* [PATCH] ARM: Fix rd_size declaration
From: Bart Van Assche @ 2017-04-26 20:51 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20170417231003.7178-1-bart.vanassche@sandisk.com>
On Mon, 2017-04-17 at 16:10 -0700, Bart Van Assche wrote:
> The global variable 'rd_size' is declared as 'int' in source file
> arch/arm/kernel/atags_parse.c and as 'unsigned long' in
> drivers/block/brd.c. Fix this inconsistency.
> [ ... ]
Hello Russell,
Have I sent this patch to the right maintainer?
Thanks,
Bart.
^ permalink raw reply
* [PATCH] ARM: Fix __show_regs output timestamps
From: Andreas Kemnade @ 2017-04-26 20:18 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <61817479ac8c4c6c8be702d2e2136fddac1b1821.1493228290.git.joe@perches.com>
On Wed, 26 Apr 2017 10:39:49 -0700
Joe Perches <joe@perches.com> wrote:
> Multiple line formats are not preferred as the second and
> subsequent lines may not have timestamps.
>
> Lacking timestamps makes reading the output a bit difficult.
> This also makes arm/arm64 output more similar.
>
> Previous:
>
> [ 1514.093231] pc : [<bf79c304>] lr : [<bf79ced8>] psr: a00f0013
> sp : ecdd7e20 ip : 00000000 fp : ffffffff
>
> New:
>
> [ 1514.093231] pc : [<bf79c304>] lr : [<bf79ced8>] psr: a00f0013
> [ 1514.105316] sp : ecdd7e20 ip : 00000000 fp : ffffffff
>
[ 102.669036] PC is at hso_start_net_device+0x50/0xc0 [hso]
[ 102.674835] LR is at hso_net_open+0x68/0x84 [hso]
[ 102.679809] pc : [<bf785304>] lr : [<bf785ed8>] psr: a00b0013
[ 102.686462] sp : ed047e20 ip : 00000000 fp : ffffffff
yes, the kernel oopses in a nicer way.
Tested-by: Andreas Kemnade <andreas@kemnade.info>
Regards,
Andreas Kemnade
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
> arch/arm/kernel/process.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
> index 939e8b58c59d..151cece4a293 100644
> --- a/arch/arm/kernel/process.c
> +++ b/arch/arm/kernel/process.c
> @@ -123,10 +123,10 @@ void __show_regs(struct pt_regs *regs)
>
> print_symbol("PC is at %s\n", instruction_pointer(regs));
> print_symbol("LR is at %s\n", regs->ARM_lr);
> - printk("pc : [<%08lx>] lr : [<%08lx>] psr: %08lx\n"
> - "sp : %08lx ip : %08lx fp : %08lx\n",
> - regs->ARM_pc, regs->ARM_lr, regs->ARM_cpsr,
> - regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
> + printk("pc : [<%08lx>] lr : [<%08lx>] psr: %08lx\n",
> + regs->ARM_pc, regs->ARM_lr, regs->ARM_cpsr);
> + printk("sp : %08lx ip : %08lx fp : %08lx\n",
> + regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
> printk("r10: %08lx r9 : %08lx r8 : %08lx\n",
> regs->ARM_r10, regs->ARM_r9,
> regs->ARM_r8);
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170426/f3f55261/attachment.sig>
^ permalink raw reply
* [PATCH v3 5/5] ARM: sun4i: Convert to CCU
From: Priit Laes @ 2017-04-26 19:32 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.908ce010a25e503bb5ad0967759c723219c6ed0d.1493235134.git-series.plaes@plaes.org>
Convert sun4i-a10.dtsi to new CCU driver.
Tested on Gemei G9 tablet.
Signed-off-by: Priit Laes <plaes@plaes.org>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 645 +++-----------------------------
1 file changed, 74 insertions(+), 571 deletions(-)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index b63668e..feb104e 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -45,7 +45,8 @@
#include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
#include <dt-bindings/dma/sun4i-a10.h>
/ {
@@ -64,9 +65,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&de_be0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -74,10 +75,11 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
+ <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -85,9 +87,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0";
- clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+ <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
+ <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -95,11 +98,11 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
- clocks = <&ahb_gates 34>, <&ahb_gates 36>,
- <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 5>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
+ <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
};
@@ -111,7 +114,7 @@
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
- clocks = <&cpu>;
+ clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
@@ -167,18 +170,6 @@
#size-cells = <1>;
ranges;
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- dummy: dummy {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
osc24M: clk at 01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-osc-clk";
@@ -187,487 +178,12 @@
clock-output-names = "osc24M";
};
- osc3M: osc3M_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc3M";
- };
-
osc32k: clk at 0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
-
- pll1: clk at 01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll2: clk at 01c20008 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll2-clk";
- reg = <0x01c20008 0x8>;
- clocks = <&osc24M>;
- clock-output-names = "pll2-1x", "pll2-2x",
- "pll2-4x", "pll2-8x";
- };
-
- pll3: clk at 01c20010 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20010 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll3";
- };
-
- pll3x2: pll3x2_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <2>;
- clocks = <&pll3>;
- clock-output-names = "pll3-2x";
- };
-
- pll4: clk at 01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk at 01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk at 01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
- };
-
- pll7: clk at 01c20030 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20030 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll7";
- };
-
- pll7x2: pll7x2_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <2>;
- clocks = <&pll7>;
- clock-output-names = "pll7-2x";
- };
-
- /* dummy is 200M */
- cpu: cpu at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
- clock-output-names = "cpu";
- };
-
- axi: axi at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- axi_gates: clk at 01c2005c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
- clock-indices = <0>;
- clock-output-names = "axi_dram";
- };
-
- ahb: ahb at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
- clock-output-names = "ahb";
- };
-
- ahb_gates: clk at 01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-indices = <0>, <1>,
- <2>, <3>,
- <4>, <5>, <6>,
- <7>, <8>, <9>,
- <10>, <11>, <12>,
- <13>, <14>, <16>,
- <17>, <18>, <20>,
- <21>, <22>, <23>,
- <24>, <25>, <26>,
- <32>, <33>, <34>,
- <35>, <36>, <37>,
- <40>, <41>, <43>,
- <44>, <45>,
- <46>, <47>,
- <50>, <52>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
- "ahb_ohci0", "ahb_ehci1",
- "ahb_ohci1", "ahb_ss", "ahb_dma",
- "ahb_bist", "ahb_mmc0", "ahb_mmc1",
- "ahb_mmc2", "ahb_mmc3", "ahb_ms",
- "ahb_nand", "ahb_sdram", "ahb_ace",
- "ahb_emac", "ahb_ts", "ahb_spi0",
- "ahb_spi1", "ahb_spi2", "ahb_spi3",
- "ahb_pata", "ahb_sata", "ahb_gps",
- "ahb_ve", "ahb_tvd", "ahb_tve0",
- "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
- "ahb_csi0", "ahb_csi1", "ahb_hdmi",
- "ahb_de_be0", "ahb_de_be1",
- "ahb_de_fe0", "ahb_de_fe1",
- "ahb_mp", "ahb_mali400";
- };
-
- apb0: apb0 at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
- };
-
- apb0_gates: clk at 01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-indices = <0>, <1>,
- <2>, <3>,
- <5>, <6>,
- <7>, <10>;
- clock-output-names = "apb0_codec", "apb0_spdif",
- "apb0_ac97", "apb0_iis",
- "apb0_pio", "apb0_ir0",
- "apb0_ir1", "apb0_keypad";
- };
-
- apb1: clk at 01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
- };
-
- apb1_gates: clk at 01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <4>,
- <5>, <6>,
- <7>, <16>,
- <17>, <18>,
- <19>, <20>,
- <21>, <22>,
- <23>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_can",
- "apb1_scr", "apb1_ps20",
- "apb1_ps21", "apb1_uart0",
- "apb1_uart1", "apb1_uart2",
- "apb1_uart3", "apb1_uart4",
- "apb1_uart5", "apb1_uart6",
- "apb1_uart7";
- };
-
- nand_clk: clk at 01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk at 01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk at 01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk at 01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk at 01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- mmc3_clk: clk at 01c20094 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc3",
- "mmc3_output",
- "mmc3_sample";
- };
-
- ts_clk: clk at 01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk at 01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk at 01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk at 01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk at 01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- pata_clk: clk at 01c200ac {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "pata";
- };
-
- ir0_clk: clk at 01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- ir1_clk: clk at 01c200b4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir1";
- };
-
- spdif_clk: clk at 01c200c0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200c0 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "spdif";
- };
-
- usb_clk: clk at 01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1",
- "usb_phy";
- };
-
- spi3_clk: clk at 01c200d4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200d4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi3";
- };
-
- dram_gates: clk at 01c20100 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-dram-gates-clk";
- reg = <0x01c20100 0x4>;
- clocks = <&pll5 0>;
- clock-indices = <0>,
- <1>, <2>,
- <3>,
- <4>,
- <5>, <6>,
- <15>,
- <24>, <25>,
- <26>, <27>,
- <28>, <29>;
- clock-output-names = "dram_ve",
- "dram_csi0", "dram_csi1",
- "dram_ts",
- "dram_tvd",
- "dram_tve0", "dram_tve1",
- "dram_output",
- "dram_de_fe1", "dram_de_fe0",
- "dram_de_be0", "dram_de_be1",
- "dram_de_mp", "dram_ace";
- };
-
- de_be0_clk: clk at 01c20104 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20104 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be0";
- };
-
- de_be1_clk: clk at 01c20108 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20108 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be1";
- };
-
- de_fe0_clk: clk at 01c2010c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c2010c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe0";
- };
-
- de_fe1_clk: clk at 01c20110 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20110 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe1";
- };
-
-
- tcon0_ch0_clk: clk at 01c20118 {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c20118 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch0-sclk";
-
- };
-
- tcon1_ch0_clk: clk at 01c2011c {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c2011c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch0-sclk";
-
- };
-
- tcon0_ch1_clk: clk at 01c2012c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c2012c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch1-sclk";
-
- };
-
- tcon1_ch1_clk: clk at 01c20130 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c20130 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch1-sclk";
-
- };
-
- ve_clk: clk at 01c2013c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-ve-clk";
- reg = <0x01c2013c 0x4>;
- clocks = <&pll4>;
- clock-output-names = "ve";
- };
-
- codec_clk: clk at 01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
- reg = <0x01c20140 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "codec";
- };
};
soc at 01c00000 {
@@ -716,7 +232,7 @@
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <27>;
- clocks = <&ahb_gates 6>;
+ clocks = <&ccu CLK_AHB_DMA>;
#dma-cells = <2>;
};
@@ -724,7 +240,7 @@
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <37>;
- clocks = <&ahb_gates 13>, <&nand_clk>;
+ clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
dma-names = "rxtx";
@@ -737,7 +253,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <10>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
@@ -751,7 +267,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <11>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
@@ -765,7 +281,7 @@
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
- clocks = <&ahb_gates 17>;
+ clocks = <&ccu CLK_AHB_EMAC>;
allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
@@ -781,14 +297,8 @@
mmc0: mmc at 01c0f000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
interrupts = <32>;
status = "disabled";
#address-cells = <1>;
@@ -798,14 +308,8 @@
mmc1: mmc at 01c10000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
interrupts = <33>;
status = "disabled";
#address-cells = <1>;
@@ -815,14 +319,8 @@
mmc2: mmc at 01c11000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
interrupts = <34>;
status = "disabled";
#address-cells = <1>;
@@ -832,14 +330,8 @@
mmc3: mmc at 01c12000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c12000 0x1000>;
- clocks = <&ahb_gates 11>,
- <&mmc3_clk 0>,
- <&mmc3_clk 1>,
- <&mmc3_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu CLK_AHB_MMC3>, <&ccu CLK_MMC3>;
+ clock-names = "ahb", "mmc";
interrupts = <35>;
status = "disabled";
#address-cells = <1>;
@@ -849,7 +341,7 @@
usb_otg: usb at 01c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
- clocks = <&ahb_gates 0>;
+ clocks = <&ccu CLK_AHB_OTG>;
interrupts = <38>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@@ -864,9 +356,11 @@
compatible = "allwinner,sun4i-a10-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
- clocks = <&usb_clk 8>;
+ clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
@@ -875,7 +369,7 @@
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <39>;
- clocks = <&ahb_gates 1>;
+ clocks = <&ccu CLK_AHB_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -885,7 +379,7 @@
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <64>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -895,7 +389,7 @@
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <86>;
- clocks = <&ahb_gates 5>, <&ss_clk>;
+ clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
clock-names = "ahb", "mod";
};
@@ -903,7 +397,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <12>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
@@ -917,7 +411,7 @@
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
interrupts = <56>;
- clocks = <&pll6 0>, <&ahb_gates 25>;
+ clocks = <&ccu CLK_AHB_SATA>;
status = "disabled";
};
@@ -925,7 +419,7 @@
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <40>;
- clocks = <&ahb_gates 3>;
+ clocks = <&ccu CLK_AHB_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -935,7 +429,7 @@
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <65>;
- clocks = <&usb_clk 7>, <&ahb_gates 4>;
+ clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -945,7 +439,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
interrupts = <50>;
- clocks = <&ahb_gates 23>, <&spi3_clk>;
+ clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 31>,
<&dma SUN4I_DMA_DEDICATED 30>;
@@ -955,6 +449,15 @@
#size-cells = <0>;
};
+ ccu: clock at 01c20000 {
+ compatible = "allwinner,sun4i-a10-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
intc: interrupt-controller at 01c20400 {
compatible = "allwinner,sun4i-a10-ic";
reg = <0x01c20400 0x400>;
@@ -966,7 +469,7 @@
compatible = "allwinner,sun4i-a10-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <28>;
- clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -1149,7 +652,7 @@
compatible = "allwinner,sun4i-a10-spdif";
reg = <0x01c21000 0x400>;
interrupts = <13>;
- clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma SUN4I_DMA_NORMAL 2>,
<&dma SUN4I_DMA_NORMAL 2>;
@@ -1159,7 +662,7 @@
ir0: ir at 01c21800 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
clock-names = "apb", "ir";
interrupts = <5>;
reg = <0x01c21800 0x40>;
@@ -1168,7 +671,7 @@
ir1: ir at 01c21c00 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
clock-names = "apb", "ir";
interrupts = <6>;
reg = <0x01c21c00 0x40>;
@@ -1187,7 +690,7 @@
compatible = "allwinner,sun4i-a10-codec";
reg = <0x01c22c00 0x40>;
interrupts = <30>;
- clocks = <&apb0_gates 0>, <&codec_clk>;
+ clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
@@ -1213,7 +716,7 @@
interrupts = <1>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 16>;
+ clocks = <&ccu CLK_APB1_UART0>;
status = "disabled";
};
@@ -1223,7 +726,7 @@
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
+ clocks = <&ccu CLK_APB1_UART1>;
status = "disabled";
};
@@ -1233,7 +736,7 @@
interrupts = <3>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
+ clocks = <&ccu CLK_APB1_UART2>;
status = "disabled";
};
@@ -1243,7 +746,7 @@
interrupts = <4>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
+ clocks = <&ccu CLK_APB1_UART3>;
status = "disabled";
};
@@ -1253,7 +756,7 @@
interrupts = <17>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 20>;
+ clocks = <&ccu CLK_APB1_UART4>;
status = "disabled";
};
@@ -1263,7 +766,7 @@
interrupts = <18>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 21>;
+ clocks = <&ccu CLK_APB1_UART5>;
status = "disabled";
};
@@ -1273,7 +776,7 @@
interrupts = <19>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 22>;
+ clocks = <&ccu CLK_APB1_UART6>;
status = "disabled";
};
@@ -1283,7 +786,7 @@
interrupts = <20>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 23>;
+ clocks = <&ccu CLK_APB1_UART7>;
status = "disabled";
};
@@ -1291,7 +794,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a000 0x400>;
interrupts = <62>;
- clocks = <&apb1_gates 6>;
+ clocks = <&ccu CLK_APB1_PS20>;
status = "disabled";
};
@@ -1299,7 +802,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a400 0x400>;
interrupts = <63>;
- clocks = <&apb1_gates 7>;
+ clocks = <&ccu CLK_APB1_PS21>;
status = "disabled";
};
@@ -1307,7 +810,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
- clocks = <&apb1_gates 0>;
+ clocks = <&ccu CLK_APB1_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1317,7 +820,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <8>;
- clocks = <&apb1_gates 1>;
+ clocks = <&ccu CLK_APB1_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1327,7 +830,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <9>;
- clocks = <&apb1_gates 2>;
+ clocks = <&ccu CLK_APB1_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1337,7 +840,7 @@
compatible = "allwinner,sun4i-a10-can";
reg = <0x01c2bc00 0x400>;
interrupts = <26>;
- clocks = <&apb1_gates 4>;
+ clocks = <&ccu CLK_APB1_CAN>;
status = "disabled";
};
};
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH v3 4/5] ARM: sun7i: Convert to CCU
From: Priit Laes @ 2017-04-26 19:32 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.908ce010a25e503bb5ad0967759c723219c6ed0d.1493235134.git-series.plaes@plaes.org>
Convert sun7i-a20.dtsi to new CCU driver.
Tested on Cubietruck.
Signed-off-by: Priit Laes <plaes@plaes.org>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 720 +++-----------------------------
1 file changed, 86 insertions(+), 634 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 93aa559..7590cc4 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -47,7 +47,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
#include <dt-bindings/dma/sun4i-a10.h>
/ {
@@ -66,9 +67,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&de_be0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>,
+ <&ccu CLK_HDMI>;
status = "disabled";
};
@@ -76,9 +78,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
- clocks = <&ahb_gates 36>, <&ahb_gates 44>,
- <&de_be0_clk>, <&tcon0_ch0_clk>,
- <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>,
+ <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -86,10 +88,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
- clocks = <&ahb_gates 34>, <&ahb_gates 36>,
- <&ahb_gates 44>,
- <&de_be0_clk>, <&tcon0_ch1_clk>,
- <&dram_gates 5>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+ <&ccu CLK_AHB_DE_BE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>,
+ <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
};
@@ -102,7 +104,7 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
- clocks = <&cpu>;
+ clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
@@ -183,21 +185,11 @@
osc24M: clk@01c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
+ compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
- osc3M: osc3M_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <8>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc3M";
- };
-
osc32k: clk at 0 {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -205,528 +197,6 @@
clock-output-names = "osc32k";
};
- pll1: clk at 01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll2: clk at 01c20008 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll2-clk";
- reg = <0x01c20008 0x8>;
- clocks = <&osc24M>;
- clock-output-names = "pll2-1x", "pll2-2x",
- "pll2-4x", "pll2-8x";
- };
-
- pll3: clk at 01c20010 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20010 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll3";
- };
-
- pll3x2: pll3x2_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&pll3>;
- clock-div = <1>;
- clock-mult = <2>;
- clock-output-names = "pll3-2x";
- };
-
- pll4: clk at 01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-pll4-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk at 01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk at 01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6",
- "pll6_div_4";
- };
-
- pll7: clk at 01c20030 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20030 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll7";
- };
-
- pll7x2: pll7x2_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&pll7>;
- clock-div = <1>;
- clock-mult = <2>;
- clock-output-names = "pll7-2x";
- };
-
- pll8: clk at 01c20040 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-pll4-clk";
- reg = <0x01c20040 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll8";
- };
-
- cpu: cpu at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
- clock-output-names = "cpu";
- };
-
- axi: axi at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- ahb: ahb at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>, <&pll6 3>, <&pll6 1>;
- clock-output-names = "ahb";
- /*
- * Use PLL6 as parent, instead of CPU/AXI
- * which has rate changes due to cpufreq
- */
- assigned-clocks = <&ahb>;
- assigned-clock-parents = <&pll6 3>;
- };
-
- ahb_gates: clk at 01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>, <8>,
- <9>, <10>, <11>, <12>,
- <13>, <14>, <16>,
- <17>, <18>, <20>, <21>,
- <22>, <23>, <25>,
- <28>, <32>, <33>, <34>,
- <35>, <36>, <37>, <40>,
- <41>, <42>, <43>,
- <44>, <45>, <46>,
- <47>, <49>, <50>,
- <52>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
- "ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
- "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
- "ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
- "ahb_nand", "ahb_sdram", "ahb_ace",
- "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
- "ahb_spi2", "ahb_spi3", "ahb_sata",
- "ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
- "ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
- "ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
- "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
- "ahb_de_fe1", "ahb_gmac", "ahb_mp",
- "ahb_mali";
- };
-
- apb0: apb0 at 01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
- };
-
- apb0_gates: clk at 01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>,
- <8>, <10>;
- clock-output-names = "apb0_codec", "apb0_spdif",
- "apb0_ac97", "apb0_i2s0", "apb0_i2s1",
- "apb0_pio", "apb0_ir0", "apb0_ir1",
- "apb0_i2s2", "apb0_keypad";
- };
-
- apb1: clk at 01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
- };
-
- apb1_gates: clk at 01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>,
- <15>, <16>, <17>,
- <18>, <19>, <20>,
- <21>, <22>, <23>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_i2c3", "apb1_can",
- "apb1_scr", "apb1_ps20", "apb1_ps21",
- "apb1_i2c4", "apb1_uart0", "apb1_uart1",
- "apb1_uart2", "apb1_uart3", "apb1_uart4",
- "apb1_uart5", "apb1_uart6", "apb1_uart7";
- };
-
- nand_clk: clk at 01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk at 01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk at 01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk at 01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk at 01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- mmc3_clk: clk at 01c20094 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc3",
- "mmc3_output",
- "mmc3_sample";
- };
-
- ts_clk: clk at 01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk at 01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk at 01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk at 01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk at 01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- pata_clk: clk at 01c200ac {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "pata";
- };
-
- ir0_clk: clk at 01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- ir1_clk: clk at 01c200b4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir1";
- };
-
- i2s0_clk: clk at 01c200b8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200b8 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s0";
- };
-
- ac97_clk: clk at 01c200bc {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200bc 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "ac97";
- };
-
- spdif_clk: clk at 01c200c0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200c0 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "spdif";
- };
-
- keypad_clk: clk at 01c200c4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200c4 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "keypad";
- };
-
- usb_clk: clk at 01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1",
- "usb_phy";
- };
-
- spi3_clk: clk at 01c200d4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200d4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi3";
- };
-
- i2s1_clk: clk at 01c200d8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200d8 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s1";
- };
-
- i2s2_clk: clk at 01c200dc {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200dc 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s2";
- };
-
- dram_gates: clk at 01c20100 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-dram-gates-clk";
- reg = <0x01c20100 0x4>;
- clocks = <&pll5 0>;
- clock-indices = <0>,
- <1>, <2>,
- <3>,
- <4>,
- <5>, <6>,
- <15>,
- <24>, <25>,
- <26>, <27>,
- <28>, <29>;
- clock-output-names = "dram_ve",
- "dram_csi0", "dram_csi1",
- "dram_ts",
- "dram_tvd",
- "dram_tve0", "dram_tve1",
- "dram_output",
- "dram_de_fe1", "dram_de_fe0",
- "dram_de_be0", "dram_de_be1",
- "dram_de_mp", "dram_ace";
- };
-
- de_be0_clk: clk at 01c20104 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20104 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be0";
- };
-
- de_be1_clk: clk at 01c20108 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20108 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be1";
- };
-
- de_fe0_clk: clk at 01c2010c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c2010c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe0";
- };
-
- de_fe1_clk: clk at 01c20110 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20110 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe1";
- };
-
- tcon0_ch0_clk: clk at 01c20118 {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c20118 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch0-sclk";
-
- };
-
- tcon1_ch0_clk: clk at 01c2011c {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c2011c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch0-sclk";
-
- };
-
- tcon0_ch1_clk: clk at 01c2012c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c2012c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch1-sclk";
-
- };
-
- tcon1_ch1_clk: clk at 01c20130 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c20130 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch1-sclk";
-
- };
-
- ve_clk: clk at 01c2013c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-ve-clk";
- reg = <0x01c2013c 0x4>;
- clocks = <&pll4>;
- clock-output-names = "ve";
- };
-
- codec_clk: clk at 01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
- reg = <0x01c20140 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "codec";
- };
-
- mbus_clk: clk at 01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-mbus-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
- clock-output-names = "mbus";
- };
-
/*
* The following two are dummy clocks, placeholders
* used in the gmac_tx clock. The gmac driver will
@@ -736,14 +206,14 @@
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
- mii_phy_tx_clk: clk at 2 {
+ mii_phy_tx_clk: clk at 1 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};
- gmac_int_tx_clk: clk at 3 {
+ gmac_int_tx_clk: clk at 2 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
@@ -757,34 +227,6 @@
clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
clock-output-names = "gmac_tx";
};
-
- /*
- * Dummy clock used by output clocks
- */
- osc24M_32k: clk at 1 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <750>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc24M_32k";
- };
-
- clk_out_a: clk at 01c201f0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-out-clk";
- reg = <0x01c201f0 0x4>;
- clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
- clock-output-names = "clk_out_a";
- };
-
- clk_out_b: clk at 01c201f4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-out-clk";
- reg = <0x01c201f4 0x4>;
- clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
- clock-output-names = "clk_out_b";
- };
};
soc at 01c00000 {
@@ -841,7 +283,7 @@
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 6>;
+ clocks = <&ccu CLK_AHB_DMA>;
#dma-cells = <2>;
};
@@ -849,7 +291,7 @@
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 13>, <&nand_clk>;
+ clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
dma-names = "rxtx";
@@ -862,7 +304,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
@@ -877,7 +319,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
@@ -892,7 +334,7 @@
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 17>;
+ clocks = <&ccu CLK_AHB_EMAC>;
allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
@@ -908,10 +350,10 @@
mmc0: mmc at 01c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC0>,
+ <&ccu CLK_MMC0>,
+ <&ccu CLK_MMC0_OUTPUT>,
+ <&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -925,10 +367,10 @@
mmc1: mmc at 01c10000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC1>,
+ <&ccu CLK_MMC1>,
+ <&ccu CLK_MMC1_OUTPUT>,
+ <&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -942,10 +384,10 @@
mmc2: mmc at 01c11000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC2>,
+ <&ccu CLK_MMC2>,
+ <&ccu CLK_MMC2_OUTPUT>,
+ <&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -959,10 +401,10 @@
mmc3: mmc at 01c12000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c12000 0x1000>;
- clocks = <&ahb_gates 11>,
- <&mmc3_clk 0>,
- <&mmc3_clk 1>,
- <&mmc3_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC3>,
+ <&ccu CLK_MMC3>,
+ <&ccu CLK_MMC3_OUTPUT>,
+ <&ccu CLK_MMC3_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -976,7 +418,7 @@
usb_otg: usb at 01c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
- clocks = <&ahb_gates 0>;
+ clocks = <&ccu CLK_AHB_OTG>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@@ -991,9 +433,11 @@
compatible = "allwinner,sun7i-a20-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
- clocks = <&usb_clk 8>;
+ clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
@@ -1002,7 +446,7 @@
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 1>;
+ clocks = <&ccu CLK_AHB_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -1012,7 +456,7 @@
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -1022,7 +466,7 @@
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 5>, <&ss_clk>;
+ clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
clock-names = "ahb", "mod";
};
@@ -1030,7 +474,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
@@ -1045,7 +489,7 @@
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pll6 0>, <&ahb_gates 25>;
+ clocks = <&ccu CLK_AHB_SATA>;
status = "disabled";
};
@@ -1053,7 +497,7 @@
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 3>;
+ clocks = <&ccu CLK_AHB_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -1063,7 +507,7 @@
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_clk 7>, <&ahb_gates 4>;
+ clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -1073,7 +517,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 23>, <&spi3_clk>;
+ clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 31>,
<&dma SUN4I_DMA_DEDICATED 30>;
@@ -1084,11 +528,20 @@
num-cs = <1>;
};
+ ccu: clock at 01c20000 {
+ compatible = "allwinner,sun7i-a20-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
pio: pinctrl at 01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -1365,7 +818,7 @@
compatible = "allwinner,sun4i-a10-spdif";
reg = <0x01c21000 0x400>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma SUN4I_DMA_NORMAL 2>,
<&dma SUN4I_DMA_NORMAL 2>;
@@ -1375,7 +828,7 @@
ir0: ir at 01c21800 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21800 0x40>;
@@ -1384,7 +837,7 @@
ir1: ir at 01c21c00 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21c00 0x40>;
@@ -1396,7 +849,7 @@
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22000 0x400>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 4>, <&i2s1_clk>;
+ clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 4>,
<&dma SUN4I_DMA_NORMAL 4>;
@@ -1409,7 +862,7 @@
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22400 0x400>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 3>, <&i2s0_clk>;
+ clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 3>,
<&dma SUN4I_DMA_NORMAL 3>;
@@ -1429,7 +882,7 @@
compatible = "allwinner,sun7i-a20-codec";
reg = <0x01c22c00 0x40>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>, <&codec_clk>;
+ clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
@@ -1447,7 +900,7 @@
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c24400 0x400>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 8>, <&i2s2_clk>;
+ clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 6>,
<&dma SUN4I_DMA_NORMAL 6>;
@@ -1468,7 +921,7 @@
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 16>;
+ clocks = <&ccu CLK_APB1_UART0>;
status = "disabled";
};
@@ -1478,7 +931,7 @@
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
+ clocks = <&ccu CLK_APB1_UART1>;
status = "disabled";
};
@@ -1488,7 +941,7 @@
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
+ clocks = <&ccu CLK_APB1_UART2>;
status = "disabled";
};
@@ -1498,7 +951,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
+ clocks = <&ccu CLK_APB1_UART3>;
status = "disabled";
};
@@ -1508,7 +961,7 @@
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 20>;
+ clocks = <&ccu CLK_APB1_UART4>;
status = "disabled";
};
@@ -1518,7 +971,7 @@
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 21>;
+ clocks = <&ccu CLK_APB1_UART5>;
status = "disabled";
};
@@ -1528,7 +981,7 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 22>;
+ clocks = <&ccu CLK_APB1_UART6>;
status = "disabled";
};
@@ -1538,7 +991,7 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 23>;
+ clocks = <&ccu CLK_APB1_UART7>;
status = "disabled";
};
@@ -1546,7 +999,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a000 0x400>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 6>;
+ clocks = <&ccu CLK_APB1_PS20>;
status = "disabled";
};
@@ -1554,7 +1007,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a400 0x400>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 7>;
+ clocks = <&ccu CLK_APB1_PS21>;
status = "disabled";
};
@@ -1563,7 +1016,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 0>;
+ clocks = <&ccu CLK_APB1_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1574,7 +1027,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 1>;
+ clocks = <&ccu CLK_APB1_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1585,7 +1038,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 2>;
+ clocks = <&ccu CLK_APB1_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1596,7 +1049,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 3>;
+ clocks = <&ccu CLK_APB1_I2C3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1607,7 +1060,7 @@
"allwinner,sun4i-a10-can";
reg = <0x01c2bc00 0x400>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 4>;
+ clocks = <&ccu CLK_APB1_CAN>;
status = "disabled";
};
@@ -1616,7 +1069,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2c000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 15>;
+ clocks = <&ccu CLK_APB1_I2C4>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1627,7 +1080,7 @@
reg = <0x01c50000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
- clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+ clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
snps,pbl = <2>;
snps,fixed-burst;
@@ -1644,7 +1097,7 @@
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 28>;
+ clocks = <&ccu CLK_AHB_HSTIMER>;
};
gic: interrupt-controller at 01c81000 {
@@ -1657,6 +1110,5 @@
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
-
};
};
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH v3 3/5] dt-bindings: List devicetree binding for the CCU of Allwinner A10
From: Priit Laes @ 2017-04-26 19:32 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.908ce010a25e503bb5ad0967759c723219c6ed0d.1493235134.git-series.plaes@plaes.org>
Allwinner A10 is now driven by sunxi-ng CCU driver.
Add devicetree binding for it.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Priit Laes <plaes@plaes.org>
---
Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 9ed2ec8..d8ce5f8 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -3,6 +3,7 @@ Allwinner Clock Control Unit Binding
Required properties :
- compatible: must contain one of the following compatibles:
+ - "allwinner,sun4i-a10-ccu"
- "allwinner,sun6i-a31-ccu"
- "allwinner,sun7i-a20-ccu"
- "allwinner,sun8i-a23-ccu"
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH v3 2/5] dt-bindings: List devicetree binding for the CCU of Allwinner A20
From: Priit Laes @ 2017-04-26 19:32 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.908ce010a25e503bb5ad0967759c723219c6ed0d.1493235134.git-series.plaes@plaes.org>
Allwinner A20 is now driven by sunxi-ng CCU driver.
Add devicetree binding for it.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Priit Laes <plaes@plaes.org>
---
Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index e9c5a1d..9ed2ec8 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -4,6 +4,7 @@ Allwinner Clock Control Unit Binding
Required properties :
- compatible: must contain one of the following compatibles:
- "allwinner,sun6i-a31-ccu"
+ - "allwinner,sun7i-a20-ccu"
- "allwinner,sun8i-a23-ccu"
- "allwinner,sun8i-a33-ccu"
- "allwinner,sun8i-h3-ccu"
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH v3 1/5] clk: sunxi-ng: Add sun4i/sun7i CCU driver
From: Priit Laes @ 2017-04-26 19:32 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.908ce010a25e503bb5ad0967759c723219c6ed0d.1493235134.git-series.plaes@plaes.org>
Introduce a clock controller driver for sun4i A10 and sun7i A20
series SoCs.
Signed-off-by: Priit Laes <plaes@plaes.org>
--
Changes since v2:
- Rename driver to sun4i-a10
---
drivers/clk/sunxi-ng/Kconfig | 14 +-
drivers/clk/sunxi-ng/Makefile | 1 +-
drivers/clk/sunxi-ng/ccu-sun4i-a10.c | 1443 ++++++++++++++++++++++-
drivers/clk/sunxi-ng/ccu-sun4i-a10.h | 60 +-
include/dt-bindings/clock/sun4i-a10-ccu.h | 207 +++-
include/dt-bindings/reset/sun4i-a10-ccu.h | 67 +-
6 files changed, 1792 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index fbd3f8c..1133749 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -66,6 +66,19 @@ config SUN50I_A64_CCU
default ARM64 && ARCH_SUNXI
depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+config SUNXI_A10_CCU
+ bool "Support for the Allwinner A10/A20 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_MULT
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ select SUNXI_CCU_PHASE
+ default MACH_SUN4I
+ default MACH_SUN7I
+ depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+
config SUN5I_CCU
bool "Support for the Allwinner sun5i family CCM"
select SUNXI_CCU_DIV
@@ -157,4 +170,5 @@ config SUN8I_R_CCU
select SUNXI_CCU_GATE
default MACH_SUN8I || (ARCH_SUNXI && ARM64)
+
endif
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 0ec02fe..fbfe163 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o
obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o
obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
+obj-$(CONFIG_SUNXI_A10_CCU) += ccu-sun4i-a10.o
obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.c b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
new file mode 100644
index 0000000..3371c0a
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
@@ -0,0 +1,1443 @@
+/*
+ * Copyright (c) 2017 Priit Laes <plaes@plaes.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun4i-a10.h"
+
+static struct ccu_nkmp pll_core_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .common = {
+ .reg = 0x000,
+ .hw.init = CLK_HW_INIT("pll-core",
+ "hosc",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names.
+ */
+#define SUN4I_PLL_AUDIO_REG 0x008
+static struct ccu_nm pll_audio_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 7, 0),
+ .m = _SUNXI_CCU_DIV_OFFSET(0, 5, 0),
+ .common = {
+ .reg = 0x008,
+ .hw.init = CLK_HW_INIT("pll-audio-base",
+ "hosc",
+ &ccu_nm_ops,
+ 0),
+ },
+
+};
+
+static struct ccu_mult pll_video0_clk = {
+ .enable = BIT(31),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+ .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+ 270000000, 297000000),
+ .common = {
+ .reg = 0x010,
+ .features = (CCU_FEATURE_FRACTIONAL |
+ CCU_FEATURE_ALL_PREDIV),
+ .prediv = 8,
+ .hw.init = CLK_HW_INIT("pll-video0",
+ "hosc",
+ &ccu_mult_ops,
+ 0),
+ },
+};
+
+static struct ccu_nkmp pll_ve_sun4i_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .common = {
+ .reg = 0x018,
+ .hw.init = CLK_HW_INIT("pll-ve",
+ "hosc",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_ve_sun7i_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x018,
+ .hw.init = CLK_HW_INIT("pll-ve",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_ddr_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x020,
+ .hw.init = CLK_HW_INIT("pll-ddr-base",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_M(pll_ddr_clk, "pll-ddr", "pll-ddr-base", 0x020, 0, 2,
+ CLK_IS_CRITICAL);
+
+static struct ccu_div pll_ddr_other_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(16, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .common = {
+ .reg = 0x020,
+ .hw.init = CLK_HW_INIT("pll-ddr-other", "pll-ddr-base",
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_periph_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x028,
+ .hw.init = CLK_HW_INIT("pll-periph-base",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static CLK_FIXED_FACTOR(pll_periph_clk, "pll-periph", "pll-periph-base",
+ 2, 1, CLK_SET_RATE_PARENT);
+
+/* Not documented on A10 */
+/* TODO: current implementation is missing fixed postdivider 6 */
+static struct ccu_div pll_periph_sata_clk = {
+ .enable = BIT(14),
+ .div = _SUNXI_CCU_DIV(0, 2),
+ .common = {
+ .reg = 0x028,
+ .hw.init = CLK_HW_INIT("pll-periph-sata",
+ "pll-periph-base",
+ &ccu_nk_ops, 0),
+ },
+};
+
+static struct ccu_mult pll_video1_clk = {
+ .enable = BIT(31),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+ .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+ 270000000, 297000000),
+ .common = {
+ .reg = 0x030,
+ .features = (CCU_FEATURE_FRACTIONAL |
+ CCU_FEATURE_ALL_PREDIV),
+ .prediv = 8,
+ .hw.init = CLK_HW_INIT("pll-video1",
+ "hosc",
+ &ccu_mult_ops,
+ 0),
+ },
+};
+
+/* Not present on A10 */
+static struct ccu_nk pll_gpu_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x040,
+ .hw.init = CLK_HW_INIT("pll-gpu",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(hosc_clk, "hosc", "osc24M", 0x050, BIT(0), 0);
+
+static const char *const cpu_parents[] = { "osc32k", "hosc",
+ "pll-core", "pll-periph" };
+static const struct ccu_mux_fixed_prediv cpu_predivs[] = {
+ { .index = 3, .div = 3, },
+};
+
+#define SUN4I_AHB_REG 0x054
+static struct ccu_mux cpu_clk = {
+ .mux = {
+ .shift = 16,
+ .width = 2,
+ .fixed_predivs = cpu_predivs,
+ .n_predivs = ARRAY_SIZE(cpu_predivs),
+ },
+ .common = {
+ .reg = 0x054,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("cpu",
+ cpu_parents,
+ &ccu_mux_ops,
+ CLK_IS_CRITICAL),
+ }
+};
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x054, 0, 2, 0);
+
+static struct ccu_div ahb_sun4i_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .common = {
+ .reg = 0x054,
+ .hw.init = CLK_HW_INIT("ahb", "axi", &ccu_div_ops, 0),
+ },
+};
+
+static const char *const ahb_sun7i_parents[] = { "axi", "pll-periph",
+ "pll-periph" };
+static const struct ccu_mux_fixed_prediv ahb_sun7i_predivs[] = {
+ { .index = 1, .div = 2, },
+ { /* Sentinel */ },
+};
+static struct ccu_div ahb_sun7i_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = {
+ .shift = 6,
+ .width = 2,
+ .fixed_predivs = ahb_sun7i_predivs,
+ .n_predivs = ARRAY_SIZE(ahb_sun7i_predivs),
+ },
+
+ .common = {
+ .reg = 0x054,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb",
+ ahb_sun7i_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct clk_div_table apb0_div_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 8 },
+ { /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb0_clk, "apb0", "ahb",
+ 0x054, 8, 2, apb0_div_table, 0);
+
+static const char *const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+/* Not present on A20 */
+static SUNXI_CCU_GATE(axi_dram_clk, "axi-dram", "ahb",
+ 0x05c, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ahb_otg_clk, "ahb-otg", "ahb",
+ 0x060, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_ehci0_clk, "ahb-ehci0", "ahb",
+ 0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_ohci0_clk, "ahb-ohci0", "ahb",
+ 0x060, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_ehci1_clk, "ahb-ehci1", "ahb",
+ 0x060, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_ohci1_clk, "ahb-ohci1", "ahb",
+ 0x060, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_ss_clk, "ahb-ss", "ahb",
+ 0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_dma_clk, "ahb-dma", "ahb",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(ahb_bist_clk, "ahb-bist", "ahb",
+ 0x060, BIT(7), 0);
+static SUNXI_CCU_GATE(ahb_mmc0_clk, "ahb-mmc0", "ahb",
+ 0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_mmc1_clk, "ahb-mmc1", "ahb",
+ 0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(ahb_mmc2_clk, "ahb-mmc2", "ahb",
+ 0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_mmc3_clk, "ahb-mmc3", "ahb",
+ 0x060, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_ms_clk, "ahb-ms", "ahb",
+ 0x060, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_nand_clk, "ahb-nand", "ahb",
+ 0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_sdram_clk, "ahb-sdram", "ahb",
+ 0x060, BIT(14), CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(ahb_ace_clk, "ahb-ace", "ahb",
+ 0x060, BIT(16), 0);
+static SUNXI_CCU_GATE(ahb_emac_clk, "ahb-emac", "ahb",
+ 0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_ts_clk, "ahb-ts", "ahb",
+ 0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_spi0_clk, "ahb-spi0", "ahb",
+ 0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(ahb_spi1_clk, "ahb-spi1", "ahb",
+ 0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(ahb_spi2_clk, "ahb-spi2", "ahb",
+ 0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(ahb_spi3_clk, "ahb-spi3", "ahb",
+ 0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(ahb_pata_clk, "ahb-pata", "ahb",
+ 0x060, BIT(24), 0);
+/* Not documented on A20 */
+static SUNXI_CCU_GATE(ahb_sata_clk, "ahb-sata", "ahb",
+ 0x060, BIT(25), 0);
+/* Not present on A20 */
+static SUNXI_CCU_GATE(ahb_gps_clk, "ahb-gps", "ahb",
+ 0x060, BIT(26), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_hstimer_clk, "ahb-hstimer", "ahb",
+ 0x060, BIT(28), 0);
+
+static SUNXI_CCU_GATE(ahb_ve_clk, "ahb-ve", "ahb",
+ 0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_tvd_clk, "ahb-tvd", "ahb",
+ 0x064, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_tve0_clk, "ahb-tve0", "ahb",
+ 0x064, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_tve1_clk, "ahb-tve1", "ahb",
+ 0x064, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_lcd0_clk, "ahb-lcd0", "ahb",
+ 0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_lcd1_clk, "ahb-lcd1", "ahb",
+ 0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_csi0_clk, "ahb-csi0", "ahb",
+ 0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_csi1_clk, "ahb-csi1", "ahb",
+ 0x064, BIT(9), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_hdmi1_clk, "ahb-hdmi1", "ahb",
+ 0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_hdmi0_clk, "ahb-hdmi0", "ahb",
+ 0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_de_be0_clk, "ahb-de-be0", "ahb",
+ 0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_de_be1_clk, "ahb-de-be1", "ahb",
+ 0x064, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_de_fe0_clk, "ahb-de-fe0", "ahb",
+ 0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(ahb_de_fe1_clk, "ahb-de-fe1", "ahb",
+ 0x064, BIT(15), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_gmac_clk, "ahb-gmac", "ahb",
+ 0x064, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_mp_clk, "ahb-mp", "ahb",
+ 0x064, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_gpu_clk, "ahb-gpu", "ahb",
+ 0x064, BIT(20), 0);
+
+static SUNXI_CCU_GATE(apb0_codec_clk, "apb0-codec", "apb0",
+ 0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(apb0_spdif_clk, "apb0-spdif", "apb0",
+ 0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(apb0_ac97_clk, "apb0-ac97", "apb0",
+ 0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(apb0_i2s0_clk, "apb0-i2s0", "apb0",
+ 0x068, BIT(3), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb0_i2s1_clk, "apb0-i2s1", "apb0",
+ 0x068, BIT(4), 0);
+static SUNXI_CCU_GATE(apb0_pio_clk, "apb0-pio", "apb0",
+ 0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(apb0_ir0_clk, "apb0-ir0", "apb0",
+ 0x068, BIT(6), 0);
+static SUNXI_CCU_GATE(apb0_ir1_clk, "apb0-ir1", "apb0",
+ 0x068, BIT(7), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb0_i2s2_clk, "apb0-i2s2", "apb0",
+ 0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(apb0_keypad_clk, "apb0-keypad", "apb0",
+ 0x068, BIT(10), 0);
+
+static SUNXI_CCU_GATE(apb1_i2c0_clk, "apb1-i2c0", "apb1",
+ 0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(apb1_i2c1_clk, "apb1-i2c1", "apb1",
+ 0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(apb1_i2c2_clk, "apb1-i2c2", "apb1",
+ 0x06c, BIT(2), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb1_i2c3_clk, "apb1-i2c3", "apb1",
+ 0x06c, BIT(3), 0);
+static SUNXI_CCU_GATE(apb1_can_clk, "apb1-can", "apb1",
+ 0x06c, BIT(4), 0);
+static SUNXI_CCU_GATE(apb1_scr_clk, "apb1-scr", "apb1",
+ 0x06c, BIT(5), 0);
+static SUNXI_CCU_GATE(apb1_ps20_clk, "apb1-ps20", "apb1",
+ 0x06c, BIT(6), 0);
+static SUNXI_CCU_GATE(apb1_ps21_clk, "apb1-ps21", "apb1",
+ 0x06c, BIT(7), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb1_i2c4_clk, "apb1-i2c4", "apb1",
+ 0x06c, BIT(15), 0);
+static SUNXI_CCU_GATE(apb1_uart0_clk, "apb1-uart0", "apb1",
+ 0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(apb1_uart1_clk, "apb1-uart1", "apb1",
+ 0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(apb1_uart2_clk, "apb1-uart2", "apb1",
+ 0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(apb1_uart3_clk, "apb1-uart3", "apb1",
+ 0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(apb1_uart4_clk, "apb1-uart4", "apb1",
+ 0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(apb1_uart5_clk, "apb1-uart5", "apb1",
+ 0x06c, BIT(21), 0);
+static SUNXI_CCU_GATE(apb1_uart6_clk, "apb1-uart6", "apb1",
+ 0x06c, BIT(22), 0);
+static SUNXI_CCU_GATE(apb1_uart7_clk, "apb1-uart7", "apb1",
+ 0x06c, BIT(23), 0);
+
+static const char *const mod0_default_parents[] = { "hosc", "pll-periph",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(ms_clk, "ms", mod0_default_parents, 0x084,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+ 0x088, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+ 0x088, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+ 0x08c, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+ 0x08c, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
+ 0x090, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
+ 0x090, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents, 0x094,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc3_output_clk, "mmc3_output", "mmc3",
+ 0x094, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc3_sample_clk, "mmc3_sample", "mmc3",
+ 0x094, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", mod0_default_parents, 0x098,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ss_clk, "ss", mod0_default_parents, 0x09c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(pata_clk, "pata", mod0_default_parents, 0x0ac,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* TODO: Check whether A10 actually supports osc32k as 4th parent? */
+static const char *const ir_parents_sun4i[] = { "hosc", "pll-periph",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_sun4i_clk, "ir0", ir_parents_sun4i, 0x0b0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_sun4i_clk, "ir1", ir_parents_sun4i, 0x0b4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+static const char *const ir_parents_sun7i[] = { "hosc", "pll-periph",
+ "pll-ddr-other", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_sun7i_clk, "ir0", ir_parents_sun7i, 0x0b0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_sun7i_clk, "ir1", ir_parents_sun7i, 0x0b4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char *const audio_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", audio_parents,
+ 0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(ac97_clk, "ac97", audio_parents,
+ 0x0bc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", audio_parents,
+ 0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char *const keypad_parents[] = { "hosc", "losc"};
+static const u8 keypad_table[] = { 0, 2 };
+static struct ccu_mp keypad_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(0, 5),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .mux = _SUNXI_CCU_MUX_TABLE(24, 2, keypad_table),
+ .common = {
+ .reg = 0x0c4,
+ .hw.init = CLK_HW_INIT_PARENTS("keypad",
+ keypad_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+
+/*
+ * SATA supports external clock as parent via BIT(24) and is probably an
+ * optional crystal or oscillator that can be connected to the
+ * SATA-CLKM / SATA-CLKP pins.
+ */
+static const char *const sata_parents[] = {"pll-periph-sata", "sata-ext"};
+static SUNXI_CCU_MUX_WITH_GATE(sata_clk, "sata", sata_parents,
+ 0x0c8, 24, 1, BIT(31), 0);
+
+
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "pll-periph",
+ 0x0cc, BIT(6), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "pll-periph",
+ 0x0cc, BIT(7), 0);
+static SUNXI_CCU_GATE(usb_phy_clk, "usb-phy", "pll-periph",
+ 0x0cc, BIT(8), 0);
+
+/* TODO: GPS CLK 0x0d0 */
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents, 0x0d4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* Not present on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", audio_parents,
+ 0x0d8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Not present on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", audio_parents,
+ 0x0dc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "pll-ddr",
+ 0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi0_clk, "dram-csi0", "pll-ddr",
+ 0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_csi1_clk, "dram-csi1", "pll-ddr",
+ 0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "pll-ddr",
+ 0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk, "dram-tvd", "pll-ddr",
+ 0x100, BIT(4), 0);
+static SUNXI_CCU_GATE(dram_tve0_clk, "dram-tve0", "pll-ddr",
+ 0x100, BIT(5), 0);
+static SUNXI_CCU_GATE(dram_tve1_clk, "dram-tve1", "pll-ddr",
+ 0x100, BIT(6), 0);
+
+/* Clock seems to be critical only on sun4i */
+static SUNXI_CCU_GATE(dram_out_clk, "dram-out", "pll-ddr",
+ 0x100, BIT(15), CLK_IS_CRITICAL);
+static SUNXI_CCU_GATE(dram_de_fe1_clk, "dram-de-fe1", "pll-ddr",
+ 0x100, BIT(24), 0);
+static SUNXI_CCU_GATE(dram_de_fe0_clk, "dram-de-fe0", "pll-ddr",
+ 0x100, BIT(25), 0);
+static SUNXI_CCU_GATE(dram_de_be0_clk, "dram-de-be0", "pll-ddr",
+ 0x100, BIT(26), 0);
+static SUNXI_CCU_GATE(dram_de_be1_clk, "dram-de-be1", "pll-ddr",
+ 0x100, BIT(27), 0);
+static SUNXI_CCU_GATE(dram_mp_clk, "dram-mp", "pll-ddr",
+ 0x100, BIT(28), 0);
+static SUNXI_CCU_GATE(dram_ace_clk, "dram-ace", "pll-ddr",
+ 0x100, BIT(29), 0);
+
+static const char *const de_parents[] = { "pll-video0", "pll-video1",
+ "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be0_clk, "de-be0", de_parents,
+ 0x104, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be1_clk, "de-be1", de_parents,
+ 0x108, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe0_clk, "de-fe0", de_parents,
+ 0x10c, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe1_clk, "de-fe1", de_parents,
+ 0x110, 0, 4, 24, 2, BIT(31), 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_M_WITH_MUX_GATE(de_mp_clk, "de-mp", de_parents,
+ 0x114, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const tcon_parents[] = { "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon0_ch0_clk, "tcon0-ch0-sclk", tcon_parents,
+ 0x118, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(tcon1_ch0_clk, "tcon1-ch0-sclk", tcon_parents,
+ 0x11c, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char *const csi_sclk_parents[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other", "pll-periph" };
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk",
+ csi_sclk_parents,
+ 0x120, 0, 4, 24, 2, BIT(31), 0);
+
+/* TVD clock setup for A10 */
+static const char *const tvd_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_MUX_WITH_GATE(tvd_sun4i_clk, "tvd", tvd_parents,
+ 0x128, 24, 1, BIT(31), 0);
+
+/* TVD clock setup for A20 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(tvd_sclk2_sun7i_clk,
+ "tvd-sclk2", tvd_parents,
+ 0x128,
+ 0, 4, /* M */
+ 16, 4, /* P */
+ 8, 1, /* mux */
+ BIT(15), /* gate */
+ 0);
+static SUNXI_CCU_M_WITH_GATE(tvd_sclk1_sun7i_clk, "tvd-sclk1", "tvd-sclk2",
+ 0x128, 0, 4, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon0_ch1_sclk2_clk, "tcon0-ch1-sclk2",
+ tcon_parents,
+ 0x12c, 0, 4, 24, 2, BIT(31),
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(tcon0_ch1_clk,
+ "tcon0-ch1-sclk1", "tcon0-ch1-sclk2",
+ 0x12c, 11, 1, BIT(15),
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon1_ch1_sclk2_clk, "tcon1-ch1-sclk2",
+ tcon_parents,
+ 0x130, 0, 4, 24, 2, BIT(31),
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(tcon1_ch1_clk,
+ "tcon1-ch1-sclk1", "tcon1-ch1-sclk2",
+ 0x130, 11, 1, BIT(15),
+ CLK_SET_RATE_PARENT);
+
+static const char *const csi_parents[] = { "hosc", "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x"};
+static const u8 csi_table[] = { 0, 1, 2, 5, 6};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi0_clk, "csi0",
+ csi_parents, csi_table,
+ 0x134, 0, 5, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi1_clk, "csi1",
+ csi_parents, csi_table,
+ 0x138, 0, 5, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve", 0x13c, 16, 8, BIT(31), 0);
+
+static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio",
+ 0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk, "avs", "hosc", 0x144, BIT(31), 0);
+
+static const char *const ace_parents[] = { "pll-ve", "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ace_clk, "ace", ace_parents,
+ 0x148, 0, 4, 24, 1, BIT(31), 0);
+
+static const char *const hdmi_parents[] = { "pll-video0", "pll-video0-2x",
+ "pll-video1", "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+ 0x150, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const gpu_parents_sun4i[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other",
+ "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_sun4i_clk, "gpu", gpu_parents_sun4i,
+ 0x154, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const gpu_parents_sun7i[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other", "pll-video1",
+ "pll-gpu" };
+static const u8 gpu_table_sun7i[] = { 0, 1, 2, 3, 4 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(gpu_sun7i_clk, "gpu",
+ gpu_parents_sun7i, gpu_table_sun7i,
+ 0x154, 0, 4, 24, 3, BIT(31), 0);
+
+static const char *const mbus_sun4i_parents[] = { "hosc", "pll-periph",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_sun4i_clk, "mbus", mbus_sun4i_parents,
+ 0x15c, 0, 4, 16, 2, 24, 2, BIT(31),
+ 0);
+static const char *const mbus_sun7i_parents[] = { "hosc", "pll-periph-base",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_sun7i_clk, "mbus", mbus_sun7i_parents,
+ 0x15c, 0, 4, 16, 2, 24, 2, BIT(31),
+ CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(hdmi1_slow_clk, "hdmi1-slow", "hosc", 0x178, BIT(31), 0);
+
+static const char *const hdmi1_parents[] = { "pll-video0", "pll-video1" };
+static const u8 hdmi1_table[] = { 0, 1};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(hdmi1_clk, "hdmi1",
+ hdmi1_parents, hdmi1_table,
+ 0x17c, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const out_parents[] = { "hosc", "osc32k", "hosc" };
+static const struct ccu_mux_fixed_prediv clk_out_predivs[] = {
+ { .index = 0, .div = 750, },
+};
+
+static struct ccu_mp out_a_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(8, 5),
+ .p = _SUNXI_CCU_DIV(20, 2),
+ .mux = {
+ .shift = 24,
+ .width = 2,
+ .fixed_predivs = clk_out_predivs,
+ .n_predivs = ARRAY_SIZE(clk_out_predivs),
+ },
+ .common = {
+ .reg = 0x1f0,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("out-a",
+ out_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+static struct ccu_mp out_b_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(8, 5),
+ .p = _SUNXI_CCU_DIV(20, 2),
+ .mux = {
+ .shift = 24,
+ .width = 2,
+ .fixed_predivs = clk_out_predivs,
+ .n_predivs = ARRAY_SIZE(clk_out_predivs),
+ },
+ .common = {
+ .reg = 0x1f4,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("out-b",
+ out_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+
+static struct ccu_common *sun4i_sun7i_ccu_clks[] = {
+ &hosc_clk.common,
+ &pll_core_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video0_clk.common,
+ &pll_ve_sun4i_clk.common,
+ &pll_ve_sun7i_clk.common,
+ &pll_ddr_base_clk.common,
+ &pll_ddr_clk.common,
+ &pll_ddr_other_clk.common,
+ &pll_periph_base_clk.common,
+ &pll_periph_sata_clk.common,
+ &pll_video1_clk.common,
+ &pll_gpu_clk.common,
+ &cpu_clk.common,
+ &axi_clk.common,
+ &axi_dram_clk.common,
+ &ahb_sun4i_clk.common,
+ &ahb_sun7i_clk.common,
+ &apb0_clk.common,
+ &apb1_clk.common,
+ &ahb_otg_clk.common,
+ &ahb_ehci0_clk.common,
+ &ahb_ohci0_clk.common,
+ &ahb_ehci1_clk.common,
+ &ahb_ohci1_clk.common,
+ &ahb_ss_clk.common,
+ &ahb_dma_clk.common,
+ &ahb_bist_clk.common,
+ &ahb_mmc0_clk.common,
+ &ahb_mmc1_clk.common,
+ &ahb_mmc2_clk.common,
+ &ahb_mmc3_clk.common,
+ &ahb_ms_clk.common,
+ &ahb_nand_clk.common,
+ &ahb_sdram_clk.common,
+ &ahb_ace_clk.common,
+ &ahb_emac_clk.common,
+ &ahb_ts_clk.common,
+ &ahb_spi0_clk.common,
+ &ahb_spi1_clk.common,
+ &ahb_spi2_clk.common,
+ &ahb_spi3_clk.common,
+ &ahb_pata_clk.common,
+ &ahb_sata_clk.common,
+ &ahb_gps_clk.common,
+ &ahb_hstimer_clk.common,
+ &ahb_ve_clk.common,
+ &ahb_tvd_clk.common,
+ &ahb_tve0_clk.common,
+ &ahb_tve1_clk.common,
+ &ahb_lcd0_clk.common,
+ &ahb_lcd1_clk.common,
+ &ahb_csi0_clk.common,
+ &ahb_csi1_clk.common,
+ &ahb_hdmi1_clk.common,
+ &ahb_hdmi0_clk.common,
+ &ahb_de_be0_clk.common,
+ &ahb_de_be1_clk.common,
+ &ahb_de_fe0_clk.common,
+ &ahb_de_fe1_clk.common,
+ &ahb_gmac_clk.common,
+ &ahb_mp_clk.common,
+ &ahb_gpu_clk.common,
+ &apb0_codec_clk.common,
+ &apb0_spdif_clk.common,
+ &apb0_ac97_clk.common,
+ &apb0_i2s0_clk.common,
+ &apb0_i2s1_clk.common,
+ &apb0_pio_clk.common,
+ &apb0_ir0_clk.common,
+ &apb0_ir1_clk.common,
+ &apb0_i2s2_clk.common,
+ &apb0_keypad_clk.common,
+ &apb1_i2c0_clk.common,
+ &apb1_i2c1_clk.common,
+ &apb1_i2c2_clk.common,
+ &apb1_i2c3_clk.common,
+ &apb1_can_clk.common,
+ &apb1_scr_clk.common,
+ &apb1_ps20_clk.common,
+ &apb1_ps21_clk.common,
+ &apb1_i2c4_clk.common,
+ &apb1_uart0_clk.common,
+ &apb1_uart1_clk.common,
+ &apb1_uart2_clk.common,
+ &apb1_uart3_clk.common,
+ &apb1_uart4_clk.common,
+ &apb1_uart5_clk.common,
+ &apb1_uart6_clk.common,
+ &apb1_uart7_clk.common,
+ &nand_clk.common,
+ &ms_clk.common,
+ &mmc0_clk.common,
+ &mmc0_output_clk.common,
+ &mmc0_sample_clk.common,
+ &mmc1_clk.common,
+ &mmc1_output_clk.common,
+ &mmc1_sample_clk.common,
+ &mmc2_clk.common,
+ &mmc2_output_clk.common,
+ &mmc2_sample_clk.common,
+ &mmc3_clk.common,
+ &mmc3_output_clk.common,
+ &mmc3_sample_clk.common,
+ &ts_clk.common,
+ &ss_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &spi2_clk.common,
+ &pata_clk.common,
+ &ir0_sun4i_clk.common,
+ &ir1_sun4i_clk.common,
+ &ir0_sun7i_clk.common,
+ &ir1_sun7i_clk.common,
+ &i2s0_clk.common,
+ &ac97_clk.common,
+ &spdif_clk.common,
+ &keypad_clk.common,
+ &sata_clk.common,
+ &usb_ohci0_clk.common,
+ &usb_ohci1_clk.common,
+ &usb_phy_clk.common,
+ &spi3_clk.common,
+ &i2s1_clk.common,
+ &i2s2_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi0_clk.common,
+ &dram_csi1_clk.common,
+ &dram_ts_clk.common,
+ &dram_tvd_clk.common,
+ &dram_tve0_clk.common,
+ &dram_tve1_clk.common,
+ &dram_out_clk.common,
+ &dram_de_fe1_clk.common,
+ &dram_de_fe0_clk.common,
+ &dram_de_be0_clk.common,
+ &dram_de_be1_clk.common,
+ &dram_mp_clk.common,
+ &dram_ace_clk.common,
+ &de_be0_clk.common,
+ &de_be1_clk.common,
+ &de_fe0_clk.common,
+ &de_fe1_clk.common,
+ &de_mp_clk.common,
+ &tcon0_ch0_clk.common,
+ &tcon1_ch0_clk.common,
+ &csi_sclk_clk.common,
+ &tvd_sun4i_clk.common,
+ &tvd_sclk1_sun7i_clk.common,
+ &tvd_sclk2_sun7i_clk.common,
+ &tcon0_ch1_sclk2_clk.common,
+ &tcon0_ch1_clk.common,
+ &tcon1_ch1_sclk2_clk.common,
+ &tcon1_ch1_clk.common,
+ &csi0_clk.common,
+ &csi1_clk.common,
+ &ve_clk.common,
+ &codec_clk.common,
+ &avs_clk.common,
+ &ace_clk.common,
+ &hdmi_clk.common,
+ &gpu_sun4i_clk.common,
+ &gpu_sun7i_clk.common,
+ &mbus_sun4i_clk.common,
+ &mbus_sun7i_clk.common,
+ &hdmi1_slow_clk.common,
+ &hdmi1_clk.common,
+ &out_a_clk.common,
+ &out_b_clk.common
+};
+
+/* Post-divider for pll-audio is hardcoded to 4 */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+ "pll-video0", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+ "pll-video1", 1, 2, CLK_SET_RATE_PARENT);
+
+
+static struct clk_hw_onecell_data sun4i_a10_hw_clks = {
+ .hws = {
+ [CLK_HOSC] = &hosc_clk.common.hw,
+ [CLK_PLL_CORE] = &pll_core_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_sun4i_clk.common.hw,
+ [CLK_PLL_DDR_BASE] = &pll_ddr_base_clk.common.hw,
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_DDR_OTHER] = &pll_ddr_other_clk.common.hw,
+ [CLK_PLL_PERIPH_BASE] = &pll_periph_base_clk.common.hw,
+ [CLK_PLL_PERIPH] = &pll_periph_clk.hw,
+ [CLK_PLL_PERIPH_SATA] = &pll_periph_sata_clk.common.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AXI_DRAM] = &axi_dram_clk.common.hw,
+ [CLK_AHB] = &ahb_sun4i_clk.common.hw,
+ [CLK_APB0] = &apb0_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_AHB_OTG] = &ahb_otg_clk.common.hw,
+ [CLK_AHB_EHCI0] = &ahb_ehci0_clk.common.hw,
+ [CLK_AHB_OHCI0] = &ahb_ohci0_clk.common.hw,
+ [CLK_AHB_EHCI1] = &ahb_ehci1_clk.common.hw,
+ [CLK_AHB_OHCI1] = &ahb_ohci1_clk.common.hw,
+ [CLK_AHB_SS] = &ahb_ss_clk.common.hw,
+ [CLK_AHB_DMA] = &ahb_dma_clk.common.hw,
+ [CLK_AHB_BIST] = &ahb_bist_clk.common.hw,
+ [CLK_AHB_MMC0] = &ahb_mmc0_clk.common.hw,
+ [CLK_AHB_MMC1] = &ahb_mmc1_clk.common.hw,
+ [CLK_AHB_MMC2] = &ahb_mmc2_clk.common.hw,
+ [CLK_AHB_MMC3] = &ahb_mmc3_clk.common.hw,
+ [CLK_AHB_MS] = &ahb_ms_clk.common.hw,
+ [CLK_AHB_NAND] = &ahb_nand_clk.common.hw,
+ [CLK_AHB_SDRAM] = &ahb_sdram_clk.common.hw,
+ [CLK_AHB_ACE] = &ahb_ace_clk.common.hw,
+ [CLK_AHB_EMAC] = &ahb_emac_clk.common.hw,
+ [CLK_AHB_TS] = &ahb_ts_clk.common.hw,
+ [CLK_AHB_SPI0] = &ahb_spi0_clk.common.hw,
+ [CLK_AHB_SPI1] = &ahb_spi1_clk.common.hw,
+ [CLK_AHB_SPI2] = &ahb_spi2_clk.common.hw,
+ [CLK_AHB_SPI3] = &ahb_spi3_clk.common.hw,
+ [CLK_AHB_PATA] = &ahb_pata_clk.common.hw,
+ [CLK_AHB_SATA] = &ahb_sata_clk.common.hw,
+ [CLK_AHB_GPS] = &ahb_gps_clk.common.hw,
+ [CLK_AHB_VE] = &ahb_ve_clk.common.hw,
+ [CLK_AHB_TVD] = &ahb_tvd_clk.common.hw,
+ [CLK_AHB_TVE0] = &ahb_tve0_clk.common.hw,
+ [CLK_AHB_TVE1] = &ahb_tve1_clk.common.hw,
+ [CLK_AHB_LCD0] = &ahb_lcd0_clk.common.hw,
+ [CLK_AHB_LCD1] = &ahb_lcd1_clk.common.hw,
+ [CLK_AHB_CSI0] = &ahb_csi0_clk.common.hw,
+ [CLK_AHB_CSI1] = &ahb_csi1_clk.common.hw,
+ [CLK_AHB_HDMI0] = &ahb_hdmi0_clk.common.hw,
+ [CLK_AHB_DE_BE0] = &ahb_de_be0_clk.common.hw,
+ [CLK_AHB_DE_BE1] = &ahb_de_be1_clk.common.hw,
+ [CLK_AHB_DE_FE0] = &ahb_de_fe0_clk.common.hw,
+ [CLK_AHB_DE_FE1] = &ahb_de_fe1_clk.common.hw,
+ [CLK_AHB_MP] = &ahb_mp_clk.common.hw,
+ [CLK_AHB_GPU] = &ahb_gpu_clk.common.hw,
+ [CLK_APB0_CODEC] = &apb0_codec_clk.common.hw,
+ [CLK_APB0_SPDIF] = &apb0_spdif_clk.common.hw,
+ [CLK_APB0_AC97] = &apb0_ac97_clk.common.hw,
+ [CLK_APB0_I2S0] = &apb0_i2s0_clk.common.hw,
+ [CLK_APB0_PIO] = &apb0_pio_clk.common.hw,
+ [CLK_APB0_IR0] = &apb0_ir0_clk.common.hw,
+ [CLK_APB0_IR1] = &apb0_ir1_clk.common.hw,
+ [CLK_APB0_KEYPAD] = &apb0_keypad_clk.common.hw,
+ [CLK_APB1_I2C0] = &apb1_i2c0_clk.common.hw,
+ [CLK_APB1_I2C1] = &apb1_i2c1_clk.common.hw,
+ [CLK_APB1_I2C2] = &apb1_i2c2_clk.common.hw,
+ [CLK_APB1_CAN] = &apb1_can_clk.common.hw,
+ [CLK_APB1_SCR] = &apb1_scr_clk.common.hw,
+ [CLK_APB1_PS20] = &apb1_ps20_clk.common.hw,
+ [CLK_APB1_PS21] = &apb1_ps21_clk.common.hw,
+ [CLK_APB1_UART0] = &apb1_uart0_clk.common.hw,
+ [CLK_APB1_UART1] = &apb1_uart1_clk.common.hw,
+ [CLK_APB1_UART2] = &apb1_uart2_clk.common.hw,
+ [CLK_APB1_UART3] = &apb1_uart3_clk.common.hw,
+ [CLK_APB1_UART4] = &apb1_uart4_clk.common.hw,
+ [CLK_APB1_UART5] = &apb1_uart5_clk.common.hw,
+ [CLK_APB1_UART6] = &apb1_uart6_clk.common.hw,
+ [CLK_APB1_UART7] = &apb1_uart7_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MS] = &ms_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_MMC3] = &mmc3_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_SS] = &ss_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_PATA] = &pata_clk.common.hw,
+ [CLK_IR0] = &ir0_sun4i_clk.common.hw,
+ [CLK_IR1] = &ir1_sun4i_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_AC97] = &ac97_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_KEYPAD] = &keypad_clk.common.hw,
+ [CLK_SATA] = &sata_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_USB_PHY] = &usb_phy_clk.common.hw,
+ [CLK_SPI3] = &spi3_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI0] = &dram_csi0_clk.common.hw,
+ [CLK_DRAM_CSI1] = &dram_csi1_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DRAM_TVD] = &dram_tvd_clk.common.hw,
+ [CLK_DRAM_TVE0] = &dram_tve0_clk.common.hw,
+ [CLK_DRAM_TVE1] = &dram_tve1_clk.common.hw,
+ [CLK_DRAM_OUT] = &dram_out_clk.common.hw,
+ [CLK_DRAM_DE_FE1] = &dram_de_fe1_clk.common.hw,
+ [CLK_DRAM_DE_FE0] = &dram_de_fe0_clk.common.hw,
+ [CLK_DRAM_DE_BE0] = &dram_de_be0_clk.common.hw,
+ [CLK_DRAM_DE_BE1] = &dram_de_be1_clk.common.hw,
+ [CLK_DRAM_MP] = &dram_mp_clk.common.hw,
+ [CLK_DRAM_ACE] = &dram_ace_clk.common.hw,
+ [CLK_DE_BE0] = &de_be0_clk.common.hw,
+ [CLK_DE_BE1] = &de_be1_clk.common.hw,
+ [CLK_DE_FE0] = &de_fe0_clk.common.hw,
+ [CLK_DE_FE1] = &de_fe1_clk.common.hw,
+ [CLK_DE_MP] = &de_mp_clk.common.hw,
+ [CLK_TCON0_CH0] = &tcon0_ch0_clk.common.hw,
+ [CLK_TCON1_CH0] = &tcon1_ch0_clk.common.hw,
+ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
+ [CLK_TVD] = &tvd_sun4i_clk.common.hw,
+ [CLK_TCON0_CH1_SCLK2] = &tcon0_ch1_sclk2_clk.common.hw,
+ [CLK_TCON0_CH1] = &tcon0_ch1_clk.common.hw,
+ [CLK_TCON1_CH1_SCLK2] = &tcon1_ch1_sclk2_clk.common.hw,
+ [CLK_TCON1_CH1] = &tcon1_ch1_clk.common.hw,
+ [CLK_CSI0] = &csi0_clk.common.hw,
+ [CLK_CSI1] = &csi1_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_CODEC] = &codec_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_ACE] = &ace_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_GPU] = &gpu_sun7i_clk.common.hw,
+ [CLK_MBUS] = &mbus_sun4i_clk.common.hw,
+ },
+ .num = CLK_NUMBER_SUN4I,
+};
+static struct clk_hw_onecell_data sun7i_a20_hw_clks = {
+ .hws = {
+ [CLK_HOSC] = &hosc_clk.common.hw,
+ [CLK_PLL_CORE] = &pll_core_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_sun7i_clk.common.hw,
+ [CLK_PLL_DDR_BASE] = &pll_ddr_base_clk.common.hw,
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_DDR_OTHER] = &pll_ddr_other_clk.common.hw,
+ [CLK_PLL_PERIPH_BASE] = &pll_periph_base_clk.common.hw,
+ [CLK_PLL_PERIPH] = &pll_periph_clk.hw,
+ [CLK_PLL_PERIPH_SATA] = &pll_periph_sata_clk.common.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
+ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB] = &ahb_sun7i_clk.common.hw,
+ [CLK_APB0] = &apb0_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_AHB_OTG] = &ahb_otg_clk.common.hw,
+ [CLK_AHB_EHCI0] = &ahb_ehci0_clk.common.hw,
+ [CLK_AHB_OHCI0] = &ahb_ohci0_clk.common.hw,
+ [CLK_AHB_EHCI1] = &ahb_ehci1_clk.common.hw,
+ [CLK_AHB_OHCI1] = &ahb_ohci1_clk.common.hw,
+ [CLK_AHB_SS] = &ahb_ss_clk.common.hw,
+ [CLK_AHB_DMA] = &ahb_dma_clk.common.hw,
+ [CLK_AHB_BIST] = &ahb_bist_clk.common.hw,
+ [CLK_AHB_MMC0] = &ahb_mmc0_clk.common.hw,
+ [CLK_AHB_MMC1] = &ahb_mmc1_clk.common.hw,
+ [CLK_AHB_MMC2] = &ahb_mmc2_clk.common.hw,
+ [CLK_AHB_MMC3] = &ahb_mmc3_clk.common.hw,
+ [CLK_AHB_MS] = &ahb_ms_clk.common.hw,
+ [CLK_AHB_NAND] = &ahb_nand_clk.common.hw,
+ [CLK_AHB_SDRAM] = &ahb_sdram_clk.common.hw,
+ [CLK_AHB_ACE] = &ahb_ace_clk.common.hw,
+ [CLK_AHB_EMAC] = &ahb_emac_clk.common.hw,
+ [CLK_AHB_TS] = &ahb_ts_clk.common.hw,
+ [CLK_AHB_SPI0] = &ahb_spi0_clk.common.hw,
+ [CLK_AHB_SPI1] = &ahb_spi1_clk.common.hw,
+ [CLK_AHB_SPI2] = &ahb_spi2_clk.common.hw,
+ [CLK_AHB_SPI3] = &ahb_spi3_clk.common.hw,
+ [CLK_AHB_PATA] = &ahb_pata_clk.common.hw,
+ [CLK_AHB_SATA] = &ahb_sata_clk.common.hw,
+ [CLK_AHB_HSTIMER] = &ahb_hstimer_clk.common.hw,
+ [CLK_AHB_VE] = &ahb_ve_clk.common.hw,
+ [CLK_AHB_TVD] = &ahb_tvd_clk.common.hw,
+ [CLK_AHB_TVE0] = &ahb_tve0_clk.common.hw,
+ [CLK_AHB_TVE1] = &ahb_tve1_clk.common.hw,
+ [CLK_AHB_LCD0] = &ahb_lcd0_clk.common.hw,
+ [CLK_AHB_LCD1] = &ahb_lcd1_clk.common.hw,
+ [CLK_AHB_CSI0] = &ahb_csi0_clk.common.hw,
+ [CLK_AHB_CSI1] = &ahb_csi1_clk.common.hw,
+ [CLK_AHB_HDMI1] = &ahb_hdmi1_clk.common.hw,
+ [CLK_AHB_HDMI0] = &ahb_hdmi0_clk.common.hw,
+ [CLK_AHB_DE_BE0] = &ahb_de_be0_clk.common.hw,
+ [CLK_AHB_DE_BE1] = &ahb_de_be1_clk.common.hw,
+ [CLK_AHB_DE_FE0] = &ahb_de_fe0_clk.common.hw,
+ [CLK_AHB_DE_FE1] = &ahb_de_fe1_clk.common.hw,
+ [CLK_AHB_GMAC] = &ahb_gmac_clk.common.hw,
+ [CLK_AHB_MP] = &ahb_mp_clk.common.hw,
+ [CLK_AHB_GPU] = &ahb_gpu_clk.common.hw,
+ [CLK_APB0_CODEC] = &apb0_codec_clk.common.hw,
+ [CLK_APB0_SPDIF] = &apb0_spdif_clk.common.hw,
+ [CLK_APB0_AC97] = &apb0_ac97_clk.common.hw,
+ [CLK_APB0_I2S0] = &apb0_i2s0_clk.common.hw,
+ [CLK_APB0_I2S1] = &apb0_i2s1_clk.common.hw,
+ [CLK_APB0_PIO] = &apb0_pio_clk.common.hw,
+ [CLK_APB0_IR0] = &apb0_ir0_clk.common.hw,
+ [CLK_APB0_IR1] = &apb0_ir1_clk.common.hw,
+ [CLK_APB0_I2S2] = &apb0_i2s2_clk.common.hw,
+ [CLK_APB0_KEYPAD] = &apb0_keypad_clk.common.hw,
+ [CLK_APB1_I2C0] = &apb1_i2c0_clk.common.hw,
+ [CLK_APB1_I2C1] = &apb1_i2c1_clk.common.hw,
+ [CLK_APB1_I2C2] = &apb1_i2c2_clk.common.hw,
+ [CLK_APB1_I2C3] = &apb1_i2c3_clk.common.hw,
+ [CLK_APB1_CAN] = &apb1_can_clk.common.hw,
+ [CLK_APB1_SCR] = &apb1_scr_clk.common.hw,
+ [CLK_APB1_PS20] = &apb1_ps20_clk.common.hw,
+ [CLK_APB1_PS21] = &apb1_ps21_clk.common.hw,
+ [CLK_APB1_I2C4] = &apb1_i2c4_clk.common.hw,
+ [CLK_APB1_UART0] = &apb1_uart0_clk.common.hw,
+ [CLK_APB1_UART1] = &apb1_uart1_clk.common.hw,
+ [CLK_APB1_UART2] = &apb1_uart2_clk.common.hw,
+ [CLK_APB1_UART3] = &apb1_uart3_clk.common.hw,
+ [CLK_APB1_UART4] = &apb1_uart4_clk.common.hw,
+ [CLK_APB1_UART5] = &apb1_uart5_clk.common.hw,
+ [CLK_APB1_UART6] = &apb1_uart6_clk.common.hw,
+ [CLK_APB1_UART7] = &apb1_uart7_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MS] = &ms_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
+ [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
+ [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_MMC2_OUTPUT] = &mmc2_output_clk.common.hw,
+ [CLK_MMC2_SAMPLE] = &mmc2_sample_clk.common.hw,
+ [CLK_MMC3] = &mmc3_clk.common.hw,
+ [CLK_MMC3_OUTPUT] = &mmc3_output_clk.common.hw,
+ [CLK_MMC3_SAMPLE] = &mmc3_sample_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_SS] = &ss_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_PATA] = &pata_clk.common.hw,
+ [CLK_IR0] = &ir0_sun7i_clk.common.hw,
+ [CLK_IR1] = &ir1_sun7i_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_AC97] = &ac97_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_KEYPAD] = &keypad_clk.common.hw,
+ [CLK_SATA] = &sata_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_USB_PHY] = &usb_phy_clk.common.hw,
+ [CLK_SPI3] = &spi3_clk.common.hw,
+ [CLK_I2S1] = &i2s1_clk.common.hw,
+ [CLK_I2S2] = &i2s2_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI0] = &dram_csi0_clk.common.hw,
+ [CLK_DRAM_CSI1] = &dram_csi1_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DRAM_TVD] = &dram_tvd_clk.common.hw,
+ [CLK_DRAM_TVE0] = &dram_tve0_clk.common.hw,
+ [CLK_DRAM_TVE1] = &dram_tve1_clk.common.hw,
+ [CLK_DRAM_OUT] = &dram_out_clk.common.hw,
+ [CLK_DRAM_DE_FE1] = &dram_de_fe1_clk.common.hw,
+ [CLK_DRAM_DE_FE0] = &dram_de_fe0_clk.common.hw,
+ [CLK_DRAM_DE_BE0] = &dram_de_be0_clk.common.hw,
+ [CLK_DRAM_DE_BE1] = &dram_de_be1_clk.common.hw,
+ [CLK_DRAM_MP] = &dram_mp_clk.common.hw,
+ [CLK_DRAM_ACE] = &dram_ace_clk.common.hw,
+ [CLK_DE_BE0] = &de_be0_clk.common.hw,
+ [CLK_DE_BE1] = &de_be1_clk.common.hw,
+ [CLK_DE_FE0] = &de_fe0_clk.common.hw,
+ [CLK_DE_FE1] = &de_fe1_clk.common.hw,
+ [CLK_DE_MP] = &de_mp_clk.common.hw,
+ [CLK_TCON0_CH0] = &tcon0_ch0_clk.common.hw,
+ [CLK_TCON1_CH0] = &tcon1_ch0_clk.common.hw,
+ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
+ [CLK_TVD_SCLK2] = &tvd_sclk2_sun7i_clk.common.hw,
+ [CLK_TVD] = &tvd_sclk1_sun7i_clk.common.hw,
+ [CLK_TCON0_CH1_SCLK2] = &tcon0_ch1_sclk2_clk.common.hw,
+ [CLK_TCON0_CH1] = &tcon0_ch1_clk.common.hw,
+ [CLK_TCON1_CH1_SCLK2] = &tcon1_ch1_sclk2_clk.common.hw,
+ [CLK_TCON1_CH1] = &tcon1_ch1_clk.common.hw,
+ [CLK_CSI0] = &csi0_clk.common.hw,
+ [CLK_CSI1] = &csi1_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_CODEC] = &codec_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_ACE] = &ace_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_GPU] = &gpu_sun7i_clk.common.hw,
+ [CLK_MBUS] = &mbus_sun7i_clk.common.hw,
+ [CLK_HDMI1_SLOW] = &hdmi1_slow_clk.common.hw,
+ [CLK_HDMI1] = &hdmi1_clk.common.hw,
+ [CLK_OUT_A] = &out_a_clk.common.hw,
+ [CLK_OUT_B] = &out_b_clk.common.hw,
+ },
+ .num = CLK_NUMBER_SUN7I,
+};
+
+static struct ccu_reset_map sun7i_a20_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_PHY2] = { 0x0cc, BIT(2) },
+ [RST_GPS] = { 0x0d0, BIT(0) },
+ [RST_DE_BE0] = { 0x104, BIT(30) },
+ [RST_DE_BE1] = { 0x108, BIT(30) },
+ [RST_DE_FE0] = { 0x10c, BIT(30) },
+ [RST_DE_FE1] = { 0x110, BIT(30) },
+ [RST_DE_MP] = { 0x114, BIT(30) },
+ [RST_TCON0] = { 0x118, BIT(30) },
+ [RST_TCON1] = { 0x11c, BIT(30) },
+ [RST_CSI0] = { 0x134, BIT(30) },
+ [RST_CSI1] = { 0x138, BIT(30) },
+ [RST_VE] = { 0x13c, BIT(0) },
+ [RST_ACE] = { 0x148, BIT(16) },
+ [RST_LVDS] = { 0x14c, BIT(0) },
+ [RST_GPU] = { 0x154, BIT(30) },
+ [RST_HDMI_H] = { 0x170, BIT(0) },
+ [RST_HDMI_SYS] = { 0x170, BIT(1) },
+ [RST_HDMI_AUDIO_DMA] = { 0x170, BIT(2) },
+};
+
+static const struct sunxi_ccu_desc sun4i_a10_ccu_desc = {
+ .ccu_clks = sun4i_sun7i_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun4i_sun7i_ccu_clks),
+
+ .hw_clks = &sun4i_a10_hw_clks,
+
+ .resets = sun7i_a20_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun7i_a20_ccu_resets),
+};
+
+static const struct sunxi_ccu_desc sun7i_a20_ccu_desc = {
+ .ccu_clks = sun4i_sun7i_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun4i_sun7i_ccu_clks),
+
+ .hw_clks = &sun7i_a20_hw_clks,
+
+ .resets = sun7i_a20_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun7i_a20_ccu_resets),
+};
+
+static void __init sun4i_ccu_init(struct device_node *node,
+ const struct sunxi_ccu_desc *desc)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%s: Could not map the clock registers\n",
+ of_node_full_name(node));
+ return;
+ }
+
+ /* Force the PLL-Audio-1x divider to 4 */
+ val = readl(reg + SUN4I_PLL_AUDIO_REG);
+ val &= ~GENMASK(19, 16);
+ writel(val | (3 << 16), reg + SUN4I_PLL_AUDIO_REG);
+
+ /*
+ * Use the peripheral PLL6 as the AHB parent, instead of CPU /
+ * AXI which have rate changes due to cpufreq.
+ *
+ * This is especially a big deal for the HS timer whose parent
+ * clock is AHB.
+ */
+ val = readl(reg + SUN4I_AHB_REG);
+ val &= ~GENMASK(7, 6);
+ writel(val | (2 << 6), reg + SUN4I_AHB_REG);
+
+ sunxi_ccu_probe(node, reg, desc);
+}
+
+static void __init sun4i_a10_ccu_setup(struct device_node *node)
+{
+ sun4i_ccu_init(node, &sun4i_a10_ccu_desc);
+}
+CLK_OF_DECLARE(sun4i_a10_ccu, "allwinner,sun4i-a10-ccu",
+ sun4i_a10_ccu_setup);
+
+static void __init sun7i_a20_ccu_setup(struct device_node *node)
+{
+ sun4i_ccu_init(node, &sun7i_a20_ccu_desc);
+}
+CLK_OF_DECLARE(sun7i_a20_ccu, "allwinner,sun7i-a20-ccu",
+ sun7i_a20_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.h b/drivers/clk/sunxi-ng/ccu-sun4i-a10.h
new file mode 100644
index 0000000..883b730
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2017 Priit Laes
+ *
+ * Priit Laes <plaes@plaes.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN4I_A10_H_
+#define _CCU_SUN4I_A10_H_
+
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+/* The HOSC is exported */
+#define CLK_PLL_CORE 2
+#define CLK_PLL_AUDIO_BASE 3
+#define CLK_PLL_AUDIO 4
+#define CLK_PLL_AUDIO_2X 5
+#define CLK_PLL_AUDIO_4X 6
+#define CLK_PLL_AUDIO_8X 7
+#define CLK_PLL_VIDEO0 8
+#define CLK_PLL_VIDEO0_2X 9
+#define CLK_PLL_VE 10
+#define CLK_PLL_DDR_BASE 11
+#define CLK_PLL_DDR 12
+#define CLK_PLL_DDR_OTHER 13
+#define CLK_PLL_PERIPH_BASE 14
+#define CLK_PLL_PERIPH 15
+#define CLK_PLL_PERIPH_SATA 16
+#define CLK_PLL_VIDEO1 17
+#define CLK_PLL_VIDEO1_2X 18
+#define CLK_PLL_GPU 19
+
+/* The CPU clock is exported */
+#define CLK_AXI 21
+#define CLK_AXI_DRAM 22
+#define CLK_AHB 23
+#define CLK_APB0 24
+#define CLK_APB1 25
+
+/* AHB gates are exported (23..68) */
+/* APB0 gates are exported (69..78) */
+/* APB1 gates are exported (79..95) */
+/* IP module clocks are exported (96..128) */
+/* DRAM gates are exported (129..142)*/
+/* Media (display engine clocks & etc) are exported (143..169) */
+
+#define CLK_NUMBER_SUN4I (CLK_MBUS + 1)
+#define CLK_NUMBER_SUN7I (CLK_OUT_B + 1)
+
+#endif /* _CCU_SUN4I_A10_H_ */
diff --git a/include/dt-bindings/clock/sun4i-a10-ccu.h b/include/dt-bindings/clock/sun4i-a10-ccu.h
new file mode 100644
index 0000000..28e6abe
--- /dev/null
+++ b/include/dt-bindings/clock/sun4i-a10-ccu.h
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2017 Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUNXI_A10_H_
+#define _DT_BINDINGS_CLK_SUNXI_A10_H_
+
+#define CLK_HOSC 1
+#define CLK_CPU 20
+
+/* AHB Gates */
+#define CLK_AHB_OTG 26
+#define CLK_AHB_EHCI0 27
+#define CLK_AHB_OHCI0 28
+#define CLK_AHB_EHCI1 29
+#define CLK_AHB_OHCI1 30
+#define CLK_AHB_SS 31
+#define CLK_AHB_DMA 32
+#define CLK_AHB_BIST 33
+#define CLK_AHB_MMC0 34
+#define CLK_AHB_MMC1 35
+#define CLK_AHB_MMC2 36
+#define CLK_AHB_MMC3 37
+#define CLK_AHB_MS 38
+#define CLK_AHB_NAND 39
+#define CLK_AHB_SDRAM 40
+#define CLK_AHB_ACE 41
+#define CLK_AHB_EMAC 42
+#define CLK_AHB_TS 43
+#define CLK_AHB_SPI0 44
+#define CLK_AHB_SPI1 45
+#define CLK_AHB_SPI2 46
+#define CLK_AHB_SPI3 47
+#define CLK_AHB_PATA 48
+#define CLK_AHB_SATA 49
+#define CLK_AHB_GPS 50
+#define CLK_AHB_HSTIMER 51
+#define CLK_AHB_VE 52
+#define CLK_AHB_TVD 53
+#define CLK_AHB_TVE0 54
+#define CLK_AHB_TVE1 55
+#define CLK_AHB_LCD0 56
+#define CLK_AHB_LCD1 57
+#define CLK_AHB_CSI0 58
+#define CLK_AHB_CSI1 59
+#define CLK_AHB_HDMI0 60
+#define CLK_AHB_HDMI1 61
+#define CLK_AHB_DE_BE0 62
+#define CLK_AHB_DE_BE1 63
+#define CLK_AHB_DE_FE0 64
+#define CLK_AHB_DE_FE1 65
+#define CLK_AHB_GMAC 66
+#define CLK_AHB_MP 67
+#define CLK_AHB_GPU 68
+
+/* APB0 Gates */
+#define CLK_APB0_CODEC 69
+#define CLK_APB0_SPDIF 70
+#define CLK_APB0_I2S0 71
+#define CLK_APB0_AC97 72
+#define CLK_APB0_I2S1 73
+#define CLK_APB0_PIO 74
+#define CLK_APB0_IR0 75
+#define CLK_APB0_IR1 76
+#define CLK_APB0_I2S2 77
+#define CLK_APB0_KEYPAD 78
+
+/* APB1 Gates */
+#define CLK_APB1_I2C0 79
+#define CLK_APB1_I2C1 80
+#define CLK_APB1_I2C2 81
+#define CLK_APB1_I2C3 82
+#define CLK_APB1_CAN 83
+#define CLK_APB1_SCR 84
+#define CLK_APB1_PS20 85
+#define CLK_APB1_PS21 86
+#define CLK_APB1_I2C4 87
+#define CLK_APB1_UART0 88
+#define CLK_APB1_UART1 89
+#define CLK_APB1_UART2 90
+#define CLK_APB1_UART3 91
+#define CLK_APB1_UART4 92
+#define CLK_APB1_UART5 93
+#define CLK_APB1_UART6 94
+#define CLK_APB1_UART7 95
+
+/* IP clocks */
+#define CLK_NAND 96
+#define CLK_MS 97
+#define CLK_MMC0 98
+#define CLK_MMC0_OUTPUT 99
+#define CLK_MMC0_SAMPLE 100
+#define CLK_MMC1 101
+#define CLK_MMC1_OUTPUT 102
+#define CLK_MMC1_SAMPLE 103
+#define CLK_MMC2 104
+#define CLK_MMC2_OUTPUT 105
+#define CLK_MMC2_SAMPLE 106
+#define CLK_MMC3 107
+#define CLK_MMC3_OUTPUT 108
+#define CLK_MMC3_SAMPLE 109
+#define CLK_TS 110
+#define CLK_SS 111
+#define CLK_SPI0 112
+#define CLK_SPI1 113
+#define CLK_SPI2 114
+#define CLK_PATA 115
+#define CLK_IR0 116
+#define CLK_IR1 117
+#define CLK_I2S0 118
+#define CLK_AC97 119
+#define CLK_SPDIF 120
+#define CLK_KEYPAD 121
+#define CLK_SATA 122
+#define CLK_USB_OHCI0 123
+#define CLK_USB_OHCI1 124
+#define CLK_USB_PHY 125
+#define CLK_SPI3 126
+#define CLK_I2S1 127
+#define CLK_I2S2 128
+
+/* DRAM Gates */
+#define CLK_DRAM_VE 129
+#define CLK_DRAM_CSI0 130
+#define CLK_DRAM_CSI1 131
+#define CLK_DRAM_TS 132
+#define CLK_DRAM_TVD 133
+#define CLK_DRAM_TVE0 134
+#define CLK_DRAM_TVE1 135
+#define CLK_DRAM_OUT 136
+#define CLK_DRAM_DE_FE1 137
+#define CLK_DRAM_DE_FE0 138
+#define CLK_DRAM_DE_BE0 139
+#define CLK_DRAM_DE_BE1 140
+#define CLK_DRAM_MP 141
+#define CLK_DRAM_ACE 142
+
+/* Display Engine Clocks */
+#define CLK_DE_BE0 143
+#define CLK_DE_BE1 144
+#define CLK_DE_FE0 145
+#define CLK_DE_FE1 146
+#define CLK_DE_MP 147
+#define CLK_TCON0_CH0 148
+#define CLK_TCON1_CH0 149
+#define CLK_CSI_SCLK 150
+#define CLK_TVD_SCLK2 151
+#define CLK_TVD 152
+#define CLK_TCON0_CH1_SCLK2 153
+#define CLK_TCON0_CH1 154
+#define CLK_TCON1_CH1_SCLK2 155
+#define CLK_TCON1_CH1 156
+#define CLK_CSI0 157
+#define CLK_CSI1 158
+#define CLK_CODEC 159
+#define CLK_VE 160
+#define CLK_AVS 161
+#define CLK_ACE 162
+#define CLK_HDMI 163
+#define CLK_GPU 164
+
+/* Following only exist on sun7i-a20 */
+#define CLK_MBUS 165
+#define CLK_HDMI1_SLOW 166
+#define CLK_HDMI1 167
+#define CLK_OUT_A 168
+#define CLK_OUT_B 169
+
+#endif /* _DT_BINDINGS_CLK_SUNXI_A10_H_ */
diff --git a/include/dt-bindings/reset/sun4i-a10-ccu.h b/include/dt-bindings/reset/sun4i-a10-ccu.h
new file mode 100644
index 0000000..e6f6b6e
--- /dev/null
+++ b/include/dt-bindings/reset/sun4i-a10-ccu.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2017 Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN4I_A10_H
+#define _DT_BINDINGS_RST_SUN4I_A10_H
+
+#define RST_USB_PHY0 1
+#define RST_USB_PHY1 2
+#define RST_USB_PHY2 3
+#define RST_GPS 4
+#define RST_DE_BE0 5
+#define RST_DE_BE1 6
+#define RST_DE_FE0 7
+#define RST_DE_FE1 8
+#define RST_DE_MP 9
+#define RST_TCON0 10
+#define RST_TCON1 11
+#define RST_CSI0 12
+#define RST_CSI1 13
+#define RST_VE 14
+#define RST_ACE 15
+#define RST_LVDS 16
+#define RST_GPU 17
+#define RST_HDMI_H 18
+#define RST_HDMI_SYS 19
+#define RST_HDMI_AUDIO_DMA 20
+
+#endif /* DT_BINDINGS_RST_SUN4I_A10_H */
--
git-series 0.9.1
^ permalink raw reply related
* [PATCH v3 0/5] ARM: sunxi: Convert sun4i/sun7i series SoCs to sunxi-ng CCU
From: Priit Laes @ 2017-04-26 19:32 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
This serie brings A10 (sun4i) and A20 (sun7i) SoCs into the
sunxi-ng world.
As mentioned in sun5i conversion, this is pretty much standard
stuff as all the required clocks were already implemented in
the sunxi-ng framework.
TODO: Unfortunately there's still an issue with SATA clocks
which will fail unless u-boot has set up the clocks. Clocks
probably need some extra work to handle fixed postdivider
and multiple parents.
Changes from v2:
- Rename driver and relevant files to sun4i-a10-ccu.
- Drop mmc output and sample clocks for sun4i-a10.
- Rename CSI ISP clock to SCLK as it is called on other variants.
- Add comment on why PLL6 is used as AHB parent.
- Fix parents for out_a/out_b clocks.
- Stop exporting PLL_PERIPH_SATA gate. Driver takes care of gate.
- Rework SATA clock handling.
- Fix ahb gate parents.
- Simplefb clock fixes (add dependencies for HDMI/LVDS clocks).
- Fixes for pll-ve and pll-video1 clocks pointed out by Jonathan Liu.
- Adapt to latest upstream changes from sunxi-next.
Changes from v1:
- Drop useless comments
- Add support for A10 / sun4i.
- Rename driver to sunxi-a10-a20.
- Add previously unimplemented clocks.
- Document the audio pll hardcoded post-divider
- Add Acked-by: Rob Herring <robh@kernel.org> on patch 4
Priit Laes (5):
clk: sunxi-ng: Add sun4i/sun7i CCU driver
dt-bindings: List devicetree binding for the CCU of Allwinner A20
dt-bindings: List devicetree binding for the CCU of Allwinner A10
ARM: sun7i: Convert to CCU
ARM: sun4i: Convert to CCU
Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 2 +-
arch/arm/boot/dts/sun4i-a10.dtsi | 645 +----
arch/arm/boot/dts/sun7i-a20.dtsi | 720 +-----
drivers/clk/sunxi-ng/Kconfig | 14 +-
drivers/clk/sunxi-ng/Makefile | 1 +-
drivers/clk/sunxi-ng/ccu-sun4i-a10.c | 1443 ++++++++++-
drivers/clk/sunxi-ng/ccu-sun4i-a10.h | 60 +-
include/dt-bindings/clock/sun4i-a10-ccu.h | 207 +-
include/dt-bindings/reset/sun4i-a10-ccu.h | 67 +-
9 files changed, 1954 insertions(+), 1205 deletions(-)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h
base-commit: 4c5e651abcb0fe1c7dd61d4ceb0388cc4a80485f
--
git-series 0.9.1
^ permalink raw reply
* [PATCH 0/5] ARM: sunxi: Convert sun4i/sun7i series SoCs to sunxi-ng CCU
From: Priit Laes @ 2017-04-26 19:31 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
This serie brings A10 (sun4i) and A20 (sun7i) SoCs into the
sunxi-ng world.
As mentioned in sun5i conversion, this is pretty much standard
stuff as all the required clocks were already implemented in
the sunxi-ng framework.
TODO: Unfortunately there's still an issue with SATA clocks
which will fail unless u-boot has set up the clocks. Clocks
probably need some extra work to handle fixed postdivider
and multiple parents.
Changes from v2:
- Rename driver and relevant files to sun4i-a10-ccu.
- Drop mmc output and sample clocks for sun4i-a10.
- Rename CSI ISP clock to SCLK as it is called on other variants.
- Add comment on why PLL6 is used as AHB parent.
- Fix parents for out_a/out_b clocks.
- Stop exporting PLL_PERIPH_SATA gate. Driver takes care of gate.
- Rework SATA clock handling.
- Fix ahb gate parents.
- Simplefb clock fixes (add dependencies for HDMI/LVDS clocks).
- Fixes for pll-ve and pll-video1 clocks pointed out by Jonathan Liu.
- Adapt to latest upstream changes from sunxi-next.
Changes from v1:
- Drop useless comments
- Add support for A10 / sun4i.
- Rename driver to sunxi-a10-a20.
- Add previously unimplemented clocks.
- Document the audio pll hardcoded post-divider
- Add Acked-by: Rob Herring <robh@kernel.org> on patch 4
Priit Laes (5):
clk: sunxi-ng: Add sun4i/sun7i CCU driver
dt-bindings: List devicetree binding for the CCU of Allwinner A20
dt-bindings: List devicetree binding for the CCU of Allwinner A10
ARM: sun7i: Convert to CCU
ARM: sun4i: Convert to CCU
Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 2 +-
arch/arm/boot/dts/sun4i-a10.dtsi | 645 +----
arch/arm/boot/dts/sun7i-a20.dtsi | 720 +-----
drivers/clk/sunxi-ng/Kconfig | 14 +-
drivers/clk/sunxi-ng/Makefile | 1 +-
drivers/clk/sunxi-ng/ccu-sun4i-a10.c | 1443 ++++++++++-
drivers/clk/sunxi-ng/ccu-sun4i-a10.h | 60 +-
include/dt-bindings/clock/sun4i-a10-ccu.h | 207 +-
include/dt-bindings/reset/sun4i-a10-ccu.h | 67 +-
9 files changed, 1954 insertions(+), 1205 deletions(-)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h
base-commit: 4c5e651abcb0fe1c7dd61d4ceb0388cc4a80485f
--
git-series 0.9.1
^ permalink raw reply
* [RFC/RFT PATCH 07/18] ARM: PCI: orion5x: Convert PCI scan API to pci_scan_root_bus_bridge()
From: Andrew Lunn @ 2017-04-26 18:53 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20170426161335.GA12240@red-moon>
> > Note that IRQ 12 has disappeared from Flags: on 0000:00:00.0.
>
> Thank you for testing it, that's exactly what we need.
>
> To check if the plumbing is working (ie to check I have not messed
> up the bus scan API rework), mind testing the patch below please
> and report back (it applies on top of this series) ?
0000:00:00.0 Memory controller: Marvell Technology Group Ltd. 88f5182 [Orion-NAS] ARM SoC (rev 02)
Subsystem: Marvell Technology Group Ltd. Device 11ab
Flags: bus master, fast devsel, latency 0, IRQ 12
The interrupt is back with this patch.
Andrew
^ permalink raw reply
* [PATCH v8 4/4] arm64/syscalls: Optimize address limit check
From: Thomas Garnier @ 2017-04-26 18:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20170426183425.32158-1-thgarnie@google.com>
Disable the generic address limit check in favor of an architecture
specific optimized implementation.
The address limit is checked on each syscall return path to user-mode.
If it was changed, a generic handler is called to stop the kernel on an
explicit check.
Signed-off-by: Thomas Garnier <thgarnie@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
Based on next-20170426
---
arch/arm64/Kconfig | 1 +
arch/arm64/kernel/entry.S | 12 ++++++++++++
2 files changed, 13 insertions(+)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 3dcd7ec69bca..fe9466d3bf94 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -25,6 +25,7 @@ config ARM64
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
select ARCH_WANT_FRAME_POINTERS
select ARCH_HAS_UBSAN_SANITIZE_ALL
+ select ADDR_LIMIT_CHECK
select ARM_AMBA
select ARM_ARCH_TIMER
select ARM_GIC
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 43512d4d7df2..c895c4402d32 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -744,6 +744,8 @@ ENDPROC(cpu_switch_to)
ret_fast_syscall:
disable_irq // disable interrupts
str x0, [sp, #S_X0] // returned x0
+ ldr x2, [tsk, #TSK_TI_ADDR_LIMIT] // check addr limit change
+ tbnz x2, #63, addr_limit_fail
ldr x1, [tsk, #TSK_TI_FLAGS] // re-check for syscall tracing
and x2, x1, #_TIF_SYSCALL_WORK
cbnz x2, ret_fast_syscall_trace
@@ -771,6 +773,8 @@ work_pending:
*/
ret_to_user:
disable_irq // disable interrupts
+ ldr x2, [tsk, #TSK_TI_ADDR_LIMIT] // check addr limit change
+ tbnz x2, #63, addr_limit_fail
ldr x1, [tsk, #TSK_TI_FLAGS]
and x2, x1, #_TIF_WORK_MASK
cbnz x2, work_pending
@@ -780,6 +784,14 @@ finish_ret_to_user:
ENDPROC(ret_to_user)
/*
+ * Address limit was incorrect before returning in user-mode which could be
+ * used to elevate privileges. Call the generic handler to stop the kernel on
+ * the appropriate check. This function does not return.
+ */
+addr_limit_fail:
+ b addr_limit_check_failed
+
+/*
* This is how we return from a fork.
*/
ENTRY(ret_from_fork)
--
2.13.0.rc0.306.g87b477812d-goog
^ permalink raw reply related
* [PATCH v8 3/4] arm/syscalls: Optimize address limit check
From: Thomas Garnier @ 2017-04-26 18:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20170426183425.32158-1-thgarnie@google.com>
Disable the generic address limit check in favor of an architecture
specific optimized implementation.
The address limit is checked on each syscall return path to user-mode
path as well as the irq user-mode return function. If the address limit
was changed, a generic handler is called to stop the kernel on an
explicit check.
Signed-off-by: Thomas Garnier <thgarnie@google.com>
---
Based on next-20170426
---
arch/arm/Kconfig | 1 +
arch/arm/kernel/entry-common.S | 10 +++++++++-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4c1a35f15838..f17f30084a4e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,6 +12,7 @@ config ARM
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_HAS_GCOV_PROFILE_ALL
select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ADDR_LIMIT_CHECK
select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
select ARCH_SUPPORTS_ATOMIC_RMW
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index eb5cd77bf1d8..c83927498f40 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -12,6 +12,7 @@
#include <asm/unistd.h>
#include <asm/ftrace.h>
#include <asm/unwind.h>
+#include <asm/memory.h>
#ifdef CONFIG_AEABI
#include <asm/unistd-oabi.h>
#endif
@@ -27,7 +28,6 @@
#include "entry-header.S"
-
.align 5
#if !(IS_ENABLED(CONFIG_TRACE_IRQFLAGS) || IS_ENABLED(CONFIG_CONTEXT_TRACKING))
/*
@@ -40,9 +40,12 @@ ret_fast_syscall:
UNWIND(.fnstart )
UNWIND(.cantunwind )
disable_irq_notrace @ disable interrupts
+ ldr r2, [tsk, #TI_ADDR_LIMIT]
ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing
tst r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK
bne fast_work_pending
+ cmp r2, #TASK_SIZE
+ blne addr_limit_check_failed
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
@@ -66,6 +69,7 @@ ret_fast_syscall:
UNWIND(.cantunwind )
str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
disable_irq_notrace @ disable interrupts
+ ldr r2, [tsk, #TI_ADDR_LIMIT]
ldr r1, [tsk, #TI_FLAGS] @ re-check for syscall tracing
tst r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK
beq no_work_pending
@@ -82,6 +86,7 @@ slow_work_pending:
mov r2, why @ 'syscall'
bl do_work_pending
cmp r0, #0
+ ldreq r2, [tsk, #TI_ADDR_LIMIT]
beq no_work_pending
movlt scno, #(__NR_restart_syscall - __NR_SYSCALL_BASE)
ldmia sp, {r0 - r6} @ have to reload r0 - r6
@@ -99,9 +104,12 @@ ret_slow_syscall:
disable_irq_notrace @ disable interrupts
ENTRY(ret_to_user_from_irq)
ldr r1, [tsk, #TI_FLAGS]
+ ldr r2, [tsk, #TI_ADDR_LIMIT]
tst r1, #_TIF_WORK_MASK
bne slow_work_pending
no_work_pending:
+ cmp r2, #TASK_SIZE
+ blne addr_limit_check_failed
asm_trace_hardirqs_on save = 0
/* perform architecture specific actions before user return */
--
2.13.0.rc0.306.g87b477812d-goog
^ permalink raw reply related
* [PATCH v8 2/4] x86/syscalls: Optimize address limit check
From: Thomas Garnier @ 2017-04-26 18:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20170426183425.32158-1-thgarnie@google.com>
Disable the generic address limit check in favor of an architecture
specific optimized implementation.
The user-mode state check is added to the prepare_exit_to_usermode
function. This function is called before any user-mode return on 32-bit
and on the 64-bit syscall slowpath. For the 64-bit syscall fast path, an
assembly address limit check redirects to the slow path if the address
limit is different.
The TASK_SIZE_MAX definition is moved to the pgtable_64_types header so
it can be used in assembly code.
Signed-off-by: Thomas Garnier <thgarnie@google.com>
---
Based on next-20170426
---
arch/x86/Kconfig | 1 +
arch/x86/entry/common.c | 3 +++
arch/x86/entry/entry_64.S | 8 ++++++++
arch/x86/include/asm/pgtable_64_types.h | 11 +++++++++++
arch/x86/include/asm/processor.h | 11 -----------
5 files changed, 23 insertions(+), 11 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cd18994a9555..f3ce1859bd61 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -63,6 +63,7 @@ config X86
select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
+ select ADDR_LIMIT_CHECK
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT
select ARCH_SUPPORTS_NUMA_BALANCING if X86_64
diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
index cdefcfdd9e63..057d133d7b78 100644
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -23,6 +23,7 @@
#include <linux/user-return-notifier.h>
#include <linux/uprobes.h>
#include <linux/livepatch.h>
+#include <linux/syscalls.h>
#include <asm/desc.h>
#include <asm/traps.h>
@@ -183,6 +184,8 @@ __visible inline void prepare_exit_to_usermode(struct pt_regs *regs)
struct thread_info *ti = current_thread_info();
u32 cached_flags;
+ addr_limit_check_syscall();
+
if (IS_ENABLED(CONFIG_PROVE_LOCKING) && WARN_ON(!irqs_disabled()))
local_irq_disable();
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 607d72c4a485..62aca6dcdaf4 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -218,6 +218,14 @@ entry_SYSCALL_64_fastpath:
testl $_TIF_ALLWORK_MASK, TASK_TI_flags(%r11)
jnz 1f
+ /*
+ * If address limit is not based on user-mode, jump to slow path for
+ * additional security checks.
+ */
+ movq $TASK_SIZE_MAX, %rcx
+ cmp %rcx, TASK_addr_limit(%r11)
+ jne 1f
+
LOCKDEP_SYS_EXIT
TRACE_IRQS_ON /* user mode is traced as IRQs on */
movq RIP(%rsp), %rcx
diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h
index 06470da156ba..78af4d43a7ce 100644
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -104,4 +104,15 @@ typedef struct { pteval_t pte; } pte_t;
#define EARLY_DYNAMIC_PAGE_TABLES 64
+/*
+ * User space process size. 47bits minus one guard page. The guard
+ * page is necessary on Intel CPUs: if a SYSCALL instruction is at
+ * the highest possible canonical userspace address, then that
+ * syscall will enter the kernel with a non-canonical return
+ * address, and SYSRET will explode dangerously. We avoid this
+ * particular problem by preventing anything from being mapped
+ * at the maximum canonical address.
+ */
+#define TASK_SIZE_MAX ((_AC(1, UL) << 47) - PAGE_SIZE)
+
#endif /* _ASM_X86_PGTABLE_64_DEFS_H */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 3cada998a402..e80822582d3e 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -825,17 +825,6 @@ static inline void spin_lock_prefetch(const void *x)
#define KSTK_ESP(task) (task_pt_regs(task)->sp)
#else
-/*
- * User space process size. 47bits minus one guard page. The guard
- * page is necessary on Intel CPUs: if a SYSCALL instruction is at
- * the highest possible canonical userspace address, then that
- * syscall will enter the kernel with a non-canonical return
- * address, and SYSRET will explode dangerously. We avoid this
- * particular problem by preventing anything from being mapped
- * at the maximum canonical address.
- */
-#define TASK_SIZE_MAX ((1UL << 47) - PAGE_SIZE)
-
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
--
2.13.0.rc0.306.g87b477812d-goog
^ permalink raw reply related
* [PATCH v8 1/4] syscalls: Verify address limit before returning to user-mode
From: Thomas Garnier @ 2017-04-26 18:34 UTC (permalink / raw)
To: linux-arm-kernel
Ensure that a syscall does not return to user-mode with a kernel address
limit. If that happens, a process can corrupt kernel-mode memory and
elevate privileges [1].
The CONFIG_ADDR_LIMIT_CHECK option disables the generic check so each
architecture can create optimized versions.
[1] https://bugs.chromium.org/p/project-zero/issues/detail?id=990
Signed-off-by: Thomas Garnier <thgarnie@google.com>
Tested-by: Kees Cook <keescook@chromium.org>
---
Based on next-20170426
---
arch/s390/Kconfig | 1 +
include/linux/syscalls.h | 27 ++++++++++++++++++++++++++-
init/Kconfig | 6 ++++++
kernel/sys.c | 13 +++++++++++++
4 files changed, 46 insertions(+), 1 deletion(-)
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index d25435d94b6e..164de1d24e92 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -103,6 +103,7 @@ config S390
select ARCH_INLINE_WRITE_UNLOCK_BH
select ARCH_INLINE_WRITE_UNLOCK_IRQ
select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
+ select ADDR_LIMIT_CHECK
select ARCH_SAVE_PAGE_KEYS if HIBERNATION
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 980c3c9b06f8..ebde64f1622c 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -191,6 +191,28 @@ extern struct trace_event_functions exit_syscall_print_funcs;
SYSCALL_METADATA(sname, x, __VA_ARGS__) \
__SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
+
+/*
+ * Called before coming back to user-mode. Returning to user-mode with an
+ * address limit different than USER_DS can allow to overwrite kernel memory.
+ */
+static inline void addr_limit_check_syscall(void)
+{
+ BUG_ON(!segment_eq(get_fs(), USER_DS));
+}
+
+#ifndef CONFIG_ADDR_LIMIT_CHECK
+#define __CHECK_USERMODE_SYSCALL() \
+ bool user_caller = segment_eq(get_fs(), USER_DS)
+#define __VERIFY_ADDR_LIMIT() \
+ if (user_caller) addr_limit_check_syscall()
+#else
+#define __CHECK_USERMODE_SYSCALL()
+#define __VERIFY_ADDR_LIMIT()
+asmlinkage void addr_limit_check_failed(void) __noreturn;
+#endif
+
+
#define __PROTECT(...) asmlinkage_protect(__VA_ARGS__)
#define __SYSCALL_DEFINEx(x, name, ...) \
asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) \
@@ -199,7 +221,10 @@ extern struct trace_event_functions exit_syscall_print_funcs;
asmlinkage long SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__)); \
asmlinkage long SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \
{ \
- long ret = SYSC##name(__MAP(x,__SC_CAST,__VA_ARGS__)); \
+ long ret; \
+ __CHECK_USERMODE_SYSCALL(); \
+ ret = SYSC##name(__MAP(x,__SC_CAST,__VA_ARGS__)); \
+ __VERIFY_ADDR_LIMIT(); \
__MAP(x,__SC_TEST,__VA_ARGS__); \
__PROTECT(x, ret,__MAP(x,__SC_ARGS,__VA_ARGS__)); \
return ret; \
diff --git a/init/Kconfig b/init/Kconfig
index 42a346b0df43..599d9fe30703 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1961,6 +1961,12 @@ config PROFILING
config TRACEPOINTS
bool
+config ADDR_LIMIT_CHECK
+ bool
+ help
+ Disable the generic address limit check. Allow each architecture to
+ optimize how and when the verification is done.
+
source "arch/Kconfig"
endmenu # General setup
diff --git a/kernel/sys.c b/kernel/sys.c
index 8a94b4eabcaa..a1cbcd715d62 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -2458,3 +2458,16 @@ COMPAT_SYSCALL_DEFINE1(sysinfo, struct compat_sysinfo __user *, info)
return 0;
}
#endif /* CONFIG_COMPAT */
+
+#ifdef CONFIG_ADDR_LIMIT_CHECK
+/*
+ * Used when an architecture specific implementation detects an invalid address
+ * limit. This function does not return.
+ */
+asmlinkage void addr_limit_check_failed(void)
+{
+ /* Try to fail on the generic address limit check */
+ addr_limit_check_syscall();
+ panic("Invalid address limit before returning to user-mode");
+}
+#endif
--
2.13.0.rc0.306.g87b477812d-goog
^ permalink raw reply related
* [PATCH] perf evsel: Fix to perf-stat malloc corruption on arm64 platforms
From: Ganapatrao Kulkarni @ 2017-04-26 18:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20170426171208.GC23669@leverpostej>
Hi Mark,
On Wed, Apr 26, 2017 at 10:42 PM, Mark Rutland <mark.rutland@arm.com> wrote:
> On Wed, Apr 26, 2017 at 03:50:57PM +0100, Mark Rutland wrote:
>> Hi Ganapatrao,
>>
>> Thanks for tracking this down.
>>
>> On Wed, Apr 26, 2017 at 02:56:20PM +0530, Ganapatrao Kulkarni wrote:
>> > In some cases, ncpus used for perf_evsel__alloc_fd and for
>> > perf_evsel__close are not the same, this is causing memory
>> > overwrite/corruption.
>>
>> It would be good if we could enumerate when this occurs.
>>
>> From what I can tell, the problem occurs when opening a thread-bound
>> event on PMU with a cpus/cpumask in sysfs.
>>
>> For perf-stat we create events using create_perf_stat_counter(). There
>> we see !target_has_cpu(), so we call perf_evsel__open_per_thread(). Thus
>> perf_evsel__open() is passed NULL cpus, and creates an empty cpu_map. As
>> cpus->nr = 1, we get 1 * nthreads fds allocated, and open events for
>> each of these.
>>
>> Later, we try to close events using perf_evlist__close(). This doesn't
>> take target_has_cpu() into account, but sees evsel->cpus is non-NULL
>> (since the PMU had a cpus/cpumask file), and tries to close events for
>> cpus->nr * nthreads, and goes out-of-bounds of the fd array.
>
> Looking further, I introduced this inconsistency in commit:
>
> 3df33eff2ba96be4 ("perf stat: Avoid skew when reading events ")
>
> To fix that, perf-stat needs to control the closing of its events, to
> match what it does when opening them. I've spun the below to do that,
> introducing new helpers to make it clear.
>
> Does that work for you?
>
> Thanks,
> Mark.
>
> ---->8----
> diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
> index 13b5499..638aefa 100644
> --- a/tools/perf/builtin-stat.c
> +++ b/tools/perf/builtin-stat.c
> @@ -346,6 +346,28 @@ static void read_counters(void)
> }
> }
>
> +/*
> + * Close all evnt FDs we open in __run_perf_stat() and
> + * create_perf_stat_counter(), taking care to match the number of threads and CPUs.
> + *
> + * Note that perf_evlist__close(evsel_list) is not equivalent, as it doesn't
> + * take the target into account.
> + */
> +static void close_counters(void)
> +{
> + bool per_cpu = target__has_cpu(&target);
> + struct perf_evsel *evsel;
> +
> + evlist__for_each_entry(evsel_list, evsel) {
> + if (per_cpu)
> + perf_evsel__close_per_cpu(evsel,
> + perf_evsel__cpus(evsel));
> + else
> + perf_evsel__close_per_thread(evsel,
> + evsel_list->threads);
> + }
> +}
> +
> static void process_interval(void)
> {
> struct timespec ts, rs;
> @@ -686,7 +708,7 @@ static int __run_perf_stat(int argc, const char **argv)
> * group leaders.
> */
> read_counters();
> - perf_evlist__close(evsel_list);
> + close_counters();
>
> return WEXITSTATUS(status);
> }
> diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
> index ac59710..726ceca 100644
> --- a/tools/perf/util/evsel.c
> +++ b/tools/perf/util/evsel.c
> @@ -1670,6 +1670,18 @@ int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
> return err;
> }
>
> +int perf_evsel__open_per_cpu(struct perf_evsel *evsel,
> + struct cpu_map *cpus)
> +{
> + return perf_evsel__open(evsel, cpus, NULL);
> +}
> +
> +int perf_evsel__open_per_thread(struct perf_evsel *evsel,
> + struct thread_map *threads)
> +{
> + return perf_evsel__open(evsel, NULL, threads);
> +}
> +
> void perf_evsel__close(struct perf_evsel *evsel, int ncpus, int nthreads)
> {
> if (evsel->fd == NULL)
> @@ -1679,16 +1691,18 @@ void perf_evsel__close(struct perf_evsel *evsel, int ncpus, int nthreads)
> perf_evsel__free_fd(evsel);
> }
>
> -int perf_evsel__open_per_cpu(struct perf_evsel *evsel,
> - struct cpu_map *cpus)
> +void perf_evsel__close_per_cpu(struct perf_evsel *evsel,
> + struct cpu_map *cpus)
> {
> - return perf_evsel__open(evsel, cpus, NULL);
> + int ncpus = cpus ? cpus->nr : 1;
> + perf_evsel__close(evsel, ncpus, 1);
> }
>
> -int perf_evsel__open_per_thread(struct perf_evsel *evsel,
> - struct thread_map *threads)
> +void perf_evsel__close_per_thread(struct perf_evsel *evsel,
> + struct thread_map *threads)
> {
> - return perf_evsel__open(evsel, NULL, threads);
> + int nthreads = threads ? threads->nr : 1;
> + perf_evsel__close(evsel, 1, nthreads);
> }
>
> static int perf_evsel__parse_id_sample(const struct perf_evsel *evsel,
> diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
> index 06ef6f2..02bea43 100644
> --- a/tools/perf/util/evsel.h
> +++ b/tools/perf/util/evsel.h
> @@ -252,6 +252,10 @@ int perf_evsel__open_per_thread(struct perf_evsel *evsel,
> struct thread_map *threads);
> int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
> struct thread_map *threads);
> +void perf_evsel__close_per_cpu(struct perf_evsel *evsel,
> + struct cpu_map *cpus);
> +void perf_evsel__close_per_thread(struct perf_evsel *evsel,
> + struct thread_map *threads);
> void perf_evsel__close(struct perf_evsel *evsel, int ncpus, int nthreads);
>
> struct perf_sample;
this diff looks to me doing same as mine.
i think below diff should be more appropriate fix to this issue?
when open allocates and uses dummy cpus, there is no point in holding
old unused one.
instead it should free and link to dummy cpus which is created with 1 CPU.
same will be used by close.
i did quick testing on both x86 and arm64.
testing looks ok, may need more testing!
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index ac59710..b1aab0a 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -1466,9 +1466,13 @@ int perf_evsel__open(struct perf_evsel *evsel,
struct cpu_map *cpus,
empty_cpu_map = cpu_map__dummy_new();
if (empty_cpu_map == NULL)
return -ENOMEM;
+ } else {
+ cpu_map__get(empty_cpu_map);
}
cpus = empty_cpu_map;
+ cpu_map__put(evsel->cpus);
+ evsel->cpus = cpus;
}
if (threads == NULL) {
gkulkarni at localhost>perf>>
thanks
Ganapat
^ permalink raw reply related
* [PATCH] ARM: Fix __show_regs output timestamps
From: Joe Perches @ 2017-04-26 17:39 UTC (permalink / raw)
To: linux-arm-kernel
Multiple line formats are not preferred as the second and
subsequent lines may not have timestamps.
Lacking timestamps makes reading the output a bit difficult.
This also makes arm/arm64 output more similar.
Previous:
[ 1514.093231] pc : [<bf79c304>] lr : [<bf79ced8>] psr: a00f0013
sp : ecdd7e20 ip : 00000000 fp : ffffffff
New:
[ 1514.093231] pc : [<bf79c304>] lr : [<bf79ced8>] psr: a00f0013
[ 1514.105316] sp : ecdd7e20 ip : 00000000 fp : ffffffff
Signed-off-by: Joe Perches <joe@perches.com>
---
arch/arm/kernel/process.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 939e8b58c59d..151cece4a293 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -123,10 +123,10 @@ void __show_regs(struct pt_regs *regs)
print_symbol("PC is at %s\n", instruction_pointer(regs));
print_symbol("LR is at %s\n", regs->ARM_lr);
- printk("pc : [<%08lx>] lr : [<%08lx>] psr: %08lx\n"
- "sp : %08lx ip : %08lx fp : %08lx\n",
- regs->ARM_pc, regs->ARM_lr, regs->ARM_cpsr,
- regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
+ printk("pc : [<%08lx>] lr : [<%08lx>] psr: %08lx\n",
+ regs->ARM_pc, regs->ARM_lr, regs->ARM_cpsr);
+ printk("sp : %08lx ip : %08lx fp : %08lx\n",
+ regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
printk("r10: %08lx r9 : %08lx r8 : %08lx\n",
regs->ARM_r10, regs->ARM_r9,
regs->ARM_r8);
--
2.10.0.rc2.1.g053435c
^ permalink raw reply related
* [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.
From: Eric Anholt @ 2017-04-26 17:26 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <0cb00eb7-41d0-0390-4687-d966499ed9f4@gmail.com>
Florian Fainelli <f.fainelli@gmail.com> writes:
> On 04/25/2017 04:53 PM, Eric Anholt wrote:
>> Cygnus has a single AMAC controller connected to the B53 switch with 2
>> PHYs. On the BCM911360_EP platform, those two PHYs are connected to
>> the external ethernet jacks.
>>
>> Signed-off-by: Eric Anholt <eric@anholt.net>
>> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>>
>> v2: Call the node "switch", just call the ports "port" (suggestions by
>> Florian), drop max-speed on the phys (suggestion by Andrew Lunn),
>> call the other nodes "ethernet" and "ethernet-phy" (suggestions by
>> Sergei Shtylyov)
>>
>> arch/arm/boot/dts/bcm-cygnus.dtsi | 58 ++++++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/bcm911360_entphn.dts | 8 +++++
>> 2 files changed, 66 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> index 009f1346b817..9fd89be0f5e0 100644
>> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
>> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> @@ -142,6 +142,54 @@
>> interrupts = <0>;
>> };
>>
>> + mdio: mdio at 18002000 {
>> + compatible = "brcm,iproc-mdio";
>> + reg = <0x18002000 0x8>;
>> + #size-cells = <1>;
>> + #address-cells = <0>;
>
> Sorry for not noticing earlier, since you override this correctly in the
> board-level DTS file can you put a:
>
> status = "disabled"
>
> property in there by default?
Done.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170426/e5d1c373/attachment-0001.sig>
^ permalink raw reply
* [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.
From: Eric Anholt @ 2017-04-26 17:26 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <0cb00eb7-41d0-0390-4687-d966499ed9f4@gmail.com>
Florian Fainelli <f.fainelli@gmail.com> writes:
> On 04/25/2017 04:53 PM, Eric Anholt wrote:
>> Cygnus has a single AMAC controller connected to the B53 switch with 2
>> PHYs. On the BCM911360_EP platform, those two PHYs are connected to
>> the external ethernet jacks.
>>
>> Signed-off-by: Eric Anholt <eric@anholt.net>
>> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>>
>> v2: Call the node "switch", just call the ports "port" (suggestions by
>> Florian), drop max-speed on the phys (suggestion by Andrew Lunn),
>> call the other nodes "ethernet" and "ethernet-phy" (suggestions by
>> Sergei Shtylyov)
>>
>> arch/arm/boot/dts/bcm-cygnus.dtsi | 58 ++++++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/bcm911360_entphn.dts | 8 +++++
>> 2 files changed, 66 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> index 009f1346b817..9fd89be0f5e0 100644
>> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
>> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
>> @@ -142,6 +142,54 @@
>> interrupts = <0>;
>> };
>>
>> + mdio: mdio at 18002000 {
>> + compatible = "brcm,iproc-mdio";
>> + reg = <0x18002000 0x8>;
>> + #size-cells = <1>;
>> + #address-cells = <0>;
>
> Sorry for not noticing earlier, since you override this correctly in the
> board-level DTS file can you put a:
>
> status = "disabled"
>
> property in there by default?
I didn't have the override in the board file either, just switch and
ethernet. Fixed.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170426/4bef529a/attachment-0001.sig>
^ permalink raw reply
* [PATCH v2 2/2] ARM: dts: Add the ethernet and ethernet PHY to the cygnus core DT.
From: Eric Anholt @ 2017-04-26 17:25 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20170426004907.GA9453@lunn.ch>
Andrew Lunn <andrew@lunn.ch> writes:
>> + eth0: ethernet at 18042000 {
>> + compatible = "brcm,amac";
>> + reg = <0x18042000 0x1000>,
>> + <0x18110000 0x1000>;
>> + reg-names = "amac_base", "idm_base";
>> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
>> + max-speed = <1000>;
>
> Hi Eric
>
> Sorry i missed this the first time. Does this Ethernet controller do >
> 1Gbps? Does this max-speed do anything useful?
It doesn't look like it. Dropped.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170426/66f27462/attachment.sig>
^ permalink raw reply
* [PATCH v4 00/21] PCI: fix config space memory mappings
From: Jingoo Han @ 2017-04-26 17:24 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <361fde15-5ba3-d33b-f946-003e89ba071f@huawei.com>
On Wednesday, April 26, 2017 6:54 AM, Dongdong Liu wrote;
>
> Tested-by: Dongdong Liu <liudongdong3@huawei.com>
>
> I tested the patchset on HiSilicon ARM64 D05 board.It works ok with 82599
> netcard.
Thank you for testing these patches. HiSilicon PCIe may use Designware-based
PCIe controller. In my opinion, other Designware-based PCIe controller will
work properly.
To Dongdong Liu, Khuong Dinh, and other people,
If possible, can you check the output of 'lspci -v'?
If you find something different, please share it with us.
Good luck.
Best regards,
Jingoo Han
>
> Thanks,
> Dongdong
> ? 2017/4/25 14:40, Jon Masters ??:
> > On 04/19/2017 12:48 PM, Lorenzo Pieralisi wrote:
> >
> >> On some platforms (ie ARM/ARM64) ioremap fails to comply with the PCI
> >> configuration non-posted write transactions requirement, because it
> >> provides a memory mapping that issues "bufferable" or, in PCI terms
> >> "posted" write transactions. Likewise, the current pci_remap_iospace()
> >> implementation maps the physical address range that the PCI translates
> >> to I/O space cycles to virtual address space through pgprot_device()
> >> attributes that on eg ARM64 provides a memory mapping issuing
> >> posted writes transactions, which is not PCI specifications compliant.
> >
> > Side note that I've pinged all of the ARM server vendors and asked them
> > to verify this patch series on their platforms.
> >
> > Jon.
> >
> > .
> >
^ permalink raw reply
* [PATCH 1/2] xen/arm, arm64: fix xen_dma_ops after 815dd18 "Consolidate get_dma_ops..."
From: Stefano Stabellini @ 2017-04-26 17:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20170426171348.GE9406@e104818-lin.cambridge.arm.com>
On Wed, 26 Apr 2017, Catalin Marinas wrote:
> On Wed, Apr 26, 2017 at 10:00:30AM -0700, Stefano Stabellini wrote:
> > On Wed, 26 Apr 2017, Catalin Marinas wrote:
> > > On Tue, Apr 25, 2017 at 10:22:00AM -0700, Stefano Stabellini wrote:
> > > > On Tue, 25 Apr 2017, Julien Grall wrote:
> > > > > On 24/04/17 20:16, Stefano Stabellini wrote:
> > > > > > Given the outstanding regression we need to fix as soon as possible,
> > > > > > I'll queue these patches on the xentip tree for 4.12.
> > > > >
> > > > > It looks like there is another rc for 4.11. I am wondering whether you could
> > > > > try to send a pull request to Linus so it can be fixed in 4.11?
> > > >
> > > > No, especially without input from Russell.
> > >
> > > You could add a "Fixes" tag to the first patch so that it gets
> > > back-ported to 4.11.x once it hits mainline (the second patch is just
> > > cosmetic):
> > >
> > > Fixes: 815dd18788fe ("treewide: Consolidate get_dma_ops() implementations")
> >
> > I did add:
> >
> > Cc: <stable@vger.kernel.org> [4.11+]
> >
> > I thought that would be enough to trigger a backport?
>
> Either would do. I didn't see it in the patch you posted, that's why I
> mentioned it.
Thanks, I appreciated it!
^ permalink raw reply
* [PATCH 1/2] xen/arm, arm64: fix xen_dma_ops after 815dd18 "Consolidate get_dma_ops..."
From: Catalin Marinas @ 2017-04-26 17:13 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <alpine.DEB.2.10.1704260959440.2875@sstabellini-ThinkPad-X260>
On Wed, Apr 26, 2017 at 10:00:30AM -0700, Stefano Stabellini wrote:
> On Wed, 26 Apr 2017, Catalin Marinas wrote:
> > On Tue, Apr 25, 2017 at 10:22:00AM -0700, Stefano Stabellini wrote:
> > > On Tue, 25 Apr 2017, Julien Grall wrote:
> > > > On 24/04/17 20:16, Stefano Stabellini wrote:
> > > > > Given the outstanding regression we need to fix as soon as possible,
> > > > > I'll queue these patches on the xentip tree for 4.12.
> > > >
> > > > It looks like there is another rc for 4.11. I am wondering whether you could
> > > > try to send a pull request to Linus so it can be fixed in 4.11?
> > >
> > > No, especially without input from Russell.
> >
> > You could add a "Fixes" tag to the first patch so that it gets
> > back-ported to 4.11.x once it hits mainline (the second patch is just
> > cosmetic):
> >
> > Fixes: 815dd18788fe ("treewide: Consolidate get_dma_ops() implementations")
>
> I did add:
>
> Cc: <stable@vger.kernel.org> [4.11+]
>
> I thought that would be enough to trigger a backport?
Either would do. I didn't see it in the patch you posted, that's why I
mentioned it.
--
Catalin
^ permalink raw reply
* [PATCH] perf evsel: Fix to perf-stat malloc corruption on arm64 platforms
From: Mark Rutland @ 2017-04-26 17:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20170426145057.GK27156@leverpostej>
On Wed, Apr 26, 2017 at 03:50:57PM +0100, Mark Rutland wrote:
> Hi Ganapatrao,
>
> Thanks for tracking this down.
>
> On Wed, Apr 26, 2017 at 02:56:20PM +0530, Ganapatrao Kulkarni wrote:
> > In some cases, ncpus used for perf_evsel__alloc_fd and for
> > perf_evsel__close are not the same, this is causing memory
> > overwrite/corruption.
>
> It would be good if we could enumerate when this occurs.
>
> From what I can tell, the problem occurs when opening a thread-bound
> event on PMU with a cpus/cpumask in sysfs.
>
> For perf-stat we create events using create_perf_stat_counter(). There
> we see !target_has_cpu(), so we call perf_evsel__open_per_thread(). Thus
> perf_evsel__open() is passed NULL cpus, and creates an empty cpu_map. As
> cpus->nr = 1, we get 1 * nthreads fds allocated, and open events for
> each of these.
>
> Later, we try to close events using perf_evlist__close(). This doesn't
> take target_has_cpu() into account, but sees evsel->cpus is non-NULL
> (since the PMU had a cpus/cpumask file), and tries to close events for
> cpus->nr * nthreads, and goes out-of-bounds of the fd array.
Looking further, I introduced this inconsistency in commit:
3df33eff2ba96be4 ("perf stat: Avoid skew when reading events ")
To fix that, perf-stat needs to control the closing of its events, to
match what it does when opening them. I've spun the below to do that,
introducing new helpers to make it clear.
Does that work for you?
Thanks,
Mark.
---->8----
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 13b5499..638aefa 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -346,6 +346,28 @@ static void read_counters(void)
}
}
+/*
+ * Close all evnt FDs we open in __run_perf_stat() and
+ * create_perf_stat_counter(), taking care to match the number of threads and CPUs.
+ *
+ * Note that perf_evlist__close(evsel_list) is not equivalent, as it doesn't
+ * take the target into account.
+ */
+static void close_counters(void)
+{
+ bool per_cpu = target__has_cpu(&target);
+ struct perf_evsel *evsel;
+
+ evlist__for_each_entry(evsel_list, evsel) {
+ if (per_cpu)
+ perf_evsel__close_per_cpu(evsel,
+ perf_evsel__cpus(evsel));
+ else
+ perf_evsel__close_per_thread(evsel,
+ evsel_list->threads);
+ }
+}
+
static void process_interval(void)
{
struct timespec ts, rs;
@@ -686,7 +708,7 @@ static int __run_perf_stat(int argc, const char **argv)
* group leaders.
*/
read_counters();
- perf_evlist__close(evsel_list);
+ close_counters();
return WEXITSTATUS(status);
}
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index ac59710..726ceca 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -1670,6 +1670,18 @@ int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
return err;
}
+int perf_evsel__open_per_cpu(struct perf_evsel *evsel,
+ struct cpu_map *cpus)
+{
+ return perf_evsel__open(evsel, cpus, NULL);
+}
+
+int perf_evsel__open_per_thread(struct perf_evsel *evsel,
+ struct thread_map *threads)
+{
+ return perf_evsel__open(evsel, NULL, threads);
+}
+
void perf_evsel__close(struct perf_evsel *evsel, int ncpus, int nthreads)
{
if (evsel->fd == NULL)
@@ -1679,16 +1691,18 @@ void perf_evsel__close(struct perf_evsel *evsel, int ncpus, int nthreads)
perf_evsel__free_fd(evsel);
}
-int perf_evsel__open_per_cpu(struct perf_evsel *evsel,
- struct cpu_map *cpus)
+void perf_evsel__close_per_cpu(struct perf_evsel *evsel,
+ struct cpu_map *cpus)
{
- return perf_evsel__open(evsel, cpus, NULL);
+ int ncpus = cpus ? cpus->nr : 1;
+ perf_evsel__close(evsel, ncpus, 1);
}
-int perf_evsel__open_per_thread(struct perf_evsel *evsel,
- struct thread_map *threads)
+void perf_evsel__close_per_thread(struct perf_evsel *evsel,
+ struct thread_map *threads)
{
- return perf_evsel__open(evsel, NULL, threads);
+ int nthreads = threads ? threads->nr : 1;
+ perf_evsel__close(evsel, 1, nthreads);
}
static int perf_evsel__parse_id_sample(const struct perf_evsel *evsel,
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index 06ef6f2..02bea43 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -252,6 +252,10 @@ int perf_evsel__open_per_thread(struct perf_evsel *evsel,
struct thread_map *threads);
int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
struct thread_map *threads);
+void perf_evsel__close_per_cpu(struct perf_evsel *evsel,
+ struct cpu_map *cpus);
+void perf_evsel__close_per_thread(struct perf_evsel *evsel,
+ struct thread_map *threads);
void perf_evsel__close(struct perf_evsel *evsel, int ncpus, int nthreads);
struct perf_sample;
^ permalink raw reply related
* [PATCH 1/2] xen/arm, arm64: fix xen_dma_ops after 815dd18 "Consolidate get_dma_ops..."
From: Stefano Stabellini @ 2017-04-26 17:00 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20170426111906.GA9406@e104818-lin.cambridge.arm.com>
On Wed, 26 Apr 2017, Catalin Marinas wrote:
> On Tue, Apr 25, 2017 at 10:22:00AM -0700, Stefano Stabellini wrote:
> > On Tue, 25 Apr 2017, Julien Grall wrote:
> > > On 24/04/17 20:16, Stefano Stabellini wrote:
> > > > Given the outstanding regression we need to fix as soon as possible,
> > > > I'll queue these patches on the xentip tree for 4.12.
> > >
> > > It looks like there is another rc for 4.11. I am wondering whether you could
> > > try to send a pull request to Linus so it can be fixed in 4.11?
> >
> > No, especially without input from Russell.
>
> You could add a "Fixes" tag to the first patch so that it gets
> back-ported to 4.11.x once it hits mainline (the second patch is just
> cosmetic):
>
> Fixes: 815dd18788fe ("treewide: Consolidate get_dma_ops() implementations")
I did add:
Cc: <stable@vger.kernel.org> [4.11+]
I thought that would be enough to trigger a backport?
^ permalink raw reply
* [PATCH] soc: mediatek: Use devm_kcalloc() in init_scp()
From: SF Markus Elfring @ 2017-04-26 16:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 26 Apr 2017 18:33:15 +0200
Multiplications for the size determination of memory allocations
indicated that array data structures should be processed.
Thus use the corresponding function "devm_kcalloc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
drivers/soc/mediatek/mtk-scpsys.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index beb79162369a..9abf2b067ec6 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -365,15 +365,14 @@ static struct scp *init_scp(struct platform_device *pdev,
if (IS_ERR(scp->base))
return ERR_CAST(scp->base);
- scp->domains = devm_kzalloc(&pdev->dev,
- sizeof(*scp->domains) * num, GFP_KERNEL);
+ scp->domains = devm_kcalloc(&pdev->dev, num, sizeof(*scp->domains),
+ GFP_KERNEL);
if (!scp->domains)
return ERR_PTR(-ENOMEM);
pd_data = &scp->pd_data;
-
- pd_data->domains = devm_kzalloc(&pdev->dev,
- sizeof(*pd_data->domains) * num, GFP_KERNEL);
+ pd_data->domains = devm_kcalloc(&pdev->dev, num,
+ sizeof(*pd_data->domains), GFP_KERNEL);
if (!pd_data->domains)
return ERR_PTR(-ENOMEM);
--
2.12.2
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox