* [PATCH v3 1/1] KVM: ARM64: Fix the issues when guest PMCCFILTR is configured
From: Will Deacon @ 2016-11-17 13:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1479316160-8567-1-git-send-email-wei@redhat.com>
On Wed, Nov 16, 2016 at 11:09:20AM -0600, Wei Huang wrote:
> KVM calls kvm_pmu_set_counter_event_type() when PMCCFILTR is configured.
> But this function can't deals with PMCCFILTR correctly because the evtCount
> bits of PMCCFILTR, which is reserved 0, conflits with the SW_INCR event
> type of other PMXEVTYPER<n> registers. To fix it, when eventsel == 0, this
> function shouldn't return immediately; instead it needs to check further
> if select_idx is ARMV8_PMU_CYCLE_IDX.
>
> Another issue is that KVM shouldn't copy the eventsel bits of PMCCFILTER
> blindly to attr.config. Instead it ought to convert the request to the
> "cpu cycle" event type (i.e. 0x11).
>
> To support this patch and to prevent duplicated definitions, a limited
> set of ARMv8 perf event types were relocated from perf_event.c to
> asm/perf_event.h.
>
> Signed-off-by: Wei Huang <wei@redhat.com>
> ---
> arch/arm64/include/asm/perf_event.h | 10 +++++++++-
> arch/arm64/kernel/perf_event.c | 10 +---------
> virt/kvm/arm/pmu.c | 8 +++++---
> 3 files changed, 15 insertions(+), 13 deletions(-)
Acked-by: Will Deacon <will.deacon@arm.com>
I'm assuming this will go via kvm-arm.
Will
^ permalink raw reply
* [GIT PULL] Second Round of Renesas ARM Based SoC Updates for v4.10
From: Simon Horman @ 2016-11-17 13:34 UTC (permalink / raw)
To: linux-arm-kernel
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these second round of Renesas ARM based SoC updates for v4.10.
This pull request is based on the previous round of
such requests, tagged as renesas-soc-for-v4.10,
which I have already sent a pull-request for.
The following changes since commit 9652623f8f019edc93a7a934a10b7d0b90421d5a:
ARM: shmobile: r8a7779/marzen: Add board part number to DT bindings (2016-11-04 10:25:45 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc2-for-v4.10
for you to fetch changes up to 4af239175d00c1866cc6b41f3eabcf93c45dcc40:
ARM: shmobile: document SK-RZG1E board (2016-11-15 10:59:35 +0100)
----------------------------------------------------------------
Second Round of Renesas ARM Based SoC Updates for v4.10
* Basic support for r8a7745 SoC
----------------------------------------------------------------
Sergei Shtylyov (2):
ARM: shmobile: r8a7745: basic SoC support
ARM: shmobile: document SK-RZG1E board
Documentation/devicetree/bindings/arm/shmobile.txt | 4 ++++
arch/arm/mach-shmobile/Kconfig | 4 ++++
arch/arm/mach-shmobile/setup-rcar-gen2.c | 1 +
3 files changed, 9 insertions(+)
^ permalink raw reply
* [PATCH 1/2] ARM: shmobile: r8a7745: basic SoC support
From: Simon Horman @ 2016-11-17 13:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479387356.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Add minimal support for the RZ/G1E (R8A7745) SoC.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++
arch/arm/mach-shmobile/Kconfig | 4 ++++
arch/arm/mach-shmobile/setup-rcar-gen2.c | 1 +
3 files changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 9a60cb38cf56..0af01f9a01f4 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -15,6 +15,8 @@ SoCs:
compatible = "renesas,r8a7740"
- RZ/G1M (R8A77430)
compatible = "renesas,r8a7743"
+ - RZ/G1E (R8A77450)
+ compatible = "renesas,r8a7745"
- R-Car M1A (R8A77781)
compatible = "renesas,r8a7778"
- R-Car H1 (R8A77790)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 6fbd9b7d2d67..f0b5e7dfa6d0 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -73,6 +73,10 @@ config ARCH_R8A7743
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
+config ARCH_R8A7745
+ bool "RZ/G1E (R8A77450)"
+ select ARCH_RCAR_GEN2
+
config ARCH_R8A7778
bool "R-Car M1A (R8A77781)"
select ARCH_RCAR_GEN1
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index d6b4841e51a9..14c1f0ed2ecb 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -235,6 +235,7 @@ MACHINE_END
static const char * const rz_g1_boards_compat_dt[] __initconst = {
"renesas,r8a7743",
+ "renesas,r8a7745",
NULL,
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 2/2] ARM: shmobile: document SK-RZG1E board
From: Simon Horman @ 2016-11-17 13:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479387356.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Document the SK-RZG1E device tree bindings, listing it as a supported board.
This allows to use checkpatch.pl to validate .dts files referring to the
SK-RZG1E board.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 0af01f9a01f4..3c7acf22957a 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -77,6 +77,8 @@ Boards:
compatible = "renesas,salvator-x", "renesas,r8a7796";
- SILK (RTP0RC7794LCB00011S)
compatible = "renesas,silk", "renesas,r8a7794"
+ - SK-RZG1E (YR8A77450S000BE)
+ compatible = "renesas,sk-rzg1e", "renesas,r8a7745"
- SK-RZG1M (YR8A77430S000BE)
compatible = "renesas,sk-rzg1m", "renesas,r8a7743"
- Wheat
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH v3 1/1] KVM: ARM64: Fix the issues when guest PMCCFILTR is configured
From: Marc Zyngier @ 2016-11-17 13:38 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161117133039.GH22855@arm.com>
On 17/11/16 13:30, Will Deacon wrote:
> On Wed, Nov 16, 2016 at 11:09:20AM -0600, Wei Huang wrote:
>> KVM calls kvm_pmu_set_counter_event_type() when PMCCFILTR is configured.
>> But this function can't deals with PMCCFILTR correctly because the evtCount
>> bits of PMCCFILTR, which is reserved 0, conflits with the SW_INCR event
>> type of other PMXEVTYPER<n> registers. To fix it, when eventsel == 0, this
>> function shouldn't return immediately; instead it needs to check further
>> if select_idx is ARMV8_PMU_CYCLE_IDX.
>>
>> Another issue is that KVM shouldn't copy the eventsel bits of PMCCFILTER
>> blindly to attr.config. Instead it ought to convert the request to the
>> "cpu cycle" event type (i.e. 0x11).
>>
>> To support this patch and to prevent duplicated definitions, a limited
>> set of ARMv8 perf event types were relocated from perf_event.c to
>> asm/perf_event.h.
>>
>> Signed-off-by: Wei Huang <wei@redhat.com>
>> ---
>> arch/arm64/include/asm/perf_event.h | 10 +++++++++-
>> arch/arm64/kernel/perf_event.c | 10 +---------
>> virt/kvm/arm/pmu.c | 8 +++++---
>> 3 files changed, 15 insertions(+), 13 deletions(-)
>
> Acked-by: Will Deacon <will.deacon@arm.com>
>
> I'm assuming this will go via kvm-arm.
Yup, I'll take it. Thanks.
M.
--
Jazz is not dead. It just smells funny...
^ permalink raw reply
* [PATCH] ARM: dt: imx31: fix AVIC base address
From: Fabio Estevam @ 2016-11-17 13:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161117013051.29381-1-vz@mleia.com>
On Wed, Nov 16, 2016 at 11:30 PM, Vladimir Zapolskiy <vz@mleia.com> wrote:
> From: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
>
> On i.MX31 AVIC interrupt controller base address is at 0x68000000.
>
> The problem was shadowed by the AVIC driver, which takes the correct
> base address from a SoC specific header file.
>
> Fixes: d2a37b3d91f4 ("ARM i.MX31: Add devicetree support")
> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Yes, this is what the Reference Manual states, thanks.
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
^ permalink raw reply
* [RFC PATCH] of: base: add support to get machine model name
From: Arnd Bergmann @ 2016-11-17 13:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1479383450-19183-1-git-send-email-sudeep.holla@arm.com>
On Thursday, November 17, 2016 11:50:50 AM CET Sudeep Holla wrote:
> Currently platforms/drivers needing to get the machine model name are
> replicating the same snippet of code. In some case, the OF reference
> counting is either missing or incorrect.
>
> This patch adds support to read the machine model name either using
> the "model" or the "compatible" property in the device tree root node.
>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
I like the idea. One small comment:
> +int of_machine_get_model_name(const char **model)
> +{
> + int error;
> + struct device_node *root;
> +
> + root = of_find_node_by_path("/");
> + if (!root)
> + return -EINVAL;
The global of_root variable points ot this already, and is defined
in the same file, so I think we can just skip the lookup.
Arnd
^ permalink raw reply
* [PATCH 1/4] ARM: shmobile: r8a7745: add power domain index macros
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479389981.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Add macros usable by the device tree sources to reference R8A7745 SYSC power
domains by index.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
include/dt-bindings/power/r8a7745-sysc.h | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 include/dt-bindings/power/r8a7745-sysc.h
diff --git a/include/dt-bindings/power/r8a7745-sysc.h b/include/dt-bindings/power/r8a7745-sysc.h
new file mode 100644
index 000000000000..1844c1171c04
--- /dev/null
+++ b/include/dt-bindings/power/r8a7745-sysc.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A7745_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A7745_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A7745_PD_CA7_CPU0 5
+#define R8A7745_PD_CA7_CPU1 6
+#define R8A7745_PD_SGX 20
+#define R8A7745_PD_CA7_SCU 21
+
+/* Always-on power area */
+#define R8A7745_PD_ALWAYS_ON 32
+
+#endif /* __DT_BINDINGS_POWER_R8A7745_SYSC_H__ */
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [GIT PULL] Second Round of Renesas ARM Based SoC Drivers Updates for v4.10
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these second round of Renesas ARM based SoC drivers updates for v4.10.
This pull request is based on a merge of:
* The previous round of such requests, tagged as renesas-drivers-for-v4.10,
which you have already pulled.
* The soc-device-match-tag1 tag of Geert Uytterhoeven's renesas-driver's tree.
This is included to provide core soc_device_match() infrastructure which
is a dependency of identifying SoC and registering with SoC bus.
The following changes since commit 437c4eeb0bd4c1d68817be997716f52b8c22a9c3:
Merge tag 'soc-device-match-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into HEAD (2016-11-15 14:12:57 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-drivers2-for-v4.10
for you to fetch changes up to 63ee9e2ba47dbdb42156c9b940515cfd49e78c91:
soc: renesas: Identify SoC and register with the SoC bus (2016-11-17 14:37:20 +0100)
----------------------------------------------------------------
Second Round of Renesas ARM Based SoC Drivers Updates for v4.10
* Identify SoC and register with the SoC bus
* Add support for the r8a7745 SoC to rcar-sysc
----------------------------------------------------------------
Geert Uytterhoeven (2):
ARM: shmobile: Document DT bindings for Product Register
soc: renesas: Identify SoC and register with the SoC bus
Sergei Shtylyov (2):
ARM: shmobile: r8a7745: add power domain index macros
soc: renesas: rcar-sysc: add R8A7745 support
Documentation/devicetree/bindings/arm/shmobile.txt | 18 ++
.../bindings/power/renesas,rcar-sysc.txt | 1 +
arch/arm/mach-shmobile/Kconfig | 1 +
arch/arm64/Kconfig.platforms | 1 +
drivers/soc/renesas/Makefile | 3 +
drivers/soc/renesas/r8a7745-sysc.c | 32 +++
drivers/soc/renesas/rcar-sysc.c | 3 +
drivers/soc/renesas/rcar-sysc.h | 1 +
drivers/soc/renesas/renesas-soc.c | 257 +++++++++++++++++++++
include/dt-bindings/power/r8a7745-sysc.h | 25 ++
10 files changed, 342 insertions(+)
create mode 100644 drivers/soc/renesas/r8a7745-sysc.c
create mode 100644 drivers/soc/renesas/renesas-soc.c
create mode 100644 include/dt-bindings/power/r8a7745-sysc.h
^ permalink raw reply
* [PATCH 2/4] soc: renesas: rcar-sysc: add R8A7745 support
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479389981.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Add support for RZ/G1E (R8A7745) SoC power areas to the R-Car SYSC driver.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
.../bindings/power/renesas,rcar-sysc.txt | 1 +
drivers/soc/renesas/Makefile | 1 +
drivers/soc/renesas/r8a7745-sysc.c | 32 ++++++++++++++++++++++
drivers/soc/renesas/rcar-sysc.c | 3 ++
drivers/soc/renesas/rcar-sysc.h | 1 +
5 files changed, 38 insertions(+)
create mode 100644 drivers/soc/renesas/r8a7745-sysc.c
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
index c16ec1866ac4..d91715bc8d52 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
@@ -8,6 +8,7 @@ and various coprocessors.
Required properties:
- compatible: Must contain exactly one of the following:
- "renesas,r8a7743-sysc" (RZ/G1M)
+ - "renesas,r8a7745-sysc" (RZ/G1E)
- "renesas,r8a7779-sysc" (R-Car H1)
- "renesas,r8a7790-sysc" (R-Car H2)
- "renesas,r8a7791-sysc" (R-Car M2-W)
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index 9e0bb329594c..e2249f01b2de 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_ARCH_R8A7743) += rcar-sysc.o r8a7743-sysc.o
+obj-$(CONFIG_ARCH_R8A7745) += rcar-sysc.o r8a7745-sysc.o
obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o r8a7779-sysc.o
obj-$(CONFIG_ARCH_R8A7790) += rcar-sysc.o r8a7790-sysc.o
obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o r8a7791-sysc.o
diff --git a/drivers/soc/renesas/r8a7745-sysc.c b/drivers/soc/renesas/r8a7745-sysc.c
new file mode 100644
index 000000000000..d17887c08aa1
--- /dev/null
+++ b/drivers/soc/renesas/r8a7745-sysc.c
@@ -0,0 +1,32 @@
+/*
+ * Renesas RZ/G1E System Controller
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation; of the License.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a7745-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a7745_areas[] __initconst = {
+ { "always-on", 0, 0, R8A7745_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+ { "ca7-scu", 0x100, 0, R8A7745_PD_CA7_SCU, R8A7745_PD_ALWAYS_ON,
+ PD_SCU },
+ { "ca7-cpu0", 0x1c0, 0, R8A7745_PD_CA7_CPU0, R8A7745_PD_CA7_SCU,
+ PD_CPU_NOCR },
+ { "ca7-cpu1", 0x1c0, 1, R8A7745_PD_CA7_CPU1, R8A7745_PD_CA7_SCU,
+ PD_CPU_NOCR },
+ { "sgx", 0xc0, 0, R8A7745_PD_SGX, R8A7745_PD_ALWAYS_ON },
+};
+
+const struct rcar_sysc_info r8a7745_sysc_info __initconst = {
+ .areas = r8a7745_areas,
+ .num_areas = ARRAY_SIZE(r8a7745_areas),
+};
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 71acd45b13f0..225c35c79d9a 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -278,6 +278,9 @@ static const struct of_device_id rcar_sysc_matches[] = {
#ifdef CONFIG_ARCH_R8A7743
{ .compatible = "renesas,r8a7743-sysc", .data = &r8a7743_sysc_info },
#endif
+#ifdef CONFIG_ARCH_R8A7745
+ { .compatible = "renesas,r8a7745-sysc", .data = &r8a7745_sysc_info },
+#endif
#ifdef CONFIG_ARCH_R8A7779
{ .compatible = "renesas,r8a7779-sysc", .data = &r8a7779_sysc_info },
#endif
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 8ab9ca8a825a..f6e842e2976e 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -51,6 +51,7 @@ struct rcar_sysc_info {
};
extern const struct rcar_sysc_info r8a7743_sysc_info;
+extern const struct rcar_sysc_info r8a7745_sysc_info;
extern const struct rcar_sysc_info r8a7779_sysc_info;
extern const struct rcar_sysc_info r8a7790_sysc_info;
extern const struct rcar_sysc_info r8a7791_sysc_info;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 3/4] ARM: shmobile: Document DT bindings for Product Register
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479389981.git.horms+renesas@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add device tree binding documentation for the Product Register (PRR),
which provides product and revision information on most Renesas ARM
SoCs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Documentation/devicetree/bindings/arm/shmobile.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 2f0b7169f132..23c77315fdac 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -75,3 +75,21 @@ Boards:
compatible = "renesas,silk", "renesas,r8a7794"
- Wheat
compatible = "renesas,wheat", "renesas,r8a7792"
+
+
+Most Renesas ARM SoCs have a Product Register that allows to retrieve SoC
+product and revision information. If present, a device node for this register
+should be added.
+
+Required properties:
+ - compatible: Must be "renesas,prr".
+ - reg: Base address and length of the register block.
+
+
+Examples
+--------
+
+ prr: chipid at ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 4/4] soc: renesas: Identify SoC and register with the SoC bus
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479389981.git.horms+renesas@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be>
Identify the SoC type and revision, and register this information with
the SoC bus, so it is available under /sys/devices/soc0/, and can be
checked where needed using soc_device_match().
Identification is done using the Product Register or Common Chip Code
Register, as declared in DT (PRR only for now), or using a hardcoded
fallback if missing.
Example:
Detected Renesas R-Car Gen2 r8a7791 ES1.0
...
# cat /sys/devices/soc0/{machine,family,soc_id,revision}
Koelsch
R-Car Gen2
r8a7791
ES1.0
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/mach-shmobile/Kconfig | 1 +
arch/arm64/Kconfig.platforms | 1 +
drivers/soc/renesas/Makefile | 2 +
drivers/soc/renesas/renesas-soc.c | 257 ++++++++++++++++++++++++++++++++++++++
4 files changed, 261 insertions(+)
create mode 100644 drivers/soc/renesas/renesas-soc.c
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 09817bae4558..ebab13e8afa1 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -40,6 +40,7 @@ menuconfig ARCH_RENESAS
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select NO_IOPORT_MAP
select PINCTRL
+ select SOC_BUS
select GPIOLIB
select ZONE_DMA if ARM_LPAE
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index cfbdf02ef566..72f4eac5cbbc 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -143,6 +143,7 @@ config ARCH_RENESAS
select PM
select PM_GENERIC_DOMAINS
select RENESAS_IRQC
+ select SOC_BUS
help
This enables support for the ARMv8 based Renesas SoCs.
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index e2249f01b2de..91c42b34705f 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -1,3 +1,5 @@
+obj-$(CONFIG_SOC_BUS) += renesas-soc.o
+
obj-$(CONFIG_ARCH_R8A7743) += rcar-sysc.o r8a7743-sysc.o
obj-$(CONFIG_ARCH_R8A7745) += rcar-sysc.o r8a7745-sysc.o
obj-$(CONFIG_ARCH_R8A7779) += rcar-sysc.o r8a7779-sysc.o
diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
new file mode 100644
index 000000000000..330960312296
--- /dev/null
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -0,0 +1,257 @@
+/*
+ * Renesas SoC Identification
+ *
+ * Copyright (C) 2014-2016 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/sys_soc.h>
+
+
+struct renesas_family {
+ const char name[16];
+ u32 reg; /* CCCR or PRR, if not in DT */
+};
+
+static const struct renesas_family fam_rcar_gen1 __initconst __maybe_unused = {
+ .name = "R-Car Gen1",
+ .reg = 0xff000044, /* PRR (Product Register) */
+};
+
+static const struct renesas_family fam_rcar_gen2 __initconst __maybe_unused = {
+ .name = "R-Car Gen2",
+ .reg = 0xff000044, /* PRR (Product Register) */
+};
+
+static const struct renesas_family fam_rcar_gen3 __initconst __maybe_unused = {
+ .name = "R-Car Gen3",
+ .reg = 0xfff00044, /* PRR (Product Register) */
+};
+
+static const struct renesas_family fam_rmobile __initconst __maybe_unused = {
+ .name = "R-Mobile",
+ .reg = 0xe600101c, /* CCCR (Common Chip Code Register) */
+};
+
+static const struct renesas_family fam_rza __initconst __maybe_unused = {
+ .name = "RZ/A",
+};
+
+static const struct renesas_family fam_rzg __initconst __maybe_unused = {
+ .name = "RZ/G",
+ .reg = 0xff000044, /* PRR (Product Register) */
+};
+
+static const struct renesas_family fam_shmobile __initconst __maybe_unused = {
+ .name = "SH-Mobile",
+ .reg = 0xe600101c, /* CCCR (Common Chip Code Register) */
+};
+
+
+struct renesas_soc {
+ const struct renesas_family *family;
+ u8 id;
+};
+
+static const struct renesas_soc soc_rz_a1h __initconst __maybe_unused = {
+ .family = &fam_rza,
+};
+
+static const struct renesas_soc soc_rmobile_ape6 __initconst __maybe_unused = {
+ .family = &fam_rmobile,
+ .id = 0x3f,
+};
+
+static const struct renesas_soc soc_rmobile_a1 __initconst __maybe_unused = {
+ .family = &fam_rmobile,
+ .id = 0x40,
+};
+
+static const struct renesas_soc soc_rz_g1m __initconst __maybe_unused = {
+ .family = &fam_rzg,
+ .id = 0x47,
+};
+
+static const struct renesas_soc soc_rz_g1e __initconst __maybe_unused = {
+ .family = &fam_rzg,
+ .id = 0x4c,
+};
+
+static const struct renesas_soc soc_rcar_m1a __initconst __maybe_unused = {
+ .family = &fam_rcar_gen1,
+};
+
+static const struct renesas_soc soc_rcar_h1 __initconst __maybe_unused = {
+ .family = &fam_rcar_gen1,
+ .id = 0x3b,
+};
+
+static const struct renesas_soc soc_rcar_h2 __initconst __maybe_unused = {
+ .family = &fam_rcar_gen2,
+ .id = 0x45,
+};
+
+static const struct renesas_soc soc_rcar_m2_w __initconst __maybe_unused = {
+ .family = &fam_rcar_gen2,
+ .id = 0x47,
+};
+
+static const struct renesas_soc soc_rcar_v2h __initconst __maybe_unused = {
+ .family = &fam_rcar_gen2,
+ .id = 0x4a,
+};
+
+static const struct renesas_soc soc_rcar_m2_n __initconst __maybe_unused = {
+ .family = &fam_rcar_gen2,
+ .id = 0x4b,
+};
+
+static const struct renesas_soc soc_rcar_e2 __initconst __maybe_unused = {
+ .family = &fam_rcar_gen2,
+ .id = 0x4c,
+};
+
+static const struct renesas_soc soc_rcar_h3 __initconst __maybe_unused = {
+ .family = &fam_rcar_gen3,
+ .id = 0x4f,
+};
+
+static const struct renesas_soc soc_rcar_m3_w __initconst __maybe_unused = {
+ .family = &fam_rcar_gen3,
+ .id = 0x52,
+};
+
+static const struct renesas_soc soc_shmobile_ag5 __initconst __maybe_unused = {
+ .family = &fam_shmobile,
+ .id = 0x37,
+};
+
+
+static const struct of_device_id renesas_socs[] __initconst = {
+#ifdef CONFIG_ARCH_R7S72100
+ { .compatible = "renesas,r7s72100", .data = &soc_rz_a1h },
+#endif
+#ifdef CONFIG_ARCH_R8A73A4
+ { .compatible = "renesas,r8a73a4", .data = &soc_rmobile_ape6 },
+#endif
+#ifdef CONFIG_ARCH_R8A7740
+ { .compatible = "renesas,r8a7740", .data = &soc_rmobile_a1 },
+#endif
+#ifdef CONFIG_ARCH_R8A7743
+ { .compatible = "renesas,r8a7743", .data = &soc_rz_g1m },
+#endif
+#ifdef CONFIG_ARCH_R8A7745
+ { .compatible = "renesas,r8a7745", .data = &soc_rz_g1e },
+#endif
+#ifdef CONFIG_ARCH_R8A7778
+ { .compatible = "renesas,r8a7778", .data = &soc_rcar_m1a },
+#endif
+#ifdef CONFIG_ARCH_R8A7779
+ { .compatible = "renesas,r8a7779", .data = &soc_rcar_h1 },
+#endif
+#ifdef CONFIG_ARCH_R8A7790
+ { .compatible = "renesas,r8a7790", .data = &soc_rcar_h2 },
+#endif
+#ifdef CONFIG_ARCH_R8A7791
+ { .compatible = "renesas,r8a7791", .data = &soc_rcar_m2_w },
+#endif
+#ifdef CONFIG_ARCH_R8A7792
+ { .compatible = "renesas,r8a7792", .data = &soc_rcar_v2h },
+#endif
+#ifdef CONFIG_ARCH_R8A7793
+ { .compatible = "renesas,r8a7793", .data = &soc_rcar_m2_n },
+#endif
+#ifdef CONFIG_ARCH_R8A7794
+ { .compatible = "renesas,r8a7794", .data = &soc_rcar_e2 },
+#endif
+#ifdef CONFIG_ARCH_R8A7795
+ { .compatible = "renesas,r8a7795", .data = &soc_rcar_h3 },
+#endif
+#ifdef CONFIG_ARCH_R8A7796
+ { .compatible = "renesas,r8a7796", .data = &soc_rcar_m3_w },
+#endif
+#ifdef CONFIG_ARCH_SH73A0
+ { .compatible = "renesas,sh73a0", .data = &soc_shmobile_ag5 },
+#endif
+ { /* sentinel */ }
+};
+
+static int __init renesas_soc_init(void)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ const struct renesas_family *family;
+ const struct of_device_id *match;
+ const struct renesas_soc *soc;
+ void __iomem *chipid = NULL;
+ struct soc_device *soc_dev;
+ struct device_node *np;
+ unsigned int product;
+
+ match = of_match_node(renesas_socs, of_root);
+ if (!match)
+ return -ENODEV;
+
+ soc = match->data;
+ family = soc->family;
+
+ /* Try PRR first, then hardcoded fallback */
+ np = of_find_compatible_node(NULL, NULL, "renesas,prr");
+ if (np) {
+ chipid = of_iomap(np, 0);
+ of_node_put(np);
+ } else if (soc->id) {
+ chipid = ioremap(family->reg, 4);
+ }
+ if (chipid) {
+ product = readl(chipid);
+ iounmap(chipid);
+ if (soc->id && ((product >> 8) & 0xff) != soc->id) {
+ pr_warn("SoC mismatch (product = 0x%x)\n", product);
+ return -ENODEV;
+ }
+ }
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ np = of_find_node_by_path("/");
+ of_property_read_string(np, "model", &soc_dev_attr->machine);
+ of_node_put(np);
+
+ soc_dev_attr->family = kstrdup_const(family->name, GFP_KERNEL);
+ soc_dev_attr->soc_id = kstrdup_const(strchr(match->compatible, ',') + 1,
+ GFP_KERNEL);
+ if (chipid)
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "ES%u.%u",
+ ((product >> 4) & 0x0f) + 1,
+ product & 0xf);
+
+ pr_info("Detected Renesas %s %s %s\n", soc_dev_attr->family,
+ soc_dev_attr->soc_id, soc_dev_attr->revision ?: "");
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->revision);
+ kfree_const(soc_dev_attr->soc_id);
+ kfree_const(soc_dev_attr->family);
+ kfree(soc_dev_attr);
+ return PTR_ERR(soc_dev);
+ }
+
+ return 0;
+}
+core_initcall(renesas_soc_init);
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 01/18] arm64: dts: r8a7796: add I2C support
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479388193.git.horms+renesas@verge.net.au>
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 94 ++++++++++++++++++++++++++++++++
1 file changed, 94 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index f9cb7796ad49..2e940ff61378 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -17,6 +17,16 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
@@ -239,6 +249,90 @@
#power-domain-cells = <1>;
};
+ i2c0: i2c at e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at e66d0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c4: i2c at e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c5: i2c at e66e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c6: i2c at e66e8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7796";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
scif2: serial at e6e88000 {
compatible = "renesas,scif-r8a7796",
"renesas,rcar-gen3-scif", "renesas,scif";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 02/18] arm64: dts: r8a7796: Enable I2C DMA
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479388193.git.horms+renesas@verge.net.au>
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 2e940ff61378..9599f5691099 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -257,6 +257,9 @@
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+ <&dmac2 0x91>, <&dmac2 0x90>;
+ dma-names = "tx", "rx", "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -269,6 +272,9 @@
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+ <&dmac2 0x93>, <&dmac2 0x92>;
+ dma-names = "tx", "rx", "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -281,6 +287,9 @@
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+ <&dmac2 0x95>, <&dmac2 0x94>;
+ dma-names = "tx", "rx", "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -293,6 +302,8 @@
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -305,6 +316,8 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -317,6 +330,8 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 919>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -329,6 +344,8 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 918>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+ dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 03/18] arm64: dts: r8a7796: salvator-x: enable I2C
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479388193.git.horms+renesas@verge.net.au>
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index a9c296b1e1b7..f35e96ca7d60 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -111,6 +111,11 @@
function = "scif_clk";
};
+ i2c2_pins: i2c2 {
+ groups = "i2c2_a";
+ function = "i2c2";
+ };
+
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
@@ -208,6 +213,13 @@
status = "okay";
};
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&wdt0 {
timeout-sec = <60>;
status = "okay";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 04/18] arm64: dts: h3ulcb: update documentation with official board name
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479388193.git.horms+renesas@verge.net.au>
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This updates H3ULCB Device tree bindings Documentation with
official board name
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Documentation/devicetree/bindings/arm/shmobile.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 23c77315fdac..968ae9a05440 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -49,7 +49,7 @@ Boards:
compatible = "renesas,genmai", "renesas,r7s72100"
- Gose
compatible = "renesas,gose", "renesas,r8a7793"
- - H3ULCB (RTP0RC7795SKB00010S)
+ - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKB00010S)
compatible = "renesas,h3ulcb", "renesas,r8a7795";
- Henninger
compatible = "renesas,henninger", "renesas,r8a7791"
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 05/18] arm64: dts: h3ulcb: update header
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479388193.git.horms+renesas@verge.net.au>
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This updates H3ULCB device tree header with official board name
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index bcb11a868343..f178fe1730de 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -1,5 +1,5 @@
/*
- * Device Tree Source for the H3ULCB board
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
*
* Copyright (C) 2016 Renesas Electronics Corp.
* Copyright (C) 2016 Cogent Embedded, Inc.
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 06/18] arm64: dts: m3ulcb: add M3ULCB board DT bindings
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479388193.git.horms+renesas@verge.net.au>
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Add M3ULCB Device tree bindings Documentation, listing it as a supported
board.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 968ae9a05440..9a3c2631d0d4 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -61,6 +61,8 @@ Boards:
compatible = "renesas,kzm9g", "renesas,sh73a0"
- Lager (RTP0RC7790SEB00010S)
compatible = "renesas,lager", "renesas,r8a7790"
+ - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKB00010S)
+ compatible = "renesas,m3ulcb", "renesas,r8a7796";
- Marzen
compatible = "renesas,marzen", "renesas,r8a7779"
- Porter (M2-LCDP)
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 07/18] arm64: dts: m3ulcb: initial device tree
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479388193.git.horms+renesas@verge.net.au>
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Add the initial device tree for the R8A7796 SoC based M3ULCB low cost
board (R-Car Starter Kit Pro)
This commit supports the following peripherals:
- SCIF (console)
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/Makefile | 2 +-
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 51 ++++++++++++++++++++++++++
2 files changed, 52 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index eb72830ec9eb..1618e0a3c81d 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,5 +1,5 @@
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
always := $(dtb-y)
clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
new file mode 100644
index 000000000000..1ae0708bb495
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -0,0 +1,51 @@
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7796.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Renesas M3ULCB board based on r8a7796";
+ compatible = "renesas,m3ulcb", "renesas,r8a7796";
+
+ aliases {
+ serial0 = &scif2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&pfc {
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 08/18] arm64: dts: m3ulcb: enable SCIF clk and pins
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479388193.git.horms+renesas@verge.net.au>
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This enables the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 1ae0708bb495..96cda59c2698 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -37,10 +37,18 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
};
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
};
&scif2 {
@@ -49,3 +57,8 @@
status = "okay";
};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 09/18] arm64: dts: m3ulcb: enable GPIO leds
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479388193.git.horms+renesas@verge.net.au>
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports GPIO leds on M3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 96cda59c2698..49162bd488f8 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -30,6 +30,17 @@
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ led5 {
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+ led6 {
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&extal_clk {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 10/18] arm64: dts: m3ulcb: enable GPIO keys
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479388193.git.horms+renesas@verge.net.au>
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports GPIO keys on M3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 49162bd488f8..2f8f183ea0cd 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include "r8a7796.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Renesas M3ULCB board based on r8a7796";
@@ -41,6 +42,18 @@
gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
};
};
+
+ keyboard {
+ compatible = "gpio-keys";
+
+ key-1 {
+ linux,code = <KEY_1>;
+ label = "SW3";
+ wakeup-source;
+ debounce-interval = <20>;
+ gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&extal_clk {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 11/18] arm64: dts: m3ulcb: enable EXTALR clk
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479388193.git.horms+renesas@verge.net.au>
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This enables EXTALR clock that can be used for the watchdog.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 2f8f183ea0cd..5567c46f3753 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -60,6 +60,10 @@
clock-frequency = <16666666>;
};
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
&pfc {
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 12/18] arm64: dts: m3ulcb: enable WDT
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479388193.git.horms+renesas@verge.net.au>
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports watchdog timer for M3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 5567c46f3753..593d0b4ab31a 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -90,3 +90,8 @@
clock-frequency = <14745600>;
status = "okay";
};
+
+&wdt0 {
+ timeout-sec = <60>;
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
* [PATCH 13/18] arm64: dts: m3ulcb: enable SDHI0
From: Simon Horman @ 2016-11-17 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1479388193.git.horms+renesas@verge.net.au>
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
This supports SDHI0 on M3ULCB board SD card slot
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 49 ++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index 593d0b4ab31a..d209e5480ff6 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -54,6 +54,30 @@
gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
};
};
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
};
&extal_clk {
@@ -77,6 +101,31 @@
groups = "scif_clk_a";
function = "scif_clk";
};
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ status = "okay";
};
&scif2 {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox