* [PATCH] MAINTAINERS: Add entry for STM32 timer and lptimer drivers
From: Fabrice Gasnier @ 2018-05-15 15:33 UTC (permalink / raw)
To: linux-arm-kernel
Add an entry to make myself a maintainer of STM32 timer and lptimer
drivers.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
MAINTAINERS | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 4b65225..94d8e47 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13425,6 +13425,16 @@ T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/usb/stk1160/
+STM32 TIMER/LPTIMER DRIVERS
+M: Fabrice Gasnier <fabrice.gasnier@st.com>
+S: Maintained
+F: drivers/*/stm32-*timer*
+F: drivers/pwm/pwm-stm32*
+F: include/linux/*/stm32-*tim*
+F: Documentation/ABI/testing/*timer-stm32
+F: Documentation/devicetree/bindings/*/stm32-*timer
+F: Documentation/devicetree/bindings/pwm/pwm-stm32*
+
STMMAC ETHERNET DRIVER
M: Giuseppe Cavallaro <peppe.cavallaro@st.com>
M: Alexandre Torgue <alexandre.torgue@st.com>
--
1.9.1
^ permalink raw reply related
* [PATCH v4 6/8] PCI: Rework of_pci_get_host_bridge_resources() to devm_of_pci_get_host_bridge_resources()
From: Jingoo Han @ 2018-05-15 15:31 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <3aeb2ed038cbce8fe744b614dc19d414555a7e8f.1526375226.git.jan.kiszka@siemens.com>
On Tuesday, May 15, 2018 5:07 AM, Jan Kiszka wrote:
>
> From: Jan Kiszka <jan.kiszka@siemens.com>
>
> of_pci_get_host_bridge_resources() allocates the resource structures it
> fills dynamically, but none of its callers care to release them so far.
> Rather than requiring everyone to do this explicitly, convert the
> existing function to a managed version.
>
> CC: Jingoo Han <jingoohan1@gmail.com>
> CC: Joao Pinto <Joao.Pinto@synopsys.com>
> CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Best regards,
Jingoo Han
> ---
> drivers/pci/dwc/pcie-designware-host.c | 2 +-
> drivers/pci/host/pci-aardvark.c | 2 +-
> drivers/pci/host/pci-ftpci100.c | 2 +-
> drivers/pci/host/pci-v3-semi.c | 2 +-
> drivers/pci/host/pci-versatile.c | 2 +-
> drivers/pci/host/pci-xgene.c | 2 +-
> drivers/pci/host/pcie-altera.c | 2 +-
> drivers/pci/host/pcie-iproc-platform.c | 2 +-
> drivers/pci/host/pcie-rcar.c | 2 +-
> drivers/pci/host/pcie-rockchip.c | 2 +-
> drivers/pci/host/pcie-xilinx-nwl.c | 2 +-
> drivers/pci/host/pcie-xilinx.c | 2 +-
> drivers/pci/of.c | 30
++++++++++++------------------
> include/linux/of_pci.h | 4 ++--
> 14 files changed, 26 insertions(+), 32 deletions(-)
>
^ permalink raw reply
* [PATCH] iio: adc: stm32-dfsdm: Add support for stm32mp1
From: Fabrice Gasnier @ 2018-05-15 15:23 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180512103324.5068c893@archlinux>
On 05/12/2018 11:33 AM, Jonathan Cameron wrote:
> On Mon, 7 May 2018 15:51:51 -0500
> Rob Herring <robh@kernel.org> wrote:
>
>> On Wed, May 02, 2018 at 03:05:23PM +0200, Fabrice Gasnier wrote:
>>> Add support for DFSDM (Digital Filter For Sigma Delta Modulators)
>>> to STM32MP1. This variant is close to STM32H7 DFSDM, it implements
>>> 6 filter instances. Registers map is also increased.
>>>
>>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
>>> ---
>>> .../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 7 +++++--
>>> drivers/iio/adc/stm32-dfsdm-core.c | 21 +++++++++++++++++++++
>>> 2 files changed, 26 insertions(+), 2 deletions(-)
>>
>> Reviewed-by: Rob Herring <robh@kernel.org>
> Applied. Whilst doing this I note that I'm getting a few sparse
> warnings for this driver that would be nice to clean up...
>
> CHECK drivers/iio/adc/stm32-dfsdm-adc.c
> drivers/iio/adc/stm32-dfsdm-adc.c:503:21: warning: expression using sizeof(void)
> drivers/iio/adc/stm32-dfsdm-adc.c:503:21: warning: expression using sizeof(void)
>
> Which is mystifying at first glance... Something deep and dirty in the min macro
> but I can't see what..
Hi Jonathan,
I just sent a patch to clean bellow warning. But this is more obscure
regarding min macro...
Many thanks,
Fabrice
>
> drivers/iio/adc/stm32-dfsdm-adc.c:680:5: warning: symbol 'stm32_dfsdm_get_buff_cb' was not declared. Should it be static?
> drivers/iio/adc/stm32-dfsdm-adc.c:703:5: warning: symbol 'stm32_dfsdm_release_buff_cb' was not declared. Should it be static?
>
> Are rather more obvious
>
^ permalink raw reply
* [PATCH] iio: adc: stm32-dfsdm: include stm32-dfsdm-adc.h
From: Fabrice Gasnier @ 2018-05-15 15:19 UTC (permalink / raw)
To: linux-arm-kernel
Fix the following sparse warnings:
CHECK drivers/iio/adc/stm32-dfsdm-adc.c
symbol 'stm32_dfsdm_get_buff_cb' was not declared. Should it be static?
symbol 'stm32_dfsdm_release_buff_cb' was not declared. Should it be static?
BTW, move interrupt.h to sort headers alphabetically.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
drivers/iio/adc/stm32-dfsdm-adc.c | 4 ++--
include/linux/iio/adc/stm32-dfsdm-adc.h | 2 ++
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index 1b78bec..31462ae 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -8,11 +8,11 @@
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
+#include <linux/iio/adc/stm32-dfsdm-adc.h>
#include <linux/iio/buffer.h>
#include <linux/iio/hw-consumer.h>
-#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
+#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
diff --git a/include/linux/iio/adc/stm32-dfsdm-adc.h b/include/linux/iio/adc/stm32-dfsdm-adc.h
index e7dc7a5..0da298b 100644
--- a/include/linux/iio/adc/stm32-dfsdm-adc.h
+++ b/include/linux/iio/adc/stm32-dfsdm-adc.h
@@ -9,6 +9,8 @@
#ifndef STM32_DFSDM_ADC_H
#define STM32_DFSDM_ADC_H
+#include <linux/iio/iio.h>
+
int stm32_dfsdm_get_buff_cb(struct iio_dev *iio_dev,
int (*cb)(const void *data, size_t size,
void *private),
--
1.9.1
^ permalink raw reply related
* [PATCHv2] arm64: dts: stratix10: Add QSPI support for Stratix10
From: Dinh Nguyen @ 2018-05-15 15:11 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526055052-11371-1-git-send-email-thor.thayer@linux.intel.com>
On 05/11/2018 11:10 AM, thor.thayer at linux.intel.com wrote:
> From: Thor Thayer <thor.thayer@linux.intel.com>
>
> Add qspi_clock
> The qspi_clk frequency is updated by U-Boot before starting Linux.
> Add QSPI interface node.
> Add QSPI flash memory child node.
> Setup the QSPI memory in 2 partitions.
>
> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
> ---
> v2 s/_/-/ in qspi-clk
> rename flash node.
> use partition child node notation
> ---
> arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 22 ++++++++++++++
> .../boot/dts/altera/socfpga_stratix10_socdk.dts | 35 ++++++++++++++++++++++
> 2 files changed, 57 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
> index e6b059378dc0..bac01b0b7907 100644
> --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
> +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
> @@ -119,6 +119,12 @@
> #clock-cells = <0>;
> compatible = "fixed-clock";
> };
> +
> + qspi_clk: qspi-clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <200000000>;
> + };
> };
>
> gmac0: ethernet at ff800000 {
> @@ -466,5 +472,21 @@
> interrupts = <16 4>, <48 4>;
> };
> };
> +
> + qspi: spi at ff8d2000 {
> + compatible = "cdns,qspi-nor";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0xff8d2000 0x100>,
> + <0xff900000 0x100000>;
> + interrupts = <0 3 4>;
> + cdns,fifo-depth = <128>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x00000000>;
> + clocks = <&qspi_clk>;
> + bus-num = <1>;
I don't you need "bus-num" anymore right? I don't see it getting used
anywhere in the driver.
Dinh
^ permalink raw reply
* [PATCH 1/4] amba: Export amba_bustype
From: Mathieu Poirier @ 2018-05-15 15:07 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180515093718.19ca71295fc36fe65c5df021@arm.com>
On 15 May 2018 at 08:37, Kim Phillips <kim.phillips@arm.com> wrote:
> On Tue, 15 May 2018 14:48:31 +0100
> Russell King - ARM Linux <linux@armlinux.org.uk> wrote:
>
>> On Tue, May 15, 2018 at 08:15:19AM -0500, Kim Phillips wrote:
>> > On Tue, 15 May 2018 08:59:02 +0200
>> > Ulf Hansson <ulf.hansson@linaro.org> wrote:
>> >
>> > > On 8 May 2018 at 21:06, Kim Phillips <kim.phillips@arm.com> wrote:
>> > > > This patch is provided in the context of allowing the Coresight driver
>> > > > subsystem to be loaded as modules. Coresight uses amba_bus in its call
>> > > > to bus_find_device() in of_coresight_get_endpoint_device() when
>> > > > searching for a configurable endpoint device. This patch allows
>> > > > Coresight to reference amba_bustype when built as a module.
>> > >
>> > > Sounds like you are fixing a bug, don't your want this to go for
>> > > stable and then also add a fixes tag?
>> >
>> > How do you consider this a bug fix? What commit would the fixes tag
>> > reference? The introduction of the amba bus? Not only aren't busses
>> > required to export their bus_type, but that commit predates git.
>>
>> I do not consider it a bug fix (see my reply to Ulf) and I certainly
>
> I agree this isn't a bug fix.
>
>> The only problem which we're aware of is with Coresight, and only then
>> when your patches to allow Coresight to be modular are merged. That's
>
> Just to clarify: the Coresight modularization patch depends on this
> patch, so this patch is to be merged first.
I think the whole feature should be merge at the same time and (with
Russell's ACK) probably easier through my tree.
>
> Cheers,
>
> Kim
^ permalink raw reply
* [PATCH v2 2/4] arm64: dts: rockchip: add rk3328 display nodes
From: Robin Murphy @ 2018-05-15 15:03 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180515135457.6252-3-heiko@sntech.de>
Hi Heiko,
Just a trivial nit I failed to consider last time...
On 15/05/18 14:54, Heiko Stuebner wrote:
> Add the chain of display nodes from the core display-subsystem
> through the one vop to the dw-hdmi output.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> Tested-by: Robin Murphy <robin.murphy@arm.com>
> ---
> changes in v2:
> - remove trailing 0 from vop irq
>
> arch/arm64/boot/dts/rockchip/rk3328.dtsi | 56 ++++++++++++++++++++++++
> 1 file changed, 56 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> index 04d81ea0924e..16e7cf210875 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> @@ -185,6 +185,11 @@
> interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> };
>
> + display_subsystem: display-subsystem {
> + compatible = "rockchip,display-subsystem";
> + ports = <&vop_out>;
> + };
> +
> psci {
> compatible = "arm,psci-1.0", "arm,psci-0.2";
> method = "smc";
> @@ -634,6 +639,28 @@
> status = "disabled";
> };
>
> + vop: vop at ff370000 {
> + compatible = "rockchip,rk3328-vop";
> + reg = <0x0 0xff370000 0x0 0x3efc>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_VOP>, <&cru DCLK_LCDC>, <&cru HCLK_VOP>;
> + clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
> + resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
> + reset-names = "axi", "ahb", "dclk";
> + iommus = <&vop_mmu>;
> + status = "disabled";
> +
> + vop_out: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + vop_out_hdmi: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&hdmi_in_vop>;
> + };
> + };
> + };
> +
> vop_mmu: iommu at ff373f00 {
> compatible = "rockchip,iommu";
> reg = <0x0 0xff373f00 0x0 0x100>;
> @@ -645,6 +672,35 @@
> status = "disabled";
> };
>
> + hdmi: hdmi at ff3c0000 {
> + compatible = "rockchip,rk3328-dw-hdmi";
> + reg = <0x0 0xff3c0000 0x0 0x20000>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru PCLK_HDMI>,
> + <&cru SCLK_HDMI_SFC>;
> + clock-names = "iahb",
> + "isfr";
> + phys = <&hdmiphy>;
> + phy-names = "hdmi";
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
> + rockchip,grf = <&grf>;
> + status = "disabled";
> +
> + ports {
> + hdmi_in: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
FWIW I think we could just drop these (along with the reg and unit
address below), since with a single VOP instance I guess there can only
ever be one remote endpoint here.
(I assume the VOP itself has a potential second endpoint at the video
DAC, so there's some argument for explicit numbering there)
Robin.
> + hdmi_in_vop: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&vop_out_hdmi>;
> + };
> + };
> + };
> + };
> +
> hdmiphy: phy at ff430000 {
> compatible = "rockchip,rk3328-hdmi-phy";
> reg = <0x0 0xff430000 0x0 0x10000>;
>
^ permalink raw reply
* [PATCH v2 0/5] Hi3660: enable power management features
From: Leo Yan @ 2018-05-15 14:54 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <5AFAF3CE.70601@hisilicon.com>
On Tue, May 15, 2018 at 03:50:54PM +0100, Wei Xu wrote:
> Hi Leo,
>
> On 2018/5/15 3:53, Leo Yan wrote:
> > Since hi3660 drivers have been merged into Linux kernel (mailbox driver is in
> > Linux-next branch and other drivers are existed in Linux mainline kernel), so
> > this patch series is to enable power management features on hi3660.
> >
> > This patch series includes device tree binding for mailbox, stub clock and CPU
> > OPPs, and has one patch to consolidate the Kconfigs for driver modules.
> >
> > This patch set have been tested on Hikey960 and also verified the patch 'hisi:
> > Consolidate the Kconfigs for the CLOCK_STUB and the MAILBOX' for Hikey620.
> >
> > Changes from v1:
> > * Changed patch subject from "dts: arm64: hi3660" to "arm64: dts: hi3660".
> >
> >
> > Daniel Lezcano (1):
> > hisi: Consolidate the Kconfigs for the CLOCK_STUB and the MAILBOX
> >
> > Kaihua Zhong (2):
> > arm64: dts: hi3660: Add mailbox node
> > arm64: dts: hi3660: Add stub clock node
> >
> > Leo Yan (1):
> > arm64: dts: hi3660: Add CPU frequency scaling support
> >
> > Tao Wang (1):
> > arm64: dts: hi3660: Add thermal cooling management
> >
> > arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 145 ++++++++++++++++++++++++++++++
> > arch/arm64/configs/defconfig | 1 -
> > drivers/clk/hisilicon/Kconfig | 13 +--
> > drivers/mailbox/Kconfig | 12 ++-
> > 4 files changed, 161 insertions(+), 10 deletions(-)
> >
>
> Applied patch 1 to 4.
> Thanks!
Thanks a lot, Wei.
> Best Regards,
> Wei
>
^ permalink raw reply
* [PATCH v2 0/5] Hi3660: enable power management features
From: Wei Xu @ 2018-05-15 14:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526352795-6991-1-git-send-email-leo.yan@linaro.org>
Hi Leo,
On 2018/5/15 3:53, Leo Yan wrote:
> Since hi3660 drivers have been merged into Linux kernel (mailbox driver is in
> Linux-next branch and other drivers are existed in Linux mainline kernel), so
> this patch series is to enable power management features on hi3660.
>
> This patch series includes device tree binding for mailbox, stub clock and CPU
> OPPs, and has one patch to consolidate the Kconfigs for driver modules.
>
> This patch set have been tested on Hikey960 and also verified the patch 'hisi:
> Consolidate the Kconfigs for the CLOCK_STUB and the MAILBOX' for Hikey620.
>
> Changes from v1:
> * Changed patch subject from "dts: arm64: hi3660" to "arm64: dts: hi3660".
>
>
> Daniel Lezcano (1):
> hisi: Consolidate the Kconfigs for the CLOCK_STUB and the MAILBOX
>
> Kaihua Zhong (2):
> arm64: dts: hi3660: Add mailbox node
> arm64: dts: hi3660: Add stub clock node
>
> Leo Yan (1):
> arm64: dts: hi3660: Add CPU frequency scaling support
>
> Tao Wang (1):
> arm64: dts: hi3660: Add thermal cooling management
>
> arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 145 ++++++++++++++++++++++++++++++
> arch/arm64/configs/defconfig | 1 -
> drivers/clk/hisilicon/Kconfig | 13 +--
> drivers/mailbox/Kconfig | 12 ++-
> 4 files changed, 161 insertions(+), 10 deletions(-)
>
Applied patch 1 to 4.
Thanks!
Best Regards,
Wei
^ permalink raw reply
* [PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding
From: Geert Uytterhoeven @ 2018-05-15 14:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526387370-17142-4-git-send-email-gilad@benyossef.com>
Hi Gilad,
On Tue, May 15, 2018 at 2:29 PM, Gilad Ben-Yossef <gilad@benyossef.com> wrote:
> Add bindings for CryptoCell instance in the SoC.
>
> Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Thanks for your patch!
> --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> @@ -528,6 +528,14 @@
> status = "disabled";
> };
>
> + arm_cc630p: crypto at e6601000 {
> + compatible = "arm,cryptocell-630p-ree";
> + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> + #interrupt-cells = <2>;
I believe the #interrupt-cells property is not needed.
> + reg = <0x0 0xe6601000 0 0x1000>;
> + clocks = <&cpg CPG_MOD 229>;
> + };
The rest looks good, but I cannot verify the register block.
> +
> i2c3: i2c at e66d0000 {
> #address-cells = <1>;
> #size-cells = <0>;
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* [PATCH 2/3] clk: renesas: r8a7795: Add ccree clock
From: Geert Uytterhoeven @ 2018-05-15 14:47 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526387370-17142-3-git-send-email-gilad@benyossef.com>
Hi Gilad,
On Tue, May 15, 2018 at 2:29 PM, Gilad Ben-Yossef <gilad@benyossef.com> wrote:
> This patch adds the clock used by the CryptoCell 630p instance in the SoC.
>
> Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Thanks for your patch!
> --- a/drivers/clk/renesas/r8a7795-cpg-mssr.c
> +++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c
> @@ -132,6 +132,7 @@ static struct mssr_mod_clk r8a7795_mod_clks[] __initdata = {
> DEF_MOD("sys-dmac2", 217, R8A7795_CLK_S0D3),
> DEF_MOD("sys-dmac1", 218, R8A7795_CLK_S0D3),
> DEF_MOD("sys-dmac0", 219, R8A7795_CLK_S0D3),
> + DEF_MOD("ccree", 229, R8A7795_CLK_S3D2),
I don't know if "ccree" is the proper name for this clock, as there
may be multiple
instances.
I also can't verify the parent clock.
> DEF_MOD("cmt3", 300, R8A7795_CLK_R),
> DEF_MOD("cmt2", 301, R8A7795_CLK_R),
> DEF_MOD("cmt1", 302, R8A7795_CLK_R),
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* [PATCH v8 0/5] clk: meson-axg: Add AO Cloclk and Reset driver
From: Jerome Brunet @ 2018-05-15 14:40 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180503132624.78453-1-yixun.lan@amlogic.com>
On Thu, 2018-05-03 at 21:26 +0800, Yixun Lan wrote:
> This patch try to add AO clock and Reset driver for Amlogic's
> Meson-AXG SoC.
>
> patch 1: factor the common code into a dedicated file
> patch 2-4: add the aoclk driver for AXG SoC
> patch 5: drop unnecessary clock flags
>
> changes since v7 at [8]:
> - drop the 'drop CLK_IGNORE_UNUSED flag' patch
> to avoid circle dependencies
> - fix Philip's Ack on patch 3
>
> changes since v6 at [7]:
> - fix over 80 chars chechpatch error
> - add Philip's Ack on patch 5
> - drop extra end of newline
>
> changes since v5 at [6]:
> - drop unnecessary header files
> - add 'axg_aoclk' prefix to clk driver, make them more consistent
> - add missing end new line..
>
> changes since v4 at [5]:
> - fix return err
> - introduce CONFIG_COMMON_CLK_MESON_AO
> - format/style minor fix
>
> changes since v3 at [4]:
> - add 'const' contraint to the read-only data
> - switch to devm_of_clk_add_hw_provider API
> - check return value of devm_reset_controller_register
>
> changes since v2 at [2]:
> - rework meson_aoclkc_probe() which leverage the of_match_data
> - merge patch 5-6 into this series
> - seperate DTS patch, will send to Kevin Hilman independently
>
> changes since v1 at [0]:
> - rebase to clk-meson's branch 'next/drivers' [1]
> - fix license, update to BSD-3-Clause
> - drop un-used include header file
>
> [0] https://lkml.kernel.org/r/20180209070026.193879-1-yixun.lan at amlogic.com
> [1] git://github.com/BayLibre/clk-meson.git branch: next-drivers
> [2] https://lkml.kernel.org/r/20180323143816.200573-1-yixun.lan at amlogic.com
> [3] https://lkml.kernel.org/r/20180326081809.49493-4-yixun.lan at amlogic.com
> [4] https://lkml.kernel.org/r/20180328025050.221585-1-yixun.lan at amlogic.com
> [5] https://lkml.kernel.org/r/20180408031938.153474-1-yixun.lan at amlogic.com
> [6] https://lkml.kernel.org/r/20180409143749.71197-1-yixun.lan at amlogic.com
> [7] https://lkml.kernel.org/r/20180419135426.155794-1-yixun.lan at amlogic.com
> [8] https://lkml.kernel.org/r/20180426084437.192394-1-yixun.lan at amlogic.com
>
>
> Qiufang Dai (1):
> clk: meson-axg: Add AO Clock and Reset controller driver
>
> Yixun Lan (4):
> clk: meson: aoclk: refactor common code into dedicated file
> dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC
> dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings
> clk: meson: drop CLK_SET_RATE_PARENT flag
Applied
>
> .../bindings/clock/amlogic,gxbb-aoclkc.txt | 1 +
> drivers/clk/meson/Kconfig | 8 +
> drivers/clk/meson/Makefile | 3 +-
> drivers/clk/meson/axg-aoclk.c | 164 ++++++++++++++++++
> drivers/clk/meson/axg-aoclk.h | 29 ++++
> drivers/clk/meson/gxbb-aoclk.c | 96 ++++------
> drivers/clk/meson/gxbb-aoclk.h | 5 +
> drivers/clk/meson/meson-aoclk.c | 81 +++++++++
> drivers/clk/meson/meson-aoclk.h | 34 ++++
> include/dt-bindings/clock/axg-aoclkc.h | 26 +++
> include/dt-bindings/reset/axg-aoclkc.h | 20 +++
> 11 files changed, 403 insertions(+), 64 deletions(-)
> create mode 100644 drivers/clk/meson/axg-aoclk.c
> create mode 100644 drivers/clk/meson/axg-aoclk.h
> create mode 100644 drivers/clk/meson/meson-aoclk.c
> create mode 100644 drivers/clk/meson/meson-aoclk.h
> create mode 100644 include/dt-bindings/clock/axg-aoclkc.h
> create mode 100644 include/dt-bindings/reset/axg-aoclkc.h
>
^ permalink raw reply
* [GIT PULL v2] arm64: dts: hisilicon dts updates for v4.18
From: Wei Xu @ 2018-05-15 14:40 UTC (permalink / raw)
To: linux-arm-kernel
Hi Olof, Hi Arnd,
Please help to pull the following changes.
Thanks!
Best Regards,
Wei
---
The following changes since commit 60cc43fc888428bb2f18f08997432d426a243338:
Linux 4.17-rc1 (2018-04-15 18:24:20 -0700)
are available in the Git repository at:
git://github.com/hisilicon/linux-hisi.git tags/hisi-arm64-dt-for-4.18v2
for you to fetch changes up to bb61c53601b4af0f33f99ec0a8c9315246a0b6d4:
arm64: dts: hi3798cv200: enable emmc support for poplar board (2018-05-15 14:54:03 +0100)
----------------------------------------------------------------
ARM64: DT: Hisilicon SoC DT updates for 4.18v2
- Add mailbox, stub clock, CPU frequency scaling, thermal cooling
management and pcie msi interruption support for hi3660
- Add LPC support for hip06 and hip07
- Add PCIe, usb and emmc support for hi3798cv200
----------------------------------------------------------------
John Garry (2):
arm64: dts: hisi: Enable Hisi LPC node for hip06
arm64: dts: hisi: Enable Hisi LPC node for hip07
Kaihua Zhong (2):
arm64: dts: hi3660: Add mailbox node
arm64: dts: hi3660: Add stub clock node
Leo Yan (1):
arm64: dts: hi3660: Add CPU frequency scaling support
Shawn Guo (3):
arm64: dts: hi3798cv200: enable PCIe support for poplar board
arm64: dts: hi3798cv200: enable usb2 support for poplar board
arm64: dts: hi3798cv200: enable emmc support for poplar board
Tao Wang (1):
arm64: dts: hi3660: Add thermal cooling management
Yao Chen (1):
arm64: dts: hi3660: Add pcie msi interrupt attribute
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 147 +++++++++++++++
.../boot/dts/hisilicon/hi3798cv200-poplar.dts | 38 ++++
arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 205 ++++++++++++++++++++-
arch/arm64/boot/dts/hisilicon/hip06-d03.dts | 8 +
arch/arm64/boot/dts/hisilicon/hip06.dtsi | 21 +++
arch/arm64/boot/dts/hisilicon/hip07-d05.dts | 4 +
arch/arm64/boot/dts/hisilicon/hip07.dtsi | 14 ++
arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi | 98 ++++++++++
8 files changed, 532 insertions(+), 3 deletions(-)
create mode 100644 arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi
^ permalink raw reply
* [PATCH 1/4] amba: Export amba_bustype
From: Kim Phillips @ 2018-05-15 14:37 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180515134831.GG16141@n2100.armlinux.org.uk>
On Tue, 15 May 2018 14:48:31 +0100
Russell King - ARM Linux <linux@armlinux.org.uk> wrote:
> On Tue, May 15, 2018 at 08:15:19AM -0500, Kim Phillips wrote:
> > On Tue, 15 May 2018 08:59:02 +0200
> > Ulf Hansson <ulf.hansson@linaro.org> wrote:
> >
> > > On 8 May 2018 at 21:06, Kim Phillips <kim.phillips@arm.com> wrote:
> > > > This patch is provided in the context of allowing the Coresight driver
> > > > subsystem to be loaded as modules. Coresight uses amba_bus in its call
> > > > to bus_find_device() in of_coresight_get_endpoint_device() when
> > > > searching for a configurable endpoint device. This patch allows
> > > > Coresight to reference amba_bustype when built as a module.
> > >
> > > Sounds like you are fixing a bug, don't your want this to go for
> > > stable and then also add a fixes tag?
> >
> > How do you consider this a bug fix? What commit would the fixes tag
> > reference? The introduction of the amba bus? Not only aren't busses
> > required to export their bus_type, but that commit predates git.
>
> I do not consider it a bug fix (see my reply to Ulf) and I certainly
I agree this isn't a bug fix.
> The only problem which we're aware of is with Coresight, and only then
> when your patches to allow Coresight to be modular are merged. That's
Just to clarify: the Coresight modularization patch depends on this
patch, so this patch is to be merged first.
Cheers,
Kim
^ permalink raw reply
* [PATCH v4 6/8] PCI: Rework of_pci_get_host_bridge_resources() to devm_of_pci_get_host_bridge_resources()
From: Joao Pinto @ 2018-05-15 14:28 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <3aeb2ed038cbce8fe744b614dc19d414555a7e8f.1526375226.git.jan.kiszka@siemens.com>
Hi Jan,
?s 10:07 AM de 5/15/2018, Jan Kiszka escreveu:
> From: Jan Kiszka <jan.kiszka@siemens.com>
>
> of_pci_get_host_bridge_resources() allocates the resource structures it
> fills dynamically, but none of its callers care to release them so far.
> Rather than requiring everyone to do this explicitly, convert the
> existing function to a managed version.
>
> CC: Jingoo Han <jingoohan1@gmail.com>
> CC: Joao Pinto <Joao.Pinto@synopsys.com>
> CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
> drivers/pci/dwc/pcie-designware-host.c | 2 +-
> drivers/pci/host/pci-aardvark.c | 2 +-
> drivers/pci/host/pci-ftpci100.c | 2 +-
> drivers/pci/host/pci-v3-semi.c | 2 +-
> drivers/pci/host/pci-versatile.c | 2 +-
> drivers/pci/host/pci-xgene.c | 2 +-
> drivers/pci/host/pcie-altera.c | 2 +-
> drivers/pci/host/pcie-iproc-platform.c | 2 +-
> drivers/pci/host/pcie-rcar.c | 2 +-
> drivers/pci/host/pcie-rockchip.c | 2 +-
> drivers/pci/host/pcie-xilinx-nwl.c | 2 +-
> drivers/pci/host/pcie-xilinx.c | 2 +-
> drivers/pci/of.c | 30 ++++++++++++------------------
> include/linux/of_pci.h | 4 ++--
> 14 files changed, 26 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/pci/dwc/pcie-designware-host.c b/drivers/pci/dwc/pcie-designware-host.c
> index 5a535690b7b5..a8f6ab54b4c0 100644
> --- a/drivers/pci/dwc/pcie-designware-host.c
> +++ b/drivers/pci/dwc/pcie-designware-host.c
> @@ -342,7 +342,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
> if (!bridge)
> return -ENOMEM;
>
> - ret = of_pci_get_host_bridge_resources(dev, 0, 0xff,
> + ret = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff,
> &bridge->windows, &pp->io_base);
> if (ret)
> return ret;
(snip...)
Thanks for this patch!
Acked-by: Joao Pinto <jpinto@synopsys.com>
^ permalink raw reply
* [patch v21 4/4] Documentation: jtag: Add ABI documentation
From: Oleksandr Shamray @ 2018-05-15 14:21 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526394095-5069-1-git-send-email-oleksandrs@mellanox.com>
Added document that describe the ABI for JTAG class drivrer
Signed-off-by: Oleksandr Shamray <oleksandrs@mellanox.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
v19->v20
Comments pointed by Randy Dunlap <rdunlap@infradead.org>
- Fix JTAG doccumentation
v18->v19
Pavel Machek <pavel@ucw.cz>
- Added JTAG doccumentation to Documentation/jtag
v17->v18
v16->v17
v15->v16
v14->v15
v13->v14
v12->v13
v11->v12
Tobias Klauser <tklauser@distanz.ch>
- rename /Documentation/ABI/testing/jatg-dev -> jtag-dev
- Typo: s/interfase/interface
v10->v11
v9->v10
Fixes added by Oleksandr:
- change jtag-cdev to jtag-dev in documentation
- update Kernel Version and Date in jtag-dev documentation;
v8->v9
v7->v8
v6->v7
Comments pointed by Pavel Machek <pavel@ucw.cz>
- Added jtag-cdev documentation to Documentation/ABI/testing folder
---
Documentation/ABI/testing/jtag-dev | 27 +++++++++
Documentation/jtag/overview | 28 +++++++++
Documentation/jtag/transactions | 109 ++++++++++++++++++++++++++++++++++++
3 files changed, 164 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/testing/jtag-dev
create mode 100644 Documentation/jtag/overview
create mode 100644 Documentation/jtag/transactions
diff --git a/Documentation/ABI/testing/jtag-dev b/Documentation/ABI/testing/jtag-dev
new file mode 100644
index 0000000..4325316
--- /dev/null
+++ b/Documentation/ABI/testing/jtag-dev
@@ -0,0 +1,27 @@
+What: /dev/jtag[0-9]+
+Date: May 2018
+KernelVersion: 4.18
+Contact: oleksandrs at mellanox.com
+Description:
+ The misc device files /dev/jtag* are the interface
+ between JTAG master interface and userspace.
+
+ The ioctl(2)-based ABI is defined and documented in
+ [include/uapi]<linux/jtag.h>.
+
+ The following file operations are supported:
+
+ open(2)
+ The argument flag currently support only one access
+ mode O_RDWR.
+
+ ioctl(2)
+ Initiate various actions.
+ See the inline documentation in [include/uapi]<linux/jtag.h>
+ for descriptions of all ioctls.
+
+ close(2)
+ Stops and free up the I/O contexts that was associated
+ with the file descriptor.
+
+Users: TBD
diff --git a/Documentation/jtag/overview b/Documentation/jtag/overview
new file mode 100644
index 0000000..a86f188
--- /dev/null
+++ b/Documentation/jtag/overview
@@ -0,0 +1,28 @@
+Linux kernel JTAG support
+=========================
+
+The JTAG is an industry standard for verifying hardware
+JTAG provides access to many logic signals of a complex integrated circuit,
+including the device pins.
+
+A JTAG interface is a special interface added to a chip.
+Depending on the version of JTAG, two, four, or five pins are added.
+
+The connector pins are:
+ TDI (Test Data In)
+ TDO (Test Data Out)
+ TCK (Test Clock)
+ TMS (Test Mode Select)
+ TRST (Test Reset) optional.
+
+JTAG interface is designed to have two parts - basic core driver and
+hardware specific driver. The basic driver introduces a general interface
+which is not dependent of specific hardware. It provides communication
+between user space and hardware specific driver.
+Each JTAG device is represented as a char device from (jtag0, jtag1, ...).
+Access to a JTAG device is performed through IOCTL calls.
+
+Call flow example:
+User: open -> /dev/jatgX
+User: ioctl -> /dev/jtagX -> JTAG core driver -> JTAG hw specific driver
+User: close -> /dev/jatgX
diff --git a/Documentation/jtag/transactions b/Documentation/jtag/transactions
new file mode 100644
index 0000000..6a857c8
--- /dev/null
+++ b/Documentation/jtag/transactions
@@ -0,0 +1,109 @@
+The JTAG API
+=============
+
+JTAG master devices can be accessed through a character misc-device.
+Each JTAG master interface can be accessed by using /dev/jtagN
+
+JTAG system calls set:
+- SIR (Scan Instruction Register, IEEE 1149.1 Instruction Register scan);
+- SDR (Scan Data Register, IEEE 1149.1 Data Register scan);
+- RUNTEST (Forces the IEEE 1149.1 bus to a run state for a specified
+number of clocks.
+
+open(), close()
+-------
+open() opens JTAG device. Only one open operation per JTAG device
+can be performed. Two or more open for one device will return error
+
+Open/Close device:
+- open("/dev/jtag0", O_RDWR);
+- close(jtag_fd');
+
+ioctl()
+-------
+All access operations to JTAG devices performed through ioctl interface.
+The IOCTL interface supports this requests:
+ JTAG_IOCRUNTEST - Force JTAG state machine to RUN_TEST/IDLE state
+ JTAG_SIOCFREQ - Set JTAG TCK frequency
+ JTAG_GIOCFREQ - Get JTAG TCK frequency
+ JTAG_IOCXFER - send JTAG data Xfer
+ JTAG_GIOCSTATUS - get current JTAG TAP status
+ JTAG_SIOCMODE - set JTAG mode flags.
+
+JTAG_SIOCFREQ, JTAG_GIOCFREQ
+------
+Set/Get JTAG clock speed:
+
+ unsigned int jtag_fd;
+ ioctl(jtag_fd, JTAG_SIOCFREQ, &frq);
+ ioctl(jtag_fd, JTAG_GIOCFREQ, &frq);
+
+JTAG_IOCRUNTEST
+------
+Force JTAG state machine to RUN_TEST/IDLE state
+
+struct jtag_run_test_idle {
+ __u8 reset;
+ __u8 endstate;
+ __u8 tck;
+};
+
+reset: 0 - run IDLE/PAUSE from current state
+ 1 - go through TEST_LOGIC/RESET state before IDLE/PAUSE
+endstate: completion flag
+tck: clock counter
+
+Example:
+ struct jtag_run_test_idle runtest;
+
+ runtest.endstate = JTAG_STATE_IDLE;
+ runtest.reset = 0;
+ runtest.tck = data_p->tck;
+ usleep(25 * 1000);
+ ioctl(jtag_fd, JTAG_IOCRUNTEST, &runtest);
+
+JTAG_IOCXFER
+------
+Send SDR/SIR transaction
+
+struct jtag_xfer {
+ __u8 type;
+ __u8 direction;
+ __u8 endstate;
+ __u8 padding;
+ __u32 length;
+ __u64 tdio;
+};
+
+type: transfer type - JTAG_SIR_XFER/JTAG_SDR_XFER
+direction: xfer direction - JTAG_SIR_XFER/JTAG_SDR_XFER,
+length: xfer data len in bits
+tdio : xfer data array
+endstate: xfer end state after transaction finish
+ can be: JTAG_STATE_IDLE/JTAG_STATE_PAUSEIR/JTAG_STATE_PAUSEDR
+
+Example:
+ struct jtag_xfer xfer;
+ static char buf[64];
+ static unsigned int buf_len = 0;
+ [...]
+ xfer.type = JTAG_SDR_XFER;
+ xfer.tdio = (__u64)buf;
+ xfer.length = buf_len;
+ xfer.endstate = JTAG_STATE_IDLE;
+
+ if (is_read)
+ xfer.direction = JTAG_READ_XFER;
+ else
+ xfer.direction = JTAG_WRITE_XFER;
+
+ ioctl(jtag_fd, JTAG_IOCXFER, &xfer);
+
+JTAG_SIOCMODE
+------
+If hw driver can support different running modes you can change it.
+
+Example:
+ unsigned int mode;
+ mode = JTAG_XFER_HW_MODE;
+ ioctl(jtag_fd, JTAG_SIOCMODE, &mode);
--
1.7.1
^ permalink raw reply related
* [patch v21 3/4] Documentation: jtag: Add bindings for Aspeed SoC 24xx and 25xx families JTAG master driver
From: Oleksandr Shamray @ 2018-05-15 14:21 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526394095-5069-1-git-send-email-oleksandrs@mellanox.com>
It has been tested on Mellanox system with BMC equipped with
Aspeed 2520 SoC for programming CPLD devices.
Signed-off-by: Oleksandr Shamray <oleksandrs@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Rob Herring <robh@kernel.org>
---
v19->v20
v18->v19
v17->v18
v16->v17
v15->v16
Comments pointed by Joel Stanley <joel.stan@gmail.com>
- change clocks = <&clk_apb> to proper clocks = <&syscon ASPEED_CLK_APB>
- add reset descriptions in bndings file
v14->v15
v13->v14
v12->v13
v11->v12
v10->v11
v9->v10
v8->v9
v7->v8
Comments pointed by pointed by Joel Stanley <joel.stan@gmail.com>
- Change compatible string to ast2400 and ast2000
V6->v7
Comments pointed by Tobias Klauser <tklauser@distanz.ch>
- Fix spell "Doccumentation" -> "Documentation"
v5->v6
Comments pointed by Tobias Klauser <tklauser@distanz.ch>
- Small nit: s/documentation/Documentation/
v4->v5
V3->v4
Comments pointed by Rob Herring <robh@kernel.org>
- delete unnecessary "status" and "reg-shift" descriptions in
bndings file
v2->v3
Comments pointed by Rob Herring <robh@kernel.org>
- split Aspeed jtag driver and binding to sepatrate patches
- delete unnecessary "status" and "reg-shift" descriptions in
bndings file
---
.../devicetree/bindings/jtag/aspeed-jtag.txt | 22 ++++++++++++++++++++
1 files changed, 22 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
diff --git a/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt b/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
new file mode 100644
index 0000000..7c36eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
@@ -0,0 +1,22 @@
+Aspeed JTAG driver for ast2400 and ast2500 SoC
+
+Required properties:
+- compatible: Should be one of
+ - "aspeed,ast2400-jtag"
+ - "aspeed,ast2500-jtag"
+- reg contains the offset and length of the JTAG memory
+ region
+- clocks root clock of bus, should reference the APB
+ clock in the second cell
+- resets phandle to reset controller with the reset number in
+ the second cell
+- interrupts should contain JTAG controller interrupt
+
+Example:
+jtag: jtag at 1e6e4000 {
+ compatible = "aspeed,ast2500-jtag";
+ reg = <0x1e6e4000 0x1c>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_JTAG_MASTER>;
+ interrupts = <43>;
+};
--
1.7.1
^ permalink raw reply related
* [patch v21 2/4] drivers: jtag: Add Aspeed SoC 24xx and 25xx families JTAG master driver
From: Oleksandr Shamray @ 2018-05-15 14:21 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526394095-5069-1-git-send-email-oleksandrs@mellanox.com>
Driver adds support of Aspeed 2500/2400 series SOC JTAG master controller.
Driver implements the following jtag ops:
- freq_get;
- freq_set;
- status_get;
- idle;
- xfer;
It has been tested on Mellanox system with BMC equipped with
Aspeed 2520 SoC for programming CPLD devices.
Signed-off-by: Oleksandr Shamray <oleksandrs@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Joel Stanley <joel@jms.id.au>
---
v19->v20
Notifications from kbuild test robot <lkp@intel.com>
- add static declaration to 'aspeed_jtag_init' and
'aspeed_jtag_deinit' functions
v18->v19
v17->v18
v16->v17
v15->v16
Comments pointed by Joel Stanley <joel.stan@gmail.com>
- Add reset_control on Jtag init/deinit
v14->v15
Comments pointed by Joel Stanley <joel.stan@gmail.com>
- Add ARCH_ASPEED || COMPILE_TEST to Kconfig
- remove unused offset variable
- remove "aspeed_jtag" from dev_err and dev_dbg messages
- change clk_prepare_enable initialisation order
v13->v14
Comments pointed by Philippe Ombredanne <pombredanne@nexb.com>
- Change style of head block comment from /**/ to //
v12->v13
Comments pointed by Philippe Ombredanne <pombredanne@nexb.com>
- Change jtag-aspeed.c licence type to
SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
and reorder line with license in description
Comments pointed by Kun Yi <kunyi@google.com>
- Changed capability check for aspeed,ast2400-jtag/ast200-jtag
v11->v12
Comments pointed by Chip Bilbrey <chip@bilbrey.org>
- Remove access mode from xfer and idle transactions
- Add new ioctl JTAG_SIOCMODE for set hw mode
v10->v11
v9->v10
V8->v9
Comments pointed by Arnd Bergmann <arnd@arndb.de>
- add *data parameter to xfer function prototype
v7->v8
Comments pointed by Joel Stanley <joel.stan@gmail.com>
- aspeed_jtag_init replace goto to return;
- change input variables type from __u32 to u32
in functios freq_get, freq_set, status_get
- change sm_ variables type from char to u8
- in jatg_init add disable clocks on error case
- remove release_mem_region on error case
- remove devm_free_irq on jtag_deinit
- Fix misspelling Disabe/Disable
- Change compatible string to ast2400 and ast2000
v6->v7
Notifications from kbuild test robot <lkp@intel.com>
- Add include <linux/types.h> to jtag-asapeed.c
v5->v6
v4->v5
Comments pointed by Arnd Bergmann <arnd@arndb.de>
- Added HAS_IOMEM dependence in Kconfig to avoid
"undefined reference to `devm_ioremap_resource'" error,
because in some arch this not supported
v3->v4
Comments pointed by Arnd Bergmann <arnd@arndb.de>
- change transaction pointer tdio type to __u64
- change internal status type from enum to __u32
v2->v3
v1->v2
Comments pointed by Greg KH <gregkh@linuxfoundation.org>
- change license type from GPLv2/BSD to GPLv2
Comments pointed by Neil Armstrong <narmstrong@baylibre.com>
- Add clk_prepare_enable/clk_disable_unprepare in clock init/deinit
- Change .compatible to soc-specific compatible names
aspeed,aspeed4000-jtag/aspeed5000-jtag
- Added dt-bindings
Comments pointed by Arnd Bergmann <arnd@arndb.de>
- Reorder functions and removed the forward declarations
- Add static const qualifier to state machine states transitions
- Change .compatible to soc-specific compatible names
aspeed,aspeed4000-jtag/aspeed5000-jtag
- Add dt-bindings
Comments pointed by Randy Dunlap <rdunlap@infradead.org>
- Change module name jtag-aspeed in description in Kconfig
Comments pointed by kbuild test robot <lkp@intel.com>
- Remove invalid include <asm/mach-types.h>
- add resource_size instead of calculation
---
drivers/jtag/Kconfig | 14 +
drivers/jtag/Makefile | 1 +
drivers/jtag/jtag-aspeed.c | 786 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 801 insertions(+), 0 deletions(-)
create mode 100644 drivers/jtag/jtag-aspeed.c
diff --git a/drivers/jtag/Kconfig b/drivers/jtag/Kconfig
index 43eb9a4..6b43ac8 100644
--- a/drivers/jtag/Kconfig
+++ b/drivers/jtag/Kconfig
@@ -16,3 +16,17 @@ menuconfig JTAG
To compile this driver as a module, choose M here: the module will
be called jtag.
+
+menuconfig JTAG_ASPEED
+ tristate "Aspeed SoC JTAG controller support"
+ depends on JTAG && HAS_IOMEM
+ depends on ARCH_ASPEED || COMPILE_TEST
+ help
+ This provides a support for Aspeed JTAG device, equipped on
+ Aspeed SoC 24xx and 25xx families. Drivers allows programming
+ of hardware devices, connected to SoC through the JTAG interface.
+
+ If you want this support, you should say Y here.
+
+ To compile this driver as a module, choose M here: the module will
+ be called jtag-aspeed.
diff --git a/drivers/jtag/Makefile b/drivers/jtag/Makefile
index af37493..04a855e 100644
--- a/drivers/jtag/Makefile
+++ b/drivers/jtag/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_JTAG) += jtag.o
+obj-$(CONFIG_JTAG_ASPEED) += jtag-aspeed.o
diff --git a/drivers/jtag/jtag-aspeed.c b/drivers/jtag/jtag-aspeed.c
new file mode 100644
index 0000000..2d22de0
--- /dev/null
+++ b/drivers/jtag/jtag-aspeed.c
@@ -0,0 +1,786 @@
+// SPDX-License-Identifier: GPL-2.0
+// drivers/jtag/aspeed-jtag.c
+//
+// Copyright (c) 2018 Mellanox Technologies. All rights reserved.
+// Copyright (c) 2018 Oleksandr Shamray <oleksandrs@mellanox.com>
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/jtag.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <uapi/linux/jtag.h>
+
+#define ASPEED_JTAG_DATA 0x00
+#define ASPEED_JTAG_INST 0x04
+#define ASPEED_JTAG_CTRL 0x08
+#define ASPEED_JTAG_ISR 0x0C
+#define ASPEED_JTAG_SW 0x10
+#define ASPEED_JTAG_TCK 0x14
+#define ASPEED_JTAG_EC 0x18
+
+#define ASPEED_JTAG_DATA_MSB 0x01
+#define ASPEED_JTAG_DATA_CHUNK_SIZE 0x20
+
+/* ASPEED_JTAG_CTRL: Engine Control */
+#define ASPEED_JTAG_CTL_ENG_EN BIT(31)
+#define ASPEED_JTAG_CTL_ENG_OUT_EN BIT(30)
+#define ASPEED_JTAG_CTL_FORCE_TMS BIT(29)
+#define ASPEED_JTAG_CTL_INST_LEN(x) ((x) << 20)
+#define ASPEED_JTAG_CTL_LASPEED_INST BIT(17)
+#define ASPEED_JTAG_CTL_INST_EN BIT(16)
+#define ASPEED_JTAG_CTL_DR_UPDATE BIT(10)
+#define ASPEED_JTAG_CTL_DATA_LEN(x) ((x) << 4)
+#define ASPEED_JTAG_CTL_LASPEED_DATA BIT(1)
+#define ASPEED_JTAG_CTL_DATA_EN BIT(0)
+
+/* ASPEED_JTAG_ISR : Interrupt status and enable */
+#define ASPEED_JTAG_ISR_INST_PAUSE BIT(19)
+#define ASPEED_JTAG_ISR_INST_COMPLETE BIT(18)
+#define ASPEED_JTAG_ISR_DATA_PAUSE BIT(17)
+#define ASPEED_JTAG_ISR_DATA_COMPLETE BIT(16)
+#define ASPEED_JTAG_ISR_INST_PAUSE_EN BIT(3)
+#define ASPEED_JTAG_ISR_INST_COMPLETE_EN BIT(2)
+#define ASPEED_JTAG_ISR_DATA_PAUSE_EN BIT(1)
+#define ASPEED_JTAG_ISR_DATA_COMPLETE_EN BIT(0)
+#define ASPEED_JTAG_ISR_INT_EN_MASK GENMASK(3, 0)
+#define ASPEED_JTAG_ISR_INT_MASK GENMASK(19, 16)
+
+/* ASPEED_JTAG_SW : Software Mode and Status */
+#define ASPEED_JTAG_SW_MODE_EN BIT(19)
+#define ASPEED_JTAG_SW_MODE_TCK BIT(18)
+#define ASPEED_JTAG_SW_MODE_TMS BIT(17)
+#define ASPEED_JTAG_SW_MODE_TDIO BIT(16)
+
+/* ASPEED_JTAG_TCK : TCK Control */
+#define ASPEED_JTAG_TCK_DIVISOR_MASK GENMASK(10, 0)
+#define ASPEED_JTAG_TCK_GET_DIV(x) ((x) & ASPEED_JTAG_TCK_DIVISOR_MASK)
+
+/* ASPEED_JTAG_EC : Controller set for go to IDLE */
+#define ASPEED_JTAG_EC_GO_IDLE BIT(0)
+
+#define ASPEED_JTAG_IOUT_LEN(len) (ASPEED_JTAG_CTL_ENG_EN |\
+ ASPEED_JTAG_CTL_ENG_OUT_EN |\
+ ASPEED_JTAG_CTL_INST_LEN(len))
+
+#define ASPEED_JTAG_DOUT_LEN(len) (ASPEED_JTAG_CTL_ENG_EN |\
+ ASPEED_JTAG_CTL_ENG_OUT_EN |\
+ ASPEED_JTAG_CTL_DATA_LEN(len))
+
+#define ASPEED_JTAG_TCK_WAIT 10
+#define ASPEED_JTAG_RESET_CNTR 10
+
+#define ASPEED_JTAG_NAME "jtag-aspeed"
+
+struct aspeed_jtag {
+ void __iomem *reg_base;
+ struct device *dev;
+ struct clk *pclk;
+ enum jtag_endstate status;
+ int irq;
+ struct reset_control *rst;
+ u32 flag;
+ wait_queue_head_t jtag_wq;
+ u32 mode;
+};
+
+static char *end_status_str[] = {"idle", "ir pause", "drpause"};
+
+static u32 aspeed_jtag_read(struct aspeed_jtag *aspeed_jtag, u32 reg)
+{
+ return readl(aspeed_jtag->reg_base + reg);
+}
+
+static void
+aspeed_jtag_write(struct aspeed_jtag *aspeed_jtag, u32 val, u32 reg)
+{
+ writel(val, aspeed_jtag->reg_base + reg);
+}
+
+static int aspeed_jtag_freq_set(struct jtag *jtag, u32 freq)
+{
+ struct aspeed_jtag *aspeed_jtag = jtag_priv(jtag);
+ unsigned long apb_frq;
+ u32 tck_val;
+ u16 div;
+
+ apb_frq = clk_get_rate(aspeed_jtag->pclk);
+ div = (apb_frq % freq == 0) ? (apb_frq / freq) - 1 : (apb_frq / freq);
+ tck_val = aspeed_jtag_read(aspeed_jtag, ASPEED_JTAG_TCK);
+ aspeed_jtag_write(aspeed_jtag,
+ (tck_val & ASPEED_JTAG_TCK_DIVISOR_MASK) | div,
+ ASPEED_JTAG_TCK);
+ return 0;
+}
+
+static int aspeed_jtag_freq_get(struct jtag *jtag, u32 *frq)
+{
+ struct aspeed_jtag *aspeed_jtag = jtag_priv(jtag);
+ u32 pclk;
+ u32 tck;
+
+ pclk = clk_get_rate(aspeed_jtag->pclk);
+ tck = aspeed_jtag_read(aspeed_jtag, ASPEED_JTAG_TCK);
+ *frq = pclk / (ASPEED_JTAG_TCK_GET_DIV(tck) + 1);
+
+ return 0;
+}
+
+static int aspeed_jtag_mode_set(struct jtag *jtag, u32 mode)
+{
+ struct aspeed_jtag *aspeed_jtag = jtag_priv(jtag);
+
+ aspeed_jtag->mode = mode;
+ return 0;
+}
+
+static void aspeed_jtag_sw_delay(struct aspeed_jtag *aspeed_jtag, int cnt)
+{
+ int i;
+
+ for (i = 0; i < cnt; i++)
+ aspeed_jtag_read(aspeed_jtag, ASPEED_JTAG_SW);
+}
+
+static char aspeed_jtag_tck_cycle(struct aspeed_jtag *aspeed_jtag,
+ u8 tms, u8 tdi)
+{
+ char tdo = 0;
+
+ /* TCK = 0 */
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_SW_MODE_EN |
+ (tms * ASPEED_JTAG_SW_MODE_TMS) |
+ (tdi * ASPEED_JTAG_SW_MODE_TDIO), ASPEED_JTAG_SW);
+
+ aspeed_jtag_sw_delay(aspeed_jtag, ASPEED_JTAG_TCK_WAIT);
+
+ /* TCK = 1 */
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_SW_MODE_EN |
+ ASPEED_JTAG_SW_MODE_TCK |
+ (tms * ASPEED_JTAG_SW_MODE_TMS) |
+ (tdi * ASPEED_JTAG_SW_MODE_TDIO), ASPEED_JTAG_SW);
+
+ if (aspeed_jtag_read(aspeed_jtag, ASPEED_JTAG_SW) &
+ ASPEED_JTAG_SW_MODE_TDIO)
+ tdo = 1;
+
+ aspeed_jtag_sw_delay(aspeed_jtag, ASPEED_JTAG_TCK_WAIT);
+
+ /* TCK = 0 */
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_SW_MODE_EN |
+ (tms * ASPEED_JTAG_SW_MODE_TMS) |
+ (tdi * ASPEED_JTAG_SW_MODE_TDIO), ASPEED_JTAG_SW);
+ return tdo;
+}
+
+static void aspeed_jtag_wait_instruction_pause(struct aspeed_jtag *aspeed_jtag)
+{
+ wait_event_interruptible(aspeed_jtag->jtag_wq, aspeed_jtag->flag &
+ ASPEED_JTAG_ISR_INST_PAUSE);
+ aspeed_jtag->flag &= ~ASPEED_JTAG_ISR_INST_PAUSE;
+}
+
+static void
+aspeed_jtag_wait_instruction_complete(struct aspeed_jtag *aspeed_jtag)
+{
+ wait_event_interruptible(aspeed_jtag->jtag_wq, aspeed_jtag->flag &
+ ASPEED_JTAG_ISR_INST_COMPLETE);
+ aspeed_jtag->flag &= ~ASPEED_JTAG_ISR_INST_COMPLETE;
+}
+
+static void
+aspeed_jtag_wait_data_pause_complete(struct aspeed_jtag *aspeed_jtag)
+{
+ wait_event_interruptible(aspeed_jtag->jtag_wq, aspeed_jtag->flag &
+ ASPEED_JTAG_ISR_DATA_PAUSE);
+ aspeed_jtag->flag &= ~ASPEED_JTAG_ISR_DATA_PAUSE;
+}
+
+static void aspeed_jtag_wait_data_complete(struct aspeed_jtag *aspeed_jtag)
+{
+ wait_event_interruptible(aspeed_jtag->jtag_wq, aspeed_jtag->flag &
+ ASPEED_JTAG_ISR_DATA_COMPLETE);
+ aspeed_jtag->flag &= ~ASPEED_JTAG_ISR_DATA_COMPLETE;
+}
+
+static void aspeed_jtag_sm_cycle(struct aspeed_jtag *aspeed_jtag, const u8 *tms,
+ int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ aspeed_jtag_tck_cycle(aspeed_jtag, tms[i], 0);
+}
+
+static void aspeed_jtag_run_test_idle_sw(struct aspeed_jtag *aspeed_jtag,
+ struct jtag_run_test_idle *runtest)
+{
+ static const u8 sm_pause_irpause[] = {1, 1, 1, 1, 0, 1, 0};
+ static const u8 sm_pause_drpause[] = {1, 1, 1, 0, 1, 0};
+ static const u8 sm_idle_irpause[] = {1, 1, 0, 1, 0};
+ static const u8 sm_idle_drpause[] = {1, 0, 1, 0};
+ static const u8 sm_pause_idle[] = {1, 1, 0};
+ int i;
+
+ /* SW mode from idle/pause-> to pause/idle */
+ if (runtest->reset) {
+ for (i = 0; i < ASPEED_JTAG_RESET_CNTR; i++)
+ aspeed_jtag_tck_cycle(aspeed_jtag, 1, 0);
+ }
+
+ switch (aspeed_jtag->status) {
+ case JTAG_STATE_IDLE:
+ switch (runtest->endstate) {
+ case JTAG_STATE_PAUSEIR:
+ /* ->DRSCan->IRSCan->IRCap->IRExit1->PauseIR */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_idle_irpause,
+ sizeof(sm_idle_irpause));
+
+ aspeed_jtag->status = JTAG_STATE_PAUSEIR;
+ break;
+ case JTAG_STATE_PAUSEDR:
+ /* ->DRSCan->DRCap->DRExit1->PauseDR */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_idle_drpause,
+ sizeof(sm_idle_drpause));
+
+ aspeed_jtag->status = JTAG_STATE_PAUSEDR;
+ break;
+ case JTAG_STATE_IDLE:
+ /* IDLE */
+ aspeed_jtag_tck_cycle(aspeed_jtag, 0, 0);
+ aspeed_jtag->status = JTAG_STATE_IDLE;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case JTAG_STATE_PAUSEIR:
+ /* Fall-through */
+ case JTAG_STATE_PAUSEDR:
+ /* From IR/DR Pause */
+ switch (runtest->endstate) {
+ case JTAG_STATE_PAUSEIR:
+ /*
+ * to Exit2 IR/DR->Updt IR/DR->DRSCan->IRSCan->IRCap->
+ * IRExit1->PauseIR
+ */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_pause_irpause,
+ sizeof(sm_pause_irpause));
+
+ aspeed_jtag->status = JTAG_STATE_PAUSEIR;
+ break;
+ case JTAG_STATE_PAUSEDR:
+ /*
+ * to Exit2 IR/DR->Updt IR/DR->DRSCan->DRCap->
+ * DRExit1->PauseDR
+ */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_pause_drpause,
+ sizeof(sm_pause_drpause));
+ aspeed_jtag->status = JTAG_STATE_PAUSEDR;
+ break;
+ case JTAG_STATE_IDLE:
+ /* to Exit2 IR/DR->Updt IR/DR->IDLE */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_pause_idle,
+ sizeof(sm_pause_idle));
+ aspeed_jtag->status = JTAG_STATE_IDLE;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ default:
+ dev_err(aspeed_jtag->dev, "aspeed_jtag_run_test_idle error\n");
+ break;
+ }
+
+ /* Stay on IDLE for at least TCK cycle */
+ for (i = 0; i < runtest->tck; i++)
+ aspeed_jtag_tck_cycle(aspeed_jtag, 0, 0);
+}
+
+/**
+ * aspeed_jtag_run_test_idle:
+ * JTAG reset: generates at least 9 TMS high and 1 TMS low to force
+ * devices into Run-Test/Idle State.
+ */
+static int aspeed_jtag_idle(struct jtag *jtag,
+ struct jtag_run_test_idle *runtest)
+{
+ struct aspeed_jtag *aspeed_jtag = jtag_priv(jtag);
+
+ dev_dbg(aspeed_jtag->dev, "runtest, status:%d, mode:%s, state:%s, reset:%d, tck:%d\n",
+ aspeed_jtag->status,
+ aspeed_jtag->mode & JTAG_XFER_HW_MODE ? "HW" : "SW",
+ end_status_str[runtest->endstate], runtest->reset,
+ runtest->tck);
+
+ if (!(aspeed_jtag->mode & JTAG_XFER_HW_MODE)) {
+ aspeed_jtag_run_test_idle_sw(aspeed_jtag, runtest);
+ return 0;
+ }
+
+ /* Disable sw mode */
+ aspeed_jtag_write(aspeed_jtag, 0, ASPEED_JTAG_SW);
+ /* x TMS high + 1 TMS low */
+ if (runtest->reset)
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_CTL_ENG_EN |
+ ASPEED_JTAG_CTL_ENG_OUT_EN |
+ ASPEED_JTAG_CTL_FORCE_TMS, ASPEED_JTAG_CTRL);
+ else
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_EC_GO_IDLE,
+ ASPEED_JTAG_EC);
+
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_SW_MODE_EN |
+ ASPEED_JTAG_SW_MODE_TDIO, ASPEED_JTAG_SW);
+
+ aspeed_jtag->status = JTAG_STATE_IDLE;
+ return 0;
+}
+
+static void aspeed_jtag_xfer_sw(struct aspeed_jtag *aspeed_jtag,
+ struct jtag_xfer *xfer, unsigned long *data)
+{
+ unsigned long remain_xfer = xfer->length;
+ unsigned long shift_bits = 0;
+ unsigned long index = 0;
+ unsigned long tdi;
+ char tdo;
+
+ if (xfer->direction == JTAG_READ_XFER)
+ tdi = UINT_MAX;
+ else
+ tdi = data[index];
+
+ while (remain_xfer > 1) {
+ tdo = aspeed_jtag_tck_cycle(aspeed_jtag, 0,
+ tdi & ASPEED_JTAG_DATA_MSB);
+ data[index] |= tdo << (shift_bits %
+ ASPEED_JTAG_DATA_CHUNK_SIZE);
+
+ tdi >>= 1;
+ shift_bits++;
+ remain_xfer--;
+
+ if (shift_bits % ASPEED_JTAG_DATA_CHUNK_SIZE == 0) {
+ dev_dbg(aspeed_jtag->dev, "R/W data[%lu]:%lx\n",
+ index, data[index]);
+
+ tdo = 0;
+ index++;
+
+ if (xfer->direction == JTAG_READ_XFER)
+ tdi = UINT_MAX;
+ else
+ tdi = data[index];
+ }
+ }
+
+ tdo = aspeed_jtag_tck_cycle(aspeed_jtag, 1, tdi & ASPEED_JTAG_DATA_MSB);
+ data[index] |= tdo << (shift_bits % ASPEED_JTAG_DATA_CHUNK_SIZE);
+}
+
+static void aspeed_jtag_xfer_push_data(struct aspeed_jtag *aspeed_jtag,
+ enum jtag_xfer_type type, u32 bits_len)
+{
+ dev_dbg(aspeed_jtag->dev, "shift bits %d\n", bits_len);
+
+ if (type == JTAG_SIR_XFER) {
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_IOUT_LEN(bits_len),
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_DOUT_LEN(bits_len) |
+ ASPEED_JTAG_CTL_INST_EN, ASPEED_JTAG_CTRL);
+ } else {
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_DOUT_LEN(bits_len),
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_DOUT_LEN(bits_len) |
+ ASPEED_JTAG_CTL_DATA_EN, ASPEED_JTAG_CTRL);
+ }
+}
+
+static void aspeed_jtag_xfer_push_data_last(struct aspeed_jtag *aspeed_jtag,
+ enum jtag_xfer_type type,
+ u32 shift_bits,
+ enum jtag_endstate endstate)
+{
+ if (endstate != JTAG_STATE_IDLE) {
+ if (type == JTAG_SIR_XFER) {
+ dev_dbg(aspeed_jtag->dev, "IR Keep Pause\n");
+
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_IOUT_LEN(shift_bits),
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_IOUT_LEN(shift_bits) |
+ ASPEED_JTAG_CTL_INST_EN,
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_wait_instruction_pause(aspeed_jtag);
+ } else {
+ dev_dbg(aspeed_jtag->dev, "DR Keep Pause\n");
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_DOUT_LEN(shift_bits) |
+ ASPEED_JTAG_CTL_DR_UPDATE,
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_DOUT_LEN(shift_bits) |
+ ASPEED_JTAG_CTL_DR_UPDATE |
+ ASPEED_JTAG_CTL_DATA_EN,
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_wait_data_pause_complete(aspeed_jtag);
+ }
+ } else {
+ if (type == JTAG_SIR_XFER) {
+ dev_dbg(aspeed_jtag->dev, "IR go IDLE\n");
+
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_IOUT_LEN(shift_bits) |
+ ASPEED_JTAG_CTL_LASPEED_INST,
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_IOUT_LEN(shift_bits) |
+ ASPEED_JTAG_CTL_LASPEED_INST |
+ ASPEED_JTAG_CTL_INST_EN,
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_wait_instruction_complete(aspeed_jtag);
+ } else {
+ dev_dbg(aspeed_jtag->dev, "DR go IDLE\n");
+
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_DOUT_LEN(shift_bits) |
+ ASPEED_JTAG_CTL_LASPEED_DATA,
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_write(aspeed_jtag,
+ ASPEED_JTAG_DOUT_LEN(shift_bits) |
+ ASPEED_JTAG_CTL_LASPEED_DATA |
+ ASPEED_JTAG_CTL_DATA_EN,
+ ASPEED_JTAG_CTRL);
+ aspeed_jtag_wait_data_complete(aspeed_jtag);
+ }
+ }
+}
+
+static void aspeed_jtag_xfer_hw(struct aspeed_jtag *aspeed_jtag,
+ struct jtag_xfer *xfer, unsigned long *data)
+{
+ unsigned long remain_xfer = xfer->length;
+ unsigned long index = 0;
+ char shift_bits;
+ u32 data_reg;
+
+ data_reg = xfer->type == JTAG_SIR_XFER ?
+ ASPEED_JTAG_INST : ASPEED_JTAG_DATA;
+ while (remain_xfer) {
+ if (xfer->direction == JTAG_WRITE_XFER) {
+ dev_dbg(aspeed_jtag->dev, "W dr->dr_data[%lu]:%lx\n",
+ index, data[index]);
+
+ aspeed_jtag_write(aspeed_jtag, data[index], data_reg);
+ } else {
+ aspeed_jtag_write(aspeed_jtag, 0, data_reg);
+ }
+
+ if (remain_xfer > ASPEED_JTAG_DATA_CHUNK_SIZE) {
+ shift_bits = ASPEED_JTAG_DATA_CHUNK_SIZE;
+
+ /*
+ * Read bytes were not equals to column length
+ * and go to Pause-DR
+ */
+ aspeed_jtag_xfer_push_data(aspeed_jtag, xfer->type,
+ shift_bits);
+ } else {
+ /*
+ * Read bytes equals to column length =>
+ * Update-DR
+ */
+ shift_bits = remain_xfer;
+ aspeed_jtag_xfer_push_data_last(aspeed_jtag, xfer->type,
+ shift_bits,
+ xfer->endstate);
+ }
+
+ if (xfer->direction == JTAG_READ_XFER) {
+ if (shift_bits < ASPEED_JTAG_DATA_CHUNK_SIZE) {
+ data[index] = aspeed_jtag_read(aspeed_jtag,
+ data_reg);
+
+ data[index] >>= ASPEED_JTAG_DATA_CHUNK_SIZE -
+ shift_bits;
+ } else {
+ data[index] = aspeed_jtag_read(aspeed_jtag,
+ data_reg);
+ }
+ dev_dbg(aspeed_jtag->dev, "R dr->dr_data[%lu]:%lx\n",
+ index, data[index]);
+ }
+
+ remain_xfer = remain_xfer - shift_bits;
+ index++;
+ dev_dbg(aspeed_jtag->dev, "remain_xfer %lu\n", remain_xfer);
+ }
+}
+
+static int aspeed_jtag_xfer(struct jtag *jtag, struct jtag_xfer *xfer,
+ u8 *xfer_data)
+{
+ static const u8 sm_update_shiftir[] = {1, 1, 0, 0};
+ static const u8 sm_update_shiftdr[] = {1, 0, 0};
+ static const u8 sm_pause_idle[] = {1, 1, 0};
+ static const u8 sm_pause_update[] = {1, 1};
+ struct aspeed_jtag *aspeed_jtag = jtag_priv(jtag);
+ unsigned long *data = (unsigned long *)xfer_data;
+ unsigned long remain_xfer = xfer->length;
+ char dbg_str[256];
+ int pos = 0;
+ int i;
+
+ for (i = 0; i <= xfer->length / BITS_PER_BYTE; i++) {
+ pos += snprintf(&dbg_str[pos], sizeof(dbg_str) - pos,
+ "0x%02x ", xfer_data[i]);
+ }
+
+ dev_dbg(aspeed_jtag->dev, " %s %s xfer, mode:%s, END:%d, len:%lu, TDI[%s]\n",
+ xfer->type == JTAG_SIR_XFER ? "SIR" : "SDR",
+ xfer->direction == JTAG_READ_XFER ? "READ" : "WRITE",
+ aspeed_jtag->mode & JTAG_XFER_HW_MODE ? "HW" : "SW",
+ xfer->endstate, remain_xfer, dbg_str);
+
+ if (!(aspeed_jtag->mode & JTAG_XFER_HW_MODE)) {
+ /* SW mode */
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_SW_MODE_EN |
+ ASPEED_JTAG_SW_MODE_TDIO, ASPEED_JTAG_SW);
+
+ if (aspeed_jtag->status != JTAG_STATE_IDLE) {
+ /*IR/DR Pause->Exit2 IR / DR->Update IR /DR */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_pause_update,
+ sizeof(sm_pause_update));
+ }
+
+ if (xfer->type == JTAG_SIR_XFER)
+ /* ->IRSCan->CapIR->ShiftIR */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_update_shiftir,
+ sizeof(sm_update_shiftir));
+ else
+ /* ->DRScan->DRCap->DRShift */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_update_shiftdr,
+ sizeof(sm_update_shiftdr));
+
+ aspeed_jtag_xfer_sw(aspeed_jtag, xfer, data);
+
+ /* DIPause/DRPause */
+ aspeed_jtag_tck_cycle(aspeed_jtag, 0, 0);
+
+ if (xfer->endstate == JTAG_STATE_IDLE) {
+ /* ->DRExit2->DRUpdate->IDLE */
+ aspeed_jtag_sm_cycle(aspeed_jtag, sm_pause_idle,
+ sizeof(sm_pause_idle));
+ }
+ } else {
+ /* hw mode */
+ aspeed_jtag_write(aspeed_jtag, 0, ASPEED_JTAG_SW);
+ aspeed_jtag_xfer_hw(aspeed_jtag, xfer, data);
+ }
+
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_SW_MODE_EN |
+ ASPEED_JTAG_SW_MODE_TDIO, ASPEED_JTAG_SW);
+ aspeed_jtag->status = xfer->endstate;
+ return 0;
+}
+
+static int aspeed_jtag_status_get(struct jtag *jtag, u32 *status)
+{
+ struct aspeed_jtag *aspeed_jtag = jtag_priv(jtag);
+
+ *status = aspeed_jtag->status;
+ return 0;
+}
+
+static irqreturn_t aspeed_jtag_interrupt(s32 this_irq, void *dev_id)
+{
+ struct aspeed_jtag *aspeed_jtag = dev_id;
+ irqreturn_t ret;
+ u32 status;
+
+ status = aspeed_jtag_read(aspeed_jtag, ASPEED_JTAG_ISR);
+ dev_dbg(aspeed_jtag->dev, "status %x\n", status);
+
+ if (status & ASPEED_JTAG_ISR_INT_MASK) {
+ aspeed_jtag_write(aspeed_jtag,
+ (status & ASPEED_JTAG_ISR_INT_MASK)
+ | (status & ASPEED_JTAG_ISR_INT_EN_MASK),
+ ASPEED_JTAG_ISR);
+ aspeed_jtag->flag |= status & ASPEED_JTAG_ISR_INT_MASK;
+ }
+
+ if (aspeed_jtag->flag) {
+ wake_up_interruptible(&aspeed_jtag->jtag_wq);
+ ret = IRQ_HANDLED;
+ } else {
+ dev_err(aspeed_jtag->dev, "irq status:%x\n",
+ status);
+ ret = IRQ_NONE;
+ }
+ return ret;
+}
+
+static int aspeed_jtag_init(struct platform_device *pdev,
+ struct aspeed_jtag *aspeed_jtag)
+{
+ struct resource *res;
+ int err;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ aspeed_jtag->reg_base = devm_ioremap_resource(aspeed_jtag->dev, res);
+ if (IS_ERR(aspeed_jtag->reg_base))
+ return -ENOMEM;
+
+ aspeed_jtag->pclk = devm_clk_get(aspeed_jtag->dev, NULL);
+ if (IS_ERR(aspeed_jtag->pclk)) {
+ dev_err(aspeed_jtag->dev, "devm_clk_get failed\n");
+ return PTR_ERR(aspeed_jtag->pclk);
+ }
+
+ aspeed_jtag->irq = platform_get_irq(pdev, 0);
+ if (aspeed_jtag->irq < 0) {
+ dev_err(aspeed_jtag->dev, "no irq specified\n");
+ return -ENOENT;
+ }
+
+ clk_prepare_enable(aspeed_jtag->pclk);
+
+ aspeed_jtag->rst = devm_reset_control_get_shared(aspeed_jtag->dev,
+ NULL);
+ if (IS_ERR(aspeed_jtag->rst)) {
+ dev_err(aspeed_jtag->dev,
+ "missing or invalid reset controller device tree entry");
+ return PTR_ERR(aspeed_jtag->rst);
+ }
+ reset_control_deassert(aspeed_jtag->rst);
+
+ /* Enable clock */
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_CTL_ENG_EN |
+ ASPEED_JTAG_CTL_ENG_OUT_EN, ASPEED_JTAG_CTRL);
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_SW_MODE_EN |
+ ASPEED_JTAG_SW_MODE_TDIO, ASPEED_JTAG_SW);
+
+ err = devm_request_irq(aspeed_jtag->dev, aspeed_jtag->irq,
+ aspeed_jtag_interrupt, 0,
+ "aspeed-jtag", aspeed_jtag);
+ if (err) {
+ dev_err(aspeed_jtag->dev, "unable to get IRQ");
+ goto clk_unprep;
+ }
+ dev_dbg(&pdev->dev, "IRQ %d.\n", aspeed_jtag->irq);
+
+ aspeed_jtag_write(aspeed_jtag, ASPEED_JTAG_ISR_INST_PAUSE |
+ ASPEED_JTAG_ISR_INST_COMPLETE |
+ ASPEED_JTAG_ISR_DATA_PAUSE |
+ ASPEED_JTAG_ISR_DATA_COMPLETE |
+ ASPEED_JTAG_ISR_INST_PAUSE_EN |
+ ASPEED_JTAG_ISR_INST_COMPLETE_EN |
+ ASPEED_JTAG_ISR_DATA_PAUSE_EN |
+ ASPEED_JTAG_ISR_DATA_COMPLETE_EN,
+ ASPEED_JTAG_ISR);
+
+ aspeed_jtag->flag = 0;
+ aspeed_jtag->mode = 0;
+ init_waitqueue_head(&aspeed_jtag->jtag_wq);
+ return 0;
+
+clk_unprep:
+ clk_disable_unprepare(aspeed_jtag->pclk);
+ return err;
+}
+
+static int aspeed_jtag_deinit(struct platform_device *pdev,
+ struct aspeed_jtag *aspeed_jtag)
+{
+ aspeed_jtag_write(aspeed_jtag, 0, ASPEED_JTAG_ISR);
+ /* Disable clock */
+ aspeed_jtag_write(aspeed_jtag, 0, ASPEED_JTAG_CTRL);
+ reset_control_assert(aspeed_jtag->rst);
+ clk_disable_unprepare(aspeed_jtag->pclk);
+ return 0;
+}
+
+static const struct jtag_ops aspeed_jtag_ops = {
+ .freq_get = aspeed_jtag_freq_get,
+ .freq_set = aspeed_jtag_freq_set,
+ .status_get = aspeed_jtag_status_get,
+ .idle = aspeed_jtag_idle,
+ .xfer = aspeed_jtag_xfer,
+ .mode_set = aspeed_jtag_mode_set
+};
+
+static int aspeed_jtag_probe(struct platform_device *pdev)
+{
+ struct aspeed_jtag *aspeed_jtag;
+ struct device *dev;
+ struct jtag *jtag;
+ int err;
+
+ dev = &pdev->dev;
+ jtag = jtag_alloc(sizeof(*aspeed_jtag), &aspeed_jtag_ops);
+ if (!jtag)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, jtag);
+ aspeed_jtag = jtag_priv(jtag);
+ aspeed_jtag->dev = &pdev->dev;
+
+ /* Initialize device*/
+ err = aspeed_jtag_init(pdev, aspeed_jtag);
+ if (err)
+ goto err_jtag_init;
+
+ /* Initialize JTAG core structure*/
+ err = jtag_register(jtag);
+ if (err)
+ goto err_jtag_register;
+
+ return 0;
+
+err_jtag_register:
+ aspeed_jtag_deinit(pdev, aspeed_jtag);
+err_jtag_init:
+ jtag_free(jtag);
+ return err;
+}
+
+static int aspeed_jtag_remove(struct platform_device *pdev)
+{
+ struct jtag *jtag;
+
+ jtag = platform_get_drvdata(pdev);
+ aspeed_jtag_deinit(pdev, jtag_priv(jtag));
+ jtag_unregister(jtag);
+ jtag_free(jtag);
+ return 0;
+}
+
+static const struct of_device_id aspeed_jtag_of_match[] = {
+ { .compatible = "aspeed,ast2400-jtag", },
+ { .compatible = "aspeed,ast2500-jtag", },
+ {}
+};
+
+static struct platform_driver aspeed_jtag_driver = {
+ .probe = aspeed_jtag_probe,
+ .remove = aspeed_jtag_remove,
+ .driver = {
+ .name = ASPEED_JTAG_NAME,
+ .of_match_table = aspeed_jtag_of_match,
+ },
+};
+module_platform_driver(aspeed_jtag_driver);
+
+MODULE_AUTHOR("Oleksandr Shamray <oleksandrs@mellanox.com>");
+MODULE_DESCRIPTION("ASPEED JTAG driver");
+MODULE_LICENSE("GPL v2");
--
1.7.1
^ permalink raw reply related
* [patch v21 1/4] drivers: jtag: Add JTAG core driver
From: Oleksandr Shamray @ 2018-05-15 14:21 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1526394095-5069-1-git-send-email-oleksandrs@mellanox.com>
Initial patch for JTAG driver
JTAG class driver provide infrastructure to support hardware/software
JTAG platform drivers. It provide user layer API interface for flashing
and debugging external devices which equipped with JTAG interface
using standard transactions.
Driver exposes set of IOCTL to user space for:
- XFER:
- SIR (Scan Instruction Register, IEEE 1149.1 Data Register scan);
- SDR (Scan Data Register, IEEE 1149.1 Instruction Register scan);
- RUNTEST (Forces the IEEE 1149.1 bus to a run state for a specified
number of clocks).
- SIOCFREQ/GIOCFREQ for setting and reading JTAG frequency.
Driver core provides set of internal APIs for allocation and
registration:
- jtag_register;
- jtag_unregister;
- jtag_alloc;
- jtag_free;
Platform driver on registration with jtag-core creates the next
entry in dev folder:
/dev/jtagX
Signed-off-by: Oleksandr Shamray <oleksandrs@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
---
v20->v21
Comments pointed by Randy Dunlap <rdunlap@infradead.org>
- Fix JTAG dirver help in Kconfig
v19->v20
Comments pointed by Randy Dunlap <rdunlap@infradead.org>
- Fix JTAG dirver help in Kconfig
Notifications from kbuild test robot <lkp@intel.com>
- fix incompatible type casts
v18->v19
Comments pointed by Julia Cartwright <juliac@eso.teric.us>
- Fix memory leak on jtag_alloc exit
v17->v18
Comments pointed by Julia Cartwright <juliac@eso.teric.us>
- Change to return -EOPNOTSUPP in case of error in JTAG_GIOCFREQ
- Add ops callbacks check to jtag_alloc
- Add err check for copy_to_user
- Move the kfree() above the if (err) in JTAG_IOCXFER
- remove unnecessary check for error after put_user
- add padding to struct jtag_xfer
v16->v17
Comments pointed by Julia Cartwright <juliac@eso.teric.us>
- Fix memory allocation on jtag alloc
- Move out unnecessary form lock on jtag open
- Rework jtag register behavior
v15->v16
Commen ts pointed by Florian Fainelli <f.fainelli@gmail.com>
- move check jtag->ops->* in ioctl before get_user()
- change error type -EINVAL --> -EBUSY on open already opened jtag
- remove unnecessary ARCH_DMA_MINALIGN flag from kzalloc
- remove define ARCH_DMA_MINALIGN
v14->v15
v13->v14
Comments pointed by Philippe Ombredanne <pombredanne@nexb.com>
- Change style of head block comment from /**/ to //
v12->v13
Comments pointed by Philippe Ombredanne <pombredanne@nexb.com>
- Change jtag.c licence type to
SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
and reorder line with license in description
v11->v12
Comments pointed by Greg KH <gregkh@linuxfoundation.org>
- Change jtag.h licence type to
SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
and reorder line with license in description
Chip Bilbrey <chip@bilbrey.org>
- Remove Apeed reference from uapi jtag.h header
- Remove access mode from xfer and idle transactions
- Add new ioctl JTAG_SIOCMODE for set hw mode
- Add only one open per JTAG port blocking with mutex blocking
v10->v11
Notifications from kbuild test robot <lkp@intel.com>
- include types.h headeri to jtag.h
- fix incompatible type of xfer callback
- remove rdundant class defination
- Fix return order in case of xfer error
V9->v10
Comments pointed by Greg KH <gregkh@linuxfoundation.org>
- remove unnecessary alignment for pirv data
- move jtag_copy_to_user and jtag_copy_from_user code just to ioctl
- move int jtag_run_test_idle_op and jtag_xfer_op code
just to ioctl
- change return error codes to more applicable
- add missing error checks
- fix error check order in ioctl
- remove unnecessary blank lines
- add param validation to ioctl
- remove compat_ioctl
- remove only one open per JTAG port blocking.
User will care about this.
- Fix idr memory leak on jtag_exit
- change cdev device type to misc
V8->v9
Comments pointed by Arnd Bergmann <arnd@arndb.de>
- use get_user() instead of __get_user().
- change jtag->open type from int to atomic_t
- remove spinlock on jtg_open
- remove mutex on jtag_register
- add unregister_chrdev_region on jtag_init err
- add unregister_chrdev_region on jtag_exit
- remove unnecessary pointer casts
- add *data parameter to xfer function prototype
v7->v8
Comments pointed by Moritz Fischer <moritz.fischer@ettus.com>
- Fix misspelling s/friver/driver
v6->v7
Notifications from kbuild test robot <lkp@intel.com>
- Remove include asm/types.h from jtag.h
- Add include <linux/types.h> to jtag.c
v5->v6
v4->v5
v3->v4
Comments pointed by Arnd Bergmann <arnd@arndb.de>
- change transaction pointer tdio type to __u64
- change internal status type from enum to __u32
- reorder jtag_xfer members to avoid the implied padding
- add __packed attribute to jtag_xfer and jtag_run_test_idle
v2->v3
Notifications from kbuild test robot <lkp@intel.com>
- Change include path to <linux/types.h> in jtag.h
v1->v2
Comments pointed by Greg KH <gregkh@linuxfoundation.org>
- Change license type from GPLv2/BSD to GPLv2
- Change type of variables which crossed user/kernel to __type
- Remove "default n" from Kconfig
Comments pointed by Andrew Lunn <andrew@lunn.ch>
- Change list_add_tail in jtag_unregister to list_del
Comments pointed by Neil Armstrong <narmstrong@baylibre.com>
- Add SPDX-License-Identifier instead of license text
Comments pointed by Arnd Bergmann <arnd@arndb.de>
- Change __copy_to_user to memdup_user
- Change __put_user to put_user
- Change type of variables to __type for compatible 32 and 64-bit systems
- Add check for maximum xfer data size
- Change lookup data mechanism to get jtag data from inode
- Add .compat_ioctl to file ops
- Add mem alignment for jtag priv data
Comments pointed by Tobias Klauser <tklauser@distanz.ch>
- Change function names to avoid match with variable types
- Fix description for jtag_ru_test_idle in uapi jtag.h
- Fix misprints IDEL/IDLE, trough/through
---
Documentation/ioctl/ioctl-number.txt | 2 +
MAINTAINERS | 10 ++
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/jtag/Kconfig | 18 +++
drivers/jtag/Makefile | 1 +
drivers/jtag/jtag.c | 274 ++++++++++++++++++++++++++++++++++
include/linux/jtag.h | 41 +++++
include/uapi/linux/jtag.h | 105 +++++++++++++
9 files changed, 454 insertions(+), 0 deletions(-)
create mode 100644 drivers/jtag/Kconfig
create mode 100644 drivers/jtag/Makefile
create mode 100644 drivers/jtag/jtag.c
create mode 100644 include/linux/jtag.h
create mode 100644 include/uapi/linux/jtag.h
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 7f7413e..c5548b5 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -318,6 +318,8 @@ Code Seq#(hex) Include File Comments
0xB0 all RATIO devices in development:
<mailto:vgo@ratio.de>
0xB1 00-1F PPPoX <mailto:mostrows@styx.uwaterloo.ca>
+0xB2 00-0f linux/jtag.h JTAG driver
+ <mailto:oleksandrs@mellanox.com>
0xB3 00 linux/mmc/ioctl.h
0xB4 00-0F linux/gpio.h <mailto:linux-gpio@vger.kernel.org>
0xB5 00-0F uapi/linux/rpmsg.h <mailto:linux-remoteproc@vger.kernel.org>
diff --git a/MAINTAINERS b/MAINTAINERS
index 79bb02f..2fd22d6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7610,6 +7610,16 @@ L: linux-serial at vger.kernel.org
S: Maintained
F: drivers/tty/serial/jsm/
+JTAG SUBSYSTEM
+M: Oleksandr Shamray <oleksandrs@mellanox.com>
+M: Vadim Pasternak <vadimp@mellanox.com>
+S: Maintained
+F: include/linux/jtag.h
+F: include/uapi/linux/jtag.h
+F: drivers/jtag/
+F: Documentation/devicetree/bindings/jtag/
+F: Documentation/ABI/testing/jtag-cdev
+
K10TEMP HARDWARE MONITORING DRIVER
M: Clemens Ladisch <clemens@ladisch.de>
L: linux-hwmon at vger.kernel.org
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 95b9ccc..bb71e48 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -217,4 +217,6 @@ source "drivers/siox/Kconfig"
source "drivers/slimbus/Kconfig"
+source "drivers/jtag/Kconfig"
+
endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 24cd470..c92636b 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -185,3 +185,4 @@ obj-$(CONFIG_TEE) += tee/
obj-$(CONFIG_MULTIPLEXER) += mux/
obj-$(CONFIG_UNISYS_VISORBUS) += visorbus/
obj-$(CONFIG_SIOX) += siox/
+obj-$(CONFIG_JTAG) += jtag/
diff --git a/drivers/jtag/Kconfig b/drivers/jtag/Kconfig
new file mode 100644
index 0000000..43eb9a4
--- /dev/null
+++ b/drivers/jtag/Kconfig
@@ -0,0 +1,18 @@
+menuconfig JTAG
+ tristate "JTAG support"
+ help
+ This provides basic core functionality support for JTAG class devices.
+ Hardware that is equipped with a JTAG microcontroller can be
+ supported by using this driver's interfaces.
+ This driver exposes a set of IOCTLs to the user space for
+ the following commands:
+ SDR: (Scan Data Register) Performs an IEEE 1149.1 Data Register scan
+ SIR: (Scan Instruction Register) Performs an IEEE 1149.1 Instruction
+ Register scan.
+ RUNTEST: Forces the IEEE 1149.1 bus to a run state for a specified
+ number of clocks or a specified time period.
+
+ If you want this support, you should say Y here.
+
+ To compile this driver as a module, choose M here: the module will
+ be called jtag.
diff --git a/drivers/jtag/Makefile b/drivers/jtag/Makefile
new file mode 100644
index 0000000..af37493
--- /dev/null
+++ b/drivers/jtag/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_JTAG) += jtag.o
diff --git a/drivers/jtag/jtag.c b/drivers/jtag/jtag.c
new file mode 100644
index 0000000..84c29c8
--- /dev/null
+++ b/drivers/jtag/jtag.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// drivers/jtag/jtag.c
+//
+// Copyright (c) 2018 Mellanox Technologies. All rights reserved.
+// Copyright (c) 2018 Oleksandr Shamray <oleksandrs@mellanox.com>
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/jtag.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/rtnetlink.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <uapi/linux/jtag.h>
+
+#define JTAG_NAME "jtag0"
+#define MAX_JTAG_NAME_LEN (sizeof("jtag") + 5)
+
+struct jtag {
+ struct miscdevice miscdev;
+ struct device *dev;
+ const struct jtag_ops *ops;
+ int id;
+ bool opened;
+ struct mutex open_lock;
+ unsigned long priv[0];
+};
+
+static DEFINE_IDA(jtag_ida);
+
+void *jtag_priv(struct jtag *jtag)
+{
+ return jtag->priv;
+}
+EXPORT_SYMBOL_GPL(jtag_priv);
+
+static long jtag_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct jtag *jtag = file->private_data;
+ struct jtag_run_test_idle idle;
+ struct jtag_xfer xfer;
+ u8 *xfer_data;
+ u32 data_size;
+ u32 value;
+ int err;
+
+ if (!arg)
+ return -EINVAL;
+
+ switch (cmd) {
+ case JTAG_GIOCFREQ:
+ if (!jtag->ops->freq_get)
+ return -EOPNOTSUPP;
+
+ err = jtag->ops->freq_get(jtag, &value);
+ if (err)
+ break;
+
+ if (put_user(value, (__u32 __user *)arg))
+ err = -EFAULT;
+ break;
+
+ case JTAG_SIOCFREQ:
+ if (!jtag->ops->freq_set)
+ return -EOPNOTSUPP;
+
+ if (get_user(value, (__u32 __user *)arg))
+ return -EFAULT;
+ if (value == 0)
+ return -EINVAL;
+
+ err = jtag->ops->freq_set(jtag, value);
+ break;
+
+ case JTAG_IOCRUNTEST:
+ if (copy_from_user(&idle, (const void __user *)arg,
+ sizeof(struct jtag_run_test_idle)))
+ return -EFAULT;
+
+ if (idle.endstate > JTAG_STATE_PAUSEDR)
+ return -EINVAL;
+
+ err = jtag->ops->idle(jtag, &idle);
+ break;
+
+ case JTAG_IOCXFER:
+ if (copy_from_user(&xfer, (const void __user *)arg,
+ sizeof(struct jtag_xfer)))
+ return -EFAULT;
+
+ if (xfer.length >= JTAG_MAX_XFER_DATA_LEN)
+ return -EINVAL;
+
+ if (xfer.type > JTAG_SDR_XFER)
+ return -EINVAL;
+
+ if (xfer.direction > JTAG_WRITE_XFER)
+ return -EINVAL;
+
+ if (xfer.endstate > JTAG_STATE_PAUSEDR)
+ return -EINVAL;
+
+ data_size = DIV_ROUND_UP(xfer.length, BITS_PER_BYTE);
+ xfer_data = memdup_user(u64_to_user_ptr(xfer.tdio), data_size);
+
+ if (IS_ERR(xfer_data))
+ return -EFAULT;
+
+ err = jtag->ops->xfer(jtag, &xfer, xfer_data);
+ if (err) {
+ kfree(xfer_data);
+ return -EFAULT;
+ }
+
+ err = copy_to_user(u64_to_user_ptr(xfer.tdio),
+ (void *)(xfer_data), data_size);
+ kfree(xfer_data);
+ if (err)
+ return -EFAULT;
+
+ if (copy_to_user((void __user *)arg, (void *)&xfer,
+ sizeof(struct jtag_xfer)))
+ return -EFAULT;
+ break;
+
+ case JTAG_GIOCSTATUS:
+ err = jtag->ops->status_get(jtag, &value);
+ if (err)
+ break;
+
+ err = put_user(value, (__u32 __user *)arg);
+ break;
+ case JTAG_SIOCMODE:
+ if (get_user(value, (__u32 __user *)arg))
+ return -EFAULT;
+ if (value == 0)
+ return -EINVAL;
+
+ err = jtag->ops->mode_set(jtag, value);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return err;
+}
+
+static int jtag_open(struct inode *inode, struct file *file)
+{
+ struct jtag *jtag = container_of(file->private_data, struct jtag,
+ miscdev);
+
+ if (mutex_lock_interruptible(&jtag->open_lock))
+ return -ERESTARTSYS;
+
+ if (jtag->opened) {
+ mutex_unlock(&jtag->open_lock);
+ return -EBUSY;
+ }
+ jtag->opened = true;
+ mutex_unlock(&jtag->open_lock);
+
+ nonseekable_open(inode, file);
+ file->private_data = jtag;
+ return 0;
+}
+
+static int jtag_release(struct inode *inode, struct file *file)
+{
+ struct jtag *jtag = file->private_data;
+
+ mutex_lock(&jtag->open_lock);
+ jtag->opened = false;
+ mutex_unlock(&jtag->open_lock);
+ return 0;
+}
+
+static const struct file_operations jtag_fops = {
+ .owner = THIS_MODULE,
+ .open = jtag_open,
+ .release = jtag_release,
+ .llseek = noop_llseek,
+ .unlocked_ioctl = jtag_ioctl,
+};
+
+struct jtag *jtag_alloc(size_t priv_size, const struct jtag_ops *ops)
+{
+ struct jtag *jtag;
+
+ if (!ops)
+ return NULL;
+
+ if (!ops->idle || !ops->mode_set || !ops->status_get || !ops->xfer)
+ return NULL;
+
+ jtag = kzalloc(sizeof(*jtag) + priv_size, GFP_KERNEL);
+ if (!jtag)
+ return NULL;
+
+ jtag->ops = ops;
+ return jtag;
+}
+EXPORT_SYMBOL_GPL(jtag_alloc);
+
+void jtag_free(struct jtag *jtag)
+{
+ kfree(jtag);
+}
+EXPORT_SYMBOL_GPL(jtag_free);
+
+int jtag_register(struct jtag *jtag)
+{
+ char *name;
+ int err;
+ int id;
+
+ id = ida_simple_get(&jtag_ida, 0, 0, GFP_KERNEL);
+ if (id < 0)
+ return id;
+
+ jtag->id = id;
+ jtag->opened = false;
+
+ name = kzalloc(MAX_JTAG_NAME_LEN, GFP_KERNEL);
+ if (!name) {
+ err = -ENOMEM;
+ goto err_jtag_alloc;
+ }
+
+ err = snprintf(name, MAX_JTAG_NAME_LEN, "jtag%d", id);
+ if (err < 0)
+ goto err_jtag_name;
+
+ mutex_init(&jtag->open_lock);
+ jtag->miscdev.fops = &jtag_fops;
+ jtag->miscdev.minor = MISC_DYNAMIC_MINOR;
+ jtag->miscdev.name = name;
+
+ err = misc_register(&jtag->miscdev);
+ if (err) {
+ dev_err(jtag->dev, "Unable to register device\n");
+ goto err_jtag_name;
+ }
+ return 0;
+
+err_jtag_name:
+ kfree(name);
+err_jtag_alloc:
+ ida_simple_remove(&jtag_ida, id);
+ return err;
+}
+EXPORT_SYMBOL_GPL(jtag_register);
+
+void jtag_unregister(struct jtag *jtag)
+{
+ misc_deregister(&jtag->miscdev);
+ kfree(jtag->miscdev.name);
+ ida_simple_remove(&jtag_ida, jtag->id);
+}
+EXPORT_SYMBOL_GPL(jtag_unregister);
+
+static void __exit jtag_exit(void)
+{
+ ida_destroy(&jtag_ida);
+}
+
+module_exit(jtag_exit);
+
+MODULE_AUTHOR("Oleksandr Shamray <oleksandrs@mellanox.com>");
+MODULE_DESCRIPTION("Generic jtag support");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/jtag.h b/include/linux/jtag.h
new file mode 100644
index 0000000..80a887f
--- /dev/null
+++ b/include/linux/jtag.h
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+// include/linux/jtag.h - JTAG class driver
+//
+// Copyright (c) 2018 Mellanox Technologies. All rights reserved.
+// Copyright (c) 2018 Oleksandr Shamray <oleksandrs@mellanox.com>
+
+#ifndef __JTAG_H
+#define __JTAG_H
+
+#include <uapi/linux/jtag.h>
+
+#define jtag_u64_to_ptr(arg) ((void *)(uintptr_t)arg)
+
+#define JTAG_MAX_XFER_DATA_LEN 65535
+
+struct jtag;
+/**
+ * struct jtag_ops - callbacks for jtag control functions:
+ *
+ * @freq_get: get frequency function. Filled by device driver
+ * @freq_set: set frequency function. Filled by device driver
+ * @status_get: set status function. Filled by device driver
+ * @idle: set JTAG to idle state function. Filled by device driver
+ * @xfer: send JTAG xfer function. Filled by device driver
+ */
+struct jtag_ops {
+ int (*freq_get)(struct jtag *jtag, u32 *freq);
+ int (*freq_set)(struct jtag *jtag, u32 freq);
+ int (*status_get)(struct jtag *jtag, u32 *state);
+ int (*idle)(struct jtag *jtag, struct jtag_run_test_idle *idle);
+ int (*xfer)(struct jtag *jtag, struct jtag_xfer *xfer, u8 *xfer_data);
+ int (*mode_set)(struct jtag *jtag, u32 mode_mask);
+};
+
+void *jtag_priv(struct jtag *jtag);
+int jtag_register(struct jtag *jtag);
+void jtag_unregister(struct jtag *jtag);
+struct jtag *jtag_alloc(size_t priv_size, const struct jtag_ops *ops);
+void jtag_free(struct jtag *jtag);
+
+#endif /* __JTAG_H */
diff --git a/include/uapi/linux/jtag.h b/include/uapi/linux/jtag.h
new file mode 100644
index 0000000..ecd02a0
--- /dev/null
+++ b/include/uapi/linux/jtag.h
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+// include/uapi/linux/jtag.h - JTAG class driver uapi
+//
+// Copyright (c) 2018 Mellanox Technologies. All rights reserved.
+// Copyright (c) 2018 Oleksandr Shamray <oleksandrs@mellanox.com>
+
+#ifndef __UAPI_LINUX_JTAG_H
+#define __UAPI_LINUX_JTAG_H
+
+#include <linux/types.h>
+/*
+ * JTAG_XFER_HW_MODE: JTAG hardware mode. Used to set HW drived or bitbang
+ * mode. This is bitmask param of ioctl JTAG_SIOCMODE command
+ */
+#define JTAG_XFER_HW_MODE 1
+
+/**
+ * enum jtag_endstate:
+ *
+ * @JTAG_STATE_IDLE: JTAG state machine IDLE state
+ * @JTAG_STATE_PAUSEIR: JTAG state machine PAUSE_IR state
+ * @JTAG_STATE_PAUSEDR: JTAG state machine PAUSE_DR state
+ */
+enum jtag_endstate {
+ JTAG_STATE_IDLE,
+ JTAG_STATE_PAUSEIR,
+ JTAG_STATE_PAUSEDR,
+};
+
+/**
+ * enum jtag_xfer_type:
+ *
+ * @JTAG_SIR_XFER: SIR transfer
+ * @JTAG_SDR_XFER: SDR transfer
+ */
+enum jtag_xfer_type {
+ JTAG_SIR_XFER,
+ JTAG_SDR_XFER,
+};
+
+/**
+ * enum jtag_xfer_direction:
+ *
+ * @JTAG_READ_XFER: read transfer
+ * @JTAG_WRITE_XFER: write transfer
+ */
+enum jtag_xfer_direction {
+ JTAG_READ_XFER,
+ JTAG_WRITE_XFER,
+};
+
+/**
+ * struct jtag_run_test_idle - forces JTAG state machine to
+ * RUN_TEST/IDLE state
+ *
+ * @reset: 0 - run IDLE/PAUSE from current state
+ * 1 - go through TEST_LOGIC/RESET state before IDLE/PAUSE
+ * @end: completion flag
+ * @tck: clock counter
+ *
+ * Structure represents interface to JTAG device for jtag idle
+ * execution.
+ */
+struct jtag_run_test_idle {
+ __u8 reset;
+ __u8 endstate;
+ __u8 tck;
+};
+
+/**
+ * struct jtag_xfer - jtag xfer:
+ *
+ * @type: transfer type
+ * @direction: xfer direction
+ * @length: xfer bits len
+ * @tdio : xfer data array
+ * @endir: xfer end state
+ *
+ * Structure represents interface to JTAG device for jtag sdr xfer
+ * execution.
+ */
+struct jtag_xfer {
+ __u8 type;
+ __u8 direction;
+ __u8 endstate;
+ __u8 padding;
+ __u32 length;
+ __u64 tdio;
+};
+
+/* ioctl interface */
+#define __JTAG_IOCTL_MAGIC 0xb2
+
+#define JTAG_IOCRUNTEST _IOW(__JTAG_IOCTL_MAGIC, 0,\
+ struct jtag_run_test_idle)
+#define JTAG_SIOCFREQ _IOW(__JTAG_IOCTL_MAGIC, 1, unsigned int)
+#define JTAG_GIOCFREQ _IOR(__JTAG_IOCTL_MAGIC, 2, unsigned int)
+#define JTAG_IOCXFER _IOWR(__JTAG_IOCTL_MAGIC, 3, struct jtag_xfer)
+#define JTAG_GIOCSTATUS _IOWR(__JTAG_IOCTL_MAGIC, 4, enum jtag_endstate)
+#define JTAG_SIOCMODE _IOW(__JTAG_IOCTL_MAGIC, 5, unsigned int)
+
+#define JTAG_FIRST_MINOR 0
+#define JTAG_MAX_DEVICES 32
+
+#endif /* __UAPI_LINUX_JTAG_H */
--
1.7.1
^ permalink raw reply related
* [patch v21 0/4] JTAG driver introduction
From: Oleksandr Shamray @ 2018-05-15 14:21 UTC (permalink / raw)
To: linux-arm-kernel
When a need raise up to use JTAG interface for system's devices
programming or CPU debugging, usually the user layer
application implements jtag protocol by bit-bang or using a
proprietary connection to vendor hardware.
This method can be slow and not generic.
We propose to implement general JTAG interface and infrastructure
to communicate with user layer application. In such way, we can
have the standard JTAG interface core part and separation from
specific HW implementation.
This allow new capability to debug the CPU or program system's
device via BMC without additional devices nor cost.
This patch purpose is to add JTAG master core infrastructure by
defining new JTAG class and provide generic JTAG interface
to allow hardware specific drivers to connect this interface.
This will enable all JTAG drivers to use the common interface
part and will have separate for hardware implementation.
The JTAG (Joint Test Action Group) core driver provides minimal generic
JTAG interface, which can be used by hardware specific JTAG master
controllers. By providing common interface for the JTAG controllers,
user space device programing is hardware independent.
Modern SoC which in use for embedded system' equipped with
internal JTAG master interface.
This interface is used for programming and debugging system's
hardware components, like CPLD, FPGA, CPU, voltage and
industrial controllers.
Firmware for such devices can be upgraded through JTAG interface during
Runtime. The JTAG standard support for multiple devices programming,
is in case their lines are daisy-chained together.
For example, systems which equipped with host CPU, BMC SoC or/and
number of programmable devices are capable to connect a pin and
select system components dynamically for programming and debugging,
This is using by the BMC which is equipped with internal SoC master
controller.
For example:
BMC JTAG master --> pin selected to CPLDs chain for programming (filed
upgrade, production)
BMC JTAG master --> pin selected to voltage monitors for programming
(field upgrade, production)
BMC JTAG master --> pin selected to host CPU (on-site debugging
and developers debugging)
For example, we can have application in user space which using calls
to JTAG driver executes CPLD programming directly from SVF file
The JTAG standard (IEEE 1149.1) defines the next connector pins:
- TDI (Test Data In);
- TDO (Test Data Out);
- TCK (Test Clock);
- TMS (Test Mode Select);
- TRST (Test Reset) (Optional);
The SoC equipped with JTAG master controller, performs
device programming on command or vector level. For example
a file in a standard SVF (Serial Vector Format) that contains
boundary scan vectors, can be used by sending each vector
to the JTAG interface and the JTAG controller will execute
the programming.
Initial version provides the system calls set for:
- SIR (Scan Instruction Register, IEEE 1149.1 Instruction Register scan);
- SDR (Scan Data Register, IEEE 1149.1 Data Register scan);
- RUNTEST (Forces the IEEE 1149.1 bus to a run state for a specified
number of clocks.
SoC which are not equipped with JTAG master interface, can be built
on top of JTAG core driver infrastructure, by applying bit-banging of
TDI, TDO, TCK and TMS pins within the hardware specific driver.
Oleksandr Shamray (4):
drivers: jtag: Add JTAG core driver
drivers: jtag: Add Aspeed SoC 24xx and 25xx families JTAG master
driver
Documentation: jtag: Add bindings for Aspeed SoC 24xx and 25xx
families JTAG master driver
Documentation: jtag: Add ABI documentation
Documentation/ABI/testing/jtag-dev | 27 +
.../devicetree/bindings/jtag/aspeed-jtag.txt | 22 +
Documentation/ioctl/ioctl-number.txt | 2 +
Documentation/jtag/overview | 28 +
Documentation/jtag/transactions | 109 +++
MAINTAINERS | 10 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/jtag/Kconfig | 32 +
drivers/jtag/Makefile | 2 +
drivers/jtag/jtag-aspeed.c | 786 ++++++++++++++++++++
drivers/jtag/jtag.c | 274 +++++++
include/linux/jtag.h | 41 +
include/uapi/linux/jtag.h | 105 +++
14 files changed, 1441 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/testing/jtag-dev
create mode 100644 Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
create mode 100644 Documentation/jtag/overview
create mode 100644 Documentation/jtag/transactions
create mode 100644 drivers/jtag/Kconfig
create mode 100644 drivers/jtag/Makefile
create mode 100644 drivers/jtag/jtag-aspeed.c
create mode 100644 drivers/jtag/jtag.c
create mode 100644 include/linux/jtag.h
create mode 100644 include/uapi/linux/jtag.h
^ permalink raw reply
* [PATCH v2 16/40] arm64: mm: Pin down ASIDs for sharing mm with devices
From: Catalin Marinas @ 2018-05-15 14:16 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180511190641.23008-17-jean-philippe.brucker@arm.com>
Hi Jean-Philippe,
On Fri, May 11, 2018 at 08:06:17PM +0100, Jean-Philippe Brucker wrote:
> +unsigned long mm_context_get(struct mm_struct *mm)
> +{
> + unsigned long flags;
> + u64 asid;
> +
> + raw_spin_lock_irqsave(&cpu_asid_lock, flags);
> +
> + asid = atomic64_read(&mm->context.id);
> +
> + if (mm->context.pinned) {
> + mm->context.pinned++;
> + asid &= ~ASID_MASK;
> + goto out_unlock;
> + }
> +
> + if (nr_pinned_asids >= max_pinned_asids) {
> + asid = 0;
> + goto out_unlock;
> + }
> +
> + if (!asid_gen_match(asid)) {
> + /*
> + * We went through one or more rollover since that ASID was
> + * used. Ensure that it is still valid, or generate a new one.
> + * The cpu argument isn't used by new_context.
> + */
> + asid = new_context(mm, 0);
> + atomic64_set(&mm->context.id, asid);
> + }
> +
> + asid &= ~ASID_MASK;
> +
> + nr_pinned_asids++;
> + __set_bit(asid2idx(asid), pinned_asid_map);
> + mm->context.pinned++;
> +
> +out_unlock:
> + raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
> +
> + return asid;
> +}
With CONFIG_UNMAP_KERNEL_AT_EL0 (a.k.a. KPTI), the hardware ASID has bit
0 set automatically when entering user space (and cleared when getting
back to the kernel). If the returned asid value here is going to be used
as is in the calling code, you should probably set bit 0 when KPTI is
enabled.
--
Catalin
^ permalink raw reply
* [PATCH 10/12] platform/early: implement support for early platform drivers
From: Bartosz Golaszewski @ 2018-05-15 14:06 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <CAL_JsqJw8UXktcLK8ADUfo1P+1un+omJ31sGcq7GFbNwJMsHKg@mail.gmail.com>
2018-05-14 15:37 GMT+02:00 Rob Herring <robh+dt@kernel.org>:
> On Fri, May 11, 2018 at 11:20 AM, Bartosz Golaszewski <brgl@bgdev.pl> wrote:
>> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>
>> This introduces the core part of support for early platform drivers
>> and devices.
>>
>
> It looks like most of your prep patches are to separate the alloc and
> init of platform devices because you are essentially making early
> devices/drivers a sub-class. Maybe you could avoid doing that and
> simplify things a bit. Comments below based on doing that...
>
My aim was to change as little as possible for everybody else while
fixing our problem. These changes are already controversial enough
without risky reusing of existing fields in common structures. I was
just afraid that there are too many intricacies for it to be safe.
>> +/**
>> + * struct early_platform_driver
>> + *
>> + * @pdrv: real platform driver associated with this early platform driver
>> + * @list: list head for the list of early platform drivers
>> + * @early_probe: early probe callback
>> + */
>> +struct early_platform_driver {
>> + struct platform_driver pdrv;
>> + struct list_head list;
>
> Couldn't you use an existing list in driver_private until you move
> over to the normal bus infra.
>
This is something that the previous implementation did. It was quite
unreadable, so I decided to go with a separate list.
>> + int (*early_probe)(struct platform_device *);
>
> Just add this to platform_driver.
>
This would extend the structure for everybody else while there'll be
very few such devices and not all systems would even require it.
>> +};
>> +
>> +/**
>> + * struct early_platform_device
>> + *
>> + * @pdev: real platform device associated with this early platform device
>> + * @list: list head for the list of early platform devices
>> + * @deferred: true if this device's early probe was deferred
>> + * @deferred_drv: early platform driver with which this device was matched
>> + */
>> +struct early_platform_device {
>> + struct platform_device pdev;
>> + struct list_head list;
>
> Use a list in device_private?
>
>> + bool deferred;
>> + struct early_platform_driver *deferred_drv;
>
> Can't you use the existing deferred probe list?
>
I thought about it, but I was afraid there could be some timing issues
with that and decided against it. The early deferral also doesn't work
in a workque, but is synchronous instead.
Best regards,
Bartosz Golaszewski
^ permalink raw reply
* [PATCH 2/3] x86/mm: add TLB purge to free pmd/pte page interfaces
From: Joerg Roedel @ 2018-05-15 14:05 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180430175925.2657-3-toshi.kani@hpe.com>
On Mon, Apr 30, 2018 at 11:59:24AM -0600, Toshi Kani wrote:
> int pud_free_pmd_page(pud_t *pud, unsigned long addr)
> {
> - pmd_t *pmd;
> + pmd_t *pmd, *pmd_sv;
> + pte_t *pte;
> int i;
>
> if (pud_none(*pud))
> return 1;
>
> pmd = (pmd_t *)pud_page_vaddr(*pud);
> + pmd_sv = (pmd_t *)__get_free_page(GFP_KERNEL);
So you need to allocate a page to free a page? It is better to put the
pages into a list with a list_head on the stack.
I am still on favour of just reverting the broken commit and do a
correct and working fix for the/a merge window.
Joerg
^ permalink raw reply
* [RFC PATCH 00/10] Add persistent clock support
From: Daniel Lezcano @ 2018-05-15 13:56 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526285602.git.baolin.wang@linaro.org>
On Mon, May 14, 2018 at 04:55:26PM +0800, Baolin Wang wrote:
> Hi,
>
> We will meet below issues when compensating the suspend time for the timekeeping.
>
> 1. We have too many different ways of dealing with persistent timekeeping
> across architectures, so it is hard for one driver to compatable with different
> architectures.
>
> 2. On some platforms (such as Spreadtrum platform), we registered the high
> resolution timer as one clocksource to update the OS time, but the high
> resolution timer will be stopped in suspend state. So we use another one
> always-on timer (but low resolution) to calculate the suspend time to
> compensate the OS time. Though we can register the always-on timer as one
> clocksource, we need re-calculate the mult/shift with one larger conversion
> range to calculate the suspend time and need update the clock in case of
> running over the always-on timer.
>
> More duplicate code will be added if other platforms meet this case.
>
> 3. Now we have 3 sources that could be used to compensate the OS time:
> Nonstop clocksource during suspend, persistent clock and rtc device,
> which is complicated. Another hand is that the nonstop clocksource can
> risk wrapping if the suspend time is too long, so we need one mechanism
> to wake up the system before the nonstop clocksource wrapping.
>
> According to above issues, we can introduce one common persistent clock
> framework to compatable with different architectures, in future we will
> remove the persistent clock implementation for each architecture. Also
> this framework will implement common code to help drivers to register easily.
> Moreover if we converted all SUSPEND_NONSTOP clocksource to register to
> be one persistent clock, we can remove the SUSPEND_NONSTOP clocksource
> accounting in timekeeping, which means we can only compensate the OS time
> from persistent clock and RTC.
>
> Will be appreciated for any comments. Thank you all.
Why do we need another API ?
Why not remove the present persistent API and rely on the SUSPEND_NONSTOP flag
to do the right action at suspend and resume?
We register different clocksources, the rating does the selection.
When entering 'suspend', we check against the SUSPEND_NONSTOP flag and switch
to the first clocksource with the best rating and the flag set. When resuming,
we switch back to the highest rating.
Having a clocksource out of the always-on domain must be notified with a trace
in the log because this is not a normal situation.
--
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply
* [PATCH v2 4/4] arm64: defconfig: enable Rockchip Innosilicon hdmiphy
From: Heiko Stuebner @ 2018-05-15 13:54 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20180515135457.6252-1-heiko@sntech.de>
The rk3228 and rk3328 socs use an MMIO-connected hdmi-phy from Innosilicon.
So enable the necessary driver as module.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 74abf140e332..dff3de45cc04 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -604,6 +604,7 @@ CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_MVEBU_CP110_COMPHY=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_EMMC=y
+CONFIG_PHY_ROCKCHIP_INNO_HDMI=m
CONFIG_PHY_ROCKCHIP_PCIE=m
CONFIG_PHY_ROCKCHIP_TYPEC=y
CONFIG_PHY_XGENE=y
--
2.17.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox