* [PATCH v4 2/9] dt-bindings: input: mtk-pmic-keys: Add MT6392 PMIC keys
From: Luca Leonardo Scorcia @ 2026-03-30 8:29 UTC (permalink / raw)
To: linux-mediatek
Cc: Fabien Parent, Val Packett, Luca Leonardo Scorcia,
AngeloGioacchino Del Regno, Dmitry Torokhov, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sen Chu, Sean Wang,
Macpaul Lin, Lee Jones, Matthias Brugger, Linus Walleij,
Liam Girdwood, Mark Brown, Louis-Alexis Eyraud, Julien Massot,
Gary Bisson, Chen Zhong, linux-input, devicetree, linux-kernel,
linux-pm, linux-arm-kernel, linux-gpio
In-Reply-To: <20260330083429.359819-1-l.scorcia@gmail.com>
From: Fabien Parent <parent.f@gmail.com>
Add the binding documentation of mtk-pmic-keys for the MT6392 PMIC.
Signed-off-by: Fabien Parent <parent.f@gmail.com>
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
---
Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
index b95435bd6a9b..2d3c4161a7f8 100644
--- a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
+++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
@@ -30,6 +30,7 @@ properties:
- mediatek,mt6357-keys
- mediatek,mt6358-keys
- mediatek,mt6359-keys
+ - mediatek,mt6392-keys
- mediatek,mt6397-keys
power-off-time-sec: true
--
2.43.0
^ permalink raw reply related
* [PATCH v4 1/9] dt-bindings: mfd: mt6397: Add MT6392 PMIC
From: Luca Leonardo Scorcia @ 2026-03-30 8:29 UTC (permalink / raw)
To: linux-mediatek
Cc: Fabien Parent, Val Packett, Luca Leonardo Scorcia,
Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Sen Chu, Sean Wang, Macpaul Lin, Lee Jones, Matthias Brugger,
AngeloGioacchino Del Regno, Linus Walleij, Liam Girdwood,
Mark Brown, Louis-Alexis Eyraud, Gary Bisson, Julien Massot,
Chen Zhong, linux-input, devicetree, linux-kernel, linux-pm,
linux-arm-kernel, linux-gpio
In-Reply-To: <20260330083429.359819-1-l.scorcia@gmail.com>
From: Fabien Parent <parent.f@gmail.com>
Add the currently supported bindings for the MT6392 PMIC. Remove the
required constraint for the regulators node compatible property to fix a
dtbs_check error.
Signed-off-by: Fabien Parent <parent.f@gmail.com>
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
.../devicetree/bindings/mfd/mediatek,mt6397.yaml | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml
index 05c121b0cb3d..bfad018cfbf3 100644
--- a/Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml
@@ -40,6 +40,10 @@ properties:
- mediatek,mt6358
- mediatek,mt6359
- mediatek,mt6397
+ - items:
+ - enum:
+ - mediatek,mt6392
+ - const: mediatek,mt6323
- items:
- enum:
- mediatek,mt6366
@@ -68,6 +72,10 @@ properties:
- mediatek,mt6331-rtc
- mediatek,mt6358-rtc
- mediatek,mt6397-rtc
+ - items:
+ - enum:
+ - mediatek,mt6392-rtc
+ - const: mediatek,mt6323-rtc
- items:
- enum:
- mediatek,mt6366-rtc
@@ -99,9 +107,6 @@ properties:
- mediatek,mt6366-regulator
- const: mediatek,mt6358-regulator
- required:
- - compatible
-
adc:
type: object
$ref: /schemas/iio/adc/mediatek,mt6359-auxadc.yaml#
--
2.43.0
^ permalink raw reply related
* [PATCH v4 0/9] Add support for mt6392 PMIC
From: Luca Leonardo Scorcia @ 2026-03-30 8:29 UTC (permalink / raw)
To: linux-mediatek
Cc: Luca Leonardo Scorcia, Dmitry Torokhov, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sen Chu, Sean Wang,
Macpaul Lin, Lee Jones, Matthias Brugger,
AngeloGioacchino Del Regno, Linus Walleij, Liam Girdwood,
Mark Brown, Gary Bisson, Val Packett, Julien Massot,
Louis-Alexis Eyraud, Fabien Parent, Chen Zhong, linux-input,
devicetree, linux-kernel, linux-pm, linux-arm-kernel, linux-gpio
The MediaTek mt6392 PMIC is usually found on devices powered by
the mt8516/mt8167 SoC and is yet another mt6323/mt6397 variant.
This series is mostly based around patches submitted a couple
years ago by Fabien Parent and not merged and from Val Packett's
submission from Jan 2025 that included extra cleanups, fixes, and a
new dtsi file similar to ones that exist for other PMICs. Some
comments weren't addressed and the series was ultimately not merged.
This series only enables four functions: regulators, keys, pinctrl
and RTC.
I added a handful of device tree improvements to fix some dtbs_check
errors, added support for the pinctrl device and addressed the comments
from last year's reviews.
The series has been tested on Xiaomi Mi Smart Clock x04g. In order for
pinctrl to probe successfully patch [1] has to be merged too, but
each patch set is independent from the other.
Changes in v4:
- Dropped usage of the regulator compatible
- Fixed commit messages text to properly reference the target subsystem
- Added supply rails to the regulator
- Reworked the regulator schema and PMIC dtsi. Now all supplies are
documented and the schema no longer includes voltage information
- Removed redundant ldo- / buck- prefixes
- Renamed the pinfunc header to mediatek,mt6392-pinfunc.h
- Modified the MFD driver to use a simple identifier in the of_match
data properties
Changes in v3 [2]:
- Added pinctrl device
- Changed mt6397-rtc fallback to mt6323-rtc
- Added schema for regulators
- Fixed checkpatch issues
Changes in v2 [3]:
- Replaced explicit compatibles with fallbacks
[1] https://lore.kernel.org/linux-mediatek/20260317110249.391552-1-l.scorcia@gmail.com/
[2] https://lore.kernel.org/linux-mediatek/20260317184507.523060-1-l.scorcia@gmail.com/
[3] https://lore.kernel.org/linux-mediatek/20260306120521.163654-1-l.scorcia@gmail.com/
Fabien Parent (4):
dt-bindings: mfd: mt6397: Add MT6392 PMIC
dt-bindings: input: mtk-pmic-keys: Add MT6392 PMIC keys
mfd: mt6397: Add support for MT6392 PMIC
regulator: Add MediaTek MT6392 regulator
Luca Leonardo Scorcia (3):
regulator: dt-bindings: Add MediaTek MT6392 PMIC
dt-bindings: pinctrl: mediatek,mt65xx: Add MT6392 pinctrl
pinctrl: mediatek: mt6397: Add MediaTek MT6392
Val Packett (2):
input: keyboard: mtk-pmic-keys: Add MT6392 support
arm64: dts: mediatek: Add MediaTek MT6392 PMIC dtsi
.../bindings/input/mediatek,pmic-keys.yaml | 1 +
.../bindings/mfd/mediatek,mt6397.yaml | 11 +-
.../pinctrl/mediatek,mt65xx-pinctrl.yaml | 1 +
.../regulator/mediatek,mt6392-regulator.yaml | 74 +++
arch/arm64/boot/dts/mediatek/mt6392.dtsi | 73 +++
drivers/input/keyboard/mtk-pmic-keys.c | 17 +
drivers/mfd/mt6397-core.c | 118 +++-
drivers/mfd/mt6397-irq.c | 8 +
drivers/pinctrl/mediatek/pinctrl-mt6397.c | 37 +-
drivers/pinctrl/mediatek/pinctrl-mtk-mt6392.h | 64 +++
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/mt6392-regulator.c | 509 ++++++++++++++++++
.../pinctrl/mediatek,mt6392-pinfunc.h | 39 ++
.../regulator/mediatek,mt6392-regulator.h | 24 +
include/linux/mfd/mt6392/core.h | 42 ++
include/linux/mfd/mt6392/registers.h | 487 +++++++++++++++++
include/linux/mfd/mt6397/core.h | 1 +
include/linux/regulator/mt6392-regulator.h | 42 ++
19 files changed, 1527 insertions(+), 31 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/mediatek,mt6392-regulator.yaml
create mode 100644 arch/arm64/boot/dts/mediatek/mt6392.dtsi
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt6392.h
create mode 100644 drivers/regulator/mt6392-regulator.c
create mode 100644 include/dt-bindings/pinctrl/mediatek,mt6392-pinfunc.h
create mode 100644 include/dt-bindings/regulator/mediatek,mt6392-regulator.h
create mode 100644 include/linux/mfd/mt6392/core.h
create mode 100644 include/linux/mfd/mt6392/registers.h
create mode 100644 include/linux/regulator/mt6392-regulator.h
--
2.43.0
^ permalink raw reply
* Re: [PATCH] arm64: dts: rockchip: Add RK3562 serial aliases
From: Heiko Stuebner @ 2026-03-30 8:27 UTC (permalink / raw)
To: 谢致邦 (XIE Zhibang), linux-rockchip,
Krzysztof Kozlowski
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Kever Yang,
Finley Xiao, devicetree, linux-arm-kernel, linux-kernel
In-Reply-To: <9b3ee9e9-d44d-49b1-81ac-9c3806dc0efb@kernel.org>
Am Samstag, 28. März 2026, 16:08:57 Mitteleuropäische Sommerzeit schrieb Krzysztof Kozlowski:
> On 28/03/2026 14:05, 谢致邦 (XIE Zhibang) wrote:
> > This fixes the stdout-path in rk3562-evb2-v10.dts.
> >
> > Fixes: ceb6ef1ea900 ("arm64: dts: rockchip: Add RK3562 evb2 devicetree")
> > Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
> > ---
> > arch/arm64/boot/dts/rockchip/rk3562.dtsi | 10 ++++++++++
> > 1 file changed, 10 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3562.dtsi b/arch/arm64/boot/dts/rockchip/rk3562.dtsi
> > index e4816aa3dae0..14e74e8ac7df 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3562.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk3562.dtsi
> > @@ -26,6 +26,16 @@ aliases {
> > gpio2 = &gpio2;
> > gpio3 = &gpio3;
> > gpio4 = &gpio4;
> > + serial0 = &uart0;
> > + serial1 = &uart1;
> > + serial2 = &uart2;
> > + serial3 = &uart3;
> > + serial4 = &uart4;
> > + serial5 = &uart5;
> > + serial6 = &uart6;
> > + serial7 = &uart7;
> > + serial8 = &uart8;
> > + serial9 = &uart9;
>
> UART aliases are properties of the boards, not SoC.
We had this argument a lot of times for those numbered aliases
where everything on all soc documentation, schematics and also
user documentation for individual boards, generally references
exactly those numbers :-)
But fiiiiiine, if it comes up all the time ...
I really hope, you're okay with intermitend ordering though:
serial0 = &uart0;
serial2 = &uart2;
serial5 = &uart5;
because otherwise, this would cause pure chaos everywhere.
Because as I said this serial number is used on board-schematics,
board-user-level documentation, SoC documentation, even silcscreen
on boards ... so everywhere.
Similar for all the numbered busses ofthe SoCs.
Heiko
^ permalink raw reply
* [GIT PULL] CIX dts changes for v7.1-rc1
From: Peter Chen @ 2026-03-30 8:23 UTC (permalink / raw)
To: soc, arm; +Cc: fugang.duan, linux-arm-kernel, cix-kernel-upstream
The following changes since commit 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f:
Linux 7.0-rc1 (2026-02-22 13:18:59 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix.git/ tags/cix-dt-v7.1-rc1
for you to fetch changes up to 64b00da69ef6e2cb113868c3ecdccd9bbc1fc91d:
arm64: dts: cix: add FCH(S0)/S5 GPIO controllers for sky1 (2026-03-24 15:37:13 +0800)
----------------------------------------------------------------
- Add power domain and reset for SoC
- Add GPIO for both SoC and Radxa Orion O6 board
----------------------------------------------------------------
Gary Yang (2):
arm64: dts: cix: add support for cix sky1 resets
arm64: dts: cix: Add scmi powerdomain nodes for sky1
Zichar Zhang (1):
arm64: dts: cix: add FCH(S0)/S5 GPIO controllers for sky1
arch/arm64/boot/dts/cix/sky1-orion-o6.dts | 28 ++++++
arch/arm64/boot/dts/cix/sky1-power.h | 33 +++++++
arch/arm64/boot/dts/cix/sky1.dtsi | 152 ++++++++++++++++++++++++++++++
3 files changed, 213 insertions(+)
create mode 100644 arch/arm64/boot/dts/cix/sky1-power.h
--
Best regards,
Peter
^ permalink raw reply
* [PATCH v28 3/4] i2c: ast2600: Add controller driver for AST2600 new register set
From: Ryan Chen @ 2026-03-30 8:21 UTC (permalink / raw)
To: jk, andriy.shevchenko, Andi Shyti, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery,
Benjamin Herrenschmidt, Rayn Chen, Philipp Zabel
Cc: linux-i2c, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, openbmc, Ryan Chen
In-Reply-To: <20260330-upstream_i2c-v28-0-17bdae39c5cb@aspeedtech.com>
The AST2600 introduces a new I2C controller register layout, selectable
at runtime via global control registers. Compared to the legacy layout
used on AST2400/AST2500, the new layout separates controller (master)
and target (slave) registers and adds support for packet-based transfers
The new register set extends the hardware capabilities with:
- Enhanced clock divider configuration for improved timing precision
- tCKHighMin timing control for SCL high pulse width
- Dual pool buffer mode (separate Tx/Rx buffers)
- Extended DMA support with larger buffer size and alignment handling
- Dedicated DMA buffers for controller and target directions
- Hardware-assisted bus recovery and timeout mechanisms
This patch adds an AST2600-specific I2C controller driver implementing
the new register layout, including support for packet-based transfers
and byte, buffer and DMA transfer modes.
The legacy and new register layouts represent the same AST2600 I2C
controller IP and therefore share the existing compatible string:
"aspeed,ast2600-i2c-bus"
To preserve DT ABI compatibility, driver selection is performed at probe
time based on DT contents. In particular, the new binding requires the
`aspeed,global-regs` phandle, which is absent from legacy DTBs:
- The new driver only probes successfully when `aspeed,global-regs` is
present.
- The existing i2c-aspeed driver returns -ENODEV for AST2600 nodes that
provide `aspeed,global-regs`, allowing the new driver to bind.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
Changes in v28:
- Separate xfer_mode_store into distinct parse and availability-check
steps by introducing ast2600_i2c_xfer_mode_check()
- fix tx dma memcpy source point address.
- Use a temporary variable for devm_platform_get_and_ioremap_resource()
to avoid storing an ERR_PTR in i2c_bus->buf_base; drop the redundant
NULL assignment in the error path since i2c_bus is kzalloc()ed
- Add ABI documentation file
Documentation/ABI/testing/sysfs-driver-ast2600-i2c
Changes in v27:
- remove aspeed,transfer-mode selection instead aspeed,dma-mode.
- add sysfs for xfer mode.
Changes in v25:
- Rename AST2600_I2CM_SMBUS_ALT to AST2600_I2CM_SMBUS_ALERT.
- Refactor transfer mode handling using setup_tx/setup_rx helpers.
- Rework DMA handling to use pre-allocated buffers and reduce
mapping overhead in interrupt context.
- Fix IRQ status checks to use consistent (sts & value) style.
- Move device_property_read_bool() to probe().
- Improve probe error handling.
- Handle timeout condition in target_byte_irq().
- Rename "package" to "packet".
- Remove target reset when master wait_for_completion_timeout().
---
Documentation/ABI/testing/sysfs-driver-ast2600-i2c | 19 +
drivers/i2c/busses/Makefile | 2 +-
drivers/i2c/busses/i2c-aspeed.c | 5 +
drivers/i2c/busses/i2c-ast2600.c | 1080 ++++++++++++++++++++
4 files changed, 1105 insertions(+), 1 deletion(-)
diff --git a/Documentation/ABI/testing/sysfs-driver-ast2600-i2c b/Documentation/ABI/testing/sysfs-driver-ast2600-i2c
new file mode 100644
index 000000000000..7d2a69a7281a
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-ast2600-i2c
@@ -0,0 +1,19 @@
+What: /sys/bus/platform/drivers/i2c-ast2600/.../xfer_mode
+Date: March 2026
+KernelVersion: 7.x
+Contact: Ryan Chen <ryan_chen@aspeedtech.com>
+Description: Shows or sets the active transfer mode for an ASPEED AST2600
+ I2C controller instance.
+
+ Possible values:
+
+ ========= =================================================
+ byte Programmed I/O, one byte at a time.
+ buffer Programmed I/O using the hardware FIFO buffer.
+ Only available if the controller has a buffer
+ resource defined in the device tree.
+ dma DMA transfer (if DMA is available for this
+ controller).
+ ========= =================================================
+
+ Writing an unsupported or unavailable mode returns -EINVAL.
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 547123ab351f..ece201a67d41 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -37,7 +37,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
obj-$(CONFIG_I2C_ALTERA) += i2c-altera.o
obj-$(CONFIG_I2C_AMD_MP2) += i2c-amd-mp2-pci.o i2c-amd-mp2-plat.o
obj-$(CONFIG_I2C_AMD_ASF) += i2c-amd-asf-plat.o
-obj-$(CONFIG_I2C_ASPEED) += i2c-aspeed.o
+obj-$(CONFIG_I2C_ASPEED) += i2c-aspeed.o i2c-ast2600.o
obj-$(CONFIG_I2C_AT91) += i2c-at91.o
i2c-at91-y := i2c-at91-core.o i2c-at91-master.o
i2c-at91-$(CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL) += i2c-at91-slave.o
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index a26b74c71206..8286fd2cd130 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -22,6 +22,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/reset.h>
#include <linux/slab.h>
@@ -1002,6 +1003,10 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
struct clk *parent_clk;
int irq, ret;
+ if (device_is_compatible(&pdev->dev, "aspeed,ast2600-i2c-bus") &&
+ device_property_present(&pdev->dev, "aspeed,global-regs"))
+ return -ENODEV;
+
bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
if (!bus)
return -ENOMEM;
diff --git a/drivers/i2c/busses/i2c-ast2600.c b/drivers/i2c/busses/i2c-ast2600.c
new file mode 100644
index 000000000000..c2368ba309a7
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ast2600.c
@@ -0,0 +1,1080 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ASPEED AST2600 new register set I2C controller driver
+ *
+ * Copyright (C) 2026 ASPEED Technology Inc.
+ */
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/minmax.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/string_helpers.h>
+#include <linux/unaligned.h>
+
+#define AST2600_I2CG_ISR 0x00
+#define AST2600_I2CG_SLAVE_ISR 0x04
+#define AST2600_I2CG_OWNER 0x08
+#define AST2600_I2CG_CTRL 0x0C
+#define AST2600_I2CG_CLK_DIV_CTRL 0x10
+
+#define AST2600_I2CG_SLAVE_PKT_NAK BIT(4)
+#define AST2600_I2CG_M_S_SEPARATE_INTR BIT(3)
+#define AST2600_I2CG_CTRL_NEW_REG BIT(2)
+#define AST2600_I2CG_CTRL_NEW_CLK_DIV BIT(1)
+#define AST2600_GLOBAL_INIT \
+ (AST2600_I2CG_CTRL_NEW_REG | AST2600_I2CG_CTRL_NEW_CLK_DIV)
+/*
+ * APB clk : 100Mhz
+ * div : scl : baseclk [APB/((div/2) + 1)] : tBuf [1/bclk * 16]
+ * I2CG10[31:24] base clk4 for i2c auto recovery timeout counter (0xC6)
+ * I2CG10[23:16] base clk3 for Standard-mode (100Khz) min tBuf 4.7us
+ * 0x3c : 100.8Khz : 3.225Mhz : 4.96us
+ * 0x3d : 99.2Khz : 3.174Mhz : 5.04us
+ * 0x3e : 97.65Khz : 3.125Mhz : 5.12us
+ * 0x40 : 97.75Khz : 3.03Mhz : 5.28us
+ * 0x41 : 99.5Khz : 2.98Mhz : 5.36us (default)
+ * I2CG10[15:8] base clk2 for Fast-mode (400Khz) min tBuf 1.3us
+ * 0x12 : 400Khz : 10Mhz : 1.6us
+ * I2CG10[7:0] base clk1 for Fast-mode Plus (1Mhz) min tBuf 0.5us
+ * 0x08 : 1Mhz : 20Mhz : 0.8us
+ */
+#define I2CCG_DIV_CTRL 0xC6411208
+
+/* 0x00 : I2CC Controller/Target Function Control Register */
+#define AST2600_I2CC_FUN_CTRL 0x00
+#define AST2600_I2CC_SLAVE_ADDR_RX_EN BIT(20)
+#define AST2600_I2CC_MASTER_RETRY_MASK GENMASK(19, 18)
+#define AST2600_I2CC_MASTER_RETRY(x) (((x) & GENMASK(1, 0)) << 18)
+#define AST2600_I2CC_BUS_AUTO_RELEASE BIT(17)
+#define AST2600_I2CC_M_SDA_LOCK_EN BIT(16)
+#define AST2600_I2CC_MULTI_MASTER_DIS BIT(15)
+#define AST2600_I2CC_M_SCL_DRIVE_EN BIT(14)
+#define AST2600_I2CC_MSB_STS BIT(9)
+#define AST2600_I2CC_SDA_DRIVE_1T_EN BIT(8)
+#define AST2600_I2CC_M_SDA_DRIVE_1T_EN BIT(7)
+#define AST2600_I2CC_M_HIGH_SPEED_EN BIT(6)
+/* reserver 5 : 2 */
+#define AST2600_I2CC_SLAVE_EN BIT(1)
+#define AST2600_I2CC_MASTER_EN BIT(0)
+
+/* 0x04 : I2CC Controller/Target Clock and AC Timing Control Register #1 */
+#define AST2600_I2CC_AC_TIMING 0x04
+#define AST2600_I2CC_TTIMEOUT(x) (((x) & GENMASK(4, 0)) << 24)
+#define AST2600_I2CC_TCKHIGHMIN(x) (((x) & GENMASK(3, 0)) << 20)
+#define AST2600_I2CC_TCKHIGH(x) (((x) & GENMASK(3, 0)) << 16)
+#define AST2600_I2CC_TCKLOW(x) (((x) & GENMASK(3, 0)) << 12)
+#define AST2600_I2CC_THDDAT(x) (((x) & GENMASK(1, 0)) << 10)
+#define AST2600_I2CC_TOUTBASECLK(x) (((x) & GENMASK(1, 0)) << 8)
+#define AST2600_I2CC_TBASECLK(x) ((x) & GENMASK(3, 0))
+#define AST2600_I2CC_AC_TIMING_MASK GENMASK(23, 0)
+
+/* 0x08 : I2CC Controller/Target Transmit/Receive Byte Buffer Register */
+#define AST2600_I2CC_STS_AND_BUFF 0x08
+#define AST2600_I2CC_TX_DIR_MASK GENMASK(31, 29)
+#define AST2600_I2CC_SDA_OE BIT(28)
+#define AST2600_I2CC_SDA_O BIT(27)
+#define AST2600_I2CC_SCL_OE BIT(26)
+#define AST2600_I2CC_SCL_O BIT(25)
+
+#define AST2600_I2CC_SCL_LINE_STS BIT(18)
+#define AST2600_I2CC_SDA_LINE_STS BIT(17)
+#define AST2600_I2CC_BUS_BUSY_STS BIT(16)
+
+#define AST2600_I2CC_GET_RX_BUFF(x) (((x) >> 8) & GENMASK(7, 0))
+
+/* 0x0C : I2CC Controller/Target Pool Buffer Control Register */
+#define AST2600_I2CC_BUFF_CTRL 0x0C
+#define AST2600_I2CC_GET_RX_BUF_LEN(x) (((x) & GENMASK(29, 24)) >> 24)
+#define AST2600_I2CC_SET_RX_BUF_LEN(x) (((((x) - 1) & GENMASK(4, 0)) << 16) | BIT(0))
+#define AST2600_I2CC_SET_TX_BUF_LEN(x) (((((x) - 1) & GENMASK(4, 0)) << 8) | BIT(0))
+#define AST2600_I2CC_GET_TX_BUF_LEN(x) ((((x) & GENMASK(12, 8)) >> 8) + 1)
+
+/* 0x10 : I2CM Controller Interrupt Control Register */
+#define AST2600_I2CM_IER 0x10
+/* 0x14 : I2CM Controller Interrupt Status Register : WC */
+#define AST2600_I2CM_ISR 0x14
+
+#define AST2600_I2CM_PKT_TIMEOUT BIT(18)
+#define AST2600_I2CM_PKT_ERROR BIT(17)
+#define AST2600_I2CM_PKT_DONE BIT(16)
+
+#define AST2600_I2CM_BUS_RECOVER_FAIL BIT(15)
+#define AST2600_I2CM_SDA_DL_TO BIT(14)
+#define AST2600_I2CM_BUS_RECOVER BIT(13)
+#define AST2600_I2CM_SMBUS_ALERT BIT(12)
+
+#define AST2600_I2CM_SCL_LOW_TO BIT(6)
+#define AST2600_I2CM_ABNORMAL BIT(5)
+#define AST2600_I2CM_NORMAL_STOP BIT(4)
+#define AST2600_I2CM_ARBIT_LOSS BIT(3)
+#define AST2600_I2CM_RX_DONE BIT(2)
+#define AST2600_I2CM_TX_NAK BIT(1)
+#define AST2600_I2CM_TX_ACK BIT(0)
+
+/* 0x18 : I2CM Controller Command/Status Register */
+#define AST2600_I2CM_CMD_STS 0x18
+#define AST2600_I2CM_PKT_ADDR(x) (((x) & GENMASK(6, 0)) << 24)
+#define AST2600_I2CM_PKT_EN BIT(16)
+#define AST2600_I2CM_SDA_OE_OUT_DIR BIT(15)
+#define AST2600_I2CM_SDA_O_OUT_DIR BIT(14)
+#define AST2600_I2CM_SCL_OE_OUT_DIR BIT(13)
+#define AST2600_I2CM_SCL_O_OUT_DIR BIT(12)
+#define AST2600_I2CM_RECOVER_CMD_EN BIT(11)
+
+#define AST2600_I2CM_RX_DMA_EN BIT(9)
+#define AST2600_I2CM_TX_DMA_EN BIT(8)
+/* Command Bit */
+#define AST2600_I2CM_RX_BUFF_EN BIT(7)
+#define AST2600_I2CM_TX_BUFF_EN BIT(6)
+#define AST2600_I2CM_STOP_CMD BIT(5)
+#define AST2600_I2CM_RX_CMD_LAST BIT(4)
+#define AST2600_I2CM_RX_CMD BIT(3)
+
+#define AST2600_I2CM_TX_CMD BIT(1)
+#define AST2600_I2CM_START_CMD BIT(0)
+
+/* 0x1C : I2CM Controller DMA Transfer Length Register */
+#define AST2600_I2CM_DMA_LEN 0x1C
+/* Tx Rx support length 1 ~ 4096 */
+#define AST2600_I2CM_SET_RX_DMA_LEN(x) ((((x) & GENMASK(11, 0)) << 16) | BIT(31))
+#define AST2600_I2CM_SET_TX_DMA_LEN(x) (((x) & GENMASK(11, 0)) | BIT(15))
+
+/* 0x20 : I2CS Target Interrupt Control Register */
+#define AST2600_I2CS_IER 0x20
+/* 0x24 : I2CS Target Interrupt Status Register */
+#define AST2600_I2CS_ISR 0x24
+
+#define AST2600_I2CS_ADDR_INDICATE_MASK GENMASK(31, 30)
+#define AST2600_I2CS_SLAVE_PENDING BIT(29)
+
+#define AST2600_I2CS_WAIT_TX_DMA BIT(25)
+#define AST2600_I2CS_WAIT_RX_DMA BIT(24)
+
+#define AST2600_I2CS_ADDR3_NAK BIT(22)
+#define AST2600_I2CS_ADDR2_NAK BIT(21)
+#define AST2600_I2CS_ADDR1_NAK BIT(20)
+
+#define AST2600_I2CS_ADDR_MASK GENMASK(19, 18)
+#define AST2600_I2CS_PKT_ERROR BIT(17)
+#define AST2600_I2CS_PKT_DONE BIT(16)
+#define AST2600_I2CS_INACTIVE_TO BIT(15)
+
+#define AST2600_I2CS_SLAVE_MATCH BIT(7)
+#define AST2600_I2CS_ABNOR_STOP BIT(5)
+#define AST2600_I2CS_STOP BIT(4)
+#define AST2600_I2CS_RX_DONE_NAK BIT(3)
+#define AST2600_I2CS_RX_DONE BIT(2)
+#define AST2600_I2CS_TX_NAK BIT(1)
+#define AST2600_I2CS_TX_ACK BIT(0)
+
+/* 0x28 : I2CS Target CMD/Status Register */
+#define AST2600_I2CS_CMD_STS 0x28
+#define AST2600_I2CS_ACTIVE_ALL GENMASK(18, 17)
+#define AST2600_I2CS_PKT_MODE_EN BIT(16)
+#define AST2600_I2CS_AUTO_NAK_NOADDR BIT(15)
+#define AST2600_I2CS_AUTO_NAK_EN BIT(14)
+
+#define AST2600_I2CS_ALT_EN BIT(10)
+#define AST2600_I2CS_RX_DMA_EN BIT(9)
+#define AST2600_I2CS_TX_DMA_EN BIT(8)
+#define AST2600_I2CS_RX_BUFF_EN BIT(7)
+#define AST2600_I2CS_TX_BUFF_EN BIT(6)
+#define AST2600_I2CS_RX_CMD_LAST BIT(4)
+
+#define AST2600_I2CS_TX_CMD BIT(2)
+
+#define AST2600_I2CS_DMA_LEN 0x2C
+#define AST2600_I2CS_SET_RX_DMA_LEN(x) (((((x) - 1) & GENMASK(11, 0)) << 16) | BIT(31))
+#define AST2600_I2CS_SET_TX_DMA_LEN(x) ((((x) - 1) & GENMASK(11, 0)) | BIT(15))
+
+/* I2CM Controller DMA Tx Buffer Register */
+#define AST2600_I2CM_TX_DMA 0x30
+/* I2CM Controller DMA Rx Buffer Register */
+#define AST2600_I2CM_RX_DMA 0x34
+/* I2CS Target DMA Tx Buffer Register */
+#define AST2600_I2CS_TX_DMA 0x38
+/* I2CS Target DMA Rx Buffer Register */
+#define AST2600_I2CS_RX_DMA 0x3C
+
+#define AST2600_I2CS_ADDR_CTRL 0x40
+
+#define AST2600_I2CS_ADDR3_MASK GENMASK(22, 16)
+#define AST2600_I2CS_ADDR2_MASK GENMASK(14, 8)
+#define AST2600_I2CS_ADDR1_MASK GENMASK(6, 0)
+
+#define AST2600_I2CM_DMA_LEN_STS 0x48
+#define AST2600_I2CS_DMA_LEN_STS 0x4C
+
+#define AST2600_I2C_GET_TX_DMA_LEN(x) ((x) & GENMASK(12, 0))
+#define AST2600_I2C_GET_RX_DMA_LEN(x) (((x) & GENMASK(28, 16)) >> 16)
+
+/* 0x40 : Target Device Address Register */
+#define AST2600_I2CS_ADDR3_ENABLE BIT(23)
+#define AST2600_I2CS_ADDR3(x) ((x) << 16)
+#define AST2600_I2CS_ADDR2_ENABLE BIT(15)
+#define AST2600_I2CS_ADDR2(x) ((x) << 8)
+#define AST2600_I2CS_ADDR1_ENABLE BIT(7)
+#define AST2600_I2CS_ADDR1(x) (x)
+
+#define I2C_TARGET_MSG_BUF_SIZE 4096
+
+#define AST2600_I2C_DMA_SIZE 4096
+
+#define CONTROLLER_TRIGGER_LAST_STOP (AST2600_I2CM_RX_CMD_LAST | AST2600_I2CM_STOP_CMD)
+#define TARGET_TRIGGER_CMD (AST2600_I2CS_ACTIVE_ALL | AST2600_I2CS_PKT_MODE_EN)
+
+#define AST_I2C_TIMEOUT_CLK 0x1
+
+enum xfer_mode {
+ BYTE_MODE,
+ BUFF_MODE,
+ DMA_MODE,
+};
+
+struct ast2600_i2c_bus {
+ struct i2c_adapter adap;
+ struct device *dev;
+ void __iomem *reg_base;
+ struct regmap *global_regs;
+ struct clk *clk;
+ struct i2c_timings timing_info;
+ struct completion cmd_complete;
+ struct i2c_msg *msgs;
+ u8 *controller_dma_buf;
+ dma_addr_t controller_dma_addr;
+ u32 apb_clk;
+ u32 timeout;
+ int irq;
+ int cmd_err;
+ int msgs_index;
+ int msgs_count;
+ int controller_xfer_cnt;
+ size_t buf_index;
+ size_t buf_size;
+ enum xfer_mode mode;
+ bool dma_available;
+ bool multi_master;
+ /* Buffer mode */
+ void __iomem *buf_base;
+ int (*setup_tx)(u32 cmd, struct ast2600_i2c_bus *i2c_bus);
+ int (*setup_rx)(u32 cmd, struct ast2600_i2c_bus *i2c_bus);
+};
+
+static void ast2600_i2c_ac_timing_config(struct ast2600_i2c_bus *i2c_bus)
+{
+ unsigned long base_clk[16];
+ int baseclk_idx = 0;
+ int divisor = 0;
+ u32 clk_div_reg;
+ u32 scl_low;
+ u32 scl_high;
+ u32 data;
+
+ regmap_read(i2c_bus->global_regs, AST2600_I2CG_CLK_DIV_CTRL, &clk_div_reg);
+
+ for (int i = 0; i < ARRAY_SIZE(base_clk); i++) {
+ if (i == 0)
+ base_clk[i] = i2c_bus->apb_clk;
+ else if (i < 5)
+ base_clk[i] = (i2c_bus->apb_clk * 2) /
+ (((clk_div_reg >> ((i - 1) * 8)) & GENMASK(7, 0)) + 2);
+ else
+ base_clk[i] = base_clk[4] >> (i - 4);
+
+ if ((base_clk[i] / i2c_bus->timing_info.bus_freq_hz) <= 32) {
+ baseclk_idx = i;
+ divisor = DIV_ROUND_UP(base_clk[i], i2c_bus->timing_info.bus_freq_hz);
+ break;
+ }
+ }
+ baseclk_idx = min(baseclk_idx, 15);
+ divisor = min(divisor, 32);
+ scl_low = min(divisor * 9 / 16 - 1, 15);
+ scl_high = (divisor - scl_low - 2) & GENMASK(3, 0);
+ data = (scl_high - 1) << 20 | scl_high << 16 | scl_low << 12 | baseclk_idx;
+ if (i2c_bus->timeout) {
+ data |= AST2600_I2CC_TOUTBASECLK(AST_I2C_TIMEOUT_CLK);
+ data |= AST2600_I2CC_TTIMEOUT(i2c_bus->timeout);
+ }
+
+ writel(data, i2c_bus->reg_base + AST2600_I2CC_AC_TIMING);
+}
+
+static int ast2600_i2c_recover_bus(struct ast2600_i2c_bus *i2c_bus)
+{
+ u32 state = readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF);
+ int ret = 0;
+ u32 ctrl;
+ int r;
+
+ dev_dbg(i2c_bus->dev, "%d-bus recovery bus [%x]\n", i2c_bus->adap.nr, state);
+
+ /* reset controller */
+ ctrl = readl(i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+ writel(ctrl & ~AST2600_I2CC_MASTER_EN, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+ writel(ctrl, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+
+ reinit_completion(&i2c_bus->cmd_complete);
+ i2c_bus->cmd_err = 0;
+
+ /* Check SDA/SCL status in the status register. */
+ state = readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF);
+ if (!(state & AST2600_I2CC_SDA_LINE_STS) && (state & AST2600_I2CC_SCL_LINE_STS)) {
+ writel(AST2600_I2CM_RECOVER_CMD_EN, i2c_bus->reg_base + AST2600_I2CM_CMD_STS);
+ r = wait_for_completion_timeout(&i2c_bus->cmd_complete, i2c_bus->adap.timeout);
+ if (r == 0) {
+ dev_dbg(i2c_bus->dev, "recovery timed out\n");
+ return -ETIMEDOUT;
+ } else if (i2c_bus->cmd_err) {
+ dev_dbg(i2c_bus->dev, "recovery error\n");
+ ret = -EPROTO;
+ }
+ }
+
+ /* Recovery done */
+ state = readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF);
+ if (state & AST2600_I2CC_BUS_BUSY_STS) {
+ dev_dbg(i2c_bus->dev, "Can't recover bus [%x]\n", state);
+ ret = -EPROTO;
+ }
+
+ return ret;
+}
+
+static int ast2600_i2c_setup_dma_tx(u32 cmd, struct ast2600_i2c_bus *i2c_bus)
+{
+ struct i2c_msg *msg = &i2c_bus->msgs[i2c_bus->msgs_index];
+ int xfer_len = msg->len - i2c_bus->controller_xfer_cnt;
+
+ cmd |= AST2600_I2CM_PKT_EN;
+
+ if (xfer_len > AST2600_I2C_DMA_SIZE)
+ xfer_len = AST2600_I2C_DMA_SIZE;
+ else if (i2c_bus->msgs_index + 1 == i2c_bus->msgs_count)
+ cmd |= AST2600_I2CM_STOP_CMD;
+
+ if (cmd & AST2600_I2CM_START_CMD)
+ cmd |= AST2600_I2CM_PKT_ADDR(msg->addr);
+
+ if (xfer_len) {
+ memcpy(i2c_bus->controller_dma_buf,
+ msg->buf + i2c_bus->controller_xfer_cnt, xfer_len);
+ cmd |= AST2600_I2CM_TX_DMA_EN | AST2600_I2CM_TX_CMD;
+ writel(AST2600_I2CM_SET_TX_DMA_LEN(xfer_len - 1),
+ i2c_bus->reg_base + AST2600_I2CM_DMA_LEN);
+ }
+
+ writel(cmd, i2c_bus->reg_base + AST2600_I2CM_CMD_STS);
+
+ return 0;
+}
+
+static int ast2600_i2c_setup_buff_tx(u32 cmd, struct ast2600_i2c_bus *i2c_bus)
+{
+ struct i2c_msg *msg = &i2c_bus->msgs[i2c_bus->msgs_index];
+ int xfer_len = msg->len - i2c_bus->controller_xfer_cnt;
+ u32 wbuf_dword;
+ int i;
+
+ cmd |= AST2600_I2CM_PKT_EN;
+
+ if (xfer_len > i2c_bus->buf_size)
+ xfer_len = i2c_bus->buf_size;
+ else if (i2c_bus->msgs_index + 1 == i2c_bus->msgs_count)
+ cmd |= AST2600_I2CM_STOP_CMD;
+
+ if (cmd & AST2600_I2CM_START_CMD)
+ cmd |= AST2600_I2CM_PKT_ADDR(msg->addr);
+
+ if (xfer_len) {
+ cmd |= AST2600_I2CM_TX_BUFF_EN | AST2600_I2CM_TX_CMD;
+ /*
+ * The controller's buffer register supports dword writes only.
+ * Therefore, write dwords to the buffer register in a 4-byte aligned,
+ * and write the remaining unaligned data at the end.
+ */
+ for (i = 0; i < xfer_len; i += 4) {
+ int xfer_cnt = i2c_bus->controller_xfer_cnt + i;
+
+ switch (min(xfer_len - i, 4) % 4) {
+ case 1:
+ wbuf_dword = msg->buf[xfer_cnt];
+ break;
+ case 2:
+ wbuf_dword = get_unaligned_le16(&msg->buf[xfer_cnt]);
+ break;
+ case 3:
+ wbuf_dword = get_unaligned_le24(&msg->buf[xfer_cnt]);
+ break;
+ default:
+ wbuf_dword = get_unaligned_le32(&msg->buf[xfer_cnt]);
+ break;
+ }
+ writel(wbuf_dword, i2c_bus->buf_base + i);
+ }
+ writel(AST2600_I2CC_SET_TX_BUF_LEN(xfer_len),
+ i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+ }
+
+ writel(cmd, i2c_bus->reg_base + AST2600_I2CM_CMD_STS);
+
+ return 0;
+}
+
+static int ast2600_i2c_setup_byte_tx(u32 cmd, struct ast2600_i2c_bus *i2c_bus)
+{
+ struct i2c_msg *msg = &i2c_bus->msgs[i2c_bus->msgs_index];
+ int xfer_len;
+
+ xfer_len = msg->len - i2c_bus->controller_xfer_cnt;
+
+ cmd |= AST2600_I2CM_PKT_EN;
+
+ if (cmd & AST2600_I2CM_START_CMD)
+ cmd |= AST2600_I2CM_PKT_ADDR(msg->addr);
+
+ if ((i2c_bus->msgs_index + 1 == i2c_bus->msgs_count) &&
+ ((i2c_bus->controller_xfer_cnt + 1) == msg->len))
+ cmd |= AST2600_I2CM_STOP_CMD;
+
+ if (xfer_len) {
+ cmd |= AST2600_I2CM_TX_CMD;
+ writel(msg->buf[i2c_bus->controller_xfer_cnt],
+ i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF);
+ }
+
+ writel(cmd, i2c_bus->reg_base + AST2600_I2CM_CMD_STS);
+
+ return 0;
+}
+
+static int ast2600_i2c_setup_dma_rx(u32 cmd, struct ast2600_i2c_bus *i2c_bus)
+{
+ struct i2c_msg *msg = &i2c_bus->msgs[i2c_bus->msgs_index];
+ int xfer_len = msg->len - i2c_bus->controller_xfer_cnt;
+
+ cmd |= AST2600_I2CM_PKT_EN | AST2600_I2CM_RX_DMA_EN | AST2600_I2CM_RX_CMD;
+
+ if (msg->flags & I2C_M_RECV_LEN)
+ xfer_len = 1;
+ else if (xfer_len > AST2600_I2C_DMA_SIZE)
+ xfer_len = AST2600_I2C_DMA_SIZE;
+ else if (i2c_bus->msgs_index + 1 == i2c_bus->msgs_count)
+ cmd |= CONTROLLER_TRIGGER_LAST_STOP;
+
+ writel(AST2600_I2CM_SET_RX_DMA_LEN(xfer_len - 1), i2c_bus->reg_base + AST2600_I2CM_DMA_LEN);
+
+ if (cmd & AST2600_I2CM_START_CMD)
+ cmd |= AST2600_I2CM_PKT_ADDR(msg->addr);
+
+ writel(cmd, i2c_bus->reg_base + AST2600_I2CM_CMD_STS);
+
+ return 0;
+}
+
+static int ast2600_i2c_setup_buff_rx(u32 cmd, struct ast2600_i2c_bus *i2c_bus)
+{
+ struct i2c_msg *msg = &i2c_bus->msgs[i2c_bus->msgs_index];
+ int xfer_len = msg->len - i2c_bus->controller_xfer_cnt;
+
+ cmd |= AST2600_I2CM_PKT_EN | AST2600_I2CM_RX_BUFF_EN | AST2600_I2CM_RX_CMD;
+
+ if (cmd & AST2600_I2CM_START_CMD)
+ cmd |= AST2600_I2CM_PKT_ADDR(msg->addr);
+
+ if (msg->flags & I2C_M_RECV_LEN) {
+ dev_dbg(i2c_bus->dev, "smbus read\n");
+ xfer_len = 1;
+ } else if (xfer_len > i2c_bus->buf_size) {
+ xfer_len = i2c_bus->buf_size;
+ } else if (i2c_bus->msgs_index + 1 == i2c_bus->msgs_count) {
+ cmd |= CONTROLLER_TRIGGER_LAST_STOP;
+ }
+ writel(AST2600_I2CC_SET_RX_BUF_LEN(xfer_len), i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+
+ writel(cmd, i2c_bus->reg_base + AST2600_I2CM_CMD_STS);
+
+ return 0;
+}
+
+static int ast2600_i2c_setup_byte_rx(u32 cmd, struct ast2600_i2c_bus *i2c_bus)
+{
+ struct i2c_msg *msg = &i2c_bus->msgs[i2c_bus->msgs_index];
+
+ cmd |= AST2600_I2CM_PKT_EN | AST2600_I2CM_RX_CMD;
+
+ if (cmd & AST2600_I2CM_START_CMD)
+ cmd |= AST2600_I2CM_PKT_ADDR(msg->addr);
+
+ if (msg->flags & I2C_M_RECV_LEN) {
+ dev_dbg(i2c_bus->dev, "smbus read\n");
+ } else if ((i2c_bus->msgs_index + 1 == i2c_bus->msgs_count) &&
+ ((i2c_bus->controller_xfer_cnt + 1) == msg->len)) {
+ cmd |= CONTROLLER_TRIGGER_LAST_STOP;
+ }
+
+ writel(cmd, i2c_bus->reg_base + AST2600_I2CM_CMD_STS);
+
+ return 0;
+}
+
+static int ast2600_i2c_do_start(struct ast2600_i2c_bus *i2c_bus)
+{
+ struct i2c_msg *msg = &i2c_bus->msgs[i2c_bus->msgs_index];
+
+ /* send start */
+ dev_dbg(i2c_bus->dev, "[%d] %s %d byte%s %s 0x%02x\n",
+ i2c_bus->msgs_index, str_read_write(msg->flags & I2C_M_RD),
+ msg->len, str_plural(msg->len),
+ msg->flags & I2C_M_RD ? "from" : "to", msg->addr);
+
+ if (!i2c_bus->setup_rx || !i2c_bus->setup_tx)
+ return -EINVAL;
+
+ i2c_bus->controller_xfer_cnt = 0;
+ i2c_bus->buf_index = 0;
+
+ if (msg->flags & I2C_M_RD)
+ return i2c_bus->setup_rx(AST2600_I2CM_START_CMD, i2c_bus);
+
+ return i2c_bus->setup_tx(AST2600_I2CM_START_CMD, i2c_bus);
+}
+
+static int ast2600_i2c_irq_err_to_errno(u32 irq_status)
+{
+ if (irq_status & AST2600_I2CM_ARBIT_LOSS)
+ return -EAGAIN;
+ if (irq_status & (AST2600_I2CM_SDA_DL_TO | AST2600_I2CM_SCL_LOW_TO))
+ return -ETIMEDOUT;
+ if (irq_status & (AST2600_I2CM_ABNORMAL))
+ return -EPROTO;
+
+ return 0;
+}
+
+static void ast2600_i2c_controller_packet_irq(struct ast2600_i2c_bus *i2c_bus, u32 sts)
+{
+ struct i2c_msg *msg = &i2c_bus->msgs[i2c_bus->msgs_index];
+ int xfer_len;
+ int i;
+
+ sts &= ~AST2600_I2CM_PKT_DONE;
+ writel(AST2600_I2CM_PKT_DONE, i2c_bus->reg_base + AST2600_I2CM_ISR);
+ switch (sts) {
+ case AST2600_I2CM_PKT_ERROR:
+ i2c_bus->cmd_err = -EAGAIN;
+ complete(&i2c_bus->cmd_complete);
+ break;
+ case AST2600_I2CM_PKT_ERROR | AST2600_I2CM_TX_NAK: /* a0 fix for issue */
+ fallthrough;
+ case AST2600_I2CM_PKT_ERROR | AST2600_I2CM_TX_NAK | AST2600_I2CM_NORMAL_STOP:
+ i2c_bus->cmd_err = -ENXIO;
+ complete(&i2c_bus->cmd_complete);
+ break;
+ case AST2600_I2CM_NORMAL_STOP:
+ /* write 0 byte only have stop isr */
+ i2c_bus->msgs_index++;
+ if (i2c_bus->msgs_index < i2c_bus->msgs_count) {
+ if (ast2600_i2c_do_start(i2c_bus)) {
+ i2c_bus->cmd_err = -ENOMEM;
+ complete(&i2c_bus->cmd_complete);
+ }
+ } else {
+ i2c_bus->cmd_err = i2c_bus->msgs_index;
+ complete(&i2c_bus->cmd_complete);
+ }
+ break;
+ case AST2600_I2CM_TX_ACK:
+ case AST2600_I2CM_TX_ACK | AST2600_I2CM_NORMAL_STOP:
+ if (i2c_bus->mode == DMA_MODE)
+ xfer_len = AST2600_I2C_GET_TX_DMA_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CM_DMA_LEN_STS));
+ else if (i2c_bus->mode == BUFF_MODE)
+ xfer_len = AST2600_I2CC_GET_TX_BUF_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CC_BUFF_CTRL));
+ else
+ xfer_len = 1;
+
+ i2c_bus->controller_xfer_cnt += xfer_len;
+
+ if (i2c_bus->controller_xfer_cnt == msg->len) {
+ i2c_bus->msgs_index++;
+ if (i2c_bus->msgs_index == i2c_bus->msgs_count) {
+ i2c_bus->cmd_err = i2c_bus->msgs_index;
+ complete(&i2c_bus->cmd_complete);
+ } else {
+ if (ast2600_i2c_do_start(i2c_bus)) {
+ i2c_bus->cmd_err = -ENOMEM;
+ complete(&i2c_bus->cmd_complete);
+ }
+ }
+ } else {
+ i2c_bus->setup_tx(0, i2c_bus);
+ }
+ break;
+ case AST2600_I2CM_RX_DONE:
+ case AST2600_I2CM_RX_DONE | AST2600_I2CM_NORMAL_STOP:
+ /* do next rx */
+ if (i2c_bus->mode == DMA_MODE) {
+ xfer_len = AST2600_I2C_GET_RX_DMA_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CM_DMA_LEN_STS));
+ memcpy(&msg->buf[i2c_bus->controller_xfer_cnt],
+ i2c_bus->controller_dma_buf, xfer_len);
+ } else if (i2c_bus->mode == BUFF_MODE) {
+ xfer_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CC_BUFF_CTRL));
+ for (i = 0; i < xfer_len; i++)
+ msg->buf[i2c_bus->controller_xfer_cnt + i] =
+ readb(i2c_bus->buf_base + 0x10 + i);
+ } else {
+ xfer_len = 1;
+ msg->buf[i2c_bus->controller_xfer_cnt] =
+ AST2600_I2CC_GET_RX_BUFF(readl(i2c_bus->reg_base +
+ AST2600_I2CC_STS_AND_BUFF));
+ }
+
+ if (msg->flags & I2C_M_RECV_LEN) {
+ u8 recv_len = AST2600_I2CC_GET_RX_BUFF(readl(i2c_bus->reg_base
+ + AST2600_I2CC_STS_AND_BUFF));
+ msg->len = min_t(unsigned int, recv_len, I2C_SMBUS_BLOCK_MAX);
+ msg->len += ((msg->flags & I2C_CLIENT_PEC) ? 2 : 1);
+ msg->flags &= ~I2C_M_RECV_LEN;
+ if (!recv_len)
+ i2c_bus->controller_xfer_cnt = 0;
+ else
+ i2c_bus->controller_xfer_cnt = 1;
+ } else {
+ i2c_bus->controller_xfer_cnt += xfer_len;
+ }
+
+ if (i2c_bus->controller_xfer_cnt == msg->len) {
+ i2c_bus->msgs_index++;
+ if (i2c_bus->msgs_index == i2c_bus->msgs_count) {
+ i2c_bus->cmd_err = i2c_bus->msgs_index;
+ complete(&i2c_bus->cmd_complete);
+ } else {
+ if (ast2600_i2c_do_start(i2c_bus)) {
+ i2c_bus->cmd_err = -ENOMEM;
+ complete(&i2c_bus->cmd_complete);
+ }
+ }
+ } else {
+ i2c_bus->setup_rx(0, i2c_bus);
+ }
+ break;
+ default:
+ dev_dbg(i2c_bus->dev, "unhandled sts %x\n", sts);
+ break;
+ }
+}
+
+static int ast2600_i2c_controller_irq(struct ast2600_i2c_bus *i2c_bus)
+{
+ u32 sts = readl(i2c_bus->reg_base + AST2600_I2CM_ISR);
+ u32 ctrl;
+
+ sts &= ~AST2600_I2CM_SMBUS_ALERT;
+
+ if (sts & AST2600_I2CM_BUS_RECOVER_FAIL) {
+ writel(AST2600_I2CM_BUS_RECOVER_FAIL, i2c_bus->reg_base + AST2600_I2CM_ISR);
+ ctrl = readl(i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+ writel(0, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+ writel(ctrl, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+ i2c_bus->cmd_err = -EPROTO;
+ complete(&i2c_bus->cmd_complete);
+ return 1;
+ }
+
+ if (sts & AST2600_I2CM_BUS_RECOVER) {
+ writel(AST2600_I2CM_BUS_RECOVER, i2c_bus->reg_base + AST2600_I2CM_ISR);
+ i2c_bus->cmd_err = 0;
+ complete(&i2c_bus->cmd_complete);
+ return 1;
+ }
+
+ i2c_bus->cmd_err = ast2600_i2c_irq_err_to_errno(sts);
+ if (i2c_bus->cmd_err) {
+ writel(AST2600_I2CM_PKT_DONE, i2c_bus->reg_base + AST2600_I2CM_ISR);
+ complete(&i2c_bus->cmd_complete);
+ return 1;
+ }
+
+ if (sts & AST2600_I2CM_PKT_DONE) {
+ ast2600_i2c_controller_packet_irq(i2c_bus, sts);
+ return 1;
+ }
+
+ return 0;
+}
+
+static irqreturn_t ast2600_i2c_bus_irq(int irq, void *dev_id)
+{
+ struct ast2600_i2c_bus *i2c_bus = dev_id;
+
+ return IRQ_RETVAL(ast2600_i2c_controller_irq(i2c_bus));
+}
+
+static int ast2600_i2c_controller_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct ast2600_i2c_bus *i2c_bus = i2c_get_adapdata(adap);
+ unsigned long timeout;
+ int ret;
+
+ if (!i2c_bus->multi_master &&
+ (readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF) & AST2600_I2CC_BUS_BUSY_STS)) {
+ ret = ast2600_i2c_recover_bus(i2c_bus);
+ if (ret)
+ return ret;
+ }
+
+ i2c_bus->cmd_err = 0;
+ i2c_bus->msgs = msgs;
+ i2c_bus->msgs_index = 0;
+ i2c_bus->msgs_count = num;
+ reinit_completion(&i2c_bus->cmd_complete);
+ ret = ast2600_i2c_do_start(i2c_bus);
+ if (ret)
+ goto controller_out;
+ timeout = wait_for_completion_timeout(&i2c_bus->cmd_complete, i2c_bus->adap.timeout);
+ if (timeout == 0) {
+ u32 ctrl = readl(i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+
+ dev_dbg(i2c_bus->dev, "timeout isr[%x], sts[%x]\n",
+ readl(i2c_bus->reg_base + AST2600_I2CM_ISR),
+ readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF));
+ writel(ctrl & ~AST2600_I2CC_MASTER_EN, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+ writel(ctrl, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+
+ /*
+ * A slave holding SCL low can stall the transfer and trigger
+ * a master timeout. In multi-master mode, attempt bus recovery
+ * if the bus is still busy.
+ */
+ if (i2c_bus->multi_master &&
+ (readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF) &
+ AST2600_I2CC_BUS_BUSY_STS))
+ ast2600_i2c_recover_bus(i2c_bus);
+ ret = -ETIMEDOUT;
+ } else {
+ ret = i2c_bus->cmd_err;
+ }
+
+ dev_dbg(i2c_bus->dev, "bus%d-m: %d end\n", i2c_bus->adap.nr, i2c_bus->cmd_err);
+
+controller_out:
+ return ret;
+}
+
+static int ast2600_i2c_init(struct ast2600_i2c_bus *i2c_bus)
+{
+ u32 fun_ctrl = AST2600_I2CC_BUS_AUTO_RELEASE | AST2600_I2CC_MASTER_EN;
+
+ /* I2C Reset */
+ writel(0, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+
+ if (!i2c_bus->multi_master)
+ fun_ctrl |= AST2600_I2CC_MULTI_MASTER_DIS;
+
+ /* Enable Controller Mode */
+ writel(fun_ctrl, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+ /* disable target address */
+ writel(0, i2c_bus->reg_base + AST2600_I2CS_ADDR_CTRL);
+
+ /* Set AC Timing */
+ ast2600_i2c_ac_timing_config(i2c_bus);
+
+ if (i2c_bus->dma_available) {
+ i2c_bus->controller_dma_buf =
+ dmam_alloc_coherent(i2c_bus->dev, AST2600_I2C_DMA_SIZE,
+ &i2c_bus->controller_dma_addr, GFP_KERNEL);
+ if (!i2c_bus->controller_dma_buf)
+ return -ENOMEM;
+ writel(i2c_bus->controller_dma_addr,
+ i2c_bus->reg_base + AST2600_I2CM_TX_DMA);
+ writel(i2c_bus->controller_dma_addr,
+ i2c_bus->reg_base + AST2600_I2CM_RX_DMA);
+ }
+
+ /* Clear Interrupt */
+ writel(GENMASK(27, 0), i2c_bus->reg_base + AST2600_I2CM_ISR);
+
+ return 0;
+}
+
+static u32 ast2600_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm i2c_ast2600_algorithm = {
+ .xfer = ast2600_i2c_controller_xfer,
+ .functionality = ast2600_i2c_functionality,
+};
+
+static void ast2600_i2c_set_xfer_mode(struct ast2600_i2c_bus *i2c_bus,
+ enum xfer_mode mode)
+{
+ i2c_bus->mode = mode;
+
+ switch (mode) {
+ case DMA_MODE:
+ i2c_bus->setup_tx = ast2600_i2c_setup_dma_tx;
+ i2c_bus->setup_rx = ast2600_i2c_setup_dma_rx;
+ break;
+ case BYTE_MODE:
+ i2c_bus->setup_tx = ast2600_i2c_setup_byte_tx;
+ i2c_bus->setup_rx = ast2600_i2c_setup_byte_rx;
+ break;
+ case BUFF_MODE:
+ default:
+ i2c_bus->setup_tx = ast2600_i2c_setup_buff_tx;
+ i2c_bus->setup_rx = ast2600_i2c_setup_buff_rx;
+ break;
+ }
+}
+
+static int ast2600_i2c_xfer_mode_parse(const char *buf, enum xfer_mode *mode)
+{
+ if (sysfs_streq(buf, "byte")) {
+ *mode = BYTE_MODE;
+ return 0;
+ }
+
+ if (sysfs_streq(buf, "buffer")) {
+ *mode = BUFF_MODE;
+ return 0;
+ }
+
+ if (sysfs_streq(buf, "dma")) {
+ *mode = DMA_MODE;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int ast2600_i2c_xfer_mode_check(struct ast2600_i2c_bus *i2c_bus,
+ enum xfer_mode mode)
+{
+ if (mode == BUFF_MODE && !i2c_bus->buf_base)
+ return -EINVAL;
+ if (mode == DMA_MODE && !i2c_bus->dma_available)
+ return -EINVAL;
+ return 0;
+}
+
+static const char *ast2600_i2c_xfer_mode_name(enum xfer_mode mode)
+{
+ switch (mode) {
+ case BYTE_MODE:
+ return "byte";
+ case DMA_MODE:
+ return "dma";
+ case BUFF_MODE:
+ default:
+ return "buffer";
+ }
+}
+
+static ssize_t xfer_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct ast2600_i2c_bus *i2c_bus = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%s\n", ast2600_i2c_xfer_mode_name(i2c_bus->mode));
+}
+
+static ssize_t xfer_mode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ast2600_i2c_bus *i2c_bus = dev_get_drvdata(dev);
+ enum xfer_mode mode;
+ int ret;
+
+ ret = ast2600_i2c_xfer_mode_parse(buf, &mode);
+ if (ret)
+ return ret;
+
+ ret = ast2600_i2c_xfer_mode_check(i2c_bus, mode);
+ if (ret)
+ return ret;
+
+ i2c_lock_bus(&i2c_bus->adap, I2C_LOCK_ROOT_ADAPTER);
+ ast2600_i2c_set_xfer_mode(i2c_bus, mode);
+ i2c_unlock_bus(&i2c_bus->adap, I2C_LOCK_ROOT_ADAPTER);
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(xfer_mode);
+
+static int ast2600_i2c_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ast2600_i2c_bus *i2c_bus;
+ void __iomem *buf_base;
+ struct reset_control *rst;
+ struct resource *res;
+ u32 global_ctrl;
+ int ret;
+
+ if (!device_property_present(dev, "aspeed,global-regs"))
+ return -ENODEV;
+
+ i2c_bus = devm_kzalloc(dev, sizeof(*i2c_bus), GFP_KERNEL);
+ if (!i2c_bus)
+ return -ENOMEM;
+
+ i2c_bus->reg_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(i2c_bus->reg_base))
+ return PTR_ERR(i2c_bus->reg_base);
+
+ rst = devm_reset_control_get_shared_deasserted(dev, NULL);
+ if (IS_ERR(rst))
+ return dev_err_probe(dev, PTR_ERR(rst), "Missing reset ctrl\n");
+
+ i2c_bus->global_regs =
+ syscon_regmap_lookup_by_phandle(dev_of_node(dev), "aspeed,global-regs");
+ if (IS_ERR(i2c_bus->global_regs))
+ return PTR_ERR(i2c_bus->global_regs);
+
+ regmap_read(i2c_bus->global_regs, AST2600_I2CG_CTRL, &global_ctrl);
+ if ((global_ctrl & AST2600_GLOBAL_INIT) != AST2600_GLOBAL_INIT) {
+ regmap_write(i2c_bus->global_regs, AST2600_I2CG_CTRL, AST2600_GLOBAL_INIT);
+ regmap_write(i2c_bus->global_regs, AST2600_I2CG_CLK_DIV_CTRL, I2CCG_DIV_CTRL);
+ }
+
+ i2c_bus->dev = dev;
+ i2c_bus->multi_master = device_property_read_bool(dev, "multi-master");
+ i2c_bus->dma_available = device_property_read_bool(dev, "aspeed,enable-dma");
+
+ buf_base = devm_platform_get_and_ioremap_resource(pdev, 1, &res);
+ if (!IS_ERR(buf_base)) {
+ i2c_bus->buf_base = buf_base;
+ i2c_bus->buf_size = resource_size(res) / 2;
+ }
+
+ enum xfer_mode mode;
+
+ if (i2c_bus->dma_available)
+ mode = DMA_MODE;
+ else if (i2c_bus->buf_base)
+ mode = BUFF_MODE;
+ else
+ mode = BYTE_MODE;
+
+ ast2600_i2c_set_xfer_mode(i2c_bus, mode);
+
+ /*
+ * i2c timeout counter: use base clk4 1Mhz,
+ * per unit: 1/(1000/1024) = 1024us
+ */
+ ret = device_property_read_u32(dev, "i2c-scl-clk-low-timeout-us", &i2c_bus->timeout);
+ if (!ret)
+ i2c_bus->timeout = DIV_ROUND_UP(i2c_bus->timeout, 1024);
+
+ init_completion(&i2c_bus->cmd_complete);
+
+ i2c_bus->irq = platform_get_irq(pdev, 0);
+ if (i2c_bus->irq < 0)
+ return i2c_bus->irq;
+
+ platform_set_drvdata(pdev, i2c_bus);
+
+ i2c_bus->clk = devm_clk_get(i2c_bus->dev, NULL);
+ if (IS_ERR(i2c_bus->clk))
+ return dev_err_probe(i2c_bus->dev, PTR_ERR(i2c_bus->clk), "Can't get clock\n");
+
+ i2c_bus->apb_clk = clk_get_rate(i2c_bus->clk);
+
+ i2c_parse_fw_timings(i2c_bus->dev, &i2c_bus->timing_info, true);
+
+ /* Initialize the I2C adapter */
+ i2c_bus->adap.owner = THIS_MODULE;
+ i2c_bus->adap.algo = &i2c_ast2600_algorithm;
+ i2c_bus->adap.retries = 0;
+ i2c_bus->adap.dev.parent = i2c_bus->dev;
+ device_set_node(&i2c_bus->adap.dev, dev_fwnode(dev));
+ i2c_bus->adap.algo_data = i2c_bus;
+ strscpy(i2c_bus->adap.name, pdev->name);
+ i2c_set_adapdata(&i2c_bus->adap, i2c_bus);
+
+ ret = ast2600_i2c_init(i2c_bus);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Unable to initialize i2c %d\n", ret);
+
+ ret = devm_request_irq(dev, i2c_bus->irq, ast2600_i2c_bus_irq, 0,
+ dev_name(dev), i2c_bus);
+ if (ret < 0) {
+ ret = dev_err_probe(dev, ret, "Unable to request irq %d\n",
+ i2c_bus->irq);
+ goto err;
+ }
+
+ writel(AST2600_I2CM_PKT_DONE | AST2600_I2CM_BUS_RECOVER,
+ i2c_bus->reg_base + AST2600_I2CM_IER);
+
+ ret = sysfs_create_file(&dev->kobj, &dev_attr_xfer_mode.attr);
+ if (ret)
+ goto err;
+
+ ret = devm_i2c_add_adapter(dev, &i2c_bus->adap);
+ if (ret) {
+ sysfs_remove_file(&dev->kobj, &dev_attr_xfer_mode.attr);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ writel(0, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+ writel(0, i2c_bus->reg_base + AST2600_I2CM_IER);
+ return ret;
+}
+
+static void ast2600_i2c_remove(struct platform_device *pdev)
+{
+ struct ast2600_i2c_bus *i2c_bus = platform_get_drvdata(pdev);
+
+ sysfs_remove_file(&pdev->dev.kobj, &dev_attr_xfer_mode.attr);
+
+ /* Disable everything. */
+ writel(0, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+ writel(0, i2c_bus->reg_base + AST2600_I2CM_IER);
+}
+
+static const struct of_device_id ast2600_i2c_of_match[] = {
+ { .compatible = "aspeed,ast2600-i2c-bus" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ast2600_i2c_of_match);
+
+static struct platform_driver ast2600_i2c_driver = {
+ .probe = ast2600_i2c_probe,
+ .remove = ast2600_i2c_remove,
+ .driver = {
+ .name = "ast2600-i2c",
+ .of_match_table = ast2600_i2c_of_match,
+ },
+};
+module_platform_driver(ast2600_i2c_driver);
+
+MODULE_AUTHOR("Ryan Chen <ryan_chen@aspeedtech.com>");
+MODULE_DESCRIPTION("ASPEED AST2600 I2C Controller Driver");
+MODULE_LICENSE("GPL");
--
2.34.1
^ permalink raw reply related
* [PATCH v28 4/4] i2c: ast2600: Add target mode support
From: Ryan Chen @ 2026-03-30 8:21 UTC (permalink / raw)
To: jk, andriy.shevchenko, Andi Shyti, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery,
Benjamin Herrenschmidt, Rayn Chen, Philipp Zabel
Cc: linux-i2c, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, openbmc, Ryan Chen
In-Reply-To: <20260330-upstream_i2c-v28-0-17bdae39c5cb@aspeedtech.com>
Add target mode support to the AST2600 I2C driver.
Target mode features implemented include:
- Add target interrupt handling
- Address match and response logic
- Separate Tx/Rx DMA address and length configuration
This complements the existing controller-mode support, enabling
dual-role capability.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
Changes in v28:
- fix typo condication -> condition
- fix compile error, when disable CONFIG_I2C_SLAVE
Changes in v26:
- change int to bool target_operate
- rename target_operate to target_active
- use i2c_bus->target replace require IO
- use WRITE_ONCE replace target_operate write.
---
drivers/i2c/busses/i2c-ast2600.c | 566 +++++++++++++++++++++++++++++++++++++++
1 file changed, 566 insertions(+)
diff --git a/drivers/i2c/busses/i2c-ast2600.c b/drivers/i2c/busses/i2c-ast2600.c
index c2368ba309a7..a9b77917a1fe 100644
--- a/drivers/i2c/busses/i2c-ast2600.c
+++ b/drivers/i2c/busses/i2c-ast2600.c
@@ -274,6 +274,13 @@ struct ast2600_i2c_bus {
void __iomem *buf_base;
int (*setup_tx)(u32 cmd, struct ast2600_i2c_bus *i2c_bus);
int (*setup_rx)(u32 cmd, struct ast2600_i2c_bus *i2c_bus);
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ /* target structure */
+ bool target_active;
+ unsigned char *target_dma_buf;
+ dma_addr_t target_dma_addr;
+ struct i2c_client *target;
+#endif
};
static void ast2600_i2c_ac_timing_config(struct ast2600_i2c_bus *i2c_bus)
@@ -357,6 +364,440 @@ static int ast2600_i2c_recover_bus(struct ast2600_i2c_bus *i2c_bus)
return ret;
}
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static void ast2600_i2c_target_packet_dma_irq(struct ast2600_i2c_bus *i2c_bus, u32 sts)
+{
+ int target_rx_len = 0;
+ u32 cmd = 0;
+ u8 value;
+ int i;
+
+ sts &= ~(AST2600_I2CS_SLAVE_PENDING);
+ /* Handle i2c target timeout condition */
+ if (sts & AST2600_I2CS_INACTIVE_TO) {
+ /* Reset timeout counter */
+ u32 ac_timing = readl(i2c_bus->reg_base + AST2600_I2CC_AC_TIMING) &
+ AST2600_I2CC_AC_TIMING_MASK;
+
+ writel(ac_timing, i2c_bus->reg_base + AST2600_I2CC_AC_TIMING);
+ ac_timing |= AST2600_I2CC_TTIMEOUT(i2c_bus->timeout);
+ writel(ac_timing, i2c_bus->reg_base + AST2600_I2CC_AC_TIMING);
+ cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_RX_DMA_EN;
+ writel(AST2600_I2CS_SET_RX_DMA_LEN(I2C_TARGET_MSG_BUF_SIZE),
+ i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+ writel(cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+ writel(AST2600_I2CS_PKT_DONE, i2c_bus->reg_base + AST2600_I2CS_ISR);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ return;
+ }
+
+ sts &= ~(AST2600_I2CS_PKT_DONE | AST2600_I2CS_PKT_ERROR);
+
+ switch (sts) {
+ case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_RX_DMA:
+ case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_WAIT_RX_DMA:
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+ target_rx_len = AST2600_I2C_GET_RX_DMA_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CS_DMA_LEN_STS));
+ for (i = 0; i < target_rx_len; i++) {
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED,
+ &i2c_bus->target_dma_buf[i]);
+ }
+ writel(AST2600_I2CS_SET_RX_DMA_LEN(I2C_TARGET_MSG_BUF_SIZE),
+ i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+ cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_RX_DMA_EN;
+ break;
+ case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_STOP:
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ writel(AST2600_I2CS_SET_RX_DMA_LEN(I2C_TARGET_MSG_BUF_SIZE),
+ i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+ cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_RX_DMA_EN;
+ break;
+ case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE_NAK |
+ AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+ case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_WAIT_RX_DMA |
+ AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+ case AST2600_I2CS_RX_DONE_NAK | AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+ case AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_RX_DMA | AST2600_I2CS_STOP:
+ case AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+ case AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_RX_DMA:
+ case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+ if (sts & AST2600_I2CS_SLAVE_MATCH)
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+
+ target_rx_len = AST2600_I2C_GET_RX_DMA_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CS_DMA_LEN_STS));
+ for (i = 0; i < target_rx_len; i++) {
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED,
+ &i2c_bus->target_dma_buf[i]);
+ }
+ writel(AST2600_I2CS_SET_RX_DMA_LEN(I2C_TARGET_MSG_BUF_SIZE),
+ i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+ if (sts & AST2600_I2CS_STOP)
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_RX_DMA_EN;
+ break;
+
+ /* it is Mw data Mr coming -> it need send tx */
+ case AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_TX_DMA:
+ case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_TX_DMA:
+ /* it should be repeat start read */
+ if (sts & AST2600_I2CS_SLAVE_MATCH)
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+
+ target_rx_len = AST2600_I2C_GET_RX_DMA_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CS_DMA_LEN_STS));
+ for (i = 0; i < target_rx_len; i++) {
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED,
+ &i2c_bus->target_dma_buf[i]);
+ }
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_REQUESTED,
+ &i2c_bus->target_dma_buf[0]);
+ writel(AST2600_I2CS_SET_TX_DMA_LEN(1),
+ i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+ cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_TX_DMA_EN;
+ break;
+ case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_WAIT_TX_DMA:
+ /* First Start read */
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_REQUESTED,
+ &i2c_bus->target_dma_buf[0]);
+ writel(AST2600_I2CS_SET_TX_DMA_LEN(1),
+ i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+ cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_TX_DMA_EN;
+ break;
+ case AST2600_I2CS_WAIT_TX_DMA:
+ /* it should be next start read */
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_PROCESSED,
+ &i2c_bus->target_dma_buf[0]);
+ writel(AST2600_I2CS_SET_TX_DMA_LEN(1),
+ i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+ cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_TX_DMA_EN;
+ break;
+ case AST2600_I2CS_TX_NAK | AST2600_I2CS_STOP:
+ /* it just tx complete */
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ writel(AST2600_I2CS_SET_RX_DMA_LEN(I2C_TARGET_MSG_BUF_SIZE),
+ i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+ cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_RX_DMA_EN;
+ break;
+ case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE:
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+ break;
+ case AST2600_I2CS_STOP:
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ break;
+ default:
+ dev_dbg(i2c_bus->dev, "unhandled target isr case %x, sts %x\n", sts,
+ readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF));
+ break;
+ }
+
+ if (cmd)
+ writel(cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+ writel(AST2600_I2CS_PKT_DONE, i2c_bus->reg_base + AST2600_I2CS_ISR);
+ readl(i2c_bus->reg_base + AST2600_I2CS_ISR);
+}
+
+static void ast2600_i2c_target_packet_buff_irq(struct ast2600_i2c_bus *i2c_bus, u32 sts)
+{
+ int target_rx_len = 0;
+ u32 cmd = 0;
+ u8 value;
+ int i;
+
+ /* due to controller target is common buffer, need force the master stop not issue */
+ if (readl(i2c_bus->reg_base + AST2600_I2CM_CMD_STS) & GENMASK(15, 0)) {
+ writel(0, i2c_bus->reg_base + AST2600_I2CM_CMD_STS);
+ i2c_bus->cmd_err = -EBUSY;
+ writel(0, i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+ complete(&i2c_bus->cmd_complete);
+ }
+
+ /* Handle i2c target timeout condition */
+ if (AST2600_I2CS_INACTIVE_TO & sts) {
+ /* Reset timeout counter */
+ u32 ac_timing = readl(i2c_bus->reg_base + AST2600_I2CC_AC_TIMING) &
+ AST2600_I2CC_AC_TIMING_MASK;
+
+ writel(ac_timing, i2c_bus->reg_base + AST2600_I2CC_AC_TIMING);
+ ac_timing |= AST2600_I2CC_TTIMEOUT(i2c_bus->timeout);
+ writel(ac_timing, i2c_bus->reg_base + AST2600_I2CC_AC_TIMING);
+ writel(TARGET_TRIGGER_CMD, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+ writel(AST2600_I2CS_PKT_DONE, i2c_bus->reg_base + AST2600_I2CS_ISR);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ WRITE_ONCE(i2c_bus->target_active, false);
+ return;
+ }
+
+ sts &= ~(AST2600_I2CS_PKT_DONE | AST2600_I2CS_PKT_ERROR);
+
+ if (sts & AST2600_I2CS_SLAVE_MATCH)
+ WRITE_ONCE(i2c_bus->target_active, true);
+
+ switch (sts) {
+ case AST2600_I2CS_SLAVE_PENDING | AST2600_I2CS_WAIT_RX_DMA |
+ AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+ case AST2600_I2CS_SLAVE_PENDING |
+ AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+ case AST2600_I2CS_SLAVE_PENDING |
+ AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_STOP:
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ fallthrough;
+ case AST2600_I2CS_SLAVE_PENDING |
+ AST2600_I2CS_WAIT_RX_DMA | AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE:
+ case AST2600_I2CS_WAIT_RX_DMA | AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE:
+ case AST2600_I2CS_WAIT_RX_DMA | AST2600_I2CS_SLAVE_MATCH:
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+ cmd = TARGET_TRIGGER_CMD;
+ if (sts & AST2600_I2CS_RX_DONE) {
+ target_rx_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CC_BUFF_CTRL));
+ for (i = 0; i < target_rx_len; i++) {
+ value = readb(i2c_bus->buf_base + 0x10 + i);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &value);
+ }
+ }
+ if (readl(i2c_bus->reg_base + AST2600_I2CS_CMD_STS) & AST2600_I2CS_RX_BUFF_EN)
+ cmd = 0;
+ else
+ cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_RX_BUFF_EN;
+
+ writel(AST2600_I2CC_SET_RX_BUF_LEN(i2c_bus->buf_size),
+ i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+ break;
+ case AST2600_I2CS_WAIT_RX_DMA | AST2600_I2CS_RX_DONE:
+ cmd = TARGET_TRIGGER_CMD;
+ target_rx_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CC_BUFF_CTRL));
+ for (i = 0; i < target_rx_len; i++) {
+ value = readb(i2c_bus->buf_base + 0x10 + i);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &value);
+ }
+ cmd |= AST2600_I2CS_RX_BUFF_EN;
+ writel(AST2600_I2CC_SET_RX_BUF_LEN(i2c_bus->buf_size),
+ i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+ break;
+ case AST2600_I2CS_SLAVE_PENDING | AST2600_I2CS_WAIT_RX_DMA |
+ AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+ cmd = TARGET_TRIGGER_CMD;
+ target_rx_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CC_BUFF_CTRL));
+ for (i = 0; i < target_rx_len; i++) {
+ value = readb(i2c_bus->buf_base + 0x10 + i);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &value);
+ }
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ cmd |= AST2600_I2CS_RX_BUFF_EN;
+ writel(AST2600_I2CC_SET_RX_BUF_LEN(i2c_bus->buf_size),
+ i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+ break;
+ case AST2600_I2CS_SLAVE_PENDING | AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+ cmd = TARGET_TRIGGER_CMD;
+ target_rx_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CC_BUFF_CTRL));
+ for (i = 0; i < target_rx_len; i++) {
+ value = readb(i2c_bus->buf_base + 0x10 + i);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &value);
+ }
+ /* workaround for avoid next start with len != 0 */
+ writel(BIT(0), i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ break;
+ case AST2600_I2CS_RX_DONE | AST2600_I2CS_STOP:
+ cmd = TARGET_TRIGGER_CMD;
+ target_rx_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CC_BUFF_CTRL));
+ for (i = 0; i < target_rx_len; i++) {
+ value = readb(i2c_bus->buf_base + 0x10 + i);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &value);
+ }
+ /* workaround for avoid next start with len != 0 */
+ writel(BIT(0), i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ break;
+ case AST2600_I2CS_SLAVE_PENDING | AST2600_I2CS_RX_DONE |
+ AST2600_I2CS_WAIT_TX_DMA | AST2600_I2CS_STOP:
+ target_rx_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CC_BUFF_CTRL));
+ for (i = 0; i < target_rx_len; i++) {
+ value = readb(i2c_bus->buf_base + 0x10 + i);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &value);
+ }
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_REQUESTED, &value);
+ writeb(value, i2c_bus->buf_base);
+ break;
+ case AST2600_I2CS_WAIT_TX_DMA | AST2600_I2CS_SLAVE_MATCH:
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_REQUESTED, &value);
+ writeb(value, i2c_bus->buf_base);
+ writel(AST2600_I2CC_SET_TX_BUF_LEN(1),
+ i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+ cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_TX_BUFF_EN;
+ break;
+ case AST2600_I2CS_SLAVE_PENDING | AST2600_I2CS_STOP |
+ AST2600_I2CS_TX_NAK | AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE:
+ case AST2600_I2CS_SLAVE_PENDING | AST2600_I2CS_WAIT_RX_DMA | AST2600_I2CS_STOP |
+ AST2600_I2CS_TX_NAK | AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE:
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+ target_rx_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CC_BUFF_CTRL));
+ for (i = 0; i < target_rx_len; i++) {
+ value = readb(i2c_bus->buf_base + 0x10 + i);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &value);
+ }
+ writel(AST2600_I2CC_SET_RX_BUF_LEN(i2c_bus->buf_size),
+ i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+ cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_RX_BUFF_EN;
+ break;
+ case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_WAIT_TX_DMA | AST2600_I2CS_RX_DONE:
+ case AST2600_I2CS_WAIT_TX_DMA | AST2600_I2CS_RX_DONE:
+ case AST2600_I2CS_WAIT_TX_DMA:
+ if (sts & AST2600_I2CS_SLAVE_MATCH)
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+
+ if (sts & AST2600_I2CS_RX_DONE) {
+ target_rx_len = AST2600_I2CC_GET_RX_BUF_LEN(readl(i2c_bus->reg_base +
+ AST2600_I2CC_BUFF_CTRL));
+ for (i = 0; i < target_rx_len; i++) {
+ value = readb(i2c_bus->buf_base + 0x10 + i);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &value);
+ }
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_REQUESTED, &value);
+ } else {
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_PROCESSED, &value);
+ }
+ writeb(value, i2c_bus->buf_base);
+ writel(AST2600_I2CC_SET_TX_BUF_LEN(1),
+ i2c_bus->reg_base + AST2600_I2CC_BUFF_CTRL);
+ cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_TX_BUFF_EN;
+ break;
+ /* workaround : trigger the cmd twice to fix next state keep 1000000 */
+ case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE:
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+ cmd = TARGET_TRIGGER_CMD | AST2600_I2CS_RX_BUFF_EN;
+ writel(cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+ break;
+ case AST2600_I2CS_TX_NAK | AST2600_I2CS_STOP:
+ case AST2600_I2CS_STOP:
+ cmd = TARGET_TRIGGER_CMD;
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ break;
+ default:
+ dev_dbg(i2c_bus->dev, "unhandled target isr case %x, sts %x\n", sts,
+ readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF));
+ break;
+ }
+
+ if (cmd)
+ writel(cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+ writel(AST2600_I2CS_PKT_DONE, i2c_bus->reg_base + AST2600_I2CS_ISR);
+ readl(i2c_bus->reg_base + AST2600_I2CS_ISR);
+
+ if ((sts & AST2600_I2CS_STOP) && !(sts & AST2600_I2CS_SLAVE_PENDING))
+ WRITE_ONCE(i2c_bus->target_active, false);
+}
+
+static void ast2600_i2c_target_byte_irq(struct ast2600_i2c_bus *i2c_bus, u32 sts)
+{
+ u32 i2c_buff = readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF);
+ u32 cmd = AST2600_I2CS_ACTIVE_ALL;
+ u8 byte_data;
+ u8 value;
+
+ /* Handle i2c target timeout condition */
+ if (sts & AST2600_I2CS_INACTIVE_TO) {
+ /* Reset timeout counter */
+ u32 ac_timing = readl(i2c_bus->reg_base + AST2600_I2CC_AC_TIMING) &
+ AST2600_I2CC_AC_TIMING_MASK;
+
+ writel(ac_timing, i2c_bus->reg_base + AST2600_I2CC_AC_TIMING);
+ ac_timing |= AST2600_I2CC_TTIMEOUT(i2c_bus->timeout);
+ writel(ac_timing, i2c_bus->reg_base + AST2600_I2CC_AC_TIMING);
+ writel(AST2600_I2CS_ACTIVE_ALL, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+ writel(sts, i2c_bus->reg_base + AST2600_I2CS_ISR);
+ readl(i2c_bus->reg_base + AST2600_I2CS_ISR);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ WRITE_ONCE(i2c_bus->target_active, false);
+ return;
+ }
+
+ switch (sts) {
+ case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_RX_DMA:
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_REQUESTED, &value);
+ /* first address match is address */
+ byte_data = AST2600_I2CC_GET_RX_BUFF(i2c_buff);
+ break;
+ case AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_RX_DMA:
+ byte_data = AST2600_I2CC_GET_RX_BUFF(i2c_buff);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_WRITE_RECEIVED, &byte_data);
+ break;
+ case AST2600_I2CS_SLAVE_MATCH | AST2600_I2CS_RX_DONE | AST2600_I2CS_WAIT_TX_DMA:
+ cmd |= AST2600_I2CS_TX_CMD;
+ byte_data = AST2600_I2CC_GET_RX_BUFF(i2c_buff);
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_REQUESTED, &byte_data);
+ writel(byte_data, i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF);
+ break;
+ case AST2600_I2CS_TX_ACK | AST2600_I2CS_WAIT_TX_DMA:
+ cmd |= AST2600_I2CS_TX_CMD;
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_READ_PROCESSED, &byte_data);
+ writel(byte_data, i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF);
+ break;
+ case AST2600_I2CS_STOP:
+ case AST2600_I2CS_STOP | AST2600_I2CS_TX_NAK:
+ i2c_slave_event(i2c_bus->target, I2C_SLAVE_STOP, &value);
+ break;
+ default:
+ dev_dbg(i2c_bus->dev, "unhandled pkt isr %x\n", sts);
+ break;
+ }
+ writel(cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+ writel(sts, i2c_bus->reg_base + AST2600_I2CS_ISR);
+ readl(i2c_bus->reg_base + AST2600_I2CS_ISR);
+}
+
+static int ast2600_i2c_target_irq(struct ast2600_i2c_bus *i2c_bus)
+{
+ u32 ier = readl(i2c_bus->reg_base + AST2600_I2CS_IER);
+ u32 isr = readl(i2c_bus->reg_base + AST2600_I2CS_ISR);
+
+ if (!(isr & ier))
+ return 0;
+
+ /*
+ * Target interrupt coming after controller packet done
+ * So need handle controller first.
+ */
+ if (readl(i2c_bus->reg_base + AST2600_I2CM_ISR) & AST2600_I2CM_PKT_DONE)
+ return 0;
+
+ isr &= ~(AST2600_I2CS_ADDR_INDICATE_MASK);
+
+ if (AST2600_I2CS_ADDR1_NAK & isr)
+ isr &= ~AST2600_I2CS_ADDR1_NAK;
+
+ if (AST2600_I2CS_ADDR2_NAK & isr)
+ isr &= ~AST2600_I2CS_ADDR2_NAK;
+
+ if (AST2600_I2CS_ADDR3_NAK & isr)
+ isr &= ~AST2600_I2CS_ADDR3_NAK;
+
+ if (AST2600_I2CS_ADDR_MASK & isr)
+ isr &= ~AST2600_I2CS_ADDR_MASK;
+
+ if (AST2600_I2CS_PKT_DONE & isr) {
+ if (i2c_bus->mode == DMA_MODE)
+ ast2600_i2c_target_packet_dma_irq(i2c_bus, isr);
+ else
+ ast2600_i2c_target_packet_buff_irq(i2c_bus, isr);
+ } else {
+ ast2600_i2c_target_byte_irq(i2c_bus, isr);
+ }
+
+ return 1;
+}
+#endif
+
static int ast2600_i2c_setup_dma_tx(u32 cmd, struct ast2600_i2c_bus *i2c_bus)
{
struct i2c_msg *msg = &i2c_bus->msgs[i2c_bus->msgs_index];
@@ -629,6 +1070,20 @@ static void ast2600_i2c_controller_packet_irq(struct ast2600_i2c_bus *i2c_bus, u
}
break;
case AST2600_I2CM_RX_DONE:
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ /*
+ * Workaround for controller/target packet mode enable rx done stuck issue
+ * When controller go for first read (RX_DONE), target mode will also effect
+ * Then controller will send nack, not operate anymore.
+ */
+ if (readl(i2c_bus->reg_base + AST2600_I2CS_CMD_STS) & AST2600_I2CS_PKT_MODE_EN) {
+ u32 target_cmd = readl(i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+
+ writel(0, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+ writel(target_cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+ }
+ fallthrough;
+#endif
case AST2600_I2CM_RX_DONE | AST2600_I2CM_NORMAL_STOP:
/* do next rx */
if (i2c_bus->mode == DMA_MODE) {
@@ -727,6 +1182,12 @@ static irqreturn_t ast2600_i2c_bus_irq(int irq, void *dev_id)
{
struct ast2600_i2c_bus *i2c_bus = dev_id;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ if (i2c_bus->target) {
+ if (ast2600_i2c_target_irq(i2c_bus))
+ return IRQ_HANDLED;
+ }
+#endif
return IRQ_RETVAL(ast2600_i2c_controller_irq(i2c_bus));
}
@@ -743,12 +1204,35 @@ static int ast2600_i2c_controller_xfer(struct i2c_adapter *adap, struct i2c_msg
return ret;
}
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ if (i2c_bus->mode == BUFF_MODE) {
+ if (i2c_bus->target_active)
+ return -EBUSY;
+ /**
+ * In BUFF_MODE, controller and target share the same buffer register,
+ * A target transaction can update buffer state asynchronously via IRQ,
+ * so block controller transfers while target is active, otherwise we can
+ * corrupt buffer.
+ */
+ writel(0, i2c_bus->reg_base + AST2600_I2CS_IER);
+ if (readl(i2c_bus->reg_base + AST2600_I2CS_ISR) || i2c_bus->target_active) {
+ writel(AST2600_I2CS_PKT_DONE, i2c_bus->reg_base + AST2600_I2CS_IER);
+ return -EBUSY;
+ }
+ }
+#endif
+
i2c_bus->cmd_err = 0;
i2c_bus->msgs = msgs;
i2c_bus->msgs_index = 0;
i2c_bus->msgs_count = num;
reinit_completion(&i2c_bus->cmd_complete);
ret = ast2600_i2c_do_start(i2c_bus);
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ /* avoid race condition target is wait and controller wait 1st target operate */
+ if (i2c_bus->mode == BUFF_MODE)
+ writel(AST2600_I2CS_PKT_DONE, i2c_bus->reg_base + AST2600_I2CS_IER);
+#endif
if (ret)
goto controller_out;
timeout = wait_for_completion_timeout(&i2c_bus->cmd_complete, i2c_bus->adap.timeout);
@@ -767,6 +1251,9 @@ static int ast2600_i2c_controller_xfer(struct i2c_adapter *adap, struct i2c_msg
* if the bus is still busy.
*/
if (i2c_bus->multi_master &&
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ !i2c_bus->target_active &&
+#endif
(readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF) &
AST2600_I2CC_BUS_BUSY_STS))
ast2600_i2c_recover_bus(i2c_bus);
@@ -814,8 +1301,80 @@ static int ast2600_i2c_init(struct ast2600_i2c_bus *i2c_bus)
/* Clear Interrupt */
writel(GENMASK(27, 0), i2c_bus->reg_base + AST2600_I2CM_ISR);
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ /* for memory buffer initial */
+ if (i2c_bus->dma_available) {
+ i2c_bus->target_dma_buf =
+ dmam_alloc_coherent(i2c_bus->dev, I2C_TARGET_MSG_BUF_SIZE,
+ &i2c_bus->target_dma_addr, GFP_KERNEL);
+ if (!i2c_bus->target_dma_buf)
+ return -ENOMEM;
+ }
+
+ writel(GENMASK(27, 0), i2c_bus->reg_base + AST2600_I2CS_ISR);
+
+ if (i2c_bus->mode == BYTE_MODE)
+ writel(GENMASK(15, 0), i2c_bus->reg_base + AST2600_I2CS_IER);
+ else
+ writel(AST2600_I2CS_PKT_DONE, i2c_bus->reg_base + AST2600_I2CS_IER);
+#endif
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static int ast2600_i2c_reg_target(struct i2c_client *client)
+{
+ struct ast2600_i2c_bus *i2c_bus = i2c_get_adapdata(client->adapter);
+ u32 cmd = TARGET_TRIGGER_CMD;
+
+ if (i2c_bus->target)
+ return -EINVAL;
+
+ dev_dbg(i2c_bus->dev, "target addr %x\n", client->addr);
+
+ writel(0, i2c_bus->reg_base + AST2600_I2CS_ADDR_CTRL);
+ writel(AST2600_I2CC_SLAVE_EN | readl(i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL),
+ i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+
+ /* trigger rx buffer */
+ if (i2c_bus->mode == DMA_MODE) {
+ cmd |= AST2600_I2CS_RX_DMA_EN;
+ writel(i2c_bus->target_dma_addr, i2c_bus->reg_base + AST2600_I2CS_RX_DMA);
+ writel(i2c_bus->target_dma_addr, i2c_bus->reg_base + AST2600_I2CS_TX_DMA);
+ writel(AST2600_I2CS_SET_RX_DMA_LEN(I2C_TARGET_MSG_BUF_SIZE),
+ i2c_bus->reg_base + AST2600_I2CS_DMA_LEN);
+ } else if (i2c_bus->mode == BUFF_MODE) {
+ cmd = TARGET_TRIGGER_CMD;
+ } else {
+ cmd &= ~AST2600_I2CS_PKT_MODE_EN;
+ }
+
+ writel(cmd, i2c_bus->reg_base + AST2600_I2CS_CMD_STS);
+ i2c_bus->target = client;
+ /* Set target addr. */
+ writel(client->addr | AST2600_I2CS_ADDR1_ENABLE,
+ i2c_bus->reg_base + AST2600_I2CS_ADDR_CTRL);
+
+ return 0;
+}
+
+static int ast2600_i2c_unreg_target(struct i2c_client *client)
+{
+ struct ast2600_i2c_bus *i2c_bus = i2c_get_adapdata(client->adapter);
+ u32 val;
+
+ /* Turn off target mode. */
+ val = readl(i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+ writel(val & ~AST2600_I2CC_SLAVE_EN, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
+ val = readl(i2c_bus->reg_base + AST2600_I2CS_ADDR_CTRL);
+ writel(val & ~AST2600_I2CS_ADDR1_MASK, i2c_bus->reg_base + AST2600_I2CS_ADDR_CTRL);
+
+ i2c_bus->target = NULL;
+
return 0;
}
+#endif
static u32 ast2600_i2c_functionality(struct i2c_adapter *adap)
{
@@ -825,6 +1384,10 @@ static u32 ast2600_i2c_functionality(struct i2c_adapter *adap)
static const struct i2c_algorithm i2c_ast2600_algorithm = {
.xfer = ast2600_i2c_controller_xfer,
.functionality = ast2600_i2c_functionality,
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ .reg_target = ast2600_i2c_reg_target,
+ .unreg_target = ast2600_i2c_unreg_target,
+#endif
};
static void ast2600_i2c_set_xfer_mode(struct ast2600_i2c_bus *i2c_bus,
@@ -960,6 +1523,9 @@ static int ast2600_i2c_probe(struct platform_device *pdev)
regmap_write(i2c_bus->global_regs, AST2600_I2CG_CLK_DIV_CTRL, I2CCG_DIV_CTRL);
}
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+ WRITE_ONCE(i2c_bus->target_active, false);
+#endif
i2c_bus->dev = dev;
i2c_bus->multi_master = device_property_read_bool(dev, "multi-master");
i2c_bus->dma_available = device_property_read_bool(dev, "aspeed,enable-dma");
--
2.34.1
^ permalink raw reply related
* [PATCH v28 1/4] dt-bindings: i2c: Split AST2600 binding into a new YAML
From: Ryan Chen @ 2026-03-30 8:21 UTC (permalink / raw)
To: jk, andriy.shevchenko, Andi Shyti, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery,
Benjamin Herrenschmidt, Rayn Chen, Philipp Zabel
Cc: linux-i2c, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, openbmc, Ryan Chen
In-Reply-To: <20260330-upstream_i2c-v28-0-17bdae39c5cb@aspeedtech.com>
The AST2600 I2C controller introduces a completely new register layout
with separate controller and target register blocks, unlike the mixed
register layout used by AST2400/AST2500.
Move AST2600 I2C binding from aspeed,i2c.yaml to a dedicated
aspeed,ast2600-i2c.yaml schema.
Besides the split, this also adjusts for AST2600-specific requirements.
- require two reg regions (controller register block + buffer block)
- use clock-frequency for bus speed description
- interrupts are required on AST2600
- use correct DTS coding style in example
No compatible strings are changed.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
Changes in v26:
- commit message: include details of changes from original binding
- fix example property ordering to follow DTS coding style
- use consistent "AST2600" naming
---
.../bindings/i2c/aspeed,ast2600-i2c.yaml | 62 ++++++++++++++++++++++
.../devicetree/bindings/i2c/aspeed,i2c.yaml | 3 +-
2 files changed, 63 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml
new file mode 100644
index 000000000000..de2c359037da
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/aspeed,ast2600-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED I2C on the AST2600 SoCs
+
+maintainers:
+ - Ryan Chen <ryan_chen@aspeedtech.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2600-i2c-bus
+
+ reg:
+ items:
+ - description: controller registers
+ - description: controller buffer space
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-frequency:
+ description: Desired operating frequency of the I2C bus in Hz.
+ minimum: 500
+ maximum: 4000000
+ default: 100000
+
+ resets:
+ maxItems: 1
+
+required:
+ - reg
+ - compatible
+ - clocks
+ - resets
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c@80 {
+ compatible = "aspeed,ast2600-i2c-bus";
+ reg = <0x80 0x80>, <0xc00 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
+ clock-frequency = <100000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
index 5b9bd2feda3b..d4e4f412feba 100644
--- a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs
+title: ASPEED I2C on the AST24XX, AST25XX SoCs
maintainers:
- Rayn Chen <rayn_chen@aspeedtech.com>
@@ -17,7 +17,6 @@ properties:
enum:
- aspeed,ast2400-i2c-bus
- aspeed,ast2500-i2c-bus
- - aspeed,ast2600-i2c-bus
reg:
minItems: 1
--
2.34.1
^ permalink raw reply related
* [PATCH v28 2/4] dt-bindings: i2c: ast2600-i2c.yaml: Add global-regs and enable-dma properties
From: Ryan Chen @ 2026-03-30 8:21 UTC (permalink / raw)
To: jk, andriy.shevchenko, Andi Shyti, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery,
Benjamin Herrenschmidt, Rayn Chen, Philipp Zabel
Cc: linux-i2c, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, openbmc, Ryan Chen
In-Reply-To: <20260330-upstream_i2c-v28-0-17bdae39c5cb@aspeedtech.com>
Add aspeed,enable-dma boolean property to indicate that DMA is
available for transfers on this I2C bus.
Also add the aspeed,global-regs phandle to reference the AST2600
global registers syscon node, containing the SoC-common I2C register
set.
These properties apply only to the AST2600 binding. Legacy DTs remain
unchanged.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
Changes in v28:
- update commit message correspond with aspeed,enable-dma.
- remove aspeed,transfer-mode and add aspeed,enable-dma property and
description.
- Fix aspeed,enable-dma description to reflect hardware capability rather
than software behavior
Changes in v27:
- change aspeed,transfer-mode to aspeed,enable-dma.
---
.../devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml
index de2c359037da..67b23d1a4cec 100644
--- a/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/aspeed,ast2600-i2c.yaml
@@ -37,6 +37,16 @@ properties:
resets:
maxItems: 1
+ aspeed,enable-dma:
+ type: boolean
+ description: Indicates this I2C controller instance has DMA capability.
+
+ aspeed,global-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle reference to the i2c global syscon node, containing the
+ SoC-common i2c register set.
+
required:
- reg
- compatible
@@ -59,4 +69,6 @@ examples:
resets = <&syscon ASPEED_RESET_I2C>;
clock-frequency = <100000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ aspeed,global-regs = <&i2c_global>;
+ aspeed,enable-dma;
};
--
2.34.1
^ permalink raw reply related
* [PATCH v28 0/4] Add ASPEED AST2600 I2C controller driver
From: Ryan Chen @ 2026-03-30 8:21 UTC (permalink / raw)
To: jk, andriy.shevchenko, Andi Shyti, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Joel Stanley, Andrew Jeffery,
Benjamin Herrenschmidt, Rayn Chen, Philipp Zabel
Cc: linux-i2c, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, openbmc, Ryan Chen
This series adds support for the AST2600 I2C controller “new register
set” implementation.
The AST2600 I2C controller introduces a revised register layout which
separates controller and target functionality into distinct register
blocks, and extends clock divider configuration, packet-based transfer
support, and DMA capabilities compared to the legacy mixed register
layout used on earlier ASPEED SoCs.
The current driver implementation for the AST2600 I2C peripheral is
through the hardware's "compatibility mode", which exposes a register
set that matches the previous generation hardware (AST2500 and earlier).
Instead, add a driver that works in new-register-set mode, to allow the
new features, and will provide support for future hardware that will
not implement compatibility mode.
In order to support the new mode, we need a couple of DT binding changes
to reflect the expanded hardware interfaces: references to a global
register set, and buffer mode selection. Since the binding still
represents the same (AST2600 SoC) physical hardware, we continue to use
the existing compatible string of "aspeed,ast2600-i2c-bus".
However: since we're changing semantics for an existing binding, we
allow backwards compatibility by selecting on presence/absence of the
newly-added properties, and fall back to the old driver (ie., in
compatibility mode) when we detect a DT using the old binding spec.
Specifically:
- ast2600-i2c-bus nodes that provide the `aspeed,global-regs` property
(which is mandatory in the new binding and absent in the legacy
binding) will be successfully probed by the new driver
- ast2600-i2c-bus nodes without `aspeed,global-regs` continue to use the
existing driver (in legacy register mode), ensuring that platforms
with the current DTBs remain functional
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
Changes in v28:
- 2/4: update commit message correspond with aspeed,enable-dma.
- 2/4: remove aspeed,transfer-mode and add aspeed,enable-dma property
and description.
- 2/4: Fix aspeed,enable-dma description to reflect hardware capability
rather than software behavior.
- 3/4: Separate xfer_mode_store into distinct parse and availability-check
steps by introducing ast2600_i2c_xfer_mode_check().
- 3/4: fix tx dma memcpy source point address.
- 3/4: Use a temporary variable for devm_platform_get_and_ioremap_resource()
to avoid storing an ERR_PTR in i2c_bus->buf_base; drop the redundant
NULL assignment in the error path since i2c_bus is kzalloc()ed.
- 3/4: Add ABI documentation file
Documentation/ABI/testing/sysfs-driver-ast2600-i2c.
- 4/4: fix typo condication -> condition.
- 4/4: fix compile error, when disable CONFIG_I2C_SLAVE.
- Link to v27: https://lore.kernel.org/r/20260324-upstream_i2c-v27-0-f19b511c8c28@aspeedtech.com
Changes in v27:
- 1/4 use aspeed,enable-dma instead aspeed,transfer-mode.
- 2/4 remove aspeed,transfer-mode selection instad aspeed,transfer-mode
- 2/4 add sysfs for xfer mode.
- Link to v26: https://lore.kernel.org/r/20260309-upstream_i2c-v26-0-5fedcff8ffe8@aspeedtech.com
Changes in v26:
- 1/4: binding reworks based on review feedback
- Link to v25: https://lore.kernel.org/r/20260225-upstream_i2c-v25-0-9f4bdd954f3f@aspeedtech.com
Changes in v25:
- Use b4 to send series.
- Rebase on v7.0-rc1.
- Clarify cover letter and commit logs based on review feedback.
- Remove the i2c-aspeed-core multiplexer infrastructure and
implement driver selection via conditional -ENODEV handling
in individual probe() functions.
- 3/4: incorporate review feedback and refactor new driver
- Link to v24: https://lore.kernel.org/r/20251118014034.820988-1-ryan_chen@aspeedtech.com
Changes in v24:
- aspeed,ast2600-i2c.yaml
- fix make dt_binding_check blank warning.
- Link to v23: https://lore.kernel.org/all/20251117025040.3622984-1-ryan_chen@aspeedtech.com/
Changes in v23:
- update typo patch (1/4) commit message.
- aspeed,ast2600-i2c.yaml
- update reg and description.
- i2c-ast2600.c controller
- replace ast2600_select_i2c_clock to ast2600_i2c_ac_timing_config.
- i2c-ast2600.c target
- I2C_TARGET_MSG_BUF_SIZE 256 to 4096
- remove blank line.
- refine Master comment description to controller
- Link to v22: https://lore.kernel.org/all/20251112085649.1903631-1-ryan_chen@aspeedtech.com/
Changes in v22:
- update patch (1/4) commit message add dts example reason.
- aspeed,ast2600-i2c.yaml @patch (1/4)
- rename ast2600-i2c.yaml to aspeed,ast2600-i2c.yaml.
- update reg, clock-frequency description.
- aspeed,ast2600-i2c.yaml @patch (2/4)
- aspeed,transfer-mode, aspeed,transfer-mode add for ast2600.
- i2c-aspeed-core.c,h @patch (3/4)
- add i2c-aspeed-core allow both old and new device trees using the
same compatible string "aspeed,ast2600-i2c-bus".
- Link to v21: https://lore.kernel.org/all/20251027061240.3427875-1-ryan_chen@aspeedtech.com/
Changes in v21:
- update patch (1/4) commit message
- i2c-ast2600.c
- move rst to local variable in ast2600_i2c_probe().
- Link to v20: https://lore.kernel.org/all/20251021013548.2375190-1-ryan_chen@aspeedtech.com/
Changes in v20:
- ast2600-i2c.yaml
- fix warning at make dt_binding_check.
- Link to v19: https://lore.kernel.org/all/20251020013200.1858325-1-ryan_chen@aspeedtech.com/
Changes in v19:
- Split AST2600 binding into its own YAML file
- Removed `aspeed,ast2600-i2c-bus` from `aspeed,i2c.yaml`
- Added `aspeed,global-regs` and `aspeed,transfer-mode` to AST2600 binding
- Link to v18: https://lore.kernel.org/all/20250820051832.3605405-1-ryan_chen@aspeedtech.com/
Changes in v18:
- refine patch (1/3) commit message (reason for commit not list.)
- i2c-ast2600.c
- remove redundant reset_control_deassert in driver probe.
- remove reset_control_assert(i2c_bus->rst) in driver remove.
- Link to v17: https://lore.kernel.org/all/20250814084156.1650432-1-ryan_chen@aspeedtech.com/
Changes in v17:
- move i2c new mode register and feature into driver commit message.
- aspeed,i2c.yaml
- remove multi-master properties.
- use aspeed,transfer-mode properties for aspeed,enable-byte/enable-dma.
-i2c-ast2600.c
- rename dma_safe_buf to controller_dma_safe_buf.
- fix ast2600_i2c_recover_bus return overflow warnings.
- add ast2600_i2c_target_packet_buff_irq unhandle case.
- add parameter "cmd" in ast2600_i2c_setup_dma_rx,
ast2600_i2c_setup_buff_rx, ast2600_i2c_setup_byte_rx
- use reset_control_deassert replace
devm_reset_control_get_shared_deasserted.
- useaspeed,transfer-mode properties for transfer mode setting.
- change compatible = "aspeed,ast2600-i2cv2" to "aspeed,ast2600-i2c-bus".
- Link to v16: https://lore.kernel.org/all/20250224055936.1804279-1-ryan_chen@aspeedtech.com/
Changes in v16:
- aspeed,i2c.yaml: add aspeed,enable-byte properties for force byte mode.
- i2c-ast2600.c
- change include asm/unaligned.h to linux/unaligned.h.
- add reset timeout councter when slave active timeout.
- modify issue i2c_recovery_bus before slave re-enable.
- add aspeed,enable-byte properties.
- Link to v15: https://lore.kernel.org/all/20241007035235.2254138-1-ryan_chen@aspeedtech.com/
Changes in v15:
- i2c-ast2600.c
- add include unaligned.h
- rename all master -> controller, slave -> target.
- keep multi-master to align property.
- remove no used element in ast2600_i2c_bus.
- Link to v14: https://lore.kernel.org/all/20241002070213.1165263-1-ryan_chen@aspeedtech.com/
Changes in v14:
- aspeed,i2c.yaml
- v13 change people reviewed-by tag, v14 fixed to original people tag,
modify to Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- struct ast2600_i2c_bus layout optimal.
- ast2600_select_i2c_clock refine.
- ast2600_i2c_recover_bus overridden fix.
- dma_mapping_error() returned error code shadowed modify.
- buffer register in a 4-byte aligned simplified
- remove smbus alert
- Link to v13: https://lore.kernel.org/all/20240819092850.1590758-1-ryan_chen@aspeedtech.com/
Changes in v13:
- separate i2c master and slave driver to be two patchs.
- modify include header list, add bits.h include. remove of*.h
- modify (((x) >> 24) & GENMASK(5, 0)) to (((x) & GENMASK(29, 24)) >> 24)
- modify ast2600_select_i2c_clock function implement.
- modify ast2600_i2c_recover_bus function u32 claim to
u32 state = readl(i2c_bus->reg_base + AST2600_I2CC_STS_AND_BUFF);
- Link to v12: https://lore.kernel.org/all/20230714074522.23827-1-ryan_chen@aspeedtech.com/
Changes in v12:
- aspeed,i2c.yaml
- add Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- i2c-ast2600.c
- update include by alphabetical order
- make just a one TAB and put the last two lines on the single one
- remove no used timing_table structre
- remove enum explicit assinment
- rewritten to avoid this and using loop in ast2600_select_i2c_clock
- use GENMASK for most 0xffff
- remove too many parentheses
- use str_read_write replace read write string
- remove redundant blank line after ast2600_i2c_bus_of_table
- fix wrong multi-line style of the comment
- use macro for i2c standard speeds
- remove useless noise dev_info
- Link to v11: https://lore.kernel.org/all/20230430041712.3247998-1-ryan_chen@aspeedtech.com/
Changes in v11:
- aspeed,i2c.yaml
- no change, the same with v10.
- i2c-ast2600.c
- modify alert_enable from int -> boolean.
- modify dbg string recovery -> recover.
- remove no need to init 0.
- remove new line after break.
- remove unneeded empty line.
- modify dma_alloc_coherent to dmam_alloc_coherent
- modify probe nomem return dev_err_probe
- modify i2c_add_adapter to devm_i2c_adapter
- modify checkpatch: Alignment should match open parenthesis
- modify checkpatch: braces {} should be used on all arms of this statement
- modify checkpatch: Unbalanced braces around else statement
- Link to v10: https://lore.kernel.org/all/20230415012848.1777768-1-ryan_chen@aspeedtech.com/
Changes in v10:
- aspeed,i2c.yaml
- move unevaluatedProperties after allOf.
- remove extra one blank line.
- i2c-ast2600.c
- no change, the same with v8.
- Link to v9: https://lore.kernel.org/all/20230405022825.333246-1-ryan_chen@aspeedtech.com/
Changes in v9:
- aspeed,i2c.yaml
- backoff to v7.
- no fix typo in maintainer's name and email. this would be another patch.
- no remove address-cells, size-cells, this would be another patch.
- use aspeed,enable-dma property instead of aspeed,xfer-mode selection.
- fix allOf and else false properties for aspeed,ast2600-i2cv2.
- i2c-ast2600.c
- no change, the same with v8
- Link to v8: https://lore.kernel.org/all/20230330073259.485606-1-ryan_chen@aspeedtech.com/
Changes in v8:
- aspeed,i2c.yaml
- modify commit message.
- Fix typo in maintainer's name and email.
- remove address-cells, size-cells.
- i2c-ast2600.c
- move "i2c timeout counter" comment description before property_read.
- remove redundant code "return ret" in probe end.
- Link to v7: https://lore.kernel.org/all/20230327092524.3916389-1-ryan_chen@aspeedtech.com/
Changes in v7:
- aspeed,i2c.yaml
- Update ASPEED I2C maintainers email.
- use aspeed,enable-dma property instead of aspeed,xfer-mode selection.
- fix allOf and else false properties for aspeed,ast2600-i2cv2.
- i2c-ast2600.c
- remove aspeed,xfer-mode instead of aspeed,enable-dma mode. buffer mode
is default.
- remove aspeed,timeout instead of i2c-scl-clk-low-timeout-us for
timeout setting.
- Link to v6: https://lore.kernel.org/all/20230226031321.3126756-1-ryan_chen@aspeedtech.com/
Changes in v6:
- remove aspeed,i2cv2.yaml, merge to aspeed,i2c.yaml -add support for
i2cv2 properites.
- i2c-ast2600.c
- fix ast2600_i2c_remove ordering.
- remove ast2600_i2c_probe goto labels, and add dev_err_probe -remove
redundant deb_dbg debug message.
- rename gr_regmap -> global_regs
- Link to v5: https://lore.kernel.org/all/20230220061745.1973981-1-ryan_chen@aspeedtech.com/
Changes in v5:
- remove ast2600-i2c-global.yaml, i2c-ast2600-global.c.
- i2c-ast2600.c
- remove legacy clock divide, all go for new clock divide.
- remove duplicated read isr.
- remove no used driver match
- fix probe return for each labels return.
- global use mfd driver, driver use phandle to regmap read/write.
- rename aspeed,i2c-ast2600.yaml to aspeed,i2cv2.yaml -remove bus-frequency.
- add required aspeed,gr
- add timeout, byte-mode, buff-mode properites.
- Link to v4: https://lore.kernel.org/all/20230201103359.1742140-1-ryan_chen@aspeedtech.com/
Changes in v4:
- fix i2c-ast2600.c driver buffer mode use single buffer conflit in
master slave mode both enable.
- fix kmemleak issue when use dma mode.
- fix typo aspeed,i2c-ast2600.yaml compatible is "aspeed,ast2600-i2c"
- fix typo aspeed,i2c-ast2600.ymal to aspeed,i2c-ast2600.yaml
- Link to v3: https://lore.kernel.org/all/20220516064900.30517-1-ryan_chen@aspeedtech.com/
Changes in v3:
- fix i2c global clock divide default value.
- remove i2c slave no used dev_dbg info.
- Link to v2: https://lore.kernel.org/all/20220413101735.27678-1-ryan_chen@aspeedtech.com/
Changes in v2:
- add i2c global ymal file commit.
- rename file name from new to ast2600.
aspeed-i2c-new-global.c -> i2c-ast2600-global.c
aspeed-i2c-new-global.h -> i2c-ast2600-global.h
i2c-new-aspeed.c -> i2c-ast2600.c
- rename all driver function name to ast2600.
- Link to v1: https://lore.kernel.org/all/20220323004009.943298-1-ryan_chen@aspeedtech.com/
---
Ryan Chen (4):
dt-bindings: i2c: Split AST2600 binding into a new YAML
dt-bindings: i2c: ast2600-i2c.yaml: Add global-regs and enable-dma properties
i2c: ast2600: Add controller driver for AST2600 new register set
i2c: ast2600: Add target mode support
Documentation/ABI/testing/sysfs-driver-ast2600-i2c | 19 +
.../bindings/i2c/aspeed,ast2600-i2c.yaml | 74 +
.../devicetree/bindings/i2c/aspeed,i2c.yaml | 3 +-
drivers/i2c/busses/Makefile | 2 +-
drivers/i2c/busses/i2c-aspeed.c | 5 +
drivers/i2c/busses/i2c-ast2600.c | 1646 ++++++++++++++++++++
6 files changed, 1746 insertions(+), 3 deletions(-)
---
base-commit: 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f
change-id: 20260223-upstream_i2c-ebd07f89739c
Best regards,
--
Ryan Chen <ryan_chen@aspeedtech.com>
^ permalink raw reply
* [PATCH] net: lpc_eth: Fix a possible memory leak in lpc_mii_probe()
From: Ma Ke @ 2026-03-30 8:16 UTC (permalink / raw)
To: vz, piotr.wojtaszczyk, andrew+netdev, davem, edumazet, kuba,
pabeni, alexandre.belloni
Cc: linux-arm-kernel, netdev, linux-kernel, Ma Ke, stable
lpc_mii_probe() calls of_phy_find_device() to obtain a phy_device
pointer. of_phy_find_device() increments the refcount of the device.
The current implementation does not decrement the refcount after using
the pointer, which leads to a memory leak.
Add phy_device_free() to balance the refcount.
Found by code review.
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Cc: stable@vger.kernel.org
Fixes: 3503bf024b3e ("net: lpc_eth: parse phy nodes from device tree")
---
drivers/net/ethernet/nxp/lpc_eth.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 8b9a3e3bba30..8ce7c9bb6dd6 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -751,7 +751,7 @@ static void lpc_handle_link_change(struct net_device *ndev)
static int lpc_mii_probe(struct net_device *ndev)
{
struct netdata_local *pldat = netdev_priv(ndev);
- struct phy_device *phydev;
+ struct phy_device *phydev, *phydev_tmp;
/* Attach to the PHY */
if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII)
@@ -760,17 +760,18 @@ static int lpc_mii_probe(struct net_device *ndev)
netdev_info(ndev, "using RMII interface\n");
if (pldat->phy_node)
- phydev = of_phy_find_device(pldat->phy_node);
+ phydev_tmp = of_phy_find_device(pldat->phy_node);
else
- phydev = phy_find_first(pldat->mii_bus);
- if (!phydev) {
+ phydev_tmp = phy_find_first(pldat->mii_bus);
+ if (!phydev_tmp) {
netdev_err(ndev, "no PHY found\n");
return -ENODEV;
}
- phydev = phy_connect(ndev, phydev_name(phydev),
+ phydev = phy_connect(ndev, phydev_name(phydev_tmp),
&lpc_handle_link_change,
lpc_phy_interface_mode(&pldat->pdev->dev));
+ phy_device_free(phydev_tmp);
if (IS_ERR(phydev)) {
netdev_err(ndev, "Could not attach to PHY\n");
return PTR_ERR(phydev);
--
2.43.0
^ permalink raw reply related
* Re: [PATCH v1 1/1] arm64: dts: imx91-var-dart-sonata: add RGB select supply for PCA6408
From: Stefano Radaelli @ 2026-03-30 8:15 UTC (permalink / raw)
To: Frank Li
Cc: linux-kernel, devicetree, imx, linux-arm-kernel, pierluigi.p,
Stefano Radaelli, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
In-Reply-To: <acbPUTPpGIJoqTn3@lizhi-Precision-Tower-5810>
Hi Frank,
On Fri, Mar 27, 2026 at 02:41:21PM -0400, Frank Li wrote:
>
> Accroding to signal name, it is MUX chip select signal. Of couse it may
> connect to a buffer's EN pin. I have not checked your schematic.
>
> If it connect to MUX chip or some select signal, it should use above method,
> even though it is permanently asserted when access PCA6408.
>
> If it connect to EN pin of buffer, regualtor should be good.
>
Yes, it is exactly the second case!
It's just an EN pin, that enables a buffer to route RGB signals used on
the DART-MX91 som only.
That's why I think regulator is the right way for this case.
Best Regards,
Stefano
^ permalink raw reply
* Re: [PATCH net-next 00/10] net: airoha: Support multiple net_devices connected to the same GDM port
From: Lorenzo Bianconi @ 2026-03-30 8:08 UTC (permalink / raw)
To: Jakub Kicinski
Cc: Andrew Lunn, David S. Miller, Eric Dumazet, Paolo Abeni,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Christian Marangi,
linux-arm-kernel, linux-mediatek, netdev, devicetree, Xuegang Lu
In-Reply-To: <20260329103653.7593cbb2@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 502 bytes --]
> On Sun, 29 Mar 2026 15:07:50 +0200 Lorenzo Bianconi wrote:
> > EN7581 or AN7583 SoCs support connecting multiple external SerDes (e.g.
> > Ethernet or USB SerDes) to GDM3 or GDM4 ports via a hw multiplexer that
> > manages the traffic in a TDM manner. As a result multiple net_devices can
> > connect to the same GDM{3,4} port and there is a theoretical "1:n"
> > relation between GDM ports and net_devices.
>
> Does not apply.
Hi Jakub,
ack, I will rebase in v2.
Regards,
Lorenzo
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply
* Re: [PATCH net-next 00/10] net: airoha: Support multiple net_devices connected to the same GDM port
From: Lorenzo Bianconi @ 2026-03-30 8:07 UTC (permalink / raw)
To: Benjamin Larsson
Cc: Andrew Lunn, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Christian Marangi, linux-arm-kernel, linux-mediatek, netdev,
devicetree, Xuegang Lu
In-Reply-To: <a64e0f7e-7073-4355-a3de-e8d93e2c795c@genexis.eu>
[-- Attachment #1: Type: text/plain, Size: 4580 bytes --]
> Hi.
Hi Ben,
>
> On 29/03/2026 15:07, Lorenzo Bianconi wrote:
> > EN7581 or AN7583 SoCs support connecting multiple external SerDes (e.g.
> > Ethernet or USB SerDes) to GDM3 or GDM4 ports via a hw multiplexer that
> > manages the traffic in a TDM manner.
>
> I think the word for this is arbiter. I think the common use of mux is as a
> more fixed data path selector.
ack, I will fix it in v2.
Regards,
Lorenzo
>
> > As a result multiple net_devices can
> > connect to the same GDM{3,4} port and there is a theoretical "1:n"
> > relation between GDM ports and net_devices.
> >
> > ┌─────────────────────────────────┐
> > │ │ ┌──────┐
> > │ P1 GDM1 ├────►MT7530│
> > │ │ └──────┘
> > │ │ ETH0 (DSA conduit)
> > │ │
> > │ PSE/FE │
> > │ │
> > │ │
> > │ │ ┌─────┐
> > │ P0 CDM1 ├────►QDMA0│
> > │ P4 P9 GDM4 │ └─────┘
> > └──┬─────────────────────────┬────┘
> > │ │
> > ┌──▼──┐ ┌────▼────┐
> > │ PPE │ │ MUX │
> > └─────┘ └─┬─────┬─┘
> > │ │
> > ┌──▼──┐┌─▼───┐
> > │ ETH ││ USB │
> > └─────┘└─────┘
> > ETH1 ETH2
>
> A more representative picture is like the following and in the GDM2 path
> there is a real mux present(not relevant for this patch series though). Thus
> I think it is important to have the distinction between mux and arbiter.
> (Feel free to reuse the following illustration freely).
>
> ┌─────────────────────────────────┐
> │ │ ┌──────┐
> ┌─────────┐ │ P1 GDM1 ├────►MT7530│
> │ MUX ├──│ P2 GDM2 │ └──────┘
> └─┬─────┬─┘ │ │ ETH0 (DSA conduit)
> │ │ │ │
> ┌──▼──┐┌─▼───┐│ PSE/FE │
> │ PON ││ PON ││ │
> └─────┘└─────┘│ │
> ETH5 XPON │ │ ┌─────┐
> │ P0 CDM1 ├────►QDMA0│
> │ P4 P3 GDM3 P9 GDM4 │ └─────┘
> └──┬──────────┬──────────────┬────┘
> │ │ │
> ┌──▼──┐ ┌────▼────┐ ┌────▼────┐
> │ PPE │ │ ARB │ │ ARB │
> └─────┘ └─┬─────┬─┘ └─┬─────┬─┘
> │ │ │ │
> ┌──▼──┐┌─▼───┐ ┌──▼──┐┌─▼───┐
> │PCIE0││PCIE1│ │ ETH ││ USB │
> └─────┘└─────┘ └─────┘└─────┘
> ETH3 ETH4 ETH1 ETH2
>
> MvH
> Benjamin Larsson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply
* Re: [PATCH] arm64: dts: rockchip: Add RK3562 serial aliases
From: Krzysztof Kozlowski @ 2026-03-30 8:04 UTC (permalink / raw)
To: 谢致邦 (XIE Zhibang)
Cc: conor+dt, devicetree, finley.xiao, heiko, kever.yang, krzk+dt,
linux-arm-kernel, linux-kernel, linux-rockchip, robh
In-Reply-To: <tencent_723DE3D68C7F44CF67ED583F558130B47208@qq.com>
On 30/03/2026 04:46, 谢致邦 (XIE Zhibang) wrote:
> On Sat, Mar 28, 2026 at 04:08:57PM +0100, Krzysztof Kozlowski wrote:
>> On 28/03/2026 14:05, 谢致邦 (XIE Zhibang) wrote:
>>> This fixes the stdout-path in rk3562-evb2-v10.dts.
>>>
>>> Fixes: ceb6ef1ea900 ("arm64: dts: rockchip: Add RK3562 evb2 devicetree")
>>> Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
>>> ---
>>> arch/arm64/boot/dts/rockchip/rk3562.dtsi | 10 ++++++++++
>>> 1 file changed, 10 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3562.dtsi b/arch/arm64/boot/dts/rockchip/rk3562.dtsi
>>> index e4816aa3dae0..14e74e8ac7df 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3562.dtsi
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3562.dtsi
>>> @@ -26,6 +26,16 @@ aliases {
>>> gpio2 = &gpio2;
>>> gpio3 = &gpio3;
>>> gpio4 = &gpio4;
>>> + serial0 = &uart0;
>>> + serial1 = &uart1;
>>> + serial2 = &uart2;
>>> + serial3 = &uart3;
>>> + serial4 = &uart4;
>>> + serial5 = &uart5;
>>> + serial6 = &uart6;
>>> + serial7 = &uart7;
>>> + serial8 = &uart8;
>>> + serial9 = &uart9;
>>
>> UART aliases are properties of the boards, not SoC.
>>
>> Best regards,
>> Krzysztof
>
> So are you saying that we need to remove the serial aliases from files
> like rk3308.dtsi, rk3328.dtsi, rk3368.dtsi, rk3399-base.dtsi,
> rk356x-base.dtsi, rk3576.dtsi, rk3588-base.dtsi, and so on?
Well, I tried once but people disagreed because of impact, so probably not.
Best regards,
Krzysztof
^ permalink raw reply
* Re: [PATCH v3 1/2] dt-bindings: thermal: st,thermal-spear1340: convert to dtschema
From: Daniel Lezcano @ 2026-03-30 8:02 UTC (permalink / raw)
To: Gopi Krishna Menon, rafael, daniel.lezcano, rui.zhang,
lukasz.luba, robh, krzk+dt, vireshk, conor+dt
Cc: linux-pm, devicetree, linux-kernel, linux-arm-kernel, soc,
daniel.baluta, simona.toaca, d-gole, m-chawdhry,
Krzysztof Kozlowski
In-Reply-To: <20260329123449.309814-2-krishnagopi487@gmail.com>
On 3/29/26 14:34, Gopi Krishna Menon wrote:
> Convert the SPEAr Thermal Sensor bindings to DT schema.
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Applied patch 1/2,
Thanks
^ permalink raw reply
* Re: [PATCH v3 1/1] arm64: defconfig: Enable CIX Sky1 pinctrl, PCIe host, and Cadence GPIO
From: Krzysztof Kozlowski @ 2026-03-30 7:56 UTC (permalink / raw)
To: Peter Chen, arnd
Cc: krzysztof.kozlowski, geert+renesas, linux-kernel,
linux-arm-kernel, cix-kernel-upstream, Yunseong Kim
In-Reply-To: <20260327114628.3800886-1-peter.chen@cixtech.com>
On 27/03/2026 12:46, Peter Chen wrote:
> Enable the CIX Sky1 pinctrl driver (PINCTRL_SKY1), CIX Sky1 PCIe host
> controller (PCI_SKY1_HOST), and Cadence GPIO controller (GPIO_CADENCE)
> for the Radxa Orion O6 board which uses the CIX Sky1 SoC.
>
> The pinctrl driver is a dependency for other on-SoC peripherals. The
> Cadence-based PCIe host controller enables use of PCIe peripherals on
> the board. The Cadence GPIO controller provides GPIO support for the
> SoC.
>
> Cc: Yunseong Kim <ysk@kzalloc.com>
> Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Best regards,
Krzysztof
^ permalink raw reply
* Re: [PATCH v5 6/9] arm64: dts: amlogic: t7: khadas-vim4: Add power regulators
From: Neil Armstrong @ 2026-03-30 7:55 UTC (permalink / raw)
To: Ronald Claveau, Kevin Hilman, Jerome Brunet, Martin Blumenstingl,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Ulf Hansson,
Johannes Berg, van Spriel
Cc: linux-arm-kernel, linux-amlogic, devicetree, linux-kernel,
linux-mmc, linux-wireless
In-Reply-To: <20260326-add-emmc-t7-vim4-v5-6-d3f182b48e9d@aliel.fr>
On 3/26/26 10:59, Ronald Claveau wrote:
> Add voltage regulator nodes describing the VIM4 power tree,
> required by peripheral nodes such as the SD card controller.
>
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
> ---
> .../dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts | 90 ++++++++++++++++++++++
> 1 file changed, 90 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
> index fffdab96b12eb..2450084d37642 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
> @@ -6,6 +6,8 @@
> /dts-v1/;
>
> #include "amlogic-t7.dtsi"
> +#include <dt-bindings/gpio/amlogic,t7-periphs-pinctrl.h>
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> model = "Khadas vim4";
> @@ -45,6 +47,94 @@ xtal: xtal-clk {
> #clock-cells = <0>;
> };
>
> + dc_in: regulator-dc-in {
> + compatible = "regulator-fixed";
> + regulator-name = "DC_IN";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + };
> +
> + sd_3v3: regulator-sdcard-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "SD_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vddao_3v3>;
> + gpio = <&gpio GPIOD_11 GPIO_ACTIVE_LOW>;
> + regulator-boot-on;
> + enable-active-low;
This properly is invalid, please send follow up patch removing this,
Thanks,
Neil
<snip>
^ permalink raw reply
* Re: [PATCH v1 0/3] arm64: dts: amlogic: meson-s4: enable RTC and IR for Khadas VIM1S
From: Neil Armstrong @ 2026-03-30 7:52 UTC (permalink / raw)
To: khilman, martin.blumenstingl, jbrunet, Nick Xie
Cc: krzk+dt, robh, conor+dt, linux-amlogic, linux-arm-kernel,
devicetree, linux-kernel
In-Reply-To: <20260327093016.722095-1-nick@khadas.com>
Hi,
On Fri, 27 Mar 2026 17:30:13 +0800, Nick Xie wrote:
> This series adds support for the Real Time Clock (RTC) on the Amlogic
> Meson S4 (S905Y4) SoC and enables the hardware RTC and IR receiver on
> the Khadas VIM1S board.
>
> - Patch 1 adds the internal Virtual RTC (VRTC) controller node to the
> Meson S4 SoC dtsi.
> - Patch 2 enables the I2C-attached Haoyu Micro HYM8563 RTC on the
> Khadas VIM1S board. It also sets up aliases to ensure the hardware
> RTC is prioritized as rtc0 over the VRTC.
> - Patch 3 configures the default keymap to "rc-khadas" to support the
> official Khadas IR remote control.
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v7.1/arm64-dt)
[1/3] arm64: dts: amlogic: meson-s4: add VRTC node
https://git.kernel.org/amlogic/c/af0f8f769f89715692ba7abc4716ecb7aa9af028
[2/3] arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: enable HYM8563 RTC
https://git.kernel.org/amlogic/c/3da3598f65d00f72a17a16c171ba52897d8e96a6
[3/3] arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: use rc-khadas keymap
https://git.kernel.org/amlogic/c/c15edbda012eff7cca4c6c6bfedc04bde5e8adf6
These changes has been applied on the intermediate git tree [1].
The v7.1/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.
In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].
The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.
If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
--
Neil
^ permalink raw reply
* Re: [PATCH] drm/exynos/dma: Drop iommu_dma_init_domain() stub
From: Marek Szyprowski @ 2026-03-30 7:51 UTC (permalink / raw)
To: Chen-Yu Tsai, Inki Dae, Seung-Woo Kim, Kyungmin Park,
Krzysztof Kozlowski, Alim Akhtar
Cc: David Airlie, Simona Vetter, dri-devel, linux-samsung-soc,
linux-arm-kernel, linux-kernel
In-Reply-To: <20260326093039.1152770-1-wenst@chromium.org>
On 26.03.2026 10:30, Chen-Yu Tsai wrote:
> Commit 1feda5eb77fc ("drm/exynos: Use selected dma_dev default iommu
> domain instead of a fake one") removed the code around creating a
> custom IOMMU domain, but forgot to remove the stub.
>
> Remove the iommu_dma_init_domain() stub as the function is no longer
> referenced, and was also made private to the IOMMU DMA code.
>
> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
> drivers/gpu/drm/exynos/exynos_drm_dma.c | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dma.c b/drivers/gpu/drm/exynos/exynos_drm_dma.c
> index 6a6761935224..ccc6b852ee7d 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_dma.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dma.c
> @@ -23,10 +23,6 @@
> #define to_dma_iommu_mapping(dev) NULL
> #endif
>
> -#if !defined(CONFIG_IOMMU_DMA)
> -#define iommu_dma_init_domain(...) ({ -EINVAL; })
> -#endif
> -
> #define EXYNOS_DEV_ADDR_START 0x20000000
> #define EXYNOS_DEV_ADDR_SIZE 0x40000000
>
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
^ permalink raw reply
* Re: [PATCH v14 00/12] crypto/dmaengine: qce: introduce BAM locking and use DMA for register I/O
From: Bartosz Golaszewski @ 2026-03-30 7:48 UTC (permalink / raw)
To: Bartosz Golaszewski
Cc: Vinod Koul, Jonathan Corbet, Thara Gopinath, Herbert Xu,
David S. Miller, Udit Tiwari, Md Sadre Alam, Dmitry Baryshkov,
Manivannan Sadhasivam, Stephan Gerhold, Bjorn Andersson,
Peter Ujfalusi, Michal Simek, Frank Li, dmaengine, linux-doc,
linux-kernel, linux-arm-msm, linux-crypto, linux-arm-kernel,
Bartosz Golaszewski, Dmitry Baryshkov, Konrad Dybcio
In-Reply-To: <20260323-qcom-qce-cmd-descr-v14-0-f323af411274@oss.qualcomm.com>
On Mon, Mar 23, 2026 at 4:17 PM Bartosz Golaszewski
<bartosz.golaszewski@oss.qualcomm.com> wrote:
>
> This iteration is quite similar to v12 but uses the BAM's NWD bit on
> data descriptors as suggested by Stephan. To that end, there are some
> more changes like reversing the order of command and data descriptors
> queuedy by the QCE driver.
>
> Currently the QCE crypto driver accesses the crypto engine registers
> directly via CPU. Trust Zone may perform crypto operations simultaneously
> resulting in a race condition. To remedy that, let's introduce support
> for BAM locking/unlocking to the driver. The BAM driver will now wrap
> any existing issued descriptor chains with additional descriptors
> performing the locking when the client starts the transaction
> (dmaengine_issue_pending()). The client wanting to profit from locking
> needs to switch to performing register I/O over DMA and communicate the
> address to which to perform the dummy writes via a call to
> dmaengine_desc_attach_metadata().
>
> In the specific case of the BAM DMA this translates to sending command
> descriptors performing dummy writes with the relevant flags set. The BAM
> will then lock all other pipes not related to the current pipe group, and
> keep handling the current pipe only until it sees the the unlock bit.
>
Hi Vinod et al!
Any chance of this making v7.1? Stephan, Mani: any objections to the
current approach?
Bart
^ permalink raw reply
* Re: [PATCH v3 7/9] regulator: mt6392: Add support for MT6392 regulator
From: Luca Leonardo Scorcia @ 2026-03-30 7:39 UTC (permalink / raw)
To: Chen-Yu Tsai
Cc: linux-mediatek, Fabien Parent, Val Packett, Dmitry Torokhov,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Sen Chu,
Sean Wang, Macpaul Lin, Lee Jones, Matthias Brugger,
AngeloGioacchino Del Regno, Linus Walleij, Liam Girdwood,
Mark Brown, Gary Bisson, Louis-Alexis Eyraud, Julien Massot,
Chen Zhong, linux-input, devicetree, linux-kernel, linux-pm,
linux-arm-kernel, linux-gpio
In-Reply-To: <CAGXv+5GmDtrtFHJXs+fDyF+dZ5YW-TSEqXnPs2xCH8cu-Xcn9w@mail.gmail.com>
Il giorno gio 19 mar 2026 alle ore 06:04 Chen-Yu Tsai
<wenst@chromium.org> ha scritto:
> If this PMIC is anything like the MT6358, then it has 0.01V fine
> tuning for most if not all the LDOs. It is sometimes needed as
> a rail may have a 0.04V boost that would otherwise be invisible
> to the system. And then if you have something like 3.04V set in
> the DT constraints, you end up with something the regulator driver
> doesn't support, but the hardware does.
>
> Please see how it's done in the MT6358 driver. I spent a lot of
> time on that driver to make it actually support the full range
> of voltages, and describing the supplies.
>
I had a good look at the datasheet (MT6392 PMIC Datasheet v1.0 08 Dec.
2016) and unfortunately I did not see any fine tuning option in there.
I'm sure this data sheet is not perfect as it's missing some regulator
registers that are clearly used in the Android sources, but there's no
mention of fine tuning in that code either. I guess it does not have
that capability.
I will shortly submit v4 that hopefully addresses the rest of the comments.
Thanks for your help!
--
Luca Leonardo Scorcia
l.scorcia@gmail.com
^ permalink raw reply
* RE: [PATCH v2] PCI: imx6: Don't remove MSI capability For i.MX7D/i.MX8M
From: Hongxing Zhu @ 2026-03-30 7:11 UTC (permalink / raw)
To: Frank Li
Cc: l.stach@pengutronix.de, lpieralisi@kernel.org,
kwilczynski@kernel.org, mani@kernel.org, robh@kernel.org,
bhelgaas@google.com, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
imx@lists.linux.dev, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
In-Reply-To: <acau0qZNUqEQmGKS@lizhi-Precision-Tower-5810>
> -----Original Message-----
> From: Frank Li <frank.li@nxp.com>
> Sent: 2026年3月28日 0:23
> To: Hongxing Zhu <hongxing.zhu@nxp.com>
> Cc: l.stach@pengutronix.de; lpieralisi@kernel.org; kwilczynski@kernel.org;
> mani@kernel.org; robh@kernel.org; bhelgaas@google.com;
> s.hauer@pengutronix.de; kernel@pengutronix.de; festevam@gmail.com;
> linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> imx@lists.linux.dev; linux-kernel@vger.kernel.org; stable@vger.kernel.org
> Subject: Re: [PATCH v2] PCI: imx6: Don't remove MSI capability For
> i.MX7D/i.MX8M
>
> On Fri, Mar 27, 2026 at 08:12:29AM +0000, Hongxing Zhu wrote:
> > > -----Original Message-----
> > > From: Frank Li <frank.li@nxp.com>
> > > Sent: 2026年3月19日 22:17
> > > To: Hongxing Zhu <hongxing.zhu@nxp.com>
> > > Cc: l.stach@pengutronix.de; lpieralisi@kernel.org;
> > > kwilczynski@kernel.org; mani@kernel.org; robh@kernel.org;
> > > bhelgaas@google.com; s.hauer@pengutronix.de;
> kernel@pengutronix.de;
> > > festevam@gmail.com; linux-pci@vger.kernel.org;
> > > linux-arm-kernel@lists.infradead.org;
> > > imx@lists.linux.dev; linux-kernel@vger.kernel.org;
> > > stable@vger.kernel.org
> > > Subject: Re: [PATCH v2] PCI: imx6: Don't remove MSI capability For
> > > i.MX7D/i.MX8M
> > >
> > > On Thu, Mar 19, 2026 at 05:18:23PM +0800, Richard Zhu wrote:
> > > > The MSI trigger mechanism for endpoint devices connected to
> > > > i.MX7D, i.MX8MM, and i.MX8MQ PCIe root complex ports depends on
> > > > the MSI capability register settings in the root complex. Removing
> > > > the MSI capability breaks MSI functionality for these endpoints.
> > > >
> > > > Preserve the MSI capability for i.MX7D/i.MX8M PCIe root complex to
> > > > maintain MSI functionality.
> > > >
> > > > Cc: stable@vger.kernel.org
> > > > Fixes: f5cd8a929c825 ("PCI: dwc: Remove MSI/MSIX capability for
> > > > Root Port if iMSI-RX is used as MSI controller")
> > >
> > > I think it'd better add another varible to check in f5cd8a929c825 if
> > > (pp->has_msi_ctrl && !pp->xxx_broken) or direct use IP version,
> > > which already auto detected.
> > >
> > > Previous patch have not consider this old version controller.
> > Hi Frank:
> > From what I've observed, this behavior seems tied to the specific
> > controller design. For example, neither the i.MX6Q nor the i.MX6SX exhibit
> this issue.
>
> Yes, should rename has_msi_ctrl -> disable_msi_ctrl. Set it according to
> difference condition, such as has_msi_ctrl or skip it for problem platform
> such as i.MX8MM and i.MX8MQ.
>
> Disable it and overwrite later will cause confuse.
>
How about adding a boolean field to dw_pcie_rp struct to indicate platforms
that should preserve the MSI capability during initialization.
struct dw_pcie_rp {
bool use_imsi_rx:1;
+ bool preserve_msi_cap; /* Don't remove MSI capability if true */
bool cfg0_io_shared:1;
u64 cfg0_base;
void __iomem *va_cfg0_base;
> >
> > The intention of commit f5cd8a929c825 is to remove the MSI capability
> > from the Root Complex (RC). From the author's perspective, this change
> > should not affect the Endpoint's (EP) MSI functionality.
>
> Yes, your patch fix RC mode?
My patch fixes the EP MSI broken issue after removing RC's MSI capability.
Best Regards
Richard Zhu
>
> Frank
> >
> > I'm not sure do this check (pp->has_msi_ctrl && !pp->msi_broken) is
> proper or not.
> > Best Regards
> > Richard Zhu
> > > >
^ permalink raw reply
* Re: [PATCH v2] PCI: imx6: Don't remove MSI capability For i.MX7D/i.MX8M
From: Manivannan Sadhasivam @ 2026-03-30 7:22 UTC (permalink / raw)
To: Richard Zhu
Cc: frank.li, l.stach, lpieralisi, kwilczynski, robh, bhelgaas,
s.hauer, kernel, festevam, linux-pci, linux-arm-kernel, imx,
linux-kernel, stable, Qiang Yu
In-Reply-To: <20260319091823.446030-1-hongxing.zhu@nxp.com>
+ Qiang
On Thu, Mar 19, 2026 at 05:18:23PM +0800, Richard Zhu wrote:
> The MSI trigger mechanism for endpoint devices connected to i.MX7D,
> i.MX8MM, and i.MX8MQ PCIe root complex ports depends on the MSI
> capability register settings in the root complex. Removing the MSI
> capability breaks MSI functionality for these endpoints.
>
What is the relation between Root Port MSI and endpoint MSI? Endpoint MSIs
should be routed to the platform MSI controller (DWC i.MSI-RX or External like
GIC-ITS) independent of the Root Port MSI state.
I'm just trying to understand the issue here.
- Mani
> Preserve the MSI capability for i.MX7D/i.MX8M PCIe root complex to
> maintain MSI functionality.
>
> Cc: stable@vger.kernel.org
> Fixes: f5cd8a929c825 ("PCI: dwc: Remove MSI/MSIX capability for Root Port if iMSI-RX is used as MSI controller")
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
> v2 changes:
> CC stable tree.
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 15 ++++++++++++++-
> 1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 20dafd2710a3..0b0d6a210406 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -41,6 +41,7 @@
> #define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11)
> #define IMX8MQ_GPR_PCIE_VREG_BYPASS BIT(12)
> #define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8)
> +#define IMX8MM_PCIE_MSI_CAP_OFFSET 0x50
>
> #define IMX95_PCIE_PHY_GEN_CTRL 0x0
> #define IMX95_PCIE_REF_USE_PAD BIT(17)
> @@ -117,6 +118,7 @@ enum imx_pcie_variants {
> #define IMX_PCIE_FLAG_HAS_LUT BIT(10)
> #define IMX_PCIE_FLAG_8GT_ECN_ERR051586 BIT(11)
> #define IMX_PCIE_FLAG_SKIP_L23_READY BIT(12)
> +#define IMX_PCIE_FLAG_KEEP_MSI_CAP BIT(13)
>
> #define imx_check_flag(pci, val) (pci->drvdata->flags & val)
>
> @@ -976,10 +978,17 @@ static int imx_pcie_start_link(struct dw_pcie *pci)
> {
> struct imx_pcie *imx_pcie = to_imx_pcie(pci);
> struct device *dev = pci->dev;
> - u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> + u8 offset;
> u32 tmp;
> int ret;
>
> + if (imx_pcie->drvdata->flags & IMX_PCIE_FLAG_KEEP_MSI_CAP) {
> + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_PM);
> + dw_pcie_dbi_ro_wr_en(pci);
> + dw_pcie_writeb_dbi(pci, offset + 1, IMX8MM_PCIE_MSI_CAP_OFFSET);
> + dw_pcie_dbi_ro_wr_dis(pci);
> + }
> +
> if (!(imx_pcie->drvdata->flags &
> IMX_PCIE_FLAG_SPEED_CHANGE_WORKAROUND)) {
> imx_pcie_ltssm_enable(dev);
> @@ -991,6 +1000,7 @@ static int imx_pcie_start_link(struct dw_pcie *pci)
> * started in Gen2 mode, there is a possibility the devices on the
> * bus will not be detected at all. This happens with PCIe switches.
> */
> + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> dw_pcie_dbi_ro_wr_en(pci);
> tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
> tmp &= ~PCI_EXP_LNKCAP_SLS;
> @@ -1897,6 +1907,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
> [IMX7D] = {
> .variant = IMX7D,
> .flags = IMX_PCIE_FLAG_SUPPORTS_SUSPEND |
> + IMX_PCIE_FLAG_KEEP_MSI_CAP |
> IMX_PCIE_FLAG_HAS_APP_RESET |
> IMX_PCIE_FLAG_SKIP_L23_READY |
> IMX_PCIE_FLAG_HAS_PHY_RESET,
> @@ -1909,6 +1920,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
> [IMX8MQ] = {
> .variant = IMX8MQ,
> .flags = IMX_PCIE_FLAG_HAS_APP_RESET |
> + IMX_PCIE_FLAG_KEEP_MSI_CAP |
> IMX_PCIE_FLAG_HAS_PHY_RESET |
> IMX_PCIE_FLAG_SUPPORTS_SUSPEND,
> .gpr = "fsl,imx8mq-iomuxc-gpr",
> @@ -1923,6 +1935,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
> [IMX8MM] = {
> .variant = IMX8MM,
> .flags = IMX_PCIE_FLAG_SUPPORTS_SUSPEND |
> + IMX_PCIE_FLAG_KEEP_MSI_CAP |
> IMX_PCIE_FLAG_HAS_PHYDRV |
> IMX_PCIE_FLAG_HAS_APP_RESET,
> .gpr = "fsl,imx8mm-iomuxc-gpr",
> --
> 2.37.1
>
--
மணிவண்ணன் சதாசிவம்
^ permalink raw reply
* Re: [PATCH v2 2/2] ARM: dts: gemini: Rename power controller node to gemini-poweroff
From: Krzysztof Kozlowski @ 2026-03-30 7:22 UTC (permalink / raw)
To: Khushal Chitturi
Cc: sre, robh, krzk+dt, conor+dt, ulli.kroll, linusw, daniel.baluta,
simona.toaca, d-gole, m-chawdhry, linux-pm, devicetree,
linux-arm-kernel, linux-kernel
In-Reply-To: <20260329205151.15161-3-khushalchitturi@gmail.com>
On Mon, Mar 30, 2026 at 02:21:51AM +0530, Khushal Chitturi wrote:
> Update the node name for the Cortina Gemini power controller from
> power-controller to gemini-poweroff since node "power controller" is
> reserved for power domain controller.
>
> Signed-off-by: Khushal Chitturi <khushalchitturi@gmail.com>
> ---
> arch/arm/boot/dts/gemini/gemini.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/gemini/gemini.dtsi b/arch/arm/boot/dts/gemini/gemini.dtsi
> index befe322bd7de..c524adadcf81 100644
> --- a/arch/arm/boot/dts/gemini/gemini.dtsi
> +++ b/arch/arm/boot/dts/gemini/gemini.dtsi
> @@ -228,7 +228,7 @@ intcon: interrupt-controller@48000000 {
> #interrupt-cells = <2>;
> };
>
> - power-controller@4b000000 {
> + gemini-poweroff@4b000000 {
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
If you cannot find a name matching your device, please check in kernel
sources for similar cases or you can grow the spec (via pull request to
DT spec repo).
Why gemini is added here? It's not generic.
Best regards,
Krzysztof
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox