* [PATCH v2 3/3] rtc: stm32: add stm32mp1 rtc support
From: Amelie Delaunay @ 2018-05-09 15:46 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525880770-22263-1-git-send-email-amelie.delaunay@st.com>
This patch adds support for stm32mp1 RTC.
Some common registers with previous RTC version have a different offset.
It is the case for Control Register (CR) and ALaRMA Register (ALRMAR).
There are also new registers regarding event flags: now, Alarm event flag
is in Status Register (SR) and write 1 in Status Clear Register (SCR) is
required to clear the event.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
drivers/rtc/rtc-stm32.c | 88 +++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 81 insertions(+), 7 deletions(-)
diff --git a/drivers/rtc/rtc-stm32.c b/drivers/rtc/rtc-stm32.c
index 52ee027..45e0175 100644
--- a/drivers/rtc/rtc-stm32.c
+++ b/drivers/rtc/rtc-stm32.c
@@ -11,6 +11,7 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/pm_wakeirq.h>
#include <linux/regmap.h>
#include <linux/rtc.h>
@@ -39,7 +40,7 @@
#define STM32_RTC_CR_ALRAE BIT(8)
#define STM32_RTC_CR_ALRAIE BIT(12)
-/* STM32_RTC_ISR bit fields */
+/* STM32_RTC_ISR/STM32_RTC_ICSR bit fields */
#define STM32_RTC_ISR_ALRAWF BIT(0)
#define STM32_RTC_ISR_INITS BIT(4)
#define STM32_RTC_ISR_RSF BIT(5)
@@ -71,11 +72,22 @@
#define STM32_RTC_ALRMXR_WDAY GENMASK(27, 24)
#define STM32_RTC_ALRMXR_DATE_MASK BIT(31)
+/* STM32_RTC_SR/_SCR bit fields */
+#define STM32_RTC_SR_ALRA BIT(0)
+
+/* STM32_RTC_VERR bit fields */
+#define STM32_RTC_VERR_MINREV_SHIFT 0
+#define STM32_RTC_VERR_MINREV GENMASK(3, 0)
+#define STM32_RTC_VERR_MAJREV_SHIFT 4
+#define STM32_RTC_VERR_MAJREV GENMASK(7, 4)
+
/* STM32_RTC_WPR key constants */
#define RTC_WPR_1ST_KEY 0xCA
#define RTC_WPR_2ND_KEY 0x53
#define RTC_WPR_WRONG_KEY 0xFF
+#define UNDEF_REG ~0
+
struct stm32_rtc;
struct stm32_rtc_registers {
@@ -86,6 +98,9 @@ struct stm32_rtc_registers {
u8 prer;
u8 alrmar;
u8 wpr;
+ u8 sr;
+ u8 scr;
+ u16 verr;
};
struct stm32_rtc_events {
@@ -98,6 +113,7 @@ struct stm32_rtc_data {
void (*clear_events)(struct stm32_rtc *rtc, unsigned int flags);
bool has_pclk;
bool need_dbp;
+ bool has_wakeirq;
};
struct stm32_rtc {
@@ -110,6 +126,7 @@ struct stm32_rtc {
struct clk *rtc_ck;
const struct stm32_rtc_data *data;
int irq_alarm;
+ int wakeirq_alarm;
};
static void stm32_rtc_wpr_unlock(struct stm32_rtc *rtc)
@@ -193,7 +210,7 @@ static irqreturn_t stm32_rtc_alarm_irq(int irq, void *dev_id)
mutex_lock(&rtc->rtc_dev->ops_lock);
- status = readl_relaxed(rtc->base + regs.isr);
+ status = readl_relaxed(rtc->base + regs.sr);
cr = readl_relaxed(rtc->base + regs.cr);
if ((status & evts.alra) &&
@@ -325,7 +342,7 @@ static int stm32_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
alrmar = readl_relaxed(rtc->base + regs.alrmar);
cr = readl_relaxed(rtc->base + regs.cr);
- status = readl_relaxed(rtc->base + regs.isr);
+ status = readl_relaxed(rtc->base + regs.sr);
if (alrmar & STM32_RTC_ALRMXR_DATE_MASK) {
/*
@@ -533,6 +550,7 @@ static void stm32_rtc_clear_events(struct stm32_rtc *rtc,
static const struct stm32_rtc_data stm32_rtc_data = {
.has_pclk = false,
.need_dbp = true,
+ .has_wakeirq = false,
.regs = {
.tr = 0x00,
.dr = 0x04,
@@ -541,6 +559,9 @@ static const struct stm32_rtc_data stm32_rtc_data = {
.prer = 0x10,
.alrmar = 0x1C,
.wpr = 0x24,
+ .sr = 0x0C, /* set to ISR offset to ease alarm management */
+ .scr = UNDEF_REG,
+ .verr = UNDEF_REG,
},
.events = {
.alra = STM32_RTC_ISR_ALRAF,
@@ -551,6 +572,7 @@ static const struct stm32_rtc_data stm32_rtc_data = {
static const struct stm32_rtc_data stm32h7_rtc_data = {
.has_pclk = true,
.need_dbp = true,
+ .has_wakeirq = false,
.regs = {
.tr = 0x00,
.dr = 0x04,
@@ -559,6 +581,9 @@ static const struct stm32_rtc_data stm32h7_rtc_data = {
.prer = 0x10,
.alrmar = 0x1C,
.wpr = 0x24,
+ .sr = 0x0C, /* set to ISR offset to ease alarm management */
+ .scr = UNDEF_REG,
+ .verr = UNDEF_REG,
},
.events = {
.alra = STM32_RTC_ISR_ALRAF,
@@ -566,9 +591,41 @@ static const struct stm32_rtc_data stm32h7_rtc_data = {
.clear_events = stm32_rtc_clear_events,
};
+static void stm32mp1_rtc_clear_events(struct stm32_rtc *rtc,
+ unsigned int flags)
+{
+ struct stm32_rtc_registers regs = rtc->data->regs;
+
+ /* Flags are cleared by writing 1 in RTC_SCR */
+ writel_relaxed(flags, rtc->base + regs.scr);
+}
+
+static const struct stm32_rtc_data stm32mp1_data = {
+ .has_pclk = true,
+ .need_dbp = false,
+ .has_wakeirq = true,
+ .regs = {
+ .tr = 0x00,
+ .dr = 0x04,
+ .cr = 0x18,
+ .isr = 0x0C, /* named RTC_ICSR on stm32mp1 */
+ .prer = 0x10,
+ .alrmar = 0x40,
+ .wpr = 0x24,
+ .sr = 0x50,
+ .scr = 0x5C,
+ .verr = 0x3F4,
+ },
+ .events = {
+ .alra = STM32_RTC_SR_ALRA,
+ },
+ .clear_events = stm32mp1_rtc_clear_events,
+};
+
static const struct of_device_id stm32_rtc_of_match[] = {
{ .compatible = "st,stm32-rtc", .data = &stm32_rtc_data },
{ .compatible = "st,stm32h7-rtc", .data = &stm32h7_rtc_data },
+ { .compatible = "st,stm32mp1-rtc", .data = &stm32mp1_data },
{}
};
MODULE_DEVICE_TABLE(of, stm32_rtc_of_match);
@@ -727,12 +784,19 @@ static int stm32_rtc_probe(struct platform_device *pdev)
goto err;
}
- platform_set_drvdata(pdev, rtc);
-
ret = device_init_wakeup(&pdev->dev, true);
+ if (rtc->data->has_wakeirq) {
+ rtc->wakeirq_alarm = platform_get_irq(pdev, 1);
+ if (rtc->wakeirq_alarm <= 0)
+ ret = rtc->wakeirq_alarm;
+ else
+ ret = dev_pm_set_dedicated_wake_irq(&pdev->dev,
+ rtc->wakeirq_alarm);
+ }
if (ret)
- dev_warn(&pdev->dev,
- "alarm won't be able to wake up the system");
+ dev_warn(&pdev->dev, "alarm can't wake up the system: %d", ret);
+
+ platform_set_drvdata(pdev, rtc);
rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
&stm32_rtc_ops, THIS_MODULE);
@@ -760,6 +824,14 @@ static int stm32_rtc_probe(struct platform_device *pdev)
if (!(readl_relaxed(rtc->base + regs.isr) & STM32_RTC_ISR_INITS))
dev_warn(&pdev->dev, "Date/Time must be initialized\n");
+ if (regs.verr != UNDEF_REG) {
+ u32 ver = readl_relaxed(rtc->base + regs.verr);
+
+ dev_info(&pdev->dev, "registered rev:%d.%d\n",
+ (ver >> STM32_RTC_VERR_MAJREV_SHIFT) & 0xF,
+ (ver >> STM32_RTC_VERR_MINREV_SHIFT) & 0xF);
+ }
+
return 0;
err:
if (rtc->data->has_pclk)
@@ -769,6 +841,7 @@ static int stm32_rtc_probe(struct platform_device *pdev)
if (rtc->data->need_dbp)
regmap_update_bits(rtc->dbp, rtc->dbp_reg, rtc->dbp_mask, 0);
+ dev_pm_clear_wake_irq(&pdev->dev);
device_init_wakeup(&pdev->dev, false);
return ret;
@@ -795,6 +868,7 @@ static int stm32_rtc_remove(struct platform_device *pdev)
if (rtc->data->need_dbp)
regmap_update_bits(rtc->dbp, rtc->dbp_reg, rtc->dbp_mask, 0);
+ dev_pm_clear_wake_irq(&pdev->dev);
device_init_wakeup(&pdev->dev, false);
return 0;
--
2.7.4
^ permalink raw reply related
* [PATCH 3/3] x86/mm: disable ioremap free page handling on x86-PAE
From: Kani, Toshi @ 2018-05-09 15:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180430175925.2657-4-toshi.kani@hpe.com>
On Mon, 2018-04-30 at 11:59 -0600, Toshi Kani wrote:
> ioremap() supports pmd mappings on x86-PAE. However, kernel's pmd
> tables are not shared among processes on x86-PAE. Therefore, any
> update to sync'd pmd entries need re-syncing. Freeing a pte page
> also leads to a vmalloc fault and hits the BUG_ON in vmalloc_sync_one().
>
> Disable free page handling on x86-PAE. pud_free_pmd_page() and
> pmd_free_pte_page() simply return 0 if a given pud/pmd entry is present.
> This assures that ioremap() does not update sync'd pmd entries at the
> cost of falling back to pte mappings.
>
> Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces")
> Reported-by: Joerg Roedel <joro@8bytes.org>
Hi Joerg,
Does it solve your problem? Let me know if you have any issue with the
series.
Thanks,
-Toshi
^ permalink raw reply
* [PATCH v2 1/2] perf cs-etm: Support unknown_thread in cs_etm_auxtrace
From: Mathieu Poirier @ 2018-05-09 15:51 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525839312-20544-1-git-send-email-leo.yan@linaro.org>
On Wed, May 09, 2018 at 12:15:11PM +0800, Leo Yan wrote:
> CoreSight doesn't allocate thread structure for unknown_thread in etm
> auxtrace, so unknown_thread is NULL pointer. If the perf data doesn't
> contain valid tid and then cs_etm__mem_access() uses unknown_thread
> instead as thread handler, this results in segmentation fault when
> thread__find_addr_map() accesses thread handler.
>
> This commit creates new thread data which is used by unknown_thread, so
> CoreSight tracing can roll back to use unknown_thread if perf data
> doesn't include valid thread info. This commit also releases thread
> data for initialization failure case and for normal auxtrace free flow.
Hi Leo,
Arnaldo maintains the perf tools and he receives dozens of patches every day.
If his name is not the first one to appear on the "To:" list, it is unlikely
that his email filters will catch your patches.
Mathieu
>
> Signed-off-by: Leo Yan <leo.yan@linaro.org>
> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> ---
> tools/perf/util/cs-etm.c | 24 ++++++++++++++++++++++--
> 1 file changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
> index 6533b1a..69f21de 100644
> --- a/tools/perf/util/cs-etm.c
> +++ b/tools/perf/util/cs-etm.c
> @@ -239,6 +239,7 @@ static void cs_etm__free(struct perf_session *session)
> for (i = 0; i < aux->num_cpu; i++)
> zfree(&aux->metadata[i]);
>
> + thread__zput(aux->unknown_thread);
> zfree(&aux->metadata);
> zfree(&aux);
> }
> @@ -1355,6 +1356,23 @@ int cs_etm__process_auxtrace_info(union perf_event *event,
> etm->auxtrace.free = cs_etm__free;
> session->auxtrace = &etm->auxtrace;
>
> + etm->unknown_thread = thread__new(999999999, 999999999);
> + if (!etm->unknown_thread)
> + goto err_free_queues;
> +
> + /*
> + * Initialize list node so that at thread__zput() we can avoid
> + * segmentation fault at list_del_init().
> + */
> + INIT_LIST_HEAD(&etm->unknown_thread->node);
> +
> + err = thread__set_comm(etm->unknown_thread, "unknown", 0);
> + if (err)
> + goto err_delete_thread;
> +
> + if (thread__init_map_groups(etm->unknown_thread, etm->machine))
> + goto err_delete_thread;
> +
> if (dump_trace) {
> cs_etm__print_auxtrace_info(auxtrace_info->priv, num_cpu);
> return 0;
> @@ -1369,16 +1387,18 @@ int cs_etm__process_auxtrace_info(union perf_event *event,
>
> err = cs_etm__synth_events(etm, session);
> if (err)
> - goto err_free_queues;
> + goto err_delete_thread;
>
> err = auxtrace_queues__process_index(&etm->queues, session);
> if (err)
> - goto err_free_queues;
> + goto err_delete_thread;
>
> etm->data_queued = etm->queues.populated;
>
> return 0;
>
> +err_delete_thread:
> + thread__zput(etm->unknown_thread);
> err_free_queues:
> auxtrace_queues__free(&etm->queues);
> session->auxtrace = NULL;
> --
> 2.7.4
>
^ permalink raw reply
* [PATCH v2 01/26] drm/bridge: allow optionally specifying an owner .odev device
From: Peter Rosin @ 2018-05-09 15:53 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <4e92fdea-0609-0fff-0e3f-d9f78f596eb7@samsung.com>
On 2018-05-09 17:08, Andrzej Hajda wrote:
> On 04.05.2018 15:51, Peter Rosin wrote:
>> Bridge drivers can now (temporarily, in a transition phase) select if
>> they want to provide a full owner device or keep just providing an
>> of_node.
>>
>> By providing a full owner device, the bridge drivers no longer need
>> to provide an of_node since that node is available via the owner
>> device.
>>
>> When all bridge drivers provide an owner device, that will become
>> mandatory and the .of_node member will be removed.
>>
>> Signed-off-by: Peter Rosin <peda@axentia.se>
>> ---
>> drivers/gpu/drm/drm_bridge.c | 3 ++-
>> drivers/gpu/drm/rockchip/rockchip_lvds.c | 4 +++-
>
> What is the reason to put rockchip here? Shouldn't be in separate patch?
Because the rockchip driver peeks into the bridge struct and all the
changes in this patch relate to making the new .odev member optional in
the transition phase, when the bridge can have either a new-style odev
or an old style of_node.
I guess this rockchip change could be patch 2, but it has to come first
after this patch and it makes no sense on its own. Hence, one patch.
This rockchip_lvds interaction is also present in patch 24/26
drm/bridge: remove the .of_node member
I can split them if you want, but I personally don't see the point.
>> include/drm/drm_bridge.h | 2 ++
>> 3 files changed, 7 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
>> index 1638bfe9627c..3872f5379998 100644
>> --- a/drivers/gpu/drm/drm_bridge.c
>> +++ b/drivers/gpu/drm/drm_bridge.c
>> @@ -365,7 +365,8 @@ struct drm_bridge *of_drm_find_bridge(struct device_node *np)
>> mutex_lock(&bridge_lock);
>>
>> list_for_each_entry(bridge, &bridge_list, list) {
>> - if (bridge->of_node == np) {
>> + if ((bridge->odev && bridge->odev->of_node == np) ||
>> + bridge->of_node == np) {
>> mutex_unlock(&bridge_lock);
>> return bridge;
>> }
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_lvds.c b/drivers/gpu/drm/rockchip/rockchip_lvds.c
>> index 4bd94b167d2c..557e0079c98d 100644
>> --- a/drivers/gpu/drm/rockchip/rockchip_lvds.c
>> +++ b/drivers/gpu/drm/rockchip/rockchip_lvds.c
>> @@ -377,8 +377,10 @@ static int rockchip_lvds_bind(struct device *dev, struct device *master,
>> }
>> if (lvds->panel)
>> remote = lvds->panel->dev->of_node;
>> - else
>> + else if (lvds->bridge->of_node)
>> remote = lvds->bridge->of_node;
>> + else
>> + remote = lvds->bridge->odev->of_node;
>
> I guess odev should be NULL here, or have I missed something.
s/should/could/ ???
Assuming that was what you meant and answering accordingly...
No, .odev cannot be NULL in that else branch. drm_of_find_panel_or_bridge
either found a panel or a bridge (or it failed). If it found a bridge
(which is the relevant branch for this question) that bridge would have
to have either an of_node (in the transition phase) or a valid .odev.
Otherwise the bridge could not have been found by
drm_of_find_panel_or_bridge.
*time passes*
Ahh, yes, .odev is always NULL here so you probably did mean "should".
But after patches 2-23 when bridges start populating .odev *instead*
of .of_node, .odev will not remain NULL. But as I said above, while
.odev is NULL, .of_node will never be NULL and vice versa (or
drm_of_find_panel_or_bridge could not have found the bridge) so there
is no risk of a NULL dereference.
Cheers,
Peter
>
> Regards
> Andrzej
>
>> if (of_property_read_string(dev->of_node, "rockchip,output", &name))
>> /* default set it as output rgb */
>> lvds->output = DISPLAY_OUTPUT_RGB;
>> diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
>> index 3270fec46979..7c17977c3537 100644
>> --- a/include/drm/drm_bridge.h
>> +++ b/include/drm/drm_bridge.h
>> @@ -254,6 +254,7 @@ struct drm_bridge_timings {
>>
>> /**
>> * struct drm_bridge - central DRM bridge control structure
>> + * @odev: device that owns the bridge
>> * @dev: DRM device this bridge belongs to
>> * @encoder: encoder to which this bridge is connected
>> * @next: the next bridge in the encoder chain
>> @@ -265,6 +266,7 @@ struct drm_bridge_timings {
>> * @driver_private: pointer to the bridge driver's internal context
>> */
>> struct drm_bridge {
>> + struct device *odev;
>> struct drm_device *dev;
>> struct drm_encoder *encoder;
>> struct drm_bridge *next;
>
>
^ permalink raw reply
* [PATCH 1/4] amba: Export amba_bustype
From: Robin Murphy @ 2018-05-09 16:02 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180509154055.GB25559@xps15>
On 09/05/18 16:40, Mathieu Poirier wrote:
> On Wed, May 09, 2018 at 02:38:32PM +0100, Robin Murphy wrote:
>> Hi Kim,
>>
>> On 08/05/18 20:06, Kim Phillips wrote:
>>> This patch is provided in the context of allowing the Coresight driver
>>> subsystem to be loaded as modules. Coresight uses amba_bus in its call
>>> to bus_find_device() in of_coresight_get_endpoint_device() when
>>> searching for a configurable endpoint device. This patch allows
>>> Coresight to reference amba_bustype when built as a module.
>>>
>>> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
>>> Cc: Alex Williamson <alex.williamson@redhat.com>
>>> Cc: Eric Auger <eric.auger@redhat.com>
>>> Cc: Russell King <linux@armlinux.org.uk>
>>> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>> Cc: Todd Kjos <tkjos@google.com>
>>> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
>>> Cc: Thierry Reding <treding@nvidia.com>
>>> Cc: Robin Murphy <robin.murphy@arm.com>
>>> Signed-off-by: Kim Phillips <kim.phillips@arm.com>
>>> ---
>>> There was a prior patch submitted by Alex W. here:
>>>
>>> https://lkml.org/lkml/2017/6/19/811
>>>
>>> But I can't tell its fate - presume simply delayed?
>>>
>>> Coresight uses amba_bus in its call to bus_find_device() here:
>>>
>>> https://lxr.missinglinkelectronics.com/linux/drivers/hwtracing/coresight/of_coresight.c#L51
>>>
>>> Grepping for bus_type and EXPORT shows other busses exporting their
>>> type, so I don't think this is the wrong approach. If, OTOH, Coresight
>>> needs to do something differently, please comment.
>>
>> Exposing raw bus_types is pretty ugly, but it is indeed the status quo, so
>> this probably is the reasonable thing to do. I suppose an amba_bus
>> equivalent of of_find_device_by_node() could be implemented, but for only a
>> single potential user that doesn't seem particularly worthwhile, since
>> unless some massive shake-up of how buses work comes along the bus_type will
>> inevitably end up being exported for other reasons anyway. So, in the
>> context of this series;
>>
>> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
>>
>> However, as a wild idea for sidestepping the issue completely (or at least
>> keeping it within the CoreSight framework), at first glance it appears
>> something like the below might be feasible, although I may well be missing
>> some obvious reason why not.
>>
>> Thanks,
>> Robin.
>>
>> ----->8-----
>> diff --git a/drivers/hwtracing/coresight/of_coresight.c
>> b/drivers/hwtracing/coresight/of_coresight.c
>> index 7c375443ede6..2c3fdc9b63e6 100644
>> --- a/drivers/hwtracing/coresight/of_coresight.c
>> +++ b/drivers/hwtracing/coresight/of_coresight.c
>> @@ -27,28 +27,13 @@
>>
>> static int of_dev_node_match(struct device *dev, void *data)
>> {
>> - return dev->of_node == data;
>> + return dev->parent->of_node == data;
>> }
>>
>> static struct device *
>> of_coresight_get_endpoint_device(struct device_node *endpoint)
>> {
>> - struct device *dev = NULL;
>> -
>> - /*
>> - * If we have a non-configurable replicator, it will be found on the
>> - * platform bus.
>> - */
>> - dev = bus_find_device(&platform_bus_type, NULL,
>> - endpoint, of_dev_node_match);
>> - if (dev)
>> - return dev;
>> -
>> - /*
>> - * We have a configurable component - circle through the AMBA bus
>> - * looking for the device that matches the endpoint node.
>> - */
>> - return bus_find_device(&amba_bustype, NULL,
>> + return bus_find_device(&coresight_bustype, NULL,
>> endpoint, of_dev_node_match);
>> }
>
> Hi Robin and thanks for the input.
>
> Your approach would work if all CS devices would be on the CS bus, which is not
> the case at discovery time when of_coresight_get_endpoint_device() is called.
Ah, now I see that obvious thing I was indeed missing - I got mixed up
and started thinking bus_add_device() only got called as part of driver
probe, but of course it's actually much earlier in
{platform,amba}_device_add(). That means my idea cannot in fact work at
all, since both ends of any link would defer waiting for the other to
probe (and thus call coresight_register()) first. Oh well, I guess
poking amba_bustype really does remain the only reasonable answer.
Thanks,
Robin.
^ permalink raw reply
* [PATCH] drivers/perf: arm-ccn: stop spamming dmesg in event_init
From: Pawel Moll @ 2018-05-09 16:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180508184050.75c60b82ba538d0ecdeb2d78@arm.com>
On Wed, 2018-05-09 at 00:40 +0100, Kim Phillips wrote:
> On Fri, 4 May 2018 11:41:17 +0100 Mark Rutland <mark.rutland@arm.com> wrote:
>
> [adding Pawel, arm-ccn driver author]
We had this discussion way too many times for my liking. As I said
before - *I* will be fine with the debug messages in the CCN driver.
Now, if there ever turns out to be other user of this thing and gets
into problems with event configuration, I'd hope that he/she can count
on support from the knowledgable people here... (just checked and both
RHEL 7.5 and Ubuntu 16.04.3 kernels on AArch64 come with
CONFIG_DYNAMIC_DEBUG=y, so it's a matter of explaining what has to be
enabled where; sadly this information did not find its way into the
commit description)
> > The ARM CCN PMU driver uses dev_warn() to complain about parameters
> in
> > the user-provided perf_event_attr. This means that under normal
> > operation (e.g. a single invocation of the perf tool), dmesg may be
> > spammed with multiple messages.
Surely Mark, in his role as maintainer of drivers/perf/ (and a few
other locations), meant to use much more technical and emotion-free
subject, along the lines of "reduce a number of dmesg warnings at event
init".
Regards
Pawe?
^ permalink raw reply
* [PATCH] drivers/perf: arm-ccn: stop spamming dmesg in event_init
From: Mark Rutland @ 2018-05-09 16:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882003.4199.55.camel@arm.com>
On Wed, May 09, 2018 at 05:06:43PM +0100, Pawel Moll wrote:
> On Wed, 2018-05-09 at 00:40 +0100, Kim Phillips wrote:
> > On Fri, 4 May 2018 11:41:17 +0100 Mark Rutland <mark.rutland@arm.com> wrote:
> >
> > [adding Pawel, arm-ccn driver author]
>
> We had this discussion way too many times for my liking. As I said
> before - *I* will be fine with the debug messages in the CCN driver.
> > > The ARM CCN PMU driver uses dev_warn() to complain about parameters
> > in
> > > the user-provided perf_event_attr. This means that under normal
> > > operation (e.g. a single invocation of the perf tool), dmesg may be
> > > spammed with multiple messages.
>
> Surely Mark, in his role as maintainer of drivers/perf/ (and a few
> other locations), meant to use much more technical and emotion-free
> subject, along the lines of "reduce a number of dmesg warnings at event
> init".
True. I'll reword the above to:
The ARM CCN PMU driver uses dev_warn() to complain about parameters in
the user-provided perf_event_attr. This means that under normal
operation (e.g. a single invocation of the perf tool), a number of
messages warnings may be logged to dmesg.
... with that, can I take your ack?
Thanks,
Mark.
^ permalink raw reply
* [PATCH v7 00/16] KVM: arm64: Optimise FPSIMD context switching
From: Dave Martin @ 2018-05-09 16:12 UTC (permalink / raw)
To: linux-arm-kernel
Note: Most of these patches are Arm-specific. People not Cc'd on the
whole series can find it in the linux-arm-kernel archive [2].
This series aims to improve the way FPSIMD context is handled by KVM.
Only minor changes have been made since the previous v6 [1], though
this posting does apply a couple of fixes.
The changes are summarised in the individual patches.
Reviewers please note:
* Patch 6 is new, and does some minor refactoring to help fix an SVE
context switching issue on the host, observed during stress-testing
of v6 on an SVE-enabled model (the actual fix, using this
refactoring, is incorporated in patch 8).
* Patch 8 is missing Reviewed-bys/Acked-bys (thanks Marc, but I
stripped yours in the end due to nontrivial changes. Reviewer
attention on these patches would be much appreciated.
Some testing done on Juno and the Arm fast model (arm64), including
combinations of (non-)SVE and (non-)VHE configurations.
Cheers
---Dave
[1] [PATCH v6 00/15] KVM: arm64: Optimise FPSIMD context switching
http://lists.infradead.org/pipermail/linux-arm-kernel/2018-May/576355.html
[2] linux-arm-kernel archive
http://lists.infradead.org/pipermail/linux-arm-kernel/2018-May/thread.html
Christoffer Dall (1):
KVM: arm/arm64: Introduce kvm_arch_vcpu_run_pid_change
Dave Martin (15):
thread_info: Add update_thread_flag() helpers
arm64: Use update{,_tsk}_thread_flag()
KVM: arm64: Convert lazy FPSIMD context switch trap to C
arm64: fpsimd: Generalise context saving for non-task contexts
arm64/sve: Refactor user SVE trap maintenance for external use
KVM: arm64: Repurpose vcpu_arch.debug_flags for general-purpose flags
KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing
arm64/sve: Move read_zcr_features() out of cpufeature.h
arm64/sve: Switch sve_pffr() argument from task to thread
arm64/sve: Move sve_pffr() to fpsimd.h and make inline
KVM: arm64: Save host SVE context as appropriate
KVM: arm64: Remove eager host SVE state saving
KVM: arm64: Remove redundant *exit_code changes in fpsimd_guest_exit()
KVM: arm64: Fold redundant exit code checks out of fixup_guest_exit()
KVM: arm64: Invoke FPSIMD context switch trap from C
arch/arm/include/asm/kvm_host.h | 9 ++-
arch/arm64/Kconfig | 7 ++
arch/arm64/include/asm/cpufeature.h | 29 -------
arch/arm64/include/asm/fpsimd.h | 21 +++++
arch/arm64/include/asm/kvm_asm.h | 3 -
arch/arm64/include/asm/kvm_host.h | 32 +++++---
arch/arm64/include/asm/processor.h | 2 +
arch/arm64/kernel/fpsimd.c | 148 ++++++++++++++++++------------------
arch/arm64/kernel/ptrace.c | 1 +
arch/arm64/kvm/Kconfig | 1 +
arch/arm64/kvm/Makefile | 2 +-
arch/arm64/kvm/debug.c | 8 +-
arch/arm64/kvm/fpsimd.c | 111 +++++++++++++++++++++++++++
arch/arm64/kvm/hyp/debug-sr.c | 6 +-
arch/arm64/kvm/hyp/entry.S | 43 -----------
arch/arm64/kvm/hyp/hyp-entry.S | 19 -----
arch/arm64/kvm/hyp/switch.c | 124 +++++++++++++++++++++---------
arch/arm64/kvm/hyp/sysreg-sr.c | 4 +-
arch/arm64/kvm/sys_regs.c | 9 +--
include/linux/kvm_host.h | 9 +++
include/linux/sched.h | 6 ++
include/linux/thread_info.h | 11 +++
virt/kvm/Kconfig | 3 +
virt/kvm/arm/arm.c | 25 +++++-
virt/kvm/kvm_main.c | 7 +-
25 files changed, 405 insertions(+), 235 deletions(-)
create mode 100644 arch/arm64/kvm/fpsimd.c
--
2.1.4
^ permalink raw reply
* [PATCH v7 01/16] thread_info: Add update_thread_flag() helpers
From: Dave Martin @ 2018-05-09 16:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
There are a number of bits of code sprinkled around the kernel to
set a thread flag if a certain condition is true, and clear it
otherwise.
To help make those call sites terser and less cumbersome, this
patch adds a new family of thread flag manipulators
update*_thread_flag([...,] flag, cond)
which do the equivalent of:
if (cond)
set*_thread_flag([...,] flag);
else
clear*_thread_flag([...,] flag);
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
---
include/linux/sched.h | 6 ++++++
include/linux/thread_info.h | 11 +++++++++++
2 files changed, 17 insertions(+)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index b3d697f..c2c3051 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1578,6 +1578,12 @@ static inline void clear_tsk_thread_flag(struct task_struct *tsk, int flag)
clear_ti_thread_flag(task_thread_info(tsk), flag);
}
+static inline void update_tsk_thread_flag(struct task_struct *tsk, int flag,
+ bool value)
+{
+ update_ti_thread_flag(task_thread_info(tsk), flag, value);
+}
+
static inline int test_and_set_tsk_thread_flag(struct task_struct *tsk, int flag)
{
return test_and_set_ti_thread_flag(task_thread_info(tsk), flag);
diff --git a/include/linux/thread_info.h b/include/linux/thread_info.h
index cf2862b..8d8821b 100644
--- a/include/linux/thread_info.h
+++ b/include/linux/thread_info.h
@@ -60,6 +60,15 @@ static inline void clear_ti_thread_flag(struct thread_info *ti, int flag)
clear_bit(flag, (unsigned long *)&ti->flags);
}
+static inline void update_ti_thread_flag(struct thread_info *ti, int flag,
+ bool value)
+{
+ if (value)
+ set_ti_thread_flag(ti, flag);
+ else
+ clear_ti_thread_flag(ti, flag);
+}
+
static inline int test_and_set_ti_thread_flag(struct thread_info *ti, int flag)
{
return test_and_set_bit(flag, (unsigned long *)&ti->flags);
@@ -79,6 +88,8 @@ static inline int test_ti_thread_flag(struct thread_info *ti, int flag)
set_ti_thread_flag(current_thread_info(), flag)
#define clear_thread_flag(flag) \
clear_ti_thread_flag(current_thread_info(), flag)
+#define update_thread_flag(flag, value) \
+ update_ti_thread_flag(current_thread_info(), flag, value)
#define test_and_set_thread_flag(flag) \
test_and_set_ti_thread_flag(current_thread_info(), flag)
#define test_and_clear_thread_flag(flag) \
--
2.1.4
^ permalink raw reply related
* [PATCH v7 02/16] arm64: Use update{,_tsk}_thread_flag()
From: Dave Martin @ 2018-05-09 16:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
This patch uses the new update_thread_flag() helpers to simplify a
couple of if () set; else clear; constructs.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
arch/arm64/kernel/fpsimd.c | 19 +++++++------------
1 file changed, 7 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 87a3536..0c4e7e0 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -618,10 +618,8 @@ int sve_set_vector_length(struct task_struct *task,
task->thread.sve_vl = vl;
out:
- if (flags & PR_SVE_VL_INHERIT)
- set_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
- else
- clear_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
+ update_tsk_thread_flag(task, TIF_SVE_VL_INHERIT,
+ flags & PR_SVE_VL_INHERIT);
return 0;
}
@@ -902,7 +900,7 @@ void fpsimd_thread_switch(struct task_struct *next)
if (current->mm)
task_fpsimd_save();
- if (next->mm) {
+ if (next->mm)
/*
* If we are switching to a task whose most recent userland
* FPSIMD state is already in the registers of *this* cpu,
@@ -910,13 +908,10 @@ void fpsimd_thread_switch(struct task_struct *next)
* the TIF_FOREIGN_FPSTATE flag so the state will be loaded
* upon the next return to userland.
*/
- if (__this_cpu_read(fpsimd_last_state.st) ==
- &next->thread.uw.fpsimd_state
- && next->thread.fpsimd_cpu == smp_processor_id())
- clear_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE);
- else
- set_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE);
- }
+ update_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE,
+ __this_cpu_read(fpsimd_last_state.st) !=
+ &next->thread.uw.fpsimd_state ||
+ next->thread.fpsimd_cpu != smp_processor_id());
}
void fpsimd_flush_thread(void)
--
2.1.4
^ permalink raw reply related
* [PATCH v7 03/16] KVM: arm/arm64: Introduce kvm_arch_vcpu_run_pid_change
From: Dave Martin @ 2018-05-09 16:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
From: Christoffer Dall <christoffer.dall@linaro.org>
KVM/ARM differs from other architectures in having to maintain an
additional virtual address space from that of the host and the
guest, because we split the execution of KVM across both EL1 and
EL2.
This results in a need to explicitly map data structures into EL2
(hyp) which are accessed from the hyp code. As we are about to be
more clever with our FPSIMD handling on arm64, which stores data in
the task struct and uses thread_info flags, we will have to map
parts of the currently executing task struct into the EL2 virtual
address space.
However, we don't want to do this on every KVM_RUN, because it is a
fairly expensive operation to walk the page tables, and the common
execution mode is to map a single thread to a VCPU. By introducing
a hook that architectures can select with
HAVE_KVM_VCPU_RUN_PID_CHANGE, we do not introduce overhead for
other architectures, but have a simple way to only map the data we
need when required for arm64.
This patch introduces the framework only, and wires it up in the
arm/arm64 KVM common code.
No functional change.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
---
include/linux/kvm_host.h | 9 +++++++++
virt/kvm/Kconfig | 3 +++
virt/kvm/kvm_main.c | 7 ++++++-
3 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 6930c63..4268ace 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -1276,4 +1276,13 @@ static inline long kvm_arch_vcpu_async_ioctl(struct file *filp,
void kvm_arch_mmu_notifier_invalidate_range(struct kvm *kvm,
unsigned long start, unsigned long end);
+#ifdef CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE
+int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu);
+#else
+static inline int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
+{
+ return 0;
+}
+#endif /* CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE */
+
#endif
diff --git a/virt/kvm/Kconfig b/virt/kvm/Kconfig
index cca7e06..72143cf 100644
--- a/virt/kvm/Kconfig
+++ b/virt/kvm/Kconfig
@@ -54,3 +54,6 @@ config HAVE_KVM_IRQ_BYPASS
config HAVE_KVM_VCPU_ASYNC_IOCTL
bool
+
+config HAVE_KVM_VCPU_RUN_PID_CHANGE
+ bool
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index c7b2e92..c32e240 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2550,8 +2550,13 @@ static long kvm_vcpu_ioctl(struct file *filp,
oldpid = rcu_access_pointer(vcpu->pid);
if (unlikely(oldpid != current->pids[PIDTYPE_PID].pid)) {
/* The thread running this VCPU changed. */
- struct pid *newpid = get_task_pid(current, PIDTYPE_PID);
+ struct pid *newpid;
+ r = kvm_arch_vcpu_run_pid_change(vcpu);
+ if (r)
+ break;
+
+ newpid = get_task_pid(current, PIDTYPE_PID);
rcu_assign_pointer(vcpu->pid, newpid);
if (oldpid)
synchronize_rcu();
--
2.1.4
^ permalink raw reply related
* [PATCH v7 04/16] KVM: arm64: Convert lazy FPSIMD context switch trap to C
From: Dave Martin @ 2018-05-09 16:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
To make the lazy FPSIMD context switch trap code easier to hack on,
this patch converts it to C.
This is not amazingly efficient, but the trap should typically only
be taken once per host context switch.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/kvm/hyp/entry.S | 57 +++++++++++++++++----------------------------
arch/arm64/kvm/hyp/switch.c | 24 +++++++++++++++++++
2 files changed, 46 insertions(+), 35 deletions(-)
diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
index e41a161..40f349b 100644
--- a/arch/arm64/kvm/hyp/entry.S
+++ b/arch/arm64/kvm/hyp/entry.S
@@ -172,40 +172,27 @@ ENTRY(__fpsimd_guest_restore)
// x1: vcpu
// x2-x29,lr: vcpu regs
// vcpu x0-x1 on the stack
- stp x2, x3, [sp, #-16]!
- stp x4, lr, [sp, #-16]!
-
-alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
- mrs x2, cptr_el2
- bic x2, x2, #CPTR_EL2_TFP
- msr cptr_el2, x2
-alternative_else
- mrs x2, cpacr_el1
- orr x2, x2, #CPACR_EL1_FPEN
- msr cpacr_el1, x2
-alternative_endif
- isb
-
- mov x3, x1
-
- ldr x0, [x3, #VCPU_HOST_CONTEXT]
- kern_hyp_va x0
- add x0, x0, #CPU_GP_REG_OFFSET(CPU_FP_REGS)
- bl __fpsimd_save_state
-
- add x2, x3, #VCPU_CONTEXT
- add x0, x2, #CPU_GP_REG_OFFSET(CPU_FP_REGS)
- bl __fpsimd_restore_state
-
- // Skip restoring fpexc32 for AArch64 guests
- mrs x1, hcr_el2
- tbnz x1, #HCR_RW_SHIFT, 1f
- ldr x4, [x3, #VCPU_FPEXC32_EL2]
- msr fpexc32_el2, x4
-1:
- ldp x4, lr, [sp], #16
- ldp x2, x3, [sp], #16
- ldp x0, x1, [sp], #16
-
+ stp x2, x3, [sp, #-144]!
+ stp x4, x5, [sp, #16]
+ stp x6, x7, [sp, #32]
+ stp x8, x9, [sp, #48]
+ stp x10, x11, [sp, #64]
+ stp x12, x13, [sp, #80]
+ stp x14, x15, [sp, #96]
+ stp x16, x17, [sp, #112]
+ stp x18, lr, [sp, #128]
+
+ bl __hyp_switch_fpsimd
+
+ ldp x4, x5, [sp, #16]
+ ldp x6, x7, [sp, #32]
+ ldp x8, x9, [sp, #48]
+ ldp x10, x11, [sp, #64]
+ ldp x12, x13, [sp, #80]
+ ldp x14, x15, [sp, #96]
+ ldp x16, x17, [sp, #112]
+ ldp x18, lr, [sp, #128]
+ ldp x0, x1, [sp, #144]
+ ldp x2, x3, [sp], #160
eret
ENDPROC(__fpsimd_guest_restore)
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index d964523..c0796c4 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -318,6 +318,30 @@ static bool __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
}
}
+void __hyp_text __hyp_switch_fpsimd(u64 esr __always_unused,
+ struct kvm_vcpu *vcpu)
+{
+ kvm_cpu_context_t *host_ctxt;
+
+ if (has_vhe())
+ write_sysreg(read_sysreg(cpacr_el1) | CPACR_EL1_FPEN,
+ cpacr_el1);
+ else
+ write_sysreg(read_sysreg(cptr_el2) & ~(u64)CPTR_EL2_TFP,
+ cptr_el2);
+
+ isb();
+
+ host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context);
+ __fpsimd_save_state(&host_ctxt->gp_regs.fp_regs);
+ __fpsimd_restore_state(&vcpu->arch.ctxt.gp_regs.fp_regs);
+
+ /* Skip restoring fpexc32 for AArch64 guests */
+ if (!(read_sysreg(hcr_el2) & HCR_RW))
+ write_sysreg(vcpu->arch.ctxt.sys_regs[FPEXC32_EL2],
+ fpexc32_el2);
+}
+
/*
* Return true when we were able to fixup the guest exit and should return to
* the guest, false when we should restore the host state and return to the
--
2.1.4
^ permalink raw reply related
* [PATCH v7 05/16] arm64: fpsimd: Generalise context saving for non-task contexts
From: Dave Martin @ 2018-05-09 16:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
In preparation for allowing non-task (i.e., KVM vcpu) FPSIMD
contexts to be handled by the fpsimd common code, this patch adapts
task_fpsimd_save() to save back the currently loaded context,
removing the explicit dependency on current.
The relevant storage to write back to in memory is now found by
examining the fpsimd_last_state percpu struct.
fpsimd_save() does nothing unless TIF_FOREIGN_FPSTATE is clear, and
fpsimd_last_state is updated under local_bh_disable() or
local_irq_disable() everywhere that TIF_FOREIGN_FPSTATE is cleared:
thus, fpsimd_save() will write back to the correct storage for the
loaded context.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/kernel/fpsimd.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 0c4e7e0..5fc0595 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -270,13 +270,15 @@ static void task_fpsimd_load(void)
}
/*
- * Ensure current's FPSIMD/SVE storage in thread_struct is up to date
- * with respect to the CPU registers.
+ * Ensure FPSIMD/SVE storage in memory for the loaded context is up to
+ * date with respect to the CPU registers.
*
* Softirqs (and preemption) must be disabled.
*/
-static void task_fpsimd_save(void)
+static void fpsimd_save(void)
{
+ struct user_fpsimd_state *st = __this_cpu_read(fpsimd_last_state.st);
+
WARN_ON(!in_softirq() && !irqs_disabled());
if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
@@ -291,10 +293,9 @@ static void task_fpsimd_save(void)
return;
}
- sve_save_state(sve_pffr(current),
- ¤t->thread.uw.fpsimd_state.fpsr);
+ sve_save_state(sve_pffr(current), &st->fpsr);
} else
- fpsimd_save_state(¤t->thread.uw.fpsimd_state);
+ fpsimd_save_state(st);
}
}
@@ -598,7 +599,7 @@ int sve_set_vector_length(struct task_struct *task,
if (task == current) {
local_bh_disable();
- task_fpsimd_save();
+ fpsimd_save();
set_thread_flag(TIF_FOREIGN_FPSTATE);
}
@@ -837,7 +838,7 @@ asmlinkage void do_sve_acc(unsigned int esr, struct pt_regs *regs)
local_bh_disable();
- task_fpsimd_save();
+ fpsimd_save();
fpsimd_to_sve(current);
/* Force ret_to_user to reload the registers: */
@@ -898,7 +899,7 @@ void fpsimd_thread_switch(struct task_struct *next)
* 'current'.
*/
if (current->mm)
- task_fpsimd_save();
+ fpsimd_save();
if (next->mm)
/*
@@ -977,7 +978,7 @@ void fpsimd_preserve_current_state(void)
return;
local_bh_disable();
- task_fpsimd_save();
+ fpsimd_save();
local_bh_enable();
}
@@ -1117,7 +1118,7 @@ void kernel_neon_begin(void)
/* Save unsaved task fpsimd state, if any: */
if (current->mm) {
- task_fpsimd_save();
+ fpsimd_save();
set_thread_flag(TIF_FOREIGN_FPSTATE);
}
@@ -1242,7 +1243,7 @@ static int fpsimd_cpu_pm_notifier(struct notifier_block *self,
switch (cmd) {
case CPU_PM_ENTER:
if (current->mm)
- task_fpsimd_save();
+ fpsimd_save();
fpsimd_flush_cpu_state();
break;
case CPU_PM_EXIT:
--
2.1.4
^ permalink raw reply related
* [PATCH v7 06/16] arm64/sve: Refactor user SVE trap maintenance for external use
From: Dave Martin @ 2018-05-09 16:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
In preparation for optimising the way KVM manages switching the
guest and host FPSIMD state, it is necessary to provide a means for
code outside arch/arm64/kernel/fpsimd.c to restore the user trap
configuration for SVE correctly for the current task.
Rather than requiring external code to duplicate the maintenance
explicitly, this patch wraps moves the trap maintenenace to
fpsimd_bind_to_cpu(), since it is logically part of the work of
associating the current task with the cpu.
Because fpsimd_bind_to_cpu() is rather a cryptic name to publish
alongside fpsimd_bind_state_to_cpu(), the former function is
renamed to fpsimd_bind_task_to_cpu() to make its purpose more
explicit.
This patch makes appropriate changes to ensure that
fpsimd_bind_task_to_cpu() is always called alongside
task_fpsimd_load(), so that the trap maintenance continues to be
done in every situation where it was done prior to this patch.
As a side-effect, the metadata updates done by
fpsimd_bind_task_to_cpu() now change from conditional to
unconditional in the "already bound" case of sigreturn. This is
harmless, and a couple of extra stores on this slow path will not
impact performance. I consider this a reasonable price to pay for
a slightly cleaner interface.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---
arch/arm64/kernel/fpsimd.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 5fc0595..60404eb 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -257,16 +257,6 @@ static void task_fpsimd_load(void)
sve_vq_from_vl(current->thread.sve_vl) - 1);
else
fpsimd_load_state(¤t->thread.uw.fpsimd_state);
-
- if (system_supports_sve()) {
- /* Toggle SVE trapping for userspace if needed */
- if (test_thread_flag(TIF_SVE))
- sve_user_enable();
- else
- sve_user_disable();
-
- /* Serialised by exception return to user */
- }
}
/*
@@ -998,7 +988,7 @@ void fpsimd_signal_preserve_current_state(void)
* Associate current's FPSIMD context with this cpu
* Preemption must be disabled when calling this function.
*/
-static void fpsimd_bind_to_cpu(void)
+static void fpsimd_bind_task_to_cpu(void)
{
struct fpsimd_last_state_struct *last =
this_cpu_ptr(&fpsimd_last_state);
@@ -1006,6 +996,16 @@ static void fpsimd_bind_to_cpu(void)
last->st = ¤t->thread.uw.fpsimd_state;
last->sve_in_use = test_thread_flag(TIF_SVE);
current->thread.fpsimd_cpu = smp_processor_id();
+
+ if (system_supports_sve()) {
+ /* Toggle SVE trapping for userspace if needed */
+ if (test_thread_flag(TIF_SVE))
+ sve_user_enable();
+ else
+ sve_user_disable();
+
+ /* Serialised by exception return to user */
+ }
}
/*
@@ -1022,7 +1022,7 @@ void fpsimd_restore_current_state(void)
if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) {
task_fpsimd_load();
- fpsimd_bind_to_cpu();
+ fpsimd_bind_task_to_cpu();
}
local_bh_enable();
@@ -1045,9 +1045,9 @@ void fpsimd_update_current_state(struct user_fpsimd_state const *state)
fpsimd_to_sve(current);
task_fpsimd_load();
+ fpsimd_bind_task_to_cpu();
- if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE))
- fpsimd_bind_to_cpu();
+ clear_thread_flag(TIF_FOREIGN_FPSTATE);
local_bh_enable();
}
--
2.1.4
^ permalink raw reply related
* [PATCH v7 07/16] KVM: arm64: Repurpose vcpu_arch.debug_flags for general-purpose flags
From: Dave Martin @ 2018-05-09 16:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
In struct vcpu_arch, the debug_flags field is used to store
debug-related flags about the vcpu state.
Since we are about to add some more flags related to FPSIMD and
SVE, it makes sense to add them to the existing flags field rather
than adding new fields. Since there is only one debug_flags flag
defined so far, there is plenty of free space for expansion.
In preparation for adding more flags, this patch renames the
debug_flags field to simply "flags", and updates comments
appropriately.
The flag definitions are also moved to <asm/kvm_host.h>, since
their presence in <asm/kvm_asm.h> was for purely historical
reasons: these definitions are not used from asm any more, and not
very likely to be as more Hyp asm is migrated to C.
KVM_ARM64_DEBUG_DIRTY_SHIFT has not been used since commit
1ea66d27e7b0 ("arm64: KVM: Move away from the assembly version of
the world switch"), so this patch gets rid of that too.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
---
Changes since v6:
* Move vcpu_arch flags definitions to kvm_host.h.
These are not used from asm any more, so it makes sense for them to be
defined alongside the relevant structure field.
(Commit message updated to reflect this change.)
---
arch/arm64/include/asm/kvm_asm.h | 3 ---
arch/arm64/include/asm/kvm_host.h | 7 +++++--
arch/arm64/kvm/debug.c | 8 ++++----
arch/arm64/kvm/hyp/debug-sr.c | 6 +++---
arch/arm64/kvm/hyp/sysreg-sr.c | 4 ++--
arch/arm64/kvm/sys_regs.c | 9 ++++-----
6 files changed, 18 insertions(+), 19 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
index f6648a3..f62ccbf 100644
--- a/arch/arm64/include/asm/kvm_asm.h
+++ b/arch/arm64/include/asm/kvm_asm.h
@@ -30,9 +30,6 @@
/* The hyp-stub will return this for any kvm_call_hyp() call */
#define ARM_EXCEPTION_HYP_GONE HVC_STUB_ERR
-#define KVM_ARM64_DEBUG_DIRTY_SHIFT 0
-#define KVM_ARM64_DEBUG_DIRTY (1 << KVM_ARM64_DEBUG_DIRTY_SHIFT)
-
/* Translate a kernel address of @sym into its equivalent linear mapping */
#define kvm_ksym_ref(sym) \
({ \
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 469de8a..146c167 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -216,8 +216,8 @@ struct kvm_vcpu_arch {
/* Exception Information */
struct kvm_vcpu_fault_info fault;
- /* Guest debug state */
- u64 debug_flags;
+ /* Miscellaneous vcpu state flags */
+ u64 flags;
/*
* We maintain more than a single set of debug registers to support
@@ -293,6 +293,9 @@ struct kvm_vcpu_arch {
bool sysregs_loaded_on_cpu;
};
+/* vcpu_arch flags field values: */
+#define KVM_ARM64_DEBUG_DIRTY (1 << 0)
+
#define vcpu_gp_regs(v) (&(v)->arch.ctxt.gp_regs)
/*
diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
index a1f4ebd..00d4223 100644
--- a/arch/arm64/kvm/debug.c
+++ b/arch/arm64/kvm/debug.c
@@ -103,7 +103,7 @@ void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu)
*
* Additionally, KVM only traps guest accesses to the debug registers if
* the guest is not actively using them (see the KVM_ARM64_DEBUG_DIRTY
- * flag on vcpu->arch.debug_flags). Since the guest must not interfere
+ * flag on vcpu->arch.flags). Since the guest must not interfere
* with the hardware state when debugging the guest, we must ensure that
* trapping is enabled whenever we are debugging the guest using the
* debug registers.
@@ -111,7 +111,7 @@ void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu)
void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
{
- bool trap_debug = !(vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY);
+ bool trap_debug = !(vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY);
unsigned long mdscr;
trace_kvm_arm_setup_debug(vcpu, vcpu->guest_debug);
@@ -184,7 +184,7 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1);
vcpu->arch.debug_ptr = &vcpu->arch.external_debug_state;
- vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
+ vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY;
trap_debug = true;
trace_kvm_arm_set_regset("BKPTS", get_num_brps(),
@@ -206,7 +206,7 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
/* If KDE or MDE are set, perform a full save/restore cycle. */
if (vcpu_read_sys_reg(vcpu, MDSCR_EL1) & (DBG_MDSCR_KDE | DBG_MDSCR_MDE))
- vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
+ vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY;
trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2);
trace_kvm_arm_set_dreg32("MDSCR_EL1", vcpu_read_sys_reg(vcpu, MDSCR_EL1));
diff --git a/arch/arm64/kvm/hyp/debug-sr.c b/arch/arm64/kvm/hyp/debug-sr.c
index 3e717f6..5000976 100644
--- a/arch/arm64/kvm/hyp/debug-sr.c
+++ b/arch/arm64/kvm/hyp/debug-sr.c
@@ -163,7 +163,7 @@ void __hyp_text __debug_switch_to_guest(struct kvm_vcpu *vcpu)
if (!has_vhe())
__debug_save_spe_nvhe(&vcpu->arch.host_debug_state.pmscr_el1);
- if (!(vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY))
+ if (!(vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY))
return;
host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context);
@@ -185,7 +185,7 @@ void __hyp_text __debug_switch_to_host(struct kvm_vcpu *vcpu)
if (!has_vhe())
__debug_restore_spe_nvhe(vcpu->arch.host_debug_state.pmscr_el1);
- if (!(vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY))
+ if (!(vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY))
return;
host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context);
@@ -196,7 +196,7 @@ void __hyp_text __debug_switch_to_host(struct kvm_vcpu *vcpu)
__debug_save_state(vcpu, guest_dbg, guest_ctxt);
__debug_restore_state(vcpu, host_dbg, host_ctxt);
- vcpu->arch.debug_flags &= ~KVM_ARM64_DEBUG_DIRTY;
+ vcpu->arch.flags &= ~KVM_ARM64_DEBUG_DIRTY;
}
u32 __hyp_text __kvm_get_mdcr_el2(void)
diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c b/arch/arm64/kvm/hyp/sysreg-sr.c
index b3894df..35bc168 100644
--- a/arch/arm64/kvm/hyp/sysreg-sr.c
+++ b/arch/arm64/kvm/hyp/sysreg-sr.c
@@ -196,7 +196,7 @@ void __hyp_text __sysreg32_save_state(struct kvm_vcpu *vcpu)
sysreg[DACR32_EL2] = read_sysreg(dacr32_el2);
sysreg[IFSR32_EL2] = read_sysreg(ifsr32_el2);
- if (has_vhe() || vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY)
+ if (has_vhe() || vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY)
sysreg[DBGVCR32_EL2] = read_sysreg(dbgvcr32_el2);
}
@@ -218,7 +218,7 @@ void __hyp_text __sysreg32_restore_state(struct kvm_vcpu *vcpu)
write_sysreg(sysreg[DACR32_EL2], dacr32_el2);
write_sysreg(sysreg[IFSR32_EL2], ifsr32_el2);
- if (has_vhe() || vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY)
+ if (has_vhe() || vcpu->arch.flags & KVM_ARM64_DEBUG_DIRTY)
write_sysreg(sysreg[DBGVCR32_EL2], dbgvcr32_el2);
}
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 6e3b969..a436373 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -31,7 +31,6 @@
#include <asm/debug-monitors.h>
#include <asm/esr.h>
#include <asm/kvm_arm.h>
-#include <asm/kvm_asm.h>
#include <asm/kvm_coproc.h>
#include <asm/kvm_emulate.h>
#include <asm/kvm_host.h>
@@ -338,7 +337,7 @@ static bool trap_debug_regs(struct kvm_vcpu *vcpu,
{
if (p->is_write) {
vcpu_write_sys_reg(vcpu, p->regval, r->reg);
- vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
+ vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY;
} else {
p->regval = vcpu_read_sys_reg(vcpu, r->reg);
}
@@ -369,7 +368,7 @@ static void reg_to_dbg(struct kvm_vcpu *vcpu,
}
*dbg_reg = val;
- vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
+ vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY;
}
static void dbg_to_reg(struct kvm_vcpu *vcpu,
@@ -1441,7 +1440,7 @@ static bool trap_debug32(struct kvm_vcpu *vcpu,
{
if (p->is_write) {
vcpu_cp14(vcpu, r->reg) = p->regval;
- vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
+ vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY;
} else {
p->regval = vcpu_cp14(vcpu, r->reg);
}
@@ -1473,7 +1472,7 @@ static bool trap_xvr(struct kvm_vcpu *vcpu,
val |= p->regval << 32;
*dbg_reg = val;
- vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
+ vcpu->arch.flags |= KVM_ARM64_DEBUG_DIRTY;
} else {
p->regval = *dbg_reg >> 32;
}
--
2.1.4
^ permalink raw reply related
* [PATCH v7 08/16] KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing
From: Dave Martin @ 2018-05-09 16:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
This patch refactors KVM to align the host and guest FPSIMD
save/restore logic with each other for arm64. This reduces the
number of redundant save/restore operations that must occur, and
reduces the common-case IRQ blackout time during guest exit storms
by saving the host state lazily and optimising away the need to
restore the host state before returning to the run loop.
Four hooks are defined in order to enable this:
* kvm_arch_vcpu_run_map_fp():
Called on PID change to map necessary bits of current to Hyp.
* kvm_arch_vcpu_load_fp():
Set up FP/SIMD for entering the KVM run loop (parse as
"vcpu_load fp").
* kvm_arch_vcpu_ctxsync_fp():
Get FP/SIMD into a safe state for re-enabling interrupts after a
guest exit back to the run loop.
For arm64 specifically, this involves updating the host kernel's
FPSIMD context tracking metadata so that kernel-mode NEON use
will cause the vcpu's FPSIMD state to be saved back correctly
into the vcpu struct. This must be done before re-enabling
interrupts because kernel-mode NEON may be used by softirqs.
* kvm_arch_vcpu_put_fp():
Save guest FP/SIMD state back to memory and dissociate from the
CPU ("vcpu_put fp").
Also, the arm64 FPSIMD context switch code is updated to enable it
to save back FPSIMD state for a vcpu, not just current. A few
helpers drive this:
* fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp):
mark this CPU as having context fp (which may belong to a vcpu)
currently loaded in its registers. This is the non-task
equivalent of the static function fpsimd_bind_to_cpu() in
fpsimd.c.
* task_fpsimd_save():
exported to allow KVM to save the guest's FPSIMD state back to
memory on exit from the run loop.
* fpsimd_flush_state():
invalidate any context's FPSIMD state that is currently loaded.
Used to disassociate the vcpu from the CPU regs on run loop exit.
These changes allow the run loop to enable interrupts (and thus
softirqs that may use kernel-mode NEON) without having to save the
guest's FPSIMD state eagerly.
Some new vcpu_arch fields are added to make all this work. Because
host FPSIMD state can now be saved back directly into current's
thread_struct as appropriate, host_cpu_context is no longer used
for preserving the FPSIMD state. However, it is still needed for
preserving other things such as the host's system registers. To
avoid ABI churn, the redundant storage space in host_cpu_context is
not removed for now.
arch/arm is not addressed by this patch and continues to use its
current save/restore logic. It could provide implementations of
the helpers later if desired.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
---
Dropped Reviewed-bys due to non-trivial changes.
Changes since v6:
* Don't define kvm_arch_vcpu_run_pid_change() unless CONFIG_KVM=y.
<asm/kvm_host.h> may be used for its declarations even with
CONFIG_KVM=n (e.g., in asm-offsets.c).
This patch avoids conflicts with the core headers in this config.
* Rebind current's FP state to the cpu in vcpu_put() if it is
still loaded, to ensure that the SVE trapping setup for userspace is
properly restored.
Requested by Marc Zyngier:
* Add a comment to explain the purpose of update_fp_enabled().
* Migrate vcpu_arch.flags definitions to kvm_host.h.
* Eliminate magic NULL semantics for vcpu_arch.host_fpsimd_state so
that we can just assign this pointer once in the pid_change hook.
A new flag KVM_ARM64_FP_HOST flag is added to capture the former
semantics of vcpu->arch.host_fpsimd_state != NULL.
---
arch/arm/include/asm/kvm_host.h | 8 +++
arch/arm64/include/asm/fpsimd.h | 6 ++
arch/arm64/include/asm/kvm_host.h | 21 +++++++
arch/arm64/kernel/fpsimd.c | 17 +++++-
arch/arm64/kvm/Kconfig | 1 +
arch/arm64/kvm/Makefile | 2 +-
arch/arm64/kvm/fpsimd.c | 112 ++++++++++++++++++++++++++++++++++++++
arch/arm64/kvm/hyp/switch.c | 51 +++++++++--------
virt/kvm/arm/arm.c | 4 ++
9 files changed, 192 insertions(+), 30 deletions(-)
create mode 100644 arch/arm64/kvm/fpsimd.c
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index c7c28c8..4cac8d1 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -303,6 +303,14 @@ int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr);
+/*
+ * VFP/NEON switching is all done by the hyp switch code, so no need to
+ * coordinate with host context handling for this state:
+ */
+static inline void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu) {}
+static inline void kvm_arch_vcpu_park_fp(struct kvm_vcpu *vcpu) {}
+static inline void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu) {}
+
/* All host FP/SIMD state is restored on guest exit, so nothing to save: */
static inline void kvm_fpsimd_flush_cpu_state(void) {}
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index aa7162a..3e00f70 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -41,6 +41,8 @@ struct task_struct;
extern void fpsimd_save_state(struct user_fpsimd_state *state);
extern void fpsimd_load_state(struct user_fpsimd_state *state);
+extern void fpsimd_save(void);
+
extern void fpsimd_thread_switch(struct task_struct *next);
extern void fpsimd_flush_thread(void);
@@ -49,7 +51,11 @@ extern void fpsimd_preserve_current_state(void);
extern void fpsimd_restore_current_state(void);
extern void fpsimd_update_current_state(struct user_fpsimd_state const *state);
+extern void fpsimd_bind_task_to_cpu(void);
+extern void fpsimd_bind_state_to_cpu(struct user_fpsimd_state *state);
+
extern void fpsimd_flush_task_state(struct task_struct *target);
+extern void fpsimd_flush_cpu_state(void);
extern void sve_flush_cpu_state(void);
/* Maximum VL that SVE VL-agnostic software can transparently support */
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 146c167..b3fe730 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -30,6 +30,7 @@
#include <asm/kvm.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_mmio.h>
+#include <asm/thread_info.h>
#define __KVM_HAVE_ARCH_INTC_INITIALIZED
@@ -238,6 +239,10 @@ struct kvm_vcpu_arch {
/* Pointer to host CPU context */
kvm_cpu_context_t *host_cpu_context;
+
+ struct thread_info *host_thread_info; /* hyp VA */
+ struct user_fpsimd_state *host_fpsimd_state; /* hyp VA */
+
struct {
/* {Break,watch}point registers */
struct kvm_guest_debug_arch regs;
@@ -295,6 +300,9 @@ struct kvm_vcpu_arch {
/* vcpu_arch flags field values: */
#define KVM_ARM64_DEBUG_DIRTY (1 << 0)
+#define KVM_ARM64_FP_ENABLED (1 << 1) /* guest FP regs loaded */
+#define KVM_ARM64_FP_HOST (1 << 2) /* host FP regs loaded */
+#define KVM_ARM64_HOST_SVE_IN_USE (1 << 3) /* backup for host TIF_SVE */
#define vcpu_gp_regs(v) (&(v)->arch.ctxt.gp_regs)
@@ -423,6 +431,19 @@ static inline void __cpu_init_stage2(void)
"PARange is %d bits, unsupported configuration!", parange);
}
+/* Guest/host FPSIMD coordination helpers */
+int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu);
+void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu);
+void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu);
+void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu);
+
+#ifdef CONFIG_KVM /* Avoid conflicts with core headers if CONFIG_KVM=n */
+static inline int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
+{
+ return kvm_arch_vcpu_run_map_fp(vcpu);
+}
+#endif
+
/*
* All host FP/SIMD state is restored on guest exit, so nothing needs
* doing here except in the SVE case:
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 60404eb..bc2892a 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -265,7 +265,7 @@ static void task_fpsimd_load(void)
*
* Softirqs (and preemption) must be disabled.
*/
-static void fpsimd_save(void)
+void fpsimd_save(void)
{
struct user_fpsimd_state *st = __this_cpu_read(fpsimd_last_state.st);
@@ -988,7 +988,7 @@ void fpsimd_signal_preserve_current_state(void)
* Associate current's FPSIMD context with this cpu
* Preemption must be disabled when calling this function.
*/
-static void fpsimd_bind_task_to_cpu(void)
+void fpsimd_bind_task_to_cpu(void)
{
struct fpsimd_last_state_struct *last =
this_cpu_ptr(&fpsimd_last_state);
@@ -1008,6 +1008,17 @@ static void fpsimd_bind_task_to_cpu(void)
}
}
+void fpsimd_bind_state_to_cpu(struct user_fpsimd_state *st)
+{
+ struct fpsimd_last_state_struct *last =
+ this_cpu_ptr(&fpsimd_last_state);
+
+ WARN_ON(!in_softirq() && !irqs_disabled());
+
+ last->st = st;
+ last->sve_in_use = false;
+}
+
/*
* Load the userland FPSIMD state of 'current' from memory, but only if the
* FPSIMD state already held in the registers is /not/ the most recent FPSIMD
@@ -1060,7 +1071,7 @@ void fpsimd_flush_task_state(struct task_struct *t)
t->thread.fpsimd_cpu = NR_CPUS;
}
-static inline void fpsimd_flush_cpu_state(void)
+void fpsimd_flush_cpu_state(void)
{
__this_cpu_write(fpsimd_last_state.st, NULL);
}
diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
index a2e3a5a..47b23bf 100644
--- a/arch/arm64/kvm/Kconfig
+++ b/arch/arm64/kvm/Kconfig
@@ -39,6 +39,7 @@ config KVM
select HAVE_KVM_IRQ_ROUTING
select IRQ_BYPASS_MANAGER
select HAVE_KVM_IRQ_BYPASS
+ select HAVE_KVM_VCPU_RUN_PID_CHANGE
---help---
Support hosting virtualized guest machines.
We don't support KVM with 16K page tables yet, due to the multiple
diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile
index 93afff9..0f2a135 100644
--- a/arch/arm64/kvm/Makefile
+++ b/arch/arm64/kvm/Makefile
@@ -19,7 +19,7 @@ kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/psci.o $(KVM)/arm/perf.o
kvm-$(CONFIG_KVM_ARM_HOST) += inject_fault.o regmap.o va_layout.o
kvm-$(CONFIG_KVM_ARM_HOST) += hyp.o hyp-init.o handle_exit.o
kvm-$(CONFIG_KVM_ARM_HOST) += guest.o debug.o reset.o sys_regs.o sys_regs_generic_v8.o
-kvm-$(CONFIG_KVM_ARM_HOST) += vgic-sys-reg-v3.o
+kvm-$(CONFIG_KVM_ARM_HOST) += vgic-sys-reg-v3.o fpsimd.o
kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/aarch32.o
kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic/vgic.o
diff --git a/arch/arm64/kvm/fpsimd.c b/arch/arm64/kvm/fpsimd.c
new file mode 100644
index 0000000..cdd78a77
--- /dev/null
+++ b/arch/arm64/kvm/fpsimd.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/arm64/kvm/fpsimd.c: Guest/host FPSIMD context coordination helpers
+ *
+ * Copyright 2018 Arm Limited
+ * Author: Dave Martin <Dave.Martin@arm.com>
+ */
+#include <linux/bottom_half.h>
+#include <linux/sched.h>
+#include <linux/thread_info.h>
+#include <linux/kvm_host.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_host.h>
+#include <asm/kvm_mmu.h>
+
+/*
+ * Called on entry to KVM_RUN unless this vcpu previously ran at least
+ * once and the most recent prior KVM_RUN for this vcpu was called from
+ * the same task as current (highly likely).
+ *
+ * This is guaranteed to execute before kvm_arch_vcpu_load_fp(vcpu),
+ * such that on entering hyp the relevant parts of current are already
+ * mapped.
+ */
+int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu)
+{
+ int ret;
+
+ struct thread_info *ti = ¤t->thread_info;
+ struct user_fpsimd_state *fpsimd = ¤t->thread.uw.fpsimd_state;
+
+ /*
+ * Make sure the host task thread flags and fpsimd state are
+ * visible to hyp:
+ */
+ ret = create_hyp_mappings(ti, ti + 1, PAGE_HYP);
+ if (ret)
+ goto error;
+
+ ret = create_hyp_mappings(fpsimd, fpsimd + 1, PAGE_HYP);
+ if (ret)
+ goto error;
+
+ vcpu->arch.host_thread_info = kern_hyp_va(ti);
+ vcpu->arch.host_fpsimd_state = kern_hyp_va(fpsimd);
+error:
+ return ret;
+}
+
+/*
+ * Prepare vcpu for saving the host's FPSIMD state and loading the guest's.
+ * The actual loading is done by the FPSIMD access trap taken to hyp.
+ *
+ * Here, we just set the correct metadata to indicate that the FPSIMD
+ * state in the cpu regs (if any) belongs to current on the host.
+ *
+ * TIF_SVE is backed up here, since it may get clobbered with guest state.
+ * This flag is restored by kvm_arch_vcpu_put_fp(vcpu).
+ */
+void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu)
+{
+ BUG_ON(system_supports_sve());
+ BUG_ON(!current->mm);
+
+ vcpu->arch.flags &= ~(KVM_ARM64_FP_ENABLED | KVM_ARM64_HOST_SVE_IN_USE);
+ vcpu->arch.flags |= KVM_ARM64_FP_HOST;
+ if (test_thread_flag(TIF_SVE))
+ vcpu->arch.flags |= KVM_ARM64_HOST_SVE_IN_USE;
+}
+
+/*
+ * If the guest FPSIMD state was loaded, update the host's context
+ * tracking data mark the CPU FPSIMD regs as dirty for vcpu so that they
+ * will be written back if the kernel clobbers them due to kernel-mode
+ * NEON before re-entry into the guest.
+ */
+void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu)
+{
+ WARN_ON_ONCE(!irqs_disabled());
+
+ if (vcpu->arch.flags & KVM_ARM64_FP_ENABLED) {
+ fpsimd_bind_state_to_cpu(&vcpu->arch.ctxt.gp_regs.fp_regs);
+ clear_thread_flag(TIF_FOREIGN_FPSTATE);
+ clear_thread_flag(TIF_SVE);
+ }
+}
+
+/*
+ * Write back the vcpu FPSIMD regs if they are dirty, and invalidate the
+ * cpu FPSIMD regs so that they can't be spuriously reused if this vcpu
+ * disappears and another task or vcpu appears that recycles the same
+ * struct fpsimd_state.
+ */
+void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu)
+{
+ local_bh_disable();
+
+ update_thread_flag(TIF_SVE,
+ vcpu->arch.flags & KVM_ARM64_HOST_SVE_IN_USE);
+
+ if (vcpu->arch.flags & KVM_ARM64_FP_ENABLED) {
+ /* Clean guest FP state to memory and invalidate cpu view */
+ fpsimd_save();
+ fpsimd_flush_cpu_state();
+ set_thread_flag(TIF_FOREIGN_FPSTATE);
+ } else if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
+ /* Ensure user trap controls are correctly restored */
+ fpsimd_bind_task_to_cpu();
+ }
+
+ local_bh_enable();
+}
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index c0796c4..118f300 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -23,19 +23,21 @@
#include <asm/kvm_asm.h>
#include <asm/kvm_emulate.h>
+#include <asm/kvm_host.h>
#include <asm/kvm_hyp.h>
#include <asm/kvm_mmu.h>
#include <asm/fpsimd.h>
#include <asm/debug-monitors.h>
+#include <asm/thread_info.h>
-static bool __hyp_text __fpsimd_enabled_nvhe(void)
+/* Check whether the FP regs were dirtied while in the host-side run loop: */
+static bool __hyp_text update_fp_enabled(struct kvm_vcpu *vcpu)
{
- return !(read_sysreg(cptr_el2) & CPTR_EL2_TFP);
-}
+ if (vcpu->arch.host_thread_info->flags & _TIF_FOREIGN_FPSTATE)
+ vcpu->arch.flags &= ~(KVM_ARM64_FP_ENABLED |
+ KVM_ARM64_FP_HOST);
-static bool fpsimd_enabled_vhe(void)
-{
- return !!(read_sysreg(cpacr_el1) & CPACR_EL1_FPEN);
+ return !!(vcpu->arch.flags & KVM_ARM64_FP_ENABLED);
}
/* Save the 32-bit only FPSIMD system register state */
@@ -92,7 +94,10 @@ static void activate_traps_vhe(struct kvm_vcpu *vcpu)
val = read_sysreg(cpacr_el1);
val |= CPACR_EL1_TTA;
- val &= ~(CPACR_EL1_FPEN | CPACR_EL1_ZEN);
+ val &= ~CPACR_EL1_ZEN;
+ if (!update_fp_enabled(vcpu))
+ val &= ~CPACR_EL1_FPEN;
+
write_sysreg(val, cpacr_el1);
write_sysreg(kvm_get_hyp_vector(), vbar_el1);
@@ -105,7 +110,10 @@ static void __hyp_text __activate_traps_nvhe(struct kvm_vcpu *vcpu)
__activate_traps_common(vcpu);
val = CPTR_EL2_DEFAULT;
- val |= CPTR_EL2_TTA | CPTR_EL2_TFP | CPTR_EL2_TZ;
+ val |= CPTR_EL2_TTA | CPTR_EL2_TZ;
+ if (!update_fp_enabled(vcpu))
+ val |= CPTR_EL2_TFP;
+
write_sysreg(val, cptr_el2);
}
@@ -321,8 +329,6 @@ static bool __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
void __hyp_text __hyp_switch_fpsimd(u64 esr __always_unused,
struct kvm_vcpu *vcpu)
{
- kvm_cpu_context_t *host_ctxt;
-
if (has_vhe())
write_sysreg(read_sysreg(cpacr_el1) | CPACR_EL1_FPEN,
cpacr_el1);
@@ -332,14 +338,19 @@ void __hyp_text __hyp_switch_fpsimd(u64 esr __always_unused,
isb();
- host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context);
- __fpsimd_save_state(&host_ctxt->gp_regs.fp_regs);
+ if (vcpu->arch.flags & KVM_ARM64_FP_HOST) {
+ __fpsimd_save_state(vcpu->arch.host_fpsimd_state);
+ vcpu->arch.flags &= ~KVM_ARM64_FP_HOST;
+ }
+
__fpsimd_restore_state(&vcpu->arch.ctxt.gp_regs.fp_regs);
/* Skip restoring fpexc32 for AArch64 guests */
if (!(read_sysreg(hcr_el2) & HCR_RW))
write_sysreg(vcpu->arch.ctxt.sys_regs[FPEXC32_EL2],
fpexc32_el2);
+
+ vcpu->arch.flags |= KVM_ARM64_FP_ENABLED;
}
/*
@@ -418,7 +429,6 @@ int kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu)
{
struct kvm_cpu_context *host_ctxt;
struct kvm_cpu_context *guest_ctxt;
- bool fp_enabled;
u64 exit_code;
host_ctxt = vcpu->arch.host_cpu_context;
@@ -440,19 +450,14 @@ int kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu)
/* And we're baaack! */
} while (fixup_guest_exit(vcpu, &exit_code));
- fp_enabled = fpsimd_enabled_vhe();
-
sysreg_save_guest_state_vhe(guest_ctxt);
__deactivate_traps(vcpu);
sysreg_restore_host_state_vhe(host_ctxt);
- if (fp_enabled) {
- __fpsimd_save_state(&guest_ctxt->gp_regs.fp_regs);
- __fpsimd_restore_state(&host_ctxt->gp_regs.fp_regs);
+ if (vcpu->arch.flags & KVM_ARM64_FP_ENABLED)
__fpsimd_save_fpexc32(vcpu);
- }
__debug_switch_to_host(vcpu);
@@ -464,7 +469,6 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
{
struct kvm_cpu_context *host_ctxt;
struct kvm_cpu_context *guest_ctxt;
- bool fp_enabled;
u64 exit_code;
vcpu = kern_hyp_va(vcpu);
@@ -496,8 +500,6 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
/* And we're baaack! */
} while (fixup_guest_exit(vcpu, &exit_code));
- fp_enabled = __fpsimd_enabled_nvhe();
-
__sysreg_save_state_nvhe(guest_ctxt);
__sysreg32_save_state(vcpu);
__timer_disable_traps(vcpu);
@@ -508,11 +510,8 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
__sysreg_restore_state_nvhe(host_ctxt);
- if (fp_enabled) {
- __fpsimd_save_state(&guest_ctxt->gp_regs.fp_regs);
- __fpsimd_restore_state(&host_ctxt->gp_regs.fp_regs);
+ if (vcpu->arch.flags & KVM_ARM64_FP_ENABLED)
__fpsimd_save_fpexc32(vcpu);
- }
/*
* This must come after restoring the host sysregs, since a non-VHE
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index a4c1b76..bee226c 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -363,10 +363,12 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
kvm_vgic_load(vcpu);
kvm_timer_vcpu_load(vcpu);
kvm_vcpu_load_sysregs(vcpu);
+ kvm_arch_vcpu_load_fp(vcpu);
}
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
{
+ kvm_arch_vcpu_put_fp(vcpu);
kvm_vcpu_put_sysregs(vcpu);
kvm_timer_vcpu_put(vcpu);
kvm_vgic_put(vcpu);
@@ -778,6 +780,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
if (static_branch_unlikely(&userspace_irqchip_in_use))
kvm_timer_sync_hwstate(vcpu);
+ kvm_arch_vcpu_ctxsync_fp(vcpu);
+
/*
* We may have taken a host interrupt in HYP mode (ie
* while executing the guest). This interrupt is still
--
2.1.4
^ permalink raw reply related
* [PATCH v7 09/16] arm64/sve: Move read_zcr_features() out of cpufeature.h
From: Dave Martin @ 2018-05-09 16:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
Having read_zcr_features() inline in cpufeature.h results in that
header requiring #includes which make it hard to include
<asm/fpsimd.h> elsewhere without triggering header inclusion
cycles.
This is not a hot-path function and arguably should not be in
cpufeature.h in the first place, so this patch moves it to
fpsimd.c, compiled conditionally if CONFIG_ARM64_SVE=y.
This allows some SVE-related #includes to be dropped from
cpufeature.h, which will ease future maintenance.
A couple of missing #includes of <asm/fpsimd.h> are exposed by this
change under arch/arm64/. This patch adds the missing #includes as
necessary.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/include/asm/cpufeature.h | 29 -----------------------------
arch/arm64/include/asm/fpsimd.h | 2 ++
arch/arm64/include/asm/processor.h | 1 +
arch/arm64/kernel/fpsimd.c | 28 ++++++++++++++++++++++++++++
arch/arm64/kernel/ptrace.c | 1 +
5 files changed, 32 insertions(+), 29 deletions(-)
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 09b0f2a..0a6b713 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -11,9 +11,7 @@
#include <asm/cpucaps.h>
#include <asm/cputype.h>
-#include <asm/fpsimd.h>
#include <asm/hwcap.h>
-#include <asm/sigcontext.h>
#include <asm/sysreg.h>
/*
@@ -510,33 +508,6 @@ static inline bool system_supports_sve(void)
cpus_have_const_cap(ARM64_SVE);
}
-/*
- * Read the pseudo-ZCR used by cpufeatures to identify the supported SVE
- * vector length.
- *
- * Use only if SVE is present.
- * This function clobbers the SVE vector length.
- */
-static inline u64 read_zcr_features(void)
-{
- u64 zcr;
- unsigned int vq_max;
-
- /*
- * Set the maximum possible VL, and write zeroes to all other
- * bits to see if they stick.
- */
- sve_kernel_enable(NULL);
- write_sysreg_s(ZCR_ELx_LEN_MASK, SYS_ZCR_EL1);
-
- zcr = read_sysreg_s(SYS_ZCR_EL1);
- zcr &= ~(u64)ZCR_ELx_LEN_MASK; /* find sticky 1s outside LEN field */
- vq_max = sve_vq_from_vl(sve_get_vl());
- zcr |= vq_max - 1; /* set LEN field to maximum effective value */
-
- return zcr;
-}
-
#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 3e00f70..fb60b22 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -69,6 +69,8 @@ extern unsigned int sve_get_vl(void);
struct arm64_cpu_capabilities;
extern void sve_kernel_enable(const struct arm64_cpu_capabilities *__unused);
+extern u64 read_zcr_features(void);
+
extern int __ro_after_init sve_max_vl;
#ifdef CONFIG_ARM64_SVE
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 7675989..f902b6d 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -40,6 +40,7 @@
#include <asm/alternative.h>
#include <asm/cpufeature.h>
+#include <asm/fpsimd.h>
#include <asm/hw_breakpoint.h>
#include <asm/lse.h>
#include <asm/pgtable-hwdef.h>
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index bc2892a..1609a79 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -37,6 +37,7 @@
#include <linux/sched/task_stack.h>
#include <linux/signal.h>
#include <linux/slab.h>
+#include <linux/stddef.h>
#include <linux/sysctl.h>
#include <asm/esr.h>
@@ -754,6 +755,33 @@ void sve_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p)
isb();
}
+/*
+ * Read the pseudo-ZCR used by cpufeatures to identify the supported SVE
+ * vector length.
+ *
+ * Use only if SVE is present.
+ * This function clobbers the SVE vector length.
+ */
+u64 read_zcr_features(void)
+{
+ u64 zcr;
+ unsigned int vq_max;
+
+ /*
+ * Set the maximum possible VL, and write zeroes to all other
+ * bits to see if they stick.
+ */
+ sve_kernel_enable(NULL);
+ write_sysreg_s(ZCR_ELx_LEN_MASK, SYS_ZCR_EL1);
+
+ zcr = read_sysreg_s(SYS_ZCR_EL1);
+ zcr &= ~(u64)ZCR_ELx_LEN_MASK; /* find sticky 1s outside LEN field */
+ vq_max = sve_vq_from_vl(sve_get_vl());
+ zcr |= vq_max - 1; /* set LEN field to maximum effective value */
+
+ return zcr;
+}
+
void __init sve_setup(void)
{
u64 zcr;
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 7ff81fe..78889c4 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -44,6 +44,7 @@
#include <asm/compat.h>
#include <asm/cpufeature.h>
#include <asm/debug-monitors.h>
+#include <asm/fpsimd.h>
#include <asm/pgtable.h>
#include <asm/stacktrace.h>
#include <asm/syscall.h>
--
2.1.4
^ permalink raw reply related
* [PATCH v7 10/16] arm64/sve: Switch sve_pffr() argument from task to thread
From: Dave Martin @ 2018-05-09 16:12 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
sve_pffr(), which is used to derive the base address used for
low-level SVE save/restore routines, currently takes the relevant
task_struct as an argument.
The only accessed fields are actually part of thread_struct, so
this patch changes the argument type accordingly. This is done in
preparation for moving this function to a header, where we do not
want to have to include <linux/sched.h> due to the consequent
circular #include problems.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/kernel/fpsimd.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 1609a79..6e05a2b 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -44,6 +44,7 @@
#include <asm/fpsimd.h>
#include <asm/cpufeature.h>
#include <asm/cputype.h>
+#include <asm/processor.h>
#include <asm/simd.h>
#include <asm/sigcontext.h>
#include <asm/sysreg.h>
@@ -167,10 +168,9 @@ static size_t sve_ffr_offset(int vl)
return SVE_SIG_FFR_OFFSET(sve_vq_from_vl(vl)) - SVE_SIG_REGS_OFFSET;
}
-static void *sve_pffr(struct task_struct *task)
+static void *sve_pffr(struct thread_struct *thread)
{
- return (char *)task->thread.sve_state +
- sve_ffr_offset(task->thread.sve_vl);
+ return (char *)thread->sve_state + sve_ffr_offset(thread->sve_vl);
}
static void change_cpacr(u64 val, u64 mask)
@@ -253,7 +253,7 @@ static void task_fpsimd_load(void)
WARN_ON(!in_softirq() && !irqs_disabled());
if (system_supports_sve() && test_thread_flag(TIF_SVE))
- sve_load_state(sve_pffr(current),
+ sve_load_state(sve_pffr(¤t->thread),
¤t->thread.uw.fpsimd_state.fpsr,
sve_vq_from_vl(current->thread.sve_vl) - 1);
else
@@ -284,7 +284,7 @@ void fpsimd_save(void)
return;
}
- sve_save_state(sve_pffr(current), &st->fpsr);
+ sve_save_state(sve_pffr(¤t->thread), &st->fpsr);
} else
fpsimd_save_state(st);
}
--
2.1.4
^ permalink raw reply related
* [PATCH v7 11/16] arm64/sve: Move sve_pffr() to fpsimd.h and make inline
From: Dave Martin @ 2018-05-09 16:13 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
In order to make sve_save_state()/sve_load_state() more easily
reusable and to get rid of a potential branch on context switch
critical paths, this patch makes sve_pffr() inline and moves it to
fpsimd.h.
<asm/processor.h> must be included in fpsimd.h in order to make
this work, and this creates an #include cycle that is tricky to
avoid without modifying core code, due to the way the PR_SVE_*()
prctl helpers are included in the core prctl implementation.
Instead of breaking the cycle, this patch defers inclusion of
<asm/fpsimd.h> in <asm/processor.h> until the point where it is
actually needed: i.e., immediately before the prctl definitions.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/include/asm/fpsimd.h | 13 +++++++++++++
arch/arm64/include/asm/processor.h | 3 ++-
arch/arm64/kernel/fpsimd.c | 12 ------------
3 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index fb60b22..fa92747 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -18,6 +18,8 @@
#include <asm/ptrace.h>
#include <asm/errno.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
#ifndef __ASSEMBLY__
@@ -61,6 +63,17 @@ extern void sve_flush_cpu_state(void);
/* Maximum VL that SVE VL-agnostic software can transparently support */
#define SVE_VL_ARCH_MAX 0x100
+/* Offset of FFR in the SVE register dump */
+static inline size_t sve_ffr_offset(int vl)
+{
+ return SVE_SIG_FFR_OFFSET(sve_vq_from_vl(vl)) - SVE_SIG_REGS_OFFSET;
+}
+
+static inline void *sve_pffr(struct thread_struct *thread)
+{
+ return (char *)thread->sve_state + sve_ffr_offset(thread->sve_vl);
+}
+
extern void sve_save_state(void *state, u32 *pfpsr);
extern void sve_load_state(void const *state, u32 const *pfpsr,
unsigned long vq_minus_1);
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index f902b6d..ebaadb1 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -40,7 +40,6 @@
#include <asm/alternative.h>
#include <asm/cpufeature.h>
-#include <asm/fpsimd.h>
#include <asm/hw_breakpoint.h>
#include <asm/lse.h>
#include <asm/pgtable-hwdef.h>
@@ -245,6 +244,8 @@ void cpu_enable_pan(const struct arm64_cpu_capabilities *__unused);
void cpu_enable_cache_maint_trap(const struct arm64_cpu_capabilities *__unused);
void cpu_clear_disr(const struct arm64_cpu_capabilities *__unused);
+#include <asm/fpsimd.h>
+
/* Userspace interface for PR_SVE_{SET,GET}_VL prctl()s: */
#define SVE_SET_VL(arg) sve_set_current_vl(arg)
#define SVE_GET_VL() sve_get_current_vl()
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 6e05a2b..13fa681 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -161,18 +161,6 @@ static void sve_free(struct task_struct *task)
__sve_free(task);
}
-
-/* Offset of FFR in the SVE register dump */
-static size_t sve_ffr_offset(int vl)
-{
- return SVE_SIG_FFR_OFFSET(sve_vq_from_vl(vl)) - SVE_SIG_REGS_OFFSET;
-}
-
-static void *sve_pffr(struct thread_struct *thread)
-{
- return (char *)thread->sve_state + sve_ffr_offset(thread->sve_vl);
-}
-
static void change_cpacr(u64 val, u64 mask)
{
u64 cpacr = read_sysreg(CPACR_EL1);
--
2.1.4
^ permalink raw reply related
* [PATCH v7 12/16] KVM: arm64: Save host SVE context as appropriate
From: Dave Martin @ 2018-05-09 16:13 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
This patch adds SVE context saving to the hyp FPSIMD context switch
path. This means that it is no longer necessary to save the host
SVE state in advance of entering the guest, when in use.
In order to avoid adding pointless complexity to the code, VHE is
assumed if SVE is in use. VHE is an architectural prerequisite for
SVE, so there is no good reason to turn CONFIG_ARM64_VHE off in
kernels that support both SVE and KVM.
Historically, software models exist that can expose the
architecturally invalid configuration of SVE without VHE, so if
this situation is detected at kvm_init() time then KVM will be
disabled.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/Kconfig | 7 +++++++
arch/arm64/kvm/fpsimd.c | 1 -
arch/arm64/kvm/hyp/switch.c | 20 +++++++++++++++++++-
virt/kvm/arm/arm.c | 18 ++++++++++++++++++
4 files changed, 44 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index eb2cf49..b0d3820 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1130,6 +1130,7 @@ endmenu
config ARM64_SVE
bool "ARM Scalable Vector Extension support"
default y
+ depends on !KVM || ARM64_VHE
help
The Scalable Vector Extension (SVE) is an extension to the AArch64
execution state which complements and extends the SIMD functionality
@@ -1155,6 +1156,12 @@ config ARM64_SVE
booting the kernel. If unsure and you are not observing these
symptoms, you should assume that it is safe to say Y.
+ CPUs that support SVE are architecturally required to support the
+ Virtualization Host Extensions (VHE), so the kernel makes no
+ provision for supporting SVE alongside KVM without VHE enabled.
+ Thus, you will need to enable CONFIG_ARM64_VHE if you want to support
+ KVM in the same kernel image.
+
config ARM64_MODULE_PLTS
bool
select HAVE_MOD_ARCH_SPECIFIC
diff --git a/arch/arm64/kvm/fpsimd.c b/arch/arm64/kvm/fpsimd.c
index cdd78a77..c50a8e9 100644
--- a/arch/arm64/kvm/fpsimd.c
+++ b/arch/arm64/kvm/fpsimd.c
@@ -59,7 +59,6 @@ int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu)
*/
void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu)
{
- BUG_ON(system_supports_sve());
BUG_ON(!current->mm);
vcpu->arch.flags &= ~(KVM_ARM64_FP_ENABLED | KVM_ARM64_HOST_SVE_IN_USE);
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 118f300..a6a8c7d 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -21,6 +21,7 @@
#include <kvm/arm_psci.h>
+#include <asm/cpufeature.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_emulate.h>
#include <asm/kvm_host.h>
@@ -28,6 +29,7 @@
#include <asm/kvm_mmu.h>
#include <asm/fpsimd.h>
#include <asm/debug-monitors.h>
+#include <asm/processor.h>
#include <asm/thread_info.h>
/* Check whether the FP regs were dirtied while in the host-side run loop: */
@@ -329,6 +331,8 @@ static bool __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
void __hyp_text __hyp_switch_fpsimd(u64 esr __always_unused,
struct kvm_vcpu *vcpu)
{
+ struct user_fpsimd_state *host_fpsimd = vcpu->arch.host_fpsimd_state;
+
if (has_vhe())
write_sysreg(read_sysreg(cpacr_el1) | CPACR_EL1_FPEN,
cpacr_el1);
@@ -339,7 +343,21 @@ void __hyp_text __hyp_switch_fpsimd(u64 esr __always_unused,
isb();
if (vcpu->arch.flags & KVM_ARM64_FP_HOST) {
- __fpsimd_save_state(vcpu->arch.host_fpsimd_state);
+ /*
+ * In the SVE case, VHE is assumed: it is enforced by
+ * Kconfig and kvm_arch_init().
+ */
+ if (system_supports_sve() &&
+ (vcpu->arch.flags & KVM_ARM64_HOST_SVE_IN_USE)) {
+ struct thread_struct *thread = container_of(
+ host_fpsimd,
+ struct thread_struct, uw.fpsimd_state);
+
+ sve_save_state(sve_pffr(thread), &host_fpsimd->fpsr);
+ } else {
+ __fpsimd_save_state(host_fpsimd);
+ }
+
vcpu->arch.flags &= ~KVM_ARM64_FP_HOST;
}
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index bee226c..379e8a9 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -16,6 +16,7 @@
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
+#include <linux/bug.h>
#include <linux/cpu_pm.h>
#include <linux/errno.h>
#include <linux/err.h>
@@ -41,6 +42,7 @@
#include <asm/mman.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
+#include <asm/cpufeature.h>
#include <asm/virt.h>
#include <asm/kvm_arm.h>
#include <asm/kvm_asm.h>
@@ -1582,6 +1584,22 @@ int kvm_arch_init(void *opaque)
}
}
+ /*
+ * VHE is a prerequisite for SVE in the Arm architecture, and
+ * Kconfig ensures that if system_supports_sve() here then
+ * CONFIG_ARM64_VHE is enabled, so if VHE support wasn't already
+ * detected and enabled, the CPU is architecturally
+ * noncompliant.
+ *
+ * Just in case this mismatch is seen, detect it, warn and give
+ * up. Supporting this forbidden configuration in Hyp would be
+ * pointless.
+ */
+ if (system_supports_sve() && !has_vhe()) {
+ kvm_pr_unimpl("SVE system without VHE unsupported. Broken cpu?");
+ return -ENODEV;
+ }
+
err = init_common_resources();
if (err)
return err;
--
2.1.4
^ permalink raw reply related
* [PATCH v7 13/16] KVM: arm64: Remove eager host SVE state saving
From: Dave Martin @ 2018-05-09 16:13 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
Now that the host SVE context can be saved on demand from Hyp,
there is no longer any need to save this state in advance before
entering the guest.
This patch removes the relevant call to
kvm_fpsimd_flush_cpu_state().
Since the problem that function was intended to solve now no longer
exists, the function and its dependencies are also deleted.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm/include/asm/kvm_host.h | 3 ---
arch/arm64/include/asm/kvm_host.h | 10 ----------
arch/arm64/kernel/fpsimd.c | 21 ---------------------
virt/kvm/arm/arm.c | 3 ---
4 files changed, 37 deletions(-)
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index 4cac8d1..39f051f 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -311,9 +311,6 @@ static inline void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu) {}
static inline void kvm_arch_vcpu_park_fp(struct kvm_vcpu *vcpu) {}
static inline void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu) {}
-/* All host FP/SIMD state is restored on guest exit, so nothing to save: */
-static inline void kvm_fpsimd_flush_cpu_state(void) {}
-
static inline void kvm_arm_vhe_guest_enter(void) {}
static inline void kvm_arm_vhe_guest_exit(void) {}
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index b3fe730..2629093 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -444,16 +444,6 @@ static inline int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
}
#endif
-/*
- * All host FP/SIMD state is restored on guest exit, so nothing needs
- * doing here except in the SVE case:
-*/
-static inline void kvm_fpsimd_flush_cpu_state(void)
-{
- if (system_supports_sve())
- sve_flush_cpu_state();
-}
-
static inline void kvm_arm_vhe_guest_enter(void)
{
local_daif_mask();
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 13fa681..32898a8 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -120,7 +120,6 @@
*/
struct fpsimd_last_state_struct {
struct user_fpsimd_state *st;
- bool sve_in_use;
};
static DEFINE_PER_CPU(struct fpsimd_last_state_struct, fpsimd_last_state);
@@ -1010,7 +1009,6 @@ void fpsimd_bind_task_to_cpu(void)
this_cpu_ptr(&fpsimd_last_state);
last->st = ¤t->thread.uw.fpsimd_state;
- last->sve_in_use = test_thread_flag(TIF_SVE);
current->thread.fpsimd_cpu = smp_processor_id();
if (system_supports_sve()) {
@@ -1032,7 +1030,6 @@ void fpsimd_bind_state_to_cpu(struct user_fpsimd_state *st)
WARN_ON(!in_softirq() && !irqs_disabled());
last->st = st;
- last->sve_in_use = false;
}
/*
@@ -1092,24 +1089,6 @@ void fpsimd_flush_cpu_state(void)
__this_cpu_write(fpsimd_last_state.st, NULL);
}
-/*
- * Invalidate any task SVE state currently held in this CPU's regs.
- *
- * This is used to prevent the kernel from trying to reuse SVE register data
- * that is detroyed by KVM guest enter/exit. This function should go away when
- * KVM SVE support is implemented. Don't use it for anything else.
- */
-#ifdef CONFIG_ARM64_SVE
-void sve_flush_cpu_state(void)
-{
- struct fpsimd_last_state_struct const *last =
- this_cpu_ptr(&fpsimd_last_state);
-
- if (last->st && last->sve_in_use)
- fpsimd_flush_cpu_state();
-}
-#endif /* CONFIG_ARM64_SVE */
-
#ifdef CONFIG_KERNEL_MODE_NEON
DEFINE_PER_CPU(bool, kernel_neon_busy);
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index 379e8a9..9cef525 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -682,9 +682,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
*/
preempt_disable();
- /* Flush FP/SIMD state that can't survive guest entry/exit */
- kvm_fpsimd_flush_cpu_state();
-
kvm_pmu_flush_hwstate(vcpu);
local_irq_disable();
--
2.1.4
^ permalink raw reply related
* [PATCH v7 14/16] KVM: arm64: Remove redundant *exit_code changes in fpsimd_guest_exit()
From: Dave Martin @ 2018-05-09 16:13 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
In fixup_guest_exit(), there are a couple of cases where after
checking what the exit code was, we assign it explicitly with the
value it already had.
Assuming this is not indicative of a bug, these assignments are not
needed.
This patch removes the redundant assignments, and simplifies some
if-nesting that becomes trivial as a result.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/kvm/hyp/switch.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index a6a8c7d..18d0faa 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -403,12 +403,8 @@ static bool __hyp_text fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
if (valid) {
int ret = __vgic_v2_perform_cpuif_access(vcpu);
- if (ret == 1) {
- if (__skip_instr(vcpu))
- return true;
- else
- *exit_code = ARM_EXCEPTION_TRAP;
- }
+ if (ret == 1 && __skip_instr(vcpu))
+ return true;
if (ret == -1) {
/* Promote an illegal access to an
@@ -430,12 +426,8 @@ static bool __hyp_text fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_CP15_32)) {
int ret = __vgic_v3_perform_cpuif_access(vcpu);
- if (ret == 1) {
- if (__skip_instr(vcpu))
- return true;
- else
- *exit_code = ARM_EXCEPTION_TRAP;
- }
+ if (ret == 1 && __skip_instr(vcpu))
+ return true;
}
/* Return to the host kernel and handle the exit */
--
2.1.4
^ permalink raw reply related
* [PATCH v7 15/16] KVM: arm64: Fold redundant exit code checks out of fixup_guest_exit()
From: Dave Martin @ 2018-05-09 16:13 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
The entire tail of fixup_guest_exit() is contained in if statements
of the form if (x && *exit_code == ARM_EXCEPTION_TRAP). As a result,
we can check just once and bail out of the function early, allowing
the remaining if conditions to be simplified.
The only awkward case is where *exit_code is changed to
ARM_EXCEPTION_EL1_SERROR in the case of an illegal GICv2 CPU
interface access: in that case, the GICv3 trap handling code is
skipped using a goto. This avoids pointlessly evaluating the
static branch check for the GICv3 case, even though we can't have
vgic_v2_cpuif_trap and vgic_v3_cpuif_trap true simultaneously
unless we have a GICv3 and GICv2 on the host: that sounds stupid,
but I haven't satisfied myself that it can't happen.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/kvm/hyp/switch.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 18d0faa..4fbee95 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -387,11 +387,13 @@ static bool __hyp_text fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
* same PC once the SError has been injected, and replay the
* trapping instruction.
*/
- if (*exit_code == ARM_EXCEPTION_TRAP && !__populate_fault_info(vcpu))
+ if (*exit_code != ARM_EXCEPTION_TRAP)
+ goto exit;
+
+ if (!__populate_fault_info(vcpu))
return true;
- if (static_branch_unlikely(&vgic_v2_cpuif_trap) &&
- *exit_code == ARM_EXCEPTION_TRAP) {
+ if (static_branch_unlikely(&vgic_v2_cpuif_trap)) {
bool valid;
valid = kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_DABT_LOW &&
@@ -417,11 +419,12 @@ static bool __hyp_text fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
*vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS;
*exit_code = ARM_EXCEPTION_EL1_SERROR;
}
+
+ goto exit;
}
}
if (static_branch_unlikely(&vgic_v3_cpuif_trap) &&
- *exit_code == ARM_EXCEPTION_TRAP &&
(kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_SYS64 ||
kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_CP15_32)) {
int ret = __vgic_v3_perform_cpuif_access(vcpu);
@@ -430,6 +433,7 @@ static bool __hyp_text fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
return true;
}
+exit:
/* Return to the host kernel and handle the exit */
return false;
}
--
2.1.4
^ permalink raw reply related
* [PATCH v7 16/16] KVM: arm64: Invoke FPSIMD context switch trap from C
From: Dave Martin @ 2018-05-09 16:13 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-1-git-send-email-Dave.Martin@arm.com>
The conversion of the FPSIMD context switch trap code to C has added
some overhead to calling it, due to the need to save registers that
the procedure call standard defines as caller-saved.
So, perhaps it is no longer worth invoking this trap handler quite
so early.
Instead, we can invoke it from fixup_guest_exit(), with little
likelihood of increasing the overhead much further.
As a convenience, this patch gives __hyp_switch_fpsimd() the same
return semantics fixup_guest_exit(). For now there is no
possibility of a spurious FPSIMD trap, so the function always
returns true, but this allows it to be tail-called with a single
return statement.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/kvm/hyp/entry.S | 30 ------------------------------
arch/arm64/kvm/hyp/hyp-entry.S | 19 -------------------
arch/arm64/kvm/hyp/switch.c | 15 +++++++++++++--
3 files changed, 13 insertions(+), 51 deletions(-)
diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
index 40f349b..fad1e16 100644
--- a/arch/arm64/kvm/hyp/entry.S
+++ b/arch/arm64/kvm/hyp/entry.S
@@ -166,33 +166,3 @@ abort_guest_exit_end:
orr x0, x0, x5
1: ret
ENDPROC(__guest_exit)
-
-ENTRY(__fpsimd_guest_restore)
- // x0: esr
- // x1: vcpu
- // x2-x29,lr: vcpu regs
- // vcpu x0-x1 on the stack
- stp x2, x3, [sp, #-144]!
- stp x4, x5, [sp, #16]
- stp x6, x7, [sp, #32]
- stp x8, x9, [sp, #48]
- stp x10, x11, [sp, #64]
- stp x12, x13, [sp, #80]
- stp x14, x15, [sp, #96]
- stp x16, x17, [sp, #112]
- stp x18, lr, [sp, #128]
-
- bl __hyp_switch_fpsimd
-
- ldp x4, x5, [sp, #16]
- ldp x6, x7, [sp, #32]
- ldp x8, x9, [sp, #48]
- ldp x10, x11, [sp, #64]
- ldp x12, x13, [sp, #80]
- ldp x14, x15, [sp, #96]
- ldp x16, x17, [sp, #112]
- ldp x18, lr, [sp, #128]
- ldp x0, x1, [sp, #144]
- ldp x2, x3, [sp], #160
- eret
-ENDPROC(__fpsimd_guest_restore)
diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S
index bffece2..753b9d2 100644
--- a/arch/arm64/kvm/hyp/hyp-entry.S
+++ b/arch/arm64/kvm/hyp/hyp-entry.S
@@ -113,25 +113,6 @@ el1_hvc_guest:
el1_trap:
get_vcpu_ptr x1, x0
-
- mrs x0, esr_el2
- lsr x0, x0, #ESR_ELx_EC_SHIFT
- /*
- * x0: ESR_EC
- * x1: vcpu pointer
- */
-
- /*
- * We trap the first access to the FP/SIMD to save the host context
- * and restore the guest context lazily.
- * If FP/SIMD is not implemented, handle the trap and inject an
- * undefined instruction exception to the guest.
- */
-alternative_if_not ARM64_HAS_NO_FPSIMD
- cmp x0, #ESR_ELx_EC_FP_ASIMD
- b.eq __fpsimd_guest_restore
-alternative_else_nop_endif
-
mov x0, #ARM_EXCEPTION_TRAP
b __guest_exit
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 4fbee95..2d45bd7 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -328,8 +328,7 @@ static bool __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
}
}
-void __hyp_text __hyp_switch_fpsimd(u64 esr __always_unused,
- struct kvm_vcpu *vcpu)
+static bool __hyp_text __hyp_switch_fpsimd(struct kvm_vcpu *vcpu)
{
struct user_fpsimd_state *host_fpsimd = vcpu->arch.host_fpsimd_state;
@@ -369,6 +368,8 @@ void __hyp_text __hyp_switch_fpsimd(u64 esr __always_unused,
fpexc32_el2);
vcpu->arch.flags |= KVM_ARM64_FP_ENABLED;
+
+ return true;
}
/*
@@ -390,6 +391,16 @@ static bool __hyp_text fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
if (*exit_code != ARM_EXCEPTION_TRAP)
goto exit;
+ /*
+ * We trap the first access to the FP/SIMD to save the host context
+ * and restore the guest context lazily.
+ * If FP/SIMD is not implemented, handle the trap and inject an
+ * undefined instruction exception to the guest.
+ */
+ if (system_supports_fpsimd() &&
+ kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_FP_ASIMD)
+ return __hyp_switch_fpsimd(vcpu);
+
if (!__populate_fault_info(vcpu))
return true;
--
2.1.4
^ permalink raw reply related
* [PATCH v7 02/16] arm64: Use update{,_tsk}_thread_flag()
From: Will Deacon @ 2018-05-09 16:17 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1525882385-29181-3-git-send-email-Dave.Martin@arm.com>
Hi Dave,
On Wed, May 09, 2018 at 05:12:51PM +0100, Dave Martin wrote:
> This patch uses the new update_thread_flag() helpers to simplify a
> couple of if () set; else clear; constructs.
>
> No functional change.
>
> Signed-off-by: Dave Martin <Dave.Martin@arm.com>
> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> ---
> arch/arm64/kernel/fpsimd.c | 19 +++++++------------
> 1 file changed, 7 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
> index 87a3536..0c4e7e0 100644
> --- a/arch/arm64/kernel/fpsimd.c
> +++ b/arch/arm64/kernel/fpsimd.c
> @@ -618,10 +618,8 @@ int sve_set_vector_length(struct task_struct *task,
> task->thread.sve_vl = vl;
>
> out:
> - if (flags & PR_SVE_VL_INHERIT)
> - set_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
> - else
> - clear_tsk_thread_flag(task, TIF_SVE_VL_INHERIT);
> + update_tsk_thread_flag(task, TIF_SVE_VL_INHERIT,
> + flags & PR_SVE_VL_INHERIT);
>
> return 0;
> }
> @@ -902,7 +900,7 @@ void fpsimd_thread_switch(struct task_struct *next)
> if (current->mm)
> task_fpsimd_save();
>
> - if (next->mm) {
> + if (next->mm)
> /*
> * If we are switching to a task whose most recent userland
> * FPSIMD state is already in the registers of *this* cpu,
> @@ -910,13 +908,10 @@ void fpsimd_thread_switch(struct task_struct *next)
> * the TIF_FOREIGN_FPSTATE flag so the state will be loaded
> * upon the next return to userland.
> */
> - if (__this_cpu_read(fpsimd_last_state.st) ==
> - &next->thread.uw.fpsimd_state
> - && next->thread.fpsimd_cpu == smp_processor_id())
> - clear_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE);
> - else
> - set_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE);
> - }
> + update_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE,
> + __this_cpu_read(fpsimd_last_state.st) !=
> + &next->thread.uw.fpsimd_state ||
> + next->thread.fpsimd_cpu != smp_processor_id());
Given the multi-line comment and this multi-line call, I'd be inclined to
leave the curlies in place and then use a local bool for the complex
condition.
With that:
Acked-by: Will Deacon <will.deacon@arm.com>
Will
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox