* [PATCH 036/102] arm64: dts: renesas: ulcb: Rename EtherAVB "mdc" pin group to "mdio"
From: Simon Horman @ 2018-05-18 11:14 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Geert Uytterhoeven <geert+renesas@glider.be>
On other Renesas SoCs, the pin group for the MDIO bus is named "mdio"
instead of "mdc". Fix the inconsistency, now the pinctrl drivers for
R-Car H3, M3-W, and M3-N have gained support for the traditional pin
group name.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/ulcb.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 6f814845f8b6..93402783d52f 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -255,12 +255,12 @@
avb_pins: avb {
mux {
- groups = "avb_link", "avb_mdc", "avb_mii";
+ groups = "avb_link", "avb_mdio", "avb_mii";
function = "avb";
};
- pins_mdc {
- groups = "avb_mdc";
+ pins_mdio {
+ groups = "avb_mdio";
drive-strength = <24>;
};
--
2.11.0
^ permalink raw reply related
* [PATCH 037/102] arm64: dts: renesas: eagle: add EtherAVB pins
From: Simon Horman @ 2018-05-18 11:14 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Add the (previously omitted) EtherAVB pin data to the Eagle board's
device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index ebfbb51ab168..b800a119753b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -79,6 +79,9 @@
};
&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+
renesas,no-ether-link;
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
@@ -148,6 +151,11 @@
};
&pfc {
+ avb_pins: avb0 {
+ groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
+ function = "avb0";
+ };
+
i2c0_pins: i2c0 {
groups = "i2c0";
function = "i2c0";
--
2.11.0
^ permalink raw reply related
* [PATCH 038/102] arm64: dts: renesas: v3msk: add EtherAVB pins
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Add the (previously omitted) EtherAVB pin data to the V3M Starter Kit
board's device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index a8ceeac77992..55aa01b663e5 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -32,6 +32,9 @@
};
&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+
renesas,no-ether-link;
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
@@ -52,6 +55,11 @@
};
&pfc {
+ avb_pins: avb0 {
+ groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
+ function = "avb0";
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
--
2.11.0
^ permalink raw reply related
* [PATCH 039/102] arm64: dts: renesas: r8a77980: add PFC support
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the generic R8A77980 part of the PFC device node.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 03845fd74996..08c6708eb9dd 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -71,6 +71,11 @@
#size-cells = <2>;
ranges;
+ pfc: pin-controller at e6060000 {
+ compatible = "renesas,pfc-r8a77980";
+ reg = <0 0xe6060000 0 0x50c>;
+ };
+
cpg: clock-controller at e6150000 {
compatible = "renesas,r8a77980-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
--
2.11.0
^ permalink raw reply related
* [PATCH 040/102] arm64: dts: renesas: condor: add SCIF0 pins
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Add the (previously omitted) SCIF0 pin data to the Condor board's
device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 06cf6845765a..38f11cee42dc 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -49,7 +49,22 @@
clock-frequency = <32768>;
};
+&pfc {
+ scif0_pins: scif0 {
+ groups = "scif0_data";
+ function = "scif0";
+ };
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_b";
+ function = "scif_clk";
+ };
+};
+
&scif0 {
+ pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
--
2.11.0
^ permalink raw reply related
* [PATCH 041/102] arm64: dts: renesas: condor: add EtherAVB pins
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Add the (previously omitted) EtherAVB pin data to the Condor board's
device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 38f11cee42dc..7af5afa41795 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -30,6 +30,9 @@
};
&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
renesas,no-ether-link;
@@ -50,6 +53,11 @@
};
&pfc {
+ avb_pins: avb {
+ groups = "avb_mdio", "avb_rgmii";
+ function = "avb";
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
--
2.11.0
^ permalink raw reply related
* [PATCH 042/102] arm64: dts: renesas: r8a77980: add MMC support
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the generic R8A77980 part of the MMC0 (SDHI2) device node.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 08c6708eb9dd..d27b80bcdbb4 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -353,6 +353,18 @@
dma-channels = <16>;
};
+ mmc0: mmc at ee140000 {
+ compatible = "renesas,sdhi-r8a77980",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee140000 0 0x2000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 314>;
+ max-frequency = <200000000>;
+ status = "disabled";
+ };
+
gic: interrupt-controller at f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
--
2.11.0
^ permalink raw reply related
* [PATCH 043/102] arm64: dts: renesas: r8a7795: add HDMI sound support
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 32870cbaf94d..b1c52dae4d49 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -2335,6 +2335,10 @@
port at 1 {
reg = <1>;
};
+ port at 2 {
+ /* HDMI sound */
+ reg = <2>;
+ };
};
};
@@ -2360,6 +2364,10 @@
port at 1 {
reg = <1>;
};
+ port at 2 {
+ /* HDMI sound */
+ reg = <2>;
+ };
};
};
--
2.11.0
^ permalink raw reply related
* [PATCH 044/102] arm64: dts: renesas: r8a7796: add HDMI sound support
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index f33063dd7cd7..f41bc25b3933 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -2009,6 +2009,10 @@
port at 1 {
reg = <1>;
};
+ port at 2 {
+ /* HDMI sound */
+ reg = <2>;
+ };
};
};
--
2.11.0
^ permalink raw reply related
* [PATCH 045/102] arm64: dts: renesas: salvator-common: use audio-graph-card for Sound
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Current Sound is using simple-audio-card which can't support HDMI.
To use HDMI sound, we need to use audio-graph-card.
But, one note is that r8a7795 has 2 HDMI ports, but r8a7796 has 1.
Because of this mismatch, supporting HDMI on salvator-common is
impossible.
Thus, this patch exchange sound card to audio-graph-card and keep
supporting ak4613 as 1st sound node.
r8a7795/r8a7796 salvator-x{s} need to add HDMI sound individually.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/salvator-common.dtsi | 38 ++++++++++++++----------
1 file changed, 22 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 1642bc9c8906..9116f4caa3c6 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -93,20 +93,12 @@
regulator-always-on;
};
- rsnd_ak4613: sound {
- compatible = "simple-audio-card";
+ sound_card: sound {
+ compatible = "audio-graph-card";
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcpu>;
- simple-audio-card,frame-master = <&sndcpu>;
+ label = "rcar-sound";
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&ak4613>;
- };
+ dais = <&rsnd_port0>;
};
vbus0_usb2: regulator-vbus0-usb2 {
@@ -322,6 +314,12 @@
asahi-kasei,out4-single-end;
asahi-kasei,out5-single-end;
asahi-kasei,out6-single-end;
+
+ port {
+ ak4613_endpoint: endpoint {
+ remote-endpoint = <&rsnd_endpoint0>;
+ };
+ };
};
cs2000: clk_multiplier at 4f {
@@ -581,10 +579,18 @@
<&audio_clk_c>,
<&cpg CPG_CORE CPG_AUDIO_CLK_I>;
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &src0 &dvc0>;
- capture = <&ssi1 &src1 &dvc1>;
+ ports {
+ rsnd_port0: port at 0 {
+ rsnd_endpoint0: endpoint {
+ remote-endpoint = <&ak4613_endpoint>;
+
+ dai-format = "left_j";
+ bitclock-master = <&rsnd_endpoint0>;
+ frame-master = <&rsnd_endpoint0>;
+
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
};
};
};
--
2.11.0
^ permalink raw reply related
* [PATCH 046/102] arm64: dts: renesas: r8a7795-es1-salvator-x: enable HDMI sound
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
.../boot/dts/renesas/r8a7795-es1-salvator-x.dts | 46 ++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
index 7f2a3d923f21..3f46345a4644 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
@@ -56,6 +56,12 @@
status = "okay";
};
+&sound_card {
+ dais = <&rsnd_port0 /* ak4613 */
+ &rsnd_port1 /* HDMI0 */
+ &rsnd_port2>; /* HDMI1 */
+};
+
&hdmi0 {
status = "okay";
@@ -66,6 +72,12 @@
remote-endpoint = <&hdmi0_con>;
};
};
+ port at 2 {
+ reg = <2>;
+ dw_hdmi0_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint1>;
+ };
+ };
};
};
@@ -83,6 +95,12 @@
remote-endpoint = <&hdmi1_con>;
};
};
+ port at 2 {
+ reg = <2>;
+ dw_hdmi1_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint2>;
+ };
+ };
};
};
@@ -94,6 +112,34 @@
status = "okay";
};
+&rcar_sound {
+ ports {
+ /* rsnd_port0 is on salvator-common */
+ rsnd_port1: port at 1 {
+ rsnd_endpoint1: endpoint {
+ remote-endpoint = <&dw_hdmi0_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint1>;
+ frame-master = <&rsnd_endpoint1>;
+
+ playback = <&ssi2>;
+ };
+ };
+ rsnd_port2: port at 2 {
+ rsnd_endpoint2: endpoint {
+ remote-endpoint = <&dw_hdmi1_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint2>;
+ frame-master = <&rsnd_endpoint2>;
+
+ playback = <&ssi3>;
+ };
+ };
+ };
+};
+
&pfc {
usb2_pins: usb2 {
groups = "usb2";
--
2.11.0
^ permalink raw reply related
* [PATCH 047/102] arm64: dts: renesas: r8a7795-salvator-xs: enable HDMI sound
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
.../arm64/boot/dts/renesas/r8a7795-salvator-xs.dts | 46 ++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
index 8b50ceb746e8..83676684c6b4 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
@@ -56,6 +56,12 @@
status = "okay";
};
+&sound_card {
+ dais = <&rsnd_port0 /* ak4613 */
+ &rsnd_port1 /* HDMI0 */
+ &rsnd_port2>; /* HDMI1 */
+};
+
&hdmi0 {
status = "okay";
@@ -66,6 +72,12 @@
remote-endpoint = <&hdmi0_con>;
};
};
+ port at 2 {
+ reg = <2>;
+ dw_hdmi0_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint1>;
+ };
+ };
};
};
@@ -83,6 +95,12 @@
remote-endpoint = <&hdmi1_con>;
};
};
+ port at 2 {
+ reg = <2>;
+ dw_hdmi1_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint2>;
+ };
+ };
};
};
@@ -94,6 +112,34 @@
status = "okay";
};
+&rcar_sound {
+ ports {
+ /* rsnd_port0 is on salvator-common */
+ rsnd_port1: port at 1 {
+ rsnd_endpoint1: endpoint {
+ remote-endpoint = <&dw_hdmi0_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint1>;
+ frame-master = <&rsnd_endpoint1>;
+
+ playback = <&ssi2>;
+ };
+ };
+ rsnd_port2: port at 2 {
+ rsnd_endpoint2: endpoint {
+ remote-endpoint = <&dw_hdmi1_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint2>;
+ frame-master = <&rsnd_endpoint2>;
+
+ playback = <&ssi3>;
+ };
+ };
+ };
+};
+
&pfc {
usb2_pins: usb2 {
groups = "usb2";
--
2.11.0
^ permalink raw reply related
* [PATCH 048/102] arm64: dts: renesas: r8a7796-salvator-xs: enable HDMI sound
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
.../arm64/boot/dts/renesas/r8a7796-salvator-xs.dts | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
index 2c37055efa94..ddf35d4cd5e5 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
@@ -40,6 +40,11 @@
"dclkin.0", "dclkin.1", "dclkin.2";
};
+&sound_card {
+ dais = <&rsnd_port0 /* ak4613 */
+ &rsnd_port1>; /* HDMI0 */
+};
+
&hdmi0 {
status = "okay";
@@ -50,9 +55,32 @@
remote-endpoint = <&hdmi0_con>;
};
};
+ port at 2 {
+ reg = <2>;
+ dw_hdmi0_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint1>;
+ };
+ };
};
};
&hdmi0_con {
remote-endpoint = <&rcar_dw_hdmi0_out>;
};
+
+&rcar_sound {
+ ports {
+ /* rsnd_port0 is on salvator-common */
+ rsnd_port1: port at 1 {
+ rsnd_endpoint1: endpoint {
+ remote-endpoint = <&dw_hdmi0_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint1>;
+ frame-master = <&rsnd_endpoint1>;
+
+ playback = <&ssi2>;
+ };
+ };
+ };
+};
--
2.11.0
^ permalink raw reply related
* [PATCH 049/102] arm64: dts: renesas: r8a7795-salvator-x: enable HDMI sound
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 46 ++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index af467419266a..0efbef5ea9b7 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -56,6 +56,12 @@
status = "okay";
};
+&sound_card {
+ dais = <&rsnd_port0 /* ak4613 */
+ &rsnd_port1 /* HDMI0 */
+ &rsnd_port2>; /* HDMI1 */
+};
+
&hdmi0 {
status = "okay";
@@ -66,6 +72,12 @@
remote-endpoint = <&hdmi0_con>;
};
};
+ port at 2 {
+ reg = <2>;
+ dw_hdmi0_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint1>;
+ };
+ };
};
};
@@ -83,6 +95,12 @@
remote-endpoint = <&hdmi1_con>;
};
};
+ port at 2 {
+ reg = <2>;
+ dw_hdmi1_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint2>;
+ };
+ };
};
};
@@ -94,6 +112,34 @@
status = "okay";
};
+&rcar_sound {
+ ports {
+ /* rsnd_port0 is on salvator-common */
+ rsnd_port1: port at 1 {
+ rsnd_endpoint1: endpoint {
+ remote-endpoint = <&dw_hdmi0_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint1>;
+ frame-master = <&rsnd_endpoint1>;
+
+ playback = <&ssi2>;
+ };
+ };
+ rsnd_port2: port at 2 {
+ rsnd_endpoint2: endpoint {
+ remote-endpoint = <&dw_hdmi1_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint2>;
+ frame-master = <&rsnd_endpoint2>;
+
+ playback = <&ssi3>;
+ };
+ };
+ };
+};
+
&pfc {
usb2_pins: usb2 {
groups = "usb2";
--
2.11.0
^ permalink raw reply related
* [PATCH 050/102] arm64: dts: renesas: r8a7796-salvator-x: enable HDMI sound
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index 498c9e807dc4..90cca09b9a5e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -40,6 +40,11 @@
"dclkin.0", "dclkin.1", "dclkin.2";
};
+&sound_card {
+ dais = <&rsnd_port0 /* ak4613 */
+ &rsnd_port1>; /* HDMI0 */
+};
+
&hdmi0 {
status = "okay";
@@ -50,9 +55,32 @@
remote-endpoint = <&hdmi0_con>;
};
};
+ port at 2 {
+ reg = <2>;
+ dw_hdmi0_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint1>;
+ };
+ };
};
};
&hdmi0_con {
remote-endpoint = <&rcar_dw_hdmi0_out>;
};
+
+&rcar_sound {
+ ports {
+ /* rsnd_port0 is on salvator-common */
+ rsnd_port1: port at 1 {
+ rsnd_endpoint1: endpoint {
+ remote-endpoint = <&dw_hdmi0_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint1>;
+ frame-master = <&rsnd_endpoint1>;
+
+ playback = <&ssi2>;
+ };
+ };
+ };
+};
--
2.11.0
^ permalink raw reply related
* [PATCH 051/102] arm64: dts: renesas: r8a7795-es1: Enable IPMMU devices
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled
in DT on the r8a7795 ES1.0 Soc.
This is a follow up for a patch by Magnus Damm for the
the r8a7795 ES2.0 and other R-Car Gen 3 SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
index f9acd125d687..0177f5e60e5a 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
@@ -39,7 +39,6 @@
reg = <0 0xe7730000 0 0x1000>;
renesas,ipmmu-main = <&ipmmu_mm 8>;
#iommu-cells = <1>;
- status = "disabled";
};
/delete-node/ usb-phy at ee0e0200;
--
2.11.0
^ permalink raw reply related
* [PATCH 052/102] arm64: dts: renesas: r8a77990: Revise the psci node
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
The basic support patch 9491a8b17530 ("arm64: dts: renesas: Add Renesas
R8A77990 SoC support") lacks the compatible "arm,psci-1.0" in the psci
node. So, this patch revises it.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a77990.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 3a19b9ebdd6e..19c1f7cea913 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -50,7 +50,7 @@
};
psci {
- compatible = "arm,psci-0.2";
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
};
--
2.11.0
^ permalink raw reply related
* [PATCH 053/102] arm64: dts: renesas: r8a77990: Revise the cache controller node
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
The cache controller node should not have unit-addresses and reg
properties. So, this patch removes them.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a77990.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 19c1f7cea913..46580290b7fb 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -27,9 +27,8 @@
enable-method = "psci";
};
- L2_CA53: cache-controller at 0 {
+ L2_CA53: cache-controller-0 {
compatible = "cache";
- reg = <0>;
power-domains = <&sysc 21>;
cache-unified;
cache-level = <2>;
--
2.11.0
^ permalink raw reply related
* [PATCH 054/102] arm64: dts: renesas: r8a77965: Add FCPF and FCPV instances
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The FCPs handle the interface between various IP cores and memory. Add
the instances related to the FDPs and VSP2s.
Based on a similar patch of the R8A7796 device tree
by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Kieran: Rebase to top of tree]
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a77965.dtsi | 41 +++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index b12f41755aea..74a7ae4ebccc 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/clock/renesas-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77965-sysc.h>
#define CPG_AUDIO_CLK_I 10
@@ -1000,6 +1001,46 @@
/* placeholder */
};
+ fcpf0: fcp at fe950000 {
+ compatible = "renesas,fcpf";
+ reg = <0 0xfe950000 0 0x200>;
+ clocks = <&cpg CPG_MOD 615>;
+ power-domains = <&sysc R8A77965_PD_A3VP>;
+ resets = <&cpg 615>;
+ };
+
+ fcpvb0: fcp at fe96f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe96f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 607>;
+ power-domains = <&sysc R8A77965_PD_A3VP>;
+ resets = <&cpg 607>;
+ };
+
+ fcpvi0: fcp at fe9af000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9af000 0 0x200>;
+ clocks = <&cpg CPG_MOD 611>;
+ power-domains = <&sysc R8A77965_PD_A3VP>;
+ resets = <&cpg 611>;
+ };
+
+ fcpvd0: fcp at fea27000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea27000 0 0x200>;
+ clocks = <&cpg CPG_MOD 603>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 603>;
+ };
+
+ fcpvd1: fcp at fea2f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea2f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 602>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 602>;
+ };
+
csi20: csi2 at fea80000 {
reg = <0 0xfea80000 0 0x10000>;
/* placeholder */
--
2.11.0
^ permalink raw reply related
* [PATCH 055/102] arm64: dts: renesas: r8a77965: Add VSP instances
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The r8a77965 has 4 VSP instances.
Based on a similar patch of the R8A7796 device tree
by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Kieran: Rebased to top of tree, fixed sort orders]
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a77965.dtsi | 44 +++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 74a7ae4ebccc..362eddc6b3d1 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -1009,6 +1009,17 @@
resets = <&cpg 615>;
};
+ vspb: vsp at fe960000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe960000 0 0x8000>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 626>;
+ power-domains = <&sysc R8A77965_PD_A3VP>;
+ resets = <&cpg 626>;
+
+ renesas,fcp = <&fcpvb0>;
+ };
+
fcpvb0: fcp at fe96f000 {
compatible = "renesas,fcpv";
reg = <0 0xfe96f000 0 0x200>;
@@ -1017,6 +1028,17 @@
resets = <&cpg 607>;
};
+ vspi0: vsp at fe9a0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9a0000 0 0x8000>;
+ interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 631>;
+ power-domains = <&sysc R8A77965_PD_A3VP>;
+ resets = <&cpg 631>;
+
+ renesas,fcp = <&fcpvi0>;
+ };
+
fcpvi0: fcp at fe9af000 {
compatible = "renesas,fcpv";
reg = <0 0xfe9af000 0 0x200>;
@@ -1025,6 +1047,17 @@
resets = <&cpg 611>;
};
+ vspd0: vsp at fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x8000>;
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
+
+ renesas,fcp = <&fcpvd0>;
+ };
+
fcpvd0: fcp at fea27000 {
compatible = "renesas,fcpv";
reg = <0 0xfea27000 0 0x200>;
@@ -1033,6 +1066,17 @@
resets = <&cpg 603>;
};
+ vspd1: vsp at fea28000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea28000 0 0x8000>;
+ interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 622>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 622>;
+
+ renesas,fcp = <&fcpvd1>;
+ };
+
fcpvd1: fcp at fea2f000 {
compatible = "renesas,fcpv";
reg = <0 0xfea2f000 0 0x200>;
--
2.11.0
^ permalink raw reply related
* [PATCH 056/102] arm64: dts: renesas: r8a77965: Populate the DU instance placeholder
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The DU entity node has been previously added but only as a placeholder.
Populate the node with the properties to use the device.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a77965.dtsi | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 362eddc6b3d1..a35ea2f32da2 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -1106,9 +1106,19 @@
};
du: display at feb00000 {
- reg = <0 0xfeb00000 0 0x80000>,
- <0 0xfeb90000 0 0x14>;
- /* placeholder */
+ compatible = "renesas,du-r8a77965";
+ reg = <0 0xfeb00000 0 0x80000>;
+ reg-names = "du";
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 721>;
+ clock-names = "du.0", "du.1", "du.3";
+ status = "disabled";
+
+ vsps = <&vspd0 0 &vspd1 0 &vspd0 1>;
ports {
#address-cells = <1>;
--
2.11.0
^ permalink raw reply related
* [PATCH 057/102] arm64: dts: renesas: r8a77965: Add HDMI encoder instance
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Add the HDMI encoder to the R8A77965 DT in disabled state.
Based on a similar patch of the R8A7796 device tree
by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Kieran: Rebase to top of tree]
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a77965.dtsi | 30 +++++++++++++++++++++++++++++-
1 file changed, 29 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index a35ea2f32da2..b46af2744135 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -8,7 +8,7 @@
* Copyright (C) 2016 Renesas Electronics Corp.
*/
-#include <dt-bindings/clock/renesas-cpg-mssr.h>
+#include <dt-bindings/clock/r8a77965-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a77965-sysc.h>
@@ -1105,6 +1105,33 @@
};
};
+ hdmi0: hdmi at fead0000 {
+ compatible = "renesas,r8a77965-hdmi",
+ "renesas,rcar-gen3-hdmi";
+ reg = <0 0xfead0000 0 0x10000>;
+ interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 729>,
+ <&cpg CPG_CORE R8A77965_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 729>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port at 0 {
+ reg = <0>;
+ dw_hdmi0_in: endpoint {
+ remote-endpoint = <&du_out_hdmi0>;
+ };
+ };
+ port at 1 {
+ reg = <1>;
+ };
+ };
+ };
+
du: display at feb00000 {
compatible = "renesas,du-r8a77965";
reg = <0 0xfeb00000 0 0x80000>;
@@ -1132,6 +1159,7 @@
port at 1 {
reg = <1>;
du_out_hdmi0: endpoint {
+ remote-endpoint = <&dw_hdmi0_in>;
};
};
port at 2 {
--
2.11.0
^ permalink raw reply related
* [PATCH 058/102] arm64: dts: renesas: r8a77965-salvator-x: Enable DU external clocks and HDMI
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The DU1 external dot clock is provided by the fixed frequency clock
generator X21, while the DU0 and DU3 clocks are provided by the
programmable Versaclock5 clock generator.
Enable the clocks, and the HDMI encoder for the M3-N Salvator-X board
and hook it up to the HDMI connector.
Based on patches from Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
.../arm64/boot/dts/renesas/r8a77965-salvator-x.dts | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
index 75d890d91df9..340a3c72b65a 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
@@ -19,3 +19,31 @@
reg = <0x0 0x48000000 0x0 0x78000000>;
};
};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 721>,
+ <&versaclock5 1>,
+ <&x21_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.3",
+ "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port at 1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ };
+};
+
+&hdmi0_con {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
--
2.11.0
^ permalink raw reply related
* [PATCH 059/102] arm64: dts: renesas: r8a77965-salvator-xs: Enable DU external clocks and HDMI
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The DU1 external dot clock is provided by the fixed frequency clock
generator X21, while the DU0 and DU3 clocks are provided by the
programmable Versaclock6 clock generator.
Enable the clocks, and the HDMI encoder for the M3-N Salvator-XS, and
hook it up to the HDMI connector
Based on patches from Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
.../boot/dts/renesas/r8a77965-salvator-xs.dts | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
index a83a00deed9e..9de4e3db1621 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
@@ -19,3 +19,31 @@
reg = <0x0 0x48000000 0x0 0x78000000>;
};
};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 721>,
+ <&versaclock6 1>,
+ <&x21_clk>,
+ <&versaclock6 2>;
+ clock-names = "du.0", "du.1", "du.3",
+ "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port at 1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ };
+};
+
+&hdmi0_con {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+};
--
2.11.0
^ permalink raw reply related
* [PATCH 060/102] arm64: dts: renesas: condor: add eMMC support
From: Simon Horman @ 2018-05-18 11:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <cover.1526637994.git.horms+renesas@verge.net.au>
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the Condor board dependent part of the MMC0 (connected to eMMC chip)
device node along with the necessary voltage regulators...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 43 +++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 7af5afa41795..b8df7604dece 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -27,6 +27,24 @@
/* first 128MB is reserved for secure area. */
reg = <0 0x48000000 0 0x78000000>;
};
+
+ d3_3v: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "D3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddq_vin01: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDQ_VIN01";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&avb {
@@ -52,12 +70,37 @@
clock-frequency = <32768>;
};
+&mmc0 {
+ pinctrl-0 = <&mmc_pins>;
+ pinctrl-1 = <&mmc_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&d3_3v>;
+ vqmmc-supply = <&vddq_vin01>;
+ mmc-hs200-1_8v;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
&pfc {
avb_pins: avb {
groups = "avb_mdio", "avb_rgmii";
function = "avb";
};
+ mmc_pins: mmc {
+ groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+ function = "mmc";
+ power-source = <3300>;
+ };
+
+ mmc_pins_uhs: mmc_uhs {
+ groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
--
2.11.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox