* [PATCH v7 02/13] docs: driver-api: add iio hw consumer section
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512744566-13233-1-git-send-email-arnaud.pouliquen@st.com>
This adds a section about the Hardware consumer
API of the IIO subsystem to the driver API
documentation.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
Documentation/driver-api/iio/hw-consumer.rst | 51 ++++++++++++++++++++++++++++
Documentation/driver-api/iio/index.rst | 1 +
2 files changed, 52 insertions(+)
create mode 100644 Documentation/driver-api/iio/hw-consumer.rst
diff --git a/Documentation/driver-api/iio/hw-consumer.rst b/Documentation/driver-api/iio/hw-consumer.rst
new file mode 100644
index 0000000..8facce6
--- /dev/null
+++ b/Documentation/driver-api/iio/hw-consumer.rst
@@ -0,0 +1,51 @@
+===========
+HW consumer
+===========
+An IIO device can be directly connected to another device in hardware. in this
+case the buffers between IIO provider and IIO consumer are handled by hardware.
+The Industrial I/O HW consumer offers a way to bond these IIO devices without
+software buffer for data. The implementation can be found under
+:file:`drivers/iio/buffer/hw-consumer.c`
+
+
+* struct :c:type:`iio_hw_consumer` ? Hardware consumer structure
+* :c:func:`iio_hw_consumer_alloc` ? Allocate IIO hardware consumer
+* :c:func:`iio_hw_consumer_free` ? Free IIO hardware consumer
+* :c:func:`iio_hw_consumer_enable` ? Enable IIO hardware consumer
+* :c:func:`iio_hw_consumer_disable` ? Disable IIO hardware consumer
+
+
+HW consumer setup
+=================
+
+As standard IIO device the implementation is based on IIO provider/consumer.
+A typical IIO HW consumer setup looks like this::
+
+ static struct iio_hw_consumer *hwc;
+
+ static const struct iio_info adc_info = {
+ .read_raw = adc_read_raw,
+ };
+
+ static int adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+ {
+ ret = iio_hw_consumer_enable(hwc);
+
+ /* Acquire data */
+
+ ret = iio_hw_consumer_disable(hwc);
+ }
+
+ static int adc_probe(struct platform_device *pdev)
+ {
+ hwc = devm_iio_hw_consumer_alloc(&iio->dev);
+ }
+
+More details
+============
+.. kernel-doc:: include/linux/iio/hw-consumer.h
+.. kernel-doc:: drivers/iio/buffer/industrialio-hw-consumer.c
+ :export:
+
diff --git a/Documentation/driver-api/iio/index.rst b/Documentation/driver-api/iio/index.rst
index e5c3922..7fba341 100644
--- a/Documentation/driver-api/iio/index.rst
+++ b/Documentation/driver-api/iio/index.rst
@@ -15,3 +15,4 @@ Contents:
buffers
triggers
triggered-buffers
+ hw-consumer
--
2.7.4
^ permalink raw reply related
* [PATCH v7 01/13] iio: Add hardware consumer buffer support
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512744566-13233-1-git-send-email-arnaud.pouliquen@st.com>
From: Lars-Peter Clausen <lars@metafoo.de>
Hardware consumer interface can be used when one IIO device has
a direct connection to another device in hardware.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
V6 to V7 update:
- SPDX-Licensing
drivers/iio/buffer/Kconfig | 10 ++
drivers/iio/buffer/Makefile | 1 +
drivers/iio/buffer/industrialio-hw-consumer.c | 181 ++++++++++++++++++++++++++
include/linux/iio/hw-consumer.h | 19 +++
4 files changed, 211 insertions(+)
create mode 100644 drivers/iio/buffer/industrialio-hw-consumer.c
create mode 100644 include/linux/iio/hw-consumer.h
diff --git a/drivers/iio/buffer/Kconfig b/drivers/iio/buffer/Kconfig
index 4ffd3db..338774c 100644
--- a/drivers/iio/buffer/Kconfig
+++ b/drivers/iio/buffer/Kconfig
@@ -29,6 +29,16 @@ config IIO_BUFFER_DMAENGINE
Should be selected by drivers that want to use this functionality.
+config IIO_BUFFER_HW_CONSUMER
+ tristate "Industrial I/O HW buffering"
+ help
+ Provides a way to bonding when an IIO device has a direct connection
+ to another device in hardware. In this case buffers for data transfers
+ are handled by hardware.
+
+ Should be selected by drivers that want to use the generic Hw consumer
+ interface.
+
config IIO_KFIFO_BUF
tristate "Industrial I/O buffering based on kfifo"
help
diff --git a/drivers/iio/buffer/Makefile b/drivers/iio/buffer/Makefile
index 85beaae..324a36b 100644
--- a/drivers/iio/buffer/Makefile
+++ b/drivers/iio/buffer/Makefile
@@ -6,5 +6,6 @@
obj-$(CONFIG_IIO_BUFFER_CB) += industrialio-buffer-cb.o
obj-$(CONFIG_IIO_BUFFER_DMA) += industrialio-buffer-dma.o
obj-$(CONFIG_IIO_BUFFER_DMAENGINE) += industrialio-buffer-dmaengine.o
+obj-$(CONFIG_IIO_BUFFER_HW_CONSUMER) += industrialio-hw-consumer.o
obj-$(CONFIG_IIO_TRIGGERED_BUFFER) += industrialio-triggered-buffer.o
obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
diff --git a/drivers/iio/buffer/industrialio-hw-consumer.c b/drivers/iio/buffer/industrialio-hw-consumer.c
new file mode 100644
index 0000000..993ecdc
--- /dev/null
+++ b/drivers/iio/buffer/industrialio-hw-consumer.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2017 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ */
+
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/hw-consumer.h>
+#include <linux/iio/buffer_impl.h>
+
+/**
+ * struct iio_hw_consumer - IIO hw consumer block
+ * @buffers: hardware buffers list head.
+ * @channels: IIO provider channels.
+ */
+struct iio_hw_consumer {
+ struct list_head buffers;
+ struct iio_channel *channels;
+};
+
+struct hw_consumer_buffer {
+ struct list_head head;
+ struct iio_dev *indio_dev;
+ struct iio_buffer buffer;
+ long scan_mask[];
+};
+
+static struct hw_consumer_buffer *iio_buffer_to_hw_consumer_buffer(
+ struct iio_buffer *buffer)
+{
+ return container_of(buffer, struct hw_consumer_buffer, buffer);
+}
+
+static void iio_hw_buf_release(struct iio_buffer *buffer)
+{
+ struct hw_consumer_buffer *hw_buf =
+ iio_buffer_to_hw_consumer_buffer(buffer);
+ kfree(hw_buf);
+}
+
+static const struct iio_buffer_access_funcs iio_hw_buf_access = {
+ .release = &iio_hw_buf_release,
+ .modes = INDIO_BUFFER_HARDWARE,
+};
+
+static struct hw_consumer_buffer *iio_hw_consumer_get_buffer(
+ struct iio_hw_consumer *hwc, struct iio_dev *indio_dev)
+{
+ size_t mask_size = BITS_TO_LONGS(indio_dev->masklength) * sizeof(long);
+ struct hw_consumer_buffer *buf;
+
+ list_for_each_entry(buf, &hwc->buffers, head) {
+ if (buf->indio_dev == indio_dev)
+ return buf;
+ }
+
+ buf = kzalloc(sizeof(*buf) + mask_size, GFP_KERNEL);
+ if (!buf)
+ return NULL;
+
+ buf->buffer.access = &iio_hw_buf_access;
+ buf->indio_dev = indio_dev;
+ buf->buffer.scan_mask = buf->scan_mask;
+
+ iio_buffer_init(&buf->buffer);
+ list_add_tail(&buf->head, &hwc->buffers);
+
+ return buf;
+}
+
+/**
+ * iio_hw_consumer_alloc() - Allocate IIO hardware consumer
+ * @dev: Pointer to consumer device.
+ *
+ * Returns a valid iio_hw_consumer on success or a ERR_PTR() on failure.
+ */
+struct iio_hw_consumer *iio_hw_consumer_alloc(struct device *dev)
+{
+ struct hw_consumer_buffer *buf;
+ struct iio_hw_consumer *hwc;
+ struct iio_channel *chan;
+ int ret;
+
+ hwc = kzalloc(sizeof(*hwc), GFP_KERNEL);
+ if (!hwc)
+ return ERR_PTR(-ENOMEM);
+
+ INIT_LIST_HEAD(&hwc->buffers);
+
+ hwc->channels = iio_channel_get_all(dev);
+ if (IS_ERR(hwc->channels)) {
+ ret = PTR_ERR(hwc->channels);
+ goto err_free_hwc;
+ }
+
+ chan = &hwc->channels[0];
+ while (chan->indio_dev) {
+ buf = iio_hw_consumer_get_buffer(hwc, chan->indio_dev);
+ if (!buf) {
+ ret = -ENOMEM;
+ goto err_put_buffers;
+ }
+ set_bit(chan->channel->scan_index, buf->buffer.scan_mask);
+ chan++;
+ }
+
+ return hwc;
+
+err_put_buffers:
+ list_for_each_entry(buf, &hwc->buffers, head)
+ iio_buffer_put(&buf->buffer);
+ iio_channel_release_all(hwc->channels);
+err_free_hwc:
+ kfree(hwc);
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(iio_hw_consumer_alloc);
+
+/**
+ * iio_hw_consumer_free() - Free IIO hardware consumer
+ * @hwc: hw consumer to free.
+ */
+void iio_hw_consumer_free(struct iio_hw_consumer *hwc)
+{
+ struct hw_consumer_buffer *buf, *n;
+
+ iio_channel_release_all(hwc->channels);
+ list_for_each_entry_safe(buf, n, &hwc->buffers, head)
+ iio_buffer_put(&buf->buffer);
+ kfree(hwc);
+}
+EXPORT_SYMBOL_GPL(iio_hw_consumer_free);
+
+/**
+ * iio_hw_consumer_enable() - Enable IIO hardware consumer
+ * @hwc: iio_hw_consumer to enable.
+ *
+ * Returns 0 on success.
+ */
+int iio_hw_consumer_enable(struct iio_hw_consumer *hwc)
+{
+ struct hw_consumer_buffer *buf;
+ int ret;
+
+ list_for_each_entry(buf, &hwc->buffers, head) {
+ ret = iio_update_buffers(buf->indio_dev, &buf->buffer, NULL);
+ if (ret)
+ goto err_disable_buffers;
+ }
+
+ return 0;
+
+err_disable_buffers:
+ list_for_each_entry_continue_reverse(buf, &hwc->buffers, head)
+ iio_update_buffers(buf->indio_dev, NULL, &buf->buffer);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(iio_hw_consumer_enable);
+
+/**
+ * iio_hw_consumer_disable() - Disable IIO hardware consumer
+ * @hwc: iio_hw_consumer to disable.
+ */
+void iio_hw_consumer_disable(struct iio_hw_consumer *hwc)
+{
+ struct hw_consumer_buffer *buf;
+
+ list_for_each_entry(buf, &hwc->buffers, head)
+ iio_update_buffers(buf->indio_dev, NULL, &buf->buffer);
+}
+EXPORT_SYMBOL_GPL(iio_hw_consumer_disable);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Hardware consumer buffer the IIO framework");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/iio/hw-consumer.h b/include/linux/iio/hw-consumer.h
new file mode 100644
index 0000000..db8c00b
--- /dev/null
+++ b/include/linux/iio/hw-consumer.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Industrial I/O in kernel hardware consumer interface
+ *
+ * Copyright 2017 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ */
+
+#ifndef LINUX_IIO_HW_CONSUMER_H
+#define LINUX_IIO_HW_CONSUMER_H
+
+struct iio_hw_consumer;
+
+struct iio_hw_consumer *iio_hw_consumer_alloc(struct device *dev);
+void iio_hw_consumer_free(struct iio_hw_consumer *hwc);
+int iio_hw_consumer_enable(struct iio_hw_consumer *hwc);
+void iio_hw_consumer_disable(struct iio_hw_consumer *hwc);
+
+#endif
--
2.7.4
^ permalink raw reply related
* [PATCH v7 00/13] Add STM32 DFSDM support
From: Arnaud Pouliquen @ 2017-12-08 14:49 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
Here is a new version integrating last comments
Main deltas V7 vs V6:
- Replaces the custom license information text with the appropriate
SPDX identifier.
- Few fixes in sound/soc/stm/stm32_adfsdm.c and stm32-dfsdm-core.c.
- Add missing #interrupt-cells in binding examples.
- Integrate last Jonathan's comments.
Main deltas V6 vs V5:
- Fix warning reported by kbuild test in :
include/linux/iio/consumer.h
sound/soc/stm/stm32_adfsdm.c
Main deltas V5 vs V4:
- Integrate ASOC DAI as a subnode of the DFSDM.
- Add in kernel consumer interface to allow to manipulate attribute.
Regards,
Arnaud
Arnaud Pouliquen (12):
docs: driver-api: add iio hw consumer section
IIO: hw_consumer: add devm_iio_hw_consumer_alloc
IIO: inkern: API for manipulating channel attributes
IIO: Add DT bindings for sigma delta adc modulator
IIO: ADC: add sigma delta modulator support
IIO: add DT bindings for stm32 DFSDM filter
IIO: ADC: add stm32 DFSDM core support
IIO: ADC: add STM32 DFSDM sigma delta ADC support
IIO: ADC: add stm32 DFSDM support for PDM microphone
IIO: consumer: allow to set buffer sizes
ASoC: add bindings for stm32 DFSDM filter
ASoC: stm32: add DFSDM DAI support
Lars-Peter Clausen (1):
iio: Add hardware consumer buffer support
.../ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 | 16 +
.../bindings/iio/adc/sigma-delta-modulator.txt | 13 +
.../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 128 ++
.../devicetree/bindings/sound/st,stm32-adfsdm.txt | 63 +
Documentation/driver-api/iio/hw-consumer.rst | 51 +
Documentation/driver-api/iio/index.rst | 1 +
drivers/iio/adc/Kconfig | 37 +
drivers/iio/adc/Makefile | 3 +
drivers/iio/adc/sd_adc_modulator.c | 68 ++
drivers/iio/adc/stm32-dfsdm-adc.c | 1220 ++++++++++++++++++++
drivers/iio/adc/stm32-dfsdm-core.c | 309 +++++
drivers/iio/adc/stm32-dfsdm.h | 310 +++++
drivers/iio/buffer/Kconfig | 10 +
drivers/iio/buffer/Makefile | 1 +
drivers/iio/buffer/industrialio-buffer-cb.c | 11 +
drivers/iio/buffer/industrialio-hw-consumer.c | 247 ++++
drivers/iio/inkern.c | 18 +-
include/linux/iio/adc/stm32-dfsdm-adc.h | 18 +
include/linux/iio/consumer.h | 37 +
include/linux/iio/hw-consumer.h | 21 +
include/linux/iio/iio.h | 28 -
include/linux/iio/types.h | 28 +
sound/soc/stm/Kconfig | 11 +
sound/soc/stm/Makefile | 3 +
sound/soc/stm/stm32_adfsdm.c | 351 ++++++
25 files changed, 2970 insertions(+), 33 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32
create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt
create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt
create mode 100644 Documentation/driver-api/iio/hw-consumer.rst
create mode 100644 drivers/iio/adc/sd_adc_modulator.c
create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c
create mode 100644 drivers/iio/adc/stm32-dfsdm-core.c
create mode 100644 drivers/iio/adc/stm32-dfsdm.h
create mode 100644 drivers/iio/buffer/industrialio-hw-consumer.c
create mode 100644 include/linux/iio/adc/stm32-dfsdm-adc.h
create mode 100644 include/linux/iio/hw-consumer.h
create mode 100644 sound/soc/stm/stm32_adfsdm.c
--
2.7.4
^ permalink raw reply
* [PATCH V7 0/7] dmaengine: qcom_hidma: add support for bugfixed HW
From: Sinan Kaya @ 2017-12-08 14:44 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CAJZ5v0g8v3mwCZOCXHsy_0iA+0RzFFhBxfo4f_cEv5QVLEccsA@mail.gmail.com>
On 12/8/2017 8:48 AM, Rafael J. Wysocki wrote:
> The series is fine by me, by how do you want to route it?
Probably through the DMA engine route as it has pieces that didn't get any
review from Vinod yet.
Vinod,
Do you have any preference?
Sinan
--
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply
* [PATCH 0/6] ARM: stm32: add initial STM32MPU support
From: Neil Armstrong @ 2017-12-08 14:41 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512742277-28205-1-git-send-email-ludovic.Barre@st.com>
On 08/12/2017 15:11, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@st.com>
>
> This patch series extends the existing STM32 microcontrollers (MCUs)
> family to microprocessors (MPUs). The MPU platform (based on
> Arm Cortex-A) is a continuation of the MCU one (based on Arm
> Cortex-M) in that it shares a wide number of hardware blocks.
>
> Ludovic Barre (6):
> ARM: stm32: prepare stm32 family to welcome armv7 architecture
> ARM: stm32: add initial support for STM32MP157
> pinctrl: stm32: Add STM32MP157 MPU support
> ARM: configs: multi_v7: add stm32 support
> ARM: dts: stm32: add stm32mp157c initial support
> ARM: dts: stm32: add initial support of stm32mp157c eval board
>
> Documentation/arm/stm32/overview.txt | 21 +-
> Documentation/arm/stm32/stm32mp157-overview.txt | 12 +
> Documentation/devicetree/bindings/arm/stm32.txt | 1 +
> .../bindings/pinctrl/st,stm32-pinctrl.txt | 2 +
> arch/arm/boot/dts/Makefile | 5 +-
> arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 185 ++
> arch/arm/boot/dts/stm32mp157c-ed1.dts | 29 +
> arch/arm/boot/dts/stm32mp157c-ev1.dts | 19 +
> arch/arm/boot/dts/stm32mp157c.dtsi | 139 ++
> arch/arm/configs/multi_v7_defconfig | 2 +
> arch/arm/mach-stm32/Kconfig | 48 +-
> arch/arm/mach-stm32/Makefile | 3 +-
> arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} | 0
> arch/arm/mach-stm32/board-mpu-dt.c | 16 +
> drivers/pinctrl/stm32/Kconfig | 6 +
> drivers/pinctrl/stm32/Makefile | 1 +
> drivers/pinctrl/stm32/pinctrl-stm32mp157.c | 2188 ++++++++++++++++++++
> 17 files changed, 2656 insertions(+), 21 deletions(-)
> create mode 100644 Documentation/arm/stm32/stm32mp157-overview.txt
> create mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1.dts
> create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1.dts
> create mode 100644 arch/arm/boot/dts/stm32mp157c.dtsi
> rename arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} (100%)
> create mode 100644 arch/arm/mach-stm32/board-mpu-dt.c
> create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32mp157.c
>
Hi Ludovic,
This is great news !
But I couldn't find any announcement on ST ?
I'm curious, but which GPU will be embedded ?
The serie looks great, I don't have more comments on this.
Neil
^ permalink raw reply
* [PATCH V6 4/7] OF: properties: Implement get_match_data() callback
From: Sinan Kaya @ 2017-12-08 14:40 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <6a47c4f6-096e-626d-6761-5f88a07609a7@codeaurora.org>
On 12/8/2017 9:33 AM, Sinan Kaya wrote:
> On 12/8/2017 4:11 AM, Lothar Wa?mann wrote:
>>> While implementing the ACPI piece, I have to convert an unsigned long to
>>> (const void *) in ACPI code so that the APIs are compatible.
>>>
>> Just one more remark: Do you need write access to the data the pointer
>> returned by device_get_match_data() or of_fwnode_get_match_data()
>> points to?
>> If not, the return type of those functions should be 'const void *'.
>
> Yes, the only reason driver is trying to obtain this data pointer is to modify
> members of it. I did a quick test with your suggestion.
I guess I should soften my statement here. I look at examples, they seem to be read.
Even for my HIDMA case:
static const struct of_device_id hidma_match[] = {
{.compatible = "qcom,hidma-1.0",},
{.compatible = "qcom,hidma-1.1", .data = (void *)(HIDMA_MSI_CAP),},
{.compatible = "qcom,hidma-1.2",
.data = (void *)(HIDMA_MSI_CAP | HIDMA_IDENTITY_CAP),},
{},
};
I can change the return type to (const void*) if Rob, Rafael and Sakari agrees.
I didn't really like converting a long to const void*. That's my personal opinion.
>
> test.c: In function ?main?:
> test.c:15:2: error: assignment of member ?m? in read-only object
> t->m = 3;
> ^
>
> struct test
> {
> int m;
> };
>
> int main(void)
> {
> const void *ptr;
> unsigned long l =4;
> const struct test *t;
>
> ptr = (const void *)l;
>
> t = ptr;
> t->m = 3;
> }
>
>
>
--
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply
* [PATCH V6 4/7] OF: properties: Implement get_match_data() callback
From: Sinan Kaya @ 2017-12-08 14:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171208101142.1ea9bc13@karo-electronics.de>
On 12/8/2017 4:11 AM, Lothar Wa?mann wrote:
>> While implementing the ACPI piece, I have to convert an unsigned long to
>> (const void *) in ACPI code so that the APIs are compatible.
>>
> Just one more remark: Do you need write access to the data the pointer
> returned by device_get_match_data() or of_fwnode_get_match_data()
> points to?
> If not, the return type of those functions should be 'const void *'.
Yes, the only reason driver is trying to obtain this data pointer is to modify
members of it. I did a quick test with your suggestion.
test.c: In function ?main?:
test.c:15:2: error: assignment of member ?m? in read-only object
t->m = 3;
^
struct test
{
int m;
};
int main(void)
{
const void *ptr;
unsigned long l =4;
const struct test *t;
ptr = (const void *)l;
t = ptr;
t->m = 3;
}
--
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply
* [PATCH v4 4/8] arm: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource
From: Keerthy @ 2017-12-08 14:31 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <996847a8-d927-638b-3eee-de496d21fe65@ti.com>
On Friday 08 December 2017 09:25 AM, Keerthy wrote:
>
>
> On Thursday 07 December 2017 04:24 PM, Daniel Lezcano wrote:
>> On 01/12/2017 06:16, Keerthy wrote:
>>> Move the dmtimer driver out of plat-omap to clocksource.
>>> So that non-omap devices also could use this.
>>>
>>> No Code changes done to the driver file.
>>>
>>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>>> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
>>> ---
>>>
>>> Changes in v3:
>>>
>>> * Added Sebastian's Reviewed-by.
>>>
>>> Changes in v2:
>>>
>>> * No code changes in this v2 version. Only enhanced patch
>>> statistics for renames.
>>>
>>> arch/arm/plat-omap/Kconfig | 6 ------
>>> arch/arm/plat-omap/Makefile | 1 -
>>> drivers/clocksource/Kconfig | 6 ++++++
>>> drivers/clocksource/Makefile | 1 +
>>> {arch/arm/plat-omap => drivers/clocksource}/dmtimer.c | 0
>>> 5 files changed, 7 insertions(+), 7 deletions(-)
>>> rename {arch/arm/plat-omap => drivers/clocksource}/dmtimer.c (100%)
>>
>> Take the opportunity to rename it timer-dm.c
>
> okay.
>
>>
>>> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
>>> index 7276afe..afc1a1d 100644
>>> --- a/arch/arm/plat-omap/Kconfig
>>> +++ b/arch/arm/plat-omap/Kconfig
>>> @@ -106,12 +106,6 @@ config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
>>> help
>>> PPA routine service ID for setting L2 auxiliary control register.
>>>
>>> -config OMAP_DM_TIMER
>>> - bool "Use dual-mode timer"
>>> - depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
>>> - help
>>> - Select this option if you want to use OMAP Dual-Mode timers.
>>> -
>>> config OMAP_SERIAL_WAKE
>>> bool "Enable wake-up events for serial ports"
>>> depends on ARCH_OMAP1 && OMAP_MUX
>>> diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
>>> index 47e1867..7215ada 100644
>>> --- a/arch/arm/plat-omap/Makefile
>>> +++ b/arch/arm/plat-omap/Makefile
>>> @@ -9,5 +9,4 @@ obj-y := sram.o dma.o counter_32k.o
>>>
>>> # omap_device support (OMAP2+ only at the moment)
>>>
>>> -obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
>>> obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
>>> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
>>> index c729a88..4da66cf 100644
>>> --- a/drivers/clocksource/Kconfig
>>> +++ b/drivers/clocksource/Kconfig
>>> @@ -46,6 +46,12 @@ config DIGICOLOR_TIMER
>>> help
>>> Enables the support for the digicolor timer driver.
>>>
>>> +config OMAP_DM_TIMER
>>> + bool "Use dual-mode timer"
>>> + depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
>>> + help
>>> + Select this option if you want to use Dual-Mode timers.
>>> +
>>
>> So in the clocksource directory the rule is the following:
>>
>> The config option is silent except if COMPILE_TEST is set.
>>
>> It is the Kconfig's platform which select the driver so there is no deps
>> on the ARCH.
>
> Okay understood.
Tony,
The driver requirements force me to remove all ARCH specific #ifdef in
Patch #2. I will reduce that patch to a comment.
Hope that is okay.
Regards,
Keerthy
>
>>
>> config OMAP_DM_TIMER
>> bool "Use dual-mode timer" if COMPILE_TEST
>> help
>> Select this option if you want to use Dual-Mode timers.
>>
>> Here you will have to make sure the driver compiles on x86.
>
> Okay. I will check that in my next version.
>
> Thanks for reviewing!
>
>>
>>> config DW_APB_TIMER
>>> bool "DW APB timer driver" if COMPILE_TEST
>>> help
>>> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
>>> index 72711f1..b077076 100644
>>> --- a/drivers/clocksource/Makefile
>>> +++ b/drivers/clocksource/Makefile
>>> @@ -16,6 +16,7 @@ obj-$(CONFIG_EM_TIMER_STI) += em_sti.o
>>> obj-$(CONFIG_CLKBLD_I8253) += i8253.o
>>> obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
>>> obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o
>>> +obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
>>> obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
>>> obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
>>> obj-$(CONFIG_FTTMR010_TIMER) += timer-fttmr010.o
>>> diff --git a/arch/arm/plat-omap/dmtimer.c b/drivers/clocksource/dmtimer.c
>>> similarity index 100%
>>> rename from arch/arm/plat-omap/dmtimer.c
>>> rename to drivers/clocksource/dmtimer.c
>>>
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply
* [PATCH] ASoC: atmel-classd: select correct Kconfig symbol
From: Alexandre Belloni @ 2017-12-08 14:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171205220759.GL21780@piout.net>
On 05/12/2017 at 23:07:59 +0100, Alexandre Belloni wrote:
> On 05/12/2017 at 14:28:28 +0100, Arnd Bergmann wrote:
> > On Tue, Dec 5, 2017 at 1:47 PM, Alexandre Belloni
> > <alexandre.belloni@free-electrons.com> wrote:
> > > On 05/12/2017 at 12:13:41 +0100, Arnd Bergmann wrote:
> > >
> > > Ok, does that solve both randconfigs?
> > >
> > > diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
> > > index 4a56f3dfba51..dcee145dd179 100644
> > > --- a/sound/soc/atmel/Kconfig
> > > +++ b/sound/soc/atmel/Kconfig
> > > @@ -64,7 +64,7 @@ config SND_AT91_SOC_SAM9X5_WM8731
> > > config SND_ATMEL_SOC_CLASSD
> > > tristate "Atmel ASoC driver for boards using CLASSD"
> > > depends on ARCH_AT91 || COMPILE_TEST
> > > - select SND_ATMEL_SOC_DMA
> > > + select SND_SOC_GENERIC_DMAENGINE_PCM
> > > select REGMAP_MMIO
> > > help
> > > Say Y if you want to add support for Atmel ASoC driver for boards using
> >
> > Yes, that works as well and looks reliable. I've sent another
> > follow-up now, working on the
> > assumption that we actually need SND_ATMEL_SOC_DMA.
> >
> > Both patches make it build, but obviously only one of the two is
> > actually correct. I assume you know what you are doing, so if
> > you want to send your patch with a proper changelog, please add
> > my
> >
> > Tested-by: Arnd Bergmann <arnd@arndb.de>
> >
>
> Ok, I'll test on a real board before the end of the week (I need to find
> a speaker) and I'll send a proper patch.
>
So I've tested and this works properly, I've sent the patch (as you
probably have seen).
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply
* [PATCH 0/2] acpi, x86: Add SPCR table support
From: Prarit Bhargava @ 2017-12-08 14:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171208062925.64ov23u7oxmdfzyk@gmail.com>
On 12/08/2017 01:29 AM, Ingo Molnar wrote:
>
> * Prarit Bhargava <prarit@redhat.com> wrote:
>
>> The SPCR (Serial Port Console Redirection) Table provides information
>> about the configuration of serial port. This information can be used
>> to configure the early console.
>
> s/about the configuration of serial port
> /about the configuration of the serial port
>
>> SPCR support was added for arm64 and is made available across all arches
>> in this patchset. The first patch adds a weak per-arch configuration function
>> and moves the SPCR code into ACPI. The second patch adds support to x86.
>>
>> The existing behaviour on arm64 is maintained. If the SPCR exists the
>> earlycon and console are automatically configured.
>
> s/arm64
> /ARM64
>
> which is easier to read and it's also the prevalent spelling:
>
> triton:~/tip> for N in $(git grep -ih arm64 arch/arm64/ | sed 's/[[:punct:]]/ /g'); do echo $N | grep -iw arm64; done | sort | uniq -c
> 412 arm64
> 1 Arm64
> 854 ARM64
>
>> The existing default behaviour on x86 is also maintained. If no console or
>> earlycon parameter is defined and the SPCR exists , the serial port is not
>> configured. If the earlycon parameter is used both the early console
>> and the console are configured using the data from the SPCR.
>
> s/exists , the
> /exists, the
>
> But, the logic to not use the SPCR looks confusing to me.
>
> The SPCR is only present if the user has explicitly configured a serial console
> for that machine, either in the firmware, or remotely via IPMI, correct? I.e. SPCR
> will not be spuriously present by default on systems that have a serial console
> but the user never expressed any interest for them, right?
If I disable "Serial Port Console Debug" in my BIOS I still see the SPCR configured:
[root at prarit-lab ~]# dmesg | grep SPCR
[ 0.000000] ACPI: SPCR 0x0000000069031000 000050 (v01
00000000 00000000)
AFAICT the SPCR is always enabled on some systems.
>
> If so then we should pick up that serial console configuration and activate it,
> regardless of any kernel boot options!
I'm worried about someone who doesn't want a console on ttyS0 suddenly ending up
with one. The SPCR could contain incorrect data, etc.
I originally wanted this on by default, but the chances of breaking someone's
setup seems significant doesn't it? Maybe I'm being too cautious. Anyone else
want to weigh in? I'm not ignoring your idea Ingo, I'm just worried about being
yelled at by a user :) because I broke their default console setup.
P.
^ permalink raw reply
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
From: Jerome Brunet @ 2017-12-08 14:27 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <060fab5b-0832-198d-9aab-d986a909c449@amlogic.com>
On Fri, 2017-12-08 at 22:22 +0800, Yixun Lan wrote:
> let's just wait for a few more days, to see if there are more comments
> coming up, then I would fold them together
That's up to you. Keep in mind that rc4 is coming up and I'll need some time
to test/verify the final version
^ permalink raw reply
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
From: Yixun Lan @ 2017-12-08 14:22 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512725587.17256.19.camel@baylibre.com>
On 12/08/17 17:33, Jerome Brunet wrote:
> On Thu, 2017-12-07 at 16:10 -0600, Rob Herring wrote:
>> On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
>>> From: Qiufang Dai <qiufang.dai@amlogic.com>
>>>
>>> Add the required header for the clocks ID dt-bindings
>>> exported from various subsystem in the Meson-AXG SoC.
>>>
>>> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
>>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>>> ---
>>> include/dt-bindings/clock/axg-clkc.h | 71
>>> ++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 71 insertions(+)
>>> create mode 100644 include/dt-bindings/clock/axg-clkc.h
>>
>> Please add acks when posting new versions.
>>
>> Rob
>
> Yixun, please be consistent about this. Maintainers are not going to dig
> through your previous revision to collect Tags
>
> I believe Neil acked patch 3, didn't he ?
>
> Please resend your series with the Tags collected
sorry, I missed Neil's ACK for the pacth [3/4]
let's just wait for a few more days, to see if there are more comments
coming up, then I would fold them together
> If not already done, please make sure patches 1-3 apply on top of rc1 and patch
> 4 on Kevin's dt64 branch.
>
the above is already base on -rc2, and patch 4 can apply to kevin's dt64
cleanly
> Thanks
> Jerome
>
> .
>
^ permalink raw reply
* [PATCH v9 4/6] clocksource: stm32: add clocksource support
From: Benjamin Gaignard @ 2017-12-08 14:19 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <810270c4-c6b4-ee05-2481-ced52f7d2685@linaro.org>
2017-12-08 15:08 GMT+01:00 Daniel Lezcano <daniel.lezcano@linaro.org>:
> On 08/12/2017 15:04, Benjamin Gaignard wrote:
>> 2017-12-08 14:46 GMT+01:00 Daniel Lezcano <daniel.lezcano@linaro.org>:
>>> On 08/12/2017 12:32, Benjamin Gaignard wrote:
>>>> The stm32 timer hardware is currently only used as a clock event device,
>>>> but it can be utilized as a clocksource as well.
>>>>
>>>> Implement this by enabling the free running counter in the hardware block
>>>> and converting the clock event part from a count down event timer to a
>>>> comparator based timer.
>>>
>>>
>>> Split this patch in two:
>>> - periodic support
>>> - clocksource support
>>
>> No because the way of implementing periodic support depend of how clocksource
>> part is implemented on the hardware.
>> I don't want to code functions that I will completely remove just after
>
> Sorry, I don't get it. Can you elaborate please ?
To add clocksource support I use the counter part of the hardware
which was before
used for clockevent and make clockevent use the comparator instead.
So implementing periodic on counter side of the hardware is a waste of
time because
I will to remove right after
>
>
> --
> <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs
>
> Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog
>
^ permalink raw reply
* [PATCH] ASoC: atmel-classd: select correct Kconfig symbol
From: Alexandre Belloni @ 2017-12-08 14:18 UTC (permalink / raw)
To: linux-arm-kernel
SND_ATMEL_SOC_CLASSD selects SND_ATMEL_SOC_DMA but the driver itself
handles its own DMA operations and doesn't need anything from
atmel-pcm-dma.c or atmel_ssc_dai.c.
Replace SND_ATMEL_SOC_DMA by SND_SOC_GENERIC_DMAENGINE_PCM which is the
only one actually required.
This may end up in a configuration leading to a link error:
sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio':
atmel_ssc_dai.c:(.text+0x79c): undefined reference to `atmel_pcm_dma_platform_register'
atmel_ssc_dai.c:(.text+0x79c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `atmel_pcm_dma_platform_register'
sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_put_audio':
atmel_ssc_dai.c:(.text+0xf24): undefined reference to `atmel_pcm_dma_platform_unregister'
atmel_ssc_dai.c:(.text+0xf24): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `atmel_pcm_dma_platform_unregister'
Tested on sama5d2 xplained with the following configuration
where nothing selects SND_ATMEL_SOC_DMA:
CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_ATMEL_SOC_CLASSD=y
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Fixes: e0a25b6d1862 ("ASoC: atmel-classd: add the Audio Class D Amplifier")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
sound/soc/atmel/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index 4a56f3dfba51..dcee145dd179 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -64,7 +64,7 @@ config SND_AT91_SOC_SAM9X5_WM8731
config SND_ATMEL_SOC_CLASSD
tristate "Atmel ASoC driver for boards using CLASSD"
depends on ARCH_AT91 || COMPILE_TEST
- select SND_ATMEL_SOC_DMA
+ select SND_SOC_GENERIC_DMAENGINE_PCM
select REGMAP_MMIO
help
Say Y if you want to add support for Atmel ASoC driver for boards using
--
2.15.1
^ permalink raw reply related
* [PATCH 6/6] ARM: dts: stm32: add initial support of stm32mp157c eval board
From: Ludovic Barre @ 2017-12-08 14:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512742277-28205-1-git-send-email-ludovic.Barre@st.com>
From: Ludovic Barre <ludovic.barre@st.com>
Add support of stm32mp157c evaluation board (part number: STM32MP157C-EV1)
split in 2 elements:
-Daughter board (part number: STM32MP157C-ED1)
which includes CPU, memory and power supply
-Mother board (part number: STM32MP157C-EM1)
which includes external peripherals (like display, camera,...)
and extension connectors.
The daughter board can run alone, this is why the device tree files
are split in two layers, for the complete evaluation board (ev1)
and for the daughter board alone (ed1).
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
---
arch/arm/boot/dts/Makefile | 5 ++++-
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 13 +++++++++++++
arch/arm/boot/dts/stm32mp157c-ed1.dts | 29 +++++++++++++++++++++++++++++
arch/arm/boot/dts/stm32mp157c-ev1.dts | 19 +++++++++++++++++++
4 files changed, 65 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9..ddfa3b3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -839,7 +839,7 @@ dtb-$(CONFIG_ARCH_STI) += \
stih410-b2120.dtb \
stih410-b2260.dtb \
stih418-b2199.dtb
-dtb-$(CONFIG_ARCH_STM32)+= \
+dtb-$(CONFIG_ARCH_STM32_MCU) += \
stm32f429-disco.dtb \
stm32f469-disco.dtb \
stm32f746-disco.dtb \
@@ -848,6 +848,9 @@ dtb-$(CONFIG_ARCH_STM32)+= \
stm32746g-eval.dtb \
stm32h743i-eval.dtb \
stm32h743i-disco.dtb
+dtb-$(CONFIG_ARCH_STM32_MPU) += \
+ stm32mp157c-ed1.dtb \
+ stm32mp157c-ev1.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 440276a..7ac65f4 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -145,6 +145,19 @@
ngpios = <8>;
gpio-ranges = <&pinctrl 0 160 8>;
};
+
+ uart4_pins_a: uart4 at 0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
};
pinctrl_z: pin-controller-z {
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
new file mode 100644
index 0000000..f6a2618
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157c.dtsi"
+#include "stm32mp157-pinctrl.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP157C eval daughter";
+ compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
+
+ chosen {
+ bootargs = "earlyprintk console=ttySTM3,115200 root=/dev/ram";
+ stdout-path = "serial3:115200n8";
+ };
+
+ memory {
+ reg = <0xC0000000 0x4000000>;
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
new file mode 100644
index 0000000..a310703
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+/dts-v1/;
+
+#include "stm32mp157c-ed1.dts"
+
+/ {
+ model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
+ compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
+
+ chosen {
+ bootargs = "earlyprintk console=ttySTM3,115200 root=/dev/ram";
+ stdout-path = "serial3:115200n8";
+ };
+};
+
--
2.7.4
^ permalink raw reply related
* [PATCH 5/6] ARM: dts: stm32: add stm32mp157c initial support
From: Ludovic Barre @ 2017-12-08 14:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512742277-28205-1-git-send-email-ludovic.Barre@st.com>
From: Ludovic Barre <ludovic.barre@st.com>
Add stm32mp157c initial support with:
-Dual Cortex-A7
-Arm psci, timer, gic
-Pinctrl
-Uart
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 172 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/stm32mp157c.dtsi | 139 ++++++++++++++++++++++++
2 files changed, 311 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp157c.dtsi
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
new file mode 100644
index 0000000..440276a
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -0,0 +1,172 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+/ {
+ soc {
+ pinctrl: pin-controller {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-pinctrl";
+ ranges = <0 0x50002000 0xa400>;
+ pins-are-numbered;
+
+ gpioa: gpio at 50002000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOA";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio at 50003000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOB";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio at 50004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOC";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio at 50005000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOD";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio at 50006000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOE";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio at 50007000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOF";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio at 50008000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOG";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio at 50009000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOH";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio at 5000a000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOI";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio at 5000b000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x9000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOJ";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio at 5000c000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0xa000 0x400>;
+ clocks = <&clk_pll3_p>;
+ st,bank-name = "GPIOK";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+ };
+
+ pinctrl_z: pin-controller-z {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-z-pinctrl";
+ ranges = <0 0x54004000 0x400>;
+ pins-are-numbered;
+ status = "disabled";
+
+ gpioz: gpio at 54004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x400>;
+ clocks = <&clk_pll2_p>;
+ st,bank-name = "GPIOZ";
+ st,bank-ioport = <11>;
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
new file mode 100644
index 0000000..93dbcac
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu1: cpu at 1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci";
+ method = "smc";
+ cpu_off = <0x84000002>;
+ cpu_on = <0x84000003>;
+ };
+
+ aliases {
+ gpio0 = &gpioa;
+ gpio1 = &gpiob;
+ gpio2 = &gpioc;
+ gpio3 = &gpiod;
+ gpio4 = &gpioe;
+ gpio5 = &gpiof;
+ gpio6 = &gpiog;
+ gpio7 = &gpioh;
+ gpio8 = &gpioi;
+ gpio9 = &gpioj;
+ gpio10 = &gpiok;
+ serial3 = &uart4;
+ };
+
+ intc: interrupt-controller at a0021000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xa0021000 0x1000>,
+ <0xa0022000 0x2000>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&intc>;
+ };
+
+ clocks {
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ clk_pll_per: clk-pll-per {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_hsi: clk-hsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_lse: clk-lse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clk_lsi: clk-lsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
+
+ clk_csi: clk-csi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <4000000>;
+ };
+
+ clk_pclk1: clk-pclk1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <86000000>;
+ };
+
+ clk_pll3_p: clk-pll3_p {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <172000000>;
+ };
+
+ clk_pll2_p: clk-pll2_p {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <264000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+
+ uart4: serial at 40010000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40010000 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_NONE>;
+ clocks = <&clk_pclk1>;
+ status = "disabled";
+ };
+ };
+};
--
2.7.4
^ permalink raw reply related
* [PATCH 4/6] ARM: configs: multi_v7: add stm32 support
From: Ludovic Barre @ 2017-12-08 14:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512742277-28205-1-git-send-email-ludovic.Barre@st.com>
From: Ludovic Barre <ludovic.barre@st.com>
This patch adds stm32 support to multi_v7_defconfig
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
arch/arm/configs/multi_v7_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 61509c4..4b70ec7 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -81,6 +81,7 @@ CONFIG_ARCH_SPEAR13XX=y
CONFIG_MACH_SPEAR1310=y
CONFIG_MACH_SPEAR1340=y
CONFIG_ARCH_STI=y
+CONFIG_ARCH_STM32=y
CONFIG_ARCH_EXYNOS=y
CONFIG_EXYNOS5420_MCPM=y
CONFIG_ARCH_RENESAS=y
@@ -346,6 +347,7 @@ CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
CONFIG_SERIAL_ST_ASC=y
CONFIG_SERIAL_ST_ASC_CONSOLE=y
+CONFIG_SERIAL_STM32=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_I2C_CHARDEV=y
--
2.7.4
^ permalink raw reply related
* [PATCH 3/6] pinctrl: stm32: Add STM32MP157 MPU support
From: Ludovic Barre @ 2017-12-08 14:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512742277-28205-1-git-send-email-ludovic.Barre@st.com>
From: Ludovic Barre <ludovic.barre@st.com>
This driver consists of 2 controllers due to a hole in mapping:
-1 controller for GPIO bankA to K.
-1 controller for GPIO bankZ.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
.../bindings/pinctrl/st,stm32-pinctrl.txt | 2 +
drivers/pinctrl/stm32/Kconfig | 6 +
drivers/pinctrl/stm32/Makefile | 1 +
drivers/pinctrl/stm32/pinctrl-stm32mp157.c | 2188 ++++++++++++++++++++
4 files changed, 2197 insertions(+)
create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32mp157.c
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
index 58c2a4c..2c46f30 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
@@ -12,6 +12,8 @@ Required properies:
"st,stm32f469-pinctrl"
"st,stm32f746-pinctrl"
"st,stm32h743-pinctrl"
+ "st,stm32mp157-pinctrl"
+ "st,stm32mp157-z-pinctrl"
- #address-cells: The value of this property must be 1
- #size-cells : The value of this property must be 1
- ranges : defines mapping between pin controller node (parent) to
diff --git a/drivers/pinctrl/stm32/Kconfig b/drivers/pinctrl/stm32/Kconfig
index 7e1fe39..a6d045d 100644
--- a/drivers/pinctrl/stm32/Kconfig
+++ b/drivers/pinctrl/stm32/Kconfig
@@ -32,4 +32,10 @@ config PINCTRL_STM32H743
depends on OF
default MACH_STM32H743
select PINCTRL_STM32
+
+config PINCTRL_STM32MP157
+ bool "STMicroelectronics STM32MP157 pin control" if COMPILE_TEST && !MACH_STM32MP157
+ depends on OF
+ default MACH_STM32MP157
+ select PINCTRL_STM32
endif
diff --git a/drivers/pinctrl/stm32/Makefile b/drivers/pinctrl/stm32/Makefile
index d13ca35..b52223d 100644
--- a/drivers/pinctrl/stm32/Makefile
+++ b/drivers/pinctrl/stm32/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_PINCTRL_STM32F429) += pinctrl-stm32f429.o
obj-$(CONFIG_PINCTRL_STM32F469) += pinctrl-stm32f469.o
obj-$(CONFIG_PINCTRL_STM32F746) += pinctrl-stm32f746.o
obj-$(CONFIG_PINCTRL_STM32H743) += pinctrl-stm32h743.o
+obj-$(CONFIG_PINCTRL_STM32MP157) += pinctrl-stm32mp157.o
diff --git a/drivers/pinctrl/stm32/pinctrl-stm32mp157.c b/drivers/pinctrl/stm32/pinctrl-stm32mp157.c
new file mode 100644
index 0000000..7c7d628
--- /dev/null
+++ b/drivers/pinctrl/stm32/pinctrl-stm32mp157.c
@@ -0,0 +1,2188 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-stm32.h"
+
+static const struct stm32_desc_pin stm32mp157_pins[] = {
+ STM32_PIN(
+ PINCTRL_PIN(0, "PA0"),
+ STM32_FUNCTION(0, "GPIOA0"),
+ STM32_FUNCTION(2, "TIM2_CH1 TIM2_ETR"),
+ STM32_FUNCTION(3, "TIM5_CH1"),
+ STM32_FUNCTION(4, "TIM8_ETR"),
+ STM32_FUNCTION(5, "TIM15_BKIN"),
+ STM32_FUNCTION(8, "USART2_CTS_NSS USART_BOOT2_CTS_NSS"),
+ STM32_FUNCTION(9, "UART4_TX"),
+ STM32_FUNCTION(10, "SDMMC2_CMD"),
+ STM32_FUNCTION(11, "SAI2_SD_B"),
+ STM32_FUNCTION(12, "ETH_GMII_CRS ETH_MII_CRS"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(1, "PA1"),
+ STM32_FUNCTION(0, "GPIOA1"),
+ STM32_FUNCTION(1, "ETH_CLK"),
+ STM32_FUNCTION(2, "TIM2_CH2"),
+ STM32_FUNCTION(3, "TIM5_CH2"),
+ STM32_FUNCTION(4, "LPTIM3_OUT"),
+ STM32_FUNCTION(5, "TIM15_CH1N"),
+ STM32_FUNCTION(8, "USART2_RTS USART_BOOT2_RTS"),
+ STM32_FUNCTION(9, "UART4_RX"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO3 QUADSPI_BOOTBK1_IO3"),
+ STM32_FUNCTION(11, "SAI2_MCLK_B"),
+ STM32_FUNCTION(12, "ETH_GMII_RX_CLK ETH_MII_RX_CLK ETH_RGMII_RX_CLK ETH_RMII_REF_CLK"),
+ STM32_FUNCTION(15, "LCD_R2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(2, "PA2"),
+ STM32_FUNCTION(0, "GPIOA2"),
+ STM32_FUNCTION(2, "TIM2_CH3"),
+ STM32_FUNCTION(3, "TIM5_CH3"),
+ STM32_FUNCTION(4, "LPTIM4_OUT"),
+ STM32_FUNCTION(5, "TIM15_CH1"),
+ STM32_FUNCTION(8, "USART2_TX USART_BOOT2_TX"),
+ STM32_FUNCTION(9, "SAI2_SCK_B"),
+ STM32_FUNCTION(11, "SDMMC2_D0DIR SDMMC_BOOT2_D0DIR"),
+ STM32_FUNCTION(12, "ETH_MDIO"),
+ STM32_FUNCTION(13, "MDIOS_MDIO"),
+ STM32_FUNCTION(15, "LCD_R1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(3, "PA3"),
+ STM32_FUNCTION(0, "GPIOA3"),
+ STM32_FUNCTION(2, "TIM2_CH4"),
+ STM32_FUNCTION(3, "TIM5_CH4"),
+ STM32_FUNCTION(4, "LPTIM5_OUT"),
+ STM32_FUNCTION(5, "TIM15_CH2"),
+ STM32_FUNCTION(8, "USART2_RX USART_BOOT2_RX"),
+ STM32_FUNCTION(10, "LCD_B2"),
+ STM32_FUNCTION(12, "ETH_GMII_COL ETH_MII_COL"),
+ STM32_FUNCTION(15, "LCD_B5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(4, "PA4"),
+ STM32_FUNCTION(0, "GPIOA4"),
+ STM32_FUNCTION(1, "HDP0"),
+ STM32_FUNCTION(3, "TIM5_ETR"),
+ STM32_FUNCTION(5, "SAI4_D2"),
+ STM32_FUNCTION(6, "SPI1_NSS I2S1_WS"),
+ STM32_FUNCTION(7, "SPI3_NSS I2S3_WS"),
+ STM32_FUNCTION(8, "USART2_CK USART_BOOT2_CK"),
+ STM32_FUNCTION(9, "SPI6_NSS"),
+ STM32_FUNCTION(13, "SAI4_FS_A"),
+ STM32_FUNCTION(14, "DCMI_HSYNC"),
+ STM32_FUNCTION(15, "LCD_VSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(5, "PA5"),
+ STM32_FUNCTION(0, "GPIOA5"),
+ STM32_FUNCTION(2, "TIM2_CH1 TIM2_ETR"),
+ STM32_FUNCTION(4, "TIM8_CH1N"),
+ STM32_FUNCTION(5, "SAI4_CK1"),
+ STM32_FUNCTION(6, "SPI1_SCK I2S1_CK"),
+ STM32_FUNCTION(9, "SPI6_SCK"),
+ STM32_FUNCTION(13, "SAI4_MCLK_A"),
+ STM32_FUNCTION(15, "LCD_R4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(6, "PA6"),
+ STM32_FUNCTION(0, "GPIOA6"),
+ STM32_FUNCTION(2, "TIM1_BKIN"),
+ STM32_FUNCTION(3, "TIM3_CH1"),
+ STM32_FUNCTION(4, "TIM8_BKIN"),
+ STM32_FUNCTION(5, "SAI4_CK2"),
+ STM32_FUNCTION(6, "SPI1_MISO I2S1_SDI"),
+ STM32_FUNCTION(9, "SPI6_MISO"),
+ STM32_FUNCTION(10, "TIM13_CH1"),
+ STM32_FUNCTION(12, "MDIOS_MDC"),
+ STM32_FUNCTION(13, "SAI4_SCK_A"),
+ STM32_FUNCTION(14, "DCMI_PIXCLK"),
+ STM32_FUNCTION(15, "LCD_G2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(7, "PA7"),
+ STM32_FUNCTION(0, "GPIOA7"),
+ STM32_FUNCTION(2, "TIM1_CH1N"),
+ STM32_FUNCTION(3, "TIM3_CH2"),
+ STM32_FUNCTION(4, "TIM8_CH1N"),
+ STM32_FUNCTION(5, "SAI4_D1"),
+ STM32_FUNCTION(6, "SPI1_MOSI I2S1_SDO"),
+ STM32_FUNCTION(9, "SPI6_MOSI"),
+ STM32_FUNCTION(10, "TIM14_CH1"),
+ STM32_FUNCTION(11, "QUADSPI_CLK"),
+ STM32_FUNCTION(12, "ETH_GMII_RX_DV ETH_MII_RX_DV ETH_RGMII_RX_CTL ETH_RMII_CRS_DV"),
+ STM32_FUNCTION(13, "SAI4_SD_A"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(8, "PA8"),
+ STM32_FUNCTION(0, "GPIOA8"),
+ STM32_FUNCTION(1, "MCO1"),
+ STM32_FUNCTION(2, "TIM1_CH1"),
+ STM32_FUNCTION(4, "TIM8_BKIN2"),
+ STM32_FUNCTION(5, "I2C3_SCL"),
+ STM32_FUNCTION(6, "SPI3_MOSI I2S3_SDO"),
+ STM32_FUNCTION(8, "USART1_CK"),
+ STM32_FUNCTION(9, "SDMMC2_CKIN SDMMC_BOOT2_CKIN"),
+ STM32_FUNCTION(10, "SDMMC2_D4 SDMMC_BOOT2_D4"),
+ STM32_FUNCTION(11, "USBO_SOF"),
+ STM32_FUNCTION(13, "SAI4_SD_B"),
+ STM32_FUNCTION(14, "UART7_RX"),
+ STM32_FUNCTION(15, "LCD_R6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(9, "PA9"),
+ STM32_FUNCTION(0, "GPIOA9"),
+ STM32_FUNCTION(2, "TIM1_CH2"),
+ STM32_FUNCTION(5, "I2C3_SMBA"),
+ STM32_FUNCTION(6, "SPI2_SCK I2S2_CK"),
+ STM32_FUNCTION(8, "USART1_TX"),
+ STM32_FUNCTION(9, "SDMMC2_CDIR SDMMC_BOOT2_CDIR"),
+ STM32_FUNCTION(10, "CAN1_RXFD"),
+ STM32_FUNCTION(11, "SDMMC2_D5 SDMMC_BOOT2_D5"),
+ STM32_FUNCTION(14, "DCMI_D0"),
+ STM32_FUNCTION(15, "LCD_R5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(10, "PA10"),
+ STM32_FUNCTION(0, "GPIOA10"),
+ STM32_FUNCTION(2, "TIM1_CH3"),
+ STM32_FUNCTION(6, "SPI3_NSS I2S3_WS"),
+ STM32_FUNCTION(8, "USART1_RX"),
+ STM32_FUNCTION(10, "CAN1_TXFD"),
+ STM32_FUNCTION(12, "MDIOS_MDIO"),
+ STM32_FUNCTION(13, "SAI4_FS_B"),
+ STM32_FUNCTION(14, "DCMI_D1"),
+ STM32_FUNCTION(15, "LCD_B1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(11, "PA11"),
+ STM32_FUNCTION(0, "GPIOA11"),
+ STM32_FUNCTION(2, "TIM1_CH4"),
+ STM32_FUNCTION(3, "I2C6_SCL"),
+ STM32_FUNCTION(5, "I2C5_SCL"),
+ STM32_FUNCTION(6, "SPI2_NSS I2S2_WS"),
+ STM32_FUNCTION(7, "UART4_RX"),
+ STM32_FUNCTION(8, "USART1_CTS_NSS"),
+ STM32_FUNCTION(10, "CAN1_RX"),
+ STM32_FUNCTION(15, "LCD_R4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(12, "PA12"),
+ STM32_FUNCTION(0, "GPIOA12"),
+ STM32_FUNCTION(2, "TIM1_ETR"),
+ STM32_FUNCTION(3, "I2C6_SDA"),
+ STM32_FUNCTION(5, "I2C5_SDA"),
+ STM32_FUNCTION(6, "SPI2_SCK I2S2_CK"),
+ STM32_FUNCTION(7, "UART4_TX"),
+ STM32_FUNCTION(8, "USART1_RTS"),
+ STM32_FUNCTION(9, "SAI2_FS_B"),
+ STM32_FUNCTION(10, "CAN1_TX"),
+ STM32_FUNCTION(15, "LCD_R5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(13, "PA13"),
+ STM32_FUNCTION(0, "GPIOA13"),
+ STM32_FUNCTION(1, "DBTRGO"),
+ STM32_FUNCTION(2, "DBTRGI"),
+ STM32_FUNCTION(3, "MCO1"),
+ STM32_FUNCTION(9, "UART4_TX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(14, "PA14"),
+ STM32_FUNCTION(0, "GPIOA14"),
+ STM32_FUNCTION(1, "DBTRGO"),
+ STM32_FUNCTION(2, "DBTRGI"),
+ STM32_FUNCTION(3, "MCO2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(15, "PA15"),
+ STM32_FUNCTION(0, "GPIOA15"),
+ STM32_FUNCTION(1, "DBTRGI"),
+ STM32_FUNCTION(2, "TIM2_CH1 TIM2_ETR"),
+ STM32_FUNCTION(3, "SAI4_D2"),
+ STM32_FUNCTION(4, "SDMMC1_CDIR"),
+ STM32_FUNCTION(5, "HDMI_CEC"),
+ STM32_FUNCTION(6, "SPI1_NSS I2S1_WS"),
+ STM32_FUNCTION(7, "SPI3_NSS I2S3_WS"),
+ STM32_FUNCTION(8, "SPI6_NSS"),
+ STM32_FUNCTION(9, "UART4_RTS UART_BOOT4_RTS"),
+ STM32_FUNCTION(10, "SDMMC2_D5 SDMMC_BOOT2_D5"),
+ STM32_FUNCTION(11, "SDMMC2_CDIR SDMMC_BOOT2_CDIR"),
+ STM32_FUNCTION(12, "SDMMC1_D5 SDMMC_BOOT1_D5"),
+ STM32_FUNCTION(13, "SAI4_FS_A"),
+ STM32_FUNCTION(14, "UART7_TX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(16, "PB0"),
+ STM32_FUNCTION(0, "GPIOB0"),
+ STM32_FUNCTION(2, "TIM1_CH2N"),
+ STM32_FUNCTION(3, "TIM3_CH3"),
+ STM32_FUNCTION(4, "TIM8_CH2N"),
+ STM32_FUNCTION(7, "DFSDM_CKOUT"),
+ STM32_FUNCTION(9, "UART4_CTS UART_BOOT4_CTS"),
+ STM32_FUNCTION(10, "LCD_R3"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD2 ETH_MII_RXD2 ETH_RGMII_RXD2"),
+ STM32_FUNCTION(13, "MDIOS_MDIO"),
+ STM32_FUNCTION(15, "LCD_G1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(17, "PB1"),
+ STM32_FUNCTION(0, "GPIOB1"),
+ STM32_FUNCTION(2, "TIM1_CH3N"),
+ STM32_FUNCTION(3, "TIM3_CH4"),
+ STM32_FUNCTION(4, "TIM8_CH3N"),
+ STM32_FUNCTION(7, "DFSDM_DATA1"),
+ STM32_FUNCTION(10, "LCD_R6"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD3 ETH_MII_RXD3 ETH_RGMII_RXD3"),
+ STM32_FUNCTION(13, "MDIOS_MDC"),
+ STM32_FUNCTION(15, "LCD_G0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(18, "PB2"),
+ STM32_FUNCTION(0, "GPIOB2"),
+ STM32_FUNCTION(1, "TRACED4"),
+ STM32_FUNCTION(2, "RTC_OUT2"),
+ STM32_FUNCTION(3, "SAI1_D1"),
+ STM32_FUNCTION(4, "DFSDM_CK1"),
+ STM32_FUNCTION(5, "USART1_RX"),
+ STM32_FUNCTION(6, "I2S_CKIN"),
+ STM32_FUNCTION(7, "SAI1_SD_A"),
+ STM32_FUNCTION(8, "SPI3_MOSI I2S3_SDO"),
+ STM32_FUNCTION(9, "UART4_RX UART_BOOT4_RX"),
+ STM32_FUNCTION(10, "QUADSPI_CLK"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(19, "PB3"),
+ STM32_FUNCTION(0, "GPIOB3"),
+ STM32_FUNCTION(1, "TRACED9"),
+ STM32_FUNCTION(2, "TIM2_CH2"),
+ STM32_FUNCTION(5, "SAI4_CK1"),
+ STM32_FUNCTION(6, "SPI1_SCK I2S1_CK"),
+ STM32_FUNCTION(7, "SPI3_SCK I2S3_CK"),
+ STM32_FUNCTION(9, "SPI6_SCK"),
+ STM32_FUNCTION(10, "SDMMC2_D2 SDMMC_BOOT2_D2"),
+ STM32_FUNCTION(13, "SAI4_MCLK_A"),
+ STM32_FUNCTION(14, "UART7_RX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(20, "PB4"),
+ STM32_FUNCTION(0, "GPIOB4"),
+ STM32_FUNCTION(1, "TRACED8"),
+ STM32_FUNCTION(2, "TIM16_BKIN"),
+ STM32_FUNCTION(3, "TIM3_CH1"),
+ STM32_FUNCTION(5, "SAI4_CK2"),
+ STM32_FUNCTION(6, "SPI1_MISO I2S1_SDI"),
+ STM32_FUNCTION(7, "SPI3_MISO I2S3_SDI"),
+ STM32_FUNCTION(8, "SPI2_NSS I2S2_WS"),
+ STM32_FUNCTION(9, "SPI6_MISO"),
+ STM32_FUNCTION(10, "SDMMC2_D3 SDMMC_BOOT2_D3"),
+ STM32_FUNCTION(13, "SAI4_SCK_A"),
+ STM32_FUNCTION(14, "UART7_TX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(21, "PB5"),
+ STM32_FUNCTION(0, "GPIOB5"),
+ STM32_FUNCTION(1, "ETH_CLK"),
+ STM32_FUNCTION(2, "TIM17_BKIN"),
+ STM32_FUNCTION(3, "TIM3_CH2"),
+ STM32_FUNCTION(4, "SAI4_D1"),
+ STM32_FUNCTION(5, "I2C1_SMBA"),
+ STM32_FUNCTION(6, "SPI1_MOSI I2S1_SDO"),
+ STM32_FUNCTION(7, "I2C4_SMBA"),
+ STM32_FUNCTION(8, "SPI3_MOSI I2S3_SDO"),
+ STM32_FUNCTION(9, "SPI6_MOSI"),
+ STM32_FUNCTION(10, "CAN2_RX"),
+ STM32_FUNCTION(11, "SAI4_SD_A"),
+ STM32_FUNCTION(12, "ETH_PPS_OUT"),
+ STM32_FUNCTION(13, "UART5_RX UART_BOOT5_RX"),
+ STM32_FUNCTION(14, "DCMI_D10"),
+ STM32_FUNCTION(15, "LCD_G7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(22, "PB6"),
+ STM32_FUNCTION(0, "GPIOB6"),
+ STM32_FUNCTION(2, "TIM16_CH1N"),
+ STM32_FUNCTION(3, "TIM4_CH1"),
+ STM32_FUNCTION(5, "I2C1_SCL"),
+ STM32_FUNCTION(6, "HDMI_CEC"),
+ STM32_FUNCTION(7, "I2C4_SCL"),
+ STM32_FUNCTION(8, "USART1_TX"),
+ STM32_FUNCTION(10, "CAN2_TX"),
+ STM32_FUNCTION(11, "QUADSPI_BK1_NCS QUADSPI_BOOTBK1_NCS"),
+ STM32_FUNCTION(12, "DFSDM_DATA5"),
+ STM32_FUNCTION(13, "UART5_TX"),
+ STM32_FUNCTION(14, "DCMI_D5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(23, "PB7"),
+ STM32_FUNCTION(0, "GPIOB7"),
+ STM32_FUNCTION(2, "TIM17_CH1N"),
+ STM32_FUNCTION(3, "TIM4_CH2"),
+ STM32_FUNCTION(5, "I2C1_SDA"),
+ STM32_FUNCTION(7, "I2C4_SDA"),
+ STM32_FUNCTION(8, "USART1_RX"),
+ STM32_FUNCTION(10, "CAN2_TXFD"),
+ STM32_FUNCTION(11, "SDMMC2_D1 SDMMC_BOOT2_D1"),
+ STM32_FUNCTION(12, "DFSDM_CK5"),
+ STM32_FUNCTION(13, "FMC_NL"),
+ STM32_FUNCTION(14, "DCMI_VSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(24, "PB8"),
+ STM32_FUNCTION(0, "GPIOB8"),
+ STM32_FUNCTION(1, "HDP6"),
+ STM32_FUNCTION(2, "TIM16_CH1"),
+ STM32_FUNCTION(3, "TIM4_CH3"),
+ STM32_FUNCTION(4, "DFSDM_CK7"),
+ STM32_FUNCTION(5, "I2C1_SCL"),
+ STM32_FUNCTION(6, "SDMMC1_CKIN SDMMC_BOOT1_CKIN"),
+ STM32_FUNCTION(7, "I2C4_SCL"),
+ STM32_FUNCTION(8, "SDMMC2_CKIN SDMMC_BOOT2_CKIN"),
+ STM32_FUNCTION(9, "UART4_RX"),
+ STM32_FUNCTION(10, "CAN1_RX"),
+ STM32_FUNCTION(11, "SDMMC2_D4 SDMMC_BOOT2_D4"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD3 ETH_MII_TXD3 ETH_RGMII_TXD3"),
+ STM32_FUNCTION(13, "SDMMC1_D4 SDMMC_BOOT1_D4"),
+ STM32_FUNCTION(14, "DCMI_D6"),
+ STM32_FUNCTION(15, "LCD_B6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(25, "PB9"),
+ STM32_FUNCTION(0, "GPIOB9"),
+ STM32_FUNCTION(1, "HDP7"),
+ STM32_FUNCTION(2, "TIM17_CH1"),
+ STM32_FUNCTION(3, "TIM4_CH4"),
+ STM32_FUNCTION(4, "DFSDM_DATA7"),
+ STM32_FUNCTION(5, "I2C1_SDA"),
+ STM32_FUNCTION(6, "SPI2_NSS I2S2_WS"),
+ STM32_FUNCTION(7, "I2C4_SDA"),
+ STM32_FUNCTION(8, "SDMMC2_CDIR SDMMC_BOOT2_CDIR"),
+ STM32_FUNCTION(9, "UART4_TX"),
+ STM32_FUNCTION(10, "CAN1_TX"),
+ STM32_FUNCTION(11, "SDMMC2_D5 SDMMC_BOOT2_D5"),
+ STM32_FUNCTION(12, "SDMMC1_CDIR SDMMC_BOOT1_CDIR"),
+ STM32_FUNCTION(13, "SDMMC1_D5 SDMMC_BOOT1_D5"),
+ STM32_FUNCTION(14, "DCMI_D7"),
+ STM32_FUNCTION(15, "LCD_B7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(26, "PB10"),
+ STM32_FUNCTION(0, "GPIOB10"),
+ STM32_FUNCTION(2, "TIM2_CH3"),
+ STM32_FUNCTION(4, "LPTIM2_IN1"),
+ STM32_FUNCTION(5, "I2C2_SCL"),
+ STM32_FUNCTION(6, "SPI2_SCK I2S2_CK"),
+ STM32_FUNCTION(7, "DFSDM_DATA7"),
+ STM32_FUNCTION(8, "USART3_TX USART_BOOT3_TX"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_NCS"),
+ STM32_FUNCTION(12, "ETH_GMII_RX_ER ETH_MII_RX_ER"),
+ STM32_FUNCTION(15, "LCD_G4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(27, "PB11"),
+ STM32_FUNCTION(0, "GPIOB11"),
+ STM32_FUNCTION(2, "TIM2_CH4"),
+ STM32_FUNCTION(4, "LPTIM2_ETR"),
+ STM32_FUNCTION(5, "I2C2_SDA"),
+ STM32_FUNCTION(7, "DFSDM_CK7"),
+ STM32_FUNCTION(8, "USART3_RX"),
+ STM32_FUNCTION(12, "ETH_GMII_TX_EN ETH_MII_TX_EN ETH_RGMII_TX_CTL ETH_RMII_TX_EN"),
+ STM32_FUNCTION(14, "DSI_TE"),
+ STM32_FUNCTION(15, "LCD_G5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(28, "PB12"),
+ STM32_FUNCTION(0, "GPIOB12"),
+ STM32_FUNCTION(2, "TIM1_BKIN"),
+ STM32_FUNCTION(3, "I2C6_SMBA"),
+ STM32_FUNCTION(5, "I2C2_SMBA"),
+ STM32_FUNCTION(6, "SPI2_NSS I2S2_WS"),
+ STM32_FUNCTION(7, "DFSDM_DATA1"),
+ STM32_FUNCTION(8, "USART3_CK USART_BOOT3_CK"),
+ STM32_FUNCTION(9, "USART3_RX USART_BOOT3_RX"),
+ STM32_FUNCTION(10, "CAN2_RX"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD0 ETH_MII_TXD0 ETH_RGMII_TXD0 ETH_RMII_TXD0"),
+ STM32_FUNCTION(15, "UART5_RX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(29, "PB13"),
+ STM32_FUNCTION(0, "GPIOB13"),
+ STM32_FUNCTION(2, "TIM1_CH1N"),
+ STM32_FUNCTION(4, "DFSDM_CKOUT"),
+ STM32_FUNCTION(5, "LPTIM2_OUT"),
+ STM32_FUNCTION(6, "SPI2_SCK I2S2_CK"),
+ STM32_FUNCTION(7, "DFSDM_CK1"),
+ STM32_FUNCTION(8, "USART3_CTS_NSS USART_BOOT3_CTS_NSS"),
+ STM32_FUNCTION(10, "CAN2_TX"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD1 ETH_MII_TXD1 ETH_RGMII_TXD1 ETH_RMII_TXD1"),
+ STM32_FUNCTION(15, "UART5_TX UART_BOOT5_TX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(30, "PB14"),
+ STM32_FUNCTION(0, "GPIOB14"),
+ STM32_FUNCTION(2, "TIM1_CH2N"),
+ STM32_FUNCTION(3, "TIM12_CH1"),
+ STM32_FUNCTION(4, "TIM8_CH2N"),
+ STM32_FUNCTION(5, "USART1_TX"),
+ STM32_FUNCTION(6, "SPI2_MISO I2S2_SDI"),
+ STM32_FUNCTION(7, "DFSDM_DATA2"),
+ STM32_FUNCTION(8, "USART3_RTS USART_BOOT3_RTS"),
+ STM32_FUNCTION(10, "SDMMC2_D0 SDMMC_BOOT2_D0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(31, "PB15"),
+ STM32_FUNCTION(0, "GPIOB15"),
+ STM32_FUNCTION(1, "RTC_REFIN"),
+ STM32_FUNCTION(2, "TIM1_CH3N"),
+ STM32_FUNCTION(3, "TIM12_CH2"),
+ STM32_FUNCTION(4, "TIM8_CH3N"),
+ STM32_FUNCTION(5, "USART1_RX"),
+ STM32_FUNCTION(6, "SPI2_MOSI I2S2_SDO"),
+ STM32_FUNCTION(7, "DFSDM_CK2"),
+ STM32_FUNCTION(10, "SDMMC2_D1 SDMMC_BOOT2_D1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(32, "PC0"),
+ STM32_FUNCTION(0, "GPIOC0"),
+ STM32_FUNCTION(4, "DFSDM_CK0"),
+ STM32_FUNCTION(5, "LPTIM2_IN2"),
+ STM32_FUNCTION(7, "DFSDM_DATA4"),
+ STM32_FUNCTION(9, "SAI2_FS_B"),
+ STM32_FUNCTION(11, "QUADSPI_BK2_NCS QUADSPI_BOOTBK2_NCS"),
+ STM32_FUNCTION(15, "LCD_R5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(33, "PC1"),
+ STM32_FUNCTION(0, "GPIOC1"),
+ STM32_FUNCTION(1, "TRACED0"),
+ STM32_FUNCTION(3, "SAI1_D1"),
+ STM32_FUNCTION(4, "DFSDM_DATA0"),
+ STM32_FUNCTION(5, "DFSDM_CK4"),
+ STM32_FUNCTION(6, "SPI2_MOSI I2S2_SDO"),
+ STM32_FUNCTION(7, "SAI1_SD_A"),
+ STM32_FUNCTION(10, "SDMMC2_CK"),
+ STM32_FUNCTION(12, "ETH_MDC"),
+ STM32_FUNCTION(13, "MDIOS_MDC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(34, "PC2"),
+ STM32_FUNCTION(0, "GPIOC2"),
+ STM32_FUNCTION(4, "DFSDM_CK1"),
+ STM32_FUNCTION(6, "SPI2_MISO I2S2_SDI"),
+ STM32_FUNCTION(7, "DFSDM_CKOUT"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD2 ETH_MII_TXD2 ETH_RGMII_TXD2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(35, "PC3"),
+ STM32_FUNCTION(0, "GPIOC3"),
+ STM32_FUNCTION(1, "TRACECLK"),
+ STM32_FUNCTION(4, "DFSDM_DATA1"),
+ STM32_FUNCTION(6, "SPI2_MOSI I2S2_SDO"),
+ STM32_FUNCTION(12, "ETH_GMII_TX_CLK ETH_MII_TX_CLK"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(36, "PC4"),
+ STM32_FUNCTION(0, "GPIOC4"),
+ STM32_FUNCTION(4, "DFSDM_CK2"),
+ STM32_FUNCTION(6, "I2S1_MCK"),
+ STM32_FUNCTION(10, "SPDIF_IN2"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD0 ETH_MII_RXD0 ETH_RGMII_RXD0 ETH_RMII_RXD0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(37, "PC5"),
+ STM32_FUNCTION(0, "GPIOC5"),
+ STM32_FUNCTION(3, "SAI1_D3"),
+ STM32_FUNCTION(4, "DFSDM_DATA2"),
+ STM32_FUNCTION(5, "SAI4_D4"),
+ STM32_FUNCTION(7, "SAI1_D4"),
+ STM32_FUNCTION(10, "SPDIF_IN3"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD1 ETH_MII_RXD1 ETH_RGMII_RXD1 ETH_RMII_RXD1"),
+ STM32_FUNCTION(13, "SAI4_D3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(38, "PC6"),
+ STM32_FUNCTION(0, "GPIOC6"),
+ STM32_FUNCTION(1, "HDP1"),
+ STM32_FUNCTION(3, "TIM3_CH1"),
+ STM32_FUNCTION(4, "TIM8_CH1"),
+ STM32_FUNCTION(5, "DFSDM_CK3"),
+ STM32_FUNCTION(6, "I2S2_MCK"),
+ STM32_FUNCTION(8, "USART6_TX USART_BOOT6_TX"),
+ STM32_FUNCTION(9, "SDMMC1_D0DIR SDMMC_BOOT1_D0DIR"),
+ STM32_FUNCTION(10, "SDMMC2_D0DIR SDMMC_BOOT2_D0DIR"),
+ STM32_FUNCTION(11, "SDMMC2_D6 SDMMC_BOOT2_D6"),
+ STM32_FUNCTION(12, "DSI_TE"),
+ STM32_FUNCTION(13, "SDMMC1_D6 SDMMC_BOOT1_D6"),
+ STM32_FUNCTION(14, "DCMI_D0"),
+ STM32_FUNCTION(15, "LCD_HSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(39, "PC7"),
+ STM32_FUNCTION(0, "GPIOC7"),
+ STM32_FUNCTION(1, "HDP4"),
+ STM32_FUNCTION(3, "TIM3_CH2"),
+ STM32_FUNCTION(4, "TIM8_CH2"),
+ STM32_FUNCTION(5, "DFSDM_DATA3"),
+ STM32_FUNCTION(7, "I2S3_MCK"),
+ STM32_FUNCTION(8, "USART6_RX USART_BOOT6_RX"),
+ STM32_FUNCTION(9, "SDMMC1_D123DIR SDMMC_BOOT1_D123DIR"),
+ STM32_FUNCTION(10, "SDMMC2_D123DIR SDMMC_BOOT2_D123DIR"),
+ STM32_FUNCTION(11, "SDMMC2_D7 SDMMC_BOOT2_D7"),
+ STM32_FUNCTION(13, "SDMMC1_D7 SDMMC_BOOT1_D7"),
+ STM32_FUNCTION(14, "DCMI_D1"),
+ STM32_FUNCTION(15, "LCD_G6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(40, "PC8"),
+ STM32_FUNCTION(0, "GPIOC8"),
+ STM32_FUNCTION(1, "TRACED0"),
+ STM32_FUNCTION(3, "TIM3_CH3"),
+ STM32_FUNCTION(4, "TIM8_CH3"),
+ STM32_FUNCTION(7, "UART4_TX"),
+ STM32_FUNCTION(8, "USART6_CK USART_BOOT6_CK"),
+ STM32_FUNCTION(9, "UART5_RTS UART_BOOT5_RTS"),
+ STM32_FUNCTION(13, "SDMMC1_D0 SDMMC_BOOT1_D0"),
+ STM32_FUNCTION(14, "DCMI_D2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(41, "PC9"),
+ STM32_FUNCTION(0, "GPIOC9"),
+ STM32_FUNCTION(1, "TRACED1"),
+ STM32_FUNCTION(3, "TIM3_CH4"),
+ STM32_FUNCTION(4, "TIM8_CH4"),
+ STM32_FUNCTION(5, "I2C3_SDA"),
+ STM32_FUNCTION(6, "I2S_CKIN"),
+ STM32_FUNCTION(9, "UART5_CTS UART_BOOT5_CTS"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO0"),
+ STM32_FUNCTION(13, "SDMMC1_D1 SDMMC_BOOT1_D1"),
+ STM32_FUNCTION(14, "DCMI_D3"),
+ STM32_FUNCTION(15, "LCD_B2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(42, "PC10"),
+ STM32_FUNCTION(0, "GPIOC10"),
+ STM32_FUNCTION(1, "TRACED2"),
+ STM32_FUNCTION(4, "DFSDM_CK5"),
+ STM32_FUNCTION(7, "SPI3_SCK I2S3_CK"),
+ STM32_FUNCTION(8, "USART3_TX"),
+ STM32_FUNCTION(9, "UART4_TX"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO1"),
+ STM32_FUNCTION(11, "SAI4_MCLK_B"),
+ STM32_FUNCTION(13, "SDMMC1_D2 SDMMC_BOOT1_D2"),
+ STM32_FUNCTION(14, "DCMI_D8"),
+ STM32_FUNCTION(15, "LCD_R2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(43, "PC11"),
+ STM32_FUNCTION(0, "GPIOC11"),
+ STM32_FUNCTION(1, "TRACED3"),
+ STM32_FUNCTION(4, "DFSDM_DATA5"),
+ STM32_FUNCTION(7, "SPI3_MISO I2S3_SDI"),
+ STM32_FUNCTION(8, "USART3_RX"),
+ STM32_FUNCTION(9, "UART4_RX"),
+ STM32_FUNCTION(10, "QUADSPI_BK2_NCS QUADSPI_BOOTBK2_NCS"),
+ STM32_FUNCTION(11, "SAI4_SCK_B"),
+ STM32_FUNCTION(13, "SDMMC1_D3 SDMMC_BOOT1_D3"),
+ STM32_FUNCTION(14, "DCMI_D4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(44, "PC12"),
+ STM32_FUNCTION(0, "GPIOC12"),
+ STM32_FUNCTION(1, "TRACECLK"),
+ STM32_FUNCTION(2, "MCO2"),
+ STM32_FUNCTION(3, "SAI4_D3"),
+ STM32_FUNCTION(7, "SPI3_MOSI I2S3_SDO"),
+ STM32_FUNCTION(8, "USART3_CK USART_BOOT3_CK"),
+ STM32_FUNCTION(9, "UART5_TX"),
+ STM32_FUNCTION(11, "SAI4_SD_B"),
+ STM32_FUNCTION(13, "SDMMC1_CK SDMMC_BOOT1_CK"),
+ STM32_FUNCTION(14, "DCMI_D9"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(45, "PC13"),
+ STM32_FUNCTION(0, "GPIOC13"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(46, "PC14"),
+ STM32_FUNCTION(0, "GPIOC14"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(47, "PC15"),
+ STM32_FUNCTION(0, "GPIOC15"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(48, "PD0"),
+ STM32_FUNCTION(0, "GPIOD0"),
+ STM32_FUNCTION(3, "I2C6_SDA"),
+ STM32_FUNCTION(4, "DFSDM_CK6"),
+ STM32_FUNCTION(5, "I2C5_SDA"),
+ STM32_FUNCTION(7, "SAI3_SCK_A"),
+ STM32_FUNCTION(9, "UART4_RX"),
+ STM32_FUNCTION(10, "CAN1_RX"),
+ STM32_FUNCTION(11, "SDMMC3_CMD"),
+ STM32_FUNCTION(12, "DFSDM_DATA7"),
+ STM32_FUNCTION(13, "FMC_D2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(49, "PD1"),
+ STM32_FUNCTION(0, "GPIOD1"),
+ STM32_FUNCTION(3, "I2C6_SCL"),
+ STM32_FUNCTION(4, "DFSDM_DATA6"),
+ STM32_FUNCTION(5, "I2C5_SCL"),
+ STM32_FUNCTION(7, "SAI3_SD_A"),
+ STM32_FUNCTION(9, "UART4_TX"),
+ STM32_FUNCTION(10, "CAN1_TX"),
+ STM32_FUNCTION(11, "SDMMC3_D0"),
+ STM32_FUNCTION(12, "DFSDM_CK7"),
+ STM32_FUNCTION(13, "FMC_D3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(50, "PD2"),
+ STM32_FUNCTION(0, "GPIOD2"),
+ STM32_FUNCTION(3, "TIM3_ETR"),
+ STM32_FUNCTION(5, "I2C5_SMBA"),
+ STM32_FUNCTION(7, "UART4_RX"),
+ STM32_FUNCTION(9, "UART5_RX"),
+ STM32_FUNCTION(13, "SDMMC1_CMD SDMMC_BOOT1_CMD"),
+ STM32_FUNCTION(14, "DCMI_D11"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(51, "PD3"),
+ STM32_FUNCTION(0, "GPIOD3"),
+ STM32_FUNCTION(1, "HDP5"),
+ STM32_FUNCTION(4, "DFSDM_CKOUT"),
+ STM32_FUNCTION(6, "SPI2_SCK I2S2_CK"),
+ STM32_FUNCTION(7, "DFSDM_DATA0"),
+ STM32_FUNCTION(8, "USART2_CTS_NSS USART_BOOT2_CTS_NSS"),
+ STM32_FUNCTION(9, "SDMMC1_D123DIR SDMMC_BOOT1_D123DIR"),
+ STM32_FUNCTION(10, "SDMMC2_D7 SDMMC_BOOT2_D7"),
+ STM32_FUNCTION(11, "SDMMC2_D123DIR SDMMC_BOOT2_D123DIR"),
+ STM32_FUNCTION(12, "SDMMC1_D7 SDMMC_BOOT1_D7"),
+ STM32_FUNCTION(13, "FMC_CLK"),
+ STM32_FUNCTION(14, "DCMI_D5"),
+ STM32_FUNCTION(15, "LCD_G7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(52, "PD4"),
+ STM32_FUNCTION(0, "GPIOD4"),
+ STM32_FUNCTION(7, "SAI3_FS_A"),
+ STM32_FUNCTION(8, "USART2_RTS USART_BOOT2_RTS"),
+ STM32_FUNCTION(10, "CAN1_RXFD"),
+ STM32_FUNCTION(11, "SDMMC3_D1"),
+ STM32_FUNCTION(12, "DFSDM_CK0"),
+ STM32_FUNCTION(13, "FMC_NOE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(53, "PD5"),
+ STM32_FUNCTION(0, "GPIOD5"),
+ STM32_FUNCTION(8, "USART2_TX"),
+ STM32_FUNCTION(10, "CAN1_TXFD"),
+ STM32_FUNCTION(11, "SDMMC3_D2"),
+ STM32_FUNCTION(13, "FMC_NWE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(54, "PD6"),
+ STM32_FUNCTION(0, "GPIOD6"),
+ STM32_FUNCTION(2, "TIM16_CH1N"),
+ STM32_FUNCTION(3, "SAI1_D1"),
+ STM32_FUNCTION(4, "DFSDM_CK4"),
+ STM32_FUNCTION(5, "DFSDM_DATA1"),
+ STM32_FUNCTION(6, "SPI3_MOSI I2S3_SDO"),
+ STM32_FUNCTION(7, "SAI1_SD_A"),
+ STM32_FUNCTION(8, "USART2_RX"),
+ STM32_FUNCTION(10, "CAN2_RXFD"),
+ STM32_FUNCTION(11, "FMC_INT"),
+ STM32_FUNCTION(13, "FMC_NWAIT"),
+ STM32_FUNCTION(14, "DCMI_D10"),
+ STM32_FUNCTION(15, "LCD_B2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(55, "PD7"),
+ STM32_FUNCTION(0, "GPIOD7"),
+ STM32_FUNCTION(1, "TRACED6"),
+ STM32_FUNCTION(4, "DFSDM_DATA4"),
+ STM32_FUNCTION(5, "I2C2_SCL"),
+ STM32_FUNCTION(7, "DFSDM_CK1"),
+ STM32_FUNCTION(8, "USART2_CK USART_BOOT2_CK"),
+ STM32_FUNCTION(10, "SPDIF_IN0"),
+ STM32_FUNCTION(11, "SDMMC3_D3"),
+ STM32_FUNCTION(13, "FMC_NE1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(56, "PD8"),
+ STM32_FUNCTION(0, "GPIOD8"),
+ STM32_FUNCTION(4, "DFSDM_CK3"),
+ STM32_FUNCTION(7, "SAI3_SCK_B"),
+ STM32_FUNCTION(8, "USART3_TX"),
+ STM32_FUNCTION(10, "SPDIF_IN1"),
+ STM32_FUNCTION(13, "FMC_D13"),
+ STM32_FUNCTION(15, "LCD_B7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(57, "PD9"),
+ STM32_FUNCTION(0, "GPIOD9"),
+ STM32_FUNCTION(4, "DFSDM_DATA3"),
+ STM32_FUNCTION(7, "SAI3_SD_B"),
+ STM32_FUNCTION(8, "USART3_RX"),
+ STM32_FUNCTION(10, "CAN2_RXFD"),
+ STM32_FUNCTION(13, "FMC_D14"),
+ STM32_FUNCTION(15, "LCD_B0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(58, "PD10"),
+ STM32_FUNCTION(0, "GPIOD10"),
+ STM32_FUNCTION(1, "RTC_REFIN"),
+ STM32_FUNCTION(2, "TIM16_BKIN"),
+ STM32_FUNCTION(4, "DFSDM_CKOUT"),
+ STM32_FUNCTION(5, "I2C5_SMBA"),
+ STM32_FUNCTION(6, "SPI3_MISO I2S3_SDI"),
+ STM32_FUNCTION(7, "SAI3_FS_B"),
+ STM32_FUNCTION(8, "USART3_CK USART_BOOT3_CK"),
+ STM32_FUNCTION(10, "CAN2_TXFD"),
+ STM32_FUNCTION(13, "FMC_D15"),
+ STM32_FUNCTION(15, "LCD_B3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(59, "PD11"),
+ STM32_FUNCTION(0, "GPIOD11"),
+ STM32_FUNCTION(4, "LPTIM2_IN2"),
+ STM32_FUNCTION(5, "I2C4_SMBA"),
+ STM32_FUNCTION(6, "I2C1_SMBA"),
+ STM32_FUNCTION(8, "USART3_CTS_NSS USART_BOOT3_CTS_NSS"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO0"),
+ STM32_FUNCTION(11, "SAI2_SD_A"),
+ STM32_FUNCTION(13, "FMC_A16 FMC_CLE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(60, "PD12"),
+ STM32_FUNCTION(0, "GPIOD12"),
+ STM32_FUNCTION(2, "LPTIM1_IN1"),
+ STM32_FUNCTION(3, "TIM4_CH1"),
+ STM32_FUNCTION(4, "LPTIM2_IN1"),
+ STM32_FUNCTION(5, "I2C4_SCL"),
+ STM32_FUNCTION(6, "I2C1_SCL"),
+ STM32_FUNCTION(8, "USART3_RTS USART_BOOT3_RTS"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO1"),
+ STM32_FUNCTION(11, "SAI2_FS_A"),
+ STM32_FUNCTION(13, "FMC_A17 FMC_ALE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(61, "PD13"),
+ STM32_FUNCTION(0, "GPIOD13"),
+ STM32_FUNCTION(2, "LPTIM1_OUT"),
+ STM32_FUNCTION(3, "TIM4_CH2"),
+ STM32_FUNCTION(5, "I2C4_SDA"),
+ STM32_FUNCTION(6, "I2C1_SDA"),
+ STM32_FUNCTION(7, "I2S3_MCK"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO3 QUADSPI_BOOTBK1_IO3"),
+ STM32_FUNCTION(11, "SAI2_SCK_A"),
+ STM32_FUNCTION(13, "FMC_A18"),
+ STM32_FUNCTION(14, "DSI_TE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(62, "PD14"),
+ STM32_FUNCTION(0, "GPIOD14"),
+ STM32_FUNCTION(3, "TIM4_CH3"),
+ STM32_FUNCTION(7, "SAI3_MCLK_B"),
+ STM32_FUNCTION(9, "UART8_CTS UART_BOOT8_CTS"),
+ STM32_FUNCTION(13, "FMC_D0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(63, "PD15"),
+ STM32_FUNCTION(0, "GPIOD15"),
+ STM32_FUNCTION(3, "TIM4_CH4"),
+ STM32_FUNCTION(7, "SAI3_MCLK_A"),
+ STM32_FUNCTION(9, "UART8_CTS UART_BOOT8_CTS"),
+ STM32_FUNCTION(13, "FMC_D1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(64, "PE0"),
+ STM32_FUNCTION(0, "GPIOE0"),
+ STM32_FUNCTION(2, "LPTIM1_ETR"),
+ STM32_FUNCTION(3, "TIM4_ETR"),
+ STM32_FUNCTION(5, "LPTIM2_ETR"),
+ STM32_FUNCTION(6, "SPI3_SCK I2S3_CK"),
+ STM32_FUNCTION(7, "SAI4_MCLK_B"),
+ STM32_FUNCTION(9, "UART8_RX UART_BOOT8_RX"),
+ STM32_FUNCTION(10, "CAN1_RXFD"),
+ STM32_FUNCTION(11, "SAI2_MCLK_A"),
+ STM32_FUNCTION(13, "FMC_NBL0"),
+ STM32_FUNCTION(14, "DCMI_D2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(65, "PE1"),
+ STM32_FUNCTION(0, "GPIOE1"),
+ STM32_FUNCTION(2, "LPTIM1_IN2"),
+ STM32_FUNCTION(6, "I2S2_MCK"),
+ STM32_FUNCTION(7, "SAI3_SD_B"),
+ STM32_FUNCTION(9, "UART8_TX UART_BOOT8_TX"),
+ STM32_FUNCTION(10, "CAN1_TXFD"),
+ STM32_FUNCTION(13, "FMC_NBL1"),
+ STM32_FUNCTION(14, "DCMI_D3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(66, "PE2"),
+ STM32_FUNCTION(0, "GPIOE2"),
+ STM32_FUNCTION(1, "TRACECLK"),
+ STM32_FUNCTION(3, "SAI1_CK1"),
+ STM32_FUNCTION(5, "I2C4_SCL"),
+ STM32_FUNCTION(6, "SPI4_SCK"),
+ STM32_FUNCTION(7, "SAI1_MCLK_A"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO2 QUADSPI_BOOTBK1_IO2"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD3 ETH_MII_TXD3 ETH_RGMII_TXD3"),
+ STM32_FUNCTION(13, "FMC_A23"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(67, "PE3"),
+ STM32_FUNCTION(0, "GPIOE3"),
+ STM32_FUNCTION(1, "TRACED0"),
+ STM32_FUNCTION(5, "TIM15_BKIN"),
+ STM32_FUNCTION(7, "SAI1_SD_B"),
+ STM32_FUNCTION(10, "SDMMC2_CK SDMMC_BOOT2_CK"),
+ STM32_FUNCTION(13, "FMC_A19"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(68, "PE4"),
+ STM32_FUNCTION(0, "GPIOE4"),
+ STM32_FUNCTION(1, "TRACED1"),
+ STM32_FUNCTION(3, "SAI1_D2"),
+ STM32_FUNCTION(4, "DFSDM_DATA3"),
+ STM32_FUNCTION(5, "TIM15_CH1N"),
+ STM32_FUNCTION(6, "SPI4_NSS"),
+ STM32_FUNCTION(7, "SAI1_FS_A"),
+ STM32_FUNCTION(8, "SDMMC2_CKIN SDMMC_BOOT2_CKIN"),
+ STM32_FUNCTION(9, "SDMMC1_CKIN SDMMC_BOOT1_CKIN"),
+ STM32_FUNCTION(10, "SDMMC2_D4 SDMMC_BOOT2_D4"),
+ STM32_FUNCTION(12, "SDMMC1_D4 SDMMC_BOOT1_D4"),
+ STM32_FUNCTION(13, "FMC_A20"),
+ STM32_FUNCTION(14, "DCMI_D4"),
+ STM32_FUNCTION(15, "LCD_B0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(69, "PE5"),
+ STM32_FUNCTION(0, "GPIOE5"),
+ STM32_FUNCTION(1, "TRACED3"),
+ STM32_FUNCTION(3, "SAI1_CK2"),
+ STM32_FUNCTION(4, "DFSDM_CK3"),
+ STM32_FUNCTION(5, "TIM15_CH1"),
+ STM32_FUNCTION(6, "SPI4_MISO"),
+ STM32_FUNCTION(7, "SAI1_SCK_A"),
+ STM32_FUNCTION(8, "SDMMC2_D0DIR SDMMC_BOOT2_D0DIR"),
+ STM32_FUNCTION(9, "SDMMC1_D0DIR SDMMC_BOOT1_D0DIR"),
+ STM32_FUNCTION(10, "SDMMC2_D6 SDMMC_BOOT2_D6"),
+ STM32_FUNCTION(12, "SDMMC1_D6 SDMMC_BOOT1_D6"),
+ STM32_FUNCTION(13, "FMC_A21"),
+ STM32_FUNCTION(14, "DCMI_D6"),
+ STM32_FUNCTION(15, "LCD_G0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(70, "PE6"),
+ STM32_FUNCTION(0, "GPIOE6"),
+ STM32_FUNCTION(1, "TRACED2"),
+ STM32_FUNCTION(2, "TIM1_BKIN2"),
+ STM32_FUNCTION(3, "SAI1_D1"),
+ STM32_FUNCTION(5, "TIM15_CH2"),
+ STM32_FUNCTION(6, "SPI4_MOSI"),
+ STM32_FUNCTION(7, "SAI1_SD_A"),
+ STM32_FUNCTION(8, "SDMMC2_D0"),
+ STM32_FUNCTION(9, "SDMMC1_D2 SDMMC_BOOT1_D2"),
+ STM32_FUNCTION(11, "SAI2_MCLK_B"),
+ STM32_FUNCTION(13, "FMC_A22"),
+ STM32_FUNCTION(14, "DCMI_D7"),
+ STM32_FUNCTION(15, "LCD_G1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(71, "PE7"),
+ STM32_FUNCTION(0, "GPIOE7"),
+ STM32_FUNCTION(2, "TIM1_ETR"),
+ STM32_FUNCTION(3, "TIM3_ETR"),
+ STM32_FUNCTION(4, "DFSDM_DATA2"),
+ STM32_FUNCTION(8, "UART7_RX"),
+ STM32_FUNCTION(11, "QUADSPI_BK2_IO0 QUADSPI_BOOTBK2_IO0"),
+ STM32_FUNCTION(13, "FMC_D4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(72, "PE8"),
+ STM32_FUNCTION(0, "GPIOE8"),
+ STM32_FUNCTION(2, "TIM1_CH1N"),
+ STM32_FUNCTION(4, "DFSDM_CK2"),
+ STM32_FUNCTION(8, "UART7_TX"),
+ STM32_FUNCTION(11, "QUADSPI_BK2_IO1 QUADSPI_BOOTBK2_IO1"),
+ STM32_FUNCTION(13, "FMC_D5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(73, "PE9"),
+ STM32_FUNCTION(0, "GPIOE9"),
+ STM32_FUNCTION(2, "TIM1_CH1"),
+ STM32_FUNCTION(4, "DFSDM_CKOUT"),
+ STM32_FUNCTION(8, "UART7_RTS UART_BOOT7_RTS"),
+ STM32_FUNCTION(11, "QUADSPI_BK2_IO2 QUADSPI_BOOTBK2_IO2"),
+ STM32_FUNCTION(13, "FMC_D6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(74, "PE10"),
+ STM32_FUNCTION(0, "GPIOE10"),
+ STM32_FUNCTION(2, "TIM1_CH2N"),
+ STM32_FUNCTION(4, "DFSDM_DATA4"),
+ STM32_FUNCTION(8, "UART7_CTS UART_BOOT7_CTS"),
+ STM32_FUNCTION(11, "QUADSPI_BK2_IO3 QUADSPI_BOOTBK2_IO3"),
+ STM32_FUNCTION(13, "FMC_D7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(75, "PE11"),
+ STM32_FUNCTION(0, "GPIOE11"),
+ STM32_FUNCTION(2, "TIM1_CH2"),
+ STM32_FUNCTION(4, "DFSDM_CK4"),
+ STM32_FUNCTION(6, "SPI4_NSS"),
+ STM32_FUNCTION(8, "USART6_CK USART_BOOT6_CK"),
+ STM32_FUNCTION(11, "SAI2_SD_B"),
+ STM32_FUNCTION(13, "FMC_D8"),
+ STM32_FUNCTION(15, "LCD_G3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(76, "PE12"),
+ STM32_FUNCTION(0, "GPIOE12"),
+ STM32_FUNCTION(2, "TIM1_CH3N"),
+ STM32_FUNCTION(4, "DFSDM_DATA5"),
+ STM32_FUNCTION(6, "SPI4_SCK"),
+ STM32_FUNCTION(9, "SDMMC1_D0DIR SDMMC_BOOT1_D0DIR"),
+ STM32_FUNCTION(11, "SAI2_SCK_B"),
+ STM32_FUNCTION(13, "FMC_D9"),
+ STM32_FUNCTION(15, "LCD_B4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(77, "PE13"),
+ STM32_FUNCTION(0, "GPIOE13"),
+ STM32_FUNCTION(1, "HDP2"),
+ STM32_FUNCTION(2, "TIM1_CH3"),
+ STM32_FUNCTION(4, "DFSDM_CK5"),
+ STM32_FUNCTION(6, "SPI4_MISO"),
+ STM32_FUNCTION(11, "SAI2_FS_B"),
+ STM32_FUNCTION(13, "FMC_D10"),
+ STM32_FUNCTION(15, "LCD_DE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(78, "PE14"),
+ STM32_FUNCTION(0, "GPIOE14"),
+ STM32_FUNCTION(2, "TIM1_CH4"),
+ STM32_FUNCTION(6, "SPI4_MOSI"),
+ STM32_FUNCTION(9, "UART8_RTS UART_BOOT8_RTS"),
+ STM32_FUNCTION(11, "SAI2_MCLK_B"),
+ STM32_FUNCTION(12, "SDMMC1_D123DIR SDMMC_BOOT1_D123DIR"),
+ STM32_FUNCTION(13, "FMC_D11"),
+ STM32_FUNCTION(14, "LCD_G0"),
+ STM32_FUNCTION(15, "LCD_CLK"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(79, "PE15"),
+ STM32_FUNCTION(0, "GPIOE15"),
+ STM32_FUNCTION(1, "HDP3"),
+ STM32_FUNCTION(2, "TIM1_BKIN"),
+ STM32_FUNCTION(5, "TIM15_BKIN"),
+ STM32_FUNCTION(8, "USART2_CTS_NSS USART_BOOT2_CTS_NSS"),
+ STM32_FUNCTION(9, "UART8_CTS UART_BOOT8_CTS"),
+ STM32_FUNCTION(13, "FMC_D12"),
+ STM32_FUNCTION(15, "LCD_R7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(80, "PF0"),
+ STM32_FUNCTION(0, "GPIOF0"),
+ STM32_FUNCTION(5, "I2C2_SDA"),
+ STM32_FUNCTION(10, "SDMMC3_D0"),
+ STM32_FUNCTION(11, "SDMMC3_CKIN"),
+ STM32_FUNCTION(13, "FMC_A0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(81, "PF1"),
+ STM32_FUNCTION(0, "GPIOF1"),
+ STM32_FUNCTION(5, "I2C2_SCL"),
+ STM32_FUNCTION(10, "SDMMC3_CMD"),
+ STM32_FUNCTION(11, "SDMMC3_CDIR"),
+ STM32_FUNCTION(13, "FMC_A1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(82, "PF2"),
+ STM32_FUNCTION(0, "GPIOF2"),
+ STM32_FUNCTION(5, "I2C2_SMBA"),
+ STM32_FUNCTION(10, "SDMMC2_D0DIR SDMMC_BOOT2_D0DIR"),
+ STM32_FUNCTION(11, "SDMMC3_D0DIR"),
+ STM32_FUNCTION(12, "SDMMC1_D0DIR SDMMC_BOOT1_D0DIR"),
+ STM32_FUNCTION(13, "FMC_A2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(83, "PF3"),
+ STM32_FUNCTION(0, "GPIOF3"),
+ STM32_FUNCTION(12, "ETH_GMII_TX_ER ETH_MII_TX_ER"),
+ STM32_FUNCTION(13, "FMC_A3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(84, "PF4"),
+ STM32_FUNCTION(0, "GPIOF4"),
+ STM32_FUNCTION(8, "USART2_RX"),
+ STM32_FUNCTION(10, "SDMMC3_D1"),
+ STM32_FUNCTION(11, "SDMMC3_D123DIR"),
+ STM32_FUNCTION(13, "FMC_A4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(85, "PF5"),
+ STM32_FUNCTION(0, "GPIOF5"),
+ STM32_FUNCTION(8, "USART2_TX"),
+ STM32_FUNCTION(10, "SDMMC3_D2"),
+ STM32_FUNCTION(13, "FMC_A5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(86, "PF6"),
+ STM32_FUNCTION(0, "GPIOF6"),
+ STM32_FUNCTION(2, "TIM16_CH1"),
+ STM32_FUNCTION(6, "SPI5_NSS"),
+ STM32_FUNCTION(7, "SAI1_SD_B"),
+ STM32_FUNCTION(8, "UART7_RX UART_BOOT7_RX"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO3 QUADSPI_BOOTBK1_IO3"),
+ STM32_FUNCTION(13, "SAI4_SCK_B"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(87, "PF7"),
+ STM32_FUNCTION(0, "GPIOF7"),
+ STM32_FUNCTION(2, "TIM17_CH1"),
+ STM32_FUNCTION(6, "SPI5_SCK"),
+ STM32_FUNCTION(7, "SAI1_MCLK_B"),
+ STM32_FUNCTION(8, "UART7_TX UART_BOOT7_TX"),
+ STM32_FUNCTION(10, "QUADSPI_BK1_IO2 QUADSPI_BOOTBK1_IO2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(88, "PF8"),
+ STM32_FUNCTION(0, "GPIOF8"),
+ STM32_FUNCTION(1, "TRACED12"),
+ STM32_FUNCTION(2, "TIM16_CH1N"),
+ STM32_FUNCTION(6, "SPI5_MISO"),
+ STM32_FUNCTION(7, "SAI1_SCK_B"),
+ STM32_FUNCTION(8, "UART7_RTS UART_BOOT7_RTS"),
+ STM32_FUNCTION(10, "TIM13_CH1"),
+ STM32_FUNCTION(11, "QUADSPI_BK1_IO0 QUADSPI_BOOTBK1_IO0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(89, "PF9"),
+ STM32_FUNCTION(0, "GPIOF9"),
+ STM32_FUNCTION(1, "TRACED13"),
+ STM32_FUNCTION(2, "TIM17_CH1N"),
+ STM32_FUNCTION(6, "SPI5_MOSI"),
+ STM32_FUNCTION(7, "SAI1_FS_B"),
+ STM32_FUNCTION(8, "UART7_CTS UART_BOOT7_CTS"),
+ STM32_FUNCTION(10, "TIM14_CH1"),
+ STM32_FUNCTION(11, "QUADSPI_BK1_IO1 QUADSPI_BOOTBK1_IO1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(90, "PF10"),
+ STM32_FUNCTION(0, "GPIOF10"),
+ STM32_FUNCTION(2, "TIM16_BKIN"),
+ STM32_FUNCTION(3, "SAI1_D3"),
+ STM32_FUNCTION(4, "SAI4_D4"),
+ STM32_FUNCTION(7, "SAI1_D4"),
+ STM32_FUNCTION(10, "QUADSPI_CLK QUADSPI_BOOTCLK"),
+ STM32_FUNCTION(13, "SAI4_D3"),
+ STM32_FUNCTION(14, "DCMI_D11"),
+ STM32_FUNCTION(15, "LCD_DE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(91, "PF11"),
+ STM32_FUNCTION(0, "GPIOF11"),
+ STM32_FUNCTION(6, "SPI5_MOSI"),
+ STM32_FUNCTION(11, "SAI2_SD_B"),
+ STM32_FUNCTION(14, "DCMI_D12"),
+ STM32_FUNCTION(15, "LCD_G5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(92, "PF12"),
+ STM32_FUNCTION(0, "GPIOF12"),
+ STM32_FUNCTION(1, "TRACED4"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD4"),
+ STM32_FUNCTION(13, "FMC_A6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(93, "PF13"),
+ STM32_FUNCTION(0, "GPIOF13"),
+ STM32_FUNCTION(1, "TRACED5"),
+ STM32_FUNCTION(4, "DFSDM_DATA6"),
+ STM32_FUNCTION(5, "I2C4_SMBA"),
+ STM32_FUNCTION(6, "I2C1_SMBA"),
+ STM32_FUNCTION(7, "DFSDM_DATA3"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD5"),
+ STM32_FUNCTION(13, "FMC_A7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(94, "PF14"),
+ STM32_FUNCTION(0, "GPIOF14"),
+ STM32_FUNCTION(1, "TRACED6"),
+ STM32_FUNCTION(4, "DFSDM_CK6"),
+ STM32_FUNCTION(5, "I2C4_SCL"),
+ STM32_FUNCTION(6, "I2C1_SCL"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD6"),
+ STM32_FUNCTION(13, "FMC_A8"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(95, "PF15"),
+ STM32_FUNCTION(0, "GPIOF15"),
+ STM32_FUNCTION(1, "TRACED7"),
+ STM32_FUNCTION(5, "I2C4_SDA"),
+ STM32_FUNCTION(6, "I2C1_SDA"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD7"),
+ STM32_FUNCTION(13, "FMC_A9"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(96, "PG0"),
+ STM32_FUNCTION(0, "GPIOG0"),
+ STM32_FUNCTION(1, "TRACED0"),
+ STM32_FUNCTION(4, "DFSDM_DATA0"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD4"),
+ STM32_FUNCTION(13, "FMC_A10"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(97, "PG1"),
+ STM32_FUNCTION(0, "GPIOG1"),
+ STM32_FUNCTION(1, "TRACED1"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD5"),
+ STM32_FUNCTION(13, "FMC_A11"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(98, "PG2"),
+ STM32_FUNCTION(0, "GPIOG2"),
+ STM32_FUNCTION(1, "TRACED2"),
+ STM32_FUNCTION(2, "MCO2"),
+ STM32_FUNCTION(4, "TIM8_BKIN"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD6"),
+ STM32_FUNCTION(13, "FMC_A12"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(99, "PG3"),
+ STM32_FUNCTION(0, "GPIOG3"),
+ STM32_FUNCTION(1, "TRACED3"),
+ STM32_FUNCTION(4, "TIM8_BKIN2"),
+ STM32_FUNCTION(5, "DFSDM_CK1"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD7"),
+ STM32_FUNCTION(13, "FMC_A13"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(100, "PG4"),
+ STM32_FUNCTION(0, "GPIOG4"),
+ STM32_FUNCTION(2, "TIM1_BKIN2"),
+ STM32_FUNCTION(12, "ETH_GMII_GTX_CLK ETH_RGMII_GTX_CLK"),
+ STM32_FUNCTION(13, "FMC_A14"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(101, "PG5"),
+ STM32_FUNCTION(0, "GPIOG5"),
+ STM32_FUNCTION(2, "TIM1_ETR"),
+ STM32_FUNCTION(12, "ETH_GMII_CLK125 ETH_RGMII_CLK125"),
+ STM32_FUNCTION(13, "FMC_A15"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(102, "PG6"),
+ STM32_FUNCTION(0, "GPIOG6"),
+ STM32_FUNCTION(1, "TRACED14"),
+ STM32_FUNCTION(2, "TIM17_BKIN"),
+ STM32_FUNCTION(11, "SDMMC2_CMD SDMMC_BOOT2_CMD"),
+ STM32_FUNCTION(14, "DCMI_D12"),
+ STM32_FUNCTION(15, "LCD_R7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(103, "PG7"),
+ STM32_FUNCTION(0, "GPIOG7"),
+ STM32_FUNCTION(1, "TRACED5"),
+ STM32_FUNCTION(7, "SAI1_MCLK_A"),
+ STM32_FUNCTION(8, "USART6_CK USART_BOOT6_CK"),
+ STM32_FUNCTION(9, "UART8_RTS UART_BOOT8_RTS"),
+ STM32_FUNCTION(10, "QUADSPI_CLK"),
+ STM32_FUNCTION(12, "QUADSPI_BK2_IO3 QUADSPI_BOOTBK2_IO3"),
+ STM32_FUNCTION(13, "FMC_INT"),
+ STM32_FUNCTION(14, "DCMI_D13"),
+ STM32_FUNCTION(15, "LCD_CLK"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(104, "PG8"),
+ STM32_FUNCTION(0, "GPIOG8"),
+ STM32_FUNCTION(1, "TRACED15"),
+ STM32_FUNCTION(2, "TIM2_CH1 TIM2_ETR"),
+ STM32_FUNCTION(3, "ETH_CLK"),
+ STM32_FUNCTION(4, "TIM8_ETR"),
+ STM32_FUNCTION(6, "SPI6_NSS"),
+ STM32_FUNCTION(7, "SAI4_D2"),
+ STM32_FUNCTION(8, "USART6_RTS USART_BOOT6_RTS"),
+ STM32_FUNCTION(9, "USART3_RTS"),
+ STM32_FUNCTION(10, "SPDIF_IN2"),
+ STM32_FUNCTION(11, "SAI4_FS_A"),
+ STM32_FUNCTION(12, "ETH_PPS_OUT"),
+ STM32_FUNCTION(15, "LCD_G7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(105, "PG9"),
+ STM32_FUNCTION(0, "GPIOG9"),
+ STM32_FUNCTION(1, "DBTRGO"),
+ STM32_FUNCTION(8, "USART6_RX"),
+ STM32_FUNCTION(9, "SPDIF_IN3"),
+ STM32_FUNCTION(10, "QUADSPI_BK2_IO2 QUADSPI_BOOTBK2_IO2"),
+ STM32_FUNCTION(11, "SAI2_FS_B"),
+ STM32_FUNCTION(13, "FMC_NE2 FMC_NCE"),
+ STM32_FUNCTION(14, "DCMI_VSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(106, "PG10"),
+ STM32_FUNCTION(0, "GPIOG10"),
+ STM32_FUNCTION(1, "TRACED10"),
+ STM32_FUNCTION(9, "UART8_CTS UART_BOOT8_CTS"),
+ STM32_FUNCTION(10, "LCD_G3"),
+ STM32_FUNCTION(11, "SAI2_SD_B"),
+ STM32_FUNCTION(12, "QUADSPI_BK2_IO2 QUADSPI_BOOTBK2_IO2"),
+ STM32_FUNCTION(13, "FMC_NE3"),
+ STM32_FUNCTION(14, "DCMI_D2"),
+ STM32_FUNCTION(15, "LCD_B2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(107, "PG11"),
+ STM32_FUNCTION(0, "GPIOG11"),
+ STM32_FUNCTION(1, "TRACED11"),
+ STM32_FUNCTION(5, "USART1_TX"),
+ STM32_FUNCTION(7, "UART4_TX UART_BOOT4_TX"),
+ STM32_FUNCTION(9, "SPDIF_IN0"),
+ STM32_FUNCTION(12, "ETH_GMII_TX_EN ETH_MII_TX_EN ETH_RGMII_TX_CTL ETH_RMII_TX_EN"),
+ STM32_FUNCTION(14, "DCMI_D3"),
+ STM32_FUNCTION(15, "LCD_B3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(108, "PG12"),
+ STM32_FUNCTION(0, "GPIOG12"),
+ STM32_FUNCTION(2, "LPTIM1_IN1"),
+ STM32_FUNCTION(6, "SPI6_MISO"),
+ STM32_FUNCTION(7, "SAI4_CK2"),
+ STM32_FUNCTION(8, "USART6_RTS USART_BOOT6_RTS"),
+ STM32_FUNCTION(9, "SPDIF_IN1"),
+ STM32_FUNCTION(10, "LCD_B4"),
+ STM32_FUNCTION(11, "SAI4_SCK_A"),
+ STM32_FUNCTION(12, "ETH_PHY_INTN"),
+ STM32_FUNCTION(13, "FMC_NE4"),
+ STM32_FUNCTION(15, "LCD_B1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(109, "PG13"),
+ STM32_FUNCTION(0, "GPIOG13"),
+ STM32_FUNCTION(1, "TRACED0"),
+ STM32_FUNCTION(2, "LPTIM1_OUT"),
+ STM32_FUNCTION(3, "SAI1_CK2"),
+ STM32_FUNCTION(5, "SAI4_CK1"),
+ STM32_FUNCTION(6, "SPI6_SCK"),
+ STM32_FUNCTION(7, "SAI1_SCK_A"),
+ STM32_FUNCTION(8, "USART6_CTS_NSS USART_BOOT6_CTS_NSS"),
+ STM32_FUNCTION(11, "SAI4_MCLK_A"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD0 ETH_MII_TXD0 ETH_RGMII_TXD0 ETH_RMII_TXD0"),
+ STM32_FUNCTION(13, "FMC_A24"),
+ STM32_FUNCTION(15, "LCD_R0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(110, "PG14"),
+ STM32_FUNCTION(0, "GPIOG14"),
+ STM32_FUNCTION(1, "TRACED1"),
+ STM32_FUNCTION(2, "LPTIM1_ETR"),
+ STM32_FUNCTION(6, "SPI6_MOSI"),
+ STM32_FUNCTION(7, "SAI4_D1"),
+ STM32_FUNCTION(8, "USART6_TX"),
+ STM32_FUNCTION(10, "QUADSPI_BK2_IO3 QUADSPI_BOOTBK2_IO3"),
+ STM32_FUNCTION(11, "SAI4_SD_A"),
+ STM32_FUNCTION(12, "ETH_GMII_TXD1 ETH_MII_TXD1 ETH_RGMII_TXD1 ETH_RMII_TXD1"),
+ STM32_FUNCTION(13, "FMC_A25"),
+ STM32_FUNCTION(15, "LCD_B0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(111, "PG15"),
+ STM32_FUNCTION(0, "GPIOG15"),
+ STM32_FUNCTION(1, "TRACED7"),
+ STM32_FUNCTION(3, "SAI1_D2"),
+ STM32_FUNCTION(5, "I2C2_SDA"),
+ STM32_FUNCTION(7, "SAI1_FS_A"),
+ STM32_FUNCTION(8, "USART6_CTS_NSS USART_BOOT6_CTS_NSS"),
+ STM32_FUNCTION(11, "SDMMC3_CK"),
+ STM32_FUNCTION(14, "DCMI_D13"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(112, "PH0"),
+ STM32_FUNCTION(0, "GPIOH0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(113, "PH1"),
+ STM32_FUNCTION(0, "GPIOH1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(114, "PH2"),
+ STM32_FUNCTION(0, "GPIOH2"),
+ STM32_FUNCTION(2, "LPTIM1_IN2"),
+ STM32_FUNCTION(10, "QUADSPI_BK2_IO0 QUADSPI_BOOTBK2_IO0"),
+ STM32_FUNCTION(11, "SAI2_SCK_B"),
+ STM32_FUNCTION(12, "ETH_GMII_CRS ETH_MII_CRS"),
+ STM32_FUNCTION(15, "LCD_R0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(115, "PH3"),
+ STM32_FUNCTION(0, "GPIOH3"),
+ STM32_FUNCTION(4, "DFSDM_CK4"),
+ STM32_FUNCTION(10, "QUADSPI_BK2_IO1 QUADSPI_BOOTBK2_IO1"),
+ STM32_FUNCTION(11, "SAI2_MCLK_B"),
+ STM32_FUNCTION(12, "ETH_GMII_COL ETH_MII_COL"),
+ STM32_FUNCTION(15, "LCD_R1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(116, "PH4"),
+ STM32_FUNCTION(0, "GPIOH4"),
+ STM32_FUNCTION(5, "I2C2_SCL"),
+ STM32_FUNCTION(10, "LCD_G5"),
+ STM32_FUNCTION(15, "LCD_G4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(117, "PH5"),
+ STM32_FUNCTION(0, "GPIOH5"),
+ STM32_FUNCTION(5, "I2C2_SDA"),
+ STM32_FUNCTION(6, "SPI5_NSS"),
+ STM32_FUNCTION(13, "SAI4_SD_B"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(118, "PH6"),
+ STM32_FUNCTION(0, "GPIOH6"),
+ STM32_FUNCTION(3, "TIM12_CH1"),
+ STM32_FUNCTION(5, "I2C2_SMBA"),
+ STM32_FUNCTION(6, "SPI5_SCK"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD2 ETH_MII_RXD2 ETH_RGMII_RXD2"),
+ STM32_FUNCTION(13, "MDIOS_MDIO"),
+ STM32_FUNCTION(14, "DCMI_D8"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(119, "PH7"),
+ STM32_FUNCTION(0, "GPIOH7"),
+ STM32_FUNCTION(5, "I2C3_SCL"),
+ STM32_FUNCTION(6, "SPI5_MISO"),
+ STM32_FUNCTION(12, "ETH_GMII_RXD3 ETH_MII_RXD3 ETH_RGMII_RXD3"),
+ STM32_FUNCTION(13, "MDIOS_MDC"),
+ STM32_FUNCTION(14, "DCMI_D9"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(120, "PH8"),
+ STM32_FUNCTION(0, "GPIOH8"),
+ STM32_FUNCTION(3, "TIM5_ETR"),
+ STM32_FUNCTION(5, "I2C3_SDA"),
+ STM32_FUNCTION(14, "DCMI_HSYNC"),
+ STM32_FUNCTION(15, "LCD_R2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(121, "PH9"),
+ STM32_FUNCTION(0, "GPIOH9"),
+ STM32_FUNCTION(3, "TIM12_CH2"),
+ STM32_FUNCTION(5, "I2C3_SMBA"),
+ STM32_FUNCTION(14, "DCMI_D0"),
+ STM32_FUNCTION(15, "LCD_R3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(122, "PH10"),
+ STM32_FUNCTION(0, "GPIOH10"),
+ STM32_FUNCTION(3, "TIM5_CH1"),
+ STM32_FUNCTION(5, "I2C4_SMBA"),
+ STM32_FUNCTION(6, "I2C1_SMBA"),
+ STM32_FUNCTION(14, "DCMI_D1"),
+ STM32_FUNCTION(15, "LCD_R4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(123, "PH11"),
+ STM32_FUNCTION(0, "GPIOH11"),
+ STM32_FUNCTION(3, "TIM5_CH2"),
+ STM32_FUNCTION(5, "I2C4_SCL"),
+ STM32_FUNCTION(6, "I2C1_SCL"),
+ STM32_FUNCTION(14, "DCMI_D2"),
+ STM32_FUNCTION(15, "LCD_R5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(124, "PH12"),
+ STM32_FUNCTION(0, "GPIOH12"),
+ STM32_FUNCTION(1, "HDP2"),
+ STM32_FUNCTION(3, "TIM5_CH3"),
+ STM32_FUNCTION(5, "I2C4_SDA"),
+ STM32_FUNCTION(6, "I2C1_SDA"),
+ STM32_FUNCTION(14, "DCMI_D3"),
+ STM32_FUNCTION(15, "LCD_R6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(125, "PH13"),
+ STM32_FUNCTION(0, "GPIOH13"),
+ STM32_FUNCTION(4, "TIM8_CH1N"),
+ STM32_FUNCTION(9, "UART4_TX"),
+ STM32_FUNCTION(10, "CAN1_TX"),
+ STM32_FUNCTION(15, "LCD_G2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(126, "PH14"),
+ STM32_FUNCTION(0, "GPIOH14"),
+ STM32_FUNCTION(4, "TIM8_CH2N"),
+ STM32_FUNCTION(9, "UART4_RX"),
+ STM32_FUNCTION(10, "CAN1_RX"),
+ STM32_FUNCTION(14, "DCMI_D4"),
+ STM32_FUNCTION(15, "LCD_G3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(127, "PH15"),
+ STM32_FUNCTION(0, "GPIOH15"),
+ STM32_FUNCTION(4, "TIM8_CH3N"),
+ STM32_FUNCTION(10, "CAN1_TXFD"),
+ STM32_FUNCTION(14, "DCMI_D11"),
+ STM32_FUNCTION(15, "LCD_G4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(128, "PI0"),
+ STM32_FUNCTION(0, "GPIOI0"),
+ STM32_FUNCTION(3, "TIM5_CH4"),
+ STM32_FUNCTION(6, "SPI2_NSS I2S2_WS"),
+ STM32_FUNCTION(10, "CAN1_RXFD"),
+ STM32_FUNCTION(14, "DCMI_D13"),
+ STM32_FUNCTION(15, "LCD_G5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(129, "PI1"),
+ STM32_FUNCTION(0, "GPIOI1"),
+ STM32_FUNCTION(4, "TIM8_BKIN2"),
+ STM32_FUNCTION(6, "SPI2_SCK I2S2_CK"),
+ STM32_FUNCTION(14, "DCMI_D8"),
+ STM32_FUNCTION(15, "LCD_G6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(130, "PI2"),
+ STM32_FUNCTION(0, "GPIOI2"),
+ STM32_FUNCTION(4, "TIM8_CH4"),
+ STM32_FUNCTION(6, "SPI2_MISO I2S2_SDI"),
+ STM32_FUNCTION(14, "DCMI_D9"),
+ STM32_FUNCTION(15, "LCD_G7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(131, "PI3"),
+ STM32_FUNCTION(0, "GPIOI3"),
+ STM32_FUNCTION(4, "TIM8_ETR"),
+ STM32_FUNCTION(6, "SPI2_MOSI I2S2_SDO"),
+ STM32_FUNCTION(14, "DCMI_D10"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(132, "PI4"),
+ STM32_FUNCTION(0, "GPIOI4"),
+ STM32_FUNCTION(4, "TIM8_BKIN"),
+ STM32_FUNCTION(11, "SAI2_MCLK_A"),
+ STM32_FUNCTION(14, "DCMI_D5"),
+ STM32_FUNCTION(15, "LCD_B4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(133, "PI5"),
+ STM32_FUNCTION(0, "GPIOI5"),
+ STM32_FUNCTION(4, "TIM8_CH1"),
+ STM32_FUNCTION(11, "SAI2_SCK_A"),
+ STM32_FUNCTION(14, "DCMI_VSYNC"),
+ STM32_FUNCTION(15, "LCD_B5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(134, "PI6"),
+ STM32_FUNCTION(0, "GPIOI6"),
+ STM32_FUNCTION(4, "TIM8_CH2"),
+ STM32_FUNCTION(11, "SAI2_SD_A"),
+ STM32_FUNCTION(14, "DCMI_D6"),
+ STM32_FUNCTION(15, "LCD_B6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(135, "PI7"),
+ STM32_FUNCTION(0, "GPIOI7"),
+ STM32_FUNCTION(4, "TIM8_CH3"),
+ STM32_FUNCTION(11, "SAI2_FS_A"),
+ STM32_FUNCTION(14, "DCMI_D7"),
+ STM32_FUNCTION(15, "LCD_B7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(136, "PI8"),
+ STM32_FUNCTION(0, "GPIOI8"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(137, "PI9"),
+ STM32_FUNCTION(0, "GPIOI9"),
+ STM32_FUNCTION(1, "HDP1"),
+ STM32_FUNCTION(9, "UART4_RX"),
+ STM32_FUNCTION(10, "CAN1_RX"),
+ STM32_FUNCTION(15, "LCD_VSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(138, "PI10"),
+ STM32_FUNCTION(0, "GPIOI10"),
+ STM32_FUNCTION(1, "HDP0"),
+ STM32_FUNCTION(9, "USART3_CTS_NSS USART_BOOT3_CTS_NSS"),
+ STM32_FUNCTION(10, "CAN1_RXFD"),
+ STM32_FUNCTION(12, "ETH_GMII_RX_ER ETH_MII_RX_ER"),
+ STM32_FUNCTION(15, "LCD_HSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(139, "PI11"),
+ STM32_FUNCTION(0, "GPIOI11"),
+ STM32_FUNCTION(1, "MCO1"),
+ STM32_FUNCTION(6, "I2S_CKIN"),
+ STM32_FUNCTION(10, "LCD_G6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(140, "PI12"),
+ STM32_FUNCTION(0, "GPIOI12"),
+ STM32_FUNCTION(1, "TRACED0"),
+ STM32_FUNCTION(3, "HDP0"),
+ STM32_FUNCTION(15, "LCD_HSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(141, "PI13"),
+ STM32_FUNCTION(0, "GPIOI13"),
+ STM32_FUNCTION(1, "TRACED1"),
+ STM32_FUNCTION(3, "HDP1"),
+ STM32_FUNCTION(15, "LCD_VSYNC"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(142, "PI14"),
+ STM32_FUNCTION(0, "GPIOI14"),
+ STM32_FUNCTION(1, "TRACECLK"),
+ STM32_FUNCTION(15, "LCD_CLK"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(143, "PI15"),
+ STM32_FUNCTION(0, "GPIOI15"),
+ STM32_FUNCTION(10, "LCD_G2"),
+ STM32_FUNCTION(15, "LCD_R0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(144, "PJ0"),
+ STM32_FUNCTION(0, "GPIOJ0"),
+ STM32_FUNCTION(1, "TRACED8"),
+ STM32_FUNCTION(10, "LCD_R7"),
+ STM32_FUNCTION(15, "LCD_R1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(145, "PJ1"),
+ STM32_FUNCTION(0, "GPIOJ1"),
+ STM32_FUNCTION(1, "TRACED9"),
+ STM32_FUNCTION(15, "LCD_R2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(146, "PJ2"),
+ STM32_FUNCTION(0, "GPIOJ2"),
+ STM32_FUNCTION(1, "TRACED10"),
+ STM32_FUNCTION(14, "DSI_TE"),
+ STM32_FUNCTION(15, "LCD_R3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(147, "PJ3"),
+ STM32_FUNCTION(0, "GPIOJ3"),
+ STM32_FUNCTION(1, "TRACED11"),
+ STM32_FUNCTION(15, "LCD_R4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(148, "PJ4"),
+ STM32_FUNCTION(0, "GPIOJ4"),
+ STM32_FUNCTION(1, "TRACED12"),
+ STM32_FUNCTION(15, "LCD_R5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(149, "PJ5"),
+ STM32_FUNCTION(0, "GPIOJ5"),
+ STM32_FUNCTION(1, "TRACED2"),
+ STM32_FUNCTION(3, "HDP2"),
+ STM32_FUNCTION(15, "LCD_R6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(150, "PJ6"),
+ STM32_FUNCTION(0, "GPIOJ6"),
+ STM32_FUNCTION(1, "TRACED3"),
+ STM32_FUNCTION(3, "HDP3"),
+ STM32_FUNCTION(4, "TIM8_CH2"),
+ STM32_FUNCTION(15, "LCD_R7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(151, "PJ7"),
+ STM32_FUNCTION(0, "GPIOJ7"),
+ STM32_FUNCTION(1, "TRACED13"),
+ STM32_FUNCTION(4, "TIM8_CH2N"),
+ STM32_FUNCTION(15, "LCD_G0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(152, "PJ8"),
+ STM32_FUNCTION(0, "GPIOJ8"),
+ STM32_FUNCTION(1, "TRACED14"),
+ STM32_FUNCTION(2, "TIM1_CH3N"),
+ STM32_FUNCTION(4, "TIM8_CH1"),
+ STM32_FUNCTION(9, "UART8_TX"),
+ STM32_FUNCTION(15, "LCD_G1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(153, "PJ9"),
+ STM32_FUNCTION(0, "GPIOJ9"),
+ STM32_FUNCTION(1, "TRACED15"),
+ STM32_FUNCTION(2, "TIM1_CH3"),
+ STM32_FUNCTION(4, "TIM8_CH1N"),
+ STM32_FUNCTION(9, "UART8_RX"),
+ STM32_FUNCTION(15, "LCD_G2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(154, "PJ10"),
+ STM32_FUNCTION(0, "GPIOJ10"),
+ STM32_FUNCTION(2, "TIM1_CH2N"),
+ STM32_FUNCTION(4, "TIM8_CH2"),
+ STM32_FUNCTION(6, "SPI5_MOSI"),
+ STM32_FUNCTION(15, "LCD_G3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(155, "PJ11"),
+ STM32_FUNCTION(0, "GPIOJ11"),
+ STM32_FUNCTION(2, "TIM1_CH2"),
+ STM32_FUNCTION(4, "TIM8_CH2N"),
+ STM32_FUNCTION(6, "SPI5_MISO"),
+ STM32_FUNCTION(15, "LCD_G4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(156, "PJ12"),
+ STM32_FUNCTION(0, "GPIOJ12"),
+ STM32_FUNCTION(10, "LCD_G3"),
+ STM32_FUNCTION(15, "LCD_B0"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(157, "PJ13"),
+ STM32_FUNCTION(0, "GPIOJ13"),
+ STM32_FUNCTION(10, "LCD_G4"),
+ STM32_FUNCTION(15, "LCD_B1"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(158, "PJ14"),
+ STM32_FUNCTION(0, "GPIOJ14"),
+ STM32_FUNCTION(15, "LCD_B2"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(159, "PJ15"),
+ STM32_FUNCTION(0, "GPIOJ15"),
+ STM32_FUNCTION(15, "LCD_B3"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(160, "PK0"),
+ STM32_FUNCTION(0, "GPIOK0"),
+ STM32_FUNCTION(2, "TIM1_CH1N"),
+ STM32_FUNCTION(4, "TIM8_CH3"),
+ STM32_FUNCTION(6, "SPI5_SCK"),
+ STM32_FUNCTION(15, "LCD_G5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(161, "PK1"),
+ STM32_FUNCTION(0, "GPIOK1"),
+ STM32_FUNCTION(1, "TRACED4"),
+ STM32_FUNCTION(2, "TIM1_CH1"),
+ STM32_FUNCTION(3, "HDP4"),
+ STM32_FUNCTION(4, "TIM8_CH3N"),
+ STM32_FUNCTION(6, "SPI5_NSS"),
+ STM32_FUNCTION(15, "LCD_G6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(162, "PK2"),
+ STM32_FUNCTION(0, "GPIOK2"),
+ STM32_FUNCTION(1, "TRACED5"),
+ STM32_FUNCTION(2, "TIM1_BKIN"),
+ STM32_FUNCTION(3, "HDP5"),
+ STM32_FUNCTION(4, "TIM8_BKIN"),
+ STM32_FUNCTION(15, "LCD_G7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(163, "PK3"),
+ STM32_FUNCTION(0, "GPIOK3"),
+ STM32_FUNCTION(15, "LCD_B4"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(164, "PK4"),
+ STM32_FUNCTION(0, "GPIOK4"),
+ STM32_FUNCTION(15, "LCD_B5"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(165, "PK5"),
+ STM32_FUNCTION(0, "GPIOK5"),
+ STM32_FUNCTION(1, "TRACED6"),
+ STM32_FUNCTION(3, "HDP6"),
+ STM32_FUNCTION(15, "LCD_B6"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(166, "PK6"),
+ STM32_FUNCTION(0, "GPIOK6"),
+ STM32_FUNCTION(1, "TRACED7"),
+ STM32_FUNCTION(3, "HDP7"),
+ STM32_FUNCTION(15, "LCD_B7"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(167, "PK7"),
+ STM32_FUNCTION(0, "GPIOK7"),
+ STM32_FUNCTION(15, "LCD_DE"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+};
+
+static const struct stm32_desc_pin stm32mp157_z_pins[] = {
+ STM32_PIN(
+ PINCTRL_PIN(400, "PZ0"),
+ STM32_FUNCTION(0, "GPIOZ0"),
+ STM32_FUNCTION(3, "I2C6_SCL"),
+ STM32_FUNCTION(4, "I2C2_SCL"),
+ STM32_FUNCTION(6, "SPI1_SCK I2S1_CK"),
+ STM32_FUNCTION(8, "USART1_CK"),
+ STM32_FUNCTION(9, "SPI6_SCK"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(401, "PZ1"),
+ STM32_FUNCTION(0, "GPIOZ1"),
+ STM32_FUNCTION(3, "I2C6_SDA"),
+ STM32_FUNCTION(4, "I2C2_SDA"),
+ STM32_FUNCTION(5, "I2C5_SDA"),
+ STM32_FUNCTION(6, "SPI1_MISO I2S1_SDI"),
+ STM32_FUNCTION(7, "I2C4_SDA"),
+ STM32_FUNCTION(8, "USART1_RX"),
+ STM32_FUNCTION(9, "SPI6_MISO"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(402, "PZ2"),
+ STM32_FUNCTION(0, "GPIOZ2"),
+ STM32_FUNCTION(3, "I2C6_SCL"),
+ STM32_FUNCTION(4, "I2C2_SCL"),
+ STM32_FUNCTION(5, "I2C5_SMBA"),
+ STM32_FUNCTION(6, "SPI1_MOSI I2S1_SDO"),
+ STM32_FUNCTION(7, "I2C4_SMBA"),
+ STM32_FUNCTION(8, "USART1_TX"),
+ STM32_FUNCTION(9, "SPI6_MOSI"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(403, "PZ3"),
+ STM32_FUNCTION(0, "GPIOZ3"),
+ STM32_FUNCTION(3, "I2C6_SDA"),
+ STM32_FUNCTION(4, "I2C2_SDA"),
+ STM32_FUNCTION(5, "I2C5_SDA"),
+ STM32_FUNCTION(6, "SPI1_NSS I2S1_WS"),
+ STM32_FUNCTION(7, "I2C4_SDA"),
+ STM32_FUNCTION(8, "USART1_CTS_NSS"),
+ STM32_FUNCTION(9, "SPI6_NSS"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(404, "PZ4"),
+ STM32_FUNCTION(0, "GPIOZ4"),
+ STM32_FUNCTION(3, "I2C6_SCL"),
+ STM32_FUNCTION(4, "I2C2_SCL"),
+ STM32_FUNCTION(5, "I2C5_SCL"),
+ STM32_FUNCTION(7, "I2C4_SCL"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(405, "PZ5"),
+ STM32_FUNCTION(0, "GPIOZ5"),
+ STM32_FUNCTION(3, "I2C6_SDA"),
+ STM32_FUNCTION(4, "I2C2_SDA"),
+ STM32_FUNCTION(5, "I2C5_SDA"),
+ STM32_FUNCTION(7, "I2C4_SDA"),
+ STM32_FUNCTION(8, "USART1_RTS"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(406, "PZ6"),
+ STM32_FUNCTION(0, "GPIOZ6"),
+ STM32_FUNCTION(3, "I2C6_SCL"),
+ STM32_FUNCTION(4, "I2C2_SCL"),
+ STM32_FUNCTION(5, "USART1_CK"),
+ STM32_FUNCTION(6, "I2S1_MCK"),
+ STM32_FUNCTION(7, "I2C4_SMBA"),
+ STM32_FUNCTION(8, "USART1_RX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+ STM32_PIN(
+ PINCTRL_PIN(407, "PZ7"),
+ STM32_FUNCTION(0, "GPIOZ7"),
+ STM32_FUNCTION(3, "I2C6_SDA"),
+ STM32_FUNCTION(4, "I2C2_SDA"),
+ STM32_FUNCTION(8, "USART1_TX"),
+ STM32_FUNCTION(16, "EVENTOUT"),
+ STM32_FUNCTION(17, "ANALOG")
+ ),
+};
+
+static struct stm32_pinctrl_match_data stm32mp157_match_data = {
+ .pins = stm32mp157_pins,
+ .npins = ARRAY_SIZE(stm32mp157_pins),
+};
+
+static struct stm32_pinctrl_match_data stm32mp157_z_match_data = {
+ .pins = stm32mp157_z_pins,
+ .npins = ARRAY_SIZE(stm32mp157_z_pins),
+};
+
+static const struct of_device_id stm32mp157_pctrl_match[] = {
+ {
+ .compatible = "st,stm32mp157-pinctrl",
+ .data = &stm32mp157_match_data,
+ },
+ {
+ .compatible = "st,stm32mp157-z-pinctrl",
+ .data = &stm32mp157_z_match_data,
+ },
+ { }
+};
+
+static struct platform_driver stm32mp157_pinctrl_driver = {
+ .probe = stm32_pctl_probe,
+ .driver = {
+ .name = "stm32mp157-pinctrl",
+ .of_match_table = stm32mp157_pctrl_match,
+ },
+};
+
+static int __init stm32mp157_pinctrl_init(void)
+{
+ return platform_driver_register(&stm32mp157_pinctrl_driver);
+}
+arch_initcall(stm32mp157_pinctrl_init);
--
2.7.4
^ permalink raw reply related
* [PATCH 2/6] ARM: stm32: add initial support for STM32MP157
From: Ludovic Barre @ 2017-12-08 14:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512742277-28205-1-git-send-email-ludovic.Barre@st.com>
From: Ludovic Barre <ludovic.barre@st.com>
This patch adds initial support of STM32MP157 microprocessor (MPU)
based on Arm Cortex-A7. Under new ARCH_STM32_MPU flag we select the
needed Cortex-A infrastructure (like gic, timer,...)
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
Documentation/arm/stm32/stm32mp157-overview.txt | 12 ++++++++++++
Documentation/devicetree/bindings/arm/stm32.txt | 1 +
arch/arm/mach-stm32/Kconfig | 22 ++++++++++++++++++++--
arch/arm/mach-stm32/Makefile | 1 +
arch/arm/mach-stm32/board-mpu-dt.c | 16 ++++++++++++++++
5 files changed, 50 insertions(+), 2 deletions(-)
create mode 100644 Documentation/arm/stm32/stm32mp157-overview.txt
create mode 100644 arch/arm/mach-stm32/board-mpu-dt.c
diff --git a/Documentation/arm/stm32/stm32mp157-overview.txt b/Documentation/arm/stm32/stm32mp157-overview.txt
new file mode 100644
index 0000000..8a3e7cb
--- /dev/null
+++ b/Documentation/arm/stm32/stm32mp157-overview.txt
@@ -0,0 +1,12 @@
+ STM32MP157 Overview
+ ===================
+
+ Introduction
+ ------------
+ The STM32MP157 is a Cortex-A MPU aimed at various applications.
+ It features:
+ - Dual core Cortex-A7 application core
+ - 2D/3D image composition with GPU
+ - Standard memories interface support
+ - Standard connectivity, widely inherited from the STM32 MCU family
+ - Comprehensive security support
diff --git a/Documentation/devicetree/bindings/arm/stm32.txt b/Documentation/devicetree/bindings/arm/stm32.txt
index 05762b0..6808ed9 100644
--- a/Documentation/devicetree/bindings/arm/stm32.txt
+++ b/Documentation/devicetree/bindings/arm/stm32.txt
@@ -7,3 +7,4 @@ using one of the following compatible strings:
st,stm32f469
st,stm32f746
st,stm32h743
+ st,stm32mp157
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index c8059ea..2b227c7 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -1,12 +1,12 @@
menuconfig ARCH_STM32
- bool "STMicrolectronics STM32 family" if ARM_SINGLE_ARMV7M
+ bool "STMicrolectronics STM32 family" if ARM_SINGLE_ARMV7M || ARCH_MULTI_V7
select ARCH_HAS_RESET_CONTROLLER
select CLKSRC_STM32
select PINCTRL
select RESET_CONTROLLER
select STM32_EXTI
help
- Support for STMicroelectronics STM32 MCU family
+ Support for STMicroelectronics STM32 MCU/MPU family
if ARCH_STM32
@@ -40,4 +40,22 @@ config MACH_STM32H743
endif
+if ARCH_MULTI_V7
+
+config ARCH_STM32_MPU
+ bool "STMicrolectronics STM32 MPU"
+ default y
+ select ARM_GIC
+ select HAVE_ARM_ARCH_TIMER
+ select ARM_PSCI
+ help
+ Support for STMicroelectronics STM32 Microprocessors.
+
+config MACH_STM32MP157
+ bool "STMicrolectronics STM32MP157"
+ depends on ARCH_STM32_MPU
+ default y
+
+endif
+
endif
diff --git a/arch/arm/mach-stm32/Makefile b/arch/arm/mach-stm32/Makefile
index 90c1b71..a405eb6 100644
--- a/arch/arm/mach-stm32/Makefile
+++ b/arch/arm/mach-stm32/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_ARCH_STM32_MCU) += board-mcu-dt.o
+obj-$(CONFIG_ARCH_STM32_MPU) += board-mpu-dt.o
diff --git a/arch/arm/mach-stm32/board-mpu-dt.c b/arch/arm/mach-stm32/board-mpu-dt.c
new file mode 100644
index 0000000..9e18405
--- /dev/null
+++ b/arch/arm/mach-stm32/board-mpu-dt.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <asm/mach/arch.h>
+#include <linux/of_platform.h>
+
+static const char *const stm32mp_compat[] __initconst = {
+ "st,stm32mp157",
+ NULL
+};
+
+DT_MACHINE_START(STM32MPDT, "STM32 MP (Device Tree Support)")
+ .dt_compat = stm32mp_compat,
+MACHINE_END
--
2.7.4
^ permalink raw reply related
* [PATCH 1/6] ARM: stm32: prepare stm32 family to welcome armv7 architecture
From: Ludovic Barre @ 2017-12-08 14:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512742277-28205-1-git-send-email-ludovic.Barre@st.com>
From: Ludovic Barre <ludovic.barre@st.com>
This patch prepares the STM32 machine for the integration of Cortex-A
based microprocessor (MPU), on top of the existing Cortex-M
microcontroller family (MCU). Since both MCUs and MPUs are sharing
common hardware blocks we can keep using ARCH_STM32 flag for most of
them. If a hardware block is specific to one family we can use either
ARCH_STM32_MCU or ARCH_STM32_MPU flag.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
Documentation/arm/stm32/overview.txt | 21 +++++++--------
arch/arm/mach-stm32/Kconfig | 30 +++++++++++++++-------
arch/arm/mach-stm32/Makefile | 2 +-
arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} | 0
4 files changed, 33 insertions(+), 20 deletions(-)
rename arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} (100%)
diff --git a/Documentation/arm/stm32/overview.txt b/Documentation/arm/stm32/overview.txt
index a03b035..384cc7f 100644
--- a/Documentation/arm/stm32/overview.txt
+++ b/Documentation/arm/stm32/overview.txt
@@ -4,17 +4,17 @@
Introduction
------------
- The STMicroelectronics family of Cortex-M based MCUs are supported by the
- 'STM32' platform of ARM Linux. Currently only the STM32F429 (Cortex-M4)
- and STM32F746 (Cortex-M7) are supported.
-
+ The STMicroelectronics STM32 family of Cortex-A microprocessors (MPUs) and
+ Cortex-M microcontrollers (MCUs) are supported by the 'STM32' platform of
+ ARM Linux.
Configuration
-------------
- A generic configuration is provided for STM32 family, and can be used as the
- default by
+ For MCUs, use the provided default configuration:
make stm32_defconfig
+ For MPUs, use multi_v7 configuration:
+ make multi_v7_defconfig
Layout
------
@@ -22,12 +22,13 @@ Layout
All the files for multiple machine families are located in the platform code
contained in arch/arm/mach-stm32
- There is a generic board board-dt.c in the mach folder which support
- Flattened Device Tree, which means, it works with any compatible board with
- Device Trees.
-
+ There are generic boards board-mcu-dt.c and board-mpu-dt.c files in the mach
+ folder which support Flattened Device Tree, which means, they work with any
+ compatible board with Device Trees.
Document Author
---------------
Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ Ludovic Barre <ludovic.barre@st.com>
+ Gerald Baeza <gerald.baeza@st.com>
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index 0d1889b..c8059ea 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -1,31 +1,43 @@
-config ARCH_STM32
- bool "STMicrolectronics STM32"
- depends on ARM_SINGLE_ARMV7M
+menuconfig ARCH_STM32
+ bool "STMicrolectronics STM32 family" if ARM_SINGLE_ARMV7M
select ARCH_HAS_RESET_CONTROLLER
- select ARMV7M_SYSTICK
select CLKSRC_STM32
select PINCTRL
select RESET_CONTROLLER
select STM32_EXTI
help
- Support for STMicroelectronics STM32 processors.
+ Support for STMicroelectronics STM32 MCU family
+
+if ARCH_STM32
+
+if ARM_SINGLE_ARMV7M
+
+config ARCH_STM32_MCU
+ bool "STMicrolectronics STM32 MCU"
+ select ARMV7M_SYSTICK
+ help
+ Support for STMicroelectronics STM32 Microcontrollers.
config MACH_STM32F429
bool "STMicrolectronics STM32F429"
- depends on ARCH_STM32
+ depends on ARCH_STM32_MCU
default y
config MACH_STM32F469
bool "STMicrolectronics STM32F469"
- depends on ARCH_STM32
+ depends on ARCH_STM32_MCU
default y
config MACH_STM32F746
bool "STMicrolectronics STM32F746"
- depends on ARCH_STM32
+ depends on ARCH_STM32_MCU
default y
config MACH_STM32H743
bool "STMicrolectronics STM32H743"
- depends on ARCH_STM32
+ depends on ARCH_STM32_MCU
default y
+
+endif
+
+endif
diff --git a/arch/arm/mach-stm32/Makefile b/arch/arm/mach-stm32/Makefile
index bd0b7b5..90c1b71 100644
--- a/arch/arm/mach-stm32/Makefile
+++ b/arch/arm/mach-stm32/Makefile
@@ -1 +1 @@
-obj-y += board-dt.o
+obj-$(CONFIG_ARCH_STM32_MCU) += board-mcu-dt.o
diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-mcu-dt.c
similarity index 100%
rename from arch/arm/mach-stm32/board-dt.c
rename to arch/arm/mach-stm32/board-mcu-dt.c
--
2.7.4
^ permalink raw reply related
* [PATCH 0/6] ARM: stm32: add initial STM32MPU support
From: Ludovic Barre @ 2017-12-08 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Ludovic Barre <ludovic.barre@st.com>
This patch series extends the existing STM32 microcontrollers (MCUs)
family to microprocessors (MPUs). The MPU platform (based on
Arm Cortex-A) is a continuation of the MCU one (based on Arm
Cortex-M) in that it shares a wide number of hardware blocks.
Ludovic Barre (6):
ARM: stm32: prepare stm32 family to welcome armv7 architecture
ARM: stm32: add initial support for STM32MP157
pinctrl: stm32: Add STM32MP157 MPU support
ARM: configs: multi_v7: add stm32 support
ARM: dts: stm32: add stm32mp157c initial support
ARM: dts: stm32: add initial support of stm32mp157c eval board
Documentation/arm/stm32/overview.txt | 21 +-
Documentation/arm/stm32/stm32mp157-overview.txt | 12 +
Documentation/devicetree/bindings/arm/stm32.txt | 1 +
.../bindings/pinctrl/st,stm32-pinctrl.txt | 2 +
arch/arm/boot/dts/Makefile | 5 +-
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 185 ++
arch/arm/boot/dts/stm32mp157c-ed1.dts | 29 +
arch/arm/boot/dts/stm32mp157c-ev1.dts | 19 +
arch/arm/boot/dts/stm32mp157c.dtsi | 139 ++
arch/arm/configs/multi_v7_defconfig | 2 +
arch/arm/mach-stm32/Kconfig | 48 +-
arch/arm/mach-stm32/Makefile | 3 +-
arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} | 0
arch/arm/mach-stm32/board-mpu-dt.c | 16 +
drivers/pinctrl/stm32/Kconfig | 6 +
drivers/pinctrl/stm32/Makefile | 1 +
drivers/pinctrl/stm32/pinctrl-stm32mp157.c | 2188 ++++++++++++++++++++
17 files changed, 2656 insertions(+), 21 deletions(-)
create mode 100644 Documentation/arm/stm32/stm32mp157-overview.txt
create mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp157c-ed1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-ev1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c.dtsi
rename arch/arm/mach-stm32/{board-dt.c => board-mcu-dt.c} (100%)
create mode 100644 arch/arm/mach-stm32/board-mpu-dt.c
create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32mp157.c
--
2.7.4
^ permalink raw reply
* [PATCH v9 4/6] clocksource: stm32: add clocksource support
From: Daniel Lezcano @ 2017-12-08 14:08 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CA+M3ks6uWUQqD-c_FWETDLp097AfUEVs1srpH_C7kK-X8ADQ1Q@mail.gmail.com>
On 08/12/2017 15:04, Benjamin Gaignard wrote:
> 2017-12-08 14:46 GMT+01:00 Daniel Lezcano <daniel.lezcano@linaro.org>:
>> On 08/12/2017 12:32, Benjamin Gaignard wrote:
>>> The stm32 timer hardware is currently only used as a clock event device,
>>> but it can be utilized as a clocksource as well.
>>>
>>> Implement this by enabling the free running counter in the hardware block
>>> and converting the clock event part from a count down event timer to a
>>> comparator based timer.
>>
>>
>> Split this patch in two:
>> - periodic support
>> - clocksource support
>
> No because the way of implementing periodic support depend of how clocksource
> part is implemented on the hardware.
> I don't want to code functions that I will completely remove just after
Sorry, I don't get it. Can you elaborate please ?
--
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply
* [PATCH v9 4/6] clocksource: stm32: add clocksource support
From: Benjamin Gaignard @ 2017-12-08 14:04 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <ac396fdb-1658-d2f3-bd92-b2b9fe04f201@linaro.org>
2017-12-08 14:46 GMT+01:00 Daniel Lezcano <daniel.lezcano@linaro.org>:
> On 08/12/2017 12:32, Benjamin Gaignard wrote:
>> The stm32 timer hardware is currently only used as a clock event device,
>> but it can be utilized as a clocksource as well.
>>
>> Implement this by enabling the free running counter in the hardware block
>> and converting the clock event part from a count down event timer to a
>> comparator based timer.
>
>
> Split this patch in two:
> - periodic support
> - clocksource support
No because the way of implementing periodic support depend of how clocksource
part is implemented on the hardware.
I don't want to code functions that I will completely remove just after
>
>
>
>
> --
> <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs
>
> Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog
>
^ permalink raw reply
* [PATCH 1/1] dt-bindings: arm: document supported STM32 SoC family
From: Ludovic Barre @ 2017-12-08 13:56 UTC (permalink / raw)
To: linux-arm-kernel
From: Ludovic Barre <ludovic.barre@st.com>
This adds a list of supported STM32 SoC bindings.
Signed-off-by: Gwenael Treuveur <gwenael.treuveur@st.com>
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
Documentation/devicetree/bindings/arm/stm32.txt | 9 +++++++++
1 file changed, 9 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/stm32.txt
diff --git a/Documentation/devicetree/bindings/arm/stm32.txt b/Documentation/devicetree/bindings/arm/stm32.txt
new file mode 100644
index 0000000..05762b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/stm32.txt
@@ -0,0 +1,9 @@
+STMicroelectronics STM32 Platforms Device Tree Bindings
+
+Each device tree must specify which STM32 SoC it uses,
+using one of the following compatible strings:
+
+ st,stm32f429
+ st,stm32f469
+ st,stm32f746
+ st,stm32h743
--
2.7.4
^ permalink raw reply related
* [PATCH V3] ACPI / GED: unregister interrupts during shutdown
From: Rafael J. Wysocki @ 2017-12-08 13:54 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512708033-28180-1-git-send-email-okaya@codeaurora.org>
On Fri, Dec 8, 2017 at 5:40 AM, Sinan Kaya <okaya@codeaurora.org> wrote:
> Some GED interrupts could be pending by the time we are doing a reboot.
>
> Even though GED driver uses devm_request_irq() to register the interrupt
> handler, the handler is not being freed on time during a shutdown since
> the driver is missing a shutdown callback.
>
> If the ACPI handler is no longer available, this causes an interrupt
> storm and delays shutdown.
>
> 1. Don't use devm family of functions for IRQ registration/free
> 2. Keep track of the events since free_irq() requires the dev_id parameter
> passed into the request_irq() function.
> 3. Call free_irq() on both remove and shutdown explicitly.
>
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> ---
> drivers/acpi/evged.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++------
> 1 file changed, 49 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/acpi/evged.c b/drivers/acpi/evged.c
> index 46f0603..38cb00e 100644
> --- a/drivers/acpi/evged.c
> +++ b/drivers/acpi/evged.c
> @@ -49,6 +49,11 @@
>
> #define MODULE_NAME "acpi-ged"
>
> +struct acpi_ged_device {
> + struct device *dev;
> + struct list_head event_list;
> +};
> +
> struct acpi_ged_event {
> struct list_head node;
> struct device *dev;
> @@ -76,7 +81,8 @@ static acpi_status acpi_ged_request_interrupt(struct acpi_resource *ares,
> unsigned int irq;
> unsigned int gsi;
> unsigned int irqflags = IRQF_ONESHOT;
> - struct device *dev = context;
> + struct acpi_ged_device *geddev = context;
> + struct device *dev = geddev->dev;
> acpi_handle handle = ACPI_HANDLE(dev);
> acpi_handle evt_handle;
> struct resource r;
> @@ -102,8 +108,6 @@ static acpi_status acpi_ged_request_interrupt(struct acpi_resource *ares,
> return AE_ERROR;
> }
>
> - dev_info(dev, "GED listening GSI %u @ IRQ %u\n", gsi, irq);
> -
> event = devm_kzalloc(dev, sizeof(*event), GFP_KERNEL);
> if (!event)
> return AE_ERROR;
> @@ -116,26 +120,63 @@ static acpi_status acpi_ged_request_interrupt(struct acpi_resource *ares,
> if (r.flags & IORESOURCE_IRQ_SHAREABLE)
> irqflags |= IRQF_SHARED;
>
> - if (devm_request_threaded_irq(dev, irq, NULL, acpi_ged_irq_handler,
> - irqflags, "ACPI:Ged", event)) {
> + if (request_threaded_irq(irq, NULL, acpi_ged_irq_handler,
> + irqflags, "ACPI:Ged", event)) {
> dev_err(dev, "failed to setup event handler for irq %u\n", irq);
> return AE_ERROR;
> }
>
> + dev_dbg(dev, "GED listening GSI %u @ IRQ %u\n", gsi, irq);
> + list_add_tail(&event->node, &geddev->event_list);
> return AE_OK;
> }
>
> static int ged_probe(struct platform_device *pdev)
> {
> + struct acpi_ged_device *geddev;
> acpi_status acpi_ret;
>
> + geddev = devm_kzalloc(&pdev->dev, sizeof(*geddev), GFP_KERNEL);
> + if (!geddev)
> + return -ENOMEM;
> +
> + geddev->dev = &pdev->dev;
> + INIT_LIST_HEAD(&geddev->event_list);
> acpi_ret = acpi_walk_resources(ACPI_HANDLE(&pdev->dev), "_CRS",
> - acpi_ged_request_interrupt, &pdev->dev);
> + acpi_ged_request_interrupt, geddev);
> if (ACPI_FAILURE(acpi_ret)) {
> dev_err(&pdev->dev, "unable to parse the _CRS record\n");
> return -EINVAL;
> }
> + platform_set_drvdata(pdev, geddev);
> +
> + return 0;
> +}
> +
> +static void ged_cleanup_irq(struct acpi_ged_device *geddev)
> +{
> + struct acpi_ged_event *event, *next;
> +
> + list_for_each_entry_safe(event, next, &geddev->event_list, node) {
> + free_irq(event->irq, event);
> + list_del(&event->node);
> + dev_dbg(geddev->dev, "GED releasing GSI %u @ IRQ %u\n",
> + event->gsi, event->irq);
> + }
> +}
> +
> +static void ged_shutdown(struct platform_device *pdev)
> +{
> + struct acpi_ged_device *geddev = platform_get_drvdata(pdev);
> +
> + ged_cleanup_irq(geddev);
> +}
> +
> +static int ged_remove(struct platform_device *pdev)
> +{
> + struct acpi_ged_device *geddev = platform_get_drvdata(pdev);
>
> + ged_cleanup_irq(geddev);
Do you really need this duplication? You may as well call
ged_shutdown() from here.
And the local variable is redundant too.
I guess it would be better to just fold ged_cleanup_irq() into
ged_shutdown() and call that from ged_remove().
> return 0;
> }
>
> @@ -146,6 +187,8 @@ static int ged_probe(struct platform_device *pdev)
>
> static struct platform_driver ged_driver = {
> .probe = ged_probe,
> + .remove = ged_remove,
> + .shutdown = ged_shutdown,
> .driver = {
> .name = MODULE_NAME,
> .acpi_match_table = ACPI_PTR(ged_acpi_ids),
> --
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox