* [PATCH 30/37] ARM: dts: r8a7745: Add sound support
From: Simon Horman @ 2017-12-22 10:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Biju Das <biju.das@bp.renesas.com>
Define the generic r8a7745(RZ/G1E) part of the sound device node.
This patch is based on the r8a7794 sound work by Sergei Shtylyov.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 180 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 180 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index d9488a116236..835a2821477b 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -1293,6 +1293,186 @@
resets = <&cpg 915>;
status = "disabled";
};
+
+ rcar_sound: sound at ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a7745",
+ "renesas,rcar_sound-gen2";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri */
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+ <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>,
+ <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>,
+ <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+ <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clka>, <&audio_clkb>, <&audio_clkc>,
+ <&cpg CPG_CORE R8A7745_CLK_M2>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.6", "src.5", "src.4", "src.3",
+ "src.2", "src.1",
+ "ctu.0", "ctu.1",
+ "mix.0", "mix.1",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>, <&cpg 1008>,
+ <&cpg 1009>, <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>, <&cpg 1014>,
+ <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
+
+ status = "disabled";
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma0 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma0 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,src {
+ src-0 {
+ status = "disabled";
+ };
+ src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma0 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma0 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma0 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma0 0x02>,
+ <&audma0 0x15>, <&audma0 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma0 0x04>,
+ <&audma0 0x49>, <&audma0 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi2: ssi-2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma0 0x06>,
+ <&audma0 0x63>, <&audma0 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma0 0x08>,
+ <&audma0 0x6f>, <&audma0 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma0 0x0a>,
+ <&audma0 0x71>, <&audma0 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+ <&audma0 0x73>, <&audma0 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+ <&audma0 0x75>, <&audma0 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma0 0x10>,
+ <&audma0 0x79>, <&audma0 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma0 0x12>,
+ <&audma0 0x7b>, <&audma0 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma0 0x14>,
+ <&audma0 0x7d>, <&audma0 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ };
+ };
};
timer {
--
2.11.0
^ permalink raw reply related
* [PATCH 29/37] ARM: dts: r8a7745: Add audio DMAC support
From: Simon Horman @ 2017-12-22 10:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Biju Das <biju.das@bp.renesas.com>
Instantiate the audio DMA controller on the r8a7745 device tree.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 6d085f004721..d9488a116236 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -397,6 +397,37 @@
dma-channels = <15>;
};
+ audma0: dma-controller at ec700000 {
+ compatible = "renesas,dmac-r8a7745",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <13>;
+ };
+
usb_dmac0: dma-controller at e65a0000 {
compatible = "renesas,r8a7745-usb-dmac",
"renesas,usb-dmac";
--
2.11.0
^ permalink raw reply related
* [PATCH 28/37] ARM: dts: r8a7745: Add audio clocks
From: Simon Horman @ 2017-12-22 10:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Biju Das <biju.das@bp.renesas.com>
Describe the external audio clocks required by the sound driver.
Boards that provide audio clocks need to override the clock frequencies.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 2be7485c4efe..6d085f004721 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -35,6 +35,27 @@
vin1 = &vin1;
};
+ /*
+ * The external audio clocks are configured as 0 Hz fixed
+ * frequency clocks by default. Boards that provide audio
+ * clocks should override them.
+ */
+ audio_clka: audio_clka {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clkb: audio_clkb {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clkc: audio_clkc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
/* External CAN clock */
can_clk: can {
compatible = "fixed-clock";
--
2.11.0
^ permalink raw reply related
* [PATCH 27/37] ARM: dts: r8a7740: Correct TPU register block size
From: Simon Horman @ 2017-12-22 10:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be>
The Timer Pulse Unit has registers that lie outside the declared
register block. Enlarge the register block size to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 95c408b11991..afd3bc5e6cf2 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -317,7 +317,7 @@
tpu: pwm at e6600000 {
compatible = "renesas,tpu-r8a7740", "renesas,tpu";
- reg = <0xe6600000 0x100>;
+ reg = <0xe6600000 0x148>;
clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
power-domains = <&pd_a3sp>;
status = "disabled";
--
2.11.0
^ permalink raw reply related
* [PATCH 26/37] ARM: dts: r8a7743: move timer and thermal-zones nodes out of bus
From: Simon Horman @ 2017-12-22 10:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
The timer and thermal-zones nodes do not have any register properties and
thus shouldn't be placed on the bus.
This problem is flagged by the compiler as follows:
$ make
DTC arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dtb
arch/arm/boot/dts/r8a7743-iwg20d-q7.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
arch/arm/boot/dts/r8a7743-iwg20d-q7.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
DTC arch/arm/boot/dts/r8a7743-sk-rzg1m.dtb
arch/arm/boot/dts/r8a7743-sk-rzg1m.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property
arch/arm/boot/dts/r8a7743-sk-rzg1m.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7743.dtsi | 60 ++++++++++++++++++++----------------------
1 file changed, 28 insertions(+), 32 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index ecbd39e5f630..0b74c6c7d21d 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -316,38 +316,6 @@
#thermal-sensor-cells = <0>;
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
-
- thermal-sensors = <&thermal>;
-
- trips {
- cpu-crit {
- temperature = <95000>;
- hysteresis = <0>;
- type = "critical";
- };
- };
-
- cooling-maps {
- };
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_LOW)>;
- };
-
cmt0: timer at ffca0000 {
compatible = "renesas,r8a7743-cmt0",
"renesas,rcar-gen2-cmt0";
@@ -1675,6 +1643,34 @@
};
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu-crit {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
/* External USB clock - can be overridden by the board */
usb_extal_clk: usb_extal {
compatible = "fixed-clock";
--
2.11.0
^ permalink raw reply related
* [PATCH 25/37] ARM: dts: r8a7743: sort root sub-nodes alphabetically
From: Simon Horman @ 2017-12-22 10:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
Sort root sub-nodes alphabetically to allow for easier maintenance
of this file.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7743.dtsi | 108 ++++++++++++++++++++---------------------
1 file changed, 54 insertions(+), 54 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index f24f36d50e40..ecbd39e5f630 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -37,6 +37,37 @@
vin2 = &vin2;
};
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -79,6 +110,29 @@
};
};
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@@ -1621,64 +1675,10 @@
};
};
- /* External root clock */
- extal_clk: extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /*
- * The external audio clocks are configured as 0 Hz fixed frequency
- * clocks by default.
- * Boards that provide audio clocks should override them.
- */
- audio_clk_a: audio_clk_a {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- audio_clk_b: audio_clk_b {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- audio_clk_c: audio_clk_c {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
/* External USB clock - can be overridden by the board */
usb_extal_clk: usb_extal {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <48000000>;
};
-
- /* External CAN clock */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /* External PCIe clock - can be overridden by the board */
- pcie_bus_clk: pcie_bus {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- /* External SCIF clock */
- scif_clk: scif {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
};
--
2.11.0
^ permalink raw reply related
* [PATCH 24/37] ARM: dts: iwg20d-q7-common: Sound DMA support via DVC on DTS
From: Simon Horman @ 2017-12-22 10:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Biju Das <biju.das@bp.renesas.com>
DMA transfer uses DVC
DMA DMApp
[MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI]
DMA DMApp
[MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI]
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 27 +++++++++++++++++++++++++--
1 file changed, 25 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 952b79e1b391..66954aaf2c47 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -8,6 +8,29 @@
* kind, whether express or implied.
*/
+/*
+ * SSI-SGTL5000
+ *
+ * This command is required when Playback/Capture
+ *
+ * amixer set "DVC Out" 100%
+ * amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ * amixer set "DVC Out Mute" on
+ * amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
+ * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ * amixer set "DVC Out Ramp" on
+ * aplay xxx.wav &
+ * amixer set "DVC Out" 80% // Volume Down
+ * amixer set "DVC Out" 100% // Volume Up
+ */
+
/ {
aliases {
serial0 = &scif0;
@@ -208,8 +231,8 @@
rcar_sound,dai {
dai0 {
- playback = <&ssi1 &src3>;
- capture = <&ssi0 &src2>;
+ playback = <&ssi1 &src3 &dvc1>;
+ capture = <&ssi0 &src2 &dvc0>;
};
};
};
--
2.11.0
^ permalink raw reply related
* [PATCH 23/37] ARM: dts: iwg20d-q7-common: Sound DMA support via SRC on DTS
From: Simon Horman @ 2017-12-22 10:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Biju Das <biju.das@bp.renesas.com>
DMA transfer to/from SRC
DMA DMApp
[MEM] -> [SRC] -> [SSIU] -> [SSI]
DMA DMApp
[MEM] <- [SRC] <- [SSIU] <- [SSI]
Current sound driver is supporting SSI/SRC random connection.
So, this patch is trying
SSI1 -> SRC3
SSI0 <- SRC2
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 00b5b1351b26..952b79e1b391 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -208,8 +208,8 @@
rcar_sound,dai {
dai0 {
- playback = <&ssi1>;
- capture = <&ssi0>;
+ playback = <&ssi1 &src3>;
+ capture = <&ssi0 &src2>;
};
};
};
--
2.11.0
^ permalink raw reply related
* [PATCH 22/37] ARM: dts: iwg20d-q7-common: Sound DMA support via BUSIF on DTS
From: Simon Horman @ 2017-12-22 10:30 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Biju Das <biju.das@bp.renesas.com>
DMA transfer to/from SSIU
DMA
[MEM] -> [SSIU] -> [SSI]
DMA
[MEM] <- [SSIU] <- [SSI]
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 5 -----
1 file changed, 5 deletions(-)
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 0c0f08649fda..00b5b1351b26 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -242,12 +242,7 @@
status = "okay";
};
-&ssi0 {
- no-busif;
-};
-
&ssi1 {
- no-busif;
shared-pin;
};
--
2.11.0
^ permalink raw reply related
* [PATCH 21/37] ARM: dts: iwg20d-q7-common: Sound DMA support on DTS
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Biju Das <biju.das@bp.renesas.com>
DMA transfer to/from SSI
DMA
[MEM] -> [SSI]
DMA
[MEM] <- [SSI]
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index f6b0eead6f92..0c0f08649fda 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -243,11 +243,11 @@
};
&ssi0 {
- pio-transfer;
+ no-busif;
};
&ssi1 {
- pio-transfer;
+ no-busif;
shared-pin;
};
--
2.11.0
^ permalink raw reply related
* [PATCH 20/37] ARM: dts: iwg20d-q7-common: Sound PIO support
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Biju Das <biju.das@bp.renesas.com>
Enable sound PIO support on carrier board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 46 +++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 03d41a736afd..f6b0eead6f92 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -34,6 +34,22 @@
regulator-always-on;
};
+ rsnd_sgtl5000: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sndcodec>;
+ simple-audio-card,frame-master = <&sndcodec>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ };
+ };
+
vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
@@ -166,6 +182,11 @@
power-source = <1800>;
};
+ sound_pins: sound {
+ groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+ function = "ssi";
+ };
+
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
@@ -177,6 +198,22 @@
};
};
+&rcar_sound {
+ pinctrl-0 = <&sound_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi1>;
+ capture = <&ssi0>;
+ };
+ };
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
@@ -205,6 +242,15 @@
status = "okay";
};
+&ssi0 {
+ pio-transfer;
+};
+
+&ssi1 {
+ pio-transfer;
+ shared-pin;
+};
+
&usbphy {
status = "okay";
};
--
2.11.0
^ permalink raw reply related
* [PATCH 19/37] ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Biju Das <biju.das@bp.renesas.com>
This patch enables SGTL5000 audio codec on the carrier board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 54470c6de891..03d41a736afd 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -20,6 +20,20 @@
stdout-path = "serial0:115200n8";
};
+ audio_clock: audio_clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ reg_1p5v: 1p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P5V";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
@@ -83,6 +97,16 @@
compatible = "ti,bq32000";
reg = <0x68>;
};
+
+ sgtl5000: codec at a {
+ compatible = "fsl,sgtl5000";
+ #sound-dai-cells = <0>;
+ reg = <0x0a>;
+ clocks = <&audio_clock>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ VDDD-supply = <®_1p5v>;
+ };
};
&pci0 {
--
2.11.0
^ permalink raw reply related
* [PATCH 18/37] ARM: dts: r8a7792: move timer node out of bus
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
The timer node does not have any register properties and thus shouldn't be
placed on the bus.
This problem is flagged by the compiler as follows:
$ make dtbs W=1
...
DTC arch/arm/boot/dts/r8a7792-wheat.dtb
arch/arm/boot/dts/r8a7792-blanche.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm/boot/dts/r8a7792-wheat.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7792.dtsi | 20 ++++++++------------
1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index b0013e5fcf47..fa3f848dc368 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -137,18 +137,6 @@
resets = <&cpg 407>;
};
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_LOW)>;
- };
-
rst: reset-controller at e6160000 {
compatible = "renesas,r8a7792-rst";
reg = <0 0xe6160000 0 0x0100>;
@@ -856,4 +844,12 @@
#power-domain-cells = <0>;
};
};
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
};
--
2.11.0
^ permalink raw reply related
* [PATCH 17/37] ARM: dts: r8a7792: sort root sub-nodes alphabetically
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
Sort root sub-nodes alphabetically to allow for easier maintenance
of this file.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7792.dtsi | 48 +++++++++++++++++++++---------------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 7b394273031e..b0013e5fcf47 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -36,6 +36,14 @@
vin5 = &vin5;
};
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -69,6 +77,22 @@
};
};
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@@ -832,28 +856,4 @@
#power-domain-cells = <0>;
};
};
-
- /* External root clock */
- extal_clk: extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /* External SCIF clock */
- scif_clk: scif {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /* External CAN clock */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
};
--
2.11.0
^ permalink raw reply related
* [PATCH 16/37] ARM: dts: r8a7745: move timer node out of bus
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
The timer node does not have any register properties and thus shouldn't be
placed on the bus.
This problem is flagged by the compiler as follows:
$ make dtbs W=1
...
arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
DTC arch/arm/boot/dts/r8a7745-sk-rzg1e.dtb
arch/arm/boot/dts/r8a7745-sk-rzg1e.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7745.dtsi | 20 ++++++++------------
1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 8fa919a7476d..2be7485c4efe 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -247,18 +247,6 @@
resets = <&cpg 407>;
};
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_LOW)>;
- };
-
cmt0: timer at ffca0000 {
compatible = "renesas,r8a7745-cmt0",
"renesas,rcar-gen2-cmt0";
@@ -1255,6 +1243,14 @@
};
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
/* External USB clock - can be overridden by the board */
usb_extal_clk: usb_extal {
compatible = "fixed-clock";
--
2.11.0
^ permalink raw reply related
* [PATCH 15/37] ARM: dts: r8a7745: sort root sub-nodes alphabetically
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
Sort root sub-nodes alphabetically to allow for easier maintenance
of this file.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7745.dtsi | 48 +++++++++++++++++++++---------------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 668e644815eb..8fa919a7476d 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -35,6 +35,14 @@
vin1 = &vin1;
};
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -67,6 +75,22 @@
};
};
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@@ -1231,34 +1255,10 @@
};
};
- /* External root clock */
- extal_clk: extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
/* External USB clock - can be overridden by the board */
usb_extal_clk: usb_extal {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <48000000>;
};
-
- /* External CAN clock */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /* External SCIF clock */
- scif_clk: scif {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
};
--
2.11.0
^ permalink raw reply related
* [PATCH 14/37] ARM: dts: r8a7745: Add CMT SoC specific support
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Add CMT[01] support to SoC DT.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index b46043567a1e..668e644815eb 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -235,6 +235,38 @@
IRQ_TYPE_LEVEL_LOW)>;
};
+ cmt0: timer at ffca0000 {
+ compatible = "renesas,r8a7745-cmt0",
+ "renesas,rcar-gen2-cmt0";
+ reg = <0 0xffca0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ cmt1: timer at e6130000 {
+ compatible = "renesas,r8a7745-cmt1",
+ "renesas,rcar-gen2-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 329>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 329>;
+ status = "disabled";
+ };
+
cpg: clock-controller at e6150000 {
compatible = "renesas,r8a7745-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
--
2.11.0
^ permalink raw reply related
* [PATCH 13/37] ARM: dts: r8a7743: Add CMT SoC specific support
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Add CMT[01] support to SoC DT.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743.dtsi | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index acf9ce2e4057..f24f36d50e40 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -294,6 +294,38 @@
IRQ_TYPE_LEVEL_LOW)>;
};
+ cmt0: timer at ffca0000 {
+ compatible = "renesas,r8a7743-cmt0",
+ "renesas,rcar-gen2-cmt0";
+ reg = <0 0xffca0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ cmt1: timer at e6130000 {
+ compatible = "renesas,r8a7743-cmt1",
+ "renesas,rcar-gen2-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 329>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 329>;
+ status = "disabled";
+ };
+
cpg: clock-controller at e6150000 {
compatible = "renesas,r8a7743-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
--
2.11.0
^ permalink raw reply related
* [PATCH 12/37] ARM: dts: r8a7745: Add TPU support
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Add TPU support to SoC DT.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 173d8a2cc6e2..b46043567a1e 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -1006,6 +1006,16 @@
status = "disabled";
};
+ tpu: pwm at e60f0000 {
+ compatible = "renesas,tpu-r8a7745", "renesas,tpu";
+ reg = <0 0xe60f0000 0 0x148>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
sdhi0: sd at ee100000 {
compatible = "renesas,sdhi-r8a7745",
"renesas,rcar-gen2-sdhi";
--
2.11.0
^ permalink raw reply related
* [PATCH 11/37] ARM: dts: r8a7745: Add PWM SoC support
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Add the definitions for pwm[0123456] to the SoC .dtsi.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 70 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 0fa78612746f..173d8a2cc6e2 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -936,6 +936,76 @@
status = "disabled";
};
+ pwm0: pwm at e6e30000 {
+ compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm at e6e31000 {
+ compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm at e6e32000 {
+ compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm at e6e33000 {
+ compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm at e6e34000 {
+ compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm at e6e35000 {
+ compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm at e6e36000 {
+ compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
sdhi0: sd at ee100000 {
compatible = "renesas,sdhi-r8a7745",
"renesas,rcar-gen2-sdhi";
--
2.11.0
^ permalink raw reply related
* [PATCH 10/37] ARM: dts: r8a7743: Add thermal device to DT
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Biju Das <biju.das@bp.renesas.com>
This patch instantiates the thermal sensor module with thermal-zone
support.
This patch is based on the commit cac68a56e34b
("ARM: dts: r8a7791: enable to use thermal-zone") by Kuninori Morimoto.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743.dtsi | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index fcdf620d6637..acf9ce2e4057 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -250,6 +250,38 @@
resets = <&cpg 407>;
};
+ thermal: thermal at e61f0000 {
+ compatible = "renesas,thermal-r8a7743",
+ "renesas,rcar-gen2-thermal",
+ "renesas,rcar-thermal";
+ reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu-crit {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
--
2.11.0
^ permalink raw reply related
* [PATCH 09/37] ARM: dts: r8a7743: Add TPU support
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Add TPU support to SoC DT.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 758887494cb9..fcdf620d6637 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -1088,6 +1088,16 @@
status = "disabled";
};
+ tpu: pwm at e60f0000 {
+ compatible = "renesas,tpu-r8a7743", "renesas,tpu";
+ reg = <0 0xe60f0000 0 0x148>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
sdhi0: sd at ee100000 {
compatible = "renesas,sdhi-r8a7743",
"renesas,rcar-gen2-sdhi";
--
2.11.0
^ permalink raw reply related
* [PATCH 08/37] ARM: dts: r8a7743: Add PWM SoC support
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Add the definitions for pwm[0123456] to the SoC .dtsi.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743.dtsi | 70 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 59860c8ef362..758887494cb9 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -1018,6 +1018,76 @@
status = "disabled";
};
+ pwm0: pwm at e6e30000 {
+ compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm at e6e31000 {
+ compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm at e6e32000 {
+ compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm at e6e33000 {
+ compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm at e6e34000 {
+ compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm at e6e35000 {
+ compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm at e6e36000 {
+ compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
sdhi0: sd at ee100000 {
compatible = "renesas,sdhi-r8a7743",
"renesas,rcar-gen2-sdhi";
--
2.11.0
^ permalink raw reply related
* [PATCH 07/37] ARM: dts: r8a7793: Correct critical CPU temperature
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Chris Paterson <chris.paterson2@renesas.com>
The R-Car M2N hardware manual states that Tc = ?40?C to +105?C. The
thermal sensor has an accuracy of ?5?C and there can be a temperature
difference of 1 or 2 degrees between Tjmax and the thermal sensor due
to the location of the latter.
This means that 95?C is a safer value to use.
Fixes: 57f9156bc620ac56 ("ARM: dts: r8a7793: enable to use thermal-zone")
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index a83c2e9c5723..dbc62e61940d 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -89,7 +89,7 @@
trips {
cpu-crit {
- temperature = <115000>;
+ temperature = <95000>;
hysteresis = <0>;
type = "critical";
};
--
2.11.0
^ permalink raw reply related
* [PATCH 06/37] ARM: dts: r8a7791: Correct critical CPU temperature
From: Simon Horman @ 2017-12-22 10:29 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>
From: Chris Paterson <chris.paterson2@renesas.com>
The R-Car M2W hardware manual states that Tc = ?40?C to +105?C. The
thermal sensor has an accuracy of ?5?C and there can be a temperature
difference of 1 or 2 degrees between Tjmax and the thermal sensor due
to the location of the latter.
This means that 95?C is a safer value to use.
Fixes: cac68a56e34b9810 ("ARM: dts: r8a7791: enable to use thermal-zone")
Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index dfc1c406179f..008a260f86a5 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -92,7 +92,7 @@
trips {
cpu-crit {
- temperature = <115000>;
+ temperature = <95000>;
hysteresis = <0>;
type = "critical";
};
--
2.11.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox