* [PATCH v3 3/3] drm: zte: add overlay plane support
From: Shawn Guo @ 2016-12-29 2:37 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1482979048-32037-1-git-send-email-shawnguo@kernel.org>
From: Shawn Guo <shawn.guo@linaro.org>
It enables VOU VL (Video Layer) to support overlay plane with scaling
function. VL0 has some quirks on scaling support. We choose to skip it
and only adds VL1 and VL2 into DRM core for now.
Function zx_plane_atomic_disable() gets moved around with no changes to
save a forward declaration.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
drivers/gpu/drm/zte/zx_plane.c | 311 +++++++++++++++++++++++++++++++++---
drivers/gpu/drm/zte/zx_plane_regs.h | 51 ++++++
drivers/gpu/drm/zte/zx_vou.c | 80 +++++++++-
drivers/gpu/drm/zte/zx_vou_regs.h | 18 +++
4 files changed, 431 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/zte/zx_plane.c b/drivers/gpu/drm/zte/zx_plane.c
index 5445eebf830f..c5ac42647735 100644
--- a/drivers/gpu/drm/zte/zx_plane.c
+++ b/drivers/gpu/drm/zte/zx_plane.c
@@ -30,6 +30,275 @@
DRM_FORMAT_ARGB4444,
};
+static const uint32_t vl_formats[] = {
+ DRM_FORMAT_NV12, /* Semi-planar YUV420 */
+ DRM_FORMAT_YUV420, /* Planar YUV420 */
+ DRM_FORMAT_YUYV, /* Packed YUV422 */
+ DRM_FORMAT_YVYU,
+ DRM_FORMAT_UYVY,
+ DRM_FORMAT_VYUY,
+ DRM_FORMAT_YUV444, /* YUV444 8bit */
+ /*
+ * TODO: add formats below that HW supports:
+ * - YUV420 P010
+ * - YUV420 Hantro
+ * - YUV444 10bit
+ */
+};
+
+#define FRAC_16_16(mult, div) (((mult) << 16) / (div))
+
+static int zx_vl_plane_atomic_check(struct drm_plane *plane,
+ struct drm_plane_state *plane_state)
+{
+ struct drm_framebuffer *fb = plane_state->fb;
+ struct drm_crtc *crtc = plane_state->crtc;
+ struct drm_crtc_state *crtc_state;
+ struct drm_rect clip;
+ int min_scale = FRAC_16_16(1, 8);
+ int max_scale = FRAC_16_16(8, 1);
+
+ if (!crtc || !fb)
+ return 0;
+
+ crtc_state = drm_atomic_get_existing_crtc_state(plane_state->state,
+ crtc);
+ if (WARN_ON(!crtc_state))
+ return -EINVAL;
+
+ /* nothing to check when disabling or disabled */
+ if (!crtc_state->enable)
+ return 0;
+
+ /* plane must be enabled */
+ if (!plane_state->crtc)
+ return -EINVAL;
+
+ clip.x1 = 0;
+ clip.y1 = 0;
+ clip.x2 = crtc_state->adjusted_mode.hdisplay;
+ clip.y2 = crtc_state->adjusted_mode.vdisplay;
+
+ return drm_plane_helper_check_state(plane_state, &clip,
+ min_scale, max_scale,
+ true, true);
+}
+
+static u32 zx_vl_get_fmt(uint32_t format)
+{
+ u32 val = 0;
+
+ switch (format) {
+ case DRM_FORMAT_NV12:
+ val = VL_FMT_YUV420;
+ break;
+ case DRM_FORMAT_YUV420:
+ val = VL_YUV420_PLANAR | VL_FMT_YUV420;
+ break;
+ case DRM_FORMAT_YUYV:
+ val = VL_YUV422_YUYV | VL_FMT_YUV422;
+ break;
+ case DRM_FORMAT_YVYU:
+ val = VL_YUV422_YVYU | VL_FMT_YUV422;
+ break;
+ case DRM_FORMAT_UYVY:
+ val = VL_YUV422_UYVY | VL_FMT_YUV422;
+ break;
+ case DRM_FORMAT_VYUY:
+ val = VL_YUV422_VYUY | VL_FMT_YUV422;
+ break;
+ case DRM_FORMAT_YUV444:
+ val = VL_FMT_YUV444_8BIT;
+ break;
+ default:
+ WARN_ONCE(1, "invalid pixel format %d\n", format);
+ }
+
+ return val;
+}
+
+static inline void zx_vl_set_update(struct zx_plane *zplane)
+{
+ void __iomem *layer = zplane->layer;
+
+ zx_writel_mask(layer + VL_CTRL0, VL_UPDATE, VL_UPDATE);
+}
+
+static inline void zx_vl_rsz_set_update(struct zx_plane *zplane)
+{
+ zx_writel(zplane->rsz + RSZ_VL_ENABLE_CFG, 1);
+}
+
+static u32 zx_vl_rsz_get_fmt(uint32_t format)
+{
+ u32 val = 0;
+
+ switch (format) {
+ case DRM_FORMAT_NV12:
+ case DRM_FORMAT_YUV420:
+ val = RSZ_VL_FMT_YCBCR420;
+ break;
+ case DRM_FORMAT_YUYV:
+ case DRM_FORMAT_YVYU:
+ case DRM_FORMAT_UYVY:
+ case DRM_FORMAT_VYUY:
+ val = RSZ_VL_FMT_YCBCR422;
+ break;
+ case DRM_FORMAT_YUV444:
+ val = RSZ_VL_FMT_YCBCR444;
+ break;
+ default:
+ WARN_ONCE(1, "invalid pixel format %d\n", format);
+ }
+
+ return val;
+}
+
+static inline u32 rsz_step_value(u32 src, u32 dst)
+{
+ u32 val = 0;
+
+ if (src == dst)
+ val = 0;
+ else if (src < dst)
+ val = RSZ_PARA_STEP((src << 16) / dst);
+ else if (src > dst)
+ val = RSZ_DATA_STEP(src / dst) |
+ RSZ_PARA_STEP(((src << 16) / dst) & 0xffff);
+
+ return val;
+}
+
+static void zx_vl_rsz_setup(struct zx_plane *zplane, uint32_t format,
+ u32 src_w, u32 src_h, u32 dst_w, u32 dst_h)
+{
+ void __iomem *rsz = zplane->rsz;
+ u32 src_chroma_w = src_w;
+ u32 src_chroma_h = src_h;
+ u32 fmt;
+
+ /* Set up source and destination resolution */
+ zx_writel(rsz + RSZ_SRC_CFG, RSZ_VER(src_h - 1) | RSZ_HOR(src_w - 1));
+ zx_writel(rsz + RSZ_DEST_CFG, RSZ_VER(dst_h - 1) | RSZ_HOR(dst_w - 1));
+
+ /* Configure data format for VL RSZ */
+ fmt = zx_vl_rsz_get_fmt(format);
+ zx_writel_mask(rsz + RSZ_VL_CTRL_CFG, RSZ_VL_FMT_MASK, fmt);
+
+ /* Calculate Chroma heigth and width */
+ if (fmt == RSZ_VL_FMT_YCBCR420) {
+ src_chroma_w = src_w >> 1;
+ src_chroma_h = src_h >> 1;
+ } else if (fmt == RSZ_VL_FMT_YCBCR422) {
+ src_chroma_w = src_w >> 1;
+ }
+
+ /* Set up Luma and Chroma step registers */
+ zx_writel(rsz + RSZ_VL_LUMA_HOR, rsz_step_value(src_w, dst_w));
+ zx_writel(rsz + RSZ_VL_LUMA_VER, rsz_step_value(src_h, dst_h));
+ zx_writel(rsz + RSZ_VL_CHROMA_HOR, rsz_step_value(src_chroma_w, dst_w));
+ zx_writel(rsz + RSZ_VL_CHROMA_VER, rsz_step_value(src_chroma_h, dst_h));
+
+ zx_vl_rsz_set_update(zplane);
+}
+
+static void zx_vl_plane_atomic_update(struct drm_plane *plane,
+ struct drm_plane_state *old_state)
+{
+ struct zx_plane *zplane = to_zx_plane(plane);
+ struct drm_plane_state *state = plane->state;
+ struct drm_framebuffer *fb = state->fb;
+ struct drm_rect *src = &state->src;
+ struct drm_rect *dst = &state->dst;
+ struct drm_gem_cma_object *cma_obj;
+ void __iomem *layer = zplane->layer;
+ void __iomem *hbsc = zplane->hbsc;
+ void __iomem *paddr_reg;
+ dma_addr_t paddr;
+ u32 src_x, src_y, src_w, src_h;
+ u32 dst_x, dst_y, dst_w, dst_h;
+ uint32_t format;
+ u32 fmt;
+ int num_planes;
+ int i;
+
+ if (!fb)
+ return;
+
+ format = fb->pixel_format;
+
+ src_x = src->x1 >> 16;
+ src_y = src->y1 >> 16;
+ src_w = drm_rect_width(src) >> 16;
+ src_h = drm_rect_height(src) >> 16;
+
+ dst_x = dst->x1;
+ dst_y = dst->y1;
+ dst_w = drm_rect_width(dst);
+ dst_h = drm_rect_height(dst);
+
+ /* Set up data address registers for Y, Cb and Cr planes */
+ num_planes = drm_format_num_planes(format);
+ paddr_reg = layer + VL_Y;
+ for (i = 0; i < num_planes; i++) {
+ cma_obj = drm_fb_cma_get_gem_obj(fb, i);
+ paddr = cma_obj->paddr + fb->offsets[i];
+ paddr += src_y * fb->pitches[i];
+ paddr += src_x * drm_format_plane_cpp(format, i);
+ zx_writel(paddr_reg, paddr);
+ paddr_reg += 4;
+ }
+
+ /* Set up source height/width register */
+ zx_writel(layer + VL_SRC_SIZE, GL_SRC_W(src_w) | GL_SRC_H(src_h));
+
+ /* Set up start position register */
+ zx_writel(layer + VL_POS_START, GL_POS_X(dst_x) | GL_POS_Y(dst_y));
+
+ /* Set up end position register */
+ zx_writel(layer + VL_POS_END,
+ GL_POS_X(dst_x + dst_w) | GL_POS_Y(dst_y + dst_h));
+
+ /* Strides of Cb and Cr planes should be identical */
+ zx_writel(layer + VL_STRIDE, LUMA_STRIDE(fb->pitches[0]) |
+ CHROMA_STRIDE(fb->pitches[1]));
+
+ /* Set up video layer data format */
+ fmt = zx_vl_get_fmt(format);
+ zx_writel(layer + VL_CTRL1, fmt);
+
+ /* Always use scaler since it exists (set for not bypass) */
+ zx_writel_mask(layer + VL_CTRL2, VL_SCALER_BYPASS_MODE,
+ VL_SCALER_BYPASS_MODE);
+
+ zx_vl_rsz_setup(zplane, format, src_w, src_h, dst_w, dst_h);
+
+ /* Enable HBSC block */
+ zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, HBSC_CTRL_EN);
+
+ zx_vou_layer_enable(plane);
+
+ zx_vl_set_update(zplane);
+}
+
+static void zx_plane_atomic_disable(struct drm_plane *plane,
+ struct drm_plane_state *old_state)
+{
+ struct zx_plane *zplane = to_zx_plane(plane);
+ void __iomem *hbsc = zplane->hbsc;
+
+ zx_vou_layer_disable(plane);
+
+ /* Disable HBSC block */
+ zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, 0);
+}
+
+static const struct drm_plane_helper_funcs zx_vl_plane_helper_funcs = {
+ .atomic_check = zx_vl_plane_atomic_check,
+ .atomic_update = zx_vl_plane_atomic_update,
+ .atomic_disable = zx_plane_atomic_disable,
+};
+
static int zx_gl_plane_atomic_check(struct drm_plane *plane,
struct drm_plane_state *plane_state)
{
@@ -97,14 +366,6 @@ static inline void zx_gl_rsz_set_update(struct zx_plane *zplane)
zx_writel(zplane->rsz + RSZ_ENABLE_CFG, 1);
}
-void zx_plane_set_update(struct drm_plane *plane)
-{
- struct zx_plane *zplane = to_zx_plane(plane);
-
- zx_gl_rsz_set_update(zplane);
- zx_gl_set_update(zplane);
-}
-
static void zx_gl_rsz_setup(struct zx_plane *zplane, u32 src_w, u32 src_h,
u32 dst_w, u32 dst_h)
{
@@ -202,18 +463,6 @@ static void zx_gl_plane_atomic_update(struct drm_plane *plane,
zx_gl_set_update(zplane);
}
-static void zx_plane_atomic_disable(struct drm_plane *plane,
- struct drm_plane_state *old_state)
-{
- struct zx_plane *zplane = to_zx_plane(plane);
- void __iomem *hbsc = zplane->hbsc;
-
- zx_vou_layer_disable(plane);
-
- /* Disable HBSC block */
- zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, 0);
-}
-
static const struct drm_plane_helper_funcs zx_gl_plane_helper_funcs = {
.atomic_check = zx_gl_plane_atomic_check,
.atomic_update = zx_gl_plane_atomic_update,
@@ -235,6 +484,24 @@ static void zx_plane_destroy(struct drm_plane *plane)
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
};
+void zx_plane_set_update(struct drm_plane *plane)
+{
+ struct zx_plane *zplane = to_zx_plane(plane);
+
+ switch (plane->type) {
+ case DRM_PLANE_TYPE_PRIMARY:
+ zx_gl_rsz_set_update(zplane);
+ zx_gl_set_update(zplane);
+ break;
+ case DRM_PLANE_TYPE_OVERLAY:
+ zx_vl_rsz_set_update(zplane);
+ zx_vl_set_update(zplane);
+ break;
+ default:
+ WARN_ONCE(1, "unsupported plane type %d\n", plane->type);
+ }
+}
+
static void zx_plane_hbsc_init(struct zx_plane *zplane)
{
void __iomem *hbsc = zplane->hbsc;
@@ -272,7 +539,9 @@ int zx_plane_init(struct drm_device *drm, struct zx_plane *zplane,
format_count = ARRAY_SIZE(gl_formats);
break;
case DRM_PLANE_TYPE_OVERLAY:
- /* TODO: add video layer (vl) support */
+ helper = &zx_vl_plane_helper_funcs;
+ formats = vl_formats;
+ format_count = ARRAY_SIZE(vl_formats);
break;
default:
return -ENODEV;
diff --git a/drivers/gpu/drm/zte/zx_plane_regs.h b/drivers/gpu/drm/zte/zx_plane_regs.h
index 3dde6716a558..65f271aeabed 100644
--- a/drivers/gpu/drm/zte/zx_plane_regs.h
+++ b/drivers/gpu/drm/zte/zx_plane_regs.h
@@ -46,6 +46,37 @@
#define GL_POS_X(x) (((x) << GL_POS_X_SHIFT) & GL_POS_X_MASK)
#define GL_POS_Y(x) (((x) << GL_POS_Y_SHIFT) & GL_POS_Y_MASK)
+/* VL registers */
+#define VL_CTRL0 0x00
+#define VL_UPDATE BIT(3)
+#define VL_CTRL1 0x04
+#define VL_YUV420_PLANAR BIT(5)
+#define VL_YUV422_SHIFT 3
+#define VL_YUV422_YUYV (0 << VL_YUV422_SHIFT)
+#define VL_YUV422_YVYU (1 << VL_YUV422_SHIFT)
+#define VL_YUV422_UYVY (2 << VL_YUV422_SHIFT)
+#define VL_YUV422_VYUY (3 << VL_YUV422_SHIFT)
+#define VL_FMT_YUV420 0
+#define VL_FMT_YUV422 1
+#define VL_FMT_YUV420_P010 2
+#define VL_FMT_YUV420_HANTRO 3
+#define VL_FMT_YUV444_8BIT 4
+#define VL_FMT_YUV444_10BIT 5
+#define VL_CTRL2 0x08
+#define VL_SCALER_BYPASS_MODE BIT(0)
+#define VL_STRIDE 0x0c
+#define LUMA_STRIDE_SHIFT 16
+#define LUMA_STRIDE_MASK (0xffff << LUMA_STRIDE_SHIFT)
+#define CHROMA_STRIDE_SHIFT 0
+#define CHROMA_STRIDE_MASK (0xffff << CHROMA_STRIDE_SHIFT)
+#define VL_SRC_SIZE 0x10
+#define VL_Y 0x14
+#define VL_POS_START 0x30
+#define VL_POS_END 0x34
+
+#define LUMA_STRIDE(x) (((x) << LUMA_STRIDE_SHIFT) & LUMA_STRIDE_MASK)
+#define CHROMA_STRIDE(x) (((x) << CHROMA_STRIDE_SHIFT) & CHROMA_STRIDE_MASK)
+
/* CSC registers */
#define CSC_CTRL0 0x30
#define CSC_COV_MODE_SHIFT 16
@@ -69,6 +100,18 @@
#define RSZ_DEST_CFG 0x04
#define RSZ_ENABLE_CFG 0x14
+#define RSZ_VL_LUMA_HOR 0x08
+#define RSZ_VL_LUMA_VER 0x0c
+#define RSZ_VL_CHROMA_HOR 0x10
+#define RSZ_VL_CHROMA_VER 0x14
+#define RSZ_VL_CTRL_CFG 0x18
+#define RSZ_VL_FMT_SHIFT 3
+#define RSZ_VL_FMT_MASK (0x3 << RSZ_VL_FMT_SHIFT)
+#define RSZ_VL_FMT_YCBCR420 (0x0 << RSZ_VL_FMT_SHIFT)
+#define RSZ_VL_FMT_YCBCR422 (0x1 << RSZ_VL_FMT_SHIFT)
+#define RSZ_VL_FMT_YCBCR444 (0x2 << RSZ_VL_FMT_SHIFT)
+#define RSZ_VL_ENABLE_CFG 0x1c
+
#define RSZ_VER_SHIFT 16
#define RSZ_VER_MASK (0xffff << RSZ_VER_SHIFT)
#define RSZ_HOR_SHIFT 0
@@ -77,6 +120,14 @@
#define RSZ_VER(x) (((x) << RSZ_VER_SHIFT) & RSZ_VER_MASK)
#define RSZ_HOR(x) (((x) << RSZ_HOR_SHIFT) & RSZ_HOR_MASK)
+#define RSZ_DATA_STEP_SHIFT 16
+#define RSZ_DATA_STEP_MASK (0xffff << RSZ_DATA_STEP_SHIFT)
+#define RSZ_PARA_STEP_SHIFT 0
+#define RSZ_PARA_STEP_MASK (0xffff << RSZ_PARA_STEP_SHIFT)
+
+#define RSZ_DATA_STEP(x) (((x) << RSZ_DATA_STEP_SHIFT) & RSZ_DATA_STEP_MASK)
+#define RSZ_PARA_STEP(x) (((x) << RSZ_PARA_STEP_SHIFT) & RSZ_PARA_STEP_MASK)
+
/* HBSC registers */
#define HBSC_SATURATION 0x00
#define HBSC_HUE 0x04
diff --git a/drivers/gpu/drm/zte/zx_vou.c b/drivers/gpu/drm/zte/zx_vou.c
index 3fb4fc04e693..e832c2ec3156 100644
--- a/drivers/gpu/drm/zte/zx_vou.c
+++ b/drivers/gpu/drm/zte/zx_vou.c
@@ -84,6 +84,8 @@ struct zx_crtc_bits {
struct zx_crtc {
struct drm_crtc crtc;
struct drm_plane *primary;
+ struct drm_plane *overlay_active[VL_NUM];
+ unsigned int overlay_active_num;
struct zx_vou_hw *vou;
void __iomem *chnreg;
const struct zx_crtc_regs *regs;
@@ -112,6 +114,22 @@ struct vou_layer_bits {
},
};
+static const struct vou_layer_bits zx_vl_bits[VL_NUM] = {
+ {
+ .enable = OSD_CTRL0_VL0_EN,
+ .chnsel = OSD_CTRL0_VL0_SEL,
+ .clksel = VOU_CLK_VL0_SEL,
+ }, {
+ .enable = OSD_CTRL0_VL1_EN,
+ .chnsel = OSD_CTRL0_VL1_SEL,
+ .clksel = VOU_CLK_VL1_SEL,
+ }, {
+ .enable = OSD_CTRL0_VL2_EN,
+ .chnsel = OSD_CTRL0_VL2_SEL,
+ .clksel = VOU_CLK_VL2_SEL,
+ },
+};
+
struct zx_vou_hw {
struct device *dev;
void __iomem *osd;
@@ -439,6 +457,9 @@ void zx_vou_layer_enable(struct drm_plane *plane)
}
zx_writel_mask(vou->osd + OSD_CTRL0, bits->enable, bits->enable);
+
+ if (plane->type == DRM_PLANE_TYPE_OVERLAY)
+ zcrtc->overlay_active[zcrtc->overlay_active_num++] = plane;
}
void zx_vou_layer_disable(struct drm_plane *plane)
@@ -449,6 +470,51 @@ void zx_vou_layer_disable(struct drm_plane *plane)
const struct vou_layer_bits *bits = zplane->bits;
zx_writel_mask(vou->osd + OSD_CTRL0, bits->enable, 0);
+
+ if (plane->type == DRM_PLANE_TYPE_OVERLAY)
+ zcrtc->overlay_active[zcrtc->overlay_active_num--] = NULL;
+}
+
+static void zx_overlay_init(struct drm_device *drm, struct zx_vou_hw *vou)
+{
+ struct device *dev = vou->dev;
+ struct zx_plane *zplane;
+ int i;
+ int ret;
+
+ /*
+ * VL0 has some quirks on scaling support which need special handling.
+ * Let's leave it out for now.
+ */
+ for (i = 1; i < VL_NUM; i++) {
+ zplane = devm_kzalloc(dev, sizeof(*zplane), GFP_KERNEL);
+ if (!zplane) {
+ DRM_DEV_ERROR(dev, "failed to allocate zplane %d\n", i);
+ return;
+ }
+
+ zplane->layer = vou->osd + OSD_VL_OFFSET(i);
+ zplane->hbsc = vou->osd + HBSC_VL_OFFSET(i);
+ zplane->rsz = vou->otfppu + RSZ_VL_OFFSET(i);
+ zplane->bits = &zx_vl_bits[i];
+
+ ret = zx_plane_init(drm, zplane, DRM_PLANE_TYPE_OVERLAY);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "failed to init overlay %d\n", i);
+ continue;
+ }
+ }
+}
+
+static inline void zx_osd_int_update(struct zx_crtc *zcrtc)
+{
+ int i;
+
+ vou_chn_set_update(zcrtc);
+ zx_plane_set_update(zcrtc->primary);
+
+ for (i = 0; i < zcrtc->overlay_active_num; i++)
+ zx_plane_set_update(zcrtc->overlay_active[i]);
}
static irqreturn_t vou_irq_handler(int irq, void *dev_id)
@@ -470,15 +536,11 @@ static irqreturn_t vou_irq_handler(int irq, void *dev_id)
state = zx_readl(vou->osd + OSD_INT_STA);
zx_writel(vou->osd + OSD_INT_CLRSTA, state);
- if (state & OSD_INT_MAIN_UPT) {
- vou_chn_set_update(vou->main_crtc);
- zx_plane_set_update(vou->main_crtc->primary);
- }
+ if (state & OSD_INT_MAIN_UPT)
+ zx_osd_int_update(vou->main_crtc);
- if (state & OSD_INT_AUX_UPT) {
- vou_chn_set_update(vou->aux_crtc);
- zx_plane_set_update(vou->aux_crtc->primary);
- }
+ if (state & OSD_INT_AUX_UPT)
+ zx_osd_int_update(vou->aux_crtc);
if (state & OSD_INT_ERROR)
DRM_DEV_ERROR(vou->dev, "OSD ERROR: 0x%08x!\n", state);
@@ -648,6 +710,8 @@ static int zx_crtc_bind(struct device *dev, struct device *master, void *data)
goto disable_ppu_clk;
}
+ zx_overlay_init(drm, vou);
+
return 0;
disable_ppu_clk:
diff --git a/drivers/gpu/drm/zte/zx_vou_regs.h b/drivers/gpu/drm/zte/zx_vou_regs.h
index f44e7a4ae441..193c1ce01fe7 100644
--- a/drivers/gpu/drm/zte/zx_vou_regs.h
+++ b/drivers/gpu/drm/zte/zx_vou_regs.h
@@ -22,6 +22,15 @@
#define AUX_HBSC_OFFSET 0x860
#define AUX_RSZ_OFFSET 0x800
+#define OSD_VL0_OFFSET 0x040
+#define OSD_VL_OFFSET(i) (OSD_VL0_OFFSET + 0x050 * (i))
+
+#define HBSC_VL0_OFFSET 0x760
+#define HBSC_VL_OFFSET(i) (HBSC_VL0_OFFSET + 0x040 * (i))
+
+#define RSZ_VL1_U0 0xa00
+#define RSZ_VL_OFFSET(i) (RSZ_VL1_U0 + 0x200 * (i))
+
/* OSD (GPC_GLOBAL) registers */
#define OSD_INT_STA 0x04
#define OSD_INT_CLRSTA 0x08
@@ -42,6 +51,12 @@
)
#define OSD_INT_ENABLE (OSD_INT_ERROR | OSD_INT_AUX_UPT | OSD_INT_MAIN_UPT)
#define OSD_CTRL0 0x10
+#define OSD_CTRL0_VL0_EN BIT(13)
+#define OSD_CTRL0_VL0_SEL BIT(12)
+#define OSD_CTRL0_VL1_EN BIT(11)
+#define OSD_CTRL0_VL1_SEL BIT(10)
+#define OSD_CTRL0_VL2_EN BIT(9)
+#define OSD_CTRL0_VL2_SEL BIT(8)
#define OSD_CTRL0_GL0_EN BIT(7)
#define OSD_CTRL0_GL0_SEL BIT(6)
#define OSD_CTRL0_GL1_EN BIT(5)
@@ -146,6 +161,9 @@
#define VOU_INF_DATA_SEL 0x08
#define VOU_SOFT_RST 0x14
#define VOU_CLK_SEL 0x18
+#define VOU_CLK_VL2_SEL BIT(8)
+#define VOU_CLK_VL1_SEL BIT(7)
+#define VOU_CLK_VL0_SEL BIT(6)
#define VOU_CLK_GL1_SEL BIT(5)
#define VOU_CLK_GL0_SEL BIT(4)
#define VOU_CLK_REQEN 0x20
--
1.9.1
^ permalink raw reply related
* [PATCH v5 0/4] clk: rockchip: support clk controller for rk3328 SoC
From: Elaine Zhang @ 2016-12-29 2:45 UTC (permalink / raw)
To: linux-arm-kernel
Changes in v5:
fix up some code style, remove grf clk init and cru dump.
Changes in v4:
dropping the "rockchip,cru" and "syscon" properties for bindings of rk3328
adjust the pacth 3 and 4 order.
move pll_rk3328 to patch 3.
Changes in v3:
fix up the pll type pll_rk3328 description and use.
Changes in v2:
add bindings for rk3328 clock controller
Elaine Zhang (4):
clk: rockchip: add dt-binding header for rk3328
dt-bindings: add bindings for rk3328 clock controller
clk: rockchip: add new pll-type for rk3328
clk: rockchip: add clock controller for rk3328
.../bindings/clock/rockchip,rk3328-cru.txt | 57 ++
drivers/clk/rockchip/Makefile | 1 +
drivers/clk/rockchip/clk-pll.c | 16 +-
drivers/clk/rockchip/clk-rk3328.c | 896 +++++++++++++++++++++
drivers/clk/rockchip/clk.h | 19 +
include/dt-bindings/clock/rk3328-cru.h | 403 +++++++++
6 files changed, 1389 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
create mode 100644 drivers/clk/rockchip/clk-rk3328.c
create mode 100644 include/dt-bindings/clock/rk3328-cru.h
--
1.9.1
^ permalink raw reply
* [PATCH v5 1/4] clk: rockchip: add dt-binding header for rk3328
From: Elaine Zhang @ 2016-12-29 2:45 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1482979511-6847-1-git-send-email-zhangqing@rock-chips.com>
Add the dt-bindings header for the rk3328, that gets shared between
the clock controller and the clock references in the dts.
Add softreset ID for rk3328.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
include/dt-bindings/clock/rk3328-cru.h | 403 +++++++++++++++++++++++++++++++++
1 file changed, 403 insertions(+)
create mode 100644 include/dt-bindings/clock/rk3328-cru.h
diff --git a/include/dt-bindings/clock/rk3328-cru.h b/include/dt-bindings/clock/rk3328-cru.h
new file mode 100644
index 000000000000..545ed7541316
--- /dev/null
+++ b/include/dt-bindings/clock/rk3328-cru.h
@@ -0,0 +1,403 @@
+/*
+ * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
+ * Author: Elaine <zhangqing@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3328_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3328_H
+
+/* core clocks */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_CPLL 3
+#define PLL_GPLL 4
+#define PLL_NPLL 5
+#define ARMCLK 6
+
+/* sclk gates (special clocks) */
+#define SCLK_RTC32K 30
+#define SCLK_SDMMC_EXT 31
+#define SCLK_SPI 32
+#define SCLK_SDMMC 33
+#define SCLK_SDIO 34
+#define SCLK_EMMC 35
+#define SCLK_TSADC 36
+#define SCLK_SARADC 37
+#define SCLK_UART0 38
+#define SCLK_UART1 39
+#define SCLK_UART2 40
+#define SCLK_I2S0 41
+#define SCLK_I2S1 42
+#define SCLK_I2S2 43
+#define SCLK_I2S1_OUT 44
+#define SCLK_I2S2_OUT 45
+#define SCLK_SPDIF 46
+#define SCLK_TIMER0 47
+#define SCLK_TIMER1 48
+#define SCLK_TIMER2 49
+#define SCLK_TIMER3 50
+#define SCLK_TIMER4 51
+#define SCLK_TIMER5 52
+#define SCLK_WIFI 53
+#define SCLK_CIF_OUT 54
+#define SCLK_I2C0 55
+#define SCLK_I2C1 56
+#define SCLK_I2C2 57
+#define SCLK_I2C3 58
+#define SCLK_CRYPTO 59
+#define SCLK_PWM 60
+#define SCLK_PDM 61
+#define SCLK_EFUSE 62
+#define SCLK_OTP 63
+#define SCLK_DDRCLK 64
+#define SCLK_VDEC_CABAC 65
+#define SCLK_VDEC_CORE 66
+#define SCLK_VENC_DSP 67
+#define SCLK_VENC_CORE 68
+#define SCLK_RGA 69
+#define SCLK_HDMI_SFC 70
+#define SCLK_HDMI_CEC 71
+#define SCLK_USB3_REF 72
+#define SCLK_USB3_SUSPEND 73
+#define SCLK_SDMMC_DRV 74
+#define SCLK_SDIO_DRV 75
+#define SCLK_EMMC_DRV 76
+#define SCLK_SDMMC_EXT_DRV 77
+#define SCLK_SDMMC_SAMPLE 78
+#define SCLK_SDIO_SAMPLE 79
+#define SCLK_EMMC_SAMPLE 80
+#define SCLK_SDMMC_EXT_SAMPLE 81
+#define SCLK_VOP 82
+#define SCLK_MAC2PHY_RXTX 83
+#define SCLK_MAC2PHY_SRC 84
+#define SCLK_MAC2PHY_REF 85
+#define SCLK_MAC2PHY_OUT 86
+#define SCLK_MAC2IO_RX 87
+#define SCLK_MAC2IO_TX 88
+#define SCLK_MAC2IO_REFOUT 89
+#define SCLK_MAC2IO_REF 90
+#define SCLK_MAC2IO_OUT 91
+#define SCLK_TSP 92
+#define SCLK_HSADC_TSP 93
+#define SCLK_USB3PHY_REF 94
+#define SCLK_REF_USB3OTG 95
+#define SCLK_USB3OTG_REF 96
+#define SCLK_USB3OTG_SUSPEND 97
+#define SCLK_REF_USB3OTG_SRC 98
+#define SCLK_MAC2IO_SRC 99
+
+/* dclk gates */
+#define DCLK_LCDC 180
+#define DCLK_HDMIPHY 181
+#define HDMIPHY 182
+#define USB480M 183
+#define DCLK_LCDC_SRC 184
+
+/* aclk gates */
+#define ACLK_AXISRAM 190
+#define ACLK_VOP_PRE 191
+#define ACLK_USB3OTG 192
+#define ACLK_RGA_PRE 193
+#define ACLK_DMAC 194
+#define ACLK_GPU 195
+#define ACLK_BUS_PRE 196
+#define ACLK_PERI_PRE 197
+#define ACLK_RKVDEC_PRE 198
+#define ACLK_RKVDEC 199
+#define ACLK_RKVENC 200
+#define ACLK_VPU_PRE 201
+#define ACLK_VIO_PRE 202
+#define ACLK_VPU 203
+#define ACLK_VIO 204
+#define ACLK_VOP 205
+#define ACLK_GMAC 206
+#define ACLK_H265 207
+#define ACLK_H264 208
+#define ACLK_MAC2PHY 209
+#define ACLK_MAC2IO 210
+#define ACLK_DCF 211
+#define ACLK_TSP 212
+#define ACLK_PERI 213
+#define ACLK_RGA 214
+#define ACLK_IEP 215
+#define ACLK_CIF 216
+#define ACLK_HDCP 217
+
+/* pclk gates */
+#define PCLK_GPIO0 300
+#define PCLK_GPIO1 301
+#define PCLK_GPIO2 302
+#define PCLK_GPIO3 303
+#define PCLK_GRF 304
+#define PCLK_I2C0 305
+#define PCLK_I2C1 306
+#define PCLK_I2C2 307
+#define PCLK_I2C3 308
+#define PCLK_SPI 309
+#define PCLK_UART0 310
+#define PCLK_UART1 311
+#define PCLK_UART2 312
+#define PCLK_TSADC 313
+#define PCLK_PWM 314
+#define PCLK_TIMER 315
+#define PCLK_BUS_PRE 316
+#define PCLK_PERI_PRE 317
+#define PCLK_HDMI_CTRL 318
+#define PCLK_HDMI_PHY 319
+#define PCLK_GMAC 320
+#define PCLK_H265 321
+#define PCLK_MAC2PHY 322
+#define PCLK_MAC2IO 323
+#define PCLK_USB3PHY_OTG 324
+#define PCLK_USB3PHY_PIPE 325
+#define PCLK_USB3_GRF 326
+#define PCLK_USB2_GRF 327
+#define PCLK_HDMIPHY 328
+#define PCLK_DDR 329
+#define PCLK_PERI 330
+#define PCLK_HDMI 331
+#define PCLK_HDCP 332
+#define PCLK_DCF 333
+#define PCLK_SARADC 334
+
+/* hclk gates */
+#define HCLK_PERI 408
+#define HCLK_TSP 409
+#define HCLK_GMAC 410
+#define HCLK_I2S0_8CH 411
+#define HCLK_I2S1_8CH 413
+#define HCLK_I2S2_2CH 413
+#define HCLK_SPDIF_8CH 414
+#define HCLK_VOP 415
+#define HCLK_NANDC 416
+#define HCLK_SDMMC 417
+#define HCLK_SDIO 418
+#define HCLK_EMMC 419
+#define HCLK_SDMMC_EXT 420
+#define HCLK_RKVDEC_PRE 421
+#define HCLK_RKVDEC 422
+#define HCLK_RKVENC 423
+#define HCLK_VPU_PRE 424
+#define HCLK_VIO_PRE 425
+#define HCLK_VPU 426
+#define HCLK_VIO 427
+#define HCLK_BUS_PRE 428
+#define HCLK_PERI_PRE 429
+#define HCLK_H264 430
+#define HCLK_CIF 431
+#define HCLK_OTG_PMU 432
+#define HCLK_OTG 433
+#define HCLK_HOST0 434
+#define HCLK_HOST0_ARB 435
+#define HCLK_CRYPTO_MST 436
+#define HCLK_CRYPTO_SLV 437
+#define HCLK_PDM 438
+#define HCLK_IEP 439
+#define HCLK_RGA 440
+#define HCLK_HDCP 441
+
+#define CLK_NR_CLKS (HCLK_HDCP + 1)
+
+#define SCLK_MAC2IO 0
+#define SCLK_MAC2PHY 1
+
+#define CLKGRF_NR_CLKS (SCLK_MAC2PHY + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0_PO 0
+#define SRST_CORE1_PO 1
+#define SRST_CORE2_PO 2
+#define SRST_CORE3_PO 3
+#define SRST_CORE0 4
+#define SRST_CORE1 5
+#define SRST_CORE2 6
+#define SRST_CORE3 7
+#define SRST_CORE0_DBG 8
+#define SRST_CORE1_DBG 9
+#define SRST_CORE2_DBG 10
+#define SRST_CORE3_DBG 11
+#define SRST_TOPDBG 12
+#define SRST_CORE_NIU 13
+#define SRST_STRC_A 14
+#define SRST_L2C 15
+
+#define SRST_A53_GIC 18
+#define SRST_DAP 19
+#define SRST_PMU_P 21
+#define SRST_EFUSE 22
+#define SRST_BUSSYS_H 23
+#define SRST_BUSSYS_P 24
+#define SRST_SPDIF 25
+#define SRST_INTMEM 26
+#define SRST_ROM 27
+#define SRST_GPIO0 28
+#define SRST_GPIO1 29
+#define SRST_GPIO2 30
+#define SRST_GPIO3 31
+
+#define SRST_I2S0 32
+#define SRST_I2S1 33
+#define SRST_I2S2 34
+#define SRST_I2S0_H 35
+#define SRST_I2S1_H 36
+#define SRST_I2S2_H 37
+#define SRST_UART0 38
+#define SRST_UART1 39
+#define SRST_UART2 40
+#define SRST_UART0_P 41
+#define SRST_UART1_P 42
+#define SRST_UART2_P 43
+#define SRST_I2C0 44
+#define SRST_I2C1 45
+#define SRST_I2C2 46
+#define SRST_I2C3 47
+
+#define SRST_I2C0_P 48
+#define SRST_I2C1_P 49
+#define SRST_I2C2_P 50
+#define SRST_I2C3_P 51
+#define SRST_EFUSE_SE_P 52
+#define SRST_EFUSE_NS_P 53
+#define SRST_PWM0 54
+#define SRST_PWM0_P 55
+#define SRST_DMA 56
+#define SRST_TSP_A 57
+#define SRST_TSP_H 58
+#define SRST_TSP 59
+#define SRST_TSP_HSADC 60
+#define SRST_DCF_A 61
+#define SRST_DCF_P 62
+
+#define SRST_SCR 64
+#define SRST_SPI 65
+#define SRST_TSADC 66
+#define SRST_TSADC_P 67
+#define SRST_CRYPTO 68
+#define SRST_SGRF 69
+#define SRST_GRF 70
+#define SRST_USB_GRF 71
+#define SRST_TIMER_6CH_P 72
+#define SRST_TIMER0 73
+#define SRST_TIMER1 74
+#define SRST_TIMER2 75
+#define SRST_TIMER3 76
+#define SRST_TIMER4 77
+#define SRST_TIMER5 78
+#define SRST_USB3GRF 79
+
+#define SRST_PHYNIU 80
+#define SRST_HDMIPHY 81
+#define SRST_VDAC 82
+#define SRST_ACODEC_p 83
+#define SRST_SARADC 85
+#define SRST_SARADC_P 86
+#define SRST_GRF_DDR 87
+#define SRST_DFIMON 88
+#define SRST_MSCH 89
+#define SRST_DDRMSCH 91
+#define SRST_DDRCTRL 92
+#define SRST_DDRCTRL_P 93
+#define SRST_DDRPHY 94
+#define SRST_DDRPHY_P 95
+
+#define SRST_GMAC_NIU_A 96
+#define SRST_GMAC_NIU_P 97
+#define SRST_GMAC2PHY_A 98
+#define SRST_GMAC2IO_A 99
+#define SRST_MACPHY 100
+#define SRST_OTP_PHY 101
+#define SRST_GPU_A 102
+#define SRST_GPU_NIU_A 103
+#define SRST_SDMMCEXT 104
+#define SRST_PERIPH_NIU_A 105
+#define SRST_PERIHP_NIU_H 106
+#define SRST_PERIHP_P 107
+#define SRST_PERIPHSYS_H 108
+#define SRST_MMC0 109
+#define SRST_SDIO 110
+#define SRST_EMMC 111
+
+#define SRST_USB2OTG_H 112
+#define SRST_USB2OTG 113
+#define SRST_USB2OTG_ADP 114
+#define SRST_USB2HOST_H 115
+#define SRST_USB2HOST_ARB 116
+#define SRST_USB2HOST_AUX 117
+#define SRST_USB2HOST_EHCIPHY 118
+#define SRST_USB2HOST_UTMI 119
+#define SRST_USB3OTG 120
+#define SRST_USBPOR 121
+#define SRST_USB2OTG_UTMI 122
+#define SRST_USB2HOST_PHY_UTMI 123
+#define SRST_USB3OTG_UTMI 124
+#define SRST_USB3PHY_U2 125
+#define SRST_USB3PHY_U3 126
+#define SRST_USB3PHY_PIPE 127
+
+#define SRST_VIO_A 128
+#define SRST_VIO_BUS_H 129
+#define SRST_VIO_H2P_H 130
+#define SRST_VIO_ARBI_H 131
+#define SRST_VOP_NIU_A 132
+#define SRST_VOP_A 133
+#define SRST_VOP_H 134
+#define SRST_VOP_D 135
+#define SRST_RGA 136
+#define SRST_RGA_NIU_A 137
+#define SRST_RGA_A 138
+#define SRST_RGA_H 139
+#define SRST_IEP_A 140
+#define SRST_IEP_H 141
+#define SRST_HDMI 142
+#define SRST_HDMI_P 143
+
+#define SRST_HDCP_A 144
+#define SRST_HDCP 145
+#define SRST_HDCP_H 146
+#define SRST_CIF_A 147
+#define SRST_CIF_H 148
+#define SRST_CIF_P 149
+#define SRST_OTP_P 150
+#define SRST_OTP_SBPI 151
+#define SRST_OTP_USER 152
+#define SRST_DDRCTRL_A 153
+#define SRST_DDRSTDY_P 154
+#define SRST_DDRSTDY 155
+#define SRST_PDM_H 156
+#define SRST_PDM 157
+#define SRST_USB3PHY_OTG_P 158
+#define SRST_USB3PHY_PIPE_P 159
+
+#define SRST_VCODEC_A 160
+#define SRST_VCODEC_NIU_A 161
+#define SRST_VCODEC_H 162
+#define SRST_VCODEC_NIU_H 163
+#define SRST_VDEC_A 164
+#define SRST_VDEC_NIU_A 165
+#define SRST_VDEC_H 166
+#define SRST_VDEC_NIU_H 167
+#define SRST_VDEC_CORE 168
+#define SRST_VDEC_CABAC 169
+#define SRST_DDRPHYDIV 175
+
+#define SRST_RKVENC_NIU_A 176
+#define SRST_RKVENC_NIU_H 177
+#define SRST_RKVENC_H265_A 178
+#define SRST_RKVENC_H265_P 179
+#define SRST_RKVENC_H265_CORE 180
+#define SRST_RKVENC_H265_DSP 181
+#define SRST_RKVENC_H264_A 182
+#define SRST_RKVENC_H264_H 183
+#define SRST_RKVENC_INTMEM 184
+
+#endif
--
1.9.1
^ permalink raw reply related
* [PATCH v5 2/4] dt-bindings: add bindings for rk3328 clock controller
From: Elaine Zhang @ 2016-12-29 2:45 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1482979511-6847-1-git-send-email-zhangqing@rock-chips.com>
Add devicetree bindings for Rockchip cru which found on
Rockchip SoCs.
Changes in v4:
dropping the "rockchip,cru" and "syscon" properties for bindings of rk3328
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
.../bindings/clock/rockchip,rk3328-cru.txt | 57 ++++++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
new file mode 100644
index 000000000000..e71c675ba5da
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
@@ -0,0 +1,57 @@
+* Rockchip RK3328 Clock and Reset Unit
+
+The RK3328 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3328-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3328-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "clkin_i2s" - external I2S clock - optional,
+ - "gmac_clkin" - external GMAC clock - optional
+ - "phy_50m_out" - output clock of the pll in the mac phy
+
+Example: Clock controller node:
+
+ cru: clock-controller at ff440000 {
+ compatible = "rockchip,rk3328-cru";
+ reg = <0x0 0xff440000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial at ff120000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff120000 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART0>;
+ };
--
1.9.1
^ permalink raw reply related
* [PATCH v5 3/4] clk: rockchip: add new pll-type for rk3328
From: Elaine Zhang @ 2016-12-29 2:45 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1482979511-6847-1-git-send-email-zhangqing@rock-chips.com>
The rk3328's pll and clock are similar with rk3036's,
it different with pll_mode_mask, the rk3328 soc
pll mode only one bit(rk3036 soc have two bits)
so these should be independent and separate from
the series of rk3328s.
Changes in v4:
adjust the pacth 3 and 4 order.
move pll_rk3328 to patch 3.
Changes in v3:
fix up the pll type pll_rk3328 description and use
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
drivers/clk/rockchip/clk-pll.c | 16 +++++++++++++---
drivers/clk/rockchip/clk.h | 1 +
2 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c
index 6ed605776abd..eec51893a7e6 100644
--- a/drivers/clk/rockchip/clk-pll.c
+++ b/drivers/clk/rockchip/clk-pll.c
@@ -29,6 +29,7 @@
#define PLL_MODE_SLOW 0x0
#define PLL_MODE_NORM 0x1
#define PLL_MODE_DEEP 0x2
+#define PLL_RK3328_MODE_MASK 0x1
struct rockchip_clk_pll {
struct clk_hw hw;
@@ -848,7 +849,8 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
struct clk *pll_clk, *mux_clk;
char pll_name[20];
- if (num_parents != 2) {
+ if ((pll_type != pll_rk3328 && num_parents != 2) ||
+ (pll_type == pll_rk3328 && num_parents != 1)) {
pr_err("%s: needs two parent clocks\n", __func__);
return ERR_PTR(-EINVAL);
}
@@ -865,13 +867,17 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
pll_mux = &pll->pll_mux;
pll_mux->reg = ctx->reg_base + mode_offset;
pll_mux->shift = mode_shift;
- pll_mux->mask = PLL_MODE_MASK;
+ if (pll_type == pll_rk3328)
+ pll_mux->mask = PLL_RK3328_MODE_MASK;
+ else
+ pll_mux->mask = PLL_MODE_MASK;
pll_mux->flags = 0;
pll_mux->lock = &ctx->lock;
pll_mux->hw.init = &init;
if (pll_type == pll_rk3036 ||
pll_type == pll_rk3066 ||
+ pll_type == pll_rk3328 ||
pll_type == pll_rk3399)
pll_mux->flags |= CLK_MUX_HIWORD_MASK;
@@ -884,7 +890,10 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
init.flags = CLK_SET_RATE_PARENT;
init.ops = pll->pll_mux_ops;
init.parent_names = pll_parents;
- init.num_parents = ARRAY_SIZE(pll_parents);
+ if (pll_type == pll_rk3328)
+ init.num_parents = 2;
+ else
+ init.num_parents = ARRAY_SIZE(pll_parents);
mux_clk = clk_register(NULL, &pll_mux->hw);
if (IS_ERR(mux_clk))
@@ -918,6 +927,7 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
switch (pll_type) {
case pll_rk3036:
+ case pll_rk3328:
if (!pll->rate_table || IS_ERR(ctx->grf))
init.ops = &rockchip_rk3036_pll_clk_norate_ops;
else
diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
index d67eecc4ade9..06acb7e0911f 100644
--- a/drivers/clk/rockchip/clk.h
+++ b/drivers/clk/rockchip/clk.h
@@ -130,6 +130,7 @@
enum rockchip_pll_type {
pll_rk3036,
pll_rk3066,
+ pll_rk3328,
pll_rk3399,
};
--
1.9.1
^ permalink raw reply related
* [PATCH v5 4/4] clk: rockchip: add clock controller for rk3328
From: Elaine Zhang @ 2016-12-29 2:45 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1482979511-6847-1-git-send-email-zhangqing@rock-chips.com>
Add the clock tree definition for the new rk3328 SoC.
Changes in v5:
fix up some code style, remove grf clk init and cru dump.
Changes in v4:
adjust the pacth 3 and 4 order.
Changes in v3:
fix up the pll parent only xin24m.
Changes in v2:
fix up these *_sample error description.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
drivers/clk/rockchip/Makefile | 1 +
drivers/clk/rockchip/clk-rk3328.c | 896 ++++++++++++++++++++++++++++++++++++++
drivers/clk/rockchip/clk.h | 18 +
3 files changed, 915 insertions(+)
create mode 100644 drivers/clk/rockchip/clk-rk3328.c
diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
index 16e098c36f90..68b04bfca282 100644
--- a/drivers/clk/rockchip/Makefile
+++ b/drivers/clk/rockchip/Makefile
@@ -16,5 +16,6 @@ obj-y += clk-rk3036.o
obj-y += clk-rk3188.o
obj-y += clk-rk3228.o
obj-y += clk-rk3288.o
+obj-y += clk-rk3328.o
obj-y += clk-rk3368.o
obj-y += clk-rk3399.o
diff --git a/drivers/clk/rockchip/clk-rk3328.c b/drivers/clk/rockchip/clk-rk3328.c
new file mode 100644
index 000000000000..f486ec9e9471
--- /dev/null
+++ b/drivers/clk/rockchip/clk-rk3328.c
@@ -0,0 +1,896 @@
+/*
+ * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
+ * Author: Elaine <zhangqing@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+#include <dt-bindings/clock/rk3328-cru.h>
+#include "clk.h"
+
+#define RK3328_GRF_SOC_STATUS0 0x480
+#define RK3328_GRF_MAC_CON1 0x904
+#define RK3328_GRF_MAC_CON2 0x908
+
+enum rk3328_plls {
+ apll, dpll, cpll, gpll, npll,
+};
+
+static struct rockchip_pll_rate_table rk3328_pll_rates[] = {
+ /* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
+ RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
+ RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
+ RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0),
+ RK3036_PLL_RATE(984000000, 1, 82, 2, 1, 1, 0),
+ RK3036_PLL_RATE(960000000, 1, 80, 2, 1, 1, 0),
+ RK3036_PLL_RATE(936000000, 1, 78, 2, 1, 1, 0),
+ RK3036_PLL_RATE(912000000, 1, 76, 2, 1, 1, 0),
+ RK3036_PLL_RATE(900000000, 4, 300, 2, 1, 1, 0),
+ RK3036_PLL_RATE(888000000, 1, 74, 2, 1, 1, 0),
+ RK3036_PLL_RATE(864000000, 1, 72, 2, 1, 1, 0),
+ RK3036_PLL_RATE(840000000, 1, 70, 2, 1, 1, 0),
+ RK3036_PLL_RATE(816000000, 1, 68, 2, 1, 1, 0),
+ RK3036_PLL_RATE(800000000, 6, 400, 2, 1, 1, 0),
+ RK3036_PLL_RATE(700000000, 6, 350, 2, 1, 1, 0),
+ RK3036_PLL_RATE(696000000, 1, 58, 2, 1, 1, 0),
+ RK3036_PLL_RATE(600000000, 1, 75, 3, 1, 1, 0),
+ RK3036_PLL_RATE(594000000, 2, 99, 2, 1, 1, 0),
+ RK3036_PLL_RATE(504000000, 1, 63, 3, 1, 1, 0),
+ RK3036_PLL_RATE(500000000, 6, 250, 2, 1, 1, 0),
+ RK3036_PLL_RATE(408000000, 1, 68, 2, 2, 1, 0),
+ RK3036_PLL_RATE(312000000, 1, 52, 2, 2, 1, 0),
+ RK3036_PLL_RATE(216000000, 1, 72, 4, 2, 1, 0),
+ RK3036_PLL_RATE(96000000, 1, 64, 4, 4, 1, 0),
+ { /* sentinel */ },
+};
+
+static struct rockchip_pll_rate_table rk3328_pll_frac_rates[] = {
+ /* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
+ RK3036_PLL_RATE(1016064000, 3, 127, 1, 1, 0, 134217),
+ /* vco = 1016064000 */
+ RK3036_PLL_RATE(983040000, 24, 983, 1, 1, 0, 671088),
+ /* vco = 983040000 */
+ RK3036_PLL_RATE(491520000, 24, 983, 2, 1, 0, 671088),
+ /* vco = 983040000 */
+ RK3036_PLL_RATE(61440000, 6, 215, 7, 2, 0, 671088),
+ /* vco = 860156000 */
+ RK3036_PLL_RATE(56448000, 12, 451, 4, 4, 0, 9797894),
+ /* vco = 903168000 */
+ RK3036_PLL_RATE(40960000, 12, 409, 4, 5, 0, 10066329),
+ /* vco = 819200000 */
+ { /* sentinel */ },
+};
+
+#define RK3328_DIV_ACLKM_MASK 0x7
+#define RK3328_DIV_ACLKM_SHIFT 4
+#define RK3328_DIV_PCLK_DBG_MASK 0xf
+#define RK3328_DIV_PCLK_DBG_SHIFT 0
+
+#define RK3328_CLKSEL1(_aclk_core, _pclk_dbg) \
+{ \
+ .reg = RK3328_CLKSEL_CON(1), \
+ .val = HIWORD_UPDATE(_aclk_core, RK3328_DIV_ACLKM_MASK, \
+ RK3328_DIV_ACLKM_SHIFT) | \
+ HIWORD_UPDATE(_pclk_dbg, RK3328_DIV_PCLK_DBG_MASK, \
+ RK3328_DIV_PCLK_DBG_SHIFT), \
+}
+
+#define RK3328_CPUCLK_RATE(_prate, _aclk_core, _pclk_dbg) \
+{ \
+ .prate = _prate, \
+ .divs = { \
+ RK3328_CLKSEL1(_aclk_core, _pclk_dbg), \
+ }, \
+}
+
+static struct rockchip_cpuclk_rate_table rk3328_cpuclk_rates[] __initdata = {
+ RK3328_CPUCLK_RATE(1800000000, 1, 7),
+ RK3328_CPUCLK_RATE(1704000000, 1, 7),
+ RK3328_CPUCLK_RATE(1608000000, 1, 7),
+ RK3328_CPUCLK_RATE(1512000000, 1, 7),
+ RK3328_CPUCLK_RATE(1488000000, 1, 5),
+ RK3328_CPUCLK_RATE(1416000000, 1, 5),
+ RK3328_CPUCLK_RATE(1392000000, 1, 5),
+ RK3328_CPUCLK_RATE(1296000000, 1, 5),
+ RK3328_CPUCLK_RATE(1200000000, 1, 5),
+ RK3328_CPUCLK_RATE(1104000000, 1, 5),
+ RK3328_CPUCLK_RATE(1008000000, 1, 5),
+ RK3328_CPUCLK_RATE(912000000, 1, 5),
+ RK3328_CPUCLK_RATE(816000000, 1, 3),
+ RK3328_CPUCLK_RATE(696000000, 1, 3),
+ RK3328_CPUCLK_RATE(600000000, 1, 3),
+ RK3328_CPUCLK_RATE(408000000, 1, 1),
+ RK3328_CPUCLK_RATE(312000000, 1, 1),
+ RK3328_CPUCLK_RATE(216000000, 1, 1),
+ RK3328_CPUCLK_RATE(96000000, 1, 1),
+};
+
+static const struct rockchip_cpuclk_reg_data rk3328_cpuclk_data = {
+ .core_reg = RK3328_CLKSEL_CON(0),
+ .div_core_shift = 0,
+ .div_core_mask = 0x1f,
+ .mux_core_alt = 1,
+ .mux_core_main = 3,
+ .mux_core_shift = 6,
+ .mux_core_mask = 0x3,
+};
+
+PNAME(mux_pll_p) = { "xin24m" };
+
+PNAME(mux_2plls_p) = { "cpll", "gpll" };
+PNAME(mux_gpll_cpll_p) = { "gpll", "cpll" };
+PNAME(mux_cpll_gpll_apll_p) = { "cpll", "gpll", "apll" };
+PNAME(mux_2plls_xin24m_p) = { "cpll", "gpll", "xin24m" };
+PNAME(mux_2plls_hdmiphy_p) = { "cpll", "gpll",
+ "dummy_hdmiphy" };
+PNAME(mux_4plls_p) = { "cpll", "gpll",
+ "dummy_hdmiphy",
+ "usb480m" };
+PNAME(mux_2plls_u480m_p) = { "cpll", "gpll",
+ "usb480m" };
+PNAME(mux_2plls_24m_u480m_p) = { "cpll", "gpll",
+ "xin24m", "usb480m" };
+
+PNAME(mux_ddrphy_p) = { "dpll", "apll", "cpll" };
+PNAME(mux_armclk_p) = { "apll_core",
+ "gpll_core",
+ "dpll_core",
+ "npll_core"};
+PNAME(mux_hdmiphy_p) = { "hdmi_phy", "xin24m" };
+PNAME(mux_usb480m_p) = { "usb480m_phy",
+ "xin24m" };
+
+PNAME(mux_i2s0_p) = { "clk_i2s0_div",
+ "clk_i2s0_frac",
+ "xin12m",
+ "xin12m" };
+PNAME(mux_i2s1_p) = { "clk_i2s1_div",
+ "clk_i2s1_frac",
+ "clkin_i2s1",
+ "xin12m" };
+PNAME(mux_i2s2_p) = { "clk_i2s2_div",
+ "clk_i2s2_frac",
+ "clkin_i2s2",
+ "xin12m" };
+PNAME(mux_i2s1out_p) = { "clk_i2s1", "xin12m"};
+PNAME(mux_i2s2out_p) = { "clk_i2s2", "xin12m" };
+PNAME(mux_spdif_p) = { "clk_spdif_div",
+ "clk_spdif_frac",
+ "xin12m",
+ "xin12m" };
+PNAME(mux_uart0_p) = { "clk_uart0_div",
+ "clk_uart0_frac",
+ "xin24m" };
+PNAME(mux_uart1_p) = { "clk_uart1_div",
+ "clk_uart1_frac",
+ "xin24m" };
+PNAME(mux_uart2_p) = { "clk_uart2_div",
+ "clk_uart2_frac",
+ "xin24m" };
+
+PNAME(mux_sclk_cif_p) = { "clk_cif_src",
+ "xin24m" };
+PNAME(mux_dclk_lcdc_p) = { "hdmiphy",
+ "dclk_lcdc_src" };
+PNAME(mux_aclk_peri_pre_p) = { "cpll_peri",
+ "gpll_peri",
+ "hdmiphy_peri" };
+PNAME(mux_ref_usb3otg_src_p) = { "xin24m",
+ "clk_usb3otg_ref" };
+PNAME(mux_xin24m_32k_p) = { "xin24m",
+ "clk_rtc32k" };
+PNAME(mux_mac2io_src_p) = { "clk_mac2io_src",
+ "gmac_clkin" };
+PNAME(mux_mac2phy_src_p) = { "clk_mac2phy_src",
+ "phy_50m_out" };
+
+static struct rockchip_pll_clock rk3328_pll_clks[] __initdata = {
+ [apll] = PLL(pll_rk3328, PLL_APLL, "apll", mux_pll_p,
+ 0, RK3328_PLL_CON(0),
+ RK3328_MODE_CON, 0, 4, 0, rk3328_pll_frac_rates),
+ [dpll] = PLL(pll_rk3328, PLL_DPLL, "dpll", mux_pll_p,
+ 0, RK3328_PLL_CON(8),
+ RK3328_MODE_CON, 4, 3, 0, NULL),
+ [cpll] = PLL(pll_rk3328, PLL_CPLL, "cpll", mux_pll_p,
+ 0, RK3328_PLL_CON(16),
+ RK3328_MODE_CON, 8, 2, 0, rk3328_pll_rates),
+ [gpll] = PLL(pll_rk3328, PLL_GPLL, "gpll", mux_pll_p,
+ 0, RK3328_PLL_CON(24),
+ RK3328_MODE_CON, 12, 1, 0, rk3328_pll_frac_rates),
+ [npll] = PLL(pll_rk3328, PLL_NPLL, "npll", mux_pll_p,
+ 0, RK3328_PLL_CON(40),
+ RK3328_MODE_CON, 1, 0, 0, rk3328_pll_rates),
+};
+
+#define MFLAGS CLK_MUX_HIWORD_MASK
+#define DFLAGS CLK_DIVIDER_HIWORD_MASK
+#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
+
+static struct rockchip_clk_branch rk3328_i2s0_fracmux __initdata =
+ MUX(0, "i2s0_pre", mux_i2s0_p, CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(6), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk3328_i2s1_fracmux __initdata =
+ MUX(0, "i2s1_pre", mux_i2s1_p, CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(8), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk3328_i2s2_fracmux __initdata =
+ MUX(0, "i2s2_pre", mux_i2s2_p, CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(10), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk3328_spdif_fracmux __initdata =
+ MUX(SCLK_SPDIF, "sclk_spdif", mux_spdif_p, CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(12), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk3328_uart0_fracmux __initdata =
+ MUX(SCLK_UART0, "sclk_uart0", mux_uart0_p, CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(14), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk3328_uart1_fracmux __initdata =
+ MUX(SCLK_UART1, "sclk_uart1", mux_uart1_p, CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(16), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk3328_uart2_fracmux __initdata =
+ MUX(SCLK_UART2, "sclk_uart2", mux_uart2_p, CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(18), 8, 2, MFLAGS);
+
+static struct rockchip_clk_branch rk3328_clk_branches[] __initdata = {
+ /*
+ * Clock-Architecture Diagram 1
+ */
+
+ DIV(0, "clk_24m", "xin24m", CLK_IGNORE_UNUSED,
+ RK3328_CLKSEL_CON(2), 8, 5, DFLAGS),
+ COMPOSITE(SCLK_RTC32K, "clk_rtc32k", mux_2plls_xin24m_p, 0,
+ RK3328_CLKSEL_CON(38), 14, 2, MFLAGS, 0, 14, DFLAGS,
+ RK3328_CLKGATE_CON(0), 11, GFLAGS),
+
+ /* PD_MISC */
+ MUX(HDMIPHY, "hdmiphy", mux_hdmiphy_p, CLK_SET_RATE_PARENT,
+ RK3328_MISC_CON, 13, 1, MFLAGS),
+ MUX(USB480M, "usb480m", mux_usb480m_p, CLK_SET_RATE_PARENT,
+ RK3328_MISC_CON, 15, 1, MFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 2
+ */
+
+ /* PD_CORE */
+ GATE(0, "apll_core", "apll", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(0), 0, GFLAGS),
+ GATE(0, "gpll_core", "gpll", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(0), 2, GFLAGS),
+ GATE(0, "dpll_core", "dpll", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(0), 1, GFLAGS),
+ GATE(0, "npll_core", "npll", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(0), 12, GFLAGS),
+ COMPOSITE_NOMUX(0, "pclk_dbg", "armclk", CLK_IGNORE_UNUSED,
+ RK3328_CLKSEL_CON(1), 0, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
+ RK3328_CLKGATE_CON(7), 0, GFLAGS),
+ COMPOSITE_NOMUX(0, "aclk_core", "armclk", CLK_IGNORE_UNUSED,
+ RK3328_CLKSEL_CON(1), 4, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
+ RK3328_CLKGATE_CON(7), 1, GFLAGS),
+ GATE(0, "aclk_core_niu", "aclk_core", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(13), 0, GFLAGS),
+ GATE(0, "aclk_gic400", "aclk_core", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(13), 1, GFLAGS),
+
+ GATE(0, "clk_jtag", "jtag_clkin", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(7), 2, GFLAGS),
+
+ /* PD_GPU */
+ COMPOSITE(0, "aclk_gpu_pre", mux_4plls_p, 0,
+ RK3328_CLKSEL_CON(44), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3328_CLKGATE_CON(6), 6, GFLAGS),
+ GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", CLK_SET_RATE_PARENT,
+ RK3328_CLKGATE_CON(14), 0, GFLAGS),
+ GATE(0, "aclk_gpu_niu", "aclk_gpu_pre", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(14), 1, GFLAGS),
+
+ /* PD_DDR */
+ COMPOSITE(0, "clk_ddr", mux_ddrphy_p, CLK_IGNORE_UNUSED,
+ RK3328_CLKSEL_CON(3), 8, 2, MFLAGS, 0, 3, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
+ RK3328_CLKGATE_CON(0), 4, GFLAGS),
+ GATE(0, "clk_ddrmsch", "clk_ddr", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(18), 6, GFLAGS),
+ GATE(0, "clk_ddrupctl", "clk_ddr", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(18), 5, GFLAGS),
+ GATE(0, "aclk_ddrupctl", "clk_ddr", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(18), 4, GFLAGS),
+ GATE(0, "clk_ddrmon", "xin24m", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(0), 6, GFLAGS),
+
+ COMPOSITE(PCLK_DDR, "pclk_ddr", mux_2plls_hdmiphy_p, 0,
+ RK3328_CLKSEL_CON(4), 13, 2, MFLAGS, 8, 3, DFLAGS,
+ RK3328_CLKGATE_CON(7), 4, GFLAGS),
+ GATE(0, "pclk_ddrupctl", "pclk_ddr", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(18), 1, GFLAGS),
+ GATE(0, "pclk_ddr_msch", "pclk_ddr", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(18), 2, GFLAGS),
+ GATE(0, "pclk_ddr_mon", "pclk_ddr", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(18), 3, GFLAGS),
+ GATE(0, "pclk_ddrstdby", "pclk_ddr", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(18), 7, GFLAGS),
+ GATE(0, "pclk_ddr_grf", "pclk_ddr", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(18), 9, GFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 3
+ */
+
+ /* PD_BUS */
+ COMPOSITE(ACLK_BUS_PRE, "aclk_bus_pre", mux_2plls_hdmiphy_p, 0,
+ RK3328_CLKSEL_CON(0), 13, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3328_CLKGATE_CON(8), 0, GFLAGS),
+ COMPOSITE_NOMUX(HCLK_BUS_PRE, "hclk_bus_pre", "aclk_bus_pre", 0,
+ RK3328_CLKSEL_CON(1), 8, 2, DFLAGS,
+ RK3328_CLKGATE_CON(8), 1, GFLAGS),
+ COMPOSITE_NOMUX(PCLK_BUS_PRE, "pclk_bus_pre", "aclk_bus_pre", 0,
+ RK3328_CLKSEL_CON(1), 12, 3, DFLAGS,
+ RK3328_CLKGATE_CON(8), 2, GFLAGS),
+ GATE(0, "pclk_bus", "pclk_bus_pre", 0,
+ RK3328_CLKGATE_CON(8), 3, GFLAGS),
+ GATE(0, "pclk_phy_pre", "pclk_bus_pre", 0,
+ RK3328_CLKGATE_CON(8), 4, GFLAGS),
+
+ COMPOSITE(SCLK_TSP, "clk_tsp", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(21), 15, 1, MFLAGS, 8, 5, DFLAGS,
+ RK3328_CLKGATE_CON(2), 5, GFLAGS),
+ GATE(0, "clk_hsadc_tsp", "ext_gpio3a2", 0,
+ RK3328_CLKGATE_CON(17), 13, GFLAGS),
+
+ /* PD_I2S */
+ COMPOSITE(0, "clk_i2s0_div", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(6), 15, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3328_CLKGATE_CON(1), 1, GFLAGS),
+ COMPOSITE_FRACMUX(0, "clk_i2s0_frac", "clk_i2s0_div", CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(7), 0,
+ RK3328_CLKGATE_CON(1), 2, GFLAGS,
+ &rk3328_i2s0_fracmux),
+ GATE(SCLK_I2S0, "clk_i2s0", "i2s0_pre", CLK_SET_RATE_PARENT,
+ RK3328_CLKGATE_CON(1), 3, GFLAGS),
+
+ COMPOSITE(0, "clk_i2s1_div", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(8), 15, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3328_CLKGATE_CON(1), 4, GFLAGS),
+ COMPOSITE_FRACMUX(0, "clk_i2s1_frac", "clk_i2s1_div", CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(9), 0,
+ RK3328_CLKGATE_CON(1), 5, GFLAGS,
+ &rk3328_i2s1_fracmux),
+ GATE(SCLK_I2S1, "clk_i2s1", "i2s1_pre", CLK_SET_RATE_PARENT,
+ RK3328_CLKGATE_CON(0), 6, GFLAGS),
+ COMPOSITE_NODIV(SCLK_I2S1_OUT, "i2s1_out", mux_i2s1out_p, 0,
+ RK3328_CLKSEL_CON(8), 12, 1, MFLAGS,
+ RK3328_CLKGATE_CON(1), 7, GFLAGS),
+
+ COMPOSITE(0, "clk_i2s2_div", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(10), 15, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3328_CLKGATE_CON(1), 8, GFLAGS),
+ COMPOSITE_FRACMUX(0, "clk_i2s2_frac", "clk_i2s2_div", CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(11), 0,
+ RK3328_CLKGATE_CON(1), 9, GFLAGS,
+ &rk3328_i2s2_fracmux),
+ GATE(SCLK_I2S2, "clk_i2s2", "i2s2_pre", CLK_SET_RATE_PARENT,
+ RK3328_CLKGATE_CON(1), 10, GFLAGS),
+ COMPOSITE_NODIV(SCLK_I2S2_OUT, "i2s2_out", mux_i2s2out_p, 0,
+ RK3328_CLKSEL_CON(10), 12, 1, MFLAGS,
+ RK3328_CLKGATE_CON(1), 11, GFLAGS),
+
+ COMPOSITE(0, "clk_spdif_div", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(12), 15, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3328_CLKGATE_CON(1), 12, GFLAGS),
+ COMPOSITE_FRACMUX(0, "clk_spdif_frac", "clk_spdif_div", CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(13), 0,
+ RK3328_CLKGATE_CON(1), 13, GFLAGS,
+ &rk3328_spdif_fracmux),
+
+ /* PD_UART */
+ COMPOSITE(0, "clk_uart0_div", mux_2plls_u480m_p, 0,
+ RK3328_CLKSEL_CON(14), 12, 2, MFLAGS, 0, 7, DFLAGS,
+ RK3328_CLKGATE_CON(1), 14, GFLAGS),
+ COMPOSITE(0, "clk_uart1_div", mux_2plls_u480m_p, 0,
+ RK3328_CLKSEL_CON(16), 12, 2, MFLAGS, 0, 7, DFLAGS,
+ RK3328_CLKGATE_CON(2), 0, GFLAGS),
+ COMPOSITE(0, "clk_uart2_div", mux_2plls_u480m_p, 0,
+ RK3328_CLKSEL_CON(18), 12, 2, MFLAGS, 0, 7, DFLAGS,
+ RK3328_CLKGATE_CON(2), 2, GFLAGS),
+ COMPOSITE_FRACMUX(0, "clk_uart0_frac", "clk_uart0_div", CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(15), 0,
+ RK3328_CLKGATE_CON(1), 15, GFLAGS,
+ &rk3328_uart0_fracmux),
+ COMPOSITE_FRACMUX(0, "clk_uart1_frac", "clk_uart1_div", CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(17), 0,
+ RK3328_CLKGATE_CON(2), 1, GFLAGS,
+ &rk3328_uart1_fracmux),
+ COMPOSITE_FRACMUX(0, "clk_uart2_frac", "clk_uart2_div", CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(19), 0,
+ RK3328_CLKGATE_CON(2), 3, GFLAGS,
+ &rk3328_uart2_fracmux),
+
+ /*
+ * Clock-Architecture Diagram 4
+ */
+
+ COMPOSITE(SCLK_I2C0, "clk_i2c0", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(34), 7, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3328_CLKGATE_CON(2), 9, GFLAGS),
+ COMPOSITE(SCLK_I2C1, "clk_i2c1", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(34), 15, 1, MFLAGS, 8, 7, DFLAGS,
+ RK3328_CLKGATE_CON(2), 10, GFLAGS),
+ COMPOSITE(SCLK_I2C2, "clk_i2c2", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(35), 7, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3328_CLKGATE_CON(2), 11, GFLAGS),
+ COMPOSITE(SCLK_I2C3, "clk_i2c3", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(35), 15, 1, MFLAGS, 8, 7, DFLAGS,
+ RK3328_CLKGATE_CON(2), 12, GFLAGS),
+ COMPOSITE(SCLK_CRYPTO, "clk_crypto", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(20), 7, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3328_CLKGATE_CON(2), 4, GFLAGS),
+ COMPOSITE_NOMUX(SCLK_TSADC, "clk_tsadc", "clk_24m", 0,
+ RK3328_CLKSEL_CON(22), 0, 10, DFLAGS,
+ RK3328_CLKGATE_CON(2), 6, GFLAGS),
+ COMPOSITE_NOMUX(SCLK_SARADC, "clk_saradc", "clk_24m", 0,
+ RK3328_CLKSEL_CON(23), 0, 10, DFLAGS,
+ RK3328_CLKGATE_CON(2), 14, GFLAGS),
+ COMPOSITE(SCLK_SPI, "clk_spi", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(24), 7, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3328_CLKGATE_CON(2), 7, GFLAGS),
+ COMPOSITE(SCLK_PWM, "clk_pwm", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(24), 15, 1, MFLAGS, 8, 7, DFLAGS,
+ RK3328_CLKGATE_CON(2), 8, GFLAGS),
+ COMPOSITE(SCLK_OTP, "clk_otp", mux_2plls_xin24m_p, 0,
+ RK3328_CLKSEL_CON(4), 6, 2, MFLAGS, 0, 6, DFLAGS,
+ RK3328_CLKGATE_CON(3), 8, GFLAGS),
+ COMPOSITE(SCLK_EFUSE, "clk_efuse", mux_2plls_xin24m_p, 0,
+ RK3328_CLKSEL_CON(5), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3328_CLKGATE_CON(2), 13, GFLAGS),
+ COMPOSITE(SCLK_PDM, "clk_pdm", mux_cpll_gpll_apll_p, CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(20), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3328_CLKGATE_CON(2), 15, GFLAGS),
+
+ GATE(SCLK_TIMER0, "sclk_timer0", "xin24m", 0,
+ RK3328_CLKGATE_CON(8), 5, GFLAGS),
+ GATE(SCLK_TIMER1, "sclk_timer1", "xin24m", 0,
+ RK3328_CLKGATE_CON(8), 6, GFLAGS),
+ GATE(SCLK_TIMER2, "sclk_timer2", "xin24m", 0,
+ RK3328_CLKGATE_CON(8), 7, GFLAGS),
+ GATE(SCLK_TIMER3, "sclk_timer3", "xin24m", 0,
+ RK3328_CLKGATE_CON(8), 8, GFLAGS),
+ GATE(SCLK_TIMER4, "sclk_timer4", "xin24m", 0,
+ RK3328_CLKGATE_CON(8), 9, GFLAGS),
+ GATE(SCLK_TIMER5, "sclk_timer5", "xin24m", 0,
+ RK3328_CLKGATE_CON(8), 10, GFLAGS),
+
+ COMPOSITE(SCLK_WIFI, "clk_wifi", mux_2plls_u480m_p, 0,
+ RK3328_CLKSEL_CON(52), 6, 2, MFLAGS, 0, 6, DFLAGS,
+ RK3328_CLKGATE_CON(0), 10, GFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 5
+ */
+
+ /* PD_VIDEO */
+ COMPOSITE(ACLK_RKVDEC_PRE, "aclk_rkvdec_pre", mux_4plls_p, 0,
+ RK3328_CLKSEL_CON(48), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3328_CLKGATE_CON(6), 0, GFLAGS),
+ FACTOR_GATE(HCLK_RKVDEC_PRE, "hclk_rkvdec_pre", "aclk_rkvdec_pre", 0, 1, 4,
+ RK3328_CLKGATE_CON(11), 0, GFLAGS),
+ GATE(ACLK_RKVDEC, "aclk_rkvdec", "aclk_rkvdec_pre", CLK_SET_RATE_PARENT,
+ RK3328_CLKGATE_CON(24), 0, GFLAGS),
+ GATE(HCLK_RKVDEC, "hclk_rkvdec", "hclk_rkvdec_pre", CLK_SET_RATE_PARENT,
+ RK3328_CLKGATE_CON(24), 1, GFLAGS),
+ GATE(0, "aclk_rkvdec_niu", "aclk_rkvdec_pre", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(24), 2, GFLAGS),
+ GATE(0, "hclk_rkvdec_niu", "hclk_rkvdec_pre", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(24), 3, GFLAGS),
+
+ COMPOSITE(SCLK_VDEC_CABAC, "sclk_vdec_cabac", mux_4plls_p, 0,
+ RK3328_CLKSEL_CON(48), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3328_CLKGATE_CON(6), 1, GFLAGS),
+
+ COMPOSITE(SCLK_VDEC_CORE, "sclk_vdec_core", mux_4plls_p, 0,
+ RK3328_CLKSEL_CON(49), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3328_CLKGATE_CON(6), 2, GFLAGS),
+
+ COMPOSITE(ACLK_VPU_PRE, "aclk_vpu_pre", mux_4plls_p, 0,
+ RK3328_CLKSEL_CON(50), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3328_CLKGATE_CON(6), 5, GFLAGS),
+ FACTOR_GATE(HCLK_VPU_PRE, "hclk_vpu_pre", "aclk_vpu_pre", 0, 1, 4,
+ RK3328_CLKGATE_CON(11), 8, GFLAGS),
+ GATE(ACLK_VPU, "aclk_vpu", "aclk_vpu_pre", CLK_SET_RATE_PARENT,
+ RK3328_CLKGATE_CON(23), 0, GFLAGS),
+ GATE(HCLK_VPU, "hclk_vpu", "hclk_vpu_pre", CLK_SET_RATE_PARENT,
+ RK3328_CLKGATE_CON(23), 1, GFLAGS),
+ GATE(0, "aclk_vpu_niu", "aclk_vpu_pre", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(23), 2, GFLAGS),
+ GATE(0, "hclk_vpu_niu", "hclk_vpu_pre", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(23), 3, GFLAGS),
+
+ COMPOSITE(ACLK_RKVENC, "aclk_rkvenc", mux_4plls_p, 0,
+ RK3328_CLKSEL_CON(51), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3328_CLKGATE_CON(6), 3, GFLAGS),
+ FACTOR_GATE(HCLK_RKVENC, "hclk_rkvenc", "aclk_rkvenc", 0, 1, 4,
+ RK3328_CLKGATE_CON(11), 4, GFLAGS),
+ GATE(0, "aclk_rkvenc_niu", "aclk_rkvenc", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(25), 0, GFLAGS),
+ GATE(0, "hclk_rkvenc_niu", "hclk_rkvenc", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(25), 1, GFLAGS),
+ GATE(ACLK_H265, "aclk_h265", "aclk_rkvenc", 0,
+ RK3328_CLKGATE_CON(25), 0, GFLAGS),
+ GATE(PCLK_H265, "pclk_h265", "hclk_rkvenc", 0,
+ RK3328_CLKGATE_CON(25), 1, GFLAGS),
+ GATE(ACLK_H264, "aclk_h264", "aclk_rkvenc", 0,
+ RK3328_CLKGATE_CON(25), 0, GFLAGS),
+ GATE(HCLK_H264, "hclk_h264", "hclk_rkvenc", 0,
+ RK3328_CLKGATE_CON(25), 1, GFLAGS),
+ GATE(ACLK_AXISRAM, "aclk_axisram", "aclk_rkvenc", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(25), 0, GFLAGS),
+
+ COMPOSITE(SCLK_VENC_CORE, "sclk_venc_core", mux_4plls_p, 0,
+ RK3328_CLKSEL_CON(51), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3328_CLKGATE_CON(6), 4, GFLAGS),
+
+ COMPOSITE(SCLK_VENC_DSP, "sclk_venc_dsp", mux_4plls_p, 0,
+ RK3328_CLKSEL_CON(52), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3328_CLKGATE_CON(6), 7, GFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 6
+ */
+
+ /* PD_VIO */
+ COMPOSITE(ACLK_VIO_PRE, "aclk_vio_pre", mux_4plls_p, 0,
+ RK3328_CLKSEL_CON(37), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3328_CLKGATE_CON(5), 2, GFLAGS),
+ DIV(HCLK_VIO_PRE, "hclk_vio_pre", "aclk_vio_pre", 0,
+ RK3328_CLKSEL_CON(37), 8, 5, DFLAGS),
+
+ COMPOSITE(ACLK_RGA_PRE, "aclk_rga_pre", mux_4plls_p, 0,
+ RK3328_CLKSEL_CON(36), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3328_CLKGATE_CON(5), 0, GFLAGS),
+ COMPOSITE(SCLK_RGA, "clk_rga", mux_4plls_p, 0,
+ RK3328_CLKSEL_CON(36), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3328_CLKGATE_CON(5), 1, GFLAGS),
+ COMPOSITE(ACLK_VOP_PRE, "aclk_vop_pre", mux_4plls_p, 0,
+ RK3328_CLKSEL_CON(39), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3328_CLKGATE_CON(5), 5, GFLAGS),
+ GATE(0, "clk_hdmi_sfc", "xin24m", 0,
+ RK3328_CLKGATE_CON(5), 4, GFLAGS),
+
+ COMPOSITE_NODIV(0, "clk_cif_src", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(42), 7, 1, MFLAGS,
+ RK3328_CLKGATE_CON(5), 3, GFLAGS),
+ COMPOSITE_NOGATE(SCLK_CIF_OUT, "clk_cif_out", mux_sclk_cif_p, CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(42), 5, 1, MFLAGS, 0, 5, DFLAGS),
+
+ COMPOSITE(DCLK_LCDC_SRC, "dclk_lcdc_src", mux_gpll_cpll_p, 0,
+ RK3328_CLKSEL_CON(40), 0, 1, MFLAGS, 8, 8, DFLAGS,
+ RK3328_CLKGATE_CON(5), 6, GFLAGS),
+ DIV(DCLK_HDMIPHY, "dclk_hdmiphy", "dclk_lcdc_src", 0,
+ RK3328_CLKSEL_CON(40), 3, 3, DFLAGS),
+ MUX(DCLK_LCDC, "dclk_lcdc", mux_dclk_lcdc_p, 0,
+ RK3328_CLKSEL_CON(40), 1, 1, MFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 7
+ */
+
+ /* PD_PERI */
+ GATE(0, "gpll_peri", "gpll", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(4), 0, GFLAGS),
+ GATE(0, "cpll_peri", "cpll", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(4), 1, GFLAGS),
+ GATE(0, "hdmiphy_peri", "hdmiphy", CLK_IGNORE_UNUSED,
+ RK3328_CLKGATE_CON(4), 2, GFLAGS),
+ COMPOSITE_NOGATE(ACLK_PERI_PRE, "aclk_peri_pre", mux_aclk_peri_pre_p, 0,
+ RK3328_CLKSEL_CON(28), 6, 2, MFLAGS, 0, 5, DFLAGS),
+ COMPOSITE_NOMUX(PCLK_PERI, "pclk_peri", "aclk_peri_pre", CLK_IGNORE_UNUSED,
+ RK3328_CLKSEL_CON(29), 0, 2, DFLAGS,
+ RK3328_CLKGATE_CON(10), 2, GFLAGS),
+ COMPOSITE_NOMUX(HCLK_PERI, "hclk_peri", "aclk_peri_pre", CLK_IGNORE_UNUSED,
+ RK3328_CLKSEL_CON(29), 4, 3, DFLAGS,
+ RK3328_CLKGATE_CON(10), 1, GFLAGS),
+ GATE(ACLK_PERI, "aclk_peri", "aclk_peri_pre", CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT,
+ RK3328_CLKGATE_CON(10), 0, GFLAGS),
+
+ COMPOSITE(SCLK_SDMMC, "clk_sdmmc", mux_2plls_24m_u480m_p, 0,
+ RK3328_CLKSEL_CON(30), 8, 2, MFLAGS, 0, 8, DFLAGS,
+ RK3328_CLKGATE_CON(4), 3, GFLAGS),
+
+ COMPOSITE(SCLK_SDIO, "clk_sdio", mux_2plls_24m_u480m_p, 0,
+ RK3328_CLKSEL_CON(31), 8, 2, MFLAGS, 0, 8, DFLAGS,
+ RK3328_CLKGATE_CON(4), 4, GFLAGS),
+
+ COMPOSITE(SCLK_EMMC, "clk_emmc", mux_2plls_24m_u480m_p, 0,
+ RK3328_CLKSEL_CON(32), 8, 2, MFLAGS, 0, 8, DFLAGS,
+ RK3328_CLKGATE_CON(4), 5, GFLAGS),
+
+ COMPOSITE(SCLK_SDMMC_EXT, "clk_sdmmc_ext", mux_2plls_24m_u480m_p, 0,
+ RK3328_CLKSEL_CON(43), 8, 2, MFLAGS, 0, 8, DFLAGS,
+ RK3328_CLKGATE_CON(4), 10, GFLAGS),
+
+ COMPOSITE(SCLK_REF_USB3OTG_SRC, "clk_ref_usb3otg_src", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(45), 7, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3328_CLKGATE_CON(4), 9, GFLAGS),
+
+ MUX(SCLK_REF_USB3OTG, "clk_ref_usb3otg", mux_ref_usb3otg_src_p, CLK_SET_RATE_PARENT,
+ RK3328_CLKSEL_CON(45), 8, 1, MFLAGS),
+
+ GATE(SCLK_USB3OTG_REF, "clk_usb3otg_ref", "xin24m", 0,
+ RK3328_CLKGATE_CON(4), 7, GFLAGS),
+
+ COMPOSITE(SCLK_USB3OTG_SUSPEND, "clk_usb3otg_suspend", mux_xin24m_32k_p, 0,
+ RK3328_CLKSEL_CON(33), 15, 1, MFLAGS, 0, 10, DFLAGS,
+ RK3328_CLKGATE_CON(4), 8, GFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 8
+ */
+
+ /* PD_GMAC */
+ COMPOSITE(ACLK_GMAC, "aclk_gmac", mux_2plls_hdmiphy_p, 0,
+ RK3328_CLKSEL_CON(35), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3328_CLKGATE_CON(3), 2, GFLAGS),
+ COMPOSITE_NOMUX(PCLK_GMAC, "pclk_gmac", "aclk_gmac", 0,
+ RK3328_CLKSEL_CON(25), 8, 3, DFLAGS,
+ RK3328_CLKGATE_CON(9), 0, GFLAGS),
+
+ COMPOSITE(SCLK_MAC2IO_SRC, "clk_mac2io_src", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(27), 7, 1, MFLAGS, 0, 5, DFLAGS,
+ RK3328_CLKGATE_CON(3), 1, GFLAGS),
+ GATE(SCLK_MAC2IO_REF, "clk_mac2io_ref", "clk_mac2io", 0,
+ RK3328_CLKGATE_CON(9), 7, GFLAGS),
+ GATE(SCLK_MAC2IO_RX, "clk_mac2io_rx", "clk_mac2io", 0,
+ RK3328_CLKGATE_CON(9), 4, GFLAGS),
+ GATE(SCLK_MAC2IO_TX, "clk_mac2io_tx", "clk_mac2io", 0,
+ RK3328_CLKGATE_CON(9), 5, GFLAGS),
+ GATE(SCLK_MAC2IO_REFOUT, "clk_mac2io_refout", "clk_mac2io", 0,
+ RK3328_CLKGATE_CON(9), 6, GFLAGS),
+ COMPOSITE(SCLK_MAC2IO_OUT, "clk_mac2io_out", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(27), 15, 1, MFLAGS, 8, 5, DFLAGS,
+ RK3328_CLKGATE_CON(3), 5, GFLAGS),
+
+ COMPOSITE(SCLK_MAC2PHY_SRC, "clk_mac2phy_src", mux_2plls_p, 0,
+ RK3328_CLKSEL_CON(26), 7, 1, MFLAGS, 0, 5, DFLAGS,
+ RK3328_CLKGATE_CON(3), 0, GFLAGS),
+ GATE(SCLK_MAC2PHY_REF, "clk_mac2phy_ref", "clk_mac2phy", 0,
+ RK3328_CLKGATE_CON(9), 3, GFLAGS),
+ GATE(SCLK_MAC2PHY_RXTX, "clk_mac2phy_rxtx", "clk_mac2phy", 0,
+ RK3328_CLKGATE_CON(9), 1, GFLAGS),
+ COMPOSITE_NOMUX(SCLK_MAC2PHY_OUT, "clk_mac2phy_out", "clk_mac2phy", 0,
+ RK3328_CLKSEL_CON(26), 8, 2, DFLAGS,
+ RK3328_CLKGATE_CON(9), 2, GFLAGS),
+
+ FACTOR(0, "xin12m", "xin24m", 0, 1, 2),
+
+ /*
+ * Clock-Architecture Diagram 9
+ */
+
+ /* PD_VOP */
+ GATE(ACLK_RGA, "aclk_rga", "aclk_rga_pre", 0, RK3328_CLKGATE_CON(21), 10, GFLAGS),
+ GATE(0, "aclk_rga_niu", "aclk_rga_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(22), 3, GFLAGS),
+ GATE(ACLK_VOP, "aclk_vop", "aclk_vop_pre", 0, RK3328_CLKGATE_CON(21), 2, GFLAGS),
+ GATE(0, "aclk_vop_niu", "aclk_vop_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(21), 4, GFLAGS),
+
+ GATE(ACLK_IEP, "aclk_iep", "aclk_vio_pre", 0, RK3328_CLKGATE_CON(21), 6, GFLAGS),
+ GATE(ACLK_CIF, "aclk_cif", "aclk_vio_pre", 0, RK3328_CLKGATE_CON(21), 8, GFLAGS),
+ GATE(ACLK_HDCP, "aclk_hdcp", "aclk_vio_pre", 0, RK3328_CLKGATE_CON(21), 15, GFLAGS),
+ GATE(0, "aclk_vio_niu", "aclk_vio_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(22), 2, GFLAGS),
+
+ GATE(HCLK_VOP, "hclk_vop", "hclk_vio_pre", 0, RK3328_CLKGATE_CON(21), 3, GFLAGS),
+ GATE(0, "hclk_vop_niu", "hclk_vio_pre", 0, RK3328_CLKGATE_CON(21), 5, GFLAGS),
+ GATE(HCLK_IEP, "hclk_iep", "hclk_vio_pre", 0, RK3328_CLKGATE_CON(21), 7, GFLAGS),
+ GATE(HCLK_CIF, "hclk_cif", "hclk_vio_pre", 0, RK3328_CLKGATE_CON(21), 9, GFLAGS),
+ GATE(HCLK_RGA, "hclk_rga", "hclk_vio_pre", 0, RK3328_CLKGATE_CON(21), 11, GFLAGS),
+ GATE(0, "hclk_ahb1tom", "hclk_vio_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(21), 12, GFLAGS),
+ GATE(0, "pclk_vio_h2p", "hclk_vio_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(21), 13, GFLAGS),
+ GATE(0, "hclk_vio_h2p", "hclk_vio_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(21), 14, GFLAGS),
+ GATE(HCLK_HDCP, "hclk_hdcp", "hclk_vio_pre", 0, RK3328_CLKGATE_CON(22), 0, GFLAGS),
+ GATE(HCLK_VIO, "hclk_vio", "hclk_vio_pre", 0, RK3328_CLKGATE_CON(22), 1, GFLAGS),
+ GATE(PCLK_HDMI, "pclk_hdmi", "hclk_vio_pre", 0, RK3328_CLKGATE_CON(22), 4, GFLAGS),
+ GATE(PCLK_HDCP, "pclk_hdcp", "hclk_vio_pre", 0, RK3328_CLKGATE_CON(22), 5, GFLAGS),
+
+ /* PD_PERI */
+ GATE(0, "aclk_peri_noc", "aclk_peri", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(19), 11, GFLAGS),
+ GATE(ACLK_USB3OTG, "aclk_usb3otg", "aclk_peri", 0, RK3328_CLKGATE_CON(19), 4, GFLAGS),
+
+ GATE(HCLK_SDMMC, "hclk_sdmmc", "hclk_peri", 0, RK3328_CLKGATE_CON(19), 0, GFLAGS),
+ GATE(HCLK_SDIO, "hclk_sdio", "hclk_peri", 0, RK3328_CLKGATE_CON(19), 1, GFLAGS),
+ GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK3328_CLKGATE_CON(19), 2, GFLAGS),
+ GATE(HCLK_SDMMC_EXT, "hclk_sdmmc_ext", "hclk_peri", 0, RK3328_CLKGATE_CON(19), 15, GFLAGS),
+ GATE(HCLK_HOST0, "hclk_host0", "hclk_peri", 0, RK3328_CLKGATE_CON(19), 6, GFLAGS),
+ GATE(HCLK_HOST0_ARB, "hclk_host0_arb", "hclk_peri", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(19), 7, GFLAGS),
+ GATE(HCLK_OTG, "hclk_otg", "hclk_peri", 0, RK3328_CLKGATE_CON(19), 8, GFLAGS),
+ GATE(HCLK_OTG_PMU, "hclk_otg_pmu", "hclk_peri", 0, RK3328_CLKGATE_CON(19), 9, GFLAGS),
+ GATE(0, "hclk_peri_niu", "hclk_peri", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(19), 12, GFLAGS),
+ GATE(0, "pclk_peri_niu", "hclk_peri", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(19), 13, GFLAGS),
+
+ /* PD_GMAC */
+ GATE(ACLK_MAC2PHY, "aclk_mac2phy", "aclk_gmac", 0, RK3328_CLKGATE_CON(26), 0, GFLAGS),
+ GATE(ACLK_MAC2IO, "aclk_mac2io", "aclk_gmac", 0, RK3328_CLKGATE_CON(26), 2, GFLAGS),
+ GATE(0, "aclk_gmac_niu", "aclk_gmac", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(26), 4, GFLAGS),
+ GATE(PCLK_MAC2PHY, "pclk_mac2phy", "pclk_gmac", 0, RK3328_CLKGATE_CON(26), 1, GFLAGS),
+ GATE(PCLK_MAC2IO, "pclk_mac2io", "pclk_gmac", 0, RK3328_CLKGATE_CON(26), 3, GFLAGS),
+ GATE(0, "pclk_gmac_niu", "pclk_gmac", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(26), 5, GFLAGS),
+
+ /* PD_BUS */
+ GATE(0, "aclk_bus_niu", "aclk_bus_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(15), 12, GFLAGS),
+ GATE(ACLK_DCF, "aclk_dcf", "aclk_bus_pre", 0, RK3328_CLKGATE_CON(15), 11, GFLAGS),
+ GATE(ACLK_TSP, "aclk_tsp", "aclk_bus_pre", 0, RK3328_CLKGATE_CON(17), 12, GFLAGS),
+ GATE(0, "aclk_intmem", "aclk_bus_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(15), 0, GFLAGS),
+ GATE(ACLK_DMAC, "aclk_dmac_bus", "aclk_bus_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(15), 1, GFLAGS),
+
+ GATE(0, "hclk_rom", "hclk_bus_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(15), 2, GFLAGS),
+ GATE(HCLK_I2S0_8CH, "hclk_i2s0_8ch", "hclk_bus_pre", 0, RK3328_CLKGATE_CON(15), 3, GFLAGS),
+ GATE(HCLK_I2S1_8CH, "hclk_i2s1_8ch", "hclk_bus_pre", 0, RK3328_CLKGATE_CON(15), 4, GFLAGS),
+ GATE(HCLK_I2S2_2CH, "hclk_i2s2_2ch", "hclk_bus_pre", 0, RK3328_CLKGATE_CON(15), 5, GFLAGS),
+ GATE(HCLK_SPDIF_8CH, "hclk_spdif_8ch", "hclk_bus_pre", 0, RK3328_CLKGATE_CON(15), 6, GFLAGS),
+ GATE(HCLK_TSP, "hclk_tsp", "hclk_bus_pre", 0, RK3328_CLKGATE_CON(17), 11, GFLAGS),
+ GATE(HCLK_CRYPTO_MST, "hclk_crypto_mst", "hclk_bus_pre", 0, RK3328_CLKGATE_CON(15), 7, GFLAGS),
+ GATE(HCLK_CRYPTO_SLV, "hclk_crypto_slv", "hclk_bus_pre", 0, RK3328_CLKGATE_CON(15), 8, GFLAGS),
+ GATE(0, "hclk_bus_niu", "hclk_bus_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(15), 13, GFLAGS),
+ GATE(HCLK_PDM, "hclk_pdm", "hclk_bus_pre", 0, RK3328_CLKGATE_CON(28), 0, GFLAGS),
+
+ GATE(0, "pclk_bus_niu", "pclk_bus", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(15), 14, GFLAGS),
+ GATE(0, "pclk_efuse", "pclk_bus", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(15), 9, GFLAGS),
+ GATE(0, "pclk_otp", "pclk_bus", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(28), 4, GFLAGS),
+ GATE(PCLK_I2C0, "pclk_i2c0", "pclk_bus", 0, RK3328_CLKGATE_CON(15), 10, GFLAGS),
+ GATE(PCLK_I2C1, "pclk_i2c1", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 0, GFLAGS),
+ GATE(PCLK_I2C2, "pclk_i2c2", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 1, GFLAGS),
+ GATE(PCLK_I2C3, "pclk_i2c3", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 2, GFLAGS),
+ GATE(PCLK_TIMER, "pclk_timer0", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 3, GFLAGS),
+ GATE(0, "pclk_stimer", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 4, GFLAGS),
+ GATE(PCLK_SPI, "pclk_spi", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 5, GFLAGS),
+ GATE(PCLK_PWM, "pclk_rk_pwm", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 6, GFLAGS),
+ GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 7, GFLAGS),
+ GATE(PCLK_GPIO1, "pclk_gpio1", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 8, GFLAGS),
+ GATE(PCLK_GPIO2, "pclk_gpio2", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 9, GFLAGS),
+ GATE(PCLK_GPIO3, "pclk_gpio3", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 10, GFLAGS),
+ GATE(PCLK_UART0, "pclk_uart0", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 11, GFLAGS),
+ GATE(PCLK_UART1, "pclk_uart1", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 12, GFLAGS),
+ GATE(PCLK_UART2, "pclk_uart2", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 13, GFLAGS),
+ GATE(PCLK_TSADC, "pclk_tsadc", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 14, GFLAGS),
+ GATE(PCLK_DCF, "pclk_dcf", "pclk_bus", 0, RK3328_CLKGATE_CON(16), 15, GFLAGS),
+ GATE(PCLK_GRF, "pclk_grf", "pclk_bus", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(17), 0, GFLAGS),
+ GATE(0, "pclk_cru", "pclk_bus", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(17), 4, GFLAGS),
+ GATE(0, "pclk_sgrf", "pclk_bus", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(17), 6, GFLAGS),
+ GATE(0, "pclk_sim", "pclk_bus", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(17), 10, GFLAGS),
+ GATE(PCLK_SARADC, "pclk_saradc", "pclk_bus", 0, RK3328_CLKGATE_CON(17), 15, GFLAGS),
+ GATE(0, "pclk_pmu", "pclk_bus", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(28), 3, GFLAGS),
+
+ GATE(PCLK_USB3PHY_OTG, "pclk_usb3phy_otg", "pclk_phy_pre", 0, RK3328_CLKGATE_CON(28), 1, GFLAGS),
+ GATE(PCLK_USB3PHY_PIPE, "pclk_usb3phy_pipe", "pclk_phy_pre", 0, RK3328_CLKGATE_CON(28), 2, GFLAGS),
+ GATE(PCLK_USB3_GRF, "pclk_usb3_grf", "pclk_phy_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(17), 2, GFLAGS),
+ GATE(PCLK_USB2_GRF, "pclk_usb2_grf", "pclk_phy_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(17), 14, GFLAGS),
+ GATE(0, "pclk_ddrphy", "pclk_phy_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(17), 13, GFLAGS),
+ GATE(0, "pclk_acodecphy", "pclk_phy_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(17), 5, GFLAGS),
+ GATE(PCLK_HDMIPHY, "pclk_hdmiphy", "pclk_phy_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(17), 7, GFLAGS),
+ GATE(0, "pclk_vdacphy", "pclk_phy_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(17), 8, GFLAGS),
+ GATE(0, "pclk_phy_niu", "pclk_phy_pre", CLK_IGNORE_UNUSED, RK3328_CLKGATE_CON(15), 15, GFLAGS),
+
+ /* PD_MMC */
+ MMC(SCLK_SDMMC_DRV, "sdmmc_drv", "sclk_sdmmc",
+ RK3328_SDMMC_CON0, 1),
+ MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "sclk_sdmmc",
+ RK3328_SDMMC_CON1, 1),
+
+ MMC(SCLK_SDIO_DRV, "sdio_drv", "sclk_sdio",
+ RK3328_SDIO_CON0, 1),
+ MMC(SCLK_SDIO_SAMPLE, "sdio_sample", "sclk_sdio",
+ RK3328_SDIO_CON1, 1),
+
+ MMC(SCLK_EMMC_DRV, "emmc_drv", "sclk_emmc",
+ RK3328_EMMC_CON0, 1),
+ MMC(SCLK_EMMC_SAMPLE, "emmc_sample", "sclk_emmc",
+ RK3328_EMMC_CON1, 1),
+
+ MMC(SCLK_SDMMC_EXT_DRV, "sdmmc_ext_drv", "sclk_sdmmc_ext",
+ RK3328_SDMMC_EXT_CON0, 1),
+ MMC(SCLK_SDMMC_EXT_SAMPLE, "sdmmc_ext_sample", "sclk_sdmmc_ext",
+ RK3328_SDMMC_EXT_CON1, 1),
+};
+
+static const char *const rk3328_critical_clocks[] __initconst = {
+ "aclk_bus",
+ "pclk_bus",
+ "hclk_bus",
+ "aclk_peri",
+ "hclk_peri",
+ "pclk_peri",
+ "pclk_dbg",
+ "aclk_core_niu",
+ "aclk_gic400",
+ "aclk_intmem",
+ "hclk_rom",
+ "pclk_grf",
+ "pclk_cru",
+ "pclk_sgrf",
+ "pclk_timer0",
+ "clk_timer0",
+ "pclk_ddr_msch",
+ "pclk_ddr_mon",
+ "pclk_ddr_grf",
+ "clk_ddrupctl",
+ "clk_ddrmsch",
+ "hclk_ahb1tom",
+ "clk_jtag",
+ "pclk_ddrphy",
+ "pclk_pmu",
+ "hclk_otg_pmu",
+ "aclk_rga_niu",
+ "pclk_vio_h2p",
+ "hclk_vio_h2p",
+};
+
+static void __init rk3328_clk_init(struct device_node *np)
+{
+ struct rockchip_clk_provider *ctx;
+ void __iomem *reg_base;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base) {
+ pr_err("%s: could not map cru region\n", __func__);
+ return;
+ }
+
+ ctx = rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
+ if (IS_ERR(ctx)) {
+ pr_err("%s: rockchip clk init failed\n", __func__);
+ iounmap(reg_base);
+ return;
+ }
+
+ rockchip_clk_register_plls(ctx, rk3328_pll_clks,
+ ARRAY_SIZE(rk3328_pll_clks),
+ RK3328_GRF_SOC_STATUS0);
+ rockchip_clk_register_branches(ctx, rk3328_clk_branches,
+ ARRAY_SIZE(rk3328_clk_branches));
+ rockchip_clk_protect_critical(rk3328_critical_clocks,
+ ARRAY_SIZE(rk3328_critical_clocks));
+
+ rockchip_clk_register_armclk(ctx, ARMCLK, "armclk",
+ mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
+ &rk3328_cpuclk_data, rk3328_cpuclk_rates,
+ ARRAY_SIZE(rk3328_cpuclk_rates));
+
+ rockchip_register_softrst(np, 11, reg_base + RK3328_SOFTRST_CON(0),
+ ROCKCHIP_SOFTRST_HIWORD_MASK);
+
+ rockchip_register_restart_notifier(ctx, RK3328_GLB_SRST_FST, NULL);
+
+ rockchip_clk_of_add_provider(np, ctx);
+}
+
+CLK_OF_DECLARE(rk3328_cru, "rockchip,rk3328-cru", rk3328_clk_init);
diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
index 06acb7e0911f..1132c54871f0 100644
--- a/drivers/clk/rockchip/clk.h
+++ b/drivers/clk/rockchip/clk.h
@@ -91,6 +91,24 @@
#define RK3288_EMMC_CON0 0x218
#define RK3288_EMMC_CON1 0x21c
+#define RK3328_PLL_CON(x) RK2928_PLL_CON(x)
+#define RK3328_CLKSEL_CON(x) ((x) * 0x4 + 0x100)
+#define RK3328_CLKGATE_CON(x) ((x) * 0x4 + 0x200)
+#define RK3328_GRFCLKSEL_CON(x) ((x) * 0x4 + 0x100)
+#define RK3328_GLB_SRST_FST 0x9c
+#define RK3328_GLB_SRST_SND 0x98
+#define RK3328_SOFTRST_CON(x) ((x) * 0x4 + 0x300)
+#define RK3328_MODE_CON 0x80
+#define RK3328_MISC_CON 0x84
+#define RK3328_SDMMC_CON0 0x380
+#define RK3328_SDMMC_CON1 0x384
+#define RK3328_SDIO_CON0 0x388
+#define RK3328_SDIO_CON1 0x38c
+#define RK3328_EMMC_CON0 0x390
+#define RK3328_EMMC_CON1 0x394
+#define RK3328_SDMMC_EXT_CON0 0x398
+#define RK3328_SDMMC_EXT_CON1 0x39C
+
#define RK3368_PLL_CON(x) RK2928_PLL_CON(x)
#define RK3368_CLKSEL_CON(x) ((x) * 0x4 + 0x100)
#define RK3368_CLKGATE_CON(x) ((x) * 0x4 + 0x200)
--
1.9.1
^ permalink raw reply related
* [PATCH] Revert "mmc: dw_mmc-rockchip: add runtime PM support"
From: Jaehoon Chung @ 2016-12-29 3:02 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1482939288-14950-1-git-send-email-ayaka@soulik.info>
Hi Randy,
On 12/29/2016 12:34 AM, Randy Li wrote:
> This reverts commit f90142683f04bcb0729bf0df67a5e29562b725b9.
> It is reported that making RK3288 can't boot from eMMC/MMC.
Could you explain in more detail?
As you mentioned, this patch is making that RK3288 can't boot..then why?
Good way should be that finds the main reason and fixes it.
Not just revert.
Best Regards,
Jaehoon Chung
>
> Signed-off-by: Randy Li <ayaka@soulik.info>
> ---
> drivers/mmc/host/dw_mmc-rockchip.c | 41 +++-----------------------------------
> 1 file changed, 3 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
> index 9a46e46..3189234 100644
> --- a/drivers/mmc/host/dw_mmc-rockchip.c
> +++ b/drivers/mmc/host/dw_mmc-rockchip.c
> @@ -14,7 +14,6 @@
> #include <linux/mmc/dw_mmc.h>
> #include <linux/of_address.h>
> #include <linux/mmc/slot-gpio.h>
> -#include <linux/pm_runtime.h>
> #include <linux/slab.h>
>
> #include "dw_mmc.h"
> @@ -327,7 +326,6 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
> {
> const struct dw_mci_drv_data *drv_data;
> const struct of_device_id *match;
> - int ret;
>
> if (!pdev->dev.of_node)
> return -ENODEV;
> @@ -335,49 +333,16 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
> match = of_match_node(dw_mci_rockchip_match, pdev->dev.of_node);
> drv_data = match->data;
>
> - pm_runtime_get_noresume(&pdev->dev);
> - pm_runtime_set_active(&pdev->dev);
> - pm_runtime_enable(&pdev->dev);
> - pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
> - pm_runtime_use_autosuspend(&pdev->dev);
> -
> - ret = dw_mci_pltfm_register(pdev, drv_data);
> - if (ret) {
> - pm_runtime_disable(&pdev->dev);
> - pm_runtime_set_suspended(&pdev->dev);
> - pm_runtime_put_noidle(&pdev->dev);
> - return ret;
> - }
> -
> - pm_runtime_put_autosuspend(&pdev->dev);
> -
> - return 0;
> + return dw_mci_pltfm_register(pdev, drv_data);
> }
>
> -static int dw_mci_rockchip_remove(struct platform_device *pdev)
> -{
> - pm_runtime_get_sync(&pdev->dev);
> - pm_runtime_disable(&pdev->dev);
> - pm_runtime_put_noidle(&pdev->dev);
> -
> - return dw_mci_pltfm_remove(pdev);
> -}
> -
> -static const struct dev_pm_ops dw_mci_rockchip_dev_pm_ops = {
> - SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> - pm_runtime_force_resume)
> - SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend,
> - dw_mci_runtime_resume,
> - NULL)
> -};
> -
> static struct platform_driver dw_mci_rockchip_pltfm_driver = {
> .probe = dw_mci_rockchip_probe,
> - .remove = dw_mci_rockchip_remove,
> + .remove = dw_mci_pltfm_remove,
> .driver = {
> .name = "dwmmc_rockchip",
> .of_match_table = dw_mci_rockchip_match,
> - .pm = &dw_mci_rockchip_dev_pm_ops,
> + .pm = &dw_mci_pltfm_pmops,
> },
> };
>
>
^ permalink raw reply
* [1/5] ARM: dts: qcom: apq8064: Add missing scm clock
From: Andy Gross @ 2016-12-29 3:14 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161221114939.19973-1-bjorn.andersson@linaro.org>
On Wed, Dec 21, 2016 at 03:49:35AM -0800, Bjorn Andersson wrote:
> As per the device tree binding the apq8064 scm node requires the core
> clock to be specified, so add this.
>
> Cc: John Stultz <john.stultz@linaro.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> arch/arm/boot/dts/qcom-apq8064.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index 268bd470c865..78bf155a52f3 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -303,6 +303,9 @@
> firmware {
> scm {
> compatible = "qcom,scm-apq8064";
> +
> + clocks = <&gcc CE3_CORE_CLK>;
> + clock-names = "core";
Isn't this supposed to be the DFAB clk? The RPM one? I think that's why we let
the clock just fall through optionally before the recent changes that broke
this.
Regards,
Andy
^ permalink raw reply
* [PATCH] Revert "mmc: dw_mmc-rockchip: add runtime PM support"
From: Jaehoon Chung @ 2016-12-29 7:13 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <e0cc8029-0155-4879-a643-ddc4239a55ab@samsung.com>
On 12/29/2016 12:02 PM, Jaehoon Chung wrote:
> Hi Randy,
>
> On 12/29/2016 12:34 AM, Randy Li wrote:
>> This reverts commit f90142683f04bcb0729bf0df67a5e29562b725b9.
>> It is reported that making RK3288 can't boot from eMMC/MMC.
>
> Could you explain in more detail?
> As you mentioned, this patch is making that RK3288 can't boot..then why?
> Good way should be that finds the main reason and fixes it.
> Not just revert.
To Shawn,
Could you check this? If you have rk3288..
If it's not working fine, it needs to revert this patch until finding the problem.
Best Regards,
Jaehoon Chung
>
> Best Regards,
> Jaehoon Chung
>
>>
>> Signed-off-by: Randy Li <ayaka@soulik.info>
>> ---
>> drivers/mmc/host/dw_mmc-rockchip.c | 41 +++-----------------------------------
>> 1 file changed, 3 insertions(+), 38 deletions(-)
>>
>> diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
>> index 9a46e46..3189234 100644
>> --- a/drivers/mmc/host/dw_mmc-rockchip.c
>> +++ b/drivers/mmc/host/dw_mmc-rockchip.c
>> @@ -14,7 +14,6 @@
>> #include <linux/mmc/dw_mmc.h>
>> #include <linux/of_address.h>
>> #include <linux/mmc/slot-gpio.h>
>> -#include <linux/pm_runtime.h>
>> #include <linux/slab.h>
>>
>> #include "dw_mmc.h"
>> @@ -327,7 +326,6 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
>> {
>> const struct dw_mci_drv_data *drv_data;
>> const struct of_device_id *match;
>> - int ret;
>>
>> if (!pdev->dev.of_node)
>> return -ENODEV;
>> @@ -335,49 +333,16 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
>> match = of_match_node(dw_mci_rockchip_match, pdev->dev.of_node);
>> drv_data = match->data;
>>
>> - pm_runtime_get_noresume(&pdev->dev);
>> - pm_runtime_set_active(&pdev->dev);
>> - pm_runtime_enable(&pdev->dev);
>> - pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
>> - pm_runtime_use_autosuspend(&pdev->dev);
>> -
>> - ret = dw_mci_pltfm_register(pdev, drv_data);
>> - if (ret) {
>> - pm_runtime_disable(&pdev->dev);
>> - pm_runtime_set_suspended(&pdev->dev);
>> - pm_runtime_put_noidle(&pdev->dev);
>> - return ret;
>> - }
>> -
>> - pm_runtime_put_autosuspend(&pdev->dev);
>> -
>> - return 0;
>> + return dw_mci_pltfm_register(pdev, drv_data);
>> }
>>
>> -static int dw_mci_rockchip_remove(struct platform_device *pdev)
>> -{
>> - pm_runtime_get_sync(&pdev->dev);
>> - pm_runtime_disable(&pdev->dev);
>> - pm_runtime_put_noidle(&pdev->dev);
>> -
>> - return dw_mci_pltfm_remove(pdev);
>> -}
>> -
>> -static const struct dev_pm_ops dw_mci_rockchip_dev_pm_ops = {
>> - SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
>> - pm_runtime_force_resume)
>> - SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend,
>> - dw_mci_runtime_resume,
>> - NULL)
>> -};
>> -
>> static struct platform_driver dw_mci_rockchip_pltfm_driver = {
>> .probe = dw_mci_rockchip_probe,
>> - .remove = dw_mci_rockchip_remove,
>> + .remove = dw_mci_pltfm_remove,
>> .driver = {
>> .name = "dwmmc_rockchip",
>> .of_match_table = dw_mci_rockchip_match,
>> - .pm = &dw_mci_rockchip_dev_pm_ops,
>> + .pm = &dw_mci_pltfm_pmops,
>> },
>> };
>>
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> .
>
^ permalink raw reply
* [PATCH V1] pinctrl:pxa:pinctrl-pxa2xx:- No need of devm functions
From: Robert Jarzmik @ 2016-12-29 7:20 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CACRpkdY8mwHD1yyHZSHsDsJNPjrgLTfEok38FNons6oabn5ZPw@mail.gmail.com>
Linus Walleij <linus.walleij@linaro.org> writes:
> On Thu, Dec 8, 2016 at 3:35 PM, Arvind Yadav <arvind.yadav.cs@gmail.com> wrote:
>
>> In functions pxa2xx_build_functions, the memory allocated for
>> 'functions' is live within the function only. After the
>> allocation it is immediately freed with devm_kfree. There is
>> no need to allocate memory for 'functions' with devm function
>> so replace devm_kcalloc with kcalloc and devm_kfree with kfree.
>>
>> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
>
> I want the maintainer Robert Jarzmik to review this before I do anything
Hi Linus,
I did review, on December the 10th. I wasn't very enthusiastic about the patch,
if you check back my reply.
Cheers.
--
Robert
^ permalink raw reply
* [PATCH] Revert "mmc: dw_mmc-rockchip: add runtime PM support"
From: Shawn Lin @ 2016-12-29 7:25 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <7e37b8ad-39d0-3a94-f75a-2166ae2caf10@samsung.com>
On 2016/12/29 15:13, Jaehoon Chung wrote:
> On 12/29/2016 12:02 PM, Jaehoon Chung wrote:
>> Hi Randy,
>>
>> On 12/29/2016 12:34 AM, Randy Li wrote:
>>> This reverts commit f90142683f04bcb0729bf0df67a5e29562b725b9.
>>> It is reported that making RK3288 can't boot from eMMC/MMC.
>>
>> Could you explain in more detail?
>> As you mentioned, this patch is making that RK3288 can't boot..then why?
>> Good way should be that finds the main reason and fixes it.
>> Not just revert.
>
> To Shawn,
>
> Could you check this? If you have rk3288..
> If it's not working fine, it needs to revert this patch until finding the problem.
>
Hrmm.....as that patchset was tested based on rk3288 and rk3368, so I
need to know which board Randy are using now and could you share some
log?
I will have a look at it.
> Best Regards,
> Jaehoon Chung
>
>>
>> Best Regards,
>> Jaehoon Chung
>>
>>>
>>> Signed-off-by: Randy Li <ayaka@soulik.info>
>>> ---
>>> drivers/mmc/host/dw_mmc-rockchip.c | 41 +++-----------------------------------
>>> 1 file changed, 3 insertions(+), 38 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
>>> index 9a46e46..3189234 100644
>>> --- a/drivers/mmc/host/dw_mmc-rockchip.c
>>> +++ b/drivers/mmc/host/dw_mmc-rockchip.c
>>> @@ -14,7 +14,6 @@
>>> #include <linux/mmc/dw_mmc.h>
>>> #include <linux/of_address.h>
>>> #include <linux/mmc/slot-gpio.h>
>>> -#include <linux/pm_runtime.h>
>>> #include <linux/slab.h>
>>>
>>> #include "dw_mmc.h"
>>> @@ -327,7 +326,6 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
>>> {
>>> const struct dw_mci_drv_data *drv_data;
>>> const struct of_device_id *match;
>>> - int ret;
>>>
>>> if (!pdev->dev.of_node)
>>> return -ENODEV;
>>> @@ -335,49 +333,16 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
>>> match = of_match_node(dw_mci_rockchip_match, pdev->dev.of_node);
>>> drv_data = match->data;
>>>
>>> - pm_runtime_get_noresume(&pdev->dev);
>>> - pm_runtime_set_active(&pdev->dev);
>>> - pm_runtime_enable(&pdev->dev);
>>> - pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
>>> - pm_runtime_use_autosuspend(&pdev->dev);
>>> -
>>> - ret = dw_mci_pltfm_register(pdev, drv_data);
>>> - if (ret) {
>>> - pm_runtime_disable(&pdev->dev);
>>> - pm_runtime_set_suspended(&pdev->dev);
>>> - pm_runtime_put_noidle(&pdev->dev);
>>> - return ret;
>>> - }
>>> -
>>> - pm_runtime_put_autosuspend(&pdev->dev);
>>> -
>>> - return 0;
>>> + return dw_mci_pltfm_register(pdev, drv_data);
>>> }
>>>
>>> -static int dw_mci_rockchip_remove(struct platform_device *pdev)
>>> -{
>>> - pm_runtime_get_sync(&pdev->dev);
>>> - pm_runtime_disable(&pdev->dev);
>>> - pm_runtime_put_noidle(&pdev->dev);
>>> -
>>> - return dw_mci_pltfm_remove(pdev);
>>> -}
>>> -
>>> -static const struct dev_pm_ops dw_mci_rockchip_dev_pm_ops = {
>>> - SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
>>> - pm_runtime_force_resume)
>>> - SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend,
>>> - dw_mci_runtime_resume,
>>> - NULL)
>>> -};
>>> -
>>> static struct platform_driver dw_mci_rockchip_pltfm_driver = {
>>> .probe = dw_mci_rockchip_probe,
>>> - .remove = dw_mci_rockchip_remove,
>>> + .remove = dw_mci_pltfm_remove,
>>> .driver = {
>>> .name = "dwmmc_rockchip",
>>> .of_match_table = dw_mci_rockchip_match,
>>> - .pm = &dw_mci_rockchip_dev_pm_ops,
>>> + .pm = &dw_mci_pltfm_pmops,
>>> },
>>> };
>>>
>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>> .
>>
>
>
>
>
--
Best Regards
Shawn Lin
^ permalink raw reply
* [PATCH 0/4] Use Exynos macros for pinctrl settings
From: Andi Shyti @ 2016-12-29 8:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CGME20161229084221epcas1p4d76b4b30f59734f7eee29aec53b54af3@epcas1p4.samsung.com>
Hi,
This patchset is just a refactoring of the exynos5433 and TM2
pinctrl definitions. Standing to the samsung-pinctrl.txt binding
the Exynos related DTS should use the macros introduced by
commit:
5db7e3bb87df ("pinctrl: dt-bindings: samsung: Add header with
values used for configuration")
Would be nice to see in the future all the PIN related macros in
the same file, as they more or less do the same thing.
Thanks,
Andi
Andi Shyti (4):
pinctrl: dt-bindings: samsung: add drive strength macros for
Exynos5433
ARM64: dts: exynos5433: use macros for pinctrl configuration on
Exynos5433
ARM64: dts: TM2: comply to the samsung pinctrl naming convention
ARM64: dts: exynos5433: remove unused code
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 373 ++++++++++-----------
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 254 +++++++-------
include/dt-bindings/pinctrl/samsung.h | 6 +
3 files changed, 314 insertions(+), 319 deletions(-)
--
2.11.0
^ permalink raw reply
* [PATCH 1/4] pinctrl: dt-bindings: samsung: add drive strength macros for Exynos5433
From: Andi Shyti @ 2016-12-29 8:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161229084211.20442-1-andi.shyti@samsung.com>
Commit 5db7e3bb87df ("pinctrl: dt-bindings: samsung: Add header with
values used for configuration") has added a header file for defining the
pinctrl values in order to avoid hardcoded settings in the Exynos
DTS related files.
Extend samsung.h to the Exynos5433 for drive strength values
which are strictly related to the particular SoC and may defer
from others.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
---
include/dt-bindings/pinctrl/samsung.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/include/dt-bindings/pinctrl/samsung.h b/include/dt-bindings/pinctrl/samsung.h
index 6276eb785e2b..58868313d64b 100644
--- a/include/dt-bindings/pinctrl/samsung.h
+++ b/include/dt-bindings/pinctrl/samsung.h
@@ -45,6 +45,12 @@
#define EXYNOS5420_PIN_DRV_LV3 2
#define EXYNOS5420_PIN_DRV_LV4 3
+/* Drive strengths for Exynos5433 */
+#define EXYNOS5433_PIN_DRV_LV1 0
+#define EXYNOS5433_PIN_DRV_LV2 1
+#define EXYNOS5433_PIN_DRV_LV3 2
+#define EXYNOS5433_PIN_DRV_LV4 3
+
#define EXYNOS_PIN_FUNC_INPUT 0
#define EXYNOS_PIN_FUNC_OUTPUT 1
#define EXYNOS_PIN_FUNC_2 2
--
2.11.0
^ permalink raw reply related
* [PATCH 2/4] ARM64: dts: exynos5433: use macros for pinctrl configuration on Exynos5433
From: Andi Shyti @ 2016-12-29 8:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161229084211.20442-1-andi.shyti@samsung.com>
Use the macros defined in include/dt-bindings/pinctrl/samsung.h
instead of hardcoded values.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
---
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 348 +++++++++++----------
1 file changed, 175 insertions(+), 173 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
index ad71247b074f..36da7dce409a 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -12,6 +12,8 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/pinctrl/samsung.h>
+
#define PIN_PULL_NONE 0
#define PIN_PULL_DOWN 1
#define PIN_PULL_UP 3
@@ -145,23 +147,23 @@
i2s0_bus: i2s0-bus {
samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
"gpz0-4", "gpz0-5", "gpz0-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
pcm0_bus: pcm0-bus {
samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
uart_aud_bus: uart-aud-bus {
samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
};
@@ -196,16 +198,16 @@
spi2_bus: spi2-bus {
samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
hs_i2c6_bus: hs-i2c6-bus {
samsung,pins = "gpd5-3", "gpd5-2";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
};
@@ -260,141 +262,141 @@
sd0_clk: sd0-clk {
samsung,pins = "gpr0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpr0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd0_rdqs: sd0-rdqs {
samsung,pins = "gpr0-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd0_qrdy: sd0-qrdy {
samsung,pins = "gpr0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpr1-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpr2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpr2-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpr3-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd1_bus8: sd1-bus-width8 {
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
pcie_bus: pcie_bus {
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpr4-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpr4-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpr4-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpr4-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV4>;
};
sd2_clk_output: sd2-clk-output {
samsung,pins = "gpr4-0";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV3>;
};
sd2_cmd_output: sd2-cmd-output {
samsung,pins = "gpr4-1";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV3>;
};
};
@@ -419,9 +421,9 @@
hs_i2c4_bus: hs-i2c4-bus {
samsung,pins = "gpj0-1", "gpj0-0";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
};
@@ -564,225 +566,225 @@
hs_i2c8_bus: hs-i2c8-bus {
samsung,pins = "gpb0-1", "gpb0-0";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
hs_i2c9_bus: hs-i2c9-bus {
samsung,pins = "gpb0-3", "gpb0-2";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
i2s1_bus: i2s1-bus {
samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
"gpd4-3", "gpd4-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
pcm1_bus: pcm1-bus {
samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
"gpd4-3", "gpd4-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
spdif_bus: spdif-bus {
samsung,pins = "gpd4-3", "gpd4-4";
- samsung,pin-function = <4>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
fimc_is_spi_pin0: fimc-is-spi-pin0 {
samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
fimc_is_spi_pin1: fimc-is-spi-pin1 {
samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
uart0_bus: uart0-bus {
samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
hs_i2c2_bus: hs-i2c2-bus {
samsung,pins = "gpd0-3", "gpd0-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
uart2_bus: uart2-bus {
samsung,pins = "gpd1-5", "gpd1-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
uart1_bus: uart1-bus {
samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
hs_i2c3_bus: hs-i2c3-bus {
samsung,pins = "gpd1-3", "gpd1-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
hs_i2c0_bus: hs-i2c0-bus {
samsung,pins = "gpd2-1", "gpd2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
hs_i2c1_bus: hs-i2c1-bus {
samsung,pins = "gpd2-3", "gpd2-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
pwm0_out: pwm0-out {
samsung,pins = "gpd2-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
pwm1_out: pwm1-out {
samsung,pins = "gpd2-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
pwm2_out: pwm2-out {
samsung,pins = "gpd2-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
pwm3_out: pwm3-out {
samsung,pins = "gpd2-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
hs_i2c7_bus: hs-i2c7-bus {
samsung,pins = "gpd2-7", "gpd2-6";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
hs_i2c10_bus: hs-i2c10-bus {
samsung,pins = "gpg3-1", "gpg3-0";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
hs_i2c11_bus: hs-i2c11-bus {
samsung,pins = "gpg3-3", "gpg3-2";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
spi3_bus: spi3-bus {
samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
spi4_bus: spi4-bus {
samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
fimc_is_uart: fimc-is-uart {
samsung,pins = "gpc1-1", "gpc0-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
fimc_is_ch0_i2c: fimc-is-ch0_i2c {
samsung,pins = "gpc2-1", "gpc2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
fimc_is_ch0_mclk: fimc-is-ch0_mclk {
samsung,pins = "gpd7-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
fimc_is_ch1_i2c: fimc-is-ch1-i2c {
samsung,pins = "gpc2-3", "gpc2-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
fimc_is_ch1_mclk: fimc-is-ch1-mclk {
samsung,pins = "gpd7-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
fimc_is_ch2_i2c: fimc-is-ch2-i2c {
samsung,pins = "gpc2-5", "gpc2-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
fimc_is_ch2_mclk: fimc-is-ch2-mclk {
samsung,pins = "gpd7-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
};
@@ -797,8 +799,8 @@
hs_i2c5_bus: hs-i2c5-bus {
samsung,pins = "gpj1-1", "gpj1-0";
- samsung,pin-function = <4>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_LV1>;
};
};
--
2.11.0
^ permalink raw reply related
* [PATCH 3/4] ARM64: dts: TM2: comply to the samsung pinctrl naming convention
From: Andi Shyti @ 2016-12-29 8:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161229084211.20442-1-andi.shyti@samsung.com>
Change the PIN() macro definition so that it can use the macros
from pinctrl/samsung.h header file.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
---
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 12 +-
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 254 ++++++++++-----------
2 files changed, 133 insertions(+), 133 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
index 36da7dce409a..9afed9fcf7e1 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -27,12 +27,12 @@
#define PIN_OUT 1
#define PIN_FUNC1 2
-#define PIN(_func, _pin, _pull, _drv) \
- _pin { \
- samsung,pins = #_pin; \
- samsung,pin-function = <PIN_ ##_func>; \
- samsung,pin-pud = <PIN_PULL_ ##_pull>; \
- samsung,pin-drv = <PIN_DRV_ ##_drv>; \
+#define PIN(_func, _pin, _pull, _drv) \
+ _pin { \
+ samsung,pins = #_pin; \
+ samsung,pin-function = <EXYNOS_PIN_FUNC_ ##_func>; \
+ samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_ ##_drv>; \
}
&pinctrl_alive {
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index f21bdc2ff834..a2bc8e48eca4 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -742,77 +742,77 @@
pinctrl-0 = <&initial_alive>;
initial_alive: initial-state {
- PIN(IN, gpa0-0, DOWN, LV1);
- PIN(IN, gpa0-1, NONE, LV1);
- PIN(IN, gpa0-2, DOWN, LV1);
- PIN(IN, gpa0-3, NONE, LV1);
- PIN(IN, gpa0-4, NONE, LV1);
- PIN(IN, gpa0-5, DOWN, LV1);
- PIN(IN, gpa0-6, NONE, LV1);
- PIN(IN, gpa0-7, NONE, LV1);
-
- PIN(IN, gpa1-0, UP, LV1);
- PIN(IN, gpa1-1, NONE, LV1);
- PIN(IN, gpa1-2, NONE, LV1);
- PIN(IN, gpa1-3, DOWN, LV1);
- PIN(IN, gpa1-4, DOWN, LV1);
- PIN(IN, gpa1-5, NONE, LV1);
- PIN(IN, gpa1-6, NONE, LV1);
- PIN(IN, gpa1-7, NONE, LV1);
-
- PIN(IN, gpa2-0, NONE, LV1);
- PIN(IN, gpa2-1, NONE, LV1);
- PIN(IN, gpa2-2, NONE, LV1);
- PIN(IN, gpa2-3, DOWN, LV1);
- PIN(IN, gpa2-4, NONE, LV1);
- PIN(IN, gpa2-5, DOWN, LV1);
- PIN(IN, gpa2-6, DOWN, LV1);
- PIN(IN, gpa2-7, NONE, LV1);
-
- PIN(IN, gpa3-0, DOWN, LV1);
- PIN(IN, gpa3-1, DOWN, LV1);
- PIN(IN, gpa3-2, NONE, LV1);
- PIN(IN, gpa3-3, DOWN, LV1);
- PIN(IN, gpa3-4, NONE, LV1);
- PIN(IN, gpa3-5, DOWN, LV1);
- PIN(IN, gpa3-6, DOWN, LV1);
- PIN(IN, gpa3-7, DOWN, LV1);
-
- PIN(IN, gpf1-0, NONE, LV1);
- PIN(IN, gpf1-1, NONE, LV1);
- PIN(IN, gpf1-2, DOWN, LV1);
- PIN(IN, gpf1-4, UP, LV1);
- PIN(OUT, gpf1-5, NONE, LV1);
- PIN(IN, gpf1-6, DOWN, LV1);
- PIN(IN, gpf1-7, DOWN, LV1);
-
- PIN(IN, gpf2-0, DOWN, LV1);
- PIN(IN, gpf2-1, DOWN, LV1);
- PIN(IN, gpf2-2, DOWN, LV1);
- PIN(IN, gpf2-3, DOWN, LV1);
-
- PIN(IN, gpf3-0, DOWN, LV1);
- PIN(IN, gpf3-1, DOWN, LV1);
- PIN(IN, gpf3-2, NONE, LV1);
- PIN(IN, gpf3-3, DOWN, LV1);
-
- PIN(IN, gpf4-0, DOWN, LV1);
- PIN(IN, gpf4-1, DOWN, LV1);
- PIN(IN, gpf4-2, DOWN, LV1);
- PIN(IN, gpf4-3, DOWN, LV1);
- PIN(IN, gpf4-4, DOWN, LV1);
- PIN(IN, gpf4-5, DOWN, LV1);
- PIN(IN, gpf4-6, DOWN, LV1);
- PIN(IN, gpf4-7, DOWN, LV1);
-
- PIN(IN, gpf5-0, DOWN, LV1);
- PIN(IN, gpf5-1, DOWN, LV1);
- PIN(IN, gpf5-2, DOWN, LV1);
- PIN(IN, gpf5-3, DOWN, LV1);
- PIN(OUT, gpf5-4, NONE, LV1);
- PIN(IN, gpf5-5, DOWN, LV1);
- PIN(IN, gpf5-6, DOWN, LV1);
- PIN(IN, gpf5-7, DOWN, LV1);
+ PIN(INPUT, gpa0-0, DOWN, LV1);
+ PIN(INPUT, gpa0-1, NONE, LV1);
+ PIN(INPUT, gpa0-2, DOWN, LV1);
+ PIN(INPUT, gpa0-3, NONE, LV1);
+ PIN(INPUT, gpa0-4, NONE, LV1);
+ PIN(INPUT, gpa0-5, DOWN, LV1);
+ PIN(INPUT, gpa0-6, NONE, LV1);
+ PIN(INPUT, gpa0-7, NONE, LV1);
+
+ PIN(INPUT, gpa1-0, UP, LV1);
+ PIN(INPUT, gpa1-1, NONE, LV1);
+ PIN(INPUT, gpa1-2, NONE, LV1);
+ PIN(INPUT, gpa1-3, DOWN, LV1);
+ PIN(INPUT, gpa1-4, DOWN, LV1);
+ PIN(INPUT, gpa1-5, NONE, LV1);
+ PIN(INPUT, gpa1-6, NONE, LV1);
+ PIN(INPUT, gpa1-7, NONE, LV1);
+
+ PIN(INPUT, gpa2-0, NONE, LV1);
+ PIN(INPUT, gpa2-1, NONE, LV1);
+ PIN(INPUT, gpa2-2, NONE, LV1);
+ PIN(INPUT, gpa2-3, DOWN, LV1);
+ PIN(INPUT, gpa2-4, NONE, LV1);
+ PIN(INPUT, gpa2-5, DOWN, LV1);
+ PIN(INPUT, gpa2-6, DOWN, LV1);
+ PIN(INPUT, gpa2-7, NONE, LV1);
+
+ PIN(INPUT, gpa3-0, DOWN, LV1);
+ PIN(INPUT, gpa3-1, DOWN, LV1);
+ PIN(INPUT, gpa3-2, NONE, LV1);
+ PIN(INPUT, gpa3-3, DOWN, LV1);
+ PIN(INPUT, gpa3-4, NONE, LV1);
+ PIN(INPUT, gpa3-5, DOWN, LV1);
+ PIN(INPUT, gpa3-6, DOWN, LV1);
+ PIN(INPUT, gpa3-7, DOWN, LV1);
+
+ PIN(INPUT, gpf1-0, NONE, LV1);
+ PIN(INPUT, gpf1-1, NONE, LV1);
+ PIN(INPUT, gpf1-2, DOWN, LV1);
+ PIN(INPUT, gpf1-4, UP, LV1);
+ PIN(OUTPUT, gpf1-5, NONE, LV1);
+ PIN(INPUT, gpf1-6, DOWN, LV1);
+ PIN(INPUT, gpf1-7, DOWN, LV1);
+
+ PIN(INPUT, gpf2-0, DOWN, LV1);
+ PIN(INPUT, gpf2-1, DOWN, LV1);
+ PIN(INPUT, gpf2-2, DOWN, LV1);
+ PIN(INPUT, gpf2-3, DOWN, LV1);
+
+ PIN(INPUT, gpf3-0, DOWN, LV1);
+ PIN(INPUT, gpf3-1, DOWN, LV1);
+ PIN(INPUT, gpf3-2, NONE, LV1);
+ PIN(INPUT, gpf3-3, DOWN, LV1);
+
+ PIN(INPUT, gpf4-0, DOWN, LV1);
+ PIN(INPUT, gpf4-1, DOWN, LV1);
+ PIN(INPUT, gpf4-2, DOWN, LV1);
+ PIN(INPUT, gpf4-3, DOWN, LV1);
+ PIN(INPUT, gpf4-4, DOWN, LV1);
+ PIN(INPUT, gpf4-5, DOWN, LV1);
+ PIN(INPUT, gpf4-6, DOWN, LV1);
+ PIN(INPUT, gpf4-7, DOWN, LV1);
+
+ PIN(INPUT, gpf5-0, DOWN, LV1);
+ PIN(INPUT, gpf5-1, DOWN, LV1);
+ PIN(INPUT, gpf5-2, DOWN, LV1);
+ PIN(INPUT, gpf5-3, DOWN, LV1);
+ PIN(OUTPUT, gpf5-4, NONE, LV1);
+ PIN(INPUT, gpf5-5, DOWN, LV1);
+ PIN(INPUT, gpf5-6, DOWN, LV1);
+ PIN(INPUT, gpf5-7, DOWN, LV1);
};
te_irq: te_irq {
@@ -826,8 +826,8 @@
pinctrl-0 = <&initial_cpif>;
initial_cpif: initial-state {
- PIN(IN, gpv6-0, DOWN, LV1);
- PIN(IN, gpv6-1, DOWN, LV1);
+ PIN(INPUT, gpv6-0, DOWN, LV1);
+ PIN(INPUT, gpv6-1, DOWN, LV1);
};
};
@@ -836,9 +836,9 @@
pinctrl-0 = <&initial_ese>;
initial_ese: initial-state {
- PIN(IN, gpj2-0, DOWN, LV1);
- PIN(IN, gpj2-1, DOWN, LV1);
- PIN(IN, gpj2-2, DOWN, LV1);
+ PIN(INPUT, gpj2-0, DOWN, LV1);
+ PIN(INPUT, gpj2-1, DOWN, LV1);
+ PIN(INPUT, gpj2-2, DOWN, LV1);
};
};
@@ -847,11 +847,11 @@
pinctrl-0 = <&initial_fsys>;
initial_fsys: initial-state {
- PIN(IN, gpr3-0, NONE, LV1);
- PIN(IN, gpr3-1, DOWN, LV1);
- PIN(IN, gpr3-2, DOWN, LV1);
- PIN(IN, gpr3-3, DOWN, LV1);
- PIN(IN, gpr3-7, NONE, LV1);
+ PIN(INPUT, gpr3-0, NONE, LV1);
+ PIN(INPUT, gpr3-1, DOWN, LV1);
+ PIN(INPUT, gpr3-2, DOWN, LV1);
+ PIN(INPUT, gpr3-3, DOWN, LV1);
+ PIN(INPUT, gpr3-7, NONE, LV1);
};
};
@@ -860,14 +860,14 @@
pinctrl-0 = <&initial_imem>;
initial_imem: initial-state {
- PIN(IN, gpf0-0, UP, LV1);
- PIN(IN, gpf0-1, UP, LV1);
- PIN(IN, gpf0-2, DOWN, LV1);
- PIN(IN, gpf0-3, UP, LV1);
- PIN(IN, gpf0-4, DOWN, LV1);
- PIN(IN, gpf0-5, NONE, LV1);
- PIN(IN, gpf0-6, DOWN, LV1);
- PIN(IN, gpf0-7, UP, LV1);
+ PIN(INPUT, gpf0-0, UP, LV1);
+ PIN(INPUT, gpf0-1, UP, LV1);
+ PIN(INPUT, gpf0-2, DOWN, LV1);
+ PIN(INPUT, gpf0-3, UP, LV1);
+ PIN(INPUT, gpf0-4, DOWN, LV1);
+ PIN(INPUT, gpf0-5, NONE, LV1);
+ PIN(INPUT, gpf0-6, DOWN, LV1);
+ PIN(INPUT, gpf0-7, UP, LV1);
};
};
@@ -876,7 +876,7 @@
pinctrl-0 = <&initial_nfc>;
initial_nfc: initial-state {
- PIN(IN, gpj0-2, DOWN, LV1);
+ PIN(INPUT, gpj0-2, DOWN, LV1);
};
};
@@ -885,54 +885,54 @@
pinctrl-0 = <&initial_peric>;
initial_peric: initial-state {
- PIN(IN, gpv7-0, DOWN, LV1);
- PIN(IN, gpv7-1, DOWN, LV1);
- PIN(IN, gpv7-2, NONE, LV1);
- PIN(IN, gpv7-3, DOWN, LV1);
- PIN(IN, gpv7-4, DOWN, LV1);
- PIN(IN, gpv7-5, DOWN, LV1);
+ PIN(INPUT, gpv7-0, DOWN, LV1);
+ PIN(INPUT, gpv7-1, DOWN, LV1);
+ PIN(INPUT, gpv7-2, NONE, LV1);
+ PIN(INPUT, gpv7-3, DOWN, LV1);
+ PIN(INPUT, gpv7-4, DOWN, LV1);
+ PIN(INPUT, gpv7-5, DOWN, LV1);
- PIN(IN, gpb0-4, DOWN, LV1);
+ PIN(INPUT, gpb0-4, DOWN, LV1);
- PIN(IN, gpc0-2, DOWN, LV1);
- PIN(IN, gpc0-5, DOWN, LV1);
- PIN(IN, gpc0-7, DOWN, LV1);
+ PIN(INPUT, gpc0-2, DOWN, LV1);
+ PIN(INPUT, gpc0-5, DOWN, LV1);
+ PIN(INPUT, gpc0-7, DOWN, LV1);
- PIN(IN, gpc1-1, DOWN, LV1);
+ PIN(INPUT, gpc1-1, DOWN, LV1);
- PIN(IN, gpc3-4, NONE, LV1);
- PIN(IN, gpc3-5, NONE, LV1);
- PIN(IN, gpc3-6, NONE, LV1);
- PIN(IN, gpc3-7, NONE, LV1);
+ PIN(INPUT, gpc3-4, NONE, LV1);
+ PIN(INPUT, gpc3-5, NONE, LV1);
+ PIN(INPUT, gpc3-6, NONE, LV1);
+ PIN(INPUT, gpc3-7, NONE, LV1);
- PIN(OUT, gpg0-0, NONE, LV1);
- PIN(FUNC1, gpg0-1, DOWN, LV1);
+ PIN(OUTPUT, gpg0-0, NONE, LV1);
+ PIN(2, gpg0-1, DOWN, LV1);
- PIN(IN, gpd2-5, DOWN, LV1);
+ PIN(INPUT, gpd2-5, DOWN, LV1);
- PIN(IN, gpd4-0, NONE, LV1);
- PIN(IN, gpd4-1, DOWN, LV1);
- PIN(IN, gpd4-2, DOWN, LV1);
- PIN(IN, gpd4-3, DOWN, LV1);
- PIN(IN, gpd4-4, DOWN, LV1);
+ PIN(INPUT, gpd4-0, NONE, LV1);
+ PIN(INPUT, gpd4-1, DOWN, LV1);
+ PIN(INPUT, gpd4-2, DOWN, LV1);
+ PIN(INPUT, gpd4-3, DOWN, LV1);
+ PIN(INPUT, gpd4-4, DOWN, LV1);
- PIN(IN, gpd6-3, DOWN, LV1);
+ PIN(INPUT, gpd6-3, DOWN, LV1);
- PIN(IN, gpd8-1, UP, LV1);
+ PIN(INPUT, gpd8-1, UP, LV1);
- PIN(IN, gpg1-0, DOWN, LV1);
- PIN(IN, gpg1-1, DOWN, LV1);
- PIN(IN, gpg1-2, DOWN, LV1);
- PIN(IN, gpg1-3, DOWN, LV1);
- PIN(IN, gpg1-4, DOWN, LV1);
+ PIN(INPUT, gpg1-0, DOWN, LV1);
+ PIN(INPUT, gpg1-1, DOWN, LV1);
+ PIN(INPUT, gpg1-2, DOWN, LV1);
+ PIN(INPUT, gpg1-3, DOWN, LV1);
+ PIN(INPUT, gpg1-4, DOWN, LV1);
- PIN(IN, gpg2-0, DOWN, LV1);
- PIN(IN, gpg2-1, DOWN, LV1);
+ PIN(INPUT, gpg2-0, DOWN, LV1);
+ PIN(INPUT, gpg2-1, DOWN, LV1);
- PIN(IN, gpg3-0, DOWN, LV1);
- PIN(IN, gpg3-1, DOWN, LV1);
- PIN(IN, gpg3-5, DOWN, LV1);
- PIN(IN, gpg3-7, DOWN, LV1);
+ PIN(INPUT, gpg3-0, DOWN, LV1);
+ PIN(INPUT, gpg3-1, DOWN, LV1);
+ PIN(INPUT, gpg3-5, DOWN, LV1);
+ PIN(INPUT, gpg3-7, DOWN, LV1);
};
};
@@ -941,7 +941,7 @@
pinctrl-0 = <&initial_touch>;
initial_touch: initial-state {
- PIN(IN, gpj1-2, DOWN, LV1);
+ PIN(INPUT, gpj1-2, DOWN, LV1);
};
};
--
2.11.0
^ permalink raw reply related
* [PATCH 4/4] ARM64: dts: exynos5433: remove unused code
From: Andi Shyti @ 2016-12-29 8:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161229084211.20442-1-andi.shyti@samsung.com>
Because the pinctrl DTS is using the samsung.h macros, the
previously pin defines are anused. Remove them.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
---
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 13 -------------
1 file changed, 13 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
index 9afed9fcf7e1..3c821e5c241e 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -14,19 +14,6 @@
#include <dt-bindings/pinctrl/samsung.h>
-#define PIN_PULL_NONE 0
-#define PIN_PULL_DOWN 1
-#define PIN_PULL_UP 3
-
-#define PIN_DRV_LV1 0
-#define PIN_DRV_LV2 2
-#define PIN_DRV_LV3 1
-#define PIN_DRV_LV4 3
-
-#define PIN_IN 0
-#define PIN_OUT 1
-#define PIN_FUNC1 2
-
#define PIN(_func, _pin, _pull, _drv) \
_pin { \
samsung,pins = #_pin; \
--
2.11.0
^ permalink raw reply related
* [BUG] ARM64: amlogic: gxbb: unhandled level 2 translation fault (11)
From: Neil Armstrong @ 2016-12-29 9:07 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161224140028.4205-1-xypron.glpk@gmx.de>
On 12/24/2016 03:00 PM, Heinrich Schuchardt wrote:
> When trying to run sddm on an Hardkernel Odroid C2 I invariably run into the
> translation fault below.
>
> The following mail thread relates this kind of problem to TLB (translation
> lookaside buffer) broadcasting.
>
> https://lkml.org/lkml/2014/4/15/207
>
> [ 3163.014263] sddm[1851]: unhandled level 2 translation fault (11) at 0x00000160, esr 0x82000006
> [ 3163.017287] pgd = ffff80007bf86000
> [ 3163.020589] [00000160] *pgd=000000007a8a3003
> [ 3163.024733] , *pud=000000007be9c003
> [ 3163.028095] , *pmd=0000000000000000
>
>
> [ 3163.033026] CPU: 1 PID: 1851 Comm: sddm Not tainted 4.9.0-next-20161212-r022-arm64 #1
> [ 3163.040831] Hardware name: Hardkernel ODROID-C2 (DT)
> [ 3163.045698] task: ffff80007bc6d780 task.stack: ffff80007c524000
> [ 3163.051563] PC is at 0x160
> [ 3163.054231] LR is at 0xffff9a9fbc98
> [ 3163.057686] pc : [<0000000000000160>] lr : [<0000ffff9a9fbc98>] pstate: 40000000
> [ 3163.065022] sp : 0000ffffd7180130
> [ 3163.068281] x29: 0000ffffd7180130 x28: 0000ffffd7180288
> [ 3163.073538] x27: 0000ffff9aa94000 x26: 0000000000000001
> [ 3163.078798] x25: 0000000000000000 x24: 0000ffffd7180410
> [ 3163.084060] x23: 000000000e0c2190 x22: 000000000e0ca5c0
> [ 3163.089322] x21: 0000ffff9ac35000 x20: 0000000000454fa9
> [ 3163.094583] x19: 0000000000454fa8 x18: 000000000e0b5938
> [ 3163.099843] x17: 0000ffff9a3f2988 x16: 0000ffff9ac36aa0
> [ 3163.105105] x15: 0000000000000000 x14: 0000000000000000
> [ 3163.110367] x13: 6d00640064007300 x12: 0800000005000000
> [ 3163.115627] x11: 0000040000000000 x10: 0000a00000000000
> [ 3163.120889] x9 : 00003fffffffffff x8 : 0000000000000000
> [ 3163.126150] x7 : 000000000e0cb520 x6 : 0000000000454fc0
> [ 3163.131412] x5 : 0000ffffd717ffd8 x4 : 000000000e0cb510
> [ 3163.136680] x3 : 0000000000000004 x2 : f2f9022b551b3900
> [ 3163.141935] x1 : 0000000000000160 x0 : 000000000e0ca5c0
>
> Best regards
>
> Heinrich Schuchardt
Hi Heinrich,
I personally never had this issue even while loading huge applications loke LibreOffice and Gnome environment.
I will have a look and try to reproduce this issue, can you provide us your configuration and user-space complete use case ?
Neil
^ permalink raw reply
* [PATCH 1/4] pinctrl: dt-bindings: samsung: add drive strength macros for Exynos5433
From: Chanwoo Choi @ 2016-12-29 9:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161229084211.20442-2-andi.shyti@samsung.com>
Hi Andi,
On 2016? 12? 29? 17:42, Andi Shyti wrote:
> Commit 5db7e3bb87df ("pinctrl: dt-bindings: samsung: Add header with
> values used for configuration") has added a header file for defining the
> pinctrl values in order to avoid hardcoded settings in the Exynos
> DTS related files.
>
> Extend samsung.h to the Exynos5433 for drive strength values
> which are strictly related to the particular SoC and may defer
> from others.
>
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> ---
> include/dt-bindings/pinctrl/samsung.h | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/include/dt-bindings/pinctrl/samsung.h b/include/dt-bindings/pinctrl/samsung.h
> index 6276eb785e2b..58868313d64b 100644
> --- a/include/dt-bindings/pinctrl/samsung.h
> +++ b/include/dt-bindings/pinctrl/samsung.h
> @@ -45,6 +45,12 @@
> #define EXYNOS5420_PIN_DRV_LV3 2
> #define EXYNOS5420_PIN_DRV_LV4 3
>
> +/* Drive strengths for Exynos5433 */
> +#define EXYNOS5433_PIN_DRV_LV1 0
> +#define EXYNOS5433_PIN_DRV_LV2 1
> +#define EXYNOS5433_PIN_DRV_LV3 2
> +#define EXYNOS5433_PIN_DRV_LV4 3
Exynos5433 has the same value with EXYNOS5420. So, I'd like you to use the EXYNOS5420_PIN_DRV_LVx instead of separate the definitions.
> +
> #define EXYNOS_PIN_FUNC_INPUT 0
> #define EXYNOS_PIN_FUNC_OUTPUT 1
> #define EXYNOS_PIN_FUNC_2 2
>
--
Regards,
Chanwoo Choi
^ permalink raw reply
* [1/4] pinctrl: dt-bindings: samsung: add drive strength macros for Exynos5433
From: Jaehoon Chung @ 2016-12-29 9:39 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161229084211.20442-2-andi.shyti@samsung.com>
On 12/29/2016 05:42 PM, Andi Shyti wrote:
> Commit 5db7e3bb87df ("pinctrl: dt-bindings: samsung: Add header with
> values used for configuration") has added a header file for defining the
> pinctrl values in order to avoid hardcoded settings in the Exynos
> DTS related files.
>
> Extend samsung.h to the Exynos5433 for drive strength values
> which are strictly related to the particular SoC and may defer
> from others.
>
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> ---
> include/dt-bindings/pinctrl/samsung.h | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/include/dt-bindings/pinctrl/samsung.h b/include/dt-bindings/pinctrl/samsung.h
> index 6276eb785e2b..58868313d64b 100644
> --- a/include/dt-bindings/pinctrl/samsung.h
> +++ b/include/dt-bindings/pinctrl/samsung.h
> @@ -45,6 +45,12 @@
> #define EXYNOS5420_PIN_DRV_LV3 2
> #define EXYNOS5420_PIN_DRV_LV4 3
>
> +/* Drive strengths for Exynos5433 */
> +#define EXYNOS5433_PIN_DRV_LV1 0
> +#define EXYNOS5433_PIN_DRV_LV2 1
> +#define EXYNOS5433_PIN_DRV_LV3 2
> +#define EXYNOS5433_PIN_DRV_LV4 3
Well, i'm not sure..but you needs to compare the other Exynos5 series.
it's difference bit Offset. Did you check it?
I didn't check pinctrl file..if it doesn't apply any exynos5433 pinctrl for drv_strength.
it will work wrong..
Best Regards,
Jaehoon Chung
> +
> #define EXYNOS_PIN_FUNC_INPUT 0
> #define EXYNOS_PIN_FUNC_OUTPUT 1
> #define EXYNOS_PIN_FUNC_2 2
>
>
^ permalink raw reply
* [PATCH] mtd: nand: Update dependency of IFC for LS1021A
From: kbuild test robot @ 2016-12-29 9:52 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1482973102-47659-1-git-send-email-b18965@freescale.com>
Hi Alison,
[auto build test WARNING on mtd/master]
[also build test WARNING on v4.10-rc1 next-20161224]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Alison-Wang/mtd-nand-Update-dependency-of-IFC-for-LS1021A/20161229-125233
base: git://git.infradead.org/linux-mtd.git master
config: arm-allmodconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=arm
All warnings (new ones prefixed by >>):
warning: (MTD_NAND_FSL_IFC) selects FSL_IFC which has unmet direct dependencies (MEMORY && (FSL_SOC || ARCH_LAYERSCAPE))
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/gzip
Size: 59438 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161229/8afb2f05/attachment-0001.gz>
^ permalink raw reply
* [PATCH] Revert "mmc: dw_mmc-rockchip: add runtime PM support"
From: Randy Li @ 2016-12-29 10:25 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <7fb90b9e-75c3-0184-4f0a-d4113899b860@rock-chips.com>
On 12/29/2016 03:25 PM, Shawn Lin wrote:
> On 2016/12/29 15:13, Jaehoon Chung wrote:
>> On 12/29/2016 12:02 PM, Jaehoon Chung wrote:
>>> Hi Randy,
>>>
>>> On 12/29/2016 12:34 AM, Randy Li wrote:
>>>> This reverts commit f90142683f04bcb0729bf0df67a5e29562b725b9.
>>>> It is reported that making RK3288 can't boot from eMMC/MMC.
>>>
>>> Could you explain in more detail?
>>> As you mentioned, this patch is making that RK3288 can't boot..then why?
>>> Good way should be that finds the main reason and fixes it.
>>> Not just revert.
>>
>> To Shawn,
>>
>> Could you check this? If you have rk3288..
>> If it's not working fine, it needs to revert this patch until finding
>> the problem.
>>
>
> Hrmm.....as that patchset was tested based on rk3288 and rk3368, so I
> need to know which board Randy are using now and could you share some
Sorry, XZY has asked me about this in the morning and I answer him that
I would give a feedback at home, so I didn't notice this mail.
The board is Firefly reload. but the reporter told me that Firefly
release also have the same problem.
> log?
>
> I will have a look at it.
>
>
>> Best Regards,
>> Jaehoon Chung
>>
>>>
>>> Best Regards,
>>> Jaehoon Chung
>>>
>>>>
>>>> Signed-off-by: Randy Li <ayaka@soulik.info>
>>>> ---
>>>> drivers/mmc/host/dw_mmc-rockchip.c | 41
>>>> +++-----------------------------------
>>>> 1 file changed, 3 insertions(+), 38 deletions(-)
>>>>
>>>> diff --git a/drivers/mmc/host/dw_mmc-rockchip.c
>>>> b/drivers/mmc/host/dw_mmc-rockchip.c
>>>> index 9a46e46..3189234 100644
>>>> --- a/drivers/mmc/host/dw_mmc-rockchip.c
>>>> +++ b/drivers/mmc/host/dw_mmc-rockchip.c
>>>> @@ -14,7 +14,6 @@
>>>> #include <linux/mmc/dw_mmc.h>
>>>> #include <linux/of_address.h>
>>>> #include <linux/mmc/slot-gpio.h>
>>>> -#include <linux/pm_runtime.h>
>>>> #include <linux/slab.h>
>>>>
>>>> #include "dw_mmc.h"
>>>> @@ -327,7 +326,6 @@ static int dw_mci_rockchip_probe(struct
>>>> platform_device *pdev)
>>>> {
>>>> const struct dw_mci_drv_data *drv_data;
>>>> const struct of_device_id *match;
>>>> - int ret;
>>>>
>>>> if (!pdev->dev.of_node)
>>>> return -ENODEV;
>>>> @@ -335,49 +333,16 @@ static int dw_mci_rockchip_probe(struct
>>>> platform_device *pdev)
>>>> match = of_match_node(dw_mci_rockchip_match, pdev->dev.of_node);
>>>> drv_data = match->data;
>>>>
>>>> - pm_runtime_get_noresume(&pdev->dev);
>>>> - pm_runtime_set_active(&pdev->dev);
>>>> - pm_runtime_enable(&pdev->dev);
>>>> - pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
>>>> - pm_runtime_use_autosuspend(&pdev->dev);
>>>> -
>>>> - ret = dw_mci_pltfm_register(pdev, drv_data);
>>>> - if (ret) {
>>>> - pm_runtime_disable(&pdev->dev);
>>>> - pm_runtime_set_suspended(&pdev->dev);
>>>> - pm_runtime_put_noidle(&pdev->dev);
>>>> - return ret;
>>>> - }
>>>> -
>>>> - pm_runtime_put_autosuspend(&pdev->dev);
>>>> -
>>>> - return 0;
>>>> + return dw_mci_pltfm_register(pdev, drv_data);
>>>> }
>>>>
>>>> -static int dw_mci_rockchip_remove(struct platform_device *pdev)
>>>> -{
>>>> - pm_runtime_get_sync(&pdev->dev);
>>>> - pm_runtime_disable(&pdev->dev);
>>>> - pm_runtime_put_noidle(&pdev->dev);
>>>> -
>>>> - return dw_mci_pltfm_remove(pdev);
>>>> -}
>>>> -
>>>> -static const struct dev_pm_ops dw_mci_rockchip_dev_pm_ops = {
>>>> - SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
>>>> - pm_runtime_force_resume)
>>>> - SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend,
>>>> - dw_mci_runtime_resume,
>>>> - NULL)
>>>> -};
>>>> -
>>>> static struct platform_driver dw_mci_rockchip_pltfm_driver = {
>>>> .probe = dw_mci_rockchip_probe,
>>>> - .remove = dw_mci_rockchip_remove,
>>>> + .remove = dw_mci_pltfm_remove,
>>>> .driver = {
>>>> .name = "dwmmc_rockchip",
>>>> .of_match_table = dw_mci_rockchip_match,
>>>> - .pm = &dw_mci_rockchip_dev_pm_ops,
>>>> + .pm = &dw_mci_pltfm_pmops,
>>>> },
>>>> };
>>>>
>>>>
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>>> the body of a message to majordomo at vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>> .
>>>
>>
>>
>>
>>
>
>
--
Randy Li
The third produce department
===========================================================================
This email message, including any attachments, is for the sole
use of the intended recipient(s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message. [Fuzhou Rockchip Electronics, INC. China mainland]
===========================================================================
^ permalink raw reply
* [PATCH 7/8] ARM: s3c64xx: Drop initialization of unused struct s3c_audio_pdata fields
From: Sylwester Nawrocki @ 2016-12-29 10:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20161228175344.3krz2hqrem56ypg6@kozik-lap>
On 12/28/2016 06:53 PM, Krzysztof Kozlowski wrote:
> On Thu, Nov 10, 2016 at 04:17:55PM +0100, Sylwester Nawrocki wrote:
>> Remove initialization of dma_{filter, playback, capture, capture_mic}
>> fields where it is not used any more.
>>
>> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
>> ---
>> arch/arm/mach-s3c64xx/dev-audio.c | 19 -------------------
>> 1 file changed, 19 deletions(-)
>>
> Sylwester,
>
> This and 8/8 should be safe to apply, right?
Yes, I think both patches can be applied safely now.
Thanks for getting back to this.
^ permalink raw reply
* [PATCH 1/4] pinctrl: dt-bindings: samsung: add drive strength macros for Exynos5433
From: Chanwoo Choi @ 2016-12-29 10:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <37b86cdb-b5e9-a5fa-fbb1-46e8d8c90cd8@samsung.com>
Hi Andi,
On 2016? 12? 29? 18:17, Chanwoo Choi wrote:
> Hi Andi,
>
> On 2016? 12? 29? 17:42, Andi Shyti wrote:
>> Commit 5db7e3bb87df ("pinctrl: dt-bindings: samsung: Add header with
>> values used for configuration") has added a header file for defining the
>> pinctrl values in order to avoid hardcoded settings in the Exynos
>> DTS related files.
>>
>> Extend samsung.h to the Exynos5433 for drive strength values
>> which are strictly related to the particular SoC and may defer
>> from others.
>>
>> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
>> ---
>> include/dt-bindings/pinctrl/samsung.h | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/include/dt-bindings/pinctrl/samsung.h b/include/dt-bindings/pinctrl/samsung.h
>> index 6276eb785e2b..58868313d64b 100644
>> --- a/include/dt-bindings/pinctrl/samsung.h
>> +++ b/include/dt-bindings/pinctrl/samsung.h
>> @@ -45,6 +45,12 @@
>> #define EXYNOS5420_PIN_DRV_LV3 2
>> #define EXYNOS5420_PIN_DRV_LV4 3
>>
>> +/* Drive strengths for Exynos5433 */
>> +#define EXYNOS5433_PIN_DRV_LV1 0
>> +#define EXYNOS5433_PIN_DRV_LV2 1
>> +#define EXYNOS5433_PIN_DRV_LV3 2
>> +#define EXYNOS5433_PIN_DRV_LV4 3
>
> Exynos5433 has the same value with EXYNOS5420. So, I'd like you to use the EXYNOS5420_PIN_DRV_LVx instead of separate the definitions.
I found the problem to handle the *_DRV register of Exynos5433. Because Exynos5433 has the different width length of *_DRV (PINCFG_TYPE_DRV) bitfields from Exynos542x as following. When I was sending the exynos5433 pinctrl patches, I was missing this issue.
Exynos5422/Exynos5410 have two different bitfields in the same register to set the DRV_LVx as following:
(n=0 to 7)
[2n+1:2n] : 2bits
0x0 = 1x,
0x1 = 2x,
0x2 = 3x,
0x3 = 4x,
[n+16:16]
0x0 = Fast Slew Rate,
0x1 = Slow Slew Rate,
But, Exynos5433 has the following value for PIN_DRV_LVx without additional bitfields to separate 'Fast Slew Rate' and 'Slow Slew Rate'. Just exynos5433 defines the 'Fast Slew Rate(0x0 ~ 0x5)' and 'Slow Slew Rate (0x8 ~ 0xF)'.
(n=0 to 7)
[4n+3:4n] : 4 bits
0x0 = Fast Slew Rate 1x
0x1 = Fast Slew Rate 2x
0x2 = Fast Slew Rate 3x
0x3 = Fast Slew Rate 4x
0x4 = Fast Slew Rate 5x
0x5 = Fast Slew Rate 6x
0x8 = Slow Slew Rate 1x
0x9 = Slow Slew Rate 2x
0xA = Slow Slew Rate 3x
0xB = Slow Slew Rate 4x
0xC = Slow Slew Rate 5x
0xF = Slow Slew Rate 6x
So, before this patch, we have to fix it to support the DRV reigster of Exynos5433.
I'll fix it.
>
>> +
>> #define EXYNOS_PIN_FUNC_INPUT 0
>> #define EXYNOS_PIN_FUNC_OUTPUT 1
>> #define EXYNOS_PIN_FUNC_2 2
>>
>
--
Regards,
Chanwoo Choi
^ permalink raw reply
* [PATCH] drm: zte: support hdmi audio through spdif
From: Shawn Guo @ 2016-12-29 11:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CAOw6vbJzKeiTW9haRmiFhJv44pRSMNvvpFUg-4LcfxSuRzo17w@mail.gmail.com>
On Thu, Dec 22, 2016 at 10:18:00AM -0500, Sean Paul wrote:
> On Thu, Dec 22, 2016 at 8:11 AM, Shawn Guo <shawnguo@kernel.org> wrote:
> > +static int zx_hdmi_audio_get_n(unsigned int fs)
> > +{
> > + unsigned int n;
> > +
> > + switch (fs) {
> > + case 32000:
> > + n = 4096;
> > + break;
> > + case 44100:
> > + n = 6272;
> > + break;
> > + case 48000:
> > + n = 6144;
> > + break;
> > + case 88200:
> > + n = 6272 * 2;
> > + break;
> > + case 96000:
> > + n = 6144 * 2;
> > + break;
> > + case 176400:
> > + n = 6272 * 4;
> > + break;
> > + case 192000:
> > + n = 6144 * 4;
> > + break;
> > + default:
> > + n = fs * 128 / 1000;
>
> It seems like this could be distilled down to:
>
> if (fs && (fs % 44100) == 0)
> n = 6272 * (fs / 44100);
> else
> n = fs * 128 / 1000;
Nice! Thanks for the suggestion.
>
> > + }
> > +
> > + return n;
> > +}
> > +
> > +static int zx_hdmi_audio_hw_params(struct device *dev,
> > + void *data,
> > + struct hdmi_codec_daifmt *daifmt,
> > + struct hdmi_codec_params *params)
> > +{
> > + struct zx_hdmi *hdmi = dev_get_drvdata(dev);
> > + struct hdmi_audio_infoframe *cea = ¶ms->cea;
> > + union hdmi_infoframe frame;
> > + int n;
> > +
> > + /* We only support spdif for now */
> > + if (daifmt->fmt != HDMI_SPDIF) {
> > + DRM_DEV_ERROR(hdmi->dev, "invalid daifmt %d\n", daifmt->fmt);
> > + return -EINVAL;
> > + }
> > +
> > + switch (params->sample_width) {
> > + case 16:
> > + hdmi_writeb_mask(hdmi, TPI_AUD_CONFIG, SPDIF_SAMPLE_SIZE_MASK,
> > + SPDIF_SAMPLE_SIZE_16BIT);
> > + break;
> > + case 20:
> > + hdmi_writeb_mask(hdmi, TPI_AUD_CONFIG, SPDIF_SAMPLE_SIZE_MASK,
> > + SPDIF_SAMPLE_SIZE_20BIT);
> > + break;
> > + case 24:
> > + hdmi_writeb_mask(hdmi, TPI_AUD_CONFIG, SPDIF_SAMPLE_SIZE_MASK,
> > + SPDIF_SAMPLE_SIZE_24BIT);
> > + break;
> > + default:
> > + DRM_DEV_ERROR(hdmi->dev, "invalid sample width %d\n",
> > + params->sample_width);
> > + return -EINVAL;
> > + }
> > +
> > + /* CTS is calculated by hardware, and we only need to take care of N */
> > + n = zx_hdmi_audio_get_n(params->sample_rate);
> > + hdmi_writeb(hdmi, N_SVAL1, n & 0xff);
> > + hdmi_writeb(hdmi, N_SVAL2, (n >> 8) && 0xff);
>
> s/&&/&/ ?
Oops! Thanks for catching it.
Shawn
>
> > + hdmi_writeb(hdmi, N_SVAL3, (n >> 16) & 0xf);
> > +
> > + /* Enable spdif mode */
> > + hdmi_writeb_mask(hdmi, AUD_MODE, SPDIF_EN, SPDIF_EN);
> > +
> > + /* Enable audio input */
> > + hdmi_writeb_mask(hdmi, AUD_EN, AUD_IN_EN, AUD_IN_EN);
> > +
> > + memcpy(&frame.audio, cea, sizeof(*cea));
> > +
> > + return zx_hdmi_infoframe_trans(hdmi, &frame, FSEL_AUDIO);
> > +}
^ permalink raw reply
* [PATCH v2] drm: zte: support hdmi audio through spdif
From: Shawn Guo @ 2016-12-29 11:14 UTC (permalink / raw)
To: linux-arm-kernel
From: Shawn Guo <shawn.guo@linaro.org>
It enables HDMI audio support through SPDIF interface based on generic
hdmi-audio-codec driver. The HDMI hardware supports more audio
interfaces than SPDIF, like I2S, which may be added later.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
Changes for v2:
- Distll the function zx_hdmi_audio_get_n() per Sean's suggestion and
make it inline.
- Fix the operator typo on N_SVAL2 register write.
drivers/gpu/drm/zte/Kconfig | 1 +
drivers/gpu/drm/zte/zx_hdmi.c | 148 +++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/zte/zx_hdmi_regs.h | 14 ++++
drivers/gpu/drm/zte/zx_vou.c | 9 +++
drivers/gpu/drm/zte/zx_vou.h | 10 +++
drivers/gpu/drm/zte/zx_vou_regs.h | 2 +
6 files changed, 184 insertions(+)
diff --git a/drivers/gpu/drm/zte/Kconfig b/drivers/gpu/drm/zte/Kconfig
index 4065b2840f1c..ed6de4b10c74 100644
--- a/drivers/gpu/drm/zte/Kconfig
+++ b/drivers/gpu/drm/zte/Kconfig
@@ -4,5 +4,6 @@ config DRM_ZTE
select DRM_KMS_CMA_HELPER
select DRM_KMS_FB_HELPER
select DRM_KMS_HELPER
+ select SND_SOC_HDMI_CODEC if SND_SOC
help
Choose this option to enable DRM on ZTE ZX SoCs.
diff --git a/drivers/gpu/drm/zte/zx_hdmi.c b/drivers/gpu/drm/zte/zx_hdmi.c
index 6bf6c364811e..c20121846073 100644
--- a/drivers/gpu/drm/zte/zx_hdmi.c
+++ b/drivers/gpu/drm/zte/zx_hdmi.c
@@ -25,6 +25,8 @@
#include <drm/drm_of.h>
#include <drm/drmP.h>
+#include <sound/hdmi-codec.h>
+
#include "zx_hdmi_regs.h"
#include "zx_vou.h"
@@ -49,6 +51,7 @@ struct zx_hdmi {
bool sink_is_hdmi;
bool sink_has_audio;
const struct vou_inf *inf;
+ struct platform_device *audio_pdev;
};
#define to_zx_hdmi(x) container_of(x, struct zx_hdmi, x)
@@ -366,6 +369,142 @@ static irqreturn_t zx_hdmi_irq_handler(int irq, void *dev_id)
return IRQ_NONE;
}
+static int zx_hdmi_audio_startup(struct device *dev, void *data)
+{
+ struct zx_hdmi *hdmi = dev_get_drvdata(dev);
+ struct drm_encoder *encoder = &hdmi->encoder;
+
+ vou_inf_hdmi_audio_sel(encoder->crtc, VOU_HDMI_AUD_SPDIF);
+
+ return 0;
+}
+
+static void zx_hdmi_audio_shutdown(struct device *dev, void *data)
+{
+ struct zx_hdmi *hdmi = dev_get_drvdata(dev);
+
+ /* Disable audio input */
+ hdmi_writeb_mask(hdmi, AUD_EN, AUD_IN_EN, 0);
+}
+
+static inline int zx_hdmi_audio_get_n(unsigned int fs)
+{
+ unsigned int n;
+
+ if (fs && (fs % 44100) == 0)
+ n = 6272 * (fs / 44100);
+ else
+ n = fs * 128 / 1000;
+
+ return n;
+}
+
+static int zx_hdmi_audio_hw_params(struct device *dev,
+ void *data,
+ struct hdmi_codec_daifmt *daifmt,
+ struct hdmi_codec_params *params)
+{
+ struct zx_hdmi *hdmi = dev_get_drvdata(dev);
+ struct hdmi_audio_infoframe *cea = ¶ms->cea;
+ union hdmi_infoframe frame;
+ int n;
+
+ /* We only support spdif for now */
+ if (daifmt->fmt != HDMI_SPDIF) {
+ DRM_DEV_ERROR(hdmi->dev, "invalid daifmt %d\n", daifmt->fmt);
+ return -EINVAL;
+ }
+
+ switch (params->sample_width) {
+ case 16:
+ hdmi_writeb_mask(hdmi, TPI_AUD_CONFIG, SPDIF_SAMPLE_SIZE_MASK,
+ SPDIF_SAMPLE_SIZE_16BIT);
+ break;
+ case 20:
+ hdmi_writeb_mask(hdmi, TPI_AUD_CONFIG, SPDIF_SAMPLE_SIZE_MASK,
+ SPDIF_SAMPLE_SIZE_20BIT);
+ break;
+ case 24:
+ hdmi_writeb_mask(hdmi, TPI_AUD_CONFIG, SPDIF_SAMPLE_SIZE_MASK,
+ SPDIF_SAMPLE_SIZE_24BIT);
+ break;
+ default:
+ DRM_DEV_ERROR(hdmi->dev, "invalid sample width %d\n",
+ params->sample_width);
+ return -EINVAL;
+ }
+
+ /* CTS is calculated by hardware, and we only need to take care of N */
+ n = zx_hdmi_audio_get_n(params->sample_rate);
+ hdmi_writeb(hdmi, N_SVAL1, n & 0xff);
+ hdmi_writeb(hdmi, N_SVAL2, (n >> 8) & 0xff);
+ hdmi_writeb(hdmi, N_SVAL3, (n >> 16) & 0xf);
+
+ /* Enable spdif mode */
+ hdmi_writeb_mask(hdmi, AUD_MODE, SPDIF_EN, SPDIF_EN);
+
+ /* Enable audio input */
+ hdmi_writeb_mask(hdmi, AUD_EN, AUD_IN_EN, AUD_IN_EN);
+
+ memcpy(&frame.audio, cea, sizeof(*cea));
+
+ return zx_hdmi_infoframe_trans(hdmi, &frame, FSEL_AUDIO);
+}
+
+static int zx_hdmi_audio_digital_mute(struct device *dev, void *data,
+ bool enable)
+{
+ struct zx_hdmi *hdmi = dev_get_drvdata(dev);
+
+ if (enable)
+ hdmi_writeb_mask(hdmi, TPI_AUD_CONFIG, TPI_AUD_MUTE,
+ TPI_AUD_MUTE);
+ else
+ hdmi_writeb_mask(hdmi, TPI_AUD_CONFIG, TPI_AUD_MUTE, 0);
+
+ return 0;
+}
+
+static int zx_hdmi_audio_get_eld(struct device *dev, void *data,
+ uint8_t *buf, size_t len)
+{
+ struct zx_hdmi *hdmi = dev_get_drvdata(dev);
+ struct drm_connector *connector = &hdmi->connector;
+
+ memcpy(buf, connector->eld, min(sizeof(connector->eld), len));
+
+ return 0;
+}
+
+static const struct hdmi_codec_ops zx_hdmi_codec_ops = {
+ .audio_startup = zx_hdmi_audio_startup,
+ .hw_params = zx_hdmi_audio_hw_params,
+ .audio_shutdown = zx_hdmi_audio_shutdown,
+ .digital_mute = zx_hdmi_audio_digital_mute,
+ .get_eld = zx_hdmi_audio_get_eld,
+};
+
+static struct hdmi_codec_pdata zx_hdmi_codec_pdata = {
+ .ops = &zx_hdmi_codec_ops,
+ .spdif = 1,
+};
+
+static int zx_hdmi_audio_register(struct zx_hdmi *hdmi)
+{
+ struct platform_device *pdev;
+
+ pdev = platform_device_register_data(hdmi->dev, HDMI_CODEC_DRV_NAME,
+ PLATFORM_DEVID_AUTO,
+ &zx_hdmi_codec_pdata,
+ sizeof(zx_hdmi_codec_pdata));
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ hdmi->audio_pdev = pdev;
+
+ return 0;
+}
+
static int zx_hdmi_i2c_read(struct zx_hdmi *hdmi, struct i2c_msg *msg)
{
int len = msg->len;
@@ -566,6 +705,12 @@ static int zx_hdmi_bind(struct device *dev, struct device *master, void *data)
return ret;
}
+ ret = zx_hdmi_audio_register(hdmi);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "failed to register audio: %d\n", ret);
+ return ret;
+ }
+
ret = zx_hdmi_register(drm, hdmi);
if (ret) {
DRM_DEV_ERROR(dev, "failed to register hdmi: %d\n", ret);
@@ -590,6 +735,9 @@ static void zx_hdmi_unbind(struct device *dev, struct device *master,
hdmi->connector.funcs->destroy(&hdmi->connector);
hdmi->encoder.funcs->destroy(&hdmi->encoder);
+
+ if (hdmi->audio_pdev)
+ platform_device_unregister(hdmi->audio_pdev);
}
static const struct component_ops zx_hdmi_component_ops = {
diff --git a/drivers/gpu/drm/zte/zx_hdmi_regs.h b/drivers/gpu/drm/zte/zx_hdmi_regs.h
index de911f66b658..c6d5d8211725 100644
--- a/drivers/gpu/drm/zte/zx_hdmi_regs.h
+++ b/drivers/gpu/drm/zte/zx_hdmi_regs.h
@@ -52,5 +52,19 @@
#define TPI_INFO_TRANS_RPT BIT(6)
#define TPI_DDC_MASTER_EN 0x06f8
#define HW_DDC_MASTER BIT(7)
+#define N_SVAL1 0xa03
+#define N_SVAL2 0xa04
+#define N_SVAL3 0xa05
+#define AUD_EN 0xa13
+#define AUD_IN_EN BIT(0)
+#define AUD_MODE 0xa14
+#define SPDIF_EN BIT(1)
+#define TPI_AUD_CONFIG 0xa62
+#define SPDIF_SAMPLE_SIZE_SHIFT 6
+#define SPDIF_SAMPLE_SIZE_MASK (0x3 << SPDIF_SAMPLE_SIZE_SHIFT)
+#define SPDIF_SAMPLE_SIZE_16BIT (0x1 << SPDIF_SAMPLE_SIZE_SHIFT)
+#define SPDIF_SAMPLE_SIZE_20BIT (0x2 << SPDIF_SAMPLE_SIZE_SHIFT)
+#define SPDIF_SAMPLE_SIZE_24BIT (0x3 << SPDIF_SAMPLE_SIZE_SHIFT)
+#define TPI_AUD_MUTE BIT(4)
#endif /* __ZX_HDMI_REGS_H__ */
diff --git a/drivers/gpu/drm/zte/zx_vou.c b/drivers/gpu/drm/zte/zx_vou.c
index 73fe15c17c32..f89ad7f72fdb 100644
--- a/drivers/gpu/drm/zte/zx_vou.c
+++ b/drivers/gpu/drm/zte/zx_vou.c
@@ -119,6 +119,15 @@ static inline struct zx_vou_hw *crtc_to_vou(struct drm_crtc *crtc)
return zcrtc->vou;
}
+void vou_inf_hdmi_audio_sel(struct drm_crtc *crtc,
+ enum vou_inf_hdmi_audio aud)
+{
+ struct zx_crtc *zcrtc = to_zx_crtc(crtc);
+ struct zx_vou_hw *vou = zcrtc->vou;
+
+ zx_writel_mask(vou->vouctl + VOU_INF_HDMI_CTRL, VOU_HDMI_AUD_MASK, aud);
+}
+
void vou_inf_enable(const struct vou_inf *inf, struct drm_crtc *crtc)
{
struct zx_crtc *zcrtc = to_zx_crtc(crtc);
diff --git a/drivers/gpu/drm/zte/zx_vou.h b/drivers/gpu/drm/zte/zx_vou.h
index 349e06cd86f4..e571b888a3ca 100644
--- a/drivers/gpu/drm/zte/zx_vou.h
+++ b/drivers/gpu/drm/zte/zx_vou.h
@@ -30,6 +30,14 @@ enum vou_inf_data_sel {
VOU_RGB_666 = 3,
};
+enum vou_inf_hdmi_audio {
+ VOU_HDMI_AUD_SPDIF = BIT(0),
+ VOU_HDMI_AUD_I2S = BIT(1),
+ VOU_HDMI_AUD_DSD = BIT(2),
+ VOU_HDMI_AUD_HBR = BIT(3),
+ VOU_HDMI_AUD_PARALLEL = BIT(4),
+};
+
struct vou_inf {
enum vou_inf_id id;
enum vou_inf_data_sel data_sel;
@@ -37,6 +45,8 @@ struct vou_inf {
u32 clocks_sel_bits;
};
+void vou_inf_hdmi_audio_sel(struct drm_crtc *crtc,
+ enum vou_inf_hdmi_audio aud);
void vou_inf_enable(const struct vou_inf *inf, struct drm_crtc *crtc);
void vou_inf_disable(const struct vou_inf *inf, struct drm_crtc *crtc);
diff --git a/drivers/gpu/drm/zte/zx_vou_regs.h b/drivers/gpu/drm/zte/zx_vou_regs.h
index f44e7a4ae441..15b73cd3a612 100644
--- a/drivers/gpu/drm/zte/zx_vou_regs.h
+++ b/drivers/gpu/drm/zte/zx_vou_regs.h
@@ -150,6 +150,8 @@
#define VOU_CLK_GL0_SEL BIT(4)
#define VOU_CLK_REQEN 0x20
#define VOU_CLK_EN 0x24
+#define VOU_INF_HDMI_CTRL 0x30
+#define VOU_HDMI_AUD_MASK 0x1f
/* OTFPPU_CTRL registers */
#define OTFPPU_RSZ_DATA_SOURCE 0x04
--
1.9.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox