* [PATCH 1/2] ARM: dts: imx35: remove empty clock-names for nand-controller@bb000000
From: Frank Li @ 2026-04-03 7:46 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Daniel Baluta, Shawn Guo,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
open list
Cc: imx, miquel.raynal
clock-names is empty in nand-controller@bb000000, which is wrong.
Remove it to fix below CHECK_DTBS warings:
arch/arm/boot/dts/nxp/imx/imx35-pdk.dtb: nand-controller@bb000000 (fsl,imx35-nand): Unevaluated properties are not allowed ('clock-names' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
arch/arm/boot/dts/nxp/imx/imx35.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
index ab7b646399894..314c4f4845288 100644
--- a/arch/arm/boot/dts/nxp/imx/imx35.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
@@ -369,7 +369,6 @@ nfc: nand-controller@bb000000 {
compatible = "fsl,imx35-nand", "fsl,imx25-nand";
reg = <0xbb000000 0x2000>;
clocks = <&clks 29>;
- clock-names = "";
interrupts = <33>;
status = "disabled";
};
--
2.43.0
^ permalink raw reply related
* Re: [GIT PULL 1/7] dt-bindings: Changes for v7.1-rc1
From: Krzysztof Kozlowski @ 2026-04-03 7:39 UTC (permalink / raw)
To: Thierry Reding, arm, soc
Cc: Thierry Reding, Jon Hunter, linux-tegra, linux-arm-kernel
In-Reply-To: <ac5aLzMyfnxa-LLi@orome>
On 02/04/2026 14:00, Thierry Reding wrote:
> On Sun, Mar 29, 2026 at 05:10:38PM +0200, Thierry Reding wrote:
>> From: Thierry Reding <thierry.reding@gmail.com>
>>
>> Hi ARM SoC maintainers,
>>
>> The following changes since commit 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f:
>>
>> Linux 7.0-rc1 (2026-02-22 13:18:59 -0800)
>>
>> are available in the Git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-7.1-dt-bindings
>>
>> for you to fetch changes up to bed2f5b4de6c6fd8f8928f6373ad92e8795c370f:
>>
>> dt-bindings: arm: tegra: Document Jetson AGX Thor DevKit (2026-03-28 01:05:24 +0100)
>>
>> Thanks,
>> Thierry
>>
>> ----------------------------------------------------------------
>> dt-bindings: Changes for v7.1-rc1
>>
>> This contains a few conversions to DT schema along with various
>> additions and fixes to reduce the amount of validation warnings.
>>
>> Included are also a new binding for the PCIe controller found on
>> Tegra264 as well as compatible strings for the Jetson AGX Thor
>> Developer Kit.
>>
>> ----------------------------------------------------------------
>> Sumit Gupta (1):
>> dt-bindings: arm: tegra: Add Tegra238 CBB compatible strings
>>
>> Svyatoslav Ryhel (1):
>> dt-bindings: display: tegra: Document Tegra20 HDMI port
>>
>> Thierry Reding (9):
>> dt-bindings: pci: Document the NVIDIA Tegra264 PCIe controller
>> dt-bindings: phy: tegra-xusb: Document Type C support
>> dt-bindings: clock: tegra124-dfll: Convert to json-schema
>> dt-bindings: interrupt-controller: tegra: Fix reg entries
>> dt-bindings: arm: tegra: Add missing compatible strings
>> dt-bindings: phy: tegra: Document Tegra210 USB PHY
>> dt-bindings: memory: Add Tegra210 memory controller bindings
>> dt-bindings: memory: tegra210: Mark EMC as cooling device
>> dt-bindings: arm: tegra: Document Jetson AGX Thor DevKit
>>
>> Documentation/devicetree/bindings/arm/tegra.yaml | 56 +++-
>> .../bindings/arm/tegra/nvidia,tegra234-cbb.yaml | 4 +
>> .../bindings/clock/nvidia,tegra124-dfll.txt | 155 -----------
>> .../bindings/clock/nvidia,tegra124-dfll.yaml | 290 +++++++++++++++++++++
>> .../display/tegra/nvidia,tegra20-hdmi.yaml | 13 +-
>> .../interrupt-controller/nvidia,tegra20-ictlr.yaml | 23 +-
>> .../memory-controllers/nvidia,tegra210-emc.yaml | 6 +-
>> .../memory-controllers/nvidia,tegra210-mc.yaml | 77 ++++++
>> .../bindings/pci/nvidia,tegra264-pcie.yaml | 149 +++++++++++
>> .../bindings/phy/nvidia,tegra194-xusb-padctl.yaml | 39 ++-
>> .../bindings/phy/nvidia,tegra20-usb-phy.yaml | 1 +
>> 11 files changed, 649 insertions(+), 164 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
>> create mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.yaml
>> create mode 100644 Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-mc.yaml
>> create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra264-pcie.yaml
>
> Hi ARM SoC maintainers,
>
> Please ignore this for now. I'm dropping my set of patches from this
> because they upset the DT maintainers. I'll send another version with
> only Sumit and Svyatoslav's patches.
I plan to take this, because rejecting it won't improve anything and
patches seems to be non-conflicting. In the future, please do not filter
out addresses of other maintainers and their lists from
get_maintainers.pl output for patches belonging to their subsystems. If
the patchset becomes 50-Cc-patch-bomb, then standard rule of submitting
patches applies - should be split.
Best regards,
Krzysztof
^ permalink raw reply
* Re: [GIT PULL 6/7] arm64: tegra: Device tree changes for v7.1-rc1
From: Krzysztof Kozlowski @ 2026-04-03 7:35 UTC (permalink / raw)
To: Thierry Reding, arm, soc
Cc: Thierry Reding, Jon Hunter, linux-tegra, linux-arm-kernel
In-Reply-To: <ac5ahWb1I-qnaK_Y@orome>
On 02/04/2026 14:02, Thierry Reding wrote:
> On Sun, Mar 29, 2026 at 05:10:43PM +0200, Thierry Reding wrote:
>> From: Thierry Reding <thierry.reding@gmail.com>
>>
>> Hi ARM SoC maintainers,
>>
>> The following changes since commit 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f:
>>
>> Linux 7.0-rc1 (2026-02-22 13:18:59 -0800)
>>
>> are available in the Git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git tags/tegra-for-7.1-arm64-dt
>>
>> for you to fetch changes up to c70e6bc11d2008fbb19695394b69fd941ab39030:
>>
>> arm64: tegra: Add Tegra264 GPIO controllers (2026-03-28 01:36:46 +0100)
>>
>> Thanks,
>> Thierry
>>
>> ----------------------------------------------------------------
>> arm64: tegra: Device tree changes for v7.1-rc1
>>
>> Various fixes and new additions across a number of devices. GPIO and PCI
>> are enabled on Tegra264 and the Jetson AGX Thor Developer Kit, allowing
>> it to boot via network and mass storage.
>>
>> ----------------------------------------------------------------
>> Diogo Ivo (1):
>> arm64: tegra: smaug: Enable SPI-NOR flash
>>
>> Jon Hunter (1):
>> arm64: tegra: Fix RTC aliases
>>
>> Prathamesh Shete (1):
>> arm64: tegra: Add Tegra264 GPIO controllers
>>
>> Thierry Reding (6):
>> dt-bindings: pci: Document the NVIDIA Tegra264 PCIe controller
>> Merge branch for-7.1/dt-bindings into for-7.1/pci
>> arm64: tegra: Fix snps,blen properties
>> arm64: tegra: Drop redundant clock and reset names for TSEC
>> arm64: tegra: Add PCI controllers on Tegra264
>> arm64: tegra: Add Jetson AGX Thor Developer Kit support
>>
>> .../bindings/pci/nvidia,tegra264-pcie.yaml | 149 +++++++++
>> arch/arm64/boot/dts/nvidia/Makefile | 2 +
>> arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 12 +
>> arch/arm64/boot/dts/nvidia/tegra210.dtsi | 2 -
>> arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi | 1 +
>> arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi | 1 +
>> arch/arm64/boot/dts/nvidia/tegra234.dtsi | 6 +-
>> .../dts/nvidia/tegra264-p4071-0000+p3834-0008.dts | 11 +
>> .../boot/dts/nvidia/tegra264-p4071-0000+p3834.dtsi | 12 +
>> arch/arm64/boot/dts/nvidia/tegra264.dtsi | 336 +++++++++++++++++++--
>> 10 files changed, 500 insertions(+), 32 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra264-pcie.yaml
>> create mode 100644 arch/arm64/boot/dts/nvidia/tegra264-p4071-0000+p3834-0008.dts
>> create mode 100644 arch/arm64/boot/dts/nvidia/tegra264-p4071-0000+p3834.dtsi
>
> Hi ARM SoC maintainers,
>
> DT maintainers objected to the way I wanted to handle the DT bindings
> dependency here, so I'll drop the whole PCI stuff from this and redo the
> PR.
It took me ages to get that information from you but finally you pointed
me that this is shared with PCI, so it is fine.
Best regards,
Krzysztof
^ permalink raw reply
* [PATCH] arm64: dts: rockchip: odroid-m2: Enable DisplayPort Alt Mode over USB-C
From: Clemens Malten @ 2026-04-03 7:25 UTC (permalink / raw)
To: heiko
Cc: robh, krzk+dt, conor+dt, devicetree, linux-arm-kernel,
linux-rockchip, linux-kernel, Clemens Malten
Enable USB-C DisplayPort Alt Mode on the ODROID-M2 board (RK3588S) by
adding the necessary DTS changes:
- Enable dp0 controller (dw-dp driver)
- Add VOP2 video pipeline endpoints: vp2 -> dp0 -> usbdp_phy0
- Fix try-power-role from 'source' to 'sink' to allow the board to
receive power and trigger correct PD negotiation
- Add altmodes block to the USB-C connector with DP SVID (0xff01) and
VDO. Note: svid must be declared as a 16-bit value (/bits/ 16) as
required by the typec class driver (fwnode_property_read_u16)
Tested on ODROID-M2 (RK3588S) with a UGreen CM654 USB-C DP adapter
under mainline Linux 6.19-rc.
This patch depends on Andy Yan's RK3588 DisplayPort Controller series:
Link: https://lore.kernel.org/all/20250822063959.692098-1-andyshrk@163.com/
Signed-off-by: Clemens Malten <c.malten@proton.me>
---
.../boot/dts/rockchip/rk3588s-odroid-m2.dts | 29 ++++++++++++++++++-
1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts
index a72063c55..dbc62f032 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts
@@ -352,7 +352,17 @@ connector {
power-role = "dual";
sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- try-power-role = "source";
+ try-power-role = "sink";
+
+ altmodes {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ altmode@0 {
+ reg = <0>;
+ svid = /bits/ 16 <0xff01>;
+ vdo = <0xffffffff>;
+ };
+ };
ports {
#address-cells = <1>;
@@ -952,3 +962,20 @@ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
remote-endpoint = <&hdmi0_in_vp0>;
};
};
+
+&dp0 {
+ status = "okay";
+};
+
+&dp0_in {
+ dp0_in_vp2: endpoint {
+ remote-endpoint = <&vp2_out_dp0>;
+ };
+};
+
+&vp2 {
+ vp2_out_dp0: endpoint@a {
+ reg = <ROCKCHIP_VOP2_EP_DP0>;
+ remote-endpoint = <&dp0_in_vp2>;
+ };
+};
--
2.53.0
^ permalink raw reply related
* Re: [PATCH v5 4/4] ARM: omap1: enable real software node lookup of GPIOs on Nokia 770
From: Bartosz Golaszewski @ 2026-04-03 7:23 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Bartosz Golaszewski, Greg Kroah-Hartman, Rafael J. Wysocki,
Danilo Krummrich, Andy Shevchenko, Daniel Scally, Heikki Krogerus,
Sakari Ailus, Aaro Koskinen, Janusz Krzysztofik, Tony Lindgren,
Russell King, Kevin Hilman, Arnd Bergmann, driver-core,
linux-kernel, linux-acpi, linux-arm-kernel, linux-omap
In-Reply-To: <ac6n1p3eLVFzumbt@google.com>
On Thu, Apr 2, 2026 at 7:32 PM Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:
>
> On Thu, Apr 02, 2026 at 04:15:05PM +0200, Bartosz Golaszewski wrote:
> > @@ -244,6 +263,13 @@ static int __init omap16xx_gpio_init(void)
> > iounmap(base);
> >
> > platform_device_register(omap16xx_gpio_dev[i]);
> > +
> > + ret = device_add_software_node(&omap16xx_gpio_dev[i]->dev,
> > + omap16xx_gpio_swnodes[i]);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to add software node.\n");
> > + return ret;
> > + }
>
> I think the best and safest way is to convert to using
> platform_driver_register_full() and set swnode in the relevant "info"
> instance.
For sure, that's the plan. I will respin this after v7.1-rc1 with that change.
Bart
^ permalink raw reply
* Re: [PATCH v6 2/3] dt-bindings: media: mediatek-jpeg-encoder: add MT8189 compatible string
From: Krzysztof Kozlowski @ 2026-04-03 7:15 UTC (permalink / raw)
To: Jianhua Lin, nicolas, mchehab, robh, krzk+dt, conor+dt,
matthias.bgg, angelogioacchino.delregno
Cc: devicetree, linux-kernel, linux-media, linux-arm-kernel,
linux-mediatek, Project_Global_Chrome_Upstream_Group, sirius.wang,
vince-wl.liu, jh.hsu
In-Reply-To: <20260403064912.17259-3-jianhua.lin@mediatek.com>
On 03/04/2026 08:49, Jianhua Lin wrote:
> Add the compatible string for the JPEG encoder block found in the
> MediaTek MT8189 SoC.
>
> Unlike some previous SoCs, the MT8189 JPEG encoder requires 34-bit IOVA
> address space support. Therefore, it is added as a standalone compatible
> string without falling back to the generic "mediatek,mtk-jpgenc" to
> ensure the driver applies the correct hardware-specific configurations.
>
> Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Not true.
> Suggested-by: Rob Herring <robh@kernel.org>
Is this some sort of joke of us?
You received no comments at v5 but "suggested-by" me appeared.
You received comments in v4 but you ignored them completely.
NAK, I am really getting fed up how absolutely terrible contributions
from Mediatek are. Mediatek doesn't follow the process, doesn't read the
documents describing the process, sends code which often fails basic
build testing.
Best regards,
Krzysztof
^ permalink raw reply
* Re: [PATCH v6 1/3] dt-bindings: media: mediatek-jpeg-decoder: add MT8189 compatible string
From: Krzysztof Kozlowski @ 2026-04-03 7:13 UTC (permalink / raw)
To: Jianhua Lin, nicolas, mchehab, robh, krzk+dt, conor+dt,
matthias.bgg, angelogioacchino.delregno
Cc: devicetree, linux-kernel, linux-media, linux-arm-kernel,
linux-mediatek, Project_Global_Chrome_Upstream_Group, sirius.wang,
vince-wl.liu, jh.hsu
In-Reply-To: <20260403064912.17259-2-jianhua.lin@mediatek.com>
On 03/04/2026 08:49, Jianhua Lin wrote:
> Add the compatible string for the JPEG decoder block found in the
> MediaTek MT8189 SoC.
>
> Compared to previous generation ICs, the MT8189 JPEG decoder requires
> 34-bit IOVA address space support and only needs a single clock
> ("jpgdec") instead of two. Therefore, it is added as a standalone
> compatible string without falling back to older SoCs.
>
> Update the binding schema to include the new compatible string and add
> an `allOf` block with conditional checks. This enforces the single clock
> requirement for MT8189 while preserving the two-clock requirement
> ("jpgdec-smi", "jpgdec") for older SoCs.
>
> Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
What?
> Suggested-by: Rob Herring <robh@kernel.org>
Where?
And I would say also - Why?
> Signed-off-by: Jianhua Lin <jianhua.lin@mediatek.com>
> ---
> .../bindings/media/mediatek-jpeg-decoder.yaml | 46 +++++++++++++++----
> 1 file changed, 38 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
> index a4aacd3eb189..6596b686980c 100644
> --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
> +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
> @@ -15,10 +15,10 @@ description: |-
> properties:
> compatible:
> oneOf:
> - - items:
> - - enum:
> - - mediatek,mt8173-jpgdec
> - - mediatek,mt2701-jpgdec
> + - enum:
> + - mediatek,mt2701-jpgdec
> + - mediatek,mt8173-jpgdec
> + - mediatek,mt8189-jpgdec
> - items:
> - enum:
> - mediatek,mt7623-jpgdec
> @@ -32,13 +32,20 @@ properties:
> maxItems: 1
>
> clocks:
> + minItems: 1
> maxItems: 2
> - minItems: 2
>
> clock-names:
> - items:
> - - const: jpgdec-smi
> - - const: jpgdec
> + oneOf:
> + - items:
> + - const: jpgdec
> + - items:
> + - const: jpgdec-smi
> + - const: jpgdec
> +
> + mediatek,larb:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: a phandle to the smi_larb node.
>
> power-domains:
> maxItems: 1
> @@ -60,6 +67,29 @@ required:
> - power-domains
> - iommus
>
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: mediatek,mt8189-jpgdec
> + then:
> + properties:
> + clocks:
> + minItems: 1
You are making some random changes to this.
Please go to previous version and read again feedback.
Best regards,
Krzysztof
^ permalink raw reply
* [GIT PULL] Microchip ARM64 SoC updates for v7.1
From: Claudiu Beznea @ 2026-04-03 7:06 UTC (permalink / raw)
To: soc, arm; +Cc: conor, nicolas.ferre, claudiu.beznea, linux-arm-kernel
The following changes since commit 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f:
Linux 7.0-rc1 (2026-02-22 13:18:59 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git tags/microchip-soc-7.1
for you to fetch changes up to e4ffa98a02f4d16eda9a5faec6792493b41dab35:
arm64: Kconfig: provide a top-level switch for Microchip platforms (2026-03-18 10:55:49 +0200)
----------------------------------------------------------------
Microchip ARM64 SoC updates for v7.1
This update includes:
- use a top-level configuration flag for all Microchip platforms
----------------------------------------------------------------
Bartosz Golaszewski (1):
arm64: Kconfig: provide a top-level switch for Microchip platforms
arch/arm64/Kconfig.platforms | 10 ++++------
arch/arm64/configs/defconfig | 1 +
2 files changed, 5 insertions(+), 6 deletions(-)
^ permalink raw reply
* [GIT PULL] Microchip ARM64 device tree updates for v7.1
From: Claudiu Beznea @ 2026-04-03 7:06 UTC (permalink / raw)
To: soc, arm; +Cc: conor, nicolas.ferre, claudiu.beznea, linux-arm-kernel
The following changes since commit 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f:
Linux 7.0-rc1 (2026-02-22 13:18:59 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git tags/microchip-dt64-7.1
for you to fetch changes up to 711cca0f1cfef57018654b969da4041c2bab68d3:
arm64: dts: microchip: add EV23X71A board (2026-03-20 10:56:22 +0200)
----------------------------------------------------------------
Microchip ARM64 device tree updates for v7.1
This update includes:
- device tree files for the Microchip LAN9691 SoC and its evaluation
board (Microchip EV23X71A)
----------------------------------------------------------------
Robert Marko (4):
arm64: dts: microchip: add LAN969x clock header file
arm64: dts: microchip: add LAN969x support
dt-bindings: arm: AT91: document EV23X71A board
arm64: dts: microchip: add EV23X71A board
.../devicetree/bindings/arm/atmel-at91.yaml | 6 +
arch/arm64/boot/dts/microchip/Makefile | 1 +
arch/arm64/boot/dts/microchip/clk-lan9691.h | 24 +
arch/arm64/boot/dts/microchip/lan9691.dtsi | 488 +++++++++++++
arch/arm64/boot/dts/microchip/lan9696-ev23x71a.dts | 756 +++++++++++++++++++++
5 files changed, 1275 insertions(+)
create mode 100644 arch/arm64/boot/dts/microchip/clk-lan9691.h
create mode 100644 arch/arm64/boot/dts/microchip/lan9691.dtsi
create mode 100644 arch/arm64/boot/dts/microchip/lan9696-ev23x71a.dts
^ permalink raw reply
* [GIT PULL] Microchip AT91 SoC updates for v7.1
From: Claudiu Beznea @ 2026-04-03 7:03 UTC (permalink / raw)
To: soc, arm; +Cc: nicolas.ferre, alexandre.belloni, claudiu.beznea,
linux-arm-kernel
The following changes since commit 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f:
Linux 7.0-rc1 (2026-02-22 13:18:59 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git tags/at91-soc-7.1
for you to fetch changes up to f3ae0049ff8a3d2cbd8c05857705744435629d0c:
dt-bindings: arm: atmel,at91rm9200-sdramc: convert to DT schema (2026-03-07 16:41:03 +0200)
----------------------------------------------------------------
Microchip AT91 SoC updates for v7.1
This update includes:
- device tree bindings conversion to DT schema for CHIPID, RAM
controller and PIT, PIT64b, ST timers
----------------------------------------------------------------
Akhila YS (5):
dt-bindings: arm: microchip,sama7g5-chipid : convert to DT schema
dt-bindings: arm: atmel,at91sam9260-pit: convert to DT schema
dt-bindings: arm: microchip,sam9x60-pit64b : convert to DT schema
dt-bindings: arm: atmel,at91rm9200-st: convert to DT schema
dt-bindings: arm: atmel,at91rm9200-sdramc: convert to DT schema
.../bindings/arm/atmel,at91rm9200-sdramc.yaml | 66 +++++++++++++++++++++
.../bindings/arm/atmel,at91rm9200-st.yaml | 69 ++++++++++++++++++++++
.../bindings/arm/atmel,at91sam9260-pit.yaml | 49 +++++++++++++++
.../devicetree/bindings/arm/atmel-sysregs.txt | 48 ---------------
.../bindings/arm/microchip,sam9x60-pit64b.yaml | 68 +++++++++++++++++++++
.../bindings/arm/microchip,sama7g5-chipid.yaml | 41 +++++++++++++
6 files changed, 293 insertions(+), 48 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/atmel,at91rm9200-sdramc.yaml
create mode 100644 Documentation/devicetree/bindings/arm/atmel,at91rm9200-st.yaml
create mode 100644 Documentation/devicetree/bindings/arm/atmel,at91sam9260-pit.yaml
delete mode 100644 Documentation/devicetree/bindings/arm/atmel-sysregs.txt
create mode 100644 Documentation/devicetree/bindings/arm/microchip,sam9x60-pit64b.yaml
create mode 100644 Documentation/devicetree/bindings/arm/microchip,sama7g5-chipid.yaml
^ permalink raw reply
* [GIT PULL] Microchip AT91 device tree updates for v7.1
From: Claudiu Beznea @ 2026-04-03 7:03 UTC (permalink / raw)
To: soc, arm; +Cc: nicolas.ferre, alexandre.belloni, claudiu.beznea,
linux-arm-kernel
The following changes since commit 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f:
Linux 7.0-rc1 (2026-02-22 13:18:59 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git tags/at91-dt-7.1
for you to fetch changes up to 7d7a9fc1310a0ade8ea61c5eb4d8b29456f8d604:
ARM: dts: microchip: sama7d65: add Cortex-A7 PMU node (2026-03-24 15:35:37 +0200)
----------------------------------------------------------------
Microchip AT91 device tree updates for v7.1
This update includes:
- enable LVDS, LCD and PMU for SAMA7D64 SoC
- drop unused #address-cells, #size-cells for SAM9X60 UDC node
----------------------------------------------------------------
Charan Pedumuru (1):
arm: dts: microchip: remove unused #address-cells/#size-cells from sam9x60 udc node
Mihai Sain (1):
ARM: dts: microchip: sama7d65: add Cortex-A7 PMU node
Ryan Wanner (2):
ARM: dts: microchip: sama7d65: add LCD controller
ARM: dts: microchip: sama7d65: add LVDS controller
arch/arm/boot/dts/microchip/sam9x60.dtsi | 2 --
arch/arm/boot/dts/microchip/sama7d65.dtsi | 40 +++++++++++++++++++++++++++++++
2 files changed, 40 insertions(+), 2 deletions(-)
^ permalink raw reply
* [GIT PULL] Microchip AT91 defconfig updates for v7.1
From: Claudiu Beznea @ 2026-04-03 7:02 UTC (permalink / raw)
To: soc, arm; +Cc: nicolas.ferre, alexandre.belloni, claudiu.beznea,
linux-arm-kernel
The following changes since commit 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f:
Linux 7.0-rc1 (2026-02-22 13:18:59 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git tags/at91-defconfig-7.1
for you to fetch changes up to 1f17fce8bf19a48e5e5610c6da8f806eab81878a:
ARM: configs: at91: sama7: enable LVDS serializer support (2026-02-28 16:04:03 +0200)
----------------------------------------------------------------
Microchip AT91 defconfig updates for v7.1
This update includes:
- LCD controller, LVDS controller, backlight, simple pannel, touchscreen
configuration flags required by SAMA7D65 SoC
----------------------------------------------------------------
Aubin Constans (1):
ARM: configs: at91: sama7: enable LVDS serializer support
Romain Sioen (1):
ARM: configs: at91: sama7: enable config for atmel maxtouch
Ryan Wanner (1):
ARM: configs: at91: sama7: enable DRM hlcdc support
arch/arm/configs/sama7_defconfig | 10 ++++++++++
1 file changed, 10 insertions(+)
^ permalink raw reply
* [GIT PULL] Microchip AT91 fixes for v7.0
From: Claudiu Beznea @ 2026-04-03 7:02 UTC (permalink / raw)
To: soc, arm; +Cc: nicolas.ferre, alexandre.belloni, claudiu.beznea,
linux-arm-kernel
The following changes since commit 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f:
Linux 7.0-rc1 (2026-02-22 13:18:59 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git tags/at91-fixes-7.0
for you to fetch changes up to 907150bbe566e23714a25d7bcb910f236c3c44c0:
ARM: dts: microchip: sam9x7: fix gpio-lines count for pioB (2026-03-23 12:54:24 +0200)
----------------------------------------------------------------
Microchip AT91 fixes for v7.0
This update includes:
- fix gpio-lines for SAM9X7 PIOB GPIO controller
----------------------------------------------------------------
Mihai Sain (1):
ARM: dts: microchip: sam9x7: fix gpio-lines count for pioB
arch/arm/boot/dts/microchip/sam9x7.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
^ permalink raw reply
* [PATCH v1 2/4] drm/bridge: dw-hdmi: Allow &dw_hdmi_plat_data.output_port = 0 without DRM_BRIDGE_ATTACH_NO_CONNECTOR
From: Damon Ding @ 2026-04-03 7:00 UTC (permalink / raw)
To: andrzej.hajda, neil.armstrong, rfoss, maarten.lankhorst, mripard,
tzimmermann, airlied, simona, hjc, heiko, andy.yan, wens, samuel,
luca.ceresoli
Cc: Laurent.pinchart, jonas, jernej.skrabec, victor.liu,
dmitry.baryshkov, shengjiu.wang, dri-devel, linux-kernel,
linux-arm-kernel, linux-rockchip, linux-sunxi, Damon Ding
In-Reply-To: <20260403070032.447102-1-damon.ding@rock-chips.com>
In the previous commit, Luca split the dw-hdmi attach process into two
cases:
A. hdmi->plat_data->output_port = 0:
the HDMI output (port@1) in device tree is not used
B. hdmi->plat_data->output_port = 1:
the HDMI output (port@1) is parsed to find the next bridge
For Rockchip, many older platforms (RK3288, RK3399, etc.) only support
case A by default. They can support DRM_BRIDGE_ATTACH_NO_CONNECTOR flag
after adapting to the bridge connector helper. Relax this constraint in
preparation for Rockchip dw-hdmi bridge-connector adaptation.
Link: https://lore.kernel.org/all/20260402-drm-lcdif-dbanc-v3-6-27cd247a0847@bootlin.com/
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index dd50dda3a4f5..20b2f9e145b0 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2912,9 +2912,8 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge,
{
struct dw_hdmi *hdmi = bridge->driver_private;
- /* DRM_BRIDGE_ATTACH_NO_CONNECTOR requires a remote-endpoint to the next bridge */
- if (WARN_ON((flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) && !hdmi->plat_data->output_port))
- return -EINVAL;
+ if ((flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) && !hdmi->plat_data->output_port)
+ return 0;
if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
struct device_node *remote __free(device_node) =
--
2.34.1
^ permalink raw reply related
* [PATCH v1 0/4] Apply bridge-connector for the Rockchip DW-HDMI driver
From: Damon Ding @ 2026-04-03 7:00 UTC (permalink / raw)
To: andrzej.hajda, neil.armstrong, rfoss, maarten.lankhorst, mripard,
tzimmermann, airlied, simona, hjc, heiko, andy.yan, wens, samuel,
luca.ceresoli
Cc: Laurent.pinchart, jonas, jernej.skrabec, victor.liu,
dmitry.baryshkov, shengjiu.wang, dri-devel, linux-kernel,
linux-arm-kernel, linux-rockchip, linux-sunxi, Damon Ding
This patch series depends on and must be applied after:
https://lore.kernel.org/all/20260402-drm-lcdif-dbanc-v3-7-27cd247a0847@bootlin.com/
(Series [v3,00/11] drm/mxsfb/lcdif: use DRM_BRIDGE_ATTACH_NO_CONNECTOR and the bridge-connector)
Patch 1: Make DRM_BRIDGE_ATTACH_NO_CONNECTOR optional for platforms that call
dw_hdmi_bind() to attach the dw-hdmi bridge.
Patch 2: Allow &dw_hdmi_plat_data.output_port = 0 without the attach flag
DRM_BRIDGE_ATTACH_NO_CONNECTOR for dw-hdmi bridge.
Patch 3: Apply bridge-connector for Rockchip dw-hdmi driver, so that connector
management is unified under bridge-connector. Treat dw-hdmi purely as
a bridge without using its own connector helper functions, which
partially overlaps with the bridge helper.
Patch 4: Add next bridge support for Rockchip dw-hdmi driver, so that it can
support both the HDMI connector and additional bridge chips.
Damon Ding (4):
drm/bridge: dw-hdmi: Pass bridge attach flags for dw_hdmi_bind()
drm/bridge: dw-hdmi: Allow &dw_hdmi_plat_data.output_port = 0 without
DRM_BRIDGE_ATTACH_NO_CONNECTOR
drm/rockchip: dw_hdmi: Apply DRM_BRIDGE_ATTACH_NO_CONNECTOR and the
bridge-connector
drm/rockchip: dw_hdmi: Support to find the next bridge
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 10 +++----
drivers/gpu/drm/rockchip/Kconfig | 1 +
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 33 ++++++++++++++++++---
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 2 +-
include/drm/bridge/dw_hdmi.h | 4 ++-
5 files changed, 39 insertions(+), 11 deletions(-)
--
2.34.1
^ permalink raw reply
* [PATCH v1 4/4] drm/rockchip: dw_hdmi: Support to find the next bridge
From: Damon Ding @ 2026-04-03 7:00 UTC (permalink / raw)
To: andrzej.hajda, neil.armstrong, rfoss, maarten.lankhorst, mripard,
tzimmermann, airlied, simona, hjc, heiko, andy.yan, wens, samuel,
luca.ceresoli
Cc: Laurent.pinchart, jonas, jernej.skrabec, victor.liu,
dmitry.baryshkov, shengjiu.wang, dri-devel, linux-kernel,
linux-arm-kernel, linux-rockchip, linux-sunxi, Damon Ding
In-Reply-To: <20260403070032.447102-1-damon.ding@rock-chips.com>
If there is a remote node connected to the HDMI output (port@1), the
&dw_hdmi_plat_data.output_port should be set to 1. This patch allows
Rockchip dw-hdmi to support the hdmi-connector and the next bridge.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
---
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index b5cfcb936078..014ac09fd733 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -544,6 +544,8 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
struct drm_encoder *encoder;
struct rockchip_hdmi *hdmi;
struct drm_connector *connector;
+ struct device_node *remote;
+ struct drm_bridge *next_bridge;
int ret;
if (!pdev->dev.of_node)
@@ -610,6 +612,18 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
platform_set_drvdata(pdev, hdmi);
+ remote = of_graph_get_remote_node(hdmi->dev->of_node, 1, -1);
+ if (remote) {
+ of_node_put(remote);
+
+ ret = drm_of_find_panel_or_bridge(hdmi->dev->of_node, 1, 0,
+ NULL, &next_bridge);
+ if (ret && ret != -ENODEV)
+ goto err_cleanup_encoder;
+
+ plat_data->output_port = 1;
+ }
+
hdmi->hdmi = dw_hdmi_bind(pdev, encoder, plat_data, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
/*
--
2.34.1
^ permalink raw reply related
* [PATCH v1 1/4] drm/bridge: dw-hdmi: Pass bridge attach flags for dw_hdmi_bind()
From: Damon Ding @ 2026-04-03 7:00 UTC (permalink / raw)
To: andrzej.hajda, neil.armstrong, rfoss, maarten.lankhorst, mripard,
tzimmermann, airlied, simona, hjc, heiko, andy.yan, wens, samuel,
luca.ceresoli
Cc: Laurent.pinchart, jonas, jernej.skrabec, victor.liu,
dmitry.baryshkov, shengjiu.wang, dri-devel, linux-kernel,
linux-arm-kernel, linux-rockchip, linux-sunxi, Damon Ding
In-Reply-To: <20260403070032.447102-1-damon.ding@rock-chips.com>
For Rockchip and Allwinner platforms, the HDMI encoder attaches the
dw-hdmi bridge via dw_hdmi_bind(). This additional bridge attach flag
serves as preparation for the Rockchip dw-hdmi driver to support the
bridge-connector framework.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 5 +++--
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 2 +-
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 2 +-
include/drm/bridge/dw_hdmi.h | 4 +++-
4 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index ada45e8b3e2c..dd50dda3a4f5 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -3619,7 +3619,8 @@ EXPORT_SYMBOL_GPL(dw_hdmi_remove);
*/
struct dw_hdmi *dw_hdmi_bind(struct platform_device *pdev,
struct drm_encoder *encoder,
- const struct dw_hdmi_plat_data *plat_data)
+ const struct dw_hdmi_plat_data *plat_data,
+ enum drm_bridge_attach_flags flags)
{
struct dw_hdmi *hdmi;
int ret;
@@ -3628,7 +3629,7 @@ struct dw_hdmi *dw_hdmi_bind(struct platform_device *pdev,
if (IS_ERR(hdmi))
return hdmi;
- ret = drm_bridge_attach(encoder, &hdmi->bridge, NULL, 0);
+ ret = drm_bridge_attach(encoder, &hdmi->bridge, NULL, flags);
if (ret) {
dw_hdmi_remove(hdmi);
return ERR_PTR(ret);
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 0dc1eb5d2ae3..21b141b7cb9c 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -608,7 +608,7 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
platform_set_drvdata(pdev, hdmi);
- hdmi->hdmi = dw_hdmi_bind(pdev, encoder, plat_data);
+ hdmi->hdmi = dw_hdmi_bind(pdev, encoder, plat_data, 0);
/*
* If dw_hdmi_bind() fails we'll never call dw_hdmi_unbind(),
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
index 96532709c2a7..04173335f7e7 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
@@ -188,7 +188,7 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
platform_set_drvdata(pdev, hdmi);
- hdmi->hdmi = dw_hdmi_bind(pdev, encoder, plat_data);
+ hdmi->hdmi = dw_hdmi_bind(pdev, encoder, plat_data, 0);
/*
* If dw_hdmi_bind() fails we'll never call dw_hdmi_unbind(),
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index 8500dd4f99d8..e789fb451ef2 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -6,6 +6,7 @@
#ifndef __DW_HDMI__
#define __DW_HDMI__
+#include <drm/drm_bridge.h>
#include <sound/hdmi-codec.h>
struct drm_display_info;
@@ -182,7 +183,8 @@ void dw_hdmi_remove(struct dw_hdmi *hdmi);
void dw_hdmi_unbind(struct dw_hdmi *hdmi);
struct dw_hdmi *dw_hdmi_bind(struct platform_device *pdev,
struct drm_encoder *encoder,
- const struct dw_hdmi_plat_data *plat_data);
+ const struct dw_hdmi_plat_data *plat_data,
+ enum drm_bridge_attach_flags flags);
void dw_hdmi_resume(struct dw_hdmi *hdmi);
--
2.34.1
^ permalink raw reply related
* [PATCH v1 3/4] drm/rockchip: dw_hdmi: Apply DRM_BRIDGE_ATTACH_NO_CONNECTOR and the bridge-connector
From: Damon Ding @ 2026-04-03 7:00 UTC (permalink / raw)
To: andrzej.hajda, neil.armstrong, rfoss, maarten.lankhorst, mripard,
tzimmermann, airlied, simona, hjc, heiko, andy.yan, wens, samuel,
luca.ceresoli
Cc: Laurent.pinchart, jonas, jernej.skrabec, victor.liu,
dmitry.baryshkov, shengjiu.wang, dri-devel, linux-kernel,
linux-arm-kernel, linux-rockchip, linux-sunxi, Damon Ding
In-Reply-To: <20260403070032.447102-1-damon.ding@rock-chips.com>
Convert this driver to DRM_BRIDGE_ATTACH_NO_CONNECTOR and to the
drm_bridge_connector framework which is the current DRM bridge best
practice.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
---
drivers/gpu/drm/rockchip/Kconfig | 1 +
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 19 +++++++++++++++----
2 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index e7f49fe845ea..69b832d0c8c4 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -76,6 +76,7 @@ config ROCKCHIP_DW_DP
config ROCKCHIP_DW_HDMI
bool "Rockchip specific extensions for Synopsys DW HDMI"
+ select DRM_BRIDGE_CONNECTOR
help
This selects support for Rockchip SoC specific extensions
for the Synopsys DesignWare HDMI driver. If you want to
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 21b141b7cb9c..b5cfcb936078 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -13,6 +13,7 @@
#include <linux/regulator/consumer.h>
#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_bridge_connector.h>
#include <drm/drm_edid.h>
#include <drm/drm_of.h>
#include <drm/drm_probe_helper.h>
@@ -542,6 +543,7 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
struct drm_device *drm = data;
struct drm_encoder *encoder;
struct rockchip_hdmi *hdmi;
+ struct drm_connector *connector;
int ret;
if (!pdev->dev.of_node)
@@ -608,7 +610,7 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
platform_set_drvdata(pdev, hdmi);
- hdmi->hdmi = dw_hdmi_bind(pdev, encoder, plat_data, 0);
+ hdmi->hdmi = dw_hdmi_bind(pdev, encoder, plat_data, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
/*
* If dw_hdmi_bind() fails we'll never call dw_hdmi_unbind(),
@@ -616,12 +618,21 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
*/
if (IS_ERR(hdmi->hdmi)) {
ret = PTR_ERR(hdmi->hdmi);
- goto err_bind;
+ goto err_cleanup_encoder;
}
- return 0;
+ connector = drm_bridge_connector_init(drm, encoder);
+ if (IS_ERR(connector)) {
+ ret = PTR_ERR(connector);
+ dev_err(hdmi->dev, "Failed to initialize bridge_connector\n");
+ goto err_unbind_bridge;
+ }
-err_bind:
+ return drm_connector_attach_encoder(connector, encoder);
+
+err_unbind_bridge:
+ dw_hdmi_unbind(hdmi->hdmi);
+err_cleanup_encoder:
drm_encoder_cleanup(encoder);
return ret;
--
2.34.1
^ permalink raw reply related
* [PATCH v6 2/3] dt-bindings: media: mediatek-jpeg-encoder: add MT8189 compatible string
From: Jianhua Lin @ 2026-04-03 6:49 UTC (permalink / raw)
To: nicolas, mchehab, robh, krzk+dt, conor+dt, matthias.bgg,
angelogioacchino.delregno
Cc: devicetree, linux-kernel, linux-media, linux-arm-kernel,
linux-mediatek, Project_Global_Chrome_Upstream_Group, sirius.wang,
vince-wl.liu, jh.hsu, Jianhua Lin, Krzysztof Kozlowski
In-Reply-To: <20260403064912.17259-1-jianhua.lin@mediatek.com>
Add the compatible string for the JPEG encoder block found in the
MediaTek MT8189 SoC.
Unlike some previous SoCs, the MT8189 JPEG encoder requires 34-bit IOVA
address space support. Therefore, it is added as a standalone compatible
string without falling back to the generic "mediatek,mtk-jpgenc" to
ensure the driver applies the correct hardware-specific configurations.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jianhua Lin <jianhua.lin@mediatek.com>
---
.../bindings/media/mediatek-jpeg-encoder.yaml | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
index 5b15f8977f67..19948ed25f98 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -14,13 +14,16 @@ description: |-
properties:
compatible:
- items:
+ oneOf:
- enum:
- - mediatek,mt2701-jpgenc
- - mediatek,mt8183-jpgenc
- - mediatek,mt8186-jpgenc
- - mediatek,mt8188-jpgenc
- - const: mediatek,mtk-jpgenc
+ - mediatek,mt8189-jpgenc
+ - items:
+ - enum:
+ - mediatek,mt2701-jpgenc
+ - mediatek,mt8183-jpgenc
+ - mediatek,mt8186-jpgenc
+ - mediatek,mt8188-jpgenc
+ - const: mediatek,mtk-jpgenc
reg:
maxItems: 1
@@ -34,6 +37,10 @@ properties:
items:
- const: jpgenc
+ mediatek,larb:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: a phandle to the smi_larb node.
+
power-domains:
maxItems: 1
--
2.45.2
^ permalink raw reply related
* [PATCH v6 1/3] dt-bindings: media: mediatek-jpeg-decoder: add MT8189 compatible string
From: Jianhua Lin @ 2026-04-03 6:49 UTC (permalink / raw)
To: nicolas, mchehab, robh, krzk+dt, conor+dt, matthias.bgg,
angelogioacchino.delregno
Cc: devicetree, linux-kernel, linux-media, linux-arm-kernel,
linux-mediatek, Project_Global_Chrome_Upstream_Group, sirius.wang,
vince-wl.liu, jh.hsu, Jianhua Lin, Krzysztof Kozlowski
In-Reply-To: <20260403064912.17259-1-jianhua.lin@mediatek.com>
Add the compatible string for the JPEG decoder block found in the
MediaTek MT8189 SoC.
Compared to previous generation ICs, the MT8189 JPEG decoder requires
34-bit IOVA address space support and only needs a single clock
("jpgdec") instead of two. Therefore, it is added as a standalone
compatible string without falling back to older SoCs.
Update the binding schema to include the new compatible string and add
an `allOf` block with conditional checks. This enforces the single clock
requirement for MT8189 while preserving the two-clock requirement
("jpgdec-smi", "jpgdec") for older SoCs.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jianhua Lin <jianhua.lin@mediatek.com>
---
.../bindings/media/mediatek-jpeg-decoder.yaml | 46 +++++++++++++++----
1 file changed, 38 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
index a4aacd3eb189..6596b686980c 100644
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
@@ -15,10 +15,10 @@ description: |-
properties:
compatible:
oneOf:
- - items:
- - enum:
- - mediatek,mt8173-jpgdec
- - mediatek,mt2701-jpgdec
+ - enum:
+ - mediatek,mt2701-jpgdec
+ - mediatek,mt8173-jpgdec
+ - mediatek,mt8189-jpgdec
- items:
- enum:
- mediatek,mt7623-jpgdec
@@ -32,13 +32,20 @@ properties:
maxItems: 1
clocks:
+ minItems: 1
maxItems: 2
- minItems: 2
clock-names:
- items:
- - const: jpgdec-smi
- - const: jpgdec
+ oneOf:
+ - items:
+ - const: jpgdec
+ - items:
+ - const: jpgdec-smi
+ - const: jpgdec
+
+ mediatek,larb:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: a phandle to the smi_larb node.
power-domains:
maxItems: 1
@@ -60,6 +67,29 @@ required:
- power-domains
- iommus
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt8189-jpgdec
+ then:
+ properties:
+ clocks:
+ minItems: 1
+ maxItems: 1
+ clock-names:
+ minItems: 1
+ maxItems: 1
+ else:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+ clock-names:
+ minItems: 2
+ maxItems: 2
+
additionalProperties: false
examples:
--
2.45.2
^ permalink raw reply related
* [PATCH v6 3/3] media: mediatek: jpeg: add compatible for MT8189 SoC
From: Jianhua Lin @ 2026-04-03 6:49 UTC (permalink / raw)
To: nicolas, mchehab, robh, krzk+dt, conor+dt, matthias.bgg,
angelogioacchino.delregno
Cc: devicetree, linux-kernel, linux-media, linux-arm-kernel,
linux-mediatek, Project_Global_Chrome_Upstream_Group, sirius.wang,
vince-wl.liu, jh.hsu, Jianhua Lin
In-Reply-To: <20260403064912.17259-1-jianhua.lin@mediatek.com>
Compared to the previous generation ICs, the MT8189 uses a 34-bit IOVA
address space (16GB) and requires a single clock configuration.
Therefore, add new compatible strings ("mediatek,mt8189-jpgenc" and
"mediatek,mt8189-jpgdec") along with their specific driver data to
support the JPEG encoder and decoder of the MT8189 SoC.
Signed-off-by: Jianhua Lin <jianhua.lin@mediatek.com>
---
.../platform/mediatek/jpeg/mtk_jpeg_core.c | 44 +++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c
index 8c684756d5fc..786cc2942c3a 100644
--- a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c
@@ -1867,6 +1867,10 @@ static struct clk_bulk_data mt8173_jpeg_dec_clocks[] = {
{ .id = "jpgdec" },
};
+static struct clk_bulk_data mtk_jpeg_dec_clocks[] = {
+ { .id = "jpgdec" },
+};
+
static const struct mtk_jpeg_variant mt8173_jpeg_drvdata = {
.clks = mt8173_jpeg_dec_clocks,
.num_clks = ARRAY_SIZE(mt8173_jpeg_dec_clocks),
@@ -1898,6 +1902,38 @@ static const struct mtk_jpeg_variant mtk_jpeg_drvdata = {
.multi_core = false,
};
+static const struct mtk_jpeg_variant mtk8189_jpegenc_drvdata = {
+ .clks = mtk_jpeg_clocks,
+ .num_clks = ARRAY_SIZE(mtk_jpeg_clocks),
+ .formats = mtk_jpeg_enc_formats,
+ .num_formats = MTK_JPEG_ENC_NUM_FORMATS,
+ .qops = &mtk_jpeg_enc_qops,
+ .irq_handler = mtk_jpeg_enc_irq,
+ .hw_reset = mtk_jpeg_enc_reset,
+ .m2m_ops = &mtk_jpeg_enc_m2m_ops,
+ .dev_name = "mtk-jpeg-enc",
+ .ioctl_ops = &mtk_jpeg_enc_ioctl_ops,
+ .out_q_default_fourcc = V4L2_PIX_FMT_YUYV,
+ .cap_q_default_fourcc = V4L2_PIX_FMT_JPEG,
+ .support_34bit = true,
+};
+
+static const struct mtk_jpeg_variant mtk8189_jpegdec_drvdata = {
+ .clks = mtk_jpeg_dec_clocks,
+ .num_clks = ARRAY_SIZE(mtk_jpeg_dec_clocks),
+ .formats = mtk_jpeg_dec_formats,
+ .num_formats = MTK_JPEG_DEC_NUM_FORMATS,
+ .qops = &mtk_jpeg_dec_qops,
+ .irq_handler = mtk_jpeg_dec_irq,
+ .hw_reset = mtk_jpeg_dec_reset,
+ .m2m_ops = &mtk_jpeg_dec_m2m_ops,
+ .dev_name = "mtk-jpeg-dec",
+ .ioctl_ops = &mtk_jpeg_dec_ioctl_ops,
+ .out_q_default_fourcc = V4L2_PIX_FMT_JPEG,
+ .cap_q_default_fourcc = V4L2_PIX_FMT_YUV420M,
+ .support_34bit = true,
+};
+
static struct mtk_jpeg_variant mtk8195_jpegenc_drvdata = {
.formats = mtk_jpeg_enc_formats,
.num_formats = MTK_JPEG_ENC_NUM_FORMATS,
@@ -1937,6 +1973,14 @@ static const struct of_device_id mtk_jpeg_match[] = {
.compatible = "mediatek,mtk-jpgenc",
.data = &mtk_jpeg_drvdata,
},
+ {
+ .compatible = "mediatek,mt8189-jpgenc",
+ .data = &mtk8189_jpegenc_drvdata,
+ },
+ {
+ .compatible = "mediatek,mt8189-jpgdec",
+ .data = &mtk8189_jpegdec_drvdata,
+ },
{
.compatible = "mediatek,mt8195-jpgenc",
.data = &mtk8195_jpegenc_drvdata,
--
2.45.2
^ permalink raw reply related
* [PATCH v6 0/3] Mediatek MT8189 JPEG support
From: Jianhua Lin @ 2026-04-03 6:49 UTC (permalink / raw)
To: nicolas, mchehab, robh, krzk+dt, conor+dt, matthias.bgg,
angelogioacchino.delregno
Cc: devicetree, linux-kernel, linux-media, linux-arm-kernel,
linux-mediatek, Project_Global_Chrome_Upstream_Group, sirius.wang,
vince-wl.liu, jh.hsu, Jianhua Lin
This series is based on tag: next-20260327, linux-next/master
Changes compared with v5:
- Patches 1/3 (dt-bindings: decoder):
- Drop top-level minItems/maxItems for clock-names per Krzysztof's
review.
- Refine allOf block to strictly enforce clock constraints.
Changes compared with v4:
- Refines the device tree bindings for JPEG decoder and encoder.
- Patches 1/3 (dt-bindings: decoder):
Moved the standalone compatible string mediatek,mt8189-jpgdec
into the first oneOf entry along with mt2701 and mt8173, as
suggested by Rob Herring. This correctly groups all independent
ICs and removes the redundant items wrapper.
- Patches 2/3 (dt-bindings: encoder):
Applied the same logic suggested by Rob Herring to the encoder
binding. Restructured the compatible property to clearly
distinguish between the standalone IC (mediatek,mt8189-jpgenc)
and the ICs that must fallback to mediatek,mtk-jpgenc.
Changes compared with v3:
- The v4 is resending the cover-letter, because the v3 cover-letter was
not sent successfully.
Changes compared with v2:
- Dropped the dts patch (arm64: dts: mt8188: update JPEG encoder/decoder
compatible) as it belongs to a different tree/series.
- Patches 1/3 (dt-bindings: decoder):
- Changed the MT8189 compatible to be a standalone `const` instead of
an `enum`.
- Added an `allOf` block with conditional checks to enforce the single
clock ("jpgdec") requirement for MT8189, while preserving the
two-clock requirement for older SoCs.
- Updated commit message to reflect the schema structure changes and
hardware differences.
- Patches 2/3 (dt-bindings: encoder):
- Changed the MT8189 compatible to be a standalone `const` instead of
an `enum` inside the `items` list, as it does not fallback to
"mediatek,mtk-jpgenc" due to 34-bit IOVA requirements.
- Updated commit message to explain the standalone compatible design.
- Patches 3/3 (media: mediatek: jpeg):
- Refined commit message for better clarity regarding 34-bit IOVA and
single clock configuration.
Changes compared with v1:
- Patches 1/4:
- Updating commit message
- Patches 2/4, 3/4:
- Updating commit message
- Adjusted property descriptions acorrding to hardware requirements
- Improved formatting for better readability and consistency
- Patches 4/4:
- Updating commit message
Jianhua Lin (3):
dt-bindings: media: mediatek-jpeg-decoder: add MT8189 compatible
string
dt-bindings: media: mediatek-jpeg-encoder: add MT8189 compatible
string
media: mediatek: jpeg: add compatible for MT8189 SoC
.../bindings/media/mediatek-jpeg-decoder.yaml | 46 +++++++++++++++----
.../bindings/media/mediatek-jpeg-encoder.yaml | 19 +++++---
.../platform/mediatek/jpeg/mtk_jpeg_core.c | 44 ++++++++++++++++++
3 files changed, 95 insertions(+), 14 deletions(-)
--
2.45.2
^ permalink raw reply
* Re: [PATCH 0/5] crc64: Tweak intrinsics code and enable it for ARM
From: Ard Biesheuvel @ 2026-04-03 6:49 UTC (permalink / raw)
To: Eric Biggers; +Cc: linux-crypto, linux-arm-kernel, Demian Shulhan
In-Reply-To: <20260402234028.GA2256@sol>
On Fri, 3 Apr 2026, at 01:40, Eric Biggers wrote:
> On Thu, Apr 02, 2026 at 10:52:17AM +0200, Ard Biesheuvel wrote:
>>
>> On Wed, 1 Apr 2026, at 21:59, Eric Biggers wrote:
>> > On Mon, Mar 30, 2026 at 04:46:31PM +0200, Ard Biesheuvel wrote:
>> >> Apply some tweaks to the new arm64 crc64 NEON intrinsics code, and wire
>> >> it up for the 32-bit ARM build. Note that true 32-bit ARM CPUs usually
>> >> don't implement the prerequisite 64x64 PMULL instructions, but 32-bit
>> >> kernels are commonly used on 64-bit capable hardware too, which do
>> >> implement the 32-bit versions of the crypto instructions if they are
>> >> implemented for the 64-bit ISA (as per the architecture).
>> >>
>> >> Cc: Demian Shulhan <demyansh@gmail.com>
>> >> Cc: Eric Biggers <ebiggers@kernel.org>
>> >>
>> >> Ard Biesheuvel (5):
>> >> lib/crc: arm64: Drop unnecessary chunking logic from crc64
>> >> lib/crc: arm64: Use existing macros for kernel-mode FPU cflags
>> >> ARM: Add a neon-intrinsics.h header like on arm64
>> >> lib/crc: arm64: Simplify intrinsics implementation
>> >> lib/crc: arm: Enable arm64's NEON intrinsics implementation of crc64
>> >
>> > I think patches 3 and 4 should be swapped, so it's cleanups first (which
>> > make sense regardless of the 32-bit ARM support) and then the 32-bit ARM
>> > support.
>> >
>>
>> Ok.
>
> I can also apply patches 1-2 and 4 now if you want. Let me know if I
> should do that or if a new version is coming.
>
Yes, good idea. I'll take care of the ARM stuff next cycle.
^ permalink raw reply
* Re: [PATCH v5 3/3] arm64,ppc64le/kdump: pass dm-crypt keys to kdump kernel
From: Andrew Morton @ 2026-04-03 6:31 UTC (permalink / raw)
To: Sourabh Jain
Cc: Coiby Xu, kexec, linux-arm-kernel, linuxppc-dev, devicetree,
Arnaud Lefebvre, Baoquan he, Dave Young, Kairui Song, Pingfan Liu,
Krzysztof Kozlowski, Rob Herring, Thomas Staudt, Will Deacon,
Christophe Leroy (CS GROUP), Catalin Marinas, Madhavan Srinivasan,
Michael Ellerman, Nicholas Piggin, Saravana Kannan, open list
In-Reply-To: <51761fcf-955f-45e2-97a5-2b49d8e79d04@linux.ibm.com>
On Thu, 2 Apr 2026 16:24:14 +0530 Sourabh Jain <sourabhjain@linux.ibm.com> wrote:
> But while reading crash_load_dm_crypt_keys() I noticed a possibility of a
> double free at the address pointed by `keys_header`:
>
> In crash_load_dm_crypt_keys()/crash_dump_dm_crypt.c
> snip...
>
> kbuf.buffer = keys_header;
>
> snip....
>
> r = kexec_add_buffer(&kbuf);
> if (r) {
> pr_err("Failed to call kexec_add_buffer, ret=%d\n", r);
> kvfree((void *)kbuf.buffer); <---
> First Free
> return r;
> }
>
> Since `keys_header` is not reset, the next call to build_keys_header()
> will cause a double free at `keys_header`.
>
> static int build_keys_header(void)
> {
>
> snip...
>
> if (keys_header != NULL)
> kvfree(keys_header);
>
> snip...
> }
>
> What do you think?
It looks that way to me.
^ permalink raw reply
* Re: [PATCH net v4 0/2] stmmac crash/stall fixes when under memory pressure
From: Maxime Chevallier @ 2026-04-03 6:14 UTC (permalink / raw)
To: Russell King (Oracle), Sam Edwards
Cc: Andrew Lunn, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Maxime Coquelin, Alexandre Torgue, Ovidiu Panait,
Vladimir Oltean, Baruch Siach, Serge Semin, Giuseppe Cavallaro,
netdev, linux-stm32, linux-arm-kernel, linux-kernel
In-Reply-To: <ac6kfQ98Xjt3dCGj@shell.armlinux.org.uk>
Hi Russell
On 02/04/2026 19:16, Russell King (Oracle) wrote:
> On Tue, Mar 31, 2026 at 09:19:27PM -0700, Sam Edwards wrote:
>> Hi netdev,
>>
>> This is v4 of my series containing a pair of bugfixes for the stmmac driver's
>> receive pipeline. These issues occur when stmmac_rx_refill() does not (fully)
>> succeed, which happens more frequently when free memory is low.
>>
>> The first patch closes Bugzilla bug #221010 [1], where stmmac_rx() can circle
>> around to a still-dirty descriptor (with a NULL buffer pointer), mistake it for
>> a filled descriptor (due to OWN=0), and attempt to dereference the buffer.
>>
>> In testing that patch, I discovered a second issue: starvation of available RX
>> buffers causes the NIC to stop sending interrupts; if the driver stops polling,
>> it will wait indefinitely for an interrupt that will never come. (Note: the
>> first patch makes this issue more prominent -- mostly because it lets the
>> system survive long enough to exhibit it -- but doesn't *cause* it.) The second
>> patch addresses that problem as well.
>>
>> Both patches are minimal, appropriate for stable, and designated to `net`. My
>> focus is on small, obviously-correct, easy-to-explain changes: I'll follow up
>> with another patch/series (something like [2]) for `net-next` that fixes the
>> ring in a more robust way.
>>
>> The tx and zc paths seem to have similar low-memory bugs, to be addressed in
>> separate series.
>
> I've tested this on my Jetson Xavier platform. One of the issues I've
> had is that running iperf3 results in the receive side stalling because
> it runs out of descriptors. However, despite the receive ring
> eventually being re-filled and the hardware appropriately prodded, it
> steadfastly refuses to restart, despite the descriptors having been
> updated.
>
> What I can see is there's 40 packets in the internal FIFOs via the
> PRXQ[13:0] field of the ETH_MTLRXQxDR register.
>
> With your patches applied:
>
> root@tegra-ubuntu:~# iperf3 -c 192.168.248.1 -R
> Connecting to host 192.168.248.1, port 5201
> Reverse mode, remote host 192.168.248.1 is sending
> [ 5] local 192.168.248.174 port 43728 connected to 192.168.248.1 port 5201
> [ ID] Interval Transfer Bitrate
> [ 5] 0.00-1.00 sec 30.3 MBytes 254 Mbits/sec
> [ 5] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec
> [ 5] 2.00-3.00 sec 0.00 Bytes 0.00 bits/sec
> [ 5] 3.00-4.00 sec 0.00 Bytes 0.00 bits/sec
> [ 5] 4.00-5.00 sec 0.00 Bytes 0.00 bits/sec
> [ 5] 5.00-6.00 sec 0.00 Bytes 0.00 bits/sec
> ...
Ah !!
I have been struggling with that problem this week too. I stumbled upon
it while trying to test your TSO series, and at firts I thought it was
because of the TSO patches, but turns out it's not, I reproduce it on
net-next.
The main problem for me is that it's not always reproducible, it may or
may not show up when I run iperf3 after a fresh restart.
This is on socfpga (dwmac1000), so it seems the problem exists across IP
versions.
I've been on and off trying to make progress on that during the week,
but without success so far...
Maxime
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox