* [RESEND PATCH v2 13/15] dt-bindings: sound: qcom: Add devicetree bindings for apq8096
From: srinivas.kandagatla at linaro.org @ 2017-12-14 17:34 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171214173402.19074-1-srinivas.kandagatla@linaro.org>
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Add devicetree bindings documentation file for Qualcomm apq8096 sound card.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
.../devicetree/bindings/sound/qcom,apq8096.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8096.txt
diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
new file mode 100644
index 000000000000..27b511dab533
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
@@ -0,0 +1,22 @@
+* Qualcomm Technologies APQ8096 ASoC sound card driver
+
+This binding describes the APQ8096 sound card, which uses qdsp for audio.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,apq8096-sndcard"
+
+- qcom,audio-routing:
+ Usage: Optional
+ Value type: <stringlist>
+ Definition: A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the
+ connection's sink, the second being the connection's
+ source. Valid names could be power supplies, MicBias
+ of codec and the jacks on the board:
+Example:
+ sound {
+ compatible = "qcom,snd-apq8096";
+ qcom,model = "DB820c";
+ };
--
2.15.0
^ permalink raw reply related
* [RESEND PATCH v2 12/15] ASoC: qcom: qdsp6: Add support to q6asm dai driver
From: srinivas.kandagatla at linaro.org @ 2017-12-14 17:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171214173402.19074-1-srinivas.kandagatla@linaro.org>
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch adds support to q6asm dai driver which configures Q6ASM streams
to pass pcm data.
Currently the driver only exposes 2 playback streams for hdmi playback
support, it can be easily extended to add all 8 streams.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
sound/soc/qcom/Kconfig | 6 +
sound/soc/qcom/qdsp6/Makefile | 1 +
sound/soc/qcom/qdsp6/q6asm-dai.c | 534 +++++++++++++++++++++++++++++++++++++++
3 files changed, 541 insertions(+)
create mode 100644 sound/soc/qcom/qdsp6/q6asm-dai.c
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 003ce182691c..ecd1e4ba834d 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -68,6 +68,11 @@ config SND_SOC_QDSP6_AFE_DAI
tristate
default n
+config SND_SOC_QDSP6_ASM_DAI
+ tristate
+ default n
+
+
config SND_SOC_QDSP6
tristate "SoC ALSA audio driver for QDSP6"
select SND_SOC_QDSP6_AFE
@@ -76,6 +81,7 @@ config SND_SOC_QDSP6
select SND_SOC_QDSP6_CORE
select SND_SOC_QDSP6_ROUTING
select SND_SOC_QDSP6_AFE_DAI
+ select SND_SOC_QDSP6_ASM_DAI
help
To add support for MSM QDSP6 Soc Audio.
This will enable sound soc platform specific
diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile
index bd8bd02bf09e..03576a442fb5 100644
--- a/sound/soc/qcom/qdsp6/Makefile
+++ b/sound/soc/qcom/qdsp6/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_SND_SOC_QDSP6_ASM) += q6asm.o
obj-$(CONFIG_SND_SOC_QDSP6_CORE) += q6core.o
obj-$(CONFIG_SND_SOC_QDSP6_ROUTING) += q6routing.o
obj-$(CONFIG_SND_SOC_QDSP6_AFE_DAI) += q6afe-dai.o
+obj-$(CONFIG_SND_SOC_QDSP6_ASM_DAI) += q6asm-dai.o
diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c
new file mode 100644
index 000000000000..709c5de230fa
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6asm-dai.c
@@ -0,0 +1,534 @@
+/* SPDX-License-Identifier: GPL-2.0
+* Copyright (c) 2011-2016, The Linux Foundation
+* Copyright (c) 2017, Linaro Limited
+*/
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/pcm.h>
+#include <asm/dma.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_device.h>
+#include <sound/pcm_params.h>
+#include "q6asm.h"
+#include "q6routing.h"
+#include "common.h"
+
+#define PLAYBACK_MIN_NUM_PERIODS 2
+#define PLAYBACK_MAX_NUM_PERIODS 8
+#define PLAYBACK_MAX_PERIOD_SIZE 65536
+#define PLAYBACK_MIN_PERIOD_SIZE 128
+
+enum stream_state {
+ IDLE = 0,
+ STOPPED,
+ RUNNING,
+};
+
+struct q6asm_dai_rtd {
+ struct snd_pcm_substream *substream;
+ dma_addr_t phys;
+ unsigned int pcm_size;
+ unsigned int pcm_count;
+ unsigned int pcm_irq_pos; /* IRQ position */
+ unsigned int periods;
+ uint16_t bits_per_sample;
+ uint16_t source; /* Encoding source bit mask */
+
+ struct audio_client *audio_client;
+ uint16_t session_id;
+
+ enum stream_state state;
+ bool set_channel_map;
+ char channel_map[8];
+};
+
+struct q6asm_dai_data {
+ u64 sid;
+};
+
+static struct snd_pcm_hardware q6asm_dai_hardware_playback = {
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME),
+ .formats = (SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_LE),
+ .rates = SNDRV_PCM_RATE_8000_192000,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ .channels_min = 1,
+ .channels_max = 8,
+ .buffer_bytes_max = (PLAYBACK_MAX_NUM_PERIODS *
+ PLAYBACK_MAX_PERIOD_SIZE),
+ .period_bytes_min = PLAYBACK_MIN_PERIOD_SIZE,
+ .period_bytes_max = PLAYBACK_MAX_PERIOD_SIZE,
+ .periods_min = PLAYBACK_MIN_NUM_PERIODS,
+ .periods_max = PLAYBACK_MAX_NUM_PERIODS,
+ .fifo_size = 0,
+};
+
+/* Conventional and unconventional sample rate supported */
+static unsigned int supported_sample_rates[] = {
+ 8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000,
+ 88200, 96000, 176400, 192000
+};
+
+static struct snd_pcm_hw_constraint_list constraints_sample_rates = {
+ .count = ARRAY_SIZE(supported_sample_rates),
+ .list = supported_sample_rates,
+ .mask = 0,
+};
+
+static void event_handler(uint32_t opcode, uint32_t token,
+ uint32_t *payload, void *priv)
+{
+ struct q6asm_dai_rtd *prtd = priv;
+ struct snd_pcm_substream *substream = prtd->substream;
+
+ switch (opcode) {
+ case ASM_CLIENT_EVENT_CMD_RUN_DONE:
+ q6asm_write_nolock(prtd->audio_client,
+ prtd->pcm_count, 0, 0, NO_TIMESTAMP);
+ break;
+ case ASM_CLIENT_EVENT_CMD_EOS_DONE:
+ prtd->state = STOPPED;
+ break;
+ case ASM_CLIENT_EVENT_DATA_WRITE_DONE: {
+ prtd->pcm_irq_pos += prtd->pcm_count;
+ snd_pcm_period_elapsed(substream);
+ if (prtd->state == RUNNING)
+ q6asm_write_nolock(prtd->audio_client,
+ prtd->pcm_count, 0, 0, NO_TIMESTAMP);
+
+ break;
+ }
+ default:
+ break;
+ }
+}
+
+static int q6asm_dai_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_soc_pcm_runtime *soc_prtd = substream->private_data;
+ struct q6asm_dai_rtd *prtd = runtime->private_data;
+ struct q6asm_dai_data *pdata;
+ int ret;
+
+ pdata = dev_get_drvdata(soc_prtd->platform->dev);
+ if (!pdata)
+ return -EINVAL;
+
+ if (!prtd || !prtd->audio_client) {
+ pr_err("%s: private data null or audio client freed\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ prtd->pcm_count = snd_pcm_lib_period_bytes(substream);
+ prtd->pcm_irq_pos = 0;
+ /* rate and channels are sent to audio driver */
+ if (prtd->state) {
+ /* clear the previous setup if any */
+ q6asm_cmd(prtd->audio_client, CMD_CLOSE);
+ q6asm_unmap_memory_regions(substream->stream,
+ prtd->audio_client);
+ q6routing_dereg_phy_stream(soc_prtd->dai_link->id,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ }
+
+ ret = q6asm_map_memory_regions(substream->stream, prtd->audio_client,
+ prtd->phys,
+ (prtd->pcm_size / prtd->periods),
+ prtd->periods);
+
+ if (ret < 0) {
+ pr_err("Audio Start: Buffer Allocation failed rc = %d\n",
+ ret);
+ return -ENOMEM;
+ }
+
+ ret = q6asm_open_write(prtd->audio_client, FORMAT_LINEAR_PCM,
+ prtd->bits_per_sample);
+ if (ret < 0) {
+ pr_err("%s: q6asm_open_write failed\n", __func__);
+ q6asm_audio_client_free(prtd->audio_client);
+ prtd->audio_client = NULL;
+ return -ENOMEM;
+ }
+
+ prtd->session_id = q6asm_get_session_id(prtd->audio_client);
+ ret = q6routing_reg_phy_stream(soc_prtd->dai_link->id, LEGACY_PCM_MODE,
+ prtd->session_id, substream->stream);
+ if (ret) {
+ pr_err("%s: stream reg failed ret:%d\n", __func__, ret);
+ return ret;
+ }
+
+ ret = q6asm_media_format_block_multi_ch_pcm(
+ prtd->audio_client, runtime->rate,
+ runtime->channels, !prtd->set_channel_map,
+ prtd->channel_map, prtd->bits_per_sample);
+ if (ret < 0)
+ pr_info("%s: CMD Format block failed\n", __func__);
+
+ prtd->state = RUNNING;
+
+ return 0;
+}
+
+static int q6asm_dai_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ int ret = 0;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct q6asm_dai_rtd *prtd = runtime->private_data;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ ret = q6asm_run_nowait(prtd->audio_client, 0, 0, 0);
+ break;
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ ret = q6asm_run_nowait(prtd->audio_client, 0, 0, 0);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ prtd->state = STOPPED;
+ ret = q6asm_cmd_nowait(prtd->audio_client, CMD_EOS);
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ ret = q6asm_cmd_nowait(prtd->audio_client, CMD_PAUSE);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static int q6asm_dai_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_soc_pcm_runtime *soc_prtd = substream->private_data;
+ struct q6asm_dai_rtd *prtd;
+ struct q6asm_dai_data *pdata;
+ struct device *dev = soc_prtd->platform->dev;
+ int ret = 0;
+
+ pdata = dev_get_drvdata(dev);
+ if (!pdata) {
+ pr_err("Platform data not found ..\n");
+ return -EINVAL;
+ }
+
+ prtd = kzalloc(sizeof(struct q6asm_dai_rtd), GFP_KERNEL);
+ if (prtd == NULL)
+ return -ENOMEM;
+
+ prtd->substream = substream;
+ prtd->audio_client = q6asm_audio_client_alloc(dev,
+ (app_cb)event_handler, prtd);
+ if (!prtd->audio_client) {
+ pr_info("%s: Could not allocate memory\n", __func__);
+ kfree(prtd);
+ return -ENOMEM;
+ }
+
+// prtd->audio_client->dev = dev;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ runtime->hw = q6asm_dai_hardware_playback;
+
+ ret = snd_pcm_hw_constraint_list(runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ &constraints_sample_rates);
+ if (ret < 0)
+ pr_info("snd_pcm_hw_constraint_list failed\n");
+ /* Ensure that buffer size is a multiple of period size */
+ ret = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0)
+ pr_info("snd_pcm_hw_constraint_integer failed\n");
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ ret = snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+ PLAYBACK_MIN_NUM_PERIODS * PLAYBACK_MIN_PERIOD_SIZE,
+ PLAYBACK_MAX_NUM_PERIODS * PLAYBACK_MAX_PERIOD_SIZE);
+ if (ret < 0) {
+ pr_err("constraint for buffer bytes min max ret = %d\n",
+ ret);
+ }
+ }
+
+ ret = snd_pcm_hw_constraint_step(runtime, 0,
+ SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 32);
+ if (ret < 0) {
+ pr_err("constraint for period bytes step ret = %d\n",
+ ret);
+ }
+ ret = snd_pcm_hw_constraint_step(runtime, 0,
+ SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 32);
+ if (ret < 0) {
+ pr_err("constraint for buffer bytes step ret = %d\n",
+ ret);
+ }
+
+ prtd->set_channel_map = false;
+ runtime->private_data = prtd;
+
+ snd_soc_set_runtime_hwparams(substream, &q6asm_dai_hardware_playback);
+
+ runtime->dma_bytes = q6asm_dai_hardware_playback.buffer_bytes_max;
+
+
+ if (pdata->sid < 0)
+ prtd->phys = substream->dma_buffer.addr;
+ else
+ prtd->phys = substream->dma_buffer.addr | (pdata->sid << 32);
+
+ snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+
+ return 0;
+}
+
+static int q6asm_dai_close(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_soc_pcm_runtime *soc_prtd = substream->private_data;
+ struct q6asm_dai_rtd *prtd = runtime->private_data;
+
+ if (prtd->audio_client) {
+ q6asm_cmd(prtd->audio_client, CMD_CLOSE);
+ q6asm_unmap_memory_regions(substream->stream,
+ prtd->audio_client);
+ q6asm_audio_client_free(prtd->audio_client);
+ }
+ q6routing_dereg_phy_stream(soc_prtd->dai_link->id,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ kfree(prtd);
+ return 0;
+}
+
+static snd_pcm_uframes_t q6asm_dai_pointer(struct snd_pcm_substream *substream)
+{
+
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct q6asm_dai_rtd *prtd = runtime->private_data;
+
+ if (prtd->pcm_irq_pos >= prtd->pcm_size)
+ prtd->pcm_irq_pos = 0;
+
+ return bytes_to_frames(runtime, (prtd->pcm_irq_pos));
+}
+
+static int q6asm_dai_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *vma)
+{
+
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_soc_pcm_runtime *soc_prtd = substream->private_data;
+ struct snd_card *card = soc_prtd->card->snd_card;
+
+ return dma_mmap_coherent(card->dev, vma,
+ runtime->dma_area, runtime->dma_addr,
+ runtime->dma_bytes);
+}
+
+static int q6asm_dai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct q6asm_dai_rtd *prtd = runtime->private_data;
+
+ prtd->pcm_size = params_buffer_bytes(params);
+ prtd->periods = params_periods(params);
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ prtd->bits_per_sample = 16;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ prtd->bits_per_sample = 24;
+ break;
+ }
+
+ return 0;
+}
+
+static struct snd_pcm_ops q6asm_dai_ops = {
+ .open = q6asm_dai_open,
+ .hw_params = q6asm_dai_hw_params,
+ .close = q6asm_dai_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .prepare = q6asm_dai_prepare,
+ .trigger = q6asm_dai_trigger,
+ .pointer = q6asm_dai_pointer,
+ .mmap = q6asm_dai_mmap,
+};
+
+static int q6asm_dai_pcm_new(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_pcm *pcm = rtd->pcm;
+ struct snd_pcm_substream *substream;
+ struct snd_card *card = rtd->card->snd_card;
+ struct device *dev = card->dev;
+ struct device_node *node = dev->of_node;
+ struct q6asm_dai_data *pdata = dev_get_drvdata(rtd->platform->dev);
+ struct of_phandle_args args;
+
+ int size, ret = 0;
+
+ ret = of_parse_phandle_with_fixed_args(node, "iommus", 1, 0, &args);
+ if (ret < 0)
+ pdata->sid = -1;
+ else
+ pdata->sid = args.args[0];
+
+
+
+ substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
+ size = q6asm_dai_hardware_playback.buffer_bytes_max;
+ ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, dev, size,
+ &substream->dma_buffer);
+ if (ret) {
+ dev_err(dev, "Cannot allocate buffer(s)\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static void q6asm_dai_pcm_free(struct snd_pcm *pcm)
+{
+ struct snd_pcm_substream *substream;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pcm->streams); i++) {
+ substream = pcm->streams[i].substream;
+ if (substream) {
+ snd_dma_free_pages(&substream->dma_buffer);
+ substream->dma_buffer.area = NULL;
+ substream->dma_buffer.addr = 0;
+ }
+ }
+}
+
+static struct snd_soc_platform_driver q6asm_soc_platform = {
+ .ops = &q6asm_dai_ops,
+ .pcm_new = q6asm_dai_pcm_new,
+ .pcm_free = q6asm_dai_pcm_free,
+
+};
+
+static const struct snd_soc_dapm_route afe_pcm_routes[] = {
+ {"MM_DL1", NULL, "MultiMedia1 Playback" },
+ {"MM_DL2", NULL, "MultiMedia2 Playback" },
+
+};
+
+static int fe_dai_probe(struct snd_soc_dai *dai)
+{
+ struct snd_soc_dapm_context *dapm;
+
+ dapm = snd_soc_component_get_dapm(dai->component);
+ snd_soc_dapm_add_routes(dapm, afe_pcm_routes,
+ ARRAY_SIZE(afe_pcm_routes));
+
+ return 0;
+}
+
+static const struct snd_soc_component_driver q6asm_fe_dai_component = {
+ .name = "q6asm-fe-dai",
+};
+
+static struct snd_soc_dai_driver q6asm_fe_dais[] = {
+ {
+ .playback = {
+ .stream_name = "MultiMedia1 Playback",
+ .rates = (SNDRV_PCM_RATE_8000_192000|
+ SNDRV_PCM_RATE_KNOT),
+ .formats = (SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_LE),
+ .channels_min = 1,
+ .channels_max = 8,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ },
+ .name = "MM_DL1",
+ .probe = fe_dai_probe,
+ .id = MSM_FRONTEND_DAI_MULTIMEDIA1,
+ },
+ {
+ .playback = {
+ .stream_name = "MultiMedia2 Playback",
+ .rates = (SNDRV_PCM_RATE_8000_192000|
+ SNDRV_PCM_RATE_KNOT),
+ .formats = (SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_LE),
+ .channels_min = 1,
+ .channels_max = 8,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ },
+ .name = "MM_DL2",
+ .probe = fe_dai_probe,
+ .id = MSM_FRONTEND_DAI_MULTIMEDIA2,
+ },
+};
+
+static int q6asm_dai_probe(struct platform_device *pdev)
+{
+ struct q6asm_dai_data *pdata;
+ struct device *dev = &pdev->dev;
+ int rc;
+
+ pdata = devm_kzalloc(dev, sizeof(struct q6asm_dai_data), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+
+ dev_set_drvdata(dev, pdata);
+
+ rc = snd_soc_register_platform(dev, &q6asm_soc_platform);
+ if (rc) {
+ dev_err(&pdev->dev, "err_dai_platform\n");
+ return rc;
+ }
+
+ rc = snd_soc_register_component(dev, &q6asm_fe_dai_component,
+ q6asm_fe_dais,
+ ARRAY_SIZE(q6asm_fe_dais));
+ if (rc)
+ dev_err(dev, "err_dai_component\n");
+
+ return rc;
+
+}
+
+static int q6asm_dai_remove(struct platform_device *pdev)
+{
+ snd_soc_unregister_platform(&pdev->dev);
+ return 0;
+}
+
+static struct platform_driver q6asm_dai_driver = {
+ .driver = {
+ .name = "q6asm_dai",
+ .owner = THIS_MODULE,
+ },
+ .probe = q6asm_dai_probe,
+ .remove = q6asm_dai_remove,
+};
+
+module_platform_driver(q6asm_dai_driver);
+
+MODULE_DESCRIPTION("PCM module platform driver");
+MODULE_LICENSE("GPL v2");
--
2.15.0
^ permalink raw reply related
* [RESEND PATCH v2 11/15] ASoC: qcom: qdsp6: Add support to q6afe dai driver
From: srinivas.kandagatla at linaro.org @ 2017-12-14 17:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171214173402.19074-1-srinivas.kandagatla@linaro.org>
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch adds support to q6afe backend dais driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
sound/soc/qcom/Kconfig | 5 +
sound/soc/qcom/qdsp6/Makefile | 1 +
sound/soc/qcom/qdsp6/q6afe-dai.c | 241 +++++++++++++++++++++++++++++++++++++++
3 files changed, 247 insertions(+)
create mode 100644 sound/soc/qcom/qdsp6/q6afe-dai.c
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index dd8fb0cde614..003ce182691c 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -64,6 +64,10 @@ config SND_SOC_QDSP6_ROUTING
tristate
default n
+config SND_SOC_QDSP6_AFE_DAI
+ tristate
+ default n
+
config SND_SOC_QDSP6
tristate "SoC ALSA audio driver for QDSP6"
select SND_SOC_QDSP6_AFE
@@ -71,6 +75,7 @@ config SND_SOC_QDSP6
select SND_SOC_QDSP6_ASM
select SND_SOC_QDSP6_CORE
select SND_SOC_QDSP6_ROUTING
+ select SND_SOC_QDSP6_AFE_DAI
help
To add support for MSM QDSP6 Soc Audio.
This will enable sound soc platform specific
diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile
index c1ad060a2341..bd8bd02bf09e 100644
--- a/sound/soc/qcom/qdsp6/Makefile
+++ b/sound/soc/qcom/qdsp6/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_SND_SOC_QDSP6_ADM) += q6adm.o
obj-$(CONFIG_SND_SOC_QDSP6_ASM) += q6asm.o
obj-$(CONFIG_SND_SOC_QDSP6_CORE) += q6core.o
obj-$(CONFIG_SND_SOC_QDSP6_ROUTING) += q6routing.o
+obj-$(CONFIG_SND_SOC_QDSP6_AFE_DAI) += q6afe-dai.o
diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c
new file mode 100644
index 000000000000..e9865c684bcb
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6afe-dai.c
@@ -0,0 +1,241 @@
+/* SPDX-License-Identifier: GPL-2.0
+* Copyright (c) 2011-2016, The Linux Foundation
+* Copyright (c) 2017, Linaro Limited
+*/
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+#include "q6afe.h"
+
+struct q6hdmi_dai_data {
+ struct q6afe_port *port;
+ struct q6afe_hdmi_cfg port_config;
+ bool is_port_started;
+};
+
+static int q6hdmi_format_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct q6hdmi_dai_data *dai_data = kcontrol->private_data;
+ int value = ucontrol->value.integer.value[0];
+
+ dai_data->port_config.datatype = value;
+
+ return 0;
+}
+
+static int q6hdmi_format_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+
+ struct q6hdmi_dai_data *dai_data = kcontrol->private_data;
+
+ ucontrol->value.integer.value[0] =
+ dai_data->port_config.datatype;
+
+ return 0;
+}
+
+static const char * const hdmi_format[] = {
+ "LPCM",
+ "Compr"
+};
+
+static const struct soc_enum hdmi_config_enum[] = {
+ SOC_ENUM_SINGLE_EXT(2, hdmi_format),
+};
+
+static const struct snd_kcontrol_new hdmi_config_controls[] = {
+ SOC_ENUM_EXT("HDMI RX Format", hdmi_config_enum[0],
+ q6hdmi_format_get,
+ q6hdmi_format_put),
+};
+
+static int q6hdmi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct q6hdmi_dai_data *dai_data = dev_get_drvdata(dai->dev);
+ int channels = params_channels(params);
+
+ dai_data->port_config.sample_rate = params_rate(params);
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ dai_data->port_config.bit_width = 16;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ dai_data->port_config.bit_width = 24;
+ break;
+ }
+
+ /*refer to HDMI spec CEA-861-E: Table 28 Audio InfoFrame Data Byte 4*/
+ switch (channels) {
+ case 2:
+ dai_data->port_config.channel_allocation = 0;
+ break;
+ case 3:
+ dai_data->port_config.channel_allocation = 0x02;
+ break;
+ case 4:
+ dai_data->port_config.channel_allocation = 0x06;
+ break;
+ case 5:
+ dai_data->port_config.channel_allocation = 0x0A;
+ break;
+ case 6:
+ dai_data->port_config.channel_allocation = 0x0B;
+ break;
+ case 7:
+ dai_data->port_config.channel_allocation = 0x12;
+ break;
+ case 8:
+ dai_data->port_config.channel_allocation = 0x13;
+ break;
+ default:
+ dev_err(dai->dev, "invalid Channels = %u\n", channels);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int q6hdmi_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct q6hdmi_dai_data *dai_data = dev_get_drvdata(dai->dev);
+
+ dai_data->is_port_started = false;
+
+ return 0;
+}
+
+static void q6hdmi_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct q6hdmi_dai_data *dai_data = dev_get_drvdata(dai->dev);
+ int rc;
+
+ rc = q6afe_port_stop(dai_data->port);
+ if (rc < 0)
+ dev_err(dai->dev, "fail to close AFE port\n");
+
+ dai_data->is_port_started = false;
+
+}
+
+static int q6hdmi_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct q6hdmi_dai_data *dai_data = dev_get_drvdata(dai->dev);
+ int rc;
+
+ if (dai_data->is_port_started) {
+ /* stop the port and restart with new port config */
+ rc = q6afe_port_stop(dai_data->port);
+ if (rc < 0) {
+ dev_err(dai->dev, "fail to close AFE port\n");
+ return rc;
+ }
+ }
+
+ q6afe_hdmi_port_prepare(dai_data->port, &dai_data->port_config);
+ rc = q6afe_port_start(dai_data->port);
+ if (rc < 0) {
+ dev_err(dai->dev, "fail to start AFE port %x\n", dai->id);
+ return rc;
+ }
+ dai_data->is_port_started = true;
+
+ return 0;
+}
+
+static const struct snd_soc_dapm_route hdmi_dapm_routes[] = {
+ {"HDMI Playback", NULL, "HDMI"},
+};
+
+static struct snd_soc_dai_ops q6hdmi_ops = {
+ .prepare = q6hdmi_prepare,
+ .hw_params = q6hdmi_hw_params,
+ .shutdown = q6hdmi_shutdown,
+ .startup = q6hdmi_startup,
+};
+
+static struct snd_soc_dai_driver q6afe_dai_hdmi_rx = {
+ .playback = {
+ .stream_name = "HDMI Playback",
+ .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
+ .channels_min = 2,
+ .channels_max = 8,
+ .rate_max = 192000,
+ .rate_min = 48000,
+ },
+ .ops = &q6hdmi_ops,
+ .id = AFE_PORT_HDMI_RX,
+ .name = "HDMI",
+};
+
+static const struct snd_soc_dapm_widget hdmi_dapm_widgets[] = {
+ SND_SOC_DAPM_AIF_OUT("HDMI", "HDMI Playback", 0, 0, 0, 0),
+ SND_SOC_DAPM_OUTPUT("HDMI-RX"),
+};
+
+static const struct snd_soc_component_driver msm_dai_hdmi_q6_component = {
+ .name = "msm-dai-q6-hdmi",
+ .dapm_widgets = hdmi_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(hdmi_dapm_widgets),
+ .controls = hdmi_config_controls,
+ .num_controls = ARRAY_SIZE(hdmi_config_controls),
+ .dapm_routes = hdmi_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(hdmi_dapm_routes),
+};
+
+static int q6afe_dai_dev_probe(struct platform_device *pdev)
+{
+ struct q6hdmi_dai_data *dai_data;
+ int rc = 0;
+ struct q6afe_port *port;
+
+ dai_data = devm_kzalloc(&pdev->dev, sizeof(*dai_data), GFP_KERNEL);
+ if (!dai_data)
+ rc = -ENOMEM;
+
+ port = q6afe_port_get_from_id(&pdev->dev, AFE_PORT_HDMI_RX);
+ if (IS_ERR(port)) {
+ dev_err(&pdev->dev, "Unable to get afe port\n");
+ return -EPROBE_DEFER;
+ }
+ dai_data->port = port;
+ dev_set_drvdata(&pdev->dev, dai_data);
+
+ return devm_snd_soc_register_component(&pdev->dev,
+ &msm_dai_hdmi_q6_component,
+ &q6afe_dai_hdmi_rx, 1);
+}
+
+static int q6afe_dai_dev_remove(struct platform_device *pdev)
+{
+ struct q6hdmi_dai_data *dai_data = dev_get_drvdata(&pdev->dev);
+
+ q6afe_port_put(dai_data->port);
+
+ return 0;
+}
+
+static struct platform_driver q6afe_dai_driver = {
+ .probe = q6afe_dai_dev_probe,
+ .remove = q6afe_dai_dev_remove,
+ .driver = {
+ .name = "q6afe_dai",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(q6afe_dai_driver);
--
2.15.0
^ permalink raw reply related
* [RESEND PATCH v2 10/15] ASoC: qcom: qdsp6: Add support to q6routing driver
From: srinivas.kandagatla at linaro.org @ 2017-12-14 17:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171214173402.19074-1-srinivas.kandagatla@linaro.org>
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch adds support to q6 routing driver which configures route
between ASM and AFE module using ADM apis.
This driver uses dapm widgets to setup the matrix between AFE ports and
ASM streams.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
sound/soc/qcom/Kconfig | 5 +
sound/soc/qcom/qdsp6/Makefile | 1 +
sound/soc/qcom/qdsp6/q6routing.c | 386 +++++++++++++++++++++++++++++++++++++++
sound/soc/qcom/qdsp6/q6routing.h | 9 +
4 files changed, 401 insertions(+)
create mode 100644 sound/soc/qcom/qdsp6/q6routing.c
create mode 100644 sound/soc/qcom/qdsp6/q6routing.h
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 121b9c957024..dd8fb0cde614 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -60,12 +60,17 @@ config SND_SOC_QDSP6_CORE
tristate
default n
+config SND_SOC_QDSP6_ROUTING
+ tristate
+ default n
+
config SND_SOC_QDSP6
tristate "SoC ALSA audio driver for QDSP6"
select SND_SOC_QDSP6_AFE
select SND_SOC_QDSP6_ADM
select SND_SOC_QDSP6_ASM
select SND_SOC_QDSP6_CORE
+ select SND_SOC_QDSP6_ROUTING
help
To add support for MSM QDSP6 Soc Audio.
This will enable sound soc platform specific
diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile
index ad7f10691e54..c1ad060a2341 100644
--- a/sound/soc/qcom/qdsp6/Makefile
+++ b/sound/soc/qcom/qdsp6/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_SND_SOC_QDSP6_AFE) += q6afe.o
obj-$(CONFIG_SND_SOC_QDSP6_ADM) += q6adm.o
obj-$(CONFIG_SND_SOC_QDSP6_ASM) += q6asm.o
obj-$(CONFIG_SND_SOC_QDSP6_CORE) += q6core.o
+obj-$(CONFIG_SND_SOC_QDSP6_ROUTING) += q6routing.o
diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c
new file mode 100644
index 000000000000..f5f12d61a1ee
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6routing.c
@@ -0,0 +1,386 @@
+/* SPDX-License-Identifier: GPL-2.0
+* Copyright (c) 2011-2016, The Linux Foundation
+* Copyright (c) 2017, Linaro Limited
+*/
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/pcm.h>
+#include <sound/control.h>
+#include <sound/asound.h>
+#include <sound/pcm_params.h>
+#include "q6afe.h"
+#include "q6asm.h"
+#include "q6adm.h"
+#include "q6routing.h"
+
+struct session_data {
+ int state;
+ int port_id;
+ int path_type;
+ int app_type;
+ int acdb_id;
+ int sample_rate;
+ int bits_per_sample;
+ int channels;
+ int format;
+ int perf_mode;
+ int numcopps;
+ int fedai_id;
+ unsigned long copp_map;
+};
+
+struct msm_routing_data {
+ struct session_data sessions[MAX_SESSIONS];
+ struct device *dev;
+ struct mutex lock;
+};
+
+static struct msm_routing_data *routing_data;
+
+/**
+ * q6routing_reg_phy_stream() - Register a new stream for route setup
+ *
+ * @fedai_id: Frontend dai id.
+ * @perf_mode: Performace mode.
+ * @stream_id: ASM stream id to map.
+ * @stream_type: Direction of stream
+ *
+ * Return: Will be an negative on error or a zero on success.
+ */
+int q6routing_reg_phy_stream(int fedai_id, int perf_mode,
+ int stream_id, int stream_type)
+{
+ int j, topology, num_copps = 0;
+ struct route_payload payload;
+ int copp_idx;
+ struct session_data *session;
+
+ if (!routing_data) {
+ pr_err("Routing driver not yet ready\n");
+ return -EINVAL;
+ }
+
+ session = &routing_data->sessions[stream_id - 1];
+ mutex_lock(&routing_data->lock);
+ session->fedai_id = fedai_id;
+ payload.num_copps = 0; /* only RX needs to use payload */
+ topology = NULL_COPP_TOPOLOGY;
+ copp_idx = q6adm_open(routing_data->dev, session->port_id,
+ session->path_type, session->sample_rate,
+ session->channels, topology, perf_mode,
+ session->bits_per_sample, 0, 0);
+ if ((copp_idx < 0) || (copp_idx >= MAX_COPPS_PER_PORT)) {
+ mutex_unlock(&routing_data->lock);
+ return -EINVAL;
+ }
+
+ set_bit(copp_idx, &session->copp_map);
+ for (j = 0; j < MAX_COPPS_PER_PORT; j++) {
+ unsigned long copp = session->copp_map;
+
+ if (test_bit(j, &copp)) {
+ payload.port_id[num_copps] = session->port_id;
+ payload.copp_idx[num_copps] = j;
+ num_copps++;
+ }
+ }
+
+ if (num_copps) {
+ payload.num_copps = num_copps;
+ payload.session_id = stream_id;
+ q6adm_matrix_map(routing_data->dev, session->path_type,
+ payload, perf_mode);
+ }
+ mutex_unlock(&routing_data->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(q6routing_reg_phy_stream);
+
+static struct session_data *routing_get_session(struct msm_routing_data *data,
+ int port_id, int port_type)
+{
+ int i;
+
+ for (i = 0; i < MAX_SESSIONS; i++)
+ if (port_id == data->sessions[i].port_id)
+ return &data->sessions[i];
+
+ return NULL;
+}
+
+static struct session_data *get_session_from_id(struct msm_routing_data *data,
+ int fedai_id)
+{
+ int i;
+
+ for (i = 0; i < MAX_SESSIONS; i++) {
+ if (fedai_id == data->sessions[i].fedai_id)
+ return &data->sessions[i];
+ }
+
+ return NULL;
+}
+/**
+ * q6routing_dereg_phy_stream() - Deregister a stream
+ *
+ * @fedai_id: Frontend dai id.
+ * @stream_type: Direction of stream
+ *
+ * Return: Will be an negative on error or a zero on success.
+ */
+void q6routing_dereg_phy_stream(int fedai_id, int stream_type)
+{
+ struct session_data *session;
+ int idx;
+
+ session = get_session_from_id(routing_data, fedai_id);
+ if (!session)
+ return;
+
+ for_each_set_bit(idx, &session->copp_map, MAX_COPPS_PER_PORT)
+ q6adm_close(routing_data->dev, session->port_id,
+ session->perf_mode, idx);
+
+ session->fedai_id = -1;
+ session->copp_map = 0;
+}
+EXPORT_SYMBOL_GPL(q6routing_dereg_phy_stream);
+
+static int msm_routing_get_audio_mixer(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_context *dapm =
+ snd_soc_dapm_kcontrol_dapm(kcontrol);
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ int session_id = mc->shift;
+ struct snd_soc_platform *platform = snd_soc_dapm_to_platform(dapm);
+ struct msm_routing_data *priv = snd_soc_platform_get_drvdata(platform);
+ struct session_data *session = &priv->sessions[session_id];
+
+ if (session->port_id != -1)
+ ucontrol->value.integer.value[0] = 1;
+ else
+ ucontrol->value.integer.value[0] = 0;
+
+ return 0;
+}
+
+static int msm_routing_put_audio_mixer(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_context *dapm =
+ snd_soc_dapm_kcontrol_dapm(kcontrol);
+ struct snd_soc_platform *platform = snd_soc_dapm_to_platform(dapm);
+ struct msm_routing_data *data = snd_soc_platform_get_drvdata(platform);
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ struct snd_soc_dapm_update *update = NULL;
+ int be_id = mc->reg;
+ int session_id = mc->shift;
+ struct session_data *session = &data->sessions[session_id];
+
+ if (ucontrol->value.integer.value[0]) {
+ session->port_id = be_id;
+ snd_soc_dapm_mixer_update_power(dapm, kcontrol, 1, update);
+ } else {
+ session->port_id = -1;
+ snd_soc_dapm_mixer_update_power(dapm, kcontrol, 0, update);
+ }
+
+ return 1;
+}
+
+static const struct snd_kcontrol_new hdmi_mixer_controls[] = {
+ SOC_SINGLE_EXT("MultiMedia1", AFE_PORT_HDMI_RX,
+ MSM_FRONTEND_DAI_MULTIMEDIA1, 1, 0,
+ msm_routing_get_audio_mixer,
+ msm_routing_put_audio_mixer),
+ SOC_SINGLE_EXT("MultiMedia2", AFE_PORT_HDMI_RX,
+ MSM_FRONTEND_DAI_MULTIMEDIA2, 1, 0,
+ msm_routing_get_audio_mixer,
+ msm_routing_put_audio_mixer),
+ SOC_SINGLE_EXT("MultiMedia3", AFE_PORT_HDMI_RX,
+ MSM_FRONTEND_DAI_MULTIMEDIA3, 1, 0,
+ msm_routing_get_audio_mixer,
+ msm_routing_put_audio_mixer),
+ SOC_SINGLE_EXT("MultiMedia4", AFE_PORT_HDMI_RX,
+ MSM_FRONTEND_DAI_MULTIMEDIA4, 1, 0,
+ msm_routing_get_audio_mixer,
+ msm_routing_put_audio_mixer),
+ SOC_SINGLE_EXT("MultiMedia5", AFE_PORT_HDMI_RX,
+ MSM_FRONTEND_DAI_MULTIMEDIA5, 1, 0,
+ msm_routing_get_audio_mixer,
+ msm_routing_put_audio_mixer),
+ SOC_SINGLE_EXT("MultiMedia6", AFE_PORT_HDMI_RX,
+ MSM_FRONTEND_DAI_MULTIMEDIA6, 1, 0,
+ msm_routing_get_audio_mixer,
+ msm_routing_put_audio_mixer),
+ SOC_SINGLE_EXT("MultiMedia7", AFE_PORT_HDMI_RX,
+ MSM_FRONTEND_DAI_MULTIMEDIA7, 1, 0,
+ msm_routing_get_audio_mixer,
+ msm_routing_put_audio_mixer),
+ SOC_SINGLE_EXT("MultiMedia8", AFE_PORT_HDMI_RX,
+ MSM_FRONTEND_DAI_MULTIMEDIA8, 1, 0,
+ msm_routing_get_audio_mixer,
+ msm_routing_put_audio_mixer),
+};
+
+static const struct snd_soc_dapm_widget msm_qdsp6_widgets[] = {
+ /* Frontend AIF */
+ /* Widget name equals to Front-End DAI name<Need confirmation>,
+ * Stream name must contains substring of front-end dai name
+ */
+ SND_SOC_DAPM_AIF_IN("MM_DL1", "MultiMedia1 Playback", 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("MM_DL2", "MultiMedia2 Playback", 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("MM_DL3", "MultiMedia3 Playback", 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("MM_DL4", "MultiMedia4 Playback", 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("MM_DL5", "MultiMedia5 Playback", 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("MM_DL6", "MultiMedia6 Playback", 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("MM_DL7", "MultiMedia7 Playback", 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("MM_DL8", "MultiMedia8 Playback", 0, 0, 0, 0),
+
+ /* Mixer definitions */
+ SND_SOC_DAPM_MIXER("HDMI Mixer", SND_SOC_NOPM, 0, 0,
+ hdmi_mixer_controls,
+ ARRAY_SIZE(hdmi_mixer_controls)),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+ {"HDMI Mixer", "MultiMedia1", "MM_DL1"},
+ {"HDMI Mixer", "MultiMedia2", "MM_DL2"},
+ {"HDMI Mixer", "MultiMedia3", "MM_DL3"},
+ {"HDMI Mixer", "MultiMedia4", "MM_DL4"},
+ {"HDMI Mixer", "MultiMedia5", "MM_DL5"},
+ {"HDMI Mixer", "MultiMedia6", "MM_DL6"},
+ {"HDMI Mixer", "MultiMedia7", "MM_DL7"},
+ {"HDMI Mixer", "MultiMedia8", "MM_DL8"},
+ {"HDMI", NULL, "HDMI Mixer"},
+ {"HDMI-RX", NULL, "HDMI"},
+};
+
+static int routing_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ unsigned int be_id = rtd->cpu_dai->id;
+ struct snd_soc_platform *platform = rtd->platform;
+ struct msm_routing_data *data = snd_soc_platform_get_drvdata(platform);
+ struct session_data *session;
+ int port_id, port_type, path_type, bits_per_sample;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ path_type = ADM_PATH_PLAYBACK;
+ port_type = MSM_AFE_PORT_TYPE_RX;
+ }
+
+ port_id = be_id;
+
+ session = routing_get_session(data, port_id, port_type);
+
+ if (!session) {
+ pr_err("No session matrix setup yet..\n");
+ return -EINVAL;
+ }
+
+ mutex_lock(&data->lock);
+
+ session->path_type = path_type;
+ session->sample_rate = params_rate(params);
+ session->channels = params_channels(params);
+ session->format = params_format(params);
+
+ if (session->format == SNDRV_PCM_FORMAT_S16_LE)
+ session->bits_per_sample = 16;
+ else if (session->format == SNDRV_PCM_FORMAT_S24_LE)
+ bits_per_sample = 24;
+
+ mutex_unlock(&data->lock);
+ return 0;
+}
+
+static int routing_close(struct snd_pcm_substream *substream)
+{
+ return 0;
+}
+
+static int routing_prepare(struct snd_pcm_substream *substream)
+{
+ return 0;
+}
+
+static struct snd_pcm_ops q6pcm_routing_ops = {
+ .hw_params = routing_hw_params,
+ .close = routing_close,
+ .prepare = routing_prepare,
+};
+
+/* Not used but frame seems to require it */
+static int msm_routing_probe(struct snd_soc_platform *platform)
+{
+ int i;
+
+ for (i = 0; i < MAX_SESSIONS; i++)
+ routing_data->sessions[i].port_id = -1;
+
+ snd_soc_platform_set_drvdata(platform, routing_data);
+
+ return 0;
+}
+
+static struct snd_soc_platform_driver msm_soc_routing_platform = {
+ .ops = &q6pcm_routing_ops,
+ .probe = msm_routing_probe,
+ .component_driver = {
+ .dapm_widgets = msm_qdsp6_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(msm_qdsp6_widgets),
+ .dapm_routes = intercon,
+ .num_dapm_routes = ARRAY_SIZE(intercon),
+ },
+};
+
+static int q6pcm_routing_probe(struct platform_device *pdev)
+{
+
+ routing_data = devm_kzalloc(&pdev->dev,
+ sizeof(*routing_data), GFP_KERNEL);
+ if (!routing_data)
+ return -ENOMEM;
+
+ routing_data->dev = &pdev->dev;
+
+ mutex_init(&routing_data->lock);
+ dev_set_drvdata(&pdev->dev, routing_data);
+
+ return devm_snd_soc_register_platform(&pdev->dev,
+ &msm_soc_routing_platform);
+}
+
+static int q6pcm_routing_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver q6pcm_routing_driver = {
+ .driver = {
+ .name = "q6routing",
+ .owner = THIS_MODULE,
+ },
+ .probe = q6pcm_routing_probe,
+ .remove = q6pcm_routing_remove,
+};
+
+module_platform_driver(q6pcm_routing_driver);
+
+MODULE_DESCRIPTION("Q6 Routing platform");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/qcom/qdsp6/q6routing.h b/sound/soc/qcom/qdsp6/q6routing.h
new file mode 100644
index 000000000000..7f0feb196acc
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6routing.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _Q6_PCM_ROUTING_H
+#define _Q6_PCM_ROUTING_H
+
+int q6routing_reg_phy_stream(int fedai_id, int perf_mode,
+ int stream_id, int stream_type);
+void q6routing_dereg_phy_stream(int fedai_id, int stream_type);
+
+#endif /*_Q6_PCM_ROUTING_H */
--
2.15.0
^ permalink raw reply related
* [RESEND PATCH v2 09/15] ASoC: qcom: qdsp6: Add support to Q6CORE
From: srinivas.kandagatla at linaro.org @ 2017-12-14 17:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171214173402.19074-1-srinivas.kandagatla@linaro.org>
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch adds support to core apr service, which is used to query
status of other static and dynamic services on the dsp.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
sound/soc/qcom/Kconfig | 5 +
sound/soc/qcom/qdsp6/Makefile | 1 +
sound/soc/qcom/qdsp6/q6core.c | 227 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 233 insertions(+)
create mode 100644 sound/soc/qcom/qdsp6/q6core.c
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 7ebdb879a8a3..121b9c957024 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -56,11 +56,16 @@ config SND_SOC_QDSP6_ASM
tristate
default n
+config SND_SOC_QDSP6_CORE
+ tristate
+ default n
+
config SND_SOC_QDSP6
tristate "SoC ALSA audio driver for QDSP6"
select SND_SOC_QDSP6_AFE
select SND_SOC_QDSP6_ADM
select SND_SOC_QDSP6_ASM
+ select SND_SOC_QDSP6_CORE
help
To add support for MSM QDSP6 Soc Audio.
This will enable sound soc platform specific
diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile
index 49dd3ccab27b..ad7f10691e54 100644
--- a/sound/soc/qcom/qdsp6/Makefile
+++ b/sound/soc/qcom/qdsp6/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_SND_SOC_QDSP6_AFE) += q6afe.o
obj-$(CONFIG_SND_SOC_QDSP6_ADM) += q6adm.o
obj-$(CONFIG_SND_SOC_QDSP6_ASM) += q6asm.o
+obj-$(CONFIG_SND_SOC_QDSP6_CORE) += q6core.o
diff --git a/sound/soc/qcom/qdsp6/q6core.c b/sound/soc/qcom/qdsp6/q6core.c
new file mode 100644
index 000000000000..d4e2dbc62489
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6core.c
@@ -0,0 +1,227 @@
+/* SPDX-License-Identifier: GPL-2.0
+* Copyright (c) 2017, Linaro Limited
+*/
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/jiffies.h>
+#include <linux/wait.h>
+#include <linux/soc/qcom/apr.h>
+#include <linux/platform_device.h>
+#include <sound/asound.h>
+#include "common.h"
+
+#define ADSP_STATE_READY_TIMEOUT_MS 3000
+#define Q6_READY_TIMEOUT_MS 100
+#define AVCS_CMD_ADSP_EVENT_GET_STATE 0x0001290C
+#define AVCS_CMDRSP_ADSP_EVENT_GET_STATE 0x0001290D
+#define AVCS_GET_VERSIONS 0x00012905
+#define AVCS_GET_VERSIONS_RSP 0x00012906
+
+struct avcs_svc_info {
+ uint32_t service_id;
+ uint32_t version;
+} __packed;
+
+struct q6core {
+ struct apr_device *adev;
+ wait_queue_head_t wait;
+ uint32_t avcs_state;
+ int resp_received;
+ uint32_t num_services;
+ struct avcs_svc_info *svcs_info;
+};
+
+static struct apr_device_id static_services[] = {
+ ADSP_AUDIO_APR_DEV("AFE", APR_SVC_AFE),
+ ADSP_AUDIO_APR_DEV("ASM", APR_SVC_ASM),
+ ADSP_AUDIO_APR_DEV("ADM", APR_SVC_ADM),
+ ADSP_AUDIO_APR_DEV("TEST", APR_SVC_TEST_CLIENT),
+ ADSP_AUDIO_APR_DEV("MVM", APR_SVC_ADSP_MVM),
+ ADSP_AUDIO_APR_DEV("CVS", APR_SVC_ADSP_CVS),
+ ADSP_AUDIO_APR_DEV("CVP", APR_SVC_ADSP_CVP),
+ ADSP_AUDIO_APR_DEV("USM", APR_SVC_USM),
+ ADSP_AUDIO_APR_DEV("VIDC", APR_SVC_VIDC),
+ ADSP_AUDIO_APR_DEV("LSM", APR_SVC_LSM),
+};
+
+static int core_callback(struct apr_device *adev, struct apr_client_data *data)
+{
+ struct q6core *core = dev_get_drvdata(&adev->dev);
+ uint32_t *payload;
+
+ switch (data->opcode) {
+ case AVCS_GET_VERSIONS_RSP:
+ payload = data->payload;
+ core->num_services = payload[1];
+
+ if (!core->svcs_info)
+ core->svcs_info = kcalloc(core->num_services,
+ sizeof(*core->svcs_info),
+ GFP_ATOMIC);
+ if (!core->svcs_info)
+ return -ENOMEM;
+
+ /* svc info is after 8 bytes */
+ memcpy(core->svcs_info, payload + 2,
+ core->num_services * sizeof(*core->svcs_info));
+
+ core->resp_received = 1;
+ wake_up(&core->wait);
+
+ break;
+ case AVCS_CMDRSP_ADSP_EVENT_GET_STATE:
+ payload = data->payload;
+ core->avcs_state = payload[0];
+
+ core->resp_received = 1;
+ wake_up(&core->wait);
+ break;
+ default:
+ dev_err(&adev->dev, "Message id from adsp core svc: 0x%x\n",
+ data->opcode);
+ break;
+ }
+
+ return 0;
+}
+
+void q6core_add_service(struct device *dev, uint32_t svc_id, uint32_t version)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(static_services); i++) {
+ if (static_services[i].svc_id == svc_id) {
+ static_services[i].svc_version = version;
+ apr_add_device(dev->parent, &static_services[i]);
+ dev_info(dev,
+ "Adding SVC: %s: id 0x%x API Ver 0x%x:0x%x\n",
+ static_services[i].name, svc_id,
+ APR_SVC_MAJOR_VERSION(version),
+ APR_SVC_MINOR_VERSION(version));
+ }
+ }
+}
+
+static void q6core_add_static_services(struct q6core *core)
+{
+ int i;
+ struct apr_device *adev = core->adev;
+ struct avcs_svc_info *svcs_info = core->svcs_info;
+
+ for (i = 0; i < core->num_services; i++)
+ q6core_add_service(&adev->dev, svcs_info[i].service_id,
+ svcs_info[i].version);
+}
+
+static int q6core_get_svc_versions(struct q6core *core)
+{
+ struct apr_device *adev = core->adev;
+ struct apr_hdr hdr = {0};
+ int rc;
+
+ hdr.hdr_field = APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD,
+ APR_HDR_LEN(APR_HDR_SIZE), APR_PKT_VER);
+ hdr.pkt_size = APR_PKT_SIZE(APR_HDR_SIZE, 0);
+ hdr.opcode = AVCS_GET_VERSIONS;
+
+ rc = apr_send_pkt(adev, (uint32_t *)&hdr);
+ if (rc < 0)
+ return rc;
+
+ rc = wait_event_timeout(core->wait, (core->resp_received == 1),
+ msecs_to_jiffies(Q6_READY_TIMEOUT_MS));
+ if (rc > 0 && core->resp_received) {
+ core->resp_received = 0;
+ return 0;
+ }
+
+ return rc;
+}
+
+static bool q6core_is_adsp_ready(struct q6core *core)
+{
+ struct apr_device *adev = core->adev;
+ struct apr_hdr hdr = {0};
+ int rc;
+
+ hdr.hdr_field = APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD,
+ APR_HDR_LEN(APR_HDR_SIZE), APR_PKT_VER);
+ hdr.pkt_size = APR_PKT_SIZE(APR_HDR_SIZE, 0);
+ hdr.opcode = AVCS_CMD_ADSP_EVENT_GET_STATE;
+
+ rc = apr_send_pkt(adev, (uint32_t *)&hdr);
+ if (rc < 0)
+ return false;
+
+ rc = wait_event_timeout(core->wait, (core->resp_received == 1),
+ msecs_to_jiffies(Q6_READY_TIMEOUT_MS));
+ if (rc > 0 && core->resp_received) {
+ core->resp_received = 0;
+ if (core->avcs_state == 0x1)
+ return true;
+ }
+
+ return false;
+}
+
+static int q6core_probe(struct apr_device *adev)
+{
+ struct q6core *core;
+ unsigned long timeout = jiffies +
+ msecs_to_jiffies(ADSP_STATE_READY_TIMEOUT_MS);
+ int ret = 0;
+
+ core = devm_kzalloc(&adev->dev, sizeof(*core), GFP_KERNEL);
+ if (!core)
+ return -ENOMEM;
+
+ dev_set_drvdata(&adev->dev, core);
+
+ core->adev = adev;
+ init_waitqueue_head(&core->wait);
+
+ do {
+ if (!q6core_is_adsp_ready(core)) {
+ dev_info(&adev->dev, "ADSP Audio isn't ready\n");
+ } else {
+ dev_info(&adev->dev, "ADSP Audio is ready\n");
+
+ ret = q6core_get_svc_versions(core);
+ if (!ret)
+ q6core_add_static_services(core);
+
+ break;
+ }
+ } while (time_after(timeout, jiffies));
+
+ return ret;
+}
+
+static int q6core_exit(struct apr_device *adev)
+{
+ return 0;
+}
+
+static const struct apr_device_id core_id[] = {
+ {"Q6CORE", APR_DOMAIN_ADSP, APR_SVC_ADSP_CORE, APR_CLIENT_AUDIO},
+ { },
+};
+
+static struct apr_driver qcom_q6core_driver = {
+ .probe = q6core_probe,
+ .remove = q6core_exit,
+ .callback = core_callback,
+ .id_table = core_id,
+ .driver = {
+ .name = "qcom-q6core",
+ },
+};
+
+module_apr_driver(qcom_q6core_driver);
+
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org");
+MODULE_DESCRIPTION("q6 core");
+MODULE_LICENSE("GPL v2");
--
2.15.0
^ permalink raw reply related
* [RESEND PATCH v2 08/15] ASoC: qcom: q6asm: add support to audio stream apis
From: srinivas.kandagatla at linaro.org @ 2017-12-14 17:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171214173402.19074-1-srinivas.kandagatla@linaro.org>
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch adds support to open, write and media format commands
in the q6asm module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
sound/soc/qcom/qdsp6/q6asm.c | 530 ++++++++++++++++++++++++++++++++++++++++++-
sound/soc/qcom/qdsp6/q6asm.h | 42 ++++
2 files changed, 571 insertions(+), 1 deletion(-)
diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c
index 4be92441f524..dabd6509ef99 100644
--- a/sound/soc/qcom/qdsp6/q6asm.c
+++ b/sound/soc/qcom/qdsp6/q6asm.c
@@ -8,16 +8,34 @@
#include <linux/soc/qcom/apr.h>
#include <linux/device.h>
#include <linux/platform_device.h>
+#include <uapi/sound/asound.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include "q6asm.h"
#include "common.h"
+#define ASM_STREAM_CMD_CLOSE 0x00010BCD
+#define ASM_STREAM_CMD_FLUSH 0x00010BCE
+#define ASM_SESSION_CMD_PAUSE 0x00010BD3
+#define ASM_DATA_CMD_EOS 0x00010BDB
+#define DEFAULT_POPP_TOPOLOGY 0x00010BE4
+#define ASM_STREAM_CMD_FLUSH_READBUFS 0x00010C09
#define ASM_CMD_SHARED_MEM_MAP_REGIONS 0x00010D92
#define ASM_CMDRSP_SHARED_MEM_MAP_REGIONS 0x00010D93
#define ASM_CMD_SHARED_MEM_UNMAP_REGIONS 0x00010D94
-
+#define ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2 0x00010D98
+#define ASM_DATA_EVENT_WRITE_DONE_V2 0x00010D99
+#define ASM_SESSION_CMD_RUN_V2 0x00010DAA
+#define ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V2 0x00010DA5
+#define ASM_DATA_CMD_WRITE_V2 0x00010DAB
+#define ASM_SESSION_CMD_SUSPEND 0x00010DEC
+#define ASM_STREAM_CMD_OPEN_WRITE_V3 0x00010DB3
+
+#define ASM_LEGACY_STREAM_SESSION 0
+#define ASM_END_POINT_DEVICE_MATRIX 0
+#define DEFAULT_APP_TYPE 0
+#define TUN_WRITE_IO_MODE 0x0008 /* tunnel read write mode */
#define TUN_READ_IO_MODE 0x0004 /* tunnel read write mode */
#define SYNC_IO_MODE 0x0001
#define ASYNC_IO_MODE 0x0002
@@ -42,6 +60,49 @@ struct avs_cmd_shared_mem_unmap_regions {
u32 mem_map_handle;
} __packed;
+struct asm_data_cmd_media_fmt_update_v2 {
+ u32 fmt_blk_size;
+} __packed;
+
+struct asm_multi_channel_pcm_fmt_blk_v2 {
+ struct apr_hdr hdr;
+ struct asm_data_cmd_media_fmt_update_v2 fmt_blk;
+ u16 num_channels;
+ u16 bits_per_sample;
+ u32 sample_rate;
+ u16 is_signed;
+ u16 reserved;
+ u8 channel_mapping[8];
+} __packed;
+
+struct asm_data_cmd_write_v2 {
+ struct apr_hdr hdr;
+ u32 buf_addr_lsw;
+ u32 buf_addr_msw;
+ u32 mem_map_handle;
+ u32 buf_size;
+ u32 seq_id;
+ u32 timestamp_lsw;
+ u32 timestamp_msw;
+ u32 flags;
+} __packed;
+
+struct asm_stream_cmd_open_write_v3 {
+ struct apr_hdr hdr;
+ uint32_t mode_flags;
+ uint16_t sink_endpointype;
+ uint16_t bits_per_sample;
+ uint32_t postprocopo_id;
+ uint32_t dec_fmt_id;
+} __packed;
+
+struct asm_session_cmd_run_v2 {
+ struct apr_hdr hdr;
+ u32 flags;
+ u32 time_lsw;
+ u32 time_msw;
+} __packed;
+
struct audio_buffer {
dma_addr_t phys;
uint32_t used;
@@ -408,6 +469,111 @@ static struct audio_client *q6asm_get_audio_client(struct q6asm *a,
return NULL;
}
+static int32_t q6asm_callback(struct apr_device *adev,
+ struct apr_client_data *data, int session_id)
+{
+ struct audio_client *ac;// = (struct audio_client *)priv;
+ uint32_t token;
+ uint32_t *payload;
+ uint32_t wakeup_flag = 1;
+ uint32_t client_event = 0;
+ struct q6asm *q6asm = dev_get_drvdata(&adev->dev);
+
+ if (data == NULL)
+ return -EINVAL;
+
+ ac = q6asm_get_audio_client(q6asm, session_id);
+ if (!q6asm_is_valid_audio_client(ac))
+ return -EINVAL;
+
+ payload = data->payload;
+
+ if (data->opcode == APR_BASIC_RSP_RESULT) {
+ token = data->token;
+ switch (payload[0]) {
+ case ASM_SESSION_CMD_PAUSE:
+ client_event = ASM_CLIENT_EVENT_CMD_PAUSE_DONE;
+ break;
+ case ASM_SESSION_CMD_SUSPEND:
+ client_event = ASM_CLIENT_EVENT_CMD_SUSPEND_DONE;
+ break;
+ case ASM_DATA_CMD_EOS:
+ client_event = ASM_CLIENT_EVENT_CMD_EOS_DONE;
+ break;
+ break;
+ case ASM_STREAM_CMD_FLUSH:
+ client_event = ASM_CLIENT_EVENT_CMD_FLUSH_DONE;
+ break;
+ case ASM_SESSION_CMD_RUN_V2:
+ client_event = ASM_CLIENT_EVENT_CMD_RUN_DONE;
+ break;
+
+ case ASM_STREAM_CMD_FLUSH_READBUFS:
+ if (token != ac->session) {
+ dev_err(ac->dev, "session invalid\n");
+ return -EINVAL;
+ }
+ case ASM_STREAM_CMD_CLOSE:
+ client_event = ASM_CLIENT_EVENT_CMD_CLOSE_DONE;
+ break;
+ case ASM_STREAM_CMD_OPEN_WRITE_V3:
+ case ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2:
+ if (payload[1] != 0) {
+ dev_err(ac->dev,
+ "cmd = 0x%x returned error = 0x%x\n",
+ payload[0], payload[1]);
+ if (wakeup_flag) {
+ ac->cmd_state = payload[1];
+ wake_up(&ac->cmd_wait);
+ }
+ return 0;
+ }
+ break;
+ default:
+ dev_err(ac->dev, "command[0x%x] not expecting rsp\n",
+ payload[0]);
+ break;
+ }
+
+ if (ac->cmd_state && wakeup_flag) {
+ ac->cmd_state = 0;
+ wake_up(&ac->cmd_wait);
+ }
+ if (ac->cb)
+ ac->cb(client_event, data->token,
+ data->payload, ac->priv);
+
+ return 0;
+ }
+
+ switch (data->opcode) {
+ case ASM_DATA_EVENT_WRITE_DONE_V2:{
+ struct audio_port_data *port =
+ &ac->port[SNDRV_PCM_STREAM_PLAYBACK];
+
+ client_event = ASM_CLIENT_EVENT_DATA_WRITE_DONE;
+
+ if (ac->io_mode & SYNC_IO_MODE) {
+ dma_addr_t phys = port->buf[data->token].phys;
+
+ if (lower_32_bits(phys) != payload[0] ||
+ upper_32_bits(phys) != payload[1]) {
+ dev_err(ac->dev, "Expected addr %pa\n",
+ &port->buf[data->token].phys);
+ return -EINVAL;
+ }
+ token = data->token;
+ port->buf[token].used = 1;
+ }
+ break;
+ }
+ }
+ if (ac->cb)
+ ac->cb(client_event, data->token, data->payload, ac->priv);
+
+ return 0;
+}
+
static int q6asm_srvc_callback(struct apr_device *adev, struct apr_client_data *data)
{
struct q6asm *a, *q6asm = dev_get_drvdata(&adev->dev);
@@ -415,12 +581,16 @@ static int q6asm_srvc_callback(struct apr_device *adev, struct apr_client_data *
struct audio_port_data *port;
uint32_t dir = 0;
uint32_t sid = 0;
+ int dest_port;
uint32_t *payload;
if (!data) {
dev_err(&adev->dev, "%s: Invalid CB\n", __func__);
return 0;
}
+ dest_port = (data->dest_port >> 8) & 0xFF;
+ if (dest_port)
+ return q6asm_callback(adev, data, dest_port);
payload = data->payload;
sid = (data->token >> 8) & 0x0F;
@@ -540,6 +710,364 @@ struct audio_client *q6asm_audio_client_alloc(struct device *dev,
}
EXPORT_SYMBOL_GPL(q6asm_audio_client_alloc);
+static int __q6asm_open_write(struct audio_client *ac, uint32_t format,
+ uint16_t bits_per_sample, uint32_t stream_id,
+ bool is_gapless_mode)
+{
+ struct asm_stream_cmd_open_write_v3 open;
+ int rc;
+
+ q6asm_add_hdr(ac, &open.hdr, sizeof(open), true, stream_id);
+ ac->cmd_state = -1;
+
+ open.hdr.opcode = ASM_STREAM_CMD_OPEN_WRITE_V3;
+ open.mode_flags = 0x00;
+ open.mode_flags |= ASM_LEGACY_STREAM_SESSION;
+ if (is_gapless_mode)
+ open.mode_flags |= 1 << ASM_SHIFT_GAPLESS_MODE_FLAG;
+
+ /* source endpoint : matrix */
+ open.sink_endpointype = ASM_END_POINT_DEVICE_MATRIX;
+ open.bits_per_sample = bits_per_sample;
+ open.postprocopo_id = DEFAULT_POPP_TOPOLOGY;
+
+ switch (format) {
+ case FORMAT_LINEAR_PCM:
+ open.dec_fmt_id = ASM_MEDIA_FMT_MULTI_CHANNEL_PCM_V2;
+ break;
+ default:
+ dev_err(ac->dev, "Invalid format 0x%x\n", format);
+ return -EINVAL;
+ }
+ rc = apr_send_pkt(ac->adev, (uint32_t *) &open);
+ if (rc < 0)
+ return rc;
+
+ rc = wait_event_timeout(ac->cmd_wait, (ac->cmd_state >= 0), 5 * HZ);
+ if (!rc) {
+ dev_err(ac->dev, "timeout on open write\n");
+ return -ETIMEDOUT;
+ }
+
+ if (ac->cmd_state > 0)
+ return adsp_err_get_lnx_err_code(ac->cmd_state);
+
+ ac->io_mode |= TUN_WRITE_IO_MODE;
+
+ return 0;
+}
+
+/**
+ * q6asm_open_write() - Open audio client for writing
+ *
+ * @ac: audio client pointer
+ * @format: audio sample format
+ * @bits_per_sample: bits per sample
+ *
+ * Return: Will be an negative value on error or zero on success
+ */
+int q6asm_open_write(struct audio_client *ac, uint32_t format,
+ uint16_t bits_per_sample)
+{
+ return __q6asm_open_write(ac, format, bits_per_sample,
+ ac->stream_id, false);
+}
+EXPORT_SYMBOL_GPL(q6asm_open_write);
+
+static int __q6asm_run(struct audio_client *ac, uint32_t flags,
+ uint32_t msw_ts, uint32_t lsw_ts, bool wait)
+{
+ struct asm_session_cmd_run_v2 run;
+ int rc;
+
+ q6asm_add_hdr(ac, &run.hdr, sizeof(run), true, ac->stream_id);
+ ac->cmd_state = -1;
+
+ run.hdr.opcode = ASM_SESSION_CMD_RUN_V2;
+ run.flags = flags;
+ run.time_lsw = lsw_ts;
+ run.time_msw = msw_ts;
+
+ rc = apr_send_pkt(ac->adev, (uint32_t *) &run);
+ if (rc < 0)
+ return rc;
+
+ if (wait) {
+ rc = wait_event_timeout(ac->cmd_wait, (ac->cmd_state >= 0),
+ 5 * HZ);
+ if (!rc) {
+ dev_err(ac->dev, "timeout on run cmd\n");
+ return -ETIMEDOUT;
+ }
+ if (ac->cmd_state > 0)
+ return adsp_err_get_lnx_err_code(ac->cmd_state);
+ }
+
+ return 0;
+}
+
+/**
+ * q6asm_run() - start the audio client
+ *
+ * @ac: audio client pointer
+ * @flags: flags associated with write
+ * @msw_ts: timestamp msw
+ * @lsw_ts: timestamp lsw
+ *
+ * Return: Will be an negative value on error or zero on success
+ */
+int q6asm_run(struct audio_client *ac, uint32_t flags,
+ uint32_t msw_ts, uint32_t lsw_ts)
+{
+ return __q6asm_run(ac, flags, msw_ts, lsw_ts, true);
+}
+EXPORT_SYMBOL_GPL(q6asm_run);
+
+/**
+ * q6asm_run_nowait() - start the audio client withou blocking
+ *
+ * @ac: audio client pointer
+ * @flags: flags associated with write
+ * @msw_ts: timestamp msw
+ * @lsw_ts: timestamp lsw
+ *
+ * Return: Will be an negative value on error or zero on success
+ */
+int q6asm_run_nowait(struct audio_client *ac, uint32_t flags,
+ uint32_t msw_ts, uint32_t lsw_ts)
+{
+ return __q6asm_run(ac, flags, msw_ts, lsw_ts, false);
+}
+EXPORT_SYMBOL_GPL(q6asm_run_nowait);
+
+/**
+ * q6asm_media_format_block_multi_ch_pcm() - setup pcm configuration
+ *
+ * @ac: audio client pointer
+ * @rate: audio sample rate
+ * @channels: number of audio channels.
+ * @use_default_chmap: flag to use default ch map.
+ * @channel_map: channel map pointer
+ * @bits_per_sample: bits per sample
+ *
+ * Return: Will be an negative value on error or zero on success
+ */
+int q6asm_media_format_block_multi_ch_pcm(struct audio_client *ac,
+ uint32_t rate, uint32_t channels,
+ bool use_default_chmap,
+ char *channel_map,
+ uint16_t bits_per_sample)
+{
+ struct asm_multi_channel_pcm_fmt_blk_v2 fmt;
+ u8 *channel_mapping;
+ int rc = 0;
+
+ q6asm_add_hdr(ac, &fmt.hdr, sizeof(fmt), true, ac->stream_id);
+ ac->cmd_state = -1;
+
+ fmt.hdr.opcode = ASM_DATA_CMD_MEDIA_FMT_UPDATE_V2;
+ fmt.fmt_blk.fmt_blk_size = sizeof(fmt) - sizeof(fmt.hdr) -
+ sizeof(fmt.fmt_blk);
+ fmt.num_channels = channels;
+ fmt.bits_per_sample = bits_per_sample;
+ fmt.sample_rate = rate;
+ fmt.is_signed = 1;
+
+ channel_mapping = fmt.channel_mapping;
+
+ if (use_default_chmap) {
+ if (q6dsp_map_channels(channel_mapping, channels)) {
+ dev_err(ac->dev, " map channels failed %d\n", channels);
+ return -EINVAL;
+ }
+ } else {
+ memcpy(channel_mapping, channel_map,
+ PCM_FORMAT_MAX_NUM_CHANNEL);
+ }
+
+ rc = apr_send_pkt(ac->adev, (uint32_t *) &fmt);
+ if (rc < 0)
+ goto fail_cmd;
+
+ rc = wait_event_timeout(ac->cmd_wait, (ac->cmd_state >= 0), 5 * HZ);
+ if (!rc) {
+ dev_err(ac->dev, "timeout on format update\n");
+ return -ETIMEDOUT;
+ }
+ if (ac->cmd_state > 0)
+ return adsp_err_get_lnx_err_code(ac->cmd_state);
+
+ return 0;
+fail_cmd:
+ return rc;
+}
+EXPORT_SYMBOL_GPL(q6asm_media_format_block_multi_ch_pcm);
+
+/**
+ * q6asm_write_nolock() - non blocking write
+ *
+ * @ac: audio client pointer
+ * @len: lenght in bytes
+ * @msw_ts: timestamp msw
+ * @lsw_ts: timestamp lsw
+ * @flags: flags associated with write
+ *
+ * Return: Will be an negative value on error or zero on success
+ */
+int q6asm_write_nolock(struct audio_client *ac, uint32_t len, uint32_t msw_ts,
+ uint32_t lsw_ts, uint32_t flags)
+{
+ struct asm_data_cmd_write_v2 write;
+ struct audio_port_data *port;
+ struct audio_buffer *ab;
+ int dsp_buf = 0;
+ int rc = 0;
+
+ if (ac->io_mode & SYNC_IO_MODE) {
+ port = &ac->port[SNDRV_PCM_STREAM_PLAYBACK];
+ q6asm_add_hdr(ac, &write.hdr, sizeof(write), false,
+ ac->stream_id);
+
+ dsp_buf = port->dsp_buf;
+ ab = &port->buf[dsp_buf];
+
+ write.hdr.token = port->dsp_buf;
+ write.hdr.opcode = ASM_DATA_CMD_WRITE_V2;
+ write.buf_addr_lsw = lower_32_bits(ab->phys);
+ write.buf_addr_msw = upper_32_bits(ab->phys);
+ write.buf_size = len;
+ write.seq_id = port->dsp_buf;
+ write.timestamp_lsw = lsw_ts;
+ write.timestamp_msw = msw_ts;
+ write.mem_map_handle =
+ ac->port[SNDRV_PCM_STREAM_PLAYBACK].mem_map_handle;
+
+ if (flags == NO_TIMESTAMP)
+ write.flags = (flags & 0x800000FF);
+ else
+ write.flags = (0x80000000 | flags);
+
+ port->dsp_buf++;
+
+ if (port->dsp_buf >= port->max_buf_cnt)
+ port->dsp_buf = 0;
+
+ rc = apr_send_pkt(ac->adev, (uint32_t *) &write);
+ if (rc < 0)
+ return rc;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(q6asm_write_nolock);
+
+static void q6asm_reset_buf_state(struct audio_client *ac)
+{
+ int cnt = 0;
+ int loopcnt = 0;
+ int used;
+ struct audio_port_data *port = NULL;
+
+ if (ac->io_mode & SYNC_IO_MODE) {
+ used = (ac->io_mode & TUN_WRITE_IO_MODE ? 1 : 0);
+ mutex_lock(&ac->cmd_lock);
+ for (loopcnt = 0; loopcnt <= SNDRV_PCM_STREAM_CAPTURE;
+ loopcnt++) {
+ port = &ac->port[loopcnt];
+ cnt = port->max_buf_cnt - 1;
+ port->dsp_buf = 0;
+ while (cnt >= 0) {
+ if (!port->buf)
+ continue;
+ port->buf[cnt].used = used;
+ cnt--;
+ }
+ }
+ mutex_unlock(&ac->cmd_lock);
+ }
+}
+
+static int __q6asm_cmd(struct audio_client *ac, int cmd, bool wait)
+{
+ int stream_id = ac->stream_id;
+ struct apr_hdr hdr;
+ int rc;
+
+ q6asm_add_hdr(ac, &hdr, sizeof(hdr), true, stream_id);
+ ac->cmd_state = -1;
+ switch (cmd) {
+ case CMD_PAUSE:
+ hdr.opcode = ASM_SESSION_CMD_PAUSE;
+ break;
+ case CMD_SUSPEND:
+ hdr.opcode = ASM_SESSION_CMD_SUSPEND;
+ break;
+ case CMD_FLUSH:
+ hdr.opcode = ASM_STREAM_CMD_FLUSH;
+ break;
+ case CMD_OUT_FLUSH:
+ hdr.opcode = ASM_STREAM_CMD_FLUSH_READBUFS;
+ break;
+ case CMD_EOS:
+ hdr.opcode = ASM_DATA_CMD_EOS;
+ ac->cmd_state = 0;
+ break;
+ case CMD_CLOSE:
+ hdr.opcode = ASM_STREAM_CMD_CLOSE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ rc = apr_send_pkt(ac->adev, (uint32_t *) &hdr);
+ if (rc < 0)
+ return rc;
+
+ if (!wait)
+ return 0;
+
+ rc = wait_event_timeout(ac->cmd_wait, (ac->cmd_state >= 0), 5 * HZ);
+ if (!rc) {
+ dev_err(ac->dev, "timeout response for opcode[0x%x]\n",
+ hdr.opcode);
+ return -ETIMEDOUT;
+ }
+ if (ac->cmd_state > 0)
+ return adsp_err_get_lnx_err_code(ac->cmd_state);
+
+ if (cmd == CMD_FLUSH)
+ q6asm_reset_buf_state(ac);
+
+ return 0;
+}
+
+/**
+ * q6asm_cmd() - run cmd on audio client
+ *
+ * @ac: audio client pointer
+ * @cmd: command to run on audio client.
+ *
+ * Return: Will be an negative value on error or zero on success
+ */
+int q6asm_cmd(struct audio_client *ac, int cmd)
+{
+ return __q6asm_cmd(ac, cmd, true);
+}
+EXPORT_SYMBOL_GPL(q6asm_cmd);
+
+/**
+ * q6asm_cmd_nowait() - non blocking, run cmd on audio client
+ *
+ * @ac: audio client pointer
+ * @cmd: command to run on audio client.
+ *
+ * Return: Will be an negative value on error or zero on success
+ */
+int q6asm_cmd_nowait(struct audio_client *ac, int cmd)
+{
+ return __q6asm_cmd(ac, cmd, false);
+}
+EXPORT_SYMBOL_GPL(q6asm_cmd_nowait);
static int q6asm_probe(struct apr_device *adev)
{
diff --git a/sound/soc/qcom/qdsp6/q6asm.h b/sound/soc/qcom/qdsp6/q6asm.h
index e1409c368600..b4896059da79 100644
--- a/sound/soc/qcom/qdsp6/q6asm.h
+++ b/sound/soc/qcom/qdsp6/q6asm.h
@@ -2,7 +2,34 @@
#ifndef __Q6_ASM_H__
#define __Q6_ASM_H__
+/* ASM client callback events */
+#define CMD_PAUSE 0x0001
+#define ASM_CLIENT_EVENT_CMD_PAUSE_DONE 0x1001
+#define CMD_FLUSH 0x0002
+#define ASM_CLIENT_EVENT_CMD_FLUSH_DONE 0x1002
+#define CMD_EOS 0x0003
+#define ASM_CLIENT_EVENT_CMD_EOS_DONE 0x1003
+#define CMD_CLOSE 0x0004
+#define ASM_CLIENT_EVENT_CMD_CLOSE_DONE 0x1004
+#define CMD_OUT_FLUSH 0x0005
+#define ASM_CLIENT_EVENT_CMD_OUT_FLUSH_DONE 0x1005
+#define CMD_SUSPEND 0x0006
+#define ASM_CLIENT_EVENT_CMD_SUSPEND_DONE 0x1006
+#define ASM_CLIENT_EVENT_CMD_RUN_DONE 0x1008
+#define ASM_CLIENT_EVENT_DATA_WRITE_DONE 0x1009
+
+#define MSM_FRONTEND_DAI_MULTIMEDIA1 0
+#define MSM_FRONTEND_DAI_MULTIMEDIA2 1
+#define MSM_FRONTEND_DAI_MULTIMEDIA3 2
+#define MSM_FRONTEND_DAI_MULTIMEDIA4 3
+#define MSM_FRONTEND_DAI_MULTIMEDIA5 4
+#define MSM_FRONTEND_DAI_MULTIMEDIA6 5
+#define MSM_FRONTEND_DAI_MULTIMEDIA7 6
+#define MSM_FRONTEND_DAI_MULTIMEDIA8 7
+
#define MAX_SESSIONS 16
+#define NO_TIMESTAMP 0xFF00
+#define FORMAT_LINEAR_PCM 0x0000
typedef void (*app_cb) (uint32_t opcode, uint32_t token,
uint32_t *payload, void *priv);
@@ -10,6 +37,21 @@ struct audio_client;
struct audio_client *q6asm_audio_client_alloc(struct device *dev,
app_cb cb, void *priv);
void q6asm_audio_client_free(struct audio_client *ac);
+int q6asm_write_nolock(struct audio_client *ac, uint32_t len, uint32_t msw_ts,
+ uint32_t lsw_ts, uint32_t flags);
+int q6asm_open_write(struct audio_client *ac, uint32_t format,
+ uint16_t bits_per_sample);
+int q6asm_media_format_block_multi_ch_pcm(struct audio_client *ac,
+ uint32_t rate, uint32_t channels,
+ bool use_default_chmap,
+ char *channel_map,
+ uint16_t bits_per_sample);
+int q6asm_run(struct audio_client *ac, uint32_t flags, uint32_t msw_ts,
+ uint32_t lsw_ts);
+int q6asm_run_nowait(struct audio_client *ac, uint32_t flags, uint32_t msw_ts,
+ uint32_t lsw_ts);
+int q6asm_cmd(struct audio_client *ac, int cmd);
+int q6asm_cmd_nowait(struct audio_client *ac, int cmd);
int q6asm_get_session_id(struct audio_client *ac);
int q6asm_map_memory_regions(unsigned int dir,
struct audio_client *ac,
--
2.15.0
^ permalink raw reply related
* [RESEND PATCH v2 07/15] ASoC: qcom: q6asm: Add support to memory map and unmap
From: srinivas.kandagatla at linaro.org @ 2017-12-14 17:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171214173402.19074-1-srinivas.kandagatla@linaro.org>
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch adds support to memory map and unmap regions commands in
q6asm module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
sound/soc/qcom/qdsp6/q6asm.c | 343 ++++++++++++++++++++++++++++++++++++++++++-
sound/soc/qcom/qdsp6/q6asm.h | 5 +
2 files changed, 347 insertions(+), 1 deletion(-)
diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c
index 9cc583afef4d..4be92441f524 100644
--- a/sound/soc/qcom/qdsp6/q6asm.c
+++ b/sound/soc/qcom/qdsp6/q6asm.c
@@ -14,9 +14,46 @@
#include "q6asm.h"
#include "common.h"
+#define ASM_CMD_SHARED_MEM_MAP_REGIONS 0x00010D92
+#define ASM_CMDRSP_SHARED_MEM_MAP_REGIONS 0x00010D93
+#define ASM_CMD_SHARED_MEM_UNMAP_REGIONS 0x00010D94
+
#define TUN_READ_IO_MODE 0x0004 /* tunnel read write mode */
#define SYNC_IO_MODE 0x0001
#define ASYNC_IO_MODE 0x0002
+#define ASM_SHIFT_GAPLESS_MODE_FLAG 31
+#define ADSP_MEMORY_MAP_SHMEM8_4K_POOL 3
+
+struct avs_cmd_shared_mem_map_regions {
+ struct apr_hdr hdr;
+ u16 mem_pool_id;
+ u16 num_regions;
+ u32 property_flag;
+} __packed;
+
+struct avs_shared_map_region_payload {
+ u32 shm_addr_lsw;
+ u32 shm_addr_msw;
+ u32 mem_size_bytes;
+} __packed;
+
+struct avs_cmd_shared_mem_unmap_regions {
+ struct apr_hdr hdr;
+ u32 mem_map_handle;
+} __packed;
+
+struct audio_buffer {
+ dma_addr_t phys;
+ uint32_t used;
+ uint32_t size; /* size of buffer */
+};
+
+struct audio_port_data {
+ struct audio_buffer *buf;
+ uint32_t max_buf_cnt;
+ uint32_t dsp_buf;
+ uint32_t mem_map_handle;
+};
struct audio_client {
int session;
@@ -27,6 +64,8 @@ struct audio_client {
uint64_t time_stamp;
struct apr_device *adev;
struct mutex cmd_lock;
+ /* idx:1 out port, 0: in port */
+ struct audio_port_data port[2];
wait_queue_head_t cmd_wait;
int perf_mode;
int stream_id;
@@ -86,6 +125,260 @@ static void q6asm_session_free(struct audio_client *ac)
mutex_unlock(&a->session_lock);
}
+static inline void q6asm_add_mmaphdr(struct audio_client *ac,
+ struct apr_hdr *hdr, u32 pkt_size,
+ bool cmd_flg, u32 token)
+{
+ hdr->hdr_field = APR_SEQ_CMD_HDR_FIELD;
+ hdr->src_port = 0;
+ hdr->dest_port = 0;
+ hdr->pkt_size = pkt_size;
+ if (cmd_flg)
+ hdr->token = token;
+}
+
+static inline void q6asm_add_hdr(struct audio_client *ac, struct apr_hdr *hdr,
+ uint32_t pkt_size, bool cmd_flg,
+ uint32_t stream_id)
+{
+ hdr->hdr_field = APR_SEQ_CMD_HDR_FIELD;
+ hdr->src_svc = ac->adev->svc_id;
+ hdr->src_domain = APR_DOMAIN_APPS;
+ hdr->dest_svc = APR_SVC_ASM;
+ hdr->dest_domain = APR_DOMAIN_ADSP;
+ hdr->src_port = ((ac->session << 8) & 0xFF00) | (stream_id);
+ hdr->dest_port = ((ac->session << 8) & 0xFF00) | (stream_id);
+ hdr->pkt_size = pkt_size;
+ if (cmd_flg)
+ hdr->token = ac->session;
+}
+
+static int __q6asm_memory_unmap(struct audio_client *ac,
+ phys_addr_t buf_add, int dir)
+{
+ struct avs_cmd_shared_mem_unmap_regions mem_unmap;
+ struct q6asm *a = dev_get_drvdata(ac->dev->parent);
+ int rc;
+
+ if (!a)
+ return -ENODEV;
+
+ q6asm_add_mmaphdr(ac, &mem_unmap.hdr, sizeof(mem_unmap), true,
+ ((ac->session << 8) | dir));
+ a->mem_state = -1;
+
+ mem_unmap.hdr.opcode = ASM_CMD_SHARED_MEM_UNMAP_REGIONS;
+ mem_unmap.mem_map_handle = ac->port[dir].mem_map_handle;
+
+ if (mem_unmap.mem_map_handle == 0) {
+ dev_err(ac->dev, "invalid mem handle\n");
+ return -EINVAL;
+ }
+
+ rc = apr_send_pkt(a->adev, (uint32_t *) &mem_unmap);
+ if (rc < 0)
+ return rc;
+
+ rc = wait_event_timeout(a->mem_wait, (a->mem_state >= 0),
+ 5 * HZ);
+ if (!rc) {
+ dev_err(ac->dev, "CMD timeout for memory_unmap 0x%x\n",
+ mem_unmap.mem_map_handle);
+ return -ETIMEDOUT;
+ } else if (a->mem_state > 0) {
+ return adsp_err_get_lnx_err_code(a->mem_state);
+ }
+ ac->port[dir].mem_map_handle = 0;
+
+ return 0;
+}
+
+/**
+ * q6asm_unmap_memory_regions() - unmap memory regions in the dsp.
+ *
+ * @dir: direction of audio stream
+ * @ac: audio client instanace
+ *
+ * Return: Will be an negative value on failure or zero on success
+ */
+int q6asm_unmap_memory_regions(unsigned int dir, struct audio_client *ac)
+{
+ struct audio_port_data *port;
+ int cnt = 0;
+ int rc = 0;
+
+ mutex_lock(&ac->cmd_lock);
+ port = &ac->port[dir];
+ if (!port->buf) {
+ mutex_unlock(&ac->cmd_lock);
+ return 0;
+ }
+ cnt = port->max_buf_cnt - 1;
+ if (cnt >= 0) {
+ rc = __q6asm_memory_unmap(ac, port->buf[dir].phys, dir);
+ if (rc < 0) {
+ dev_err(ac->dev, "%s: Memory_unmap_regions failed %d\n",
+ __func__, rc);
+ mutex_unlock(&ac->cmd_lock);
+ return rc;
+ }
+ }
+
+ port->max_buf_cnt = 0;
+ kfree(port->buf);
+ port->buf = NULL;
+ mutex_unlock(&ac->cmd_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(q6asm_unmap_memory_regions);
+
+static int __q6asm_memory_map_regions(struct audio_client *ac, int dir,
+ uint32_t period_sz, uint32_t periods,
+ bool is_contiguous)
+{
+ struct avs_cmd_shared_mem_map_regions *mmap_regions = NULL;
+ struct avs_shared_map_region_payload *mregions = NULL;
+ struct q6asm *a = dev_get_drvdata(ac->dev->parent);
+ struct audio_port_data *port = NULL;
+ struct audio_buffer *ab = NULL;
+ void *mmap_region_cmd = NULL;
+ void *payload = NULL;
+ int rc = 0;
+ int i = 0;
+ int cmd_size = 0;
+ uint32_t num_regions;
+ uint32_t buf_sz;
+
+ if (!a)
+ return -ENODEV;
+ num_regions = is_contiguous ? 1 : periods;
+ buf_sz = is_contiguous ? (period_sz * periods) : period_sz;
+ buf_sz = PAGE_ALIGN(buf_sz);
+
+ cmd_size = sizeof(*mmap_regions) + (sizeof(*mregions) * num_regions);
+
+ mmap_region_cmd = kzalloc(cmd_size, GFP_KERNEL);
+ if (!mmap_region_cmd)
+ return -ENOMEM;
+
+ mmap_regions = (struct avs_cmd_shared_mem_map_regions *)mmap_region_cmd;
+ q6asm_add_mmaphdr(ac, &mmap_regions->hdr, cmd_size, true,
+ ((ac->session << 8) | dir));
+ a->mem_state = -1;
+
+ mmap_regions->hdr.opcode = ASM_CMD_SHARED_MEM_MAP_REGIONS;
+ mmap_regions->mem_pool_id = ADSP_MEMORY_MAP_SHMEM8_4K_POOL;
+ mmap_regions->num_regions = num_regions;
+ mmap_regions->property_flag = 0x00;
+
+ payload = ((u8 *) mmap_region_cmd +
+ sizeof(struct avs_cmd_shared_mem_map_regions));
+
+ mregions = (struct avs_shared_map_region_payload *)payload;
+
+ ac->port[dir].mem_map_handle = 0;
+ port = &ac->port[dir];
+
+ for (i = 0; i < num_regions; i++) {
+ ab = &port->buf[i];
+ mregions->shm_addr_lsw = lower_32_bits(ab->phys);
+ mregions->shm_addr_msw = upper_32_bits(ab->phys);
+ mregions->mem_size_bytes = buf_sz;
+ ++mregions;
+ }
+
+ rc = apr_send_pkt(a->adev, (uint32_t *) mmap_region_cmd);
+ if (rc < 0)
+ goto fail_cmd;
+
+ rc = wait_event_timeout(a->mem_wait, (a->mem_state >= 0),
+ 5 * HZ);
+ if (!rc) {
+ dev_err(ac->dev, "timeout. waited for memory_map\n");
+ rc = -ETIMEDOUT;
+ goto fail_cmd;
+ }
+
+ if (a->mem_state > 0) {
+ rc = adsp_err_get_lnx_err_code(a->mem_state);
+ goto fail_cmd;
+ }
+ rc = 0;
+fail_cmd:
+ kfree(mmap_region_cmd);
+ return rc;
+}
+
+/**
+ * q6asm_map_memory_regions() - map memory regions in the dsp.
+ *
+ * @dir: direction of audio stream
+ * @ac: audio client instanace
+ * @phys: physcial address that needs mapping.
+ * @period_sz: audio period size
+ * @periods: number of periods
+ *
+ * Return: Will be an negative value on failure or zero on success
+ */
+int q6asm_map_memory_regions(unsigned int dir, struct audio_client *ac,
+ dma_addr_t phys,
+ unsigned int period_sz, unsigned int periods)
+{
+ struct audio_buffer *buf;
+ int cnt;
+ int rc;
+
+ if (ac->port[dir].buf) {
+ dev_err(ac->dev, "Buffer already allocated\n");
+ return 0;
+ }
+
+ mutex_lock(&ac->cmd_lock);
+
+ buf = kzalloc(((sizeof(struct audio_buffer)) * periods), GFP_KERNEL);
+ if (!buf) {
+ mutex_unlock(&ac->cmd_lock);
+ return -ENOMEM;
+ }
+
+
+ ac->port[dir].buf = buf;
+
+ buf[0].phys = phys;
+ buf[0].used = dir ^ 1;
+ buf[0].size = period_sz;
+ cnt = 1;
+ while (cnt < periods) {
+ if (period_sz > 0) {
+ buf[cnt].phys = buf[0].phys + (cnt * period_sz);
+ buf[cnt].used = dir ^ 1;
+ buf[cnt].size = period_sz;
+ }
+ cnt++;
+ }
+
+ ac->port[dir].max_buf_cnt = periods;
+ mutex_unlock(&ac->cmd_lock);
+
+ rc = __q6asm_memory_map_regions(ac, dir, period_sz, periods, 1);
+ if (rc < 0) {
+ dev_err(ac->dev,
+ "CMD Memory_map_regions failed %d for size %d\n", rc,
+ period_sz);
+
+
+ ac->port[dir].max_buf_cnt = 0;
+ kfree(buf);
+ ac->port[dir].buf = NULL;
+
+ return rc;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(q6asm_map_memory_regions);
+
/**
* q6asm_audio_client_free() - Freee allocated audio client
*
@@ -117,8 +410,10 @@ static struct audio_client *q6asm_get_audio_client(struct q6asm *a,
static int q6asm_srvc_callback(struct apr_device *adev, struct apr_client_data *data)
{
- struct q6asm *q6asm = dev_get_drvdata(&adev->dev);
+ struct q6asm *a, *q6asm = dev_get_drvdata(&adev->dev);
struct audio_client *ac = NULL;
+ struct audio_port_data *port;
+ uint32_t dir = 0;
uint32_t sid = 0;
uint32_t *payload;
@@ -135,6 +430,52 @@ static int q6asm_srvc_callback(struct apr_device *adev, struct apr_client_data *
return 0;
}
+ a = dev_get_drvdata(ac->dev->parent);
+ if (data->opcode == APR_BASIC_RSP_RESULT) {
+ switch (payload[0]) {
+ case ASM_CMD_SHARED_MEM_MAP_REGIONS:
+ case ASM_CMD_SHARED_MEM_UNMAP_REGIONS:
+ if (payload[1] != 0) {
+ dev_err(ac->dev,
+ "cmd = 0x%x returned error = 0x%x sid:%d\n",
+ payload[0], payload[1], sid);
+ a->mem_state = payload[1];
+ } else {
+ a->mem_state = 0;
+ }
+
+ wake_up(&a->mem_wait);
+ break;
+ default:
+ dev_err(&adev->dev, "command[0x%x] not expecting rsp\n",
+ payload[0]);
+ break;
+ }
+ return 0;
+ }
+
+ dir = (data->token & 0x0F);
+ port = &ac->port[dir];
+
+ switch (data->opcode) {
+ case ASM_CMDRSP_SHARED_MEM_MAP_REGIONS:{
+ a->mem_state = 0;
+ ac->port[dir].mem_map_handle = payload[0];
+ wake_up(&a->mem_wait);
+ break;
+ }
+ case ASM_CMD_SHARED_MEM_UNMAP_REGIONS:{
+ a->mem_state = 0;
+ ac->port[dir].mem_map_handle = 0;
+ wake_up(&a->mem_wait);
+
+ break;
+ }
+ default:
+ dev_dbg(&adev->dev, "command[0x%x]success [0x%x]\n",
+ payload[0], payload[1]);
+ break;
+ }
if (ac->cb)
ac->cb(data->opcode, data->token, data->payload, ac->priv);
return 0;
diff --git a/sound/soc/qcom/qdsp6/q6asm.h b/sound/soc/qcom/qdsp6/q6asm.h
index 7a8a9039fd89..e1409c368600 100644
--- a/sound/soc/qcom/qdsp6/q6asm.h
+++ b/sound/soc/qcom/qdsp6/q6asm.h
@@ -11,4 +11,9 @@ struct audio_client *q6asm_audio_client_alloc(struct device *dev,
app_cb cb, void *priv);
void q6asm_audio_client_free(struct audio_client *ac);
int q6asm_get_session_id(struct audio_client *ac);
+int q6asm_map_memory_regions(unsigned int dir,
+ struct audio_client *ac,
+ dma_addr_t phys,
+ unsigned int bufsz, unsigned int bufcnt);
+int q6asm_unmap_memory_regions(unsigned int dir, struct audio_client *ac);
#endif /* __Q6_ASM_H__ */
--
2.15.0
^ permalink raw reply related
* [RESEND PATCH v2 06/15] ASoC: qcom: qdsp6: Add support to Q6ASM
From: srinivas.kandagatla at linaro.org @ 2017-12-14 17:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171214173402.19074-1-srinivas.kandagatla@linaro.org>
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch adds basic support to Q6 ASM (Audio Stream Manager) module on
Q6DSP. ASM supports up to 8 concurrent streams. each stream can be setup
as playback/capture. ASM provides top control functions like
Pause/flush/resume for playback and record. ASM can Create/destroy encoder,
decoder and also provides POPP dynamic services.
This patch adds support to basic features to allow hdmi playback.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
sound/soc/qcom/Kconfig | 5 +
sound/soc/qcom/qdsp6/Makefile | 1 +
sound/soc/qcom/qdsp6/q6asm.c | 250 ++++++++++++++++++++++++++++++++++++++++++
sound/soc/qcom/qdsp6/q6asm.h | 14 +++
4 files changed, 270 insertions(+)
create mode 100644 sound/soc/qcom/qdsp6/q6asm.c
create mode 100644 sound/soc/qcom/qdsp6/q6asm.h
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index a307880dc992..7ebdb879a8a3 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -52,10 +52,15 @@ config SND_SOC_QDSP6_ADM
tristate
default n
+config SND_SOC_QDSP6_ASM
+ tristate
+ default n
+
config SND_SOC_QDSP6
tristate "SoC ALSA audio driver for QDSP6"
select SND_SOC_QDSP6_AFE
select SND_SOC_QDSP6_ADM
+ select SND_SOC_QDSP6_ASM
help
To add support for MSM QDSP6 Soc Audio.
This will enable sound soc platform specific
diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile
index 052813ea7062..49dd3ccab27b 100644
--- a/sound/soc/qcom/qdsp6/Makefile
+++ b/sound/soc/qcom/qdsp6/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_SND_SOC_QDSP6_AFE) += q6afe.o
obj-$(CONFIG_SND_SOC_QDSP6_ADM) += q6adm.o
+obj-$(CONFIG_SND_SOC_QDSP6_ASM) += q6asm.o
diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c
new file mode 100644
index 000000000000..9cc583afef4d
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6asm.c
@@ -0,0 +1,250 @@
+/* SPDX-License-Identifier: GPL-2.0
+* Copyright (c) 2011-2016, The Linux Foundation
+* Copyright (c) 2017, Linaro Limited
+*/
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/module.h>
+#include <linux/soc/qcom/apr.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include "q6asm.h"
+#include "common.h"
+
+#define TUN_READ_IO_MODE 0x0004 /* tunnel read write mode */
+#define SYNC_IO_MODE 0x0001
+#define ASYNC_IO_MODE 0x0002
+
+struct audio_client {
+ int session;
+ app_cb cb;
+ int cmd_state;
+ void *priv;
+ uint32_t io_mode;
+ uint64_t time_stamp;
+ struct apr_device *adev;
+ struct mutex cmd_lock;
+ wait_queue_head_t cmd_wait;
+ int perf_mode;
+ int stream_id;
+ struct device *dev;
+};
+
+struct q6asm {
+ struct apr_device *adev;
+ int mem_state;
+ struct device *dev;
+ wait_queue_head_t mem_wait;
+ struct mutex session_lock;
+ struct platform_device *pcmdev;
+ struct audio_client *session[MAX_SESSIONS + 1];
+};
+
+static int q6asm_session_alloc(struct audio_client *ac, struct q6asm *a)
+{
+ int n = -EINVAL;
+
+ mutex_lock(&a->session_lock);
+ for (n = 1; n <= MAX_SESSIONS; n++) {
+ if (!a->session[n]) {
+ a->session[n] = ac;
+ break;
+ }
+ }
+ mutex_unlock(&a->session_lock);
+
+ return n;
+}
+
+static bool q6asm_is_valid_audio_client(struct audio_client *ac)
+{
+ struct q6asm *a = dev_get_drvdata(ac->dev->parent);
+ int n;
+
+ for (n = 1; n <= MAX_SESSIONS; n++) {
+ if (a->session[n] == ac)
+ return 1;
+ }
+
+ return 0;
+}
+
+static void q6asm_session_free(struct audio_client *ac)
+{
+ struct q6asm *a = dev_get_drvdata(ac->dev->parent);
+
+ if (!a)
+ return;
+
+ mutex_lock(&a->session_lock);
+ a->session[ac->session] = 0;
+ ac->session = 0;
+ ac->perf_mode = LEGACY_PCM_MODE;
+ mutex_unlock(&a->session_lock);
+}
+
+/**
+ * q6asm_audio_client_free() - Freee allocated audio client
+ *
+ * @ac: audio client to free
+ */
+void q6asm_audio_client_free(struct audio_client *ac)
+{
+ q6asm_session_free(ac);
+ kfree(ac);
+}
+EXPORT_SYMBOL_GPL(q6asm_audio_client_free);
+
+static struct audio_client *q6asm_get_audio_client(struct q6asm *a,
+ int session_id)
+{
+ if ((session_id <= 0) || (session_id > MAX_SESSIONS)) {
+ dev_err(a->dev, "invalid session: %d\n", session_id);
+ goto err;
+ }
+
+ if (!a->session[session_id]) {
+ dev_err(a->dev, "session not active: %d\n", session_id);
+ goto err;
+ }
+ return a->session[session_id];
+err:
+ return NULL;
+}
+
+static int q6asm_srvc_callback(struct apr_device *adev, struct apr_client_data *data)
+{
+ struct q6asm *q6asm = dev_get_drvdata(&adev->dev);
+ struct audio_client *ac = NULL;
+ uint32_t sid = 0;
+ uint32_t *payload;
+
+ if (!data) {
+ dev_err(&adev->dev, "%s: Invalid CB\n", __func__);
+ return 0;
+ }
+
+ payload = data->payload;
+ sid = (data->token >> 8) & 0x0F;
+ ac = q6asm_get_audio_client(q6asm, sid);
+ if (!ac) {
+ dev_err(&adev->dev, "Audio Client not active\n");
+ return 0;
+ }
+
+ if (ac->cb)
+ ac->cb(data->opcode, data->token, data->payload, ac->priv);
+ return 0;
+}
+
+/**
+ * q6asm_get_session_id() - get session id for audio client
+ *
+ * @ac: audio client pointer
+ *
+ * Return: Will be an session id of the audio client.
+ */
+int q6asm_get_session_id(struct audio_client *c)
+{
+ return c->session;
+}
+EXPORT_SYMBOL_GPL(q6asm_get_session_id);
+
+/**
+ * q6asm_audio_client_alloc() - Allocate a new audio client
+ *
+ * @dev: Pointer to asm child device.
+ * @cb: event callback.
+ * @priv: private data associated with this client.
+ *
+ * Return: Will be an error pointer on error or a valid audio client
+ * on success.
+ */
+struct audio_client *q6asm_audio_client_alloc(struct device *dev,
+ app_cb cb, void *priv)
+{
+ struct q6asm *a = dev_get_drvdata(dev->parent);
+ struct audio_client *ac;
+ int n;
+
+ ac = kzalloc(sizeof(struct audio_client), GFP_KERNEL);
+ if (!ac)
+ return NULL;
+
+ n = q6asm_session_alloc(ac, a);
+ if (n <= 0) {
+ dev_err(dev, "ASM Session alloc fail n=%d\n", n);
+ kfree(ac);
+ return NULL;
+ }
+
+ ac->session = n;
+ ac->cb = cb;
+ ac->dev = dev;
+ ac->priv = priv;
+ ac->io_mode = SYNC_IO_MODE;
+ ac->perf_mode = LEGACY_PCM_MODE;
+ /* DSP expects stream id from 1 */
+ ac->stream_id = 1;
+ ac->adev = a->adev;
+
+ init_waitqueue_head(&ac->cmd_wait);
+ mutex_init(&ac->cmd_lock);
+ ac->cmd_state = 0;
+
+ return ac;
+}
+EXPORT_SYMBOL_GPL(q6asm_audio_client_alloc);
+
+
+static int q6asm_probe(struct apr_device *adev)
+{
+ struct q6asm *q6asm;
+
+ q6asm = devm_kzalloc(&adev->dev, sizeof(*q6asm), GFP_KERNEL);
+ if (!q6asm)
+ return -ENOMEM;
+
+ q6asm->dev = &adev->dev;
+ q6asm->adev = adev;
+ q6asm->mem_state = 0;
+ init_waitqueue_head(&q6asm->mem_wait);
+ mutex_init(&q6asm->session_lock);
+ dev_set_drvdata(&adev->dev, q6asm);
+
+ q6asm->pcmdev = platform_device_register_data(&adev->dev,
+ "q6asm_dai", -1, NULL, 0);
+
+ return 0;
+}
+
+static int q6asm_remove(struct apr_device *adev)
+{
+ struct q6asm *q6asm = dev_get_drvdata(&adev->dev);
+
+ platform_device_unregister(q6asm->pcmdev);
+
+ return 0;
+}
+
+static const struct apr_device_id q6asm_id[] = {
+ {"Q6ASM", APR_DOMAIN_ADSP, APR_SVC_ASM, APR_CLIENT_AUDIO},
+ {}
+};
+
+static struct apr_driver qcom_q6asm_driver = {
+ .probe = q6asm_probe,
+ .remove = q6asm_remove,
+ .callback = q6asm_srvc_callback,
+ .id_table = q6asm_id,
+ .driver = {
+ .name = "qcom-q6asm",
+ },
+};
+
+module_apr_driver(qcom_q6asm_driver);
+MODULE_DESCRIPTION("Q6 Audio Stream Manager driver");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/qcom/qdsp6/q6asm.h b/sound/soc/qcom/qdsp6/q6asm.h
new file mode 100644
index 000000000000..7a8a9039fd89
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6asm.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __Q6_ASM_H__
+#define __Q6_ASM_H__
+
+#define MAX_SESSIONS 16
+
+typedef void (*app_cb) (uint32_t opcode, uint32_t token,
+ uint32_t *payload, void *priv);
+struct audio_client;
+struct audio_client *q6asm_audio_client_alloc(struct device *dev,
+ app_cb cb, void *priv);
+void q6asm_audio_client_free(struct audio_client *ac);
+int q6asm_get_session_id(struct audio_client *ac);
+#endif /* __Q6_ASM_H__ */
--
2.15.0
^ permalink raw reply related
* [RESEND PATCH v2 05/15] ASoC: qcom: qdsp6: Add support to Q6ADM
From: srinivas.kandagatla at linaro.org @ 2017-12-14 17:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171214173402.19074-1-srinivas.kandagatla@linaro.org>
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch adds support to q6 ADM (Audio Device Manager) module in
q6dsp. ADM performs routing between audio streams and AFE ports.
It does Rate matching for streams going to devices driven by
different clocks, it handles volume ramping, Mixing with channel
and bit-width. ADM creates and destroys dynamic COPP services
for device-related audio processing as needed.
This patch adds basic support to ADM.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
sound/soc/qcom/Kconfig | 5 +
sound/soc/qcom/qdsp6/Makefile | 1 +
sound/soc/qcom/qdsp6/q6adm.c | 602 ++++++++++++++++++++++++++++++++++++++++++
sound/soc/qcom/qdsp6/q6adm.h | 24 ++
4 files changed, 632 insertions(+)
create mode 100644 sound/soc/qcom/qdsp6/q6adm.c
create mode 100644 sound/soc/qcom/qdsp6/q6adm.h
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 1db92069a6a0..a307880dc992 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -48,9 +48,14 @@ config SND_SOC_QDSP6_AFE
tristate
default n
+config SND_SOC_QDSP6_ADM
+ tristate
+ default n
+
config SND_SOC_QDSP6
tristate "SoC ALSA audio driver for QDSP6"
select SND_SOC_QDSP6_AFE
+ select SND_SOC_QDSP6_ADM
help
To add support for MSM QDSP6 Soc Audio.
This will enable sound soc platform specific
diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile
index 313e65f571db..052813ea7062 100644
--- a/sound/soc/qcom/qdsp6/Makefile
+++ b/sound/soc/qcom/qdsp6/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_SND_SOC_QDSP6_AFE) += q6afe.o
+obj-$(CONFIG_SND_SOC_QDSP6_ADM) += q6adm.o
diff --git a/sound/soc/qcom/qdsp6/q6adm.c b/sound/soc/qcom/qdsp6/q6adm.c
new file mode 100644
index 000000000000..b9f79a198ea4
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6adm.c
@@ -0,0 +1,602 @@
+/* SPDX-License-Identifier: GPL-2.0
+* Copyright (c) 2011-2016, The Linux Foundation
+* Copyright (c) 2017, Linaro Limited
+*/
+
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/jiffies.h>
+#include <linux/wait.h>
+#include <linux/soc/qcom/apr.h>
+#include <linux/platform_device.h>
+#include <sound/asound.h>
+#include "q6adm.h"
+#include "q6afe.h"
+#include "common.h"
+
+#define ADM_CMD_DEVICE_OPEN_V5 0x00010326
+#define ADM_CMDRSP_DEVICE_OPEN_V5 0x00010329
+#define ADM_CMD_DEVICE_CLOSE_V5 0x00010327
+#define ADM_CMD_MATRIX_MAP_ROUTINGS_V5 0x00010325
+
+#define TIMEOUT_MS 1000
+#define RESET_COPP_ID 99
+#define INVALID_COPP_ID 0xFF
+/* Definition for a legacy device session. */
+#define ADM_LEGACY_DEVICE_SESSION 0
+#define ADM_MATRIX_ID_AUDIO_RX 0
+
+struct copp {
+ int afe_port;
+ int copp_idx;
+ int id;
+ int cnt;
+ int topology;
+ int mode;
+ int stat;
+ int rate;
+ int bit_width;
+ int channels;
+ int app_type;
+ int acdb_id;
+ wait_queue_head_t wait;
+ struct list_head node;
+ struct q6adm *adm;
+};
+
+struct q6adm {
+ struct apr_device *apr;
+ struct device *dev;
+ unsigned long copp_bitmap[AFE_MAX_PORTS];
+ struct list_head copps_list;
+ spinlock_t copps_list_lock;
+ int matrix_map_stat;
+ struct platform_device *routing_dev;
+
+ wait_queue_head_t matrix_map_wait;
+};
+
+static struct copp *adm_find_copp(struct q6adm *adm, int port_idx, int copp_idx)
+{
+ struct copp *c;
+
+ spin_lock(&adm->copps_list_lock);
+ list_for_each_entry(c, &adm->copps_list, node) {
+ if ((port_idx == c->afe_port) && (copp_idx == c->copp_idx)) {
+ spin_unlock(&adm->copps_list_lock);
+ return c;
+ }
+ }
+
+ spin_unlock(&adm->copps_list_lock);
+ return NULL;
+
+}
+
+static struct copp *adm_find_matching_copp(struct q6adm *adm,
+ int port_idx, int topology,
+ int mode, int rate,
+ int bit_width, int app_type)
+{
+ struct copp *c;
+
+ spin_lock(&adm->copps_list_lock);
+
+ list_for_each_entry(c, &adm->copps_list, node) {
+ if ((port_idx == c->afe_port) && (topology == c->topology) &&
+ (mode == c->mode) && (rate == c->rate) &&
+ (bit_width == c->bit_width) && (app_type == c->app_type)) {
+ spin_unlock(&adm->copps_list_lock);
+ return c;
+ }
+ }
+ spin_unlock(&adm->copps_list_lock);
+
+ return NULL;
+
+}
+
+static int adm_callback(struct apr_device *adev, struct apr_client_data *data)
+{
+ uint32_t *payload;
+ int port_idx, copp_idx;
+ struct copp *copp;
+ struct q6adm *adm = dev_get_drvdata(&adev->dev);
+
+ payload = data->payload;
+
+ if (data->payload_size) {
+ copp_idx = (data->token) & 0XFF;
+ port_idx = ((data->token) >> 16) & 0xFF;
+ if (port_idx < 0 || port_idx >= AFE_MAX_PORTS) {
+ dev_err(&adev->dev, "Invalid port idx %d token %d\n",
+ port_idx, data->token);
+ return 0;
+ }
+ if (copp_idx < 0 || copp_idx >= MAX_COPPS_PER_PORT) {
+ dev_err(&adev->dev, "Invalid copp idx %d token %d\n",
+ copp_idx, data->token);
+ return 0;
+ }
+
+ if (data->opcode == APR_BASIC_RSP_RESULT) {
+ if (payload[1] != 0) {
+ dev_err(&adev->dev, "cmd = 0x%x returned error = 0x%x\n",
+ payload[0], payload[1]);
+ }
+ switch (payload[0]) {
+ case ADM_CMD_DEVICE_OPEN_V5:
+ case ADM_CMD_DEVICE_CLOSE_V5:
+ copp = adm_find_copp(adm, port_idx, copp_idx);
+ if (IS_ERR_OR_NULL(copp))
+ return 0;
+
+ copp->stat = payload[1];
+ wake_up(&copp->wait);
+ break;
+ case ADM_CMD_MATRIX_MAP_ROUTINGS_V5:
+ adm->matrix_map_stat = payload[1];
+ wake_up(&adm->matrix_map_wait);
+ break;
+
+ default:
+ dev_err(&adev->dev, "Unknown Cmd: 0x%x\n",
+ payload[0]);
+ break;
+ }
+ return 0;
+ }
+
+ switch (data->opcode) {
+ case ADM_CMDRSP_DEVICE_OPEN_V5:{
+ struct adm_cmd_rsp_device_open_v5 {
+ u32 status;
+ u16 copp_id;
+ u16 reserved;
+ } __packed * open = data->payload;
+
+ open = data->payload;
+ copp = adm_find_copp(adm, port_idx, copp_idx);
+ if (IS_ERR_OR_NULL(copp))
+ return 0;
+
+ if (open->copp_id == INVALID_COPP_ID) {
+ dev_err(&adev->dev, "Invalid coppid rxed %d\n",
+ open->copp_id);
+ copp->stat = ADSP_EBADPARAM;
+ wake_up(&copp->wait);
+ break;
+ }
+ copp->stat = payload[0];
+ copp->id = open->copp_id;
+ pr_debug("%s: coppid rxed=%d\n", __func__,
+ open->copp_id);
+ wake_up(&copp->wait);
+
+ }
+ break;
+ default:
+ dev_err(&adev->dev, "Unknown cmd:0x%x\n",
+ data->opcode);
+ break;
+ }
+ }
+ return 0;
+}
+
+static struct copp *adm_alloc_copp(struct q6adm *adm, int port_idx)
+{
+ struct copp *c;
+ int idx;
+
+ idx = find_first_zero_bit(&adm->copp_bitmap[port_idx],
+ MAX_COPPS_PER_PORT);
+
+ if (idx > MAX_COPPS_PER_PORT)
+ return ERR_PTR(-EBUSY);
+
+ set_bit(idx, &adm->copp_bitmap[port_idx]);
+
+ c = devm_kzalloc(adm->dev, sizeof(*c), GFP_KERNEL);
+ if (!c)
+ return ERR_PTR(-ENOMEM);
+ c->copp_idx = idx;
+ c->afe_port = port_idx;
+ c->adm = adm;
+
+ init_waitqueue_head(&c->wait);
+
+ spin_lock(&adm->copps_list_lock);
+ list_add_tail(&c->node, &adm->copps_list);
+ spin_unlock(&adm->copps_list_lock);
+
+ return c;
+}
+
+static void adm_free_copp(struct q6adm *adm, struct copp *c, int port_idx)
+{
+ clear_bit(c->copp_idx, &adm->copp_bitmap[port_idx]);
+ spin_lock(&adm->copps_list_lock);
+ list_del(&c->node);
+ spin_unlock(&adm->copps_list_lock);
+}
+/**
+ * q6adm_open() - open adm to get hold of free copp
+ *
+ * @dev: Pointer to adm child device.
+ * @port_id: port id
+ * @path: playback or capture path.
+ * @rate: rate at which copp is required.
+ * @channel_mode: channel mode
+ * @topology: adm topology id
+ * @perf_mode: performace mode.
+ * @bit_width: audio sample bit width
+ * @app_type: Application type.
+ * @acdb_id: ACDB id
+ *
+ * Return: Will be an negative on error or a valid copp index on success.
+ */
+int q6adm_open(struct device *dev, int port_id, int path, int rate,
+ int channel_mode, int topology, int perf_mode,
+ uint16_t bit_width, int app_type, int acdb_id)
+{
+ struct adm_cmd_device_open_v5 {
+ struct apr_hdr hdr;
+ u16 flags;
+ u16 mode_of_operation;
+ u16 endpoint_id_1;
+ u16 endpoint_id_2;
+ u32 topology_id;
+ u16 dev_num_channel;
+ u16 bit_width;
+ u32 sample_rate;
+ u8 dev_channel_mapping[8];
+ } __packed open;
+ int ret = 0;
+ int port_idx, flags;
+ int tmp_port = q6afe_get_port_id(port_id);
+ struct copp *copp;
+ struct q6adm *adm = dev_get_drvdata(dev->parent);
+
+ port_idx = port_id;
+ if (port_idx < 0) {
+ dev_err(dev, "Invalid port_id 0x%x\n", port_id);
+ return -EINVAL;
+ }
+
+ flags = ADM_LEGACY_DEVICE_SESSION;
+ copp = adm_find_matching_copp(adm, port_idx, topology, perf_mode,
+ rate, bit_width, app_type);
+
+ if (!copp) {
+ copp = adm_alloc_copp(adm, port_idx);
+ if (IS_ERR_OR_NULL(copp))
+ return PTR_ERR(copp);
+
+ copp->cnt = 0;
+ copp->topology = topology;
+ copp->mode = perf_mode;
+ copp->rate = rate;
+ copp->channels = channel_mode;
+ copp->bit_width = bit_width;
+ copp->app_type = app_type;
+ }
+
+ /* Create a COPP if port id are not enabled */
+ if (copp->cnt == 0) {
+
+ open.hdr.hdr_field = APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD,
+ APR_HDR_LEN(APR_HDR_SIZE),
+ APR_PKT_VER);
+ open.hdr.pkt_size = sizeof(open);
+ open.hdr.src_svc = APR_SVC_ADM;
+ open.hdr.src_domain = APR_DOMAIN_APPS;
+ open.hdr.src_port = tmp_port;
+ open.hdr.dest_svc = APR_SVC_ADM;
+ open.hdr.dest_domain = APR_DOMAIN_ADSP;
+ open.hdr.dest_port = tmp_port;
+ open.hdr.token = port_idx << 16 | copp->copp_idx;
+ open.hdr.opcode = ADM_CMD_DEVICE_OPEN_V5;
+ open.flags = flags;
+ open.mode_of_operation = path;
+ open.endpoint_id_1 = tmp_port;
+ open.topology_id = topology;
+ open.dev_num_channel = channel_mode & 0x00FF;
+ open.bit_width = bit_width;
+ open.sample_rate = rate;
+
+ ret = q6dsp_map_channels(&open.dev_channel_mapping[0],
+ channel_mode);
+
+ if (ret)
+ return ret;
+
+ copp->stat = -1;
+ ret = apr_send_pkt(adm->apr, (uint32_t *)&open);
+ if (ret < 0) {
+ dev_err(dev, "port_id: 0x%x for[0x%x] failed %d\n",
+ tmp_port, port_id, ret);
+ return -EINVAL;
+ }
+ /* Wait for the callback with copp id */
+ ret =
+ wait_event_timeout(copp->wait, copp->stat >= 0,
+ msecs_to_jiffies(TIMEOUT_MS));
+ if (!ret) {
+ dev_err(dev, "ADM timedout port_id: 0x%x for [0x%x]\n",
+ tmp_port, port_id);
+ return -EINVAL;
+ } else if (copp->stat > 0) {
+ dev_err(dev, "DSP returned error[%s]\n",
+ adsp_err_get_err_str(copp->stat));
+ return adsp_err_get_lnx_err_code(copp->stat);
+ }
+ }
+ copp->cnt++;
+ return copp->copp_idx;
+}
+EXPORT_SYMBOL_GPL(q6adm_open);
+/**
+ * q6adm_matrix_map() - Map asm streams and afe ports using payload
+ *
+ * @dev: Pointer to adm child device.
+ * @path: playback or capture path.
+ * @payload_map: map between session id and afe ports.
+ * @perf_mode: Performace mode.
+ *
+ * Return: Will be an negative on error or a zero on success.
+ */
+int q6adm_matrix_map(struct device *dev, int path,
+ struct route_payload payload_map, int perf_mode)
+{
+ struct adm_cmd_matrix_map_routings_v5 {
+ struct apr_hdr hdr;
+ u32 matrix_id;
+ u32 num_sessions;
+ } __packed * route;
+
+ struct adm_session_map_node_v5 {
+ u16 session_id;
+ u16 num_copps;
+ } __packed * node;
+ struct q6adm *adm = dev_get_drvdata(dev->parent);
+ uint16_t *copps_list;
+ int cmd_size = 0;
+ int ret = 0, i = 0;
+ void *payload = NULL;
+ void *matrix_map = NULL;
+ int port_idx, copp_idx;
+ struct copp *copp;
+
+ /* Assumes port_ids have already been validated during adm_open */
+ cmd_size = (sizeof(*route) +
+ sizeof(*node) +
+ (sizeof(uint32_t) * payload_map.num_copps));
+ matrix_map = kzalloc(cmd_size, GFP_KERNEL);
+ if (!matrix_map)
+ return -ENOMEM;
+
+ route = (struct adm_cmd_matrix_map_routings_v5 *)matrix_map;
+ route->hdr.hdr_field = APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD,
+ APR_HDR_LEN(APR_HDR_SIZE),
+ APR_PKT_VER);
+ route->hdr.pkt_size = cmd_size;
+ route->hdr.src_svc = 0;
+ route->hdr.src_domain = APR_DOMAIN_APPS;
+ route->hdr.src_port = 0; /* Ignored */
+ route->hdr.dest_svc = APR_SVC_ADM;
+ route->hdr.dest_domain = APR_DOMAIN_ADSP;
+ route->hdr.dest_port = 0; /* Ignored */
+ route->hdr.token = 0;
+ route->hdr.opcode = ADM_CMD_MATRIX_MAP_ROUTINGS_V5;
+ route->num_sessions = 1;
+
+ switch (path) {
+ case ADM_PATH_PLAYBACK:
+ route->matrix_id = ADM_MATRIX_ID_AUDIO_RX;
+ break;
+ default:
+ dev_err(dev, "Wrong path set[%d]\n", path);
+
+ break;
+ }
+
+ payload = ((u8 *) matrix_map + sizeof(*route));
+ node = (struct adm_session_map_node_v5 *)payload;
+
+ node->session_id = payload_map.session_id;
+ node->num_copps = payload_map.num_copps;
+ payload = (u8 *) node + sizeof(*node);
+ copps_list = (uint16_t *) payload;
+
+ for (i = 0; i < payload_map.num_copps; i++) {
+ port_idx = payload_map.port_id[i];
+ if (port_idx < 0) {
+ dev_err(dev, "Invalid port_id 0x%x\n",
+ payload_map.port_id[i]);
+ return -EINVAL;
+ }
+ copp_idx = payload_map.copp_idx[i];
+
+ copp = adm_find_copp(adm, port_idx, copp_idx);
+ if (IS_ERR_OR_NULL(copp))
+ return -EINVAL;
+
+ copps_list[i] = copp->id;
+ }
+
+ adm->matrix_map_stat = -1;
+
+ ret = apr_send_pkt(adm->apr, (uint32_t *) matrix_map);
+ if (ret < 0) {
+ dev_err(dev, "routing for syream %d failed ret %d\n",
+ payload_map.session_id, ret);
+ ret = -EINVAL;
+ goto fail_cmd;
+ }
+ ret = wait_event_timeout(adm->matrix_map_wait,
+ adm->matrix_map_stat >= 0,
+ msecs_to_jiffies(TIMEOUT_MS));
+ if (!ret) {
+ dev_err(dev, "routing for syream %d failed\n",
+ payload_map.session_id);
+ ret = -EINVAL;
+ goto fail_cmd;
+ } else if (adm->matrix_map_stat > 0) {
+ dev_err(dev, "DSP returned error[%s]\n",
+ adsp_err_get_err_str(adm->matrix_map_stat));
+ ret = adsp_err_get_lnx_err_code(adm->matrix_map_stat);
+ goto fail_cmd;
+ }
+
+fail_cmd:
+ kfree(matrix_map);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(q6adm_matrix_map);
+
+static void adm_reset_copp(struct copp *c)
+{
+ c->id = RESET_COPP_ID;
+ c->cnt = 0;
+ c->topology = 0;
+ c->mode = 0;
+ c->stat = -1;
+ c->rate = 0;
+ c->channels = 0;
+ c->bit_width = 0;
+ c->app_type = 0;
+}
+/**
+ * q6adm_close() - Close adm copp
+ *
+ * @dev: Pointer to adm child device.
+ * @port_id: afe port id.
+ * @perf_mode: perf_mode mode
+ * @copp_idx: copp index to close
+ *
+ * Return: Will be an negative on error or a zero on success.
+ */
+int q6adm_close(struct device *dev, int port_id, int perf_mode, int copp_idx)
+{
+ struct apr_hdr close;
+ struct copp *copp;
+
+ int ret = 0, port_idx;
+ int copp_id = RESET_COPP_ID;
+ struct q6adm *adm = dev_get_drvdata(dev->parent);
+
+ port_idx = port_id;
+ if (port_idx < 0) {
+ dev_err(dev, "Invalid port_id 0x%x\n", port_id);
+ return -EINVAL;
+ }
+
+ if ((copp_idx < 0) || (copp_idx >= MAX_COPPS_PER_PORT)) {
+ dev_err(dev, "Invalid copp idx: %d\n", copp_idx);
+ return -EINVAL;
+ }
+
+ copp = adm_find_copp(adm, port_id, copp_idx);
+ if (IS_ERR_OR_NULL(copp))
+ return -EINVAL;
+
+ copp->cnt--;
+ if (!copp->cnt) {
+ copp_id = copp->id;
+
+ close.hdr_field = APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD,
+ APR_HDR_LEN(APR_HDR_SIZE),
+ APR_PKT_VER);
+ close.pkt_size = sizeof(close);
+ close.src_svc = APR_SVC_ADM;
+ close.src_domain = APR_DOMAIN_APPS;
+ close.src_port = port_id;
+ close.dest_svc = APR_SVC_ADM;
+ close.dest_domain = APR_DOMAIN_ADSP;
+ close.dest_port = copp_id;
+ close.token = port_idx << 16 | copp_idx;
+ close.opcode = ADM_CMD_DEVICE_CLOSE_V5;
+
+ ret = apr_send_pkt(adm->apr, (uint32_t *) &close);
+ if (ret < 0) {
+ dev_err(dev, "ADM close failed %d\n", ret);
+ return -EINVAL;
+ }
+
+ ret = wait_event_timeout(copp->wait, copp->stat >= 0,
+ msecs_to_jiffies(TIMEOUT_MS));
+ if (!ret) {
+ dev_err(dev, "ADM cmd Route timedout for port 0x%x\n",
+ port_id);
+ return -EINVAL;
+ } else if (copp->stat > 0) {
+ dev_err(dev, "DSP returned error[%s]\n",
+ adsp_err_get_err_str(copp->stat));
+ return adsp_err_get_lnx_err_code(copp->stat);
+ }
+
+ adm_reset_copp(copp);
+ adm_free_copp(adm, copp, port_id);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(q6adm_close);
+
+static int q6adm_probe(struct apr_device *adev)
+{
+ struct q6adm *adm;
+
+ adm = devm_kzalloc(&adev->dev, sizeof(*adm), GFP_KERNEL);
+ if (!adm)
+ return -ENOMEM;
+
+ adm->apr = adev;
+ dev_set_drvdata(&adev->dev, adm);
+ adm->dev = &adev->dev;
+ adm->matrix_map_stat = 0;
+ init_waitqueue_head(&adm->matrix_map_wait);
+
+ INIT_LIST_HEAD(&adm->copps_list);
+ spin_lock_init(&adm->copps_list_lock);
+
+ adm->routing_dev = platform_device_register_data(&adev->dev,
+ "q6routing",
+ -1, NULL, 0);
+
+
+ return 0;
+}
+
+static int q6adm_exit(struct apr_device *adev)
+{
+ struct q6adm *adm = dev_get_drvdata(&adev->dev);
+
+ platform_device_unregister(adm->routing_dev);
+
+ return 0;
+}
+
+static const struct apr_device_id adm_id[] = {
+ {"Q6ADM", APR_DOMAIN_ADSP, APR_SVC_ADM, APR_CLIENT_AUDIO},
+ {}
+};
+
+static struct apr_driver qcom_q6adm_driver = {
+ .probe = q6adm_probe,
+ .remove = q6adm_exit,
+ .callback = adm_callback,
+ .id_table = adm_id,
+ .driver = {
+ .name = "qcom-q6adm",
+ },
+};
+
+module_apr_driver(qcom_q6adm_driver);
+MODULE_DESCRIPTION("Q6 Audio Device Manager");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/qcom/qdsp6/q6adm.h b/sound/soc/qcom/qdsp6/q6adm.h
new file mode 100644
index 000000000000..aa7b3ba4360b
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6adm.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __Q6_ADM_V2_H__
+#define __Q6_ADM_V2_H__
+
+#define ADM_PATH_PLAYBACK 0x1
+#define MAX_COPPS_PER_PORT 8
+#define NULL_COPP_TOPOLOGY 0x00010312
+
+/* multiple copp per stream. */
+struct route_payload {
+ int num_copps;
+ int session_id;
+ int copp_idx[MAX_COPPS_PER_PORT];
+ int port_id[MAX_COPPS_PER_PORT];
+};
+
+int q6adm_open(struct device *dev, int port_id, int path, int rate,
+ int channel_mode, int topology, int perf_mode,
+ uint16_t bit_width, int app_type, int acdb_id);
+int q6adm_close(struct device *dev, int port, int topology, int perf_mode);
+int q6adm_matrix_map(struct device *dev, int path,
+ struct route_payload payload_map, int perf_mode);
+
+#endif /* __Q6_ADM_V2_H__ */
--
2.15.0
^ permalink raw reply related
* [RESEND PATCH v2 04/15] ASoC: qcom: qdsp6: Add support to Q6AFE
From: srinivas.kandagatla at linaro.org @ 2017-12-14 17:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171214173402.19074-1-srinivas.kandagatla@linaro.org>
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch adds support to q6 AFE (Audio Front End) module on Q6DSP.
AFE module sits right at the other end of cpu where the codec/audio
devices are connected.
AFE provides abstraced interfaces to both hardware and virtual devices.
Each AFE tx/rx port can be configured to connect to one of the hardware
devices like codec, hdmi, slimbus, i2s and so on. AFE services include
starting, stopping, and if needed, any configurations of the ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
sound/soc/qcom/Kconfig | 13 ++
sound/soc/qcom/Makefile | 5 +
sound/soc/qcom/qdsp6/Makefile | 1 +
sound/soc/qcom/qdsp6/q6afe.c | 503 ++++++++++++++++++++++++++++++++++++++++++
sound/soc/qcom/qdsp6/q6afe.h | 30 +++
5 files changed, 552 insertions(+)
create mode 100644 sound/soc/qcom/qdsp6/Makefile
create mode 100644 sound/soc/qcom/qdsp6/q6afe.c
create mode 100644 sound/soc/qcom/qdsp6/q6afe.h
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 8ec9a074b38b..1db92069a6a0 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -43,3 +43,16 @@ config SND_SOC_APQ8016_SBC
Support for Qualcomm Technologies LPASS audio block in
APQ8016 SOC-based systems.
Say Y if you want to use audio devices on MI2S.
+
+config SND_SOC_QDSP6_AFE
+ tristate
+ default n
+
+config SND_SOC_QDSP6
+ tristate "SoC ALSA audio driver for QDSP6"
+ select SND_SOC_QDSP6_AFE
+ help
+ To add support for MSM QDSP6 Soc Audio.
+ This will enable sound soc platform specific
+ audio drivers. This includes q6asm, q6adm,
+ q6afe interfaces to DSP using apr.
diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
index d5280355c24f..748f5e891dcf 100644
--- a/sound/soc/qcom/Makefile
+++ b/sound/soc/qcom/Makefile
@@ -13,6 +13,11 @@ obj-$(CONFIG_SND_SOC_LPASS_APQ8016) += snd-soc-lpass-apq8016.o
# Machine
snd-soc-storm-objs := storm.o
snd-soc-apq8016-sbc-objs := apq8016_sbc.o
+snd-soc-msm8996-objs := apq8096.o
obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
+obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-msm8996.o
+
+#DSP lib
+obj-$(CONFIG_SND_SOC_QDSP6) += qdsp6/
diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile
new file mode 100644
index 000000000000..313e65f571db
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SND_SOC_QDSP6_AFE) += q6afe.o
diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c
new file mode 100644
index 000000000000..a6a782e6f17d
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6afe.c
@@ -0,0 +1,503 @@
+/* SPDX-License-Identifier: GPL-2.0
+* Copyright (c) 2011-2016, The Linux Foundation
+* Copyright (c) 2017, Linaro Limited
+*/
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/uaccess.h>
+#include <linux/wait.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/soc/qcom/apr.h>
+#include "common.h"
+#include "q6afe.h"
+
+/* AFE CMDs */
+#define AFE_PORT_CMD_DEVICE_START 0x000100E5
+#define AFE_PORT_CMD_DEVICE_STOP 0x000100E6
+#define AFE_PORT_CMD_SET_PARAM_V2 0x000100EF
+#define AFE_PORT_CMDRSP_GET_PARAM_V2 0x00010106
+#define AFE_PARAM_ID_HDMI_CONFIG 0x00010210
+#define AFE_MODULE_AUDIO_DEV_INTERFACE 0x0001020C
+
+/* Port IDs */
+#define AFE_API_VERSION_HDMI_CONFIG 0x1
+#define AFE_PORT_ID_MULTICHAN_HDMI_RX 0x100E
+#define TIMEOUT_MS 1000
+#define AFE_CMD_RESP_AVAIL 0
+#define AFE_CMD_RESP_NONE 1
+
+
+struct q6afev2 {
+ void *apr;
+ struct device *dev;
+ int state;
+ int status;
+ struct platform_device *daidev;
+
+ struct mutex afe_cmd_lock;
+ struct list_head port_list;
+ spinlock_t port_list_lock;
+ struct list_head node;
+};
+
+struct afe_port_cmd_device_start {
+ struct apr_hdr hdr;
+ u16 port_id;
+ u16 reserved;
+} __packed;
+
+struct afe_port_cmd_device_stop {
+ struct apr_hdr hdr;
+ u16 port_id;
+ u16 reserved;
+/* Reserved for 32-bit alignment. This field must be set to 0.*/
+} __packed;
+
+struct afe_port_param_data_v2 {
+ u32 module_id;
+ u32 param_id;
+ u16 param_size;
+ u16 reserved;
+} __packed;
+
+struct afe_port_cmd_set_param_v2 {
+ u16 port_id;
+ u16 payload_size;
+ u32 payload_address_lsw;
+ u32 payload_address_msw;
+ u32 mem_map_handle;
+} __packed;
+
+struct afe_param_id_hdmi_multi_chan_audio_cfg {
+ u32 hdmi_cfg_minor_version;
+ u16 datatype;
+ u16 channel_allocation;
+ u32 sample_rate;
+ u16 bit_width;
+ u16 reserved;
+} __packed;
+
+union afe_port_config {
+ struct afe_param_id_hdmi_multi_chan_audio_cfg hdmi_multi_ch;
+} __packed;
+
+struct q6afe_port {
+ wait_queue_head_t wait;
+ union afe_port_config port_cfg;
+ int token;
+ int id;
+ int cfg_type;
+ union {
+ struct q6afev2 *v2;
+ } afe;
+ struct list_head node;
+};
+
+struct afe_audioif_config_command {
+ struct apr_hdr hdr;
+ struct afe_port_cmd_set_param_v2 param;
+ struct afe_port_param_data_v2 pdata;
+ union afe_port_config port;
+} __packed;
+
+struct afe_port_map {
+ int port_id;
+ int token;
+ int is_rx;
+};
+
+/* Port map of index vs real hw port ids */
+static struct afe_port_map port_maps[AFE_PORT_MAX] = {
+ [AFE_PORT_HDMI_RX] = { AFE_PORT_ID_MULTICHAN_HDMI_RX,
+ AFE_PORT_HDMI_RX, 1},
+};
+
+static struct q6afe_port *afe_find_port(struct q6afev2 *afe, int token)
+{
+ struct q6afe_port *p = NULL;
+
+ spin_lock(&afe->port_list_lock);
+ list_for_each_entry(p, &afe->port_list, node)
+ if (p->token == token)
+ break;
+
+ spin_unlock(&afe->port_list_lock);
+ return p;
+}
+
+static int afe_callback(struct apr_device *adev, struct apr_client_data *data)
+{
+ struct q6afev2 *afe = dev_get_drvdata(&adev->dev);//priv;
+ struct q6afe_port *port;
+
+ if (!data) {
+ dev_err(afe->dev, "%s: Invalid param data\n", __func__);
+ return -EINVAL;
+ }
+
+ if (data->payload_size) {
+ uint32_t *payload = data->payload;
+
+ if (data->opcode == APR_BASIC_RSP_RESULT) {
+ if (payload[1] != 0) {
+ afe->status = payload[1];
+ dev_err(afe->dev,
+ "cmd = 0x%x returned error = 0x%x\n",
+ payload[0], payload[1]);
+ }
+ switch (payload[0]) {
+ case AFE_PORT_CMD_SET_PARAM_V2:
+ case AFE_PORT_CMD_DEVICE_STOP:
+ case AFE_PORT_CMD_DEVICE_START:
+ afe->state = AFE_CMD_RESP_AVAIL;
+ port = afe_find_port(afe, data->token);
+ if (port)
+ wake_up(&port->wait);
+
+ break;
+ default:
+ dev_err(afe->dev, "Unknown cmd 0x%x\n",
+ payload[0]);
+ break;
+ }
+ }
+ }
+ return 0;
+}
+/**
+ * q6afe_get_port_id() - Get port id from a given port index
+ *
+ * @index: port index
+ *
+ * Return: Will be an negative on error or valid port_id on success
+ */
+int q6afe_get_port_id(int index)
+{
+ if (index < 0 || index > AFE_PORT_MAX)
+ return -EINVAL;
+
+ return port_maps[index].port_id;
+}
+EXPORT_SYMBOL_GPL(q6afe_get_port_id);
+
+static int afe_apr_send_pkt(struct q6afev2 *afe, void *data,
+ wait_queue_head_t *wait)
+{
+ int ret;
+
+ if (wait)
+ afe->state = AFE_CMD_RESP_NONE;
+
+ afe->status = 0;
+ ret = apr_send_pkt(afe->apr, data);
+ if (ret > 0) {
+ if (wait) {
+ ret = wait_event_timeout(*wait,
+ (afe->state ==
+ AFE_CMD_RESP_AVAIL),
+ msecs_to_jiffies(TIMEOUT_MS));
+ if (!ret) {
+ ret = -ETIMEDOUT;
+ } else if (afe->status > 0) {
+ dev_err(afe->dev, "DSP returned error[%s]\n",
+ adsp_err_get_err_str(afe->status));
+ ret = adsp_err_get_lnx_err_code(afe->status);
+ } else {
+ ret = 0;
+ }
+ } else {
+ ret = 0;
+ }
+ } else {
+ dev_err(afe->dev, "packet not transmitted\n");
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int afe_send_cmd_port_start(struct q6afe_port *port)
+{
+ u16 port_id = port->id;
+ struct afe_port_cmd_device_start start;
+ struct q6afev2 *afe = port->afe.v2;
+ int ret, index;
+
+ index = port->token;
+ start.hdr.hdr_field = APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD,
+ APR_HDR_LEN(APR_HDR_SIZE),
+ APR_PKT_VER);
+ start.hdr.pkt_size = sizeof(start);
+ start.hdr.src_port = 0;
+ start.hdr.dest_port = 0;
+ start.hdr.token = index;
+ start.hdr.opcode = AFE_PORT_CMD_DEVICE_START;
+ start.port_id = port_id;
+
+ ret = afe_apr_send_pkt(afe, &start, &port->wait);
+ if (ret)
+ dev_err(afe->dev, "AFE enable for port 0x%x failed %d\n",
+ port_id, ret);
+
+ return ret;
+}
+
+static int afe_port_start(struct q6afe_port *port,
+ union afe_port_config *afe_config)
+{
+ struct afe_audioif_config_command config;
+ struct q6afev2 *afe = port->afe.v2;
+ int ret = 0;
+ int port_id = port->id;
+ int cfg_type;
+ int index = 0;
+
+ if (!afe_config) {
+ dev_err(afe->dev, "Error, no configuration data\n");
+ ret = -EINVAL;
+ return ret;
+ }
+
+ index = port->token;
+
+ mutex_lock(&afe->afe_cmd_lock);
+ /* Also send the topology id here: */
+ config.hdr.hdr_field = APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD,
+ APR_HDR_LEN(APR_HDR_SIZE),
+ APR_PKT_VER);
+ config.hdr.pkt_size = sizeof(config);
+ config.hdr.src_port = 0;
+ config.hdr.dest_port = 0;
+ config.hdr.token = index;
+
+ cfg_type = port->cfg_type;
+ config.hdr.opcode = AFE_PORT_CMD_SET_PARAM_V2;
+ config.param.port_id = port_id;
+ config.param.payload_size = sizeof(config) - sizeof(struct apr_hdr) -
+ sizeof(config.param);
+ config.param.payload_address_lsw = 0x00;
+ config.param.payload_address_msw = 0x00;
+ config.param.mem_map_handle = 0x00;
+ config.pdata.module_id = AFE_MODULE_AUDIO_DEV_INTERFACE;
+ config.pdata.param_id = cfg_type;
+ config.pdata.param_size = sizeof(config.port);
+
+ config.port = *afe_config;
+
+ ret = afe_apr_send_pkt(afe, &config, &port->wait);
+ if (ret) {
+ dev_err(afe->dev, "AFE enable for port 0x%x failed %d\n",
+ port_id, ret);
+ goto fail_cmd;
+ }
+
+ ret = afe_send_cmd_port_start(port);
+
+fail_cmd:
+ mutex_unlock(&afe->afe_cmd_lock);
+ return ret;
+}
+
+/**
+ * q6afe_port_stop() - Stop a afe port
+ *
+ * @port: Instance of port to stop
+ *
+ * Return: Will be an negative on packet size on success.
+ */
+int q6afe_port_stop(struct q6afe_port *port)
+{
+ int port_id = port->id;
+ struct afe_port_cmd_device_stop stop;
+ struct q6afev2 *afe = port->afe.v2;
+ int ret = 0;
+ int index = 0;
+
+ port_id = port->id;
+ index = port->token;
+ if (index < 0 || index > AFE_PORT_MAX) {
+ dev_err(afe->dev, "AFE port index[%d] invalid!\n", index);
+ return -EINVAL;
+ }
+
+ stop.hdr.hdr_field = APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD,
+ APR_HDR_LEN(APR_HDR_SIZE),
+ APR_PKT_VER);
+ stop.hdr.pkt_size = sizeof(stop);
+ stop.hdr.src_port = 0;
+ stop.hdr.dest_port = 0;
+ stop.hdr.token = index;
+ stop.hdr.opcode = AFE_PORT_CMD_DEVICE_STOP;
+ stop.port_id = port_id;
+ stop.reserved = 0;
+
+ ret = afe_apr_send_pkt(afe, &stop, &port->wait);
+ if (ret)
+ dev_err(afe->dev, "AFE close failed %d\n", ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(q6afe_port_stop);
+
+/**
+ * q6afe_hdmi_port_prepare() - Prepare hdmi afe port.
+ *
+ * @port: Instance of afe port
+ * @cfg: HDMI configuration for the afe port
+ *
+ */
+void q6afe_hdmi_port_prepare(struct q6afe_port *port,
+ struct q6afe_hdmi_cfg *cfg)
+{
+ union afe_port_config *pcfg = &port->port_cfg;
+
+ pcfg->hdmi_multi_ch.hdmi_cfg_minor_version =
+ AFE_API_VERSION_HDMI_CONFIG;
+ pcfg->hdmi_multi_ch.datatype = cfg->datatype;
+ pcfg->hdmi_multi_ch.channel_allocation = cfg->channel_allocation;
+ pcfg->hdmi_multi_ch.sample_rate = cfg->sample_rate;
+ pcfg->hdmi_multi_ch.bit_width = cfg->bit_width;
+}
+EXPORT_SYMBOL_GPL(q6afe_hdmi_port_prepare);
+
+/**
+ * q6afe_port_start() - Start a afe port
+ *
+ * @port: Instance of port to start
+ *
+ * Return: Will be an negative on packet size on success.
+ */
+int q6afe_port_start(struct q6afe_port *port)
+{
+ return afe_port_start(port, &port->port_cfg);
+}
+EXPORT_SYMBOL_GPL(q6afe_port_start);
+
+/**
+ * q6afe_port_get_from_id() - Get port instance from a port id
+ *
+ * @dev: Pointer to afe child device.
+ * @id: port id
+ *
+ * Return: Will be an error pointer on error or a valid afe port
+ * on success.
+ */
+struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id)
+{
+ int port_id;
+ struct q6afev2 *afe = dev_get_drvdata(dev->parent);
+ struct q6afe_port *port;
+ int token;
+ int cfg_type;
+
+ if (!afe) {
+ dev_err(dev, "Unable to find instance of afe service\n");
+ return ERR_PTR(-ENOENT);
+ }
+
+ token = id;
+ if (token < 0 || token > AFE_PORT_MAX) {
+ dev_err(dev, "AFE port token[%d] invalid!\n", token);
+ return ERR_PTR(-EINVAL);
+ }
+
+ port_id = port_maps[id].port_id;
+
+ port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+ if (!port)
+ return ERR_PTR(-ENOMEM);
+
+ init_waitqueue_head(&port->wait);
+
+ port->token = token;
+ port->id = port_id;
+
+ port->afe.v2 = afe;
+ switch (port_id) {
+ case AFE_PORT_ID_MULTICHAN_HDMI_RX:
+ cfg_type = AFE_PARAM_ID_HDMI_CONFIG;
+ break;
+ default:
+ dev_err(dev, "Invalid port id 0x%x\n", port_id);
+ return ERR_PTR(-EINVAL);
+ }
+
+ port->cfg_type = cfg_type;
+
+ spin_lock(&afe->port_list_lock);
+ list_add_tail(&port->node, &afe->port_list);
+ spin_unlock(&afe->port_list_lock);
+
+ return port;
+
+}
+EXPORT_SYMBOL_GPL(q6afe_port_get_from_id);
+
+/**
+ * q6afe_port_put() - Release port reference
+ *
+ * @port: Instance of port to put
+ */
+void q6afe_port_put(struct q6afe_port *port)
+{
+ struct q6afev2 *afe = port->afe.v2;
+
+ spin_lock(&afe->port_list_lock);
+ list_del(&port->node);
+ spin_unlock(&afe->port_list_lock);
+}
+EXPORT_SYMBOL_GPL(q6afe_port_put);
+
+static int q6afev2_probe(struct apr_device *adev)
+{
+ struct q6afev2 *afe;
+ struct device *dev = &adev->dev;
+
+ afe = devm_kzalloc(dev, sizeof(*afe), GFP_KERNEL);
+ if (!afe)
+ return -ENOMEM;
+
+ afe->apr = adev;
+ mutex_init(&afe->afe_cmd_lock);
+ afe->dev = dev;
+ INIT_LIST_HEAD(&afe->port_list);
+ spin_lock_init(&afe->port_list_lock);
+
+ dev_set_drvdata(dev, afe);
+
+ afe->daidev = platform_device_register_data(&adev->dev, "q6afe_dai",
+ -1, NULL, 0);
+ return 0;
+}
+
+static int q6afev2_remove(struct apr_device *adev)
+{
+ struct q6afev2 *afe = dev_get_drvdata(&adev->dev);
+
+ platform_device_unregister(afe->daidev);
+
+ return 0;
+}
+
+static const struct apr_device_id q6asm_id[] = {
+ {"Q6AFE", APR_DOMAIN_ADSP, APR_SVC_AFE, APR_CLIENT_AUDIO},
+ {}
+};
+
+static struct apr_driver qcom_q6afe_driver = {
+ .probe = q6afev2_probe,
+ .remove = q6afev2_remove,
+ .callback = afe_callback,
+ .id_table = q6asm_id,
+ .driver = {
+ .name = "qcom-q6afe",
+ },
+};
+
+module_apr_driver(qcom_q6afe_driver);
+MODULE_DESCRIPTION("Q6 Audio Front End");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/qcom/qdsp6/q6afe.h b/sound/soc/qcom/qdsp6/q6afe.h
new file mode 100644
index 000000000000..c04541b94a47
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6afe.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __Q6AFE_H__
+#define __Q6AFE_H__
+
+/* Audio Front End (AFE) Ports */
+#define AFE_PORT_HDMI_RX 8
+#define AFE_PORT_MAX 9
+
+#define MSM_AFE_PORT_TYPE_RX 0
+#define MSM_AFE_PORT_TYPE_TX 1
+#define AFE_MAX_PORTS AFE_PORT_MAX
+
+struct q6afe_hdmi_cfg {
+ u16 datatype;
+ u16 channel_allocation;
+ u32 sample_rate;
+ u16 bit_width;
+};
+
+struct q6afe_port;
+
+struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id);
+int q6afe_port_start(struct q6afe_port *port);
+int q6afe_port_stop(struct q6afe_port *port);
+void q6afe_port_put(struct q6afe_port *port);
+int q6afe_get_port_id(int index);
+void q6afe_hdmi_port_prepare(struct q6afe_port *port,
+ struct q6afe_hdmi_cfg *cfg);
+
+#endif /* __Q6AFE_H__ */
--
2.15.0
^ permalink raw reply related
* [RESEND PATCH v2 03/15] ASoC: qcom: qdsp6: Add common qdsp6 helper functions
From: srinivas.kandagatla at linaro.org @ 2017-12-14 17:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171214173402.19074-1-srinivas.kandagatla@linaro.org>
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch adds some common helper functions like translating dsp error
to linux error codes and channel mappings etc.
These functions are used in all the following qdsp6 drivers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
sound/soc/qcom/qdsp6/common.h | 225 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 225 insertions(+)
create mode 100644 sound/soc/qcom/qdsp6/common.h
diff --git a/sound/soc/qcom/qdsp6/common.h b/sound/soc/qcom/qdsp6/common.h
new file mode 100644
index 000000000000..cbd6e009ef4b
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/common.h
@@ -0,0 +1,225 @@
+/*
+ * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __Q6DSP_COMMON_H__
+#define __Q6DSP_COMMON_H__
+
+/* ERROR CODES */
+/* Success. The operation completed with no errors. */
+#define ADSP_EOK 0x00000000
+/* General failure. */
+#define ADSP_EFAILED 0x00000001
+/* Bad operation parameter. */
+#define ADSP_EBADPARAM 0x00000002
+/* Unsupported routine or operation. */
+#define ADSP_EUNSUPPORTED 0x00000003
+/* Unsupported version. */
+#define ADSP_EVERSION 0x00000004
+/* Unexpected problem encountered. */
+#define ADSP_EUNEXPECTED 0x00000005
+/* Unhandled problem occurred. */
+#define ADSP_EPANIC 0x00000006
+/* Unable to allocate resource. */
+#define ADSP_ENORESOURCE 0x00000007
+/* Invalid handle. */
+#define ADSP_EHANDLE 0x00000008
+/* Operation is already processed. */
+#define ADSP_EALREADY 0x00000009
+/* Operation is not ready to be processed. */
+#define ADSP_ENOTREADY 0x0000000A
+/* Operation is pending completion. */
+#define ADSP_EPENDING 0x0000000B
+/* Operation could not be accepted or processed. */
+#define ADSP_EBUSY 0x0000000C
+/* Operation aborted due to an error. */
+#define ADSP_EABORTED 0x0000000D
+/* Operation preempted by a higher priority. */
+#define ADSP_EPREEMPTED 0x0000000E
+/* Operation requests intervention to complete. */
+#define ADSP_ECONTINUE 0x0000000F
+/* Operation requests immediate intervention to complete. */
+#define ADSP_EIMMEDIATE 0x00000010
+/* Operation is not implemented. */
+#define ADSP_ENOTIMPL 0x00000011
+/* Operation needs more data or resources. */
+#define ADSP_ENEEDMORE 0x00000012
+/* Operation does not have memory. */
+#define ADSP_ENOMEMORY 0x00000014
+/* Item does not exist. */
+#define ADSP_ENOTEXIST 0x00000015
+/* Max count for adsp error code sent to HLOS*/
+#define ADSP_ERR_MAX (ADSP_ENOTEXIST + 1)
+/* Operation is finished. */
+#define ADSP_ETERMINATED 0x00011174
+
+/* ERROR STRING */
+/* Success. The operation completed with no errors. */
+#define ADSP_EOK_STR "ADSP_EOK"
+/* General failure. */
+#define ADSP_EFAILED_STR "ADSP_EFAILED"
+/* Bad operation parameter. */
+#define ADSP_EBADPARAM_STR "ADSP_EBADPARAM"
+/* Unsupported routine or operation. */
+#define ADSP_EUNSUPPORTED_STR "ADSP_EUNSUPPORTED"
+/* Unsupported version. */
+#define ADSP_EVERSION_STR "ADSP_EVERSION"
+/* Unexpected problem encountered. */
+#define ADSP_EUNEXPECTED_STR "ADSP_EUNEXPECTED"
+/* Unhandled problem occurred. */
+#define ADSP_EPANIC_STR "ADSP_EPANIC"
+/* Unable to allocate resource. */
+#define ADSP_ENORESOURCE_STR "ADSP_ENORESOURCE"
+/* Invalid handle. */
+#define ADSP_EHANDLE_STR "ADSP_EHANDLE"
+/* Operation is already processed. */
+#define ADSP_EALREADY_STR "ADSP_EALREADY"
+/* Operation is not ready to be processed. */
+#define ADSP_ENOTREADY_STR "ADSP_ENOTREADY"
+/* Operation is pending completion. */
+#define ADSP_EPENDING_STR "ADSP_EPENDING"
+/* Operation could not be accepted or processed. */
+#define ADSP_EBUSY_STR "ADSP_EBUSY"
+/* Operation aborted due to an error. */
+#define ADSP_EABORTED_STR "ADSP_EABORTED"
+/* Operation preempted by a higher priority. */
+#define ADSP_EPREEMPTED_STR "ADSP_EPREEMPTED"
+/* Operation requests intervention to complete. */
+#define ADSP_ECONTINUE_STR "ADSP_ECONTINUE"
+/* Operation requests immediate intervention to complete. */
+#define ADSP_EIMMEDIATE_STR "ADSP_EIMMEDIATE"
+/* Operation is not implemented. */
+#define ADSP_ENOTIMPL_STR "ADSP_ENOTIMPL"
+/* Operation needs more data or resources. */
+#define ADSP_ENEEDMORE_STR "ADSP_ENEEDMORE"
+/* Operation does not have memory. */
+#define ADSP_ENOMEMORY_STR "ADSP_ENOMEMORY"
+/* Item does not exist. */
+#define ADSP_ENOTEXIST_STR "ADSP_ENOTEXIST"
+/* Unexpected error code. */
+#define ADSP_ERR_MAX_STR "ADSP_ERR_MAX"
+
+#define PCM_FORMAT_MAX_NUM_CHANNEL 8
+#define PCM_CHANNEL_NULL 0
+
+#define PCM_CHANNEL_FL 1 /* Front left channel. */
+#define PCM_CHANNEL_FR 2 /* Front right channel. */
+#define PCM_CHANNEL_FC 3 /* Front center channel. */
+#define PCM_CHANNEL_LS 4 /* Left surround channel. */
+#define PCM_CHANNEL_RS 5 /* Right surround channel. */
+#define PCM_CHANNEL_LFE 6 /* Low frequency effect channel. */
+#define PCM_CHANNEL_CS 7 /* Center surround channel; Rear center ch */
+#define PCM_CHANNEL_LB 8 /* Left back channel; Rear left channel. */
+#define PCM_CHANNEL_RB 9 /* Right back channel; Rear right channel. */
+#define PCM_CHANNELS 10 /* Top surround channel. */
+
+static inline int q6dsp_map_channels(u8 *ch_map, int ch)
+{
+ memset(ch_map, 0, PCM_FORMAT_MAX_NUM_CHANNEL);
+
+ if (ch == 1) {
+ ch_map[0] = PCM_CHANNEL_FC;
+ } else if (ch == 2) {
+ ch_map[0] = PCM_CHANNEL_FL;
+ ch_map[1] = PCM_CHANNEL_FR;
+ } else if (ch == 3) {
+ ch_map[0] = PCM_CHANNEL_FL;
+ ch_map[1] = PCM_CHANNEL_FR;
+ ch_map[2] = PCM_CHANNEL_FC;
+ } else if (ch == 4) {
+ ch_map[0] = PCM_CHANNEL_FL;
+ ch_map[1] = PCM_CHANNEL_FR;
+ ch_map[2] = PCM_CHANNEL_LS;
+ ch_map[3] = PCM_CHANNEL_RS;
+ } else if (ch == 5) {
+ ch_map[0] = PCM_CHANNEL_FL;
+ ch_map[1] = PCM_CHANNEL_FR;
+ ch_map[2] = PCM_CHANNEL_FC;
+ ch_map[3] = PCM_CHANNEL_LS;
+ ch_map[4] = PCM_CHANNEL_RS;
+ } else if (ch == 6) {
+ ch_map[0] = PCM_CHANNEL_FL;
+ ch_map[1] = PCM_CHANNEL_FR;
+ ch_map[2] = PCM_CHANNEL_LFE;
+ ch_map[3] = PCM_CHANNEL_FC;
+ ch_map[4] = PCM_CHANNEL_LS;
+ ch_map[5] = PCM_CHANNEL_RS;
+ } else if (ch == 8) {
+ ch_map[0] = PCM_CHANNEL_FL;
+ ch_map[1] = PCM_CHANNEL_FR;
+ ch_map[2] = PCM_CHANNEL_LFE;
+ ch_map[3] = PCM_CHANNEL_FC;
+ ch_map[4] = PCM_CHANNEL_LS;
+ ch_map[5] = PCM_CHANNEL_RS;
+ ch_map[6] = PCM_CHANNEL_LB;
+ ch_map[7] = PCM_CHANNEL_RB;
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+enum {
+ LEGACY_PCM_MODE = 0,
+ LOW_LATENCY_PCM_MODE,
+ ULTRA_LOW_LATENCY_PCM_MODE,
+ ULL_POST_PROCESSING_PCM_MODE,
+};
+
+struct adsp_err_code {
+ int lnx_err_code;
+ char *adsp_err_str;
+};
+
+static struct adsp_err_code adsp_err_code_info[ADSP_ERR_MAX+1] = {
+ { 0, ADSP_EOK_STR},
+ { -ENOTRECOVERABLE, ADSP_EFAILED_STR},
+ { -EINVAL, ADSP_EBADPARAM_STR},
+ { -ENOSYS, ADSP_EUNSUPPORTED_STR},
+ { -ENOPROTOOPT, ADSP_EVERSION_STR},
+ { -ENOTRECOVERABLE, ADSP_EUNEXPECTED_STR},
+ { -ENOTRECOVERABLE, ADSP_EPANIC_STR},
+ { -ENOSPC, ADSP_ENORESOURCE_STR},
+ { -EBADR, ADSP_EHANDLE_STR},
+ { -EALREADY, ADSP_EALREADY_STR},
+ { -EPERM, ADSP_ENOTREADY_STR},
+ { -EINPROGRESS, ADSP_EPENDING_STR},
+ { -EBUSY, ADSP_EBUSY_STR},
+ { -ECANCELED, ADSP_EABORTED_STR},
+ { -EAGAIN, ADSP_EPREEMPTED_STR},
+ { -EAGAIN, ADSP_ECONTINUE_STR},
+ { -EAGAIN, ADSP_EIMMEDIATE_STR},
+ { -EAGAIN, ADSP_ENOTIMPL_STR},
+ { -ENODATA, ADSP_ENEEDMORE_STR},
+ { -EADV, ADSP_ERR_MAX_STR},
+ { -ENOMEM, ADSP_ENOMEMORY_STR},
+ { -ENODEV, ADSP_ENOTEXIST_STR},
+ { -EADV, ADSP_ERR_MAX_STR},
+};
+
+static inline int adsp_err_get_lnx_err_code(u32 adsp_error)
+{
+ if (adsp_error > ADSP_ERR_MAX)
+ return adsp_err_code_info[ADSP_ERR_MAX].lnx_err_code;
+ else
+ return adsp_err_code_info[adsp_error].lnx_err_code;
+}
+
+static inline char *adsp_err_get_err_str(u32 adsp_error)
+{
+ if (adsp_error > ADSP_ERR_MAX)
+ return adsp_err_code_info[ADSP_ERR_MAX].adsp_err_str;
+ else
+ return adsp_err_code_info[adsp_error].adsp_err_str;
+}
+
+#endif /* __Q6DSP_COMMON_H__ */
--
2.15.0
^ permalink raw reply related
* [RESEND PATCH v2 02/15] soc: qcom: add support to APR bus driver
From: srinivas.kandagatla at linaro.org @ 2017-12-14 17:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171214173402.19074-1-srinivas.kandagatla@linaro.org>
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch adds support toi APR bus (Asynchronous Packet Router) driver.
ARP driver is made as a bus driver so that the apr devices can added removed
more dynamically depending on the state of the services on the dsp.
APR is used for communication between application processor and QDSP to
use services on QDSP like Audio and others.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
drivers/soc/qcom/Kconfig | 8 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/apr.c | 395 ++++++++++++++++++++++++++++++++++++++++
include/linux/mod_devicetable.h | 13 ++
include/linux/soc/qcom/apr.h | 174 ++++++++++++++++++
5 files changed, 591 insertions(+)
create mode 100644 drivers/soc/qcom/apr.c
create mode 100644 include/linux/soc/qcom/apr.h
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index b81374bb6713..1daa39925dd4 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -97,4 +97,12 @@ config QCOM_WCNSS_CTRL
Client driver for the WCNSS_CTRL SMD channel, used to download nv
firmware to a newly booted WCNSS chip.
+config QCOM_APR
+ tristate "Qualcomm APR Bus (Asynchronous Packet Router)"
+ depends on (RPMSG_QCOM_SMD || RPMSG_QCOM_GLINK_RPM)
+ help
+ Enable APR IPC protocol support between
+ application processor and QDSP6. APR is
+ used by audio driver to configure QDSP6
+ ASM, ADM and AFE modules.
endmenu
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 40c56f67e94a..9daba7e6d20f 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
obj-$(CONFIG_QCOM_SMSM) += smsm.o
obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
+obj-$(CONFIG_QCOM_APR) += apr.o
diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
new file mode 100644
index 000000000000..c6f3aa7a375b
--- /dev/null
+++ b/drivers/soc/qcom/apr.c
@@ -0,0 +1,395 @@
+/* SPDX-License-Identifier: GPL-2.0
+* Copyright (c) 2011-2016, The Linux Foundation
+* Copyright (c) 2017, Linaro Limited
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+#include <linux/soc/qcom/apr.h>
+#include <linux/rpmsg.h>
+#include <linux/of.h>
+
+struct apr_data {
+ int (*get_data_src)(struct apr_hdr *hdr);
+ int dest_id;
+};
+
+struct apr {
+ struct rpmsg_endpoint *ch;
+ struct device *dev;
+ spinlock_t svcs_lock;
+ struct list_head svcs;
+ int dest_id;
+ const struct apr_data *data;
+};
+
+/* Static CORE service on the ADSP */
+static const struct apr_device_id core_svc_device_id =
+ ADSP_AUDIO_APR_DEV("CORE", APR_SVC_ADSP_CORE);
+
+/**
+ * apr_send_pkt() - Send a apr message from apr device
+ *
+ * @adev: Pointer to previously registered apr device.
+ * @buf: Pointer to buffer to send
+ *
+ * Return: Will be an negative on packet size on success.
+ */
+int apr_send_pkt(struct apr_device *adev, uint32_t *buf)
+{
+ struct apr *apr = dev_get_drvdata(adev->dev.parent);
+ struct apr_hdr *hdr;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&adev->lock, flags);
+
+ hdr = (struct apr_hdr *)buf;
+ hdr->src_domain = APR_DOMAIN_APPS;
+ hdr->src_svc = adev->svc_id;
+ hdr->dest_domain = adev->domain_id;
+ hdr->dest_svc = adev->svc_id;
+
+ ret = rpmsg_send(apr->ch, buf, hdr->pkt_size);
+ if (ret) {
+ dev_err(&adev->dev, "Unable to send APR pkt %d\n",
+ hdr->pkt_size);
+ } else {
+ ret = hdr->pkt_size;
+ }
+
+ spin_unlock_irqrestore(&adev->lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(apr_send_pkt);
+
+static void apr_dev_release(struct device *dev)
+{
+ struct apr_device *adev = to_apr_device(dev);
+
+ kfree(adev);
+}
+
+static int qcom_rpmsg_q6_callback(struct rpmsg_device *rpdev, void *buf,
+ int len, void *priv, u32 addr)
+{
+ struct apr *apr = dev_get_drvdata(&rpdev->dev);
+ struct apr_client_data data;
+ struct apr_device *p, *c_svc = NULL;
+ struct apr_driver *adrv = NULL;
+ struct apr_hdr *hdr;
+ uint16_t hdr_size;
+ uint16_t msg_type;
+ uint16_t ver;
+ uint16_t src;
+ uint16_t svc;
+
+ if (!buf || len <= APR_HDR_SIZE) {
+ dev_err(apr->dev, "APR: Improper apr pkt received:%p %d\n",
+ buf, len);
+ return -EINVAL;
+ }
+
+ hdr = buf;
+ ver = APR_HDR_FIELD_VER(hdr->hdr_field);
+ if (ver > APR_PKT_VER + 1)
+ return -EINVAL;
+
+ hdr_size = APR_HDR_FIELD_SIZE_BYTES(hdr->hdr_field);
+ if (hdr_size < APR_HDR_SIZE) {
+ dev_err(apr->dev, "APR: Wrong hdr size:%d\n", hdr_size);
+ return -EINVAL;
+ }
+
+ if (hdr->pkt_size < APR_HDR_SIZE) {
+ dev_err(apr->dev, "APR: Wrong paket size\n");
+ return -EINVAL;
+ }
+
+ msg_type = APR_HDR_FIELD_MT(hdr->hdr_field);
+ if (msg_type >= APR_MSG_TYPE_MAX && msg_type != APR_BASIC_RSP_RESULT) {
+ dev_err(apr->dev, "APR: Wrong message type: %d\n", msg_type);
+ return -EINVAL;
+ }
+
+ if (hdr->src_domain >= APR_DOMAIN_MAX ||
+ hdr->dest_domain >= APR_DOMAIN_MAX ||
+ hdr->src_svc >= APR_SVC_MAX ||
+ hdr->dest_svc >= APR_SVC_MAX) {
+ dev_err(apr->dev, "APR: Wrong APR header\n");
+ return -EINVAL;
+ }
+
+ svc = hdr->dest_svc;
+ src = apr->data->get_data_src(hdr);
+ if (src == APR_DEST_MAX)
+ return -EINVAL;
+
+ spin_lock(&apr->svcs_lock);
+ list_for_each_entry(p, &apr->svcs, node) {
+ if (svc == p->svc_id) {
+ c_svc = p;
+ if (c_svc->dev.driver)
+ adrv = to_apr_driver(c_svc->dev.driver);
+ break;
+ }
+ }
+ spin_unlock(&apr->svcs_lock);
+
+ if (!adrv) {
+ dev_err(apr->dev, "APR: service is not registered\n");
+ return -EINVAL;
+ }
+
+ data.payload_size = hdr->pkt_size - hdr_size;
+ data.opcode = hdr->opcode;
+ data.src = src;
+ data.src_port = hdr->src_port;
+ data.dest_port = hdr->dest_port;
+ data.token = hdr->token;
+ data.msg_type = msg_type;
+
+ if (data.payload_size > 0)
+ data.payload = (char *)hdr + hdr_size;
+
+ adrv->callback(c_svc, &data);
+
+ return 0;
+}
+
+static const struct apr_device_id *apr_match(const struct apr_device_id *id,
+ const struct apr_device *adev)
+{
+ while (id->domain_id != 0 || id->svc_id != 0) {
+ if (id->domain_id == adev->domain_id &&
+ id->svc_id == adev->svc_id &&
+ id->client_id == adev->client_id)
+ return id;
+ id++;
+ }
+ return NULL;
+}
+
+static int apr_device_match(struct device *dev, struct device_driver *drv)
+{
+ struct apr_device *adev = to_apr_device(dev);
+ struct apr_driver *adrv = to_apr_driver(drv);
+
+ return !!apr_match(adrv->id_table, adev);
+}
+
+static int apr_device_probe(struct device *dev)
+{
+ struct apr_device *adev;
+ struct apr_driver *adrv;
+ int ret = 0;
+
+ adev = to_apr_device(dev);
+ adrv = to_apr_driver(dev->driver);
+
+ ret = adrv->probe(adev);
+
+ return ret;
+}
+
+static int apr_device_remove(struct device *dev)
+{
+ struct apr_device *adev = to_apr_device(dev);
+ struct apr_driver *adrv;
+ struct apr *apr = dev_get_drvdata(adev->dev.parent);
+
+ if (dev->driver) {
+ adrv = to_apr_driver(dev->driver);
+ if (adrv->remove)
+ adrv->remove(adev);
+ spin_lock(&apr->svcs_lock);
+ list_del(&adev->node);
+ spin_unlock(&apr->svcs_lock);
+ }
+
+ return 0;
+}
+
+struct bus_type aprbus_type = {
+ .name = "aprbus",
+ .match = apr_device_match,
+ .probe = apr_device_probe,
+ .remove = apr_device_remove,
+};
+EXPORT_SYMBOL_GPL(aprbus_type);
+
+/**
+ * apr_add_device() - Add a new apr device
+ *
+ * @dev: Pointer to apr device.
+ * @id: Pointer to apr device id to add.
+ *
+ * Return: Will be an negative on error or a zero on success.
+ */
+int apr_add_device(struct device *dev, const struct apr_device_id *id)
+{
+ struct apr *apr = dev_get_drvdata(dev);
+ struct apr_device *adev = NULL;
+
+ if (!apr)
+ return -EINVAL;
+
+ adev = kzalloc(sizeof(*adev), GFP_KERNEL);
+ if (!adev)
+ return -ENOMEM;
+
+ spin_lock_init(&adev->lock);
+
+ adev->svc_id = id->svc_id;
+ adev->dest_id = apr->dest_id;
+ adev->client_id = id->client_id;
+ adev->domain_id = id->domain_id;
+ adev->version = id->svc_version;
+
+ adev->dev.bus = &aprbus_type;
+ adev->dev.parent = dev;
+ adev->dev.release = apr_dev_release;
+ adev->dev.driver = NULL;
+
+ dev_set_name(&adev->dev, "apr:%s:%x:%x:%x", id->name, id->domain_id,
+ id->svc_id, id->client_id);
+
+ spin_lock(&apr->svcs_lock);
+ list_add_tail(&adev->node, &apr->svcs);
+ spin_unlock(&apr->svcs_lock);
+
+ return device_register(&adev->dev);
+}
+EXPORT_SYMBOL_GPL(apr_add_device);
+
+static int qcom_rpmsg_q6_probe(struct rpmsg_device *rpdev)
+{
+ struct device *dev = &rpdev->dev;
+ struct apr *apr;
+
+ apr = devm_kzalloc(dev, sizeof(*apr), GFP_KERNEL);
+ if (!apr)
+ return -ENOMEM;
+
+ apr->data = of_device_get_match_data(dev);
+ if (!apr->data)
+ return -ENODEV;
+
+ apr->dest_id = apr->data->dest_id;
+ dev_set_drvdata(dev, apr);
+ apr->ch = rpdev->ept;
+ apr->dev = dev;
+ INIT_LIST_HEAD(&apr->svcs);
+
+ /* register core service */
+ apr_add_device(dev, &core_svc_device_id);
+
+ return 0;
+}
+
+static int apr_remove_device(struct device *dev, void *null)
+{
+ struct apr_device *adev = to_apr_device(dev);
+
+ device_unregister(&adev->dev);
+
+ return 0;
+}
+
+static void qcom_rpmsg_q6_remove(struct rpmsg_device *rpdev)
+{
+ device_for_each_child(&rpdev->dev, NULL, apr_remove_device);
+}
+
+static int apr_v2_get_data_src(struct apr_hdr *hdr)
+{
+ if (hdr->src_domain == APR_DOMAIN_MODEM)
+ return APR_DEST_MODEM;
+ else if (hdr->src_domain == APR_DOMAIN_ADSP)
+ return APR_DEST_QDSP6;
+
+ return APR_DEST_MAX;
+}
+
+/*
+ * __apr_driver_register() - Client driver registration with aprbus
+ *
+ * @drv:Client driver to be associated with client-device.
+ * @owner: owning module/driver
+ *
+ * This API will register the client driver with the aprbus
+ * It is called from the driver's module-init function.
+ */
+int __apr_driver_register(struct apr_driver *drv, struct module *owner)
+{
+ /* ID table is mandatory to match the devices to probe */
+ if (!drv->id_table)
+ return -EINVAL;
+
+ drv->driver.bus = &aprbus_type;
+ drv->driver.owner = owner;
+
+ return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(__apr_driver_register);
+
+/*
+ * apr_driver_unregister() - Undo effect of apr_driver_register
+ *
+ * @drv: Client driver to be unregistered
+ */
+void apr_driver_unregister(struct apr_driver *drv)
+{
+ driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(apr_driver_unregister);
+
+static const struct apr_data apr_v2_data = {
+ .get_data_src = apr_v2_get_data_src,
+ .dest_id = APR_DEST_QDSP6,
+};
+
+static const struct of_device_id qcom_rpmsg_q6_of_match[] = {
+ { .compatible = "qcom,apr-msm8996", .data = &apr_v2_data},
+ {}
+};
+
+static struct rpmsg_driver qcom_rpmsg_q6_driver = {
+ .probe = qcom_rpmsg_q6_probe,
+ .remove = qcom_rpmsg_q6_remove,
+ .callback = qcom_rpmsg_q6_callback,
+ .drv = {
+ .name = "qcom_rpmsg_q6",
+ .owner = THIS_MODULE,
+ .of_match_table = qcom_rpmsg_q6_of_match,
+ },
+};
+
+static int __init apr_init(void)
+{
+ int ret;
+
+ ret = register_rpmsg_driver(&qcom_rpmsg_q6_driver);
+ if (!ret)
+ return bus_register(&aprbus_type);
+
+ return ret;
+}
+
+static void __exit apr_exit(void)
+{
+ bus_unregister(&aprbus_type);
+ unregister_rpmsg_driver(&qcom_rpmsg_q6_driver);
+}
+
+subsys_initcall(apr_init);
+module_exit(apr_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Qualcomm APR Bus");
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index abb6dc2ebbf8..068d215c3be6 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -452,6 +452,19 @@ struct spi_device_id {
kernel_ulong_t driver_data; /* Data private to the driver */
};
+
+#define APR_NAME_SIZE 32
+#define APR_MODULE_PREFIX "apr:"
+
+struct apr_device_id {
+ char name[APR_NAME_SIZE];
+ __u32 domain_id;
+ __u32 svc_id;
+ __u32 client_id;
+ __u32 svc_version;
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
#define SPMI_NAME_SIZE 32
#define SPMI_MODULE_PREFIX "spmi:"
diff --git a/include/linux/soc/qcom/apr.h b/include/linux/soc/qcom/apr.h
new file mode 100644
index 000000000000..8620289c34ab
--- /dev/null
+++ b/include/linux/soc/qcom/apr.h
@@ -0,0 +1,174 @@
+/* SPDX-License-Identifier: GPL-2.0
+* Copyright (c) 2011-2016, The Linux Foundation
+* Copyright (c) 2017, Linaro Limited
+*/
+
+#ifndef __APR_H_
+#define __APR_H_
+
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+/* APR Client IDs */
+#define APR_CLIENT_AUDIO 0x0
+#define APR_CLIENT_VOICE 0x1
+#define APR_CLIENT_MAX 0x2
+
+#define APR_DL_SMD 0
+#define APR_DL_MAX 1
+
+#define APR_DEST_MODEM 0
+#define APR_DEST_QDSP6 1
+#define APR_DEST_MAX 2
+#define APR_MAX_BUF 8192
+
+#define APR_HDR_LEN(hdr_len) ((hdr_len)/4)
+#define APR_PKT_SIZE(hdr_len, payload_len) ((hdr_len) + (payload_len))
+#define APR_HDR_FIELD(msg_type, hdr_len, ver)\
+ (((msg_type & 0x3) << 8) | ((hdr_len & 0xF) << 4) | (ver & 0xF))
+
+#define APR_HDR_SIZE sizeof(struct apr_hdr)
+#define APR_SEQ_CMD_HDR_FIELD APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD, \
+ APR_HDR_LEN(APR_HDR_SIZE), \
+ APR_PKT_VER)
+
+/* Version */
+#define APR_PKT_VER 0x0
+
+/* Command and Response Types */
+#define APR_MSG_TYPE_EVENT 0x0
+#define APR_MSG_TYPE_CMD_RSP 0x1
+#define APR_MSG_TYPE_SEQ_CMD 0x2
+#define APR_MSG_TYPE_NSEQ_CMD 0x3
+#define APR_MSG_TYPE_MAX 0x04
+
+/* APR Basic Response Message */
+#define APR_BASIC_RSP_RESULT 0x000110E8
+#define APR_RSP_ACCEPTED 0x000100BE
+
+/* Domain IDs */
+#define APR_DOMAIN_SIM 0x1
+#define APR_DOMAIN_PC 0x2
+#define APR_DOMAIN_MODEM 0x3
+#define APR_DOMAIN_ADSP 0x4
+#define APR_DOMAIN_APPS 0x5
+#define APR_DOMAIN_MAX 0x6
+
+/* ADSP service IDs */
+#define APR_SVC_TEST_CLIENT 0x2
+#define APR_SVC_ADSP_CORE 0x3
+#define APR_SVC_AFE 0x4
+#define APR_SVC_VSM 0x5
+#define APR_SVC_VPM 0x6
+#define APR_SVC_ASM 0x7
+#define APR_SVC_ADM 0x8
+#define APR_SVC_ADSP_MVM 0x09
+#define APR_SVC_ADSP_CVS 0x0A
+#define APR_SVC_ADSP_CVP 0x0B
+#define APR_SVC_USM 0x0C
+#define APR_SVC_LSM 0x0D
+#define APR_SVC_VIDC 0x16
+#define APR_SVC_MAX 0x17
+
+/* Modem Service IDs */
+#define APR_SVC_MVS 0x3
+#define APR_SVC_MVM 0x4
+#define APR_SVC_CVS 0x5
+#define APR_SVC_CVP 0x6
+#define APR_SVC_SRD 0x7
+
+/* APR Port IDs */
+#define APR_MAX_PORTS 0x80
+#define APR_NAME_MAX 0x40
+#define RESET_EVENTS 0x000130D7
+
+/* hdr field Ver [0:3], Size [4:7], Message type [8:10] */
+#define APR_HDR_FIELD_VER(h) (h & 0x000F)
+#define APR_HDR_FIELD_SIZE(h) ((h & 0x00F0) >> 4)
+#define APR_HDR_FIELD_SIZE_BYTES(h) (((h & 0x00F0) >> 4) * 4)
+#define APR_HDR_FIELD_MT(h) ((h & 0x0300) >> 8)
+
+struct apr_hdr {
+ uint16_t hdr_field;
+ uint16_t pkt_size;
+ uint8_t src_svc;
+ uint8_t src_domain;
+ uint16_t src_port;
+ uint8_t dest_svc;
+ uint8_t dest_domain;
+ uint16_t dest_port;
+ uint32_t token;
+ uint32_t opcode;
+};
+
+struct apr_client_data {
+ uint16_t payload_size;
+ uint16_t hdr_len;
+ uint16_t msg_type;
+ uint16_t src;
+ uint16_t dest_svc;
+ uint16_t src_port;
+ uint16_t dest_port;
+ uint32_t token;
+ uint32_t opcode;
+ void *payload;
+};
+
+#define ADSP_AUDIO_APR_DEV(name, id) \
+ {name, APR_DOMAIN_ADSP, id, APR_CLIENT_AUDIO}
+
+/* Bits 0 to 15 -- Minor version, Bits 16 to 31 -- Major version */
+
+#define APR_SVC_MAJOR_VERSION(v) ((v >> 16) & 0xFF)
+#define APR_SVC_MINOR_VERSION(v) (v & 0xFF)
+
+struct apr_device {
+ struct device dev;
+ uint16_t svc_id;
+ uint16_t dest_id;
+ uint16_t client_id;
+ uint16_t domain_id;
+ uint16_t version;
+
+ spinlock_t lock;
+ struct list_head node;
+};
+
+
+#define to_apr_device(d) container_of(d, struct apr_device, dev)
+
+struct apr_driver {
+ int (*probe)(struct apr_device *sl);
+ int (*remove)(struct apr_device *sl);
+ int (*callback)(struct apr_device *a, struct apr_client_data *d);
+ struct device_driver driver;
+ const struct apr_device_id *id_table;
+};
+
+#define to_apr_driver(d) container_of(d, struct apr_driver, driver)
+
+/*
+ * use a macro to avoid include chaining to get THIS_MODULE
+ */
+#define apr_driver_register(drv) __apr_driver_register(drv, THIS_MODULE)
+
+int __apr_driver_register(struct apr_driver *drv, struct module *owner);
+void apr_driver_unregister(struct apr_driver *drv);
+int apr_add_device(struct device *dev, const struct apr_device_id *id);
+
+/**
+ * module_apr_driver() - Helper macro for registering a aprbus driver
+ * @__aprbus_driver: aprbus_driver struct
+ *
+ * Helper macro for aprbus drivers which do not do anything special in
+ * module init/exit. This eliminates a lot of boilerplate. Each module
+ * may only use this macro once, and calling it replaces module_init()
+ * and module_exit()
+ */
+#define module_apr_driver(__apr_driver) \
+ module_driver(__apr_driver, apr_driver_register, \
+ apr_driver_unregister)
+
+int apr_send_pkt(struct apr_device *adev, uint32_t *buf);
+
+#endif /* __APR_H_ */
--
2.15.0
^ permalink raw reply related
* [RESEND PATCH v2 01/15] dt-bindings: soc: qcom: Add bindings for APR bus
From: srinivas.kandagatla at linaro.org @ 2017-12-14 17:33 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171214173402.19074-1-srinivas.kandagatla@linaro.org>
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patch add dt bindings for Qualcomm APR bus driver
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
.../devicetree/bindings/soc/qcom/qcom,apr.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
new file mode 100644
index 000000000000..4e93213ae98d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
@@ -0,0 +1,28 @@
+Qualcomm APR (Asynchronous Packet Router) binding
+
+This binding describes the Qualcomm APR. APR is a IPC protocol for
+communication between Application processor and QDSP. APR is mainly
+used for audio/voice services on the QDSP.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,apr-<SOC-NAME>" example: "qcom,apr-msm8996"
+
+
+- qcom,smd-channel:
+ Usage: required
+ Value type: <string>
+ Definition: standard SMD property specifying the SMD channel used for
+ communication with the APR on QDSP.
+ Should be "apr_audio_svc".
+ Described in soc/qcom/qcom,smd.txt
+
+= EXAMPLE
+The following example represents a QDSP based sound card on a MSM8996 device
+which uses apr as communication between Apps and QDSP.
+
+ apr {
+ compatible = "qcom,apr-msm8996";
+ qcom,smd-channels = "apr_audio_svc";
+ };
--
2.15.0
^ permalink raw reply related
* [RESEND PATCH v2 00/15] ASoC: qcom: Add support to QDSP6 based audio
From: srinivas.kandagatla at linaro.org @ 2017-12-14 17:33 UTC (permalink / raw)
To: linux-arm-kernel
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
This patchset aims to provide a very basic version of QCOM DSP based
audio support which is available in downstream andriod kernels.
This patchset only support Digital audio based for HDMI-RX and will
add support to other features as we move on.
QDSP has both static and dynamic modules. static modules like AFE
(Audio FrontEnd), ADM (Audio Device Manager), ASM(Audio Stream Manager)
and CORE to provide this audio services.
All these services use APR (Asynchronous Packet Router) protocol
via smd/glink transport to communicate with Application processor.
More details on each module is availble in there respective patch.
This patchset is tested on DB820c, with HDMI audio playback
on top of mainline, also tested slimbus analog audio using wcd9355
with an additional small patch.
Here is block diagram to give a quick overview of the components
+---------+ +---------+ +---------+
| q6asm | |q6routing| | q6afe |
| fedai | <------> | mixers | <-----> | bedai |
+---------+ +---------+ +---------+
^ ^ ^
| | |
| +------------------+----------------+ |
| | | | |
v v v v v
+---------+ +---------+ +---------+
| q6ASM | | q6ADM | | q6AFE |
+---------+ +---------+ +---------+
^ ^ ^ ^
| | | CPU Side |
------+---------------------+-------------------+--------
| | |
| |APR(smd/glink) |
| | |
| +------------------+----------------+ |
| | | | |
+-----+--+-----------------------------------+--+-------
| | | | | QDSP Side |
v v v v v v
+---------+ +---------+ +---------+
| ASM | <------> | ADM | <-----> | AFE |
+---------+ +---------+ +---------+
^
|
+-------------------+
|
---------------------------+--------------------------
| Audio I/O |
v v
+--------------------------------------------------+
| Audio devices |
| CODEC | HDMI-TX | PCM | SLIMBUS | I2S |MI2S |...|
| |
+--------------------------------------------------+
Changes since RFC:
- Converted APR driver to proper bus driver
- Added API version info to apr devices
- Added q6core driver.
- Fixed various issues spotted by Banajit and Kasam.
- Added kernel doc to exported symbols.
- renamed qdsp6v2 to qdsp6 as api version info can be
used from apr device.
- removed unnecessary dt bindings for apr devices.
Srinivas Kandagatla (15):
dt-bindings: soc: qcom: Add bindings for APR bus
soc: qcom: add support to APR bus driver
ASoC: qcom: qdsp6: Add common qdsp6 helper functions
ASoC: qcom: qdsp6: Add support to Q6AFE
ASoC: qcom: qdsp6: Add support to Q6ADM
ASoC: qcom: qdsp6: Add support to Q6ASM
ASoC: qcom: q6asm: Add support to memory map and unmap
ASoC: qcom: q6asm: add support to audio stream apis
ASoC: qcom: qdsp6: Add support to Q6CORE
ASoC: qcom: qdsp6: Add support to q6routing driver
ASoC: qcom: qdsp6: Add support to q6afe dai driver
ASoC: qcom: qdsp6: Add support to q6asm dai driver
dt-bindings: sound: qcom: Add devicetree bindings for apq8096
ASoC: qcom: apq8096: Add db820c machine driver
arm64: dts: msm8996: db820c: Add sound card support
.../devicetree/bindings/soc/qcom/qcom,apr.txt | 28 +
.../devicetree/bindings/sound/qcom,apq8096.txt | 22 +
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 5 +
arch/arm64/boot/dts/qcom/msm8996.dtsi | 33 +
drivers/soc/qcom/Kconfig | 8 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/apr.c | 395 +++++++
include/linux/mod_devicetable.h | 13 +
include/linux/soc/qcom/apr.h | 174 +++
sound/soc/qcom/Kconfig | 51 +
sound/soc/qcom/Makefile | 5 +
sound/soc/qcom/apq8096.c | 124 +++
sound/soc/qcom/qdsp6/Makefile | 7 +
sound/soc/qcom/qdsp6/common.h | 225 ++++
sound/soc/qcom/qdsp6/q6adm.c | 602 +++++++++++
sound/soc/qcom/qdsp6/q6adm.h | 24 +
sound/soc/qcom/qdsp6/q6afe-dai.c | 241 +++++
sound/soc/qcom/qdsp6/q6afe.c | 503 +++++++++
sound/soc/qcom/qdsp6/q6afe.h | 30 +
sound/soc/qcom/qdsp6/q6asm-dai.c | 534 ++++++++++
sound/soc/qcom/qdsp6/q6asm.c | 1119 ++++++++++++++++++++
sound/soc/qcom/qdsp6/q6asm.h | 61 ++
sound/soc/qcom/qdsp6/q6core.c | 227 ++++
sound/soc/qcom/qdsp6/q6routing.c | 386 +++++++
sound/soc/qcom/qdsp6/q6routing.h | 9 +
25 files changed, 4827 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
create mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8096.txt
create mode 100644 drivers/soc/qcom/apr.c
create mode 100644 include/linux/soc/qcom/apr.h
create mode 100644 sound/soc/qcom/apq8096.c
create mode 100644 sound/soc/qcom/qdsp6/Makefile
create mode 100644 sound/soc/qcom/qdsp6/common.h
create mode 100644 sound/soc/qcom/qdsp6/q6adm.c
create mode 100644 sound/soc/qcom/qdsp6/q6adm.h
create mode 100644 sound/soc/qcom/qdsp6/q6afe-dai.c
create mode 100644 sound/soc/qcom/qdsp6/q6afe.c
create mode 100644 sound/soc/qcom/qdsp6/q6afe.h
create mode 100644 sound/soc/qcom/qdsp6/q6asm-dai.c
create mode 100644 sound/soc/qcom/qdsp6/q6asm.c
create mode 100644 sound/soc/qcom/qdsp6/q6asm.h
create mode 100644 sound/soc/qcom/qdsp6/q6core.c
create mode 100644 sound/soc/qcom/qdsp6/q6routing.c
create mode 100644 sound/soc/qcom/qdsp6/q6routing.h
--
2.15.0
^ permalink raw reply
* [PATCH] media: v4l: xilinx: Use SPDX-License-Identifier
From: Joe Perches @ 2017-12-14 17:26 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171214150527.00dca6cc@vento.lan>
On Thu, 2017-12-14 at 15:05 -0200, Mauro Carvalho Chehab wrote:
> Em Fri, 8 Dec 2017 18:05:37 +0530
> Dhaval Shah <dhaval23031987@gmail.com> escreveu:
>
> > SPDX-License-Identifier is used for the Xilinx Video IP and
> > related drivers.
> >
> > Signed-off-by: Dhaval Shah <dhaval23031987@gmail.com>
>
> Hi Dhaval,
>
> You're not listed as one of the Xilinx driver maintainers. I'm afraid that,
> without their explicit acks, sent to the ML, I can't accept a patch
> touching at the driver's license tags.
And even a maintainer may not have the sole right
to modify a license.
^ permalink raw reply
* [PATCH 2/2] ARM: dts: imx6sx: Fix PCI non-prefetchable memory range
From: Fabio Estevam @ 2017-12-14 17:14 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1513271667-1960-1-git-send-email-festevam@gmail.com>
From: Fabio Estevam <fabio.estevam@nxp.com>
The third cell of the PCI non-prefetchable memory range should be
0x08000000, so change it accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm/boot/dts/imx6sx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 40c6738c..f41e389 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -1313,7 +1313,7 @@
device_type = "pci";
bus-range = <0x00 0xff>;
ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */
- 0x82000000 0 0x01000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
+ 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
--
2.7.4
^ permalink raw reply related
* [PATCH 1/2] ARM: dts: imx6sx-sdb: Disable PCI support
From: Fabio Estevam @ 2017-12-14 17:14 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@nxp.com>
When I added PCI support for this board I was testing with mainline U-Boot,
which has PCI support and enables the i.mx6sx PCI power domain.
When running on a U-Boot without PCI support, such as the one provided
by NXP a kernel hang is observed.
Better to disable the pci node for now, until the i.MX6SX PCI power domain
is properly implemented in the kernel.
Reported-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm/boot/dts/imx6sx-sdb.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index d57a41c..bb0fe35 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -215,7 +215,8 @@
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
vpcie-supply = <®_pcie_gpio>;
- status = "okay";
+ /* Keep it disable until mx6sx pci domain is supported */
+ status = "disabled";
};
&lcdif1 {
--
2.7.4
^ permalink raw reply related
* [PATCH] media: v4l: xilinx: Use SPDX-License-Identifier
From: Mauro Carvalho Chehab @ 2017-12-14 17:05 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171208123537.18718-1-dhaval23031987@gmail.com>
Em Fri, 8 Dec 2017 18:05:37 +0530
Dhaval Shah <dhaval23031987@gmail.com> escreveu:
> SPDX-License-Identifier is used for the Xilinx Video IP and
> related drivers.
>
> Signed-off-by: Dhaval Shah <dhaval23031987@gmail.com>
Hi Dhaval,
You're not listed as one of the Xilinx driver maintainers. I'm afraid that,
without their explicit acks, sent to the ML, I can't accept a patch
touching at the driver's license tags.
Sorry,
Mauro
^ permalink raw reply
* [PATCH v2 4/4] iommu/arm-smmu-v3: Support 52-bit virtual address
From: Robin Murphy @ 2017-12-14 16:58 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1512038236.git.robin.murphy@arm.com>
Stage 1 input addresses are effectively 64-bit in SMMUv3 anyway, so
really all that's involved is letting io-pgtable know the appropriate
upper bound for T0SZ.
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
---
v2: No change
drivers/iommu/arm-smmu-v3.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index c9c4e6132e27..7059a0805bd1 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -102,6 +102,7 @@
#define IDR5_OAS_44_BIT (4 << IDR5_OAS_SHIFT)
#define IDR5_OAS_48_BIT (5 << IDR5_OAS_SHIFT)
#define IDR5_OAS_52_BIT (6 << IDR5_OAS_SHIFT)
+#define IDR5_VAX (1 << 10)
#define ARM_SMMU_CR0 0x20
#define CR0_CMDQEN (1 << 3)
@@ -604,6 +605,7 @@ struct arm_smmu_device {
#define ARM_SMMU_FEAT_STALLS (1 << 11)
#define ARM_SMMU_FEAT_HYP (1 << 12)
#define ARM_SMMU_FEAT_STALL_FORCE (1 << 13)
+#define ARM_SMMU_FEAT_VAX (1 << 14)
u32 features;
#define ARM_SMMU_OPT_SKIP_PREFETCH (1 << 0)
@@ -1656,6 +1658,8 @@ static int arm_smmu_domain_finalise(struct iommu_domain *domain)
switch (smmu_domain->stage) {
case ARM_SMMU_DOMAIN_S1:
ias = VA_BITS;
+ if (VA_BITS > 48 && !(smmu->features & ARM_SMMU_FEAT_VAX))
+ ias = 48;
oas = smmu->ias;
fmt = ARM_64_LPAE_S1;
finalise_stage_fn = arm_smmu_domain_finalise_s1;
@@ -2694,6 +2698,10 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
if (reg & IDR5_GRAN4K)
smmu->pgsize_bitmap |= SZ_4K | SZ_2M | SZ_1G;
+ /* Input address size */
+ if (reg & IDR5_VAX)
+ smmu->features |= ARM_SMMU_FEAT_VAX;
+
/* Output address size */
switch (reg & IDR5_OAS_MASK << IDR5_OAS_SHIFT) {
case IDR5_OAS_32_BIT:
--
2.13.4.dirty
^ permalink raw reply related
* [PATCH v2 3/4] iommu/arm-smmu-v3: Support 52-bit physical address
From: Robin Murphy @ 2017-12-14 16:58 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1512038236.git.robin.murphy@arm.com>
Implement SMMUv3.1 support for 52-bit physical addresses. Since a 52-bit
OAS implies 64KB translation granule support, permitting level 1 block
entries there is simple, and the rest is just extending address fields.
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
---
v2: No change
drivers/iommu/arm-smmu-v3.c | 35 ++++++++++++++++++++---------------
1 file changed, 20 insertions(+), 15 deletions(-)
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index 52cad776b31b..c9c4e6132e27 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -101,6 +101,7 @@
#define IDR5_OAS_42_BIT (3 << IDR5_OAS_SHIFT)
#define IDR5_OAS_44_BIT (4 << IDR5_OAS_SHIFT)
#define IDR5_OAS_48_BIT (5 << IDR5_OAS_SHIFT)
+#define IDR5_OAS_52_BIT (6 << IDR5_OAS_SHIFT)
#define ARM_SMMU_CR0 0x20
#define CR0_CMDQEN (1 << 3)
@@ -159,7 +160,7 @@
#define ARM_SMMU_STRTAB_BASE 0x80
#define STRTAB_BASE_RA (1UL << 62)
-#define STRTAB_BASE_ADDR_MASK GENMASK_ULL(47, 6)
+#define STRTAB_BASE_ADDR_MASK GENMASK_ULL(51, 6)
#define ARM_SMMU_STRTAB_BASE_CFG 0x88
#define STRTAB_BASE_CFG_LOG2SIZE_SHIFT 0
@@ -190,7 +191,7 @@
#define ARM_SMMU_PRIQ_IRQ_CFG2 0xdc
/* Common MSI config fields */
-#define MSI_CFG0_ADDR_MASK GENMASK_ULL(47, 2)
+#define MSI_CFG0_ADDR_MASK GENMASK_ULL(51, 2)
#define MSI_CFG2_SH_SHIFT 4
#define MSI_CFG2_SH_NSH (0UL << MSI_CFG2_SH_SHIFT)
#define MSI_CFG2_SH_OSH (2UL << MSI_CFG2_SH_SHIFT)
@@ -206,7 +207,7 @@
Q_IDX(q, p) * (q)->ent_dwords)
#define Q_BASE_RWA (1UL << 62)
-#define Q_BASE_ADDR_MASK GENMASK_ULL(47, 5)
+#define Q_BASE_ADDR_MASK GENMASK_ULL(51, 5)
#define Q_BASE_LOG2SIZE_SHIFT 0
#define Q_BASE_LOG2SIZE_MASK 0x1fUL
@@ -223,7 +224,7 @@
#define STRTAB_L1_DESC_DWORDS 1
#define STRTAB_L1_DESC_SPAN_SHIFT 0
#define STRTAB_L1_DESC_SPAN_MASK 0x1fUL
-#define STRTAB_L1_DESC_L2PTR_MASK GENMASK_ULL(47, 6)
+#define STRTAB_L1_DESC_L2PTR_MASK GENMASK_ULL(51, 6)
#define STRTAB_STE_DWORDS 8
#define STRTAB_STE_0_V (1UL << 0)
@@ -236,7 +237,7 @@
#define STRTAB_STE_0_S1FMT_SHIFT 4
#define STRTAB_STE_0_S1FMT_LINEAR (0UL << STRTAB_STE_0_S1FMT_SHIFT)
-#define STRTAB_STE_0_S1CTXPTR_MASK GENMASK_ULL(47, 6)
+#define STRTAB_STE_0_S1CTXPTR_MASK GENMASK_ULL(51, 6)
#define STRTAB_STE_0_S1CDMAX_SHIFT 59
#define STRTAB_STE_0_S1CDMAX_MASK 0x1fUL
@@ -274,7 +275,7 @@
#define STRTAB_STE_2_S2PTW (1UL << 54)
#define STRTAB_STE_2_S2R (1UL << 58)
-#define STRTAB_STE_3_S2TTB_MASK GENMASK_ULL(47, 4)
+#define STRTAB_STE_3_S2TTB_MASK GENMASK_ULL(51, 4)
/* Context descriptor (stage-1 only) */
#define CTXDESC_CD_DWORDS 8
@@ -320,7 +321,7 @@
#define CTXDESC_CD_0_ASID_SHIFT 48
#define CTXDESC_CD_0_ASID_MASK 0xffffUL
-#define CTXDESC_CD_1_TTB0_MASK GENMASK_ULL(47, 4)
+#define CTXDESC_CD_1_TTB0_MASK GENMASK_ULL(51, 4)
#define CTXDESC_CD_3_MAIR_SHIFT 0
@@ -357,7 +358,7 @@
#define CMDQ_TLBI_0_ASID_SHIFT 48
#define CMDQ_TLBI_1_LEAF (1UL << 0)
#define CMDQ_TLBI_1_VA_MASK GENMASK_ULL(63, 12)
-#define CMDQ_TLBI_1_IPA_MASK GENMASK_ULL(47, 12)
+#define CMDQ_TLBI_1_IPA_MASK GENMASK_ULL(51, 12)
#define CMDQ_PRI_0_SSID_SHIFT 12
#define CMDQ_PRI_0_SSID_MASK 0xfffffUL
@@ -380,7 +381,7 @@
#define CMDQ_SYNC_0_MSIATTR_OIWB (0xfUL << CMDQ_SYNC_0_MSIATTR_SHIFT)
#define CMDQ_SYNC_0_MSIDATA_SHIFT 32
#define CMDQ_SYNC_0_MSIDATA_MASK 0xffffffffUL
-#define CMDQ_SYNC_1_MSIADDR_MASK GENMASK_ULL(47, 2)
+#define CMDQ_SYNC_1_MSIADDR_MASK GENMASK_ULL(51, 2)
/* Event queue */
#define EVTQ_ENT_DWORDS 4
@@ -1686,7 +1687,7 @@ static int arm_smmu_domain_finalise(struct iommu_domain *domain)
return -ENOMEM;
domain->pgsize_bitmap = pgtbl_cfg.pgsize_bitmap;
- domain->geometry.aperture_end = (1UL << ias) - 1;
+ domain->geometry.aperture_end = (1UL << pgtbl_cfg.ias) - 1;
domain->geometry.force_aperture = true;
smmu_domain->pgtbl_ops = pgtbl_ops;
@@ -2693,11 +2694,6 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
if (reg & IDR5_GRAN4K)
smmu->pgsize_bitmap |= SZ_4K | SZ_2M | SZ_1G;
- if (arm_smmu_ops.pgsize_bitmap == -1UL)
- arm_smmu_ops.pgsize_bitmap = smmu->pgsize_bitmap;
- else
- arm_smmu_ops.pgsize_bitmap |= smmu->pgsize_bitmap;
-
/* Output address size */
switch (reg & IDR5_OAS_MASK << IDR5_OAS_SHIFT) {
case IDR5_OAS_32_BIT:
@@ -2715,6 +2711,10 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
case IDR5_OAS_44_BIT:
smmu->oas = 44;
break;
+ case IDR5_OAS_52_BIT:
+ smmu->oas = 52;
+ smmu->pgsize_bitmap |= 1ULL << 42; /* 4TB */
+ break;
default:
dev_info(smmu->dev,
"unknown output address size. Truncating to 48-bit\n");
@@ -2723,6 +2723,11 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
smmu->oas = 48;
}
+ if (arm_smmu_ops.pgsize_bitmap == -1UL)
+ arm_smmu_ops.pgsize_bitmap = smmu->pgsize_bitmap;
+ else
+ arm_smmu_ops.pgsize_bitmap |= smmu->pgsize_bitmap;
+
/* Set the DMA mask for our table walker */
if (dma_set_mask_and_coherent(smmu->dev, DMA_BIT_MASK(smmu->oas)))
dev_warn(smmu->dev,
--
2.13.4.dirty
^ permalink raw reply related
* [PATCH v2 2/4] iommu/io-pgtable-arm: Support 52-bit physical address
From: Robin Murphy @ 2017-12-14 16:58 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1512038236.git.robin.murphy@arm.com>
Bring io-pgtable-arm in line with the ARMv8.2-LPA feature allowing
52-bit physical addresses when using the 64KB translation granule.
This will be supported by SMMUv3.1.
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
---
v2: Fix TCR_PS/TCR_IPS copy-paste error
drivers/iommu/io-pgtable-arm.c | 65 ++++++++++++++++++++++++++++++------------
1 file changed, 47 insertions(+), 18 deletions(-)
diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c
index 51e5c43caed1..10d888b02948 100644
--- a/drivers/iommu/io-pgtable-arm.c
+++ b/drivers/iommu/io-pgtable-arm.c
@@ -21,6 +21,7 @@
#define pr_fmt(fmt) "arm-lpae io-pgtable: " fmt
#include <linux/atomic.h>
+#include <linux/bitops.h>
#include <linux/iommu.h>
#include <linux/kernel.h>
#include <linux/sizes.h>
@@ -32,7 +33,7 @@
#include "io-pgtable.h"
-#define ARM_LPAE_MAX_ADDR_BITS 48
+#define ARM_LPAE_MAX_ADDR_BITS 52
#define ARM_LPAE_S2_MAX_CONCAT_PAGES 16
#define ARM_LPAE_MAX_LEVELS 4
@@ -86,6 +87,8 @@
#define ARM_LPAE_PTE_TYPE_TABLE 3
#define ARM_LPAE_PTE_TYPE_PAGE 3
+#define ARM_LPAE_PTE_ADDR_MASK GENMASK_ULL(47,12)
+
#define ARM_LPAE_PTE_NSTABLE (((arm_lpae_iopte)1) << 63)
#define ARM_LPAE_PTE_XN (((arm_lpae_iopte)3) << 53)
#define ARM_LPAE_PTE_AF (((arm_lpae_iopte)1) << 10)
@@ -159,6 +162,7 @@
#define ARM_LPAE_TCR_PS_42_BIT 0x3ULL
#define ARM_LPAE_TCR_PS_44_BIT 0x4ULL
#define ARM_LPAE_TCR_PS_48_BIT 0x5ULL
+#define ARM_LPAE_TCR_PS_52_BIT 0x6ULL
#define ARM_LPAE_MAIR_ATTR_SHIFT(n) ((n) << 3)
#define ARM_LPAE_MAIR_ATTR_MASK 0xff
@@ -170,9 +174,7 @@
#define ARM_LPAE_MAIR_ATTR_IDX_DEV 2
/* IOPTE accessors */
-#define iopte_deref(pte,d) \
- (__va((pte) & ((1ULL << ARM_LPAE_MAX_ADDR_BITS) - 1) \
- & ~(ARM_LPAE_GRANULE(d) - 1ULL)))
+#define iopte_deref(pte,d) __va(iopte_to_paddr(pte, d))
#define iopte_type(pte,l) \
(((pte) >> ARM_LPAE_PTE_TYPE_SHIFT) & ARM_LPAE_PTE_TYPE_MASK)
@@ -184,12 +186,6 @@
(iopte_type(pte,l) == ARM_LPAE_PTE_TYPE_PAGE) : \
(iopte_type(pte,l) == ARM_LPAE_PTE_TYPE_BLOCK))
-#define iopte_to_pfn(pte,d) \
- (((pte) & ((1ULL << ARM_LPAE_MAX_ADDR_BITS) - 1)) >> (d)->pg_shift)
-
-#define pfn_to_iopte(pfn,d) \
- (((pfn) << (d)->pg_shift) & ((1ULL << ARM_LPAE_MAX_ADDR_BITS) - 1))
-
struct arm_lpae_io_pgtable {
struct io_pgtable iop;
@@ -203,6 +199,25 @@ struct arm_lpae_io_pgtable {
typedef u64 arm_lpae_iopte;
+static arm_lpae_iopte paddr_to_iopte(phys_addr_t paddr,
+ struct arm_lpae_io_pgtable *data)
+{
+ arm_lpae_iopte pte = paddr;
+
+ /* Of the bits which overlap, either 51:48 or 15:12 are always RES0 */
+ return (pte | (pte >> 36)) & ARM_LPAE_PTE_ADDR_MASK;
+}
+
+static phys_addr_t iopte_to_paddr(arm_lpae_iopte pte,
+ struct arm_lpae_io_pgtable *data)
+{
+ phys_addr_t paddr = pte & ARM_LPAE_PTE_ADDR_MASK;
+ phys_addr_t paddr_hi = paddr & (ARM_LPAE_GRANULE(data) - 1);
+
+ /* paddr_hi spans nothing for 4K granule, and only RES0 bits for 16K */
+ return (paddr ^ paddr_hi) | (paddr_hi << 36);
+}
+
static bool selftest_running = false;
static dma_addr_t __arm_lpae_dma_addr(void *pages)
@@ -287,7 +302,7 @@ static void __arm_lpae_init_pte(struct arm_lpae_io_pgtable *data,
pte |= ARM_LPAE_PTE_TYPE_BLOCK;
pte |= ARM_LPAE_PTE_AF | ARM_LPAE_PTE_SH_IS;
- pte |= pfn_to_iopte(paddr >> data->pg_shift, data);
+ pte |= paddr_to_iopte(paddr, data);
__arm_lpae_set_pte(ptep, pte, &data->iop.cfg);
}
@@ -528,7 +543,7 @@ static int arm_lpae_split_blk_unmap(struct arm_lpae_io_pgtable *data,
if (size == split_sz)
unmap_idx = ARM_LPAE_LVL_IDX(iova, lvl, data);
- blk_paddr = iopte_to_pfn(blk_pte, data) << data->pg_shift;
+ blk_paddr = iopte_to_paddr(blk_pte, data);
pte = iopte_prot(blk_pte);
for (i = 0; i < tablesz / sizeof(pte); i++, blk_paddr += split_sz) {
@@ -652,12 +667,13 @@ static phys_addr_t arm_lpae_iova_to_phys(struct io_pgtable_ops *ops,
found_translation:
iova &= (ARM_LPAE_BLOCK_SIZE(lvl, data) - 1);
- return ((phys_addr_t)iopte_to_pfn(pte,data) << data->pg_shift) | iova;
+ return iopte_to_paddr(pte, data) | iova;
}
static void arm_lpae_restrict_pgsizes(struct io_pgtable_cfg *cfg)
{
- unsigned long granule;
+ unsigned long granule, page_sizes;
+ unsigned int max_addr_bits = 48;
/*
* We need to restrict the supported page sizes to match the
@@ -677,17 +693,24 @@ static void arm_lpae_restrict_pgsizes(struct io_pgtable_cfg *cfg)
switch (granule) {
case SZ_4K:
- cfg->pgsize_bitmap &= (SZ_4K | SZ_2M | SZ_1G);
+ page_sizes = (SZ_4K | SZ_2M | SZ_1G);
break;
case SZ_16K:
- cfg->pgsize_bitmap &= (SZ_16K | SZ_32M);
+ page_sizes = (SZ_16K | SZ_32M);
break;
case SZ_64K:
- cfg->pgsize_bitmap &= (SZ_64K | SZ_512M);
+ max_addr_bits = 52;
+ page_sizes = (SZ_64K | SZ_512M);
+ if (cfg->oas > 48)
+ page_sizes |= 1ULL << 42; /* 4TB */
break;
default:
- cfg->pgsize_bitmap = 0;
+ page_sizes = 0;
}
+
+ cfg->pgsize_bitmap &= page_sizes;
+ cfg->ias = min(cfg->ias, max_addr_bits);
+ cfg->oas = min(cfg->oas, max_addr_bits);
}
static struct arm_lpae_io_pgtable *
@@ -784,6 +807,9 @@ arm_64_lpae_alloc_pgtable_s1(struct io_pgtable_cfg *cfg, void *cookie)
case 48:
reg |= (ARM_LPAE_TCR_PS_48_BIT << ARM_LPAE_TCR_IPS_SHIFT);
break;
+ case 52:
+ reg |= (ARM_LPAE_TCR_PS_52_BIT << ARM_LPAE_TCR_IPS_SHIFT);
+ break;
default:
goto out_free_data;
}
@@ -891,6 +917,9 @@ arm_64_lpae_alloc_pgtable_s2(struct io_pgtable_cfg *cfg, void *cookie)
case 48:
reg |= (ARM_LPAE_TCR_PS_48_BIT << ARM_LPAE_TCR_PS_SHIFT);
break;
+ case 52:
+ reg |= (ARM_LPAE_TCR_PS_52_BIT << ARM_LPAE_TCR_PS_SHIFT);
+ break;
default:
goto out_free_data;
}
--
2.13.4.dirty
^ permalink raw reply related
* [PATCH v2 1/4] iommu/arm-smmu-v3: Clean up address masking
From: Robin Murphy @ 2017-12-14 16:58 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1512038236.git.robin.murphy@arm.com>
Before trying to add the SMMUv3.1 support for 52-bit addresses, make
things bearable by cleaning up the various address mask definitions to
use GENMASK_ULL() consistently. The fact that doing so reveals (and
fixes) a latent off-by-one in Q_BASE_ADDR_MASK only goes to show what a
jolly good idea it is...
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
---
v2: Clean up one more now-unnecessary linewrap
drivers/iommu/arm-smmu-v3.c | 53 ++++++++++++++++++---------------------------
1 file changed, 21 insertions(+), 32 deletions(-)
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index f122071688fd..52cad776b31b 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -22,6 +22,7 @@
#include <linux/acpi.h>
#include <linux/acpi_iort.h>
+#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/dma-iommu.h>
#include <linux/err.h>
@@ -158,8 +159,7 @@
#define ARM_SMMU_STRTAB_BASE 0x80
#define STRTAB_BASE_RA (1UL << 62)
-#define STRTAB_BASE_ADDR_SHIFT 6
-#define STRTAB_BASE_ADDR_MASK 0x3ffffffffffUL
+#define STRTAB_BASE_ADDR_MASK GENMASK_ULL(47, 6)
#define ARM_SMMU_STRTAB_BASE_CFG 0x88
#define STRTAB_BASE_CFG_LOG2SIZE_SHIFT 0
@@ -190,8 +190,7 @@
#define ARM_SMMU_PRIQ_IRQ_CFG2 0xdc
/* Common MSI config fields */
-#define MSI_CFG0_ADDR_SHIFT 2
-#define MSI_CFG0_ADDR_MASK 0x3fffffffffffUL
+#define MSI_CFG0_ADDR_MASK GENMASK_ULL(47, 2)
#define MSI_CFG2_SH_SHIFT 4
#define MSI_CFG2_SH_NSH (0UL << MSI_CFG2_SH_SHIFT)
#define MSI_CFG2_SH_OSH (2UL << MSI_CFG2_SH_SHIFT)
@@ -207,8 +206,7 @@
Q_IDX(q, p) * (q)->ent_dwords)
#define Q_BASE_RWA (1UL << 62)
-#define Q_BASE_ADDR_SHIFT 5
-#define Q_BASE_ADDR_MASK 0xfffffffffffUL
+#define Q_BASE_ADDR_MASK GENMASK_ULL(47, 5)
#define Q_BASE_LOG2SIZE_SHIFT 0
#define Q_BASE_LOG2SIZE_MASK 0x1fUL
@@ -225,8 +223,7 @@
#define STRTAB_L1_DESC_DWORDS 1
#define STRTAB_L1_DESC_SPAN_SHIFT 0
#define STRTAB_L1_DESC_SPAN_MASK 0x1fUL
-#define STRTAB_L1_DESC_L2PTR_SHIFT 6
-#define STRTAB_L1_DESC_L2PTR_MASK 0x3ffffffffffUL
+#define STRTAB_L1_DESC_L2PTR_MASK GENMASK_ULL(47, 6)
#define STRTAB_STE_DWORDS 8
#define STRTAB_STE_0_V (1UL << 0)
@@ -239,8 +236,7 @@
#define STRTAB_STE_0_S1FMT_SHIFT 4
#define STRTAB_STE_0_S1FMT_LINEAR (0UL << STRTAB_STE_0_S1FMT_SHIFT)
-#define STRTAB_STE_0_S1CTXPTR_SHIFT 6
-#define STRTAB_STE_0_S1CTXPTR_MASK 0x3ffffffffffUL
+#define STRTAB_STE_0_S1CTXPTR_MASK GENMASK_ULL(47, 6)
#define STRTAB_STE_0_S1CDMAX_SHIFT 59
#define STRTAB_STE_0_S1CDMAX_MASK 0x1fUL
@@ -278,8 +274,7 @@
#define STRTAB_STE_2_S2PTW (1UL << 54)
#define STRTAB_STE_2_S2R (1UL << 58)
-#define STRTAB_STE_3_S2TTB_SHIFT 4
-#define STRTAB_STE_3_S2TTB_MASK 0xfffffffffffUL
+#define STRTAB_STE_3_S2TTB_MASK GENMASK_ULL(47, 4)
/* Context descriptor (stage-1 only) */
#define CTXDESC_CD_DWORDS 8
@@ -325,8 +320,7 @@
#define CTXDESC_CD_0_ASID_SHIFT 48
#define CTXDESC_CD_0_ASID_MASK 0xffffUL
-#define CTXDESC_CD_1_TTB0_SHIFT 4
-#define CTXDESC_CD_1_TTB0_MASK 0xfffffffffffUL
+#define CTXDESC_CD_1_TTB0_MASK GENMASK_ULL(47, 4)
#define CTXDESC_CD_3_MAIR_SHIFT 0
@@ -351,7 +345,7 @@
#define CMDQ_PREFETCH_0_SID_SHIFT 32
#define CMDQ_PREFETCH_1_SIZE_SHIFT 0
-#define CMDQ_PREFETCH_1_ADDR_MASK ~0xfffUL
+#define CMDQ_PREFETCH_1_ADDR_MASK GENMASK_ULL(63, 12)
#define CMDQ_CFGI_0_SID_SHIFT 32
#define CMDQ_CFGI_0_SID_MASK 0xffffffffUL
@@ -362,8 +356,8 @@
#define CMDQ_TLBI_0_VMID_SHIFT 32
#define CMDQ_TLBI_0_ASID_SHIFT 48
#define CMDQ_TLBI_1_LEAF (1UL << 0)
-#define CMDQ_TLBI_1_VA_MASK ~0xfffUL
-#define CMDQ_TLBI_1_IPA_MASK 0xfffffffff000UL
+#define CMDQ_TLBI_1_VA_MASK GENMASK_ULL(63, 12)
+#define CMDQ_TLBI_1_IPA_MASK GENMASK_ULL(47, 12)
#define CMDQ_PRI_0_SSID_SHIFT 12
#define CMDQ_PRI_0_SSID_MASK 0xfffffUL
@@ -386,8 +380,7 @@
#define CMDQ_SYNC_0_MSIATTR_OIWB (0xfUL << CMDQ_SYNC_0_MSIATTR_SHIFT)
#define CMDQ_SYNC_0_MSIDATA_SHIFT 32
#define CMDQ_SYNC_0_MSIDATA_MASK 0xffffffffUL
-#define CMDQ_SYNC_1_MSIADDR_SHIFT 0
-#define CMDQ_SYNC_1_MSIADDR_MASK 0xffffffffffffcUL
+#define CMDQ_SYNC_1_MSIADDR_MASK GENMASK_ULL(47, 2)
/* Event queue */
#define EVTQ_ENT_DWORDS 4
@@ -413,8 +406,7 @@
#define PRIQ_1_PRG_IDX_SHIFT 0
#define PRIQ_1_PRG_IDX_MASK 0x1ffUL
-#define PRIQ_1_ADDR_SHIFT 12
-#define PRIQ_1_ADDR_MASK 0xfffffffffffffUL
+#define PRIQ_1_ADDR_MASK GENMASK_ULL(63, 12)
/* High-level queue structures */
#define ARM_SMMU_POLL_TIMEOUT_US 100
@@ -1093,7 +1085,7 @@ static void arm_smmu_write_ctx_desc(struct arm_smmu_device *smmu,
cfg->cdptr[0] = cpu_to_le64(val);
- val = cfg->cd.ttbr & CTXDESC_CD_1_TTB0_MASK << CTXDESC_CD_1_TTB0_SHIFT;
+ val = cfg->cd.ttbr & CTXDESC_CD_1_TTB0_MASK;
cfg->cdptr[1] = cpu_to_le64(val);
cfg->cdptr[3] = cpu_to_le64(cfg->cd.mair << CTXDESC_CD_3_MAIR_SHIFT);
@@ -1107,8 +1099,7 @@ arm_smmu_write_strtab_l1_desc(__le64 *dst, struct arm_smmu_strtab_l1_desc *desc)
val |= (desc->span & STRTAB_L1_DESC_SPAN_MASK)
<< STRTAB_L1_DESC_SPAN_SHIFT;
- val |= desc->l2ptr_dma &
- STRTAB_L1_DESC_L2PTR_MASK << STRTAB_L1_DESC_L2PTR_SHIFT;
+ val |= desc->l2ptr_dma & STRTAB_L1_DESC_L2PTR_MASK;
*dst = cpu_to_le64(val);
}
@@ -1214,8 +1205,7 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_device *smmu, u32 sid,
!(smmu->features & ARM_SMMU_FEAT_STALL_FORCE))
dst[1] |= cpu_to_le64(STRTAB_STE_1_S1STALLD);
- val |= (ste->s1_cfg->cdptr_dma & STRTAB_STE_0_S1CTXPTR_MASK
- << STRTAB_STE_0_S1CTXPTR_SHIFT) |
+ val |= (ste->s1_cfg->cdptr_dma & STRTAB_STE_0_S1CTXPTR_MASK) |
STRTAB_STE_0_CFG_S1_TRANS;
}
@@ -1232,7 +1222,7 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_device *smmu, u32 sid,
STRTAB_STE_2_S2R);
dst[3] = cpu_to_le64(ste->s2_cfg->vttbr &
- STRTAB_STE_3_S2TTB_MASK << STRTAB_STE_3_S2TTB_SHIFT);
+ STRTAB_STE_3_S2TTB_MASK);
val |= STRTAB_STE_0_CFG_S2_TRANS;
}
@@ -1337,7 +1327,7 @@ static void arm_smmu_handle_ppr(struct arm_smmu_device *smmu, u64 *evt)
evt[0] & PRIQ_0_PERM_READ ? "R" : "",
evt[0] & PRIQ_0_PERM_WRITE ? "W" : "",
evt[0] & PRIQ_0_PERM_EXEC ? "X" : "",
- evt[1] & PRIQ_1_ADDR_MASK << PRIQ_1_ADDR_SHIFT);
+ evt[1] & PRIQ_1_ADDR_MASK);
if (last) {
struct arm_smmu_cmdq_ent cmd = {
@@ -2093,7 +2083,7 @@ static int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
q->ent_dwords = dwords;
q->q_base = Q_BASE_RWA;
- q->q_base |= q->base_dma & Q_BASE_ADDR_MASK << Q_BASE_ADDR_SHIFT;
+ q->q_base |= q->base_dma & Q_BASE_ADDR_MASK;
q->q_base |= (q->max_n_shift & Q_BASE_LOG2SIZE_MASK)
<< Q_BASE_LOG2SIZE_SHIFT;
@@ -2230,8 +2220,7 @@ static int arm_smmu_init_strtab(struct arm_smmu_device *smmu)
return ret;
/* Set the strtab base address */
- reg = smmu->strtab_cfg.strtab_dma &
- STRTAB_BASE_ADDR_MASK << STRTAB_BASE_ADDR_SHIFT;
+ reg = smmu->strtab_cfg.strtab_dma & STRTAB_BASE_ADDR_MASK;
reg |= STRTAB_BASE_RA;
smmu->strtab_cfg.strtab_base = reg;
@@ -2294,7 +2283,7 @@ static void arm_smmu_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
phys_addr_t *cfg = arm_smmu_msi_cfg[desc->platform.msi_index];
doorbell = (((u64)msg->address_hi) << 32) | msg->address_lo;
- doorbell &= MSI_CFG0_ADDR_MASK << MSI_CFG0_ADDR_SHIFT;
+ doorbell &= MSI_CFG0_ADDR_MASK;
writeq_relaxed(doorbell, smmu->base + cfg[0]);
writel_relaxed(msg->data, smmu->base + cfg[1]);
--
2.13.4.dirty
^ permalink raw reply related
* [PATCH v2 0/4] SMMU 52-bit address support
From: Robin Murphy @ 2017-12-14 16:58 UTC (permalink / raw)
To: linux-arm-kernel
Hi all,
Here's a (hopefully final) update of 52-bit SMMU support. The only
material changes from v1[1] are a small cosmetic tweak to patch #1,
and correction of the silly error in patch #2 as reported by Nate in
testing.
Robin.
[1] https://lists.linuxfoundation.org/pipermail/iommu/2017-November/025073.html
Robin Murphy (4):
iommu/arm-smmu-v3: Clean up address masking
iommu/io-pgtable-arm: Support 52-bit physical address
iommu/arm-smmu-v3: Support 52-bit physical address
iommu/arm-smmu-v3: Support 52-bit virtual address
drivers/iommu/arm-smmu-v3.c | 76 ++++++++++++++++++++++--------------------
drivers/iommu/io-pgtable-arm.c | 65 ++++++++++++++++++++++++++----------
2 files changed, 86 insertions(+), 55 deletions(-)
--
2.13.4.dirty
^ permalink raw reply
* [RFC PATCH 2/2] ASoC: select sysclk clock from mlck clock provider in wm8994 driver
From: Olivier Moysan @ 2017-12-14 16:53 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1513270438-18523-1-git-send-email-olivier.moysan@st.com>
When defined in device tree, MCLK1 and MCLK2 are used
as sysclk for aif1 and aif2 interfaces respectively.
If clock rate is let 0, the frequency provided by
wm8994_set_dai_sysclk() is used instead.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
---
sound/soc/codecs/wm8994.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 21ffd64..7a84e37 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -11,6 +11,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/clk.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
@@ -2376,18 +2377,35 @@ static int wm8994_set_dai_sysclk(struct snd_soc_dai *dai,
{
struct snd_soc_codec *codec = dai->codec;
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+ struct wm8994 *control = wm8994->wm8994;
+ struct wm8994_pdata *pdata = &control->pdata;
+ unsigned long rate;
int i;
switch (dai->id) {
case 1:
+ if (pdata->mclk1) {
+ rate = clk_get_rate(pdata->mclk1);
+ if (rate)
+ freq = (unsigned int)rate;
+ clk_id = WM8994_SYSCLK_MCLK1;
+ }
+ break;
case 2:
+ if (pdata->mclk2) {
+ rate = clk_get_rate(pdata->mclk2);
+ if (rate)
+ freq = (unsigned int)rate;
+ clk_id = WM8994_SYSCLK_MCLK2;
+ }
break;
-
default:
/* AIF3 shares clocking with AIF1/2 */
return -EINVAL;
}
+ dev_info(codec->dev, "%s:.clock id %d\n", __func__, clk_id);
+
switch (clk_id) {
case WM8994_SYSCLK_MCLK1:
wm8994->sysclk[dai->id - 1] = WM8994_SYSCLK_MCLK1;
--
1.9.1
^ permalink raw reply related
* [RFC PATCH 1/2] ASoC: add support of mclk clock providers in wm8894 driver
From: Olivier Moysan @ 2017-12-14 16:53 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1513270438-18523-1-git-send-email-olivier.moysan@st.com>
Wolfson wm8994 codec bindings exposes MCLK1 and MCLK1 clocks.
This patch adds support of MCLK1 and MCLK2 in mfd driver.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
---
drivers/mfd/wm8994-core.c | 9 +++++++++
include/linux/mfd/wm8994/pdata.h | 6 ++++++
2 files changed, 15 insertions(+)
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 953d079..f1ff9d8 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -12,6 +12,7 @@
*
*/
+#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -310,6 +311,14 @@ static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
if (pdata->ldo[1].enable < 0)
pdata->ldo[1].enable = 0;
+ pdata->mclk1 = devm_clk_get(wm8994->dev, "MCLK1");
+ if (IS_ERR(pdata->mclk1))
+ pdata->mclk1 = NULL;
+
+ pdata->mclk2 = devm_clk_get(wm8994->dev, "MCLK2");
+ if (IS_ERR(pdata->mclk2))
+ pdata->mclk2 = NULL;
+
return 0;
}
#else
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index 90c6052..8037d26 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -233,6 +233,12 @@ struct wm8994_pdata {
* GPIO for the IRQ pin if host only supports edge triggering
*/
int irq_gpio;
+
+ /* MCLK1 clock provider */
+ struct clk *mclk1;
+
+ /* MCLK2 clock provider */
+ struct clk *mclk2;
};
#endif
--
1.9.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox