* [PATCH 13/20] ARM: dts: aspeed: Update license headers
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
In b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier
to files with no license") these files had the GPL-2.0 licence added
automatically. Update them to be GPL 2.0+ in line with other IBM kernel
contributions.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-ast2500-evb.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 2 +-
arch/arm/boot/dts/aspeed-g4.dtsi | 2 +-
arch/arm/boot/dts/aspeed-g5.dtsi | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 602bc10fdaf4..3e6f38e5d5d0 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
#include "aspeed-g5.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index c786bc2f2919..a8f0c046e83e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
#include "aspeed-g4.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 2d7ac577d6b5..9c175832babc 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 030a760696fd..360329eab7c3 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
--
2.14.1
^ permalink raw reply related
* [PATCH 12/20] ARM: dts: aspeed: Remove skeleton.dtsi
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
We don't require it for any of the ASPEED systems.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 1 -
arch/arm/boot/dts/aspeed-g5.dtsi | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b3580f37f507..2d7ac577d6b5 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0
-#include "skeleton.dtsi"
#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 50766f0629f8..030a760696fd 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0
-#include "skeleton.dtsi"
#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
--
2.14.1
^ permalink raw reply related
* [PATCH 11/20] ARM: dts: aspeed: Add LPC Snoop device
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
LPC snoop hardware on the ASPEED BMC, used for monitoring
host I/O port activity.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 7 +++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 6 ++++++
2 files changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index f6fee40c04c0..b3580f37f507 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -236,6 +236,13 @@
status = "disabled";
};
+ lpc_snoop: lpc-snoop at 0 {
+ compatible = "aspeed,ast2500-lpc-snoop";
+ reg = <0x0 0x80>;
+ interrupts = <8>;
+ status = "disabled";
+ };
+
lhc: lhc at 20 {
compatible = "aspeed,ast2500-lhc";
reg = <0x20 0x24 0x48 0x8>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 96a9d2fe3f0d..50766f0629f8 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -287,6 +287,12 @@
status = "disabled";
};
+ lpc_snoop: lpc-snoop at 0 {
+ compatible = "aspeed,ast2500-lpc-snoop";
+ reg = <0x0 0x80>;
+ interrupts = <8>;
+ status = "disabled";
+ };
lhc: lhc at 20 {
compatible = "aspeed,ast2500-lhc";
--
2.14.1
^ permalink raw reply related
* [PATCH 10/20] ARM: dts: aspeed: Add PWM and tachometer node
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 9 +++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 9 +++++++++
2 files changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index fa52a01f50b5..f6fee40c04c0 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -189,6 +189,15 @@
clocks = <&syscon ASPEED_CLK_APB>;
};
+ pwm_tacho: pwm-tacho-controller at 1e786000 {
+ compatible = "aspeed,ast2400-pwm-tacho";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1e786000 0x1000>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ status = "disabled";
+ };
+
vuart: serial at 1e787000 {
compatible = "aspeed,ast2400-vuart";
reg = <0x1e787000 0x40>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 5e6db2aa5c23..96a9d2fe3f0d 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -239,6 +239,15 @@
status = "disabled";
};
+ pwm_tacho: pwm-tacho-controller at 1e786000 {
+ compatible = "aspeed,ast2500-pwm-tacho";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1e786000 0x1000>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ status = "disabled";
+ };
+
vuart: serial at 1e787000 {
compatible = "aspeed,ast2500-vuart";
reg = <0x1e787000 0x40>;
--
2.14.1
^ permalink raw reply related
* [PATCH 09/20] ARM: dts: aspeed: Add clock phandle to GPIO
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
This enables a feature where the driver can debounce inputs.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 1 +
arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index afac0ca0cb10..fa52a01f50b5 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -144,6 +144,7 @@
reg = <0x1e780000 0x1000>;
interrupts = <20>;
gpio-ranges = <&pinctrl 0 0 220>;
+ clocks = <&syscon ASPEED_CLK_APB>;
interrupt-controller;
};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index f3689caf6fe2..5e6db2aa5c23 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -187,6 +187,7 @@
reg = <0x1e780000 0x1000>;
interrupts = <20>;
gpio-ranges = <&pinctrl 0 0 220>;
+ clocks = <&syscon ASPEED_CLK_APB>;
interrupt-controller;
};
--
2.14.1
^ permalink raw reply related
* [PATCH 08/20] ARM: dts: aspeed: Add flash controller clocks
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 2 ++
arch/arm/boot/dts/aspeed-g5.dtsi | 3 +++
2 files changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 2e3666d4fbeb..afac0ca0cb10 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -56,6 +56,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2400-fmc";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
interrupts = <19>;
flash at 0 {
@@ -71,6 +72,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2400-spi";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
flash at 0 {
reg = < 0 >;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 24bb2d16b900..f3689caf6fe2 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -56,6 +56,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-fmc";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
interrupts = <19>;
flash at 0 {
@@ -81,6 +82,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-spi";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
flash at 0 {
reg = < 0 >;
@@ -100,6 +102,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-spi";
+ clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
flash at 0 {
reg = < 0 >;
--
2.14.1
^ permalink raw reply related
* [PATCH 07/20] ARM: dts: aspeed: Add watchdog clocks
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 2 ++
arch/arm/boot/dts/aspeed-g5.dtsi | 3 +++
2 files changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index cf407b4db630..2e3666d4fbeb 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -177,11 +177,13 @@
wdt1: watchdog at 1e785000 {
compatible = "aspeed,ast2400-wdt";
reg = <0x1e785000 0x1c>;
+ clocks = <&syscon ASPEED_CLK_APB>;
};
wdt2: watchdog at 1e785020 {
compatible = "aspeed,ast2400-wdt";
reg = <0x1e785020 0x1c>;
+ clocks = <&syscon ASPEED_CLK_APB>;
};
vuart: serial at 1e787000 {
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index ab26156d6822..24bb2d16b900 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -219,16 +219,19 @@
wdt1: watchdog at 1e785000 {
compatible = "aspeed,ast2500-wdt";
reg = <0x1e785000 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB>;
};
wdt2: watchdog at 1e785020 {
compatible = "aspeed,ast2500-wdt";
reg = <0x1e785020 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB>;
};
wdt3: watchdog at 1e785040 {
compatible = "aspeed,ast2500-wdt";
reg = <0x1e785040 0x20>;
+ clocks = <&syscon ASPEED_CLK_APB>;
status = "disabled";
};
--
2.14.1
^ permalink raw reply related
* [PATCH 06/20] ARM: dts: aspeed: Add MAC clocks
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 2 ++
arch/arm/boot/dts/aspeed-g5.dtsi | 2 ++
2 files changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index c87883a7f250..cf407b4db630 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -91,6 +91,7 @@
compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
reg = <0x1e660000 0x180>;
interrupts = <2>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
status = "disabled";
};
@@ -98,6 +99,7 @@
compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
reg = <0x1e680000 0x180>;
interrupts = <3>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 90bc09d93ea6..ab26156d6822 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -125,6 +125,7 @@
compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
reg = <0x1e660000 0x180>;
interrupts = <2>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
status = "disabled";
};
@@ -132,6 +133,7 @@
compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
reg = <0x1e680000 0x180>;
interrupts = <3>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
status = "disabled";
};
--
2.14.1
^ permalink raw reply related
* [PATCH 05/20] ARM: dts: aspeed: Add proper clock references
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
The existing device trees use fixed-clocks in order to boot without a
clk driver. The newly added clk driver provides proper clock support,
including gating, so we move the device trees over to properly request
clocks.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 100 +++++++++++++++----------------------
arch/arm/boot/dts/aspeed-g5.dtsi | 104 +++++++++++++++------------------------
2 files changed, 81 insertions(+), 123 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b6d01523555a..c87883a7f250 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
+#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
@@ -107,47 +108,12 @@
ranges;
syscon: syscon at 1e6e2000 {
- compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
+ compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
#address-cells = <1>;
#size-cells = <0>;
-
- clk_clkin: clk_clkin {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- };
-
- clk_hpll: clk_hpll at 70 {
- #clock-cells = <0>;
- compatible = "aspeed,g4-hpll-clock", "fixed-clock";
- reg = <0x70>;
- clocks = <&clk_clkin>;
- clock-frequency = <384000000>;
- };
-
- clk_ahb: clk_ahb at 70 {
- #clock-cells = <0>;
- compatible = "aspeed,g4-ahb-clock", "fixed-clock";
- reg = <0x70>;
- clocks = <&clk_hpll>;
- clock-frequency = <192000000>;
- };
-
- clk_apb: clk_apb at 8 {
- #clock-cells = <0>;
- compatible = "aspeed,g4-apb-clock", "fixed-clock";
- reg = <0x08>;
- clocks = <&clk_hpll>;
- clock-frequency = <48000000>;
- };
-
- clk_uart: clk_uart at 2c{
- #clock-cells = <0>;
- compatible = "aspeed,g4-uart-clock", "fixed-clock";
- reg = <0x2c>;
- clock-frequency = <24000000>;
- };
+ #clock-cells = <1>;
+ #reset-cells = <1>;
pinctrl: pinctrl {
compatible = "aspeed,g4-pinctrl";
@@ -157,7 +123,7 @@
adc: adc at 1e6e9000 {
compatible = "aspeed,ast2400-adc";
reg = <0x1e6e9000 0xb0>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
#io-channel-cells = <1>;
status = "disabled";
};
@@ -182,7 +148,7 @@
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
interrupts = <16 17 18 35 36 37 38 39>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
clock-names = "PCLK";
};
@@ -191,7 +157,7 @@
reg = <0x1e783000 0x20>;
reg-shift = <2>;
interrupts = <9>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
no-loopback-test;
status = "disabled";
};
@@ -201,7 +167,7 @@
reg = <0x1e784000 0x20>;
reg-shift = <2>;
interrupts = <10>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
no-loopback-test;
status = "disabled";
};
@@ -221,7 +187,7 @@
reg = <0x1e787000 0x40>;
reg-shift = <2>;
interrupts = <8>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_APB>;
no-loopback-test;
status = "disabled";
};
@@ -266,7 +232,7 @@
reg = <0x1e78d000 0x20>;
reg-shift = <2>;
interrupts = <32>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
no-loopback-test;
status = "disabled";
};
@@ -276,7 +242,7 @@
reg = <0x1e78e000 0x20>;
reg-shift = <2>;
interrupts = <33>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
no-loopback-test;
status = "disabled";
};
@@ -286,7 +252,7 @@
reg = <0x1e78f000 0x20>;
reg-shift = <2>;
interrupts = <34>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
no-loopback-test;
status = "disabled";
};
@@ -317,7 +283,8 @@
reg = <0x40 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <0>;
interrupt-parent = <&i2c_ic>;
@@ -332,7 +299,8 @@
reg = <0x80 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <1>;
interrupt-parent = <&i2c_ic>;
@@ -347,7 +315,8 @@
reg = <0xc0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <2>;
interrupt-parent = <&i2c_ic>;
@@ -363,7 +332,8 @@
reg = <0x100 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <3>;
interrupt-parent = <&i2c_ic>;
@@ -379,7 +349,8 @@
reg = <0x140 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <4>;
interrupt-parent = <&i2c_ic>;
@@ -395,7 +366,8 @@
reg = <0x180 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <5>;
interrupt-parent = <&i2c_ic>;
@@ -411,7 +383,8 @@
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <6>;
interrupt-parent = <&i2c_ic>;
@@ -427,7 +400,8 @@
reg = <0x300 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <7>;
interrupt-parent = <&i2c_ic>;
@@ -443,7 +417,8 @@
reg = <0x340 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <8>;
interrupt-parent = <&i2c_ic>;
@@ -459,7 +434,8 @@
reg = <0x380 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <9>;
interrupt-parent = <&i2c_ic>;
@@ -475,7 +451,8 @@
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <10>;
interrupt-parent = <&i2c_ic>;
@@ -491,7 +468,8 @@
reg = <0x400 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <11>;
interrupt-parent = <&i2c_ic>;
@@ -507,7 +485,8 @@
reg = <0x440 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <12>;
interrupt-parent = <&i2c_ic>;
@@ -523,7 +502,8 @@
reg = <0x480 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <13>;
interrupt-parent = <&i2c_ic>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 7861631940fe..90bc09d93ea6 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
+#include <dt-bindings/clock/aspeed-clock.h>
#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
@@ -141,55 +142,18 @@
ranges;
syscon: syscon at 1e6e2000 {
- compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
+ compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
#address-cells = <1>;
#size-cells = <0>;
-
- clk_clkin: clk_clkin at 70 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-clkin-clock", "fixed-clock";
- reg = <0x70>;
- clock-frequency = <24000000>;
- };
-
- clk_hpll: clk_hpll at 24 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-hpll-clock", "fixed-clock";
- reg = <0x24>;
- clocks = <&clk_clkin>;
- clock-frequency = <792000000>;
- };
-
- clk_ahb: clk_ahb at 70 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-ahb-clock", "fixed-clock";
- reg = <0x70>;
- clocks = <&clk_hpll>;
- clock-frequency = <198000000>;
- };
-
- clk_apb: clk_apb at 8 {
- #clock-cells = <0>;
- compatible = "aspeed,g5-apb-clock", "fixed-clock";
- reg = <0x08>;
- clocks = <&clk_hpll>;
- clock-frequency = <24750000>;
- };
-
- clk_uart: clk_uart at 2c {
- #clock-cells = <0>;
- compatible = "aspeed,uart-clock", "fixed-clock";
- reg = <0x2c>;
- clock-frequency = <24000000>;
- };
+ #clock-cells = <1>;
+ #reset-cells = <1>;
pinctrl: pinctrl {
compatible = "aspeed,g5-pinctrl";
aspeed,external-nodes = <&gfx &lhc>;
};
-
};
gfx: display at 1e6e6000 {
@@ -201,7 +165,7 @@
adc: adc at 1e6e9000 {
compatible = "aspeed,ast2500-adc";
reg = <0x1e6e9000 0xb0>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
#io-channel-cells = <1>;
status = "disabled";
};
@@ -226,7 +190,7 @@
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
interrupts = <16 17 18 35 36 37 38 39>;
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
clock-names = "PCLK";
};
@@ -235,7 +199,7 @@
reg = <0x1e783000 0x20>;
reg-shift = <2>;
interrupts = <9>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
no-loopback-test;
status = "disabled";
};
@@ -245,7 +209,7 @@
reg = <0x1e784000 0x20>;
reg-shift = <2>;
interrupts = <10>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
no-loopback-test;
status = "disabled";
};
@@ -270,8 +234,8 @@
compatible = "aspeed,ast2500-vuart";
reg = <0x1e787000 0x40>;
reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
+ interrupts = <8>;
+ clocks = <&syscon ASPEED_CLK_APB>;
no-loopback-test;
status = "disabled";
};
@@ -318,7 +282,7 @@
reg = <0x1e78d000 0x20>;
reg-shift = <2>;
interrupts = <32>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
no-loopback-test;
status = "disabled";
};
@@ -328,7 +292,7 @@
reg = <0x1e78e000 0x20>;
reg-shift = <2>;
interrupts = <33>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
no-loopback-test;
status = "disabled";
};
@@ -338,7 +302,7 @@
reg = <0x1e78f000 0x20>;
reg-shift = <2>;
interrupts = <34>;
- clocks = <&clk_uart>;
+ clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
no-loopback-test;
status = "disabled";
};
@@ -369,7 +333,8 @@
reg = <0x40 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <0>;
interrupt-parent = <&i2c_ic>;
@@ -384,7 +349,8 @@
reg = <0x80 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <1>;
interrupt-parent = <&i2c_ic>;
@@ -399,7 +365,8 @@
reg = <0xc0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <2>;
interrupt-parent = <&i2c_ic>;
@@ -415,7 +382,8 @@
reg = <0x100 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <3>;
interrupt-parent = <&i2c_ic>;
@@ -431,7 +399,8 @@
reg = <0x140 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <4>;
interrupt-parent = <&i2c_ic>;
@@ -447,7 +416,8 @@
reg = <0x180 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <5>;
interrupt-parent = <&i2c_ic>;
@@ -463,7 +433,8 @@
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <6>;
interrupt-parent = <&i2c_ic>;
@@ -479,7 +450,8 @@
reg = <0x300 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <7>;
interrupt-parent = <&i2c_ic>;
@@ -495,7 +467,8 @@
reg = <0x340 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <8>;
interrupt-parent = <&i2c_ic>;
@@ -511,7 +484,8 @@
reg = <0x380 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <9>;
interrupt-parent = <&i2c_ic>;
@@ -527,7 +501,8 @@
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <10>;
interrupt-parent = <&i2c_ic>;
@@ -543,7 +518,8 @@
reg = <0x400 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <11>;
interrupt-parent = <&i2c_ic>;
@@ -559,7 +535,8 @@
reg = <0x440 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <12>;
interrupt-parent = <&i2c_ic>;
@@ -575,7 +552,8 @@
reg = <0x480 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
- clocks = <&clk_apb>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
bus-frequency = <100000>;
interrupts = <13>;
interrupt-parent = <&i2c_ic>;
--
2.14.1
^ permalink raw reply related
* [PATCH 04/20] ARM: dts: aspeed: Add LPC and child devices
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
From: Andrew Jeffery <andrew@aj.id.au>
Ensure the ordering is correct and add all of the children in the SoC
device trees for the ast2400 and ast2500.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 35 +++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 27 +++++++++++++++++----------
2 files changed, 52 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 9ebf90f34709..b6d01523555a 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -226,6 +226,41 @@
status = "disabled";
};
+ lpc: lpc at 1e789000 {
+ compatible = "aspeed,ast2400-lpc", "simple-mfd";
+ reg = <0x1e789000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e789000 0x1000>;
+
+ lpc_bmc: lpc-bmc at 0 {
+ compatible = "aspeed,ast2400-lpc-bmc";
+ reg = <0x0 0x80>;
+ };
+
+ lpc_host: lpc-host at 80 {
+ compatible = "aspeed,ast2400-lpc-host", "simple-mfd", "syscon";
+ reg = <0x80 0x1e0>;
+ reg-io-width = <4>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80 0x1e0>;
+
+ lpc_ctrl: lpc-ctrl at 0 {
+ compatible = "aspeed,ast2400-lpc-ctrl";
+ reg = <0x0 0x80>;
+ status = "disabled";
+ };
+
+ lhc: lhc at 20 {
+ compatible = "aspeed,ast2500-lhc";
+ reg = <0x20 0x24 0x48 0x8>;
+ };
+ };
+ };
+
uart2: serial at 1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 1f9d28313f82..7861631940fe 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -266,6 +266,16 @@
status = "disabled";
};
+ vuart: serial at 1e787000 {
+ compatible = "aspeed,ast2500-vuart";
+ reg = <0x1e787000 0x40>;
+ reg-shift = <2>;
+ interrupts = <10>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
+
lpc: lpc at 1e789000 {
compatible = "aspeed,ast2500-lpc", "simple-mfd";
reg = <0x1e789000 0x1000>;
@@ -289,6 +299,13 @@
reg-io-width = <4>;
+ lpc_ctrl: lpc-ctrl at 0 {
+ compatible = "aspeed,ast2500-lpc-ctrl";
+ reg = <0x0 0x80>;
+ status = "disabled";
+ };
+
+
lhc: lhc at 20 {
compatible = "aspeed,ast2500-lhc";
reg = <0x20 0x24 0x48 0x8>;
@@ -296,16 +313,6 @@
};
};
- vuart: serial at 1e787000 {
- compatible = "aspeed,ast2500-vuart";
- reg = <0x1e787000 0x40>;
- reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
-
uart2: serial at 1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
--
2.14.1
^ permalink raw reply related
* [PATCH 03/20] ARM: dts: aspeed-g4: Correct VUART IRQ number
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
This should have always been 8.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 100d092e6c07..9ebf90f34709 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -220,7 +220,7 @@
compatible = "aspeed,ast2400-vuart";
reg = <0x1e787000 0x40>;
reg-shift = <2>;
- interrupts = <10>;
+ interrupts = <8>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
--
2.14.1
^ permalink raw reply related
* [PATCH 02/20] dt-bindings: gpio: Add ASPEED constants
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
These are used to by the device tree to map pin numbers to constants
required by the GPIO bindings.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 1 +
arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
include/dt-bindings/gpio/aspeed-gpio.h | 49 ++++++++++++++++++++++++++++++++++
3 files changed, 51 insertions(+)
create mode 100644 include/dt-bindings/gpio/aspeed-gpio.h
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 45d815a86d42..100d092e6c07 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "Aspeed BMC";
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 5c4ecdba3a6b..1f9d28313f82 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "Aspeed BMC";
diff --git a/include/dt-bindings/gpio/aspeed-gpio.h b/include/dt-bindings/gpio/aspeed-gpio.h
new file mode 100644
index 000000000000..56fc4889b2c4
--- /dev/null
+++ b/include/dt-bindings/gpio/aspeed-gpio.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * This header provides constants for binding aspeed,*-gpio.
+ *
+ * The first cell in Aspeed's GPIO specifier is the GPIO ID. The macros below
+ * provide names for this.
+ *
+ * The second cell contains standard flag values specified in gpio.h.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_ASPEED_GPIO_H
+#define _DT_BINDINGS_GPIO_ASPEED_GPIO_H
+
+#include <dt-bindings/gpio/gpio.h>
+
+#define ASPEED_GPIO_PORT_A 0
+#define ASPEED_GPIO_PORT_B 1
+#define ASPEED_GPIO_PORT_C 2
+#define ASPEED_GPIO_PORT_D 3
+#define ASPEED_GPIO_PORT_E 4
+#define ASPEED_GPIO_PORT_F 5
+#define ASPEED_GPIO_PORT_G 6
+#define ASPEED_GPIO_PORT_H 7
+#define ASPEED_GPIO_PORT_I 8
+#define ASPEED_GPIO_PORT_J 9
+#define ASPEED_GPIO_PORT_K 10
+#define ASPEED_GPIO_PORT_L 11
+#define ASPEED_GPIO_PORT_M 12
+#define ASPEED_GPIO_PORT_N 13
+#define ASPEED_GPIO_PORT_O 14
+#define ASPEED_GPIO_PORT_P 15
+#define ASPEED_GPIO_PORT_Q 16
+#define ASPEED_GPIO_PORT_R 17
+#define ASPEED_GPIO_PORT_S 18
+#define ASPEED_GPIO_PORT_T 19
+#define ASPEED_GPIO_PORT_U 20
+#define ASPEED_GPIO_PORT_V 21
+#define ASPEED_GPIO_PORT_W 22
+#define ASPEED_GPIO_PORT_X 23
+#define ASPEED_GPIO_PORT_Y 24
+#define ASPEED_GPIO_PORT_Z 25
+#define ASPEED_GPIO_PORT_AA 26
+#define ASPEED_GPIO_PORT_AB 27
+#define ASPEED_GPIO_PORT_AC 28
+
+#define ASPEED_GPIO(port, offset) \
+ ((ASPEED_GPIO_PORT_##port * 8) + offset)
+
+#endif
--
2.14.1
^ permalink raw reply related
* [PATCH 01/20] dt-bindings: clock: Add ASPEED constants
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-1-joel@jms.id.au>
These will be merged as part of the clock driver. This commit is
included so the tree will build without the clock series being applied.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
include/dt-bindings/clock/aspeed-clock.h | 54 ++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 include/dt-bindings/clock/aspeed-clock.h
diff --git a/include/dt-bindings/clock/aspeed-clock.h b/include/dt-bindings/clock/aspeed-clock.h
new file mode 100644
index 000000000000..fe46ab69da5c
--- /dev/null
+++ b/include/dt-bindings/clock/aspeed-clock.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+#ifndef DT_BINDINGS_ASPEED_CLOCK_H
+#define DT_BINDINGS_ASPEED_CLOCK_H
+
+#define ASPEED_CLK_GATE_ECLK 0
+#define ASPEED_CLK_GATE_GCLK 1
+#define ASPEED_CLK_GATE_MCLK 2
+#define ASPEED_CLK_GATE_VCLK 3
+#define ASPEED_CLK_GATE_BCLK 4
+#define ASPEED_CLK_GATE_DCLK 5
+#define ASPEED_CLK_GATE_REFCLK 6
+#define ASPEED_CLK_GATE_USBPORT2CLK 7
+#define ASPEED_CLK_GATE_LCLK 8
+#define ASPEED_CLK_GATE_USBUHCICLK 9
+#define ASPEED_CLK_GATE_D1CLK 10
+#define ASPEED_CLK_GATE_YCLK 11
+#define ASPEED_CLK_GATE_USBPORT1CLK 12
+#define ASPEED_CLK_GATE_UART1CLK 13
+#define ASPEED_CLK_GATE_UART2CLK 14
+#define ASPEED_CLK_GATE_UART5CLK 15
+#define ASPEED_CLK_GATE_ESPICLK 16
+#define ASPEED_CLK_GATE_MAC1CLK 17
+#define ASPEED_CLK_GATE_MAC2CLK 18
+#define ASPEED_CLK_GATE_RSACLK 19
+#define ASPEED_CLK_GATE_UART3CLK 20
+#define ASPEED_CLK_GATE_UART4CLK 21
+#define ASPEED_CLK_GATE_SDCLKCLK 22
+#define ASPEED_CLK_GATE_LHCCLK 23
+#define ASPEED_CLK_HPLL 24
+#define ASPEED_CLK_AHB 25
+#define ASPEED_CLK_APB 26
+#define ASPEED_CLK_UART 27
+#define ASPEED_CLK_SDIO 28
+#define ASPEED_CLK_ECLK 29
+#define ASPEED_CLK_ECLK_MUX 30
+#define ASPEED_CLK_LHCLK 31
+#define ASPEED_CLK_MAC 32
+#define ASPEED_CLK_BCLK 33
+#define ASPEED_CLK_MPLL 34
+
+#define ASPEED_NUM_CLKS 35
+
+#define ASPEED_RESET_XDMA 0
+#define ASPEED_RESET_MCTP 1
+#define ASPEED_RESET_ADC 2
+#define ASPEED_RESET_JTAG_MASTER 3
+#define ASPEED_RESET_MIC 4
+#define ASPEED_RESET_PWM 5
+#define ASPEED_RESET_PCIVGA 6
+#define ASPEED_RESET_I2C 7
+#define ASPEED_RESET_AHB 8
+
+#endif
--
2.14.1
^ permalink raw reply related
* [PATCH 00/20] ARM: dts: aspeed: updates and new machines
From: Joel Stanley @ 2017-12-11 5:06 UTC (permalink / raw)
To: linux-arm-kernel
This series of device tree patches for the ASPEED BMC machines
moves all systems to use the soon to be merged clk driver, and
updates machines to use all of the drivers we have upstream.
In addition it adds three new OpenBMC systems that have been developed
in the OpenBMC kernel tree over the past year: two Power9 OpenPower
systems, and a port by Google to a Quanta x86 server.
I have boot tested these on Romulus and Palmetto, as well as boot tested
all device trees in Qemu.
Please review the boards you are familiar with. I will merge these in to
the ASPEED ARM SoC tree for inclusion in 4.16.
Andrew Jeffery (1):
ARM: dts: aspeed: Add LPC and child devices
Joel Stanley (17):
dt-bindings: clock: Add ASPEED constants
dt-bindings: gpio: Add ASPEED constants
ARM: dts: aspeed-g4: Correct VUART IRQ number
ARM: dts: aspeed: Add proper clock references
ARM: dts: aspeed: Add MAC clocks
ARM: dts: aspeed: Add watchdog clocks
ARM: dts: aspeed: Add flash controller clocks
ARM: dts: aspeed: Add clock phandle to GPIO
ARM: dts: aspeed: Add PWM and tachometer node
ARM: dts: aspeed: Add LPC Snoop device
ARM: dts: aspeed: Remove skeleton.dtsi
ARM: dts: aspeed: Update license headers
ARM: dts: Add OpenBMC flash layout
ARM: dts: aspeed: Sort ASPEED entries in makefile
ARM: dts: aspeed: Add Witherspoon BMC machine
ARM: dts: aspeed-romulus: Update Romulus system
ARM: dts: aspeed-plametto: Add flash layout
Rick Altherr (1):
ARM: dts: aspeed: Add Qanta Q71L BMC machine
Xo Wang (1):
ARM: dts: aspeed: Add Ingrasys Zaius BMC machine
arch/arm/boot/dts/Makefile | 8 +-
arch/arm/boot/dts/aspeed-ast2500-evb.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 3 +-
arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 155 ++++++-
arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts | 547 +++++++++++++++++++++++
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 427 ++++++++++++++++++
arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts | 458 +++++++++++++++++++
arch/arm/boot/dts/aspeed-g4.dtsi | 164 ++++---
arch/arm/boot/dts/aspeed-g5.dtsi | 155 ++++---
arch/arm/boot/dts/openbmc-flash-layout.dtsi | 32 ++
include/dt-bindings/clock/aspeed-clock.h | 54 +++
include/dt-bindings/gpio/aspeed-gpio.h | 49 ++
12 files changed, 1908 insertions(+), 146 deletions(-)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
create mode 100644 arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
create mode 100644 arch/arm/boot/dts/openbmc-flash-layout.dtsi
create mode 100644 include/dt-bindings/clock/aspeed-clock.h
create mode 100644 include/dt-bindings/gpio/aspeed-gpio.h
--
2.14.1
^ permalink raw reply
* [PATCH 4/4] PCI: dwc: pci-dra7xx: Fix legacy IRQ handling
From: Vignesh R @ 2017-12-11 4:42 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171208183523.GB1885@e107981-ln.cambridge.arm.com>
On Saturday 09 December 2017 12:05 AM, Lorenzo Pieralisi wrote:
> On Fri, Dec 01, 2017 at 11:43:11AM +0530, Vignesh R wrote:
>> Legacy INTD IRQ handling is broken on dra7xx due to fact that driver
>> uses hwirq in range of 1-4 for INTA, INTD whereas IRQ domain is of size
>> 4 which is numbered 0-3. Therefore when INTD IRQ line is used with
>> pci-dra7xx driver following warning is seen:
>>
>> WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:342 irq_domain_associate+0x12c/0x1c4
>> error: hwirq 0x4 is too large for dummy
>>
>> Fix this by using pci_irqd_intx_xlate() helper to translate the INTx 1-4
>> range into the 0-3 as done in other PCIe drivers.
>>
>> Also, iterate over all the INTx bits and call their respective IRQ
>> handlers before clearing the status register.
>
> It seems to me that you are fixing two bugs with one patch and therefore
> I would ask you to split it in two or explain to me why we should
> consider lumping them together.
>
Ok, I will split the patch into two in v2.
--
Regards
Vignesh
^ permalink raw reply
* [PATCH v5] dmaengine: dmatest: move callback wait queue to thread context
From: Vinod Koul @ 2017-12-11 3:16 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1511797501-7877-1-git-send-email-awallis@codeaurora.org>
On Mon, Nov 27, 2017 at 10:45:01AM -0500, Adam Wallis wrote:
> Commit adfa543e7314 ("dmatest: don't use set_freezable_with_signal()")
> introduced a bug (that is in fact documented by the patch commit text)
> that leaves behind a dangling pointer. Since the done_wait structure is
> allocated on the stack, future invocations to the DMATEST can produce
> undesirable results (e.g., corrupted spinlocks).
>
> Commit a9df21e34b42 ("dmaengine: dmatest: warn user when dma test times
> out") attempted to WARN the user that the stack was likely corrupted but
> did not fix the actual issue.
>
> This patch fixes the issue by pushing the wait queue and callback
> structs into the the thread structure. If a failure occurs due to time,
> dmaengine_terminate_all will force the callback to safely call
> wake_up_all() without possibility of using a freed pointer.
Applied, thanks
--
~Vinod
^ permalink raw reply
* [PATCH v2 00/18] arm64: Unmap the kernel whilst running in userspace (KAISER)
From: Shanker Donthineni @ 2017-12-11 2:24 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171201181456.GE8826@arm.com>
Hi Will,
I tested v2 patch series on Centriq2400 server platform successfully, no regression so far. And also
we applied internal patches on top of the branch "kpti" and verified kaiser feature.
Tested-by: Shanker Donthineni <shankerd@codeaurora.org>
--
Shanker Donthineni
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply
* [RESEND PATCH v4 2/2] arm64: Add software workaround for Falkor erratum 1041
From: Shanker Donthineni @ 2017-12-11 2:03 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512957823-18064-1-git-send-email-shankerd@codeaurora.org>
The ARM architecture defines the memory locations that are permitted
to be accessed as the result of a speculative instruction fetch from
an exception level for which all stages of translation are disabled.
Specifically, the core is permitted to speculatively fetch from the
4KB region containing the current program counter 4K and next 4K.
When translation is changed from enabled to disabled for the running
exception level (SCTLR_ELn[M] changed from a value of 1 to 0), the
Falkor core may errantly speculatively access memory locations outside
of the 4KB region permitted by the architecture. The errant memory
access may lead to one of the following unexpected behaviors.
1) A System Error Interrupt (SEI) being raised by the Falkor core due
to the errant memory access attempting to access a region of memory
that is protected by a slave-side memory protection unit.
2) Unpredictable device behavior due to a speculative read from device
memory. This behavior may only occur if the instruction cache is
disabled prior to or coincident with translation being changed from
enabled to disabled.
The conditions leading to this erratum will not occur when either of the
following occur:
1) A higher exception level disables translation of a lower exception level
(e.g. EL2 changing SCTLR_EL1[M] from a value of 1 to 0).
2) An exception level disabling its stage-1 translation if its stage-2
translation is enabled (e.g. EL1 changing SCTLR_EL1[M] from a value of 1
to 0 when HCR_EL2[VM] has a value of 1).
To avoid the errant behavior, software must execute an ISB immediately
prior to executing the MSR that will change SCTLR_ELn[M] from 1 to 0.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
---
Changes since v3:
Rebased to kernel v4.15-rc1.
Changes since v2:
Repost the corrected patches.
Changes since v1:
Apply the workaround where it's required.
Documentation/arm64/silicon-errata.txt | 1 +
arch/arm64/Kconfig | 12 +++++++++++-
arch/arm64/include/asm/assembler.h | 19 +++++++++++++++++++
arch/arm64/include/asm/cpucaps.h | 3 ++-
arch/arm64/kernel/cpu-reset.S | 1 +
arch/arm64/kernel/cpu_errata.c | 16 ++++++++++++++++
arch/arm64/kernel/efi-entry.S | 2 ++
arch/arm64/kernel/head.S | 1 +
arch/arm64/kernel/relocate_kernel.S | 1 +
arch/arm64/kvm/hyp-init.S | 1 +
10 files changed, 55 insertions(+), 2 deletions(-)
diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt
index 304bf22..fc1c884 100644
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@@ -75,3 +75,4 @@ stable kernels.
| Qualcomm Tech. | Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 |
| Qualcomm Tech. | Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 |
| Qualcomm Tech. | QDF2400 ITS | E0065 | QCOM_QDF2400_ERRATUM_0065 |
+| Qualcomm Tech. | Falkor v{1,2} | E1041 | QCOM_FALKOR_ERRATUM_1041 |
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index a93339f..c9a7e9e 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -557,7 +557,6 @@ config QCOM_QDF2400_ERRATUM_0065
If unsure, say Y.
-
config SOCIONEXT_SYNQUACER_PREITS
bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
default y
@@ -576,6 +575,17 @@ config HISILICON_ERRATUM_161600802
a 128kB offset to be applied to the target address in this commands.
If unsure, say Y.
+
+config QCOM_FALKOR_ERRATUM_E1041
+ bool "Falkor E1041: Speculative instruction fetches might cause errant memory access"
+ default y
+ help
+ Falkor CPU may speculatively fetch instructions from an improper
+ memory location when MMU translation is changed from SCTLR_ELn[M]=1
+ to SCTLR_ELn[M]=0. Prefix an ISB instruction to fix the problem.
+
+ If unsure, say Y.
+
endmenu
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index aef72d8..c77742a 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -31,6 +31,7 @@
#include <asm/pgtable-hwdef.h>
#include <asm/ptrace.h>
#include <asm/thread_info.h>
+#include <asm/alternative.h>
.macro save_and_disable_daif, flags
mrs \flags, daif
@@ -512,4 +513,22 @@
#endif
.endm
+/**
+ * Errata workaround prior to disable MMU. Insert an ISB immediately prior
+ * to executing the MSR that will change SCTLR_ELn[M] from a value of 1 to 0.
+ */
+ .macro pre_disable_mmu_workaround
+#ifdef CONFIG_QCOM_FALKOR_ERRATUM_E1041
+alternative_if ARM64_WORKAROUND_QCOM_FALKOR_E1041
+ isb
+alternative_else_nop_endif
+#endif
+ .endm
+
+ .macro pre_disable_mmu_early_workaround
+#ifdef CONFIG_QCOM_FALKOR_ERRATUM_E1041
+ isb
+#endif
+ .endm
+
#endif /* __ASM_ASSEMBLER_H */
diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h
index 2ff7c5e..b884268 100644
--- a/arch/arm64/include/asm/cpucaps.h
+++ b/arch/arm64/include/asm/cpucaps.h
@@ -41,7 +41,8 @@
#define ARM64_WORKAROUND_CAVIUM_30115 20
#define ARM64_HAS_DCPOP 21
#define ARM64_SVE 22
+#define ARM64_WORKAROUND_QCOM_FALKOR_E1041 23
-#define ARM64_NCAPS 23
+#define ARM64_NCAPS 24
#endif /* __ASM_CPUCAPS_H */
diff --git a/arch/arm64/kernel/cpu-reset.S b/arch/arm64/kernel/cpu-reset.S
index 65f42d2..2a752cb 100644
--- a/arch/arm64/kernel/cpu-reset.S
+++ b/arch/arm64/kernel/cpu-reset.S
@@ -37,6 +37,7 @@ ENTRY(__cpu_soft_restart)
mrs x12, sctlr_el1
ldr x13, =SCTLR_ELx_FLAGS
bic x12, x12, x13
+ pre_disable_mmu_workaround
msr sctlr_el1, x12
isb
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 0e27f86..2fd1938 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -179,6 +179,22 @@ static int cpu_enable_trap_ctr_access(void *__unused)
MIDR_CPU_VAR_REV(0, 0)),
},
#endif
+#ifdef CONFIG_QCOM_FALKOR_ERRATUM_E1041
+ {
+ .desc = "Qualcomm Technologies Falkor erratum 1041",
+ .capability = ARM64_WORKAROUND_QCOM_FALKOR_E1041,
+ MIDR_RANGE(MIDR_QCOM_FALKOR_V1,
+ MIDR_CPU_VAR_REV(0, 0),
+ MIDR_CPU_VAR_REV(0, 0)),
+ },
+ {
+ .desc = "Qualcomm Technologies Falkor erratum 1041",
+ .capability = ARM64_WORKAROUND_QCOM_FALKOR_E1041,
+ MIDR_RANGE(MIDR_QCOM_FALKOR,
+ MIDR_CPU_VAR_REV(0, 1),
+ MIDR_CPU_VAR_REV(0, 2)),
+ },
+#endif
#ifdef CONFIG_ARM64_ERRATUM_858921
{
/* Cortex-A73 all versions */
diff --git a/arch/arm64/kernel/efi-entry.S b/arch/arm64/kernel/efi-entry.S
index 4e6ad35..dc675ba 100644
--- a/arch/arm64/kernel/efi-entry.S
+++ b/arch/arm64/kernel/efi-entry.S
@@ -96,6 +96,7 @@ ENTRY(entry)
mrs x0, sctlr_el2
bic x0, x0, #1 << 0 // clear SCTLR.M
bic x0, x0, #1 << 2 // clear SCTLR.C
+ pre_disable_mmu_early_workaround
msr sctlr_el2, x0
isb
b 2f
@@ -103,6 +104,7 @@ ENTRY(entry)
mrs x0, sctlr_el1
bic x0, x0, #1 << 0 // clear SCTLR.M
bic x0, x0, #1 << 2 // clear SCTLR.C
+ pre_disable_mmu_early_workaround
msr sctlr_el1, x0
isb
2:
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 67e86a0..a0d737d 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -750,6 +750,7 @@ __primary_switch:
* to take into account by discarding the current kernel mapping and
* creating a new one.
*/
+ pre_disable_mmu_early_workaround
msr sctlr_el1, x20 // disable the MMU
isb
bl __create_page_tables // recreate kernel mapping
diff --git a/arch/arm64/kernel/relocate_kernel.S b/arch/arm64/kernel/relocate_kernel.S
index ce704a4..f407e42 100644
--- a/arch/arm64/kernel/relocate_kernel.S
+++ b/arch/arm64/kernel/relocate_kernel.S
@@ -45,6 +45,7 @@ ENTRY(arm64_relocate_new_kernel)
mrs x0, sctlr_el2
ldr x1, =SCTLR_ELx_FLAGS
bic x0, x0, x1
+ pre_disable_mmu_workaround
msr sctlr_el2, x0
isb
1:
diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S
index 3f96155..870828c 100644
--- a/arch/arm64/kvm/hyp-init.S
+++ b/arch/arm64/kvm/hyp-init.S
@@ -151,6 +151,7 @@ reset:
mrs x5, sctlr_el2
ldr x6, =SCTLR_ELx_FLAGS
bic x5, x5, x6 // Clear SCTL_M and etc
+ pre_disable_mmu_workaround
msr sctlr_el2, x5
isb
--
Qualcomm Datacenter Technologies, Inc. on behalf of the Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply related
* [RESEND PATCH v4 1/2] arm64: Define cputype macros for Falkor CPU
From: Shanker Donthineni @ 2017-12-11 2:03 UTC (permalink / raw)
To: linux-arm-kernel
Add cputype definition macros for Qualcomm Datacenter Technologies
Falkor CPU in cputype.h. It's unfortunate that the first revision
of the Falkor CPU used the wrong part number 0x800, got fixed in v2
chip with part number 0xC00, and would be used the same value for
future revisions.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
---
arch/arm64/include/asm/cputype.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index 235e77d..cbf08d7 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -91,6 +91,7 @@
#define BRCM_CPU_PART_VULCAN 0x516
#define QCOM_CPU_PART_FALKOR_V1 0x800
+#define QCOM_CPU_PART_FALKOR 0xC00
#define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
#define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
@@ -99,6 +100,7 @@
#define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
#define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX)
#define MIDR_QCOM_FALKOR_V1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR_V1)
+#define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR)
#ifndef __ASSEMBLY__
--
Qualcomm Datacenter Technologies, Inc. on behalf of the Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply related
* [PATCH v8 2/2] media: i2c: Add the ov7740 image sensor driver
From: Yang, Wenyou @ 2017-12-11 1:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CAOFm3uFASPpuMtGSetcYME0pQEmuzoLqY=Yhv5aaFu5AzJwaew@mail.gmail.com>
Hi Philippe,
On 2017/12/8 21:14, Philippe Ombredanne wrote:
> Wenyou,
>
> On Fri, Dec 8, 2017 at 2:55 AM, Wenyou Yang <wenyou.yang@microchip.com> wrote:
>> The ov7740 (color) image sensor is a high performance VGA CMOS
>> image snesor, which supports for output formats: RAW RGB and YUV
>> and image sizes: VGA, and QVGA, CIF and any size smaller.
>>
>> Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
>> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> []
>> --- /dev/null
>> +++ b/drivers/media/i2c/ov7740.c
>> @@ -0,0 +1,1226 @@
>> +/*
>> + * Copyright (c) 2017 Microchip Corporation.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License version
>> + * 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + */
> Have you considered using the new SPDX ids instead of this fine legalese?
> e.g.:
>
> // SPDX-License-Identifier: GPL-2.0
> // Copyright (c) 2017 Microchip Corporation.
>
> Short and neat! Check also Thomas doc patches and Linus comments on
> why he prefers the C++ comment style for these.
Thank you for your suggestion and information.
Best Regards,
Wenyou Yang
^ permalink raw reply
* [PATCH v9 2/2] media: i2c: Add the ov7740 image sensor driver
From: Wenyou Yang @ 2017-12-11 1:31 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211013146.2497-1-wenyou.yang@microchip.com>
The ov7740 (color) image sensor is a high performance VGA CMOS
image snesor, which supports for output formats: RAW RGB and YUV
and image sizes: VGA, and QVGA, CIF and any size smaller.
Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v9:
- Use the new SPDX ids.
Changes in v8:
- As the registers are written at stream start, remove the written
code from the set fmt function.
Changes in v7:
- Fix the wrong handle of default register configuration.
- Add the missed assignment of ov7740->frmsize.
Changes in v6:
- Remove unnecessary #include <linux/init>.
- Remove unnecessary comments and extra newline.
- Add const for some structures.
- Add the check of the return value from regmap_write().
- Simplify the calling of __v4l2_ctrl_handler_setup().
- Add the default format initialization function.
- Integrate the set_power() and enable/disable the clock into
one function.
Changes in v5:
- Squash the driver and MAINTAINERS entry patches to one.
- Precede the driver patch with the bindings patch.
Changes in v4:
- Assign 'val' a initial value to avoid warning: 'val' may be
used uninitialized.
- Rename REG_REG15 to avoid warning: "REG_REG15" redefined.
Changes in v3:
- Put the MAINTAINERS change to a separate patch.
Changes in v2:
- Split off the bindings into a separate patch.
- Add a new entry to the MAINTAINERS file.
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 8 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov7740.c | 1216 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 1233 insertions(+)
create mode 100644 drivers/media/i2c/ov7740.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 7a52a66aa991..1de965009b13 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10053,6 +10053,14 @@ S: Maintained
F: drivers/media/i2c/ov7670.c
F: Documentation/devicetree/bindings/media/i2c/ov7670.txt
+OMNIVISION OV7740 SENSOR DRIVER
+M: Wenyou Yang <wenyou.yang@microchip.com>
+L: linux-media at vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/i2c/ov7740.c
+F: Documentation/devicetree/bindings/media/i2c/ov7740.txt
+
ONENAND FLASH DRIVER
M: Kyungmin Park <kyungmin.park@samsung.com>
L: linux-mtd at lists.infradead.org
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index cb5d7ff82915..00b1c4c031d4 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -665,6 +665,14 @@ config VIDEO_OV7670
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
+config VIDEO_OV7740
+ tristate "OmniVision OV7740 sensor support"
+ depends on I2C && VIDEO_V4L2
+ depends on MEDIA_CAMERA_SUPPORT
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the OmniVision
+ OV7740 VGA camera sensor.
+
config VIDEO_OV9650
tristate "OmniVision OV9650/OV9652 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 548a9efce966..9b19ec7fcaf4 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_VIDEO_OV5670) += ov5670.o
obj-$(CONFIG_VIDEO_OV6650) += ov6650.o
obj-$(CONFIG_VIDEO_OV7640) += ov7640.o
obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
+obj-$(CONFIG_VIDEO_OV7740) += ov7740.o
obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
obj-$(CONFIG_VIDEO_OV13858) += ov13858.o
obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o
diff --git a/drivers/media/i2c/ov7740.c b/drivers/media/i2c/ov7740.c
new file mode 100644
index 000000000000..0308ba437bbb
--- /dev/null
+++ b/drivers/media/i2c/ov7740.c
@@ -0,0 +1,1216 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Microchip Corporation.
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-image-sizes.h>
+#include <media/v4l2-subdev.h>
+
+#define REG_OUTSIZE_LSB 0x34
+
+/* OV7740 register tables */
+#define REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */
+#define REG_BGAIN 0x01 /* blue gain */
+#define REG_RGAIN 0x02 /* red gain */
+#define REG_GGAIN 0x03 /* green gain */
+#define REG_REG04 0x04 /* analog setting, dont change*/
+#define REG_BAVG 0x05 /* b channel average */
+#define REG_GAVG 0x06 /* g channel average */
+#define REG_RAVG 0x07 /* r channel average */
+
+#define REG_REG0C 0x0C /* filp enable */
+#define REG0C_IMG_FLIP 0x80
+#define REG0C_IMG_MIRROR 0x40
+
+#define REG_REG0E 0x0E /* blc line */
+#define REG_HAEC 0x0F /* auto exposure cntrl */
+#define REG_AEC 0x10 /* auto exposure cntrl */
+
+#define REG_CLK 0x11 /* Clock control */
+#define REG_REG55 0x55 /* Clock PLL DIV/PreDiv */
+
+#define REG_REG12 0x12
+
+#define REG_REG13 0x13 /* auto/manual AGC, AEC, Write Balance*/
+#define REG13_AEC_EN 0x01
+#define REG13_AGC_EN 0x04
+
+#define REG_REG14 0x14
+#define REG_CTRL15 0x15
+#define REG15_GAIN_MSB 0x03
+
+#define REG_REG16 0x16
+
+#define REG_MIDH 0x1C /* manufacture id byte */
+#define REG_MIDL 0x1D /* manufacture id byre */
+#define REG_PIDH 0x0A /* Product ID MSB */
+#define REG_PIDL 0x0B /* Product ID LSB */
+
+#define REG_84 0x84 /* lots of stuff */
+#define REG_REG38 0x38 /* sub-addr */
+
+#define REG_AHSTART 0x17 /* Horiz start high bits */
+#define REG_AHSIZE 0x18
+#define REG_AVSTART 0x19 /* Vert start high bits */
+#define REG_AVSIZE 0x1A
+#define REG_PSHFT 0x1b /* Pixel delay after HREF */
+
+#define REG_HOUTSIZE 0x31
+#define REG_VOUTSIZE 0x32
+#define REG_HVSIZEOFF 0x33
+#define REG_REG34 0x34 /* DSP output size H/V LSB*/
+
+#define REG_ISP_CTRL00 0x80
+#define ISPCTRL00_AWB_EN 0x10
+#define ISPCTRL00_AWB_GAIN_EN 0x04
+
+#define REG_YGAIN 0xE2 /* ygain for contrast control */
+
+#define REG_YBRIGHT 0xE3
+#define REG_SGNSET 0xE4
+#define SGNSET_YBRIGHT_MASK 0x08
+
+#define REG_USAT 0xDD
+#define REG_VSAT 0xDE
+
+
+struct ov7740 {
+ struct v4l2_subdev subdev;
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ struct media_pad pad;
+#endif
+ struct v4l2_mbus_framefmt format;
+ const struct ov7740_pixfmt *fmt; /* Current format */
+ const struct ov7740_framesize *frmsize;
+ struct regmap *regmap;
+ struct clk *xvclk;
+ struct v4l2_ctrl_handler ctrl_handler;
+ struct {
+ /* gain cluster */
+ struct v4l2_ctrl *auto_gain;
+ struct v4l2_ctrl *gain;
+ };
+ struct {
+ struct v4l2_ctrl *auto_wb;
+ struct v4l2_ctrl *blue_balance;
+ struct v4l2_ctrl *red_balance;
+ };
+ struct {
+ struct v4l2_ctrl *hflip;
+ struct v4l2_ctrl *vflip;
+ };
+ struct {
+ /* exposure cluster */
+ struct v4l2_ctrl *auto_exposure;
+ struct v4l2_ctrl *exposure;
+ };
+ struct {
+ /* saturation/hue cluster */
+ struct v4l2_ctrl *saturation;
+ struct v4l2_ctrl *hue;
+ };
+ struct v4l2_ctrl *brightness;
+ struct v4l2_ctrl *contrast;
+
+ struct mutex mutex; /* To serialize asynchronus callbacks */
+ bool streaming; /* Streaming on/off */
+
+ struct gpio_desc *resetb_gpio;
+ struct gpio_desc *pwdn_gpio;
+};
+
+struct ov7740_pixfmt {
+ u32 mbus_code;
+ enum v4l2_colorspace colorspace;
+ const struct reg_sequence *regs;
+ u32 reg_num;
+};
+
+struct ov7740_framesize {
+ u16 width;
+ u16 height;
+ const struct reg_sequence *regs;
+ u32 reg_num;
+};
+
+static const struct reg_sequence ov7740_vga[] = {
+ {0x55, 0x40},
+ {0x11, 0x02},
+
+ {0xd5, 0x10},
+ {0x0c, 0x12},
+ {0x0d, 0x34},
+ {0x17, 0x25},
+ {0x18, 0xa0},
+ {0x19, 0x03},
+ {0x1a, 0xf0},
+ {0x1b, 0x89},
+ {0x22, 0x03},
+ {0x29, 0x18},
+ {0x2b, 0xf8},
+ {0x2c, 0x01},
+ {REG_HOUTSIZE, 0xa0},
+ {REG_VOUTSIZE, 0xf0},
+ {0x33, 0xc4},
+ {REG_OUTSIZE_LSB, 0x0},
+ {0x35, 0x05},
+ {0x04, 0x60},
+ {0x27, 0x80},
+ {0x3d, 0x0f},
+ {0x3e, 0x80},
+ {0x3f, 0x40},
+ {0x40, 0x7f},
+ {0x41, 0x6a},
+ {0x42, 0x29},
+ {0x44, 0x22},
+ {0x45, 0x41},
+ {0x47, 0x02},
+ {0x49, 0x64},
+ {0x4a, 0xa1},
+ {0x4b, 0x40},
+ {0x4c, 0x1a},
+ {0x4d, 0x50},
+ {0x4e, 0x13},
+ {0x64, 0x00},
+ {0x67, 0x88},
+ {0x68, 0x1a},
+
+ {0x14, 0x28},
+ {0x24, 0x3c},
+ {0x25, 0x30},
+ {0x26, 0x72},
+ {0x50, 0x97},
+ {0x51, 0x1f},
+ {0x52, 0x00},
+ {0x53, 0x00},
+ {0x20, 0x00},
+ {0x21, 0xcf},
+ {0x50, 0x4b},
+ {0x38, 0x14},
+ {0xe9, 0x00},
+ {0x56, 0x55},
+ {0x57, 0xff},
+ {0x58, 0xff},
+ {0x59, 0xff},
+ {0x5f, 0x04},
+ {0xec, 0x00},
+ {0x13, 0xff},
+
+ {0x81, 0x3f},
+ {0x82, 0x32},
+ {0x38, 0x11},
+ {0x84, 0x70},
+ {0x85, 0x00},
+ {0x86, 0x03},
+ {0x87, 0x01},
+ {0x88, 0x05},
+ {0x89, 0x30},
+ {0x8d, 0x30},
+ {0x8f, 0x85},
+ {0x93, 0x30},
+ {0x95, 0x85},
+ {0x99, 0x30},
+ {0x9b, 0x85},
+
+ {0x9c, 0x08},
+ {0x9d, 0x12},
+ {0x9e, 0x23},
+ {0x9f, 0x45},
+ {0xa0, 0x55},
+ {0xa1, 0x64},
+ {0xa2, 0x72},
+ {0xa3, 0x7f},
+ {0xa4, 0x8b},
+ {0xa5, 0x95},
+ {0xa6, 0xa7},
+ {0xa7, 0xb5},
+ {0xa8, 0xcb},
+ {0xa9, 0xdd},
+ {0xaa, 0xec},
+ {0xab, 0x1a},
+
+ {0xce, 0x78},
+ {0xcf, 0x6e},
+ {0xd0, 0x0a},
+ {0xd1, 0x0c},
+ {0xd2, 0x84},
+ {0xd3, 0x90},
+ {0xd4, 0x1e},
+
+ {0x5a, 0x24},
+ {0x5b, 0x1f},
+ {0x5c, 0x88},
+ {0x5d, 0x60},
+
+ {0xac, 0x6e},
+ {0xbe, 0xff},
+ {0xbf, 0x00},
+
+ {0x0f, 0x1d},
+ {0x0f, 0x1f},
+};
+
+static const struct ov7740_framesize ov7740_framesizes[] = {
+ {
+ .width = VGA_WIDTH,
+ .height = VGA_HEIGHT,
+ .regs = ov7740_vga,
+ .reg_num = ARRAY_SIZE(ov7740_vga),
+ },
+};
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov7740_get_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+ struct regmap *regmap = ov7740->regmap;
+ unsigned int val = 0;
+ int ret;
+
+ ret = regmap_read(regmap, reg->reg & 0xff, &val);
+ reg->val = val;
+ reg->size = 1;
+
+ return 0;
+}
+
+static int ov7740_set_register(struct v4l2_subdev *sd,
+ const struct v4l2_dbg_register *reg)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+ struct regmap *regmap = ov7740->regmap;
+
+ regmap_write(regmap, reg->reg & 0xff, reg->val & 0xff);
+
+ return 0;
+}
+#endif
+
+static int ov7740_set_power(struct ov7740 *ov7740, int on)
+{
+ int ret;
+
+ if (on) {
+ ret = clk_prepare_enable(ov7740->xvclk);
+ if (ret)
+ return ret;
+
+ if (ov7740->pwdn_gpio)
+ gpiod_direction_output(ov7740->pwdn_gpio, 0);
+
+ if (ov7740->resetb_gpio) {
+ gpiod_set_value(ov7740->resetb_gpio, 1);
+ usleep_range(500, 1000);
+ gpiod_set_value(ov7740->resetb_gpio, 0);
+ usleep_range(3000, 5000);
+ }
+ } else {
+ clk_disable_unprepare(ov7740->xvclk);
+
+ if (ov7740->pwdn_gpio)
+ gpiod_direction_output(ov7740->pwdn_gpio, 0);
+ }
+
+ return 0;
+}
+
+static struct v4l2_subdev_core_ops ov7740_subdev_core_ops = {
+ .log_status = v4l2_ctrl_subdev_log_status,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = ov7740_get_register,
+ .s_register = ov7740_set_register,
+#endif
+ .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+ .unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static int ov7740_set_white_balance(struct ov7740 *ov7740, int awb)
+{
+ struct regmap *regmap = ov7740->regmap;
+ unsigned int value;
+ int ret;
+
+ ret = regmap_read(regmap, REG_ISP_CTRL00, &value);
+ if (!ret) {
+ if (awb)
+ value |= (ISPCTRL00_AWB_EN | ISPCTRL00_AWB_GAIN_EN);
+ else
+ value &= ~(ISPCTRL00_AWB_EN | ISPCTRL00_AWB_GAIN_EN);
+ ret = regmap_write(regmap, REG_ISP_CTRL00, value);
+ if (ret)
+ return ret;
+ }
+
+ if (!awb) {
+ ret = regmap_write(regmap, REG_BGAIN,
+ ov7740->blue_balance->val);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(regmap, REG_RGAIN, ov7740->red_balance->val);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ov7740_set_saturation(struct regmap *regmap, int value)
+{
+ int ret;
+
+ ret = regmap_write(regmap, REG_USAT, (unsigned char)value);
+ if (ret)
+ return ret;
+
+ return regmap_write(regmap, REG_VSAT, (unsigned char)value);
+}
+
+static int ov7740_set_gain(struct regmap *regmap, int value)
+{
+ int ret;
+
+ ret = regmap_write(regmap, REG_GAIN, value & 0xff);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(regmap, REG_CTRL15,
+ REG15_GAIN_MSB, (value >> 8) & 0x3);
+ if (!ret)
+ ret = regmap_update_bits(regmap, REG_REG13, REG13_AGC_EN, 0);
+
+ return ret;
+}
+
+static int ov7740_set_autogain(struct regmap *regmap, int value)
+{
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(regmap, REG_REG13, ®);
+ if (ret)
+ return ret;
+ if (value)
+ reg |= REG13_AGC_EN;
+ else
+ reg &= ~REG13_AGC_EN;
+ return regmap_write(regmap, REG_REG13, reg);
+}
+
+static int ov7740_set_brightness(struct regmap *regmap, int value)
+{
+ /* Turn off AEC/AGC */
+ regmap_update_bits(regmap, REG_REG13, REG13_AEC_EN, 0);
+ regmap_update_bits(regmap, REG_REG13, REG13_AGC_EN, 0);
+
+ if (value >= 0) {
+ regmap_write(regmap, REG_YBRIGHT, (unsigned char)value);
+ regmap_update_bits(regmap, REG_SGNSET, SGNSET_YBRIGHT_MASK, 0);
+ } else{
+ regmap_write(regmap, REG_YBRIGHT, (unsigned char)(-value));
+ regmap_update_bits(regmap, REG_SGNSET, SGNSET_YBRIGHT_MASK, 1);
+ }
+
+ return 0;
+}
+
+static int ov7740_set_contrast(struct regmap *regmap, int value)
+{
+ return regmap_write(regmap, REG_YGAIN, (unsigned char)value);
+}
+
+static int ov7740_get_gain(struct ov7740 *ov7740, struct v4l2_ctrl *ctrl)
+{
+ struct regmap *regmap = ov7740->regmap;
+ unsigned int value0, value1;
+ int ret;
+
+ if (!ctrl->val)
+ return 0;
+
+ ret = regmap_read(regmap, REG_GAIN, &value0);
+ if (ret)
+ return ret;
+ ret = regmap_read(regmap, REG_CTRL15, &value1);
+ if (ret)
+ return ret;
+
+ ov7740->gain->val = (value1 << 8) | (value0 & 0xff);
+
+ return 0;
+}
+
+static int ov7740_set_exp(struct regmap *regmap, int value)
+{
+ int ret;
+
+ /* Turn off AEC/AGC */
+ ret = regmap_update_bits(regmap, REG_REG13,
+ REG13_AEC_EN | REG13_AGC_EN, 0);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(regmap, REG_AEC, (unsigned char)value);
+ if (ret)
+ return ret;
+
+ return regmap_write(regmap, REG_HAEC, (unsigned char)(value >> 8));
+}
+
+static int ov7740_set_autoexp(struct regmap *regmap,
+ enum v4l2_exposure_auto_type value)
+{
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(regmap, REG_REG13, ®);
+ if (!ret) {
+ if (value == V4L2_EXPOSURE_AUTO)
+ reg |= (REG13_AEC_EN | REG13_AGC_EN);
+ else
+ reg &= ~(REG13_AEC_EN | REG13_AGC_EN);
+ ret = regmap_write(regmap, REG_REG13, reg);
+ }
+
+ return ret;
+}
+
+
+static int ov7740_get_volatile_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct ov7740 *ov7740 = container_of(ctrl->handler,
+ struct ov7740, ctrl_handler);
+ int ret;
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUTOGAIN:
+ ret = ov7740_get_gain(ov7740, ctrl);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int ov7740_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct ov7740 *ov7740 = container_of(ctrl->handler,
+ struct ov7740, ctrl_handler);
+ struct i2c_client *client = v4l2_get_subdevdata(&ov7740->subdev);
+ struct regmap *regmap = ov7740->regmap;
+ int ret;
+ u8 val = 0;
+
+ if (pm_runtime_get_if_in_use(&client->dev) <= 0)
+ return 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUTO_WHITE_BALANCE:
+ ret = ov7740_set_white_balance(ov7740, ctrl->val);
+ break;
+ case V4L2_CID_SATURATION:
+ ret = ov7740_set_saturation(regmap, ctrl->val);
+ break;
+ case V4L2_CID_BRIGHTNESS:
+ ret = ov7740_set_brightness(regmap, ctrl->val);
+ break;
+ case V4L2_CID_CONTRAST:
+ ret = ov7740_set_contrast(regmap, ctrl->val);
+ break;
+ case V4L2_CID_VFLIP:
+ ret = regmap_update_bits(regmap, REG_REG0C,
+ REG0C_IMG_FLIP, val);
+ break;
+ case V4L2_CID_HFLIP:
+ val = ctrl->val ? REG0C_IMG_MIRROR : 0x00;
+ ret = regmap_update_bits(regmap, REG_REG0C,
+ REG0C_IMG_MIRROR, val);
+ break;
+ case V4L2_CID_AUTOGAIN:
+ if (!ctrl->val)
+ return ov7740_set_gain(regmap, ov7740->gain->val);
+
+ ret = ov7740_set_autogain(regmap, ctrl->val);
+ break;
+
+ case V4L2_CID_EXPOSURE_AUTO:
+ if (ctrl->val == V4L2_EXPOSURE_MANUAL)
+ return ov7740_set_exp(regmap, ov7740->exposure->val);
+
+ ret = ov7740_set_autoexp(regmap, ctrl->val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ pm_runtime_put(&client->dev);
+
+ return ret;
+}
+
+static const struct v4l2_ctrl_ops ov7740_ctrl_ops = {
+ .g_volatile_ctrl = ov7740_get_volatile_ctrl,
+ .s_ctrl = ov7740_set_ctrl,
+};
+
+static int ov7740_start_streaming(struct ov7740 *ov7740)
+{
+ int ret;
+
+ if (ov7740->fmt) {
+ ret = regmap_multi_reg_write(ov7740->regmap,
+ ov7740->fmt->regs,
+ ov7740->fmt->reg_num);
+ if (ret)
+ return ret;
+ }
+
+ if (ov7740->frmsize) {
+ ret = regmap_multi_reg_write(ov7740->regmap,
+ ov7740->frmsize->regs,
+ ov7740->frmsize->reg_num);
+ if (ret)
+ return ret;
+ }
+
+ return __v4l2_ctrl_handler_setup(ov7740->subdev.ctrl_handler);
+}
+
+static int ov7740_set_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret = 0;
+
+ mutex_lock(&ov7740->mutex);
+ if (ov7740->streaming == enable) {
+ mutex_unlock(&ov7740->mutex);
+ return 0;
+ }
+
+ if (enable) {
+ ret = pm_runtime_get_sync(&client->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&client->dev);
+ goto err_unlock;
+ }
+
+ ret = ov7740_start_streaming(ov7740);
+ if (ret)
+ goto err_rpm_put;
+ } else {
+ pm_runtime_put(&client->dev);
+ }
+
+ ov7740->streaming = enable;
+
+ mutex_unlock(&ov7740->mutex);
+ return ret;
+
+err_rpm_put:
+ pm_runtime_put(&client->dev);
+err_unlock:
+ mutex_unlock(&ov7740->mutex);
+ return ret;
+}
+
+static int ov7740_get_parm(struct v4l2_subdev *sd,
+ struct v4l2_streamparm *parms)
+{
+ struct v4l2_captureparm *cp = &parms->parm.capture;
+ struct v4l2_fract *tpf = &cp->timeperframe;
+
+ if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ memset(cp, 0, sizeof(struct v4l2_captureparm));
+ cp->capability = V4L2_CAP_TIMEPERFRAME;
+
+ tpf->numerator = 1;
+ tpf->denominator = 60;
+
+ return 0;
+}
+
+static int ov7740_set_parm(struct v4l2_subdev *sd,
+ struct v4l2_streamparm *parms)
+{
+ struct v4l2_captureparm *cp = &parms->parm.capture;
+ struct v4l2_fract *tpf = &cp->timeperframe;
+
+ if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+ if (cp->extendedmode != 0)
+ return -EINVAL;
+
+ cp->capability = V4L2_CAP_TIMEPERFRAME;
+
+ tpf->numerator = 1;
+ tpf->denominator = 60;
+
+ return 0;
+}
+
+static struct v4l2_subdev_video_ops ov7740_subdev_video_ops = {
+ .s_stream = ov7740_set_stream,
+ .s_parm = ov7740_set_parm,
+ .g_parm = ov7740_get_parm,
+};
+
+static const struct reg_sequence ov7740_format_yuyv[] = {
+ {0x12, 0x00},
+ {0x36, 0x3f},
+ {0x80, 0x7f},
+ {0x83, 0x01},
+};
+
+static const struct reg_sequence ov7740_format_bggr8[] = {
+ {0x36, 0x2f},
+ {0x80, 0x01},
+ {0x83, 0x04},
+};
+
+static const struct ov7740_pixfmt ov7740_formats[] = {
+ {
+ .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .regs = ov7740_format_yuyv,
+ .reg_num = ARRAY_SIZE(ov7740_format_yuyv),
+ },
+ {
+ .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .regs = ov7740_format_bggr8,
+ .reg_num = ARRAY_SIZE(ov7740_format_bggr8),
+ }
+};
+#define N_OV7740_FMTS ARRAY_SIZE(ov7740_formats)
+
+static int ov7740_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->pad || code->index >= N_OV7740_FMTS)
+ return -EINVAL;
+
+ code->code = ov7740_formats[code->index].mbus_code;
+
+ return 0;
+}
+
+static int ov7740_enum_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_interval_enum *fie)
+{
+ if (fie->pad)
+ return -EINVAL;
+
+ if (fie->index >= 1)
+ return -EINVAL;
+
+ if ((fie->width != VGA_WIDTH) || (fie->height != VGA_HEIGHT))
+ return -EINVAL;
+
+ fie->interval.numerator = 1;
+ fie->interval.denominator = 60;
+
+ return 0;
+}
+
+static int ov7740_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ if (fse->pad)
+ return -EINVAL;
+
+ if (fse->index > 0)
+ return -EINVAL;
+
+ fse->min_width = fse->max_width = VGA_WIDTH;
+ fse->min_height = fse->max_height = VGA_HEIGHT;
+
+ return 0;
+}
+
+static int ov7740_try_fmt_internal(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *fmt,
+ const struct ov7740_pixfmt **ret_fmt,
+ const struct ov7740_framesize **ret_frmsize)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+ const struct ov7740_framesize *fsize = &ov7740_framesizes[0];
+ int index, i;
+
+ for (index = 0; index < N_OV7740_FMTS; index++) {
+ if (ov7740_formats[index].mbus_code == fmt->code)
+ break;
+ }
+ if (index >= N_OV7740_FMTS) {
+ /* default to first format */
+ index = 0;
+ fmt->code = ov7740_formats[0].mbus_code;
+ }
+ if (ret_fmt != NULL)
+ *ret_fmt = ov7740_formats + index;
+
+ for (i = 0; i < ARRAY_SIZE(ov7740_framesizes); i++) {
+ if ((fsize->width >= fmt->width) &&
+ (fsize->height >= fmt->height)) {
+ fmt->width = fsize->width;
+ fmt->height = fsize->height;
+ break;
+ }
+
+ fsize++;
+ }
+
+ if (ret_frmsize != NULL)
+ *ret_frmsize = fsize;
+
+ fmt->field = V4L2_FIELD_NONE;
+ fmt->colorspace = ov7740_formats[index].colorspace;
+
+ ov7740->format = *fmt;
+
+ return 0;
+}
+
+static int ov7740_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+ const struct ov7740_pixfmt *ovfmt;
+ const struct ov7740_framesize *fsize;
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+ struct v4l2_mbus_framefmt *mbus_fmt;
+#endif
+ int ret;
+
+ mutex_lock(&ov7740->mutex);
+ if (format->pad) {
+ ret = -EINVAL;
+ goto error;
+ }
+
+ if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+ ret = ov7740_try_fmt_internal(sd, &format->format, NULL, NULL);
+ if (ret)
+ goto error;
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+ mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
+ *mbus_fmt = format->format;
+
+ mutex_unlock(&ov7740->mutex);
+ return 0;
+#else
+ ret = -ENOTTY;
+ goto error;
+#endif
+ }
+
+ ret = ov7740_try_fmt_internal(sd, &format->format, &ovfmt, &fsize);
+ if (ret)
+ goto error;
+
+ ov7740->fmt = ovfmt;
+ ov7740->frmsize = fsize;
+
+ mutex_unlock(&ov7740->mutex);
+ return 0;
+
+error:
+ mutex_unlock(&ov7740->mutex);
+ return ret;
+}
+
+static int ov7740_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+ struct v4l2_mbus_framefmt *mbus_fmt;
+#endif
+ int ret = 0;
+
+ mutex_lock(&ov7740->mutex);
+ if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+ mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
+ format->format = *mbus_fmt;
+ ret = 0;
+#else
+ ret = -ENOTTY;
+#endif
+ } else {
+ format->format = ov7740->format;
+ }
+ mutex_unlock(&ov7740->mutex);
+
+ return ret;
+}
+
+static const struct v4l2_subdev_pad_ops ov7740_subdev_pad_ops = {
+ .enum_frame_interval = ov7740_enum_frame_interval,
+ .enum_frame_size = ov7740_enum_frame_size,
+ .enum_mbus_code = ov7740_enum_mbus_code,
+ .get_fmt = ov7740_get_fmt,
+ .set_fmt = ov7740_set_fmt,
+};
+
+static const struct v4l2_subdev_ops ov7740_subdev_ops = {
+ .core = &ov7740_subdev_core_ops,
+ .video = &ov7740_subdev_video_ops,
+ .pad = &ov7740_subdev_pad_ops,
+};
+
+static void ov7740_get_default_format(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *format)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+
+ format->width = ov7740->frmsize->width;
+ format->height = ov7740->frmsize->height;
+ format->colorspace = ov7740->fmt->colorspace;
+ format->code = ov7740->fmt->mbus_code;
+ format->field = V4L2_FIELD_NONE;
+}
+
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+static int ov7740_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+ struct v4l2_mbus_framefmt *format =
+ v4l2_subdev_get_try_format(sd, fh->pad, 0);
+
+ mutex_lock(&ov7740->mutex);
+ ov7740_get_default_format(sd, format);
+ mutex_unlock(&ov7740->mutex);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_internal_ops ov7740_subdev_internal_ops = {
+ .open = ov7740_open,
+};
+#endif
+
+static int ov7740_probe_dt(struct i2c_client *client,
+ struct ov7740 *ov7740)
+{
+ ov7740->resetb_gpio = devm_gpiod_get_optional(&client->dev, "reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(ov7740->resetb_gpio)) {
+ dev_info(&client->dev, "can't get %s GPIO\n", "reset");
+ return PTR_ERR(ov7740->resetb_gpio);
+ }
+
+ ov7740->pwdn_gpio = devm_gpiod_get_optional(&client->dev, "powerdown",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(ov7740->pwdn_gpio)) {
+ dev_info(&client->dev, "can't get %s GPIO\n", "powerdown");
+ return PTR_ERR(ov7740->pwdn_gpio);
+ }
+
+ return 0;
+}
+
+static int ov7740_detect(struct ov7740 *ov7740)
+{
+ struct regmap *regmap = ov7740->regmap;
+ unsigned int midh, midl, pidh, pidl;
+ int ret;
+
+ ret = regmap_read(regmap, REG_MIDH, &midh);
+ if (ret)
+ return ret;
+ if (midh != 0x7f)
+ return -ENODEV;
+
+ ret = regmap_read(regmap, REG_MIDL, &midl);
+ if (ret)
+ return ret;
+ if (midl != 0xa2)
+ return -ENODEV;
+
+ ret = regmap_read(regmap, REG_PIDH, &pidh);
+ if (ret)
+ return ret;
+ if (pidh != 0x77)
+ return -ENODEV;
+
+ ret = regmap_read(regmap, REG_PIDL, &pidl);
+ if (ret)
+ return ret;
+ if ((pidl != 0x40) && (pidl != 0x41) && (pidl != 0x42))
+ return -ENODEV;
+
+ return 0;
+}
+
+static int ov7740_init_controls(struct ov7740 *ov7740)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&ov7740->subdev);
+ struct v4l2_ctrl_handler *ctrl_hdlr = &ov7740->ctrl_handler;
+ int ret;
+
+ ret = v4l2_ctrl_handler_init(ctrl_hdlr, 2);
+ if (ret < 0)
+ return ret;
+
+ ctrl_hdlr->lock = &ov7740->mutex;
+ ov7740->auto_wb = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_AUTO_WHITE_BALANCE,
+ 0, 1, 1, 1);
+ ov7740->blue_balance = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_BLUE_BALANCE,
+ 0, 0xff, 1, 0x80);
+ ov7740->red_balance = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_RED_BALANCE,
+ 0, 0xff, 1, 0x80);
+
+ ov7740->brightness = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_BRIGHTNESS,
+ -255, 255, 1, 0);
+ ov7740->contrast = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_CONTRAST,
+ 0, 127, 1, 0x20);
+ ov7740->saturation = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_SATURATION, 0, 256, 1, 0x80);
+ ov7740->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ ov7740->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ ov7740->gain = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_GAIN, 0, 1023, 1, 500);
+ ov7740->auto_gain = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+ ov7740->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &ov7740_ctrl_ops,
+ V4L2_CID_EXPOSURE, 0, 65535, 1, 500);
+ ov7740->auto_exposure = v4l2_ctrl_new_std_menu(ctrl_hdlr,
+ &ov7740_ctrl_ops,
+ V4L2_CID_EXPOSURE_AUTO,
+ V4L2_EXPOSURE_MANUAL, 0,
+ V4L2_EXPOSURE_AUTO);
+
+ ov7740->gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
+ ov7740->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
+
+ v4l2_ctrl_auto_cluster(3, &ov7740->auto_wb, 0, false);
+ v4l2_ctrl_auto_cluster(2, &ov7740->auto_gain, 0, true);
+ v4l2_ctrl_auto_cluster(2, &ov7740->auto_exposure,
+ V4L2_EXPOSURE_MANUAL, false);
+ v4l2_ctrl_cluster(2, &ov7740->hflip);
+
+ ret = v4l2_ctrl_handler_setup(ctrl_hdlr);
+ if (ret) {
+ dev_err(&client->dev, "%s control init failed (%d)\n",
+ __func__, ret);
+ goto error;
+ }
+
+ ov7740->subdev.ctrl_handler = ctrl_hdlr;
+ return 0;
+
+error:
+ v4l2_ctrl_handler_free(ctrl_hdlr);
+ mutex_destroy(&ov7740->mutex);
+ return ret;
+}
+
+static void ov7740_free_controls(struct ov7740 *ov7740)
+{
+ v4l2_ctrl_handler_free(ov7740->subdev.ctrl_handler);
+ mutex_destroy(&ov7740->mutex);
+}
+
+#define OV7740_MAX_REGISTER 0xff
+static const struct regmap_config ov7740_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = OV7740_MAX_REGISTER,
+};
+
+static int ov7740_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ov7740 *ov7740;
+ struct v4l2_subdev *sd;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev,
+ "OV7740: I2C-Adapter doesn't support SMBUS\n");
+ return -EIO;
+ }
+
+ ov7740 = devm_kzalloc(&client->dev, sizeof(*ov7740), GFP_KERNEL);
+ if (!ov7740)
+ return -ENOMEM;
+
+ ov7740->xvclk = devm_clk_get(&client->dev, "xvclk");
+ if (IS_ERR(ov7740->xvclk)) {
+ ret = PTR_ERR(ov7740->xvclk);
+ dev_err(&client->dev,
+ "OV7740: fail to get xvclk: %d\n", ret);
+ return ret;
+ }
+
+ ret = ov7740_probe_dt(client, ov7740);
+ if (ret)
+ return ret;
+
+ ov7740->regmap = devm_regmap_init_i2c(client, &ov7740_regmap_config);
+ if (IS_ERR(ov7740->regmap)) {
+ ret = PTR_ERR(ov7740->regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ sd = &ov7740->subdev;
+ client->flags |= I2C_CLIENT_SCCB;
+ v4l2_i2c_subdev_init(sd, client, &ov7740_subdev_ops);
+
+#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
+ sd->internal_ops = &ov7740_subdev_internal_ops;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+#endif
+
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ ov7740->pad.flags = MEDIA_PAD_FL_SOURCE;
+ sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
+ ret = media_entity_pads_init(&sd->entity, 1, &ov7740->pad);
+ if (ret)
+ return ret;
+#endif
+
+ ret = ov7740_set_power(ov7740, 1);
+ if (ret)
+ return ret;
+
+ ret = ov7740_detect(ov7740);
+ if (ret)
+ goto error_detect;
+
+ mutex_init(&ov7740->mutex);
+
+ ret = ov7740_init_controls(ov7740);
+ if (ret)
+ goto error_init_controls;
+
+ v4l_info(client, "chip found @ 0x%02x (%s)\n",
+ client->addr << 1, client->adapter->name);
+
+ ov7740->fmt = &ov7740_formats[0];
+ ov7740->frmsize = &ov7740_framesizes[0];
+
+ ov7740_get_default_format(sd, &ov7740->format);
+
+ ret = v4l2_async_register_subdev(sd);
+ if (ret)
+ goto error_async_register;
+
+ pm_runtime_set_active(&client->dev);
+ pm_runtime_enable(&client->dev);
+ pm_runtime_idle(&client->dev);
+
+ return 0;
+
+error_async_register:
+ v4l2_ctrl_handler_free(ov7740->subdev.ctrl_handler);
+error_init_controls:
+ ov7740_free_controls(ov7740);
+error_detect:
+ ov7740_set_power(ov7740, 0);
+ media_entity_cleanup(&ov7740->subdev.entity);
+
+ return ret;
+}
+
+static int ov7740_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+
+ mutex_destroy(&ov7740->mutex);
+ v4l2_ctrl_handler_free(ov7740->subdev.ctrl_handler);
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ media_entity_cleanup(&ov7740->subdev.entity);
+#endif
+ v4l2_async_unregister_subdev(sd);
+ ov7740_free_controls(ov7740);
+
+ pm_runtime_get_sync(&client->dev);
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+ pm_runtime_put_noidle(&client->dev);
+
+ ov7740_set_power(ov7740, 0);
+ return 0;
+}
+
+static int __maybe_unused ov7740_runtime_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+
+ ov7740_set_power(ov7740, 0);
+
+ return 0;
+}
+
+static int __maybe_unused ov7740_runtime_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct ov7740 *ov7740 = container_of(sd, struct ov7740, subdev);
+
+ return ov7740_set_power(ov7740, 1);
+}
+
+static const struct i2c_device_id ov7740_id[] = {
+ { "ov7740", 0 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, ov7740_id);
+
+static const struct dev_pm_ops ov7740_pm_ops = {
+ SET_RUNTIME_PM_OPS(ov7740_runtime_suspend, ov7740_runtime_resume, NULL)
+};
+
+static const struct of_device_id ov7740_of_match[] = {
+ {.compatible = "ovti,ov7740", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ov7740_of_match);
+
+static struct i2c_driver ov7740_i2c_driver = {
+ .driver = {
+ .name = "ov7740",
+ .pm = &ov7740_pm_ops,
+ .of_match_table = of_match_ptr(ov7740_of_match),
+ },
+ .probe = ov7740_probe,
+ .remove = ov7740_remove,
+ .id_table = ov7740_id,
+};
+module_i2c_driver(ov7740_i2c_driver);
+
+MODULE_DESCRIPTION("The V4L2 driver for Omnivision 7740 sensor");
+MODULE_AUTHOR("Songjun Wu <songjun.wu@atmel.com>");
+MODULE_LICENSE("GPL v2");
--
2.15.0
^ permalink raw reply related
* [PATCH v9 1/2] media: ov7740: Document device tree bindings
From: Wenyou Yang @ 2017-12-11 1:31 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211013146.2497-1-wenyou.yang@microchip.com>
Add the device tree binding documentation for the ov7740 sensor driver.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v9: None
Changes in v8: None
Changes in v7:
- Add Acked-by tag.
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Explicitly document the "remote-endpoint" property.
Changes in v2: None
.../devicetree/bindings/media/i2c/ov7740.txt | 47 ++++++++++++++++++++++
1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov7740.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ov7740.txt b/Documentation/devicetree/bindings/media/i2c/ov7740.txt
new file mode 100644
index 000000000000..af781c3a5f0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov7740.txt
@@ -0,0 +1,47 @@
+* Omnivision OV7740 CMOS image sensor
+
+The Omnivision OV7740 image sensor supports multiple output image
+size, such as VGA, and QVGA, CIF and any size smaller. It also
+supports the RAW RGB and YUV output formats.
+
+The common video interfaces bindings (see video-interfaces.txt) should
+be used to specify link to the image data receiver. The OV7740 device
+node should contain one 'port' child node with an 'endpoint' subnode.
+
+Required Properties:
+- compatible: "ovti,ov7740".
+- reg: I2C slave address of the sensor.
+- clocks: Reference to the xvclk input clock.
+- clock-names: "xvclk".
+
+Optional Properties:
+- reset-gpios: Rreference to the GPIO connected to the reset_b pin,
+ if any. Active low with pull-ip resistor.
+- powerdown-gpios: Reference to the GPIO connected to the pwdn pin,
+ if any. Active high with pull-down resistor.
+
+Endpoint node mandatory properties:
+- remote-endpoint: A phandle to the bus receiver's endpoint node.
+
+Example:
+
+ i2c1: i2c at fc028000 {
+ ov7740: camera at 21 {
+ compatible = "ovti,ov7740";
+ reg = <0x21>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sensor_power &pinctrl_sensor_reset>;
+ clocks = <&isc>;
+ clock-names = "xvclk";
+ assigned-clocks = <&isc>;
+ assigned-clock-rates = <24000000>;
+ reset-gpios = <&pioA 43 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&pioA 44 GPIO_ACTIVE_HIGH>;
+
+ port {
+ ov7740_0: endpoint {
+ remote-endpoint = <&isc_0>;
+ };
+ };
+ };
+ };
--
2.15.0
^ permalink raw reply related
* [PATCH v9 0/2] media: ov7740: Add a V4L2 sensor-level driver
From: Wenyou Yang @ 2017-12-11 1:31 UTC (permalink / raw)
To: linux-arm-kernel
Add a Video4Linux2 sensor-level driver for the OmniVision OV7740
VGA camera image sensor.
Changes in v9:
- Use the new SPDX ids.
Changes in v8:
- As the registers are written at stream start, remove the written
code from the set fmt function.
Changes in v7:
- Add Acked-by tag.
- Fix the wrong handle of default register configuration.
- Add the missed assignment of ov7740->frmsize.
Changes in v6:
- Remove unnecessary #include <linux/init>.
- Remove unnecessary comments and extra newline.
- Add const for some structures.
- Add the check of the return value from regmap_write().
- Simplify the calling of __v4l2_ctrl_handler_setup().
- Add the default format initialization function.
- Integrate the set_power() and enable/disable the clock into
one function.
Changes in v5:
- Squash the driver and MAINTAINERS entry patches to one.
- Precede the driver patch with the bindings patch.
Changes in v4:
- Assign 'val' a initial value to avoid warning: 'val' may be
used uninitialized.
- Rename REG_REG15 to avoid warning: "REG_REG15" redefined.
Changes in v3:
- Explicitly document the "remote-endpoint" property.
- Put the MAINTAINERS change to a separate patch.
Changes in v2:
- Split off the bindings into a separate patch.
- Add a new entry to the MAINTAINERS file.
Wenyou Yang (2):
media: ov7740: Document device tree bindings
media: i2c: Add the ov7740 image sensor driver
.../devicetree/bindings/media/i2c/ov7740.txt | 47 +
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 8 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov7740.c | 1216 ++++++++++++++++++++
5 files changed, 1280 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov7740.txt
create mode 100644 drivers/media/i2c/ov7740.c
--
2.15.0
^ permalink raw reply
* WARNING: suspicious RCU usage
From: Paul E. McKenney @ 2017-12-10 23:16 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171210215433.GQ10595@n2100.armlinux.org.uk>
On Sun, Dec 10, 2017 at 09:54:33PM +0000, Russell King - ARM Linux wrote:
> On Sun, Dec 10, 2017 at 01:39:30PM -0800, Paul E. McKenney wrote:
> > On Sun, Dec 10, 2017 at 07:34:39PM +0000, Russell King - ARM Linux wrote:
> > > On Sun, Dec 10, 2017 at 11:07:27AM -0800, Paul E. McKenney wrote:
> > > > On Sun, Dec 10, 2017 at 12:00:12PM +0000, Russell King - ARM Linux wrote:
> > > > > +Paul
> > > > >
> > > > > Annoyingly, it looks like calling "complete()" from a dying CPU is
> > > > > triggering the RCU usage warning. From what I remember, this is an
> > > > > old problem, and we still have no better solution for this other than
> > > > > to persist with the warning.
> > > >
> > > > I thought that this issue was resolved with tglx's use of IPIs from
> > > > the outgoing CPU. Or is this due to an additional complete() from the
> > > > ARM code? If so, could it also use tglx's IPI trick?
> > >
> > > I don't think it was tglx's IPI trick, I've had code sitting in my tree
> > > for a while for it, but it has its own set of problems which are not
> > > resolvable:
> > >
> > > 1. it needs more IPIs than we have available on all platforms
> >
> > OK, I will ask the stupid question... Is it possible to multiplex
> > the IPIs, for example, by using smp_call_function_single()?
> >
> > > 2. there's some optional locking in the GIC driver that cause problems
> > > for the cpu dying path.
> >
> > On this, I must plead ignorance.
> >
> > > The concensus last time around was that the IPI solution is a non-
> > > starter, so the seven year proven-reliable solution (disregarding the
> > > RCU warning) persists because I don't think anyone came up with a
> > > better solution.
> >
> > Seven years already? Sigh, I don't have the heart to check because
> > I wouldn't want to find out that it has actually been longer. ;-)
>
> *Sigh* thanks for what you just said, you do realise that you've just
> said that you don't believe what I write in emails? FFS. Is there
> any point in continuing to discuss this if that's the case? Really?
Sorry to have offended you. I will leave this matter in your hands.
Thanx, Paul
> commit 3c030beabf937b1d3b4ecaedfd1fb2f1e2aa0c70
> Author: Russell King <rmk+kernel@arm.linux.org.uk>
> Date: Tue Nov 30 11:07:35 2010 +0000
>
> ARM: CPU hotplug: move cpu_killed completion to core code
>
> We always need to wait for the dying CPU to reach a safe state before
> taking it down, irrespective of the requirements of the platform.
> Move the completion code into the ARM SMP hotplug code rather than
> having each platform re-implement this.
>
> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
>
> diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
> index a30c4094db3a..8c81ff9b3732 100644
> --- a/arch/arm/kernel/smp.c
> +++ b/arch/arm/kernel/smp.c
> @@ -24,6 +24,7 @@
> #include <linux/irq.h>
> #include <linux/percpu.h>
> #include <linux/clockchips.h>
> +#include <linux/completion.h>
>
> #include <asm/atomic.h>
> #include <asm/cacheflush.h>
> @@ -238,12 +239,20 @@ int __cpu_disable(void)
> return 0;
> }
>
> +static DECLARE_COMPLETION(cpu_died);
> +
> /*
> * called on the thread which is asking for a CPU to be shutdown -
> * waits until shutdown has completed, or it is timed out.
> */
> void __cpu_die(unsigned int cpu)
> {
> + if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
> + pr_err("CPU%u: cpu didn't die\n", cpu);
> + return;
> + }
> + printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
> +
> if (!platform_cpu_kill(cpu))
> printk("CPU%u: unable to kill\n", cpu);
> }
> @@ -263,9 +272,12 @@ void __ref cpu_die(void)
> local_irq_disable();
> idle_task_exit();
>
> + /* Tell __cpu_die() that this CPU is now safe to dispose of */
> + complete(&cpu_died);
> +
> /*
> * actual CPU shutdown procedure is at least platform (if not
> - * CPU) specific
> + * CPU) specific.
> */
> platform_cpu_die(cpu);
>
>
> So, 30th Nov 2010 to 10th Dec 2017 is seven years, one week and three
> days to be exact.
>
> --
> RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
> FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
> According to speedtest.net: 8.21Mbps down 510kbps up
>
^ permalink raw reply
* [PATCH net-next 1/2 v8] net: ethernet: Add DT bindings for the Gemini ethernet
From: Linus Walleij @ 2017-12-10 22:45 UTC (permalink / raw)
To: linux-arm-kernel
This adds the device tree bindings for the Gemini ethernet
controller. It is pretty straight-forward, using standard
bindings and modelling the two child ports as child devices
under the parent ethernet controller device.
Cc: devicetree at vger.kernel.org
Cc: Tobias Waldvogel <tobias.waldvogel@gmail.com>
Cc: Micha? Miros?aw <mirq-linux@rere.qmqm.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v7->v8:
- Use ethernet-port at 0 and ethernet-port at 1 with unit names
and following OF graph requirements.
---
.../bindings/net/cortina,gemini-ethernet.txt | 92 ++++++++++++++++++++++
1 file changed, 92 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
new file mode 100644
index 000000000000..6c559981d110
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
@@ -0,0 +1,92 @@
+Cortina Systems Gemini Ethernet Controller
+==========================================
+
+This ethernet controller is found in the Gemini SoC family:
+StorLink SL3512 and SL3516, also known as Cortina Systems
+CS3512 and CS3516.
+
+Required properties:
+- compatible: must be "cortina,gemini-ethernet"
+- reg: must contain the global registers and the V-bit and A-bit
+ memory areas, in total three register sets.
+- syscon: a phandle to the system controller
+- #address-cells: must be specified, must be <1>
+- #size-cells: must be specified, must be <1>
+- ranges: should be state like this giving a 1:1 address translation
+ for the subnodes
+
+The subnodes represents the two ethernet ports in this device.
+They are not independent of each other since they share resources
+in the parent node, and are thus children.
+
+Required subnodes:
+- port0: contains the resources for ethernet port 0
+- port1: contains the resources for ethernet port 1
+
+Required subnode properties:
+- compatible: must be "cortina,gemini-ethernet-port"
+- reg: must contain two register areas: the DMA/TOE memory and
+ the GMAC memory area of the port
+- interrupts: should contain the interrupt line of the port.
+ this is nominally a level interrupt active high.
+- resets: this must provide an SoC-integrated reset line for
+ the port.
+- clocks: this should contain a handle to the PCLK clock for
+ clocking the silicon in this port
+- clock-names: must be "PCLK"
+
+Optional subnode properties:
+- phy-mode: see ethernet.txt
+- phy-handle: see ethernet.txt
+
+Example:
+
+mdio-bus {
+ (...)
+ phy0: ethernet-phy at 1 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy at 3 {
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+};
+
+
+ethernet at 60000000 {
+ compatible = "cortina,gemini-ethernet";
+ reg = <0x60000000 0x4000>, /* Global registers, queue */
+ <0x60004000 0x2000>, /* V-bit */
+ <0x60006000 0x2000>; /* A-bit */
+ syscon = <&syscon>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gmac0: ethernet-port at 0 {
+ compatible = "cortina,gemini-ethernet-port";
+ reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+ <0x6000a000 0x2000>; /* Port 0 GMAC */
+ interrupt-parent = <&intcon>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&syscon GEMINI_RESET_GMAC0>;
+ clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+ clock-names = "PCLK";
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+
+ gmac1: ethernet-port at 1 {
+ compatible = "cortina,gemini-ethernet-port";
+ reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+ <0x6000e000 0x2000>; /* Port 1 GMAC */
+ interrupt-parent = <&intcon>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&syscon GEMINI_RESET_GMAC1>;
+ clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+ clock-names = "PCLK";
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+};
--
2.14.3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox