* Re: [PATCH 1/7] dt-bindings: rtc: sun6i: Add Allwinner A733 support
From: Junhui Liu @ 2026-04-10 9:18 UTC (permalink / raw)
To: wens, Junhui Liu
Cc: Michael Turquette, Stephen Boyd, Jernej Skrabec, Samuel Holland,
Alexandre Belloni, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Maxime Ripard, linux-clk, linux-arm-kernel, linux-sunxi,
linux-kernel, linux-rtc, devicetree
In-Reply-To: <CAGb2v67844OPwE6VJ0PAs5LsmCa2h0FvXOBUomZ50dM5tZ0Zow@mail.gmail.com>
Hi ChenYu,
Thanks for your patient review.
On Sat Mar 28, 2026 at 8:37 PM CST, Chen-Yu Tsai wrote:
> On Wed, Jan 21, 2026 at 7:03 PM Junhui Liu <junhui.liu@pigmoral.tech> wrote:
>>
>> The RTC module in the Allwinner A733 SoC is functionally compatible with
>> the sun6i RTC, but its internal Clock Control Unit (CCU) has significant
>> changes.
>>
>> The A733 supports selecting the oscillator between three frequencies:
>> 19.2MHz, 24MHz, and 26MHz. The RTC CCU relies on hardware to detect
>> which frequency is actually used on the board. By defining all three
>> frequencies as fixed-clocks in the device tree, the driver can identify
>> the hardware-detected frequency and expose it to the rest of the system.
>
> No. The board device tree shall have the exact and correct frequency
> defined in the external crystal device node. The operating system can
> use the hardware-detected frequency to "fix" the in-system representation
> if it is off.
Okay, I will keep only one main external crystal in the device tree.
>
>> Additionally, the A733 RTC CCU provides several new DCXO gate clocks for
>> specific modules, including SerDes, HDMI, and UFS.
>>
>> Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
>> ---
>> .../bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 38 ++++++++++++++++++++--
>> include/dt-bindings/clock/sun60i-a733-rtc.h | 16 +++++++++
>> 2 files changed, 52 insertions(+), 2 deletions(-)
>>
[...]
>> diff --git a/include/dt-bindings/clock/sun60i-a733-rtc.h b/include/dt-bindings/clock/sun60i-a733-rtc.h
>> new file mode 100644
>> index 000000000000..8a2b5facad73
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/sun60i-a733-rtc.h
>> @@ -0,0 +1,16 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only OR MIT */
>> +
>> +#ifndef _DT_BINDINGS_CLK_SUN60I_A733_RTC_H_
>> +#define _DT_BINDINGS_CLK_SUN60I_A733_RTC_H_
>> +
>> +#define CLK_IOSC 0
>> +#define CLK_OSC32K 1
>> +#define CLK_HOSC 2
>
> The DCXO enable control has been present since at least the H6. We just
> never added it, as we would never disable it anyway.
I will remove it.
>
> If you compare the RTC clock trees of the A733 and A523, the only addition
> besides the new gates seems to be the LOSC auto selection. But even that
> is just an illusion, as the A523 has the same registers for that.
>
> One could say the A733 RTC is almost backward compatible to the A523, if
> not for the two fastboot registers the A523 has at 0x120 and 0x124.
>
> So I ask that you try to integrate the differences into the existing
> driver and bindings. You can tweak and export internal clks if you
> need.
Okay, I will try to integrate the A733 RTC support into the existing
driver and bindings.
But first I would like to ask for your advice on how to correctly
organize the device tree binding header for the clocks? I have two ideas
in mind:
1. Add the common internal clocks (e.g., CLK_RTC_32K) to the existing
sun6i-rtc.h. Then, create a new sun60i-a733-rtc.h which includes
the old sun6i-rtc.h and appends the A733-specific clock gates.
2. Simply append all the new A733-specific clock IDs directly to the
bottom of the existing sun6i-rtc.h, sharing the same header file for all
SoCs utilizing this driver.
>
>> +#define CLK_RTC_32K 3
>
> AFAICT besides being an internal clock, this is also fed to GPIO for
> debounce? We probably need to expose this on the A523 as well.
>
I will do it.
>
> Thanks
> ChenYu
>
--
Best regards,
Junhui Liu
^ permalink raw reply
* Re: [PATCH v10 16/20] coresight: Add PM callbacks for sink device
From: James Clark @ 2026-04-10 9:11 UTC (permalink / raw)
To: Leo Yan
Cc: Suzuki K Poulose, coresight, linux-arm-kernel, Yeoreum Yun,
Mark Rutland, Will Deacon, Yabin Cui, Keita Morisaki,
Yuanfang Zhang, Greg Kroah-Hartman, Alexander Shishkin,
Tamas Petz, Thomas Gleixner, Peter Zijlstra, Mike Leach
In-Reply-To: <20260409144949.GT356832@e132581.arm.com>
On 09/04/2026 3:49 pm, Leo Yan wrote:
> On Thu, Apr 09, 2026 at 03:30:56PM +0100, James Clark wrote:
>
> [...]
>
>>>>> @@ -1759,16 +1760,36 @@ static int coresight_pm_check(struct
>>>>> coresight_path *path)
>>>>> if (source_has_cb)
>>>>> return 1;
>>>>> + sink_has_cb = coresight_ops(sink)->pm_save_disable &&
>>>>> + coresight_ops(sink)->pm_restore_enable;
>>>>> + /*
>>>>> + * It is not permitted that the source has no callbacks
>>>>> while the sink
>>>>> + * does, as the sink cannot be disabled without disabling
>>>>> the source,
>>>>> + * which may lead to lockups. Alternatively, the ETM driver should
>>>>> + * enable self-hosted PM mode at probe (see etm4_probe()).
>>>>> + */
>>>>> + if (sink_has_cb) {
>>>>> + pr_warn_once("coresight PM failed: source has no PM
>>>>> callbacks; "
>>>>> + "cannot safely control sink\n");
>>>>
>>>> This prints out on my Orion board on a fresh boot because of how
>>>> pm_save_enable is setup there. Do we really need the configuration
>>>> of pm_save_enable for ETE/TRBE if we know that it always needs
>>>> saving?
>
> Yeah, I can remove this check and always bind CPU PM ops for ETE.
>
>>>> It also stops warning if I rmmod and modprobe the module after
>>>> booting. Seems like pm_save_enable is different depending on how the
>>>> module is loaded which doesn't seem right.
>>>
>>> Thats because the warning is pr_warn_*once*()
>>
>> I don't think so, I tested it with a printf instead of a warn once and also
>> tested modprobeing straight after a reboot.
>
> I am a bit surprised that Orion6 hits the CPU idle flow, as I observed
> that idle states are not enabled on my board:
>
> # ls /sys/devices/system/cpu/cpu*/cpuidle
> ls: cannot access '/sys/devices/system/cpu/cpu*/cpuidle': No such file or directory
>
/sys/devices/system/cpu/cpu0/cpuidle:
total 0
drwxr-xr-x 9 root 0 Apr 10 10:08 ..
drwxr-xr-x 2 root 0 Apr 10 10:10 state2
drwxr-xr-x 2 root 0 Apr 10 10:10 state1
drwxr-xr-x 2 root 0 Apr 10 10:10 state0
drwxr-xr-x 2 root 0 Apr 10 10:10 driver
drwxr-xr-x 6 root 0 Apr 10 10:10 .
> If you hit only once CPU idle notifier, it is good to add a
> dump_stack() in coresight_cpu_pm_notify and print the "cmd" argument,
> so we can know the calling coming from where. I am a bit suspect it
> might be a glitch in CPUIdle layer.
>
> Thanks,
> Leo
cmd: 2
[ 7.878456] coresight_cpu_pm_notify+0x148/0x4b0
[ 7.878462] notifier_call_chain+0x8c/0x1e0
[ 7.878467] raw_notifier_call_chain+0x24/0x38
[ 7.878469] cpu_pm_exit+0x34/0x68
[ 7.878472] acpi_processor_ffh_lpi_enter+0x40/0x78
[ 7.878476] acpi_idle_lpi_enter+0x54/0x78
[ 7.878481] cpuidle_enter_state+0xb4/0x250
[ 7.878483] cpuidle_enter+0x44/0x68
[ 7.878487] do_idle+0x1e0/0x278
[ 7.878492] cpu_startup_entry+0x40/0x50
[ 7.878495] rest_init+0xec/0xf8
[ 7.878497] start_kernel+0x348/0x400
[ 7.878503] __primary_switched+0x88/0x98
-> zcat /proc/config.gz | grep IDLE
CONFIG_CONTEXT_TRACKING_IDLE=y
CONFIG_NO_HZ_IDLE=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
CONFIG_DT_IDLE_STATES=y
CONFIG_DT_IDLE_GENPD=y
CONFIG_ARM_PSCI_CPUIDLE=y
CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
^ permalink raw reply
* Re: [PATCH 2/3] pmdomain: core: add support for power-domains-child-ids
From: Ulf Hansson @ 2026-04-10 8:57 UTC (permalink / raw)
To: Kevin Hilman
Cc: Rob Herring, Geert Uytterhoeven, linux-pm, devicetree,
linux-kernel, arm-scmi, linux-arm-kernel
In-Reply-To: <7h4iljskvz.fsf@baylibre.com>
On Fri, 10 Apr 2026 at 02:45, Kevin Hilman <khilman@baylibre.com> wrote:
>
> Ulf Hansson <ulf.hansson@linaro.org> writes:
>
> > On Wed, 11 Mar 2026 at 01:19, Kevin Hilman (TI) <khilman@baylibre.com> wrote:
> >>
> >> Currently, PM domains can only support hierarchy for simple
> >> providers (e.g. ones with #power-domain-cells = 0).
> >>
> >> Add support for oncell providers as well by adding a new property
> >> `power-domains-child-ids` to describe the parent/child relationship.
> >>
> >> For example, an SCMI PM domain provider has multiple domains, each of
> >> which might be a child of diffeent parent domains. In this example,
> >> the parent domains are MAIN_PD and WKUP_PD:
> >>
> >> scmi_pds: protocol@11 {
> >> reg = <0x11>;
> >> #power-domain-cells = <1>;
> >> power-domains = <&MAIN_PD>, <&WKUP_PD>;
> >> power-domains-child-ids = <15>, <19>;
> >> };
> >>
> >> With this example using the new property, SCMI PM domain 15 becomes a
> >> child domain of MAIN_PD, and SCMI domain 19 becomes a child domain of
> >> WKUP_PD.
> >>
> >> To support this feature, add two new core functions
> >>
> >> - of_genpd_add_child_ids()
> >> - of_genpd_remove_child_ids()
> >>
> >> which can be called by pmdomain providers to add/remove child domains
> >> if they support the new property power-domains-child-ids.
> >>
> >> Signed-off-by: Kevin Hilman (TI) <khilman@baylibre.com>
> >
> > Thanks for working on this! It certainly is a missing feature!
>
> You're welcome, thanks for the detailed review.
>
> >> ---
> >> drivers/pmdomain/core.c | 169 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >> include/linux/pm_domain.h | 16 ++++++++++++++++
> >> 2 files changed, 185 insertions(+)
> >>
> >> diff --git a/drivers/pmdomain/core.c b/drivers/pmdomain/core.c
> >> index 61c2277c9ce3..acb45dd540b7 100644
> >> --- a/drivers/pmdomain/core.c
> >> +++ b/drivers/pmdomain/core.c
> >> @@ -2909,6 +2909,175 @@ static struct generic_pm_domain *genpd_get_from_provider(
> >> return genpd;
> >> }
> >>
> >> +/**
> >> + * of_genpd_add_child_ids() - Parse power-domains-child-ids property
> >> + * @np: Device node pointer associated with the PM domain provider.
> >> + * @data: Pointer to the onecell data associated with the PM domain provider.
> >> + *
> >> + * Parse the power-domains and power-domains-child-ids properties to establish
> >> + * parent-child relationships for PM domains. The power-domains property lists
> >> + * parent domains, and power-domains-child-ids lists which child domain IDs
> >> + * should be associated with each parent.
> >> + *
> >> + * Returns 0 on success, -ENOENT if properties don't exist, or negative error code.
> >
> > I think we should avoid returning specific error codes for specific
> > errors, simply because it usually becomes messy.
> >
> > If I understand correctly the intent here is to allow the caller to
> > check for -ENOENT and potentially avoid bailing out as it may not
> > really be an error, right?
>
> Right, -ENOENT is not an error of parsing, it's to indicate that there
> are no child-ids to be parsed.
>
> > Perhaps a better option is to return the number of children for whom
> > we successfully assigned parents. Hence 0 or a positive value allows
> > the caller to understand what happened. More importantly, a negative
> > error code then really becomes an error for the caller to consider.
>
> I explored this a bit, but it gets messy quick. It means we have to
> track cases where only some of the children were added as well as when
> all children were added. Personally, I think this should be an "all or
> nothing" thing. If all the children cannot be parsed/added, then none
> of them should be added.
>
> This also allows the remove to not have to care about how many were
> added, and just remove them all, with the additional benefit of not
> having to track the state of how many children were successfully added.
>
I fully agree, it should be all or nothing. Failing with one
child/parent should end up with an error code being returned.
That said, it still seems to make perfect sense to return the number
of children for whom we assigned parents for, no?
[...]
> >> +int of_genpd_remove_child_ids(struct device_node *np,
> >> + struct genpd_onecell_data *data)
> >> +{
> >> + struct of_phandle_args parent_args;
> >> + struct generic_pm_domain *parent_genpd, *child_genpd;
> >> + struct of_phandle_iterator it;
> >> + const struct property *prop;
> >> + const __be32 *item;
> >> + u32 child_id;
> >> + int ret;
> >> +
> >> + /* Check if both properties exist */
> >> + if (of_count_phandle_with_args(np, "power-domains", "#power-domain-cells") <= 0)
> >> + return -ENOENT;
> >> +
> >> + prop = of_find_property(np, "power-domains-child-ids", NULL);
> >> + if (!prop)
> >> + return -ENOENT;
> >> +
> >> + item = of_prop_next_u32(prop, NULL, &child_id);
> >
> > Similar comments as for of_genpd_add_child_ids().
> >
> > Moreover, I think we should remove the children in the reverse order
> > of how we added them.
>
> I'm curious why does the order matter? The children are all siblings
> (no hierarchy), so why would the order be important?
It might not be that important, but generally, it seems like a good
idea to me to reverse the order when undoing things.
>
> I'm not ware of a phandle iterator/helper to parse in the reverse, so
> that would mean iterating once to create a list, and then walking it in
> reverse. Seems unnecessary.
Sure, I leave the call to you, to see what fits best.
Kind regards
Uffe
^ permalink raw reply
* Re: [PATCH v10 16/20] coresight: Add PM callbacks for sink device
From: James Clark @ 2026-04-10 8:55 UTC (permalink / raw)
To: Leo Yan
Cc: coresight, linux-arm-kernel, Yeoreum Yun, Mark Rutland,
Will Deacon, Yabin Cui, Keita Morisaki, Yuanfang Zhang,
Greg Kroah-Hartman, Alexander Shishkin, Tamas Petz,
Thomas Gleixner, Peter Zijlstra, Suzuki K Poulose, Mike Leach
In-Reply-To: <20260409154437.GU356832@e132581.arm.com>
On 09/04/2026 4:44 pm, Leo Yan wrote:
> On Thu, Apr 09, 2026 at 11:52:00AM +0100, James Clark wrote:
>
> [...]
>
>>> @@ -1787,15 +1808,32 @@ static int coresight_pm_save(struct coresight_path *path)
>>> to = list_prev_entry(coresight_path_last_node(path), link);
>>> coresight_disable_path_from_to(path, from, to);
>>> + ret = coresight_pm_device_save(coresight_get_sink(path));
>>> + if (ret)
>>> + goto sink_failed;
>>> +
>>
>> The comment directly above this says "Up to the node before sink to avoid
>> latency". But then this line goes and saves the sink anyway. So I'm not sure
>> what's meant by the comment?
>
> I will refine the comment to: "Control the path up to the node before
> the _system_ sink to avoid latency caused by memory copying; afterwards,
> saves context if the sink provides a callback".
>
>
But list_prev_entry(coresight_path_last_node(path)) doesn't do any thing
special for system sinks, it always returns from source up to the sink
regardless of the type. Shouldn't it be more like:
/* Disable up to the node before sink */
to = list_prev_entry(coresight_path_last_node(path), link);
coresight_disable_path_from_to(path, from, to);
/*
* Save sink. Most sinks don't implement a save callback to avoid
* latency caused by memory copying.
*/
ret = coresight_pm_device_save(coresight_get_sink(path));
>>> return 0;
>>> +
>>> +sink_failed:
>>> + if (!coresight_enable_path_from_to(path, coresight_get_mode(source),
>>> + from, to))
>>> + coresight_pm_device_restore(source);
>>> +
>>> + pr_err("Failed in coresight PM save on CPU%d: %d\n",
>>> + smp_processor_id(), ret);
>>> + this_cpu_write(percpu_pm_failed, true);
>>
>> Why does only a failing sink set percpu_pm_failed when failing to save the
>> source exits early.
>
> My purpose is to use "percpu_pm_failed == true" to prevent further
> issues if we already know the link has failed. To be clear, this is not
> a recovery mechanism; it simply means "if link enabling or disabling
> fails in CPU PM, do not continue to avoid potential hardware lockups.”
>
> The source save failure is a bit special, it fails at the beginning of
> the CoreSight CPU PM flow, and the returned error prevents the CPU idle
> flow from proceeding. As a result, there is nothing further to do.
>
>> Sashiko has a similar comment that this could result in
>> restoring uninitialised source save data later, but a comment in this
>> function about why the flow is like this would be helpful.
>
> The comment of "Restoring uninitialised source save data later" does not
> make sense.
>
> When the save fails, the notifier only rolls back the callbacks that ran
> before the failing callback by invoking CPU_PM_ENTER_FAILED. And there
> is no CPU_PM_EXIT, as the idle state is never entered.
>
Make sense.
>> We have coresight_disable_path_from_to() which always succeeds and doesn't
>> return an error. TRBE is the only sink with a pm_save_disable()
>> callback, but it always succeeds anyway.
>>
>> Would it not be much simpler to require that sink save/restore callbacks
>> always succeed and don't return anything? Seems like this percpu_pm_failed
>> stuff is extra complexity for a scenario that doesn't exist? The only thing
>> that can fail is saving the source but it doesn't goto sink_failed when that
>> happens.
>
> As you suggested, I can simplify the code with assuming sink ops
> always success, but we might expect complaints from Sashiko.
>
If we're keeping the exit value for sources and we're sharing the same
callback signature with sinks then it makes sense to keep the error
handling then. I was thinking it would be nice to remove it if we got
rid of both.
>> Ideally etm4_cpu_save() wouldn't have a return value either. It would be
>> good if we could find away to skip or ignore the timeouts in there somehow
>> because that's the only reason it can fail.
>
> Seems to me, ETMv4 has a timeout log and returns error is not bad, as
> it can be helpful to locate issue in a cheap way (sometimes, hang
> issue caused by lockup might be a time-consumed debugging).
>
> Thanks,
> Leo
^ permalink raw reply
* Re: [PATCH v13 11/17] drm/bridge: analogix_dp: Apply drm_bridge_connector helper
From: Damon Ding @ 2026-04-10 8:52 UTC (permalink / raw)
To: Luca Ceresoli, andrzej.hajda, neil.armstrong, rfoss,
maarten.lankhorst, mripard, tzimmermann, airlied, simona,
victor.liu, Frank.Li, shawnguo, s.hauer, inki.dae, sw0312.kim,
kyungmin.park, krzk, jingoohan1, p.zabel, hjc, heiko, andy.yan
Cc: Laurent.pinchart, jonas, jernej.skrabec, kernel, festevam,
alim.akhtar, dmitry.baryshkov, nicolas.frattaroli, dianders,
m.szyprowski, linux-kernel, dri-devel, imx, linux-arm-kernel,
linux-samsung-soc, linux-rockchip
In-Reply-To: <DHPB0K9AHVR3.33XQ35I1GV96N@bootlin.com>
Hi Luca,
On 4/10/2026 3:41 PM, Luca Ceresoli wrote:
> Hello Damon,
>
> On Thu Apr 9, 2026 at 8:52 AM CEST, Damon Ding wrote:
>> Initialize bridge_connector for both Rockchip and Exynos encoder sides.
>> Then, make DRM_BRIDGE_ATTACH_NO_CONNECTOR mandatory for Analogix bridge
>> side, as the private &drm_connector is no longer created.
>>
>> The previous &drm_connector_funcs and &drm_connector_helper_funcs APIs
>> are replaced by the corresponding &drm_bridge_funcs APIs:
>>
>> analogix_dp_atomic_check() -> analogix_dp_bridge_atomic_check()
>> analogix_dp_detect() -> analogix_dp_bridge_detect()
>> analogix_dp_get_modes() -> analogix_dp_bridge_get_modes()
>> analogix_dp_bridge_edid_read()
>>
>> Additionally, the compatibilities of Analogix DP bridge based on whether
>> the next bridge is a 'panel'. If it is, OP_MODES and OP_DETECT are
>> supported; If not (the next bridge is a 'monitor' or a bridge chip),
>> OP_EDID and OP_DETECT are supported.
>>
>> The devm_drm_bridge_add() is placed in analogix_dp_bind() instead of
>> analogix_dp_probe(), because the type of next bridge (the panel, monitor
>> or bridge chip) can only be determined after the probe process has fully
>> completed.
>>
>> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
>> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
>> Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
>
> I noticed two issues, sorry I haven't catched them before...
>
>> @@ -1580,7 +1533,8 @@ EXPORT_SYMBOL_GPL(analogix_dp_unbind);
>>
>> int analogix_dp_start_crc(struct drm_connector *connector)
>> {
>> - struct analogix_dp_device *dp = to_dp(connector);
>> + struct analogix_dp_device *dp;
>> + struct drm_bridge *bridge;
>>
>> if (!connector->state->crtc) {
>> DRM_ERROR("Connector %s doesn't currently have a CRTC.\n",
>> @@ -1588,13 +1542,26 @@ int analogix_dp_start_crc(struct drm_connector *connector)
>> return -EINVAL;
>> }
>>
>> + bridge = drm_bridge_chain_get_first_bridge(connector->encoder);
>> + if (bridge->type != DRM_MODE_CONNECTOR_eDP)
>> + return -EINVAL;
>> +
>> + dp = to_dp(bridge);
>> +
>> return drm_dp_start_crc(&dp->aux, connector->state->crtc);
>> }
>
> drm_bridge_chain_get_first_bridge() takes a reference, you must call
> drm_bridge_put(bridge) before returning. Given there are two return paths I
> suggest:
>
> - struct drm_bridge *bridge;
>
> - bridge = drm_bridge_chain_get_first_bridge(connector->encoder);
> + struct drm_bridge *bridge __free(drm_bridge_put) =
> + drm_bridge_chain_get_first_bridge(connector->encoder);
>
>> EXPORT_SYMBOL_GPL(analogix_dp_start_crc);
>>
>> int analogix_dp_stop_crc(struct drm_connector *connector)
>> {
>> - struct analogix_dp_device *dp = to_dp(connector);
>> + struct analogix_dp_device *dp;
>> + struct drm_bridge *bridge;
>> +
>> + bridge = drm_bridge_chain_get_first_bridge(connector->encoder);
>> + if (bridge->type != DRM_MODE_CONNECTOR_eDP)
>> + return -EINVAL;
>> +
>> + dp = to_dp(bridge);
>>
>> return drm_dp_stop_crc(&dp->aux);
>> }
>
> Same here:
>
> - struct drm_bridge *bridge;
>
> - bridge = drm_bridge_chain_get_first_bridge(connector->encoder);
> + struct drm_bridge *bridge __free(drm-bridge_put) =
> + drm_bridge_chain_get_first_bridge(connector->encoder);
>
> With the above two changes you can add to v14:
>
> +Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
>
>
Ah, your previous commit added this nice reference handling. Thanks for
the kind review.
I'll fix it in v14.
Best regards,
Damon
^ permalink raw reply
* [GIT PULL] amlogic ARM64 DT updates for v7.1
From: Neil Armstrong @ 2026-04-10 8:50 UTC (permalink / raw)
To: soc, arm; +Cc: linux-amlogic, linux-arm-kernel
Hi,
Here's the Amlogic ARM64 DT changes for v7.1, including a bunch of fixes
and improvements for the Khadas VIM4 and VIM1s SBCs, plus some additions
for the Phicomm N1 and a couple of low priority fixes.
Thanks,
Neil
The following changes since commit 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f:
Linux 7.0-rc1 (2026-02-22 13:18:59 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git tags/amlogic-arm64-dt-for-v7.1
for you to fetch changes up to 401e5c73eedde8225e87bd11c794b8409248ff41:
arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number (2026-04-08 14:27:20 +0200)
----------------------------------------------------------------
Amlogic ARM64 DT for v7.1:
- Khadas VIM4 (T7 SoC) Fixes and features:
- Memory layout fixup
- GIC register range
- Model name fixup
- PWM, eMMC, SD card and SDIO support
- Khadas VIM1s Features
- Bluetooth
- PWM LED
- Power Key
- Function Key via SARADC
- RTC
- Remote control keymap
- Bluetooth node for Phicomm N1
- Misc fixes:
- Drop CPU masks from GICv3 PPI interrupts
- Fix ethernet PHY gpio irq index for P230
----------------------------------------------------------------
Anand Moon (1):
arm64: dts: amlogic: meson-axg: Add missing cache information to cpu0
Geert Uytterhoeven (1):
arm64: dts: amlogic: s6: Drop CPU masks from GICv3 PPI interrupts
Jian Hu (1):
arm64: dts: amlogic: t7: Add clock controller nodes
Jun Yan (2):
arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: add bluetooth node
arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number
Nick Xie (11):
arm64: dts: amlogic: t7: khadas-vim4: fix memory layout for 8GB RAM
arm64: dts: amlogic: t7: khadas-vim4: fix board model name
arm64: dts: amlogic: meson-s4: add UART_A node
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: enable bluetooth
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: add PWM LED support
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: add POWER key support
arm64: dts: amlogic: meson-s4: add internal SARADC controller
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: add Function key support
arm64: dts: amlogic: meson-s4: add VRTC node
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: enable HYM8563 RTC
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: use rc-khadas keymap
Ronald Claveau (10):
arm64: dts: amlogic: Fix GIC register ranges for Amlogic T7
arm64: dts: amlogic: t7: Add eMMC, SD card and SDIO pinctrl nodes
arm64: dts: amlogic: t7: Add PWM pinctrl nodes
arm64: dts: amlogic: t7: khadas-vim4: Add power regulators
arm64: dts: amlogic: t7: khadas-vim4: Remove invalid property
arm64: dts: amlogic: t7: Add MMC controller nodes
arm64: dts: amlogic: t7: Add PWM controller nodes
arm64: dts: amlogic: t7: khadas-vim4: Add SDIO power sequence and WiFi clock
arm64: dts: amlogic: t7: khadas-vim4: Add MMC nodes
arm64: dts: amlogic: t7: Fix missing required reset property
arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi | 10 +-
.../dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts | 205 ++++++++-
arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 468 ++++++++++++++++++++-
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 +
.../boot/dts/amlogic/meson-gxl-s905d-p230.dts | 3 +-
.../dts/amlogic/meson-gxl-s905d-phicomm-n1.dts | 15 +
.../dts/amlogic/meson-s4-s905y4-khadas-vim1s.dts | 81 ++++
arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 45 ++
8 files changed, 824 insertions(+), 9 deletions(-)
^ permalink raw reply
* Re: [PATCH v10 17/20] coresight: trbe: Save and restore state across CPU low power state
From: James Clark @ 2026-04-10 8:45 UTC (permalink / raw)
To: Leo Yan
Cc: coresight, linux-arm-kernel, Suzuki K Poulose, Mike Leach,
Yeoreum Yun, Mark Rutland, Will Deacon, Yabin Cui, Keita Morisaki,
Yuanfang Zhang, Greg Kroah-Hartman, Alexander Shishkin,
Tamas Petz, Thomas Gleixner, Peter Zijlstra
In-Reply-To: <20260409155433.GV356832@e132581.arm.com>
On 09/04/2026 4:54 pm, Leo Yan wrote:
> On Thu, Apr 09, 2026 at 11:52:06AM +0100, James Clark wrote:
>> On 05/04/2026 4:02 pm, Leo Yan wrote:
>>> From: Yabin Cui <yabinc@google.com>
>>>
>>> TRBE context can be lost when a CPU enters low power states. If a trace
>>> source is restored while TRBE is not, tracing may run without an active
>>> sink, which can lead to hangs on some devices (e.g., Pixel 9).
>>
>> Can't this still happen if saving the source times out on "wait for
>> TRCSTATR.IDLE to go up"?
>>
>> That would make coresight_pm_save() exit early, not saving the active TRBE
>> state. Then when coresight_pm_restore() is called it restores a stale
>> inactive sink, then enables the source again which is the state that can
>> hang.
>
> Hmm... I don't expect this to happen anyway.
>
> If CPU PM enter fails and returns an error, it will bail out early of
> the idle flow and the CPU will not proceed entering low power states;
> therefore, the restore flow does not exist.
>
> Thanks,
> Leo
Ah ok I missed that that was how it behaved. I didn't realise that an
error here would prevent the restore from being called. That makes my
other comments redundant as well then.
^ permalink raw reply
* Re: [PATCH RFC net-next 02/10] net: stmmac: rename dev_id to userver
From: Russell King (Oracle) @ 2026-04-10 8:39 UTC (permalink / raw)
To: Jitendra Vegiraju
Cc: Andrew Lunn, Alexandre Torgue, Andrew Lunn, Chen-Yu Tsai,
David S. Miller, Eric Dumazet, Jakub Kicinski, linux-arm-kernel,
linux-stm32, linux-sunxi, netdev, Paolo Abeni, Samuel Holland
In-Reply-To: <CAMdnO-+TK65AxjTsDd017Mhop+VC3Xf8jtfaTXYpE6wBNZOt4g@mail.gmail.com>
On Thu, Apr 09, 2026 at 04:07:42PM -0700, Jitendra Vegiraju wrote:
> Hi Russell,
>
> On Wed, Apr 8, 2026 at 2:27 AM Russell King (Oracle)
> <rmk+kernel@armlinux.org.uk> wrote:
> >
> > The Synopsys Databook and several implementation TRMs identify bits
> > 15:8 of the version register in dwmac v3.xx and v4.xx as "userver".
> > We even print its value with "User ID". Rather than using "dev_id",
> > use "userver" instead.
> >
> > Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> > ---
> > drivers/net/ethernet/stmicro/stmmac/hwif.c | 18 +++++++++---------
> > 1 file changed, 9 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.c b/drivers/net/ethernet/stmicro/stmmac/hwif.c
> > index 3774af66db48..830ff816ab4f 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/hwif.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.c
> > @@ -15,7 +15,7 @@
> >
> > struct stmmac_version {
> > u8 snpsver;
> > - u8 dev_id;
> > + u8 userver;
> > };
> From the XGMAC databook that I have access to bits(15:8) identify the
> DEVID field of MAC_version register.
> The userver field is from bits(23:16) of the same register. This is a
> customer defined field (configured with coreConsultant).
> Currently stmmac doesn't care about bits(23:16).
Thanks for the additional information.
I don't have any XGMAC documentation, but this indicates that it differs
between XGMAC and previous cores - GMAC and GMAC4 cores, 15:8 are
documented as userver, and 31:16 are marked as reserved.
Note that the dev_info() also prints 15:8 as "User ID" not "Device ID".
To confirm, is the XGMAC version register at offset 0x20 ? Later GMAC
cores moved it to 0x110.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
^ permalink raw reply
* Re: [PATCH v2 8/8] arm64: dts: qcom: eliza: Add support for MM clock controllers
From: Bryan O'Donoghue @ 2026-04-10 8:26 UTC (permalink / raw)
To: Taniya Das, Bjorn Andersson, Michael Turquette, Stephen Boyd,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Konrad Dybcio,
Maxime Coquelin, Alexandre Torgue
Cc: Ajit Pandey, Imran Shaik, Jagadeesh Kona, linux-arm-msm,
linux-clk, devicetree, linux-kernel, linux-stm32,
linux-arm-kernel
In-Reply-To: <328b388c-438e-4f91-9384-0dad903355a5@oss.qualcomm.com>
On 10/04/2026 04:55, Taniya Das wrote:
>> Why do these two controllers have no power-domains ?
> Bryan, on Eliza the videocc and camcc are connected on CX and MXA.
Shouldn't you at least have:
power-domains = <&rpmhpd RPMHPD_CX> ?
And even
power-domains = <&rpmhpd RPMHPD_MX>,
<&rpmhpd RPMHPD_CX>;
power-domain-names = "mx",
"cx";
Konrad's suggestion to me was that MXA should have a vote in my CSIPHY
series I think he and Jagadeesh discussed it but I'm not sure if they
_concluded_ what was the right thing to do.
Right now I'm representing the dependency. MXA is always on ... and
there's nothing to do voting for it @ MX ?
---
bod
^ permalink raw reply
* RE: [PATCH v6 06/10] clk: realtek: Add support for mux clock
From: Yu-Chun Lin [林祐君] @ 2026-04-10 8:24 UTC (permalink / raw)
To: Brian Masney
Cc: mturquette@baylibre.com, sboyd@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, p.zabel@pengutronix.de,
Edgar Lee [李承諭], afaerber@suse.com,
Jyan Chou [周芷安], devicetree@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-realtek-soc@lists.infradead.org,
James Tai [戴志峰],
CY_Huang[黃鉦晏],
Stanley Chang[昌育德]
In-Reply-To: <ac_UkRiqWb6fSc1I@redhat.com>
Hi Brian,
> Hi Yu-Chun and Cheng-Yu,
>
> On Thu, Apr 02, 2026 at 03:39:53PM +0800, Yu-Chun Lin wrote:
> > From: Cheng-Yu Lee <cylee12@realtek.com>
> >
> > Add a simple regmap-based clk_ops implementation for Realtek mux clocks.
> >
> > The implementation supports parent selection and rate determination
> > through regmap-backed register access.
> >
> > Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
> > Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
> > Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
> > ---
> > Changes in v6:
> > - Add the headers used in c file to follow the "Include What You Use"
> principle.
> > ---
> > drivers/clk/realtek/Makefile | 1 +
> > drivers/clk/realtek/clk-regmap-mux.c | 48
> > ++++++++++++++++++++++++++++ drivers/clk/realtek/clk-regmap-mux.h |
> > 43 +++++++++++++++++++++++++
> > 3 files changed, 92 insertions(+)
> > create mode 100644 drivers/clk/realtek/clk-regmap-mux.c
> > create mode 100644 drivers/clk/realtek/clk-regmap-mux.h
> >
> > diff --git a/drivers/clk/realtek/Makefile
> > b/drivers/clk/realtek/Makefile index 74375f8127ac..f90dc57fcfdb 100644
> > --- a/drivers/clk/realtek/Makefile
> > +++ b/drivers/clk/realtek/Makefile
> > @@ -5,4 +5,5 @@ clk-rtk-y += common.o
> >
> > clk-rtk-y += clk-pll.o
> > clk-rtk-y += clk-regmap-gate.o
> > +clk-rtk-y += clk-regmap-mux.o
> > clk-rtk-y += freq_table.o
> > diff --git a/drivers/clk/realtek/clk-regmap-mux.c
> > b/drivers/clk/realtek/clk-regmap-mux.c
> > new file mode 100644
> > index 000000000000..068b056d61f0
> > --- /dev/null
> > +++ b/drivers/clk/realtek/clk-regmap-mux.c
> > @@ -0,0 +1,48 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (C) 2017 Realtek Semiconductor Corporation
> > + * Author: Cheng-Yu Lee <cylee12@realtek.com> */
> > +
> > +#include <linux/regmap.h>
> > +#include <linux/clk-provider.h>
>
> Sort the includes.
>
Ack.
> > +#include "clk-regmap-mux.h"
> > +
> > +static u8 clk_regmap_mux_get_parent(struct clk_hw *hw) {
> > + struct clk_regmap_mux *clkm = to_clk_regmap_mux(hw);
> > + int num_parents = clk_hw_get_num_parents(hw);
> > + u32 val;
> > + int ret;
> > +
> > + ret = regmap_read(clkm->clkr.regmap, clkm->mux_ofs, &val);
> > + if (ret)
> > + return 0;
>
> This is another case where it'd be nice to get the get_parent declaration fixed.
> Stephen recently linked to some work of his from 2022 here.
>
> https://lore.kernel.org/linux-clk/177431305509.5403.15386021337517970667
> @lazor/
>
> There's nothing for you to do right now.
>
> > +
> > + val = val >> clkm->shift & clkm->mask;
>
> I know there's the order of operations, however for clarity I would just include
> some () here to make it clear the expected order.
Ack.
> > +
> > + if (val >= num_parents)
>
> Remove newline before if.
Ack.
>
> > + return 0;
> > +
> > + return val;
>
> Or you could just use a ternary operator:
>
> return val >= num_parents ? 0 : val;
>
Ack.
> > +}
> > +
> > +static int clk_regmap_mux_set_parent(struct clk_hw *hw, u8 index) {
> > + struct clk_regmap_mux *clkm = to_clk_regmap_mux(hw);
> > +
> > + return regmap_update_bits(clkm->clkr.regmap, clkm->mux_ofs,
> > + clkm->mask << clkm->shift, index <<
> > +clkm->shift); }
> > +
> > +const struct clk_ops rtk_clk_regmap_mux_ops = {
> > + .set_parent = clk_regmap_mux_set_parent,
> > + .get_parent = clk_regmap_mux_get_parent,
> > + .determine_rate = __clk_mux_determine_rate, };
> > +EXPORT_SYMBOL_NS_GPL(rtk_clk_regmap_mux_ops, "REALTEK_CLK");
> > +
> > +const struct clk_ops rtk_clk_regmap_mux_ro_ops = {
> > + .get_parent = clk_regmap_mux_get_parent, };
> > +EXPORT_SYMBOL_NS_GPL(rtk_clk_regmap_mux_ro_ops, "REALTEK_CLK");
>
> rtk_clk_regmap_mux_ro_ops is exported, however the declaration is not
> actually declared in any header files.
>
> Brian
Since it is currently unused, I will drop the 'rtk_clk_regmap_mux_ro_ops'
implementation.
Best Regards,
Yu-Chun.
^ permalink raw reply
* Re: [PATCH v6 05/10] clk: realtek: Add support for gate clock
From: Yu-Chun Lin @ 2026-04-10 8:19 UTC (permalink / raw)
To: bmasney
Cc: afaerber, conor+dt, cy.huang, cylee12, devicetree, eleanor.lin,
james.tai, jyanchou, krzk+dt, linux-arm-kernel, linux-clk,
linux-kernel, linux-realtek-soc, mturquette, p.zabel, robh, sboyd,
stanley_chang
In-Reply-To: <ac_RcGSpVBpt3S7C@redhat.com>
Hi Brian,
> Hi Cheng-Yu,
>
> On Thu, Apr 02, 2026 at 03:39:52PM +0800, Yu-Chun Lin wrote:
> > From: Cheng-Yu Lee <cylee12@realtek.com>
> >
> > Introduce clk_regmap_gate_ops supporting enable, disable, is_enabled, and
> > disable_unused for standard regmap gate clocks.
>
> disable_unused is not implemented below.
>
Will remove it from commit message.
> >
> > Add clk_regmap_gate_ro_ops as a read-only variant exposing only is_enabled.
> >
> > Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
> > Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
> > Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
> > ---
> > Changes in v6:
> > - Add the headers used in c file to follow the "Include What You Use" principle.
> > ---
> > drivers/clk/realtek/Makefile | 2 +
> > drivers/clk/realtek/clk-regmap-gate.c | 69 +++++++++++++++++++++++++++
> > drivers/clk/realtek/clk-regmap-gate.h | 65 +++++++++++++++++++++++++
> > 3 files changed, 136 insertions(+)
> > create mode 100644 drivers/clk/realtek/clk-regmap-gate.c
> > create mode 100644 drivers/clk/realtek/clk-regmap-gate.h
> >
> > diff --git a/drivers/clk/realtek/Makefile b/drivers/clk/realtek/Makefile
> > index a89ad77993e9..74375f8127ac 100644
> > --- a/drivers/clk/realtek/Makefile
> > +++ b/drivers/clk/realtek/Makefile
> > @@ -2,5 +2,7 @@
> > obj-$(CONFIG_RTK_CLK_COMMON) += clk-rtk.o
> >
> > clk-rtk-y += common.o
> > +
> > clk-rtk-y += clk-pll.o
> > +clk-rtk-y += clk-regmap-gate.o
> > clk-rtk-y += freq_table.o
> > diff --git a/drivers/clk/realtek/clk-regmap-gate.c b/drivers/clk/realtek/clk-regmap-gate.c
> > new file mode 100644
> > index 000000000000..8738d6c6f8dd
> > --- /dev/null
> > +++ b/drivers/clk/realtek/clk-regmap-gate.c
> > @@ -0,0 +1,69 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (C) 2017 Realtek Semiconductor Corporation
> > + * Author: Cheng-Yu Lee <cylee12@realtek.com>
> > + */
> > +
> > +#include <linux/regmap.h>
> > +#include <linux/bits.h>
> > +#include "clk-regmap-gate.h"
> > +#include <linux/clk-provider.h>
>
> linux/clk-provider.h needs to be included before clk-regmap-gate.h.
>
Ack.
> Also Sashiko reports that linux/export.h should also be included.
https://sashiko.dev/#/patchset/20260402073957.2742459-1-eleanor.lin%40realtek.com
>
> Brian
Ack.
Best Regards,
Yu-Chun.
^ permalink raw reply
* Re: [PATCH net 1/1] net: stmmac: Update default_an_inband before passing value to phylink_config
From: KhaiWenTan @ 2026-04-10 7:53 UTC (permalink / raw)
To: linux
Cc: alexandre.torgue, andrew+netdev, davem, edumazet, hong.aun.looi,
khai.wen.tan, khai.wen.tan, kuba, linux-arm-kernel, linux-kernel,
linux-stm32, maxime.chevallier, mcoquelin.stm32, netdev,
ovidiu.panait.rb, pabeni, vladimir.oltean, yoong.siang.song
In-Reply-To: <adirrTJujEsrsK4F@shell.armlinux.org.uk>
Hi Russell,
Thanks for the review. I will address the comments in v2.
^ permalink raw reply
* Re: [PATCH v6 04/10] clk: realtek: Add support for phase locked loops (PLLs)
From: Yu-Chun Lin @ 2026-04-10 7:53 UTC (permalink / raw)
To: bmasney
Cc: afaerber, conor+dt, cy.huang, cylee12, devicetree, eleanor.lin,
james.tai, jyanchou, krzk+dt, linux-arm-kernel, linux-clk,
linux-kernel, linux-realtek-soc, mturquette, p.zabel, robh, sboyd,
stanley_chang
In-Reply-To: <ac_SX1UJRqiBH2iM@redhat.com>
Hi Brian,
> Hi Cheng-Yu and Yu-Chun,
>
> On Thu, Apr 02, 2026 at 03:39:51PM +0800, Yu-Chun Lin wrote:
> > From: Cheng-Yu Lee <cylee12@realtek.com>
> >
> > Provide a full set of PLL operations for programmable PLLs and a read-only
> > variant for fixed or hardware-managed PLLs.
> >
> > Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
> > Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
> > Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
> > ---
> > +static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> > + unsigned long parent_rate)
> > +{
> > + struct clk_pll *clkp = to_clk_pll(hw);
> > + const struct freq_table *fv;
> > + int ret;
> > +
> > + fv = ftbl_find_by_rate(clkp->freq_tbl, rate);
> > + if (!fv || fv->rate != rate)
> > + return -EINVAL;
> > +
> > + if (clkp->seq_pre_set_freq) {
> > + ret = regmap_multi_reg_write(clkp->clkr.regmap, clkp->seq_pre_set_freq,
> > + clkp->num_seq_pre_set_freq);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + ret = regmap_update_bits(clkp->clkr.regmap, clkp->freq_reg,
> > + clkp->freq_mask, fv->val);
> > + if (ret)
> > + return ret;
> > +
> > + if (clkp->seq_post_set_freq) {
> > + ret = regmap_multi_reg_write(clkp->clkr.regmap, clkp->seq_post_set_freq,
> > + clkp->num_seq_post_set_freq);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + if (is_power_on(clkp)) {
> > + ret = wait_freq_ready(clkp);
>
> I should have checked Sashiko before I hit send on my last review.
> https://sashiko.dev/#/patchset/20260402073957.2742459-1-eleanor.lin%40realtek.com
>
> It suggested the following:
>
> In the Common Clock Framework, .set_rate executes under the prepare_lock
> mutex, while .enable and .disable execute under the enable_lock spinlock.
>
> Could an interleaved clk_pll_enable() corrupt the hardware state by running
> its seq_power_on sequence concurrently with these multi-step register
> updates?
>
> There also appears to be a potential race condition later in this function:
>
> if (is_power_on(clkp)) {
> ret = wait_freq_ready(clkp);
> ...
> }
>
> If .disable() powers off the PLL right before wait_freq_ready() is called,
> will wait_freq_ready() poll a disabled PLL and erroneously return
> -ETIMEDOUT? Is a private spinlock needed to serialize these operations?
>
> Brian
>
Agreed, I will add a private spinlock here.
Best Regards,
Yu-Chun
^ permalink raw reply
* Re: [PATCH net 1/1] net: stmmac: Update default_an_inband before passing value to phylink_config
From: Russell King (Oracle) @ 2026-04-10 7:50 UTC (permalink / raw)
To: KhaiWenTan
Cc: andrew+netdev, davem, edumazet, kuba, pabeni, mcoquelin.stm32,
alexandre.torgue, maxime.chevallier, ovidiu.panait.rb,
vladimir.oltean, netdev, linux-stm32, linux-arm-kernel,
linux-kernel, yoong.siang.song, hong.aun.looi, khai.wen.tan
In-Reply-To: <20260410020735.327590-1-khai.wen.tan@linux.intel.com>
On Fri, Apr 10, 2026 at 10:07:35AM +0800, KhaiWenTan wrote:
> get_interfaces() will update both the plat->phy_interfaces and
> mdio_bus_data->default_an_inband based on reading a SERDES register.
>
> Therefore, we moved the priv->plat->get_interfaces() to be executed
> first before assigning mdio_bus_data->default_an_inband to
> config->default_an_inband to ensure default_an_inband is in correct
> value during PHY setup.
>
> Fixes: ca732e990fc8 ("net: stmmac: add get_interfaces() platform method")
> Signed-off-by: KhaiWenTan <khai.wen.tan@linux.intel.com>
Patch looks good, but the blamed commit is wrong.
d3836052fe09 ("net: stmmac: intel: convert speed_mode_2500() to get_interfaces()")
introduced the problem.
The commit message could also do with mentioning that dwmac-intel
regressed result of that commit.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
^ permalink raw reply
* Re: [PATCH v2 3/8] dt-bindings: clock: qcom: Add support for CAMCC for Eliza
From: Krzysztof Kozlowski @ 2026-04-10 7:47 UTC (permalink / raw)
To: Taniya Das
Cc: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Konrad Dybcio, Maxime Coquelin,
Alexandre Torgue, Ajit Pandey, Imran Shaik, Jagadeesh Kona,
linux-arm-msm, linux-clk, devicetree, linux-kernel, linux-stm32,
linux-arm-kernel
In-Reply-To: <20260409-eliza_mm_cc_v2-v2-3-bc0c6dd77bc5@oss.qualcomm.com>
On Thu, Apr 09, 2026 at 11:40:44PM +0530, Taniya Das wrote:
> Update the compatible and the bindings for CAMCC support on Eliza SoC.
I do not see any update here. Also, no improvements after v1 comments.
Best regards,
Krzysztof
^ permalink raw reply
* Re: [PATCH v13 10/17] drm/bridge: analogix_dp: Pass struct drm_atomic_state* for analogix_dp_bridge_mode_set()
From: Luca Ceresoli @ 2026-04-10 7:45 UTC (permalink / raw)
To: Damon Ding, andrzej.hajda, neil.armstrong, rfoss,
maarten.lankhorst, mripard, tzimmermann, airlied, simona,
victor.liu, Frank.Li, shawnguo, s.hauer, inki.dae, sw0312.kim,
kyungmin.park, krzk, jingoohan1, p.zabel, hjc, heiko, andy.yan
Cc: Laurent.pinchart, jonas, jernej.skrabec, kernel, festevam,
alim.akhtar, dmitry.baryshkov, nicolas.frattaroli, dianders,
m.szyprowski, linux-kernel, dri-devel, imx, linux-arm-kernel,
linux-samsung-soc, linux-rockchip
In-Reply-To: <20260409065301.446670-11-damon.ding@rock-chips.com>
On Thu Apr 9, 2026 at 8:52 AM CEST, Damon Ding wrote:
> To avoid using &analogix_dp_device.connector for compatibility
> with the bridge connector framework, get &drm_connector from
> &drm_atomic_state instead.
>
> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply
* Re: [PATCH v2 8/8] arm64: dts: qcom: eliza: Add support for MM clock controllers
From: Krzysztof Kozlowski @ 2026-04-10 7:44 UTC (permalink / raw)
To: Taniya Das
Cc: Bjorn Andersson, Michael Turquette, Stephen Boyd, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Konrad Dybcio, Maxime Coquelin,
Alexandre Torgue, Ajit Pandey, Imran Shaik, Jagadeesh Kona,
linux-arm-msm, linux-clk, devicetree, linux-kernel, linux-stm32,
linux-arm-kernel
In-Reply-To: <20260409-eliza_mm_cc_v2-v2-8-bc0c6dd77bc5@oss.qualcomm.com>
On Thu, Apr 09, 2026 at 11:40:49PM +0530, Taniya Das wrote:
> Add the device nodes for the multimedia clock controllers (cambistmclkcc,
> camcc, videocc, gpucc) for Qualcomm Eliza SoC.
>
> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
> ---
> arch/arm64/boot/dts/qcom/eliza.dtsi | 54 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
Note that this patch and drivers parches were likely not tested.
Please mark patches you wish others to test as RFT.
Best regards,
Krzysztof
^ permalink raw reply
* RE: [PATCH v6 04/10] clk: realtek: Add support for phase locked loops (PLLs)
From: Yu-Chun Lin [林祐君] @ 2026-04-10 7:43 UTC (permalink / raw)
To: Brian Masney
Cc: mturquette@baylibre.com, sboyd@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, p.zabel@pengutronix.de,
Edgar Lee [李承諭], afaerber@suse.com,
Jyan Chou [周芷安], devicetree@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-realtek-soc@lists.infradead.org,
James Tai [戴志峰],
CY_Huang[黃鉦晏],
Stanley Chang[昌育德]
In-Reply-To: <ac_QBGY8VxcvuVlY@redhat.com>
Hi Brian,
> Hi Cheng-Yu,
>
> On Thu, Apr 02, 2026 at 03:39:51PM +0800, Yu-Chun Lin wrote:
> > From: Cheng-Yu Lee <cylee12@realtek.com>
> >
> > Provide a full set of PLL operations for programmable PLLs and a
> > read-only variant for fixed or hardware-managed PLLs.
> >
> > Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
> > Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
> > Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
> > ---
> > Changes in v6:
> > - Add the headers used in c file to follow the "Include What You Use"
> principle.
> > - Move to_clk_pll() from clk-pll.h to clk-pll.c to limit its scope.
> > ---
> > drivers/clk/realtek/Makefile | 2 +
> > drivers/clk/realtek/clk-pll.c | 164
> +++++++++++++++++++++++++++++++
> > drivers/clk/realtek/clk-pll.h | 42 ++++++++
> > drivers/clk/realtek/freq_table.c | 36 +++++++
> > drivers/clk/realtek/freq_table.h | 21 ++++
> > 5 files changed, 265 insertions(+)
> > create mode 100644 drivers/clk/realtek/clk-pll.c create mode 100644
> > drivers/clk/realtek/clk-pll.h create mode 100644
> > drivers/clk/realtek/freq_table.c create mode 100644
> > drivers/clk/realtek/freq_table.h
> >
> > diff --git a/drivers/clk/realtek/Makefile
> > b/drivers/clk/realtek/Makefile index 377ec776ee47..a89ad77993e9 100644
> > --- a/drivers/clk/realtek/Makefile
> > +++ b/drivers/clk/realtek/Makefile
> > @@ -2,3 +2,5 @@
> > obj-$(CONFIG_RTK_CLK_COMMON) += clk-rtk.o
> >
> > clk-rtk-y += common.o
> > +clk-rtk-y += clk-pll.o
> > +clk-rtk-y += freq_table.o
> > diff --git a/drivers/clk/realtek/clk-pll.c
> > b/drivers/clk/realtek/clk-pll.c new file mode 100644 index
> > 000000000000..44730b22a94c
> > --- /dev/null
> > +++ b/drivers/clk/realtek/clk-pll.c
> > @@ -0,0 +1,164 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (C) 2024 Realtek Semiconductor Corporation
> > + * Author: Cheng-Yu Lee <cylee12@realtek.com> */
> > +
> > +#include <linux/regmap.h>
> > +#include "clk-pll.h"
> > +
> > +#define TIMEOUT 2000
> > +
> > +static inline struct clk_pll *to_clk_pll(struct clk_hw *hw) {
> > + struct clk_regmap *clkr = to_clk_regmap(hw);
> > +
> > + return container_of(clkr, struct clk_pll, clkr); }
> > +
> > +static int wait_freq_ready(struct clk_pll *clkp) {
> > + u32 pollval;
> > +
> > + if (!clkp->freq_ready_valid)
> > + return 0;
> > +
> > + return regmap_read_poll_timeout_atomic(clkp->clkr.regmap,
> clkp->freq_ready_reg, pollval,
> > + (pollval &
> clkp->freq_ready_mask)
> > + ==
> clkp->freq_ready_val,
> > + 0, TIMEOUT);
>
> I would put the "(pollval & clkp->freq_ready_mask) == clkp->freq_ready_val"
> on the same line to improve readability. You can go out to 100 characters.
>
> Also should the delay be greater than 0 to avoid tons of constant retries?
>
Since aligning with the open parenthesis would exceed the 100-character limit,
I will use an extra tab for the continuation line.
Also, I have increased the delay_us parameter to 1 to avoid constant retries.
The code will look like this:
return regmap_read_poll_timeout_atomic(clkp->clkr.regmap, clkp->freq_ready_reg, pollval,
(pollval & clkp->freq_ready_mask) == clkp->freq_ready_val, 1, TIMEOUT);
> > +}
> > +
> > +static bool is_power_on(struct clk_pll *clkp) {
> > + u32 val;
> > +
> > + if (!clkp->power_reg)
> > + return true;
> > +
> > + if (regmap_read(clkp->clkr.regmap, clkp->power_reg, &val))
> > + return true;
>
> Is the intention if there is an error, then it marks it as success?
>
Returning true here is a conservative design choice. When reading the power
status fails, returning true prevents unconditionally turning off the clock.
> > +
> > + return (val & clkp->power_mask) == clkp->power_val_on; }
> > +
> > +static void clk_pll_disable(struct clk_hw *hw) {
> > + struct clk_pll *clkp = to_clk_pll(hw);
> > +
> > + if (!clkp->seq_power_off)
> > + return;
> > +
> > + regmap_multi_reg_write(clkp->clkr.regmap, clkp->seq_power_off,
> > + clkp->num_seq_power_off); }
> > +
> > +static int clk_pll_is_enabled(struct clk_hw *hw) {
> > + struct clk_pll *clkp = to_clk_pll(hw);
> > +
> > + return is_power_on(clkp);
> > +}
> > +
> > +static int clk_pll_determine_rate(struct clk_hw *hw,
> > + struct clk_rate_request *req) {
> > + struct clk_pll *clkp = to_clk_pll(hw);
> > + const struct freq_table *ftblv = NULL;
> > +
> > + ftblv = ftbl_find_by_rate(clkp->freq_tbl, req->rate);
> > + if (!ftblv)
> > + return -EINVAL;
> > +
> > + req->rate = ftblv->rate;
> > + return 0;
>
> Add newline before return.
>
Ack.
> > +}
> > +
> > +static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
> > + unsigned long parent_rate) {
> > + struct clk_pll *clkp = to_clk_pll(hw);
> > + const struct freq_table *fv;
> > + u32 freq_val;
> > +
> > + if (regmap_read(clkp->clkr.regmap, clkp->freq_reg, &freq_val))
> > + return 0;
> > +
> > + freq_val &= clkp->freq_mask;
> > +
> > + fv = ftbl_find_by_val_with_mask(clkp->freq_tbl, clkp->freq_mask,
> > + freq_val);
> > + return fv ? fv->rate : 0;
>
> Add newline before return.
>
Ack.
> > +}
> > +
(snip)
> > index 000000000000..272a10e75a54
> > --- /dev/null
> > +++ b/drivers/clk/realtek/freq_table.c
> > @@ -0,0 +1,36 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +
> > +#include <linux/bitops.h>
> > +#include "freq_table.h"
> > +
> > +const struct freq_table *ftbl_find_by_rate(const struct freq_table *ftbl,
> > + unsigned long rate) {
> > + unsigned long best_rate = 0;
> > + const struct freq_table *best = NULL;
>
> Put variables in reverse Christmas tree order.
Ack
>
> > +
> > + for (; !IS_FREQ_TABLE_END(ftbl); ftbl++) {
> > + if (ftbl->rate == rate)
> > + return ftbl;
> > +
> > + if (ftbl->rate > rate)
> > + continue;
> > +
> > + if (ftbl->rate > best_rate) {
> > + best_rate = ftbl->rate;
> > + best = ftbl;
> > + }
> > + }
> > +
> > + return best;
> > +}
> > +
> > +const struct freq_table *
> > +ftbl_find_by_val_with_mask(const struct freq_table *ftbl, u32 mask,
> > +u32 value) {
> > + for (; !IS_FREQ_TABLE_END(ftbl); ftbl++) {
> > + if ((ftbl->val & mask) == (value & mask))
> > + return ftbl;
> > + }
> > + return NULL;
> > +};
> > diff --git a/drivers/clk/realtek/freq_table.h
> > b/drivers/clk/realtek/freq_table.h
> > new file mode 100644
> > index 000000000000..6d9116651105
> > --- /dev/null
> > +++ b/drivers/clk/realtek/freq_table.h
> > @@ -0,0 +1,21 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +
> > +struct freq_table {
> > + u32 val;
> > + unsigned long rate;
> > +};
> > +
> > +/* ofs check */
> > +#define CLK_OFS_INVALID -1
> > +#define CLK_OFS_IS_VALID(_ofs) ((_ofs) != CLK_OFS_INVALID)
>
> Is this used anywhere?
I will drop them.
Best Regards,
Yu-Chun
>
> Brian
^ permalink raw reply
* [PATCH v2 5/5] coresight: etm3x: fix inconsistencies with sysfs configration
From: Yeoreum Yun @ 2026-04-10 7:43 UTC (permalink / raw)
To: coresight, linux-arm-kernel, linux-kernel
Cc: suzuki.poulose, mike.leach, james.clark, alexander.shishkin,
leo.yan, Yeoreum Yun
In-Reply-To: <20260410074310.2693385-1-yeoreum.yun@arm.com>
The current ETM3x configuration via sysfs can lead to the following
inconsistencies:
- If a configuration is modified via sysfs while a perf session is
active, the running configuration may differ between before
a sched-out and after a subsequent sched-in.
To resolve these inconsistencies, the configuration should be separated into:
- active_config, which is applied configuration for the current session
- config, which stores the settings configured via sysfs.
and apply configuration after taking a mode.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
---
drivers/hwtracing/coresight/coresight-etm.h | 2 ++
.../coresight/coresight-etm3x-core.c | 20 ++++++++++++-------
2 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm.h b/drivers/hwtracing/coresight/coresight-etm.h
index 6fda26039db8..9ed5e2361be1 100644
--- a/drivers/hwtracing/coresight/coresight-etm.h
+++ b/drivers/hwtracing/coresight/coresight-etm.h
@@ -241,6 +241,7 @@ struct etm_config {
* @boot_enable:true if we should start tracing at boot time.
* @os_unlock: true if access to management registers is allowed.
* @traceid: value of the current ID for this component.
+ * @active_config: structure holding current running configuration parameters.
* @config: structure holding configuration parameters.
*/
struct etm_drvdata {
@@ -256,6 +257,7 @@ struct etm_drvdata {
bool boot_enable;
bool os_unlock;
u32 traceid;
+ struct etm_config active_config;
struct etm_config config;
};
diff --git a/drivers/hwtracing/coresight/coresight-etm3x-core.c b/drivers/hwtracing/coresight/coresight-etm3x-core.c
index b7e977defb1c..0afe2275aa27 100644
--- a/drivers/hwtracing/coresight/coresight-etm3x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm3x-core.c
@@ -308,7 +308,7 @@ void etm_config_trace_mode(struct etm_config *config)
static int etm_parse_event_config(struct etm_drvdata *drvdata,
struct perf_event *event)
{
- struct etm_config *config = &drvdata->config;
+ struct etm_config *config = &drvdata->active_config;
struct perf_event_attr *attr = &event->attr;
u8 ts_level;
@@ -368,7 +368,7 @@ static int etm_enable_hw(struct etm_drvdata *drvdata)
int i, rc;
u32 etmcr;
const struct etm_caps *caps = &drvdata->caps;
- struct etm_config *config = &drvdata->config;
+ struct etm_config *config = &drvdata->active_config;
struct coresight_device *csdev = drvdata->csdev;
CS_UNLOCK(drvdata->csa.base);
@@ -442,24 +442,30 @@ static int etm_enable_hw(struct etm_drvdata *drvdata)
struct etm_enable_arg {
struct etm_drvdata *drvdata;
+ u32 traceid;
int rc;
};
static void etm_enable_sysfs_smp_call(void *info)
{
struct etm_enable_arg *arg = info;
+ struct etm_drvdata *drvdata;
struct coresight_device *csdev;
if (WARN_ON(!arg))
return;
- csdev = arg->drvdata->csdev;
+ drvdata = arg->drvdata;
+ csdev = drvdata->csdev;
if (!coresight_take_mode(csdev, CS_MODE_SYSFS)) {
/* Someone is already using the tracer */
arg->rc = -EBUSY;
return;
}
+ drvdata->active_config = drvdata->config;
+ drvdata->traceid = arg->traceid;
+
arg->rc = etm_enable_hw(arg->drvdata);
/* The tracer didn't start */
@@ -514,14 +520,13 @@ static int etm_enable_sysfs(struct coresight_device *csdev, struct coresight_pat
spin_lock(&drvdata->spinlock);
- drvdata->traceid = path->trace_id;
-
/*
* Configure the ETM only if the CPU is online. If it isn't online
* hw configuration will take place on the local CPU during bring up.
*/
if (cpu_online(drvdata->cpu)) {
arg.drvdata = drvdata;
+ arg.traceid = path->trace_id;
ret = smp_call_function_single(drvdata->cpu,
etm_enable_sysfs_smp_call, &arg, 1);
if (!ret)
@@ -564,7 +569,7 @@ static int etm_enable(struct coresight_device *csdev, struct perf_event *event,
static void etm_disable_hw(struct etm_drvdata *drvdata)
{
int i;
- struct etm_config *config = &drvdata->config;
+ struct etm_config *config = &drvdata->active_config;
struct coresight_device *csdev = drvdata->csdev;
CS_UNLOCK(drvdata->csa.base);
@@ -882,7 +887,8 @@ static int etm_probe(struct amba_device *adev, const struct amba_id *id)
if (etm_arch_supported(drvdata->arch) == false)
return -EINVAL;
- etm_set_default(&drvdata->config);
+ etm_set_default(&drvdata->active_config);
+ drvdata->config = drvdata->active_config;
pdata = coresight_get_platform_data(dev);
if (IS_ERR(pdata))
--
LEVI:{C3F47F37-75D8-414A-A8BA-3980EC8A46D7}
^ permalink raw reply related
* [PATCH v2 1/5] coresight: etm4x: introduce struct etm4_caps
From: Yeoreum Yun @ 2026-04-10 7:43 UTC (permalink / raw)
To: coresight, linux-arm-kernel, linux-kernel
Cc: suzuki.poulose, mike.leach, james.clark, alexander.shishkin,
leo.yan, Yeoreum Yun
In-Reply-To: <20260410074310.2693385-1-yeoreum.yun@arm.com>
introduce struct etm4_caps to describe ETMv4 capabilities
and move capabilities information into it.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
---
.../coresight/coresight-etm4x-core.c | 234 +++++++++---------
.../coresight/coresight-etm4x-sysfs.c | 185 ++++++++------
drivers/hwtracing/coresight/coresight-etm4x.h | 175 ++++++-------
3 files changed, 327 insertions(+), 267 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index d565a73f0042..6443f3717b37 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -88,8 +88,9 @@ static int etm4_probe_cpu(unsigned int cpu);
*/
static bool etm4x_sspcicrn_present(struct etmv4_drvdata *drvdata, int n)
{
- return (n < drvdata->nr_ss_cmp) &&
- drvdata->nr_pe &&
+ const struct etmv4_caps *caps = &drvdata->caps;
+
+ return (n < caps->nr_ss_cmp) && caps->nr_pe &&
(drvdata->config.ss_status[n] & TRCSSCSRn_PC);
}
@@ -160,17 +161,20 @@ static void ete_sysreg_write(u64 val, u32 offset, bool _relaxed, bool _64bit)
static void etm_detect_os_lock(struct etmv4_drvdata *drvdata,
struct csdev_access *csa)
{
+ struct etmv4_caps *caps = &drvdata->caps;
u32 oslsr = etm4x_relaxed_read32(csa, TRCOSLSR);
- drvdata->os_lock_model = ETM_OSLSR_OSLM(oslsr);
+ caps->os_lock_model = ETM_OSLSR_OSLM(oslsr);
}
static void etm_write_os_lock(struct etmv4_drvdata *drvdata,
struct csdev_access *csa, u32 val)
{
+ const struct etmv4_caps *caps = &drvdata->caps;
+
val = !!val;
- switch (drvdata->os_lock_model) {
+ switch (caps->os_lock_model) {
case ETM_OSLOCK_PRESENT:
etm4x_relaxed_write32(csa, val, TRCOSLAR);
break;
@@ -179,7 +183,7 @@ static void etm_write_os_lock(struct etmv4_drvdata *drvdata,
break;
default:
pr_warn_once("CPU%d: Unsupported Trace OSLock model: %x\n",
- smp_processor_id(), drvdata->os_lock_model);
+ smp_processor_id(), caps->os_lock_model);
fallthrough;
case ETM_OSLOCK_NI:
return;
@@ -494,6 +498,7 @@ static int etm4_enable_trace_unit(struct etmv4_drvdata *drvdata)
static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
{
int i, rc;
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
struct coresight_device *csdev = drvdata->csdev;
struct device *etm_dev = &csdev->dev;
@@ -525,14 +530,14 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
if (etm4x_wait_status(csa, TRCSTATR_IDLE_BIT, 1))
dev_err(etm_dev,
"timeout while waiting for Idle Trace Status\n");
- if (drvdata->nr_pe)
+ if (caps->nr_pe)
etm4x_relaxed_write32(csa, config->pe_sel, TRCPROCSELR);
etm4x_relaxed_write32(csa, config->cfg, TRCCONFIGR);
/* nothing specific implemented */
etm4x_relaxed_write32(csa, 0x0, TRCAUXCTLR);
etm4x_relaxed_write32(csa, config->eventctrl0, TRCEVENTCTL0R);
etm4x_relaxed_write32(csa, config->eventctrl1, TRCEVENTCTL1R);
- if (drvdata->stallctl)
+ if (caps->stallctl)
etm4x_relaxed_write32(csa, config->stall_ctrl, TRCSTALLCTLR);
etm4x_relaxed_write32(csa, config->ts_ctrl, TRCTSCTLR);
etm4x_relaxed_write32(csa, config->syncfreq, TRCSYNCPR);
@@ -542,17 +547,17 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
etm4x_relaxed_write32(csa, config->vinst_ctrl, TRCVICTLR);
etm4x_relaxed_write32(csa, config->viiectlr, TRCVIIECTLR);
etm4x_relaxed_write32(csa, config->vissctlr, TRCVISSCTLR);
- if (drvdata->nr_pe_cmp)
+ if (caps->nr_pe_cmp)
etm4x_relaxed_write32(csa, config->vipcssctlr, TRCVIPCSSCTLR);
- for (i = 0; i < drvdata->nrseqstate - 1; i++)
+ for (i = 0; i < caps->nrseqstate - 1; i++)
etm4x_relaxed_write32(csa, config->seq_ctrl[i], TRCSEQEVRn(i));
- if (drvdata->nrseqstate) {
+ if (caps->nrseqstate) {
etm4x_relaxed_write32(csa, config->seq_rst, TRCSEQRSTEVR);
etm4x_relaxed_write32(csa, config->seq_state, TRCSEQSTR);
}
- if (drvdata->numextinsel)
+ if (caps->numextinsel)
etm4x_relaxed_write32(csa, config->ext_inp, TRCEXTINSELR);
- for (i = 0; i < drvdata->nr_cntr; i++) {
+ for (i = 0; i < caps->nr_cntr; i++) {
etm4x_relaxed_write32(csa, config->cntrldvr[i], TRCCNTRLDVRn(i));
etm4x_relaxed_write32(csa, config->cntr_ctrl[i], TRCCNTCTLRn(i));
etm4x_relaxed_write32(csa, config->cntr_val[i], TRCCNTVRn(i));
@@ -562,10 +567,10 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
* Resource selector pair 0 is always implemented and reserved. As
* such start at 2.
*/
- for (i = 2; i < drvdata->nr_resource * 2; i++)
+ for (i = 2; i < caps->nr_resource * 2; i++)
etm4x_relaxed_write32(csa, config->res_ctrl[i], TRCRSCTLRn(i));
- for (i = 0; i < drvdata->nr_ss_cmp; i++) {
+ for (i = 0; i < caps->nr_ss_cmp; i++) {
/* always clear status bit on restart if using single-shot */
if (config->ss_ctrl[i] || config->ss_pe_cmp[i])
config->ss_status[i] &= ~TRCSSCSRn_STATUS;
@@ -574,23 +579,23 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
if (etm4x_sspcicrn_present(drvdata, i))
etm4x_relaxed_write32(csa, config->ss_pe_cmp[i], TRCSSPCICRn(i));
}
- for (i = 0; i < drvdata->nr_addr_cmp * 2; i++) {
+ for (i = 0; i < caps->nr_addr_cmp * 2; i++) {
etm4x_relaxed_write64(csa, config->addr_val[i], TRCACVRn(i));
etm4x_relaxed_write64(csa, config->addr_acc[i], TRCACATRn(i));
}
- for (i = 0; i < drvdata->numcidc; i++)
+ for (i = 0; i < caps->numcidc; i++)
etm4x_relaxed_write64(csa, config->ctxid_pid[i], TRCCIDCVRn(i));
etm4x_relaxed_write32(csa, config->ctxid_mask0, TRCCIDCCTLR0);
- if (drvdata->numcidc > 4)
+ if (caps->numcidc > 4)
etm4x_relaxed_write32(csa, config->ctxid_mask1, TRCCIDCCTLR1);
- for (i = 0; i < drvdata->numvmidc; i++)
+ for (i = 0; i < caps->numvmidc; i++)
etm4x_relaxed_write64(csa, config->vmid_val[i], TRCVMIDCVRn(i));
etm4x_relaxed_write32(csa, config->vmid_mask0, TRCVMIDCCTLR0);
- if (drvdata->numvmidc > 4)
+ if (caps->numvmidc > 4)
etm4x_relaxed_write32(csa, config->vmid_mask1, TRCVMIDCCTLR1);
- if (!drvdata->skip_power_up) {
+ if (!caps->skip_power_up) {
u32 trcpdcr = etm4x_relaxed_read32(csa, TRCPDCR);
/*
@@ -666,19 +671,20 @@ static int etm4_config_timestamp_event(struct etmv4_drvdata *drvdata,
{
int ctridx;
int rselector;
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
/* No point in trying if we don't have at least one counter */
- if (!drvdata->nr_cntr)
+ if (!caps->nr_cntr)
return -EINVAL;
/* Find a counter that hasn't been initialised */
- for (ctridx = 0; ctridx < drvdata->nr_cntr; ctridx++)
+ for (ctridx = 0; ctridx < caps->nr_cntr; ctridx++)
if (config->cntr_val[ctridx] == 0)
break;
/* All the counters have been configured already, bail out */
- if (ctridx == drvdata->nr_cntr) {
+ if (ctridx == caps->nr_cntr) {
pr_debug("%s: no available counter found\n", __func__);
return -ENOSPC;
}
@@ -694,11 +700,11 @@ static int etm4_config_timestamp_event(struct etmv4_drvdata *drvdata,
* ETMIDR4 gives the number of resource selector _pairs_, hence multiply
* by 2.
*/
- for (rselector = 2; rselector < drvdata->nr_resource * 2; rselector++)
+ for (rselector = 2; rselector < caps->nr_resource * 2; rselector++)
if (!config->res_ctrl[rselector])
break;
- if (rselector == drvdata->nr_resource * 2) {
+ if (rselector == caps->nr_resource * 2) {
pr_debug("%s: no available resource selector found\n",
__func__);
return -ENOSPC;
@@ -749,6 +755,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev,
{
int ret = 0;
struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
struct perf_event_attr max_timestamp = {
.ATTR_CFG_FLD_timestamp_CFG = U64_MAX,
@@ -788,8 +795,8 @@ static int etm4_parse_event_config(struct coresight_device *csdev,
cc_threshold = ATTR_CFG_GET_FLD(attr, cc_threshold);
if (!cc_threshold)
cc_threshold = ETM_CYC_THRESHOLD_DEFAULT;
- if (cc_threshold < drvdata->ccitmin)
- cc_threshold = drvdata->ccitmin;
+ if (cc_threshold < caps->ccitmin)
+ cc_threshold = caps->ccitmin;
config->ccctlr = cc_threshold;
}
@@ -837,7 +844,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev,
}
/* return stack - enable if selected and supported */
- if (ATTR_CFG_GET_FLD(attr, retstack) && drvdata->retstack)
+ if (ATTR_CFG_GET_FLD(attr, retstack) && caps->retstack)
/* bit[12], Return stack enable bit */
config->cfg |= TRCCONFIGR_RS;
@@ -853,7 +860,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev,
/* branch broadcast - enable if selected and supported */
if (ATTR_CFG_GET_FLD(attr, branch_broadcast)) {
- if (!drvdata->trcbb) {
+ if (!caps->trcbb) {
/*
* Missing BB support could cause silent decode errors
* so fail to open if it's not supported.
@@ -1028,6 +1035,7 @@ static void etm4_disable_trace_unit(struct etmv4_drvdata *drvdata)
static void etm4_disable_hw(struct etmv4_drvdata *drvdata)
{
u32 control;
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
struct coresight_device *csdev = drvdata->csdev;
struct csdev_access *csa = &csdev->access;
@@ -1036,7 +1044,7 @@ static void etm4_disable_hw(struct etmv4_drvdata *drvdata)
etm4_cs_unlock(drvdata, csa);
etm4_disable_arch_specific(drvdata);
- if (!drvdata->skip_power_up) {
+ if (!caps->skip_power_up) {
/* power can be removed from the trace unit now */
control = etm4x_relaxed_read32(csa, TRCPDCR);
control &= ~TRCPDCR_PU;
@@ -1046,13 +1054,13 @@ static void etm4_disable_hw(struct etmv4_drvdata *drvdata)
etm4_disable_trace_unit(drvdata);
/* read the status of the single shot comparators */
- for (i = 0; i < drvdata->nr_ss_cmp; i++) {
+ for (i = 0; i < caps->nr_ss_cmp; i++) {
config->ss_status[i] =
etm4x_relaxed_read32(csa, TRCSSCSRn(i));
}
/* read back the current counter values */
- for (i = 0; i < drvdata->nr_cntr; i++) {
+ for (i = 0; i < caps->nr_cntr; i++) {
config->cntr_val[i] =
etm4x_relaxed_read32(csa, TRCCNTVRn(i));
}
@@ -1350,7 +1358,7 @@ static struct midr_range etm_wrong_ccitmin_cpus[] = {
{},
};
-static void etm4_fixup_wrong_ccitmin(struct etmv4_drvdata *drvdata)
+static void etm4_fixup_wrong_ccitmin(struct etmv4_caps *caps)
{
/*
* Erratum affected cpus will read 256 as the minimum
@@ -1360,8 +1368,8 @@ static void etm4_fixup_wrong_ccitmin(struct etmv4_drvdata *drvdata)
* this problem.
*/
if (is_midr_in_range_list(etm_wrong_ccitmin_cpus)) {
- if (drvdata->ccitmin == 256)
- drvdata->ccitmin = 4;
+ if (caps->ccitmin == 256)
+ caps->ccitmin = 4;
}
}
@@ -1374,11 +1382,13 @@ static void etm4_init_arch_data(void *info)
u32 etmidr5;
struct etm4_init_arg *init_arg = info;
struct etmv4_drvdata *drvdata;
+ struct etmv4_caps *caps;
struct csdev_access *csa;
struct device *dev = init_arg->dev;
int i;
drvdata = dev_get_drvdata(init_arg->dev);
+ caps = &drvdata->caps;
csa = init_arg->csa;
/*
@@ -1391,7 +1401,7 @@ static void etm4_init_arch_data(void *info)
if (!csa->io_mem ||
fwnode_property_present(dev_fwnode(dev), "qcom,skip-power-up"))
- drvdata->skip_power_up = true;
+ caps->skip_power_up = true;
/* Detect the support for OS Lock before we actually use it */
etm_detect_os_lock(drvdata, csa);
@@ -1406,71 +1416,71 @@ static void etm4_init_arch_data(void *info)
etmidr0 = etm4x_relaxed_read32(csa, TRCIDR0);
/* INSTP0, bits[2:1] P0 tracing support field */
- drvdata->instrp0 = !!(FIELD_GET(TRCIDR0_INSTP0_MASK, etmidr0) == 0b11);
+ caps->instrp0 = !!(FIELD_GET(TRCIDR0_INSTP0_MASK, etmidr0) == 0b11);
/* TRCBB, bit[5] Branch broadcast tracing support bit */
- drvdata->trcbb = !!(etmidr0 & TRCIDR0_TRCBB);
+ caps->trcbb = !!(etmidr0 & TRCIDR0_TRCBB);
/* TRCCOND, bit[6] Conditional instruction tracing support bit */
- drvdata->trccond = !!(etmidr0 & TRCIDR0_TRCCOND);
+ caps->trccond = !!(etmidr0 & TRCIDR0_TRCCOND);
/* TRCCCI, bit[7] Cycle counting instruction bit */
- drvdata->trccci = !!(etmidr0 & TRCIDR0_TRCCCI);
+ caps->trccci = !!(etmidr0 & TRCIDR0_TRCCCI);
/* RETSTACK, bit[9] Return stack bit */
- drvdata->retstack = !!(etmidr0 & TRCIDR0_RETSTACK);
+ caps->retstack = !!(etmidr0 & TRCIDR0_RETSTACK);
/* NUMEVENT, bits[11:10] Number of events field */
- drvdata->nr_event = FIELD_GET(TRCIDR0_NUMEVENT_MASK, etmidr0);
+ caps->nr_event = FIELD_GET(TRCIDR0_NUMEVENT_MASK, etmidr0);
/* QSUPP, bits[16:15] Q element support field */
- drvdata->q_support = FIELD_GET(TRCIDR0_QSUPP_MASK, etmidr0);
- if (drvdata->q_support)
- drvdata->q_filt = !!(etmidr0 & TRCIDR0_QFILT);
+ caps->q_support = FIELD_GET(TRCIDR0_QSUPP_MASK, etmidr0);
+ if (caps->q_support)
+ caps->q_filt = !!(etmidr0 & TRCIDR0_QFILT);
/* TSSIZE, bits[28:24] Global timestamp size field */
- drvdata->ts_size = FIELD_GET(TRCIDR0_TSSIZE_MASK, etmidr0);
+ caps->ts_size = FIELD_GET(TRCIDR0_TSSIZE_MASK, etmidr0);
/* maximum size of resources */
etmidr2 = etm4x_relaxed_read32(csa, TRCIDR2);
/* CIDSIZE, bits[9:5] Indicates the Context ID size */
- drvdata->ctxid_size = FIELD_GET(TRCIDR2_CIDSIZE_MASK, etmidr2);
+ caps->ctxid_size = FIELD_GET(TRCIDR2_CIDSIZE_MASK, etmidr2);
/* VMIDSIZE, bits[14:10] Indicates the VMID size */
- drvdata->vmid_size = FIELD_GET(TRCIDR2_VMIDSIZE_MASK, etmidr2);
+ caps->vmid_size = FIELD_GET(TRCIDR2_VMIDSIZE_MASK, etmidr2);
/* CCSIZE, bits[28:25] size of the cycle counter in bits minus 12 */
- drvdata->ccsize = FIELD_GET(TRCIDR2_CCSIZE_MASK, etmidr2);
+ caps->ccsize = FIELD_GET(TRCIDR2_CCSIZE_MASK, etmidr2);
etmidr3 = etm4x_relaxed_read32(csa, TRCIDR3);
/* CCITMIN, bits[11:0] minimum threshold value that can be programmed */
- drvdata->ccitmin = FIELD_GET(TRCIDR3_CCITMIN_MASK, etmidr3);
- etm4_fixup_wrong_ccitmin(drvdata);
+ caps->ccitmin = FIELD_GET(TRCIDR3_CCITMIN_MASK, etmidr3);
+ etm4_fixup_wrong_ccitmin(caps);
/* EXLEVEL_S, bits[19:16] Secure state instruction tracing */
- drvdata->s_ex_level = FIELD_GET(TRCIDR3_EXLEVEL_S_MASK, etmidr3);
- drvdata->config.s_ex_level = drvdata->s_ex_level;
+ caps->s_ex_level = FIELD_GET(TRCIDR3_EXLEVEL_S_MASK, etmidr3);
+ drvdata->config.s_ex_level = caps->s_ex_level;
/* EXLEVEL_NS, bits[23:20] Non-secure state instruction tracing */
- drvdata->ns_ex_level = FIELD_GET(TRCIDR3_EXLEVEL_NS_MASK, etmidr3);
+ caps->ns_ex_level = FIELD_GET(TRCIDR3_EXLEVEL_NS_MASK, etmidr3);
/*
* TRCERR, bit[24] whether a trace unit can trace a
* system error exception.
*/
- drvdata->trc_error = !!(etmidr3 & TRCIDR3_TRCERR);
+ caps->trc_error = !!(etmidr3 & TRCIDR3_TRCERR);
/* SYNCPR, bit[25] implementation has a fixed synchronization period? */
- drvdata->syncpr = !!(etmidr3 & TRCIDR3_SYNCPR);
+ caps->syncpr = !!(etmidr3 & TRCIDR3_SYNCPR);
/* STALLCTL, bit[26] is stall control implemented? */
- drvdata->stallctl = !!(etmidr3 & TRCIDR3_STALLCTL);
+ caps->stallctl = !!(etmidr3 & TRCIDR3_STALLCTL);
/* SYSSTALL, bit[27] implementation can support stall control? */
- drvdata->sysstall = !!(etmidr3 & TRCIDR3_SYSSTALL);
+ caps->sysstall = !!(etmidr3 & TRCIDR3_SYSSTALL);
/*
* NUMPROC - the number of PEs available for tracing, 5bits
* = TRCIDR3.bits[13:12]bits[30:28]
* bits[4:3] = TRCIDR3.bits[13:12] (since etm-v4.2, otherwise RES0)
* bits[3:0] = TRCIDR3.bits[30:28]
*/
- drvdata->nr_pe = (FIELD_GET(TRCIDR3_NUMPROC_HI_MASK, etmidr3) << 3) |
- FIELD_GET(TRCIDR3_NUMPROC_LO_MASK, etmidr3);
+ caps->nr_pe = (FIELD_GET(TRCIDR3_NUMPROC_HI_MASK, etmidr3) << 3) |
+ FIELD_GET(TRCIDR3_NUMPROC_LO_MASK, etmidr3);
/* NOOVERFLOW, bit[31] is trace overflow prevention supported */
- drvdata->nooverflow = !!(etmidr3 & TRCIDR3_NOOVERFLOW);
+ caps->nooverflow = !!(etmidr3 & TRCIDR3_NOOVERFLOW);
/* number of resources trace unit supports */
etmidr4 = etm4x_relaxed_read32(csa, TRCIDR4);
/* NUMACPAIRS, bits[0:3] number of addr comparator pairs for tracing */
- drvdata->nr_addr_cmp = FIELD_GET(TRCIDR4_NUMACPAIRS_MASK, etmidr4);
+ caps->nr_addr_cmp = FIELD_GET(TRCIDR4_NUMACPAIRS_MASK, etmidr4);
/* NUMPC, bits[15:12] number of PE comparator inputs for tracing */
- drvdata->nr_pe_cmp = FIELD_GET(TRCIDR4_NUMPC_MASK, etmidr4);
+ caps->nr_pe_cmp = FIELD_GET(TRCIDR4_NUMPC_MASK, etmidr4);
/*
* NUMRSPAIR, bits[19:16]
* The number of resource pairs conveyed by the HW starts at 0, i.e a
@@ -1481,41 +1491,41 @@ static void etm4_init_arch_data(void *info)
* the default TRUE and FALSE resource selectors are omitted.
* Otherwise for values 0x1 and above the number is N + 1 as per v4.2.
*/
- drvdata->nr_resource = FIELD_GET(TRCIDR4_NUMRSPAIR_MASK, etmidr4);
- if ((drvdata->arch < ETM_ARCH_V4_3) || (drvdata->nr_resource > 0))
- drvdata->nr_resource += 1;
+ caps->nr_resource = FIELD_GET(TRCIDR4_NUMRSPAIR_MASK, etmidr4);
+ if ((drvdata->arch < ETM_ARCH_V4_3) || (caps->nr_resource > 0))
+ caps->nr_resource += 1;
/*
* NUMSSCC, bits[23:20] the number of single-shot
* comparator control for tracing. Read any status regs as these
* also contain RO capability data.
*/
- drvdata->nr_ss_cmp = FIELD_GET(TRCIDR4_NUMSSCC_MASK, etmidr4);
- for (i = 0; i < drvdata->nr_ss_cmp; i++) {
+ caps->nr_ss_cmp = FIELD_GET(TRCIDR4_NUMSSCC_MASK, etmidr4);
+ for (i = 0; i < caps->nr_ss_cmp; i++) {
drvdata->config.ss_status[i] =
etm4x_relaxed_read32(csa, TRCSSCSRn(i));
}
/* NUMCIDC, bits[27:24] number of Context ID comparators for tracing */
- drvdata->numcidc = FIELD_GET(TRCIDR4_NUMCIDC_MASK, etmidr4);
+ caps->numcidc = FIELD_GET(TRCIDR4_NUMCIDC_MASK, etmidr4);
/* NUMVMIDC, bits[31:28] number of VMID comparators for tracing */
- drvdata->numvmidc = FIELD_GET(TRCIDR4_NUMVMIDC_MASK, etmidr4);
+ caps->numvmidc = FIELD_GET(TRCIDR4_NUMVMIDC_MASK, etmidr4);
etmidr5 = etm4x_relaxed_read32(csa, TRCIDR5);
/* NUMEXTIN, bits[8:0] number of external inputs implemented */
- drvdata->nr_ext_inp = FIELD_GET(TRCIDR5_NUMEXTIN_MASK, etmidr5);
- drvdata->numextinsel = FIELD_GET(TRCIDR5_NUMEXTINSEL_MASK, etmidr5);
+ caps->nr_ext_inp = FIELD_GET(TRCIDR5_NUMEXTIN_MASK, etmidr5);
+ caps->numextinsel = FIELD_GET(TRCIDR5_NUMEXTINSEL_MASK, etmidr5);
/* TRACEIDSIZE, bits[21:16] indicates the trace ID width */
- drvdata->trcid_size = FIELD_GET(TRCIDR5_TRACEIDSIZE_MASK, etmidr5);
+ caps->trcid_size = FIELD_GET(TRCIDR5_TRACEIDSIZE_MASK, etmidr5);
/* ATBTRIG, bit[22] implementation can support ATB triggers? */
- drvdata->atbtrig = !!(etmidr5 & TRCIDR5_ATBTRIG);
+ caps->atbtrig = !!(etmidr5 & TRCIDR5_ATBTRIG);
/*
* LPOVERRIDE, bit[23] implementation supports
* low-power state override
*/
- drvdata->lpoverride = (etmidr5 & TRCIDR5_LPOVERRIDE) && (!drvdata->skip_power_up);
+ caps->lpoverride = (etmidr5 & TRCIDR5_LPOVERRIDE) && (!caps->skip_power_up);
/* NUMSEQSTATE, bits[27:25] number of sequencer states implemented */
- drvdata->nrseqstate = FIELD_GET(TRCIDR5_NUMSEQSTATE_MASK, etmidr5);
+ caps->nrseqstate = FIELD_GET(TRCIDR5_NUMSEQSTATE_MASK, etmidr5);
/* NUMCNTR, bits[30:28] number of counters available for tracing */
- drvdata->nr_cntr = FIELD_GET(TRCIDR5_NUMCNTR_MASK, etmidr5);
+ caps->nr_cntr = FIELD_GET(TRCIDR5_NUMCNTR_MASK, etmidr5);
coresight_clear_self_claim_tag_unlocked(csa);
etm4_cs_lock(drvdata, csa);
@@ -1691,7 +1701,7 @@ static int etm4_get_next_comparator(struct etmv4_drvdata *drvdata, u32 type)
* nr_addr_cmp holds the number of comparator _pair_, so time 2
* for the total number of comparators.
*/
- nr_comparator = drvdata->nr_addr_cmp * 2;
+ nr_comparator = drvdata->caps.nr_addr_cmp * 2;
/* Go through the tally of comparators looking for a free one. */
while (index < nr_comparator) {
@@ -1869,6 +1879,7 @@ static int etm4_dying_cpu(unsigned int cpu)
static int __etm4_cpu_save(struct etmv4_drvdata *drvdata)
{
int i, ret = 0;
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_save_state *state;
struct coresight_device *csdev = drvdata->csdev;
struct csdev_access *csa;
@@ -1905,57 +1916,57 @@ static int __etm4_cpu_save(struct etmv4_drvdata *drvdata)
state = drvdata->save_state;
- if (drvdata->nr_pe)
+ if (caps->nr_pe)
state->trcprocselr = etm4x_read32(csa, TRCPROCSELR);
state->trcconfigr = etm4x_read32(csa, TRCCONFIGR);
state->trcauxctlr = etm4x_read32(csa, TRCAUXCTLR);
state->trceventctl0r = etm4x_read32(csa, TRCEVENTCTL0R);
state->trceventctl1r = etm4x_read32(csa, TRCEVENTCTL1R);
- if (drvdata->stallctl)
+ if (caps->stallctl)
state->trcstallctlr = etm4x_read32(csa, TRCSTALLCTLR);
state->trctsctlr = etm4x_read32(csa, TRCTSCTLR);
state->trcsyncpr = etm4x_read32(csa, TRCSYNCPR);
state->trcccctlr = etm4x_read32(csa, TRCCCCTLR);
state->trcbbctlr = etm4x_read32(csa, TRCBBCTLR);
state->trctraceidr = etm4x_read32(csa, TRCTRACEIDR);
- if (drvdata->q_filt)
+ if (caps->q_filt)
state->trcqctlr = etm4x_read32(csa, TRCQCTLR);
state->trcvictlr = etm4x_read32(csa, TRCVICTLR);
state->trcviiectlr = etm4x_read32(csa, TRCVIIECTLR);
state->trcvissctlr = etm4x_read32(csa, TRCVISSCTLR);
- if (drvdata->nr_pe_cmp)
+ if (caps->nr_pe_cmp)
state->trcvipcssctlr = etm4x_read32(csa, TRCVIPCSSCTLR);
- for (i = 0; i < drvdata->nrseqstate - 1; i++)
+ for (i = 0; i < caps->nrseqstate - 1; i++)
state->trcseqevr[i] = etm4x_read32(csa, TRCSEQEVRn(i));
- if (drvdata->nrseqstate) {
+ if (caps->nrseqstate) {
state->trcseqrstevr = etm4x_read32(csa, TRCSEQRSTEVR);
state->trcseqstr = etm4x_read32(csa, TRCSEQSTR);
}
- if (drvdata->numextinsel)
+ if (caps->numextinsel)
state->trcextinselr = etm4x_read32(csa, TRCEXTINSELR);
- for (i = 0; i < drvdata->nr_cntr; i++) {
+ for (i = 0; i < caps->nr_cntr; i++) {
state->trccntrldvr[i] = etm4x_read32(csa, TRCCNTRLDVRn(i));
state->trccntctlr[i] = etm4x_read32(csa, TRCCNTCTLRn(i));
state->trccntvr[i] = etm4x_read32(csa, TRCCNTVRn(i));
}
/* Resource selector pair 0 is reserved */
- for (i = 2; i < drvdata->nr_resource * 2; i++)
+ for (i = 2; i < caps->nr_resource * 2; i++)
state->trcrsctlr[i] = etm4x_read32(csa, TRCRSCTLRn(i));
- for (i = 0; i < drvdata->nr_ss_cmp; i++) {
+ for (i = 0; i < caps->nr_ss_cmp; i++) {
state->trcssccr[i] = etm4x_read32(csa, TRCSSCCRn(i));
state->trcsscsr[i] = etm4x_read32(csa, TRCSSCSRn(i));
if (etm4x_sspcicrn_present(drvdata, i))
state->trcsspcicr[i] = etm4x_read32(csa, TRCSSPCICRn(i));
}
- for (i = 0; i < drvdata->nr_addr_cmp * 2; i++) {
+ for (i = 0; i < caps->nr_addr_cmp * 2; i++) {
state->trcacvr[i] = etm4x_read64(csa, TRCACVRn(i));
state->trcacatr[i] = etm4x_read64(csa, TRCACATRn(i));
}
@@ -1967,23 +1978,23 @@ static int __etm4_cpu_save(struct etmv4_drvdata *drvdata)
* unit") of ARM IHI 0064D.
*/
- for (i = 0; i < drvdata->numcidc; i++)
+ for (i = 0; i < caps->numcidc; i++)
state->trccidcvr[i] = etm4x_read64(csa, TRCCIDCVRn(i));
- for (i = 0; i < drvdata->numvmidc; i++)
+ for (i = 0; i < caps->numvmidc; i++)
state->trcvmidcvr[i] = etm4x_read64(csa, TRCVMIDCVRn(i));
state->trccidcctlr0 = etm4x_read32(csa, TRCCIDCCTLR0);
- if (drvdata->numcidc > 4)
+ if (caps->numcidc > 4)
state->trccidcctlr1 = etm4x_read32(csa, TRCCIDCCTLR1);
state->trcvmidcctlr0 = etm4x_read32(csa, TRCVMIDCCTLR0);
- if (drvdata->numvmidc > 4)
+ if (caps->numvmidc > 4)
state->trcvmidcctlr0 = etm4x_read32(csa, TRCVMIDCCTLR1);
state->trcclaimset = etm4x_read32(csa, TRCCLAIMCLR);
- if (!drvdata->skip_power_up)
+ if (!caps->skip_power_up)
state->trcpdcr = etm4x_read32(csa, TRCPDCR);
/* wait for TRCSTATR.IDLE to go up */
@@ -2000,7 +2011,7 @@ static int __etm4_cpu_save(struct etmv4_drvdata *drvdata)
* potentially save power on systems that respect the TRCPDCR_PU
* despite requesting software to save/restore state.
*/
- if (!drvdata->skip_power_up)
+ if (!caps->skip_power_up)
etm4x_relaxed_write32(csa, (state->trcpdcr & ~TRCPDCR_PU),
TRCPDCR);
out:
@@ -2027,6 +2038,7 @@ static int etm4_cpu_save(struct etmv4_drvdata *drvdata)
static void __etm4_cpu_restore(struct etmv4_drvdata *drvdata)
{
int i;
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_save_state *state = drvdata->save_state;
struct csdev_access *csa = &drvdata->csdev->access;
@@ -2036,77 +2048,77 @@ static void __etm4_cpu_restore(struct etmv4_drvdata *drvdata)
etm4_cs_unlock(drvdata, csa);
etm4x_relaxed_write32(csa, state->trcclaimset, TRCCLAIMSET);
- if (drvdata->nr_pe)
+ if (caps->nr_pe)
etm4x_relaxed_write32(csa, state->trcprocselr, TRCPROCSELR);
etm4x_relaxed_write32(csa, state->trcconfigr, TRCCONFIGR);
etm4x_relaxed_write32(csa, state->trcauxctlr, TRCAUXCTLR);
etm4x_relaxed_write32(csa, state->trceventctl0r, TRCEVENTCTL0R);
etm4x_relaxed_write32(csa, state->trceventctl1r, TRCEVENTCTL1R);
- if (drvdata->stallctl)
+ if (caps->stallctl)
etm4x_relaxed_write32(csa, state->trcstallctlr, TRCSTALLCTLR);
etm4x_relaxed_write32(csa, state->trctsctlr, TRCTSCTLR);
etm4x_relaxed_write32(csa, state->trcsyncpr, TRCSYNCPR);
etm4x_relaxed_write32(csa, state->trcccctlr, TRCCCCTLR);
etm4x_relaxed_write32(csa, state->trcbbctlr, TRCBBCTLR);
etm4x_relaxed_write32(csa, state->trctraceidr, TRCTRACEIDR);
- if (drvdata->q_filt)
+ if (caps->q_filt)
etm4x_relaxed_write32(csa, state->trcqctlr, TRCQCTLR);
etm4x_relaxed_write32(csa, state->trcvictlr, TRCVICTLR);
etm4x_relaxed_write32(csa, state->trcviiectlr, TRCVIIECTLR);
etm4x_relaxed_write32(csa, state->trcvissctlr, TRCVISSCTLR);
- if (drvdata->nr_pe_cmp)
+ if (caps->nr_pe_cmp)
etm4x_relaxed_write32(csa, state->trcvipcssctlr, TRCVIPCSSCTLR);
- for (i = 0; i < drvdata->nrseqstate - 1; i++)
+ for (i = 0; i < caps->nrseqstate - 1; i++)
etm4x_relaxed_write32(csa, state->trcseqevr[i], TRCSEQEVRn(i));
- if (drvdata->nrseqstate) {
+ if (caps->nrseqstate) {
etm4x_relaxed_write32(csa, state->trcseqrstevr, TRCSEQRSTEVR);
etm4x_relaxed_write32(csa, state->trcseqstr, TRCSEQSTR);
}
- if (drvdata->numextinsel)
+ if (caps->numextinsel)
etm4x_relaxed_write32(csa, state->trcextinselr, TRCEXTINSELR);
- for (i = 0; i < drvdata->nr_cntr; i++) {
+ for (i = 0; i < caps->nr_cntr; i++) {
etm4x_relaxed_write32(csa, state->trccntrldvr[i], TRCCNTRLDVRn(i));
etm4x_relaxed_write32(csa, state->trccntctlr[i], TRCCNTCTLRn(i));
etm4x_relaxed_write32(csa, state->trccntvr[i], TRCCNTVRn(i));
}
/* Resource selector pair 0 is reserved */
- for (i = 2; i < drvdata->nr_resource * 2; i++)
+ for (i = 2; i < caps->nr_resource * 2; i++)
etm4x_relaxed_write32(csa, state->trcrsctlr[i], TRCRSCTLRn(i));
- for (i = 0; i < drvdata->nr_ss_cmp; i++) {
+ for (i = 0; i < caps->nr_ss_cmp; i++) {
etm4x_relaxed_write32(csa, state->trcssccr[i], TRCSSCCRn(i));
etm4x_relaxed_write32(csa, state->trcsscsr[i], TRCSSCSRn(i));
if (etm4x_sspcicrn_present(drvdata, i))
etm4x_relaxed_write32(csa, state->trcsspcicr[i], TRCSSPCICRn(i));
}
- for (i = 0; i < drvdata->nr_addr_cmp * 2; i++) {
+ for (i = 0; i < caps->nr_addr_cmp * 2; i++) {
etm4x_relaxed_write64(csa, state->trcacvr[i], TRCACVRn(i));
etm4x_relaxed_write64(csa, state->trcacatr[i], TRCACATRn(i));
}
- for (i = 0; i < drvdata->numcidc; i++)
+ for (i = 0; i < caps->numcidc; i++)
etm4x_relaxed_write64(csa, state->trccidcvr[i], TRCCIDCVRn(i));
- for (i = 0; i < drvdata->numvmidc; i++)
+ for (i = 0; i < caps->numvmidc; i++)
etm4x_relaxed_write64(csa, state->trcvmidcvr[i], TRCVMIDCVRn(i));
etm4x_relaxed_write32(csa, state->trccidcctlr0, TRCCIDCCTLR0);
- if (drvdata->numcidc > 4)
+ if (caps->numcidc > 4)
etm4x_relaxed_write32(csa, state->trccidcctlr1, TRCCIDCCTLR1);
etm4x_relaxed_write32(csa, state->trcvmidcctlr0, TRCVMIDCCTLR0);
- if (drvdata->numvmidc > 4)
+ if (caps->numvmidc > 4)
etm4x_relaxed_write32(csa, state->trcvmidcctlr0, TRCVMIDCCTLR1);
etm4x_relaxed_write32(csa, state->trcclaimset, TRCCLAIMSET);
- if (!drvdata->skip_power_up)
+ if (!caps->skip_power_up)
etm4x_relaxed_write32(csa, state->trcpdcr, TRCPDCR);
/*
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
index e9eeea6240d5..3d5f343130bd 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
@@ -62,8 +62,9 @@ static ssize_t nr_pe_cmp_show(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
- val = drvdata->nr_pe_cmp;
+ val = caps->nr_pe_cmp;
return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
}
static DEVICE_ATTR_RO(nr_pe_cmp);
@@ -74,8 +75,9 @@ static ssize_t nr_addr_cmp_show(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
- val = drvdata->nr_addr_cmp;
+ val = caps->nr_addr_cmp;
return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
}
static DEVICE_ATTR_RO(nr_addr_cmp);
@@ -86,8 +88,9 @@ static ssize_t nr_cntr_show(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
- val = drvdata->nr_cntr;
+ val = caps->nr_cntr;
return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
}
static DEVICE_ATTR_RO(nr_cntr);
@@ -98,8 +101,9 @@ static ssize_t nr_ext_inp_show(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
- val = drvdata->nr_ext_inp;
+ val = caps->nr_ext_inp;
return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
}
static DEVICE_ATTR_RO(nr_ext_inp);
@@ -110,8 +114,9 @@ static ssize_t numcidc_show(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
- val = drvdata->numcidc;
+ val = caps->numcidc;
return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
}
static DEVICE_ATTR_RO(numcidc);
@@ -122,8 +127,9 @@ static ssize_t numvmidc_show(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
- val = drvdata->numvmidc;
+ val = caps->numvmidc;
return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
}
static DEVICE_ATTR_RO(numvmidc);
@@ -134,8 +140,9 @@ static ssize_t nrseqstate_show(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
- val = drvdata->nrseqstate;
+ val = caps->nrseqstate;
return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
}
static DEVICE_ATTR_RO(nrseqstate);
@@ -146,8 +153,9 @@ static ssize_t nr_resource_show(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
- val = drvdata->nr_resource;
+ val = caps->nr_resource;
return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
}
static DEVICE_ATTR_RO(nr_resource);
@@ -158,8 +166,9 @@ static ssize_t nr_ss_cmp_show(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
- val = drvdata->nr_ss_cmp;
+ val = caps->nr_ss_cmp;
return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
}
static DEVICE_ATTR_RO(nr_ss_cmp);
@@ -171,6 +180,7 @@ static ssize_t reset_store(struct device *dev,
int i;
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
@@ -200,7 +210,7 @@ static ssize_t reset_store(struct device *dev,
config->stall_ctrl = 0x0;
/* Reset trace synchronization period to 2^8 = 256 bytes*/
- if (drvdata->syncpr == false)
+ if (caps->syncpr == false)
config->syncfreq = 0x8;
/*
@@ -209,7 +219,7 @@ static ssize_t reset_store(struct device *dev,
* each trace run.
*/
config->vinst_ctrl = FIELD_PREP(TRCVICTLR_EVENT_MASK, 0x01);
- if (drvdata->nr_addr_cmp > 0) {
+ if (caps->nr_addr_cmp > 0) {
config->mode |= ETM_MODE_VIEWINST_STARTSTOP;
/* SSSTATUS, bit[9] */
config->vinst_ctrl |= TRCVICTLR_SSSTATUS;
@@ -223,7 +233,7 @@ static ssize_t reset_store(struct device *dev,
config->vipcssctlr = 0x0;
/* Disable seq events */
- for (i = 0; i < drvdata->nrseqstate-1; i++)
+ for (i = 0; i < caps->nrseqstate-1; i++)
config->seq_ctrl[i] = 0x0;
config->seq_rst = 0x0;
config->seq_state = 0x0;
@@ -232,38 +242,38 @@ static ssize_t reset_store(struct device *dev,
config->ext_inp = 0x0;
config->cntr_idx = 0x0;
- for (i = 0; i < drvdata->nr_cntr; i++) {
+ for (i = 0; i < caps->nr_cntr; i++) {
config->cntrldvr[i] = 0x0;
config->cntr_ctrl[i] = 0x0;
config->cntr_val[i] = 0x0;
}
config->res_idx = 0x0;
- for (i = 2; i < 2 * drvdata->nr_resource; i++)
+ for (i = 2; i < 2 * caps->nr_resource; i++)
config->res_ctrl[i] = 0x0;
config->ss_idx = 0x0;
- for (i = 0; i < drvdata->nr_ss_cmp; i++) {
+ for (i = 0; i < caps->nr_ss_cmp; i++) {
config->ss_ctrl[i] = 0x0;
config->ss_pe_cmp[i] = 0x0;
}
config->addr_idx = 0x0;
- for (i = 0; i < drvdata->nr_addr_cmp * 2; i++) {
+ for (i = 0; i < caps->nr_addr_cmp * 2; i++) {
config->addr_val[i] = 0x0;
config->addr_acc[i] = 0x0;
config->addr_type[i] = ETM_ADDR_TYPE_NONE;
}
config->ctxid_idx = 0x0;
- for (i = 0; i < drvdata->numcidc; i++)
+ for (i = 0; i < caps->numcidc; i++)
config->ctxid_pid[i] = 0x0;
config->ctxid_mask0 = 0x0;
config->ctxid_mask1 = 0x0;
config->vmid_idx = 0x0;
- for (i = 0; i < drvdata->numvmidc; i++)
+ for (i = 0; i < caps->numvmidc; i++)
config->vmid_val[i] = 0x0;
config->vmid_mask0 = 0x0;
config->vmid_mask1 = 0x0;
@@ -297,6 +307,7 @@ static ssize_t mode_store(struct device *dev,
{
unsigned long val, mode;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
@@ -305,7 +316,7 @@ static ssize_t mode_store(struct device *dev,
raw_spin_lock(&drvdata->spinlock);
config->mode = val & ETMv4_MODE_ALL;
- if (drvdata->instrp0 == true) {
+ if (caps->instrp0 == true) {
/* start by clearing instruction P0 field */
config->cfg &= ~TRCCONFIGR_INSTP0_LOAD_STORE;
if (config->mode & ETM_MODE_LOAD)
@@ -323,45 +334,45 @@ static ssize_t mode_store(struct device *dev,
}
/* bit[3], Branch broadcast mode */
- if ((config->mode & ETM_MODE_BB) && (drvdata->trcbb == true))
+ if ((config->mode & ETM_MODE_BB) && (caps->trcbb == true))
config->cfg |= TRCCONFIGR_BB;
else
config->cfg &= ~TRCCONFIGR_BB;
/* bit[4], Cycle counting instruction trace bit */
if ((config->mode & ETMv4_MODE_CYCACC) &&
- (drvdata->trccci == true))
+ (caps->trccci == true))
config->cfg |= TRCCONFIGR_CCI;
else
config->cfg &= ~TRCCONFIGR_CCI;
/* bit[6], Context ID tracing bit */
- if ((config->mode & ETMv4_MODE_CTXID) && (drvdata->ctxid_size))
+ if ((config->mode & ETMv4_MODE_CTXID) && (caps->ctxid_size))
config->cfg |= TRCCONFIGR_CID;
else
config->cfg &= ~TRCCONFIGR_CID;
- if ((config->mode & ETM_MODE_VMID) && (drvdata->vmid_size))
+ if ((config->mode & ETM_MODE_VMID) && (caps->vmid_size))
config->cfg |= TRCCONFIGR_VMID;
else
config->cfg &= ~TRCCONFIGR_VMID;
/* bits[10:8], Conditional instruction tracing bit */
mode = ETM_MODE_COND(config->mode);
- if (drvdata->trccond == true) {
+ if (caps->trccond == true) {
config->cfg &= ~TRCCONFIGR_COND_MASK;
config->cfg |= mode << __bf_shf(TRCCONFIGR_COND_MASK);
}
/* bit[11], Global timestamp tracing bit */
- if ((config->mode & ETMv4_MODE_TIMESTAMP) && (drvdata->ts_size))
+ if ((config->mode & ETMv4_MODE_TIMESTAMP) && (caps->ts_size))
config->cfg |= TRCCONFIGR_TS;
else
config->cfg &= ~TRCCONFIGR_TS;
/* bit[12], Return stack enable bit */
if ((config->mode & ETM_MODE_RETURNSTACK) &&
- (drvdata->retstack == true))
+ (caps->retstack == true))
config->cfg |= TRCCONFIGR_RS;
else
config->cfg &= ~TRCCONFIGR_RS;
@@ -375,31 +386,31 @@ static ssize_t mode_store(struct device *dev,
* Always set the low bit for any requested mode. Valid combos are
* 0b00, 0b01 and 0b11.
*/
- if (mode && drvdata->q_support)
+ if (mode && caps->q_support)
config->cfg |= TRCCONFIGR_QE_W_COUNTS;
/*
* if supported, Q elements with and without instruction
* counts are enabled
*/
- if ((mode & BIT(1)) && (drvdata->q_support & BIT(1)))
+ if ((mode & BIT(1)) && (caps->q_support & BIT(1)))
config->cfg |= TRCCONFIGR_QE_WO_COUNTS;
/* bit[11], AMBA Trace Bus (ATB) trigger enable bit */
if ((config->mode & ETM_MODE_ATB_TRIGGER) &&
- (drvdata->atbtrig == true))
+ (caps->atbtrig == true))
config->eventctrl1 |= TRCEVENTCTL1R_ATB;
else
config->eventctrl1 &= ~TRCEVENTCTL1R_ATB;
/* bit[12], Low-power state behavior override bit */
if ((config->mode & ETM_MODE_LPOVERRIDE) &&
- (drvdata->lpoverride == true))
+ (caps->lpoverride == true))
config->eventctrl1 |= TRCEVENTCTL1R_LPOVERRIDE;
else
config->eventctrl1 &= ~TRCEVENTCTL1R_LPOVERRIDE;
/* bit[8], Instruction stall bit */
- if ((config->mode & ETM_MODE_ISTALL_EN) && (drvdata->stallctl == true))
+ if ((config->mode & ETM_MODE_ISTALL_EN) && (caps->stallctl == true))
config->stall_ctrl |= TRCSTALLCTLR_ISTALL;
else
config->stall_ctrl &= ~TRCSTALLCTLR_ISTALL;
@@ -412,7 +423,7 @@ static ssize_t mode_store(struct device *dev,
/* bit[13], Trace overflow prevention bit */
if ((config->mode & ETM_MODE_NOOVERFLOW) &&
- (drvdata->nooverflow == true))
+ (caps->nooverflow == true))
config->stall_ctrl |= TRCSTALLCTLR_NOOVERFLOW;
else
config->stall_ctrl &= ~TRCSTALLCTLR_NOOVERFLOW;
@@ -431,7 +442,7 @@ static ssize_t mode_store(struct device *dev,
/* bit[11], Whether a trace unit must trace a system error exception */
if ((config->mode & ETM_MODE_TRACE_ERR) &&
- (drvdata->trc_error == true))
+ (caps->trc_error == true))
config->vinst_ctrl |= TRCVICTLR_TRCERR;
else
config->vinst_ctrl &= ~TRCVICTLR_TRCERR;
@@ -463,13 +474,14 @@ static ssize_t pe_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
raw_spin_lock(&drvdata->spinlock);
- if (val > drvdata->nr_pe) {
+ if (val > caps->nr_pe) {
raw_spin_unlock(&drvdata->spinlock);
return -EINVAL;
}
@@ -498,13 +510,14 @@ static ssize_t event_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
raw_spin_lock(&drvdata->spinlock);
- switch (drvdata->nr_event) {
+ switch (caps->nr_event) {
case 0x0:
/* EVENT0, bits[7:0] */
config->eventctrl0 = val & 0xFF;
@@ -547,6 +560,7 @@ static ssize_t event_instren_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
@@ -555,7 +569,7 @@ static ssize_t event_instren_store(struct device *dev,
raw_spin_lock(&drvdata->spinlock);
/* start by clearing all instruction event enable bits */
config->eventctrl1 &= ~TRCEVENTCTL1R_INSTEN_MASK;
- switch (drvdata->nr_event) {
+ switch (caps->nr_event) {
case 0x0:
/* generate Event element for event 1 */
config->eventctrl1 |= val & TRCEVENTCTL1R_INSTEN_1;
@@ -603,11 +617,12 @@ static ssize_t event_ts_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
- if (!drvdata->ts_size)
+ if (!caps->ts_size)
return -EINVAL;
config->ts_ctrl = val & ETMv4_EVENT_MASK;
@@ -633,11 +648,12 @@ static ssize_t syncfreq_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
- if (drvdata->syncpr == true)
+ if (caps->syncpr == true)
return -EINVAL;
config->syncfreq = val & ETMv4_SYNC_MASK;
@@ -663,6 +679,7 @@ static ssize_t cyc_threshold_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
@@ -670,7 +687,7 @@ static ssize_t cyc_threshold_store(struct device *dev,
/* mask off max threshold before checking min value */
val &= ETM_CYC_THRESHOLD_MASK;
- if (val < drvdata->ccitmin)
+ if (val < caps->ccitmin)
return -EINVAL;
config->ccctlr = val;
@@ -696,13 +713,14 @@ static ssize_t bb_ctrl_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
- if (drvdata->trcbb == false)
+ if (caps->trcbb == false)
return -EINVAL;
- if (!drvdata->nr_addr_cmp)
+ if (!caps->nr_addr_cmp)
return -EINVAL;
/*
@@ -768,6 +786,7 @@ static ssize_t s_exlevel_vinst_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
@@ -777,7 +796,7 @@ static ssize_t s_exlevel_vinst_store(struct device *dev,
/* clear all EXLEVEL_S bits */
config->vinst_ctrl &= ~TRCVICTLR_EXLEVEL_S_MASK;
/* enable instruction tracing for corresponding exception level */
- val &= drvdata->s_ex_level;
+ val &= caps->s_ex_level;
config->vinst_ctrl |= val << __bf_shf(TRCVICTLR_EXLEVEL_S_MASK);
raw_spin_unlock(&drvdata->spinlock);
return size;
@@ -803,6 +822,7 @@ static ssize_t ns_exlevel_vinst_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
@@ -812,7 +832,7 @@ static ssize_t ns_exlevel_vinst_store(struct device *dev,
/* clear EXLEVEL_NS bits */
config->vinst_ctrl &= ~TRCVICTLR_EXLEVEL_NS_MASK;
/* enable instruction tracing for corresponding exception level */
- val &= drvdata->ns_ex_level;
+ val &= caps->ns_ex_level;
config->vinst_ctrl |= val << __bf_shf(TRCVICTLR_EXLEVEL_NS_MASK);
raw_spin_unlock(&drvdata->spinlock);
return size;
@@ -837,11 +857,12 @@ static ssize_t addr_idx_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
- if (val >= drvdata->nr_addr_cmp * 2)
+ if (val >= caps->nr_addr_cmp * 2)
return -EINVAL;
/*
@@ -1060,6 +1081,7 @@ static ssize_t addr_start_store(struct device *dev,
u8 idx;
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
@@ -1067,7 +1089,7 @@ static ssize_t addr_start_store(struct device *dev,
raw_spin_lock(&drvdata->spinlock);
idx = config->addr_idx;
- if (!drvdata->nr_addr_cmp) {
+ if (!caps->nr_addr_cmp) {
raw_spin_unlock(&drvdata->spinlock);
return -EINVAL;
}
@@ -1115,6 +1137,7 @@ static ssize_t addr_stop_store(struct device *dev,
u8 idx;
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
@@ -1122,7 +1145,7 @@ static ssize_t addr_stop_store(struct device *dev,
raw_spin_lock(&drvdata->spinlock);
idx = config->addr_idx;
- if (!drvdata->nr_addr_cmp) {
+ if (!caps->nr_addr_cmp) {
raw_spin_unlock(&drvdata->spinlock);
return -EINVAL;
}
@@ -1167,6 +1190,7 @@ static ssize_t addr_ctxtype_store(struct device *dev,
u8 idx;
char str[10] = "";
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (strlen(buf) >= 10)
@@ -1181,13 +1205,13 @@ static ssize_t addr_ctxtype_store(struct device *dev,
config->addr_acc[idx] &= ~TRCACATRn_CONTEXTTYPE_MASK;
else if (!strcmp(str, "ctxid")) {
/* 0b01 The trace unit performs a Context ID */
- if (drvdata->numcidc) {
+ if (caps->numcidc) {
config->addr_acc[idx] |= TRCACATRn_CONTEXTTYPE_CTXID;
config->addr_acc[idx] &= ~TRCACATRn_CONTEXTTYPE_VMID;
}
} else if (!strcmp(str, "vmid")) {
/* 0b10 The trace unit performs a VMID */
- if (drvdata->numvmidc) {
+ if (caps->numvmidc) {
config->addr_acc[idx] &= ~TRCACATRn_CONTEXTTYPE_CTXID;
config->addr_acc[idx] |= TRCACATRn_CONTEXTTYPE_VMID;
}
@@ -1196,9 +1220,9 @@ static ssize_t addr_ctxtype_store(struct device *dev,
* 0b11 The trace unit performs a Context ID
* comparison and a VMID
*/
- if (drvdata->numcidc)
+ if (caps->numcidc)
config->addr_acc[idx] |= TRCACATRn_CONTEXTTYPE_CTXID;
- if (drvdata->numvmidc)
+ if (caps->numvmidc)
config->addr_acc[idx] |= TRCACATRn_CONTEXTTYPE_VMID;
}
raw_spin_unlock(&drvdata->spinlock);
@@ -1230,14 +1254,15 @@ static ssize_t addr_context_store(struct device *dev,
u8 idx;
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
- if ((drvdata->numcidc <= 1) && (drvdata->numvmidc <= 1))
+ if ((caps->numcidc <= 1) && (caps->numvmidc <= 1))
return -EINVAL;
- if (val >= (drvdata->numcidc >= drvdata->numvmidc ?
- drvdata->numcidc : drvdata->numvmidc))
+ if (val >= (caps->numcidc >= caps->numvmidc ?
+ caps->numcidc : caps->numvmidc))
return -EINVAL;
raw_spin_lock(&drvdata->spinlock);
@@ -1348,9 +1373,10 @@ static ssize_t vinst_pe_cmp_start_stop_show(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
- if (!drvdata->nr_pe_cmp)
+ if (!caps->nr_pe_cmp)
return -EINVAL;
val = config->vipcssctlr;
return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
@@ -1361,11 +1387,12 @@ static ssize_t vinst_pe_cmp_start_stop_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
- if (!drvdata->nr_pe_cmp)
+ if (!caps->nr_pe_cmp)
return -EINVAL;
raw_spin_lock(&drvdata->spinlock);
@@ -1393,11 +1420,12 @@ static ssize_t seq_idx_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
- if (val >= drvdata->nrseqstate - 1)
+ if (val >= caps->nrseqstate - 1)
return -EINVAL;
/*
@@ -1429,11 +1457,12 @@ static ssize_t seq_state_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
- if (val >= drvdata->nrseqstate)
+ if (val >= caps->nrseqstate)
return -EINVAL;
config->seq_state = val;
@@ -1496,11 +1525,12 @@ static ssize_t seq_reset_event_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
- if (!(drvdata->nrseqstate))
+ if (!(caps->nrseqstate))
return -EINVAL;
config->seq_rst = val & ETMv4_EVENT_MASK;
@@ -1526,11 +1556,12 @@ static ssize_t cntr_idx_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
- if (val >= drvdata->nr_cntr)
+ if (val >= caps->nr_cntr)
return -EINVAL;
/*
@@ -1674,6 +1705,7 @@ static ssize_t res_idx_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
@@ -1682,7 +1714,7 @@ static ssize_t res_idx_store(struct device *dev,
* Resource selector pair 0 is always implemented and reserved,
* namely an idx with 0 and 1 is illegal.
*/
- if ((val < 2) || (val >= 2 * drvdata->nr_resource))
+ if ((val < 2) || (val >= 2 * caps->nr_resource))
return -EINVAL;
/*
@@ -1756,11 +1788,12 @@ static ssize_t sshot_idx_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
- if (val >= drvdata->nr_ss_cmp)
+ if (val >= caps->nr_ss_cmp)
return -EINVAL;
raw_spin_lock(&drvdata->spinlock);
@@ -1874,11 +1907,12 @@ static ssize_t ctxid_idx_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
- if (val >= drvdata->numcidc)
+ if (val >= caps->numcidc)
return -EINVAL;
/*
@@ -1922,6 +1956,7 @@ static ssize_t ctxid_pid_store(struct device *dev,
u8 idx;
unsigned long pid;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
/*
@@ -1941,7 +1976,7 @@ static ssize_t ctxid_pid_store(struct device *dev,
* ctxid comparator is implemented and ctxid is greater than 0 bits
* in length
*/
- if (!drvdata->ctxid_size || !drvdata->numcidc)
+ if (!caps->ctxid_size || !caps->numcidc)
return -EINVAL;
if (kstrtoul(buf, 16, &pid))
return -EINVAL;
@@ -1983,6 +2018,7 @@ static ssize_t ctxid_masks_store(struct device *dev,
u8 i, j, maskbyte;
unsigned long val1, val2, mask;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
int nr_inputs;
@@ -1998,11 +2034,11 @@ static ssize_t ctxid_masks_store(struct device *dev,
* ctxid comparator is implemented and ctxid is greater than 0 bits
* in length
*/
- if (!drvdata->ctxid_size || !drvdata->numcidc)
+ if (!caps->ctxid_size || !caps->numcidc)
return -EINVAL;
/* one mask if <= 4 comparators, two for up to 8 */
nr_inputs = sscanf(buf, "%lx %lx", &val1, &val2);
- if ((drvdata->numcidc > 4) && (nr_inputs != 2))
+ if ((caps->numcidc > 4) && (nr_inputs != 2))
return -EINVAL;
raw_spin_lock(&drvdata->spinlock);
@@ -2010,7 +2046,7 @@ static ssize_t ctxid_masks_store(struct device *dev,
* each byte[0..3] controls mask value applied to ctxid
* comparator[0..3]
*/
- switch (drvdata->numcidc) {
+ switch (caps->numcidc) {
case 0x1:
/* COMP0, bits[7:0] */
config->ctxid_mask0 = val1 & 0xFF;
@@ -2057,7 +2093,7 @@ static ssize_t ctxid_masks_store(struct device *dev,
* of ctxid comparator0 value (corresponding to byte 0) register.
*/
mask = config->ctxid_mask0;
- for (i = 0; i < drvdata->numcidc; i++) {
+ for (i = 0; i < caps->numcidc; i++) {
/* mask value of corresponding ctxid comparator */
maskbyte = mask & ETMv4_EVENT_MASK;
/*
@@ -2100,11 +2136,12 @@ static ssize_t vmid_idx_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
- if (val >= drvdata->numvmidc)
+ if (val >= caps->numvmidc)
return -EINVAL;
/*
@@ -2145,6 +2182,7 @@ static ssize_t vmid_val_store(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
/*
@@ -2158,7 +2196,7 @@ static ssize_t vmid_val_store(struct device *dev,
* only implemented when vmid tracing is enabled, i.e. at least one
* vmid comparator is implemented and at least 8 bit vmid size
*/
- if (!drvdata->vmid_size || !drvdata->numvmidc)
+ if (!caps->vmid_size || !caps->numvmidc)
return -EINVAL;
if (kstrtoul(buf, 16, &val))
return -EINVAL;
@@ -2198,6 +2236,7 @@ static ssize_t vmid_masks_store(struct device *dev,
u8 i, j, maskbyte;
unsigned long val1, val2, mask;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
int nr_inputs;
@@ -2212,11 +2251,11 @@ static ssize_t vmid_masks_store(struct device *dev,
* only implemented when vmid tracing is enabled, i.e. at least one
* vmid comparator is implemented and at least 8 bit vmid size
*/
- if (!drvdata->vmid_size || !drvdata->numvmidc)
+ if (!caps->vmid_size || !caps->numvmidc)
return -EINVAL;
/* one mask if <= 4 comparators, two for up to 8 */
nr_inputs = sscanf(buf, "%lx %lx", &val1, &val2);
- if ((drvdata->numvmidc > 4) && (nr_inputs != 2))
+ if ((caps->numvmidc > 4) && (nr_inputs != 2))
return -EINVAL;
raw_spin_lock(&drvdata->spinlock);
@@ -2225,7 +2264,7 @@ static ssize_t vmid_masks_store(struct device *dev,
* each byte[0..3] controls mask value applied to vmid
* comparator[0..3]
*/
- switch (drvdata->numvmidc) {
+ switch (caps->numvmidc) {
case 0x1:
/* COMP0, bits[7:0] */
config->vmid_mask0 = val1 & 0xFF;
@@ -2273,7 +2312,7 @@ static ssize_t vmid_masks_store(struct device *dev,
* of vmid comparator0 value (corresponding to byte 0) register.
*/
mask = config->vmid_mask0;
- for (i = 0; i < drvdata->numvmidc; i++) {
+ for (i = 0; i < caps->numvmidc; i++) {
/* mask value of corresponding vmid comparator */
maskbyte = mask & ETMv4_EVENT_MASK;
/*
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
index 89d81ce4e04e..3e20561672dc 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.h
+++ b/drivers/hwtracing/coresight/coresight-etm4x.h
@@ -812,6 +812,94 @@ enum etm_impdef_type {
ETM4_IMPDEF_FEATURE_MAX,
};
+/**
+ * struct etmv4_caps - specifics ETM capabilities
+ * @nr_pe: The number of processing entity available for tracing.
+ * @nr_pe_cmp: The number of processing entity comparator inputs that are
+ * available for tracing.
+ * @nr_addr_cmp:Number of pairs of address comparators available
+ * as found in ETMIDR4 0-3.
+ * @nr_cntr: Number of counters as found in ETMIDR5 bit 28-30.
+ * @nr_ext_inp: Number of external input.
+ * @numcidc: Number of contextID comparators.
+ * @numvmidc: Number of VMID comparators.
+ * @nrseqstate: The number of sequencer states that are implemented.
+ * @nr_event: Indicates how many events the trace unit support.
+ * @nr_resource:The number of resource selection pairs available for tracing.
+ * @nr_ss_cmp: Number of single-shot comparator controls that are available.
+ * @trcid_size: Indicates the trace ID width.
+ * @ts_size: Global timestamp size field.
+ * @ctxid_size: Size of the context ID field to consider.
+ * @vmid_size: Size of the VM ID comparator to consider.
+ * @ccsize: Indicates the size of the cycle counter in bits.
+ * @ccitmin: minimum value that can be programmed in
+ * @s_ex_level: In secure state, indicates whether instruction tracing is
+ * supported for the corresponding Exception level.
+ * @ns_ex_level:In non-secure state, indicates whether instruction tracing is
+ * supported for the corresponding Exception level.
+ * @q_support: Q element support characteristics.
+ * @os_lock_model: OSLock model.
+ * @instrp0: Tracing of load and store instructions
+ * as P0 elements is supported.
+ * @q_filt: Q element filtering support, if Q elements are supported.
+ * @trcbb: Indicates if the trace unit supports branch broadcast tracing.
+ * @trccond: If the trace unit supports conditional
+ * instruction tracing.
+ * @retstack: Indicates if the implementation supports a return stack.
+ * @trccci: Indicates if the trace unit supports cycle counting
+ * for instruction.
+ * @trc_error: Whether a trace unit can trace a system
+ * error exception.
+ * @syncpr: Indicates if an implementation has a fixed
+ * synchronization period.
+ * @stallctl: If functionality that prevents trace unit buffer overflows
+ * is available.
+ * @sysstall: Does the system support stall control of the PE?
+ * @nooverflow: Indicate if overflow prevention is supported.
+ * @atbtrig: If the implementation can support ATB triggers
+ * @lpoverride: If the implementation can support low-power state over.
+ * @skip_power_up: Indicates if an implementation can skip powering up
+ * the trace unit.
+ */
+struct etmv4_caps {
+ u8 nr_pe;
+ u8 nr_pe_cmp;
+ u8 nr_addr_cmp;
+ u8 nr_cntr;
+ u8 nr_ext_inp;
+ u8 numcidc;
+ u8 numextinsel;
+ u8 numvmidc;
+ u8 nrseqstate;
+ u8 nr_event;
+ u8 nr_resource;
+ u8 nr_ss_cmp;
+ u8 trcid_size;
+ u8 ts_size;
+ u8 ctxid_size;
+ u8 vmid_size;
+ u8 ccsize;
+ u16 ccitmin;
+ u8 s_ex_level;
+ u8 ns_ex_level;
+ u8 q_support;
+ u8 os_lock_model;
+ bool instrp0 : 1;
+ bool q_filt : 1;
+ bool trcbb : 1;
+ bool trccond : 1;
+ bool retstack : 1;
+ bool trccci : 1;
+ bool trc_error : 1;
+ bool syncpr : 1;
+ bool stallctl : 1;
+ bool sysstall : 1;
+ bool nooverflow : 1;
+ bool atbtrig : 1;
+ bool lpoverride : 1;
+ bool skip_power_up : 1;
+};
+
/**
* struct etmv4_config - configuration information related to an ETMv4
* @mode: Controls various modes supported by this ETM.
@@ -819,8 +907,8 @@ enum etm_impdef_type {
* @cfg: Controls the tracing options.
* @eventctrl0: Controls the tracing of arbitrary events.
* @eventctrl1: Controls the behavior of the events that @event_ctrl0 selects.
- * @stallctl: If functionality that prevents trace unit buffer overflows
- * is available.
+ * @stall_ctrl: Enables trace unit functionality that prevents trace
+ * unit buffer overflows.
* @ts_ctrl: Controls the insertion of global timestamps in the
* trace streams.
* @syncfreq: Controls how often trace synchronization requests occur.
@@ -971,61 +1059,17 @@ struct etmv4_save_state {
* @mode: This tracer's mode, i.e sysFS, Perf or disabled.
* @cpu: The cpu this component is affined to.
* @arch: ETM architecture version.
- * @nr_pe: The number of processing entity available for tracing.
- * @nr_pe_cmp: The number of processing entity comparator inputs that are
- * available for tracing.
- * @nr_addr_cmp:Number of pairs of address comparators available
- * as found in ETMIDR4 0-3.
- * @nr_cntr: Number of counters as found in ETMIDR5 bit 28-30.
- * @nr_ext_inp: Number of external input.
- * @numcidc: Number of contextID comparators.
- * @numvmidc: Number of VMID comparators.
- * @nrseqstate: The number of sequencer states that are implemented.
- * @nr_event: Indicates how many events the trace unit support.
- * @nr_resource:The number of resource selection pairs available for tracing.
- * @nr_ss_cmp: Number of single-shot comparator controls that are available.
+ * @caps: ETM capabilities.
* @trcid: value of the current ID for this component.
- * @trcid_size: Indicates the trace ID width.
- * @ts_size: Global timestamp size field.
- * @ctxid_size: Size of the context ID field to consider.
- * @vmid_size: Size of the VM ID comparator to consider.
- * @ccsize: Indicates the size of the cycle counter in bits.
- * @ccitmin: minimum value that can be programmed in
- * @s_ex_level: In secure state, indicates whether instruction tracing is
- * supported for the corresponding Exception level.
- * @ns_ex_level:In non-secure state, indicates whether instruction tracing is
- * supported for the corresponding Exception level.
* @sticky_enable: true if ETM base configuration has been done.
* @boot_enable:True if we should start tracing at boot time.
* @os_unlock: True if access to management registers is allowed.
- * @instrp0: Tracing of load and store instructions
- * as P0 elements is supported.
- * @q_filt: Q element filtering support, if Q elements are supported.
- * @trcbb: Indicates if the trace unit supports branch broadcast tracing.
- * @trccond: If the trace unit supports conditional
- * instruction tracing.
- * @retstack: Indicates if the implementation supports a return stack.
- * @trccci: Indicates if the trace unit supports cycle counting
- * for instruction.
- * @q_support: Q element support characteristics.
- * @trc_error: Whether a trace unit can trace a system
- * error exception.
- * @syncpr: Indicates if an implementation has a fixed
- * synchronization period.
- * @stall_ctrl: Enables trace unit functionality that prevents trace
- * unit buffer overflows.
- * @sysstall: Does the system support stall control of the PE?
- * @nooverflow: Indicate if overflow prevention is supported.
- * @atbtrig: If the implementation can support ATB triggers
- * @lpoverride: If the implementation can support low-power state over.
* @trfcr: If the CPU supports FEAT_TRF, value of the TRFCR_ELx that
* allows tracing at all ELs. We don't want to compute this
* at runtime, due to the additional setting of TRFCR_CX when
* in EL2. Otherwise, 0.
* @config: structure holding configuration parameters.
* @save_state: State to be preserved across power loss
- * @skip_power_up: Indicates if an implementation can skip powering up
- * the trace unit.
* @paused: Indicates if the trace unit is paused.
* @arch_features: Bitmap of arch features of etmv4 devices.
*/
@@ -1037,46 +1081,11 @@ struct etmv4_drvdata {
raw_spinlock_t spinlock;
int cpu;
u8 arch;
- u8 nr_pe;
- u8 nr_pe_cmp;
- u8 nr_addr_cmp;
- u8 nr_cntr;
- u8 nr_ext_inp;
- u8 numcidc;
- u8 numextinsel;
- u8 numvmidc;
- u8 nrseqstate;
- u8 nr_event;
- u8 nr_resource;
- u8 nr_ss_cmp;
+ struct etmv4_caps caps;
u8 trcid;
- u8 trcid_size;
- u8 ts_size;
- u8 ctxid_size;
- u8 vmid_size;
- u8 ccsize;
- u16 ccitmin;
- u8 s_ex_level;
- u8 ns_ex_level;
- u8 q_support;
- u8 os_lock_model;
bool sticky_enable : 1;
bool boot_enable : 1;
bool os_unlock : 1;
- bool instrp0 : 1;
- bool q_filt : 1;
- bool trcbb : 1;
- bool trccond : 1;
- bool retstack : 1;
- bool trccci : 1;
- bool trc_error : 1;
- bool syncpr : 1;
- bool stallctl : 1;
- bool sysstall : 1;
- bool nooverflow : 1;
- bool atbtrig : 1;
- bool lpoverride : 1;
- bool skip_power_up : 1;
bool paused : 1;
u64 trfcr;
struct etmv4_config config;
--
LEVI:{C3F47F37-75D8-414A-A8BA-3980EC8A46D7}
^ permalink raw reply related
* [PATCH v2 4/5] coresight: etm3x: introduce struct etm_caps
From: Yeoreum Yun @ 2026-04-10 7:43 UTC (permalink / raw)
To: coresight, linux-arm-kernel, linux-kernel
Cc: suzuki.poulose, mike.leach, james.clark, alexander.shishkin,
leo.yan, Yeoreum Yun
In-Reply-To: <20260410074310.2693385-1-yeoreum.yun@arm.com>
Introduce struct etm_caps to describe ETMv3 capabilities
and move capabilities information into it.
Since drvdata->etmccr and drvdata->etmccer are used to check
whether it supports fifofull logic and timestamping,
remove etmccr and etmccer field from drvdata and add relevant fields
in etm_caps structure.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
---
drivers/hwtracing/coresight/coresight-etm.h | 40 +++++++++++--------
.../coresight/coresight-etm3x-core.c | 33 ++++++++-------
.../coresight/coresight-etm3x-sysfs.c | 14 ++++---
3 files changed, 52 insertions(+), 35 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm.h b/drivers/hwtracing/coresight/coresight-etm.h
index 1d753cca2943..6fda26039db8 100644
--- a/drivers/hwtracing/coresight/coresight-etm.h
+++ b/drivers/hwtracing/coresight/coresight-etm.h
@@ -140,6 +140,28 @@
ETM_ADD_COMP_0 | \
ETM_EVENT_NOT_A)
+/**
+ * struct etmv4_caps - specifics ETM capabilities
+ * @port_size: port size as reported by ETMCR bit 4-6 and 21.
+ * @nr_addr_cmp:Number of pairs of address comparators as found in ETMCCR.
+ * @nr_cntr: Number of counters as found in ETMCCR bit 13-15.
+ * @nr_ext_inp: Number of external input as found in ETMCCR bit 17-19.
+ * @nr_ext_out: Number of external output as found in ETMCCR bit 20-22.
+ * @nr_ctxid_cmp: Number of contextID comparators as found in ETMCCR bit 24-25.
+ * @fifofull: FIFOFULL logic is present.
+ * @timestamp: Timestamping is implemented.
+ */
+struct etm_caps {
+ int port_size;
+ u8 nr_addr_cmp;
+ u8 nr_cntr;
+ u8 nr_ext_inp;
+ u8 nr_ext_out;
+ u8 nr_ctxid_cmp;
+ bool fifofull : 1;
+ bool timestamp : 1;
+};
+
/**
* struct etm_config - configuration information related to an ETM
* @mode: controls various modes supported by this ETM/PTM.
@@ -212,19 +234,12 @@ struct etm_config {
* @csdev: component vitals needed by the framework.
* @spinlock: only one at a time pls.
* @cpu: the cpu this component is affined to.
- * @port_size: port size as reported by ETMCR bit 4-6 and 21.
* @arch: ETM/PTM version number.
+ * @caps: ETM capabilities.
* @use_cpu14: true if management registers need to be accessed via CP14.
* @sticky_enable: true if ETM base configuration has been done.
* @boot_enable:true if we should start tracing at boot time.
* @os_unlock: true if access to management registers is allowed.
- * @nr_addr_cmp:Number of pairs of address comparators as found in ETMCCR.
- * @nr_cntr: Number of counters as found in ETMCCR bit 13-15.
- * @nr_ext_inp: Number of external input as found in ETMCCR bit 17-19.
- * @nr_ext_out: Number of external output as found in ETMCCR bit 20-22.
- * @nr_ctxid_cmp: Number of contextID comparators as found in ETMCCR bit 24-25.
- * @etmccr: value of register ETMCCR.
- * @etmccer: value of register ETMCCER.
* @traceid: value of the current ID for this component.
* @config: structure holding configuration parameters.
*/
@@ -234,19 +249,12 @@ struct etm_drvdata {
struct coresight_device *csdev;
spinlock_t spinlock;
int cpu;
- int port_size;
u8 arch;
+ struct etm_caps caps;
bool use_cp14;
bool sticky_enable;
bool boot_enable;
bool os_unlock;
- u8 nr_addr_cmp;
- u8 nr_cntr;
- u8 nr_ext_inp;
- u8 nr_ext_out;
- u8 nr_ctxid_cmp;
- u32 etmccr;
- u32 etmccer;
u32 traceid;
struct etm_config config;
};
diff --git a/drivers/hwtracing/coresight/coresight-etm3x-core.c b/drivers/hwtracing/coresight/coresight-etm3x-core.c
index a547a6d2e0bd..b7e977defb1c 100644
--- a/drivers/hwtracing/coresight/coresight-etm3x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm3x-core.c
@@ -367,6 +367,7 @@ static int etm_enable_hw(struct etm_drvdata *drvdata)
{
int i, rc;
u32 etmcr;
+ const struct etm_caps *caps = &drvdata->caps;
struct etm_config *config = &drvdata->config;
struct coresight_device *csdev = drvdata->csdev;
@@ -388,7 +389,7 @@ static int etm_enable_hw(struct etm_drvdata *drvdata)
etmcr = etm_readl(drvdata, ETMCR);
/* Clear setting from a previous run if need be */
etmcr &= ~ETM3X_SUPPORTED_OPTIONS;
- etmcr |= drvdata->port_size;
+ etmcr |= caps->port_size;
etmcr |= ETMCR_ETM_EN;
etm_writel(drvdata, config->ctrl | etmcr, ETMCR);
etm_writel(drvdata, config->trigger_event, ETMTRIGGER);
@@ -396,11 +397,11 @@ static int etm_enable_hw(struct etm_drvdata *drvdata)
etm_writel(drvdata, config->enable_event, ETMTEEVR);
etm_writel(drvdata, config->enable_ctrl1, ETMTECR1);
etm_writel(drvdata, config->fifofull_level, ETMFFLR);
- for (i = 0; i < drvdata->nr_addr_cmp; i++) {
+ for (i = 0; i < caps->nr_addr_cmp; i++) {
etm_writel(drvdata, config->addr_val[i], ETMACVRn(i));
etm_writel(drvdata, config->addr_acctype[i], ETMACTRn(i));
}
- for (i = 0; i < drvdata->nr_cntr; i++) {
+ for (i = 0; i < caps->nr_cntr; i++) {
etm_writel(drvdata, config->cntr_rld_val[i], ETMCNTRLDVRn(i));
etm_writel(drvdata, config->cntr_event[i], ETMCNTENRn(i));
etm_writel(drvdata, config->cntr_rld_event[i],
@@ -414,9 +415,9 @@ static int etm_enable_hw(struct etm_drvdata *drvdata)
etm_writel(drvdata, config->seq_32_event, ETMSQ32EVR);
etm_writel(drvdata, config->seq_13_event, ETMSQ13EVR);
etm_writel(drvdata, config->seq_curr_state, ETMSQR);
- for (i = 0; i < drvdata->nr_ext_out; i++)
+ for (i = 0; i < caps->nr_ext_out; i++)
etm_writel(drvdata, ETM_DEFAULT_EVENT_VAL, ETMEXTOUTEVRn(i));
- for (i = 0; i < drvdata->nr_ctxid_cmp; i++)
+ for (i = 0; i < caps->nr_ctxid_cmp; i++)
etm_writel(drvdata, config->ctxid_pid[i], ETMCIDCVRn(i));
etm_writel(drvdata, config->ctxid_mask, ETMCIDCMR);
etm_writel(drvdata, config->sync_freq, ETMSYNCFR);
@@ -572,7 +573,7 @@ static void etm_disable_hw(struct etm_drvdata *drvdata)
/* Read back sequencer and counters for post trace analysis */
config->seq_curr_state = (etm_readl(drvdata, ETMSQR) & ETM_SQR_MASK);
- for (i = 0; i < drvdata->nr_cntr; i++)
+ for (i = 0; i < caps->nr_cntr; i++)
config->cntr_val[i] = etm_readl(drvdata, ETMCNTVRn(i));
etm_set_pwrdwn(drvdata);
@@ -754,7 +755,9 @@ static void etm_init_arch_data(void *info)
{
u32 etmidr;
u32 etmccr;
+ u32 etmccer;
struct etm_drvdata *drvdata = info;
+ struct etm_caps *caps = &drvdata->caps;
/* Make sure all registers are accessible */
etm_os_unlock(drvdata);
@@ -779,16 +782,18 @@ static void etm_init_arch_data(void *info)
/* Find all capabilities */
etmidr = etm_readl(drvdata, ETMIDR);
drvdata->arch = BMVAL(etmidr, 4, 11);
- drvdata->port_size = etm_readl(drvdata, ETMCR) & PORT_SIZE_MASK;
+ caps->port_size = etm_readl(drvdata, ETMCR) & PORT_SIZE_MASK;
+
+ etmccer = etm_readl(drvdata, ETMCCER);
+ caps->timestamp = !!(drvdata->etmccer & ETMCCER_TIMESTAMP);
- drvdata->etmccer = etm_readl(drvdata, ETMCCER);
etmccr = etm_readl(drvdata, ETMCCR);
- drvdata->etmccr = etmccr;
- drvdata->nr_addr_cmp = BMVAL(etmccr, 0, 3) * 2;
- drvdata->nr_cntr = BMVAL(etmccr, 13, 15);
- drvdata->nr_ext_inp = BMVAL(etmccr, 17, 19);
- drvdata->nr_ext_out = BMVAL(etmccr, 20, 22);
- drvdata->nr_ctxid_cmp = BMVAL(etmccr, 24, 25);
+ caps->fifofull = !!(drvdata->etmccr & ETMCCR_FIFOFULL);
+ caps->nr_addr_cmp = BMVAL(etmccr, 0, 3) * 2;
+ caps->nr_cntr = BMVAL(etmccr, 13, 15);
+ caps->nr_ext_inp = BMVAL(etmccr, 17, 19);
+ caps->nr_ext_out = BMVAL(etmccr, 20, 22);
+ caps->nr_ctxid_cmp = BMVAL(etmccr, 24, 25);
coresight_clear_self_claim_tag_unlocked(&drvdata->csa);
etm_set_pwrdwn(drvdata);
diff --git a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
index 762109307b86..0d8dac29d055 100644
--- a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
@@ -111,6 +111,7 @@ static ssize_t mode_store(struct device *dev,
int ret;
unsigned long val;
struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etm_caps *caps = &drvdata->caps;
struct etm_config *config = &drvdata->config;
ret = kstrtoul(buf, 16, &val);
@@ -131,7 +132,7 @@ static ssize_t mode_store(struct device *dev,
config->ctrl &= ~ETMCR_CYC_ACC;
if (config->mode & ETM_MODE_STALL) {
- if (!(drvdata->etmccr & ETMCCR_FIFOFULL)) {
+ if (!caps->fifofull) {
dev_warn(dev, "stall mode not supported\n");
ret = -EINVAL;
goto err_unlock;
@@ -141,7 +142,7 @@ static ssize_t mode_store(struct device *dev,
config->ctrl &= ~ETMCR_STALL_MODE;
if (config->mode & ETM_MODE_TIMESTAMP) {
- if (!(drvdata->etmccer & ETMCCER_TIMESTAMP)) {
+ if (!caps->timestamp) {
dev_warn(dev, "timestamp not supported\n");
ret = -EINVAL;
goto err_unlock;
@@ -286,13 +287,14 @@ static ssize_t addr_idx_store(struct device *dev,
int ret;
unsigned long val;
struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etm_caps *caps = &drvdata->caps;
struct etm_config *config = &drvdata->config;
ret = kstrtoul(buf, 16, &val);
if (ret)
return ret;
- if (val >= drvdata->nr_addr_cmp)
+ if (val >= caps->nr_addr_cmp)
return -EINVAL;
/*
@@ -589,13 +591,14 @@ static ssize_t cntr_idx_store(struct device *dev,
int ret;
unsigned long val;
struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etm_caps *caps = &drvdata->caps;
struct etm_config *config = &drvdata->config;
ret = kstrtoul(buf, 16, &val);
if (ret)
return ret;
- if (val >= drvdata->nr_cntr)
+ if (val >= caps->nr_cntr)
return -EINVAL;
/*
* Use spinlock to ensure index doesn't change while it gets
@@ -999,13 +1002,14 @@ static ssize_t ctxid_idx_store(struct device *dev,
int ret;
unsigned long val;
struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etm_caps *caps = &drvdata->caps;
struct etm_config *config = &drvdata->config;
ret = kstrtoul(buf, 16, &val);
if (ret)
return ret;
- if (val >= drvdata->nr_ctxid_cmp)
+ if (val >= caps->nr_ctxid_cmp)
return -EINVAL;
/*
--
LEVI:{C3F47F37-75D8-414A-A8BA-3980EC8A46D7}
^ permalink raw reply related
* [PATCH v2 3/5] coresight: etm4x: fix inconsistencies with sysfs configration
From: Yeoreum Yun @ 2026-04-10 7:43 UTC (permalink / raw)
To: coresight, linux-arm-kernel, linux-kernel
Cc: suzuki.poulose, mike.leach, james.clark, alexander.shishkin,
leo.yan, Yeoreum Yun
In-Reply-To: <20260410074310.2693385-1-yeoreum.yun@arm.com>
The current ETM4x configuration via sysfs can lead to the following
inconsistencies:
- If a configuration is modified via sysfs while a perf session is
active, the running configuration may differ between before
a sched-out and after a subsequent sched-in.
- If a perf session and sysfs session tries to enable concurrently,
configuration from configfs could be corrupted.
- There is chance to corrupt drvdata->config if perf session tries
to enabled among handling cscfg_csdev_disable_active_config()
in etm4_disable_sysfs().
To resolve these inconsistencies, the configuration should be separated into:
- active_config, which is applied configuration for the current session
- config, which stores the settings configured via sysfs.
and apply configuration from configfs after taking a mode.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
---
.../hwtracing/coresight/coresight-etm4x-cfg.c | 2 +-
.../coresight/coresight-etm4x-core.c | 74 ++++++++++++-------
drivers/hwtracing/coresight/coresight-etm4x.h | 2 +
3 files changed, 49 insertions(+), 29 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-cfg.c b/drivers/hwtracing/coresight/coresight-etm4x-cfg.c
index d14d7c8a23e5..0553771d04e7 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-cfg.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-cfg.c
@@ -47,7 +47,7 @@ static int etm4_cfg_map_reg_offset(struct etmv4_drvdata *drvdata,
struct cscfg_regval_csdev *reg_csdev, u32 offset)
{
int err = -EINVAL, idx;
- struct etmv4_config *drvcfg = &drvdata->config;
+ struct etmv4_config *drvcfg = &drvdata->active_config;
u32 off_mask;
if (((offset >= TRCEVENTCTL0R) && (offset <= TRCVIPCSSCTLR)) ||
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index b7abb171f523..c7b4a0b85106 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -245,6 +245,9 @@ void etm4_release_trace_id(struct etmv4_drvdata *drvdata)
struct etm4_enable_arg {
struct etmv4_drvdata *drvdata;
+ unsigned long cfg_hash;
+ int preset;
+ u8 trace_id;
int rc;
};
@@ -270,10 +273,11 @@ static void etm4x_prohibit_trace(struct etmv4_drvdata *drvdata)
static u64 etm4x_get_kern_user_filter(struct etmv4_drvdata *drvdata)
{
u64 trfcr = drvdata->trfcr;
+ struct etmv4_config *config = &drvdata->active_config;
- if (drvdata->config.mode & ETM_MODE_EXCL_KERN)
+ if (config->mode & ETM_MODE_EXCL_KERN)
trfcr &= ~TRFCR_EL1_ExTRE;
- if (drvdata->config.mode & ETM_MODE_EXCL_USER)
+ if (config->mode & ETM_MODE_EXCL_USER)
trfcr &= ~TRFCR_EL1_E0TRE;
return trfcr;
@@ -281,7 +285,7 @@ static u64 etm4x_get_kern_user_filter(struct etmv4_drvdata *drvdata)
/*
* etm4x_allow_trace - Allow CPU tracing in the respective ELs,
- * as configured by the drvdata->config.mode for the current
+ * as configured by the drvdata->active_config.mode for the current
* session. Even though we have TRCVICTLR bits to filter the
* trace in the ELs, it doesn't prevent the ETM from generating
* a packet (e.g, TraceInfo) that might contain the addresses from
@@ -292,12 +296,13 @@ static u64 etm4x_get_kern_user_filter(struct etmv4_drvdata *drvdata)
static void etm4x_allow_trace(struct etmv4_drvdata *drvdata)
{
u64 trfcr, guest_trfcr;
+ struct etmv4_config *config = &drvdata->active_config;
/* If the CPU doesn't support FEAT_TRF, nothing to do */
if (!drvdata->trfcr)
return;
- if (drvdata->config.mode & ETM_MODE_EXCL_HOST)
+ if (config->mode & ETM_MODE_EXCL_HOST)
trfcr = drvdata->trfcr & ~(TRFCR_EL1_ExTRE | TRFCR_EL1_E0TRE);
else
trfcr = etm4x_get_kern_user_filter(drvdata);
@@ -305,7 +310,7 @@ static void etm4x_allow_trace(struct etmv4_drvdata *drvdata)
write_trfcr(trfcr);
/* Set filters for guests and pass to KVM */
- if (drvdata->config.mode & ETM_MODE_EXCL_GUEST)
+ if (config->mode & ETM_MODE_EXCL_GUEST)
guest_trfcr = drvdata->trfcr & ~(TRFCR_EL1_ExTRE | TRFCR_EL1_E0TRE);
else
guest_trfcr = etm4x_get_kern_user_filter(drvdata);
@@ -499,7 +504,7 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
{
int i, rc;
const struct etmv4_caps *caps = &drvdata->caps;
- struct etmv4_config *config = &drvdata->config;
+ struct etmv4_config *config = &drvdata->active_config;
struct coresight_device *csdev = drvdata->csdev;
struct device *etm_dev = &csdev->dev;
struct csdev_access *csa = &csdev->access;
@@ -616,19 +621,36 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
static void etm4_enable_sysfs_smp_call(void *info)
{
struct etm4_enable_arg *arg = info;
+ struct etmv4_drvdata *drvdata;
struct coresight_device *csdev;
if (WARN_ON(!arg))
return;
- csdev = arg->drvdata->csdev;
+ drvdata = arg->drvdata;
+ csdev = drvdata->csdev;
if (!coresight_take_mode(csdev, CS_MODE_SYSFS)) {
/* Someone is already using the tracer */
arg->rc = -EBUSY;
return;
}
- arg->rc = etm4_enable_hw(arg->drvdata);
+ drvdata->active_config = drvdata->config;
+
+ if (arg->cfg_hash) {
+ arg->rc = cscfg_csdev_enable_active_config(csdev,
+ arg->cfg_hash,
+ arg->preset);
+ if (arg->rc)
+ return;
+ }
+
+ drvdata->trcid = arg->trace_id;
+
+ /* Tracer will never be paused in sysfs mode */
+ drvdata->paused = false;
+
+ arg->rc = etm4_enable_hw(drvdata);
/* The tracer didn't start */
if (arg->rc)
@@ -670,7 +692,7 @@ static int etm4_config_timestamp_event(struct etmv4_drvdata *drvdata,
int ctridx;
int rselector;
const struct etmv4_caps *caps = &drvdata->caps;
- struct etmv4_config *config = &drvdata->config;
+ struct etmv4_config *config = &drvdata->active_config;
/* No point in trying if we don't have at least one counter */
if (!caps->nr_cntr)
@@ -754,7 +776,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev,
int ret = 0;
struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
const struct etmv4_caps *caps = &drvdata->caps;
- struct etmv4_config *config = &drvdata->config;
+ struct etmv4_config *config = &drvdata->active_config;
struct perf_event_attr max_timestamp = {
.ATTR_CFG_FLD_timestamp_CFG = U64_MAX,
};
@@ -916,24 +938,18 @@ static int etm4_enable_sysfs(struct coresight_device *csdev, struct coresight_pa
/* enable any config activated by configfs */
cscfg_config_sysfs_get_active_cfg(&cfg_hash, &preset);
- if (cfg_hash) {
- ret = cscfg_csdev_enable_active_config(csdev, cfg_hash, preset);
- if (ret)
- return ret;
- }
raw_spin_lock(&drvdata->spinlock);
- drvdata->trcid = path->trace_id;
-
- /* Tracer will never be paused in sysfs mode */
- drvdata->paused = false;
-
/*
* Executing etm4_enable_hw on the cpu whose ETM is being enabled
* ensures that register writes occur when cpu is powered.
*/
arg.drvdata = drvdata;
+ arg.cfg_hash = cfg_hash;
+ arg.preset = preset;
+ arg.trace_id = path->trace_id;
+
ret = smp_call_function_single(drvdata->cpu,
etm4_enable_sysfs_smp_call, &arg, 1);
if (!ret)
@@ -1034,7 +1050,7 @@ static void etm4_disable_hw(struct etmv4_drvdata *drvdata)
{
u32 control;
const struct etmv4_caps *caps = &drvdata->caps;
- struct etmv4_config *config = &drvdata->config;
+ struct etmv4_config *config = &drvdata->active_config;
struct coresight_device *csdev = drvdata->csdev;
struct csdev_access *csa = &csdev->access;
int i;
@@ -1070,6 +1086,8 @@ static void etm4_disable_sysfs_smp_call(void *info)
etm4_disable_hw(drvdata);
+ cscfg_csdev_disable_active_config(drvdata->csdev);
+
coresight_set_mode(drvdata->csdev, CS_MODE_DISABLED);
}
@@ -1130,9 +1148,6 @@ static void etm4_disable_sysfs(struct coresight_device *csdev)
drvdata, 1);
raw_spin_unlock(&drvdata->spinlock);
-
- cscfg_csdev_disable_active_config(csdev);
-
cpus_read_unlock();
/*
@@ -1375,6 +1390,7 @@ static void etm4_init_arch_data(void *info)
struct etm4_init_arg *init_arg = info;
struct etmv4_drvdata *drvdata;
struct etmv4_caps *caps;
+ struct etmv4_config *config;
struct csdev_access *csa;
struct device *dev = init_arg->dev;
int i;
@@ -1382,6 +1398,7 @@ static void etm4_init_arch_data(void *info)
drvdata = dev_get_drvdata(init_arg->dev);
caps = &drvdata->caps;
csa = init_arg->csa;
+ config = &drvdata->active_config;
/*
* If we are unable to detect the access mechanism,
@@ -1442,7 +1459,7 @@ static void etm4_init_arch_data(void *info)
/* EXLEVEL_S, bits[19:16] Secure state instruction tracing */
caps->s_ex_level = FIELD_GET(TRCIDR3_EXLEVEL_S_MASK, etmidr3);
- drvdata->config.s_ex_level = caps->s_ex_level;
+ config->s_ex_level = caps->s_ex_level;
/* EXLEVEL_NS, bits[23:20] Non-secure state instruction tracing */
caps->ns_ex_level = FIELD_GET(TRCIDR3_EXLEVEL_NS_MASK, etmidr3);
/*
@@ -1687,7 +1704,7 @@ static void etm4_set_default(struct etmv4_config *config)
static int etm4_get_next_comparator(struct etmv4_drvdata *drvdata, u32 type)
{
int nr_comparator, index = 0;
- struct etmv4_config *config = &drvdata->config;
+ struct etmv4_config *config = &drvdata->active_config;
/*
* nr_addr_cmp holds the number of comparator _pair_, so time 2
@@ -1728,7 +1745,7 @@ static int etm4_set_event_filters(struct etmv4_drvdata *drvdata,
{
int i, comparator, ret = 0;
u64 address;
- struct etmv4_config *config = &drvdata->config;
+ struct etmv4_config *config = &drvdata->active_config;
struct etm_filters *filters = event->hw.addr_filters;
if (!filters)
@@ -2250,7 +2267,8 @@ static int etm4_add_coresight_dev(struct etm4_init_arg *init_arg)
if (!desc.name)
return -ENOMEM;
- etm4_set_default(&drvdata->config);
+ etm4_set_default(&drvdata->active_config);
+ drvdata->config = drvdata->active_config;
pdata = coresight_get_platform_data(dev);
if (IS_ERR(pdata))
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
index 57508d301327..33a4f68dd0cb 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.h
+++ b/drivers/hwtracing/coresight/coresight-etm4x.h
@@ -1069,6 +1069,7 @@ struct etmv4_save_state {
* allows tracing at all ELs. We don't want to compute this
* at runtime, due to the additional setting of TRFCR_CX when
* in EL2. Otherwise, 0.
+ * @active_config: structure holding current applied configuration parameters.
* @config: structure holding configuration parameters.
* @save_state: State to be preserved across power loss
* @paused: Indicates if the trace unit is paused.
@@ -1089,6 +1090,7 @@ struct etmv4_drvdata {
bool os_unlock : 1;
bool paused : 1;
u64 trfcr;
+ struct etmv4_config active_config;
struct etmv4_config config;
struct etmv4_save_state *save_state;
DECLARE_BITMAP(arch_features, ETM4_IMPDEF_FEATURE_MAX);
--
LEVI:{C3F47F37-75D8-414A-A8BA-3980EC8A46D7}
^ permalink raw reply related
* [PATCH v2 2/5] coresight: etm4x: exclude ss_status from drvdata->config
From: Yeoreum Yun @ 2026-04-10 7:43 UTC (permalink / raw)
To: coresight, linux-arm-kernel, linux-kernel
Cc: suzuki.poulose, mike.leach, james.clark, alexander.shishkin,
leo.yan, Yeoreum Yun
In-Reply-To: <20260410074310.2693385-1-yeoreum.yun@arm.com>
The purpose of TRCSSCSRn register is to show status of
the corresponding Single-shot Comparator Control and input supports.
That means writable field's purpose for reset or restore from idle status
not for configuration.
Therefore, exclude ss_status from drvdata->config, move it to etm4x_caps.
This includes remove TRCSSCRn from configurable item and
remove saving in etm4_disable_hw().
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
---
.../hwtracing/coresight/coresight-etm4x-cfg.c | 1 -
.../hwtracing/coresight/coresight-etm4x-core.c | 18 +++++-------------
.../coresight/coresight-etm4x-sysfs.c | 7 ++-----
drivers/hwtracing/coresight/coresight-etm4x.h | 3 ++-
4 files changed, 9 insertions(+), 20 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-cfg.c b/drivers/hwtracing/coresight/coresight-etm4x-cfg.c
index c302072b293a..d14d7c8a23e5 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-cfg.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-cfg.c
@@ -86,7 +86,6 @@ static int etm4_cfg_map_reg_offset(struct etmv4_drvdata *drvdata,
off_mask = (offset & GENMASK(11, 5));
do {
CHECKREGIDX(TRCSSCCRn(0), ss_ctrl, idx, off_mask);
- CHECKREGIDX(TRCSSCSRn(0), ss_status, idx, off_mask);
CHECKREGIDX(TRCSSPCICRn(0), ss_pe_cmp, idx, off_mask);
} while (0);
} else if ((offset >= TRCCIDCVRn(0)) && (offset <= TRCVMIDCVRn(7))) {
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index 6443f3717b37..b7abb171f523 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -91,7 +91,7 @@ static bool etm4x_sspcicrn_present(struct etmv4_drvdata *drvdata, int n)
const struct etmv4_caps *caps = &drvdata->caps;
return (n < caps->nr_ss_cmp) && caps->nr_pe &&
- (drvdata->config.ss_status[n] & TRCSSCSRn_PC);
+ (caps->ss_status[n] & TRCSSCSRn_PC);
}
u64 etm4x_sysreg_read(u32 offset, bool _relaxed, bool _64bit)
@@ -571,11 +571,9 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
etm4x_relaxed_write32(csa, config->res_ctrl[i], TRCRSCTLRn(i));
for (i = 0; i < caps->nr_ss_cmp; i++) {
- /* always clear status bit on restart if using single-shot */
- if (config->ss_ctrl[i] || config->ss_pe_cmp[i])
- config->ss_status[i] &= ~TRCSSCSRn_STATUS;
etm4x_relaxed_write32(csa, config->ss_ctrl[i], TRCSSCCRn(i));
- etm4x_relaxed_write32(csa, config->ss_status[i], TRCSSCSRn(i));
+ /* always clear status bit on restart if using single-shot */
+ etm4x_relaxed_write32(csa, caps->ss_status[i], TRCSSCSRn(i));
if (etm4x_sspcicrn_present(drvdata, i))
etm4x_relaxed_write32(csa, config->ss_pe_cmp[i], TRCSSPCICRn(i));
}
@@ -1053,12 +1051,6 @@ static void etm4_disable_hw(struct etmv4_drvdata *drvdata)
etm4_disable_trace_unit(drvdata);
- /* read the status of the single shot comparators */
- for (i = 0; i < caps->nr_ss_cmp; i++) {
- config->ss_status[i] =
- etm4x_relaxed_read32(csa, TRCSSCSRn(i));
- }
-
/* read back the current counter values */
for (i = 0; i < caps->nr_cntr; i++) {
config->cntr_val[i] =
@@ -1501,8 +1493,8 @@ static void etm4_init_arch_data(void *info)
*/
caps->nr_ss_cmp = FIELD_GET(TRCIDR4_NUMSSCC_MASK, etmidr4);
for (i = 0; i < caps->nr_ss_cmp; i++) {
- drvdata->config.ss_status[i] =
- etm4x_relaxed_read32(csa, TRCSSCSRn(i));
+ caps->ss_status[i] = etm4x_relaxed_read32(csa, TRCSSCSRn(i));
+ caps->ss_status[i] &= ~(TRCSSCSRn_STATUS | TRCSSCSRn_PENDING);
}
/* NUMCIDC, bits[27:24] number of Context ID comparators for tracing */
caps->numcidc = FIELD_GET(TRCIDR4_NUMCIDC_MASK, etmidr4);
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
index 3d5f343130bd..c794fc9de5b6 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
@@ -1832,8 +1832,6 @@ static ssize_t sshot_ctrl_store(struct device *dev,
raw_spin_lock(&drvdata->spinlock);
idx = config->ss_idx;
config->ss_ctrl[idx] = FIELD_PREP(TRCSSCCRn_SAC_ARC_RST_MASK, val);
- /* must clear bit 31 in related status register on programming */
- config->ss_status[idx] &= ~TRCSSCSRn_STATUS;
raw_spin_unlock(&drvdata->spinlock);
return size;
}
@@ -1844,10 +1842,11 @@ static ssize_t sshot_status_show(struct device *dev,
{
unsigned long val;
struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ const struct etmv4_caps *caps = &drvdata->caps;
struct etmv4_config *config = &drvdata->config;
raw_spin_lock(&drvdata->spinlock);
- val = config->ss_status[config->ss_idx];
+ val = caps->ss_status[config->ss_idx];
raw_spin_unlock(&drvdata->spinlock);
return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
}
@@ -1882,8 +1881,6 @@ static ssize_t sshot_pe_ctrl_store(struct device *dev,
raw_spin_lock(&drvdata->spinlock);
idx = config->ss_idx;
config->ss_pe_cmp[idx] = FIELD_PREP(TRCSSPCICRn_PC_MASK, val);
- /* must clear bit 31 in related status register on programming */
- config->ss_status[idx] &= ~TRCSSCSRn_STATUS;
raw_spin_unlock(&drvdata->spinlock);
return size;
}
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
index 3e20561672dc..57508d301327 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.h
+++ b/drivers/hwtracing/coresight/coresight-etm4x.h
@@ -213,6 +213,7 @@
#define TRCACATRn_EXLEVEL_MASK GENMASK(14, 8)
#define TRCSSCSRn_STATUS BIT(31)
+#define TRCSSCSRn_PENDING BIT(30)
#define TRCSSCCRn_SAC_ARC_RST_MASK GENMASK(24, 0)
#define TRCSSPCICRn_PC_MASK GENMASK(7, 0)
@@ -898,6 +899,7 @@ struct etmv4_caps {
bool atbtrig : 1;
bool lpoverride : 1;
bool skip_power_up : 1;
+ u32 ss_status[ETM_MAX_SS_CMP];
};
/**
@@ -976,7 +978,6 @@ struct etmv4_config {
u32 res_ctrl[ETM_MAX_RES_SEL]; /* TRCRSCTLRn */
u8 ss_idx;
u32 ss_ctrl[ETM_MAX_SS_CMP];
- u32 ss_status[ETM_MAX_SS_CMP];
u32 ss_pe_cmp[ETM_MAX_SS_CMP];
u8 addr_idx;
u64 addr_val[ETM_MAX_SINGLE_ADDR_CMP];
--
LEVI:{C3F47F37-75D8-414A-A8BA-3980EC8A46D7}
^ permalink raw reply related
* [PATCH v2 0/5] fix inconsistencies with sysfs configuration in etmX
From: Yeoreum Yun @ 2026-04-10 7:43 UTC (permalink / raw)
To: coresight, linux-arm-kernel, linux-kernel
Cc: suzuki.poulose, mike.leach, james.clark, alexander.shishkin,
leo.yan, Yeoreum Yun
The current ETMx configuration via sysfs can lead to the following
inconsistencies:
- If a configuration is modified via sysfs while a perf session is
active, the running configuration may differ between before
a sched-out and after a subsequent sched-in.
- If a perf session and sysfs session tries to enable concurrently,
configuration from configfs could be corrupted (etm4).
- There is chance to corrupt drvdata->config if perf session tries
to enabled among handling cscfg_csdev_disable_active_config()
in etm4_disable_sysfs() (etm4).
To resolve these inconsistencies, the configuration should be separated into:
- active_config, which is applied configuration for the current session
- config, which stores the settings configured via sysfs.
and apply configuration from configfs after taking a mode.
This patch based on v7.0-rc7
Patch History
=============
from v1 to v2
- rebased to v7.0-rc7.
- introduce etmX_caps structure to save etmX's capabilities.
- remove ss_status from etmv4_config.
- modify active_config after taking a mode (perf/sysfs).
- https://lore.kernel.org/all/20260317181705.2456271-1-yeoreum.yun@arm.com/
Yeoreum Yun (5):
coresight: etm4x: introduce struct etm4_caps
coresight: etm4x: exclude ss_status from drvdata->config
coresight: etm4x: fix inconsistencies with sysfs configration
coresight: etm3x: introduce struct etm_caps
coresight: etm3x: fix inconsistencies with sysfs configration
drivers/hwtracing/coresight/coresight-etm.h | 42 ++-
.../coresight/coresight-etm3x-core.c | 53 +--
.../coresight/coresight-etm3x-sysfs.c | 14 +-
.../hwtracing/coresight/coresight-etm4x-cfg.c | 3 +-
.../coresight/coresight-etm4x-core.c | 322 ++++++++++--------
.../coresight/coresight-etm4x-sysfs.c | 192 ++++++-----
drivers/hwtracing/coresight/coresight-etm4x.h | 180 +++++-----
7 files changed, 450 insertions(+), 356 deletions(-)
base-commit: 591cd656a1bf5ea94a222af5ef2ee76df029c1d2
--
LEVI:{C3F47F37-75D8-414A-A8BA-3980EC8A46D7}
^ permalink raw reply
* Re: [PATCH v13 11/17] drm/bridge: analogix_dp: Apply drm_bridge_connector helper
From: Luca Ceresoli @ 2026-04-10 7:41 UTC (permalink / raw)
To: Damon Ding, andrzej.hajda, neil.armstrong, rfoss,
maarten.lankhorst, mripard, tzimmermann, airlied, simona,
victor.liu, Frank.Li, shawnguo, s.hauer, inki.dae, sw0312.kim,
kyungmin.park, krzk, jingoohan1, p.zabel, hjc, heiko, andy.yan
Cc: Laurent.pinchart, jonas, jernej.skrabec, kernel, festevam,
alim.akhtar, dmitry.baryshkov, nicolas.frattaroli, dianders,
m.szyprowski, linux-kernel, dri-devel, imx, linux-arm-kernel,
linux-samsung-soc, linux-rockchip
In-Reply-To: <20260409065301.446670-12-damon.ding@rock-chips.com>
Hello Damon,
On Thu Apr 9, 2026 at 8:52 AM CEST, Damon Ding wrote:
> Initialize bridge_connector for both Rockchip and Exynos encoder sides.
> Then, make DRM_BRIDGE_ATTACH_NO_CONNECTOR mandatory for Analogix bridge
> side, as the private &drm_connector is no longer created.
>
> The previous &drm_connector_funcs and &drm_connector_helper_funcs APIs
> are replaced by the corresponding &drm_bridge_funcs APIs:
>
> analogix_dp_atomic_check() -> analogix_dp_bridge_atomic_check()
> analogix_dp_detect() -> analogix_dp_bridge_detect()
> analogix_dp_get_modes() -> analogix_dp_bridge_get_modes()
> analogix_dp_bridge_edid_read()
>
> Additionally, the compatibilities of Analogix DP bridge based on whether
> the next bridge is a 'panel'. If it is, OP_MODES and OP_DETECT are
> supported; If not (the next bridge is a 'monitor' or a bridge chip),
> OP_EDID and OP_DETECT are supported.
>
> The devm_drm_bridge_add() is placed in analogix_dp_bind() instead of
> analogix_dp_probe(), because the type of next bridge (the panel, monitor
> or bridge chip) can only be determined after the probe process has fully
> completed.
>
> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
I noticed two issues, sorry I haven't catched them before...
> @@ -1580,7 +1533,8 @@ EXPORT_SYMBOL_GPL(analogix_dp_unbind);
>
> int analogix_dp_start_crc(struct drm_connector *connector)
> {
> - struct analogix_dp_device *dp = to_dp(connector);
> + struct analogix_dp_device *dp;
> + struct drm_bridge *bridge;
>
> if (!connector->state->crtc) {
> DRM_ERROR("Connector %s doesn't currently have a CRTC.\n",
> @@ -1588,13 +1542,26 @@ int analogix_dp_start_crc(struct drm_connector *connector)
> return -EINVAL;
> }
>
> + bridge = drm_bridge_chain_get_first_bridge(connector->encoder);
> + if (bridge->type != DRM_MODE_CONNECTOR_eDP)
> + return -EINVAL;
> +
> + dp = to_dp(bridge);
> +
> return drm_dp_start_crc(&dp->aux, connector->state->crtc);
> }
drm_bridge_chain_get_first_bridge() takes a reference, you must call
drm_bridge_put(bridge) before returning. Given there are two return paths I
suggest:
- struct drm_bridge *bridge;
- bridge = drm_bridge_chain_get_first_bridge(connector->encoder);
+ struct drm_bridge *bridge __free(drm_bridge_put) =
+ drm_bridge_chain_get_first_bridge(connector->encoder);
> EXPORT_SYMBOL_GPL(analogix_dp_start_crc);
>
> int analogix_dp_stop_crc(struct drm_connector *connector)
> {
> - struct analogix_dp_device *dp = to_dp(connector);
> + struct analogix_dp_device *dp;
> + struct drm_bridge *bridge;
> +
> + bridge = drm_bridge_chain_get_first_bridge(connector->encoder);
> + if (bridge->type != DRM_MODE_CONNECTOR_eDP)
> + return -EINVAL;
> +
> + dp = to_dp(bridge);
>
> return drm_dp_stop_crc(&dp->aux);
> }
Same here:
- struct drm_bridge *bridge;
- bridge = drm_bridge_chain_get_first_bridge(connector->encoder);
+ struct drm_bridge *bridge __free(drm-bridge_put) =
+ drm_bridge_chain_get_first_bridge(connector->encoder);
With the above two changes you can add to v14:
+Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Luca
--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox