* [PATCH 10/29] ARM: dts: wheat: add DU support
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the Wheat board dependent part of the DU device node.
Add the device nodes for the Analog Devices ADV7513 HDMI transmitters
connected to DU0/1. Add the necessary subnodes to interconnect DU with
HDMI transmitters/connectors.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7792-wheat.dts | 126 ++++++++++++++++++++++++++++++++++++
1 file changed, 126 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts
index 6dbb94114a93..c24f26fdab1f 100644
--- a/arch/arm/boot/dts/r8a7792-wheat.dts
+++ b/arch/arm/boot/dts/r8a7792-wheat.dts
@@ -86,6 +86,34 @@
gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ hdmi-out0 {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con0: endpoint {
+ remote-endpoint = <&adv7513_0_out>;
+ };
+ };
+ };
+
+ hdmi-out1 {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con1: endpoint {
+ remote-endpoint = <&adv7513_1_out>;
+ };
+ };
+ };
+
+ osc2_clk: osc2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
};
&extal_clk {
@@ -128,6 +156,16 @@
groups = "qspi_ctrl", "qspi_data4";
function = "qspi";
};
+
+ du0_pins: du0 {
+ groups = "du0_rgb888", "du0_sync", "du0_disp";
+ function = "du0";
+ };
+
+ du1_pins: du1 {
+ groups = "du1_rgb666", "du1_sync", "du1_disp";
+ function = "du1";
+ };
};
&scif0 {
@@ -197,3 +235,91 @@
};
};
};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ hdmi at 3d {
+ compatible = "adi,adv7513";
+ reg = <0x3d>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ adv7513_0_in: endpoint {
+ remote-endpoint = <&du_out_rgb0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ adv7513_0_out: endpoint {
+ remote-endpoint = <&hdmi_con0>;
+ };
+ };
+ };
+ };
+
+ hdmi at 39 {
+ compatible = "adi,adv7513";
+ reg = <0x39>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ adv7513_1_in: endpoint {
+ remote-endpoint = <&du_out_rgb1>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ adv7513_1_out: endpoint {
+ remote-endpoint = <&hdmi_con1>;
+ };
+ };
+ };
+ };
+};
+
+&du {
+ pinctrl-0 = <&du0_pins &du1_pins>;
+ pinctrl-names = "default";
+
+ clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>,
+ <&osc2_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0";
+ status = "okay";
+
+ ports {
+ port at 0 {
+ endpoint {
+ remote-endpoint = <&adv7513_0_in>;
+ };
+ };
+ port at 1 {
+ endpoint {
+ remote-endpoint = <&adv7513_1_in>;
+ };
+ };
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 11/29] ARM: dts: r8a7792: add MSIOF clocks
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Describe the MSIOF0/1 clocks and their parent, MP clock in the R8A7792
device tree.
Based on the original (and large) patch by Vladimir Barinov
<vladimir.barinov@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7792.dtsi | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 713141d38b3e..839cd70c4c75 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -763,6 +763,13 @@
clock-div = <48>;
clock-mult = <1>;
};
+ mp_clk: mp {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-div = <15>;
+ clock-mult = <1>;
+ };
m2_clk: m2 {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
@@ -793,6 +800,15 @@
};
/* Gate clocks */
+ mstp0_clks: mstp0_clks at e6150130 {
+ compatible = "renesas,r8a7792-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
+ clocks = <&mp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <R8A7792_CLK_MSIOF0>;
+ clock-output-names = "msiof0";
+ };
mstp1_clks: mstp1_clks at e6150134 {
compatible = "renesas,r8a7792-mstp-clocks",
"renesas,cpg-mstp-clocks";
@@ -811,12 +827,13 @@
compatible = "renesas,r8a7792-mstp-clocks",
"renesas,cpg-mstp-clocks";
reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
- clocks = <&zs_clk>, <&zs_clk>;
+ clocks = <&mp_clk>, <&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
clock-indices = <
+ R8A7792_CLK_MSIOF1
R8A7792_CLK_SYS_DMAC1 R8A7792_CLK_SYS_DMAC0
>;
- clock-output-names = "sys-dmac1", "sys-dmac0";
+ clock-output-names = "msiof1", "sys-dmac1", "sys-dmac0";
};
mstp3_clks: mstp3_clks at e615013c {
compatible = "renesas,r8a7792-mstp-clocks",
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 12/29] ARM: dts: r8a7792: add MSIOF support
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the generic R8A7792 parts of the MSIOF0/1 device nodes.
Based on the original (and large) patch by Vladimir Barinov
<vladimir.barinov@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7792.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 839cd70c4c75..a75e0cd312c5 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -26,6 +26,8 @@
i2c4 = &i2c4;
i2c5 = &i2c5;
spi0 = &qspi;
+ spi1 = &msiof0;
+ spi2 = &msiof1;
vin0 = &vin0;
vin1 = &vin1;
vin2 = &vin2;
@@ -572,6 +574,34 @@
status = "disabled";
};
+ msiof0: spi at e6e20000 {
+ compatible = "renesas,msiof-r8a7792";
+ reg = <0 0xe6e20000 0 0x0064>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks R8A7792_CLK_MSIOF0>;
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+ <&dmac1 0x51>, <&dmac1 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi at e6e10000 {
+ compatible = "renesas,msiof-r8a7792";
+ reg = <0 0xe6e10000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7792_CLK_MSIOF1>;
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+ <&dmac1 0x55>, <&dmac1 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
du: display at feb00000 {
compatible = "renesas,du-r8a7792";
reg = <0 0xfeb00000 0 0x40000>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 13/29] ARM: dts: r7s72100: add mmcif to device tree
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r7s72100.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index e18d4e645d6e..50f9f3bc109d 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -450,4 +450,16 @@
#size-cells = <0>;
status = "disabled";
};
+
+ mmcif: mmc at e804c800 {
+ compatible = "renesas,mmcif-r7s72100", "renesas,sh-mmcif";
+ reg = <0xe804c800 0x80>;
+ interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R7S72100_CLK_MMCIF>;
+ reg-io-width = <4>;
+ bus-width = <8>;
+ status = "disabled";
+ };
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 14/29] ARM: dts: r7s72100: add sdhi clock to device tree
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r7s72100.dtsi | 8 ++++++++
include/dt-bindings/clock/r7s72100-clock.h | 4 ++++
2 files changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 50f9f3bc109d..eab06701ef11 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -149,6 +149,14 @@
>;
clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4";
};
+ mstp12_clks: mstp12_clks at fcfe0444 {
+ #clock-cells = <1>;
+ compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0xfcfe0444 4>;
+ clocks = <&p1_clk>, <&p1_clk>;
+ clock-indices = <R7S72100_CLK_SDHI1 R7S72100_CLK_SDHI0>;
+ clock-output-names = "sdhi1", "sdhi0";
+ };
};
cpus {
diff --git a/include/dt-bindings/clock/r7s72100-clock.h b/include/dt-bindings/clock/r7s72100-clock.h
index 5eaf0fb469c2..29e01ed10e74 100644
--- a/include/dt-bindings/clock/r7s72100-clock.h
+++ b/include/dt-bindings/clock/r7s72100-clock.h
@@ -44,4 +44,8 @@
#define R7S72100_CLK_SPI3 4
#define R7S72100_CLK_SPI4 3
+/* MSTP12 */
+#define R7S72100_CLK_SDHI0 3
+#define R7S72100_CLK_SDHI1 2
+
#endif /* __DT_BINDINGS_CLOCK_R7S72100_H__ */
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 15/29] ARM: dts: gose: use generic pinctrl properties in SDHI nodes
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 90af18600124..dc311eba4444 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -346,18 +346,18 @@
};
sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
- renesas,function = "sdhi0";
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
};
sdhi1_pins: sd1 {
- renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
- renesas,function = "sdhi1";
+ groups = "sdhi1_data4", "sdhi1_ctrl";
+ function = "sdhi1";
};
sdhi2_pins: sd2 {
- renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
- renesas,function = "sdhi2";
+ groups = "sdhi2_data4", "sdhi2_ctrl";
+ function = "sdhi2";
};
qspi_pins: qspi {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 16/29] ARM: dts: r8a7794: Fix W=1 dtc warnings
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be>
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,dvc/dvc at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,dvc/dvc at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,mix/mix at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,mix/mix at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ctu/ctu at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,src/src at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 8 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound at ec500000/rcar_sound,ssi/ssi at 9 has a unit name, but no reg property
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 58 +++++++++++++++++++++---------------------
1 file changed, 29 insertions(+), 29 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 8cfc1385f58a..44ce62938417 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1491,62 +1491,62 @@
status = "disabled";
rcar_sound,dvc {
- dvc0: dvc at 0 {
+ dvc0: dvc-0 {
dmas = <&audma0 0xbc>;
dma-names = "tx";
};
- dvc1: dvc at 1 {
+ dvc1: dvc-1 {
dmas = <&audma0 0xbe>;
dma-names = "tx";
};
};
rcar_sound,mix {
- mix0: mix at 0 { };
- mix1: mix at 1 { };
+ mix0: mix-0 { };
+ mix1: mix-1 { };
};
rcar_sound,ctu {
- ctu00: ctu at 0 { };
- ctu01: ctu at 1 { };
- ctu02: ctu at 2 { };
- ctu03: ctu at 3 { };
- ctu10: ctu at 4 { };
- ctu11: ctu at 5 { };
- ctu12: ctu at 6 { };
- ctu13: ctu at 7 { };
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
};
rcar_sound,src {
- src at 0 {
+ src-0 {
status = "disabled";
};
- src1: src at 1 {
+ src1: src-1 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x87>, <&audma0 0x9c>;
dma-names = "rx", "tx";
};
- src2: src at 2 {
+ src2: src-2 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x89>, <&audma0 0x9e>;
dma-names = "rx", "tx";
};
- src3: src at 3 {
+ src3: src-3 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8b>, <&audma0 0xa0>;
dma-names = "rx", "tx";
};
- src4: src at 4 {
+ src4: src-4 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8d>, <&audma0 0xb0>;
dma-names = "rx", "tx";
};
- src5: src at 5 {
+ src5: src-5 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8f>, <&audma0 0xb2>;
dma-names = "rx", "tx";
};
- src6: src at 6 {
+ src6: src-6 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x91>, <&audma0 0xb4>;
dma-names = "rx", "tx";
@@ -1554,61 +1554,61 @@
};
rcar_sound,ssi {
- ssi0: ssi at 0 {
+ ssi0: ssi-0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x01>, <&audma0 0x02>,
<&audma0 0x15>, <&audma0 0x16>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi1: ssi at 1 {
+ ssi1: ssi-1 {
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma0 0x04>,
<&audma0 0x49>, <&audma0 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi2: ssi at 2 {
+ ssi2: ssi-2 {
interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x05>, <&audma0 0x06>,
<&audma0 0x63>, <&audma0 0x64>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi3: ssi at 3 {
+ ssi3: ssi-3 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x07>, <&audma0 0x08>,
<&audma0 0x6f>, <&audma0 0x70>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi4: ssi at 4 {
+ ssi4: ssi-4 {
interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x09>, <&audma0 0x0a>,
<&audma0 0x71>, <&audma0 0x72>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi5: ssi at 5 {
+ ssi5: ssi-5 {
interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0b>, <&audma0 0x0c>,
<&audma0 0x73>, <&audma0 0x74>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi6: ssi at 6 {
+ ssi6: ssi-6 {
interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0d>, <&audma0 0x0e>,
<&audma0 0x75>, <&audma0 0x76>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi7: ssi at 7 {
+ ssi7: ssi-7 {
interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0f>, <&audma0 0x10>,
<&audma0 0x79>, <&audma0 0x7a>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi8: ssi at 8 {
+ ssi8: ssi-8 {
interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x11>, <&audma0 0x12>,
<&audma0 0x7b>, <&audma0 0x7c>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi9: ssi at 9 {
+ ssi9: ssi-9 {
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x13>, <&audma0 0x14>,
<&audma0 0x7d>, <&audma0 0x7e>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 17/29] ARM: dts: r7s72100: add sdhi to device tree
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r7s72100.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index eab06701ef11..3dd427d68c83 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -470,4 +470,30 @@
bus-width = <8>;
status = "disabled";
};
+
+ sdhi0: sd at e804e000 {
+ compatible = "renesas,sdhi-r7s72100";
+ reg = <0xe804e000 0x100>;
+ interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&mstp12_clks R7S72100_CLK_SDHI0>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ status = "disabled";
+ };
+
+ sdhi1: sd at e804e800 {
+ compatible = "renesas,sdhi-r7s72100";
+ reg = <0xe804e800 0x100>;
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&mstp12_clks R7S72100_CLK_SDHI1>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ status = "disabled";
+ };
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 18/29] ARM: dts: rskrza1: add sdhi1 DT support
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r7s72100-rskrza1.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index e5dea5bb4032..dd4418195ca6 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -56,6 +56,11 @@
};
};
+&sdhi1 {
+ bus-width = <4>;
+ status = "okay";
+};
+
&scif2 {
status = "okay";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 19/29] ARM: dts: lager: Add entries for VIN HDMI input support
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: William Towle <william.towle@codethink.co.uk>
Add DT entries for vin0, vin0_pins, and adv7612.
Sets the 'default-input' property for ADV7612, enabling image and video
capture without the need to have userspace specifying routing.
Signed-off-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk>
[uli: added interrupt, renamed endpoint, merged default-input]
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790-lager.dts | 66 +++++++++++++++++++++++++++++++++++--
1 file changed, 64 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 52b56fcaddf2..434268262d88 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -231,12 +231,23 @@
};
};
+ hdmi-in {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&adv7612_in>;
+ };
+ };
+ };
+
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
- hdmi_con: endpoint {
+ hdmi_con_out: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
@@ -427,6 +438,11 @@
function = "usb2";
};
+ vin0_pins: vin0 {
+ groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+ function = "vin0";
+ };
+
vin1_pins: vin1 {
groups = "vin1_data8", "vin1_clk";
function = "vin1";
@@ -646,7 +662,34 @@
port at 1 {
reg = <1>;
adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con>;
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
+ hdmi-in at 4c {
+ compatible = "adi,adv7612";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ default-input = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ adv7612_in: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+
+ port at 2 {
+ reg = <2>;
+ adv7612_out: endpoint {
+ remote-endpoint = <&vin0ep2>;
};
};
};
@@ -722,6 +765,25 @@
status = "okay";
};
+/* HDMI video input */
+&vin0 {
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ port {
+ vin0ep2: endpoint {
+ remote-endpoint = <&adv7612_out>;
+ bus-width = <24>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ data-active = <1>;
+ };
+ };
+};
+
/* composite video input */
&vin1 {
pinctrl-0 = <&vin1_pins>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 20/29] ARM: dts: koelsch: add HDMI input
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Hans Verkuil <hverkuil@xs4all.nl>
Add support in the dts for the HDMI input. Based on the Lager dts
patch from Ulrich Hecht.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[uli: removed "renesas," prefixes from pfc nodes]
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 68 +++++++++++++++++++++++++++++++++--
1 file changed, 66 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index f17bfa000f73..c457b43deb7d 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -265,12 +265,23 @@
};
};
+ hdmi-in {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&adv7612_in>;
+ };
+ };
+ };
+
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
- hdmi_con: endpoint {
+ hdmi_con_out: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
@@ -414,6 +425,11 @@
function = "usb1";
};
+ vin0_pins: vin0 {
+ groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+ function = "vin0";
+ };
+
vin1_pins: vin1 {
groups = "vin1_data8", "vin1_clk";
function = "vin1";
@@ -617,7 +633,34 @@
port at 1 {
reg = <1>;
adv7511_out: endpoint {
- remote-endpoint = <&hdmi_con>;
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
+ hdmi-in at 4c {
+ compatible = "adi,adv7612";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ default-input = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ adv7612_in: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+
+ port at 2 {
+ reg = <2>;
+ adv7612_out: endpoint {
+ remote-endpoint = <&vin0ep2>;
};
};
};
@@ -699,6 +742,27 @@
cpu0-supply = <&vdd_dvfs>;
};
+/* HDMI video input */
+&vin0 {
+ status = "okay";
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin0ep2: endpoint {
+ remote-endpoint = <&adv7612_out>;
+ bus-width = <24>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ data-active = <1>;
+ };
+ };
+};
+
/* composite video input */
&vin1 {
status = "okay";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 21/29] ARM: dts: r8a7793: Enable VIN0-VIN2
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index a7d11b9f3555..629d3d60d1cd 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -852,6 +852,33 @@
status = "disabled";
};
+ vin0: video at e6ef0000 {
+ compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7793_CLK_VIN0>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ vin1: video at e6ef1000 {
+ compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7793_CLK_VIN1>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ vin2: video at e6ef2000 {
+ compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin";
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7793_CLK_VIN2>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
qspi: spi at e6b10000 {
compatible = "renesas,qspi-r8a7793", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 22/29] ARM: dts: r8a7779: Fix DU reg property
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The system uses one address cell and one size cell, not two. Fix the DU
DT node.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index b9bbcce69dfb..9d5b8fa3da8b 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -420,7 +420,7 @@
du: display at fff80000 {
compatible = "renesas,du-r8a7779";
- reg = <0 0xfff80000 0 0x40000>;
+ reg = <0xfff80000 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_DU>;
power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 23/29] ARM: dts: emev2: Remove skeleton.dtsi inclusion
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be>
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi
as deprecated"), including skeleton.dtsi is deprecated.
This fixes the following warning with W=1:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/emev2.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index cd119400f440..0124faf175c8 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -8,13 +8,14 @@
* kind, whether express or implied.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "renesas,emev2";
interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
aliases {
gpio0 = &gpio0;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 24/29] ARM: dts: r8a7778: Remove skeleton.dtsi inclusion
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be>
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi
as deprecated"), including skeleton.dtsi is deprecated.
This fixes the following warning with W=1:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index e571d66ea0fe..f3ffe1d31544 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -14,8 +14,6 @@
* kind, whether express or implied.
*/
-/include/ "skeleton.dtsi"
-
#include <dt-bindings/clock/r8a7778-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -23,6 +21,8 @@
/ {
compatible = "renesas,r8a7778";
interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
cpus {
#address-cells = <1>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 25/29] ARM: dts: r8a7779: Remove skeleton.dtsi inclusion
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be>
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi
as deprecated"), including skeleton.dtsi is deprecated.
This fixes the following warning with W=1:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 9d5b8fa3da8b..3005308a1807 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -9,8 +9,6 @@
* kind, whether express or implied.
*/
-/include/ "skeleton.dtsi"
-
#include <dt-bindings/clock/r8a7779-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -19,6 +17,8 @@
/ {
compatible = "renesas,r8a7779";
interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
cpus {
#address-cells = <1>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 26/29] ARM: dts: r8a7740: Remove skeleton.dtsi inclusion
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be>
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi
as deprecated"), including skeleton.dtsi is deprecated.
This fixes the following warning with W=1:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 159e04eb1b9e..34159a8349de 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -8,8 +8,6 @@
* kind, whether express or implied.
*/
-/include/ "skeleton.dtsi"
-
#include <dt-bindings/clock/r8a7740-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -17,6 +15,8 @@
/ {
compatible = "renesas,r8a7740";
interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
cpus {
#address-cells = <1>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 27/29] ARM: dts: sh73a0: Remove skeleton.dtsi inclusion
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be>
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi
as deprecated"), including skeleton.dtsi is deprecated.
This fixes the following warning with W=1:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 032fe2f14b16..e1267590b575 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -8,8 +8,6 @@
* kind, whether express or implied.
*/
-/include/ "skeleton.dtsi"
-
#include <dt-bindings/clock/sh73a0-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -17,6 +15,8 @@
/ {
compatible = "renesas,sh73a0";
interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
cpus {
#address-cells = <1>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [GIT PULL] Renesas ARM Based SoC DT Updates for v4.10
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these Renesas ARM based SoC DT updates for v4.10.
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.10
for you to fetch changes up to 68cc085a4daaa32f7138de1e918331c05165a484:
ARM: dts: r8a7794: remove Z clock (2016-11-04 10:36:47 +0100)
----------------------------------------------------------------
Renesas ARM Based SoC DT Updates for v4.10
Clean-Ups and Corrections:
* Removed Z clock from r8a7794 SoC; it is not present in hardware
* Use generic pinctrl properties in SDHI nodes in gose board
* Correct W=1 dtc warnings on r8a7794 SoC
* Correct DU reg property on r8a7779 SoC
* Correct SCIFB reg properties to cover all registers
Enhancements:
* Configure pinmuxing for the DU0 input clock on the Marzen board
* Enable VIN 0 - 2 on r8a7793 SoC
* Enable HDMI input on Koelsch and Lager boards
* Enable SDHI1 on rskrza1 board
* Add MMCIF nodes to r7s72100 SoC
* Add MSIOF clocks to r8a7792 SoC
* Enable UHS for SDHI 0 & 1 on koelsch and alt boards
----------------------------------------------------------------
Chris Brandt (5):
ARM: dts: r7s72100: add mmcif clock to device tree
ARM: dts: r7s72100: add mmcif to device tree
ARM: dts: r7s72100: add sdhi clock to device tree
ARM: dts: r7s72100: add sdhi to device tree
ARM: dts: rskrza1: add sdhi1 DT support
Geert Uytterhoeven (10):
ARM: dts: r8a7790: Correct SCIFB reg properties to cover all registers
ARM: dts: r8a7791: Correct SCIFB reg properties to cover all registers
ARM: dts: r8a7793: Correct SCIFB reg properties to cover all registers
ARM: dts: r8a7794: Correct SCIFB reg properties to cover all registers
ARM: dts: r8a7794: Fix W=1 dtc warnings
ARM: dts: emev2: Remove skeleton.dtsi inclusion
ARM: dts: r8a7778: Remove skeleton.dtsi inclusion
ARM: dts: r8a7779: Remove skeleton.dtsi inclusion
ARM: dts: r8a7740: Remove skeleton.dtsi inclusion
ARM: dts: sh73a0: Remove skeleton.dtsi inclusion
Hans Verkuil (1):
ARM: dts: koelsch: add HDMI input
Laurent Pinchart (2):
ARM: dts: r8a7779: Fix DU reg property
ARM: dts: r8a7779: marzen: Configure pinmuxing for the DU0 input clock
Sergei Shtylyov (4):
ARM: dts: wheat: add DU support
ARM: dts: r8a7792: add MSIOF clocks
ARM: dts: r8a7792: add MSIOF support
ARM: dts: r8a7794: remove Z clock
Simon Horman (5):
ARM: dts: r8a7791: set maximum frequency for SDHI clocks
ARM: dts: koelsch: enable UHS for SDHI 0, 1 & 3
ARM: dts: r8a7794: set maximum frequency for SDHI clocks
ARM: dts: alt: enable UHS for SDHI 0 & 1
ARM: dts: gose: use generic pinctrl properties in SDHI nodes
Ulrich Hecht (1):
ARM: dts: r8a7793: Enable VIN0-VIN2
William Towle (1):
ARM: dts: lager: Add entries for VIN HDMI input support
arch/arm/boot/dts/emev2.dtsi | 3 +-
arch/arm/boot/dts/r7s72100-rskrza1.dts | 5 ++
arch/arm/boot/dts/r7s72100.dtsi | 55 +++++++++++++
arch/arm/boot/dts/r8a7740.dtsi | 4 +-
arch/arm/boot/dts/r8a7778.dtsi | 4 +-
arch/arm/boot/dts/r8a7779-marzen.dts | 2 +-
arch/arm/boot/dts/r8a7779.dtsi | 6 +-
arch/arm/boot/dts/r8a7790-lager.dts | 66 ++++++++++++++-
arch/arm/boot/dts/r8a7790.dtsi | 6 +-
arch/arm/boot/dts/r8a7791-koelsch.dts | 101 +++++++++++++++++++++--
arch/arm/boot/dts/r8a7791.dtsi | 9 ++-
arch/arm/boot/dts/r8a7792-wheat.dts | 126 +++++++++++++++++++++++++++++
arch/arm/boot/dts/r8a7792.dtsi | 51 +++++++++++-
arch/arm/boot/dts/r8a7793-gose.dts | 12 +--
arch/arm/boot/dts/r8a7793.dtsi | 33 +++++++-
arch/arm/boot/dts/r8a7794-alt.dts | 22 ++++-
arch/arm/boot/dts/r8a7794.dtsi | 70 ++++++++--------
arch/arm/boot/dts/sh73a0.dtsi | 4 +-
include/dt-bindings/clock/r7s72100-clock.h | 7 ++
include/dt-bindings/clock/r8a7794-clock.h | 3 +-
20 files changed, 516 insertions(+), 73 deletions(-)
^ permalink raw reply
* [PATCH 28/29] ARM: dts: r8a7779: marzen: Configure pinmuxing for the DU0 input clock
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
DU0 uses an externally provided clock, but the corresponding pin isn't
correctly muxed. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779-marzen.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index 541678df90a9..676151b70185 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -170,7 +170,7 @@
du_pins: du {
du0 {
- groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
+ groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0", "du0_clk_in";
function = "du0";
};
du1 {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 29/29] ARM: dts: r8a7794: remove Z clock
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478252308.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
R8A7794 doesn't have Cortex-A15 CPUs, thus there's no Z clock...
Fixes: 0dce5454d5c2 ("ARM: shmobile: Initial r8a7794 SoC device tree")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 3 +--
include/dt-bindings/clock/r8a7794-clock.h | 3 +--
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 44ce62938417..01816ac775a8 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1028,8 +1028,7 @@
clocks = <&extal_clk &usb_extal_clk>;
#clock-cells = <1>;
clock-output-names = "main", "pll0", "pll1", "pll3",
- "lb", "qspi", "sdh", "sd0", "z",
- "rcan";
+ "lb", "qspi", "sdh", "sd0", "rcan";
#power-domain-cells = <0>;
};
/* Variable factor clocks */
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index 9d02f5317c7c..88e64846cf37 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -20,8 +20,7 @@
#define R8A7794_CLK_QSPI 5
#define R8A7794_CLK_SDH 6
#define R8A7794_CLK_SD0 7
-#define R8A7794_CLK_Z 8
-#define R8A7794_CLK_RCAN 9
+#define R8A7794_CLK_RCAN 8
/* MSTP0 */
#define R8A7794_CLK_MSIOF0 0
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 1/9] ARM: shmobile: Sort Kconfig selections
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478251657.git.horms+renesas@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be>
Sort alphabetically all symbols selected by ARCH_RENESAS
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/mach-shmobile/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 09817bae4558..84fd4e959147 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -32,15 +32,15 @@ config ARCH_RMOBILE
menuconfig ARCH_RENESAS
bool "Renesas ARM SoCs"
depends on ARCH_MULTI_V7 && MMU
+ select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_SHMOBILE
select ARCH_SHMOBILE_MULTI
+ select ARM_GIC
+ select GPIOLIB
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select ARM_GIC
- select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select NO_IOPORT_MAP
select PINCTRL
- select GPIOLIB
select ZONE_DMA if ARM_LPAE
if ARCH_RENESAS
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 2/9] ARM: shmobile: only call rcar_gen2_clocks_init() if present
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478251657.git.horms+renesas@verge.net.au>
From: Simon Horman <horms@verge.net.au>
The RZ/G1M (r8a7743) uses the R-Car Gen2 core, but not the R-Car Gen2 clock
driver. This is a harbinger of a transition for R-Car Gen2 SoCs. As the
process to get all the required pieces in place is somewhat complex it
seems useful to try to disentangle dependencies where possible.
The approach here is to temporarily disable calling rcar_gen2_clocks_init()
if no R-Car Gen2 SoC are configured and thus the symbol will not be
present.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/mach-shmobile/setup-rcar-gen2.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index afb9fdcd3d90..154e8051825a 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -15,6 +15,7 @@
* GNU General Public License for more details.
*/
+#include <linux/clk-provider.h>
#include <linux/clk/renesas.h>
#include <linux/clocksource.h>
#include <linux/device.h>
@@ -130,7 +131,15 @@ void __init rcar_gen2_timer_init(void)
iounmap(base);
#endif /* CONFIG_ARM_ARCH_TIMER */
- rcar_gen2_clocks_init(mode);
+ if (IS_ENABLED(CONFIG_ARCH_R8A7790) ||
+ IS_ENABLED(CONFIG_ARCH_R8A7791) ||
+ IS_ENABLED(CONFIG_ARCH_R8A7792) ||
+ IS_ENABLED(CONFIG_ARCH_R8A7793) ||
+ IS_ENABLED(CONFIG_ARCH_R8A7794))
+ rcar_gen2_clocks_init(mode);
+ else
+ of_clk_init(NULL);
+
clocksource_probe();
}
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 3/9] ARM: shmobile: r8a7743: basic SoC support
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478251657.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Add minimal support for the RZ/G1M (R8A7743) SoC.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++
arch/arm/mach-shmobile/Kconfig | 4 +++
arch/arm/mach-shmobile/Makefile | 1 +
arch/arm/mach-shmobile/setup-r8a7743.c | 34 ++++++++++++++++++++++
4 files changed, 41 insertions(+)
create mode 100644 arch/arm/mach-shmobile/setup-r8a7743.c
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 2f0b7169f132..058be8180bc4 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -13,6 +13,8 @@ SoCs:
compatible = "renesas,r8a73a4"
- R-Mobile A1 (R8A77400)
compatible = "renesas,r8a7740"
+ - RZ/G1M (R8A77430)
+ compatible = "renesas,r8a7743"
- R-Car M1A (R8A77781)
compatible = "renesas,r8a7778"
- R-Car H1 (R8A77790)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 84fd4e959147..c48be1d332ed 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -67,6 +67,10 @@ config ARCH_R8A7740
select ARCH_RMOBILE
select RENESAS_INTC_IRQPIN
+config ARCH_R8A7743
+ bool "RZ/G1M (R8A77430)"
+ select ARCH_RCAR_GEN2
+
config ARCH_R8A7778
bool "R-Car M1A (R8A77781)"
select ARCH_RCAR_GEN1
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 3fc48b02eb4f..332b84f8261f 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -9,6 +9,7 @@ obj-y := timer.o
obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7743) += setup-r8a7743.o
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
diff --git a/arch/arm/mach-shmobile/setup-r8a7743.c b/arch/arm/mach-shmobile/setup-r8a7743.c
new file mode 100644
index 000000000000..a7ecb82d219f
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-r8a7743.c
@@ -0,0 +1,34 @@
+/*
+ * r8a7743 processor support
+ *
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation; of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach/arch.h>
+
+#include "common.h"
+#include "rcar-gen2.h"
+
+static const char * const r8a7743_boards_compat_dt[] __initconst = {
+ "renesas,r8a7743",
+ NULL,
+};
+
+DT_MACHINE_START(R8A7743_DT, "Generic R8A7743 (Flattened Device Tree)")
+ .init_early = shmobile_init_delay,
+ .init_time = rcar_gen2_timer_init,
+ .init_late = shmobile_init_late,
+ .reserve = rcar_gen2_reserve,
+ .dt_compat = r8a7743_boards_compat_dt,
+MACHINE_END
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 4/9] ARM: shmobile: document SK-RZG1M board
From: Simon Horman @ 2016-11-04 9:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1478251657.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Document the SK-RZG1M device tree bindings, listing it as a supported board.
This allows to use checkpatch.pl to validate .dts files referring to the
SK-RZG1M board.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 058be8180bc4..785d1f847acb 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -75,5 +75,7 @@ Boards:
compatible = "renesas,salvator-x", "renesas,r8a7796";
- SILK (RTP0RC7794LCB00011S)
compatible = "renesas,silk", "renesas,r8a7794"
+ - SK-RZG1M (YR8A77430S000BE)
+ compatible = "renesas,sk-rzg1m", "renesas,r8a7743"
- Wheat
compatible = "renesas,wheat", "renesas,r8a7792"
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox