machine_name();
> > > + if (machine)
> > > + soc_dev_attr.machine = devm_kstrdup(dev, machine,
> > > GFP_KERNEL);
> > > +
> > > + svr = fsl_guts_get_svr();
> > > + soc_die = fsl_soc_die_match(svr, fsl_soc_die);
> > > + if (soc_die) {
> > > + soc_dev_attr.family = devm_kasprintf(dev, GFP_KERNEL,
> > > + ?????"QorIQ %s", soc_die-
> > > >die);
> > > + } else {
> > > + soc_dev_attr.family = devm_kasprintf(dev, GFP_KERNEL,
> > > "QorIQ");
> > > + }
> > > + soc_dev_attr.soc_id = devm_kasprintf(dev, GFP_KERNEL,
> > > + ?????"svr:0x%08x", svr);
> > > + soc_dev_attr.revision = devm_kasprintf(dev, GFP_KERNEL, "%d.%d",
> > > + ???????SVR_MAJ(svr), SVR_MIN(svr));
> > > +
> > > + soc_dev = soc_device_register(&soc_dev_attr);
> > > + if (IS_ERR(soc_dev))
> > > + return PTR_ERR(soc_dev);
> >
> > ioremap leaks on this error path. ?Use devm_ioremap_resource().
> >
>
> [Lu Yangbo-B47093] Ok. I have fixed it in v14. Thanks :)
[Lu Yangbo-B47093] Sorry, used the wrong error code... Will resent it
>
> > -Scott
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-mmc"
> > in the body of a message to majordomo at vger.kernel.org More majordomo
> > info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox