* [PATCH bpf-next v11 5/5] bpf, arm64: Emit BTI for indirect jump target
From: Xu Kuohai @ 2026-04-03 9:09 UTC (permalink / raw)
To: bpf, linux-kernel, linux-arm-kernel
Cc: Alexei Starovoitov, Daniel Borkmann, Andrii Nakryiko,
Martin KaFai Lau, Eduard Zingerman, Yonghong Song, Puranjay Mohan,
Anton Protopopov, Alexis Lothoré, Shahab Vahedi,
Russell King, Tiezhu Yang, Hengqi Chen, Johan Almbladh,
Paul Burton, Hari Bathini, Christophe Leroy, Naveen N Rao,
Luke Nelson, Xi Wang, Björn Töpel, Pu Lehui,
Ilya Leoshkevich, Heiko Carstens, Vasily Gorbik, David S . Miller,
Wang YanQing
In-Reply-To: <20260403090915.473493-1-xukuohai@huaweicloud.com>
From: Xu Kuohai <xukuohai@huawei.com>
On CPUs that support BTI, the indirect jump selftest triggers a kernel
panic because there is no BTI instructions at the indirect jump targets.
Fix it by emitting a BTI instruction for each indirect jump target.
For reference, below is a sample panic log.
Internal error: Oops - BTI: 0000000036000003 [#1] SMP
...
Call trace:
bpf_prog_2e5f1c71c13ac3e0_big_jump_table+0x54/0xf8 (P)
bpf_prog_run_pin_on_cpu+0x140/0x468
bpf_prog_test_run_syscall+0x280/0x3b8
bpf_prog_test_run+0x22c/0x2c0
Fixes: f4a66cf1cb14 ("bpf: arm64: Add support for indirect jumps")
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
---
arch/arm64/net/bpf_jit_comp.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index 7212ec89dfe3..aa5cd240cdda 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1198,8 +1198,8 @@ static int add_exception_handler(const struct bpf_insn *insn,
* >0 - successfully JITed a 16-byte eBPF instruction.
* <0 - failed to JIT.
*/
-static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
- bool extra_pass)
+static int build_insn(const struct bpf_verifier_env *env, const struct bpf_insn *insn,
+ struct jit_ctx *ctx, bool extra_pass)
{
const u8 code = insn->code;
u8 dst = bpf2a64[insn->dst_reg];
@@ -1224,6 +1224,9 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
int ret;
bool sign_extend;
+ if (bpf_insn_is_indirect_target(env, ctx->prog, i))
+ emit_bti(A64_BTI_J, ctx);
+
switch (code) {
/* dst = src */
case BPF_ALU | BPF_MOV | BPF_X:
@@ -1899,7 +1902,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
return 0;
}
-static int build_body(struct jit_ctx *ctx, bool extra_pass)
+static int build_body(struct bpf_verifier_env *env, struct jit_ctx *ctx, bool extra_pass)
{
const struct bpf_prog *prog = ctx->prog;
int i;
@@ -1918,7 +1921,7 @@ static int build_body(struct jit_ctx *ctx, bool extra_pass)
int ret;
ctx->offset[i] = ctx->idx;
- ret = build_insn(insn, ctx, extra_pass);
+ ret = build_insn(env, insn, ctx, extra_pass);
if (ret > 0) {
i++;
ctx->offset[i] = ctx->idx;
@@ -2079,7 +2082,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_verifier_env *env, struct bpf_pr
if (build_prologue(&ctx, was_classic))
goto out_off;
- if (build_body(&ctx, extra_pass))
+ if (build_body(env, &ctx, extra_pass))
goto out_off;
ctx.epilogue_offset = ctx.idx;
@@ -2127,7 +2130,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_verifier_env *env, struct bpf_pr
/* Dont write body instructions to memory for now */
ctx.write = false;
- if (build_body(&ctx, extra_pass))
+ if (build_body(env, &ctx, extra_pass))
goto out_free_hdr;
ctx.epilogue_offset = ctx.idx;
@@ -2136,7 +2139,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_verifier_env *env, struct bpf_pr
ctx.write = true;
/* Pass 3: Adjust jump offset and write final image */
- if (build_body(&ctx, extra_pass) ||
+ if (build_body(env, &ctx, extra_pass) ||
WARN_ON_ONCE(ctx.idx != ctx.epilogue_offset))
goto out_free_hdr;
--
2.43.0
^ permalink raw reply related
* Re: [PATCH 6/6] ARM: dts: renesas: rskrza1: Drop superfluous cells
From: Geert Uytterhoeven @ 2026-04-03 9:24 UTC (permalink / raw)
To: Marek Vasut
Cc: linux-arm-kernel, Conor Dooley, Krzysztof Kozlowski, Magnus Damm,
Rob Herring, devicetree, linux-kernel, linux-renesas-soc
In-Reply-To: <20260327234244.91707-7-marek.vasut+renesas@mailbox.org>
On Sat, 28 Mar 2026 at 00:43, Marek Vasut
<marek.vasut+renesas@mailbox.org> wrote:
> Drop superfluous address-cells and size-cells to fix DTC warning:
> "
> arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts:32.17-72.4: Warning (avoid_unnecessary_addr_size): /flash@18000000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" or "ranges" property
> "
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
My bad...
Fixes: 98537eb77d3ef185 ("ARM: dts: renesas: rskrza1: Add FLASH nodes")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v7.2.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Re: [PATCH 5/6] ARM: dts: renesas: genmai: Drop superfluous cells
From: Geert Uytterhoeven @ 2026-04-03 9:23 UTC (permalink / raw)
To: Marek Vasut
Cc: linux-arm-kernel, Conor Dooley, Krzysztof Kozlowski, Magnus Damm,
Rob Herring, devicetree, linux-kernel, linux-renesas-soc
In-Reply-To: <20260327234244.91707-6-marek.vasut+renesas@mailbox.org>
On Sat, 28 Mar 2026 at 00:43, Marek Vasut
<marek.vasut+renesas@mailbox.org> wrote:
> Drop superfluous address-cells and size-cells to fix DTC warning:
> "
> arch/arm/boot/dts/renesas/r7s72100-genmai.dts:28.17-55.4: Warning (avoid_unnecessary_addr_size): /flash@18000000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" or "ranges" property
> "
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
My bad...
Fixes: 30e0a8cf886cb459 ("ARM: dts: renesas: genmai: Add FLASH nodes")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v7.2.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Re: [PATCH 4/6] ARM: dts: renesas: r7s72100: Add missing unit to bus node
From: Geert Uytterhoeven @ 2026-04-03 9:22 UTC (permalink / raw)
To: Marek Vasut
Cc: linux-arm-kernel, Conor Dooley, Krzysztof Kozlowski, Magnus Damm,
Rob Herring, devicetree, linux-kernel, linux-renesas-soc
In-Reply-To: <20260327234244.91707-5-marek.vasut+renesas@mailbox.org>
On Sat, 28 Mar 2026 at 00:43, Marek Vasut
<marek.vasut+renesas@mailbox.org> wrote:
> Add missing unit to bus node to fix the following DTC warning:
> "
> arch/arm/boot/dts/renesas/r7s72100.dtsi:40.11-46.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name
> "
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v7.2.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Re: [PATCH 3/6] ARM: dts: renesas: r8a7792: Add missing unit to bus node
From: Geert Uytterhoeven @ 2026-04-03 9:22 UTC (permalink / raw)
To: Marek Vasut
Cc: linux-arm-kernel, Conor Dooley, Krzysztof Kozlowski, Magnus Damm,
Rob Herring, devicetree, linux-kernel, linux-renesas-soc
In-Reply-To: <20260327234244.91707-4-marek.vasut+renesas@mailbox.org>
On Sat, 28 Mar 2026 at 00:43, Marek Vasut
<marek.vasut+renesas@mailbox.org> wrote:
> Add missing unit to bus node to fix the following DTC warning:
> "
> arch/arm/boot/dts/renesas/r8a7792.dtsi:89.12-94.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name
> "
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v7.2.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Re: [PATCH 2/6] ARM: dts: renesas: r8a7779: Add missing unit to bus node
From: Geert Uytterhoeven @ 2026-04-03 9:22 UTC (permalink / raw)
To: Marek Vasut
Cc: linux-arm-kernel, Conor Dooley, Krzysztof Kozlowski, Magnus Damm,
Rob Herring, devicetree, linux-kernel, linux-renesas-soc
In-Reply-To: <20260327234244.91707-3-marek.vasut+renesas@mailbox.org>
On Sat, 28 Mar 2026 at 00:43, Marek Vasut
<marek.vasut+renesas@mailbox.org> wrote:
> Add missing unit to bus node to fix the following DTC warning:
> "
> arch/arm/boot/dts/renesas/r8a7779.dtsi:707.12-712.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name
> "
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v7.2.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Re: [PATCH 1/6] ARM: dts: renesas: r8a7778: Add missing unit to bus node
From: Geert Uytterhoeven @ 2026-04-03 9:21 UTC (permalink / raw)
To: Marek Vasut
Cc: linux-arm-kernel, Conor Dooley, Krzysztof Kozlowski, Magnus Damm,
Rob Herring, devicetree, linux-kernel, linux-renesas-soc
In-Reply-To: <20260327234244.91707-2-marek.vasut+renesas@mailbox.org>
Hi Marek,
On Sat, 28 Mar 2026 at 00:42, Marek Vasut
<marek.vasut+renesas@mailbox.org> wrote:
> Add missing unit to bus node to fix the following DTC warning:
> "
> arch/arm/boot/dts/renesas/r8a7778.dtsi:43.12-48.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name
> "
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v7.2.
> --- a/arch/arm/boot/dts/renesas/r8a7778.dtsi
> +++ b/arch/arm/boot/dts/renesas/r8a7778.dtsi
> @@ -40,7 +40,7 @@ aliases {
> spi2 = &hspi2;
> };
>
> - lbsc: bus {
> + lbsc: bus@0 {
Note for the future: if we ever add proper LBSC support (including its
own compatible value and reg property), this should be changed to the
address in the reg property. This applies to the first four patches.
> compatible = "simple-bus";
> #address-cells = <1>;
> #size-cells = <1>;
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Re: [PATCH] arm64: pi: validate bootargs before parsing them
From: Will Deacon @ 2026-04-03 9:09 UTC (permalink / raw)
To: Pengpeng Hou; +Cc: Catalin Marinas, linux-arm-kernel, linux-kernel, robh, ardb
In-Reply-To: <20260403143004.4-arm64-pi-bootargs-pengpeng@iscas.ac.cn>
On Fri, Apr 03, 2026 at 11:56:05AM +0800, Pengpeng Hou wrote:
> get_bootargs_cmdline() fetches the raw bootargs property from the FDT
> and immediately calls strlen() on it before later passing the same
> pointer into the early command-line parser. Flat DT properties are
> external boot input, and this path does not prove that bootargs is
> NUL-terminated within its declared bounds.
>
> Use fdt_stringlist_get() so malformed unterminated bootargs are
> rejected before the local parser treats them as C strings.
>
> Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
> ---
> arch/arm64/kernel/pi/idreg-override.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/kernel/pi/idreg-override.c b/arch/arm64/kernel/pi/idreg-override.c
> index bc57b290e5e7..310ed279ef26 100644
> --- a/arch/arm64/kernel/pi/idreg-override.c
> +++ b/arch/arm64/kernel/pi/idreg-override.c
> @@ -373,11 +373,11 @@ static __init const u8 *get_bootargs_cmdline(const void *fdt, int node)
> if (node < 0)
> return NULL;
>
> - prop = fdt_getprop(fdt, node, bootargs, NULL);
> + prop = fdt_stringlist_get(fdt, node, bootargs, 0, NULL);
> if (!prop)
> return NULL;
>
> - return strlen(prop) ? prop : NULL;
> + return *prop ? prop : NULL;
> }
I'm not exactly sure why we need to go out of our way to handle a
malformed DT at this stage, tbh. If it's corrupted in other ways (e.g.
random ASCII replacement) then we're probably still going to crash and
burn. There's nothing particularly special about NUL terminators.
If we _do_ decide that this is worth fixing, what about the other
early callers of fdt_getprop (kaslr, EFI stub)?
Will
^ permalink raw reply
* Re: [PATCH 4/4] arm64: dts: renesas: rzg2l-smarc: Fix missing cells and reg into DU subnode
From: Geert Uytterhoeven @ 2026-04-03 9:03 UTC (permalink / raw)
To: Marek Vasut
Cc: linux-arm-kernel, Conor Dooley, Krzysztof Kozlowski, Magnus Damm,
Rob Herring, devicetree, linux-kernel, linux-renesas-soc
In-Reply-To: <20260326042411.215241-5-marek.vasut+renesas@mailbox.org>
On Thu, 26 Mar 2026 at 05:24, Marek Vasut
<marek.vasut+renesas@mailbox.org> wrote:
> Add missing cells and reg DT property into DU subnode to fix
> the following warning:
>
> "
> arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi:29.10-33.5: Warning (unit_address_vs_reg): /fragment@1/__overlay__/ports/port@0: node has a unit name, but no reg or ranges property
> "
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v7.2.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Re: [PATCH 3/4] arm64: dts: renesas: rzg2l-smarc: Fix missing cells and reg into CSI2 subnode
From: Geert Uytterhoeven @ 2026-04-03 9:03 UTC (permalink / raw)
To: Marek Vasut
Cc: linux-arm-kernel, Conor Dooley, Krzysztof Kozlowski, Magnus Damm,
Rob Herring, devicetree, linux-kernel, linux-renesas-soc
In-Reply-To: <20260326042411.215241-4-marek.vasut+renesas@mailbox.org>
On Thu, 26 Mar 2026 at 05:24, Marek Vasut
<marek.vasut+renesas@mailbox.org> wrote:
> Add missing cells and reg DT property into CSI2 subnode to fix
> the following warning:
>
> "
> arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi:49.10-55.5: Warning (unit_address_vs_reg): /fragment@2/__overlay__/ports/port@0: node has a unit name, but no reg or ranges property
> "
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v7.2.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Re: [PATCH 2/4] arm64: dts: renesas: Fix missing cells and reg in Salvator-X panel DTO
From: Geert Uytterhoeven @ 2026-04-03 9:02 UTC (permalink / raw)
To: Marek Vasut
Cc: linux-arm-kernel, Conor Dooley, Krzysztof Kozlowski, Magnus Damm,
Rob Herring, devicetree, linux-kernel, linux-renesas-soc
In-Reply-To: <20260326042411.215241-3-marek.vasut+renesas@mailbox.org>
On Thu, 26 Mar 2026 at 05:24, Marek Vasut
<marek.vasut+renesas@mailbox.org> wrote:
> Add missing cells and reg DT property into Salvator-X panel DTO to fix
> the following warning:
>
> "
> arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso:30.10-34.5: Warning (unit_address_vs_reg): /fragment@2/__overlay__/ports/port@1: node has a unit name, but no reg or ranges property
> "
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v7.2.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Re: [PATCH 1/4] arm64: dts: renesas: Fix missing cells and reg in Draak/Ebisu panel DTO
From: Geert Uytterhoeven @ 2026-04-03 9:01 UTC (permalink / raw)
To: Marek Vasut
Cc: linux-arm-kernel, Conor Dooley, Krzysztof Kozlowski, Magnus Damm,
Rob Herring, devicetree, linux-kernel, linux-renesas-soc
In-Reply-To: <20260326042411.215241-2-marek.vasut+renesas@mailbox.org>
On Thu, 26 Mar 2026 at 05:24, Marek Vasut
<marek.vasut+renesas@mailbox.org> wrote:
> Add missing cells and reg DT property into Draak/Ebisu panel DTO to fix
> the following warning:
>
> "
> arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso:30.10-34.5: Warning (unit_address_vs_reg): /fragment@2/__overlay__/ports/port@1: node has a unit name, but no reg or ranges property
> "
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
i.e. will queue in renesas-devel for v7.2.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* Re: [PATCH v3] coresight: etm3x: Fix cntr_val_show() to match cntr_val_store() behavior
From: Kuan-Wei Chiu @ 2026-04-03 8:57 UTC (permalink / raw)
To: Suzuki K Poulose
Cc: James Clark, mike.leach, alexander.shishkin, gregkh,
mathieu.poirier, leo.yan, Al.Grant, jserv, marscheng, ericchancf,
milesjiang, nickpan, coresight, linux-arm-kernel, linux-kernel,
stable
In-Reply-To: <bb521240-ab53-4c5a-aa1d-6b140ed4262e@arm.com>
Hi Suzuki,
On Mon, Feb 02, 2026 at 09:33:59AM +0000, Suzuki K Poulose wrote:
> Hello
>
> On 02/02/2026 05:09, Kuan-Wei Chiu wrote:
> > On Tue, Dec 02, 2025 at 09:26:19AM +0000, James Clark wrote:
> > >
> > >
> > > On 02/12/2025 8:26 am, Kuan-Wei Chiu wrote:
> > > > The cntr_val_show() function was intended to print the values of all
> > > > counters using a loop. However, due to a buffer overwrite issue with
> > > > sprintf(), it effectively only displayed the value of the last counter.
> > > >
> > > > The companion function, cntr_val_store(), allows users to modify a
> > > > specific counter selected by 'cntr_idx'. To maintain consistency
> > > > between read and write operations and to align with the ETM4x driver
> > > > behavior, modify cntr_val_show() to report only the value of the
> > > > currently selected counter.
> > > >
> > > > This change removes the loop and the "counter %d:" prefix, printing
> > > > only the hexadecimal value. It also adopts sysfs_emit() for standard
> > > > sysfs output formatting.
> > > >
> > > > Fixes: a939fc5a71ad ("coresight-etm: add CoreSight ETM/PTM driver")
> > > > Cc: stable@vger.kernel.org
> > > > Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
> > > > ---
> > > > Build test only.
> > > >
> > > > Changes in v3:
> > > > - Switch format specifier to %#x to include the 0x prefix.
> > > > - Add Cc stable
> > > >
> > > > v2: https://lore.kernel.org/lkml/20251201095228.1905489-1-visitorckw@gmail.com/
> > > >
> > > > .../hwtracing/coresight/coresight-etm3x-sysfs.c | 15 ++++-----------
> > > > 1 file changed, 4 insertions(+), 11 deletions(-)
> > > >
> > > > diff --git a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
> > > > index 762109307b86..b3c67e96a82a 100644
> > > > --- a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
> > > > +++ b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
> > > > @@ -717,26 +717,19 @@ static DEVICE_ATTR_RW(cntr_rld_event);
> > > > static ssize_t cntr_val_show(struct device *dev,
> > > > struct device_attribute *attr, char *buf)
> > > > {
> > > > - int i, ret = 0;
> > > > u32 val;
> > > > struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent);
> > > > struct etm_config *config = &drvdata->config;
> > > > if (!coresight_get_mode(drvdata->csdev)) {
> > > > spin_lock(&drvdata->spinlock);
> > > > - for (i = 0; i < drvdata->nr_cntr; i++)
> > > > - ret += sprintf(buf, "counter %d: %x\n",
> > > > - i, config->cntr_val[i]);
> > > > + val = config->cntr_val[config->cntr_idx];
> > > > spin_unlock(&drvdata->spinlock);
> > > > - return ret;
> > > > - }
> > > > -
> > > > - for (i = 0; i < drvdata->nr_cntr; i++) {
> > > > - val = etm_readl(drvdata, ETMCNTVRn(i));
> > > > - ret += sprintf(buf, "counter %d: %x\n", i, val);
> > > > + } else {
> > > > + val = etm_readl(drvdata, ETMCNTVRn(config->cntr_idx));
> > > > }
> > > > - return ret;
> > > > + return sysfs_emit(buf, "%#x\n", val);
> > > > }
> > > > static ssize_t cntr_val_store(struct device *dev,
> > >
> > > Reviewed-by: James Clark <james.clark@linaro.org>
> > >
> > Thanks for the review!
> > Is there anything else I need to do for this fix to land?
>
> Thanks for the patch, I will queue this for the next release (v7.1).
>
Just a gentle ping.
Since the v7.1 merge window is presumably opening in about a week, I
noticed this patch isn't in linux-next yet and wanted to send a quick
reminder. Thanks.
Regards,
Kuan-Wei
^ permalink raw reply
* Re: [PATCH v5 23/27] clk: mediatek: Add MT8196 disp-ao clock support
From: Jason-JH Lin (林睿祥) @ 2026-04-03 8:54 UTC (permalink / raw)
To: Laura Nao
Cc: Guangjie Song (宋光杰), robh@kernel.org,
kernel@collabora.com, Sirius Wang (王皓昱),
Nancy Lin (林欣螢), AngeloGioacchino Del Regno,
linux-mediatek@lists.infradead.org, conor+dt@kernel.org,
Paul-pl Chen (陳柏霖),
linux-kernel@vger.kernel.org,
Project_Global_Chrome_Upstream_Group, devicetree@vger.kernel.org,
richardcochran@gmail.com, krzk+dt@kernel.org,
mturquette@baylibre.com, Nicolas Prado, p.zabel@pengutronix.de,
Singo Chang (張興國), wenst@chromium.org,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
linux-clk@vger.kernel.org, matthias.bgg@gmail.com,
sboyd@kernel.org
In-Reply-To: <20260402100538.27291-1-laura.nao@collabora.com>
[snip]
> > > +static const struct of_device_id of_match_clk_mt8196_vdisp_ao[]
> > > = {
> > > + { .compatible = "mediatek,mt8196-vdisp-ao", .data =
> > > &mm_v_mcd },
> >
> > Hi Laura,
> >
> > We are going to send mtk-mmsys driver for MT8196 recently, but we
> > found
> > the compatible name is used here.
> >
> > As your commit message, vdisp-ao is integrated with the mtk-mmsys
> > driver, which registers the vdisp-ao clock driver via
> > platform_device_register_data().
> >
> > Shouldn't this compatible name belong to mmsys driver for MT8196?
> >
>
> That's right, my fault for missing that! Thanks for the heads up.
>
> I'm aware Angelo is currently restructuring mediatek-drm (including
> mmsys and mutex), and that might affect the way vdisp-ao is loaded
> too.
> So I'm not sure whether it makes sense to send a patch to fix this
> right away.
OK, we'll try to contact Angelo from other places.
Thanks for your confirmation!
Regards,
Jason-JH.Lin
>
> Best,
>
> Laura
>
^ permalink raw reply
* Re: [EXT] [PATCH v1 resend 0/7] Timer driver module support
From: Daniel Lezcano @ 2026-04-03 8:50 UTC (permalink / raw)
To: Zhipeng Wang, Daniel Lezcano, tglx@kernel.org
Cc: shawnguo@kernel.org, jstultz@google.com,
linux-kernel@vger.kernel.org, Matthias Brugger,
AngeloGioacchino Del Regno,
moderated list:ARM/Mediatek SoC support,
moderated list:ARM/Mediatek SoC support
In-Reply-To: <AS8PR04MB842096EB48B0B607711702EEEB5EA@AS8PR04MB8420.eurprd04.prod.outlook.com>
Hi Zhipeng,
On 4/3/26 09:59, Zhipeng Wang wrote:
>
[ ... ]
>> 2.43.0
> Hi Daniel,
>
> Apologies for the delayed response. Thank you for working on the timer driver module support series. I've
> tested your patches on i.MX platforms and they work well with the TPM
> timer driver.
>
> Based on your framework, I've converted the i.MX TPM timer driver to
> use TIMER_PDEV_DECLARE. The driver has been tested on:
> - i.MX7ULP (ARM, no alternative timer): built-in with CONFIG_EARLY_TIMER=y
> - i.MX8ULP (ARM64, has ARM Generic Timer): built-in, module, and
> CONFIG_EARLY_TIMER=y configurations
>
> All test cases passed without issues.
thanks for testing
I'll apply patch 2 and 3 and send a v2 for the next release and wait for
more comments.
-- Daniel
[ ... ]
^ permalink raw reply
* [PATCH 0/3] firmware: arm_scmi: Miscellaneous improvements
From: Geert Uytterhoeven @ 2026-04-03 8:41 UTC (permalink / raw)
To: Sudeep Holla, Cristian Marussi, Marek Vasut
Cc: arm-scmi, linux-arm-kernel, linux-renesas-soc, Geert Uytterhoeven
Hi all,
This patch series contains miscellaneous improvements for SCMI quirk
handling and SCMI instance iteration.
Thanks for your comments!
Geert Uytterhoeven (3):
firmware: arm_scmi: quirk: Improve quirk range parsing
firmware: arm_scmi: quirk: Simplify quirk table iteration
firmware: arm_scmi: Convert to list_for_each_entry()
drivers/firmware/arm_scmi/driver.c | 4 +---
drivers/firmware/arm_scmi/quirks.c | 15 ++++++---------
2 files changed, 7 insertions(+), 12 deletions(-)
--
2.43.0
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply
* [PATCH 2/3] firmware: arm_scmi: quirk: Simplify quirk table iteration
From: Geert Uytterhoeven @ 2026-04-03 8:41 UTC (permalink / raw)
To: Sudeep Holla, Cristian Marussi, Marek Vasut
Cc: arm-scmi, linux-arm-kernel, linux-renesas-soc, Geert Uytterhoeven
In-Reply-To: <cover.1775205358.git.geert+renesas@glider.be>
The current table entry is assigned in both the init and loop
expressions of the for-statement. Merge this into a single assignment
in the conditional expression, to simplify the code.
While at it, make the loop counter unsigned and loop-local.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/firmware/arm_scmi/quirks.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/firmware/arm_scmi/quirks.c b/drivers/firmware/arm_scmi/quirks.c
index b1d9cd9fa2427879..2b38ba3f59a13c9e 100644
--- a/drivers/firmware/arm_scmi/quirks.c
+++ b/drivers/firmware/arm_scmi/quirks.c
@@ -258,10 +258,8 @@ static int scmi_quirk_range_parse(struct scmi_quirk *quirk)
void scmi_quirks_initialize(void)
{
struct scmi_quirk *quirk;
- int i;
- for (i = 0, quirk = scmi_quirks_table[0]; quirk;
- i++, quirk = scmi_quirks_table[i]) {
+ for (unsigned int i = 0; (quirk = scmi_quirks_table[i]); i++) {
int ret;
ret = scmi_quirk_range_parse(quirk);
--
2.43.0
^ permalink raw reply related
* [PATCH 3/3] firmware: arm_scmi: Convert to list_for_each_entry()
From: Geert Uytterhoeven @ 2026-04-03 8:41 UTC (permalink / raw)
To: Sudeep Holla, Cristian Marussi, Marek Vasut
Cc: arm-scmi, linux-arm-kernel, linux-renesas-soc, Geert Uytterhoeven
In-Reply-To: <cover.1775205358.git.geert+renesas@glider.be>
Simplify the loop in scmi_handle_get() by using list_for_each_entry().
Suggested-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/firmware/arm_scmi/driver.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 57785c0c04241e46..b1bba2c61b728b56 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -2584,13 +2584,11 @@ static bool scmi_is_transport_atomic(const struct scmi_handle *handle,
*/
static struct scmi_handle *scmi_handle_get(struct device *dev)
{
- struct list_head *p;
struct scmi_info *info;
struct scmi_handle *handle = NULL;
mutex_lock(&scmi_list_mutex);
- list_for_each(p, &scmi_list) {
- info = list_entry(p, struct scmi_info, node);
+ list_for_each_entry(info, &scmi_list, node) {
if (dev->parent == info->dev) {
info->users++;
handle = &info->handle;
--
2.43.0
^ permalink raw reply related
* [PATCH 1/3] firmware: arm_scmi: quirk: Improve quirk range parsing
From: Geert Uytterhoeven @ 2026-04-03 8:41 UTC (permalink / raw)
To: Sudeep Holla, Cristian Marussi, Marek Vasut
Cc: arm-scmi, linux-arm-kernel, linux-renesas-soc, Geert Uytterhoeven
In-Reply-To: <cover.1775205358.git.geert+renesas@glider.be>
When a range contains only an end ("-X"), the number string is parsed
twice, as both "sep == first" and "sep != last" are true. Fix this by
dropping the superfluous number parsing for "sep == first".
This does have a harmless functional impact for the unbounded range:
"-" is now accepted, while it was rejected before.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/firmware/arm_scmi/quirks.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/firmware/arm_scmi/quirks.c b/drivers/firmware/arm_scmi/quirks.c
index 03848283c2a07b72..b1d9cd9fa2427879 100644
--- a/drivers/firmware/arm_scmi/quirks.c
+++ b/drivers/firmware/arm_scmi/quirks.c
@@ -238,16 +238,15 @@ static int scmi_quirk_range_parse(struct scmi_quirk *quirk)
if (sep)
*sep = '\0';
- if (sep == first) /* -X */
- ret = kstrtouint(first + 1, 0, &quirk->end_range);
- else /* X OR X- OR X-y */
+ if (sep != first) /* X OR X- OR X-y */ {
ret = kstrtouint(first, 0, &quirk->start_range);
- if (ret)
- return ret;
+ if (ret)
+ return ret;
+ }
if (!sep)
quirk->end_range = quirk->start_range;
- else if (sep != last) /* x-Y */
+ else if (sep != last) /* -X OR x-Y */
ret = kstrtouint(sep + 1, 0, &quirk->end_range);
if (quirk->start_range > quirk->end_range)
--
2.43.0
^ permalink raw reply related
* Re: [PATCH v2 3/5] riscv: shstk: Use the new common vm_mmap_shadow_stack() helper
From: Paul Walmsley @ 2026-04-03 8:34 UTC (permalink / raw)
To: Catalin Marinas
Cc: Andrew Morton, David Hildenbrand, Mark Brown, Deepak Gupta,
Rick Edgecombe, Will Deacon, Paul Walmsley, Palmer Dabbelt,
Albert Ou, Alexandre Ghiti, Thomas Gleixner, Ingo Molnar,
Borislav Petkov, Dave Hansen, H. Peter Anvin, linux-arm-kernel,
linux-kernel, linux-riscv, linux-mm
In-Reply-To: <20260225161404.3157851-4-catalin.marinas@arm.com>
On Wed, 25 Feb 2026, Catalin Marinas wrote:
> Replace part of the allocate_shadow_stack() content with a call to
> vm_mmap_shadow_stack(). There is no functional change.
>
> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
> Tested-by: Deepak Gupta <debug@rivosinc.com>
> Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
> Cc: Paul Walmsley <pjw@kernel.org>
> Cc: Palmer Dabbelt <palmer@dabbelt.com>
> Cc: Albert Ou <aou@eecs.berkeley.edu>
> Cc: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Paul Walmsley <pjw@kernel.org>
- Paul
^ permalink raw reply
* [PATCH] dmaengine: imx-sdma: Refine spba bus searching in probe
From: Shengjiu Wang @ 2026-04-03 8:33 UTC (permalink / raw)
To: vkoul, Frank.Li, s.hauer, kernel, festevam, dmaengine, imx,
linux-arm-kernel, linux-kernel
There are multi spba-busses for i.MX8M* platforms, if only search for
the first spba-bus in DT, the found spba-bus may not the real bus of
audio devices, which cause issue for sdma p2p case, as the sdma p2p
script presently does not deal with the transactions involving two devices
connected to the AIPS bus.
Search the SDMA parent node first, which should be the AIPS bus, then
search the child node whose compatible string is spba-bus under that AIPS
bus for the above multi spba-busses case.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
drivers/dma/imx-sdma.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 3d527883776b..be2fb87b7a89 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -2364,13 +2364,16 @@ static int sdma_probe(struct platform_device *pdev)
return dev_err_probe(&pdev->dev, ret,
"failed to register controller\n");
- spba_bus = of_find_compatible_node(NULL, NULL, "fsl,spba-bus");
+ struct device_node *sdma_parent_np = of_get_parent(np);
+
+ spba_bus = of_get_compatible_child(sdma_parent_np, "fsl,spba-bus");
ret = of_address_to_resource(spba_bus, 0, &spba_res);
if (!ret) {
sdma->spba_start_addr = spba_res.start;
sdma->spba_end_addr = spba_res.end;
}
of_node_put(spba_bus);
+ of_node_put(sdma_parent_np);
}
/*
--
2.34.1
^ permalink raw reply related
* Re: [PATCH] arm64: dts: imx{91,93}-phyboard-segin: Add peb-av-18 overlay
From: Florijan Plohl @ 2026-04-03 8:29 UTC (permalink / raw)
To: Frank Li
Cc: Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, imx, linux-arm-kernel,
devicetree, linux-kernel, upstream
In-Reply-To: <ac50OHuEApM3tRHq@lizhi-Precision-Tower-5810>
Hello,
On 4/2/26 15:50, Frank Li wrote:
> On Thu, Apr 02, 2026 at 09:08:26AM +0200, Florijan Plohl wrote:
>> Add overlay for the PEB-AV-18 adapter on phyBOARD-Segin-i.MX91/93.
> what's means PEB-AV-18? Is it random board name?
The PEB-AV-18 is PHYTEC designation for Audio/Video adapter modules that can
be used to connect displays on their boards.
I will improve commit message to add more such information in v2.
>
>
>> The supported LCD is Powertip PH800480T032-ZHC19 panel (AC220).
>>
>> Signed-off-by: Florijan Plohl <florijan.plohl@norik.com>
>> ---
>> arch/arm64/boot/dts/freescale/Makefile | 4 +
>> .../imx91-phyboard-segin-peb-av-18.dtso | 142 ++++++++++++++++++
>> .../imx93-phyboard-segin-peb-av-18.dtso | 142 ++++++++++++++++++
> Any difference between 91 and 93, can use one overlay file?
>
> Frank
Can you suggest how to do so?
There are imx93-pinfunc.h and imx91-pinfunc.h which are not unified
between imx91 and imx93.
So we can only create common dtsi like so:
imx91-93-phyboard-segin-peb-av-18.dtsi
and still use separate dtsos:
imx91-phyboard-segin-peb-av-18.dtso
imx93-phyboard-segin-peb-av-18.dtso
Is that your idea?
BR,
Florijan Plohl
>> --
>> 2.43.0
>>
^ permalink raw reply
* Re: [PATCH 2/2] ARM: dts: imx25: remove empty clock-names for nand-controller@bb000000
From: Miquel Raynal @ 2026-04-03 8:20 UTC (permalink / raw)
To: Frank Li
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Shawn Guo, Daniel Baluta,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
open list
In-Reply-To: <20260403074634.774234-2-Frank.Li@nxp.com>
On 03/04/2026 at 03:46:31 -04, Frank Li <Frank.Li@nxp.com> wrote:
> clock-names is empty in nand-controller@bb000000, which is wrong.
>
> Remove it to fix below CHECK_DTBS warings:
> arch/arm/boot/dts/nxp/imx/imx25-pdk.dtb: nand-controller@bb000000 (fsl,imx25-nand): Unevaluated properties are not allowed ('clock-names' was unexpected)
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
^ permalink raw reply
* Re: [PATCH 1/2] ARM: dts: imx35: remove empty clock-names for nand-controller@bb000000
From: Miquel Raynal @ 2026-04-03 8:19 UTC (permalink / raw)
To: Frank Li
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Daniel Baluta, Shawn Guo,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
open list
In-Reply-To: <20260403074634.774234-1-Frank.Li@nxp.com>
On 03/04/2026 at 03:46:30 -04, Frank Li <Frank.Li@nxp.com> wrote:
> clock-names is empty in nand-controller@bb000000, which is wrong.
>
> Remove it to fix below CHECK_DTBS warings:
> arch/arm/boot/dts/nxp/imx/imx35-pdk.dtb: nand-controller@bb000000 (fsl,imx35-nand): Unevaluated properties are not allowed ('clock-names' was unexpected)
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
^ permalink raw reply
* Re: [RFC v1 01/11] media: uapi: v4l2-isp: Add v4l2 ISP extensible statistics definitions
From: Jacopo Mondi @ 2026-04-03 8:19 UTC (permalink / raw)
To: Antoine Bouyer
Cc: julien.vuillaumier, alexi.birlinger, daniel.baluta, peng.fan,
frank.li, jacopo.mondi, laurent.pinchart, mchehab, robh, krzk+dt,
conor+dt, shawnguo, s.hauer, kernel, festevam, linux-kernel,
linux-media, devicetree, linux-arm-kernel, Jai Luthra, paul elder
In-Reply-To: <20260123080938.3367348-2-antoine.bouyer@nxp.com>
Hello Antoine
in cc Jai and Paul
Jai and Paul are working on upstreaming new ISP formats which would
benefit from usage of extensible stats.
No pressure of course, just wanted to check how things are progressing
on your side. Do you have an updated version of this patch which can
be taken in ? Should we sync and work on an updated version ?
Thanks!
j
On Fri, Jan 23, 2026 at 09:09:28AM +0100, Antoine Bouyer wrote:
> Extend the v4l2-isp extensible format introduced for isp parameters buffer
> to the statistics buffer as well.
>
> Like for ISP configuration purpose, that will help supporting various ISP
> hardware versions reporting different statistics data with less impact on
> userspace.
>
> The `v4l2_isp_stats_buffer` reuses the `v4l2_isp_params_buffer` container
> definitions, with similar header, versions and flags. V0 and V1 versions
> are provided to match with params versions. On the other side, ENABLE and
> DISABLE flags are not really meaningfull for statistics purpose. So VALID
> and INVALID flags are introduced. Purpose is to force ISP driver to
> validate a statistics buffer, before it is consumed by userspace.
>
> Signed-off-by: Antoine Bouyer <antoine.bouyer@nxp.com>
> ---
> include/uapi/linux/media/v4l2-isp.h | 85 +++++++++++++++++++++++++++++
> 1 file changed, 85 insertions(+)
>
> diff --git a/include/uapi/linux/media/v4l2-isp.h b/include/uapi/linux/media/v4l2-isp.h
> index 779168f9058e..ed1279b86694 100644
> --- a/include/uapi/linux/media/v4l2-isp.h
> +++ b/include/uapi/linux/media/v4l2-isp.h
> @@ -99,4 +99,89 @@ struct v4l2_isp_params_buffer {
> __u8 data[] __counted_by(data_size);
> };
>
> +/**
> + * enum v4l2_isp_stats_version - V4L2 ISP statistics versioning
> + *
> + * @V4L2_ISP_STATS_VERSION_V0: First version of the V4L2 ISP statistics format
> + * (for compatibility)
> + * @V4L2_ISP_STATS_VERSION_V1: First version of the V4L2 ISP statistics format
> + *
> + * V0 and V1 are identical, and comply with V4l2 ISP parameters versions. So
> + * both V0 and V1 refers to the first version of the V4L2 ISP statistics
> + * format.
> + *
> + * Future revisions of the V4L2 ISP statistics format should start from the
> + * value of 2.
> + */
> +enum v4l2_isp_stats_version {
> + V4L2_ISP_STATS_VERSION_V0 = 0,
> + V4L2_ISP_STATS_VERSION_V1,
> +};
> +
> +#define V4L2_ISP_PARAMS_FL_BLOCK_VALID (1U << 0)
> +#define V4L2_ISP_PARAMS_FL_BLOCK_INVALID (1U << 1)
> +
> +/*
> + * Reserve the first 8 bits for V4L2_ISP_STATS_FL_* flag.
> + *
> + * Driver-specific flags should be defined as:
> + * #define DRIVER_SPECIFIC_FLAG0 ((1U << V4L2_ISP_STATS_FL_DRIVER_FLAGS(0))
> + * #define DRIVER_SPECIFIC_FLAG1 ((1U << V4L2_ISP_STATS_FL_DRIVER_FLAGS(1))
> + */
> +#define V4L2_ISP_STATS_FL_DRIVER_FLAGS(n) ((n) + 8)
> +
> +/**
> + * struct v4l2_isp_stats_block_header - V4L2 extensible statistics block header
> + * @type: The statistics block type (driver-specific)
> + * @flags: A bitmask of block flags (driver-specific)
> + * @size: Size (in bytes) of the statistics block, including this header
> + *
> + * This structure represents the common part of all the ISP statistics blocks.
> + * Each statistics block shall embed an instance of this structure type as its
> + * first member, followed by the block-specific statistics data.
> + *
> + * The @type field is an ISP driver-specific value that identifies the block
> + * type. The @size field specifies the size of the parameters block.
> + *
> + * The @flags field is a bitmask of per-block flags V4L2_STATS_ISP_FL_* and
> + * driver-specific flags specified by the driver header.
> + */
> +struct v4l2_isp_stats_block_header {
> + __u16 type;
> + __u16 flags;
> + __u32 size;
> +} __attribute__((aligned(8)));
> +
> +/**
> + * struct v4l2_isp_stats_buffer - V4L2 extensible statistics data
> + * @version: The statistics buffer version (driver-specific)
> + * @data_size: The statistics data effective size, excluding this header
> + * @data: The statistics data
> + *
> + * This structure contains the statistics information of the ISP hardware,
> + * serialized for userspace into a data buffer. Each statistics block is
> + * represented by a block-specific structure which contains a
> + * :c:type:`v4l2_isp_stats_block_header` entry as first member. Driver
> + * populates the @data buffer with statistics information of the ISP blocks it
> + * intends to share to userspace. As a consequence, the data buffer effective
> + * size changes according to the number of ISP blocks that driver intends to
> + * provide and is set by the driver in the @data_size field.
> + *
> + * The statistics buffer is versioned by the @version field to allow modifying
> + * and extending its definition. Driver shall populate the @version field to
> + * inform the userpsace about the version it intends to use. The userspace will
> + * parse and handle the @data buffer according to the data layout specific to
> + * the indicated version.
> + *
> + * For each ISP block that driver wants to report, a block-specific structure
> + * is appended to the @data buffer, one after the other without gaps in
> + * between. Driver shall populate the @data_size field with the effective
> + * size, in bytes, of the @data buffer.
> + */
> +struct v4l2_isp_stats_buffer {
> + __u32 version;
> + __u32 data_size;
> + __u8 data[] __counted_by(data_size);
> +};
> +
> #endif /* _UAPI_V4L2_ISP_H_ */
> --
> 2.52.0
>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox