* [RFC PATCH 17/23] arm: update spitz_defconfig
From: Bartlomiej Zolnierkiewicz @ 2016-12-06 12:38 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1481027938-31831-1-git-send-email-b.zolnierkie@samsung.com>
Update spitz_defconfig against kernel v4.9-rc6.
The changes were obtained by doing:
$ make spitz_defconfig
$ make savedefconfig
$ diff -u arch/arm/spitz_defconfig defconfig
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
arch/arm/configs/spitz_defconfig | 61 ++++++++--------------------------------
1 file changed, 12 insertions(+), 49 deletions(-)
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index a1ede19..1388cde 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -1,9 +1,6 @@
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
@@ -11,6 +8,7 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_PXA=y
CONFIG_PXA_SHARPSL=y
CONFIG_MACH_AKITA=y
@@ -22,34 +20,26 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug"
CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
-CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
@@ -66,8 +56,6 @@ CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_PXA_FICP=m
CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
@@ -75,7 +63,6 @@ CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
@@ -87,9 +74,7 @@ CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_ROM=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
@@ -104,20 +89,17 @@ CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_ASYNC=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_BSDCOMP=m
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
@@ -128,12 +110,11 @@ CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=m
# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SPI=y
CONFIG_SPI_PXA2XX=y
CONFIG_FB=y
CONFIG_FB_PXA=y
@@ -141,14 +122,8 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_CORGI=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
@@ -163,8 +138,9 @@ CONFIG_HID_MONTEREY=m
CONFIG_HID_PANTHERLORD=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
CONFIG_USB=m
CONFIG_USB_MON=m
CONFIG_USB_OHCI_HCD=m
@@ -205,11 +181,9 @@ CONFIG_USB_EMI26=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
@@ -222,8 +196,6 @@ CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
@@ -233,32 +205,21 @@ CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_RUBIN=y
CONFIG_CRAMFS=m
CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_PARTITION_ADVANCED=y
+CONFIG_NFS_V4=m
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
-CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
@@ -268,6 +229,8 @@ CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=y
CONFIG_LIBCRC32C=m
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
--
1.9.1
^ permalink raw reply related
* [RFC PATCH 18/23] arm: use kconfig fragments for ARCH_PXA defconfigs (part 2)
From: Bartlomiej Zolnierkiewicz @ 2016-12-06 12:38 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1481027938-31831-1-git-send-email-b.zolnierkie@samsung.com>
Replace [corgi,spitz]_defconfig-s with
a Makefile target using merge_config.
The patch was verified with doing:
$ make [corgi,...]_defconfig
$ make savedefconfig
and comparing resulting defconfig files (before/after the patch).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
arch/arm/Makefile | 8 +
arch/arm/configs/corgi.config | 11 +
.../{corgi_defconfig => pxa_basic2_defconfig} | 11 -
arch/arm/configs/spitz.config | 10 +
arch/arm/configs/spitz_defconfig | 236 ---------------------
5 files changed, 29 insertions(+), 247 deletions(-)
create mode 100644 arch/arm/configs/corgi.config
rename arch/arm/configs/{corgi_defconfig => pxa_basic2_defconfig} (96%)
create mode 100644 arch/arm/configs/spitz.config
delete mode 100644 arch/arm/configs/spitz_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 58890a9..d3ba1b7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -422,6 +422,14 @@ PHONY += pxa255-idp_defconfig
pxa255-idp_defconfig:
$(call merge_into_defconfig,pxa_basic1_defconfig,pxa255-idp)
+PHONY += corgi_defconfig
+corgi_defconfig:
+ $(call merge_into_defconfig,pxa_basic2_defconfig,corgi)
+
+PHONY += spitz_defconfig
+spitz_defconfig:
+ $(call merge_into_defconfig,pxa_basic2_defconfig,spitz)
+
PHONY += vdso_install
vdso_install:
ifeq ($(CONFIG_VDSO),y)
diff --git a/arch/arm/configs/corgi.config b/arch/arm/configs/corgi.config
new file mode 100644
index 0000000..c443e20
--- /dev/null
+++ b/arch/arm/configs/corgi.config
@@ -0,0 +1,11 @@
+CONFIG_MACH_POODLE=y
+CONFIG_MACH_CORGI=y
+CONFIG_MACH_SHEPHERD=y
+CONFIG_MACH_HUSKY=y
+CONFIG_XFRM_USER=m
+CONFIG_I2C=y
+CONFIG_I2C_PXA=y
+CONFIG_FB_W100=y
+CONFIG_SOUND=y
+CONFIG_SOUND_PRIME=y
+CONFIG_USB_GADGET=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/pxa_basic2_defconfig
similarity index 96%
rename from arch/arm/configs/corgi_defconfig
rename to arch/arm/configs/pxa_basic2_defconfig
index 511f6f3..d883ec2 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/pxa_basic2_defconfig
@@ -11,10 +11,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_PXA=y
CONFIG_PXA_SHARPSL=y
-CONFIG_MACH_POODLE=y
-CONFIG_MACH_CORGI=y
-CONFIG_MACH_SHEPHERD=y
-CONFIG_MACH_HUSKY=y
CONFIG_PCCARD=y
CONFIG_PCMCIA_PXA2XX=y
CONFIG_PREEMPT=y
@@ -26,7 +22,6 @@ CONFIG_BINFMT_MISC=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
CONFIG_INET=y
CONFIG_SYN_COOKIES=y
CONFIG_INET6_AH=m
@@ -118,18 +113,13 @@ CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_PXA=y
CONFIG_SPI_PXA2XX=y
CONFIG_FB=y
-CONFIG_FB_W100=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_CORGI=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
@@ -188,7 +178,6 @@ CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
-CONFIG_USB_GADGET=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
diff --git a/arch/arm/configs/spitz.config b/arch/arm/configs/spitz.config
new file mode 100644
index 0000000..fe163e8
--- /dev/null
+++ b/arch/arm/configs/spitz.config
@@ -0,0 +1,10 @@
+CONFIG_MACH_AKITA=y
+CONFIG_MACH_BORZOI=y
+CONFIG_FB_PXA=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_GADGET=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
deleted file mode 100644
index 1388cde..0000000
--- a/arch/arm/configs/spitz_defconfig
+++ /dev/null
@@ -1,236 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ARCH_PXA=y
-CONFIG_PXA_SHARPSL=y
-CONFIG_MACH_AKITA=y
-CONFIG_MACH_BORZOI=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_PXA_FICP=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_SHARPSL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_CORGI=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB=m
-CONFIG_USB_MON=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V4=m
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=m
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
--
1.9.1
^ permalink raw reply related
* [RFC PATCH 19/23] arm: update ezx_defconfig
From: Bartlomiej Zolnierkiewicz @ 2016-12-06 12:38 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1481027938-31831-1-git-send-email-b.zolnierkie@samsung.com>
Update ezx_defconfig against kernel v4.9-rc6.
The changes were obtained by doing:
$ make ezx_defconfig
$ make savedefconfig
$ diff -u arch/arm/ezx_defconfig defconfig
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
arch/arm/configs/ezx_defconfig | 92 +++++-------------------------------------
1 file changed, 10 insertions(+), 82 deletions(-)
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index ea316c4..76746a0 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -1,12 +1,10 @@
-CONFIG_EXPERIMENTAL=y
CONFIG_LOCALVERSION="-ezx200910312315"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
CONFIG_EXPERT=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
@@ -19,8 +17,6 @@ CONFIG_MODVERSIONS=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_PXA=y
CONFIG_PXA_EZX=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -28,16 +24,12 @@ CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
CONFIG_KEXEC=y
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
CONFIG_APM_EMULATION=y
CONFIG_NET=y
CONFIG_PACKET=y
@@ -51,7 +43,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
@@ -61,7 +52,6 @@ CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_SCTP=m
@@ -109,21 +99,12 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -133,7 +114,6 @@ CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -144,15 +124,12 @@ CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_BRIDGE=m
CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
@@ -162,7 +139,6 @@ CONFIG_BT_HIDP=y
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
@@ -174,7 +150,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_FW_LOADER=m
CONFIG_CONNECTOR=m
CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -189,19 +164,16 @@ CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
+# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
@@ -214,9 +186,9 @@ CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCAP=y
# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=8
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=8
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
@@ -232,31 +204,6 @@ CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_PCAP=y
CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_MEDIA_TUNER_CUSTOMISE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_MT9M111=y
-CONFIG_VIDEO_PXA27x=y
-# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_TEA5764=y
CONFIG_FB=y
CONFIG_FB_PXA=y
CONFIG_FB_PXA_OVERLAY=y
@@ -264,11 +211,7 @@ CONFIG_FB_PXA_PARAMETERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_MIXER_OSS=y
@@ -279,17 +222,15 @@ CONFIG_SND_PCM_OSS=y
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_PXA2XX_SOC=y
-# CONFIG_USB_HID is not set
CONFIG_HID_APPLE=m
+# CONFIG_USB_HID is not set
CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_SDIO_UART=m
CONFIG_MMC_PXA=y
CONFIG_MMC_SPI=y
@@ -310,9 +251,6 @@ CONFIG_REISERFS_FS=m
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_XFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
@@ -330,12 +268,10 @@ CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_ROMFS_FS=m
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
-CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_WEAK_PW_HASH=y
@@ -381,31 +317,22 @@ CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_PROVE_LOCKING=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
@@ -415,4 +342,5 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
--
1.9.1
^ permalink raw reply related
* [RFC PATCH 20/23] arm: imote2_defconfig
From: Bartlomiej Zolnierkiewicz @ 2016-12-06 12:38 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1481027938-31831-1-git-send-email-b.zolnierkie@samsung.com>
Update imote2_defconfig against kernel v4.9-rc6.
The changes were obtained by doing:
$ make imote2_defconfig
$ make savedefconfig
$ diff -u arch/arm/imote2_defconfig defconfig
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
arch/arm/configs/imote2_defconfig | 84 +++++----------------------------------
1 file changed, 9 insertions(+), 75 deletions(-)
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
index 18e59fe..a87bf0b 100644
--- a/arch/arm/configs/imote2_defconfig
+++ b/arch/arm/configs/imote2_defconfig
@@ -1,11 +1,9 @@
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
CONFIG_EXPERT=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
@@ -18,18 +16,13 @@ CONFIG_MODVERSIONS=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_PXA=y
CONFIG_MACH_INTELMOTE2=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
CONFIG_APM_EMULATION=y
CONFIG_NET=y
CONFIG_PACKET=y
@@ -43,7 +36,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
@@ -53,7 +45,6 @@ CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_SCTP=m
@@ -101,21 +92,12 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -125,7 +107,6 @@ CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -136,7 +117,6 @@ CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
@@ -154,7 +134,6 @@ CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_AR7_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -169,19 +148,16 @@ CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
+# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
@@ -192,9 +168,9 @@ CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=8
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=8
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
@@ -210,31 +186,6 @@ CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_DA903X=y
CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_MEDIA_TUNER_CUSTOMISE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_MT9M111=y
-CONFIG_VIDEO_PXA27x=y
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
CONFIG_FB=y
CONFIG_FB_PXA=y
CONFIG_FB_PXA_OVERLAY=y
@@ -242,10 +193,7 @@ CONFIG_FB_PXA_PARAMETERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_MIXER_OSS=y
@@ -258,14 +206,12 @@ CONFIG_SND_SOC=y
CONFIG_SND_PXA2XX_SOC=y
# CONFIG_USB_HID is not set
CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_SDIO_UART=m
CONFIG_MMC_PXA=y
CONFIG_MMC_SPI=y
@@ -282,8 +228,6 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PXA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=m
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
@@ -301,12 +245,10 @@ CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_ROMFS_FS=m
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
-CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_WEAK_PW_HASH=y
@@ -352,31 +294,22 @@ CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_PROVE_LOCKING=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
@@ -386,5 +319,6 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC16=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
--
1.9.1
^ permalink raw reply related
* [RFC PATCH 21/23] arm: use kconfig fragments for ARCH_PXA defconfigs (part 3)
From: Bartlomiej Zolnierkiewicz @ 2016-12-06 12:38 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1481027938-31831-1-git-send-email-b.zolnierkie@samsung.com>
Replace [ezx,imote2]_defconfig-s with
a Makefile target using merge_config.
The patch was verified with doing:
$ make [ezx,...]_defconfig
$ make savedefconfig
and comparing resulting defconfig files (before/after the patch).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
arch/arm/Makefile | 8 +
arch/arm/configs/ezx.config | 39 +++
arch/arm/configs/ezx_defconfig | 346 ---------------------
arch/arm/configs/imote2.config | 17 +
.../{imote2_defconfig => pxa_basic3_defconfig} | 17 -
5 files changed, 64 insertions(+), 363 deletions(-)
create mode 100644 arch/arm/configs/ezx.config
delete mode 100644 arch/arm/configs/ezx_defconfig
create mode 100644 arch/arm/configs/imote2.config
rename arch/arm/configs/{imote2_defconfig => pxa_basic3_defconfig} (94%)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index d3ba1b7..6613568 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -430,6 +430,14 @@ PHONY += spitz_defconfig
spitz_defconfig:
$(call merge_into_defconfig,pxa_basic2_defconfig,spitz)
+PHONY += ezx_defconfig
+ezx_defconfig:
+ $(call merge_into_defconfig,pxa_basic3_defconfig,ezx)
+
+PHONY += imote2_defconfig
+imote2_defconfig:
+ $(call merge_into_defconfig,pxa_basic3_defconfig,imote2)
+
PHONY += vdso_install
vdso_install:
ifeq ($(CONFIG_VDSO),y)
diff --git a/arch/arm/configs/ezx.config b/arch/arm/configs/ezx.config
new file mode 100644
index 0000000..b33a0db
--- /dev/null
+++ b/arch/arm/configs/ezx.config
@@ -0,0 +1,39 @@
+CONFIG_LOCALVERSION="-ezx200910312315"
+CONFIG_PXA_EZX=y
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_IDLE=y
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_PCAP=y
+CONFIG_EZX_PCAP=y
+CONFIG_REGULATOR_PCAP=y
+CONFIG_HID_APPLE=m
+CONFIG_RTC_DRV_PCAP=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_JFFS2_FS=m
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
deleted file mode 100644
index 76746a0..0000000
--- a/arch/arm/configs/ezx_defconfig
+++ /dev/null
@@ -1,346 +0,0 @@
-CONFIG_LOCALVERSION="-ezx200910312315"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_PXA=y
-CONFIG_PXA_EZX=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_IDLE=y
-CONFIG_BINFMT_MISC=m
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE=m
-CONFIG_BT=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_CONNECTOR=m
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_PCAP=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_INPUT_PCAP=y
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=8
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_EZX_PCAP=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-CONFIG_REGULATOR_PCAP=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_OVERLAY=y
-CONFIG_FB_PXA_PARAMETERS=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_PXA2XX_SOC=y
-CONFIG_HID_APPLE=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_PXA=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_LP3944=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_LOCKING=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
diff --git a/arch/arm/configs/imote2.config b/arch/arm/configs/imote2.config
new file mode 100644
index 0000000..8956eec
--- /dev/null
+++ b/arch/arm/configs/imote2.config
@@ -0,0 +1,17 @@
+CONFIG_MACH_INTELMOTE2=y
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+CONFIG_IEEE802154=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_AR7_PARTS=y
+CONFIG_PMIC_DA903X=y
+CONFIG_REGULATOR_DA903X=y
+CONFIG_RTC_DRV_PXA=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_CRC16=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/pxa_basic3_defconfig
similarity index 94%
rename from arch/arm/configs/imote2_defconfig
rename to arch/arm/configs/pxa_basic3_defconfig
index a87bf0b..ca09e47 100644
--- a/arch/arm/configs/imote2_defconfig
+++ b/arch/arm/configs/pxa_basic3_defconfig
@@ -15,12 +15,10 @@ CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_PXA=y
-CONFIG_MACH_INTELMOTE2=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
CONFIG_KEXEC=y
CONFIG_BINFMT_MISC=m
CONFIG_APM_EMULATION=y
@@ -122,18 +120,11 @@ CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_BRIDGE=m
-# CONFIG_BRIDGE_IGMP_SNOOPING is not set
-CONFIG_IEEE802154=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
CONFIG_FW_LOADER=m
CONFIG_CONNECTOR=m
CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -180,11 +171,9 @@ CONFIG_SPI_PXA2XX=y
CONFIG_GPIO_SYSFS=y
CONFIG_POWER_SUPPLY=y
# CONFIG_HWMON is not set
-CONFIG_PMIC_DA903X=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-CONFIG_REGULATOR_DA903X=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_FB=y
CONFIG_FB_PXA=y
@@ -225,7 +214,6 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PXA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=m
CONFIG_AUTOFS4_FS=y
@@ -234,10 +222,6 @@ CONFIG_CUSE=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RUBIN=y
@@ -319,6 +303,5 @@ CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC16=y
CONFIG_FONTS=y
CONFIG_FONT_MINI_4x6=y
--
1.9.1
^ permalink raw reply related
* [RFC PATCH 22/23] arm: use kconfig fragments for exynos_defconfig/multi_v7_defconfig
From: Bartlomiej Zolnierkiewicz @ 2016-12-06 12:38 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1481027938-31831-1-git-send-email-b.zolnierkie@samsung.com>
Replace [exynos,multi_v7]_defconfig-s with
a Makefile target using merge_config.
The patch was verified with doing:
$ make [exynos,multi_v7]_defconfig
$ make savedefconfig
and comparing resulting defconfig files (before/after the patch).
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: linux-samsung-soc at vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
arch/arm/Makefile | 8 +
arch/arm/configs/dummy_defconfig | 1 +
arch/arm/configs/exynos/hw_m.config | 2 +
arch/arm/configs/exynos/hw_m_shared.config | 18 ++
arch/arm/configs/exynos/hw_y.config | 93 +++++++
arch/arm/configs/exynos/hw_y_shared.config | 93 +++++++
arch/arm/configs/exynos/sys_y.config | 33 +++
arch/arm/configs/exynos/sys_y_shared.config | 37 +++
arch/arm/configs/exynos_defconfig | 274 ---------------------
...{multi_v7_defconfig => multi_v7_base_defconfig} | 147 -----------
10 files changed, 285 insertions(+), 421 deletions(-)
create mode 100644 arch/arm/configs/dummy_defconfig
create mode 100644 arch/arm/configs/exynos/hw_m.config
create mode 100644 arch/arm/configs/exynos/hw_m_shared.config
create mode 100644 arch/arm/configs/exynos/hw_y.config
create mode 100644 arch/arm/configs/exynos/hw_y_shared.config
create mode 100644 arch/arm/configs/exynos/sys_y.config
create mode 100644 arch/arm/configs/exynos/sys_y_shared.config
delete mode 100644 arch/arm/configs/exynos_defconfig
rename arch/arm/configs/{multi_v7_defconfig => multi_v7_base_defconfig} (84%)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 6613568..12a8da9 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -438,6 +438,14 @@ PHONY += imote2_defconfig
imote2_defconfig:
$(call merge_into_defconfig,pxa_basic3_defconfig,imote2)
+PHONY += exynos_defconfig
+exynos_defconfig:
+ $(call merge_into_defconfig,dummy_defconfig,exynos/hw_y exynos/hw_y_shared exynos/hw_m exynos/hw_m_shared exynos/sys_y exynos/sys_y_shared)
+
+PHONY += multi_v7_defconfig
+multi_v7_defconfig:
+ $(call merge_into_defconfig,multi_v7_base_defconfig,exynos/hw_y_shared exynos/hw_m_shared exynos/sys_y_shared)
+
PHONY += vdso_install
vdso_install:
ifeq ($(CONFIG_VDSO),y)
diff --git a/arch/arm/configs/dummy_defconfig b/arch/arm/configs/dummy_defconfig
new file mode 100644
index 0000000..8b13789
--- /dev/null
+++ b/arch/arm/configs/dummy_defconfig
@@ -0,0 +1 @@
+
diff --git a/arch/arm/configs/exynos/hw_m.config b/arch/arm/configs/exynos/hw_m.config
new file mode 100644
index 0000000..6986074
--- /dev/null
+++ b/arch/arm/configs/exynos/hw_m.config
@@ -0,0 +1,2 @@
+CONFIG_DM_CRYPT=m
+CONFIG_USB_VIDEO_CLASS=m
diff --git a/arch/arm/configs/exynos/hw_m_shared.config b/arch/arm/configs/exynos/hw_m_shared.config
new file mode 100644
index 0000000..b62a72e
--- /dev/null
+++ b/arch/arm/configs/exynos/hw_m_shared.config
@@ -0,0 +1,18 @@
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
+CONFIG_VIDEO_S5P_FIMC=m
+CONFIG_VIDEO_S5P_MIPI_CSIS=m
+CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
+CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
+CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
+CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
+CONFIG_CRYPTO_SHA1_ARM_NEON=m
+CONFIG_CRYPTO_SHA256_ARM=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
+CONFIG_VIDEO_VIVID=m
diff --git a/arch/arm/configs/exynos/hw_y.config b/arch/arm/configs/exynos/hw_y.config
new file mode 100644
index 0000000..a41f388
--- /dev/null
+++ b/arch/arm/configs/exynos/hw_y.config
@@ -0,0 +1,93 @@
+CONFIG_ARCH_EXYNOS3=y
+CONFIG_BIG_LITTLE=y
+CONFIG_NR_CPUS=8
+CONFIG_HIGHMEM=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_ARM_EXYNOS_CPUIDLE=y
+CONFIG_VFP=y
+CONFIG_CFG80211=y
+CONFIG_RFKILL_REGULATOR=y
+CONFIG_SCSI=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_USB_RTL8152=y
+CONFIG_KEYBOARD_CROS_EC=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_CYAPA=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_MMS114=y
+CONFIG_INPUT_MAX77693_HAPTIC=y
+CONFIG_INPUT_MAX8997_HAPTIC=y
+CONFIG_KEYBOARD_SAMSUNG=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS_I2C_INFINEON=y
+CONFIG_I2C_ARB_GPIO_CHALLENGE=y
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_CROS_EC_TUNNEL=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_S3C64XX=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_WM8994=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_BATTERY_MAX17040=y
+CONFIG_BATTERY_MAX17042=y
+CONFIG_CHARGER_MAX14577=y
+CONFIG_CHARGER_MAX77693=y
+CONFIG_CHARGER_MAX8997=y
+CONFIG_SENSORS_NTC_THERMISTOR=y
+CONFIG_SENSORS_PWM_FAN=y
+CONFIG_SENSORS_INA2XX=y
+CONFIG_THERMAL_EMULATION=y
+CONFIG_S3C2410_WATCHDOG=y
+CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_I2C=y
+CONFIG_MFD_CROS_EC_SPI=y
+CONFIG_MFD_MAX77693=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_MAX14577=y
+CONFIG_REGULATOR_MAX8997=y
+CONFIG_REGULATOR_MAX8998=y
+CONFIG_REGULATOR_MAX77693=y
+CONFIG_REGULATOR_MAX77802=y
+CONFIG_REGULATOR_S2MPA01=y
+CONFIG_REGULATOR_WM8994=y
+CONFIG_DRM_EXYNOS=y
+CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
+CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
+CONFIG_DRM_NXP_PTN3460=y
+CONFIG_DRM_PARADE_PS8622=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_SAMSUNG=y
+CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=y
+CONFIG_SND_SOC_SMDK_WM8994_PCM=y
+CONFIG_SND_SOC_SNOW=y
+CONFIG_SND_SIMPLE_CARD=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_OHCI_EXYNOS=y
+CONFIG_USB_HSIC_USB3503=y
+CONFIG_USB_ETH=y
+CONFIG_LEDS_CLASS_FLASH=y
+CONFIG_LEDS_MAX77693=y
+CONFIG_LEDS_MAX8997=y
+CONFIG_RTC_DRV_MAX8997=y
+CONFIG_RTC_DRV_S5M=y
+CONFIG_RTC_DRV_S3C=y
+CONFIG_CROS_EC_CHARDEV=y
+CONFIG_COMMON_CLK_MAX77802=y
+CONFIG_COMMON_CLK_S2MPS11=y
+CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
+CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
+CONFIG_EXTCON_MAX14577=y
+CONFIG_EXTCON_MAX77693=y
+CONFIG_EXTCON_MAX8997=y
+CONFIG_EXYNOS_ADC=y
+CONFIG_CM36651=y
+CONFIG_PWM_SAMSUNG=y
+CONFIG_PHY_EXYNOS5250_SATA=y
+CONFIG_CRYPTO_DEV_S5P=y
diff --git a/arch/arm/configs/exynos/hw_y_shared.config b/arch/arm/configs/exynos/hw_y_shared.config
new file mode 100644
index 0000000..8bf9345
--- /dev/null
+++ b/arch/arm/configs/exynos/hw_y_shared.config
@@ -0,0 +1,93 @@
+CONFIG_ARCH_EXYNOS=y
+CONFIG_EXYNOS5420_MCPM=y
+CONFIG_SMP=y
+CONFIG_CMA=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+CONFIG_CPU_IDLE=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=64
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC911X=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_INPUT_MISC=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_SPI=y
+CONFIG_BATTERY_SBS=y
+CONFIG_CHARGER_TPS65090=y
+CONFIG_SENSORS_LM90=y
+CONFIG_CPU_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_MFD_MAX14577=y
+CONFIG_MFD_MAX77686=y
+CONFIG_MFD_MAX8997=y
+CONFIG_MFD_MAX8998=y
+CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_TPS65090=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_MAX77686=y
+CONFIG_REGULATOR_S2MPS11=y
+CONFIG_REGULATOR_S5M8767=y
+CONFIG_REGULATOR_TPS65090=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_V4L_TEST_DRIVERS=y
+CONFIG_DRM=y
+CONFIG_DRM_EXYNOS_FIMD=y
+CONFIG_DRM_EXYNOS_MIXER=y
+CONFIG_DRM_EXYNOS_DPI=y
+CONFIG_DRM_EXYNOS_DSI=y
+CONFIG_DRM_EXYNOS_HDMI=y
+CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_EXYNOS=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_GADGET=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_S3C=y
+CONFIG_MMC_SDHCI_S3C_DMA=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_EXYNOS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MAX77686=y
+CONFIG_DMADEVICES=y
+CONFIG_PL330_DMA=y
+CONFIG_COMMON_CLK_MAX77686=y
+CONFIG_PM_DEVFREQ=y
+CONFIG_EXTCON=y
+CONFIG_IIO=y
+CONFIG_AK8975=y
+CONFIG_PWM=y
+CONFIG_ARM_CRYPTO=y
diff --git a/arch/arm/configs/exynos/sys_y.config b/arch/arm/configs/exynos/sys_y.config
new file mode 100644
index 0000000..8f363f3
--- /dev/null
+++ b/arch/arm/configs/exynos/sys_y.config
@@ -0,0 +1,33 @@
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
+CONFIG_NET_KEY=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_LOGO=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NLS_ASCII=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_USER=y
+CONFIG_CRC_CCITT=y
+CONFIG_FONTS=y
+CONFIG_FONT_7x14=y
diff --git a/arch/arm/configs/exynos/sys_y_shared.config b/arch/arm/configs/exynos/sys_y_shared.config
new file mode 100644
index 0000000..0f3ff44
--- /dev/null
+++ b/arch/arm/configs/exynos/sys_y_shared.config
@@ -0,0 +1,37 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CGROUPS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SECCOMP=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_V4L_TEST_DRIVERS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOCKUP_DETECTOR=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
deleted file mode 100644
index c58f684..0000000
--- a/arch/arm/configs/exynos_defconfig
+++ /dev/null
@@ -1,274 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CGROUPS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ARCH_EXYNOS=y
-CONFIG_ARCH_EXYNOS3=y
-CONFIG_EXYNOS5420_MCPM=y
-CONFIG_SMP=y
-CONFIG_BIG_LITTLE=y
-CONFIG_NR_CPUS=8
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_CMA=y
-CONFIG_SECCOMP=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPU_IDLE=y
-CONFIG_ARM_EXYNOS_CPUIDLE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_KERNEL_MODE_NEON=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_ADVANCED_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_CFG80211=y
-CONFIG_RFKILL_REGULATOR=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=m
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-CONFIG_USB_RTL8152=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_SMSC75XX=y
-CONFIG_USB_NET_SMSC95XX=y
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_CROS_EC=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_CYAPA=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ATMEL_MXT=y
-CONFIG_TOUCHSCREEN_MMS114=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_MAX77693_HAPTIC=y
-CONFIG_INPUT_MAX8997_HAPTIC=y
-CONFIG_KEYBOARD_SAMSUNG=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_TCG_TPM=y
-CONFIG_TCG_TIS_I2C_INFINEON=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_ARB_GPIO_CHALLENGE=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_CROS_EC_TUNNEL=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_S3C64XX=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_WM8994=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_BATTERY_SBS=y
-CONFIG_BATTERY_MAX17040=y
-CONFIG_BATTERY_MAX17042=y
-CONFIG_CHARGER_MAX14577=y
-CONFIG_CHARGER_MAX77693=y
-CONFIG_CHARGER_MAX8997=y
-CONFIG_CHARGER_TPS65090=y
-CONFIG_SENSORS_LM90=y
-CONFIG_SENSORS_NTC_THERMISTOR=y
-CONFIG_SENSORS_PWM_FAN=y
-CONFIG_SENSORS_INA2XX=y
-CONFIG_CPU_THERMAL=y
-CONFIG_THERMAL_EMULATION=y
-CONFIG_WATCHDOG=y
-CONFIG_S3C2410_WATCHDOG=y
-CONFIG_MFD_CROS_EC=y
-CONFIG_MFD_CROS_EC_I2C=y
-CONFIG_MFD_CROS_EC_SPI=y
-CONFIG_MFD_MAX14577=y
-CONFIG_MFD_MAX77686=y
-CONFIG_MFD_MAX77693=y
-CONFIG_MFD_MAX8997=y
-CONFIG_MFD_MAX8998=y
-CONFIG_MFD_SEC_CORE=y
-CONFIG_MFD_TPS65090=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_MAX14577=y
-CONFIG_REGULATOR_MAX8997=y
-CONFIG_REGULATOR_MAX8998=y
-CONFIG_REGULATOR_MAX77686=y
-CONFIG_REGULATOR_MAX77693=y
-CONFIG_REGULATOR_MAX77802=y
-CONFIG_REGULATOR_S2MPA01=y
-CONFIG_REGULATOR_S2MPS11=y
-CONFIG_REGULATOR_S5M8767=y
-CONFIG_REGULATOR_TPS65090=y
-CONFIG_REGULATOR_WM8994=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
-CONFIG_VIDEO_S5P_FIMC=m
-CONFIG_VIDEO_S5P_MIPI_CSIS=m
-CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
-CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
-CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
-CONFIG_V4L_TEST_DRIVERS=y
-CONFIG_DRM=y
-CONFIG_DRM_EXYNOS=y
-CONFIG_DRM_EXYNOS_FIMD=y
-CONFIG_DRM_EXYNOS_MIXER=y
-CONFIG_DRM_EXYNOS_DPI=y
-CONFIG_DRM_EXYNOS_DSI=y
-CONFIG_DRM_EXYNOS_HDMI=y
-CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
-CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
-CONFIG_DRM_NXP_PTN3460=y
-CONFIG_DRM_PARADE_PS8622=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_SAMSUNG=y
-CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=y
-CONFIG_SND_SOC_SMDK_WM8994_PCM=y
-CONFIG_SND_SOC_SNOW=y
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_EXYNOS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_EXYNOS=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_HSIC_USB3503=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK_MINORS=16
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_S3C=y
-CONFIG_MMC_SDHCI_S3C_DMA=y
-CONFIG_MMC_DW=y
-CONFIG_MMC_DW_EXYNOS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_CLASS_FLASH=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_MAX77693=y
-CONFIG_LEDS_MAX8997=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_MAX8997=y
-CONFIG_RTC_DRV_MAX77686=y
-CONFIG_RTC_DRV_S5M=y
-CONFIG_RTC_DRV_S3C=y
-CONFIG_DMADEVICES=y
-CONFIG_PL330_DMA=y
-CONFIG_CROS_EC_CHARDEV=y
-CONFIG_COMMON_CLK_MAX77686=y
-CONFIG_COMMON_CLK_MAX77802=y
-CONFIG_COMMON_CLK_S2MPS11=y
-CONFIG_PM_DEVFREQ=y
-CONFIG_DEVFREQ_GOV_PERFORMANCE=y
-CONFIG_DEVFREQ_GOV_POWERSAVE=y
-CONFIG_DEVFREQ_GOV_USERSPACE=y
-CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
-CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
-CONFIG_EXTCON=y
-CONFIG_EXTCON_MAX14577=y
-CONFIG_EXTCON_MAX77693=y
-CONFIG_EXTCON_MAX8997=y
-CONFIG_IIO=y
-CONFIG_EXYNOS_ADC=y
-CONFIG_CM36651=y
-CONFIG_AK8975=y
-CONFIG_PWM=y
-CONFIG_PWM_SAMSUNG=y
-CONFIG_PHY_EXYNOS5250_SATA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_DEV_S5P=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA256_ARM=m
-CONFIG_CRYPTO_SHA512_ARM=m
-CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRC_CCITT=y
-CONFIG_FONTS=y
-CONFIG_FONT_7x14=y
-CONFIG_VIDEO_VIVID=m
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_base_defconfig
similarity index 84%
rename from arch/arm/configs/multi_v7_defconfig
rename to arch/arm/configs/multi_v7_base_defconfig
index 11f37ed..d801901 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_base_defconfig
@@ -1,15 +1,7 @@
-CONFIG_SYSVIPC=y
CONFIG_FHANDLE=y
CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CGROUPS=y
-CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
CONFIG_CMDLINE_PARTITION=y
CONFIG_ARCH_MULTI_V7=y
# CONFIG_ARCH_MULTI_V5 is not set
@@ -80,8 +72,6 @@ CONFIG_ARCH_SPEAR13XX=y
CONFIG_MACH_SPEAR1310=y
CONFIG_MACH_SPEAR1340=y
CONFIG_ARCH_STI=y
-CONFIG_ARCH_EXYNOS=y
-CONFIG_EXYNOS5420_MCPM=y
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_EMEV2=y
CONFIG_ARCH_R7S72100=y
@@ -122,38 +112,15 @@ CONFIG_PCI_TEGRA=y
CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCIE_RCAR=y
CONFIG_PCIEPORTBUS=y
-CONFIG_SMP=y
CONFIG_NR_CPUS=16
CONFIG_HIGHPTE=y
-CONFIG_CMA=y
-CONFIG_SECCOMP=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_KEXEC=y
CONFIG_EFI=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_ARM_IMX6Q_CPUFREQ=y
CONFIG_QORIQ_CPUFREQ=y
-CONFIG_CPU_IDLE=y
CONFIG_ARM_CPUIDLE=y
-CONFIG_NEON=y
-CONFIG_KERNEL_MODE_NEON=y
CONFIG_ARM_ZYNQ_CPUIDLE=y
CONFIG_ARM_EXYNOS_CPUIDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
@@ -182,10 +149,6 @@ CONFIG_MAC80211=m
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64
CONFIG_OMAP_OCP2SCP=y
CONFIG_SIMPLE_PM_BUS=y
CONFIG_SUNXI_RSB=m
@@ -202,8 +165,6 @@ CONFIG_MTD_NAND_DAVINCI=y
CONFIG_MTD_SPI_NOR=y
CONFIG_SPI_FSL_QUADSPI=m
CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_VIRTIO_BLK=y
CONFIG_AD525X_DPOT=y
@@ -215,7 +176,6 @@ CONFIG_QCOM_COINCELL=m
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_EEPROM_AT24=y
-CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_ATA=y
@@ -229,7 +189,6 @@ CONFIG_AHCI_TEGRA=y
CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
CONFIG_SATA_RCAR=y
-CONFIG_NETDEVICES=y
CONFIG_VIRTIO_NET=y
CONFIG_HIX5HD2_GMAC=y
CONFIG_SUN4I_EMAC=y
@@ -245,7 +204,6 @@ CONFIG_PXA168_ETH=m
CONFIG_KS8851=y
CONFIG_R8169=y
CONFIG_SH_ETH=y
-CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_SYNOPSYS_DWC_ETH_QOS=y
CONFIG_TI_CPSW=y
@@ -260,18 +218,11 @@ CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8152=m
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_SMSC75XX=y
-CONFIG_USB_NET_SMSC95XX=y
CONFIG_BRCMFMAC=m
CONFIG_RT2X00=m
CONFIG_RT2800USB=m
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m
CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_QT1070=m
-CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_TEGRA=y
CONFIG_KEYBOARD_SPEAR=y
CONFIG_KEYBOARD_ST_KEYSCAN=y
@@ -280,21 +231,18 @@ CONFIG_KEYBOARD_SAMSUNG=m
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=y
-CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SUN4I=y
CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_INPUT_MISC=y
CONFIG_INPUT_MAX77693_HAPTIC=m
CONFIG_INPUT_MAX8997_HAPTIC=m
CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_AXP20X_PEK=m
CONFIG_INPUT_ADXL34X=m
CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_EM=y
@@ -309,8 +257,6 @@ CONFIG_SERIAL_BCM63XX=y
CONFIG_SERIAL_BCM63XX_CONSOLE=y
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_SIRFSOC=y
CONFIG_SERIAL_SIRFSOC_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
@@ -336,9 +282,7 @@ CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
-CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DAVINCI=y
-CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
@@ -367,7 +311,6 @@ CONFIG_I2C_XILINX=y
CONFIG_I2C_RCAR=y
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_I2C_SLAVE_EEPROM=y
-CONFIG_SPI=y
CONFIG_SPI_ATMEL=m
CONFIG_SPI_BCM2835=y
CONFIG_SPI_BCM2835AUX=y
@@ -421,14 +364,12 @@ CONFIG_GPIO_SYSCON=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_BATTERY_ACT8945A=y
-CONFIG_BATTERY_SBS=y
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_MAX77693=m
CONFIG_CHARGER_MAX8997=m
CONFIG_CHARGER_MAX8998=m
-CONFIG_CHARGER_TPS65090=y
CONFIG_AXP20X_POWER=m
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_GPIO=y
@@ -439,12 +380,10 @@ CONFIG_POWER_RESET_ST=y
CONFIG_POWER_AVS=y
CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_SENSORS_IIO_HWMON=y
-CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_INA2XX=m
-CONFIG_CPU_THERMAL=y
CONFIG_ROCKCHIP_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_ARMADA_THERMAL=y
@@ -452,7 +391,6 @@ CONFIG_DAVINCI_WATCHDOG=m
CONFIG_EXYNOS_THERMAL=m
CONFIG_ST_THERMAL_SYSCFG=y
CONFIG_ST_THERMAL_MEMMAP=y
-CONFIG_WATCHDOG=y
CONFIG_DA9063_WATCHDOG=m
CONFIG_XILINX_WATCHDOG=y
CONFIG_ARM_SP805_WATCHDOG=y
@@ -482,20 +420,14 @@ CONFIG_MFD_CROS_EC=m
CONFIG_MFD_CROS_EC_I2C=m
CONFIG_MFD_CROS_EC_SPI=m
CONFIG_MFD_DA9063=m
-CONFIG_MFD_MAX14577=y
-CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=m
CONFIG_MFD_MAX8907=y
-CONFIG_MFD_MAX8997=y
-CONFIG_MFD_MAX8998=y
CONFIG_MFD_RK808=y
CONFIG_MFD_PM8921_CORE=y
CONFIG_MFD_QCOM_RPM=y
CONFIG_MFD_SPMI_PMIC=y
-CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_PALMAS=y
-CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
@@ -511,7 +443,6 @@ CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_RK808=y
-CONFIG_REGULATOR_GPIO=y
CONFIG_MFD_SYSCON=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_REGULATOR_LP872X=y
@@ -520,7 +451,6 @@ CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=m
CONFIG_REGULATOR_MAX8998=m
-CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=m
CONFIG_REGULATOR_MAX77802=m
CONFIG_REGULATOR_PALMAS=y
@@ -528,12 +458,9 @@ CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_RPM=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
-CONFIG_REGULATOR_S2MPS11=y
-CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TI_ABB=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y
-CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS6586X=y
@@ -541,34 +468,18 @@ CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_VEXPRESS=y
CONFIG_REGULATOR_WM8994=m
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_GSPCA=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_PLATFORM=m
CONFIG_VIDEO_RCAR_VIN=m
CONFIG_VIDEO_ATMEL_ISI=m
-CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
-CONFIG_VIDEO_S5P_FIMC=m
-CONFIG_VIDEO_S5P_MIPI_CSIS=m
-CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
-CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
-CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
CONFIG_VIDEO_STI_BDISP=m
CONFIG_VIDEO_RENESAS_JPU=m
CONFIG_VIDEO_RENESAS_VSP1=m
-CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_ML86V7667=m
-CONFIG_DRM=y
CONFIG_DRM_I2C_ADV7511=m
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
@@ -576,11 +487,6 @@ CONFIG_DRM_NXP_PTN3460=m
CONFIG_DRM_PARADE_PS8622=m
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_EXYNOS=m
-CONFIG_DRM_EXYNOS_FIMD=y
-CONFIG_DRM_EXYNOS_MIXER=y
-CONFIG_DRM_EXYNOS_DPI=y
-CONFIG_DRM_EXYNOS_DSI=y
-CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_ROCKCHIP=m
CONFIG_ROCKCHIP_ANALOGIX_DP=m
CONFIG_ROCKCHIP_DW_HDMI=m
@@ -594,7 +500,6 @@ CONFIG_DRM_SUN4I=m
CONFIG_DRM_TEGRA=y
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
-CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DRM_STI=m
CONFIG_DRM_VC4=y
CONFIG_FB_ARMCLCD=y
@@ -606,7 +511,6 @@ CONFIG_FB_SH_MOBILE_MERAM=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=m
-CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
@@ -649,29 +553,21 @@ CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_WM8978=m
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_XHCI_RCAR=m
CONFIG_USB_XHCI_TEGRA=m
-CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MSM=m
-CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_HCD_STI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_ISP1760=y
-CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_STI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_EXYNOS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_RENESAS_USBHS=m
-CONFIG_USB_STORAGE=y
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_SUNXI=m
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC2=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
@@ -682,14 +578,10 @@ CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MSM_OTG=m
CONFIG_USB_MXS_PHY=y
-CONFIG_USB_GADGET=y
CONFIG_USB_FSL_USB2=y
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_OF_AT91=y
@@ -699,8 +591,6 @@ CONFIG_MMC_SDHCI_DOVE=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_PXAV3=y
CONFIG_MMC_SDHCI_SPEAR=y
-CONFIG_MMC_SDHCI_S3C=y
-CONFIG_MMC_SDHCI_S3C_DMA=y
CONFIG_MMC_SDHCI_BCM_KONA=y
CONFIG_MMC_SDHCI_ST=y
CONFIG_MMC_OMAP=y
@@ -709,24 +599,16 @@ CONFIG_MMC_ATMELMCI=y
CONFIG_MMC_SDHCI_MSM=y
CONFIG_MMC_MVSDIO=y
CONFIG_MMC_SDHI=y
-CONFIG_MMC_DW=y
CONFIG_MMC_DW_IDMAC=y
CONFIG_MMC_DW_PLTFM=y
-CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_MMC_SUNXI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
CONFIG_LEDS_MAX77693=m
CONFIG_LEDS_MAX8997=m
-CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
@@ -737,14 +619,12 @@ CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_HIGHBANK_MC=y
CONFIG_EDAC_HIGHBANK_L2=y
-CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_HYM8563=m
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8998=m
CONFIG_RTC_DRV_MAX8997=m
-CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_PALMAS=y
@@ -768,7 +648,6 @@ CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_RTC_DRV_MV=y
CONFIG_RTC_DRV_TEGRA=y
-CONFIG_DMADEVICES=y
CONFIG_DW_DMAC=y
CONFIG_AT_HDMAC=y
CONFIG_AT_XDMAC=y
@@ -781,7 +660,6 @@ CONFIG_RENESAS_USB_DMAC=m
CONFIG_STE_DMA40=y
CONFIG_SIRF_DMA=y
CONFIG_TI_EDMA=y
-CONFIG_PL330_DMA=y
CONFIG_IMX_SDMA=y
CONFIG_IMX_DMA=y
CONFIG_MXS_DMA=y
@@ -811,7 +689,6 @@ CONFIG_COMMON_CLK_QCOM=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_STAGING_BOARD=y
CONFIG_CROS_EC_CHARDEV=m
-CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_MAX77802=m
CONFIG_COMMON_CLK_RK808=m
CONFIG_COMMON_CLK_S2MPS11=m
@@ -823,12 +700,9 @@ CONFIG_HWSPINLOCK_QCOM=y
CONFIG_ROCKCHIP_IOMMU=y
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
-CONFIG_PM_DEVFREQ=y
CONFIG_ARM_TEGRA_DEVFREQ=m
CONFIG_MEMORY=y
-CONFIG_EXTCON=y
CONFIG_TI_AEMIF=y
-CONFIG_IIO=y
CONFIG_AT91_ADC=m
CONFIG_AT91_SAMA5D2_ADC=m
CONFIG_BERLIN2_ADC=m
@@ -836,9 +710,7 @@ CONFIG_EXYNOS_ADC=m
CONFIG_VF610_ADC=m
CONFIG_XILINX_XADC=y
CONFIG_CM36651=m
-CONFIG_AK8975=y
CONFIG_RASPBERRYPI_POWER=y
-CONFIG_PWM=y
CONFIG_PWM_ATMEL=m
CONFIG_PWM_ATMEL_HLCDC_PWM=m
CONFIG_PWM_ATMEL_TCB=m
@@ -878,27 +750,14 @@ CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_EFI_VARS=m
CONFIG_EFI_CAPSULE_LOADER=m
CONFIG_EXT4_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
-CONFIG_TMPFS_POSIX_ACL=y
CONFIG_UBIFS_FS=y
CONFIG_TMPFS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
-CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOCKUP_DETECTOR=y
CONFIG_CRYPTO_DEV_TEGRA_AES=y
CONFIG_CPUFREQ_DT=y
CONFIG_KEYSTONE_IRQ=y
@@ -908,21 +767,15 @@ CONFIG_CRYPTO_DEV_MARVELL_CESA=m
CONFIG_CRYPTO_DEV_S5P=m
CONFIG_CRYPTO_DEV_SUN4I_SS=m
CONFIG_CRYPTO_DEV_ROCKCHIP=m
-CONFIG_ARM_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM=m
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
CONFIG_CRYPTO_SHA1_ARM_CE=m
CONFIG_CRYPTO_SHA2_ARM_CE=m
-CONFIG_CRYPTO_SHA256_ARM=m
-CONFIG_CRYPTO_SHA512_ARM=m
CONFIG_CRYPTO_AES_ARM=m
-CONFIG_CRYPTO_AES_ARM_BS=m
CONFIG_CRYPTO_AES_ARM_CE=m
CONFIG_CRYPTO_GHASH_ARM_CE=m
CONFIG_CRYPTO_DEV_ATMEL_AES=m
CONFIG_CRYPTO_DEV_ATMEL_TDES=m
CONFIG_CRYPTO_DEV_ATMEL_SHA=m
-CONFIG_VIDEO_VIVID=m
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
--
1.9.1
^ permalink raw reply related
* [RFC PATCH 23/23] arm: use kconfig fragments for tegra_defconfig/multi_v7_defconfig
From: Bartlomiej Zolnierkiewicz @ 2016-12-06 12:38 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1481027938-31831-1-git-send-email-b.zolnierkie@samsung.com>
Replace [tegra,multi_v7]_defconfig-s with
a Makefile target using merge_config.
The patch was verified with doing:
$ make [tegra,multi_v7]_defconfig
$ make savedefconfig
and comparing resulting defconfig files (before/after the patch).
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-tegra at vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
arch/arm/Makefile | 6 +-
arch/arm/configs/multi_v7_base_defconfig | 121 ------------
arch/arm/configs/tegra/hw_m.config | 1 +
arch/arm/configs/tegra/hw_m_shared.config | 3 +
arch/arm/configs/tegra/hw_y.config | 48 +++++
arch/arm/configs/tegra/hw_y_shared.config | 151 ++++++++++++++
arch/arm/configs/tegra/sys_y.config | 63 ++++++
arch/arm/configs/tegra/sys_y_shared.config | 40 ++++
arch/arm/configs/tegra_defconfig | 305 -----------------------------
9 files changed, 311 insertions(+), 427 deletions(-)
create mode 100644 arch/arm/configs/tegra/hw_m.config
create mode 100644 arch/arm/configs/tegra/hw_m_shared.config
create mode 100644 arch/arm/configs/tegra/hw_y.config
create mode 100644 arch/arm/configs/tegra/hw_y_shared.config
create mode 100644 arch/arm/configs/tegra/sys_y.config
create mode 100644 arch/arm/configs/tegra/sys_y_shared.config
delete mode 100644 arch/arm/configs/tegra_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 12a8da9..6dd79bb 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -442,9 +442,13 @@ PHONY += exynos_defconfig
exynos_defconfig:
$(call merge_into_defconfig,dummy_defconfig,exynos/hw_y exynos/hw_y_shared exynos/hw_m exynos/hw_m_shared exynos/sys_y exynos/sys_y_shared)
+PHONY += tegra_defconfig
+tegra_defconfig:
+ $(call merge_into_defconfig,dummy_defconfig,tegra/hw_y tegra/hw_y_shared tegra/hw_m tegra/hw_m_shared tegra/sys_y tegra/sys_y_shared)
+
PHONY += multi_v7_defconfig
multi_v7_defconfig:
- $(call merge_into_defconfig,multi_v7_base_defconfig,exynos/hw_y_shared exynos/hw_m_shared exynos/sys_y_shared)
+ $(call merge_into_defconfig,multi_v7_base_defconfig,exynos/hw_y_shared exynos/hw_m_shared exynos/sys_y_shared tegra/hw_y_shared tegra/hw_m_shared tegra/sys_y_shared)
PHONY += vdso_install
vdso_install:
diff --git a/arch/arm/configs/multi_v7_base_defconfig b/arch/arm/configs/multi_v7_base_defconfig
index d801901..519bf62 100644
--- a/arch/arm/configs/multi_v7_base_defconfig
+++ b/arch/arm/configs/multi_v7_base_defconfig
@@ -1,7 +1,3 @@
-CONFIG_FHANDLE=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
CONFIG_CMDLINE_PARTITION=y
CONFIG_ARCH_MULTI_V7=y
# CONFIG_ARCH_MULTI_V5 is not set
@@ -87,11 +83,6 @@ CONFIG_ARCH_R8A7794=y
CONFIG_ARCH_SH73A0=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_SIRF=y
-CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_TEGRA_2x_SOC=y
-CONFIG_ARCH_TEGRA_3x_SOC=y
-CONFIG_ARCH_TEGRA_114_SOC=y
-CONFIG_ARCH_TEGRA_124_SOC=y
CONFIG_TEGRA_EMC_SCALING_ENABLE=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_ARCH_U8500=y
@@ -103,42 +94,32 @@ CONFIG_ARCH_VEXPRESS_TC2_PM=y
CONFIG_ARCH_WM8850=y
CONFIG_ARCH_ZYNQ=y
CONFIG_TRUSTED_FOUNDATIONS=y
-CONFIG_PCI=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCI_KEYSTONE=y
-CONFIG_PCI_MSI=y
CONFIG_PCI_MVEBU=y
-CONFIG_PCI_TEGRA=y
CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCIE_RCAR=y
-CONFIG_PCIEPORTBUS=y
CONFIG_NR_CPUS=16
CONFIG_HIGHPTE=y
-CONFIG_KEXEC=y
CONFIG_EFI=y
CONFIG_ARM_IMX6Q_CPUFREQ=y
CONFIG_QORIQ_CPUFREQ=y
CONFIG_ARM_CPUIDLE=y
CONFIG_ARM_ZYNQ_CPUIDLE=y
CONFIG_ARM_EXYNOS_CPUIDLE=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_NET_DSA=m
CONFIG_NET_SWITCHDEV=y
-CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_DEV=y
CONFIG_CAN_AT91=m
CONFIG_CAN_RCAR=m
CONFIG_CAN_XILINXCAN=y
-CONFIG_CAN_MCP251X=y
CONFIG_NET_DSA_BCM_SF2=m
CONFIG_CAN_SUN4I=y
CONFIG_BT=m
@@ -146,46 +127,30 @@ CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_CFG80211=m
CONFIG_MAC80211=m
-CONFIG_RFKILL=y
-CONFIG_RFKILL_INPUT=y
-CONFIG_RFKILL_GPIO=y
CONFIG_OMAP_OCP2SCP=y
CONFIG_SIMPLE_PM_BUS=y
CONFIG_SUNXI_RSB=m
-CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_BRCMNAND=y
CONFIG_MTD_NAND_VF610_NFC=y
CONFIG_MTD_NAND_DAVINCI=y
-CONFIG_MTD_SPI_NOR=y
CONFIG_SPI_FSL_QUADSPI=m
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_VIRTIO_BLK=y
-CONFIG_AD525X_DPOT=y
-CONFIG_AD525X_DPOT_I2C=y
CONFIG_ATMEL_TCLIB=y
-CONFIG_ICS932S401=y
CONFIG_ATMEL_SSC=m
CONFIG_QCOM_COINCELL=m
-CONFIG_APDS9802ALS=y
-CONFIG_ISL29003=y
-CONFIG_EEPROM_AT24=y
-CONFIG_BLK_DEV_SR=y
CONFIG_SCSI_MULTI_LUN=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_BRCM=y
CONFIG_AHCI_ST=y
CONFIG_AHCI_IMX=y
CONFIG_AHCI_SUNXI=y
-CONFIG_AHCI_TEGRA=y
CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
CONFIG_SATA_RCAR=y
@@ -197,12 +162,10 @@ CONFIG_BCMGENET=m
CONFIG_SYSTEMPORT=m
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_GIANFAR=y
-CONFIG_IGB=y
CONFIG_MV643XX_ETH=y
CONFIG_MVNETA=y
CONFIG_PXA168_ETH=m
CONFIG_KS8851=y
-CONFIG_R8169=y
CONFIG_SH_ETH=y
CONFIG_STMMAC_ETH=y
CONFIG_SYNOPSYS_DWC_ETH_QOS=y
@@ -216,34 +179,25 @@ CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
-CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8152=m
-CONFIG_BRCMFMAC=m
CONFIG_RT2X00=m
-CONFIG_RT2800USB=m
-CONFIG_INPUT_JOYDEV=y
CONFIG_KEYBOARD_QT1070=m
-CONFIG_KEYBOARD_TEGRA=y
CONFIG_KEYBOARD_SPEAR=y
CONFIG_KEYBOARD_ST_KEYSCAN=y
CONFIG_KEYBOARD_CROS_EC=m
CONFIG_KEYBOARD_SAMSUNG=m
-CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_ST1232=m
-CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SUN4I=y
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_INPUT_MAX77693_HAPTIC=m
CONFIG_INPUT_MAX8997_HAPTIC=m
-CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_AXP20X_PEK=m
CONFIG_INPUT_ADXL34X=m
CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_8250_MT6577=y
@@ -259,7 +213,6 @@ CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_SIRFSOC=y
CONFIG_SERIAL_SIRFSOC_CONSOLE=y
-CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_SH_SCI=y
@@ -269,7 +222,6 @@ CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_VT8500=y
CONFIG_SERIAL_VT8500_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
@@ -284,8 +236,6 @@ CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_I2C_DAVINCI=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_AT91=m
CONFIG_I2C_BCM2835=y
@@ -304,7 +254,6 @@ CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_SIRF=y
CONFIG_I2C_ST=y
CONFIG_I2C_SUN6I_P2WI=y
-CONFIG_I2C_TEGRA=y
CONFIG_I2C_UNIPHIER=y
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_XILINX=y
@@ -329,14 +278,9 @@ CONFIG_SPI_SH_HSPI=y
CONFIG_SPI_SIRF=y
CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=y
-CONFIG_SPI_TEGRA114=y
-CONFIG_SPI_TEGRA20_SFLASH=y
-CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_SPI_XILINX=y
CONFIG_SPI_SPIDEV=y
CONFIG_SPMI=y
-CONFIG_PINCTRL_AS3722=y
-CONFIG_PINCTRL_PALMAS=y
CONFIG_PINCTRL_BCM2835=y
CONFIG_PINCTRL_APQ8064=y
CONFIG_PINCTRL_APQ8084=y
@@ -347,7 +291,6 @@ CONFIG_PINCTRL_MSM8X74=y
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
-CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_DAVINCI=y
CONFIG_GPIO_DWAPB=y
@@ -355,14 +298,9 @@ CONFIG_GPIO_EM=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_ZYNQ=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TWL4030=y
-CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_SYSCON=y
-CONFIG_GPIO_TPS6586X=y
-CONFIG_GPIO_TPS65910=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
@@ -371,8 +309,6 @@ CONFIG_CHARGER_MAX77693=m
CONFIG_CHARGER_MAX8997=m
CONFIG_CHARGER_MAX8998=m
CONFIG_AXP20X_POWER=m
-CONFIG_POWER_RESET_AS3722=y
-CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_POWER_RESET_KEYSTONE=y
CONFIG_POWER_RESET_RMOBILE=y
@@ -380,7 +316,6 @@ CONFIG_POWER_RESET_ST=y
CONFIG_POWER_AVS=y
CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_SENSORS_IIO_HWMON=y
-CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_INA2XX=m
@@ -409,7 +344,6 @@ CONFIG_BCM7038_WDT=m
CONFIG_BCM_KONA_WDT=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
-CONFIG_MFD_AS3722=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=m
CONFIG_MFD_BCM590XX=y
@@ -421,23 +355,17 @@ CONFIG_MFD_CROS_EC_I2C=m
CONFIG_MFD_CROS_EC_SPI=m
CONFIG_MFD_DA9063=m
CONFIG_MFD_MAX77693=m
-CONFIG_MFD_MAX8907=y
CONFIG_MFD_RK808=y
CONFIG_MFD_PM8921_CORE=y
CONFIG_MFD_QCOM_RPM=y
CONFIG_MFD_SPMI_PMIC=y
-CONFIG_MFD_STMPE=y
-CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65218=y
-CONFIG_MFD_TPS6586X=y
-CONFIG_MFD_TPS65910=y
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_AS3711=y
-CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_AXP20X=m
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_DA9210=y
@@ -447,29 +375,21 @@ CONFIG_MFD_SYSCON=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_MAX14577=m
-CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=m
CONFIG_REGULATOR_MAX8998=m
CONFIG_REGULATOR_MAX77693=m
CONFIG_REGULATOR_MAX77802=m
-CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_QCOM_RPM=y
CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_TI_ABB=y
-CONFIG_REGULATOR_TPS51632=y
-CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65218=y
-CONFIG_REGULATOR_TPS6586X=y
-CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_VEXPRESS=y
CONFIG_REGULATOR_WM8994=m
-CONFIG_USB_VIDEO_CLASS=y
-CONFIG_USB_GSPCA=y
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_PLATFORM=m
CONFIG_VIDEO_RCAR_VIN=m
@@ -485,7 +405,6 @@ CONFIG_DRM_I2C_ADV7511=m
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_NXP_PTN3460=m
CONFIG_DRM_PARADE_PS8622=m
-CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_EXYNOS=m
CONFIG_DRM_ROCKCHIP=m
CONFIG_ROCKCHIP_ANALOGIX_DP=m
@@ -497,7 +416,6 @@ CONFIG_DRM_RCAR_DU=m
CONFIG_DRM_RCAR_HDMI=y
CONFIG_DRM_RCAR_LVDS=y
CONFIG_DRM_SUN4I=m
-CONFIG_DRM_TEGRA=y
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
CONFIG_DRM_STI=m
@@ -512,14 +430,10 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_AS3711=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_HDA_TEGRA=m
-CONFIG_SND_HDA_INPUT_BEEP=y
-CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_USB_AUDIO=m
@@ -557,7 +471,6 @@ CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_XHCI_RCAR=m
CONFIG_USB_XHCI_TEGRA=m
CONFIG_USB_EHCI_MSM=m
-CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_HCD_STI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_ISP1760=y
@@ -582,13 +495,11 @@ CONFIG_USB_FSL_USB2=y
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_USB_ETH=m
CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_SDHCI_OF_ESDHC=m
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_DOVE=y
-CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_PXAV3=y
CONFIG_MMC_SDHCI_SPEAR=y
CONFIG_MMC_SDHCI_BCM_KONA=y
@@ -607,34 +518,21 @@ CONFIG_MMC_SUNXI=y
CONFIG_LEDS_CLASS_FLASH=m
CONFIG_LEDS_MAX77693=m
CONFIG_LEDS_MAX8997=m
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_LEDS_TRIGGER_TRANSIENT=y
-CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_HIGHBANK_MC=y
CONFIG_EDAC_HIGHBANK_L2=y
-CONFIG_RTC_DRV_AS3722=y
-CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_HYM8563=m
-CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8998=m
CONFIG_RTC_DRV_MAX8997=m
CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_RS5C372=m
-CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_ST_LPC=y
CONFIG_RTC_DRV_TWL4030=y
-CONFIG_RTC_DRV_TPS6586X=y
-CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_RX8581=m
-CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_DA9063=m
CONFIG_RTC_DRV_EFI=m
CONFIG_RTC_DRV_DIGICOLOR=m
@@ -647,13 +545,11 @@ CONFIG_RTC_DRV_VT8500=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_RTC_DRV_MV=y
-CONFIG_RTC_DRV_TEGRA=y
CONFIG_DW_DMAC=y
CONFIG_AT_HDMAC=y
CONFIG_AT_XDMAC=y
CONFIG_FSL_EDMA=y
CONFIG_MV_XOR=y
-CONFIG_TEGRA20_APB_DMA=y
CONFIG_SH_DMAE=y
CONFIG_RCAR_DMAC=y
CONFIG_RENESAS_USB_DMAC=m
@@ -668,14 +564,6 @@ CONFIG_DMA_OMAP=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_XILINX_DMA=y
CONFIG_DMA_SUN6I=y
-CONFIG_STAGING=y
-CONFIG_SENSORS_ISL29018=y
-CONFIG_SENSORS_ISL29028=y
-CONFIG_MFD_NVEC=y
-CONFIG_KEYBOARD_NVEC=y
-CONFIG_SERIO_NVEC_PS2=y
-CONFIG_NVEC_POWER=y
-CONFIG_NVEC_PAZ00=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_PM=y
CONFIG_QCOM_SMEM=y
@@ -698,10 +586,7 @@ CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_ROCKCHIP_IOMMU=y
-CONFIG_TEGRA_IOMMU_GART=y
-CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_ARM_TEGRA_DEVFREQ=m
-CONFIG_MEMORY=y
CONFIG_TI_AEMIF=y
CONFIG_AT91_ADC=m
CONFIG_AT91_SAMA5D2_ADC=m
@@ -719,7 +604,6 @@ CONFIG_PWM_RENESAS_TPU=y
CONFIG_PWM_ROCKCHIP=m
CONFIG_PWM_SAMSUNG=m
CONFIG_PWM_SUN4I=y
-CONFIG_PWM_TEGRA=y
CONFIG_PWM_VT8500=y
CONFIG_PHY_HIX5HD2_SATA=y
CONFIG_E1000E=y
@@ -741,7 +625,6 @@ CONFIG_PHY_STIH407_USB=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_SUN9I_USB=y
CONFIG_PHY_SAMSUNG_USB2=m
-CONFIG_PHY_TEGRA_XUSB=y
CONFIG_PHY_BRCM_SATA=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SUNXI_SID=y
@@ -752,10 +635,6 @@ CONFIG_EFI_CAPSULE_LOADER=m
CONFIG_EXT4_FS=y
CONFIG_NTFS_FS=y
CONFIG_UBIFS_FS=y
-CONFIG_TMPFS=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_XZ=y
CONFIG_NFS_V3_ACL=y
CONFIG_NLS_UTF8=y
CONFIG_CRYPTO_DEV_TEGRA_AES=y
diff --git a/arch/arm/configs/tegra/hw_m.config b/arch/arm/configs/tegra/hw_m.config
new file mode 100644
index 0000000..87df533
--- /dev/null
+++ b/arch/arm/configs/tegra/hw_m.config
@@ -0,0 +1 @@
+CONFIG_BT_HCIBTUSB=m
diff --git a/arch/arm/configs/tegra/hw_m_shared.config b/arch/arm/configs/tegra/hw_m_shared.config
new file mode 100644
index 0000000..3dee37f
--- /dev/null
+++ b/arch/arm/configs/tegra/hw_m_shared.config
@@ -0,0 +1,3 @@
+CONFIG_BRCMFMAC=m
+CONFIG_RT2800USB=m
+CONFIG_DRM_NOUVEAU=m
diff --git a/arch/arm/configs/tegra/hw_y.config b/arch/arm/configs/tegra/hw_y.config
new file mode 100644
index 0000000..904c44e
--- /dev/null
+++ b/arch/arm/configs/tegra/hw_y.config
@@ -0,0 +1,48 @@
+CONFIG_HIGHMEM=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_HIDP=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_RT2X00=y
+CONFIG_KEYBOARD_CROS_EC=y
+CONFIG_KEYBOARD_NVEC=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_WM97XX=y
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+CONFIG_POWER_RESET=y
+CONFIG_TEGRA_WATCHDOG=y
+CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_SPI=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_HDA_TEGRA=y
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_HDMI=y
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_TEGRA=y
+CONFIG_SND_SOC_TEGRA_RT5640=y
+CONFIG_SND_SOC_TEGRA_WM8753=y
+CONFIG_SND_SOC_TEGRA_WM8903=y
+CONFIG_SND_SOC_TEGRA_WM9712=y
+CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
+CONFIG_SND_SOC_TEGRA_ALC5632=y
+CONFIG_SND_SOC_TEGRA_MAX98090=y
+CONFIG_USB_XHCI_TEGRA=y
diff --git a/arch/arm/configs/tegra/hw_y_shared.config b/arch/arm/configs/tegra/hw_y_shared.config
new file mode 100644
index 0000000..e74fa88
--- /dev/null
+++ b/arch/arm/configs/tegra/hw_y_shared.config
@@ -0,0 +1,151 @@
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_TEGRA_2x_SOC=y
+CONFIG_ARCH_TEGRA_3x_SOC=y
+CONFIG_ARCH_TEGRA_114_SOC=y
+CONFIG_ARCH_TEGRA_124_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_TEGRA=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_SMP=y
+CONFIG_CMA=y
+CONFIG_NEON=y
+CONFIG_CAN=y
+CONFIG_CAN_MCP251X=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_GPIO=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=64
+CONFIG_MTD=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_AD525X_DPOT=y
+CONFIG_AD525X_DPOT_I2C=y
+CONFIG_ICS932S401=y
+CONFIG_APDS9802ALS=y
+CONFIG_ISL29003=y
+CONFIG_EEPROM_AT24=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_AHCI_TEGRA=y
+CONFIG_NETDEVICES=y
+CONFIG_IGB=y
+CONFIG_R8169=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_TEGRA=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_STMPE=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MPU3050=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX_PINCTRL=y
+CONFIG_I2C_TEGRA=y
+CONFIG_SPI=y
+CONFIG_SPI_TEGRA114=y
+CONFIG_SPI_TEGRA20_SFLASH=y
+CONFIG_SPI_TEGRA20_SLINK=y
+CONFIG_PINCTRL_AS3722=y
+CONFIG_PINCTRL_PALMAS=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_PALMAS=y
+CONFIG_GPIO_TPS6586X=y
+CONFIG_GPIO_TPS65910=y
+CONFIG_BATTERY_SBS=y
+CONFIG_CHARGER_TPS65090=y
+CONFIG_POWER_RESET_AS3722=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM95245=y
+CONFIG_WATCHDOG=y
+CONFIG_MFD_AS3722=y
+CONFIG_MFD_MAX8907=y
+CONFIG_MFD_STMPE=y
+CONFIG_MFD_PALMAS=y
+CONFIG_MFD_TPS65090=y
+CONFIG_MFD_TPS6586X=y
+CONFIG_MFD_TPS65910=y
+CONFIG_REGULATOR_AS3722=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_MAX8907=y
+CONFIG_REGULATOR_PALMAS=y
+CONFIG_REGULATOR_TPS51632=y
+CONFIG_REGULATOR_TPS62360=y
+CONFIG_REGULATOR_TPS65090=y
+CONFIG_REGULATOR_TPS6586X=y
+CONFIG_REGULATOR_TPS65910=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_USB_GSPCA=y
+CONFIG_DRM=y
+CONFIG_DRM_TEGRA=y
+CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_SND_HDA_INPUT_BEEP=y
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_LEDS_TRIGGER_CAMERA=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AS3722=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_MAX8907=y
+CONFIG_RTC_DRV_PALMAS=y
+CONFIG_RTC_DRV_TPS6586X=y
+CONFIG_RTC_DRV_TPS65910=y
+CONFIG_RTC_DRV_EM3027=y
+CONFIG_RTC_DRV_TEGRA=y
+CONFIG_DMADEVICES=y
+CONFIG_TEGRA20_APB_DMA=y
+CONFIG_STAGING=y
+CONFIG_SENSORS_ISL29018=y
+CONFIG_SENSORS_ISL29028=y
+CONFIG_MFD_NVEC=y
+CONFIG_KEYBOARD_NVEC=y
+CONFIG_SERIO_NVEC_PS2=y
+CONFIG_NVEC_POWER=y
+CONFIG_NVEC_PAZ00=y
+CONFIG_TEGRA_IOMMU_GART=y
+CONFIG_TEGRA_IOMMU_SMMU=y
+CONFIG_MEMORY=y
+CONFIG_IIO=y
+CONFIG_AK8975=y
+CONFIG_PWM=y
+CONFIG_PWM_TEGRA=y
+CONFIG_PHY_TEGRA_XUSB=y
diff --git a/arch/arm/configs/tegra/sys_y.config b/arch/arm/configs/tegra/sys_y.config
new file mode 100644
index 0000000..78a901f
--- /dev/null
+++ b/arch/arm/configs/tegra/sys_y.config
@@ -0,0 +1,63 @@
+CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_ELF_CORE is not set
+CONFIG_SLAB=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_NET_KEY=y
+CONFIG_INET_ESP=y
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+CONFIG_IPV6_MIP6=y
+CONFIG_IPV6_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_DUMMY=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_I2C_COMPAT is not set
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_LOGO=y
+CONFIG_USB_ACM=y
+CONFIG_USB_WDM=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_VM=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SG=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/tegra/sys_y_shared.config b/arch/arm/configs/tegra/sys_y_shared.config
new file mode 100644
index 0000000..f5c9403
--- /dev/null
+++ b/arch/arm/configs/tegra/sys_y_shared.config
@@ -0,0 +1,40 @@
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CGROUPS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_KEXEC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
deleted file mode 100644
index 6012a1e..0000000
--- a/arch/arm/configs/tegra_defconfig
+++ /dev/null
@@ -1,305 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_ELF_CORE is not set
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_TEGRA_2x_SOC=y
-CONFIG_ARCH_TEGRA_3x_SOC=y
-CONFIG_ARCH_TEGRA_114_SOC=y
-CONFIG_ARCH_TEGRA_124_SOC=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_TEGRA=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_SMP=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_CMA=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPU_IDLE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_INET_ESP=y
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_IPV6_MIP6=y
-CONFIG_IPV6_TUNNEL=y
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_CAN=y
-CONFIG_CAN_MCP251X=y
-CONFIG_BT=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIBTUSB=m
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_RFKILL=y
-CONFIG_RFKILL_INPUT=y
-CONFIG_RFKILL_GPIO=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64
-CONFIG_MTD=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_AD525X_DPOT=y
-CONFIG_AD525X_DPOT_I2C=y
-CONFIG_ICS932S401=y
-CONFIG_APDS9802ALS=y
-CONFIG_ISL29003=y
-CONFIG_EEPROM_AT24=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_AHCI_TEGRA=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_IGB=y
-CONFIG_R8169=y
-CONFIG_USB_PEGASUS=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_SMSC75XX=y
-CONFIG_USB_NET_SMSC95XX=y
-CONFIG_BRCMFMAC=m
-CONFIG_RT2X00=y
-CONFIG_RT2800USB=m
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_TEGRA=y
-CONFIG_KEYBOARD_CROS_EC=y
-CONFIG_MOUSE_PS2_ELANTECH=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ATMEL_MXT=y
-CONFIG_TOUCHSCREEN_WM97XX=y
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-CONFIG_TOUCHSCREEN_STMPE=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_MPU3050=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_TEGRA=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_MUX_PINCTRL=y
-CONFIG_I2C_TEGRA=y
-CONFIG_SPI=y
-CONFIG_SPI_TEGRA114=y
-CONFIG_SPI_TEGRA20_SFLASH=y
-CONFIG_SPI_TEGRA20_SLINK=y
-CONFIG_PINCTRL_AS3722=y
-CONFIG_PINCTRL_PALMAS=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_PALMAS=y
-CONFIG_GPIO_TPS6586X=y
-CONFIG_GPIO_TPS65910=y
-CONFIG_BATTERY_SBS=y
-CONFIG_CHARGER_TPS65090=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_AS3722=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_SENSORS_LM90=y
-CONFIG_SENSORS_LM95245=y
-CONFIG_WATCHDOG=y
-CONFIG_TEGRA_WATCHDOG=y
-CONFIG_MFD_AS3722=y
-CONFIG_MFD_CROS_EC=y
-CONFIG_MFD_CROS_EC_SPI=y
-CONFIG_MFD_MAX8907=y
-CONFIG_MFD_STMPE=y
-CONFIG_MFD_PALMAS=y
-CONFIG_MFD_TPS65090=y
-CONFIG_MFD_TPS6586X=y
-CONFIG_MFD_TPS65910=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_AS3722=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_MAX8907=y
-CONFIG_REGULATOR_PALMAS=y
-CONFIG_REGULATOR_TPS51632=y
-CONFIG_REGULATOR_TPS62360=y
-CONFIG_REGULATOR_TPS65090=y
-CONFIG_REGULATOR_TPS6586X=y
-CONFIG_REGULATOR_TPS65910=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=y
-CONFIG_USB_GSPCA=y
-CONFIG_DRM=y
-CONFIG_DRM_NOUVEAU=m
-CONFIG_DRM_TEGRA=y
-CONFIG_DRM_PANEL_SIMPLE=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_HDA_TEGRA=y
-CONFIG_SND_HDA_INPUT_BEEP=y
-CONFIG_SND_HDA_PATCH_LOADER=y
-CONFIG_SND_HDA_CODEC_REALTEK=y
-CONFIG_SND_HDA_CODEC_HDMI=y
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_TEGRA=y
-CONFIG_SND_SOC_TEGRA_RT5640=y
-CONFIG_SND_SOC_TEGRA_WM8753=y
-CONFIG_SND_SOC_TEGRA_WM8903=y
-CONFIG_SND_SOC_TEGRA_WM9712=y
-CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
-CONFIG_SND_SOC_TEGRA_ALC5632=y
-CONFIG_SND_SOC_TEGRA_MAX98090=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_TEGRA=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_TEGRA=y
-CONFIG_USB_ACM=y
-CONFIG_USB_WDM=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK_MINORS=16
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_TEGRA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_LEDS_TRIGGER_TRANSIENT=y
-CONFIG_LEDS_TRIGGER_CAMERA=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AS3722=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_MAX8907=y
-CONFIG_RTC_DRV_PALMAS=y
-CONFIG_RTC_DRV_TPS6586X=y
-CONFIG_RTC_DRV_TPS65910=y
-CONFIG_RTC_DRV_EM3027=y
-CONFIG_RTC_DRV_TEGRA=y
-CONFIG_DMADEVICES=y
-CONFIG_TEGRA20_APB_DMA=y
-CONFIG_STAGING=y
-CONFIG_SENSORS_ISL29018=y
-CONFIG_SENSORS_ISL29028=y
-CONFIG_MFD_NVEC=y
-CONFIG_KEYBOARD_NVEC=y
-CONFIG_SERIO_NVEC_PS2=y
-CONFIG_NVEC_POWER=y
-CONFIG_NVEC_PAZ00=y
-CONFIG_TEGRA_IOMMU_GART=y
-CONFIG_TEGRA_IOMMU_SMMU=y
-CONFIG_MEMORY=y
-CONFIG_IIO=y
-CONFIG_AK8975=y
-CONFIG_PWM=y
-CONFIG_PWM_TEGRA=y
-CONFIG_PHY_TEGRA_XUSB=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_VM=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SG=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRC_CCITT=y
--
1.9.1
^ permalink raw reply related
* [PATCH v2 0/5] ARM: shmobile: R-Car Gen2: Allow booting secondary CPU cores in debug mode
From: Simon Horman @ 2016-12-06 12:39 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1480934381-32126-1-git-send-email-geert+renesas@glider.be>
On Mon, Dec 05, 2016 at 11:39:36AM +0100, Geert Uytterhoeven wrote:
> Hi Simon, Magnus,
>
> This patch series allows booting secondary CPU cores on R-Car Gen2 when
> hardware debug mode is enabled. In this mode, reset requests derived
> from power-shutoff to the AP-system CPU cores must be enabled before the
> AP-system CPU cores resume from power-shutoff for the first time.
> Else resume may fail, causing the system to hang during boot.
> Currently we avoid the hang by prohibiting booting secondary CPU cores
> when hardware debug mode is enabled (except on legacy r8a7790, see
> below).
>
> On all R-Car Gen2 SoCs, hardware debug mode is enabled by setting
> MD21=1. On both Koelsch and Lager, this is done by setting mode switch
> SW8-4 to OFF.
>
> Unfortunately the hang is not easy to reproduce: I only saw it (on
> Koelsch) during real cold boot (power off during the night), and even
> then it's not guaranteed to trigger. Pressing the reset button
> afterwards recovers the system, and a subsequent boot will succeed
> (incl. secondary CPU core boot).
>
> This series configures the reset requests as documented in the R-Car
> Gen2 datasheet, and removes the check for MD21 during secondary CPU
> bringup. It was inspired by CPU-specific patches in the BSP by
> Nakamura-san.
>
> And finally, we get rid of reading the Mode Monitoring register using
> hardcoded addresses in platform code!
>
> This series also fixes a minor regression introduced by adding the
> "renesas,apmu" enable-method on Lager, where secondary CPU cores are no
> longer available when hardware debug mode is enabled.
>
> This has been boot-tested on r8a7791/koelsch (both debug mode and normal
> mode), on r8a7790/lager, r8a7792/blanche, and r8a7793/gose (normal mode
> only), and on r8a7794/alt (normal mode UP only). Its core parts have
> been in renesas-drivers since renesas-drivers-2016-09-06-v4.8-rc5.
>
> Changes compared to v1:
> - Add Tested-by,
> - New patch "ARM: shmobile: rcar-gen2: Remove unused
> rcar_gen2_read_mode_pins()".
>
> This series is against renesas-devel-20161202-v4.9-rc7, with my
> "rcar-rst" branch merged in, which resulted in a merge conflict.
> The latter dependency is present in clk-next, and expected to land
> upstream in v4.10-rc1.
>
> For your convenience (and for conflict resolution), this series is also
> available in the topic/rcar-secondary-booting-in-debug-mode-v2 branch of
> my renesas-drivers git repository at
> git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git
>
> Thanks for applying!
Thanks, I have tentatively queued this up for v4.11.
I have pulled in the rcar-rst dependency with the expectation ttha
it will disappear when I rebase on v4.10-rc1 once it has been released.
^ permalink raw reply
* [GIT PULL] ARM: Xilinx Zynq DT changes for v4.10
From: Michal Simek @ 2016-12-06 12:40 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
please add these changes to your arm-soc repo.
It fixes dtc warnings, small coding style changes and add support for
Microzed.
Thanks,
Michal
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
https://github.com/Xilinx/linux-xlnx.git tags/zynqmp-dt-for-4.10
for you to fetch changes up to df2f3c48b9cd51e2612a1598342769d09d849f39:
arm: dts: zynq: Add MicroZed board support (2016-12-06 13:17:39 +0100)
----------------------------------------------------------------
arm: Xilinx Zynq dt patches for v4.10
- Remove skeleton.dtsi
- Fix DTC warnings
- Coding style changes
- Microzed support
----------------------------------------------------------------
Jagan Teki (1):
arm: dts: zynq: Add MicroZed board support
Michal Simek (3):
ARM: zynq: Remove skeleton.dtsi
ARM: zynq: Fix W=1 dtc 1.4 warnings
ARM: zynq: Fix pmu register description coding style
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/zynq-7000.dtsi | 10 +++++---
arch/arm/boot/dts/zynq-microzed.dts | 96
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/zynq-parallella.dts | 2 +-
arch/arm/boot/dts/zynq-zc702.dts | 2 +-
arch/arm/boot/dts/zynq-zc706.dts | 2 +-
arch/arm/boot/dts/zynq-zed.dts | 2 +-
arch/arm/boot/dts/zynq-zybo.dts | 2 +-
8 files changed, 108 insertions(+), 9 deletions(-)
create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161206/e3325f57/attachment-0001.sig>
^ permalink raw reply
* [PATCH v2 0/5] ARM: shmobile: R-Car Gen2: Allow booting secondary CPU cores in debug mode
From: Geert Uytterhoeven @ 2016-12-06 12:41 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161206123854.GA10942@verge.net.au>
Hi Simon,
On Tue, Dec 6, 2016 at 1:39 PM, Simon Horman <horms@verge.net.au> wrote:
> On Mon, Dec 05, 2016 at 11:39:36AM +0100, Geert Uytterhoeven wrote:
>> This patch series allows booting secondary CPU cores on R-Car Gen2 when
>> hardware debug mode is enabled. In this mode, reset requests derived
> Thanks, I have tentatively queued this up for v4.11.
>
> I have pulled in the rcar-rst dependency with the expectation ttha
> it will disappear when I rebase on v4.10-rc1 once it has been released.
Thank you very much!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Tearing down DMA transfer setup after DMA client has finished
From: Mason @ 2016-12-06 12:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161206051222.GQ6408@localhost>
On 06/12/2016 06:12, Vinod Koul wrote:
> On Tue, Nov 29, 2016 at 07:25:02PM +0100, Mason wrote:
>
>> Is there a way to write a driver within the existing framework?
>
> I think so, looking back at comments from Russell, I do tend to agree with
> that. Is there a specific reason why sbox can't be tied to alloc and free
> channels?
Here's a recap of the situation.
The "SBOX+MBUS" HW is used in several iterations of the tango SoC:
tango3
2 memory channels available
6 devices ("clients"?) may request an MBUS channel
tango4 (one more channel)
3 memory channels available
7 devices may request an MBUS channel :
NFC0, NFC1, SATA0, SATA1, memcpy, (IDE0, IDE1)
Notes:
The current NFC driver supports only one controller.
IDE is mostly obsolete at this point.
tango5 (SATA gets own dedicated MBUS channel pair)
3 memory channels available
5 devices may request an MBUS channel :
NFC0, NFC1, memcpy, (IDE0, IDE1)
If I understand the current DMA driver (written by Mans), client
drivers are instructed to use a specific channel in the DT, and
the DMA driver muxes access to that channel. The DMA driver
manages a per-channel queue of outstanding DMA transfer requests,
and a new transfer is started friom within the DMA ISR
(modulo the fact that the interrupt does not signal completion
of the transfer, as explained else-thread).
What you're proposing, Vinod, is to make a channel exclusive
to a driver, as long as the driver has not explicitly released
the channel, via dma_release_channel(), right?
Regards.
^ permalink raw reply
* [STLinux Kernel] [PATCH 2/3] serial: st-asc: Provide RTS functionality
From: Lee Jones @ 2016-12-06 12:45 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161206123131.GA15382@griffinp-ThinkPad-X1-Carbon-2nd>
On Tue, 06 Dec 2016, Peter Griffin wrote:
> On Mon, 05 Dec 2016, Patrice Chotard wrote:
> > On 12/02/2016 03:11 PM, Lee Jones wrote:
> > > Until this point, it has not been possible for serial applications
> > > to toggle the UART RTS line. This can be useful with certain
> > > configurations. For example, when using a Mezzanine on a Linaro
> > > 96board, RTS line is used to take the the on-board microcontroller
> >
> > typo "the the on"
> >
> > > in and out of reset.
> > >
> > > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> > > ---
> > > drivers/tty/serial/st-asc.c | 14 ++++++++++++++
> > > 1 file changed, 14 insertions(+)
> > >
> > > diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
> > > index 379e5bd..ce46898 100644
> > > --- a/drivers/tty/serial/st-asc.c
> > > +++ b/drivers/tty/serial/st-asc.c
> > > @@ -30,6 +30,7 @@
> > > #include <linux/of_platform.h>
> > > #include <linux/serial_core.h>
> > > #include <linux/clk.h>
> > > +#include <linux/gpio/consumer.h>
> > >
> > > #define DRIVER_NAME "st-asc"
> > > #define ASC_SERIAL_NAME "ttyAS"
> > > @@ -38,6 +39,7 @@
> > >
> > > struct asc_port {
> > > struct uart_port port;
> > > + struct gpio_desc *rts;
> > > struct clk *clk;
> > > unsigned int hw_flow_control:1;
> > > unsigned int force_m1:1;
> > > @@ -381,12 +383,16 @@ static unsigned int asc_tx_empty(struct uart_port *port)
> > >
> > > static void asc_set_mctrl(struct uart_port *port, unsigned int mctrl)
> > > {
> > > + struct asc_port *ascport = to_asc_port(port);
> > > +
> > > /*
> > > * This routine is used for seting signals of: DTR, DCD, CTS/RTS
> > > * We use ASC's hardware for CTS/RTS, so don't need any for that.
> > > * Some boards have DTR and DCD implemented using PIO pins,
> > > * code to do this should be hooked in here.
> > > */
> > > +
> > > + gpiod_set_value(ascport->rts, mctrl & TIOCM_RTS);
>
> This now puts the code and the comment above out of sync with each
> other.
>
> However just checking the stih410 datasheet and I don't think this patch
> to control RTS via a GPIO is required anyway.
>
> The correct way of handling this is to add UART10_RTS and UART10_CTS pins
> to the pinctrl_serial0 group so they are properly configured for their cts/rts
> alternate function. Once the pins are correctly configured, the IP block should
> control the signals correctly like the comment says.
That was the first thing I tried. It didn't work.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply
* [GIT PULL] ARM: Xilinx Zynq SOC changes for v4.10
From: Michal Simek @ 2016-12-06 12:46 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
please pull this fix to your tree.
Thanks,
Michal
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
https://github.com/Xilinx/linux-xlnx.git tags/zynq-soc-for-4.10
for you to fetch changes up to 7a3cc2a7b2c723aa552028f4e66841cec183756d:
ARM: zynq: Reserve correct amount of non-DMA RAM (2016-11-14 16:07:58
+0100)
----------------------------------------------------------------
arm: Xilinx Zynq patches for v4.10
- Fix dma issue
----------------------------------------------------------------
Kyle Roeschley (1):
ARM: zynq: Reserve correct amount of non-DMA RAM
arch/arm/mach-zynq/common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP SoCs
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161206/773ac815/attachment-0001.sig>
^ permalink raw reply
* [STLinux Kernel] [PATCH 2/3] serial: st-asc: Provide RTS functionality
From: Lee Jones @ 2016-12-06 12:48 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161206124543.GC25385@dell.home>
On Tue, 06 Dec 2016, Lee Jones wrote:
> On Tue, 06 Dec 2016, Peter Griffin wrote:
> > On Mon, 05 Dec 2016, Patrice Chotard wrote:
> > > On 12/02/2016 03:11 PM, Lee Jones wrote:
> > > > Until this point, it has not been possible for serial applications
> > > > to toggle the UART RTS line. This can be useful with certain
> > > > configurations. For example, when using a Mezzanine on a Linaro
> > > > 96board, RTS line is used to take the the on-board microcontroller
> > >
> > > typo "the the on"
> > >
> > > > in and out of reset.
> > > >
> > > > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> > > > ---
> > > > drivers/tty/serial/st-asc.c | 14 ++++++++++++++
> > > > 1 file changed, 14 insertions(+)
> > > >
> > > > diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
> > > > index 379e5bd..ce46898 100644
> > > > --- a/drivers/tty/serial/st-asc.c
> > > > +++ b/drivers/tty/serial/st-asc.c
> > > > @@ -30,6 +30,7 @@
> > > > #include <linux/of_platform.h>
> > > > #include <linux/serial_core.h>
> > > > #include <linux/clk.h>
> > > > +#include <linux/gpio/consumer.h>
> > > >
> > > > #define DRIVER_NAME "st-asc"
> > > > #define ASC_SERIAL_NAME "ttyAS"
> > > > @@ -38,6 +39,7 @@
> > > >
> > > > struct asc_port {
> > > > struct uart_port port;
> > > > + struct gpio_desc *rts;
> > > > struct clk *clk;
> > > > unsigned int hw_flow_control:1;
> > > > unsigned int force_m1:1;
> > > > @@ -381,12 +383,16 @@ static unsigned int asc_tx_empty(struct uart_port *port)
> > > >
> > > > static void asc_set_mctrl(struct uart_port *port, unsigned int mctrl)
> > > > {
> > > > + struct asc_port *ascport = to_asc_port(port);
> > > > +
> > > > /*
> > > > * This routine is used for seting signals of: DTR, DCD, CTS/RTS
> > > > * We use ASC's hardware for CTS/RTS, so don't need any for that.
> > > > * Some boards have DTR and DCD implemented using PIO pins,
> > > > * code to do this should be hooked in here.
> > > > */
> > > > +
> > > > + gpiod_set_value(ascport->rts, mctrl & TIOCM_RTS);
> >
> > This now puts the code and the comment above out of sync with each
> > other.
> >
> > However just checking the stih410 datasheet and I don't think this patch
> > to control RTS via a GPIO is required anyway.
> >
> > The correct way of handling this is to add UART10_RTS and UART10_CTS pins
> > to the pinctrl_serial0 group so they are properly configured for their cts/rts
> > alternate function. Once the pins are correctly configured, the IP block should
> > control the signals correctly like the comment says.
>
> That was the first thing I tried. It didn't work.
cts = <&pio17 2 ALT1 IN>;
rts = <&pio17 3 ALT1 OUT>;
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply
* [GIT PULL] ARM: Xilinx Zynq DT changes for v4.10
From: Michal Simek @ 2016-12-06 12:48 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <0eeda910-d585-d532-96c6-5c0cc634627c@monstr.eu>
Hi,
On 6.12.2016 13:40, Michal Simek wrote:
> Hi,
>
> please add these changes to your arm-soc repo.
> It fixes dtc warnings, small coding style changes and add support for
> Microzed.
>
> Thanks,
> Michal
>
> The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
>
> Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
>
> are available in the git repository at:
>
> https://github.com/Xilinx/linux-xlnx.git tags/zynqmp-dt-for-4.10
please ignore this one - patches are good but I used incorrect tag name
here because this is for zynq not for zynqmp.
Sorry for that will send v2.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP SoCs
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161206/bc941f7b/attachment.sig>
^ permalink raw reply
* [GIT PULL v2] ARM: Xilinx Zynq DT changes for v4.10
From: Michal Simek @ 2016-12-06 12:51 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
please add these changes to your arm-soc repo.
It fixes dtc warnings, small coding style changes and add support for
Microzed.
Thanks,
Michal
---
v2: Use correct zynq-dt-for-4.10 tag instead of zynqmp-dt-for-4.10.
The following changes since commit 1001354ca34179f3db924eb66672442a173147dc:
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
https://github.com/Xilinx/linux-xlnx.git tags/zynq-dt-for-4.10
for you to fetch changes up to df2f3c48b9cd51e2612a1598342769d09d849f39:
arm: dts: zynq: Add MicroZed board support (2016-12-06 13:17:39 +0100)
----------------------------------------------------------------
arm: Xilinx Zynq dt patches for v4.10
- Remove skeleton.dtsi
- Fix DTC warnings
- Coding style changes
- Microzed support
----------------------------------------------------------------
Jagan Teki (1):
arm: dts: zynq: Add MicroZed board support
Michal Simek (3):
ARM: zynq: Remove skeleton.dtsi
ARM: zynq: Fix W=1 dtc 1.4 warnings
ARM: zynq: Fix pmu register description coding style
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/zynq-7000.dtsi | 10 +++++---
arch/arm/boot/dts/zynq-microzed.dts | 96
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/zynq-parallella.dts | 2 +-
arch/arm/boot/dts/zynq-zc702.dts | 2 +-
arch/arm/boot/dts/zynq-zc706.dts | 2 +-
arch/arm/boot/dts/zynq-zed.dts | 2 +-
arch/arm/boot/dts/zynq-zybo.dts | 2 +-
8 files changed, 108 insertions(+), 9 deletions(-)
create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP SoCs
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161206/76407ade/attachment.sig>
^ permalink raw reply
* [PATCH v3 7/7] ARM: dts: stm32: add stm32 general purpose timer driver in DT
From: Lee Jones @ 2016-12-06 12:54 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <8f881cf7-ba63-315f-b852-71869ad480f3@st.com>
On Tue, 06 Dec 2016, Alexandre Torgue wrote:
> On 12/06/2016 10:48 AM, Lee Jones wrote:
> > On Mon, 05 Dec 2016, Alexandre Torgue wrote:
> > > On 12/02/2016 02:22 PM, Lee Jones wrote:
> > > > On Fri, 02 Dec 2016, Benjamin Gaignard wrote:
> > > >
> > > > > Add general purpose timers and it sub-nodes into DT for stm32f4.
> > > > > Define and enable pwm1 and pwm3 for stm32f469 discovery board
> > > > >
> > > > > version 3:
> > > > > - use "st,stm32-timer-trigger" in DT
> > > > >
> > > > > version 2:
> > > > > - use parameters to describe hardware capabilities
> > > > > - do not use references for pwm and iio timer subnodes
> > > > >
> > > > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
> > > > > ---
> > > > > arch/arm/boot/dts/stm32f429.dtsi | 333 +++++++++++++++++++++++++++++++++-
> > > > > arch/arm/boot/dts/stm32f469-disco.dts | 28 +++
> > > > > 2 files changed, 360 insertions(+), 1 deletion(-)
> >
> > [...]
> >
> > If you're only commenting on a little piece of the patch, it's always
> > a good idea to trim the rest.
> >
> > > > > diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
> > > > > index 8a163d7..df4ca7e 100644
> > > > > --- a/arch/arm/boot/dts/stm32f469-disco.dts
> > > > > +++ b/arch/arm/boot/dts/stm32f469-disco.dts
> > > > > @@ -81,3 +81,31 @@
> > > > > &usart3 {
> > > > > status = "okay";
> > > > > };
> > > > > +
> > > > > +&gptimer1 {
> > > > > + status = "okay";
> > > > > +
> > > > > + pwm1 at 0 {
> > > > > + pinctrl-0 = <&pwm1_pins>;
> > > > > + pinctrl-names = "default";
> > > > > + status = "okay";
> > > > > + };
> > > > > +
> > > > > + timer1 at 0 {
> > > > > + status = "okay";
> > > > > + };
> > > > > +};
> > > >
> > > > This is a much *better* format than before.
> > > >
> > > > I still don't like the '&' syntax though.
> > >
> > > Please keep "&" format to match with existing nodes.
> >
> > Right. I wasn't suggesting that he differs from the current format in
> > *this* set. I am suggesting that we change the format in a subsequent
> > set though.
>
> Why change? Looking at Linux ARM kernel patchwork, new DT board file
> contains this format. Did you already discuss with Arnd or Olof about it ?
Because the syntax is horrible. It removes any indication of
hierarchy and insists all nodes include labels that would otherwise be
unnecessary.
The syntax is approved, so there is no issue with Arnd/Olof, nor the
DT Maintainers. The decision is left to the sub-arch maintainer to
choose to use it or not. My vote (which doesn't really count for
anything in this scenario) is to not use it for the aforementioned
reasons.
> > > > > +&gptimer3 {
> > > > > + status = "okay";
> > > > > +
> > > > > + pwm3 at 0 {
> > > > > + pinctrl-0 = <&pwm3_pins>;
> > > > > + pinctrl-names = "default";
> > > > > + status = "okay";
> > > > > + };
> > > > > +
> > > > > + timer3 at 0 {
> > > > > + status = "okay";
> > > > > + };
> > > > > +};
> > > >
> >
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply
* [PATCH v4 7/7] ARM: dts: stm32: add STM32 General Purpose Timer driver in DT
From: Lee Jones @ 2016-12-06 12:57 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1481027929-13704-8-git-send-email-benjamin.gaignard@st.com>
On Tue, 06 Dec 2016, Benjamin Gaignard wrote:
> Add General Purpose Timers and it sub-nodes into DT for stm32f4.
> Define and enable pwm1 and pwm3 for stm32f469 discovery board
>
> version 4:
> - remove unwanted indexing in pwm@ and timer@ node name
> - use "reg" instead of additional parameters to set timer
> configuration
>
> version 3:
> - use "st,stm32-timer-trigger" in DT
>
> version 2:
> - use parameters to describe hardware capabilities
> - do not use references for pwm and iio timer subnodes
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
> ---
> arch/arm/boot/dts/stm32f429.dtsi | 276 +++++++++++++++++++++++++++++++++-
> arch/arm/boot/dts/stm32f469-disco.dts | 28 ++++
> 2 files changed, 303 insertions(+), 1 deletion(-)
This now looks really neat.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply
* [PATCH v4 1/7] MFD: add bindings for STM32 General Purpose Timer driver
From: Lee Jones @ 2016-12-06 13:00 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1481027929-13704-2-git-send-email-benjamin.gaignard@st.com>
On Tue, 06 Dec 2016, Benjamin Gaignard wrote:
> Add bindings information for STM32 General Purpose Timer
>
> version 2:
> - rename stm32-mfd-timer to stm32-gptimer
> - only keep one compatible string
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
> ---
> .../bindings/mfd/stm32-general-purpose-timer.txt | 39 ++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt b/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt
> new file mode 100644
> index 0000000..e92c8be
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt
> @@ -0,0 +1,39 @@
> +STM32 General Purpose Timer driver bindings
> +
> +Required parameters:
> +- compatible: must be "st,stm32-gptimer"
> +
> +- reg: Physical base address and length of the controller's
> + registers.
> +- clock-names: Set to "clk_int".
> +- clocks: Phandle to the clock used by the timer module.
> + For Clk properties, please refer to ../clock/clock-bindings.txt
> +
> +Optional parameters:
> +- resets: Phandle to the parent reset controller.
> + See ../reset/st,stm32-rcc.txt
> +
> +Optional subnodes:
> +- pwm: See ../pwm/pwm-stm32.txt
> +- timer: See ../iio/timer/stm32-timer-trigger.txt
> +
> +Example:
> + gptimer at 40010000 {
I'm not going to push too hard, but I still thing "advanced-control"
would suit better, since this is not *just* a timer. In fact, the
parent device (the MFD) doesn't have any timer functionality. That's
what "timer at 0" does.
The IP is called "Advanced Control" in the datasheet, no?
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-gptimer";
> + reg = <0x40010000 0x400>;
> + clocks = <&rcc 0 160>;
> + clock-names = "clk_int";
> +
> + pwm at 0 {
> + compatible = "st,stm32-pwm";
> + pinctrl-0 = <&pwm1_pins>;
> + pinctrl-names = "default";
> + };
> +
> + timer at 0 {
> + compatible = "st,stm32-timer-trigger";
> + reg = <0>;
> + };
> + };
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply
* [PATCH v3 1/2] ARM: dts: da850-lcdk: add the dumb-vga-dac node
From: Bartosz Golaszewski @ 2016-12-06 13:02 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <a2159347-1cd7-18b1-626a-fe6a272ba85c@ti.com>
2016-12-05 13:49 GMT+01:00 Tomi Valkeinen <tomi.valkeinen@ti.com>:
> On 29/11/16 13:57, Bartosz Golaszewski wrote:
>> Add the dumb-vga-dac node to the board DT together with corresponding
>> ports and vga connector. This allows to retrieve the edid info from
>> the display automatically.
>>
>
> It's a bit difficult to follow this as there's been so many patches
> going around. But I take the above is the LCDC node in the base da850
> dtsi file? In that case, what is the display_in supposed to present?
> It's the first node in the "display chain", so it has no input.
>
> Also, don't touch da850.dtsi here, just add the "ports" node in the
> da850-lcdk.dts file.
>
> If the da850.dtsi has not been merged yet, I'd change the name of the
> lcdc node to something else than "display". It's rather vague. If it's
> named "lcdc", reading da850-lcdk.dts becomes much easier, as you'll
> refer to "lcdc".
>
The node is already in Sekhar's branch.
Thanks,
Bartosz
^ permalink raw reply
* [STLinux Kernel] [PATCH 2/3] serial: st-asc: Provide RTS functionality
From: Peter Griffin @ 2016-12-06 13:03 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161206124808.GD25385@dell.home>
Hi Lee,
On Tue, 06 Dec 2016, Lee Jones wrote:
> On Tue, 06 Dec 2016, Lee Jones wrote:
>
> > On Tue, 06 Dec 2016, Peter Griffin wrote:
> > > On Mon, 05 Dec 2016, Patrice Chotard wrote:
> > > > On 12/02/2016 03:11 PM, Lee Jones wrote:
> > > > > Until this point, it has not been possible for serial applications
> > > > > to toggle the UART RTS line. This can be useful with certain
> > > > > configurations. For example, when using a Mezzanine on a Linaro
> > > > > 96board, RTS line is used to take the the on-board microcontroller
> > > >
> > > > typo "the the on"
> > > >
> > > > > in and out of reset.
> > > > >
> > > > > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> > > > > ---
> > > > > drivers/tty/serial/st-asc.c | 14 ++++++++++++++
> > > > > 1 file changed, 14 insertions(+)
> > > > >
> > > > > diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
> > > > > index 379e5bd..ce46898 100644
> > > > > --- a/drivers/tty/serial/st-asc.c
> > > > > +++ b/drivers/tty/serial/st-asc.c
> > > > > @@ -30,6 +30,7 @@
> > > > > #include <linux/of_platform.h>
> > > > > #include <linux/serial_core.h>
> > > > > #include <linux/clk.h>
> > > > > +#include <linux/gpio/consumer.h>
> > > > >
> > > > > #define DRIVER_NAME "st-asc"
> > > > > #define ASC_SERIAL_NAME "ttyAS"
> > > > > @@ -38,6 +39,7 @@
> > > > >
> > > > > struct asc_port {
> > > > > struct uart_port port;
> > > > > + struct gpio_desc *rts;
> > > > > struct clk *clk;
> > > > > unsigned int hw_flow_control:1;
> > > > > unsigned int force_m1:1;
> > > > > @@ -381,12 +383,16 @@ static unsigned int asc_tx_empty(struct uart_port *port)
> > > > >
> > > > > static void asc_set_mctrl(struct uart_port *port, unsigned int mctrl)
> > > > > {
> > > > > + struct asc_port *ascport = to_asc_port(port);
> > > > > +
> > > > > /*
> > > > > * This routine is used for seting signals of: DTR, DCD, CTS/RTS
> > > > > * We use ASC's hardware for CTS/RTS, so don't need any for that.
> > > > > * Some boards have DTR and DCD implemented using PIO pins,
> > > > > * code to do this should be hooked in here.
> > > > > */
> > > > > +
> > > > > + gpiod_set_value(ascport->rts, mctrl & TIOCM_RTS);
> > >
> > > This now puts the code and the comment above out of sync with each
> > > other.
> > >
> > > However just checking the stih410 datasheet and I don't think this patch
> > > to control RTS via a GPIO is required anyway.
> > >
> > > The correct way of handling this is to add UART10_RTS and UART10_CTS pins
> > > to the pinctrl_serial0 group so they are properly configured for their cts/rts
> > > alternate function. Once the pins are correctly configured, the IP block should
> > > control the signals correctly like the comment says.
> >
> > That was the first thing I tried. It didn't work.
>
> cts = <&pio17 2 ALT1 IN>;
> rts = <&pio17 3 ALT1 OUT>;
>
That implies that either some additional configuration of the IP is required in
st-asc to get the IP to control those signals or that there is a bug in the
ST pinctrl driver and the correct settings aren't being applied.
regards,
Peter.
^ permalink raw reply
* [PATCH v4 2/7] MFD: add STM32 General Purpose Timer driver
From: Lee Jones @ 2016-12-06 13:07 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1481027929-13704-3-git-send-email-benjamin.gaignard@st.com>
This is really starting to come together.
Couple of nits to tend to and you'll be all set.
> This hardware block could at used at same time for PWM generation
> and IIO timers.
> PWM and IIO timer configuration are mixed in the same registers
> so we need a multi fonction driver to be able to share those registers.
>
> version 4:
> - add a function to detect Auto Reload Register (ARR) size
> - rename the structure shared with other drivers
>
> version 2:
> - rename driver "stm32-gptimer" to be align with SoC documentation
> - only keep one compatible
> - use of_platform_populate() instead of devm_mfd_add_devices()
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
> ---
> drivers/mfd/Kconfig | 11 ++++++
> drivers/mfd/Makefile | 2 +
> drivers/mfd/stm32-gptimer.c | 82 +++++++++++++++++++++++++++++++++++++++
This is not a timer.
> include/linux/mfd/stm32-gptimer.h | 63 ++++++++++++++++++++++++++++++
> 4 files changed, 158 insertions(+)
> create mode 100644 drivers/mfd/stm32-gptimer.c
> create mode 100644 include/linux/mfd/stm32-gptimer.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index c6df644..a00f6b3 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1607,6 +1607,17 @@ config MFD_STW481X
> in various ST Microelectronics and ST-Ericsson embedded
> Nomadik series.
>
> +config MFD_STM32_GP_TIMER
> + tristate "Support for STM32 General Purpose Timer"
... but it's not though is it. This is the parent device whose
children are a PWM and a Timer.
> + select MFD_CORE
> + select REGMAP
> + depends on ARCH_STM32 || COMPILE_TEST
> + depends on OF
Shouldn't this be:
depends on (ARCH_STM32 && OF) || COMPILE_TEST
> + help
> + Select this option to enable STM32 general purpose timer
> + driver used for PWM and IIO Timer. This driver allow to
> + share the registers between the others drivers.
> +
> menu "Multimedia Capabilities Port drivers"
> depends on ARCH_SA1100
>
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 9834e66..86353b9 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -211,3 +211,5 @@ obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
>
> obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
> +
> +obj-$(CONFIG_MFD_STM32_GP_TIMER) += stm32-gptimer.o
> diff --git a/drivers/mfd/stm32-gptimer.c b/drivers/mfd/stm32-gptimer.c
> new file mode 100644
> index 0000000..6747fcb
> --- /dev/null
> +++ b/drivers/mfd/stm32-gptimer.c
> @@ -0,0 +1,82 @@
> +/*
> + * Copyright (C) STMicroelectronics 2016
> + *
> + * Author: Benjamin Gaignard <benjamin.gaignard@st.com>
Nit: '\n' here.
> + * License terms: GNU General Public License (GPL), version 2
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/reset.h>
> +
> +#include <linux/mfd/stm32-gptimer.h>
Nit: Why does this need to be separate?
> +static const struct regmap_config stm32_gptimer_regmap_cfg = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = sizeof(u32),
> + .max_register = 0x400,
> +};
> +
> +static u32 stm32_gptimer_get_arr_size(struct regmap *regmap)
> +{
> + u32 max_arr;
> +
> + /* Only the available bits will be written so when readback
> + * we get the maximum value of auto reload register
> + */
Incorrect format for a multi-line comment in Linux.
> + regmap_write(regmap, TIM_ARR, ~0L);
> + regmap_read(regmap, TIM_ARR, &max_arr);
> + regmap_write(regmap, TIM_ARR, 0x0);
> +
> + return max_arr;
> +}
> +
> +static int stm32_gptimer_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct stm32_gptimer *ddata;
> + struct resource *res;
> + void __iomem *mmio;
> +
> + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
> + if (!ddata)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + mmio = devm_ioremap_resource(dev, res);
> + if (IS_ERR(mmio))
> + return PTR_ERR(mmio);
> +
> + ddata->regmap = devm_regmap_init_mmio_clk(dev, "clk_int", mmio,
> + &stm32_gptimer_regmap_cfg);
> + if (IS_ERR(ddata->regmap))
> + return PTR_ERR(ddata->regmap);
> +
> + ddata->clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(ddata->clk))
> + return PTR_ERR(ddata->clk);
> +
> + ddata->max_arr = stm32_gptimer_get_arr_size(ddata->regmap);
Why don't you pass in ddata, then use regmap and populate max_arr
inside the function. Then make stm32_gptimer_get_arr_size() void.
> + platform_set_drvdata(pdev, ddata);
> +
> + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
> +}
> +
> +static const struct of_device_id stm32_gptimer_of_match[] = {
> + { .compatible = "st,stm32-gptimer" },
> +};
> +MODULE_DEVICE_TABLE(of, stm32_gptimer_of_match);
> +
> +static struct platform_driver stm32_gptimer_driver = {
> + .probe = stm32_gptimer_probe,
> + .driver = {
> + .name = "stm32-gptimer",
> + .of_match_table = stm32_gptimer_of_match,
> + },
> +};
> +module_platform_driver(stm32_gptimer_driver);
> +
> +MODULE_DESCRIPTION("STMicroelectronics STM32 General Purpose Timer");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/stm32-gptimer.h b/include/linux/mfd/stm32-gptimer.h
> new file mode 100644
> index 0000000..bf0a595
> --- /dev/null
> +++ b/include/linux/mfd/stm32-gptimer.h
> @@ -0,0 +1,63 @@
> +/*
> + * Copyright (C) STMicroelectronics 2016
> + *
> + * Author: Benjamin Gaignard <benjamin.gaignard@st.com>
Nit: '\n'
> + * License terms: GNU General Public License (GPL), version 2
> + */
> +
> +#ifndef _LINUX_STM32_GPTIMER_H_
> +#define _LINUX_STM32_GPTIMER_H_
> +
> +#include <linux/clk.h>
> +#include <linux/regmap.h>
> +
> +#define TIM_CR1 0x00 /* Control Register 1 */
> +#define TIM_CR2 0x04 /* Control Register 2 */
> +#define TIM_SMCR 0x08 /* Slave mode control reg */
> +#define TIM_DIER 0x0C /* DMA/interrupt register */
> +#define TIM_SR 0x10 /* Status register */
> +#define TIM_EGR 0x14 /* Event Generation Reg */
> +#define TIM_CCMR1 0x18 /* Capt/Comp 1 Mode Reg */
> +#define TIM_CCMR2 0x1C /* Capt/Comp 2 Mode Reg */
> +#define TIM_CCER 0x20 /* Capt/Comp Enable Reg */
> +#define TIM_PSC 0x28 /* Prescaler */
> +#define TIM_ARR 0x2c /* Auto-Reload Register */
> +#define TIM_CCR1 0x34 /* Capt/Comp Register 1 */
> +#define TIM_CCR2 0x38 /* Capt/Comp Register 2 */
> +#define TIM_CCR3 0x3C /* Capt/Comp Register 3 */
> +#define TIM_CCR4 0x40 /* Capt/Comp Register 4 */
> +#define TIM_BDTR 0x44 /* Break and Dead-Time Reg */
> +
> +#define TIM_CR1_CEN BIT(0) /* Counter Enable */
> +#define TIM_CR1_ARPE BIT(7) /* Auto-reload Preload Ena */
> +#define TIM_CR2_MMS (BIT(4) | BIT(5) | BIT(6)) /* Master mode selection */
> +#define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */
> +#define TIM_SMCR_TS (BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */
> +#define TIM_DIER_UIE BIT(0) /* Update interrupt */
> +#define TIM_SR_UIF BIT(0) /* Update interrupt flag */
> +#define TIM_EGR_UG BIT(0) /* Update Generation */
> +#define TIM_CCMR_PE BIT(3) /* Channel Preload Enable */
> +#define TIM_CCMR_M1 (BIT(6) | BIT(5)) /* Channel PWM Mode 1 */
> +#define TIM_CCER_CC1E BIT(0) /* Capt/Comp 1 out Ena */
> +#define TIM_CCER_CC1P BIT(1) /* Capt/Comp 1 Polarity */
> +#define TIM_CCER_CC1NE BIT(2) /* Capt/Comp 1N out Ena */
> +#define TIM_CCER_CC1NP BIT(3) /* Capt/Comp 1N Polarity */
> +#define TIM_CCER_CC2E BIT(4) /* Capt/Comp 2 out Ena */
> +#define TIM_CCER_CC3E BIT(8) /* Capt/Comp 3 out Ena */
> +#define TIM_CCER_CC4E BIT(12) /* Capt/Comp 4 out Ena */
> +#define TIM_CCER_CCXE (BIT(0) | BIT(4) | BIT(8) | BIT(12))
> +#define TIM_BDTR_BKE BIT(12) /* Break input enable */
> +#define TIM_BDTR_BKP BIT(13) /* Break input polarity */
> +#define TIM_BDTR_AOE BIT(14) /* Automatic Output Enable */
> +#define TIM_BDTR_MOE BIT(15) /* Main Output Enable */
> +
> +#define MAX_TIM_PSC 0xFFFF
> +#define TIM_CR2_MMS_SHIFT 4
> +#define TIM_SMCR_TS_SHIFT 4
> +
> +struct stm32_gptimer {
> + struct clk *clk;
> + struct regmap *regmap;
> + u32 max_arr;
> +};
> +#endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply
* [PATCH v3] KVM: arm/arm64: Access CNTHCTL_EL2 bit fields correctly
From: Marc Zyngier @ 2016-12-06 13:09 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161206121617.GB3681@cbox>
On 06/12/16 12:16, Christoffer Dall wrote:
> On Tue, Dec 06, 2016 at 01:12:21PM +0100, Christoffer Dall wrote:
>> On Tue, Dec 06, 2016 at 11:17:40AM +0000, Marc Zyngier wrote:
>>> On 01/12/16 19:32, Jintack Lim wrote:
>>>> Current KVM world switch code is unintentionally setting wrong bits to
>>>> CNTHCTL_EL2 when E2H == 1, which may allow guest OS to access physical
>>>> timer. Bit positions of CNTHCTL_EL2 are changing depending on
>>>> HCR_EL2.E2H bit. EL1PCEN and EL1PCTEN are 1st and 0th bits when E2H is
>>>> not set, but they are 11th and 10th bits respectively when E2H is set.
>>>>
>>>> In fact, on VHE we only need to set those bits once, not for every world
>>>> switch. This is because the host kernel runs in EL2 with HCR_EL2.TGE ==
>>>> 1, which makes those bits have no effect for the host kernel execution.
>>>> So we just set those bits once for guests, and that's it.
>>>>
>>>> Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
>>>> ---
>>>> v2->v3:
>>>> - Perform the initialization including CPU hotplug case.
>>>> - Move has_vhe() to asm/virt.h
>>>>
>>>> v1->v2:
>>>> - Skip configuring cnthctl_el2 in world switch path on VHE system.
>>>> - Write patch based on linux-next.
>>>> ---
>>>> arch/arm/include/asm/virt.h | 5 +++++
>>>> arch/arm/kvm/arm.c | 3 +++
>>>> arch/arm64/include/asm/virt.h | 10 ++++++++++
>>>> include/kvm/arm_arch_timer.h | 1 +
>>>> virt/kvm/arm/arch_timer.c | 23 +++++++++++++++++++++++
>>>> virt/kvm/arm/hyp/timer-sr.c | 33 +++++++++++++++++++++------------
>>>> 6 files changed, 63 insertions(+), 12 deletions(-)
>>>>
>>>> diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h
>>>> index a2e75b8..6dae195 100644
>>>> --- a/arch/arm/include/asm/virt.h
>>>> +++ b/arch/arm/include/asm/virt.h
>>>> @@ -80,6 +80,11 @@ static inline bool is_kernel_in_hyp_mode(void)
>>>> return false;
>>>> }
>>>>
>>>> +static inline bool has_vhe(void)
>>>> +{
>>>> + return false;
>>>> +}
>>>> +
>>>> /* The section containing the hypervisor idmap text */
>>>> extern char __hyp_idmap_text_start[];
>>>> extern char __hyp_idmap_text_end[];
>>>> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
>>>> index 8f92efa..13e54e8 100644
>>>> --- a/arch/arm/kvm/arm.c
>>>> +++ b/arch/arm/kvm/arm.c
>>>> @@ -1099,6 +1099,9 @@ static void cpu_init_hyp_mode(void *dummy)
>>>> __cpu_init_hyp_mode(pgd_ptr, hyp_stack_ptr, vector_ptr);
>>>> __cpu_init_stage2();
>>>>
>>>> + if (is_kernel_in_hyp_mode())
>>>> + kvm_timer_init_vhe();
>>>> +
>>>> kvm_arm_init_debug();
>>>> }
>>>>
>>>> diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
>>>> index fea1073..b043cfd 100644
>>>> --- a/arch/arm64/include/asm/virt.h
>>>> +++ b/arch/arm64/include/asm/virt.h
>>>> @@ -47,6 +47,7 @@
>>>> #include <asm/ptrace.h>
>>>> #include <asm/sections.h>
>>>> #include <asm/sysreg.h>
>>>> +#include <asm/cpufeature.h>
>>>>
>>>> /*
>>>> * __boot_cpu_mode records what mode CPUs were booted in.
>>>> @@ -80,6 +81,15 @@ static inline bool is_kernel_in_hyp_mode(void)
>>>> return read_sysreg(CurrentEL) == CurrentEL_EL2;
>>>> }
>>>>
>>>> +static inline bool has_vhe(void)
>>>> +{
>>>> +#ifdef CONFIG_ARM64_VHE
>>>
>>> Is there a particular reason why this should be guarded by a #ifdef? All
>>> the symbols should always be available, and since this is a static key,
>>> the overhead should be really insignificant (provided that you use a
>>> non-prehistoric compiler...).
>>>
>>
>> Isn't this code called from a file shared between 32-bit arm and arm64?
>> Does the cpus_have_const_cap work on ARM64?
>
> Duh, I meant on 32-bit arm of course.
Well, this is a pure 64bit file - 32bit has the canonical implementation
that always returns false. So I can't really see how this can ever break
32bit. Unless my lack of sleep is really showing, and I'm missing
something terribly obvious?
Thanks,
M.
--
Jazz is not dead. It just smells funny...
^ permalink raw reply
* [PATCH v4 0/2] ARM: dts: da850: tilcdc related DT changes
From: Bartosz Golaszewski @ 2016-12-06 13:13 UTC (permalink / raw)
To: linux-arm-kernel
This series contains the last DT changes required for LCDC support
on da850-lcdk. The first one adds the dumb-vga-dac nodes, the second
limits the maximum pixel clock rate.
v1 -> v2:
- drop patch 3/3 (already merged)
- use max-pixelclock instead of max-bandwidth for display mode limiting
v2 -> v3:
- make the commit message in patch [2/2] more detailed
- move the max-pixelclock property to da850.dtsi as the limit
affects all da850-based boards
v3 -> v4:
- remove the input port from the display node
- move the display ports node to da850-lcdk.dts
- rename the vga_bridge node to vga-bridge
- move the LCDC pins to the LCDC node (from the vga bridge node)
Bartosz Golaszewski (2):
ARM: dts: da850-lcdk: add the dumb-vga-dac node
ARM: dts: da850: specify the maximum pixel clock rate for tilcdc
arch/arm/boot/dts/da850-lcdk.dts | 69 ++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/da850.dtsi | 1 +
2 files changed, 70 insertions(+)
--
2.9.3
^ permalink raw reply
* [PATCH v4 1/2] ARM: dts: da850-lcdk: add the dumb-vga-dac node
From: Bartosz Golaszewski @ 2016-12-06 13:13 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1481030026-7329-1-git-send-email-bgolaszewski@baylibre.com>
Add the dumb-vga-dac node to the board DT together with corresponding
ports and vga connector. This allows to retrieve the edid info from
the display automatically.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/boot/dts/da850-lcdk.dts | 69 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index afcb482..ca437c1 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -51,6 +51,51 @@
system-clock-frequency = <24576000>;
};
};
+
+ vga-bridge {
+ compatible = "dumb-vga-dac";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ vga_bridge_in: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&display_out_vga>;
+ };
+ };
+
+ port at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ vga_bridge_out: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&vga_con_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ ddc-i2c-bus = <&i2c0>;
+
+ port {
+ vga_con_in: endpoint {
+ remote-endpoint = <&vga_bridge_out>;
+ };
+ };
+ };
};
&pmx_core {
@@ -236,3 +281,27 @@
&memctrl {
status = "okay";
};
+
+&display {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display_out: port at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+};
+
+&display_out {
+ display_out_vga: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&vga_bridge_in>;
+ };
+};
--
2.9.3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox