* [PATCH v13 3/5] tee: add OP-TEE driver
From: Jens Wiklander @ 2016-11-18 14:51 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1479480700-554-1-git-send-email-jens.wiklander@linaro.org>
Adds a OP-TEE driver which also can be compiled as a loadable module.
* Targets ARM and ARM64
* Supports using reserved memory from OP-TEE as shared memory
* Probes OP-TEE version using SMCs
* Accepts requests on privileged and unprivileged device
* Uses OPTEE message protocol version 2 to communicate with secure world
Acked-by: Andreas Dannenberg <dannenberg@ti.com>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (HiKey)
Tested-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> (RCAR H3)
Reviewed-by: Javier Gonz?lez <javier@javigon.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
---
MAINTAINERS | 5 +
drivers/tee/Kconfig | 10 +
drivers/tee/Makefile | 1 +
drivers/tee/optee/Kconfig | 7 +
drivers/tee/optee/Makefile | 5 +
drivers/tee/optee/call.c | 435 +++++++++++++++++++++++++++
drivers/tee/optee/core.c | 598 ++++++++++++++++++++++++++++++++++++++
drivers/tee/optee/optee_msg.h | 435 +++++++++++++++++++++++++++
drivers/tee/optee/optee_private.h | 185 ++++++++++++
drivers/tee/optee/optee_smc.h | 446 ++++++++++++++++++++++++++++
drivers/tee/optee/rpc.c | 404 +++++++++++++++++++++++++
drivers/tee/optee/supp.c | 273 +++++++++++++++++
12 files changed, 2804 insertions(+)
create mode 100644 drivers/tee/optee/Kconfig
create mode 100644 drivers/tee/optee/Makefile
create mode 100644 drivers/tee/optee/call.c
create mode 100644 drivers/tee/optee/core.c
create mode 100644 drivers/tee/optee/optee_msg.h
create mode 100644 drivers/tee/optee/optee_private.h
create mode 100644 drivers/tee/optee/optee_smc.h
create mode 100644 drivers/tee/optee/rpc.c
create mode 100644 drivers/tee/optee/supp.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 7bb48fd..84348f2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9000,6 +9000,11 @@ F: arch/*/oprofile/
F: drivers/oprofile/
F: include/linux/oprofile.h
+OP-TEE DRIVER
+M: Jens Wiklander <jens.wiklander@linaro.org>
+S: Maintained
+F: drivers/tee/optee/
+
ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
M: Mark Fasheh <mfasheh@versity.com>
M: Joel Becker <jlbec@evilplan.org>
diff --git a/drivers/tee/Kconfig b/drivers/tee/Kconfig
index 50c244e..2330a4e 100644
--- a/drivers/tee/Kconfig
+++ b/drivers/tee/Kconfig
@@ -6,3 +6,13 @@ config TEE
help
This implements a generic interface towards a Trusted Execution
Environment (TEE).
+
+if TEE
+
+menu "TEE drivers"
+
+source "drivers/tee/optee/Kconfig"
+
+endmenu
+
+endif
diff --git a/drivers/tee/Makefile b/drivers/tee/Makefile
index ec64047..7a4e4a1 100644
--- a/drivers/tee/Makefile
+++ b/drivers/tee/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_TEE) += tee.o
tee-objs += tee_core.o
tee-objs += tee_shm.o
tee-objs += tee_shm_pool.o
+obj-$(CONFIG_OPTEE) += optee/
diff --git a/drivers/tee/optee/Kconfig b/drivers/tee/optee/Kconfig
new file mode 100644
index 0000000..0126de8
--- /dev/null
+++ b/drivers/tee/optee/Kconfig
@@ -0,0 +1,7 @@
+# OP-TEE Trusted Execution Environment Configuration
+config OPTEE
+ tristate "OP-TEE"
+ depends on HAVE_ARM_SMCCC
+ help
+ This implements the OP-TEE Trusted Execution Environment (TEE)
+ driver.
diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile
new file mode 100644
index 0000000..92fe578
--- /dev/null
+++ b/drivers/tee/optee/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_OPTEE) += optee.o
+optee-objs += core.o
+optee-objs += call.o
+optee-objs += rpc.o
+optee-objs += supp.o
diff --git a/drivers/tee/optee/call.c b/drivers/tee/optee/call.c
new file mode 100644
index 0000000..97fad0e
--- /dev/null
+++ b/drivers/tee/optee/call.c
@@ -0,0 +1,435 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/arm-smccc.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include "optee_private.h"
+#include "optee_smc.h"
+
+struct optee_call_waiter {
+ struct list_head list_node;
+ struct completion c;
+ bool completed;
+};
+
+static void optee_cq_wait_init(struct optee_call_queue *cq,
+ struct optee_call_waiter *w)
+{
+ mutex_lock(&cq->mutex);
+
+ /*
+ * We add ourselves to the queue, but we don't wait. This
+ * guarantees that we don't lose a completion if secure world
+ * returns busy and another thread just exited and try to complete
+ * someone.
+ */
+ w->completed = false;
+ init_completion(&w->c);
+ list_add_tail(&w->list_node, &cq->waiters);
+
+ mutex_unlock(&cq->mutex);
+}
+
+static void optee_cq_wait_for_completion(struct optee_call_queue *cq,
+ struct optee_call_waiter *w)
+{
+ wait_for_completion(&w->c);
+
+ mutex_lock(&cq->mutex);
+
+ /* Move to end of list to get out of the way for other waiters */
+ list_del(&w->list_node);
+ w->completed = false;
+ reinit_completion(&w->c);
+ list_add_tail(&w->list_node, &cq->waiters);
+
+ mutex_unlock(&cq->mutex);
+}
+
+static void optee_cq_complete_one(struct optee_call_queue *cq)
+{
+ struct optee_call_waiter *w;
+
+ list_for_each_entry(w, &cq->waiters, list_node) {
+ if (!w->completed) {
+ complete(&w->c);
+ w->completed = true;
+ break;
+ }
+ }
+}
+
+static void optee_cq_wait_final(struct optee_call_queue *cq,
+ struct optee_call_waiter *w)
+{
+ mutex_lock(&cq->mutex);
+
+ /* Get out of the list */
+ list_del(&w->list_node);
+
+ optee_cq_complete_one(cq);
+ /*
+ * If we're completed we've got a completion that some other task
+ * could have used instead.
+ */
+ if (w->completed)
+ optee_cq_complete_one(cq);
+
+ mutex_unlock(&cq->mutex);
+}
+
+/* Requires the filpstate mutex to be held */
+static struct optee_session *find_session(struct optee_context_data *ctxdata,
+ u32 session_id)
+{
+ struct optee_session *sess;
+
+ list_for_each_entry(sess, &ctxdata->sess_list, list_node)
+ if (sess->session_id == session_id)
+ return sess;
+
+ return NULL;
+}
+
+/**
+ * optee_do_call_with_arg() - Do an SMC to OP-TEE in secure world
+ * @ctx: calling context
+ * @parg: physical address of message to pass to secure world
+ *
+ * Does and SMC to OP-TEE in secure world and handles eventual resulting
+ * Remote Procedure Calls (RPC) from OP-TEE.
+ *
+ * Returns return code from secure world, 0 is OK
+ */
+u32 optee_do_call_with_arg(struct tee_context *ctx, phys_addr_t parg)
+{
+ struct optee *optee = tee_get_drvdata(ctx->teedev);
+ struct optee_call_waiter w;
+ struct optee_rpc_param param = { };
+ u32 ret;
+
+ param.a0 = OPTEE_SMC_CALL_WITH_ARG;
+ reg_pair_from_64(¶m.a1, ¶m.a2, parg);
+ /* Initialize waiter */
+ optee_cq_wait_init(&optee->call_queue, &w);
+ while (true) {
+ struct arm_smccc_res res;
+
+ optee->invoke_fn(param.a0, param.a1, param.a2, param.a3,
+ param.a4, param.a5, param.a6, param.a7,
+ &res);
+
+ if (res.a0 == OPTEE_SMC_RETURN_ETHREAD_LIMIT) {
+ /*
+ * Out of threads in secure world, wait for a thread
+ * become available.
+ */
+ optee_cq_wait_for_completion(&optee->call_queue, &w);
+ } else if (OPTEE_SMC_RETURN_IS_RPC(res.a0)) {
+ param.a0 = res.a0;
+ param.a1 = res.a1;
+ param.a2 = res.a2;
+ param.a3 = res.a3;
+ optee_handle_rpc(ctx, ¶m);
+ } else {
+ ret = res.a0;
+ break;
+ }
+ }
+
+ /*
+ * We're done with our thread in secure world, if there's any
+ * thread waiters wake up one.
+ */
+ optee_cq_wait_final(&optee->call_queue, &w);
+
+ return ret;
+}
+
+static struct tee_shm *get_msg_arg(struct tee_context *ctx, size_t num_params,
+ struct optee_msg_arg **msg_arg,
+ phys_addr_t *msg_parg)
+{
+ int rc;
+ struct tee_shm *shm;
+ struct optee_msg_arg *ma;
+
+ shm = tee_shm_alloc(ctx, OPTEE_MSG_GET_ARG_SIZE(num_params),
+ TEE_SHM_MAPPED);
+ if (IS_ERR(shm))
+ return shm;
+
+ ma = tee_shm_get_va(shm, 0);
+ if (IS_ERR(ma)) {
+ rc = PTR_ERR(ma);
+ goto out;
+ }
+
+ rc = tee_shm_get_pa(shm, 0, msg_parg);
+ if (rc)
+ goto out;
+
+ memset(ma, 0, OPTEE_MSG_GET_ARG_SIZE(num_params));
+ ma->num_params = num_params;
+ *msg_arg = ma;
+out:
+ if (rc) {
+ tee_shm_free(shm);
+ return ERR_PTR(rc);
+ }
+
+ return shm;
+}
+
+int optee_open_session(struct tee_context *ctx,
+ struct tee_ioctl_open_session_arg *arg,
+ struct tee_param *param)
+{
+ struct optee_context_data *ctxdata = ctx->data;
+ int rc;
+ struct tee_shm *shm;
+ struct optee_msg_arg *msg_arg;
+ phys_addr_t msg_parg;
+ struct optee_msg_param *msg_param;
+ struct optee_session *sess = NULL;
+
+ /* +2 for the meta parameters added below */
+ shm = get_msg_arg(ctx, arg->num_params + 2, &msg_arg, &msg_parg);
+ if (IS_ERR(shm))
+ return PTR_ERR(shm);
+
+ msg_arg->cmd = OPTEE_MSG_CMD_OPEN_SESSION;
+ msg_arg->cancel_id = arg->cancel_id;
+ msg_param = OPTEE_MSG_GET_PARAMS(msg_arg);
+
+ /*
+ * Initialize and add the meta parameters needed when opening a
+ * session.
+ */
+ msg_param[0].attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT |
+ OPTEE_MSG_ATTR_META;
+ msg_param[1].attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT |
+ OPTEE_MSG_ATTR_META;
+ memcpy(&msg_param[0].u.value, arg->uuid, sizeof(arg->uuid));
+ memcpy(&msg_param[1].u.value, arg->uuid, sizeof(arg->clnt_uuid));
+ msg_param[1].u.value.c = arg->clnt_login;
+
+ rc = optee_to_msg_param(msg_param + 2, arg->num_params, param);
+ if (rc)
+ goto out;
+
+ sess = kzalloc(sizeof(*sess), GFP_KERNEL);
+ if (!sess) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ if (optee_do_call_with_arg(ctx, msg_parg)) {
+ msg_arg->ret = TEEC_ERROR_COMMUNICATION;
+ msg_arg->ret_origin = TEEC_ORIGIN_COMMS;
+ }
+
+ if (msg_arg->ret == TEEC_SUCCESS) {
+ /* A new session has been created, add it to the list. */
+ sess->session_id = msg_arg->session;
+ mutex_lock(&ctxdata->mutex);
+ list_add(&sess->list_node, &ctxdata->sess_list);
+ mutex_unlock(&ctxdata->mutex);
+ } else {
+ kfree(sess);
+ }
+
+ if (optee_from_msg_param(param, arg->num_params, msg_param + 2)) {
+ arg->ret = TEEC_ERROR_COMMUNICATION;
+ arg->ret_origin = TEEC_ORIGIN_COMMS;
+ /* Close session again to avoid leakage */
+ optee_close_session(ctx, msg_arg->session);
+ } else {
+ arg->session = msg_arg->session;
+ arg->ret = msg_arg->ret;
+ arg->ret_origin = msg_arg->ret_origin;
+ }
+out:
+ tee_shm_free(shm);
+
+ return rc;
+}
+
+int optee_close_session(struct tee_context *ctx, u32 session)
+{
+ struct optee_context_data *ctxdata = ctx->data;
+ struct tee_shm *shm;
+ struct optee_msg_arg *msg_arg;
+ phys_addr_t msg_parg;
+ struct optee_session *sess;
+
+ /* Check that the session is valid and remove it from the list */
+ mutex_lock(&ctxdata->mutex);
+ sess = find_session(ctxdata, session);
+ if (sess)
+ list_del(&sess->list_node);
+ mutex_unlock(&ctxdata->mutex);
+ if (!sess)
+ return -EINVAL;
+ kfree(sess);
+
+ shm = get_msg_arg(ctx, 0, &msg_arg, &msg_parg);
+ if (IS_ERR(shm))
+ return PTR_ERR(shm);
+
+ msg_arg->cmd = OPTEE_MSG_CMD_CLOSE_SESSION;
+ msg_arg->session = session;
+ optee_do_call_with_arg(ctx, msg_parg);
+
+ tee_shm_free(shm);
+ return 0;
+}
+
+int optee_invoke_func(struct tee_context *ctx, struct tee_ioctl_invoke_arg *arg,
+ struct tee_param *param)
+{
+ struct optee_context_data *ctxdata = ctx->data;
+ struct tee_shm *shm;
+ struct optee_msg_arg *msg_arg;
+ phys_addr_t msg_parg;
+ struct optee_msg_param *msg_param;
+ struct optee_session *sess;
+ int rc;
+
+ /* Check that the session is valid */
+ mutex_lock(&ctxdata->mutex);
+ sess = find_session(ctxdata, arg->session);
+ mutex_unlock(&ctxdata->mutex);
+ if (!sess)
+ return -EINVAL;
+
+ shm = get_msg_arg(ctx, arg->num_params, &msg_arg, &msg_parg);
+ if (IS_ERR(shm))
+ return PTR_ERR(shm);
+ msg_arg->cmd = OPTEE_MSG_CMD_INVOKE_COMMAND;
+ msg_arg->func = arg->func;
+ msg_arg->session = arg->session;
+ msg_arg->cancel_id = arg->cancel_id;
+ msg_param = OPTEE_MSG_GET_PARAMS(msg_arg);
+
+ rc = optee_to_msg_param(msg_param, arg->num_params, param);
+ if (rc)
+ goto out;
+
+ if (optee_do_call_with_arg(ctx, msg_parg)) {
+ msg_arg->ret = TEEC_ERROR_COMMUNICATION;
+ msg_arg->ret_origin = TEEC_ORIGIN_COMMS;
+ }
+
+ if (optee_from_msg_param(param, arg->num_params, msg_param)) {
+ msg_arg->ret = TEEC_ERROR_COMMUNICATION;
+ msg_arg->ret_origin = TEEC_ORIGIN_COMMS;
+ }
+
+ arg->ret = msg_arg->ret;
+ arg->ret_origin = msg_arg->ret_origin;
+out:
+ tee_shm_free(shm);
+ return rc;
+}
+
+int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session)
+{
+ struct optee_context_data *ctxdata = ctx->data;
+ struct tee_shm *shm;
+ struct optee_msg_arg *msg_arg;
+ phys_addr_t msg_parg;
+ struct optee_session *sess;
+
+ /* Check that the session is valid */
+ mutex_lock(&ctxdata->mutex);
+ sess = find_session(ctxdata, session);
+ mutex_unlock(&ctxdata->mutex);
+ if (!sess)
+ return -EINVAL;
+
+ shm = get_msg_arg(ctx, 0, &msg_arg, &msg_parg);
+ if (IS_ERR(shm))
+ return PTR_ERR(shm);
+
+ msg_arg->cmd = OPTEE_MSG_CMD_CANCEL;
+ msg_arg->session = session;
+ msg_arg->cancel_id = cancel_id;
+ optee_do_call_with_arg(ctx, msg_parg);
+
+ tee_shm_free(shm);
+ return 0;
+}
+
+/**
+ * optee_enable_shm_cache() - Enables caching of some shared memory allocation
+ * in OP-TEE
+ * @optee: main service struct
+ */
+void optee_enable_shm_cache(struct optee *optee)
+{
+ struct optee_call_waiter w;
+
+ /* We need to retry until secure world isn't busy. */
+ optee_cq_wait_init(&optee->call_queue, &w);
+ while (true) {
+ struct arm_smccc_res res;
+
+ optee->invoke_fn(OPTEE_SMC_ENABLE_SHM_CACHE, 0, 0, 0, 0, 0, 0,
+ 0, &res);
+ if (res.a0 == OPTEE_SMC_RETURN_OK)
+ break;
+ optee_cq_wait_for_completion(&optee->call_queue, &w);
+ }
+ optee_cq_wait_final(&optee->call_queue, &w);
+}
+
+/**
+ * optee_enable_shm_cache() - Disables caching of some shared memory allocation
+ * in OP-TEE
+ * @optee: main service struct
+ */
+void optee_disable_shm_cache(struct optee *optee)
+{
+ struct optee_call_waiter w;
+
+ /* We need to retry until secure world isn't busy. */
+ optee_cq_wait_init(&optee->call_queue, &w);
+ while (true) {
+ union {
+ struct arm_smccc_res smccc;
+ struct optee_smc_disable_shm_cache_result result;
+ } res;
+
+ optee->invoke_fn(OPTEE_SMC_DISABLE_SHM_CACHE, 0, 0, 0, 0, 0, 0,
+ 0, &res.smccc);
+ if (res.result.status == OPTEE_SMC_RETURN_ENOTAVAIL)
+ break; /* All shm's freed */
+ if (res.result.status == OPTEE_SMC_RETURN_OK) {
+ struct tee_shm *shm;
+
+ shm = reg_pair_to_ptr(res.result.shm_upper32,
+ res.result.shm_lower32);
+ tee_shm_free(shm);
+ } else {
+ optee_cq_wait_for_completion(&optee->call_queue, &w);
+ }
+ }
+ optee_cq_wait_final(&optee->call_queue, &w);
+}
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
new file mode 100644
index 0000000..b4fe771
--- /dev/null
+++ b/drivers/tee/optee/core.c
@@ -0,0 +1,598 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/tee_drv.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include "optee_private.h"
+#include "optee_smc.h"
+
+#define DRIVER_NAME "optee"
+
+#define OPTEE_SHM_NUM_PRIV_PAGES 1
+
+/**
+ * optee_from_msg_param() - convert from OPTEE_MSG parameters to
+ * struct tee_param
+ * @params: subsystem internal parameter representation
+ * @num_params: number of elements in the parameter arrays
+ * @msg_params: OPTEE_MSG parameters
+ * Returns 0 on success or <0 on failure
+ */
+int optee_from_msg_param(struct tee_param *params, size_t num_params,
+ const struct optee_msg_param *msg_params)
+{
+ int rc;
+ size_t n;
+ struct tee_shm *shm;
+ phys_addr_t pa;
+
+ for (n = 0; n < num_params; n++) {
+ struct tee_param *p = params + n;
+ const struct optee_msg_param *mp = msg_params + n;
+ u32 attr = mp->attr & OPTEE_MSG_ATTR_TYPE_MASK;
+
+ switch (attr) {
+ case OPTEE_MSG_ATTR_TYPE_NONE:
+ p->attr = TEE_IOCTL_PARAM_ATTR_TYPE_NONE;
+ memset(&p->u, 0, sizeof(p->u));
+ break;
+ case OPTEE_MSG_ATTR_TYPE_VALUE_INPUT:
+ case OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT:
+ case OPTEE_MSG_ATTR_TYPE_VALUE_INOUT:
+ p->attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT +
+ attr - OPTEE_MSG_ATTR_TYPE_VALUE_INPUT;
+ p->u.value.a = mp->u.value.a;
+ p->u.value.b = mp->u.value.b;
+ p->u.value.c = mp->u.value.c;
+ break;
+ case OPTEE_MSG_ATTR_TYPE_TMEM_INPUT:
+ case OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT:
+ case OPTEE_MSG_ATTR_TYPE_TMEM_INOUT:
+ p->attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT +
+ attr - OPTEE_MSG_ATTR_TYPE_TMEM_INPUT;
+ p->u.memref.size = mp->u.tmem.size;
+ shm = (struct tee_shm *)(unsigned long)
+ mp->u.tmem.shm_ref;
+ if (!shm) {
+ p->u.memref.shm_offs = 0;
+ p->u.memref.shm = NULL;
+ break;
+ }
+ rc = tee_shm_get_pa(shm, 0, &pa);
+ if (rc)
+ return rc;
+ p->u.memref.shm_offs = mp->u.tmem.buf_ptr - pa;
+ p->u.memref.shm = shm;
+
+ /* Check that the memref is covered by the shm object */
+ if (p->u.memref.size) {
+ size_t o = p->u.memref.shm_offs +
+ p->u.memref.size - 1;
+
+ rc = tee_shm_get_pa(shm, o, NULL);
+ if (rc)
+ return rc;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+/**
+ * optee_to_msg_param() - convert from struct tee_params to OPTEE_MSG parameters
+ * @msg_params: OPTEE_MSG parameters
+ * @num_params: number of elements in the parameter arrays
+ * @params: subsystem itnernal parameter representation
+ * Returns 0 on success or <0 on failure
+ */
+int optee_to_msg_param(struct optee_msg_param *msg_params, size_t num_params,
+ const struct tee_param *params)
+{
+ int rc;
+ size_t n;
+ phys_addr_t pa;
+
+ for (n = 0; n < num_params; n++) {
+ const struct tee_param *p = params + n;
+ struct optee_msg_param *mp = msg_params + n;
+
+ switch (p->attr) {
+ case TEE_IOCTL_PARAM_ATTR_TYPE_NONE:
+ mp->attr = TEE_IOCTL_PARAM_ATTR_TYPE_NONE;
+ memset(&mp->u, 0, sizeof(mp->u));
+ break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT:
+ mp->attr = OPTEE_MSG_ATTR_TYPE_VALUE_INPUT + p->attr -
+ TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+ mp->u.value.a = p->u.value.a;
+ mp->u.value.b = p->u.value.b;
+ mp->u.value.c = p->u.value.c;
+ break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT:
+ mp->attr = OPTEE_MSG_ATTR_TYPE_TMEM_INPUT +
+ p->attr -
+ TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT;
+ mp->u.tmem.shm_ref = (unsigned long)p->u.memref.shm;
+ mp->u.tmem.size = p->u.memref.size;
+ if (!p->u.memref.shm) {
+ mp->u.tmem.buf_ptr = 0;
+ break;
+ }
+ rc = tee_shm_get_pa(p->u.memref.shm,
+ p->u.memref.shm_offs, &pa);
+ if (rc)
+ return rc;
+ mp->u.tmem.buf_ptr = pa;
+ mp->attr |= OPTEE_MSG_ATTR_CACHE_PREDEFINED <<
+ OPTEE_MSG_ATTR_CACHE_SHIFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static void optee_get_version(struct tee_device *teedev,
+ struct tee_ioctl_version_data *vers)
+{
+ struct tee_ioctl_version_data v = {
+ .impl_id = TEE_IMPL_ID_OPTEE,
+ .impl_caps = TEE_OPTEE_CAP_TZ,
+ .gen_caps = TEE_GEN_CAP_GP,
+ };
+ *vers = v;
+}
+
+static int optee_open(struct tee_context *ctx)
+{
+ struct optee_context_data *ctxdata;
+ struct tee_device *teedev = ctx->teedev;
+ struct optee *optee = tee_get_drvdata(teedev);
+
+ ctxdata = kzalloc(sizeof(*ctxdata), GFP_KERNEL);
+ if (!ctxdata)
+ return -ENOMEM;
+
+ if (teedev == optee->supp_teedev) {
+ bool busy = true;
+
+ mutex_lock(&optee->supp.ctx_mutex);
+ if (!optee->supp.ctx) {
+ busy = false;
+ optee->supp.ctx = ctx;
+ }
+ mutex_unlock(&optee->supp.ctx_mutex);
+ if (busy) {
+ kfree(ctxdata);
+ return -EBUSY;
+ }
+ }
+
+ mutex_init(&ctxdata->mutex);
+ INIT_LIST_HEAD(&ctxdata->sess_list);
+
+ ctx->data = ctxdata;
+ return 0;
+}
+
+static void optee_release(struct tee_context *ctx)
+{
+ struct optee_context_data *ctxdata = ctx->data;
+ struct tee_device *teedev = ctx->teedev;
+ struct optee *optee = tee_get_drvdata(teedev);
+ struct tee_shm *shm;
+ struct optee_msg_arg *arg = NULL;
+ phys_addr_t parg;
+ struct optee_session *sess;
+ struct optee_session *sess_tmp;
+
+ if (!ctxdata)
+ return;
+
+ shm = tee_shm_alloc(ctx, sizeof(struct optee_msg_arg), TEE_SHM_MAPPED);
+ if (!IS_ERR(shm)) {
+ arg = tee_shm_get_va(shm, 0);
+ /*
+ * If va2pa fails for some reason, we can't call
+ * optee_close_session(), only free the memory. Secure OS
+ * will leak sessions and finally refuse more sessions, but
+ * we will at least let normal world reclaim its memory.
+ */
+ if (!IS_ERR(arg))
+ tee_shm_va2pa(shm, arg, &parg);
+ }
+
+ list_for_each_entry_safe(sess, sess_tmp, &ctxdata->sess_list,
+ list_node) {
+ list_del(&sess->list_node);
+ if (!IS_ERR_OR_NULL(arg)) {
+ memset(arg, 0, sizeof(*arg));
+ arg->cmd = OPTEE_MSG_CMD_CLOSE_SESSION;
+ arg->session = sess->session_id;
+ optee_do_call_with_arg(ctx, parg);
+ }
+ kfree(sess);
+ }
+ kfree(ctxdata);
+
+ if (!IS_ERR(shm))
+ tee_shm_free(shm);
+
+ ctx->data = NULL;
+
+ if (teedev == optee->supp_teedev) {
+ mutex_lock(&optee->supp.ctx_mutex);
+ optee->supp.ctx = NULL;
+ mutex_unlock(&optee->supp.ctx_mutex);
+ }
+}
+
+static struct tee_driver_ops optee_ops = {
+ .get_version = optee_get_version,
+ .open = optee_open,
+ .release = optee_release,
+ .open_session = optee_open_session,
+ .close_session = optee_close_session,
+ .invoke_func = optee_invoke_func,
+ .cancel_req = optee_cancel_req,
+};
+
+static struct tee_desc optee_desc = {
+ .name = DRIVER_NAME "-clnt",
+ .ops = &optee_ops,
+ .owner = THIS_MODULE,
+};
+
+static struct tee_driver_ops optee_supp_ops = {
+ .get_version = optee_get_version,
+ .open = optee_open,
+ .release = optee_release,
+ .supp_recv = optee_supp_recv,
+ .supp_send = optee_supp_send,
+};
+
+static struct tee_desc optee_supp_desc = {
+ .name = DRIVER_NAME "-supp",
+ .ops = &optee_supp_ops,
+ .owner = THIS_MODULE,
+ .flags = TEE_DESC_PRIVILEGED,
+};
+
+static bool optee_msg_api_uid_is_optee_api(optee_invoke_fn *invoke_fn)
+{
+ struct arm_smccc_res res;
+
+ invoke_fn(OPTEE_SMC_CALLS_UID, 0, 0, 0, 0, 0, 0, 0, &res);
+
+ if (res.a0 == OPTEE_MSG_UID_0 && res.a1 == OPTEE_MSG_UID_1 &&
+ res.a2 == OPTEE_MSG_UID_2 && res.a3 == OPTEE_MSG_UID_3)
+ return true;
+ return false;
+}
+
+static bool optee_msg_api_revision_is_compatible(optee_invoke_fn *invoke_fn)
+{
+ union {
+ struct arm_smccc_res smccc;
+ struct optee_smc_calls_revision_result result;
+ } res;
+
+ invoke_fn(OPTEE_SMC_CALLS_REVISION, 0, 0, 0, 0, 0, 0, 0, &res.smccc);
+
+ if (res.result.major == OPTEE_MSG_REVISION_MAJOR &&
+ (int)res.result.minor >= OPTEE_MSG_REVISION_MINOR)
+ return true;
+ return false;
+}
+
+static bool optee_msg_exchange_capabilities(optee_invoke_fn *invoke_fn,
+ u32 *sec_caps)
+{
+ union {
+ struct arm_smccc_res smccc;
+ struct optee_smc_exchange_capabilities_result result;
+ } res;
+ u32 a1 = 0;
+
+ /*
+ * TODO This isn't enough to tell if it's UP system (from kernel
+ * point of view) or not, is_smp() returns the the information
+ * needed, but can't be called directly from here.
+ */
+#ifndef CONFIG_SMP
+ a1 |= OPTEE_SMC_NSEC_CAP_UNIPROCESSOR;
+#endif
+
+ invoke_fn(OPTEE_SMC_EXCHANGE_CAPABILITIES, a1, 0, 0, 0, 0, 0, 0,
+ &res.smccc);
+
+ if (res.result.status != OPTEE_SMC_RETURN_OK)
+ return false;
+
+ *sec_caps = res.result.capabilities;
+ return true;
+}
+
+static struct tee_shm_pool *
+optee_config_shm_ioremap(struct device *dev, optee_invoke_fn *invoke_fn,
+ void __iomem **ioremaped_shm)
+{
+ union {
+ struct arm_smccc_res smccc;
+ struct optee_smc_get_shm_config_result result;
+ } res;
+ struct tee_shm_pool *pool;
+ unsigned long vaddr;
+ phys_addr_t paddr;
+ size_t size;
+ phys_addr_t begin;
+ phys_addr_t end;
+ void __iomem *va;
+ struct tee_shm_pool_mem_info priv_info;
+ struct tee_shm_pool_mem_info dmabuf_info;
+
+ invoke_fn(OPTEE_SMC_GET_SHM_CONFIG, 0, 0, 0, 0, 0, 0, 0, &res.smccc);
+ if (res.result.status != OPTEE_SMC_RETURN_OK) {
+ dev_info(dev, "shm service not available\n");
+ return ERR_PTR(-ENOENT);
+ }
+
+ if (res.result.settings != OPTEE_SMC_SHM_CACHED) {
+ dev_err(dev, "only normal cached shared memory supported\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ begin = roundup(res.result.start, PAGE_SIZE);
+ end = rounddown(res.result.start + res.result.size, PAGE_SIZE);
+ paddr = begin;
+ size = end - begin;
+
+ if (size < 2 * OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE) {
+ dev_err(dev, "too small shared memory area\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ va = ioremap_cache(paddr, size);
+ if (!va) {
+ dev_err(dev, "shared memory ioremap failed\n");
+ return ERR_PTR(-EINVAL);
+ }
+ vaddr = (unsigned long)va;
+
+ priv_info.vaddr = vaddr;
+ priv_info.paddr = paddr;
+ priv_info.size = OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE;
+ dmabuf_info.vaddr = vaddr + OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE;
+ dmabuf_info.paddr = paddr + OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE;
+ dmabuf_info.size = size - OPTEE_SHM_NUM_PRIV_PAGES * PAGE_SIZE;
+
+ pool = tee_shm_pool_alloc_res_mem(dev, &priv_info, &dmabuf_info);
+ if (IS_ERR(pool)) {
+ iounmap(va);
+ goto out;
+ }
+
+ *ioremaped_shm = va;
+out:
+ return pool;
+}
+
+static int get_invoke_func(struct device *dev, optee_invoke_fn **invoke_fn)
+{
+ struct device_node *np = dev->of_node;
+ const char *method;
+
+ dev_info(dev, "probing for conduit method from DT.\n");
+
+ if (of_property_read_string(np, "method", &method)) {
+ dev_warn(dev, "missing \"method\" property\n");
+ return -ENXIO;
+ }
+
+ if (!strcmp("hvc", method)) {
+ *invoke_fn = arm_smccc_hvc;
+ } else if (!strcmp("smc", method)) {
+ *invoke_fn = arm_smccc_smc;
+ } else {
+ dev_warn(dev, "invalid \"method\" property: %s\n", method);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int optee_probe(struct platform_device *pdev)
+{
+ optee_invoke_fn *invoke_fn;
+ struct tee_shm_pool *pool;
+ struct optee *optee = NULL;
+ void __iomem *ioremaped_shm = NULL;
+ struct tee_device *teedev;
+ u32 sec_caps;
+ int rc;
+
+ rc = get_invoke_func(&pdev->dev, &invoke_fn);
+ if (rc)
+ return rc;
+
+ if (!optee_msg_api_uid_is_optee_api(invoke_fn)) {
+ dev_warn(&pdev->dev, "api uid mismatch\n");
+ return -EINVAL;
+ }
+
+ if (!optee_msg_api_revision_is_compatible(invoke_fn)) {
+ dev_warn(&pdev->dev, "api revision mismatch\n");
+ return -EINVAL;
+ }
+
+ if (!optee_msg_exchange_capabilities(invoke_fn, &sec_caps)) {
+ dev_warn(&pdev->dev, "capabilities mismatch\n");
+ return -EINVAL;
+ }
+
+ /*
+ * We have no other option for shared memory, if secure world
+ * doesn't have any reserved memory we can use we can't continue.
+ */
+ if (!(sec_caps & OPTEE_SMC_SEC_CAP_HAVE_RESERVERED_SHM))
+ return -EINVAL;
+
+ pool = optee_config_shm_ioremap(&pdev->dev, invoke_fn, &ioremaped_shm);
+ if (IS_ERR(pool))
+ return PTR_ERR(pool);
+
+ optee = devm_kzalloc(&pdev->dev, sizeof(*optee), GFP_KERNEL);
+ if (!optee) {
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ optee->dev = &pdev->dev;
+ optee->invoke_fn = invoke_fn;
+
+ teedev = tee_device_alloc(&optee_desc, &pdev->dev, pool, optee);
+ if (IS_ERR(teedev)) {
+ rc = PTR_ERR(teedev);
+ goto err;
+ }
+ optee->teedev = teedev;
+
+ teedev = tee_device_alloc(&optee_supp_desc, &pdev->dev, pool, optee);
+ if (IS_ERR(teedev)) {
+ rc = PTR_ERR(teedev);
+ goto err;
+ }
+ optee->supp_teedev = teedev;
+
+ rc = tee_device_register(optee->teedev);
+ if (rc)
+ goto err;
+
+ rc = tee_device_register(optee->supp_teedev);
+ if (rc)
+ goto err;
+
+ mutex_init(&optee->call_queue.mutex);
+ INIT_LIST_HEAD(&optee->call_queue.waiters);
+ optee_wait_queue_init(&optee->wait_queue);
+ optee_supp_init(&optee->supp);
+ optee->ioremaped_shm = ioremaped_shm;
+ optee->pool = pool;
+
+ platform_set_drvdata(pdev, optee);
+
+ optee_enable_shm_cache(optee);
+
+ dev_info(&pdev->dev, "initialized driver\n");
+ return 0;
+err:
+ if (optee) {
+ /*
+ * tee_device_unregister() is safe to call even if the
+ * devices hasn't been registered with
+ * tee_device_register() yet.
+ */
+ tee_device_unregister(optee->supp_teedev);
+ tee_device_unregister(optee->teedev);
+ }
+ if (pool)
+ tee_shm_pool_free(pool);
+ if (ioremaped_shm)
+ iounmap(ioremaped_shm);
+ return rc;
+}
+
+static int optee_remove(struct platform_device *pdev)
+{
+ struct optee *optee = platform_get_drvdata(pdev);
+
+ /*
+ * Ask OP-TEE to free all cached shared memory objects to decrease
+ * reference counters and also avoid wild pointers in secure world
+ * into the old shared memory range.
+ */
+ optee_disable_shm_cache(optee);
+
+ /*
+ * The two devices has to be unregistered before we can free the
+ * other resources.
+ */
+ tee_device_unregister(optee->supp_teedev);
+ tee_device_unregister(optee->teedev);
+
+ tee_shm_pool_free(optee->pool);
+ if (optee->ioremaped_shm)
+ iounmap(optee->ioremaped_shm);
+ optee_wait_queue_exit(&optee->wait_queue);
+ optee_supp_uninit(&optee->supp);
+ mutex_destroy(&optee->call_queue.mutex);
+
+ return 0;
+}
+
+static const struct of_device_id optee_match[] = {
+ { .compatible = "linaro,optee-tz" },
+ {},
+};
+
+static struct platform_driver optee_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = optee_match,
+ },
+ .probe = optee_probe,
+ .remove = optee_remove,
+};
+
+static int __init optee_driver_init(void)
+{
+ struct device_node *node;
+
+ /*
+ * Preferred path is /firmware/optee, but it's the matching that
+ * matters.
+ */
+ for_each_matching_node(node, optee_match)
+ of_platform_device_create(node, NULL, NULL);
+
+ return platform_driver_register(&optee_driver);
+}
+module_init(optee_driver_init);
+
+static void __exit optee_driver_exit(void)
+{
+ platform_driver_unregister(&optee_driver);
+}
+module_exit(optee_driver_exit);
+
+MODULE_AUTHOR("Linaro");
+MODULE_DESCRIPTION("OP-TEE driver");
+MODULE_SUPPORTED_DEVICE("");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h
new file mode 100644
index 0000000..3c0a912
--- /dev/null
+++ b/drivers/tee/optee/optee_msg.h
@@ -0,0 +1,435 @@
+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _OPTEE_MSG_H
+#define _OPTEE_MSG_H
+
+#include <linux/bitops.h>
+#include <linux/types.h>
+
+/*
+ * This file defines the OP-TEE message protocol used to communicate
+ * with an instance of OP-TEE running in secure world.
+ *
+ * This file is divided into three sections.
+ * 1. Formatting of messages.
+ * 2. Requests from normal world
+ * 3. Requests from secure world, Remote Procedure Call (RPC), handled by
+ * tee-supplicant.
+ */
+
+/*****************************************************************************
+ * Part 1 - formatting of messages
+ *****************************************************************************/
+
+#define OPTEE_MSG_ATTR_TYPE_NONE 0x0
+#define OPTEE_MSG_ATTR_TYPE_VALUE_INPUT 0x1
+#define OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT 0x2
+#define OPTEE_MSG_ATTR_TYPE_VALUE_INOUT 0x3
+#define OPTEE_MSG_ATTR_TYPE_RMEM_INPUT 0x5
+#define OPTEE_MSG_ATTR_TYPE_RMEM_OUTPUT 0x6
+#define OPTEE_MSG_ATTR_TYPE_RMEM_INOUT 0x7
+#define OPTEE_MSG_ATTR_TYPE_TMEM_INPUT 0x9
+#define OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT 0xa
+#define OPTEE_MSG_ATTR_TYPE_TMEM_INOUT 0xb
+
+#define OPTEE_MSG_ATTR_TYPE_MASK GENMASK(7, 0)
+
+/*
+ * Meta parameter to be absorbed by the Secure OS and not passed
+ * to the Trusted Application.
+ *
+ * Currently only used with OPTEE_MSG_CMD_OPEN_SESSION.
+ */
+#define OPTEE_MSG_ATTR_META BIT(8)
+
+/*
+ * The temporary shared memory object is not physically contigous and this
+ * temp memref is followed by another fragment until the last temp memref
+ * that doesn't have this bit set.
+ */
+#define OPTEE_MSG_ATTR_FRAGMENT BIT(9)
+
+/*
+ * Memory attributes for caching passed with temp memrefs. The actual value
+ * used is defined outside the message protocol with the exception of
+ * OPTEE_MSG_ATTR_CACHE_PREDEFINED which means the attributes already
+ * defined for the memory range should be used. If optee_smc.h is used as
+ * bearer of this protocol OPTEE_SMC_SHM_* is used for values.
+ */
+#define OPTEE_MSG_ATTR_CACHE_SHIFT 16
+#define OPTEE_MSG_ATTR_CACHE_MASK GENMASK(2, 0)
+#define OPTEE_MSG_ATTR_CACHE_PREDEFINED 0
+
+/*
+ * Same values as TEE_LOGIN_* from TEE Internal API
+ */
+#define OPTEE_MSG_LOGIN_PUBLIC 0x00000000
+#define OPTEE_MSG_LOGIN_USER 0x00000001
+#define OPTEE_MSG_LOGIN_GROUP 0x00000002
+#define OPTEE_MSG_LOGIN_APPLICATION 0x00000004
+#define OPTEE_MSG_LOGIN_APPLICATION_USER 0x00000005
+#define OPTEE_MSG_LOGIN_APPLICATION_GROUP 0x00000006
+
+/**
+ * struct optee_msg_param_tmem - temporary memory reference parameter
+ * @buf_ptr: Address of the buffer
+ * @size: Size of the buffer
+ * @shm_ref: Temporary shared memory reference, pointer to a struct tee_shm
+ *
+ * Secure and normal world communicates pointers as physical address
+ * instead of the virtual address. This is because secure and normal world
+ * have completely independent memory mapping. Normal world can even have a
+ * hypervisor which need to translate the guest physical address (AKA IPA
+ * in ARM documentation) to a real physical address before passing the
+ * structure to secure world.
+ */
+struct optee_msg_param_tmem {
+ u64 buf_ptr;
+ u64 size;
+ u64 shm_ref;
+};
+
+/**
+ * struct optee_msg_param_rmem - registered memory reference parameter
+ * @offs: Offset into shared memory reference
+ * @size: Size of the buffer
+ * @shm_ref: Shared memory reference, pointer to a struct tee_shm
+ */
+struct optee_msg_param_rmem {
+ u64 offs;
+ u64 size;
+ u64 shm_ref;
+};
+
+/**
+ * struct optee_msg_param_value - opaque value parameter
+ *
+ * Value parameters are passed unchecked between normal and secure world.
+ */
+struct optee_msg_param_value {
+ u64 a;
+ u64 b;
+ u64 c;
+};
+
+/**
+ * struct optee_msg_param - parameter used together with struct optee_msg_arg
+ * @attr: attributes
+ * @tmem: parameter by temporary memory reference
+ * @rmem: parameter by registered memory reference
+ * @value: parameter by opaque value
+ *
+ * @attr & OPTEE_MSG_ATTR_TYPE_MASK indicates if tmem, rmem or value is used in
+ * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value,
+ * OPTEE_MSG_ATTR_TYPE_TMEM_* indicates tmem and
+ * OPTEE_MSG_ATTR_TYPE_RMEM_* indicates rmem.
+ * OPTEE_MSG_ATTR_TYPE_NONE indicates that none of the members are used.
+ */
+struct optee_msg_param {
+ u64 attr;
+ union {
+ struct optee_msg_param_tmem tmem;
+ struct optee_msg_param_rmem rmem;
+ struct optee_msg_param_value value;
+ } u;
+};
+
+/**
+ * struct optee_msg_arg - call argument
+ * @cmd: Command, one of OPTEE_MSG_CMD_* or OPTEE_MSG_RPC_CMD_*
+ * @func: Trusted Application function, specific to the Trusted Application,
+ * used if cmd == OPTEE_MSG_CMD_INVOKE_COMMAND
+ * @session: In parameter for all OPTEE_MSG_CMD_* except
+ * OPTEE_MSG_CMD_OPEN_SESSION where it's an output parameter instead
+ * @cancel_id: Cancellation id, a unique value to identify this request
+ * @ret: return value
+ * @ret_origin: origin of the return value
+ * @num_params: number of parameters supplied to the OS Command
+ * @params: the parameters supplied to the OS Command
+ *
+ * All normal calls to Trusted OS uses this struct. If cmd requires further
+ * information than what these field holds it can be passed as a parameter
+ * tagged as meta (setting the OPTEE_MSG_ATTR_META bit in corresponding
+ * attrs field). All parameters tagged as meta has to come first.
+ *
+ * Temp memref parameters can be fragmented if supported by the Trusted OS
+ * (when optee_smc.h is bearer of this protocol this is indicated with
+ * OPTEE_SMC_SEC_CAP_UNREGISTERED_SHM). If a logical memref parameter is
+ * fragmented then has all but the last fragment the
+ * OPTEE_MSG_ATTR_FRAGMENT bit set in attrs. Even if a memref is fragmented
+ * it will still be presented as a single logical memref to the Trusted
+ * Application.
+ */
+struct optee_msg_arg {
+ u32 cmd;
+ u32 func;
+ u32 session;
+ u32 cancel_id;
+ u32 pad;
+ u32 ret;
+ u32 ret_origin;
+ u32 num_params;
+
+ /*
+ * this struct is 8 byte aligned since the 'struct optee_msg_param'
+ * which follows requires 8 byte alignment.
+ *
+ * Commented out element used to visualize the layout dynamic part
+ * of the struct. This field is not available at all if
+ * num_params == 0.
+ *
+ * params is accessed through the macro OPTEE_MSG_GET_PARAMS
+ *
+ * struct optee_msg_param params[num_params];
+ */
+} __aligned(8);
+
+/**
+ * OPTEE_MSG_GET_PARAMS - return pointer to struct optee_msg_param *
+ *
+ * @x: Pointer to a struct optee_msg_arg
+ *
+ * Returns a pointer to the params[] inside a struct optee_msg_arg.
+ */
+#define OPTEE_MSG_GET_PARAMS(x) \
+ (struct optee_msg_param *)(((struct optee_msg_arg *)(x)) + 1)
+
+/**
+ * OPTEE_MSG_GET_ARG_SIZE - return size of struct optee_msg_arg
+ *
+ * @num_params: Number of parameters embedded in the struct optee_msg_arg
+ *
+ * Returns the size of the struct optee_msg_arg together with the number
+ * of embedded parameters.
+ */
+#define OPTEE_MSG_GET_ARG_SIZE(num_params) \
+ (sizeof(struct optee_msg_arg) + \
+ sizeof(struct optee_msg_param) * (num_params))
+
+/*****************************************************************************
+ * Part 2 - requests from normal world
+ *****************************************************************************/
+
+/*
+ * Return the following UID if using API specified in this file without
+ * further extensions:
+ * 384fb3e0-e7f8-11e3-af63-0002a5d5c51b.
+ * Represented in 4 32-bit words in OPTEE_MSG_UID_0, OPTEE_MSG_UID_1,
+ * OPTEE_MSG_UID_2, OPTEE_MSG_UID_3.
+ */
+#define OPTEE_MSG_UID_0 0x384fb3e0
+#define OPTEE_MSG_UID_1 0xe7f811e3
+#define OPTEE_MSG_UID_2 0xaf630002
+#define OPTEE_MSG_UID_3 0xa5d5c51b
+#define OPTEE_MSG_FUNCID_CALLS_UID 0xFF01
+
+/*
+ * Returns 2.0 if using API specified in this file without further
+ * extensions. Represented in 2 32-bit words in OPTEE_MSG_REVISION_MAJOR
+ * and OPTEE_MSG_REVISION_MINOR
+ */
+#define OPTEE_MSG_REVISION_MAJOR 2
+#define OPTEE_MSG_REVISION_MINOR 0
+#define OPTEE_MSG_FUNCID_CALLS_REVISION 0xFF03
+
+/*
+ * Get UUID of Trusted OS.
+ *
+ * Used by non-secure world to figure out which Trusted OS is installed.
+ * Note that returned UUID is the UUID of the Trusted OS, not of the API.
+ *
+ * Returns UUID in 4 32-bit words in the same way as
+ * OPTEE_MSG_FUNCID_CALLS_UID described above.
+ */
+#define OPTEE_MSG_OS_OPTEE_UUID_0 0x486178e0
+#define OPTEE_MSG_OS_OPTEE_UUID_1 0xe7f811e3
+#define OPTEE_MSG_OS_OPTEE_UUID_2 0xbc5e0002
+#define OPTEE_MSG_OS_OPTEE_UUID_3 0xa5d5c51b
+#define OPTEE_MSG_FUNCID_GET_OS_UUID 0x0000
+
+/*
+ * Get revision of Trusted OS.
+ *
+ * Used by non-secure world to figure out which version of the Trusted OS
+ * is installed. Note that the returned revision is the revision of the
+ * Trusted OS, not of the API.
+ *
+ * Returns revision in 2 32-bit words in the same way as
+ * OPTEE_MSG_CALLS_REVISION described above.
+ */
+#define OPTEE_MSG_OS_OPTEE_REVISION_MAJOR 1
+#define OPTEE_MSG_OS_OPTEE_REVISION_MINOR 0
+#define OPTEE_MSG_FUNCID_GET_OS_REVISION 0x0001
+
+/*
+ * Do a secure call with struct optee_msg_arg as argument
+ * The OPTEE_MSG_CMD_* below defines what goes in struct optee_msg_arg::cmd
+ *
+ * OPTEE_MSG_CMD_OPEN_SESSION opens a session to a Trusted Application.
+ * The first two parameters are tagged as meta, holding two value
+ * parameters to pass the following information:
+ * param[0].u.value.a-b uuid of Trusted Application
+ * param[1].u.value.a-b uuid of Client
+ * param[1].u.value.c Login class of client OPTEE_MSG_LOGIN_*
+ *
+ * OPTEE_MSG_CMD_INVOKE_COMMAND invokes a command a previously opened
+ * session to a Trusted Application. struct optee_msg_arg::func is Trusted
+ * Application function, specific to the Trusted Application.
+ *
+ * OPTEE_MSG_CMD_CLOSE_SESSION closes a previously opened session to
+ * Trusted Application.
+ *
+ * OPTEE_MSG_CMD_CANCEL cancels a currently invoked command.
+ *
+ * OPTEE_MSG_CMD_REGISTER_SHM registers a shared memory reference. The
+ * information is passed as:
+ * [in] param[0].attr OPTEE_MSG_ATTR_TYPE_TMEM_INPUT
+ * [| OPTEE_MSG_ATTR_FRAGMENT]
+ * [in] param[0].u.tmem.buf_ptr physical address (of first fragment)
+ * [in] param[0].u.tmem.size size (of first fragment)
+ * [in] param[0].u.tmem.shm_ref holds shared memory reference
+ * ...
+ * The shared memory can optionally be fragmented, temp memrefs can follow
+ * each other with all but the last with the OPTEE_MSG_ATTR_FRAGMENT bit set.
+ *
+ * OPTEE_MSG_CMD_UNREGISTER_SHM unregisteres a previously registered shared
+ * memory reference. The information is passed as:
+ * [in] param[0].attr OPTEE_MSG_ATTR_TYPE_RMEM_INPUT
+ * [in] param[0].u.rmem.shm_ref holds shared memory reference
+ * [in] param[0].u.rmem.offs 0
+ * [in] param[0].u.rmem.size 0
+ */
+#define OPTEE_MSG_CMD_OPEN_SESSION 0
+#define OPTEE_MSG_CMD_INVOKE_COMMAND 1
+#define OPTEE_MSG_CMD_CLOSE_SESSION 2
+#define OPTEE_MSG_CMD_CANCEL 3
+#define OPTEE_MSG_CMD_REGISTER_SHM 4
+#define OPTEE_MSG_CMD_UNREGISTER_SHM 5
+#define OPTEE_MSG_FUNCID_CALL_WITH_ARG 0x0004
+
+/*****************************************************************************
+ * Part 3 - Requests from secure world, RPC
+ *****************************************************************************/
+
+/*
+ * All RPC is done with a struct optee_msg_arg as bearer of information,
+ * struct optee_msg_arg::arg holds values defined by OPTEE_MSG_RPC_CMD_* below
+ *
+ * RPC communication with tee-supplicant is reversed compared to normal
+ * client communication desribed above. The supplicant receives requests
+ * and sends responses.
+ */
+
+/*
+ * Load a TA into memory, defined in tee-supplicant
+ */
+#define OPTEE_MSG_RPC_CMD_LOAD_TA 0
+
+/*
+ * Reserved
+ */
+#define OPTEE_MSG_RPC_CMD_RPMB 1
+
+/*
+ * File system access, defined in tee-supplicant
+ */
+#define OPTEE_MSG_RPC_CMD_FS 2
+
+/*
+ * Get time
+ *
+ * Returns number of seconds and nano seconds since the Epoch,
+ * 1970-01-01 00:00:00 +0000 (UTC).
+ *
+ * [out] param[0].u.value.a Number of seconds
+ * [out] param[0].u.value.b Number of nano seconds.
+ */
+#define OPTEE_MSG_RPC_CMD_GET_TIME 3
+
+/*
+ * Wait queue primitive, helper for secure world to implement a wait queue
+ *
+ * Waiting on a key
+ * [in] param[0].u.value.a OPTEE_MSG_RPC_WAIT_QUEUE_SLEEP
+ * [in] param[0].u.value.b wait key
+ *
+ * Waking up a key
+ * [in] param[0].u.value.a OPTEE_MSG_RPC_WAIT_QUEUE_WAKEUP
+ * [in] param[0].u.value.b wakeup key
+ */
+#define OPTEE_MSG_RPC_CMD_WAIT_QUEUE 4
+#define OPTEE_MSG_RPC_WAIT_QUEUE_SLEEP 0
+#define OPTEE_MSG_RPC_WAIT_QUEUE_WAKEUP 1
+
+/*
+ * Suspend execution
+ *
+ * [in] param[0].value .a number of milliseconds to suspend
+ */
+#define OPTEE_MSG_RPC_CMD_SUSPEND 5
+
+/*
+ * Allocate a piece of shared memory
+ *
+ * Shared memory can optionally be fragmented, to support that additional
+ * spare param entries are allocated to make room for eventual fragments.
+ * The spare param entries has .attr = OPTEE_MSG_ATTR_TYPE_NONE when
+ * unused. All returned temp memrefs except the last should have the
+ * OPTEE_MSG_ATTR_FRAGMENT bit set in the attr field.
+ *
+ * [in] param[0].u.value.a type of memory one of
+ * OPTEE_MSG_RPC_SHM_TYPE_* below
+ * [in] param[0].u.value.b requested size
+ * [in] param[0].u.value.c required alignment
+ *
+ * [out] param[0].u.tmem.buf_ptr physical address (of first fragment)
+ * [out] param[0].u.tmem.size size (of first fragment)
+ * [out] param[0].u.tmem.shm_ref shared memory reference
+ * ...
+ * [out] param[n].u.tmem.buf_ptr physical address
+ * [out] param[n].u.tmem.size size
+ * [out] param[n].u.tmem.shm_ref shared memory reference (same value
+ * as in param[n-1].u.tmem.shm_ref)
+ */
+#define OPTEE_MSG_RPC_CMD_SHM_ALLOC 6
+/* Memory that can be shared with a non-secure user space application */
+#define OPTEE_MSG_RPC_SHM_TYPE_APPL 0
+/* Memory only shared with non-secure kernel */
+#define OPTEE_MSG_RPC_SHM_TYPE_KERNEL 1
+
+/*
+ * Free shared memory previously allocated with OPTEE_MSG_RPC_CMD_SHM_ALLOC
+ *
+ * [in] param[0].u.value.a type of memory one of
+ * OPTEE_MSG_RPC_SHM_TYPE_* above
+ * [in] param[0].u.value.b value of shared memory reference
+ * returned in param[0].u.tmem.shm_ref
+ * above
+ */
+#define OPTEE_MSG_RPC_CMD_SHM_FREE 7
+
+#endif /* _OPTEE_MSG_H */
diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
new file mode 100644
index 0000000..807f74c
--- /dev/null
+++ b/drivers/tee/optee/optee_private.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef OPTEE_PRIVATE_H
+#define OPTEE_PRIVATE_H
+
+#include <linux/arm-smccc.h>
+#include <linux/semaphore.h>
+#include <linux/tee_drv.h>
+#include <linux/types.h>
+#include "optee_msg.h"
+
+#define OPTEE_MAX_ARG_SIZE 1024
+
+/* Some Global Platform error codes used in this driver */
+#define TEEC_SUCCESS 0x00000000
+#define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006
+#define TEEC_ERROR_COMMUNICATION 0xFFFF000E
+#define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C
+
+#define TEEC_ORIGIN_COMMS 0x00000002
+
+typedef void (optee_invoke_fn)(unsigned long, unsigned long, unsigned long,
+ unsigned long, unsigned long, unsigned long,
+ unsigned long, unsigned long,
+ struct arm_smccc_res *);
+
+struct optee_call_queue {
+ /* Serializes access to this struct */
+ struct mutex mutex;
+ struct list_head waiters;
+};
+
+struct optee_wait_queue {
+ /* Serializes access to this struct */
+ struct mutex mu;
+ struct list_head db;
+};
+
+/**
+ * struct optee_supp - supplicant synchronization struct
+ * @ctx the context of current connected supplicant.
+ * if !NULL the supplicant device is available for use,
+ * else busy
+ * @ctx_mutex: held while accessing @ctx
+ * @func: supplicant function id to call
+ * @ret: call return value
+ * @num_params: number of elements in @param
+ * @param: parameters for @func
+ * @req_posted: if true, a request has been posted to the supplicant
+ * @supp_next_send: if true, next step is for supplicant to send response
+ * @thrd_mutex: held by the thread doing a request to supplicant
+ * @supp_mutex: held by supplicant while operating on this struct
+ * @data_to_supp: supplicant is waiting on this for next request
+ * @data_from_supp: requesting thread is waiting on this to get the result
+ */
+struct optee_supp {
+ struct tee_context *ctx;
+ /* Serializes access of ctx */
+ struct mutex ctx_mutex;
+
+ u32 func;
+ u32 ret;
+ size_t num_params;
+ struct tee_param *param;
+
+ bool req_posted;
+ bool supp_next_send;
+ /* Serializes access to this struct for requesting thread */
+ struct mutex thrd_mutex;
+ /* Serializes access to this struct for supplicant threads */
+ struct mutex supp_mutex;
+ struct completion data_to_supp;
+ struct completion data_from_supp;
+};
+
+/**
+ * struct optee - main service struct
+ * @supp_teedev: supplicant device
+ * @teedev: client device
+ * @dev: probed device
+ * @invoke_fn: function to issue smc or hvc
+ * @call_queue: queue of threads waiting to call @invoke_fn
+ * @wait_queue: queue of threads from secure world waiting for a
+ * secure world sync object
+ * @supp: supplicant synchronization struct for RPC to supplicant
+ * @pool: shared memory pool
+ * @ioremaped_shm virtual address of memory in shared memory pool
+ */
+struct optee {
+ struct tee_device *supp_teedev;
+ struct tee_device *teedev;
+ struct device *dev;
+ optee_invoke_fn *invoke_fn;
+ struct optee_call_queue call_queue;
+ struct optee_wait_queue wait_queue;
+ struct optee_supp supp;
+ struct tee_shm_pool *pool;
+ void __iomem *ioremaped_shm;
+};
+
+struct optee_session {
+ struct list_head list_node;
+ u32 session_id;
+};
+
+struct optee_context_data {
+ /* Serializes access to this struct */
+ struct mutex mutex;
+ struct list_head sess_list;
+};
+
+struct optee_rpc_param {
+ u32 a0;
+ u32 a1;
+ u32 a2;
+ u32 a3;
+ u32 a4;
+ u32 a5;
+ u32 a6;
+ u32 a7;
+};
+
+void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param);
+
+void optee_wait_queue_init(struct optee_wait_queue *wq);
+void optee_wait_queue_exit(struct optee_wait_queue *wq);
+
+u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params,
+ struct tee_param *param);
+
+int optee_supp_read(struct tee_context *ctx, void __user *buf, size_t len);
+int optee_supp_write(struct tee_context *ctx, void __user *buf, size_t len);
+void optee_supp_init(struct optee_supp *supp);
+void optee_supp_uninit(struct optee_supp *supp);
+
+int optee_supp_recv(struct tee_context *ctx, u32 *func, u32 *num_params,
+ struct tee_param *param);
+int optee_supp_send(struct tee_context *ctx, u32 ret, u32 num_params,
+ struct tee_param *param);
+
+u32 optee_do_call_with_arg(struct tee_context *ctx, phys_addr_t parg);
+int optee_open_session(struct tee_context *ctx,
+ struct tee_ioctl_open_session_arg *arg,
+ struct tee_param *param);
+int optee_close_session(struct tee_context *ctx, u32 session);
+int optee_invoke_func(struct tee_context *ctx, struct tee_ioctl_invoke_arg *arg,
+ struct tee_param *param);
+int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session);
+
+void optee_enable_shm_cache(struct optee *optee);
+void optee_disable_shm_cache(struct optee *optee);
+
+int optee_from_msg_param(struct tee_param *params, size_t num_params,
+ const struct optee_msg_param *msg_params);
+int optee_to_msg_param(struct optee_msg_param *msg_params, size_t num_params,
+ const struct tee_param *params);
+
+/*
+ * Small helpers
+ */
+
+static inline void *reg_pair_to_ptr(u32 reg0, u32 reg1)
+{
+ return (void *)(unsigned long)(((u64)reg0 << 32) | reg1);
+}
+
+static inline void reg_pair_from_64(u32 *reg0, u32 *reg1, u64 val)
+{
+ *reg0 = val >> 32;
+ *reg1 = val;
+}
+
+#endif /*OPTEE_PRIVATE_H*/
diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h
new file mode 100644
index 0000000..ff98cb7
--- /dev/null
+++ b/drivers/tee/optee/optee_smc.h
@@ -0,0 +1,446 @@
+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef OPTEE_SMC_H
+#define OPTEE_SMC_H
+
+#include <linux/arm-smccc.h>
+#include <linux/bitops.h>
+
+#define OPTEE_SMC_STD_CALL_VAL(func_num) \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_32, \
+ ARM_SMCCC_OWNER_TRUSTED_OS, (func_num))
+#define OPTEE_SMC_FAST_CALL_VAL(func_num) \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_32, \
+ ARM_SMCCC_OWNER_TRUSTED_OS, (func_num))
+
+/*
+ * Function specified by SMC Calling convention.
+ */
+#define OPTEE_SMC_FUNCID_CALLS_COUNT 0xFF00
+#define OPTEE_SMC_CALLS_COUNT \
+ ARM_SMCCC_CALL_VAL(OPTEE_SMC_FAST_CALL, SMCCC_SMC_32, \
+ SMCCC_OWNER_TRUSTED_OS_END, \
+ OPTEE_SMC_FUNCID_CALLS_COUNT)
+
+/*
+ * Normal cached memory (write-back), shareable for SMP systems and not
+ * shareable for UP systems.
+ */
+#define OPTEE_SMC_SHM_CACHED 1
+
+/*
+ * a0..a7 is used as register names in the descriptions below, on arm32
+ * that translates to r0..r7 and on arm64 to w0..w7. In both cases it's
+ * 32-bit registers.
+ */
+
+/*
+ * Function specified by SMC Calling convention
+ *
+ * Return one of the following UIDs if using API specified in this file
+ * without further extentions:
+ * 65cb6b93-af0c-4617-8ed6-644a8d1140f8
+ * see also OPTEE_SMC_UID_* in optee_msg.h
+ */
+#define OPTEE_SMC_FUNCID_CALLS_UID OPTEE_MSG_FUNCID_CALLS_UID
+#define OPTEE_SMC_CALLS_UID \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_32, \
+ ARM_SMCCC_OWNER_TRUSTED_OS_END, \
+ OPTEE_SMC_FUNCID_CALLS_UID)
+
+/*
+ * Function specified by SMC Calling convention
+ *
+ * Returns 2.0 if using API specified in this file without further extentions.
+ * see also OPTEE_MSG_REVISION_* in optee_msg.h
+ */
+#define OPTEE_SMC_FUNCID_CALLS_REVISION OPTEE_MSG_FUNCID_CALLS_REVISION
+#define OPTEE_SMC_CALLS_REVISION \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_32, \
+ ARM_SMCCC_OWNER_TRUSTED_OS_END, \
+ OPTEE_SMC_FUNCID_CALLS_REVISION)
+
+struct optee_smc_calls_revision_result {
+ unsigned long major;
+ unsigned long minor;
+ unsigned long reserved0;
+ unsigned long reserved1;
+};
+
+/*
+ * Get UUID of Trusted OS.
+ *
+ * Used by non-secure world to figure out which Trusted OS is installed.
+ * Note that returned UUID is the UUID of the Trusted OS, not of the API.
+ *
+ * Returns UUID in a0-4 in the same way as OPTEE_SMC_CALLS_UID
+ * described above.
+ */
+#define OPTEE_SMC_FUNCID_GET_OS_UUID OPTEE_MSG_FUNCID_GET_OS_UUID
+#define OPTEE_SMC_CALL_GET_OS_UUID \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_OS_UUID)
+
+/*
+ * Get revision of Trusted OS.
+ *
+ * Used by non-secure world to figure out which version of the Trusted OS
+ * is installed. Note that the returned revision is the revision of the
+ * Trusted OS, not of the API.
+ *
+ * Returns revision in a0-1 in the same way as OPTEE_SMC_CALLS_REVISION
+ * described above.
+ */
+#define OPTEE_SMC_FUNCID_GET_OS_REVISION OPTEE_MSG_FUNCID_GET_OS_REVISION
+#define OPTEE_SMC_CALL_GET_OS_REVISION \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_OS_REVISION)
+
+/*
+ * Call with struct optee_msg_arg as argument
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC*CALL_WITH_ARG
+ * a1 Upper 32bit of a 64bit physical pointer to a struct optee_msg_arg
+ * a2 Lower 32bit of a 64bit physical pointer to a struct optee_msg_arg
+ * a3 Cache settings, not used if physical pointer is in a predefined shared
+ * memory area else per OPTEE_SMC_SHM_*
+ * a4-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 Return value, OPTEE_SMC_RETURN_*
+ * a1-3 Not used
+ * a4-7 Preserved
+ *
+ * OPTEE_SMC_RETURN_ETHREAD_LIMIT return register usage:
+ * a0 Return value, OPTEE_SMC_RETURN_ETHREAD_LIMIT
+ * a1-3 Preserved
+ * a4-7 Preserved
+ *
+ * RPC return register usage:
+ * a0 Return value, OPTEE_SMC_RETURN_IS_RPC(val)
+ * a1-2 RPC parameters
+ * a3-7 Resume information, must be preserved
+ *
+ * Possible return values:
+ * OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Trusted OS does not recognize this
+ * function.
+ * OPTEE_SMC_RETURN_OK Call completed, result updated in
+ * the previously supplied struct
+ * optee_msg_arg.
+ * OPTEE_SMC_RETURN_ETHREAD_LIMIT Number of Trusted OS threads exceeded,
+ * try again later.
+ * OPTEE_SMC_RETURN_EBADADDR Bad physcial pointer to struct
+ * optee_msg_arg.
+ * OPTEE_SMC_RETURN_EBADCMD Bad/unknown cmd in struct optee_msg_arg
+ * OPTEE_SMC_RETURN_IS_RPC() Call suspended by RPC call to normal
+ * world.
+ */
+#define OPTEE_SMC_FUNCID_CALL_WITH_ARG OPTEE_MSG_FUNCID_CALL_WITH_ARG
+#define OPTEE_SMC_CALL_WITH_ARG \
+ OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_CALL_WITH_ARG)
+
+/*
+ * Get Shared Memory Config
+ *
+ * Returns the Secure/Non-secure shared memory config.
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_GET_SHM_CONFIG
+ * a1-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Have config return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1 Physical address of start of SHM
+ * a2 Size of of SHM
+ * a3 Cache settings of memory, as defined by the
+ * OPTEE_SMC_SHM_* values above
+ * a4-7 Preserved
+ *
+ * Not available register usage:
+ * a0 OPTEE_SMC_RETURN_ENOTAVAIL
+ * a1-3 Not used
+ * a4-7 Preserved
+ */
+#define OPTEE_SMC_FUNCID_GET_SHM_CONFIG 7
+#define OPTEE_SMC_GET_SHM_CONFIG \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_SHM_CONFIG)
+
+struct optee_smc_get_shm_config_result {
+ unsigned long status;
+ unsigned long start;
+ unsigned long size;
+ unsigned long settings;
+};
+
+/*
+ * Exchanges capabilities between normal world and secure world
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_EXCHANGE_CAPABILITIES
+ * a1 bitfield of normal world capabilities OPTEE_SMC_NSEC_CAP_*
+ * a2-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1 bitfield of secure world capabilities OPTEE_SMC_SEC_CAP_*
+ * a2-7 Preserved
+ *
+ * Error return register usage:
+ * a0 OPTEE_SMC_RETURN_ENOTAVAIL, can't use the capabilities from normal world
+ * a1 bitfield of secure world capabilities OPTEE_SMC_SEC_CAP_*
+ * a2-7 Preserved
+ */
+/* Normal world works as a uniprocessor system */
+#define OPTEE_SMC_NSEC_CAP_UNIPROCESSOR BIT(0)
+/* Secure world has reserved shared memory for normal world to use */
+#define OPTEE_SMC_SEC_CAP_HAVE_RESERVERED_SHM BIT(0)
+/* Secure world can communicate via previously unregistered shared memory */
+#define OPTEE_SMC_SEC_CAP_UNREGISTERED_SHM BIT(1)
+#define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES 9
+#define OPTEE_SMC_EXCHANGE_CAPABILITIES \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES)
+
+struct optee_smc_exchange_capabilities_result {
+ unsigned long status;
+ unsigned long capabilities;
+ unsigned long reserved0;
+ unsigned long reserved1;
+};
+
+/*
+ * Disable and empties cache of shared memory objects
+ *
+ * Secure world can cache frequently used shared memory objects, for
+ * example objects used as RPC arguments. When secure world is idle this
+ * function returns one shared memory reference to free. To disable the
+ * cache and free all cached objects this function has to be called until
+ * it returns OPTEE_SMC_RETURN_ENOTAVAIL.
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_DISABLE_SHM_CACHE
+ * a1-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1 Upper 32bit of a 64bit Shared memory cookie
+ * a2 Lower 32bit of a 64bit Shared memory cookie
+ * a3-7 Preserved
+ *
+ * Cache empty return register usage:
+ * a0 OPTEE_SMC_RETURN_ENOTAVAIL
+ * a1-7 Preserved
+ *
+ * Not idle return register usage:
+ * a0 OPTEE_SMC_RETURN_EBUSY
+ * a1-7 Preserved
+ */
+#define OPTEE_SMC_FUNCID_DISABLE_SHM_CACHE 10
+#define OPTEE_SMC_DISABLE_SHM_CACHE \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_DISABLE_SHM_CACHE)
+
+struct optee_smc_disable_shm_cache_result {
+ unsigned long status;
+ unsigned long shm_upper32;
+ unsigned long shm_lower32;
+ unsigned long reserved0;
+};
+
+/*
+ * Enable cache of shared memory objects
+ *
+ * Secure world can cache frequently used shared memory objects, for
+ * example objects used as RPC arguments. When secure world is idle this
+ * function returns OPTEE_SMC_RETURN_OK and the cache is enabled. If
+ * secure world isn't idle OPTEE_SMC_RETURN_EBUSY is returned.
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_ENABLE_SHM_CACHE
+ * a1-6 Not used
+ * a7 Hypervisor Client ID register
+ *
+ * Normal return register usage:
+ * a0 OPTEE_SMC_RETURN_OK
+ * a1-7 Preserved
+ *
+ * Not idle return register usage:
+ * a0 OPTEE_SMC_RETURN_EBUSY
+ * a1-7 Preserved
+ */
+#define OPTEE_SMC_FUNCID_ENABLE_SHM_CACHE 11
+#define OPTEE_SMC_ENABLE_SHM_CACHE \
+ OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_ENABLE_SHM_CACHE)
+
+/*
+ * Resume from RPC (for example after processing an IRQ)
+ *
+ * Call register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC
+ * a1-3 Value of a1-3 when OPTEE_SMC_CALL_WITH_ARG returned
+ * OPTEE_SMC_RETURN_RPC in a0
+ *
+ * Return register usage is the same as for OPTEE_SMC_*CALL_WITH_ARG above.
+ *
+ * Possible return values
+ * OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Trusted OS does not recognize this
+ * function.
+ * OPTEE_SMC_RETURN_OK Original call completed, result
+ * updated in the previously supplied.
+ * struct optee_msg_arg
+ * OPTEE_SMC_RETURN_RPC Call suspended by RPC call to normal
+ * world.
+ * OPTEE_SMC_RETURN_ERESUME Resume failed, the opaque resume
+ * information was corrupt.
+ */
+#define OPTEE_SMC_FUNCID_RETURN_FROM_RPC 3
+#define OPTEE_SMC_CALL_RETURN_FROM_RPC \
+ OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_RETURN_FROM_RPC)
+
+#define OPTEE_SMC_RETURN_RPC_PREFIX_MASK 0xFFFF0000
+#define OPTEE_SMC_RETURN_RPC_PREFIX 0xFFFF0000
+#define OPTEE_SMC_RETURN_RPC_FUNC_MASK 0x0000FFFF
+
+#define OPTEE_SMC_RETURN_GET_RPC_FUNC(ret) \
+ ((ret) & OPTEE_SMC_RETURN_RPC_FUNC_MASK)
+
+#define OPTEE_SMC_RPC_VAL(func) ((func) | OPTEE_SMC_RETURN_RPC_PREFIX)
+
+/*
+ * Allocate memory for RPC parameter passing. The memory is used to hold a
+ * struct optee_msg_arg.
+ *
+ * "Call" register usage:
+ * a0 This value, OPTEE_SMC_RETURN_RPC_ALLOC
+ * a1 Size in bytes of required argument memory
+ * a2 Not used
+ * a3 Resume information, must be preserved
+ * a4-5 Not used
+ * a6-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1 Upper 32bits of 64bit physical pointer to allocated
+ * memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can't
+ * be allocated.
+ * a2 Lower 32bits of 64bit physical pointer to allocated
+ * memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can't
+ * be allocated
+ * a3 Preserved
+ * a4 Upper 32bits of 64bit Shared memory cookie used when freeing
+ * the memory or doing an RPC
+ * a5 Lower 32bits of 64bit Shared memory cookie used when freeing
+ * the memory or doing an RPC
+ * a6-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_ALLOC 0
+#define OPTEE_SMC_RETURN_RPC_ALLOC \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_ALLOC)
+
+/*
+ * Free memory previously allocated by OPTEE_SMC_RETURN_RPC_ALLOC
+ *
+ * "Call" register usage:
+ * a0 This value, OPTEE_SMC_RETURN_RPC_FREE
+ * a1 Upper 32bits of 64bit shared memory cookie belonging to this
+ * argument memory
+ * a2 Lower 32bits of 64bit shared memory cookie belonging to this
+ * argument memory
+ * a3-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1-2 Not used
+ * a3-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_FREE 2
+#define OPTEE_SMC_RETURN_RPC_FREE \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_FREE)
+
+/*
+ * Deliver an IRQ in normal world.
+ *
+ * "Call" register usage:
+ * a0 OPTEE_SMC_RETURN_RPC_IRQ
+ * a1-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_IRQ 4
+#define OPTEE_SMC_RETURN_RPC_IRQ \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_IRQ)
+
+/*
+ * Do an RPC request. The supplied struct optee_msg_arg tells which
+ * request to do and the parameters for the request. The following fields
+ * are used (the rest are unused):
+ * - cmd the Request ID
+ * - ret return value of the request, filled in by normal world
+ * - num_params number of parameters for the request
+ * - params the parameters
+ * - param_attrs attributes of the parameters
+ *
+ * "Call" register usage:
+ * a0 OPTEE_SMC_RETURN_RPC_CMD
+ * a1 Upper 32bit of a 64bit Shared memory cookie holding a
+ * struct optee_msg_arg, must be preserved, only the data should
+ * be updated
+ * a2 Lower 32bit of a 64bit Shared memory cookie holding a
+ * struct optee_msg_arg, must be preserved, only the data should
+ * be updated
+ * a3-7 Resume information, must be preserved
+ *
+ * "Return" register usage:
+ * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC.
+ * a1-2 Not used
+ * a3-7 Preserved
+ */
+#define OPTEE_SMC_RPC_FUNC_CMD 5
+#define OPTEE_SMC_RETURN_RPC_CMD \
+ OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_CMD)
+
+/* Returned in a0 */
+#define OPTEE_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF
+
+/* Returned in a0 only from Trusted OS functions */
+#define OPTEE_SMC_RETURN_OK 0x0
+#define OPTEE_SMC_RETURN_ETHREAD_LIMIT 0x1
+#define OPTEE_SMC_RETURN_EBUSY 0x2
+#define OPTEE_SMC_RETURN_ERESUME 0x3
+#define OPTEE_SMC_RETURN_EBADADDR 0x4
+#define OPTEE_SMC_RETURN_EBADCMD 0x5
+#define OPTEE_SMC_RETURN_ENOMEM 0x6
+#define OPTEE_SMC_RETURN_ENOTAVAIL 0x7
+#define OPTEE_SMC_RETURN_IS_RPC(ret) \
+ (((ret) != OPTEE_SMC_RETURN_UNKNOWN_FUNCTION) && \
+ ((((ret) & OPTEE_SMC_RETURN_RPC_PREFIX_MASK) == \
+ OPTEE_SMC_RETURN_RPC_PREFIX)))
+
+#endif /* OPTEE_SMC_H */
diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c
new file mode 100644
index 0000000..0b9c1a2
--- /dev/null
+++ b/drivers/tee/optee/rpc.c
@@ -0,0 +1,404 @@
+/*
+ * Copyright (c) 2015-2016, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include "optee_private.h"
+#include "optee_smc.h"
+
+struct wq_entry {
+ struct list_head link;
+ struct completion c;
+ u32 key;
+};
+
+void optee_wait_queue_init(struct optee_wait_queue *priv)
+{
+ mutex_init(&priv->mu);
+ INIT_LIST_HEAD(&priv->db);
+}
+
+void optee_wait_queue_exit(struct optee_wait_queue *priv)
+{
+ mutex_destroy(&priv->mu);
+}
+
+static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg)
+{
+ struct optee_msg_param *params;
+ struct timespec64 ts;
+
+ if (arg->num_params != 1)
+ goto bad;
+ params = OPTEE_MSG_GET_PARAMS(arg);
+ if ((params->attr & OPTEE_MSG_ATTR_TYPE_MASK) !=
+ OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT)
+ goto bad;
+
+ getnstimeofday64(&ts);
+ params->u.value.a = ts.tv_sec;
+ params->u.value.b = ts.tv_nsec;
+
+ arg->ret = TEEC_SUCCESS;
+ return;
+bad:
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+
+static struct wq_entry *wq_entry_get(struct optee_wait_queue *wq, u32 key)
+{
+ struct wq_entry *w;
+
+ mutex_lock(&wq->mu);
+
+ list_for_each_entry(w, &wq->db, link)
+ if (w->key == key)
+ goto out;
+
+ w = kmalloc(sizeof(*w), GFP_KERNEL);
+ if (w) {
+ init_completion(&w->c);
+ w->key = key;
+ list_add_tail(&w->link, &wq->db);
+ }
+out:
+ mutex_unlock(&wq->mu);
+ return w;
+}
+
+static void wq_sleep(struct optee_wait_queue *wq, u32 key)
+{
+ struct wq_entry *w = wq_entry_get(wq, key);
+
+ if (w) {
+ wait_for_completion(&w->c);
+ mutex_lock(&wq->mu);
+ list_del(&w->link);
+ mutex_unlock(&wq->mu);
+ kfree(w);
+ }
+}
+
+static void wq_wakeup(struct optee_wait_queue *wq, u32 key)
+{
+ struct wq_entry *w = wq_entry_get(wq, key);
+
+ if (w)
+ complete(&w->c);
+}
+
+static void handle_rpc_func_cmd_wq(struct optee *optee,
+ struct optee_msg_arg *arg)
+{
+ struct optee_msg_param *params;
+
+ if (arg->num_params != 1)
+ goto bad;
+
+ params = OPTEE_MSG_GET_PARAMS(arg);
+ if ((params->attr & OPTEE_MSG_ATTR_TYPE_MASK) !=
+ OPTEE_MSG_ATTR_TYPE_VALUE_INPUT)
+ goto bad;
+
+ switch (params->u.value.a) {
+ case OPTEE_MSG_RPC_WAIT_QUEUE_SLEEP:
+ wq_sleep(&optee->wait_queue, params->u.value.b);
+ break;
+ case OPTEE_MSG_RPC_WAIT_QUEUE_WAKEUP:
+ wq_wakeup(&optee->wait_queue, params->u.value.b);
+ break;
+ default:
+ goto bad;
+ }
+
+ arg->ret = TEEC_SUCCESS;
+ return;
+bad:
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+
+static void handle_rpc_func_cmd_wait(struct optee_msg_arg *arg)
+{
+ struct optee_msg_param *params;
+ u32 msec_to_wait;
+
+ if (arg->num_params != 1)
+ goto bad;
+
+ params = OPTEE_MSG_GET_PARAMS(arg);
+ if ((params->attr & OPTEE_MSG_ATTR_TYPE_MASK) !=
+ OPTEE_MSG_ATTR_TYPE_VALUE_INPUT)
+ goto bad;
+
+ msec_to_wait = params->u.value.a;
+
+ /* set task's state to interruptible sleep */
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ /* take a nap */
+ schedule_timeout(msecs_to_jiffies(msec_to_wait));
+
+ arg->ret = TEEC_SUCCESS;
+ return;
+bad:
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+
+static void handle_rpc_supp_cmd(struct tee_context *ctx,
+ struct optee_msg_arg *arg)
+{
+ struct tee_param *params;
+ struct optee_msg_param *msg_params = OPTEE_MSG_GET_PARAMS(arg);
+
+ arg->ret_origin = TEEC_ORIGIN_COMMS;
+
+ params = kmalloc_array(arg->num_params, sizeof(struct tee_param),
+ GFP_KERNEL);
+ if (!params) {
+ arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
+ return;
+ }
+
+ if (optee_from_msg_param(params, arg->num_params, msg_params)) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ goto out;
+ }
+
+ arg->ret = optee_supp_thrd_req(ctx, arg->cmd, arg->num_params, params);
+
+ if (optee_to_msg_param(msg_params, arg->num_params, params))
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+out:
+ kfree(params);
+}
+
+static struct tee_shm *cmd_alloc_suppl(struct tee_context *ctx, size_t sz)
+{
+ u32 ret;
+ struct tee_param param;
+ struct optee *optee = tee_get_drvdata(ctx->teedev);
+ struct tee_shm *shm;
+
+ param.attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
+ param.u.value.a = OPTEE_MSG_RPC_SHM_TYPE_APPL;
+ param.u.value.b = sz;
+ param.u.value.c = 0;
+
+ ret = optee_supp_thrd_req(ctx, OPTEE_MSG_RPC_CMD_SHM_ALLOC, 1, ¶m);
+ if (ret)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_lock(&optee->supp.ctx_mutex);
+ /* Increases count as secure world doesn't have a reference */
+ shm = tee_shm_get_from_id(optee->supp.ctx, param.u.value.c);
+ mutex_unlock(&optee->supp.ctx_mutex);
+ return shm;
+}
+
+static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
+ struct optee_msg_arg *arg)
+{
+ struct optee_msg_param *params = OPTEE_MSG_GET_PARAMS(arg);
+ phys_addr_t pa;
+ struct tee_shm *shm;
+ size_t sz;
+ size_t n;
+
+ arg->ret_origin = TEEC_ORIGIN_COMMS;
+
+ if (!arg->num_params ||
+ params->attr != OPTEE_MSG_ATTR_TYPE_VALUE_INPUT) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ for (n = 1; n < arg->num_params; n++) {
+ if (params[n].attr != OPTEE_MSG_ATTR_TYPE_NONE) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+ }
+
+ sz = params->u.value.b;
+ switch (params->u.value.a) {
+ case OPTEE_MSG_RPC_SHM_TYPE_APPL:
+ shm = cmd_alloc_suppl(ctx, sz);
+ break;
+ case OPTEE_MSG_RPC_SHM_TYPE_KERNEL:
+ shm = tee_shm_alloc(ctx, sz, TEE_SHM_MAPPED);
+ break;
+ default:
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ if (IS_ERR(shm)) {
+ arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
+ return;
+ }
+
+ if (tee_shm_get_pa(shm, 0, &pa)) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ goto bad;
+ }
+
+ params[0].attr = OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT;
+ params[0].u.tmem.buf_ptr = pa;
+ params[0].u.tmem.size = sz;
+ params[0].u.tmem.shm_ref = (unsigned long)shm;
+ arg->ret = TEEC_SUCCESS;
+ return;
+bad:
+ tee_shm_free(shm);
+}
+
+static void cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm)
+{
+ struct tee_param param;
+
+ param.attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
+ param.u.value.a = OPTEE_MSG_RPC_SHM_TYPE_APPL;
+ param.u.value.b = tee_shm_get_id(shm);
+ param.u.value.c = 0;
+
+ /*
+ * Match the tee_shm_get_from_id() in cmd_alloc_suppl() as secure
+ * world has released its reference.
+ *
+ * It's better to do this before sending the request to supplicant
+ * as we'd like to let the process doing the initial allocation to
+ * do release the last reference too in order to avoid stacking
+ * many pending fput() on the client process. This could otherwise
+ * happen if secure world does many allocate and free in a single
+ * invoke.
+ */
+ tee_shm_put(shm);
+
+ optee_supp_thrd_req(ctx, OPTEE_MSG_RPC_CMD_SHM_FREE, 1, ¶m);
+}
+
+static void handle_rpc_func_cmd_shm_free(struct tee_context *ctx,
+ struct optee_msg_arg *arg)
+{
+ struct optee_msg_param *params = OPTEE_MSG_GET_PARAMS(arg);
+ struct tee_shm *shm;
+
+ arg->ret_origin = TEEC_ORIGIN_COMMS;
+
+ if (arg->num_params != 1 ||
+ params->attr != OPTEE_MSG_ATTR_TYPE_VALUE_INPUT) {
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ return;
+ }
+
+ shm = (struct tee_shm *)(unsigned long)params->u.value.b;
+ switch (params->u.value.a) {
+ case OPTEE_MSG_RPC_SHM_TYPE_APPL:
+ cmd_free_suppl(ctx, shm);
+ break;
+ case OPTEE_MSG_RPC_SHM_TYPE_KERNEL:
+ tee_shm_free(shm);
+ break;
+ default:
+ arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+ }
+ arg->ret = TEEC_SUCCESS;
+}
+
+static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee,
+ struct tee_shm *shm)
+{
+ struct optee_msg_arg *arg;
+
+ arg = tee_shm_get_va(shm, 0);
+ if (IS_ERR(arg)) {
+ dev_err(optee->dev, "%s: tee_shm_get_va %p failed\n",
+ __func__, shm);
+ return;
+ }
+
+ switch (arg->cmd) {
+ case OPTEE_MSG_RPC_CMD_GET_TIME:
+ handle_rpc_func_cmd_get_time(arg);
+ break;
+ case OPTEE_MSG_RPC_CMD_WAIT_QUEUE:
+ handle_rpc_func_cmd_wq(optee, arg);
+ break;
+ case OPTEE_MSG_RPC_CMD_SUSPEND:
+ handle_rpc_func_cmd_wait(arg);
+ break;
+ case OPTEE_MSG_RPC_CMD_SHM_ALLOC:
+ handle_rpc_func_cmd_shm_alloc(ctx, arg);
+ break;
+ case OPTEE_MSG_RPC_CMD_SHM_FREE:
+ handle_rpc_func_cmd_shm_free(ctx, arg);
+ break;
+ default:
+ handle_rpc_supp_cmd(ctx, arg);
+ }
+}
+
+/**
+ * optee_handle_rpc() - handle RPC from secure world
+ * @ctx: context doing the RPC
+ * @param: value of registers for the RPC
+ *
+ * Result of RPC is written back into @param.
+ */
+void optee_handle_rpc(struct tee_context *ctx, struct optee_rpc_param *param)
+{
+ struct tee_device *teedev = ctx->teedev;
+ struct optee *optee = tee_get_drvdata(teedev);
+ struct tee_shm *shm;
+ phys_addr_t pa;
+
+ switch (OPTEE_SMC_RETURN_GET_RPC_FUNC(param->a0)) {
+ case OPTEE_SMC_RPC_FUNC_ALLOC:
+ shm = tee_shm_alloc(ctx, param->a1, TEE_SHM_MAPPED);
+ if (!IS_ERR(shm) && !tee_shm_get_pa(shm, 0, &pa)) {
+ reg_pair_from_64(¶m->a1, ¶m->a2, pa);
+ reg_pair_from_64(¶m->a4, ¶m->a5,
+ (unsigned long)shm);
+ } else {
+ param->a1 = 0;
+ param->a2 = 0;
+ param->a4 = 0;
+ param->a5 = 0;
+ }
+ break;
+ case OPTEE_SMC_RPC_FUNC_FREE:
+ shm = reg_pair_to_ptr(param->a1, param->a2);
+ tee_shm_free(shm);
+ break;
+ case OPTEE_SMC_RPC_FUNC_IRQ:
+ /*
+ * An IRQ was raised while secure world was executing,
+ * since all IRQs are handled in Linux a dummy RPC is
+ * performed to let Linux take the IRQ through the normal
+ * vector.
+ */
+ break;
+ case OPTEE_SMC_RPC_FUNC_CMD:
+ shm = reg_pair_to_ptr(param->a1, param->a2);
+ handle_rpc_func_cmd(ctx, optee, shm);
+ break;
+ default:
+ dev_warn(optee->dev, "Unknown RPC func 0x%x\n",
+ (u32)OPTEE_SMC_RETURN_GET_RPC_FUNC(param->a0));
+ break;
+ }
+
+ param->a0 = OPTEE_SMC_CALL_RETURN_FROM_RPC;
+}
diff --git a/drivers/tee/optee/supp.c b/drivers/tee/optee/supp.c
new file mode 100644
index 0000000..b4ea067
--- /dev/null
+++ b/drivers/tee/optee/supp.c
@@ -0,0 +1,273 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include "optee_private.h"
+
+void optee_supp_init(struct optee_supp *supp)
+{
+ memset(supp, 0, sizeof(*supp));
+ mutex_init(&supp->ctx_mutex);
+ mutex_init(&supp->thrd_mutex);
+ mutex_init(&supp->supp_mutex);
+ init_completion(&supp->data_to_supp);
+ init_completion(&supp->data_from_supp);
+}
+
+void optee_supp_uninit(struct optee_supp *supp)
+{
+ mutex_destroy(&supp->ctx_mutex);
+ mutex_destroy(&supp->thrd_mutex);
+ mutex_destroy(&supp->supp_mutex);
+}
+
+/**
+ * optee_supp_thrd_req() - request service from supplicant
+ * @ctx: context doing the request
+ * @func: function requested
+ * @num_params: number of elements in @param array
+ * @param: parameters for function
+ *
+ * Returns result of operation to be passed to secure world
+ */
+u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params,
+ struct tee_param *param)
+{
+ bool interruptable;
+ struct optee *optee = tee_get_drvdata(ctx->teedev);
+ struct optee_supp *supp = &optee->supp;
+ u32 ret;
+
+ /*
+ * Other threads blocks here until we've copied our answer from
+ * supplicant.
+ */
+ while (mutex_lock_interruptible(&supp->thrd_mutex)) {
+ /* See comment below on when the RPC can be interrupted. */
+ mutex_lock(&supp->ctx_mutex);
+ interruptable = !supp->ctx;
+ mutex_unlock(&supp->ctx_mutex);
+ if (interruptable)
+ return TEEC_ERROR_COMMUNICATION;
+ }
+
+ /*
+ * We have exclusive access now since the supplicant at this
+ * point is either doing a
+ * wait_for_completion_interruptible(&supp->data_to_supp) or is in
+ * userspace still about to do the ioctl() to enter
+ * optee_supp_recv() below.
+ */
+
+ supp->func = func;
+ supp->num_params = num_params;
+ supp->param = param;
+ supp->req_posted = true;
+
+ /* Let supplicant get the data */
+ complete(&supp->data_to_supp);
+
+ /*
+ * Wait for supplicant to process and return result, once we've
+ * returned from wait_for_completion(data_from_supp) we have
+ * exclusive access again.
+ */
+ while (wait_for_completion_interruptible(&supp->data_from_supp)) {
+ mutex_lock(&supp->ctx_mutex);
+ interruptable = !supp->ctx;
+ if (interruptable) {
+ /*
+ * There's no supplicant available and since the
+ * supp->ctx_mutex currently is held none can
+ * become available until the mutex released
+ * again.
+ *
+ * Interrupting an RPC to supplicant is only
+ * allowed as a way of slightly improving the user
+ * experience in case the supplicant hasn't been
+ * started yet. During normal operation the supplicant
+ * will serve all requests in a timely manner and
+ * interrupting then wouldn't make sense.
+ */
+ supp->ret = TEEC_ERROR_COMMUNICATION;
+ init_completion(&supp->data_to_supp);
+ }
+ mutex_unlock(&supp->ctx_mutex);
+ if (interruptable)
+ break;
+ }
+
+ ret = supp->ret;
+ supp->param = NULL;
+ supp->req_posted = false;
+
+ /* We're done, let someone else talk to the supplicant now. */
+ mutex_unlock(&supp->thrd_mutex);
+
+ return ret;
+}
+
+/**
+ * optee_supp_recv() - receive request for supplicant
+ * @ctx: context receiving the request
+ * @func: requested function in supplicant
+ * @num_params: number of elements allocated in @param, updated with number
+ * used elements
+ * @param: space for parameters for @func
+ *
+ * Returns 0 on success or <0 on failure
+ */
+int optee_supp_recv(struct tee_context *ctx, u32 *func, u32 *num_params,
+ struct tee_param *param)
+{
+ struct tee_device *teedev = ctx->teedev;
+ struct optee *optee = tee_get_drvdata(teedev);
+ struct optee_supp *supp = &optee->supp;
+ int rc;
+
+ /*
+ * In case two threads in one supplicant is calling this function
+ * simultaneously we need to protect the data with a mutex which
+ * we'll release before returning.
+ */
+ mutex_lock(&supp->supp_mutex);
+
+ if (supp->supp_next_send) {
+ /*
+ * optee_supp_recv() has been called again without
+ * a optee_supp_send() in between. Supplicant has
+ * probably been restarted before it was able to
+ * write back last result. Abort last request and
+ * wait for a new.
+ */
+ if (supp->req_posted) {
+ supp->ret = TEEC_ERROR_COMMUNICATION;
+ supp->supp_next_send = false;
+ complete(&supp->data_from_supp);
+ }
+ }
+
+ /*
+ * This is where supplicant will be hanging most of the
+ * time, let's make this interruptable so we can easily
+ * restart supplicant if needed.
+ */
+ if (wait_for_completion_interruptible(&supp->data_to_supp)) {
+ rc = -ERESTARTSYS;
+ goto out;
+ }
+
+ /* We have exlusive access to the data */
+
+ if (*num_params < supp->num_params) {
+ /*
+ * Not enough room for parameters, tell supplicant
+ * it failed and abort last request.
+ */
+ supp->ret = TEEC_ERROR_COMMUNICATION;
+ rc = -EINVAL;
+ complete(&supp->data_from_supp);
+ goto out;
+ }
+
+ *func = supp->func;
+ *num_params = supp->num_params;
+ memcpy(param, supp->param,
+ sizeof(struct tee_param) * supp->num_params);
+
+ /* Allow optee_supp_send() below to do its work */
+ supp->supp_next_send = true;
+
+ rc = 0;
+out:
+ mutex_unlock(&supp->supp_mutex);
+ return rc;
+}
+
+/**
+ * optee_supp_send() - send result of request from supplicant
+ * @ctx: context sending result
+ * @ret: return value of request
+ * @num_params: number of parameters returned
+ * @param: returned parameters
+ *
+ * Returns 0 on success or <0 on failure.
+ */
+int optee_supp_send(struct tee_context *ctx, u32 ret, u32 num_params,
+ struct tee_param *param)
+{
+ struct tee_device *teedev = ctx->teedev;
+ struct optee *optee = tee_get_drvdata(teedev);
+ struct optee_supp *supp = &optee->supp;
+ size_t n;
+ int rc = 0;
+
+ /*
+ * We still have exclusive access to the data since that's how we
+ * left it when returning from optee_supp_read().
+ */
+
+ /* See comment on mutex in optee_supp_read() above */
+ mutex_lock(&supp->supp_mutex);
+
+ if (!supp->supp_next_send) {
+ /*
+ * Something strange is going on, supplicant shouldn't
+ * enter optee_supp_send() in this state
+ */
+ rc = -ENOENT;
+ goto out;
+ }
+
+ if (num_params != supp->num_params) {
+ /*
+ * Something is wrong, let supplicant restart. Next call to
+ * optee_supp_recv() will give an error to the requesting
+ * thread and release it.
+ */
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Update out and in/out parameters */
+ for (n = 0; n < num_params; n++) {
+ struct tee_param *p = supp->param + n;
+
+ switch (p->attr) {
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT:
+ p->u.value.a = param[n].u.value.a;
+ p->u.value.b = param[n].u.value.b;
+ p->u.value.c = param[n].u.value.c;
+ break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT:
+ p->u.memref.size = param[n].u.memref.size;
+ break;
+ default:
+ break;
+ }
+ }
+ supp->ret = ret;
+
+ /* Allow optee_supp_recv() above to do its work */
+ supp->supp_next_send = false;
+
+ /* Let the requesting thread continue */
+ complete(&supp->data_from_supp);
+out:
+ mutex_unlock(&supp->supp_mutex);
+ return rc;
+}
--
1.9.1
^ permalink raw reply related
* [PATCH v13 4/5] Documentation: tee subsystem and op-tee driver
From: Jens Wiklander @ 2016-11-18 14:51 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1479480700-554-1-git-send-email-jens.wiklander@linaro.org>
Acked-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
---
Documentation/00-INDEX | 2 +
Documentation/tee.txt | 118 +++++++++++++++++++++++++++++++++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 121 insertions(+)
create mode 100644 Documentation/tee.txt
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 3acc4f1..4a5a887 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -436,6 +436,8 @@ sysrq.txt
- info on the magic SysRq key.
target/
- directory with info on generating TCM v4 fabric .ko modules
+tee.txt
+ - info on the TEE subsystem and drivers
this_cpu_ops.txt
- List rationale behind and the way to use this_cpu operations.
thermal/
diff --git a/Documentation/tee.txt b/Documentation/tee.txt
new file mode 100644
index 0000000..7185993
--- /dev/null
+++ b/Documentation/tee.txt
@@ -0,0 +1,118 @@
+TEE subsystem
+This document describes the TEE subsystem in Linux.
+
+A TEE (Trusted Execution Environment) is a trusted OS running in some
+secure environment, for example, TrustZone on ARM CPUs, or a separate
+secure co-processor etc. A TEE driver handles the details needed to
+communicate with the TEE.
+
+This subsystem deals with:
+
+- Registration of TEE drivers
+
+- Managing shared memory between Linux and the TEE
+
+- Providing a generic API to the TEE
+
+The TEE interface
+=================
+
+include/uapi/linux/tee.h defines the generic interface to a TEE.
+
+User space (the client) connects to the driver by opening /dev/tee[0-9]* or
+/dev/teepriv[0-9]*.
+
+- TEE_IOC_SHM_ALLOC allocates shared memory and returns a file descriptor
+ which user space can mmap. When user space doesn't need the file
+ descriptor any more, it should be closed. When shared memory isn't needed
+ any longer it should be unmapped with munmap() to allow the reuse of
+ memory.
+
+- TEE_IOC_VERSION lets user space know which TEE this driver handles and
+ the its capabilities.
+
+- TEE_IOC_OPEN_SESSION opens a new session to a Trusted Application.
+
+- TEE_IOC_INVOKE invokes a function in a Trusted Application.
+
+- TEE_IOC_CANCEL may cancel an ongoing TEE_IOC_OPEN_SESSION or TEE_IOC_INVOKE.
+
+- TEE_IOC_CLOSE_SESSION closes a session to a Trusted Application.
+
+There are two classes of clients, normal clients and supplicants. The latter is
+a helper process for the TEE to access resources in Linux, for example file
+system access. A normal client opens /dev/tee[0-9]* and a supplicant opens
+/dev/teepriv[0-9].
+
+Much of the communication between clients and the TEE is opaque to the
+driver. The main job for the driver is to receive requests from the
+clients, forward them to the TEE and send back the results. In the case of
+supplicants the communication goes in the other direction, the TEE sends
+requests to the supplicant which then sends back the result.
+
+OP-TEE driver
+=============
+
+The OP-TEE driver handles OP-TEE [1] based TEEs. Currently it is only the ARM
+TrustZone based OP-TEE solution that is supported.
+
+Lowest level of communication with OP-TEE builds on ARM SMC Calling
+Convention (SMCCC) [2], which is the foundation for OP-TEE's SMC interface
+[3] used internally by the driver. Stacked on top of that is OP-TEE Message
+Protocol [4].
+
+OP-TEE SMC interface provides the basic functions required by SMCCC and some
+additional functions specific for OP-TEE. The most interesting functions are:
+
+- OPTEE_SMC_FUNCID_CALLS_UID (part of SMCCC) returns the version information
+ which is then returned by TEE_IOC_VERSION
+
+- OPTEE_SMC_CALL_GET_OS_UUID returns the particular OP-TEE implementation, used
+ to tell, for instance, a TrustZone OP-TEE apart from an OP-TEE running on a
+ separate secure co-processor.
+
+- OPTEE_SMC_CALL_WITH_ARG drives the OP-TEE message protocol
+
+- OPTEE_SMC_GET_SHM_CONFIG lets the driver and OP-TEE agree on which memory
+ range to used for shared memory between Linux and OP-TEE.
+
+The GlobalPlatform TEE Client API [5] is implemented on top of the generic
+TEE API.
+
+Picture of the relationship between the different components in the
+OP-TEE architecture.
+
+ User space Kernel Secure world
+ ~~~~~~~~~~ ~~~~~~ ~~~~~~~~~~~~
+ +--------+ +-------------+
+ | Client | | Trusted |
+ +--------+ | Application |
+ /\ +-------------+
+ || +----------+ /\
+ || |tee- | ||
+ || |supplicant| \/
+ || +----------+ +-------------+
+ \/ /\ | TEE Internal|
+ +-------+ || | API |
+ + TEE | || +--------+--------+ +-------------+
+ | Client| || | TEE | OP-TEE | | OP-TEE |
+ | API | \/ | subsys | driver | | Trusted OS |
+ +-------+----------------+----+-------+----+-----------+-------------+
+ | Generic TEE API | | OP-TEE MSG |
+ | IOCTL (TEE_IOC_*) | | SMCCC (OPTEE_SMC_CALL_*) |
+ +-----------------------------+ +------------------------------+
+
+RPC (Remote Procedure Call) are requests from secure world to kernel driver
+or tee-supplicant. An RPC is identified by a special range of SMCCC return
+values from OPTEE_SMC_CALL_WITH_ARG. RPC messages which are intended for the
+kernel are handled by the kernel driver. Other RPC messages will be forwarded to
+tee-supplicant without further involvement of the driver, except switching
+shared memory buffer representation.
+
+References:
+[1] https://github.com/OP-TEE/optee_os
+[2] http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html
+[3] drivers/tee/optee/optee_smc.h
+[4] drivers/tee/optee/optee_msg.h
+[5] http://www.globalplatform.org/specificationsdevice.asp look for
+ "TEE Client API Specification v1.0" and click download.
diff --git a/MAINTAINERS b/MAINTAINERS
index 84348f2..e50120e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10660,6 +10660,7 @@ S: Maintained
F: include/linux/tee_drv.h
F: include/uapi/linux/tee.h
F: drivers/tee/
+F: Documentation/tee.txt
THUNDERBOLT DRIVER
M: Andreas Noever <andreas.noever@gmail.com>
--
1.9.1
^ permalink raw reply related
* [PATCH v13 5/5] arm64: dt: hikey: Add optee node
From: Jens Wiklander @ 2016-11-18 14:51 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1479480700-554-1-git-send-email-jens.wiklander@linaro.org>
From: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index dba3c13..89c1539 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -406,6 +406,13 @@
};
};
};
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
};
&uart2 {
--
1.9.1
^ permalink raw reply related
* [PATCH v2 5/8] dt-bindings: mfd: Provide human readable defines for TPS65217 interrupts
From: Lee Jones @ 2016-11-18 14:53 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161028123702.21849-6-woogyom.kim@gmail.com>
On Fri, 28 Oct 2016, Milo Kim wrote:
> TPS65217 supports three interrupt sources. This patch enables assigning
> each IRQ number in the charger and power button node. Then corresponding
> IRQ will be requested by each driver.
>
> Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
> ---
> include/dt-bindings/mfd/tps65217.h | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
> create mode 100644 include/dt-bindings/mfd/tps65217.h
>
> diff --git a/include/dt-bindings/mfd/tps65217.h b/include/dt-bindings/mfd/tps65217.h
> new file mode 100644
> index 0000000..cafb9e6
> --- /dev/null
> +++ b/include/dt-bindings/mfd/tps65217.h
> @@ -0,0 +1,26 @@
> +/*
> + * This header provides macros for TI TPS65217 DT bindings.
> + *
> + * Copyright (C) 2016 Texas Instruments
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __DT_BINDINGS_TPS65217_H__
> +#define __DT_BINDINGS_TPS65217_H__
> +
> +#define TPS65217_IRQ_USB 0
> +#define TPS65217_IRQ_AC 1
> +#define TPS65217_IRQ_PB 2
What are "AC" and "PB". Seeing as these are meant to be "human
readable", let's make them more human friendly.
> +#endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply
* [PATCH V8 1/3] tracing: add a possibility of exporting function trace to other places instead of ring buffer only
From: Alexander Shishkin @ 2016-11-18 14:57 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161118092905.769044bf@gandalf.local.home>
Steven Rostedt <rostedt@goodmis.org> writes:
> This looks good to me, although I would like this to go through my tree
> (to make sure it gets all my testing). I understand the next two
> patches depend on this, how would you want to go about that?
>
> One is that I can pull it in the next merge window, and the rest go in
> after that. Or I can take the other two patches with the proper acks as
> well.
I just asked for the last patch be split 4 ways, but otherwise, they
have my acks. If Chunyan can do that, you can take all of them into your
tree.
Thanks,
--
Alex
^ permalink raw reply
* [RESEND PATCH] ARM: dts: stm32f469-disco: Fix memory size from 8MB to 16MB
From: Bruno Meirelles Herrera @ 2016-11-18 14:58 UTC (permalink / raw)
To: linux-arm-kernel
From: Bruno Herrera <bruherrera@gmail.com>
This patch fix memory size to support 16MB of external SDRAM.
Signed-off-by: Bruno Herrera <bruherrera@gmail.com>
---
arch/arm/boot/dts/stm32f469-disco.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 75f4303..fda12a4 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -58,7 +58,7 @@
};
memory {
- reg = <0x00000000 0x800000>;
+ reg = <0x00000000 0x1000000>;
};
aliases {
--
2.9.3 (Apple Git-75)
^ permalink raw reply related
* [RFC 1/6] drm/etnaviv: add binding for the gc320 found in ti socs
From: Robert Nelson @ 2016-11-18 15:07 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1479476068.20533.19.camel@pengutronix.de>
On Fri, Nov 18, 2016 at 7:34 AM, Lucas Stach <l.stach@pengutronix.de> wrote:
> Am Freitag, den 18.11.2016, 12:13 +0000 schrieb Russell King - ARM
> Linux:
>> On Thu, Nov 17, 2016 at 08:53:38PM -0600, Nishanth Menon wrote:
>> > >diff --git a/drivers/gpu/drm/etnaviv/etnaviv_drv.c b/drivers/gpu/drm/etnaviv/etnaviv_drv.c
>> > >index a6799b0..ce51270 100644
>> > >--- a/drivers/gpu/drm/etnaviv/etnaviv_drv.c
>> > >+++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.c
>> > >@@ -653,6 +653,7 @@ static int etnaviv_pdev_remove(struct platform_device *pdev)
>> > > static const struct of_device_id dt_match[] = {
>> > > { .compatible = "fsl,imx-gpu-subsystem" },
>> > > { .compatible = "marvell,dove-gpu-subsystem" },
>> > >+ { .compatible = "ti,gc320-gpu-subsystem" },
>>
>> We need to get away from this ever-increasing set of compatible
>> strings here, as this is not long-term maintainable.
>>
>> What we should have is a common compatible which describes that
>> the node is compatible with this driver, and then use SoC specific
>> compatible strings later if we need to (eg, because of some GPU
>> subsystem SoC specifics.)
>>
>> So, I'd suggest that we update the documentation and add:
>>
>> "vivante,gc-gpu-subsystem"
>>
>> as a common compatible now, and if necessary move on to more specific
>> compatibles if we need to later.
>>
>> Also, I'd strongly suggest that no compatibles should contain the ID
>> number of the GPU core for exactly the same reason - Vivante GPU cores
>> vary according to features, and we don't want to end up with a long
>> list of specific compatibles (eg)
>> "ti,gc2000-and-gc320-and-gc355-gpu-subsystem" because TI
>> decides to integrate a 3d, 2d and VG core.
>>
> All of the above sounds sensible and I would prefer if the patches are
> reworked to take those things into account.
Thanks for reviewing guys, the "vivante,gc-gpu-subsystem" will work
perfectly fine for me, as the etnaviv driver does a great job at auto
detecting the hardware..
Regards,
--
Robert Nelson
https://rcn-ee.com/
^ permalink raw reply
* [RESEND PATCH v1] ARM: dts: stm32f429: Add missing USART3 pin config to STM32F469I-DISCO board
From: Bruno Meirelles Herrera @ 2016-11-18 15:10 UTC (permalink / raw)
To: linux-arm-kernel
Including new STM32 maintainer. Rebased at stm32-dt-for-v4.10-1 and
stm32-dt-for-v4.10-2 branches. It fix the port/pin initialization in
case boot-loader does not configure/initialize the pins.
Fixing line wrapping from last patch
This patch adds USART3 pin configuration on PB10/PA11 pins
for STM32F469I-DISCO board.
Signed-off-by: Bruno Herrera <bruherrera@gmail.com>
---
arch/arm/boot/dts/stm32f429.dtsi | 13 +++++++++++++
arch/arm/boot/dts/stm32f469-disco.dts | 2 ++
2 files changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index e4dae0e..1b8b105 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -316,6 +316,19 @@
};
};
+ usart3_pins_a: usart3 at 0 {
+ pins1 {
+ pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
+ bias-disable;
+ };
+ };
+
usbotg_hs_pins_a: usbotg_hs at 0 {
pins {
pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 8877c00..75f4303 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -79,5 +79,7 @@
};
&usart3 {
+ pinctrl-0 = <&usart3_pins_a>;
+ pinctrl-names = "default";
status = "okay";
};
--
2.9.3 (Apple Git-75)
^ permalink raw reply related
* [PATCH v2 5/8] dt-bindings: mfd: Provide human readable defines for TPS65217 interrupts
From: Tony Lindgren @ 2016-11-18 15:10 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161118145353.GE2301@dell.home>
* Lee Jones <lee.jones@linaro.org> [161118 06:51]:
> On Fri, 28 Oct 2016, Milo Kim wrote:
>
> > TPS65217 supports three interrupt sources. This patch enables assigning
> > each IRQ number in the charger and power button node. Then corresponding
> > IRQ will be requested by each driver.
> >
> > Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
> > ---
> > include/dt-bindings/mfd/tps65217.h | 26 ++++++++++++++++++++++++++
> > 1 file changed, 26 insertions(+)
> > create mode 100644 include/dt-bindings/mfd/tps65217.h
> >
> > diff --git a/include/dt-bindings/mfd/tps65217.h b/include/dt-bindings/mfd/tps65217.h
> > new file mode 100644
> > index 0000000..cafb9e6
> > --- /dev/null
> > +++ b/include/dt-bindings/mfd/tps65217.h
> > @@ -0,0 +1,26 @@
> > +/*
> > + * This header provides macros for TI TPS65217 DT bindings.
> > + *
> > + * Copyright (C) 2016 Texas Instruments
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful, but
> > + * WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> > + * General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along with
> > + * this program. If not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#ifndef __DT_BINDINGS_TPS65217_H__
> > +#define __DT_BINDINGS_TPS65217_H__
> > +
> > +#define TPS65217_IRQ_USB 0
> > +#define TPS65217_IRQ_AC 1
> > +#define TPS65217_IRQ_PB 2
>
> What are "AC" and "PB". Seeing as these are meant to be "human
> readable", let's make them more human friendly.
Good idea. Milo, please do an incremental single follow-up patch as
I already have applied this and the dts changes using it.
Regards,
Tony
^ permalink raw reply
* [PATCH v8 10/16] drivers: iommu: arm-smmu-v3: split probe functions into DT/generic portions
From: Will Deacon @ 2016-11-18 15:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161116152936.22955-11-lorenzo.pieralisi@arm.com>
On Wed, Nov 16, 2016 at 03:29:30PM +0000, Lorenzo Pieralisi wrote:
> Current ARM SMMUv3 probe functions intermingle HW and DT probing in the
> initialization functions to detect and programme the ARM SMMU v3 driver
> features. In order to allow probing the ARM SMMUv3 with other firmwares
> than DT, this patch splits the ARM SMMUv3 init functions into DT and HW
> specific portions so that other FW interfaces (ie ACPI) can reuse the HW
> probing functions and skip the DT portion accordingly.
>
> This patch implements no functional change, only code reshuffling.
>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Acked-by: Will Deacon <will.deacon@arm.com>
> Reviewed-by: Tomasz Nowicki <tn@semihalf.com>
> Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
> Tested-by: Tomasz Nowicki <tn@semihalf.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Hanjun Guo <hanjun.guo@linaro.org>
> Cc: Robin Murphy <robin.murphy@arm.com>
> Cc: Joerg Roedel <joro@8bytes.org>
> ---
> drivers/iommu/arm-smmu-v3.c | 46 +++++++++++++++++++++++++++++----------------
> 1 file changed, 30 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> index e6e1c87..ed563307 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -2381,10 +2381,10 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass)
> return 0;
> }
>
> -static int arm_smmu_device_probe(struct arm_smmu_device *smmu)
> +static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
> {
> u32 reg;
> - bool coherent;
> + bool coherent = smmu->features & ARM_SMMU_FEAT_COHERENCY;
>
> /* IDR0 */
> reg = readl_relaxed(smmu->base + ARM_SMMU_IDR0);
> @@ -2436,13 +2436,9 @@ static int arm_smmu_device_probe(struct arm_smmu_device *smmu)
> smmu->features |= ARM_SMMU_FEAT_HYP;
>
> /*
> - * The dma-coherent property is used in preference to the ID
> + * The coherency feature as set by FW is used in preference to the ID
> * register, but warn on mismatch.
> */
> - coherent = of_dma_is_coherent(smmu->dev->of_node);
> - if (coherent)
> - smmu->features |= ARM_SMMU_FEAT_COHERENCY;
> -
> if (!!(reg & IDR0_COHACC) != coherent)
> dev_warn(smmu->dev, "IDR0.COHACC overridden by dma-coherent property (%s)\n",
> coherent ? "true" : "false");
> @@ -2563,21 +2559,37 @@ static int arm_smmu_device_probe(struct arm_smmu_device *smmu)
> return 0;
> }
>
> -static int arm_smmu_device_dt_probe(struct platform_device *pdev)
> +static int arm_smmu_device_dt_probe(struct platform_device *pdev,
> + struct arm_smmu_device *smmu,
> + bool *bypass)
> {
> - int irq, ret;
> - struct resource *res;
> - struct arm_smmu_device *smmu;
> struct device *dev = &pdev->dev;
> - bool bypass = true;
> u32 cells;
>
> + *bypass = true;
> +
> if (of_property_read_u32(dev->of_node, "#iommu-cells", &cells))
> dev_err(dev, "missing #iommu-cells property\n");
> else if (cells != 1)
> dev_err(dev, "invalid #iommu-cells value (%d)\n", cells);
> else
> - bypass = false;
> + *bypass = false;
> +
> + parse_driver_options(smmu);
> +
> + if (of_dma_is_coherent(dev->of_node))
> + smmu->features |= ARM_SMMU_FEAT_COHERENCY;
> +
> + return 0;
I know you're only moving code here, but the *bypass output parameter
now seems to be redundant with the unconditional return 0. Given that
we only set bypass to true if something went wrong, why don't we return
-ENODEV in those cases, kill the bypass parameter and rework the return
value check in the caller so that, rather than fail the probe, we pass
bypass=true to the reset function?
Will
^ permalink raw reply
* [PATCH v8 11/16] drivers: iommu: arm-smmu-v3: add IORT configuration
From: Will Deacon @ 2016-11-18 15:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161116152936.22955-12-lorenzo.pieralisi@arm.com>
On Wed, Nov 16, 2016 at 03:29:31PM +0000, Lorenzo Pieralisi wrote:
> In ACPI bases systems, in order to be able to create platform
> devices and initialize them for ARM SMMU v3 components, the IORT
> kernel implementation requires a set of static functions to be
> used by the IORT kernel layer to configure platform devices for
> ARM SMMU v3 components.
>
> Add static configuration functions to the IORT kernel layer for
> the ARM SMMU v3 components, so that the ARM SMMU v3 driver can
> initialize its respective platform device by relying on the IORT
> kernel infrastructure and by adding a corresponding ACPI device
> early probe section entry.
>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Reviewed-by: Tomasz Nowicki <tn@semihalf.com>
> Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
> Tested-by: Tomasz Nowicki <tn@semihalf.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Robin Murphy <robin.murphy@arm.com>
> Cc: Joerg Roedel <joro@8bytes.org>
> ---
> drivers/acpi/arm64/iort.c | 103 +++++++++++++++++++++++++++++++++++++++++++-
> drivers/iommu/arm-smmu-v3.c | 49 ++++++++++++++++++++-
> 2 files changed, 150 insertions(+), 2 deletions(-)
[...]
> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> index ed563307..9315bf3 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -20,6 +20,8 @@
> * This driver is powered by bad coffee and bombay mix.
> */
>
> +#include <linux/acpi.h>
> +#include <linux/acpi_iort.h>
> #include <linux/delay.h>
> #include <linux/dma-iommu.h>
> #include <linux/err.h>
> @@ -2559,6 +2561,36 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
> return 0;
> }
>
> +#ifdef CONFIG_ACPI
> +static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
> + struct arm_smmu_device *smmu,
> + bool *bypass)
> +{
> + struct acpi_iort_smmu_v3 *iort_smmu;
> + struct device *dev = smmu->dev;
> + struct acpi_iort_node *node;
> +
> + node = *(struct acpi_iort_node **)dev_get_platdata(dev);
> +
> + /* Retrieve SMMUv3 specific data */
> + iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
> +
> + if (iort_smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE)
> + smmu->features |= ARM_SMMU_FEAT_COHERENCY;
> +
> + *bypass = false;
> +
> + return 0;
> +}
> +#else
> +static inline int arm_smmu_device_acpi_probe(struct platform_device *pdev,
> + struct arm_smmu_device *smmu,
> + bool *bypass)
> +{
> + return -ENODEV;
> +}
> +#endif
Same bypass comments as before, but you'll probably need to do something
so that you *can* abort the probe if !ACPI, perhaps by allocating two
error codes to distinguish the "I no nothing about this SMMU" from "I know
enough to put it into bypass, but nothing more".
Will
^ permalink raw reply
* [PATCH v8 12/16] drivers: iommu: arm-smmu: split probe functions into DT/generic portions
From: Will Deacon @ 2016-11-18 16:00 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161116152936.22955-13-lorenzo.pieralisi@arm.com>
On Wed, Nov 16, 2016 at 03:29:32PM +0000, Lorenzo Pieralisi wrote:
> Current ARM SMMU probe functions intermingle HW and DT probing
> in the initialization functions to detect and programme the ARM SMMU
> driver features. In order to allow probing the ARM SMMU with other
> firmwares than DT, this patch splits the ARM SMMU init functions into
> DT and HW specific portions so that other FW interfaces (ie ACPI) can
> reuse the HW probing functions and skip the DT portion accordingly.
>
> This patch implements no functional change, only code reshuffling.
>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Reviewed-by: Tomasz Nowicki <tn@semihalf.com>
> Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
> Tested-by: Tomasz Nowicki <tn@semihalf.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Hanjun Guo <hanjun.guo@linaro.org>
> Cc: Robin Murphy <robin.murphy@arm.com>
> ---
> drivers/iommu/arm-smmu.c | 62 +++++++++++++++++++++++++++++-------------------
> 1 file changed, 37 insertions(+), 25 deletions(-)
Reviewed-by: Will Deacon <will.deacon@arm.com>
Although I'd also like Robin to have a look at this.
Will
^ permalink raw reply
* [GIT PULL] pxa-dt for v4.10
From: Robert Jarzmik @ 2016-11-18 16:07 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161118071932.GB1785@localhost>
Olof Johansson <olof@lixom.net> writes:
>> Vijay Kumar (1):
>> Fix no. of gpio cells in the pxa gpio binding doucmentation
>
> This isn't the right patch subject. Please use standard prefix format
> here (ARM: dts: pxa: ...).
>
>
> Please respin this branch and post a fresh pull request. Thanks!
Ah sorry, wasn't careful enough, will respin.
Cheers.
--
Robert
^ permalink raw reply
* [PATCH v8 13/16] drivers: iommu: arm-smmu: add IORT configuration
From: Will Deacon @ 2016-11-18 16:08 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161116152936.22955-14-lorenzo.pieralisi@arm.com>
On Wed, Nov 16, 2016 at 03:29:33PM +0000, Lorenzo Pieralisi wrote:
> In ACPI bases systems, in order to be able to create platform
> devices and initialize them for ARM SMMU components, the IORT
> kernel implementation requires a set of static functions to be
> used by the IORT kernel layer to configure platform devices for
> ARM SMMU components.
>
> Add static configuration functions to the IORT kernel layer for
> the ARM SMMU components, so that the ARM SMMU driver can
> initialize its respective platform device by relying on the IORT
> kernel infrastructure and by adding a corresponding ACPI device
> early probe section entry.
>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Reviewed-by: Tomasz Nowicki <tn@semihalf.com>
> Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
> Tested-by: Tomasz Nowicki <tn@semihalf.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Robin Murphy <robin.murphy@arm.com>
> Cc: Joerg Roedel <joro@8bytes.org>
> ---
> drivers/acpi/arm64/iort.c | 81 +++++++++++++++++++++++++++++++++++++++++++++
> drivers/iommu/arm-smmu.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++-
> include/linux/acpi_iort.h | 3 ++
> 3 files changed, 166 insertions(+), 1 deletion(-)
[...]
> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> index 573b2b6..21d1892 100644
> --- a/drivers/iommu/arm-smmu.c
> +++ b/drivers/iommu/arm-smmu.c
> @@ -28,6 +28,8 @@
>
> #define pr_fmt(fmt) "arm-smmu: " fmt
>
> +#include <linux/acpi.h>
> +#include <linux/acpi_iort.h>
> #include <linux/atomic.h>
> #include <linux/delay.h>
> #include <linux/dma-iommu.h>
> @@ -1904,6 +1906,70 @@ static const struct of_device_id arm_smmu_of_match[] = {
> };
> MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
>
> +#ifdef CONFIG_ACPI
> +static int acpi_smmu_get_data(u32 model, u32 *version, u32 *impl)
You should use the enum type for the version, rather than a u32.
Will
^ permalink raw reply
* [PATCH 3/3] [media] mtk-mdp: mark PM functions as __maybe_unused
From: Arnd Bergmann @ 2016-11-18 16:16 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161118161621.798004-1-arnd@arndb.de>
The driver still produces a warning when CONFIG_PM is disabled, an
earlier fix only partially solved this:
media/platform/mtk-mdp/mtk_mdp_core.c:72:13: error: 'mtk_mdp_clock_off' defined but not used [-Werror=unused-function]
media/platform/mtk-mdp/mtk_mdp_core.c:63:13: error: 'mtk_mdp_clock_on' defined but not used [-Werror=unused-function]
This removes the incorrect #ifdef again and instead marks the PM
functions as __maybe_unused, which reliably shuts up the warning.
Fixes: 1b06fcf56aa6 ("[media] media: mtk-mdp: fix build error")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
index 51f2b50e406f..9e4eb7dcc424 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.c
@@ -234,8 +234,7 @@ static int mtk_mdp_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
-static int mtk_mdp_pm_suspend(struct device *dev)
+static int __maybe_unused mtk_mdp_pm_suspend(struct device *dev)
{
struct mtk_mdp_dev *mdp = dev_get_drvdata(dev);
@@ -244,7 +243,7 @@ static int mtk_mdp_pm_suspend(struct device *dev)
return 0;
}
-static int mtk_mdp_pm_resume(struct device *dev)
+static int __maybe_unused mtk_mdp_pm_resume(struct device *dev)
{
struct mtk_mdp_dev *mdp = dev_get_drvdata(dev);
@@ -252,10 +251,8 @@ static int mtk_mdp_pm_resume(struct device *dev)
return 0;
}
-#endif /* CONFIG_PM */
-#ifdef CONFIG_PM_SLEEP
-static int mtk_mdp_suspend(struct device *dev)
+static int __maybe_unused mtk_mdp_suspend(struct device *dev)
{
if (pm_runtime_suspended(dev))
return 0;
@@ -263,14 +260,13 @@ static int mtk_mdp_suspend(struct device *dev)
return mtk_mdp_pm_suspend(dev);
}
-static int mtk_mdp_resume(struct device *dev)
+static int __maybe_unused mtk_mdp_resume(struct device *dev)
{
if (pm_runtime_suspended(dev))
return 0;
return mtk_mdp_pm_resume(dev);
}
-#endif /* CONFIG_PM_SLEEP */
static const struct dev_pm_ops mtk_mdp_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(mtk_mdp_suspend, mtk_mdp_resume)
--
2.9.0
^ permalink raw reply related
* [GIT PULL 1/10] mailbox: Add Tegra HSP driver
From: Thierry Reding @ 2016-11-18 16:17 UTC (permalink / raw)
To: linux-arm-kernel
Hi ARM SoC maintainers,
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-mailbox
for you to fetch changes up to 68050eb6c611527232fe5574c7306e97e47499ef:
mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() (2016-11-18 14:32:13 +0100)
Thanks,
Thierry
----------------------------------------------------------------
mailbox: Add Tegra HSP driver
This contains the device tree bindings and a driver for the Tegra HSP, a
hardware block that provides hardware synchronization primitives and is
the foundation for inter-processor communication between CPU and BPMP.
----------------------------------------------------------------
Dan Carpenter (1):
mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
Joseph Lo (2):
soc/tegra: Add Tegra186 support
dt-bindings: mailbox: Add Tegra HSP binding
Thierry Reding (2):
Merge branch 'for-4.10/soc' into for-4.10/mailbox
mailbox: Add Tegra HSP driver
.../bindings/mailbox/nvidia,tegra186-hsp.txt | 52 +++
drivers/mailbox/Kconfig | 9 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/tegra-hsp.c | 479 +++++++++++++++++++++
drivers/soc/tegra/Kconfig | 14 +
include/dt-bindings/mailbox/tegra186-hsp.h | 24 ++
6 files changed, 580 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
create mode 100644 drivers/mailbox/tegra-hsp.c
create mode 100644 include/dt-bindings/mailbox/tegra186-hsp.h
^ permalink raw reply
* [GIT PULL 2/10] firmware: Add Tegra IVC and BPMP support
From: Thierry Reding @ 2016-11-18 16:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161118161719.24153-1-thierry.reding@gmail.com>
Hi ARM SoC maintainers,
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-firmware
for you to fetch changes up to b704ed8095ee91af5f3f7343bb3be23aae1cb26d:
dt-bindings: firmware: Allow child nodes inside the Tegra BPMP (2016-11-18 14:33:44 +0100)
Thanks,
Thierry
----------------------------------------------------------------
firmware: Add Tegra IVC and BPMP support
IVC is an inter-processor communication protocol that uses shared memory
to exchange data between processors. The BPMP driver makes use of this
to communicate with the Boot and Power Management Processor (BPMP) and
uses an additional hardware synchronization primitive from the HSP block
to signal availability of new data (doorbell).
Firmware running on the BPMP implements a number of services such as the
control of clocks and resets within the system, or the ability to ungate
or gate power partitions.
----------------------------------------------------------------
Dan Carpenter (1):
mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
Joseph Lo (3):
soc/tegra: Add Tegra186 support
dt-bindings: mailbox: Add Tegra HSP binding
dt-bindings: firmware: Add bindings for Tegra BPMP
Stephen Warren (2):
dt-bindings: Add power domains to Tegra BPMP firmware
dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
Thierry Reding (5):
Merge branch 'for-4.10/soc' into for-4.10/mailbox
mailbox: Add Tegra HSP driver
Merge branch 'for-4.10/mailbox' into for-4.10/firmware
firmware: tegra: Add IVC library
firmware: tegra: Add BPMP support
.../bindings/firmware/nvidia,tegra186-bpmp.txt | 108 ++
.../bindings/mailbox/nvidia,tegra186-hsp.txt | 52 +
drivers/firmware/Kconfig | 1 +
drivers/firmware/Makefile | 1 +
drivers/firmware/tegra/Kconfig | 25 +
drivers/firmware/tegra/Makefile | 2 +
drivers/firmware/tegra/bpmp.c | 868 +++++++++++
drivers/firmware/tegra/ivc.c | 695 +++++++++
drivers/mailbox/Kconfig | 9 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/tegra-hsp.c | 479 ++++++
drivers/soc/tegra/Kconfig | 14 +
include/dt-bindings/clock/tegra186-clock.h | 940 ++++++++++++
include/dt-bindings/mailbox/tegra186-hsp.h | 24 +
include/dt-bindings/power/tegra186-powergate.h | 39 +
include/dt-bindings/reset/tegra186-reset.h | 217 +++
include/soc/tegra/bpmp-abi.h | 1601 ++++++++++++++++++++
include/soc/tegra/bpmp.h | 141 ++
include/soc/tegra/ivc.h | 109 ++
19 files changed, 5327 insertions(+)
create mode 100644 Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
create mode 100644 drivers/firmware/tegra/Kconfig
create mode 100644 drivers/firmware/tegra/Makefile
create mode 100644 drivers/firmware/tegra/bpmp.c
create mode 100644 drivers/firmware/tegra/ivc.c
create mode 100644 drivers/mailbox/tegra-hsp.c
create mode 100644 include/dt-bindings/clock/tegra186-clock.h
create mode 100644 include/dt-bindings/mailbox/tegra186-hsp.h
create mode 100644 include/dt-bindings/power/tegra186-powergate.h
create mode 100644 include/dt-bindings/reset/tegra186-reset.h
create mode 100644 include/soc/tegra/bpmp-abi.h
create mode 100644 include/soc/tegra/bpmp.h
create mode 100644 include/soc/tegra/ivc.h
^ permalink raw reply
* [GIT PULL 3/10] reset: Add Tegra BPMP reset driver
From: Thierry Reding @ 2016-11-18 16:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161118161719.24153-1-thierry.reding@gmail.com>
Hi ARM SoC maintainers,
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-reset
for you to fetch changes up to dc606c5205536a828c17bd96f06559dafaf75fb7:
reset: Add Tegra BPMP reset driver (2016-11-18 14:34:56 +0100)
Thanks,
Thierry
----------------------------------------------------------------
reset: Add Tegra BPMP reset driver
This contains a patch which implements a reset driver using the services
provided by the BPMP firmware (via the MRQ_RESET request).
----------------------------------------------------------------
Dan Carpenter (1):
mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
Joseph Lo (3):
soc/tegra: Add Tegra186 support
dt-bindings: mailbox: Add Tegra HSP binding
dt-bindings: firmware: Add bindings for Tegra BPMP
Stephen Warren (2):
dt-bindings: Add power domains to Tegra BPMP firmware
dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
Thierry Reding (7):
Merge branch 'for-4.10/soc' into for-4.10/mailbox
mailbox: Add Tegra HSP driver
Merge branch 'for-4.10/mailbox' into for-4.10/firmware
firmware: tegra: Add IVC library
firmware: tegra: Add BPMP support
Merge branch 'for-4.10/firmware' into for-4.10/reset
reset: Add Tegra BPMP reset driver
.../bindings/firmware/nvidia,tegra186-bpmp.txt | 108 ++
.../bindings/mailbox/nvidia,tegra186-hsp.txt | 52 +
drivers/firmware/Kconfig | 1 +
drivers/firmware/Makefile | 1 +
drivers/firmware/tegra/Kconfig | 25 +
drivers/firmware/tegra/Makefile | 2 +
drivers/firmware/tegra/bpmp.c | 868 +++++++++++
drivers/firmware/tegra/ivc.c | 695 +++++++++
drivers/mailbox/Kconfig | 9 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/tegra-hsp.c | 479 ++++++
drivers/reset/Kconfig | 1 +
drivers/reset/Makefile | 1 +
drivers/reset/tegra/Kconfig | 2 +
drivers/reset/tegra/Makefile | 1 +
drivers/reset/tegra/reset-bpmp.c | 71 +
drivers/soc/tegra/Kconfig | 14 +
include/dt-bindings/clock/tegra186-clock.h | 940 ++++++++++++
include/dt-bindings/mailbox/tegra186-hsp.h | 24 +
include/dt-bindings/power/tegra186-powergate.h | 39 +
include/dt-bindings/reset/tegra186-reset.h | 217 +++
include/soc/tegra/bpmp-abi.h | 1601 ++++++++++++++++++++
include/soc/tegra/bpmp.h | 141 ++
include/soc/tegra/ivc.h | 109 ++
24 files changed, 5403 insertions(+)
create mode 100644 Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
create mode 100644 drivers/firmware/tegra/Kconfig
create mode 100644 drivers/firmware/tegra/Makefile
create mode 100644 drivers/firmware/tegra/bpmp.c
create mode 100644 drivers/firmware/tegra/ivc.c
create mode 100644 drivers/mailbox/tegra-hsp.c
create mode 100644 drivers/reset/tegra/Kconfig
create mode 100644 drivers/reset/tegra/Makefile
create mode 100644 drivers/reset/tegra/reset-bpmp.c
create mode 100644 include/dt-bindings/clock/tegra186-clock.h
create mode 100644 include/dt-bindings/mailbox/tegra186-hsp.h
create mode 100644 include/dt-bindings/power/tegra186-powergate.h
create mode 100644 include/dt-bindings/reset/tegra186-reset.h
create mode 100644 include/soc/tegra/bpmp-abi.h
create mode 100644 include/soc/tegra/bpmp.h
create mode 100644 include/soc/tegra/ivc.h
^ permalink raw reply
* [GIT PULL 4/10] bus: Add Tegra GMI support
From: Thierry Reding @ 2016-11-18 16:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161118161719.24153-1-thierry.reding@gmail.com>
Hi ARM SoC maintainers,
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-bus
for you to fetch changes up to 40eb47767852a9122ef99a48f8d208ec6327e07f:
bus: Add support for Tegra Generic Memory Interface (2016-11-15 17:27:53 +0100)
Thanks,
Thierry
----------------------------------------------------------------
bus: Add Tegra GMI support
This provides a driver to enable the use of the Generic Memory Interface
found on Tegra SoCs that can host various types of high-speed devices.
----------------------------------------------------------------
Mirza Krak (2):
dt/bindings: Add bindings for Tegra GMI controller
bus: Add support for Tegra Generic Memory Interface
.../devicetree/bindings/bus/nvidia,tegra20-gmi.txt | 132 ++++++++++
drivers/bus/Kconfig | 7 +
drivers/bus/Makefile | 1 +
drivers/bus/tegra-gmi.c | 284 +++++++++++++++++++++
4 files changed, 424 insertions(+)
create mode 100644 Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
create mode 100644 drivers/bus/tegra-gmi.c
^ permalink raw reply
* [GIT PULL 5/10] soc: tegra: Core SoC changes for v4.10-rc1
From: Thierry Reding @ 2016-11-18 16:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161118161719.24153-1-thierry.reding@gmail.com>
Hi ARM SoC maintainers,
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-soc
for you to fetch changes up to 4522112069a976908e32e5dd3231c9272d19794a:
soc/tegra: pmc: Use consistent naming for PM domains (2016-11-15 15:51:56 +0100)
Thanks,
Thierry
----------------------------------------------------------------
soc: tegra: Core SoC changes for v4.10-rc1
This contains mostly cleanup and new feature work on the power
management controller as well as the addition of a Kconfig symbol for
the new Tegra186 (Parker) SoC generation.
----------------------------------------------------------------
Jon Hunter (4):
soc/tegra: pmc: Guard against uninitialised PMC clock
soc/tegra: pmc: Simplify IO rail bit handling
soc/tegra: pmc: Check return code for pm_genpd_init()
soc/tegra: pmc: Remove genpd when adding provider fails
Joseph Lo (1):
soc/tegra: Add Tegra186 support
Laxman Dewangan (3):
soc/tegra: pmc: Use BIT macro for register field definition
soc/tegra: pmc: Correct type of variable for tegra_pmc_readl()
soc/tegra: pmc: Add I/O pad voltage support
Thierry Reding (3):
soc/tegra: pmc: Use consistent ordering of bit definitions
soc/tegra: pmc: Clean-up I/O rail error messages
soc/tegra: pmc: Use consistent naming for PM domains
drivers/soc/tegra/Kconfig | 14 ++
drivers/soc/tegra/pmc.c | 398 +++++++++++++++++++++++++++++++++++-----------
include/soc/tegra/pmc.h | 126 +++++++++++----
3 files changed, 414 insertions(+), 124 deletions(-)
^ permalink raw reply
* [GIT PULL 6/10] dt-bindings: Cleanups and additions for v4.10-rc1
From: Thierry Reding @ 2016-11-18 16:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161118161719.24153-1-thierry.reding@gmail.com>
Hi ARM SoC maintainers,
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-dt-bindings
for you to fetch changes up to 2e002bdedcdcbd6a708f5698a09eb32df568efb8:
dt-bindings: Add documentation for Tegra186 Denver (2016-11-17 18:09:05 +0100)
Thanks,
Thierry
----------------------------------------------------------------
dt-bindings: Cleanups and additions for v4.10-rc1
Contains two small patches, one fixing a typo and the other adding the
compatible string for the Denver CPUs found on the new Tegra186 SoCs.
----------------------------------------------------------------
Mirza Krak (1):
serial: tegra20-hsuart: Fix typo in dmas DT binding description
Thierry Reding (1):
dt-bindings: Add documentation for Tegra186 Denver
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
^ permalink raw reply
* [GIT PULL 7/10] ARM: tegra: Device tree changes for v4.10-rc1
From: Thierry Reding @ 2016-11-18 16:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161118161719.24153-1-thierry.reding@gmail.com>
Hi ARM SoC maintainers,
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm-dt
for you to fetch changes up to 5e8a724d143308f3195375951b0c8f01b2ca59fe:
ARM: tegra: apalis-tk1: Drop leading 0 from unit-address (2016-11-08 11:14:02 +0100)
Thanks,
Thierry
----------------------------------------------------------------
ARM: tegra: Device tree changes for v4.10-rc1
Adds support for GMI on Tegra20 and Tegra30 and enables the GPU on Nyan
Chromebooks. It also enables sound support on various Toradex devices.
----------------------------------------------------------------
Marcel Ziswiler (1):
ARM: tegra: apalis/colibri t30: Integrate audio
Mirza Krak (2):
ARM: tegra: Add Tegra20 GMI support
ARM: tegra: Add Tegra30 GMI support
Paul Kocialkowski (1):
ARM: tegra: nyan: Enable GPU node and related supply
Thierry Reding (1):
ARM: tegra: apalis-tk1: Drop leading 0 from unit-address
arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +-
arch/arm/boot/dts/tegra124-nyan.dtsi | 8 +++++-
arch/arm/boot/dts/tegra20.dtsi | 13 +++++++++
arch/arm/boot/dts/tegra30-apalis.dtsi | 49 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/tegra30-colibri.dtsi | 49 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/tegra30.dtsi | 13 +++++++++
6 files changed, 132 insertions(+), 2 deletions(-)
^ permalink raw reply
* [GIT PULL 8/10] ARM: tegra: Default configuration updates for v4.10-rc1
From: Thierry Reding @ 2016-11-18 16:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161118161719.24153-1-thierry.reding@gmail.com>
Hi ARM SoC maintainers,
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm-defconfig
for you to fetch changes up to dafba3f6fb8614a114f939e5626447d71db864af:
ARM: tegra: Enable GMI driver in default configuration (2016-11-08 11:49:41 +0100)
Thanks,
Thierry
----------------------------------------------------------------
ARM: tegra: Default configuration updates for v4.10-rc1
Enable audio support for various Toradex devices as well as the GMI.
----------------------------------------------------------------
Marcel Ziswiler (1):
ARM: tegra: Enable SGTL5000 audio
Thierry Reding (2):
ARM: tegra: Update default configuration for v4.9-rc1
ARM: tegra: Enable GMI driver in default configuration
arch/arm/configs/tegra_defconfig | 27 +++++++++++++--------------
1 file changed, 13 insertions(+), 14 deletions(-)
^ permalink raw reply
* [GIT PULL 9/10] arm64: tegra: Device tree changes for v4.10-rc1
From: Thierry Reding @ 2016-11-18 16:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161118161719.24153-1-thierry.reding@gmail.com>
Hi ARM SoC maintainers,
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-dt
for you to fetch changes up to cc13b4fa4ac780cec6c21b64a39ab2950e95e8f6:
arm64: tegra: Add NVIDIA P2771 board support (2016-11-18 14:35:53 +0100)
Thanks,
Thierry
----------------------------------------------------------------
arm64: tegra: Device tree changes for v4.10-rc1
This adds initial support for Tegra186, the P3310 processor module as
well as the P2771 development board. Not much is functional, but there
is enough to boot to an initial ramdisk with debug serial output.
----------------------------------------------------------------
Dan Carpenter (1):
mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
Joseph Lo (6):
soc/tegra: Add Tegra186 support
dt-bindings: mailbox: Add Tegra HSP binding
dt-bindings: firmware: Add bindings for Tegra BPMP
arm64: tegra: Add Tegra186 support
arm64: tegra: Add NVIDIA P3310 processor module support
arm64: tegra: Add NVIDIA P2771 board support
Stephen Warren (2):
dt-bindings: Add power domains to Tegra BPMP firmware
dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
Thierry Reding (12):
Merge branch 'for-4.10/soc' into for-4.10/mailbox
mailbox: Add Tegra HSP driver
Merge branch 'for-4.10/mailbox' into for-4.10/firmware
firmware: tegra: Add IVC library
firmware: tegra: Add BPMP support
Merge branch 'for-4.10/firmware' into for-4.10/arm64/dt
arm64: tegra: Add CPU nodes for Tegra186
arm64: tegra: Add serial ports on Tegra186
arm64: tegra: Add I2C controllers on Tegra186
arm64: tegra: Add SDHCI controllers on Tegra186
arm64: tegra: Add GPIO controllers on Tegra186
arm64: tegra: Enable PSCI on P3310
.../bindings/firmware/nvidia,tegra186-bpmp.txt | 108 ++
.../bindings/mailbox/nvidia,tegra186-hsp.txt | 52 +
arch/arm64/boot/dts/nvidia/Makefile | 1 +
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 8 +
arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 64 +
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 402 +++++
drivers/firmware/Kconfig | 1 +
drivers/firmware/Makefile | 1 +
drivers/firmware/tegra/Kconfig | 25 +
drivers/firmware/tegra/Makefile | 2 +
drivers/firmware/tegra/bpmp.c | 868 +++++++++++
drivers/firmware/tegra/ivc.c | 695 +++++++++
drivers/mailbox/Kconfig | 9 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/tegra-hsp.c | 479 ++++++
drivers/soc/tegra/Kconfig | 14 +
include/dt-bindings/clock/tegra186-clock.h | 940 ++++++++++++
include/dt-bindings/mailbox/tegra186-hsp.h | 24 +
include/dt-bindings/power/tegra186-powergate.h | 39 +
include/dt-bindings/reset/tegra186-reset.h | 217 +++
include/soc/tegra/bpmp-abi.h | 1601 ++++++++++++++++++++
include/soc/tegra/bpmp.h | 141 ++
include/soc/tegra/ivc.h | 109 ++
23 files changed, 5802 insertions(+)
create mode 100644 Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
create mode 100644 arch/arm64/boot/dts/nvidia/tegra186.dtsi
create mode 100644 drivers/firmware/tegra/Kconfig
create mode 100644 drivers/firmware/tegra/Makefile
create mode 100644 drivers/firmware/tegra/bpmp.c
create mode 100644 drivers/firmware/tegra/ivc.c
create mode 100644 drivers/mailbox/tegra-hsp.c
create mode 100644 include/dt-bindings/clock/tegra186-clock.h
create mode 100644 include/dt-bindings/mailbox/tegra186-hsp.h
create mode 100644 include/dt-bindings/power/tegra186-powergate.h
create mode 100644 include/dt-bindings/reset/tegra186-reset.h
create mode 100644 include/soc/tegra/bpmp-abi.h
create mode 100644 include/soc/tegra/bpmp.h
create mode 100644 include/soc/tegra/ivc.h
^ permalink raw reply
* [GIT PULL 10/10] arm64: tegra: Default configuration updates for v4.10-rc1
From: Thierry Reding @ 2016-11-18 16:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161118161719.24153-1-thierry.reding@gmail.com>
Hi ARM SoC maintainers,
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-4.10-arm64-defconfig
for you to fetch changes up to c6299451bb45bf3370cc3aa53891fb9d48bed774:
arm64: defconfig: Enable Tegra186 SoC (2016-11-15 16:26:03 +0100)
Thanks,
Thierry
----------------------------------------------------------------
arm64: tegra: Default configuration updates for v4.10-rc1
Enable Tegra186 support.
----------------------------------------------------------------
Joseph Lo (1):
arm64: defconfig: Enable Tegra186 SoC
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox