* ACPI namespace details for ARM64
From: Lorenzo Pieralisi @ 2016-11-11 11:28 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109220506.GN14322@bhelgaas-glaptop.roam.corp.google.com>
On Wed, Nov 09, 2016 at 04:05:06PM -0600, Bjorn Helgaas wrote:
[...]
> ACPI defined a Producer/Consumer bit that was intended to distinguish
> the bridge apertures from the bridge registers [4, 5]. However, BIOSes
> didn't use that bit correctly, and the result is that OSes have to
> assume that everything in a PCI host bridge _CRS is a window. That
> leaves no way to describe the bridge registers in the PNP0A03/PNP0A08
> device itself.
ACPI 6.1 states that in the revision changes 4.0a Apr.2010 (xiii)
"Consumer/Producer bit is ignored (Restored 2.0C change that had
been lost)" and still that bit is marked as valid. If it is not
reliable it should be set as "ignored" in the specs (as it was
on ACPI 2.0C, BTW), as it is it is just a source of confusion.
Thanks again !
Lorenzo
^ permalink raw reply
* [RFC v2 8/8] iommu/arm-smmu: implement add_reserved_regions callback
From: Joerg Roedel @ 2016-11-11 11:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <f4537e43-0237-e478-eacd-b107458628b8@redhat.com>
On Thu, Nov 10, 2016 at 07:00:52PM +0100, Auger Eric wrote:
> GICv2m and GICV3 ITS use dma-mapping iommu_dma_map_msi_msg to allocate
> an MSI IOVA on-demand.
Yes, and it the right thing to do there because as a DMA-API
implementation the dma-iommu code cares about the address space
allocation.
As I understand it this is different in your case, as someone else is
defining the address space layout. So why do you need to allocate it
yourself?
Joerg
^ permalink raw reply
* [PATCH v7] soc: qcom: add l2 cache perf events driver
From: Mark Rutland @ 2016-11-11 11:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <50feb4f2-f042-5f75-732e-5a99653b51f2@codeaurora.org>
On Thu, Nov 10, 2016 at 06:25:47PM -0500, Leeder, Neil wrote:
> On 11/9/2016 12:54 PM, Mark Rutland wrote:
> >>+
> >>+/*
> >>+ * The cache is made up of one or more clusters, each cluster has its own PMU.
> >>+ * Each cluster is associated with one or more CPUs.
> >>+ * This structure represents one of the hardware PMUs.
> >>+ *
> >>+ * Events can be envisioned as a 2-dimensional array. Each column represents
> >>+ * a group of events. There are 8 groups. Only one entry from each
> >>+ * group can be in use at a time. When an event is assigned a counter
> >>+ * by *_event_add(), the counter index is assigned to group_to_counter[group].
> >
> >If I've followed correctly, this means each group has a dedicated
> >counter?
> >
> >I take it groups are not symmetric (i.e. each column has different
> >events)? Or does each column contain the same events?
> >
> >Is there any overlap?
>
> Each group will have at most one counter, but it's not dedicated.
> There's no requirement that an implementation have as many counters
> as there are groups, so an event can be assigned to any available
> counter.
>
> Every entry in the 2-dimensional array is unique, so no duplicates.
> Once you have used an event, you cannot use any other event from its
> column.
Ok; thanks for clarifying that!
> >>+static int l2_cache__event_init(struct perf_event *event)
> >>+ /* Don't allow groups with mixed PMUs, except for s/w events */
> >>+ if (event->group_leader->pmu != event->pmu &&
> >>+ !is_software_event(event->group_leader)) {
> >>+ dev_warn(&l2cache_pmu->pdev->dev,
> >>+ "Can't create mixed PMU group\n");
> >>+ return -EINVAL;
> >>+ }
> >>+
> >>+ list_for_each_entry(sibling, &event->group_leader->sibling_list,
> >>+ group_entry)
> >>+ if (sibling->pmu != event->pmu &&
> >>+ !is_software_event(sibling)) {
> >>+ dev_warn(&l2cache_pmu->pdev->dev,
> >>+ "Can't create mixed PMU group\n");
> >>+ return -EINVAL;
> >>+ }
> >>+
> >>+ /* Ensure all events in a group are on the same cpu */
> >>+ cluster = get_hml2_pmu(event->cpu);
> >>+ if ((event->group_leader != event) &&
> >>+ (cluster->on_cpu != event->group_leader->cpu)) {
> >>+ dev_warn(&l2cache_pmu->pdev->dev,
> >>+ "Can't create group on CPUs %d and %d",
> >>+ event->cpu, event->group_leader->cpu);
> >>+ return -EINVAL;
> >>+ }
> >
> >It's probably worth also checking that the events are co-schedulable
> >(e.g. they don't conflict column-wise).
>
> That's what filter_match() is doing - stopping column-conflicting
> events from even getting to init(). In init() we don't have a record
> of which other events are being co-scheduled. We could keep a list
> of groups used by other events to compare against, but because
> there's no matching term() function there's no obvious way of
> removing them from the list.
I mean within the group, in addition to the filter_match() logic.
When you event_init() an event, you can determine whether there is any
column conflict within the group the new events is being placed in, and
whether you have sufficient counters to ever be able to schedule that
group. If not, the group should be rejected.
Other PMUs have similar checks; see l2x0_pmu_group_is_valid() in
arch/arm/mm/cache-l2x0-pmu.c, and valiate_group() in
drivers/perf/arm_pmu.c.
I don't believe that filer_match() can catch that, as it's called on
each event in a group individually prior to add() time, and thus there's
no visibility of the group as a whole.
Regardless, we can and should catch that case far earlier.
[...]
> >>+ if (acpi_bus_get_device(ACPI_HANDLE(dev), &device))
> >>+ return -ENODEV;
> >>+
> >>+ if (kstrtol(device->pnp.unique_id, 10, &fw_cluster_id) < 0) {
> >>+ dev_err(&pdev->dev, "unable to read ACPI uid\n");
> >>+ return -ENODEV;
> >>+ }
> >
> >>+ cluster->l2cache_pmu = l2cache_pmu;
> >>+ for_each_present_cpu(cpu) {
> >>+ if (topology_physical_package_id(cpu) == fw_cluster_id) {
> >>+ cpumask_set_cpu(cpu, &cluster->cluster_cpus);
> >>+ per_cpu(pmu_cluster, cpu) = cluster;
> >>+ }
> >>+ }
> >
> >I'm still uneasy about this.
> >
> >The topology_* API doesn't have a well-defined mapping to the MPIDR.Aff*
> >levels, which itself also don't have a well-defined mapping to your
> >hardware's clusters (and therefore fw_cluster_id).
> >
> >Thus, I'm rather worried that this is going to get broken easily, either
> >by changes in the kernel, or in future HW revisions where the mapping of
> >clusters to MPIDR.Aff* fields changes.
>
> I'm not sure how else to get a mapping of CPU to cluster which
> doesn't eventually end with MPIDR.
This is unfortunate. :(
It would have been much nicer if the FW also provided the MPIDR.Aff<n>
level to match up to, as that would be unambiguous.
> This is the definition of topology_physical_package_id() from
> asm/topology.h:
>
> #define topology_physical_package_id(cpu)
> (cpu_topology[cpu].cluster_id)
>
> It seems to be a pretty solid connection between cpu and cluster.
As I mentioned above, there's no well-defined mapping from MPIDR.Aff* to
the topology API levels. The "cluster_id" here is a guess, and one that
might change in future based on other heuristics.
> I don't think this is an abuse of this function. Unless there is some
> other way of getting this mapping I'd suggest using this, and if some
> future chip should change MPIDR usage it can be addressed it then.
I don't think it's an abuse, as such, but I don't think that it is
reliable.
That said, I don't see that we can do any better, as you say.
It's probably worth adding a comment block regarding our expectations,
i.e. that cluster_id means Aff1 for CPUs without multi-threading, Aff2
otherwise, and that we hope future systems don't choose another
MPIDR.Aff* mapping scheme.
Thanks,
Mark.
^ permalink raw reply
* [PATCH] PM / Domains: Fix compatible for domain idle state
From: Ulf Hansson @ 2016-11-11 11:52 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161110195832.4nz7lxlmshaemcbb@rob-hp-laptop>
On 10 November 2016 at 20:58, Rob Herring <robh@kernel.org> wrote:
>
> On Mon, Nov 07, 2016 at 12:14:28PM +0100, Ulf Hansson wrote:
> > On 3 November 2016 at 22:54, Lina Iyer <lina.iyer@linaro.org> wrote:
> > > Re-using idle state definition provided by arm,idle-state for domain
> > > idle states creates a lot of confusion and limits further evolution of
> > > the domain idle definition. To keep things clear and simple, define a
> > > idle states for domain using a new compatible "domain-idle-state".
> > >
> > > Fix existing PM domains code to look for the newly defined compatible.
> > >
> > > Cc: <devicetree@vger.kernel.org>
> > > Cc: Rob Herring <robh@kernel.org>
> > > Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
> > > ---
> > > .../bindings/power/domain-idle-state.txt | 33 ++++++++++++++++++++++
> > > .../devicetree/bindings/power/power_domain.txt | 8 +++---
> > > drivers/base/power/domain.c | 2 +-
> > > 3 files changed, 38 insertions(+), 5 deletions(-)
> > > create mode 100644 Documentation/devicetree/bindings/power/domain-idle-state.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.txt b/Documentation/devicetree/bindings/power/domain-idle-state.txt
> > > new file mode 100644
> > > index 0000000..eefc7ed
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/power/domain-idle-state.txt
> > > @@ -0,0 +1,33 @@
> > > +PM Domain Idle State Node:
> > > +
> > > +A domain idle state node represents the state parameters that will be used to
> > > +select the state when there are no active components in the domain.
> > > +
> > > +The state node has the following parameters -
> > > +
> > > +- compatible:
> > > + Usage: Required
> > > + Value type: <string>
> > > + Definition: Must be "domain-idle-state".
> > > +
> > > +- entry-latency-us
> > > + Usage: Required
> > > + Value type: <prop-encoded-array>
> > > + Definition: u32 value representing worst case latency in
> > > + microseconds required to enter the idle state.
> > > + The exit-latency-us duration may be guaranteed
> > > + only after entry-latency-us has passed.
> >
> > As we anyway are going to change this, why not use an u64 and have the
> > value in ns instead of us?
>
> I can't imagine that you would need more resolution or range. For times
> less than 1us, s/w and register access times are going to dominate the
> time.
Yep.
>
>
> Unless there is a real need, I'd keep alignment with the existing
> binding.
Agree!
Kind regards
Uffe
^ permalink raw reply
* [RESEND PATCH v1 02/11] dt-bindings: hisi: Add Hisilicon HiP05/06/07 Sysctrl and Djtag dts bindings
From: Mark Rutland @ 2016-11-11 11:53 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <5825A927.2000202@gmail.com>
On Fri, Nov 11, 2016 at 04:49:03PM +0530, Anurup M wrote:
> On Thursday 10 November 2016 10:53 PM, Mark Rutland wrote:
> >On Thu, Nov 03, 2016 at 01:41:58AM -0400, Anurup M wrote:
> >>diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
> >>+Example:
> >>+ /* for Hisilicon HiP05 djtag for CPU sysctrl */
> >>+ djtag0: djtag at 80010000 {
> >>+ compatible = "hisilicon,hip05-cpu-djtag-v1";
> >>+ reg = <0x0 0x80010000 0x0 0x10000>;
> >>+
> >>+ /* For L3 cache PMU */
> >>+ pmul3c0 {
> >>+ compatible = "hisilicon,hisi-pmu-l3c-v1";
> >>+ scl-id = <0x02>;
> >>+ num-events = <0x16>;
> >>+ num-counters = <0x08>;
> >>+ module-id = <0x04>;
> >>+ num-banks = <0x04>;
> >>+ cfgen-map = <0x02 0x04 0x01 0x08>;
> >>+ counter-reg = <0x170>;
> >>+ evctrl-reg = <0x04>;
> >>+ event-en = <0x1000000>;
> >>+ evtype-reg = <0x140>;
> >>+ };
> >This sub-node needs a binding document.
> >
> >These properties are completely opaque
> The L3 cache PMU bindings are defined @bindings/arm/hisilicon/pmu.txt.
> Is it OK that I document here(hisilicon/djtag.txt), a reference to
> the PMU bindings doc ?
At this point in the series, that file does not exist yet, and this is
an undocumented beinding.
Please introduce this sub-node long with the PMU bindings, later in the
series.
Thanks,
Mark.
^ permalink raw reply
* [PATCH v9 00/10] MT2701 DRM support
From: YT Shen @ 2016-11-11 11:55 UTC (permalink / raw)
To: linux-arm-kernel
This is MT2701 DRM support PATCH v9, based on 4.9-rc1.
We add DSI interrupt control, transfer function for MIPI DSI panel support.
Most codes are the same, except some register changed.
For example:
- DISP_OVL address offset changed, color format definition changed.
- DISP_RDMA fifo size changed.
- DISP_COLOR offset changed.
- MIPI_TX setting changed.
We add a new component DDP_COMPONENT_BLS, and the connections are updated.
OVL -> RDMA -> COLOR -> BLS -> DSI
RDMA -> DPI
And we have shadow register support in MT2701.
We remove dts patch from the patch series, which depends on MT2701 CCF and scpsys.
Changes since v8:
- enable 3 DSI interrupts only
- move mtk_dsi_wait_for_irq_done() to the patch of irq control
- use the name BLS in DRM driver part
- move BLS declaration to a separate patch
- update mtk_dsi_switch_to_cmd_mode()
- update mtk_output_dsi_enable() and mtk_output_dsi_disable()
Changes since v7:
- Remove redundant codes
- Move the definition of DDP_COMPONENT_BLS to patch of "drm/mediatek: update display module connections"
- Move _dsi_irq_wait_queue into platform driver data
- Move mtk_dsi_irq_data_clear() to patch of "drm/mediatek: add dsi interrupt control"
- Add more descriptions in the commit messages
Changes since v6:
- Change data type of irq_data to u32
- Rewrite mtk_dsi_host_transfer() for simplify
- Move some MIPI_TX config to patch of "drm/mediatek: add *driver_data for different hardware settings".
- Remove device tree from this patch series
Changes since v5:
- Remove DPI device tree and compatible string
- Use one wait queue to handle interrupt status
- Update the interrupt check flow and DSI_INT_ALL_BITS
- Use same function for host read/write command
- various fixes
Changes since v4:
- Add messages when timeout in mtk_disp_mutex_acquire()
- Add descriptions for DISP_REG_MUTEX registers
- Move connection settings for display modules to a separate patch
- Remove 'mt2701-disp-wdma' because it is unused
- Move cleaning up and renaming to a separate patch
- Use wait_event_interruptible_timeout() to replace polling
- Remove irq_num from mtk_dsi structure
- Remove redundant and debug codes
Changes since v3:
- Add DSI support for MIPI DSI panels
- Update BLS binding to PWM nodes
- Remove ufoe device nodes
- Remove redundant parentheses
- Remove global variable initialization
Changes since v2:
- Rename mtk_ddp_mux_sel to mtk_ddp_sout_sel
- Update mt2701_mtk_ddp_ext components
- Changed to prefix naming
- Reorder the patch series
- Use of_device_get_match_data() to get driver private data
- Use iopoll macros to implement mtk_disp_mutex_acquire()
- Removed empty device tree nodes
Changes since v1:
- Removed BLS bindings and codes, which belong to pwm driver
- Moved mtk_disp_mutex_acquire() just before mtk_crtc_ddp_config()
- Split patch into smaller parts
- Added const keyword to constant structure
- Removed codes for special memory align
Thanks,
yt.shen
YT Shen (8):
drm/mediatek: rename macros, add chip prefix
drm/mediatek: add *driver_data for different hardware settings
drm/mediatek: add shadow register support
drm/mediatek: add BLS component
drm/mediatek: update display module connections
drm/mediatek: cleaning up and refine
drm/mediatek: update DSI sub driver flow for sending commands to panel
drm/mediatek: add support for Mediatek SoC MT2701
shaoming chen (2):
drm/mediatek: add dsi interrupt control
drm/mediatek: add dsi transfer function
drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 33 ++-
drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 17 +-
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 76 +++--
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 138 ++++++---
drivers/gpu/drm/mediatek/mtk_drm_ddp.h | 2 +
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 38 ++-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 15 +
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 54 +++-
drivers/gpu/drm/mediatek/mtk_drm_drv.h | 9 +
drivers/gpu/drm/mediatek/mtk_dsi.c | 429 ++++++++++++++++++++++++----
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 70 +++--
11 files changed, 715 insertions(+), 166 deletions(-)
--
1.9.1
^ permalink raw reply
* [PATCH v9 01/10] drm/mediatek: rename macros, add chip prefix
From: YT Shen @ 2016-11-11 11:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478865346-19043-1-git-send-email-yt.shen@mediatek.com>
Add MT8173 prefix for hardware related macros.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 60 +++++++++++++++++-----------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 17ba935..2fc4321 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -36,21 +36,21 @@
#define DISP_REG_MUTEX_MOD(n) (0x2c + 0x20 * (n))
#define DISP_REG_MUTEX_SOF(n) (0x30 + 0x20 * (n))
-#define MUTEX_MOD_DISP_OVL0 BIT(11)
-#define MUTEX_MOD_DISP_OVL1 BIT(12)
-#define MUTEX_MOD_DISP_RDMA0 BIT(13)
-#define MUTEX_MOD_DISP_RDMA1 BIT(14)
-#define MUTEX_MOD_DISP_RDMA2 BIT(15)
-#define MUTEX_MOD_DISP_WDMA0 BIT(16)
-#define MUTEX_MOD_DISP_WDMA1 BIT(17)
-#define MUTEX_MOD_DISP_COLOR0 BIT(18)
-#define MUTEX_MOD_DISP_COLOR1 BIT(19)
-#define MUTEX_MOD_DISP_AAL BIT(20)
-#define MUTEX_MOD_DISP_GAMMA BIT(21)
-#define MUTEX_MOD_DISP_UFOE BIT(22)
-#define MUTEX_MOD_DISP_PWM0 BIT(23)
-#define MUTEX_MOD_DISP_PWM1 BIT(24)
-#define MUTEX_MOD_DISP_OD BIT(25)
+#define MT8173_MUTEX_MOD_DISP_OVL0 BIT(11)
+#define MT8173_MUTEX_MOD_DISP_OVL1 BIT(12)
+#define MT8173_MUTEX_MOD_DISP_RDMA0 BIT(13)
+#define MT8173_MUTEX_MOD_DISP_RDMA1 BIT(14)
+#define MT8173_MUTEX_MOD_DISP_RDMA2 BIT(15)
+#define MT8173_MUTEX_MOD_DISP_WDMA0 BIT(16)
+#define MT8173_MUTEX_MOD_DISP_WDMA1 BIT(17)
+#define MT8173_MUTEX_MOD_DISP_COLOR0 BIT(18)
+#define MT8173_MUTEX_MOD_DISP_COLOR1 BIT(19)
+#define MT8173_MUTEX_MOD_DISP_AAL BIT(20)
+#define MT8173_MUTEX_MOD_DISP_GAMMA BIT(21)
+#define MT8173_MUTEX_MOD_DISP_UFOE BIT(22)
+#define MT8173_MUTEX_MOD_DISP_PWM0 BIT(23)
+#define MT8173_MUTEX_MOD_DISP_PWM1 BIT(24)
+#define MT8173_MUTEX_MOD_DISP_OD BIT(25)
#define MUTEX_SOF_SINGLE_MODE 0
#define MUTEX_SOF_DSI0 1
@@ -80,21 +80,21 @@ struct mtk_ddp {
};
static const unsigned int mutex_mod[DDP_COMPONENT_ID_MAX] = {
- [DDP_COMPONENT_AAL] = MUTEX_MOD_DISP_AAL,
- [DDP_COMPONENT_COLOR0] = MUTEX_MOD_DISP_COLOR0,
- [DDP_COMPONENT_COLOR1] = MUTEX_MOD_DISP_COLOR1,
- [DDP_COMPONENT_GAMMA] = MUTEX_MOD_DISP_GAMMA,
- [DDP_COMPONENT_OD] = MUTEX_MOD_DISP_OD,
- [DDP_COMPONENT_OVL0] = MUTEX_MOD_DISP_OVL0,
- [DDP_COMPONENT_OVL1] = MUTEX_MOD_DISP_OVL1,
- [DDP_COMPONENT_PWM0] = MUTEX_MOD_DISP_PWM0,
- [DDP_COMPONENT_PWM1] = MUTEX_MOD_DISP_PWM1,
- [DDP_COMPONENT_RDMA0] = MUTEX_MOD_DISP_RDMA0,
- [DDP_COMPONENT_RDMA1] = MUTEX_MOD_DISP_RDMA1,
- [DDP_COMPONENT_RDMA2] = MUTEX_MOD_DISP_RDMA2,
- [DDP_COMPONENT_UFOE] = MUTEX_MOD_DISP_UFOE,
- [DDP_COMPONENT_WDMA0] = MUTEX_MOD_DISP_WDMA0,
- [DDP_COMPONENT_WDMA1] = MUTEX_MOD_DISP_WDMA1,
+ [DDP_COMPONENT_AAL] = MT8173_MUTEX_MOD_DISP_AAL,
+ [DDP_COMPONENT_COLOR0] = MT8173_MUTEX_MOD_DISP_COLOR0,
+ [DDP_COMPONENT_COLOR1] = MT8173_MUTEX_MOD_DISP_COLOR1,
+ [DDP_COMPONENT_GAMMA] = MT8173_MUTEX_MOD_DISP_GAMMA,
+ [DDP_COMPONENT_OD] = MT8173_MUTEX_MOD_DISP_OD,
+ [DDP_COMPONENT_OVL0] = MT8173_MUTEX_MOD_DISP_OVL0,
+ [DDP_COMPONENT_OVL1] = MT8173_MUTEX_MOD_DISP_OVL1,
+ [DDP_COMPONENT_PWM0] = MT8173_MUTEX_MOD_DISP_PWM0,
+ [DDP_COMPONENT_PWM1] = MT8173_MUTEX_MOD_DISP_PWM1,
+ [DDP_COMPONENT_RDMA0] = MT8173_MUTEX_MOD_DISP_RDMA0,
+ [DDP_COMPONENT_RDMA1] = MT8173_MUTEX_MOD_DISP_RDMA1,
+ [DDP_COMPONENT_RDMA2] = MT8173_MUTEX_MOD_DISP_RDMA2,
+ [DDP_COMPONENT_UFOE] = MT8173_MUTEX_MOD_DISP_UFOE,
+ [DDP_COMPONENT_WDMA0] = MT8173_MUTEX_MOD_DISP_WDMA0,
+ [DDP_COMPONENT_WDMA1] = MT8173_MUTEX_MOD_DISP_WDMA1,
};
static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
--
1.9.1
^ permalink raw reply related
* [PATCH v9 02/10] drm/mediatek: add *driver_data for different hardware settings
From: YT Shen @ 2016-11-11 11:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478865346-19043-1-git-send-email-yt.shen@mediatek.com>
There are some hardware settings changed, between MT8173 & MT2701:
DISP_OVL address offset changed, color format definition changed.
DISP_RDMA fifo size changed.
DISP_COLOR offset changed.
MIPI_TX pll setting changed.
And add prefix for mtk_ddp_main & mtk_ddp_ext & mutex_mod.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 27 ++++++++++++++++-----------
drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 11 +++++++++--
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 11 +++++++----
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 27 +++++++++++++++++++++------
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 13 +++++++++++++
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 25 ++++++++++++++++++-------
drivers/gpu/drm/mediatek/mtk_drm_drv.h | 8 ++++++++
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 24 +++++++++++++++++++++++-
8 files changed, 115 insertions(+), 31 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 019b7ca..1139834 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -35,13 +35,10 @@
#define DISP_REG_OVL_PITCH(n) (0x0044 + 0x20 * (n))
#define DISP_REG_OVL_RDMA_CTRL(n) (0x00c0 + 0x20 * (n))
#define DISP_REG_OVL_RDMA_GMC(n) (0x00c8 + 0x20 * (n))
-#define DISP_REG_OVL_ADDR(n) (0x0f40 + 0x20 * (n))
#define OVL_RDMA_MEM_GMC 0x40402020
#define OVL_CON_BYTE_SWAP BIT(24)
-#define OVL_CON_CLRFMT_RGB565 (0 << 12)
-#define OVL_CON_CLRFMT_RGB888 (1 << 12)
#define OVL_CON_CLRFMT_RGBA8888 (2 << 12)
#define OVL_CON_CLRFMT_ARGB8888 (3 << 12)
#define OVL_CON_AEN BIT(8)
@@ -137,18 +134,18 @@ static void mtk_ovl_layer_off(struct mtk_ddp_comp *comp, unsigned int idx)
writel(0x0, comp->regs + DISP_REG_OVL_RDMA_CTRL(idx));
}
-static unsigned int ovl_fmt_convert(unsigned int fmt)
+static unsigned int ovl_fmt_convert(struct mtk_ddp_comp *comp, unsigned int fmt)
{
switch (fmt) {
default:
case DRM_FORMAT_RGB565:
- return OVL_CON_CLRFMT_RGB565;
+ return comp->data->ovl.fmt_rgb565;
case DRM_FORMAT_BGR565:
- return OVL_CON_CLRFMT_RGB565 | OVL_CON_BYTE_SWAP;
+ return comp->data->ovl.fmt_rgb565 | OVL_CON_BYTE_SWAP;
case DRM_FORMAT_RGB888:
- return OVL_CON_CLRFMT_RGB888;
+ return comp->data->ovl.fmt_rgb888;
case DRM_FORMAT_BGR888:
- return OVL_CON_CLRFMT_RGB888 | OVL_CON_BYTE_SWAP;
+ return comp->data->ovl.fmt_rgb888 | OVL_CON_BYTE_SWAP;
case DRM_FORMAT_RGBX8888:
case DRM_FORMAT_RGBA8888:
return OVL_CON_CLRFMT_ARGB8888;
@@ -178,7 +175,7 @@ static void mtk_ovl_layer_config(struct mtk_ddp_comp *comp, unsigned int idx,
if (!pending->enable)
mtk_ovl_layer_off(comp, idx);
- con = ovl_fmt_convert(fmt);
+ con = ovl_fmt_convert(comp, fmt);
if (idx != 0)
con |= OVL_CON_AEN | OVL_CON_ALPHA;
@@ -186,7 +183,8 @@ static void mtk_ovl_layer_config(struct mtk_ddp_comp *comp, unsigned int idx,
writel_relaxed(pitch, comp->regs + DISP_REG_OVL_PITCH(idx));
writel_relaxed(src_size, comp->regs + DISP_REG_OVL_SRC_SIZE(idx));
writel_relaxed(offset, comp->regs + DISP_REG_OVL_OFFSET(idx));
- writel_relaxed(addr, comp->regs + DISP_REG_OVL_ADDR(idx));
+ writel_relaxed(addr, comp->regs + comp->data->ovl.addr_offset
+ + idx * 0x20);
if (pending->enable)
mtk_ovl_layer_on(comp, idx);
@@ -270,6 +268,8 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
return ret;
}
+ priv->ddp_comp.data = of_device_get_match_data(dev);
+
platform_set_drvdata(pdev, priv);
ret = component_add(dev, &mtk_disp_ovl_component_ops);
@@ -286,8 +286,13 @@ static int mtk_disp_ovl_remove(struct platform_device *pdev)
return 0;
}
+static const struct mtk_ddp_comp_driver_data mt8173_ovl_driver_data = {
+ .ovl = {0x0f40, 0, 1 << 12}
+};
+
static const struct of_device_id mtk_disp_ovl_driver_dt_match[] = {
- { .compatible = "mediatek,mt8173-disp-ovl", },
+ { .compatible = "mediatek,mt8173-disp-ovl",
+ .data = &mt8173_ovl_driver_data},
{},
};
MODULE_DEVICE_TABLE(of, mtk_disp_ovl_driver_dt_match);
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
index 0df05f9..b4225e2 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
@@ -123,7 +123,7 @@ static void mtk_rdma_config(struct mtk_ddp_comp *comp, unsigned int width,
*/
threshold = width * height * vrefresh * 4 * 7 / 1000000;
reg = RDMA_FIFO_UNDERFLOW_EN |
- RDMA_FIFO_PSEUDO_SIZE(SZ_8K) |
+ RDMA_FIFO_PSEUDO_SIZE(comp->data->rdma_fifo_pseudo_size) |
RDMA_OUTPUT_VALID_FIFO_THRESHOLD(threshold);
writel(reg, comp->regs + DISP_REG_RDMA_FIFO_CON);
}
@@ -208,6 +208,8 @@ static int mtk_disp_rdma_probe(struct platform_device *pdev)
return ret;
}
+ priv->ddp_comp.data = of_device_get_match_data(dev);
+
platform_set_drvdata(pdev, priv);
ret = component_add(dev, &mtk_disp_rdma_component_ops);
@@ -224,8 +226,13 @@ static int mtk_disp_rdma_remove(struct platform_device *pdev)
return 0;
}
+static const struct mtk_ddp_comp_driver_data mt8173_rdma_driver_data = {
+ .rdma_fifo_pseudo_size = SZ_8K,
+};
+
static const struct of_device_id mtk_disp_rdma_driver_dt_match[] = {
- { .compatible = "mediatek,mt8173-disp-rdma", },
+ { .compatible = "mediatek,mt8173-disp-rdma",
+ .data = &mt8173_rdma_driver_data},
{},
};
MODULE_DEVICE_TABLE(of, mtk_disp_rdma_driver_dt_match);
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 2fc4321..8030769 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -77,9 +77,10 @@ struct mtk_ddp {
struct clk *clk;
void __iomem *regs;
struct mtk_disp_mutex mutex[10];
+ const unsigned int *mutex_mod;
};
-static const unsigned int mutex_mod[DDP_COMPONENT_ID_MAX] = {
+static const unsigned int mt8173_mutex_mod[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_AAL] = MT8173_MUTEX_MOD_DISP_AAL,
[DDP_COMPONENT_COLOR0] = MT8173_MUTEX_MOD_DISP_COLOR0,
[DDP_COMPONENT_COLOR1] = MT8173_MUTEX_MOD_DISP_COLOR1,
@@ -247,7 +248,7 @@ void mtk_disp_mutex_add_comp(struct mtk_disp_mutex *mutex,
break;
default:
reg = readl_relaxed(ddp->regs + DISP_REG_MUTEX_MOD(mutex->id));
- reg |= mutex_mod[id];
+ reg |= ddp->mutex_mod[id];
writel_relaxed(reg, ddp->regs + DISP_REG_MUTEX_MOD(mutex->id));
return;
}
@@ -273,7 +274,7 @@ void mtk_disp_mutex_remove_comp(struct mtk_disp_mutex *mutex,
break;
default:
reg = readl_relaxed(ddp->regs + DISP_REG_MUTEX_MOD(mutex->id));
- reg &= ~mutex_mod[id];
+ reg &= ~(ddp->mutex_mod[id]);
writel_relaxed(reg, ddp->regs + DISP_REG_MUTEX_MOD(mutex->id));
break;
}
@@ -326,6 +327,8 @@ static int mtk_ddp_probe(struct platform_device *pdev)
return PTR_ERR(ddp->regs);
}
+ ddp->mutex_mod = of_device_get_match_data(dev);
+
platform_set_drvdata(pdev, ddp);
return 0;
@@ -337,7 +340,7 @@ static int mtk_ddp_remove(struct platform_device *pdev)
}
static const struct of_device_id ddp_driver_dt_match[] = {
- { .compatible = "mediatek,mt8173-disp-mutex" },
+ { .compatible = "mediatek,mt8173-disp-mutex", .data = mt8173_mutex_mod},
{},
};
MODULE_DEVICE_TABLE(of, ddp_driver_dt_match);
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index df33b3c..661a4a0 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -39,9 +39,8 @@
#define DISP_REG_UFO_START 0x0000
#define DISP_COLOR_CFG_MAIN 0x0400
-#define DISP_COLOR_START 0x0c00
-#define DISP_COLOR_WIDTH 0x0c50
-#define DISP_COLOR_HEIGHT 0x0c54
+#define DISP_COLOR_WIDTH 0x50
+#define DISP_COLOR_HEIGHT 0x54
#define DISP_AAL_EN 0x0000
#define DISP_AAL_SIZE 0x0030
@@ -107,15 +106,15 @@ static void mtk_color_config(struct mtk_ddp_comp *comp, unsigned int w,
unsigned int h, unsigned int vrefresh,
unsigned int bpc)
{
- writel(w, comp->regs + DISP_COLOR_WIDTH);
- writel(h, comp->regs + DISP_COLOR_HEIGHT);
+ writel(w, comp->regs + comp->data->color_offset + DISP_COLOR_WIDTH);
+ writel(h, comp->regs + comp->data->color_offset + DISP_COLOR_HEIGHT);
}
static void mtk_color_start(struct mtk_ddp_comp *comp)
{
writel(COLOR_BYPASS_ALL | COLOR_SEQ_SEL,
comp->regs + DISP_COLOR_CFG_MAIN);
- writel(0x1, comp->regs + DISP_COLOR_START);
+ writel(0x1, comp->regs + comp->data->color_offset);
}
static void mtk_od_config(struct mtk_ddp_comp *comp, unsigned int w,
@@ -264,6 +263,16 @@ struct mtk_ddp_comp_match {
[DDP_COMPONENT_WDMA1] = { MTK_DISP_WDMA, 1, NULL },
};
+static const struct mtk_ddp_comp_driver_data mt8173_color_driver_data = {
+ .color_offset = 0x0c00,
+};
+
+static const struct of_device_id mtk_disp_color_driver_dt_match[] = {
+ { .compatible = "mediatek,mt8173-disp-color",
+ .data = &mt8173_color_driver_data},
+ {},
+};
+
int mtk_ddp_comp_get_id(struct device_node *node,
enum mtk_ddp_comp_type comp_type)
{
@@ -286,6 +295,7 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
enum mtk_ddp_comp_type type;
struct device_node *larb_node;
struct platform_device *larb_pdev;
+ const struct of_device_id *match;
if (comp_id < 0 || comp_id >= DDP_COMPONENT_ID_MAX)
return -EINVAL;
@@ -310,6 +320,11 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
type = mtk_ddp_matches[comp_id].type;
+ if (type == MTK_DISP_COLOR) {
+ match = of_match_node(mtk_disp_color_driver_dt_match, node);
+ comp->data = match->data;
+ }
+
/* Only DMA capable components need the LARB property */
comp->larb_dev = NULL;
if (type != MTK_DISP_OVL &&
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 22a33ee..2f6872a 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -78,6 +78,18 @@ struct mtk_ddp_comp_funcs {
struct drm_crtc_state *state);
};
+struct mtk_ddp_comp_driver_data {
+ union {
+ struct ovl {
+ unsigned int addr_offset;
+ unsigned int fmt_rgb565;
+ unsigned int fmt_rgb888;
+ } ovl;
+ unsigned int rdma_fifo_pseudo_size;
+ unsigned int color_offset;
+ };
+};
+
struct mtk_ddp_comp {
struct clk *clk;
void __iomem *regs;
@@ -85,6 +97,7 @@ struct mtk_ddp_comp {
struct device *larb_dev;
enum mtk_ddp_comp_id id;
const struct mtk_ddp_comp_funcs *funcs;
+ const struct mtk_ddp_comp_driver_data *data;
};
static inline void mtk_ddp_comp_config(struct mtk_ddp_comp *comp,
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index cf83f65..5f9b5e8 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -126,7 +126,7 @@ static int mtk_atomic_commit(struct drm_device *drm,
.atomic_commit = mtk_atomic_commit,
};
-static const enum mtk_ddp_comp_id mtk_ddp_main[] = {
+static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
DDP_COMPONENT_OVL0,
DDP_COMPONENT_COLOR0,
DDP_COMPONENT_AAL,
@@ -137,7 +137,7 @@ static int mtk_atomic_commit(struct drm_device *drm,
DDP_COMPONENT_PWM0,
};
-static const enum mtk_ddp_comp_id mtk_ddp_ext[] = {
+static const enum mtk_ddp_comp_id mt8173_mtk_ddp_ext[] = {
DDP_COMPONENT_OVL1,
DDP_COMPONENT_COLOR1,
DDP_COMPONENT_GAMMA,
@@ -145,6 +145,13 @@ static int mtk_atomic_commit(struct drm_device *drm,
DDP_COMPONENT_DPI0,
};
+static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = {
+ .main_path = mt8173_mtk_ddp_main,
+ .main_len = ARRAY_SIZE(mt8173_mtk_ddp_main),
+ .ext_path = mt8173_mtk_ddp_ext,
+ .ext_len = ARRAY_SIZE(mt8173_mtk_ddp_ext),
+};
+
static int mtk_drm_kms_init(struct drm_device *drm)
{
struct mtk_drm_private *private = drm->dev_private;
@@ -187,17 +194,19 @@ static int mtk_drm_kms_init(struct drm_device *drm)
* and each statically assigned to a crtc:
* OVL0 -> COLOR0 -> AAL -> OD -> RDMA0 -> UFOE -> DSI0 ...
*/
- ret = mtk_drm_crtc_create(drm, mtk_ddp_main, ARRAY_SIZE(mtk_ddp_main));
+ ret = mtk_drm_crtc_create(drm, private->data->main_path,
+ private->data->main_len);
if (ret < 0)
goto err_component_unbind;
/* ... and OVL1 -> COLOR1 -> GAMMA -> RDMA1 -> DPI0. */
- ret = mtk_drm_crtc_create(drm, mtk_ddp_ext, ARRAY_SIZE(mtk_ddp_ext));
+ ret = mtk_drm_crtc_create(drm, private->data->ext_path,
+ private->data->ext_len);
if (ret < 0)
goto err_component_unbind;
/* Use OVL device for all DMA memory allocations */
- np = private->comp_node[mtk_ddp_main[0]] ?:
- private->comp_node[mtk_ddp_ext[0]];
+ np = private->comp_node[private->data->main_path[0]] ?:
+ private->comp_node[private->data->ext_path[0]];
pdev = of_find_device_by_node(np);
if (!pdev) {
ret = -ENODEV;
@@ -362,6 +371,7 @@ static int mtk_drm_probe(struct platform_device *pdev)
mutex_init(&private->commit.lock);
INIT_WORK(&private->commit.work, mtk_atomic_work);
+ private->data = of_device_get_match_data(dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
private->config_regs = devm_ioremap_resource(dev, mem);
@@ -512,7 +522,8 @@ static SIMPLE_DEV_PM_OPS(mtk_drm_pm_ops, mtk_drm_sys_suspend,
mtk_drm_sys_resume);
static const struct of_device_id mtk_drm_of_ids[] = {
- { .compatible = "mediatek,mt8173-mmsys", },
+ { .compatible = "mediatek,mt8173-mmsys",
+ .data = &mt8173_mmsys_driver_data},
{ }
};
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
index aa93894..fa0b106 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
@@ -28,6 +28,13 @@
struct drm_property;
struct regmap;
+struct mtk_mmsys_driver_data {
+ const enum mtk_ddp_comp_id *main_path;
+ unsigned int main_len;
+ const enum mtk_ddp_comp_id *ext_path;
+ unsigned int ext_len;
+};
+
struct mtk_drm_private {
struct drm_device *drm;
struct device *dma_dev;
@@ -40,6 +47,7 @@ struct mtk_drm_private {
void __iomem *config_regs;
struct device_node *comp_node[DDP_COMPONENT_ID_MAX];
struct mtk_ddp_comp *ddp_comp[DDP_COMPONENT_ID_MAX];
+ const struct mtk_mmsys_driver_data *data;
struct {
struct drm_atomic_state *state;
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
index 1c366f8..935a8ef 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
@@ -16,6 +16,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
@@ -87,6 +88,9 @@
#define MIPITX_DSI_PLL_CON2 0x58
+#define MIPITX_DSI_PLL_TOP 0x64
+#define RG_DSI_MPPLL_PRESERVE (0xff << 8)
+
#define MIPITX_DSI_PLL_PWR 0x68
#define RG_DSI_MPPLL_SDM_PWR_ON BIT(0)
#define RG_DSI_MPPLL_SDM_ISO_EN BIT(1)
@@ -123,10 +127,15 @@
#define SW_LNT2_HSTX_PRE_OE BIT(24)
#define SW_LNT2_HSTX_OE BIT(25)
+struct mtk_mipitx_data {
+ const u32 data;
+};
+
struct mtk_mipi_tx {
struct device *dev;
void __iomem *regs;
unsigned int data_rate;
+ const struct mtk_mipitx_data *driver_data;
struct clk_hw pll_hw;
struct clk *pll;
};
@@ -243,6 +252,10 @@ static int mtk_mipi_tx_pll_prepare(struct clk_hw *hw)
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON1,
RG_DSI_MPPLL_SDM_SSC_EN);
+ mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_TOP,
+ RG_DSI_MPPLL_PRESERVE,
+ mipi_tx->driver_data->data);
+
return 0;
}
@@ -255,6 +268,9 @@ static void mtk_mipi_tx_pll_unprepare(struct clk_hw *hw)
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON0,
RG_DSI_MPPLL_PLL_EN);
+ mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_TOP,
+ RG_DSI_MPPLL_PRESERVE, 0);
+
mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_PWR,
RG_DSI_MPPLL_SDM_ISO_EN |
RG_DSI_MPPLL_SDM_PWR_ON,
@@ -391,6 +407,7 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
if (!mipi_tx)
return -ENOMEM;
+ mipi_tx->driver_data = of_device_get_match_data(dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mipi_tx->regs = devm_ioremap_resource(dev, mem);
if (IS_ERR(mipi_tx->regs)) {
@@ -448,8 +465,13 @@ static int mtk_mipi_tx_remove(struct platform_device *pdev)
return 0;
}
+static const struct mtk_mipitx_data mt8173_mipitx_data = {
+ .data = (0 << 8)
+};
+
static const struct of_device_id mtk_mipi_tx_match[] = {
- { .compatible = "mediatek,mt8173-mipi-tx", },
+ { .compatible = "mediatek,mt8173-mipi-tx",
+ .data = &mt8173_mipitx_data },
{},
};
--
1.9.1
^ permalink raw reply related
* [PATCH v9 03/10] drm/mediatek: add shadow register support
From: YT Shen @ 2016-11-11 11:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478865346-19043-1-git-send-email-yt.shen@mediatek.com>
We need to acquire mutex before using the resources,
and need to release it after finished.
So we don't need to write registers in the blanking period.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 76 ++++++++++++++++++++-------------
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 25 +++++++++++
drivers/gpu/drm/mediatek/mtk_drm_ddp.h | 2 +
drivers/gpu/drm/mediatek/mtk_drm_drv.h | 1 +
4 files changed, 75 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index 01a21dd..a4f2b3a 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -329,6 +329,42 @@ static void mtk_crtc_ddp_hw_fini(struct mtk_drm_crtc *mtk_crtc)
pm_runtime_put(drm->dev);
}
+static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
+{
+ struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
+ struct mtk_crtc_state *state = to_mtk_crtc_state(mtk_crtc->base.state);
+ struct mtk_ddp_comp *ovl = mtk_crtc->ddp_comp[0];
+ unsigned int i;
+
+ /*
+ * TODO: instead of updating the registers here, we should prepare
+ * working registers in atomic_commit and let the hardware command
+ * queue update module registers on vblank.
+ */
+ if (state->pending_config) {
+ mtk_ddp_comp_config(ovl, state->pending_width,
+ state->pending_height,
+ state->pending_vrefresh, 0);
+
+ state->pending_config = false;
+ }
+
+ if (mtk_crtc->pending_planes) {
+ for (i = 0; i < OVL_LAYER_NR; i++) {
+ struct drm_plane *plane = &mtk_crtc->planes[i];
+ struct mtk_plane_state *plane_state;
+
+ plane_state = to_mtk_plane_state(plane->state);
+
+ if (plane_state->pending.config) {
+ mtk_ddp_comp_layer_config(ovl, i, plane_state);
+ plane_state->pending.config = false;
+ }
+ }
+ mtk_crtc->pending_planes = false;
+ }
+}
+
static void mtk_drm_crtc_enable(struct drm_crtc *crtc)
{
struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
@@ -405,6 +441,7 @@ static void mtk_drm_crtc_atomic_flush(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state)
{
struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
+ struct mtk_drm_private *priv = crtc->dev->dev_private;
unsigned int pending_planes = 0;
int i;
@@ -423,6 +460,13 @@ static void mtk_drm_crtc_atomic_flush(struct drm_crtc *crtc,
}
if (pending_planes)
mtk_crtc->pending_planes = true;
+
+ if (priv->data->shadow_register) {
+ mtk_disp_mutex_acquire(mtk_crtc->mutex);
+ mtk_crtc_ddp_config(crtc);
+ mtk_disp_mutex_release(mtk_crtc->mutex);
+ }
+
if (crtc->state->color_mgmt_changed)
for (i = 0; i < mtk_crtc->ddp_comp_nr; i++)
mtk_ddp_gamma_set(mtk_crtc->ddp_comp[i], crtc->state);
@@ -471,36 +515,10 @@ static int mtk_drm_crtc_init(struct drm_device *drm,
void mtk_crtc_ddp_irq(struct drm_crtc *crtc, struct mtk_ddp_comp *ovl)
{
struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
- struct mtk_crtc_state *state = to_mtk_crtc_state(mtk_crtc->base.state);
- unsigned int i;
+ struct mtk_drm_private *priv = crtc->dev->dev_private;
- /*
- * TODO: instead of updating the registers here, we should prepare
- * working registers in atomic_commit and let the hardware command
- * queue update module registers on vblank.
- */
- if (state->pending_config) {
- mtk_ddp_comp_config(ovl, state->pending_width,
- state->pending_height,
- state->pending_vrefresh, 0);
-
- state->pending_config = false;
- }
-
- if (mtk_crtc->pending_planes) {
- for (i = 0; i < OVL_LAYER_NR; i++) {
- struct drm_plane *plane = &mtk_crtc->planes[i];
- struct mtk_plane_state *plane_state;
-
- plane_state = to_mtk_plane_state(plane->state);
-
- if (plane_state->pending.config) {
- mtk_ddp_comp_layer_config(ovl, i, plane_state);
- plane_state->pending.config = false;
- }
- }
- mtk_crtc->pending_planes = false;
- }
+ if (!priv->data->shadow_register)
+ mtk_crtc_ddp_config(crtc);
mtk_drm_finish_page_flip(mtk_crtc);
}
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 8030769..b77d456 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -12,6 +12,7 @@
*/
#include <linux/clk.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
@@ -32,10 +33,13 @@
#define DISP_REG_CONFIG_MMSYS_CG_CON0 0x100
#define DISP_REG_MUTEX_EN(n) (0x20 + 0x20 * (n))
+#define DISP_REG_MUTEX(n) (0x24 + 0x20 * (n))
#define DISP_REG_MUTEX_RST(n) (0x28 + 0x20 * (n))
#define DISP_REG_MUTEX_MOD(n) (0x2c + 0x20 * (n))
#define DISP_REG_MUTEX_SOF(n) (0x30 + 0x20 * (n))
+#define INT_MUTEX BIT(1)
+
#define MT8173_MUTEX_MOD_DISP_OVL0 BIT(11)
#define MT8173_MUTEX_MOD_DISP_OVL1 BIT(12)
#define MT8173_MUTEX_MOD_DISP_RDMA0 BIT(13)
@@ -300,6 +304,27 @@ void mtk_disp_mutex_disable(struct mtk_disp_mutex *mutex)
writel(0, ddp->regs + DISP_REG_MUTEX_EN(mutex->id));
}
+void mtk_disp_mutex_acquire(struct mtk_disp_mutex *mutex)
+{
+ struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
+ mutex[mutex->id]);
+ u32 tmp;
+
+ writel(1, ddp->regs + DISP_REG_MUTEX_EN(mutex->id));
+ writel(1, ddp->regs + DISP_REG_MUTEX(mutex->id));
+ if (readl_poll_timeout_atomic(ddp->regs + DISP_REG_MUTEX(mutex->id),
+ tmp, tmp & INT_MUTEX, 1, 10000))
+ pr_err("could not acquire mutex %d\n", mutex->id);
+}
+
+void mtk_disp_mutex_release(struct mtk_disp_mutex *mutex)
+{
+ struct mtk_ddp *ddp = container_of(mutex, struct mtk_ddp,
+ mutex[mutex->id]);
+
+ writel(0, ddp->regs + DISP_REG_MUTEX(mutex->id));
+}
+
static int mtk_ddp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp.h
index 92c1175..f9a7991 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.h
@@ -37,5 +37,7 @@ void mtk_disp_mutex_remove_comp(struct mtk_disp_mutex *mutex,
enum mtk_ddp_comp_id id);
void mtk_disp_mutex_unprepare(struct mtk_disp_mutex *mutex);
void mtk_disp_mutex_put(struct mtk_disp_mutex *mutex);
+void mtk_disp_mutex_acquire(struct mtk_disp_mutex *mutex);
+void mtk_disp_mutex_release(struct mtk_disp_mutex *mutex);
#endif /* MTK_DRM_DDP_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
index fa0b106..94f8b66 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
@@ -33,6 +33,7 @@ struct mtk_mmsys_driver_data {
unsigned int main_len;
const enum mtk_ddp_comp_id *ext_path;
unsigned int ext_len;
+ bool shadow_register;
};
struct mtk_drm_private {
--
1.9.1
^ permalink raw reply related
* [PATCH v9 04/10] drm/mediatek: add BLS component
From: YT Shen @ 2016-11-11 11:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478865346-19043-1-git-send-email-yt.shen@mediatek.com>
Add BLS component for PWM + GAMMA function
Signed-off-by: YT Shen <yt.shen@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 5 ++++-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 2 ++
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 661a4a0..b78b2e6 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -235,6 +235,7 @@ static void mtk_gamma_set(struct mtk_ddp_comp *comp,
[MTK_DISP_PWM] = "pwm",
[MTK_DISP_MUTEX] = "mutex",
[MTK_DISP_OD] = "od",
+ [MTK_DISP_BLS] = "bls",
};
struct mtk_ddp_comp_match {
@@ -245,6 +246,7 @@ struct mtk_ddp_comp_match {
static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_AAL] = { MTK_DISP_AAL, 0, &ddp_aal },
+ [DDP_COMPONENT_BLS] = { MTK_DISP_BLS, 0, NULL },
[DDP_COMPONENT_COLOR0] = { MTK_DISP_COLOR, 0, &ddp_color },
[DDP_COMPONENT_COLOR1] = { MTK_DISP_COLOR, 1, &ddp_color },
[DDP_COMPONENT_DPI0] = { MTK_DPI, 0, NULL },
@@ -303,7 +305,8 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
comp->id = comp_id;
comp->funcs = funcs ?: mtk_ddp_matches[comp_id].funcs;
- if (comp_id == DDP_COMPONENT_DPI0 ||
+ if (comp_id == DDP_COMPONENT_BLS ||
+ comp_id == DDP_COMPONENT_DPI0 ||
comp_id == DDP_COMPONENT_DSI0 ||
comp_id == DDP_COMPONENT_PWM0) {
comp->regs = NULL;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 2f6872a..30faf46 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -36,11 +36,13 @@ enum mtk_ddp_comp_type {
MTK_DISP_PWM,
MTK_DISP_MUTEX,
MTK_DISP_OD,
+ MTK_DISP_BLS,
MTK_DDP_COMP_TYPE_MAX,
};
enum mtk_ddp_comp_id {
DDP_COMPONENT_AAL,
+ DDP_COMPONENT_BLS,
DDP_COMPONENT_COLOR0,
DDP_COMPONENT_COLOR1,
DDP_COMPONENT_DPI0,
--
1.9.1
^ permalink raw reply related
* [PATCH v9 05/10] drm/mediatek: update display module connections
From: YT Shen @ 2016-11-11 11:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478865346-19043-1-git-send-email-yt.shen@mediatek.com>
update connections for OVL, RDMA, BLS, DSI
Signed-off-by: YT Shen <yt.shen@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index b77d456..a9b209c 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -32,6 +32,10 @@
#define DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN 0x0c8
#define DISP_REG_CONFIG_MMSYS_CG_CON0 0x100
+#define DISP_REG_CONFIG_DISP_OVL_MOUT_EN 0x030
+#define DISP_REG_CONFIG_OUT_SEL 0x04c
+#define DISP_REG_CONFIG_DSI_SEL 0x050
+
#define DISP_REG_MUTEX_EN(n) (0x20 + 0x20 * (n))
#define DISP_REG_MUTEX(n) (0x24 + 0x20 * (n))
#define DISP_REG_MUTEX_RST(n) (0x28 + 0x20 * (n))
@@ -71,6 +75,10 @@
#define DPI0_SEL_IN_RDMA1 0x1
#define COLOR1_SEL_IN_OVL1 0x1
+#define OVL_MOUT_EN_RDMA 0x1
+#define BLS_TO_DSI_RDMA1_TO_DPI1 0x8
+#define DSI_SEL_IN_BLS 0x0
+
struct mtk_disp_mutex {
int id;
bool claimed;
@@ -111,6 +119,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur,
if (cur == DDP_COMPONENT_OVL0 && next == DDP_COMPONENT_COLOR0) {
*addr = DISP_REG_CONFIG_DISP_OVL0_MOUT_EN;
value = OVL0_MOUT_EN_COLOR0;
+ } else if (cur == DDP_COMPONENT_OVL0 && next == DDP_COMPONENT_RDMA0) {
+ *addr = DISP_REG_CONFIG_DISP_OVL_MOUT_EN;
+ value = OVL_MOUT_EN_RDMA;
} else if (cur == DDP_COMPONENT_OD && next == DDP_COMPONENT_RDMA0) {
*addr = DISP_REG_CONFIG_DISP_OD_MOUT_EN;
value = OD_MOUT_EN_RDMA0;
@@ -148,6 +159,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
} else if (cur == DDP_COMPONENT_OVL1 && next == DDP_COMPONENT_COLOR1) {
*addr = DISP_REG_CONFIG_DISP_COLOR1_SEL_IN;
value = COLOR1_SEL_IN_OVL1;
+ } else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0) {
+ *addr = DISP_REG_CONFIG_DSI_SEL;
+ value = DSI_SEL_IN_BLS;
} else {
value = 0;
}
@@ -155,6 +169,15 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
return value;
}
+static void mtk_ddp_sout_sel(void __iomem *config_regs,
+ enum mtk_ddp_comp_id cur,
+ enum mtk_ddp_comp_id next)
+{
+ if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0)
+ writel_relaxed(BLS_TO_DSI_RDMA1_TO_DPI1,
+ config_regs + DISP_REG_CONFIG_OUT_SEL);
+}
+
void mtk_ddp_add_comp_to_path(void __iomem *config_regs,
enum mtk_ddp_comp_id cur,
enum mtk_ddp_comp_id next)
@@ -167,6 +190,8 @@ void mtk_ddp_add_comp_to_path(void __iomem *config_regs,
writel_relaxed(reg, config_regs + addr);
}
+ mtk_ddp_sout_sel(config_regs, cur, next);
+
value = mtk_ddp_sel_in(cur, next, &addr);
if (value) {
reg = readl_relaxed(config_regs + addr) | value;
--
1.9.1
^ permalink raw reply related
* [PATCH v9 06/10] drm/mediatek: cleaning up and refine
From: YT Shen @ 2016-11-11 11:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478865346-19043-1-git-send-email-yt.shen@mediatek.com>
cleaning up unused define and refine function name and variable
Signed-off-by: shaoming chen <shaoming.chen@mediatek.com>
Signed-off-by: YT Shen <yt.shen@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 77 ++++++++++++++++------------------
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 8 ++--
2 files changed, 41 insertions(+), 44 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 28b2044..4efeb38 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -27,9 +27,6 @@
#include "mtk_drm_ddp_comp.h"
-#define DSI_VIDEO_FIFO_DEPTH (1920 / 4)
-#define DSI_HOST_FIFO_DEPTH 64
-
#define DSI_START 0x00
#define DSI_CON_CTRL 0x10
@@ -46,7 +43,7 @@
#define MIX_MODE BIT(17)
#define DSI_TXRX_CTRL 0x18
-#define VC_NUM (2 << 0)
+#define VC_NUM BIT(1)
#define LANE_NUM (0xf << 2)
#define DIS_EOT BIT(6)
#define NULL_EN BIT(7)
@@ -158,11 +155,11 @@ static void mtk_dsi_mask(struct mtk_dsi *dsi, u32 offset, u32 mask, u32 data)
writel((temp & ~mask) | (data & mask), dsi->regs + offset);
}
-static void dsi_phy_timconfig(struct mtk_dsi *dsi)
+static void mtk_dsi_phy_timconfig(struct mtk_dsi *dsi)
{
u32 timcon0, timcon1, timcon2, timcon3;
- unsigned int ui, cycle_time;
- unsigned int lpx;
+ u32 ui, cycle_time;
+ u32 lpx;
ui = 1000 / dsi->data_rate + 0x01;
cycle_time = 8000 / dsi->data_rate + 0x01;
@@ -192,7 +189,7 @@ static void mtk_dsi_disable(struct mtk_dsi *dsi)
mtk_dsi_mask(dsi, DSI_CON_CTRL, DSI_EN, 0);
}
-static void mtk_dsi_reset(struct mtk_dsi *dsi)
+static void mtk_dsi_reset_engine(struct mtk_dsi *dsi)
{
mtk_dsi_mask(dsi, DSI_CON_CTRL, DSI_RESET, DSI_RESET);
mtk_dsi_mask(dsi, DSI_CON_CTRL, DSI_RESET, 0);
@@ -235,8 +232,8 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
}
mtk_dsi_enable(dsi);
- mtk_dsi_reset(dsi);
- dsi_phy_timconfig(dsi);
+ mtk_dsi_reset_engine(dsi);
+ mtk_dsi_phy_timconfig(dsi);
return 0;
@@ -249,33 +246,33 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
return ret;
}
-static void dsi_clk_ulp_mode_enter(struct mtk_dsi *dsi)
+static void mtk_dsi_clk_ulp_mode_enter(struct mtk_dsi *dsi)
{
mtk_dsi_mask(dsi, DSI_PHY_LCCON, LC_HS_TX_EN, 0);
mtk_dsi_mask(dsi, DSI_PHY_LCCON, LC_ULPM_EN, 0);
}
-static void dsi_clk_ulp_mode_leave(struct mtk_dsi *dsi)
+static void mtk_dsi_clk_ulp_mode_leave(struct mtk_dsi *dsi)
{
mtk_dsi_mask(dsi, DSI_PHY_LCCON, LC_ULPM_EN, 0);
mtk_dsi_mask(dsi, DSI_PHY_LCCON, LC_WAKEUP_EN, LC_WAKEUP_EN);
mtk_dsi_mask(dsi, DSI_PHY_LCCON, LC_WAKEUP_EN, 0);
}
-static void dsi_lane0_ulp_mode_enter(struct mtk_dsi *dsi)
+static void mtk_dsi_lane0_ulp_mode_enter(struct mtk_dsi *dsi)
{
mtk_dsi_mask(dsi, DSI_PHY_LD0CON, LD0_HS_TX_EN, 0);
mtk_dsi_mask(dsi, DSI_PHY_LD0CON, LD0_ULPM_EN, 0);
}
-static void dsi_lane0_ulp_mode_leave(struct mtk_dsi *dsi)
+static void mtk_dsi_lane0_ulp_mode_leave(struct mtk_dsi *dsi)
{
mtk_dsi_mask(dsi, DSI_PHY_LD0CON, LD0_ULPM_EN, 0);
mtk_dsi_mask(dsi, DSI_PHY_LD0CON, LD0_WAKEUP_EN, LD0_WAKEUP_EN);
mtk_dsi_mask(dsi, DSI_PHY_LD0CON, LD0_WAKEUP_EN, 0);
}
-static bool dsi_clk_hs_state(struct mtk_dsi *dsi)
+static bool mtk_dsi_clk_hs_state(struct mtk_dsi *dsi)
{
u32 tmp_reg1;
@@ -283,15 +280,15 @@ static bool dsi_clk_hs_state(struct mtk_dsi *dsi)
return ((tmp_reg1 & LC_HS_TX_EN) == 1) ? true : false;
}
-static void dsi_clk_hs_mode(struct mtk_dsi *dsi, bool enter)
+static void mtk_dsi_clk_hs_mode(struct mtk_dsi *dsi, bool enter)
{
- if (enter && !dsi_clk_hs_state(dsi))
+ if (enter && !mtk_dsi_clk_hs_state(dsi))
mtk_dsi_mask(dsi, DSI_PHY_LCCON, LC_HS_TX_EN, LC_HS_TX_EN);
- else if (!enter && dsi_clk_hs_state(dsi))
+ else if (!enter && mtk_dsi_clk_hs_state(dsi))
mtk_dsi_mask(dsi, DSI_PHY_LCCON, LC_HS_TX_EN, 0);
}
-static void dsi_set_mode(struct mtk_dsi *dsi)
+static void mtk_dsi_set_mode(struct mtk_dsi *dsi)
{
u32 vid_mode = CMD_MODE;
@@ -306,7 +303,7 @@ static void dsi_set_mode(struct mtk_dsi *dsi)
writel(vid_mode, dsi->regs + DSI_MODE_CTRL);
}
-static void dsi_ps_control_vact(struct mtk_dsi *dsi)
+static void mtk_dsi_ps_control_vact(struct mtk_dsi *dsi)
{
struct videomode *vm = &dsi->vm;
u32 dsi_buf_bpp, ps_wc;
@@ -340,7 +337,7 @@ static void dsi_ps_control_vact(struct mtk_dsi *dsi)
writel(ps_wc, dsi->regs + DSI_HSTX_CKL_WC);
}
-static void dsi_rxtx_control(struct mtk_dsi *dsi)
+static void mtk_dsi_rxtx_control(struct mtk_dsi *dsi)
{
u32 tmp_reg;
@@ -365,9 +362,9 @@ static void dsi_rxtx_control(struct mtk_dsi *dsi)
writel(tmp_reg, dsi->regs + DSI_TXRX_CTRL);
}
-static void dsi_ps_control(struct mtk_dsi *dsi)
+static void mtk_dsi_ps_control(struct mtk_dsi *dsi)
{
- unsigned int dsi_tmp_buf_bpp;
+ u32 dsi_tmp_buf_bpp;
u32 tmp_reg;
switch (dsi->format) {
@@ -397,12 +394,12 @@ static void dsi_ps_control(struct mtk_dsi *dsi)
writel(tmp_reg, dsi->regs + DSI_PSCTRL);
}
-static void dsi_config_vdo_timing(struct mtk_dsi *dsi)
+static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
{
- unsigned int horizontal_sync_active_byte;
- unsigned int horizontal_backporch_byte;
- unsigned int horizontal_frontporch_byte;
- unsigned int dsi_tmp_buf_bpp;
+ u32 horizontal_sync_active_byte;
+ u32 horizontal_backporch_byte;
+ u32 horizontal_frontporch_byte;
+ u32 dsi_tmp_buf_bpp;
struct videomode *vm = &dsi->vm;
@@ -431,7 +428,7 @@ static void dsi_config_vdo_timing(struct mtk_dsi *dsi)
writel(horizontal_backporch_byte, dsi->regs + DSI_HBP_WC);
writel(horizontal_frontporch_byte, dsi->regs + DSI_HFP_WC);
- dsi_ps_control(dsi);
+ mtk_dsi_ps_control(dsi);
}
static void mtk_dsi_start(struct mtk_dsi *dsi)
@@ -448,8 +445,8 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
if (--dsi->refcount != 0)
return;
- dsi_lane0_ulp_mode_enter(dsi);
- dsi_clk_ulp_mode_enter(dsi);
+ mtk_dsi_lane0_ulp_mode_enter(dsi);
+ mtk_dsi_clk_ulp_mode_enter(dsi);
mtk_dsi_disable(dsi);
@@ -479,18 +476,18 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi)
return;
}
- dsi_rxtx_control(dsi);
+ mtk_dsi_rxtx_control(dsi);
- dsi_clk_ulp_mode_leave(dsi);
- dsi_lane0_ulp_mode_leave(dsi);
- dsi_clk_hs_mode(dsi, 0);
- dsi_set_mode(dsi);
+ mtk_dsi_clk_ulp_mode_leave(dsi);
+ mtk_dsi_lane0_ulp_mode_leave(dsi);
+ mtk_dsi_clk_hs_mode(dsi, 0);
+ mtk_dsi_set_mode(dsi);
- dsi_ps_control_vact(dsi);
- dsi_config_vdo_timing(dsi);
+ mtk_dsi_ps_control_vact(dsi);
+ mtk_dsi_config_vdo_timing(dsi);
- dsi_set_mode(dsi);
- dsi_clk_hs_mode(dsi, 1);
+ mtk_dsi_set_mode(dsi);
+ mtk_dsi_clk_hs_mode(dsi, 1);
mtk_dsi_start(dsi);
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
index 935a8ef..108d31a 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
@@ -134,7 +134,7 @@ struct mtk_mipitx_data {
struct mtk_mipi_tx {
struct device *dev;
void __iomem *regs;
- unsigned int data_rate;
+ u32 data_rate;
const struct mtk_mipitx_data *driver_data;
struct clk_hw pll_hw;
struct clk *pll;
@@ -172,7 +172,7 @@ static void mtk_mipi_tx_update_bits(struct mtk_mipi_tx *mipi_tx, u32 offset,
static int mtk_mipi_tx_pll_prepare(struct clk_hw *hw)
{
struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw);
- unsigned int txdiv, txdiv0, txdiv1;
+ u8 txdiv, txdiv0, txdiv1;
u64 pcw;
dev_dbg(mipi_tx->dev, "prepare: %u Hz\n", mipi_tx->data_rate);
@@ -326,7 +326,7 @@ static unsigned long mtk_mipi_tx_pll_recalc_rate(struct clk_hw *hw,
static int mtk_mipi_tx_power_on_signal(struct phy *phy)
{
struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
- unsigned int reg;
+ u32 reg;
for (reg = MIPITX_DSI_CLOCK_LANE;
reg <= MIPITX_DSI_DATA_LANE3; reg += 4)
@@ -357,7 +357,7 @@ static int mtk_mipi_tx_power_on(struct phy *phy)
static void mtk_mipi_tx_power_off_signal(struct phy *phy)
{
struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
- unsigned int reg;
+ u32 reg;
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_TOP_CON,
RG_DSI_PAD_TIE_LOW_EN);
--
1.9.1
^ permalink raw reply related
* [PATCH v9 07/10] drm/mediatek: add dsi interrupt control
From: YT Shen @ 2016-11-11 11:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478865346-19043-1-git-send-email-yt.shen@mediatek.com>
From: shaoming chen <shaoming.chen@mediatek.com>
add dsi interrupt control
Signed-off-by: shaoming chen <shaoming.chen@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 93 ++++++++++++++++++++++++++++++++++++++
1 file changed, 93 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 4efeb38..e5832837 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -18,6 +18,7 @@
#include <drm/drm_panel.h>
#include <linux/clk.h>
#include <linux/component.h>
+#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/of_graph.h>
@@ -29,6 +30,16 @@
#define DSI_START 0x00
+#define DSI_INTEN 0x08
+
+#define DSI_INTSTA 0x0c
+#define LPRX_RD_RDY_INT_FLAG BIT(0)
+#define CMD_DONE_INT_FLAG BIT(1)
+#define TE_RDY_INT_FLAG BIT(2)
+#define VM_DONE_INT_FLAG BIT(3)
+#define EXT_TE_RDY_INT_FLAG BIT(4)
+#define DSI_BUSY BIT(31)
+
#define DSI_CON_CTRL 0x10
#define DSI_RESET BIT(0)
#define DSI_EN BIT(1)
@@ -71,6 +82,9 @@
#define DSI_HSTX_CKL_WC 0x64
+#define DSI_RACK 0x84
+#define RACK BIT(0)
+
#define DSI_PHY_LCCON 0x104
#define LC_HS_TX_EN BIT(0)
#define LC_ULPM_EN BIT(1)
@@ -131,6 +145,8 @@ struct mtk_dsi {
struct videomode vm;
int refcount;
bool enabled;
+ u32 irq_data;
+ wait_queue_head_t irq_wait_queue;
};
static inline struct mtk_dsi *encoder_to_dsi(struct drm_encoder *e)
@@ -437,6 +453,64 @@ static void mtk_dsi_start(struct mtk_dsi *dsi)
writel(1, dsi->regs + DSI_START);
}
+static void mtk_dsi_set_interrupt_enable(struct mtk_dsi *dsi)
+{
+ u32 inten = LPRX_RD_RDY_INT_FLAG | CMD_DONE_INT_FLAG | VM_DONE_INT_FLAG;
+
+ writel(inten, dsi->regs + DSI_INTEN);
+}
+
+static void mtk_dsi_irq_data_set(struct mtk_dsi *dsi, u32 irq_bit)
+{
+ dsi->irq_data |= irq_bit;
+}
+
+static __maybe_unused void mtk_dsi_irq_data_clear(struct mtk_dsi *dsi, u32 irq_bit)
+{
+ dsi->irq_data &= ~irq_bit;
+}
+
+static __maybe_unused s32 mtk_dsi_wait_for_irq_done(struct mtk_dsi *dsi, u32 irq_flag,
+ unsigned int timeout)
+{
+ s32 ret = 0;
+ unsigned long jiffies = msecs_to_jiffies(timeout);
+
+ ret = wait_event_interruptible_timeout(dsi->irq_wait_queue,
+ dsi->irq_data & irq_flag,
+ jiffies);
+ if (ret == 0) {
+ dev_info(dsi->dev, "Wait DSI IRQ(0x%08x) Timeout\n", irq_flag);
+
+ mtk_dsi_enable(dsi);
+ mtk_dsi_reset_engine(dsi);
+ }
+
+ return ret;
+}
+
+static irqreturn_t mtk_dsi_irq(int irq, void *dev_id)
+{
+ struct mtk_dsi *dsi = dev_id;
+ u32 status, tmp;
+ u32 flag = LPRX_RD_RDY_INT_FLAG | CMD_DONE_INT_FLAG | VM_DONE_INT_FLAG;
+
+ status = readl(dsi->regs + DSI_INTSTA) & flag;
+
+ if (status) {
+ do {
+ mtk_dsi_mask(dsi, DSI_RACK, RACK, RACK);
+ tmp = readl(dsi->regs + DSI_INTSTA);
+ } while (tmp & DSI_BUSY);
+
+ mtk_dsi_mask(dsi, DSI_INTSTA, status, 0);
+ mtk_dsi_irq_data_set(dsi, status);
+ wake_up_interruptible(&dsi->irq_wait_queue);
+ }
+
+ return IRQ_HANDLED;
+}
+
static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
{
if (WARN_ON(dsi->refcount == 0))
@@ -485,6 +559,7 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi)
mtk_dsi_ps_control_vact(dsi);
mtk_dsi_config_vdo_timing(dsi);
+ mtk_dsi_set_interrupt_enable(dsi);
mtk_dsi_set_mode(dsi);
mtk_dsi_clk_hs_mode(dsi, 1);
@@ -793,6 +868,7 @@ static int mtk_dsi_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *remote_node, *endpoint;
struct resource *regs;
+ int irq_num;
int comp_id;
int ret;
@@ -869,6 +945,23 @@ static int mtk_dsi_probe(struct platform_device *pdev)
return ret;
}
+ irq_num = platform_get_irq(pdev, 0);
+ if (irq_num < 0) {
+ dev_err(&pdev->dev, "failed to request dsi irq resource\n");
+ return -EPROBE_DEFER;
+ }
+
+ irq_set_status_flags(irq_num, IRQ_TYPE_LEVEL_LOW);
+ ret = devm_request_irq(&pdev->dev, irq_num, mtk_dsi_irq,
+ IRQF_TRIGGER_LOW, dev_name(&pdev->dev), dsi);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request mediatek dsi irq\n");
+ return -EPROBE_DEFER;
+ }
+ dev_info(dev, "dsi irq num is 0x%x\n", irq_num);
+
+ init_waitqueue_head(&dsi->irq_wait_queue);
+
platform_set_drvdata(pdev, dsi);
return component_add(&pdev->dev, &mtk_dsi_component_ops);
--
1.9.1
^ permalink raw reply related
* [PATCH v9 08/10] drm/mediatek: add dsi transfer function
From: YT Shen @ 2016-11-11 11:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478865346-19043-1-git-send-email-yt.shen@mediatek.com>
From: shaoming chen <shaoming.chen@mediatek.com>
add dsi read/write commands for transfer function
Signed-off-by: shaoming chen <shaoming.chen@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 168 ++++++++++++++++++++++++++++++++++++-
1 file changed, 166 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index e5832837..860b84f 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -24,6 +24,7 @@
#include <linux/of_graph.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <video/mipi_display.h>
#include <video/videomode.h>
#include "mtk_drm_ddp_comp.h"
@@ -80,8 +81,16 @@
#define DSI_HBP_WC 0x54
#define DSI_HFP_WC 0x58
+#define DSI_CMDQ_SIZE 0x60
+#define CMDQ_SIZE 0x3f
+
#define DSI_HSTX_CKL_WC 0x64
+#define DSI_RX_DATA0 0x74
+#define DSI_RX_DATA1 0x78
+#define DSI_RX_DATA2 0x7c
+#define DSI_RX_DATA3 0x80
+
#define DSI_RACK 0x84
#define RACK BIT(0)
@@ -117,8 +126,23 @@
#define CLK_HS_POST (0xff << 8)
#define CLK_HS_EXIT (0xff << 16)
+#define DSI_CMDQ0 0x180
+#define CONFIG (0xff << 0)
+#define SHORT_PACKET 0
+#define LONG_PACKET 2
+#define BTA BIT(2)
+#define DATA_ID (0xff << 8)
+#define DATA_0 (0xff << 16)
+#define DATA_1 (0xff << 24)
+
#define NS_TO_CYCLE(n, c) ((n) / (c) + (((n) % (c)) ? 1 : 0))
+#define MTK_DSI_HOST_IS_READ(type) \
+ ((type == MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM) || \
+ (type == MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM) || \
+ (type == MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM) || \
+ (type == MIPI_DSI_DCS_READ))
+
struct phy;
struct mtk_dsi {
@@ -465,12 +489,12 @@ static void mtk_dsi_irq_data_set(struct mtk_dsi *dsi, u32 irq_bit)
dsi->irq_data |= irq_bit;
}
-static __maybe_unused void mtk_dsi_irq_data_clear(struct mtk_dsi *dsi, u32 irq_bit)
+static void mtk_dsi_irq_data_clear(struct mtk_dsi *dsi, u32 irq_bit)
{
dsi->irq_data &= ~irq_bit;
}
-static __maybe_unused s32 mtk_dsi_wait_for_irq_done(struct mtk_dsi *dsi, u32 irq_flag,
+static s32 mtk_dsi_wait_for_irq_done(struct mtk_dsi *dsi, u32 irq_flag,
unsigned int timeout)
{
s32 ret = 0;
@@ -807,9 +831,149 @@ static int mtk_dsi_host_detach(struct mipi_dsi_host *host,
return 0;
}
+static void mtk_dsi_wait_for_idle(struct mtk_dsi *dsi)
+{
+ u32 timeout_ms = 500000; /* total 1s ~ 2s timeout */
+
+ while (timeout_ms--) {
+ if (!(readl(dsi->regs + DSI_INTSTA) & DSI_BUSY))
+ break;
+
+ usleep_range(2, 4);
+ }
+
+ if (timeout_ms == 0) {
+ dev_info(dsi->dev, "polling dsi wait not busy timeout!\n");
+
+ mtk_dsi_enable(dsi);
+ mtk_dsi_reset_engine(dsi);
+ }
+}
+
+static u32 mtk_dsi_recv_cnt(u8 type, u8 *read_data)
+{
+ switch (type) {
+ case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE:
+ case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
+ return 1;
+ case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
+ case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
+ return 2;
+ case MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE:
+ case MIPI_DSI_RX_DCS_LONG_READ_RESPONSE:
+ return read_data[1] + read_data[2] * 16;
+ case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
+ DRM_INFO("type is 0x02, try again\n");
+ break;
+ default:
+ DRM_INFO("type(0x%x) cannot be non-recognite\n", type);
+ break;
+ }
+
+ return 0;
+}
+
+static void mtk_dsi_cmdq(struct mtk_dsi *dsi, const struct mipi_dsi_msg *msg)
+{
+ const char *tx_buf = msg->tx_buf;
+ u8 config, cmdq_size, cmdq_off, type = msg->type;
+ u32 reg_val, cmdq_mask, i;
+
+ if (MTK_DSI_HOST_IS_READ(type))
+ config = BTA;
+ else
+ config = (msg->tx_len > 2) ? LONG_PACKET : SHORT_PACKET;
+
+ if (msg->tx_len > 2) {
+ cmdq_size = 1 + (msg->tx_len + 3) / 4;
+ cmdq_off = 4;
+ cmdq_mask = CONFIG | DATA_ID | DATA_0 | DATA_1;
+ reg_val = (msg->tx_len << 16) | (type << 8) | config;
+ } else {
+ cmdq_size = 1;
+ cmdq_off = 2;
+ cmdq_mask = CONFIG | DATA_ID;
+ reg_val = (type << 8) | config;
+ }
+
+ for (i = 0; i < msg->tx_len; i++)
+ writeb(tx_buf[i], dsi->regs + DSI_CMDQ0 + cmdq_off + i);
+
+ mtk_dsi_mask(dsi, DSI_CMDQ0, cmdq_mask, reg_val);
+ mtk_dsi_mask(dsi, DSI_CMDQ_SIZE, CMDQ_SIZE, cmdq_size);
+}
+
+static ssize_t mtk_dsi_host_send_cmd(struct mtk_dsi *dsi,
+ const struct mipi_dsi_msg *msg, u8 flag)
+{
+ mtk_dsi_wait_for_idle(dsi);
+ mtk_dsi_irq_data_clear(dsi, flag);
+ mtk_dsi_cmdq(dsi, msg);
+ mtk_dsi_start(dsi);
+
+ if (!mtk_dsi_wait_for_irq_done(dsi, flag, 2000))
+ return -1;
+ else
+ return 0;
+}
+
+static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host,
+ const struct mipi_dsi_msg *msg)
+{
+ struct mtk_dsi *dsi = host_to_dsi(host);
+ u32 recv_cnt, i;
+ u8 read_data[16];
+ void *src_addr;
+ u8 irq_flag = CMD_DONE_INT_FLAG;
+
+ if (readl(dsi->regs + DSI_MODE_CTRL) & MODE) {
+ dev_info(dsi->dev, "dsi engine is not command mode\n");
+ return -1;
+ }
+
+ if (MTK_DSI_HOST_IS_READ(msg->type))
+ irq_flag |= LPRX_RD_RDY_INT_FLAG;
+
+ if (mtk_dsi_host_send_cmd(dsi, msg, irq_flag) < 0)
+ return -1;
+
+ if (!MTK_DSI_HOST_IS_READ(msg->type))
+ return 0;
+
+ if (!msg->rx_buf) {
+ dev_info(dsi->dev, "dsi receive buffer size may be NULL\n");
+ return -1;
+ }
+
+ for (i = 0; i < 16; i++)
+ *(read_data + i) = readb(dsi->regs + DSI_RX_DATA0 + i);
+
+ recv_cnt = mtk_dsi_recv_cnt(read_data[0], read_data);
+
+ if (recv_cnt > 2)
+ src_addr = &read_data[4];
+ else
+ src_addr = &read_data[1];
+
+ if (recv_cnt > 10)
+ recv_cnt = 10;
+
+ if (recv_cnt > msg->rx_len)
+ recv_cnt = msg->rx_len;
+
+ if (recv_cnt)
+ memcpy(msg->rx_buf, src_addr, recv_cnt);
+
+ dev_info(dsi->dev, "dsi get %d byte data from the panel address(0x%x)\n",
+ recv_cnt, *((u8 *)(msg->tx_buf)));
+
+ return recv_cnt;
+}
+
static const struct mipi_dsi_host_ops mtk_dsi_ops = {
.attach = mtk_dsi_host_attach,
.detach = mtk_dsi_host_detach,
+ .transfer = mtk_dsi_host_transfer,
};
static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
--
1.9.1
^ permalink raw reply related
* [PATCH v9 09/10] drm/mediatek: update DSI sub driver flow for sending commands to panel
From: YT Shen @ 2016-11-11 11:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478865346-19043-1-git-send-email-yt.shen@mediatek.com>
This patch update enable/disable flow of DSI module and MIPI TX module.
Original flow works on there is a bridge chip: DSI -> bridge -> panel.
In this case: DSI -> panel, the DSI sub driver flow should be updated.
We need to initialize DSI first so that we can send commands to panel.
Signed-off-by: shaoming chen <shaoming.chen@mediatek.com>
Signed-off-by: YT Shen <yt.shen@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 110 ++++++++++++++++++++++++++-------
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 32 +++++-----
2 files changed, 103 insertions(+), 39 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 860b84f..12a1206 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -94,6 +94,8 @@
#define DSI_RACK 0x84
#define RACK BIT(0)
+#define DSI_MEM_CONTI 0x90
+
#define DSI_PHY_LCCON 0x104
#define LC_HS_TX_EN BIT(0)
#define LC_ULPM_EN BIT(1)
@@ -126,6 +128,10 @@
#define CLK_HS_POST (0xff << 8)
#define CLK_HS_EXIT (0xff << 16)
+#define DSI_VM_CMD_CON 0x130
+#define VM_CMD_EN BIT(0)
+#define TS_VFP_EN BIT(5)
+
#define DSI_CMDQ0 0x180
#define CONFIG (0xff << 0)
#define SHORT_PACKET 0
@@ -219,12 +225,12 @@ static void mtk_dsi_phy_timconfig(struct mtk_dsi *dsi)
writel(timcon3, dsi->regs + DSI_PHY_TIMECON3);
}
-static void mtk_dsi_enable(struct mtk_dsi *dsi)
+static void mtk_dsi_engine_enable(struct mtk_dsi *dsi)
{
mtk_dsi_mask(dsi, DSI_CON_CTRL, DSI_EN, DSI_EN);
}
-static void mtk_dsi_disable(struct mtk_dsi *dsi)
+static void mtk_dsi_engine_disable(struct mtk_dsi *dsi)
{
mtk_dsi_mask(dsi, DSI_CON_CTRL, DSI_EN, 0);
}
@@ -249,7 +255,9 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
* mipi_ratio is mipi clk coefficient for balance the pixel clk in mipi.
* we set mipi_ratio is 1.05.
*/
- dsi->data_rate = dsi->vm.pixelclock * 3 * 21 / (1 * 1000 * 10);
+ dsi->data_rate = dsi->vm.pixelclock * 12 * 21;
+ dsi->data_rate /= (dsi->lanes * 1000 * 10);
+ dev_info(dev, "set mipitx's data rate: %dMHz\n", dsi->data_rate);
ret = clk_set_rate(dsi->hs_clk, dsi->data_rate * 1000000);
if (ret < 0) {
@@ -271,7 +279,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
goto err_disable_engine_clk;
}
- mtk_dsi_enable(dsi);
+ mtk_dsi_engine_enable(dsi);
mtk_dsi_reset_engine(dsi);
mtk_dsi_phy_timconfig(dsi);
@@ -289,7 +297,7 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
static void mtk_dsi_clk_ulp_mode_enter(struct mtk_dsi *dsi)
{
mtk_dsi_mask(dsi, DSI_PHY_LCCON, LC_HS_TX_EN, 0);
- mtk_dsi_mask(dsi, DSI_PHY_LCCON, LC_ULPM_EN, 0);
+ mtk_dsi_mask(dsi, DSI_PHY_LCCON, LC_ULPM_EN, LC_ULPM_EN);
}
static void mtk_dsi_clk_ulp_mode_leave(struct mtk_dsi *dsi)
@@ -302,7 +310,7 @@ static void mtk_dsi_clk_ulp_mode_leave(struct mtk_dsi *dsi)
static void mtk_dsi_lane0_ulp_mode_enter(struct mtk_dsi *dsi)
{
mtk_dsi_mask(dsi, DSI_PHY_LD0CON, LD0_HS_TX_EN, 0);
- mtk_dsi_mask(dsi, DSI_PHY_LD0CON, LD0_ULPM_EN, 0);
+ mtk_dsi_mask(dsi, DSI_PHY_LD0CON, LD0_ULPM_EN, LD0_ULPM_EN);
}
static void mtk_dsi_lane0_ulp_mode_leave(struct mtk_dsi *dsi)
@@ -338,11 +346,21 @@ static void mtk_dsi_set_mode(struct mtk_dsi *dsi)
if ((dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) &&
!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE))
vid_mode = BURST_MODE;
+ else
+ vid_mode = SYNC_EVENT_MODE;
}
writel(vid_mode, dsi->regs + DSI_MODE_CTRL);
}
+static void mtk_dsi_set_vm_cmd(struct mtk_dsi *dsi)
+{
+ writel(0x3c, dsi->regs + DSI_MEM_CONTI);
+
+ mtk_dsi_mask(dsi, DSI_VM_CMD_CON, VM_CMD_EN, VM_CMD_EN);
+ mtk_dsi_mask(dsi, DSI_VM_CMD_CON, TS_VFP_EN, TS_VFP_EN);
+}
+
static void mtk_dsi_ps_control_vact(struct mtk_dsi *dsi)
{
struct videomode *vm = &dsi->vm;
@@ -399,6 +417,9 @@ static void mtk_dsi_rxtx_control(struct mtk_dsi *dsi)
break;
}
+ tmp_reg |= (dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) << 6;
+ tmp_reg |= (dsi->mode_flags & MIPI_DSI_MODE_EOT_PACKET) >> 3;
+
writel(tmp_reg, dsi->regs + DSI_TXRX_CTRL);
}
@@ -477,6 +498,16 @@ static void mtk_dsi_start(struct mtk_dsi *dsi)
writel(1, dsi->regs + DSI_START);
}
+static void mtk_dsi_stop(struct mtk_dsi *dsi)
+{
+ writel(0, dsi->regs + DSI_START);
+}
+
+static void mtk_dsi_set_cmd_mode(struct mtk_dsi *dsi)
+{
+ writel(CMD_MODE, dsi->regs + DSI_MODE_CTRL);
+}
+
static void mtk_dsi_set_interrupt_enable(struct mtk_dsi *dsi)
{
u32 inten = LPRX_RD_RDY_INT_FLAG | CMD_DONE_INT_FLAG | VM_DONE_INT_FLAG;
@@ -506,7 +537,7 @@ static s32 mtk_dsi_wait_for_irq_done(struct mtk_dsi *dsi, u32 irq_flag,
if (ret == 0) {
dev_info(dsi->dev, "Wait DSI IRQ(0x%08x) Timeout\n", irq_flag);
- mtk_dsi_enable(dsi);
+ mtk_dsi_engine_enable(dsi);
mtk_dsi_reset_engine(dsi);
}
@@ -535,6 +566,17 @@ static irqreturn_t mtk_dsi_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static s32 mtk_dsi_switch_to_cmd_mode(struct mtk_dsi *dsi, u8 irq_flag, u32 t)
+{
+ mtk_dsi_irq_data_clear(dsi, irq_flag);
+ mtk_dsi_set_cmd_mode(dsi);
+
+ if (!mtk_dsi_wait_for_irq_done(dsi, irq_flag, t))
+ return -1;
+ else
+ return 0;
+}
+
static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
{
if (WARN_ON(dsi->refcount == 0))
@@ -543,11 +585,6 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
if (--dsi->refcount != 0)
return;
- mtk_dsi_lane0_ulp_mode_enter(dsi);
- mtk_dsi_clk_ulp_mode_enter(dsi);
-
- mtk_dsi_disable(dsi);
-
clk_disable_unprepare(dsi->engine_clk);
clk_disable_unprepare(dsi->digital_clk);
@@ -561,35 +598,45 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi)
if (dsi->enabled)
return;
- if (dsi->panel) {
- if (drm_panel_prepare(dsi->panel)) {
- DRM_ERROR("failed to setup the panel\n");
- return;
- }
- }
-
ret = mtk_dsi_poweron(dsi);
if (ret < 0) {
DRM_ERROR("failed to power on dsi\n");
return;
}
+ usleep_range(20000, 21000);
+
mtk_dsi_rxtx_control(dsi);
+ mtk_dsi_phy_timconfig(dsi);
+ mtk_dsi_ps_control_vact(dsi);
+ mtk_dsi_set_vm_cmd(dsi);
+ mtk_dsi_config_vdo_timing(dsi);
+ mtk_dsi_set_interrupt_enable(dsi);
+ mtk_dsi_engine_enable(dsi);
mtk_dsi_clk_ulp_mode_leave(dsi);
mtk_dsi_lane0_ulp_mode_leave(dsi);
mtk_dsi_clk_hs_mode(dsi, 0);
- mtk_dsi_set_mode(dsi);
- mtk_dsi_ps_control_vact(dsi);
- mtk_dsi_config_vdo_timing(dsi);
- mtk_dsi_set_interrupt_enable(dsi);
+ if (dsi->panel) {
+ if (drm_panel_prepare(dsi->panel)) {
+ DRM_ERROR("failed to prepare the panel\n");
+ return;
+ }
+ }
mtk_dsi_set_mode(dsi);
mtk_dsi_clk_hs_mode(dsi, 1);
mtk_dsi_start(dsi);
+ if (dsi->panel) {
+ if (drm_panel_enable(dsi->panel)) {
+ DRM_ERROR("failed to enable the panel\n");
+ return;
+ }
+ }
+
dsi->enabled = true;
}
@@ -605,6 +652,21 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
}
}
+ mtk_dsi_stop(dsi);
+ mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500);
+
+ if (dsi->panel) {
+ if (drm_panel_unprepare(dsi->panel)) {
+ DRM_ERROR("failed to unprepare the panel\n");
+ return;
+ }
+ }
+
+ mtk_dsi_reset_engine(dsi);
+ mtk_dsi_lane0_ulp_mode_enter(dsi);
+ mtk_dsi_clk_ulp_mode_enter(dsi);
+ mtk_dsi_engine_disable(dsi);
+
mtk_dsi_poweroff(dsi);
dsi->enabled = false;
@@ -845,7 +907,7 @@ static void mtk_dsi_wait_for_idle(struct mtk_dsi *dsi)
if (timeout_ms == 0) {
dev_info(dsi->dev, "polling dsi wait not busy timeout!\n");
- mtk_dsi_enable(dsi);
+ mtk_dsi_engine_enable(dsi);
mtk_dsi_reset_engine(dsi);
}
}
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
index 108d31a..34e95c6 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
@@ -177,7 +177,9 @@ static int mtk_mipi_tx_pll_prepare(struct clk_hw *hw)
dev_dbg(mipi_tx->dev, "prepare: %u Hz\n", mipi_tx->data_rate);
- if (mipi_tx->data_rate >= 500000000) {
+ if (mipi_tx->data_rate > 1250000000) {
+ return -EINVAL;
+ } else if (mipi_tx->data_rate >= 500000000) {
txdiv = 1;
txdiv0 = 0;
txdiv1 = 0;
@@ -201,6 +203,10 @@ static int mtk_mipi_tx_pll_prepare(struct clk_hw *hw)
return -EINVAL;
}
+ mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_TOP_CON,
+ RG_DSI_LNT_IMP_CAL_CODE | RG_DSI_LNT_HS_BIAS_EN,
+ (8 << 4) | RG_DSI_LNT_HS_BIAS_EN);
+
mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_BG_CON,
RG_DSI_VOUT_MSK |
RG_DSI_BG_CKEN | RG_DSI_BG_CORE_EN,
@@ -210,24 +216,18 @@ static int mtk_mipi_tx_pll_prepare(struct clk_hw *hw)
usleep_range(30, 100);
- mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_TOP_CON,
- RG_DSI_LNT_IMP_CAL_CODE | RG_DSI_LNT_HS_BIAS_EN,
- (8 << 4) | RG_DSI_LNT_HS_BIAS_EN);
-
- mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_CON,
- RG_DSI_CKG_LDOOUT_EN | RG_DSI_LDOCORE_EN);
+ mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_CON,
+ RG_DSI_CKG_LDOOUT_EN | RG_DSI_LDOCORE_EN,
+ RG_DSI_CKG_LDOOUT_EN | RG_DSI_LDOCORE_EN);
mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_PWR,
RG_DSI_MPPLL_SDM_PWR_ON |
RG_DSI_MPPLL_SDM_ISO_EN,
RG_DSI_MPPLL_SDM_PWR_ON);
- mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON0,
- RG_DSI_MPPLL_PLL_EN);
-
mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_CON0,
- RG_DSI_MPPLL_TXDIV0 | RG_DSI_MPPLL_TXDIV1 |
- RG_DSI_MPPLL_PREDIV,
+ RG_DSI_MPPLL_PREDIV | RG_DSI_MPPLL_TXDIV0 |
+ RG_DSI_MPPLL_TXDIV1 | RG_DSI_MPPLL_POSDIV,
(txdiv0 << 3) | (txdiv1 << 5));
/*
@@ -242,10 +242,12 @@ static int mtk_mipi_tx_pll_prepare(struct clk_hw *hw)
26000000);
writel(pcw, mipi_tx->regs + MIPITX_DSI_PLL_CON2);
- mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_PLL_CON1,
- RG_DSI_MPPLL_SDM_FRA_EN);
+ mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_CON1,
+ RG_DSI_MPPLL_SDM_FRA_EN,
+ RG_DSI_MPPLL_SDM_FRA_EN);
- mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_PLL_CON0, RG_DSI_MPPLL_PLL_EN);
+ mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_CON0,
+ RG_DSI_MPPLL_PLL_EN, RG_DSI_MPPLL_PLL_EN);
usleep_range(20, 100);
--
1.9.1
^ permalink raw reply related
* [PATCH v9 10/10] drm/mediatek: add support for Mediatek SoC MT2701
From: YT Shen @ 2016-11-11 11:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1478865346-19043-1-git-send-email-yt.shen@mediatek.com>
This patch add support for the Mediatek MT2701 DISP subsystem.
There is only one OVL engine in MT2701.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 6 ++++++
drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 6 ++++++
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 17 +++++++++++++++++
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 6 ++++++
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 29 +++++++++++++++++++++++++++++
drivers/gpu/drm/mediatek/mtk_dsi.c | 1 +
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 6 ++++++
7 files changed, 71 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 1139834..d174905 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -286,11 +286,17 @@ static int mtk_disp_ovl_remove(struct platform_device *pdev)
return 0;
}
+static const struct mtk_ddp_comp_driver_data mt2701_ovl_driver_data = {
+ .ovl = {0x0040, 1 << 12, 0}
+};
+
static const struct mtk_ddp_comp_driver_data mt8173_ovl_driver_data = {
.ovl = {0x0f40, 0, 1 << 12}
};
static const struct of_device_id mtk_disp_ovl_driver_dt_match[] = {
+ { .compatible = "mediatek,mt2701-disp-ovl",
+ .data = &mt2701_ovl_driver_data},
{ .compatible = "mediatek,mt8173-disp-ovl",
.data = &mt8173_ovl_driver_data},
{},
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
index b4225e2..5d363de 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
@@ -226,11 +226,17 @@ static int mtk_disp_rdma_remove(struct platform_device *pdev)
return 0;
}
+static const struct mtk_ddp_comp_driver_data mt2701_rdma_driver_data = {
+ .rdma_fifo_pseudo_size = SZ_4K,
+};
+
static const struct mtk_ddp_comp_driver_data mt8173_rdma_driver_data = {
.rdma_fifo_pseudo_size = SZ_8K,
};
static const struct of_device_id mtk_disp_rdma_driver_dt_match[] = {
+ { .compatible = "mediatek,mt2701-disp-rdma",
+ .data = &mt2701_rdma_driver_data},
{ .compatible = "mediatek,mt8173-disp-rdma",
.data = &mt8173_rdma_driver_data},
{},
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index a9b209c..8130f3d 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -60,6 +60,13 @@
#define MT8173_MUTEX_MOD_DISP_PWM1 BIT(24)
#define MT8173_MUTEX_MOD_DISP_OD BIT(25)
+#define MT2701_MUTEX_MOD_DISP_OVL BIT(3)
+#define MT2701_MUTEX_MOD_DISP_WDMA BIT(6)
+#define MT2701_MUTEX_MOD_DISP_COLOR BIT(7)
+#define MT2701_MUTEX_MOD_DISP_BLS BIT(9)
+#define MT2701_MUTEX_MOD_DISP_RDMA0 BIT(10)
+#define MT2701_MUTEX_MOD_DISP_RDMA1 BIT(12)
+
#define MUTEX_SOF_SINGLE_MODE 0
#define MUTEX_SOF_DSI0 1
#define MUTEX_SOF_DSI1 2
@@ -92,6 +99,15 @@ struct mtk_ddp {
const unsigned int *mutex_mod;
};
+static const unsigned int mt2701_mutex_mod[DDP_COMPONENT_ID_MAX] = {
+ [DDP_COMPONENT_BLS] = MT2701_MUTEX_MOD_DISP_BLS,
+ [DDP_COMPONENT_COLOR0] = MT2701_MUTEX_MOD_DISP_COLOR,
+ [DDP_COMPONENT_OVL0] = MT2701_MUTEX_MOD_DISP_OVL,
+ [DDP_COMPONENT_RDMA0] = MT2701_MUTEX_MOD_DISP_RDMA0,
+ [DDP_COMPONENT_RDMA1] = MT2701_MUTEX_MOD_DISP_RDMA1,
+ [DDP_COMPONENT_WDMA0] = MT2701_MUTEX_MOD_DISP_WDMA,
+};
+
static const unsigned int mt8173_mutex_mod[DDP_COMPONENT_ID_MAX] = {
[DDP_COMPONENT_AAL] = MT8173_MUTEX_MOD_DISP_AAL,
[DDP_COMPONENT_COLOR0] = MT8173_MUTEX_MOD_DISP_COLOR0,
@@ -390,6 +406,7 @@ static int mtk_ddp_remove(struct platform_device *pdev)
}
static const struct of_device_id ddp_driver_dt_match[] = {
+ { .compatible = "mediatek,mt2701-disp-mutex", .data = mt2701_mutex_mod},
{ .compatible = "mediatek,mt8173-disp-mutex", .data = mt8173_mutex_mod},
{},
};
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index b78b2e6..60d4783 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -265,11 +265,17 @@ struct mtk_ddp_comp_match {
[DDP_COMPONENT_WDMA1] = { MTK_DISP_WDMA, 1, NULL },
};
+static const struct mtk_ddp_comp_driver_data mt2701_color_driver_data = {
+ .color_offset = 0x0f00,
+};
+
static const struct mtk_ddp_comp_driver_data mt8173_color_driver_data = {
.color_offset = 0x0c00,
};
static const struct of_device_id mtk_disp_color_driver_dt_match[] = {
+ { .compatible = "mediatek,mt2701-disp-color",
+ .data = &mt2701_color_driver_data},
{ .compatible = "mediatek,mt8173-disp-color",
.data = &mt8173_color_driver_data},
{},
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index 5f9b5e8..f5cb6f0 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -126,6 +126,19 @@ static int mtk_atomic_commit(struct drm_device *drm,
.atomic_commit = mtk_atomic_commit,
};
+static const enum mtk_ddp_comp_id mt2701_mtk_ddp_main[] = {
+ DDP_COMPONENT_OVL0,
+ DDP_COMPONENT_RDMA0,
+ DDP_COMPONENT_COLOR0,
+ DDP_COMPONENT_BLS,
+ DDP_COMPONENT_DSI0,
+};
+
+static const enum mtk_ddp_comp_id mt2701_mtk_ddp_ext[] = {
+ DDP_COMPONENT_RDMA1,
+ DDP_COMPONENT_DPI0,
+};
+
static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
DDP_COMPONENT_OVL0,
DDP_COMPONENT_COLOR0,
@@ -145,6 +158,14 @@ static int mtk_atomic_commit(struct drm_device *drm,
DDP_COMPONENT_DPI0,
};
+static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data = {
+ .main_path = mt2701_mtk_ddp_main,
+ .main_len = ARRAY_SIZE(mt2701_mtk_ddp_main),
+ .ext_path = mt2701_mtk_ddp_ext,
+ .ext_len = ARRAY_SIZE(mt2701_mtk_ddp_ext),
+ .shadow_register = true,
+};
+
static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = {
.main_path = mt8173_mtk_ddp_main,
.main_len = ARRAY_SIZE(mt8173_mtk_ddp_main),
@@ -340,16 +361,22 @@ static void mtk_drm_unbind(struct device *dev)
};
static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
+ { .compatible = "mediatek,mt2701-disp-ovl", .data = (void *)MTK_DISP_OVL },
{ .compatible = "mediatek,mt8173-disp-ovl", .data = (void *)MTK_DISP_OVL },
+ { .compatible = "mediatek,mt2701-disp-rdma", .data = (void *)MTK_DISP_RDMA },
{ .compatible = "mediatek,mt8173-disp-rdma", .data = (void *)MTK_DISP_RDMA },
{ .compatible = "mediatek,mt8173-disp-wdma", .data = (void *)MTK_DISP_WDMA },
+ { .compatible = "mediatek,mt2701-disp-color", .data = (void *)MTK_DISP_COLOR },
{ .compatible = "mediatek,mt8173-disp-color", .data = (void *)MTK_DISP_COLOR },
{ .compatible = "mediatek,mt8173-disp-aal", .data = (void *)MTK_DISP_AAL},
{ .compatible = "mediatek,mt8173-disp-gamma", .data = (void *)MTK_DISP_GAMMA, },
{ .compatible = "mediatek,mt8173-disp-ufoe", .data = (void *)MTK_DISP_UFOE },
+ { .compatible = "mediatek,mt2701-dsi", .data = (void *)MTK_DSI },
{ .compatible = "mediatek,mt8173-dsi", .data = (void *)MTK_DSI },
{ .compatible = "mediatek,mt8173-dpi", .data = (void *)MTK_DPI },
+ { .compatible = "mediatek,mt2701-disp-mutex", .data = (void *)MTK_DISP_MUTEX },
{ .compatible = "mediatek,mt8173-disp-mutex", .data = (void *)MTK_DISP_MUTEX },
+ { .compatible = "mediatek,mt2701-disp-pwm", .data = (void *)MTK_DISP_BLS },
{ .compatible = "mediatek,mt8173-disp-pwm", .data = (void *)MTK_DISP_PWM },
{ .compatible = "mediatek,mt8173-disp-od", .data = (void *)MTK_DISP_OD },
{ }
@@ -522,6 +549,8 @@ static SIMPLE_DEV_PM_OPS(mtk_drm_pm_ops, mtk_drm_sys_suspend,
mtk_drm_sys_resume);
static const struct of_device_id mtk_drm_of_ids[] = {
+ { .compatible = "mediatek,mt2701-mmsys",
+ .data = &mt2701_mmsys_driver_data},
{ .compatible = "mediatek,mt8173-mmsys",
.data = &mt8173_mmsys_driver_data},
{ }
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 12a1206..fe9786c 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -1204,6 +1204,7 @@ static int mtk_dsi_remove(struct platform_device *pdev)
}
static const struct of_device_id mtk_dsi_of_match[] = {
+ { .compatible = "mediatek,mt2701-dsi" },
{ .compatible = "mediatek,mt8173-dsi" },
{ },
};
diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
index 34e95c6..944fb1d 100644
--- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
+++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
@@ -467,11 +467,17 @@ static int mtk_mipi_tx_remove(struct platform_device *pdev)
return 0;
}
+static const struct mtk_mipitx_data mt2701_mipitx_data = {
+ .data = (3 << 8)
+};
+
static const struct mtk_mipitx_data mt8173_mipitx_data = {
.data = (0 << 8)
};
static const struct of_device_id mtk_mipi_tx_match[] = {
+ { .compatible = "mediatek,mt2701-mipi-tx",
+ .data = &mt2701_mipitx_data },
{ .compatible = "mediatek,mt8173-mipi-tx",
.data = &mt8173_mipitx_data },
{},
--
1.9.1
^ permalink raw reply related
* [RESEND PATCH v1 02/11] dt-bindings: hisi: Add Hisilicon HiP05/06/07 Sysctrl and Djtag dts bindings
From: Anurup M @ 2016-11-11 11:59 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161111115346.GC11945@leverpostej>
On Friday 11 November 2016 05:23 PM, Mark Rutland wrote:
> On Fri, Nov 11, 2016 at 04:49:03PM +0530, Anurup M wrote:
>> On Thursday 10 November 2016 10:53 PM, Mark Rutland wrote:
>>> On Thu, Nov 03, 2016 at 01:41:58AM -0400, Anurup M wrote:
>>>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
>>>> +Example:
>>>> + /* for Hisilicon HiP05 djtag for CPU sysctrl */
>>>> + djtag0: djtag at 80010000 {
>>>> + compatible = "hisilicon,hip05-cpu-djtag-v1";
>>>> + reg = <0x0 0x80010000 0x0 0x10000>;
>>>> +
>>>> + /* For L3 cache PMU */
>>>> + pmul3c0 {
>>>> + compatible = "hisilicon,hisi-pmu-l3c-v1";
>>>> + scl-id = <0x02>;
>>>> + num-events = <0x16>;
>>>> + num-counters = <0x08>;
>>>> + module-id = <0x04>;
>>>> + num-banks = <0x04>;
>>>> + cfgen-map = <0x02 0x04 0x01 0x08>;
>>>> + counter-reg = <0x170>;
>>>> + evctrl-reg = <0x04>;
>>>> + event-en = <0x1000000>;
>>>> + evtype-reg = <0x140>;
>>>> + };
>>> This sub-node needs a binding document.
>>>
>>> These properties are completely opaque
>> The L3 cache PMU bindings are defined @bindings/arm/hisilicon/pmu.txt.
>> Is it OK that I document here(hisilicon/djtag.txt), a reference to
>> the PMU bindings doc ?
> At this point in the series, that file does not exist yet, and this is
> an undocumented beinding.
>
> Please introduce this sub-node long with the PMU bindings, later in the
> series.
Thanks, I got your suggestion. Will add this later in series.
> Thanks,
> Mark.
^ permalink raw reply
* PM regression with LED changes in next-20161109
From: Pavel Machek @ 2016-11-11 12:01 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <80b645e7-c3fa-8001-d9b1-c3c8c40394fd@gmail.com>
On Thu 2016-11-10 22:34:07, Jacek Anaszewski wrote:
> Hi,
>
> On 11/10/2016 09:29 PM, Pavel Machek wrote:
> >On Thu 2016-11-10 10:55:37, Tony Lindgren wrote:
> >>* Pavel Machek <pavel@ucw.cz> [161110 09:29]:
> >>>Hi!
> >>>
> >>>>>>>Looks like commit 883d32ce3385 ("leds: core: Add support for poll()ing
> >>>>>>>the sysfs brightness attr for changes.") breaks runtime PM for me.
> >>>>>>>
> >>>>>>>On my omap dm3730 based test system, idle power consumption is over 70
> >>>>>>>times higher now with this patch! It goes from about 6mW for the core
> >>>>>>>system to over 440mW during idle meaning there's some busy timer now
> >>>>>>>active.
> >>>>>>>
> >>>>>>>Reverting this patch fixes the issue. Any ideas?
> >>>
> >>>Are you using any LED that toggles with high frequency? Like perhaps
> >>>LED that is lit when CPU is active?
> >>
> >>Yeah one of them seems to have cpu0 as the default trigger.
> >
> >Aha. Its quite obvious we don't want to notify sysfs each time that
> >one is toggled, right?
> >
> >IMO brightness should display max brightness for the trigger, as Hans
> >suggested, anything else is madness for trigger such as cpu activity.
>
> Are you suggesting that we should revert changes introduced
> by below patch?
>
> commit 29d76dfa29fe22583aefddccda0bc56aa81035dc
> Author: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
> Date: Tue Mar 18 09:47:48 2008 +0000
>
> leds: Add support to leds with readable status
>
> Some led hardware allows drivers to query the led state, and this patch
> adds a hook to let the led class take advantage of that information when
> available.
>
> Without this functionality, when access to the led hardware is not
> exclusive (i.e. firmware or hardware might change its state behind the
> kernel's back), reality goes out of sync with the led class' idea of
> what
> the led is doing, which is annoying at best.
Hmm. So userland can read the LED state, and it can get _some_ value
back, but it can not know if it is current state or not.
I don't think that's a good interface. I see it is from 2008... is
someone using it? Maybe it is too late for revert.
But I'd certainly not extend it with poll.
IMO reading/polling should only be available with some triggers. It
does not make sense with "CPU load" trigger. It makes sense with
"keyboard light changeable by hardware" trigger.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161111/cdf0fc1a/attachment.sig>
^ permalink raw reply
* pull request: linux-firmware: Update Mediatek MT8173 VPU firmware
From: Andrew-CT Chen @ 2016-11-11 12:09 UTC (permalink / raw)
To: linux-arm-kernel
Hi linux-firmware maintainers,
The following changes since commit a179db97914da5e650c21ba8f9b0bae04a0f8a41:
amdgpu: update SMC firmware for VI parts (2016-10-05 10:30:11 -0700)
are available in the git repository at:
https://github.com/andrewct-chen/linux_fw_vpu_v1.0.3.git v1.0.3
for you to fetch changes up to f52fd5b4f156bd1eef672d29abbdc57cf310ac1b:
mediatek: update MT8173 VPU firmware for idle state (2016-11-11 19:34:56 +0800)
----------------------------------------------------------------
Andrew-CT Chen (1):
mediatek: update MT8173 VPU firmware for idle state
vpu_d.bin | Bin 4082928 -> 4082928 bytes
vpu_p.bin | Bin 131160 -> 131160 bytes
2 files changed, 0 insertions(+), 0 deletions(-)
^ permalink raw reply
* [PATCH] staging: vc04_services: Remove explicit NULL pointer
From: Maninder Singh @ 2016-11-11 12:16 UTC (permalink / raw)
To: linux-arm-kernel
Replace direct comparisons to NULL i.e.
'x == NULL' with '!x'
'x != NULL' with 'x'
Signed-off-by: Maninder Singh <maninder.s2@samsung.com>
---
.../vc04_services/interface/vchiq_arm/vchiq_arm.c | 32 ++++++++++----------
.../vc04_services/interface/vchiq_arm/vchiq_core.c | 4 +--
.../vc04_services/interface/vchiq_arm/vchiq_shim.c | 4 +--
.../vc04_services/interface/vchiq_arm/vchiq_util.c | 4 +--
4 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
index 8fcd940..0068a1c 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -533,7 +533,7 @@ struct vchiq_io_copy_callback_context {
/* Remove all services */
i = 0;
while ((service = next_service_by_instance(instance->state,
- instance, &i)) != NULL) {
+ instance, &i))) {
status = vchiq_remove_service(service->handle);
unlock_service(service);
if (status != VCHIQ_SUCCESS)
@@ -614,7 +614,7 @@ struct vchiq_io_copy_callback_context {
&args.params, srvstate,
instance, user_service_free);
- if (service != NULL) {
+ if (service) {
user_service->service = service;
user_service->userdata = userdata;
user_service->instance = instance;
@@ -661,7 +661,7 @@ struct vchiq_io_copy_callback_context {
VCHIQ_SERVICE_HANDLE_T handle = (VCHIQ_SERVICE_HANDLE_T)arg;
service = find_service_for_instance(instance, handle);
- if (service != NULL) {
+ if (service) {
USER_SERVICE_T *user_service =
(USER_SERVICE_T *)service->base.userdata;
/* close_pending is false on first entry, and when the
@@ -687,7 +687,7 @@ struct vchiq_io_copy_callback_context {
VCHIQ_SERVICE_HANDLE_T handle = (VCHIQ_SERVICE_HANDLE_T)arg;
service = find_service_for_instance(instance, handle);
- if (service != NULL) {
+ if (service) {
USER_SERVICE_T *user_service =
(USER_SERVICE_T *)service->base.userdata;
/* close_pending is false on first entry, and when the
@@ -714,7 +714,7 @@ struct vchiq_io_copy_callback_context {
VCHIQ_SERVICE_HANDLE_T handle = (VCHIQ_SERVICE_HANDLE_T)arg;
service = find_service_for_instance(instance, handle);
- if (service != NULL) {
+ if (service) {
status = (cmd == VCHIQ_IOC_USE_SERVICE) ?
vchiq_use_service_internal(service) :
vchiq_release_service_internal(service);
@@ -747,7 +747,7 @@ struct vchiq_io_copy_callback_context {
service = find_service_for_instance(instance, args.handle);
- if ((service != NULL) && (args.count <= MAX_ELEMENTS)) {
+ if (service && (args.count <= MAX_ELEMENTS)) {
/* Copy elements into kernel space */
VCHIQ_ELEMENT_T elements[MAX_ELEMENTS];
if (copy_from_user(elements, args.elements,
@@ -1063,7 +1063,7 @@ struct vchiq_io_copy_callback_context {
spin_unlock(&msg_queue_spinlock);
up(&user_service->remove_event);
- if (header == NULL)
+ if (!header)
ret = -ENOTCONN;
else if (header->size <= args.bufsize) {
/* Copy to user space if msgbuf is not NULL */
@@ -1161,7 +1161,7 @@ struct vchiq_io_copy_callback_context {
VCHIQ_SERVICE_HANDLE_T handle = (VCHIQ_SERVICE_HANDLE_T)arg;
service = find_closed_service_for_instance(instance, handle);
- if (service != NULL) {
+ if (service) {
USER_SERVICE_T *user_service =
(USER_SERVICE_T *)service->base.userdata;
close_delivered(user_service);
@@ -1305,7 +1305,7 @@ struct vchiq_io_copy_callback_context {
/* Mark all services for termination... */
i = 0;
while ((service = next_service_by_instance(state, instance,
- &i)) != NULL) {
+ &i))) {
USER_SERVICE_T *user_service = service->base.userdata;
/* Wake the slot handler if the msg queue is full. */
@@ -1317,8 +1317,8 @@ struct vchiq_io_copy_callback_context {
/* ...and wait for them to die */
i = 0;
- while ((service = next_service_by_instance(state, instance, &i))
- != NULL) {
+ while ((service = next_service_by_instance(state,
+ instance, &i))) {
USER_SERVICE_T *user_service = service->base.userdata;
down(&service->remove_event);
@@ -1560,7 +1560,7 @@ struct vchiq_io_copy_callback_context {
num_pages = (offset + num_bytes + PAGE_SIZE - 1) / PAGE_SIZE;
pages = kmalloc(sizeof(struct page *) * num_pages, GFP_KERNEL);
- if (pages == NULL) {
+ if (!pages) {
vchiq_log_error(vchiq_arm_log_level,
"Unable to allocation memory for %d pages\n",
num_pages);
@@ -1592,7 +1592,7 @@ struct vchiq_io_copy_callback_context {
if (page_idx != prev_idx) {
- if (page != NULL)
+ if (page)
kunmap(page);
page = pages[page_idx];
kmapped_virt_ptr = kmap(page);
@@ -1610,7 +1610,7 @@ struct vchiq_io_copy_callback_context {
}
out:
- if (page != NULL)
+ if (page)
kunmap(page);
for (page_idx = 0; page_idx < num_pages; page_idx++)
@@ -2659,7 +2659,7 @@ struct vchiq_io_copy_callback_context {
int use_count = 0, i;
i = 0;
while ((service = next_service_by_instance(instance->state,
- instance, &i)) != NULL) {
+ instance, &i))) {
use_count += service->service_use_count;
unlock_service(service);
}
@@ -2685,7 +2685,7 @@ struct vchiq_io_copy_callback_context {
int i;
i = 0;
while ((service = next_service_by_instance(instance->state,
- instance, &i)) != NULL) {
+ instance, &i))) {
service->trace = trace;
unlock_service(service);
}
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
index 7440db2..82f6496 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
@@ -3273,7 +3273,7 @@ static const char *msg_type_str(unsigned int msg_type)
if (!service ||
(service->srvstate != VCHIQ_SRVSTATE_OPEN) ||
- ((memhandle == VCHI_MEM_HANDLE_INVALID) && (offset == NULL)) ||
+ ((memhandle == VCHI_MEM_HANDLE_INVALID) && (!offset)) ||
(vchiq_check_service(service) != VCHIQ_SUCCESS))
goto error_exit;
@@ -3910,7 +3910,7 @@ void vchiq_log_dump_mem(const char *label, uint32_t addr, const void *void_mem,
}
*s++ = '\0';
- if ((label != NULL) && (*label != '\0'))
+ if (label && (*label != '\0'))
vchiq_log_trace(VCHIQ_LOG_TRACE,
"%s: %08x: %s", label, addr, line_buf);
else
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_shim.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_shim.c
index d977139..b6d0a75 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_shim.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_shim.c
@@ -639,7 +639,7 @@ int32_t vchi_service_open(VCHI_INSTANCE_T instance_handle,
}
}
- return (service != NULL) ? 0 : -1;
+ return (service) ? 0 : -1;
}
EXPORT_SYMBOL(vchi_service_open);
@@ -671,7 +671,7 @@ int32_t vchi_service_create(VCHI_INSTANCE_T instance_handle,
}
}
- return (service != NULL) ? 0 : -1;
+ return (service) ? 0 : -1;
}
EXPORT_SYMBOL(vchi_service_create);
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_util.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_util.c
index 384acb8..ac6a386 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_util.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_util.c
@@ -52,7 +52,7 @@ int vchiu_queue_init(VCHIU_QUEUE_T *queue, int size)
sema_init(&queue->push, 0);
queue->storage = kzalloc(size * sizeof(VCHIQ_HEADER_T *), GFP_KERNEL);
- if (queue->storage == NULL) {
+ if (!queue->storage) {
vchiu_queue_delete(queue);
return 0;
}
@@ -61,7 +61,7 @@ int vchiu_queue_init(VCHIU_QUEUE_T *queue, int size)
void vchiu_queue_delete(VCHIU_QUEUE_T *queue)
{
- if (queue->storage != NULL)
+ if (queue->storage)
kfree(queue->storage);
}
--
1.7.9.5
^ permalink raw reply related
* [PATCH v3] spi: spi-fsl-dspi: Add DMA support for Vybrid
From: Mark Brown @ 2016-11-11 12:20 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <836dd6a84fa149cafdbb0b53e792d305febf6207.1478778329.git.maitysanchayan@gmail.com>
On Thu, Nov 10, 2016 at 05:49:15PM +0530, Sanchayan Maity wrote:
A couple of small things, please send followup patches fixing them.
> + rx_word = is_double_byte_mode(dspi);
> +
> + len = rx_word ? (dma->curr_xfer_len / 2) : dma->curr_xfer_len;
Please use normal if statements, they're much easier to read.
> +err_slave_config:
> + devm_kfree(dev, dma->rx_dma_buf);
> +err_rx_dma_buf:
> + devm_kfree(dev, dma->tx_dma_buf);
You really shouldn't need to explicitly free things like this if you're
using devm_, especially in the error path from the probe function like
this where a failure is just going to result in the device failing to
instantiate so you won't have the allocation sitting around unused for
any length of time.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 455 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161111/6447812f/attachment.sig>
^ permalink raw reply
* [PATCH v2 2/4] dt-bindings: Add TI SCI PM Domains
From: Ulf Hansson @ 2016-11-11 12:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <90e91588-d2fc-19be-5a28-63c801a8d061@ti.com>
On 10 November 2016 at 20:56, Dave Gerlach <d-gerlach@ti.com> wrote:
> Rob, Ulf, Jon,
>
> On 10/27/2016 08:15 AM, Dave Gerlach wrote:
>>
>> +Jon
>> On 10/26/2016 04:59 PM, Rob Herring wrote:
>>>
>>> On Mon, Oct 24, 2016 at 12:00 PM, Kevin Hilman <khilman@baylibre.com>
>>> wrote:
>>>>
>>>> Dave Gerlach <d-gerlach@ti.com> writes:
>>>>
>>>>> Hi,
>>>>> On 10/21/2016 01:48 PM, Kevin Hilman wrote:
>>>>>>
>>>>>> Dave Gerlach <d-gerlach@ti.com> writes:
>>>>>>
>>>>>>> Add a generic power domain implementation, TI SCI PM Domains, that
>>>>>>> will hook into the genpd framework and allow the TI SCI protocol to
>>>>>>> control device power states.
>>>>>>>
>>>>>>> Also, provide macros representing each device index as understood
>>>>>>> by TI SCI to be used in the device node power-domain references.
>>>>>>> These are identifiers for the K2G devices managed by the PMMC.
>>>>>>>
>>>>>>> Signed-off-by: Nishanth Menon <nm@ti.com>
>>>>>>> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
>>>>>>> ---
>>>>>>> .../devicetree/bindings/soc/ti/sci-pm-domain.txt | 54
>>>>>>> +++++++++++++
>>>>>>> MAINTAINERS | 2 +
>>>>>>> include/dt-bindings/genpd/k2g.h | 90
>>>>>>> ++++++++++++++++++++++
>>>>>>> 3 files changed, 146 insertions(+)
>>>>>>> create mode 100644
>>>>>>> Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>>>> create mode 100644 include/dt-bindings/genpd/k2g.h
>>>>>>>
>>>>>>> diff --git
>>>>>>> a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>>>> b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>>>> new file mode 100644
>>>>>>> index 000000000000..32f38a349656
>>>>>>> --- /dev/null
>>>>>>> +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
>>>>>>> @@ -0,0 +1,54 @@
>>>>>>> +Texas Instruments TI-SCI Generic Power Domain
>>>>>>> +---------------------------------------------
>>>>>>> +
>>>>>>> +Some TI SoCs contain a system controller (like the PMMC, etc...)
>>>>>>> that is
>>>>>>> +responsible for controlling the state of the IPs that are present.
>>>>>>> +Communication between the host processor running an OS and the
>>>>>>> system
>>>>>>> +controller happens through a protocol known as TI-SCI [1]. This pm
>>>>>>> domain
>>>>>>> +implementation plugs into the generic pm domain framework and makes
>>>>>>> use of
>>>>>>> +the TI SCI protocol power on and off each device when needed.
>>>>>>> +
>>>>>>> +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
>>>>>>> +
>>>>>>> +PM Domain Node
>>>>>>> +==============
>>>>>>> +The PM domain node represents the global PM domain managed by the
>>>>>>> PMMC,
>>>>>>> +which in this case is the single implementation as documented by the
>>>>>>> generic
>>>>>>> +PM domain bindings in
>>>>>>> Documentation/devicetree/bindings/power/power_domain.txt.
>>>>>>> +
>>>>>>> +Required Properties:
>>>>>>> +--------------------
>>>>>>> +- compatible: should be "ti,sci-pm-domain"
>>>>>>> +- #power-domain-cells: Must be 0.
>>>>>>> +- ti,sci: Phandle to the TI SCI device to use for managing the
>>>>>>> devices.
>>>>>>>
>>>>>>> +Example:
>>>>>>> +--------------------
>>>>>>> +k2g_pds: k2g_pds {
>>>>>>
>>>>>>
>>>>>> should use generic name like "power-contoller", e.g. k2g_pds:
>>>>>> power-controller
>>>>>
>>>>>
>>>>> Ok, that makes more sense.
>>>>>
>>>>>>
>>>>>>> + compatible = "ti,sci-pm-domain";
>>>>>>> + #power-domain-cells = <0>;
>>>>>>> + ti,sci = <&pmmc>;
>>>>>>> +};
>>>>>>> +
>>>>>>> +PM Domain Consumers
>>>>>>> +===================
>>>>>>> +Hardware blocks that require SCI control over their state must
>>>>>>> provide
>>>>>>> +a reference to the sci-pm-domain they are part of and a unique
>>>>>>> device
>>>>>>> +specific ID that identifies the device.
>>>>>>> +
>>>>>>> +Required Properties:
>>>>>>> +--------------------
>>>>>>> +- power-domains: phandle pointing to the corresponding PM domain
>>>>>>> node.
>>>>>>> +- ti,sci-id: index representing the device id to be passed oevr SCI
>>>>>>> to
>>>>>>> + be used for device control.
>>>>>>
>>>>>>
>>>>>> This ID doesn't look right.
>>>>>>
>>>>>> Why not use #power-domain-cells = <1> and pass the index in the DT?
>>>>>> ...
>>>
>>>
>>> Exactly. ti,sci-id is a NAK for me.
>>
>>
>> I was told not to use the onecell during v1 discussion. I agree this would
>> be
>> ideal but I cannot due to what the bindings represent, the phandle
>> parameter is
>> an index into a list of genpds, whereas we need an actual ID number we can
>> use
>> and I do not have the ability to get that from the phandle.
>>
>> @Ulf/Jon, is there any hope of bringing back custom xlate functions for
>> genpd
>> providers? I don't have a good background on why it was even removed. I
>> can
>> maintain a single genpd for all devices but I need a way to parse this ID,
>> whether it's from a separate property or a phandle. It is locked now to
>> indexing
>> into a list of genpds but I need additional per device information for
>> devices
>> bound to a genpd and I need either a custom parameter or the ability to
>> parse
>> the phandle myself.
>>
>
> Any comments here? The meaning of the phandle onecell is fixed in the genpd
> framework so I'm not sure how we want to move forward with this, I need to
> pass a power domain ID to the genpd driver, and if this shouldn't be a new
> property I'm not sure what direction we should take.
>
> Regards,
> Dave
>
>
>>>
>>>>>>
>>>>>>> +See dt-bindings/genpd/k2g.h for the list of valid identifiers for
>>>>>>> k2g.
>>>>>>> +
>>>>>>> +Example:
>>>>>>> +--------------------
>>>>>>> +uart0: serial at 02530c00 {
>>>>>>> + compatible = "ns16550a";
>>>>>>> + ...
>>>>>>> + power-domains = <&k2g_pds>;
>>>>>>> + ti,sci-id = <K2G_DEV_UART0>;
>>>>>>
>>>>>>
>>>>>> ... like this:
>>>>>>
>>>>>> power-domains = <&k2g_pds K2G_DEV_UART0>;
>>>>>
>>>>>
>>>>> That's how I did it in version one actually. I was able to define my
>>>>> own xlate function to parse the phandle and get that index, but Ulf
>>>>> pointed me to this series by Jon Hunter [1] that simplified genpd
>>>>> providers and dropped the concept of adding your own xlate. This locks
>>>>> the onecell approach to using a fixed static array of genpds that get
>>>>> indexed into (without passing the index to the provider, just the
>>>>> genpd that's looked up), which doesn't fit our usecase, as we don't
>>>>> want a 1 to 1 genpd to device mapping based on the comments provided
>>>>> in v1. Now we just use the genpd device attach/detach hooks to parse
>>>>> the sci-id and then use it in the genpd device start/stop hooks.
>>>
>>>
>>> I have no idea what any of this means. All sounds like driver
>>> architecture, not anything to do with bindings.
>>
>>
>> This was a response to Kevin, not part of binding description.
>>
>>>
>>>>
>>>> Ah, right. I remember now. This approach allows you to use a single
>>>> genpd as discussed earlier.
>>>>
>>>> Makes sense now, suggestion retracted.
>>>
>>>
>>> IIRC, the bindings in Jon's case had a node for each domain and didn't
>>> need any additional property.
>>
>>
>> Yes but we only have one domain and index into it, not into a list of
>> domains,
Exactly. And this my main point as well. We are not talking about a
domain property but a device property.
>> so the additional property is solving a different problem.
Yes.
Perhaps you could try to elaborate about what the TI SCI ID really
represents for the device, as to help Rob understand the bigger
picture?
To me, the TI SCI ID, is similar to a "conid" for any another "device
resource" (like clock, pinctrl, regulator etc) which we can describe
in DT and assign to a device node. The only difference here, is that
we don't have common API to fetch the resource (like clk_get(),
regulator_get()), but instead we fetches the device's resource from
SoC specific code, via genpd's device ->attach() callback.
Hope that helps.
Kind regards
Uffe
^ permalink raw reply
* [PATCH v7 00/16] ACPI IORT ARM SMMU support
From: Hanjun Guo @ 2016-11-11 12:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161109141948.19244-1-lorenzo.pieralisi@arm.com>
On 11/09/2016 10:19 PM, Lorenzo Pieralisi wrote:
> This patch series is v7 of a previous posting:
>
> https://lkml.org/lkml/2016/10/18/506
>
> v6 -> v7
> - Rebased against v4.9-rc4
> - Fixed IORT probing on ACPI systems with missing IORT table
> - Fixed SMMUv1/v2 global interrupt detection
> - Updated iommu_ops firmware look-up
Although no major update for the new version, I tested
this patchset again on hisilicon d03, and the platform
device works as before with SMMUv3.
Thanks
Hanjun
^ permalink raw reply
* [PATCH] arm64: dts: Add ARM PMU node for exynos7
From: Alim Akhtar @ 2016-11-11 13:01 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <4922ada9-2eb2-f0cf-e4b1-a74f4397f97c@arm.com>
Hi Robin,
On 11/10/2016 07:07 PM, Robin Murphy wrote:
> Hi Alim,
>
> On 10/11/16 03:30, Alim Akhtar wrote:
>> This patch adds ARM Performance Monitor Unit dt node for exynos7.
>> PMU provides various statistics on the operation of the CPU and
>> memory system at runtime, which are very useful when debugging or
>> profiling code. This enables the same.
>>
>> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
>> ---
>> arch/arm64/boot/dts/exynos/exynos7.dtsi | 8 ++++++++
>> 1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
>> index e0d0d01..53ce4be 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
>> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
>> @@ -472,6 +472,14 @@
>> status = "disabled";
>> };
>>
>> + arm-pmu {
>> + compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3";
>> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
>
> Per Documentation/devicetree/bindings/arm/pmu.txt there should also be
> an "interrupt-affinity" property describing which SPI belongs to which core.
>
Thanks for review, will resend after adding "interrupt-affinity" property.
> Robin.
>
>> + };
>> +
>> timer {
>> compatible = "arm,armv8-timer";
>> interrupts = <GIC_PPI 13
>>
>
>
>
>
^ permalink raw reply
* Applied "spi: spi-fsl-dspi: Add DMA support for Vybrid" to the spi tree
From: Mark Brown @ 2016-11-11 13:05 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <836dd6a84fa149cafdbb0b53e792d305febf6207.1478778329.git.maitysanchayan@gmail.com>
The patch
spi: spi-fsl-dspi: Add DMA support for Vybrid
has been applied to the spi tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 90ba37033cb94207e97c4ced9be575770438213b Mon Sep 17 00:00:00 2001
From: Sanchayan Maity <maitysanchayan@gmail.com>
Date: Thu, 10 Nov 2016 17:49:15 +0530
Subject: [PATCH] spi: spi-fsl-dspi: Add DMA support for Vybrid
Add DMA support for Vybrid.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-fsl-dspi.c | 301 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 300 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 35c0dd945668..bc64700b514d 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -15,6 +15,8 @@
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
@@ -40,6 +42,7 @@
#define TRAN_STATE_WORD_ODD_NUM 0x04
#define DSPI_FIFO_SIZE 4
+#define DSPI_DMA_BUFSIZE (DSPI_FIFO_SIZE * 1024)
#define SPI_MCR 0x00
#define SPI_MCR_MASTER (1 << 31)
@@ -71,6 +74,11 @@
#define SPI_SR_EOQF 0x10000000
#define SPI_SR_TCFQF 0x80000000
+#define SPI_RSER_TFFFE BIT(25)
+#define SPI_RSER_TFFFD BIT(24)
+#define SPI_RSER_RFDFE BIT(17)
+#define SPI_RSER_RFDFD BIT(16)
+
#define SPI_RSER 0x30
#define SPI_RSER_EOQFE 0x10000000
#define SPI_RSER_TCFQE 0x80000000
@@ -108,6 +116,8 @@
#define SPI_TCR_TCNT_MAX 0x10000
+#define DMA_COMPLETION_TIMEOUT msecs_to_jiffies(3000)
+
struct chip_data {
u32 mcr_val;
u32 ctar_val;
@@ -117,6 +127,7 @@ struct chip_data {
enum dspi_trans_mode {
DSPI_EOQ_MODE = 0,
DSPI_TCFQ_MODE,
+ DSPI_DMA_MODE,
};
struct fsl_dspi_devtype_data {
@@ -125,7 +136,7 @@ struct fsl_dspi_devtype_data {
};
static const struct fsl_dspi_devtype_data vf610_data = {
- .trans_mode = DSPI_EOQ_MODE,
+ .trans_mode = DSPI_DMA_MODE,
.max_clock_factor = 2,
};
@@ -139,6 +150,22 @@ static const struct fsl_dspi_devtype_data ls2085a_data = {
.max_clock_factor = 8,
};
+struct fsl_dspi_dma {
+ u32 curr_xfer_len;
+
+ u32 *tx_dma_buf;
+ struct dma_chan *chan_tx;
+ dma_addr_t tx_dma_phys;
+ struct completion cmd_tx_complete;
+ struct dma_async_tx_descriptor *tx_desc;
+
+ u32 *rx_dma_buf;
+ struct dma_chan *chan_rx;
+ dma_addr_t rx_dma_phys;
+ struct completion cmd_rx_complete;
+ struct dma_async_tx_descriptor *rx_desc;
+};
+
struct fsl_dspi {
struct spi_master *master;
struct platform_device *pdev;
@@ -165,6 +192,7 @@ struct fsl_dspi {
u32 waitflags;
u32 spi_tcnt;
+ struct fsl_dspi_dma *dma;
};
static inline int is_double_byte_mode(struct fsl_dspi *dspi)
@@ -176,6 +204,263 @@ static inline int is_double_byte_mode(struct fsl_dspi *dspi)
return ((val & SPI_FRAME_BITS_MASK) == SPI_FRAME_BITS(8)) ? 0 : 1;
}
+static void dspi_tx_dma_callback(void *arg)
+{
+ struct fsl_dspi *dspi = arg;
+ struct fsl_dspi_dma *dma = dspi->dma;
+
+ complete(&dma->cmd_tx_complete);
+}
+
+static void dspi_rx_dma_callback(void *arg)
+{
+ struct fsl_dspi *dspi = arg;
+ struct fsl_dspi_dma *dma = dspi->dma;
+ int rx_word;
+ int i, len;
+ u16 d;
+
+ rx_word = is_double_byte_mode(dspi);
+
+ len = rx_word ? (dma->curr_xfer_len / 2) : dma->curr_xfer_len;
+
+ if (!(dspi->dataflags & TRAN_STATE_RX_VOID)) {
+ for (i = 0; i < len; i++) {
+ d = dspi->dma->rx_dma_buf[i];
+ rx_word ? (*(u16 *)dspi->rx = d) :
+ (*(u8 *)dspi->rx = d);
+ dspi->rx += rx_word + 1;
+ }
+ }
+
+ complete(&dma->cmd_rx_complete);
+}
+
+static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi)
+{
+ struct fsl_dspi_dma *dma = dspi->dma;
+ struct device *dev = &dspi->pdev->dev;
+ int time_left;
+ int tx_word;
+ int i, len;
+ u16 val;
+
+ tx_word = is_double_byte_mode(dspi);
+
+ len = tx_word ? (dma->curr_xfer_len / 2) : dma->curr_xfer_len;
+
+ for (i = 0; i < len - 1; i++) {
+ val = tx_word ? *(u16 *) dspi->tx : *(u8 *) dspi->tx;
+ dspi->dma->tx_dma_buf[i] =
+ SPI_PUSHR_TXDATA(val) | SPI_PUSHR_PCS(dspi->cs) |
+ SPI_PUSHR_CTAS(0) | SPI_PUSHR_CONT;
+ dspi->tx += tx_word + 1;
+ }
+
+ val = tx_word ? *(u16 *) dspi->tx : *(u8 *) dspi->tx;
+ dspi->dma->tx_dma_buf[i] = SPI_PUSHR_TXDATA(val) |
+ SPI_PUSHR_PCS(dspi->cs) |
+ SPI_PUSHR_CTAS(0);
+ dspi->tx += tx_word + 1;
+
+ dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx,
+ dma->tx_dma_phys,
+ DSPI_DMA_BUFSIZE, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!dma->tx_desc) {
+ dev_err(dev, "Not able to get desc for DMA xfer\n");
+ return -EIO;
+ }
+
+ dma->tx_desc->callback = dspi_tx_dma_callback;
+ dma->tx_desc->callback_param = dspi;
+ if (dma_submit_error(dmaengine_submit(dma->tx_desc))) {
+ dev_err(dev, "DMA submit failed\n");
+ return -EINVAL;
+ }
+
+ dma->rx_desc = dmaengine_prep_slave_single(dma->chan_rx,
+ dma->rx_dma_phys,
+ DSPI_DMA_BUFSIZE, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!dma->rx_desc) {
+ dev_err(dev, "Not able to get desc for DMA xfer\n");
+ return -EIO;
+ }
+
+ dma->rx_desc->callback = dspi_rx_dma_callback;
+ dma->rx_desc->callback_param = dspi;
+ if (dma_submit_error(dmaengine_submit(dma->rx_desc))) {
+ dev_err(dev, "DMA submit failed\n");
+ return -EINVAL;
+ }
+
+ reinit_completion(&dspi->dma->cmd_rx_complete);
+ reinit_completion(&dspi->dma->cmd_tx_complete);
+
+ dma_async_issue_pending(dma->chan_rx);
+ dma_async_issue_pending(dma->chan_tx);
+
+ time_left = wait_for_completion_timeout(&dspi->dma->cmd_tx_complete,
+ DMA_COMPLETION_TIMEOUT);
+ if (time_left == 0) {
+ dev_err(dev, "DMA tx timeout\n");
+ dmaengine_terminate_all(dma->chan_tx);
+ dmaengine_terminate_all(dma->chan_rx);
+ return -ETIMEDOUT;
+ }
+
+ time_left = wait_for_completion_timeout(&dspi->dma->cmd_rx_complete,
+ DMA_COMPLETION_TIMEOUT);
+ if (time_left == 0) {
+ dev_err(dev, "DMA rx timeout\n");
+ dmaengine_terminate_all(dma->chan_tx);
+ dmaengine_terminate_all(dma->chan_rx);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int dspi_dma_xfer(struct fsl_dspi *dspi)
+{
+ struct fsl_dspi_dma *dma = dspi->dma;
+ struct device *dev = &dspi->pdev->dev;
+ int curr_remaining_bytes;
+ int bytes_per_buffer;
+ int tx_word;
+ int ret = 0;
+
+ tx_word = is_double_byte_mode(dspi);
+ curr_remaining_bytes = dspi->len;
+ while (curr_remaining_bytes) {
+ /* Check if current transfer fits the DMA buffer */
+ dma->curr_xfer_len = curr_remaining_bytes;
+ bytes_per_buffer = DSPI_DMA_BUFSIZE /
+ (DSPI_FIFO_SIZE / (tx_word ? 2 : 1));
+ if (curr_remaining_bytes > bytes_per_buffer)
+ dma->curr_xfer_len = bytes_per_buffer;
+
+ ret = dspi_next_xfer_dma_submit(dspi);
+ if (ret) {
+ dev_err(dev, "DMA transfer failed\n");
+ goto exit;
+
+ } else {
+ curr_remaining_bytes -= dma->curr_xfer_len;
+ if (curr_remaining_bytes < 0)
+ curr_remaining_bytes = 0;
+ dspi->len = curr_remaining_bytes;
+ }
+ }
+
+exit:
+ return ret;
+}
+
+static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
+{
+ struct fsl_dspi_dma *dma;
+ struct dma_slave_config cfg;
+ struct device *dev = &dspi->pdev->dev;
+ int ret;
+
+ dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
+ if (!dma)
+ return -ENOMEM;
+
+ dma->chan_rx = dma_request_slave_channel(dev, "rx");
+ if (!dma->chan_rx) {
+ dev_err(dev, "rx dma channel not available\n");
+ ret = -ENODEV;
+ return ret;
+ }
+
+ dma->chan_tx = dma_request_slave_channel(dev, "tx");
+ if (!dma->chan_tx) {
+ dev_err(dev, "tx dma channel not available\n");
+ ret = -ENODEV;
+ goto err_tx_channel;
+ }
+
+ dma->tx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
+ &dma->tx_dma_phys, GFP_KERNEL);
+ if (!dma->tx_dma_buf) {
+ ret = -ENOMEM;
+ goto err_tx_dma_buf;
+ }
+
+ dma->rx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
+ &dma->rx_dma_phys, GFP_KERNEL);
+ if (!dma->rx_dma_buf) {
+ ret = -ENOMEM;
+ goto err_rx_dma_buf;
+ }
+
+ cfg.src_addr = phy_addr + SPI_POPR;
+ cfg.dst_addr = phy_addr + SPI_PUSHR;
+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ cfg.src_maxburst = 1;
+ cfg.dst_maxburst = 1;
+
+ cfg.direction = DMA_DEV_TO_MEM;
+ ret = dmaengine_slave_config(dma->chan_rx, &cfg);
+ if (ret) {
+ dev_err(dev, "can't configure rx dma channel\n");
+ ret = -EINVAL;
+ goto err_slave_config;
+ }
+
+ cfg.direction = DMA_MEM_TO_DEV;
+ ret = dmaengine_slave_config(dma->chan_tx, &cfg);
+ if (ret) {
+ dev_err(dev, "can't configure tx dma channel\n");
+ ret = -EINVAL;
+ goto err_slave_config;
+ }
+
+ dspi->dma = dma;
+ init_completion(&dma->cmd_tx_complete);
+ init_completion(&dma->cmd_rx_complete);
+
+ return 0;
+
+err_slave_config:
+ devm_kfree(dev, dma->rx_dma_buf);
+err_rx_dma_buf:
+ devm_kfree(dev, dma->tx_dma_buf);
+err_tx_dma_buf:
+ dma_release_channel(dma->chan_tx);
+err_tx_channel:
+ dma_release_channel(dma->chan_rx);
+
+ devm_kfree(dev, dma);
+ dspi->dma = NULL;
+
+ return ret;
+}
+
+static void dspi_release_dma(struct fsl_dspi *dspi)
+{
+ struct fsl_dspi_dma *dma = dspi->dma;
+ struct device *dev = &dspi->pdev->dev;
+
+ if (dma) {
+ if (dma->chan_tx) {
+ dma_unmap_single(dev, dma->tx_dma_phys,
+ DSPI_DMA_BUFSIZE, DMA_TO_DEVICE);
+ dma_release_channel(dma->chan_tx);
+ }
+
+ if (dma->chan_rx) {
+ dma_unmap_single(dev, dma->rx_dma_phys,
+ DSPI_DMA_BUFSIZE, DMA_FROM_DEVICE);
+ dma_release_channel(dma->chan_rx);
+ }
+ }
+}
+
static void hz_to_spi_baud(char *pbr, char *br, int speed_hz,
unsigned long clkrate)
{
@@ -424,6 +709,12 @@ static int dspi_transfer_one_message(struct spi_master *master,
regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_TCFQE);
dspi_tcfq_write(dspi);
break;
+ case DSPI_DMA_MODE:
+ regmap_write(dspi->regmap, SPI_RSER,
+ SPI_RSER_TFFFE | SPI_RSER_TFFFD |
+ SPI_RSER_RFDFE | SPI_RSER_RFDFD);
+ status = dspi_dma_xfer(dspi);
+ goto out;
default:
dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
trans_mode);
@@ -733,6 +1024,13 @@ static int dspi_probe(struct platform_device *pdev)
if (ret)
goto out_master_put;
+ if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
+ if (dspi_request_dma(dspi, res->start)) {
+ dev_err(&pdev->dev, "can't get dma channels\n");
+ goto out_clk_put;
+ }
+ }
+
master->max_speed_hz =
clk_get_rate(dspi->clk) / dspi->devtype_data->max_clock_factor;
@@ -761,6 +1059,7 @@ static int dspi_remove(struct platform_device *pdev)
struct fsl_dspi *dspi = spi_master_get_devdata(master);
/* Disconnect from the SPI framework */
+ dspi_release_dma(dspi);
clk_disable_unprepare(dspi->clk);
spi_unregister_master(dspi->master);
--
2.10.2
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox