* [PATCH] net: airoha: Fix typos in comments and Kconfig
From: Wayen.Yan @ 2026-06-13 0:41 UTC (permalink / raw)
To: netdev
Cc: lorenzo, horms, pabeni, kuba, edumazet, andrew+netdev,
angelogioacchino.delregno, matthias.bgg, linux-arm-kernel,
linux-mediatek
Fix several typos found during code review:
- Kconfig: "Aiorha" -> "Airoha" in NET_AIROHA_FLOW_STATS help text
- Comment: "CMD1" -> "CDM1" (Central DMA, not Command)
- Comments: "GMD1/2/3/4" -> "GDM1/2/3/4" (Gigabit DMA, not GMD)
These are pure comment and documentation fixes with no functional impact.
Fixes: 23020f049327 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Wayen.Yan <win847@gmail.com>
---
drivers/net/ethernet/airoha/Kconfig | 2 +-
drivers/net/ethernet/airoha/airoha_eth.c | 10 +++++-----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/airoha/Kconfig b/drivers/net/ethernet/airoha/Kconfig
index ad3ce50..1f6640a 100644
--- a/drivers/net/ethernet/airoha/Kconfig
+++ b/drivers/net/ethernet/airoha/Kconfig
@@ -29,6 +29,6 @@ config NET_AIROHA_FLOW_STATS
bool "Airoha flow stats"
depends on NET_AIROHA && NET_AIROHA_NPU
help
- Enable Aiorha flowtable statistic counters.
+ Enable Airoha flowtable statistic counters.
endif #NET_VENDOR_AIROHA
diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c
index 31cdb11..9d9d34a 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.c
+++ b/drivers/net/ethernet/airoha/airoha_eth.c
@@ -294,18 +294,18 @@ static void airoha_fe_pse_ports_init(struct airoha_eth *eth)
FIELD_PREP(PSE_ALLRSV_MASK, all_rsv));
}
- /* CMD1 */
+ /* CDM1 */
for (q = 0; q < pse_port_num_queues[FE_PSE_PORT_CDM1]; q++)
airoha_fe_set_pse_oq_rsv(eth, FE_PSE_PORT_CDM1, q,
PSE_QUEUE_RSV_PAGES);
- /* GMD1 */
+ /* GDM1 */
for (q = 0; q < pse_port_num_queues[FE_PSE_PORT_GDM1]; q++)
airoha_fe_set_pse_oq_rsv(eth, FE_PSE_PORT_GDM1, q,
PSE_QUEUE_RSV_PAGES);
- /* GMD2 */
+ /* GDM2 */
for (q = 6; q < pse_port_num_queues[FE_PSE_PORT_GDM2]; q++)
airoha_fe_set_pse_oq_rsv(eth, FE_PSE_PORT_GDM2, q, 0);
- /* GMD3 */
+ /* GDM3 */
for (q = 0; q < pse_port_num_queues[FE_PSE_PORT_GDM3]; q++)
airoha_fe_set_pse_oq_rsv(eth, FE_PSE_PORT_GDM3, q,
PSE_QUEUE_RSV_PAGES);
@@ -340,7 +340,7 @@ static void airoha_fe_pse_ports_init(struct airoha_eth *eth)
q, 0);
}
}
- /* GMD4 */
+ /* GDM4 */
for (q = 0; q < pse_port_num_queues[FE_PSE_PORT_GDM4]; q++)
airoha_fe_set_pse_oq_rsv(eth, FE_PSE_PORT_GDM4, q,
PSE_QUEUE_RSV_PAGES);
--
2.51.0
^ permalink raw reply related
* [PATCH 0/2] iio: adc: Initialize completions before requesting IRQs
From: Maxwell Doose @ 2026-06-13 0:58 UTC (permalink / raw)
To: Jonathan Cameron, David Lechner, Nuno Sá, Andy Shevchenko,
Vladimir Zapolskiy, Piotr Wojtaszczyk, Hartmut Knaack,
open list:IIO SUBSYSTEM AND DRIVERS,
moderated list:ARM/LPC32XX SOC SUPPORT, open list
Cc: Sangyun Kim, Kyungwook Boo, Jaeyoung Chung
Hi all,
This short patch series fixes the issues raised by Jaeyoung Chung,
Sangyun Kim, and Kyungwook Boo regarding init_completion() and spurious
IRQs. The report is linked below [1], but I will also put it here
inline:
"lpc32xx_adc_probe() in drivers/iio/adc/lpc32xx_adc.c and
spear_adc_probe() in drivers/iio/adc/spear_adc.c register their
interrupt handler with devm_request_irq() before they initialize
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in lpc32xx_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
spear_adc_probe() has the same ordering: devm_request_irq() for
spear_adc_isr() before init_completion(&st->completion).
Both interrupt handlers, lpc32xx_adc_isr() and spear_adc_isr(), call
complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access.
Suggested fix: move init_completion(&st->completion) above
devm_request_irq(), so the completion is valid before the handler can run.
Reported-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Reported-by: Kyungwook Boo <bookyungwook@gmail.com>"
+ Reported-by: Jaeyoung Chung <jjy600901@snu.ac.kr>
Quick note, I ended up editing the report a little in the individual
commits to match the driver we were fixing.
[1] Link: https://lore.kernel.org/linux-iio/20260610115700.774689-1-jjy600901@snu.ac.kr/
Maxwell Doose (2):
iio: adc: lpc32xx: Initialize completion before requesting IRQ
iio: adc: spear: Initialize completion before requesting IRQ
drivers/iio/adc/lpc32xx_adc.c | 4 ++--
drivers/iio/adc/spear_adc.c | 3 +--
2 files changed, 3 insertions(+), 4 deletions(-)
--
2.54.0
^ permalink raw reply
* [PATCH 1/2] iio: adc: lpc32xx: Initialize completion before requesting IRQ
From: Maxwell Doose @ 2026-06-13 0:58 UTC (permalink / raw)
To: Jonathan Cameron, David Lechner, Nuno Sá, Andy Shevchenko,
Vladimir Zapolskiy, Piotr Wojtaszczyk, Hartmut Knaack,
open list:IIO SUBSYSTEM AND DRIVERS,
moderated list:ARM/LPC32XX SOC SUPPORT, open list
Cc: Sangyun Kim, Kyungwook Boo, Jaeyoung Chung
In-Reply-To: <20260613005812.160572-1-m32285159@gmail.com>
In the report from Jaeyoung Chung:
"lpc32xx_adc_probe() in drivers/iio/adc/lpc32xx_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in lpc32xx_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
lpc32xx_adc_isr() calls complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."
Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq().
Fixes: 7901b2a1453e ("staging:iio:adc:lpc32xx rename local state structure to _state")
Reported-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Reported-by: Kyungwook Boo <bookyungwook@gmail.com>
Reported-by: Jaeyoung Chung <jjy600901@snu.ac.kr>
Closes: https://lore.kernel.org/linux-iio/20260610115700.774689-1-jjy600901@snu.ac.kr/
Signed-off-by: Maxwell Doose <m32285159@gmail.com>
---
drivers/iio/adc/lpc32xx_adc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/lpc32xx_adc.c b/drivers/iio/adc/lpc32xx_adc.c
index 43a7bc8158b5..db3a602327ff 100644
--- a/drivers/iio/adc/lpc32xx_adc.c
+++ b/drivers/iio/adc/lpc32xx_adc.c
@@ -179,6 +179,8 @@ static int lpc32xx_adc_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
+ init_completion(&st->completion);
+
retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0,
LPC32XXAD_NAME, st);
if (retval < 0) {
@@ -197,8 +199,6 @@ static int lpc32xx_adc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, iodev);
- init_completion(&st->completion);
-
iodev->name = LPC32XXAD_NAME;
iodev->info = &lpc32xx_adc_iio_info;
iodev->modes = INDIO_DIRECT_MODE;
--
2.54.0
^ permalink raw reply related
* [PATCH 2/2] iio: adc: spear: Initialize completion before requesting IRQ
From: Maxwell Doose @ 2026-06-13 0:58 UTC (permalink / raw)
To: Jonathan Cameron, David Lechner, Nuno Sá, Andy Shevchenko,
Vladimir Zapolskiy, Piotr Wojtaszczyk, Hartmut Knaack,
open list:IIO SUBSYSTEM AND DRIVERS,
moderated list:ARM/LPC32XX SOC SUPPORT, open list
Cc: Sangyun Kim, Kyungwook Boo, Jaeyoung Chung
In-Reply-To: <20260613005812.160572-1-m32285159@gmail.com>
In the report from Jaeyoung Chung:
"spear_adc_probe() in drivers/iio/adc/spear_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in spear_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, spear_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
spear_adc_isr() calls complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."
Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq().
Fixes: b586e5d9eee0 ("staging:iio:adc:spear rename device specific state structure to _state")
Reported-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Reported-by: Kyungwook Boo <bookyungwook@gmail.com>
Reported-by: Jaeyoung Chung <jjy600901@snu.ac.kr>
Closes: https://lore.kernel.org/linux-iio/20260610115700.774689-1-jjy600901@snu.ac.kr/
Signed-off-by: Maxwell Doose <m32285159@gmail.com>
---
drivers/iio/adc/spear_adc.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/iio/adc/spear_adc.c b/drivers/iio/adc/spear_adc.c
index 4be722406bb5..ab02a14682ed 100644
--- a/drivers/iio/adc/spear_adc.c
+++ b/drivers/iio/adc/spear_adc.c
@@ -283,6 +283,7 @@ static int spear_adc_probe(struct platform_device *pdev)
st = iio_priv(indio_dev);
st->dev = dev;
+ init_completion(&st->completion);
mutex_init(&st->lock);
/*
@@ -329,8 +330,6 @@ static int spear_adc_probe(struct platform_device *pdev)
spear_adc_configure(st);
- init_completion(&st->completion);
-
indio_dev->name = SPEAR_ADC_MOD_NAME;
indio_dev->info = &spear_adc_info;
indio_dev->modes = INDIO_DIRECT_MODE;
--
2.54.0
^ permalink raw reply related
* [PATCH net-next v2 0/8] net: dsa: mt7530: modernise register access and add two DSA ops
From: Daniel Golle @ 2026-06-13 1:10 UTC (permalink / raw)
To: Chester A. Unal, Daniel Golle, Andrew Lunn, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Matthias Brugger, AngeloGioacchino Del Regno, Russell King,
netdev, linux-kernel, linux-arm-kernel, linux-mediatek
The mt7530 driver carries its own register accessors that predate the
regmap conversion and now largely duplicate what regmap already
provides, including locking. Most of this series removes that layer.
It first moves the MDIO bus locking into the switch regmap via
.lock/.unlock callbacks, matching the PCS regmaps, so any path reaching
the regmap is serialised automatically. With the wrappers no longer
adding locking, the thin mt7530_mii_* indirection is folded away and the
remaining accessors are replaced mechanically with the plain regmap API,
using the coccinelle semantic patches included in the commit messages.
Open-coded register fields are then converted to FIELD_GET/FIELD_PREP.
None of this is intended to change behaviour.
The last two patches implement .port_fast_age, which flushes dynamically
learned MAC entries on topology changes, and .port_change_conduit, which
moves a user port's CPU-port affinity at runtime.
---
v2:
* fix stray 'static void' left-over in 4/8 which had a fix accidentally
folded into 5/8 (byte-identical state at 8/8, but bisectability is
restored)
* extend port_change_conduit op commit message
Daniel Golle (8):
net: dsa: mt7530: move MDIO bus locking into regmap
net: dsa: mt7530: fold mt7530_mii_write/read into mt7530_write/read
net: dsa: mt7530: replace mt7530_write with regmap_write
net: dsa: mt7530: replace mt7530_rmw/set/clear with regmap API
net: dsa: mt7530: replace mt7530_read with regmap_read
net: dsa: mt7530: convert to use field accessor macros
net: dsa: mt7530: implement port_fast_age
net: dsa: mt7530: implement port_change_conduit op
drivers/net/dsa/mt7530-mdio.c | 9 +-
drivers/net/dsa/mt7530.c | 791 +++++++++++++++++-----------------
drivers/net/dsa/mt7530.h | 209 +++++----
3 files changed, 517 insertions(+), 492 deletions(-)
--
2.54.0
^ permalink raw reply
* [PATCH net-next v2 1/8] net: dsa: mt7530: move MDIO bus locking into regmap
From: Daniel Golle @ 2026-06-13 1:10 UTC (permalink / raw)
To: Chester A. Unal, Daniel Golle, Andrew Lunn, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Matthias Brugger, AngeloGioacchino Del Regno, Russell King,
netdev, linux-kernel, linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1781312667.git.daniel@makrotopia.org>
The switch register regmap was created with .disable_locking = true,
relying on callers to manually lock the MDIO bus. Move the locking
into the regmap using .lock/.unlock callbacks, matching the PCS
regmaps that already do this. This allows any code path reaching the
regmap to be automatically protected.
With regmap handling bus locking, the manual mt7530_mutex_lock/unlock
wrappers in mt7530_write(), _mt7530_read(), mt7530_rmw() and
mt7530_port_change_mtu() become redundant and are removed.
The MT7531 indirect PHY access functions need serialization of their
multi-step register sequences, but no longer need to hold bus->mdio_lock
across the whole operation. Switch them to reg_mutex.
core_write()/core_rmw() are the only remaining callers of
mt7530_mutex_lock(). They access TRGMII core PHY registers via the
clause 22 MMD indirect protocol -- a separate register space that
bypasses regmap and needs manual bus->mdio_lock protection.
Generated using the following semantic patch:
// Remove mt7530_mutex_lock/unlock around single regmap-based calls.
@@
expression priv, reg, val;
@@
{
- mt7530_mutex_lock(priv);
-
mt7530_mii_write(priv, reg, val);
-
- mt7530_mutex_unlock(priv);
}
@@
expression priv, reg, mask, set;
@@
{
- mt7530_mutex_lock(priv);
-
regmap_update_bits(priv->regmap, reg, mask, set);
-
- mt7530_mutex_unlock(priv);
}
@@
expression p;
identifier val;
@@
{
- u32 val;
- mt7530_mutex_lock(p->priv);
- val = mt7530_mii_read(p->priv, p->reg);
- mt7530_mutex_unlock(p->priv);
- return val;
+ return mt7530_mii_read(p->priv, p->reg);
}
@@
expression priv;
@@
- mt7530_mutex_lock(priv);
val = mt7530_mii_read(priv, MT7530_GMACCR);
...
mt7530_mii_write(priv, MT7530_GMACCR, val);
- mt7530_mutex_unlock(priv);
@@
expression priv, port;
@@
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
- mt7530_mutex_lock(priv);
+ mutex_lock(&priv->reg_mutex);
@@
expression priv;
@@
out:
- mt7530_mutex_unlock(priv);
+ mutex_unlock(&priv->reg_mutex);
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: no changes
drivers/net/dsa/mt7530-mdio.c | 9 ++++++---
drivers/net/dsa/mt7530.c | 38 +++++++++--------------------------
2 files changed, 15 insertions(+), 32 deletions(-)
diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c
index 11ea924a9f35..f7c8eeb27211 100644
--- a/drivers/net/dsa/mt7530-mdio.c
+++ b/drivers/net/dsa/mt7530-mdio.c
@@ -141,12 +141,14 @@ static const struct regmap_config regmap_config = {
.val_bits = 32,
.reg_stride = 4,
.max_register = MT7530_CREV,
- .disable_locking = true,
+ .lock = mt7530_mdio_regmap_lock,
+ .unlock = mt7530_mdio_regmap_unlock,
};
static int
mt7530_probe(struct mdio_device *mdiodev)
{
+ struct regmap_config rc = regmap_config;
struct mt7530_priv *priv;
struct device_node *dn;
int ret;
@@ -200,8 +202,9 @@ mt7530_probe(struct mdio_device *mdiodev)
return PTR_ERR(priv->io_pwr);
}
- priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, priv,
- ®map_config);
+ rc.lock_arg = &priv->bus->mdio_lock;
+ priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
+ priv, &rc);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 3c2a3029b10c..5f56a423b147 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -184,11 +184,7 @@ mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
static void
mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val)
{
- mt7530_mutex_lock(priv);
-
mt7530_mii_write(priv, reg, val);
-
- mt7530_mutex_unlock(priv);
}
static u32
@@ -200,15 +196,7 @@ _mt7530_unlocked_read(struct mt7530_dummy_poll *p)
static u32
_mt7530_read(struct mt7530_dummy_poll *p)
{
- u32 val;
-
- mt7530_mutex_lock(p->priv);
-
- val = mt7530_mii_read(p->priv, p->reg);
-
- mt7530_mutex_unlock(p->priv);
-
- return val;
+ return mt7530_mii_read(p->priv, p->reg);
}
static u32
@@ -224,11 +212,7 @@ static void
mt7530_rmw(struct mt7530_priv *priv, u32 reg,
u32 mask, u32 set)
{
- mt7530_mutex_lock(priv);
-
regmap_update_bits(priv->regmap, reg, mask, set);
-
- mt7530_mutex_unlock(priv);
}
static void
@@ -555,7 +539,7 @@ mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
- mt7530_mutex_lock(priv);
+ mutex_lock(&priv->reg_mutex);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
@@ -588,7 +572,7 @@ mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
ret = val & MT7531_MDIO_RW_DATA_MASK;
out:
- mt7530_mutex_unlock(priv);
+ mutex_unlock(&priv->reg_mutex);
return ret;
}
@@ -603,7 +587,7 @@ mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
- mt7530_mutex_lock(priv);
+ mutex_lock(&priv->reg_mutex);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
@@ -635,7 +619,7 @@ mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
}
out:
- mt7530_mutex_unlock(priv);
+ mutex_unlock(&priv->reg_mutex);
return ret;
}
@@ -649,7 +633,7 @@ mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum)
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
- mt7530_mutex_lock(priv);
+ mutex_lock(&priv->reg_mutex);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
@@ -672,7 +656,7 @@ mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum)
ret = val & MT7531_MDIO_RW_DATA_MASK;
out:
- mt7530_mutex_unlock(priv);
+ mutex_unlock(&priv->reg_mutex);
return ret;
}
@@ -687,7 +671,7 @@ mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
- mt7530_mutex_lock(priv);
+ mutex_lock(&priv->reg_mutex);
ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg,
!(reg & MT7531_PHY_ACS_ST), 20, 100000);
@@ -709,7 +693,7 @@ mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
}
out:
- mt7530_mutex_unlock(priv);
+ mutex_unlock(&priv->reg_mutex);
return ret;
}
@@ -1444,8 +1428,6 @@ mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
if (!dsa_is_cpu_port(ds, port))
return 0;
- mt7530_mutex_lock(priv);
-
val = mt7530_mii_read(priv, MT7530_GMACCR);
val &= ~MAX_RX_PKT_LEN_MASK;
@@ -1465,8 +1447,6 @@ mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
mt7530_mii_write(priv, MT7530_GMACCR, val);
- mt7530_mutex_unlock(priv);
-
return 0;
}
--
2.54.0
^ permalink raw reply related
* [PATCH net-next v2 2/8] net: dsa: mt7530: fold mt7530_mii_write/read into mt7530_write/read
From: Daniel Golle @ 2026-06-13 1:11 UTC (permalink / raw)
To: Chester A. Unal, Daniel Golle, Andrew Lunn, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Matthias Brugger, AngeloGioacchino Del Regno, Russell King,
netdev, linux-kernel, linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1781312667.git.daniel@makrotopia.org>
With the lock wrappers removed in the previous commit, mt7530_write()
was a trivial wrapper around mt7530_mii_write(), and mt7530_read()
around mt7530_mii_read() via _mt7530_read(). Fold the function bodies
and eliminate the intermediate functions.
The _mt7530_unlocked_read() and _mt7530_read() poll helpers, which
existed as locked/unlocked variants for readx_poll_timeout(), are
consolidated into a single mt7530_mii_poll() that calls mt7530_read().
Callers are updated using the following semantic patch:
@@
expression E1, E2, E3;
@@
-mt7530_mii_write(E1, E2, E3)
+mt7530_write(E1, E2, E3)
@@
expression E1, E2;
@@
-mt7530_mii_read(E1, E2)
+mt7530_read(E1, E2)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: no changes
drivers/net/dsa/mt7530.c | 78 ++++++++++++++--------------------------
1 file changed, 27 insertions(+), 51 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 5f56a423b147..9ccc848195cf 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -150,22 +150,19 @@ core_clear(struct mt7530_priv *priv, u32 reg, u32 val)
core_rmw(priv, reg, val, 0);
}
-static int
-mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
+static void
+mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val)
{
int ret;
ret = regmap_write(priv->regmap, reg, val);
-
if (ret < 0)
dev_err(priv->dev,
"failed to write mt7530 register\n");
-
- return ret;
}
static u32
-mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
+mt7530_read(struct mt7530_priv *priv, u32 reg)
{
int ret;
u32 val;
@@ -181,31 +178,10 @@ mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
return val;
}
-static void
-mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val)
-{
- mt7530_mii_write(priv, reg, val);
-}
-
static u32
-_mt7530_unlocked_read(struct mt7530_dummy_poll *p)
+mt7530_mii_poll(struct mt7530_dummy_poll *p)
{
- return mt7530_mii_read(p->priv, p->reg);
-}
-
-static u32
-_mt7530_read(struct mt7530_dummy_poll *p)
-{
- return mt7530_mii_read(p->priv, p->reg);
-}
-
-static u32
-mt7530_read(struct mt7530_priv *priv, u32 reg)
-{
- struct mt7530_dummy_poll p;
-
- INIT_MT7530_DUMMY_POLL(&p, priv, reg);
- return _mt7530_read(&p);
+ return mt7530_read(p->priv, p->reg);
}
static void
@@ -239,7 +215,7 @@ mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp)
mt7530_write(priv, MT7530_ATC, val);
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_ATC);
- ret = readx_poll_timeout(_mt7530_read, &p, val,
+ ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & ATC_BUSY), 20, 20000);
if (ret < 0) {
dev_err(priv->dev, "reset timeout\n");
@@ -541,7 +517,7 @@ mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
mutex_lock(&priv->reg_mutex);
- ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
+ ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
@@ -550,9 +526,9 @@ mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_DEV_ADDR(devad) | regnum;
- mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
+ mt7530_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
- ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
+ ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
@@ -561,9 +537,9 @@ mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
reg = MT7531_MDIO_CL45_READ | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_DEV_ADDR(devad);
- mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
+ mt7530_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
- ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
+ ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
@@ -589,7 +565,7 @@ mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
mutex_lock(&priv->reg_mutex);
- ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
+ ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
@@ -598,9 +574,9 @@ mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_DEV_ADDR(devad) | regnum;
- mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
+ mt7530_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
- ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
+ ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
@@ -609,9 +585,9 @@ mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
reg = MT7531_MDIO_CL45_WRITE | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_DEV_ADDR(devad) | data;
- mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
+ mt7530_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
- ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
+ ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
@@ -635,7 +611,7 @@ mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum)
mutex_lock(&priv->reg_mutex);
- ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
+ ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
@@ -645,9 +621,9 @@ mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum)
val = MT7531_MDIO_CL22_READ | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_REG_ADDR(regnum);
- mt7530_mii_write(priv, MT7531_PHY_IAC, val | MT7531_PHY_ACS_ST);
+ mt7530_write(priv, MT7531_PHY_IAC, val | MT7531_PHY_ACS_ST);
- ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
+ ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
@@ -673,7 +649,7 @@ mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
mutex_lock(&priv->reg_mutex);
- ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg,
+ ret = readx_poll_timeout(mt7530_mii_poll, &p, reg,
!(reg & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
@@ -683,9 +659,9 @@ mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
reg = MT7531_MDIO_CL22_WRITE | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_REG_ADDR(regnum) | data;
- mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
+ mt7530_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
- ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg,
+ ret = readx_poll_timeout(mt7530_mii_poll, &p, reg,
!(reg & MT7531_PHY_ACS_ST), 20, 100000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
@@ -1428,7 +1404,7 @@ mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
if (!dsa_is_cpu_port(ds, port))
return 0;
- val = mt7530_mii_read(priv, MT7530_GMACCR);
+ val = mt7530_read(priv, MT7530_GMACCR);
val &= ~MAX_RX_PKT_LEN_MASK;
/* RX length also includes Ethernet header, MTK tag, and FCS length */
@@ -1445,7 +1421,7 @@ mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
val |= MAX_RX_PKT_LEN_JUMBO;
}
- mt7530_mii_write(priv, MT7530_GMACCR, val);
+ mt7530_write(priv, MT7530_GMACCR, val);
return 0;
}
@@ -1614,7 +1590,7 @@ mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid)
mt7530_write(priv, MT7530_VTCR, val);
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_VTCR);
- ret = readx_poll_timeout(_mt7530_read, &p, val,
+ ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & VTCR_BUSY), 20, 20000);
if (ret < 0) {
dev_err(priv->dev, "poll timeout\n");
@@ -2465,7 +2441,7 @@ mt7530_setup(struct dsa_switch *ds)
/* Waiting for MT7530 got to stable */
INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP);
- ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
+ ret = readx_poll_timeout(mt7530_mii_poll, &p, val, val != 0,
20, 1000000);
if (ret < 0) {
dev_err(priv->dev, "reset timeout\n");
@@ -2706,7 +2682,7 @@ mt7531_setup(struct dsa_switch *ds)
/* Waiting for MT7530 got to stable */
INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP);
- ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
+ ret = readx_poll_timeout(mt7530_mii_poll, &p, val, val != 0,
20, 1000000);
if (ret < 0) {
dev_err(priv->dev, "reset timeout\n");
--
2.54.0
^ permalink raw reply related
* [PATCH net-next v2 3/8] net: dsa: mt7530: replace mt7530_write with regmap_write
From: Daniel Golle @ 2026-06-13 1:11 UTC (permalink / raw)
To: Chester A. Unal, Daniel Golle, Andrew Lunn, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Matthias Brugger, AngeloGioacchino Del Regno, Russell King,
netdev, linux-kernel, linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1781312667.git.daniel@makrotopia.org>
Replace all mt7530_write() calls with direct regmap_write() calls
and remove the wrapper function. The per-call error logging is
dropped -- regmap has its own tracing infrastructure.
Generated using the following semantic patch:
@@
expression priv, reg, val;
@@
-mt7530_write(priv, reg, val)
+regmap_write(priv->regmap, reg, val)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: no changes
drivers/net/dsa/mt7530.c | 126 ++++++++++++++++++---------------------
1 file changed, 59 insertions(+), 67 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 9ccc848195cf..ce4efcf1b3e6 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -150,16 +150,6 @@ core_clear(struct mt7530_priv *priv, u32 reg, u32 val)
core_rmw(priv, reg, val, 0);
}
-static void
-mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val)
-{
- int ret;
-
- ret = regmap_write(priv->regmap, reg, val);
- if (ret < 0)
- dev_err(priv->dev,
- "failed to write mt7530 register\n");
-}
static u32
mt7530_read(struct mt7530_priv *priv, u32 reg)
@@ -212,7 +202,7 @@ mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp)
/* Set the command operating upon the MAC address entries */
val = ATC_BUSY | ATC_MAT(0) | cmd;
- mt7530_write(priv, MT7530_ATC, val);
+ regmap_write(priv->regmap, MT7530_ATC, val);
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_ATC);
ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
@@ -288,7 +278,7 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
/* Write array into the ARL table */
for (i = 0; i < 3; i++)
- mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]);
+ regmap_write(priv->regmap, MT7530_ATA1 + (i * 4), reg[i]);
}
/* Set up switch core clock for MT7530 */
@@ -406,27 +396,27 @@ mt7531_pll_setup(struct mt7530_priv *priv)
/* Step 1 : Disable MT7531 COREPLL */
val = mt7530_read(priv, MT7531_PLLGP_EN);
val &= ~EN_COREPLL;
- mt7530_write(priv, MT7531_PLLGP_EN, val);
+ regmap_write(priv->regmap, MT7531_PLLGP_EN, val);
/* Step 2: switch to XTAL output */
val = mt7530_read(priv, MT7531_PLLGP_EN);
val |= SW_CLKSW;
- mt7530_write(priv, MT7531_PLLGP_EN, val);
+ regmap_write(priv->regmap, MT7531_PLLGP_EN, val);
val = mt7530_read(priv, MT7531_PLLGP_CR0);
val &= ~RG_COREPLL_EN;
- mt7530_write(priv, MT7531_PLLGP_CR0, val);
+ regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
/* Step 3: disable PLLGP and enable program PLLGP */
val = mt7530_read(priv, MT7531_PLLGP_EN);
val |= SW_PLLGP;
- mt7530_write(priv, MT7531_PLLGP_EN, val);
+ regmap_write(priv->regmap, MT7531_PLLGP_EN, val);
/* Step 4: program COREPLL output frequency to 500MHz */
val = mt7530_read(priv, MT7531_PLLGP_CR0);
val &= ~RG_COREPLL_POSDIV_M;
val |= 2 << RG_COREPLL_POSDIV_S;
- mt7530_write(priv, MT7531_PLLGP_CR0, val);
+ regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
usleep_range(25, 35);
switch (xtal) {
@@ -434,42 +424,42 @@ mt7531_pll_setup(struct mt7530_priv *priv)
val = mt7530_read(priv, MT7531_PLLGP_CR0);
val &= ~RG_COREPLL_SDM_PCW_M;
val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
- mt7530_write(priv, MT7531_PLLGP_CR0, val);
+ regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
break;
case MT7531_XTAL_FSEL_40MHZ:
val = mt7530_read(priv, MT7531_PLLGP_CR0);
val &= ~RG_COREPLL_SDM_PCW_M;
val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
- mt7530_write(priv, MT7531_PLLGP_CR0, val);
+ regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
break;
}
/* Set feedback divide ratio update signal to high */
val = mt7530_read(priv, MT7531_PLLGP_CR0);
val |= RG_COREPLL_SDM_PCW_CHG;
- mt7530_write(priv, MT7531_PLLGP_CR0, val);
+ regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
/* Wait for at least 16 XTAL clocks */
usleep_range(10, 20);
/* Step 5: set feedback divide ratio update signal to low */
val = mt7530_read(priv, MT7531_PLLGP_CR0);
val &= ~RG_COREPLL_SDM_PCW_CHG;
- mt7530_write(priv, MT7531_PLLGP_CR0, val);
+ regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
/* Enable 325M clock for SGMII */
- mt7530_write(priv, MT7531_ANA_PLLGP_CR5, 0xad0000);
+ regmap_write(priv->regmap, MT7531_ANA_PLLGP_CR5, 0xad0000);
/* Enable 250SSC clock for RGMII */
- mt7530_write(priv, MT7531_ANA_PLLGP_CR2, 0x4f40000);
+ regmap_write(priv->regmap, MT7531_ANA_PLLGP_CR2, 0x4f40000);
/* Step 6: Enable MT7531 PLL */
val = mt7530_read(priv, MT7531_PLLGP_CR0);
val |= RG_COREPLL_EN;
- mt7530_write(priv, MT7531_PLLGP_CR0, val);
+ regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
val = mt7530_read(priv, MT7531_PLLGP_EN);
val |= EN_COREPLL;
- mt7530_write(priv, MT7531_PLLGP_EN, val);
+ regmap_write(priv->regmap, MT7531_PLLGP_EN, val);
usleep_range(25, 35);
}
@@ -478,8 +468,8 @@ mt7530_mib_reset(struct dsa_switch *ds)
{
struct mt7530_priv *priv = ds->priv;
- mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_FLUSH);
- mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
+ regmap_write(priv->regmap, MT7530_MIB_CCR, CCR_MIB_FLUSH);
+ regmap_write(priv->regmap, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
}
static int mt7530_phy_read_c22(struct mt7530_priv *priv, int port, int regnum)
@@ -526,7 +516,7 @@ mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_DEV_ADDR(devad) | regnum;
- mt7530_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
+ regmap_write(priv->regmap, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
@@ -537,7 +527,7 @@ mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
reg = MT7531_MDIO_CL45_READ | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_DEV_ADDR(devad);
- mt7530_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
+ regmap_write(priv->regmap, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
@@ -574,7 +564,7 @@ mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_DEV_ADDR(devad) | regnum;
- mt7530_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
+ regmap_write(priv->regmap, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
@@ -585,7 +575,7 @@ mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
reg = MT7531_MDIO_CL45_WRITE | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_DEV_ADDR(devad) | data;
- mt7530_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
+ regmap_write(priv->regmap, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
@@ -621,7 +611,7 @@ mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum)
val = MT7531_MDIO_CL22_READ | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_REG_ADDR(regnum);
- mt7530_write(priv, MT7531_PHY_IAC, val | MT7531_PHY_ACS_ST);
+ regmap_write(priv->regmap, MT7531_PHY_IAC, val | MT7531_PHY_ACS_ST);
ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
!(val & MT7531_PHY_ACS_ST), 20, 100000);
@@ -659,7 +649,7 @@ mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
reg = MT7531_MDIO_CL22_WRITE | MT7531_MDIO_PHY_ADDR(port) |
MT7531_MDIO_REG_ADDR(regnum) | data;
- mt7530_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
+ regmap_write(priv->regmap, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
ret = readx_poll_timeout(mt7530_mii_poll, &p, reg,
!(reg & MT7531_PHY_ACS_ST), 20, 100000);
@@ -1012,7 +1002,8 @@ mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
}
}
- mt7530_write(priv, MT7530_AAC, AGE_CNT(age_count) | AGE_UNIT(age_unit));
+ regmap_write(priv->regmap, MT7530_AAC,
+ AGE_CNT(age_count) | AGE_UNIT(age_unit));
return 0;
}
@@ -1050,7 +1041,7 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
/* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
case MUX_PHY_P4:
/* Setup the MAC by default for the cpu port */
- mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
+ regmap_write(priv->regmap, MT753X_PMCR_P(5), 0x56300);
break;
/* GMAC5: P5 -> SoC MAC or external PHY */
@@ -1064,7 +1055,8 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
val |= MT7530_P5_RGMII_MODE;
/* P5 RGMII RX Clock Control: delay setting for 1000M */
- mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN);
+ regmap_write(priv->regmap, MT7530_P5RGMIIRXCR,
+ CSR_RGMII_EDGE_ALIGN);
/* Don't set delay in DSA mode */
if (!dsa_is_dsa_port(priv->ds, 5) &&
@@ -1073,15 +1065,15 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
tx_delay = 4; /* n * 0.5 ns */
/* P5 RGMII TX Clock Control: delay x */
- mt7530_write(priv, MT7530_P5RGMIITXCR,
+ regmap_write(priv->regmap, MT7530_P5RGMIITXCR,
CSR_RGMII_TXC_CFG(0x10 + tx_delay));
/* reduce P5 RGMII Tx driving, 8mA */
- mt7530_write(priv, MT7530_IO_DRV_CR,
+ regmap_write(priv->regmap, MT7530_IO_DRV_CR,
P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1));
}
- mt7530_write(priv, MT753X_MTRAP, val);
+ regmap_write(priv->regmap, MT753X_MTRAP, val);
dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, mode=%s, phy-mode=%s\n", val,
mt7530_p5_mode_str(priv->p5_mode), phy_modes(interface));
@@ -1303,8 +1295,7 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
struct mt7530_priv *priv = ds->priv;
/* Enable Mediatek header mode on the cpu port */
- mt7530_write(priv, MT7530_PVC_P(port),
- PORT_SPEC_TAG);
+ regmap_write(priv->regmap, MT7530_PVC_P(port), PORT_SPEC_TAG);
/* Enable flooding on the CPU port */
mt7530_set(priv, MT753X_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
@@ -1321,7 +1312,7 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
/* CPU port gets connected to all user ports of
* the switch.
*/
- mt7530_write(priv, MT7530_PCR_P(port),
+ regmap_write(priv->regmap, MT7530_PCR_P(port),
PCR_MATRIX(dsa_user_ports(priv->ds)));
/* Set to fallback mode for independent VLAN learning */
@@ -1421,7 +1412,7 @@ mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
val |= MAX_RX_PKT_LEN_JUMBO;
}
- mt7530_write(priv, MT7530_GMACCR, val);
+ regmap_write(priv->regmap, MT7530_GMACCR, val);
return 0;
}
@@ -1587,7 +1578,7 @@ mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid)
int ret;
val = VTCR_BUSY | VTCR_FUNC(cmd) | vid;
- mt7530_write(priv, MT7530_VTCR, val);
+ regmap_write(priv->regmap, MT7530_VTCR, val);
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_VTCR);
ret = readx_poll_timeout(mt7530_mii_poll, &p, val,
@@ -1616,8 +1607,8 @@ mt7530_setup_vlan0(struct mt7530_priv *priv)
*/
val = IVL_MAC | EG_CON | PORT_MEM(MT7530_ALL_MEMBERS) | FID(FID_BRIDGED) |
VLAN_VALID;
- mt7530_write(priv, MT7530_VAWD1, val);
- mt7530_write(priv, MT7530_VAWD2, 0);
+ regmap_write(priv->regmap, MT7530_VAWD1, val);
+ regmap_write(priv->regmap, MT7530_VAWD2, 0);
return mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, 0);
}
@@ -1887,7 +1878,7 @@ mt7530_hw_vlan_add(struct mt7530_priv *priv,
*/
val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | FID(FID_BRIDGED) |
VLAN_VALID;
- mt7530_write(priv, MT7530_VAWD1, val);
+ regmap_write(priv->regmap, MT7530_VAWD1, val);
/* Decide whether adding tag or not for those outgoing packets from the
* port inside the VLAN.
@@ -1926,10 +1917,10 @@ mt7530_hw_vlan_del(struct mt7530_priv *priv,
if (new_members) {
val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) |
VLAN_VALID;
- mt7530_write(priv, MT7530_VAWD1, val);
+ regmap_write(priv->regmap, MT7530_VAWD1, val);
} else {
- mt7530_write(priv, MT7530_VAWD1, 0);
- mt7530_write(priv, MT7530_VAWD2, 0);
+ regmap_write(priv->regmap, MT7530_VAWD1, 0);
+ regmap_write(priv->regmap, MT7530_VAWD2, 0);
}
}
@@ -2070,7 +2061,7 @@ static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
val |= MT753X_MIRROR_EN(priv->id);
val &= ~MT753X_MIRROR_PORT_MASK(priv->id);
val |= MT753X_MIRROR_PORT_SET(priv->id, mirror->to_local_port);
- mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val);
+ regmap_write(priv->regmap, MT753X_MIRROR_REG(priv->id), val);
val = mt7530_read(priv, MT7530_PCR_P(port));
if (ingress) {
@@ -2080,7 +2071,7 @@ static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
val |= PORT_TX_MIR;
priv->mirror_tx |= BIT(port);
}
- mt7530_write(priv, MT7530_PCR_P(port), val);
+ regmap_write(priv->regmap, MT7530_PCR_P(port), val);
return 0;
}
@@ -2099,12 +2090,12 @@ static void mt753x_port_mirror_del(struct dsa_switch *ds, int port,
val &= ~PORT_TX_MIR;
priv->mirror_tx &= ~BIT(port);
}
- mt7530_write(priv, MT7530_PCR_P(port), val);
+ regmap_write(priv->regmap, MT7530_PCR_P(port), val);
if (!priv->mirror_rx && !priv->mirror_tx) {
val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
val &= ~MT753X_MIRROR_EN(priv->id);
- mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val);
+ regmap_write(priv->regmap, MT753X_MIRROR_REG(priv->id), val);
}
}
@@ -2202,9 +2193,9 @@ mt7530_setup_gpio(struct mt7530_priv *priv)
if (!gc)
return -ENOMEM;
- mt7530_write(priv, MT7530_LED_GPIO_OE, 0);
- mt7530_write(priv, MT7530_LED_GPIO_DIR, 0);
- mt7530_write(priv, MT7530_LED_IO_MODE, 0);
+ regmap_write(priv->regmap, MT7530_LED_GPIO_OE, 0);
+ regmap_write(priv->regmap, MT7530_LED_GPIO_DIR, 0);
+ regmap_write(priv->regmap, MT7530_LED_IO_MODE, 0);
gc->label = "mt7530";
gc->parent = dev;
@@ -2462,13 +2453,12 @@ mt7530_setup(struct dsa_switch *ds)
}
/* Reset the switch through internal reset */
- mt7530_write(priv, MT7530_SYS_CTRL,
- SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
- SYS_CTRL_REG_RST);
+ regmap_write(priv->regmap, MT7530_SYS_CTRL,
+ SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | SYS_CTRL_REG_RST);
/* Lower Tx driving for TRGMII path */
for (i = 0; i < NUM_TRGMII_CTRL; i++)
- mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
+ regmap_write(priv->regmap, MT7530_TRGMII_TD_ODT(i),
TD_DM_DRVP(8) | TD_DM_DRVN(8));
for (i = 0; i < NUM_TRGMII_CTRL; i++)
@@ -2647,7 +2637,7 @@ mt7531_setup_common(struct dsa_switch *ds)
/* Enable Special Tag for rx frames */
if (priv->id == ID_EN7581 || priv->id == ID_AN7583)
- mt7530_write(priv, MT753X_CPORT_SPTAG_CFG,
+ regmap_write(priv->regmap, MT753X_CPORT_SPTAG_CFG,
CPORT_SW2FE_STAG_EN | CPORT_FE2SW_STAG_EN);
/* Flush the FDB table */
@@ -2705,10 +2695,12 @@ mt7531_setup(struct dsa_switch *ds)
/* Force link down on all ports before internal reset */
for (i = 0; i < priv->ds->num_ports; i++)
- mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
+ regmap_write(priv->regmap, MT753X_PMCR_P(i),
+ MT7531_FORCE_MODE_LNK);
/* Reset the switch through internal reset */
- mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST);
+ regmap_write(priv->regmap, MT7530_SYS_CTRL,
+ SYS_CTRL_SW_RST | SYS_CTRL_REG_RST);
if (!priv->p5_sgmii) {
mt7531_pll_setup(priv);
@@ -2917,7 +2909,7 @@ static void mt7531_rgmii_setup(struct mt7530_priv *priv,
}
}
- mt7530_write(priv, MT7531_CLKGEN_CTRL, val);
+ regmap_write(priv->regmap, MT7531_CLKGEN_CTRL, val);
}
static void
@@ -3254,7 +3246,7 @@ static int mt753x_tc_setup_qdisc_tbf(struct dsa_switch *ds, int port,
FIELD_PREP(ERLCR_EXP_MASK, tick) |
ERLCR_TBF_MODE_MASK |
FIELD_PREP(ERLCR_MANT_MASK, 0xf);
- mt7530_write(priv, MT753X_ERLCR_P(port), val);
+ regmap_write(priv->regmap, MT753X_ERLCR_P(port), val);
break;
}
default:
@@ -3296,7 +3288,7 @@ static int mt7988_setup(struct dsa_switch *ds)
FIELD_PREP(AN7583_CSR_ETHER_AFE_PWD, 0));
/* Reset the switch PHYs */
- mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST);
+ regmap_write(priv->regmap, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST);
return mt7531_setup_common(ds);
}
--
2.54.0
^ permalink raw reply related
* [PATCH net-next v2 4/8] net: dsa: mt7530: replace mt7530_rmw/set/clear with regmap API
From: Daniel Golle @ 2026-06-13 1:11 UTC (permalink / raw)
To: Chester A. Unal, Daniel Golle, Andrew Lunn, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Matthias Brugger, AngeloGioacchino Del Regno, Russell King,
netdev, linux-kernel, linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1781312667.git.daniel@makrotopia.org>
Replace all mt7530_rmw() calls with regmap_update_bits(), mt7530_set()
with regmap_set_bits(), and mt7530_clear() with regmap_clear_bits().
Remove the wrapper function definitions.
Generated using the following semantic patch:
@@
expression priv, reg, mask, set;
@@
-mt7530_rmw(priv, reg, mask, set)
+regmap_update_bits(priv->regmap, reg, mask, set)
@@
expression priv, reg, val;
@@
-mt7530_set(priv, reg, val)
+regmap_set_bits(priv->regmap, reg, val)
@@
expression priv, reg, val;
@@
-mt7530_clear(priv, reg, val)
+regmap_clear_bits(priv->regmap, reg, val)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: remove stray 'static void' leftover
drivers/net/dsa/mt7530.c | 359 ++++++++++++++++++++-------------------
1 file changed, 182 insertions(+), 177 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index ce4efcf1b3e6..fe7e4ab5ae9c 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -174,25 +174,6 @@ mt7530_mii_poll(struct mt7530_dummy_poll *p)
return mt7530_read(p->priv, p->reg);
}
-static void
-mt7530_rmw(struct mt7530_priv *priv, u32 reg,
- u32 mask, u32 set)
-{
- regmap_update_bits(priv->regmap, reg, mask, set);
-}
-
-static void
-mt7530_set(struct mt7530_priv *priv, u32 reg, u32 val)
-{
- mt7530_rmw(priv, reg, val, val);
-}
-
-static void
-mt7530_clear(struct mt7530_priv *priv, u32 reg, u32 val)
-{
- mt7530_rmw(priv, reg, val, 0);
-}
-
static int
mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp)
{
@@ -332,12 +313,13 @@ mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface)
core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
if (interface == PHY_INTERFACE_MODE_RGMII) {
- mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
- P6_INTF_MODE(0));
+ regmap_update_bits(priv->regmap, MT7530_P6ECR,
+ P6_INTF_MODE_MASK, P6_INTF_MODE(0));
return;
}
- mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1));
+ regmap_update_bits(priv->regmap, MT7530_P6ECR, P6_INTF_MODE_MASK,
+ P6_INTF_MODE(1));
xtal = mt7530_read(priv, MT753X_MTRAP) & MT7530_XTAL_MASK;
@@ -1258,35 +1240,35 @@ mt753x_trap_frames(struct mt7530_priv *priv)
* switch egress VLAN tag processing. This preserves VLAN tags
* for reception on VLAN sub-interfaces.
*/
- mt7530_rmw(priv, MT753X_BPC,
- PAE_BPDU_FR | PAE_EG_TAG_MASK | PAE_PORT_FW_MASK |
- BPDU_EG_TAG_MASK | BPDU_PORT_FW_MASK,
- PAE_BPDU_FR | PAE_EG_TAG(MT7530_VLAN_EG_DISABLED) |
- PAE_PORT_FW(TO_CPU_FW_CPU_ONLY) |
- BPDU_EG_TAG(MT7530_VLAN_EG_DISABLED) |
- TO_CPU_FW_CPU_ONLY);
+ regmap_update_bits(priv->regmap, MT753X_BPC,
+ PAE_BPDU_FR | PAE_EG_TAG_MASK | PAE_PORT_FW_MASK |
+ BPDU_EG_TAG_MASK | BPDU_PORT_FW_MASK,
+ PAE_BPDU_FR | PAE_EG_TAG(MT7530_VLAN_EG_DISABLED) |
+ PAE_PORT_FW(TO_CPU_FW_CPU_ONLY) |
+ BPDU_EG_TAG(MT7530_VLAN_EG_DISABLED) |
+ TO_CPU_FW_CPU_ONLY);
/* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and
* egress them with EG_TAG disabled.
*/
- mt7530_rmw(priv, MT753X_RGAC1,
- R02_BPDU_FR | R02_EG_TAG_MASK | R02_PORT_FW_MASK |
- R01_BPDU_FR | R01_EG_TAG_MASK | R01_PORT_FW_MASK,
- R02_BPDU_FR | R02_EG_TAG(MT7530_VLAN_EG_DISABLED) |
- R02_PORT_FW(TO_CPU_FW_CPU_ONLY) | R01_BPDU_FR |
- R01_EG_TAG(MT7530_VLAN_EG_DISABLED) |
- TO_CPU_FW_CPU_ONLY);
+ regmap_update_bits(priv->regmap, MT753X_RGAC1,
+ R02_BPDU_FR | R02_EG_TAG_MASK | R02_PORT_FW_MASK |
+ R01_BPDU_FR | R01_EG_TAG_MASK | R01_PORT_FW_MASK,
+ R02_BPDU_FR | R02_EG_TAG(MT7530_VLAN_EG_DISABLED) |
+ R02_PORT_FW(TO_CPU_FW_CPU_ONLY) | R01_BPDU_FR |
+ R01_EG_TAG(MT7530_VLAN_EG_DISABLED) |
+ TO_CPU_FW_CPU_ONLY);
/* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and
* egress them with EG_TAG disabled.
*/
- mt7530_rmw(priv, MT753X_RGAC2,
- R0E_BPDU_FR | R0E_EG_TAG_MASK | R0E_PORT_FW_MASK |
- R03_BPDU_FR | R03_EG_TAG_MASK | R03_PORT_FW_MASK,
- R0E_BPDU_FR | R0E_EG_TAG(MT7530_VLAN_EG_DISABLED) |
- R0E_PORT_FW(TO_CPU_FW_CPU_ONLY) | R03_BPDU_FR |
- R03_EG_TAG(MT7530_VLAN_EG_DISABLED) |
- TO_CPU_FW_CPU_ONLY);
+ regmap_update_bits(priv->regmap, MT753X_RGAC2,
+ R0E_BPDU_FR | R0E_EG_TAG_MASK | R0E_PORT_FW_MASK |
+ R03_BPDU_FR | R03_EG_TAG_MASK | R03_PORT_FW_MASK,
+ R0E_BPDU_FR | R0E_EG_TAG(MT7530_VLAN_EG_DISABLED) |
+ R0E_PORT_FW(TO_CPU_FW_CPU_ONLY) | R03_BPDU_FR |
+ R03_EG_TAG(MT7530_VLAN_EG_DISABLED) |
+ TO_CPU_FW_CPU_ONLY);
}
static void
@@ -1298,8 +1280,8 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
regmap_write(priv->regmap, MT7530_PVC_P(port), PORT_SPEC_TAG);
/* Enable flooding on the CPU port */
- mt7530_set(priv, MT753X_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
- UNU_FFP(BIT(port)));
+ regmap_set_bits(priv->regmap, MT753X_MFC,
+ BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) | UNU_FFP(BIT(port)));
/* Add the CPU port to the CPU port bitmap for MT7531 and the switch on
* the MT7988 SoC. Trapped frames will be forwarded to the CPU port that
@@ -1307,7 +1289,8 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
*/
if (priv->id == ID_MT7531 || priv->id == ID_MT7988 ||
priv->id == ID_EN7581 || priv->id == ID_AN7583)
- mt7530_set(priv, MT7531_CFC, MT7531_CPU_PMAP(BIT(port)));
+ regmap_set_bits(priv->regmap, MT7531_CFC,
+ MT7531_CPU_PMAP(BIT(port)));
/* CPU port gets connected to all user ports of
* the switch.
@@ -1316,8 +1299,8 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
PCR_MATRIX(dsa_user_ports(priv->ds)));
/* Set to fallback mode for independent VLAN learning */
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
- MT7530_PORT_FALLBACK_MODE);
+ regmap_update_bits(priv->regmap, MT7530_PCR_P(port),
+ PCR_PORT_VLAN_MASK, MT7530_PORT_FALLBACK_MODE);
}
static int
@@ -1339,8 +1322,8 @@ mt7530_port_enable(struct dsa_switch *ds, int port,
priv->ports[port].pm |= PCR_MATRIX(BIT(cpu_dp->index));
}
priv->ports[port].enable = true;
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
- priv->ports[port].pm);
+ regmap_update_bits(priv->regmap, MT7530_PCR_P(port), PCR_MATRIX_MASK,
+ priv->ports[port].pm);
mutex_unlock(&priv->reg_mutex);
@@ -1348,9 +1331,9 @@ mt7530_port_enable(struct dsa_switch *ds, int port,
return 0;
if (port == 5)
- mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS);
+ regmap_clear_bits(priv->regmap, MT753X_MTRAP, MT7530_P5_DIS);
else if (port == 6)
- mt7530_clear(priv, MT753X_MTRAP, MT7530_P6_DIS);
+ regmap_clear_bits(priv->regmap, MT753X_MTRAP, MT7530_P6_DIS);
return 0;
}
@@ -1366,8 +1349,8 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
* enablement for the port.
*/
priv->ports[port].enable = false;
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
- PCR_MATRIX_CLR);
+ regmap_update_bits(priv->regmap, MT7530_PCR_P(port), PCR_MATRIX_MASK,
+ PCR_MATRIX_CLR);
mutex_unlock(&priv->reg_mutex);
@@ -1376,9 +1359,9 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
/* Do not set MT7530_P5_DIS when port 5 is being used for PHY muxing. */
if (port == 5 && priv->p5_mode == GMAC5)
- mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS);
+ regmap_set_bits(priv->regmap, MT753X_MTRAP, MT7530_P5_DIS);
else if (port == 6)
- mt7530_set(priv, MT753X_MTRAP, MT7530_P6_DIS);
+ regmap_set_bits(priv->regmap, MT753X_MTRAP, MT7530_P6_DIS);
}
static int
@@ -1448,8 +1431,9 @@ mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state)
break;
}
- mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK(FID_BRIDGED),
- FID_PST(FID_BRIDGED, stp_state));
+ regmap_update_bits(priv->regmap, MT7530_SSP_P(port),
+ FID_PST_MASK(FID_BRIDGED),
+ FID_PST(FID_BRIDGED, stp_state));
}
static void mt7530_update_port_member(struct mt7530_priv *priv, int port,
@@ -1488,8 +1472,9 @@ static void mt7530_update_port_member(struct mt7530_priv *priv, int port,
}
if (other_p->enable)
- mt7530_rmw(priv, MT7530_PCR_P(other_port),
- PCR_MATRIX_MASK, other_p->pm);
+ regmap_update_bits(priv->regmap,
+ MT7530_PCR_P(other_port),
+ PCR_MATRIX_MASK, other_p->pm);
}
/* Add/remove the all other ports to this port matrix. For !join
@@ -1498,7 +1483,8 @@ static void mt7530_update_port_member(struct mt7530_priv *priv, int port,
*/
p->pm = PCR_MATRIX(port_bitmap);
if (priv->ports[port].enable)
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, p->pm);
+ regmap_update_bits(priv->regmap, MT7530_PCR_P(port),
+ PCR_MATRIX_MASK, p->pm);
}
static int
@@ -1521,20 +1507,23 @@ mt7530_port_bridge_flags(struct dsa_switch *ds, int port,
struct mt7530_priv *priv = ds->priv;
if (flags.mask & BR_LEARNING)
- mt7530_rmw(priv, MT7530_PSC_P(port), SA_DIS,
- flags.val & BR_LEARNING ? 0 : SA_DIS);
+ regmap_update_bits(priv->regmap, MT7530_PSC_P(port), SA_DIS,
+ flags.val & BR_LEARNING ? 0 : SA_DIS);
if (flags.mask & BR_FLOOD)
- mt7530_rmw(priv, MT753X_MFC, UNU_FFP(BIT(port)),
- flags.val & BR_FLOOD ? UNU_FFP(BIT(port)) : 0);
+ regmap_update_bits(priv->regmap, MT753X_MFC,
+ UNU_FFP(BIT(port)),
+ flags.val & BR_FLOOD ? UNU_FFP(BIT(port)) : 0);
if (flags.mask & BR_MCAST_FLOOD)
- mt7530_rmw(priv, MT753X_MFC, UNM_FFP(BIT(port)),
- flags.val & BR_MCAST_FLOOD ? UNM_FFP(BIT(port)) : 0);
+ regmap_update_bits(priv->regmap, MT753X_MFC,
+ UNM_FFP(BIT(port)),
+ flags.val & BR_MCAST_FLOOD ? UNM_FFP(BIT(port)) : 0);
if (flags.mask & BR_BCAST_FLOOD)
- mt7530_rmw(priv, MT753X_MFC, BC_FFP(BIT(port)),
- flags.val & BR_BCAST_FLOOD ? BC_FFP(BIT(port)) : 0);
+ regmap_update_bits(priv->regmap, MT753X_MFC,
+ BC_FFP(BIT(port)),
+ flags.val & BR_BCAST_FLOOD ? BC_FFP(BIT(port)) : 0);
if (flags.mask & BR_ISOLATED) {
struct dsa_port *dp = dsa_to_port(ds, port);
@@ -1562,8 +1551,8 @@ mt7530_port_bridge_join(struct dsa_switch *ds, int port,
mt7530_update_port_member(priv, port, bridge.dev, true);
/* Set to fallback mode for independent VLAN learning */
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
- MT7530_PORT_FALLBACK_MODE);
+ regmap_update_bits(priv->regmap, MT7530_PCR_P(port),
+ PCR_PORT_VLAN_MASK, MT7530_PORT_FALLBACK_MODE);
mutex_unlock(&priv->reg_mutex);
@@ -1624,18 +1613,19 @@ mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port)
* bridge. Don't set standalone ports to fallback mode.
*/
if (dsa_port_bridge_dev_get(dsa_to_port(ds, port)))
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
- MT7530_PORT_FALLBACK_MODE);
-
- mt7530_rmw(priv, MT7530_PVC_P(port),
- VLAN_ATTR_MASK | PVC_EG_TAG_MASK | ACC_FRM_MASK,
- VLAN_ATTR(MT7530_VLAN_TRANSPARENT) |
- PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT) |
- MT7530_VLAN_ACC_ALL);
+ regmap_update_bits(priv->regmap, MT7530_PCR_P(port),
+ PCR_PORT_VLAN_MASK,
+ MT7530_PORT_FALLBACK_MODE);
+
+ regmap_update_bits(priv->regmap, MT7530_PVC_P(port),
+ VLAN_ATTR_MASK | PVC_EG_TAG_MASK | ACC_FRM_MASK,
+ VLAN_ATTR(MT7530_VLAN_TRANSPARENT) |
+ PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT) |
+ MT7530_VLAN_ACC_ALL);
/* Set PVID to 0 */
- mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
- G0_PORT_VID_DEF);
+ regmap_update_bits(priv->regmap, MT7530_PPBV1_P(port),
+ G0_PORT_VID_MASK, G0_PORT_VID_DEF);
for (i = 0; i < priv->ds->num_ports; i++) {
if (i == port)
@@ -1666,24 +1656,27 @@ mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
* table lookup.
*/
if (dsa_is_user_port(ds, port)) {
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
- MT7530_PORT_SECURITY_MODE);
- mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
- G0_PORT_VID(priv->ports[port].pvid));
+ regmap_update_bits(priv->regmap, MT7530_PCR_P(port),
+ PCR_PORT_VLAN_MASK,
+ MT7530_PORT_SECURITY_MODE);
+ regmap_update_bits(priv->regmap, MT7530_PPBV1_P(port),
+ G0_PORT_VID_MASK,
+ G0_PORT_VID(priv->ports[port].pvid));
/* Only accept tagged frames if PVID is not set */
if (!priv->ports[port].pvid)
- mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK,
- MT7530_VLAN_ACC_TAGGED);
+ regmap_update_bits(priv->regmap, MT7530_PVC_P(port),
+ ACC_FRM_MASK,
+ MT7530_VLAN_ACC_TAGGED);
/* Set the port as a user port which is to be able to recognize
* VID from incoming packets before fetching entry within the
* VLAN table.
*/
- mt7530_rmw(priv, MT7530_PVC_P(port),
- VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
- VLAN_ATTR(MT7530_VLAN_USER) |
- PVC_EG_TAG(MT7530_VLAN_EG_DISABLED));
+ regmap_update_bits(priv->regmap, MT7530_PVC_P(port),
+ VLAN_ATTR_MASK | PVC_EG_TAG_MASK,
+ VLAN_ATTR(MT7530_VLAN_USER) |
+ PVC_EG_TAG(MT7530_VLAN_EG_DISABLED));
} else {
/* Also set CPU ports to the "user" VLAN port attribute, to
* allow VLAN classification, but keep the EG_TAG attribute as
@@ -1692,8 +1685,9 @@ mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
* are forwarded to user ports as tagged, and untagged as
* untagged.
*/
- mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK,
- VLAN_ATTR(MT7530_VLAN_USER));
+ regmap_update_bits(priv->regmap, MT7530_PVC_P(port),
+ VLAN_ATTR_MASK,
+ VLAN_ATTR(MT7530_VLAN_USER));
}
}
@@ -1711,8 +1705,8 @@ mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
* back to the default as is at initial boot which is a VLAN-unaware
* port.
*/
- mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
- MT7530_PORT_MATRIX_MODE);
+ regmap_update_bits(priv->regmap, MT7530_PCR_P(port),
+ PCR_PORT_VLAN_MASK, MT7530_PORT_MATRIX_MODE);
mutex_unlock(&priv->reg_mutex);
}
@@ -1893,9 +1887,9 @@ mt7530_hw_vlan_add(struct mt7530_priv *priv,
val = MT7530_VLAN_EGRESS_UNTAG;
else
val = MT7530_VLAN_EGRESS_TAG;
- mt7530_rmw(priv, MT7530_VAWD2,
- ETAG_CTRL_P_MASK(entry->port),
- ETAG_CTRL_P(entry->port, val));
+ regmap_update_bits(priv->regmap, MT7530_VAWD2,
+ ETAG_CTRL_P_MASK(entry->port),
+ ETAG_CTRL_P(entry->port, val));
}
static void
@@ -1973,25 +1967,26 @@ mt7530_port_vlan_add(struct dsa_switch *ds, int port,
priv->ports[port].pvid = vlan->vid;
/* Accept all frames if PVID is set */
- mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK,
- MT7530_VLAN_ACC_ALL);
+ regmap_update_bits(priv->regmap, MT7530_PVC_P(port),
+ ACC_FRM_MASK, MT7530_VLAN_ACC_ALL);
/* Only configure PVID if VLAN filtering is enabled */
if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port)))
- mt7530_rmw(priv, MT7530_PPBV1_P(port),
- G0_PORT_VID_MASK,
- G0_PORT_VID(vlan->vid));
+ regmap_update_bits(priv->regmap, MT7530_PPBV1_P(port),
+ G0_PORT_VID_MASK,
+ G0_PORT_VID(vlan->vid));
} else if (vlan->vid && priv->ports[port].pvid == vlan->vid) {
/* This VLAN is overwritten without PVID, so unset it */
priv->ports[port].pvid = G0_PORT_VID_DEF;
/* Only accept tagged frames if the port is VLAN-aware */
if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port)))
- mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK,
- MT7530_VLAN_ACC_TAGGED);
+ regmap_update_bits(priv->regmap, MT7530_PVC_P(port),
+ ACC_FRM_MASK,
+ MT7530_VLAN_ACC_TAGGED);
- mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
- G0_PORT_VID_DEF);
+ regmap_update_bits(priv->regmap, MT7530_PPBV1_P(port),
+ G0_PORT_VID_MASK, G0_PORT_VID_DEF);
}
mutex_unlock(&priv->reg_mutex);
@@ -2025,11 +2020,12 @@ mt7530_port_vlan_del(struct dsa_switch *ds, int port,
/* Only accept tagged frames if the port is VLAN-aware */
if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port)))
- mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK,
- MT7530_VLAN_ACC_TAGGED);
+ regmap_update_bits(priv->regmap, MT7530_PVC_P(port),
+ ACC_FRM_MASK,
+ MT7530_VLAN_ACC_TAGGED);
- mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
- G0_PORT_VID_DEF);
+ regmap_update_bits(priv->regmap, MT7530_PPBV1_P(port),
+ G0_PORT_VID_MASK, G0_PORT_VID_DEF);
}
@@ -2136,9 +2132,9 @@ mt7530_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
u32 bit = mt7530_gpio_to_bit(offset);
if (value)
- mt7530_set(priv, MT7530_LED_GPIO_DATA, bit);
+ regmap_set_bits(priv->regmap, MT7530_LED_GPIO_DATA, bit);
else
- mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit);
+ regmap_clear_bits(priv->regmap, MT7530_LED_GPIO_DATA, bit);
return 0;
}
@@ -2159,8 +2155,8 @@ mt7530_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
struct mt7530_priv *priv = gpiochip_get_data(gc);
u32 bit = mt7530_gpio_to_bit(offset);
- mt7530_clear(priv, MT7530_LED_GPIO_OE, bit);
- mt7530_clear(priv, MT7530_LED_GPIO_DIR, bit);
+ regmap_clear_bits(priv->regmap, MT7530_LED_GPIO_OE, bit);
+ regmap_clear_bits(priv->regmap, MT7530_LED_GPIO_DIR, bit);
return 0;
}
@@ -2171,14 +2167,14 @@ mt7530_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int valu
struct mt7530_priv *priv = gpiochip_get_data(gc);
u32 bit = mt7530_gpio_to_bit(offset);
- mt7530_set(priv, MT7530_LED_GPIO_DIR, bit);
+ regmap_set_bits(priv->regmap, MT7530_LED_GPIO_DIR, bit);
if (value)
- mt7530_set(priv, MT7530_LED_GPIO_DATA, bit);
+ regmap_set_bits(priv->regmap, MT7530_LED_GPIO_DATA, bit);
else
- mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit);
+ regmap_clear_bits(priv->regmap, MT7530_LED_GPIO_DATA, bit);
- mt7530_set(priv, MT7530_LED_GPIO_OE, bit);
+ regmap_set_bits(priv->regmap, MT7530_LED_GPIO_OE, bit);
return 0;
}
@@ -2284,7 +2280,8 @@ mt7530_setup_irq(struct mt7530_priv *priv)
/* This register must be set for MT7530 to properly fire interrupts */
if (priv->id == ID_MT7530 || priv->id == ID_MT7621)
- mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL);
+ regmap_set_bits(priv->regmap, MT7530_TOP_SIG_CTRL,
+ TOP_SIG_CTRL_NORMAL);
ret = devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(dev),
priv->regmap, irq,
@@ -2462,14 +2459,15 @@ mt7530_setup(struct dsa_switch *ds)
TD_DM_DRVP(8) | TD_DM_DRVN(8));
for (i = 0; i < NUM_TRGMII_CTRL; i++)
- mt7530_rmw(priv, MT7530_TRGMII_RD(i),
- RD_TAP_MASK, RD_TAP(16));
+ regmap_update_bits(priv->regmap, MT7530_TRGMII_RD(i),
+ RD_TAP_MASK, RD_TAP(16));
/* Allow modifying the trap and directly access PHY registers via the
* MDIO bus the switch is on.
*/
- mt7530_rmw(priv, MT753X_MTRAP, MT7530_CHG_TRAP |
- MT7530_PHY_INDIRECT_ACCESS, MT7530_CHG_TRAP);
+ regmap_update_bits(priv->regmap, MT753X_MTRAP,
+ MT7530_CHG_TRAP | MT7530_PHY_INDIRECT_ACCESS,
+ MT7530_CHG_TRAP);
if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_40MHZ)
mt7530_pll_setup(priv);
@@ -2483,17 +2481,16 @@ mt7530_setup(struct dsa_switch *ds)
/* Clear link settings and enable force mode to force link down
* on all ports until they're enabled later.
*/
- mt7530_rmw(priv, MT753X_PMCR_P(i),
- PMCR_LINK_SETTINGS_MASK |
- MT753X_FORCE_MODE(priv->id),
- MT753X_FORCE_MODE(priv->id));
+ regmap_update_bits(priv->regmap, MT753X_PMCR_P(i),
+ PMCR_LINK_SETTINGS_MASK | MT753X_FORCE_MODE(priv->id),
+ MT753X_FORCE_MODE(priv->id));
/* Disable forwarding by default on all ports */
- mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
- PCR_MATRIX_CLR);
+ regmap_update_bits(priv->regmap, MT7530_PCR_P(i),
+ PCR_MATRIX_MASK, PCR_MATRIX_CLR);
/* Disable learning by default on all ports */
- mt7530_set(priv, MT7530_PSC_P(i), SA_DIS);
+ regmap_set_bits(priv->regmap, MT7530_PSC_P(i), SA_DIS);
if (dsa_is_cpu_port(ds, i)) {
mt753x_cpu_port_enable(ds, i);
@@ -2501,16 +2498,17 @@ mt7530_setup(struct dsa_switch *ds)
mt7530_port_disable(ds, i);
/* Set default PVID to 0 on all user ports */
- mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK,
- G0_PORT_VID_DEF);
+ regmap_update_bits(priv->regmap, MT7530_PPBV1_P(i),
+ G0_PORT_VID_MASK, G0_PORT_VID_DEF);
}
/* Enable consistent egress tag */
- mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
- PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
+ regmap_update_bits(priv->regmap, MT7530_PVC_P(i),
+ PVC_EG_TAG_MASK,
+ PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
}
/* Allow mirroring frames received on the local port (monitor port). */
- mt7530_set(priv, MT753X_AGC, LOCAL_EN);
+ regmap_set_bits(priv->regmap, MT753X_AGC, LOCAL_EN);
/* Setup VLAN ID 0 for VLAN-unaware bridges */
ret = mt7530_setup_vlan0(priv);
@@ -2557,7 +2555,8 @@ mt7530_setup(struct dsa_switch *ds)
if (priv->p5_mode == MUX_PHY_P0 ||
priv->p5_mode == MUX_PHY_P4) {
- mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS);
+ regmap_clear_bits(priv->regmap, MT753X_MTRAP,
+ MT7530_P5_DIS);
mt7530_setup_port5(ds, interface);
}
}
@@ -2596,26 +2595,26 @@ mt7531_setup_common(struct dsa_switch *ds)
mt7530_mib_reset(ds);
/* Disable flooding on all ports */
- mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK |
- UNU_FFP_MASK);
+ regmap_clear_bits(priv->regmap, MT753X_MFC,
+ BC_FFP_MASK | UNM_FFP_MASK | UNU_FFP_MASK);
for (i = 0; i < priv->ds->num_ports; i++) {
/* Clear link settings and enable force mode to force link down
* on all ports until they're enabled later.
*/
- mt7530_rmw(priv, MT753X_PMCR_P(i),
- PMCR_LINK_SETTINGS_MASK |
- MT753X_FORCE_MODE(priv->id),
- MT753X_FORCE_MODE(priv->id));
+ regmap_update_bits(priv->regmap, MT753X_PMCR_P(i),
+ PMCR_LINK_SETTINGS_MASK | MT753X_FORCE_MODE(priv->id),
+ MT753X_FORCE_MODE(priv->id));
/* Disable forwarding by default on all ports */
- mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
- PCR_MATRIX_CLR);
+ regmap_update_bits(priv->regmap, MT7530_PCR_P(i),
+ PCR_MATRIX_MASK, PCR_MATRIX_CLR);
/* Disable learning by default on all ports */
- mt7530_set(priv, MT7530_PSC_P(i), SA_DIS);
+ regmap_set_bits(priv->regmap, MT7530_PSC_P(i), SA_DIS);
- mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR);
+ regmap_set_bits(priv->regmap, MT7531_DBG_CNT(i),
+ MT7531_DIS_CLR);
if (dsa_is_cpu_port(ds, i)) {
mt753x_cpu_port_enable(ds, i);
@@ -2623,17 +2622,18 @@ mt7531_setup_common(struct dsa_switch *ds)
mt7530_port_disable(ds, i);
/* Set default PVID to 0 on all user ports */
- mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK,
- G0_PORT_VID_DEF);
+ regmap_update_bits(priv->regmap, MT7530_PPBV1_P(i),
+ G0_PORT_VID_MASK, G0_PORT_VID_DEF);
}
/* Enable consistent egress tag */
- mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
- PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
+ regmap_update_bits(priv->regmap, MT7530_PVC_P(i),
+ PVC_EG_TAG_MASK,
+ PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
}
/* Allow mirroring frames received on the local port (monitor port). */
- mt7530_set(priv, MT753X_AGC, LOCAL_EN);
+ regmap_set_bits(priv->regmap, MT753X_AGC, LOCAL_EN);
/* Enable Special Tag for rx frames */
if (priv->id == ID_EN7581 || priv->id == ID_AN7583)
@@ -2709,14 +2709,16 @@ mt7531_setup(struct dsa_switch *ds)
* MT7531AE. Set the GPIO 11-12 pins to function as MDC and MDIO
* to expose the MDIO bus of the switch.
*/
- mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
- MT7531_EXT_P_MDC_11);
- mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
- MT7531_EXT_P_MDIO_12);
+ regmap_update_bits(priv->regmap, MT7531_GPIO_MODE1,
+ MT7531_GPIO11_RG_RXD2_MASK,
+ MT7531_EXT_P_MDC_11);
+ regmap_update_bits(priv->regmap, MT7531_GPIO_MODE1,
+ MT7531_GPIO12_RG_RXD3_MASK,
+ MT7531_EXT_P_MDIO_12);
}
- mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
- MT7531_GPIO0_INTERRUPT);
+ regmap_update_bits(priv->regmap, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
+ MT7531_GPIO0_INTERRUPT);
/* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since
* phy_device has not yet been created provided for
@@ -2962,7 +2964,8 @@ mt753x_phylink_mac_config(struct phylink_config *config, unsigned int mode,
/* Are we connected to external phy */
if (port == 5 && dsa_is_user_port(ds, 5))
- mt7530_set(priv, MT753X_PMCR_P(port), PMCR_EXT_PHY);
+ regmap_set_bits(priv->regmap, MT753X_PMCR_P(port),
+ PMCR_EXT_PHY);
}
static void mt753x_phylink_mac_link_down(struct phylink_config *config,
@@ -2972,7 +2975,8 @@ static void mt753x_phylink_mac_link_down(struct phylink_config *config,
struct dsa_port *dp = dsa_phylink_to_port(config);
struct mt7530_priv *priv = dp->ds->priv;
- mt7530_clear(priv, MT753X_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
+ regmap_clear_bits(priv->regmap, MT753X_PMCR_P(dp->index),
+ PMCR_LINK_SETTINGS_MASK);
}
static void mt753x_phylink_mac_link_up(struct phylink_config *config,
@@ -3006,7 +3010,7 @@ static void mt753x_phylink_mac_link_up(struct phylink_config *config,
mcr |= PMCR_FORCE_RX_FC_EN;
}
- mt7530_set(priv, MT753X_PMCR_P(dp->index), mcr);
+ regmap_set_bits(priv->regmap, MT753X_PMCR_P(dp->index), mcr);
}
static void mt753x_phylink_mac_disable_tx_lpi(struct phylink_config *config)
@@ -3014,8 +3018,8 @@ static void mt753x_phylink_mac_disable_tx_lpi(struct phylink_config *config)
struct dsa_port *dp = dsa_phylink_to_port(config);
struct mt7530_priv *priv = dp->ds->priv;
- mt7530_clear(priv, MT753X_PMCR_P(dp->index),
- PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100);
+ regmap_clear_bits(priv->regmap, MT753X_PMCR_P(dp->index),
+ PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100);
}
static int mt753x_phylink_mac_enable_tx_lpi(struct phylink_config *config,
@@ -3036,11 +3040,11 @@ static int mt753x_phylink_mac_enable_tx_lpi(struct phylink_config *config,
else
val = LPI_THRESH_MASK;
- mt7530_rmw(priv, MT753X_PMEEECR_P(dp->index),
- LPI_THRESH_MASK | LPI_MODE_EN, val);
+ regmap_update_bits(priv->regmap, MT753X_PMEEECR_P(dp->index),
+ LPI_THRESH_MASK | LPI_MODE_EN, val);
- mt7530_set(priv, MT753X_PMCR_P(dp->index),
- PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100);
+ regmap_set_bits(priv->regmap, MT753X_PMCR_P(dp->index),
+ PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100);
return 0;
}
@@ -3217,7 +3221,8 @@ mt753x_conduit_state_change(struct dsa_switch *ds,
MT7530_CPU_PORT(__ffs(priv->active_cpu_ports));
}
- mt7530_rmw(priv, MT753X_MFC, MT7530_CPU_EN | MT7530_CPU_PORT_MASK, val);
+ regmap_update_bits(priv->regmap, MT753X_MFC,
+ MT7530_CPU_EN | MT7530_CPU_PORT_MASK, val);
}
static int mt753x_tc_setup_qdisc_tbf(struct dsa_switch *ds, int port,
@@ -3234,8 +3239,8 @@ static int mt753x_tc_setup_qdisc_tbf(struct dsa_switch *ds, int port,
case TC_TBF_DESTROY: {
u32 val, tick;
- mt7530_rmw(priv, MT753X_GERLCR, EGR_BC_MASK,
- EGR_BC_CRC_IPG_PREAMBLE);
+ regmap_update_bits(priv->regmap, MT753X_GERLCR, EGR_BC_MASK,
+ EGR_BC_CRC_IPG_PREAMBLE);
/* if rate is greater than 10Mbps tick is 1/32 ms,
* 1ms otherwise
@@ -3279,13 +3284,13 @@ static int mt7988_setup(struct dsa_switch *ds)
/* AN7583 require additional tweak to CONN_CFG */
if (priv->id == ID_AN7583)
- mt7530_rmw(priv, AN7583_GEPHY_CONN_CFG,
- AN7583_CSR_DPHY_CKIN_SEL |
- AN7583_CSR_PHY_CORE_REG_CLK_SEL |
- AN7583_CSR_ETHER_AFE_PWD,
- AN7583_CSR_DPHY_CKIN_SEL |
- AN7583_CSR_PHY_CORE_REG_CLK_SEL |
- FIELD_PREP(AN7583_CSR_ETHER_AFE_PWD, 0));
+ regmap_update_bits(priv->regmap, AN7583_GEPHY_CONN_CFG,
+ AN7583_CSR_DPHY_CKIN_SEL |
+ AN7583_CSR_PHY_CORE_REG_CLK_SEL |
+ AN7583_CSR_ETHER_AFE_PWD,
+ AN7583_CSR_DPHY_CKIN_SEL |
+ AN7583_CSR_PHY_CORE_REG_CLK_SEL |
+ FIELD_PREP(AN7583_CSR_ETHER_AFE_PWD, 0));
/* Reset the switch PHYs */
regmap_write(priv->regmap, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST);
--
2.54.0
^ permalink raw reply related
* [PATCH net-next v2 5/8] net: dsa: mt7530: replace mt7530_read with regmap_read
From: Daniel Golle @ 2026-06-13 1:11 UTC (permalink / raw)
To: Chester A. Unal, Daniel Golle, Andrew Lunn, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Matthias Brugger, AngeloGioacchino Del Regno, Russell King,
netdev, linux-kernel, linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1781312667.git.daniel@makrotopia.org>
Replace all mt7530_read() calls with direct regmap_read() calls and
remove the wrapper function. The WARN_ON_ONCE error logging is dropped
as regmap provides its own error handling.
Most callsites follow the val = mt7530_read(priv, reg) pattern and are
converted mechanically using the following semantic patch:
@@
expression priv, reg;
identifier val;
@@
-val = mt7530_read(priv, reg);
+regmap_read(priv->regmap, reg, &val);
Remaining inline uses are converted by hand.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: drop fix for stray 'static void' leftover now correctly squashed
into 4/8
drivers/net/dsa/mt7530.c | 113 +++++++++++++++++++--------------------
1 file changed, 56 insertions(+), 57 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index fe7e4ab5ae9c..4168adca949f 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -152,28 +152,15 @@ core_clear(struct mt7530_priv *priv, u32 reg, u32 val)
static u32
-mt7530_read(struct mt7530_priv *priv, u32 reg)
+mt7530_mii_poll(struct mt7530_dummy_poll *p)
{
- int ret;
u32 val;
- ret = regmap_read(priv->regmap, reg, &val);
- if (ret) {
- WARN_ON_ONCE(1);
- dev_err(priv->dev,
- "failed to read mt7530 register\n");
- return 0;
- }
+ regmap_read(p->priv->regmap, p->reg, &val);
return val;
}
-static u32
-mt7530_mii_poll(struct mt7530_dummy_poll *p)
-{
- return mt7530_read(p->priv, p->reg);
-}
-
static int
mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp)
{
@@ -196,7 +183,7 @@ mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp)
/* Additional sanity for read command if the specified
* entry is invalid
*/
- val = mt7530_read(priv, MT7530_ATC);
+ regmap_read(priv->regmap, MT7530_ATC, &val);
if ((cmd == MT7530_FDB_READ) && (val & ATC_INVALID))
return -EINVAL;
@@ -214,7 +201,8 @@ mt7530_fdb_read(struct mt7530_priv *priv, struct mt7530_fdb *fdb)
/* Read from ARL table into an array */
for (i = 0; i < 3; i++) {
- reg[i] = mt7530_read(priv, MT7530_TSRA1 + (i * 4));
+ regmap_read(priv->regmap, MT7530_TSRA1 + (i * 4),
+ ®[i]);
dev_dbg(priv->dev, "%s(%d) reg[%d]=0x%x\n",
__func__, __LINE__, i, reg[i]);
@@ -321,7 +309,8 @@ mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface)
regmap_update_bits(priv->regmap, MT7530_P6ECR, P6_INTF_MODE_MASK,
P6_INTF_MODE(1));
- xtal = mt7530_read(priv, MT753X_MTRAP) & MT7530_XTAL_MASK;
+ regmap_read(priv->regmap, MT753X_MTRAP, &xtal);
+ xtal &= MT7530_XTAL_MASK;
if (xtal == MT7530_XTAL_25MHZ)
ssc_delta = 0x57;
@@ -365,9 +354,9 @@ mt7531_pll_setup(struct mt7530_priv *priv)
u32 hwstrap;
u32 val;
- val = mt7530_read(priv, MT7531_CREV);
- top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR);
- hwstrap = mt7530_read(priv, MT753X_TRAP);
+ regmap_read(priv->regmap, MT7531_CREV, &val);
+ regmap_read(priv->regmap, MT7531_TOP_SIG_SR, &top_sig);
+ regmap_read(priv->regmap, MT753X_TRAP, &hwstrap);
if ((val & CHIP_REV_M) > 0)
xtal = (top_sig & PAD_MCM_SMI_EN) ? MT7531_XTAL_FSEL_40MHZ :
MT7531_XTAL_FSEL_25MHZ;
@@ -376,26 +365,26 @@ mt7531_pll_setup(struct mt7530_priv *priv)
MT7531_XTAL_FSEL_40MHZ;
/* Step 1 : Disable MT7531 COREPLL */
- val = mt7530_read(priv, MT7531_PLLGP_EN);
+ regmap_read(priv->regmap, MT7531_PLLGP_EN, &val);
val &= ~EN_COREPLL;
regmap_write(priv->regmap, MT7531_PLLGP_EN, val);
/* Step 2: switch to XTAL output */
- val = mt7530_read(priv, MT7531_PLLGP_EN);
+ regmap_read(priv->regmap, MT7531_PLLGP_EN, &val);
val |= SW_CLKSW;
regmap_write(priv->regmap, MT7531_PLLGP_EN, val);
- val = mt7530_read(priv, MT7531_PLLGP_CR0);
+ regmap_read(priv->regmap, MT7531_PLLGP_CR0, &val);
val &= ~RG_COREPLL_EN;
regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
/* Step 3: disable PLLGP and enable program PLLGP */
- val = mt7530_read(priv, MT7531_PLLGP_EN);
+ regmap_read(priv->regmap, MT7531_PLLGP_EN, &val);
val |= SW_PLLGP;
regmap_write(priv->regmap, MT7531_PLLGP_EN, val);
/* Step 4: program COREPLL output frequency to 500MHz */
- val = mt7530_read(priv, MT7531_PLLGP_CR0);
+ regmap_read(priv->regmap, MT7531_PLLGP_CR0, &val);
val &= ~RG_COREPLL_POSDIV_M;
val |= 2 << RG_COREPLL_POSDIV_S;
regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
@@ -403,13 +392,13 @@ mt7531_pll_setup(struct mt7530_priv *priv)
switch (xtal) {
case MT7531_XTAL_FSEL_25MHZ:
- val = mt7530_read(priv, MT7531_PLLGP_CR0);
+ regmap_read(priv->regmap, MT7531_PLLGP_CR0, &val);
val &= ~RG_COREPLL_SDM_PCW_M;
val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
break;
case MT7531_XTAL_FSEL_40MHZ:
- val = mt7530_read(priv, MT7531_PLLGP_CR0);
+ regmap_read(priv->regmap, MT7531_PLLGP_CR0, &val);
val &= ~RG_COREPLL_SDM_PCW_M;
val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
@@ -417,14 +406,14 @@ mt7531_pll_setup(struct mt7530_priv *priv)
}
/* Set feedback divide ratio update signal to high */
- val = mt7530_read(priv, MT7531_PLLGP_CR0);
+ regmap_read(priv->regmap, MT7531_PLLGP_CR0, &val);
val |= RG_COREPLL_SDM_PCW_CHG;
regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
/* Wait for at least 16 XTAL clocks */
usleep_range(10, 20);
/* Step 5: set feedback divide ratio update signal to low */
- val = mt7530_read(priv, MT7531_PLLGP_CR0);
+ regmap_read(priv->regmap, MT7531_PLLGP_CR0, &val);
val &= ~RG_COREPLL_SDM_PCW_CHG;
regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
@@ -435,11 +424,11 @@ mt7531_pll_setup(struct mt7530_priv *priv)
regmap_write(priv->regmap, MT7531_ANA_PLLGP_CR2, 0x4f40000);
/* Step 6: Enable MT7531 PLL */
- val = mt7530_read(priv, MT7531_PLLGP_CR0);
+ regmap_read(priv->regmap, MT7531_PLLGP_CR0, &val);
val |= RG_COREPLL_EN;
regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
- val = mt7530_read(priv, MT7531_PLLGP_EN);
+ regmap_read(priv->regmap, MT7531_PLLGP_EN, &val);
val |= EN_COREPLL;
regmap_write(priv->regmap, MT7531_PLLGP_EN, val);
usleep_range(25, 35);
@@ -698,11 +687,11 @@ mt7530_read_port_stats(struct mt7530_priv *priv, int port,
{
u32 val, reg = MT7530_PORT_MIB_COUNTER(port) + offset;
- val = mt7530_read(priv, reg);
+ regmap_read(priv->regmap, reg, &val);
*data = val;
if (size == 2) {
- val = mt7530_read(priv, reg + 4);
+ regmap_read(priv->regmap, reg + 4, &val);
*data |= (u64)val << 32;
}
}
@@ -1010,7 +999,7 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
mutex_lock(&priv->reg_mutex);
- val = mt7530_read(priv, MT753X_MTRAP);
+ regmap_read(priv->regmap, MT753X_MTRAP, &val);
val &= ~MT7530_P5_PHY0_SEL & ~MT7530_P5_MAC_SEL & ~MT7530_P5_RGMII_MODE;
@@ -1378,7 +1367,7 @@ mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
if (!dsa_is_cpu_port(ds, port))
return 0;
- val = mt7530_read(priv, MT7530_GMACCR);
+ regmap_read(priv->regmap, MT7530_GMACCR, &val);
val &= ~MAX_RX_PKT_LEN_MASK;
/* RX length also includes Ethernet header, MTK tag, and FCS length */
@@ -1577,7 +1566,7 @@ mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid)
return ret;
}
- val = mt7530_read(priv, MT7530_VTCR);
+ regmap_read(priv->regmap, MT7530_VTCR, &val);
if (val & VTCR_INVALID) {
dev_err(priv->dev, "read VTCR invalid\n");
return -EINVAL;
@@ -1789,14 +1778,16 @@ mt7530_port_mdb_add(struct dsa_switch *ds, int port,
const u8 *addr = mdb->addr;
u16 vid = mdb->vid;
u8 port_mask = 0;
+ u32 val;
int ret;
mutex_lock(&priv->reg_mutex);
mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP);
- if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL))
- port_mask = (mt7530_read(priv, MT7530_ATRD) >> PORT_MAP)
- & PORT_MAP_MASK;
+ if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL)) {
+ regmap_read(priv->regmap, MT7530_ATRD, &val);
+ port_mask = (val >> PORT_MAP) & PORT_MAP_MASK;
+ }
port_mask |= BIT(port);
mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT);
@@ -1816,14 +1807,16 @@ mt7530_port_mdb_del(struct dsa_switch *ds, int port,
const u8 *addr = mdb->addr;
u16 vid = mdb->vid;
u8 port_mask = 0;
+ u32 val;
int ret;
mutex_lock(&priv->reg_mutex);
mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP);
- if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL))
- port_mask = (mt7530_read(priv, MT7530_ATRD) >> PORT_MAP)
- & PORT_MAP_MASK;
+ if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL)) {
+ regmap_read(priv->regmap, MT7530_ATRD, &val);
+ port_mask = (val >> PORT_MAP) & PORT_MAP_MASK;
+ }
port_mask &= ~BIT(port);
mt7530_fdb_write(priv, vid, port_mask, addr, -1,
@@ -1901,7 +1894,7 @@ mt7530_hw_vlan_del(struct mt7530_priv *priv,
new_members = entry->old_members & ~BIT(entry->port);
- val = mt7530_read(priv, MT7530_VAWD1);
+ regmap_read(priv->regmap, MT7530_VAWD1, &val);
if (!(val & VLAN_VALID)) {
dev_err(priv->dev,
"Cannot be deleted due to invalid entry\n");
@@ -1928,7 +1921,7 @@ mt7530_hw_vlan_update(struct mt7530_priv *priv, u16 vid,
/* Fetch entry */
mt7530_vlan_cmd(priv, MT7530_VTCR_RD_VID, vid);
- val = mt7530_read(priv, MT7530_VAWD1);
+ regmap_read(priv->regmap, MT7530_VAWD1, &val);
entry->old_members = (val >> PORT_MEM_SHFT) & PORT_MEM_MASK;
@@ -2046,7 +2039,7 @@ static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port))
return -EEXIST;
- val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
+ regmap_read(priv->regmap, MT753X_MIRROR_REG(priv->id), &val);
/* MT7530 only supports one monitor port */
monitor_port = MT753X_MIRROR_PORT_GET(priv->id, val);
@@ -2059,7 +2052,7 @@ static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
val |= MT753X_MIRROR_PORT_SET(priv->id, mirror->to_local_port);
regmap_write(priv->regmap, MT753X_MIRROR_REG(priv->id), val);
- val = mt7530_read(priv, MT7530_PCR_P(port));
+ regmap_read(priv->regmap, MT7530_PCR_P(port), &val);
if (ingress) {
val |= PORT_RX_MIR;
priv->mirror_rx |= BIT(port);
@@ -2078,7 +2071,7 @@ static void mt753x_port_mirror_del(struct dsa_switch *ds, int port,
struct mt7530_priv *priv = ds->priv;
u32 val;
- val = mt7530_read(priv, MT7530_PCR_P(port));
+ regmap_read(priv->regmap, MT7530_PCR_P(port), &val);
if (mirror->ingress) {
val &= ~PORT_RX_MIR;
priv->mirror_rx &= ~BIT(port);
@@ -2089,7 +2082,7 @@ static void mt753x_port_mirror_del(struct dsa_switch *ds, int port,
regmap_write(priv->regmap, MT7530_PCR_P(port), val);
if (!priv->mirror_rx && !priv->mirror_tx) {
- val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
+ regmap_read(priv->regmap, MT753X_MIRROR_REG(priv->id), &val);
val &= ~MT753X_MIRROR_EN(priv->id);
regmap_write(priv->regmap, MT753X_MIRROR_REG(priv->id), val);
}
@@ -2121,8 +2114,11 @@ mt7530_gpio_get(struct gpio_chip *gc, unsigned int offset)
{
struct mt7530_priv *priv = gpiochip_get_data(gc);
u32 bit = mt7530_gpio_to_bit(offset);
+ u32 val;
+
+ regmap_read(priv->regmap, MT7530_LED_GPIO_DATA, &val);
- return !!(mt7530_read(priv, MT7530_LED_GPIO_DATA) & bit);
+ return !!(val & bit);
}
static int
@@ -2144,8 +2140,11 @@ mt7530_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
{
struct mt7530_priv *priv = gpiochip_get_data(gc);
u32 bit = mt7530_gpio_to_bit(offset);
+ u32 val;
+
+ regmap_read(priv->regmap, MT7530_LED_GPIO_DIR, &val);
- return (mt7530_read(priv, MT7530_LED_GPIO_DIR) & bit) ?
+ return (val & bit) ?
GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
}
@@ -2436,7 +2435,7 @@ mt7530_setup(struct dsa_switch *ds)
return ret;
}
- id = mt7530_read(priv, MT7530_CREV);
+ regmap_read(priv->regmap, MT7530_CREV, &id);
id >>= CHIP_NAME_SHIFT;
if (id != MT7530_ID) {
dev_err(priv->dev, "chip %x can't be supported\n", id);
@@ -2679,7 +2678,7 @@ mt7531_setup(struct dsa_switch *ds)
return ret;
}
- id = mt7530_read(priv, MT7531_CREV);
+ regmap_read(priv->regmap, MT7531_CREV, &id);
id >>= CHIP_NAME_SHIFT;
if (id != MT7531_ID) {
@@ -2690,7 +2689,7 @@ mt7531_setup(struct dsa_switch *ds)
/* MT7531AE has got two SGMII units. One for port 5, one for port 6.
* MT7531BE has got only one SGMII unit which is for port 6.
*/
- val = mt7530_read(priv, MT7531_TOP_SIG_SR);
+ regmap_read(priv->regmap, MT7531_TOP_SIG_SR, &val);
priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
/* Force link down on all ports before internal reset */
@@ -2880,7 +2879,7 @@ static void mt7531_rgmii_setup(struct mt7530_priv *priv,
{
u32 val;
- val = mt7530_read(priv, MT7531_CLKGEN_CTRL);
+ regmap_read(priv->regmap, MT7531_CLKGEN_CTRL, &val);
val |= GP_CLK_EN;
val &= ~GP_MODE_MASK;
val |= GP_MODE(MT7531_GP_MODE_RGMII);
@@ -3059,7 +3058,7 @@ static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
config->lpi_capabilities = MAC_100FD | MAC_1000FD | MAC_2500FD;
- eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port));
+ regmap_read(priv->regmap, MT753X_PMEEECR_P(port), &eeecr);
/* tx_lpi_timer should be in microseconds. The time units for
* LPI threshold are unspecified.
*/
@@ -3087,7 +3086,7 @@ static void mt7530_pcs_get_state(struct phylink_pcs *pcs, unsigned int neg_mode,
int port = pcs_to_mt753x_pcs(pcs)->port;
u32 pmsr;
- pmsr = mt7530_read(priv, MT7530_PMSR_P(port));
+ regmap_read(priv->regmap, MT7530_PMSR_P(port), &pmsr);
state->link = (pmsr & PMSR_LINK);
state->an_complete = state->link;
--
2.54.0
^ permalink raw reply related
* [PATCH net-next v2 6/8] net: dsa: mt7530: convert to use field accessor macros
From: Daniel Golle @ 2026-06-13 1:11 UTC (permalink / raw)
To: Chester A. Unal, Daniel Golle, Andrew Lunn, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Matthias Brugger, AngeloGioacchino Del Regno, Russell King,
netdev, linux-kernel, linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1781312667.git.daniel@makrotopia.org>
Use FIELD_GET and FIELD_PREP instead of open-coding register fields.
Replace 0x1f constant with (PHY_MAX_ADDR - 1)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: no changes
drivers/net/dsa/mt7530.c | 64 ++++++------
drivers/net/dsa/mt7530.h | 208 ++++++++++++++++++++++-----------------
2 files changed, 148 insertions(+), 124 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 4168adca949f..dcf72ab0cd66 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -208,16 +208,16 @@ mt7530_fdb_read(struct mt7530_priv *priv, struct mt7530_fdb *fdb)
__func__, __LINE__, i, reg[i]);
}
- fdb->vid = (reg[1] >> CVID) & CVID_MASK;
- fdb->aging = (reg[2] >> AGE_TIMER) & AGE_TIMER_MASK;
- fdb->port_mask = (reg[2] >> PORT_MAP) & PORT_MAP_MASK;
- fdb->mac[0] = (reg[0] >> MAC_BYTE_0) & MAC_BYTE_MASK;
- fdb->mac[1] = (reg[0] >> MAC_BYTE_1) & MAC_BYTE_MASK;
- fdb->mac[2] = (reg[0] >> MAC_BYTE_2) & MAC_BYTE_MASK;
- fdb->mac[3] = (reg[0] >> MAC_BYTE_3) & MAC_BYTE_MASK;
- fdb->mac[4] = (reg[1] >> MAC_BYTE_4) & MAC_BYTE_MASK;
- fdb->mac[5] = (reg[1] >> MAC_BYTE_5) & MAC_BYTE_MASK;
- fdb->noarp = ((reg[2] >> ENT_STATUS) & ENT_STATUS_MASK) == STATIC_ENT;
+ fdb->vid = FIELD_GET(CVID_MASK, reg[1]);
+ fdb->aging = FIELD_GET(AGE_TIMER_RD_MASK, reg[2]);
+ fdb->port_mask = FIELD_GET(PORT_MAP_MASK, reg[2]);
+ fdb->mac[0] = FIELD_GET(MAC_BYTE_0_MASK, reg[0]);
+ fdb->mac[1] = FIELD_GET(MAC_BYTE_1_MASK, reg[0]);
+ fdb->mac[2] = FIELD_GET(MAC_BYTE_2_MASK, reg[0]);
+ fdb->mac[3] = FIELD_GET(MAC_BYTE_3_MASK, reg[0]);
+ fdb->mac[4] = FIELD_GET(MAC_BYTE_4_MASK, reg[1]);
+ fdb->mac[5] = FIELD_GET(MAC_BYTE_5_MASK, reg[1]);
+ fdb->noarp = FIELD_GET(ENT_STATUS_MASK, reg[2]) == STATIC_ENT;
}
static void
@@ -228,22 +228,22 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
u32 reg[3] = { 0 };
int i;
- reg[1] |= vid & CVID_MASK;
+ reg[1] |= FIELD_PREP(CVID_MASK, vid);
reg[1] |= ATA2_IVL;
reg[1] |= ATA2_FID(FID_BRIDGED);
- reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER;
- reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP;
+ reg[2] |= FIELD_PREP(AGE_TIMER_RD_MASK, aging);
+ reg[2] |= FIELD_PREP(PORT_MAP_MASK, port_mask);
/* STATIC_ENT indicate that entry is static wouldn't
* be aged out and STATIC_EMP specified as erasing an
* entry
*/
- reg[2] |= (type & ENT_STATUS_MASK) << ENT_STATUS;
- reg[1] |= mac[5] << MAC_BYTE_5;
- reg[1] |= mac[4] << MAC_BYTE_4;
- reg[0] |= mac[3] << MAC_BYTE_3;
- reg[0] |= mac[2] << MAC_BYTE_2;
- reg[0] |= mac[1] << MAC_BYTE_1;
- reg[0] |= mac[0] << MAC_BYTE_0;
+ reg[2] |= FIELD_PREP(ENT_STATUS_MASK, type);
+ reg[1] |= FIELD_PREP(MAC_BYTE_5_MASK, mac[5]);
+ reg[1] |= FIELD_PREP(MAC_BYTE_4_MASK, mac[4]);
+ reg[0] |= FIELD_PREP(MAC_BYTE_3_MASK, mac[3]);
+ reg[0] |= FIELD_PREP(MAC_BYTE_2_MASK, mac[2]);
+ reg[0] |= FIELD_PREP(MAC_BYTE_1_MASK, mac[1]);
+ reg[0] |= FIELD_PREP(MAC_BYTE_0_MASK, mac[0]);
/* Write array into the ARL table */
for (i = 0; i < 3; i++)
@@ -385,22 +385,22 @@ mt7531_pll_setup(struct mt7530_priv *priv)
/* Step 4: program COREPLL output frequency to 500MHz */
regmap_read(priv->regmap, MT7531_PLLGP_CR0, &val);
- val &= ~RG_COREPLL_POSDIV_M;
- val |= 2 << RG_COREPLL_POSDIV_S;
+ val &= ~RG_COREPLL_POSDIV_MASK;
+ val |= RG_COREPLL_POSDIV(2);
regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
usleep_range(25, 35);
switch (xtal) {
case MT7531_XTAL_FSEL_25MHZ:
regmap_read(priv->regmap, MT7531_PLLGP_CR0, &val);
- val &= ~RG_COREPLL_SDM_PCW_M;
- val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
+ val &= ~RG_COREPLL_SDM_PCW_MASK;
+ val |= RG_COREPLL_SDM_PCW(0x140000);
regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
break;
case MT7531_XTAL_FSEL_40MHZ:
regmap_read(priv->regmap, MT7531_PLLGP_CR0, &val);
- val &= ~RG_COREPLL_SDM_PCW_M;
- val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
+ val &= ~RG_COREPLL_SDM_PCW_MASK;
+ val |= RG_COREPLL_SDM_PCW(0x190000);
regmap_write(priv->regmap, MT7531_PLLGP_CR0, val);
break;
}
@@ -1555,7 +1555,7 @@ mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid)
u32 val;
int ret;
- val = VTCR_BUSY | VTCR_FUNC(cmd) | vid;
+ val = VTCR_BUSY | VTCR_FUNC(cmd) | VTCR_VID(vid);
regmap_write(priv->regmap, MT7530_VTCR, val);
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_VTCR);
@@ -1786,7 +1786,7 @@ mt7530_port_mdb_add(struct dsa_switch *ds, int port,
mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP);
if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL)) {
regmap_read(priv->regmap, MT7530_ATRD, &val);
- port_mask = (val >> PORT_MAP) & PORT_MAP_MASK;
+ port_mask = FIELD_GET(PORT_MAP_MASK, val);
}
port_mask |= BIT(port);
@@ -1815,7 +1815,7 @@ mt7530_port_mdb_del(struct dsa_switch *ds, int port,
mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP);
if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL)) {
regmap_read(priv->regmap, MT7530_ATRD, &val);
- port_mask = (val >> PORT_MAP) & PORT_MAP_MASK;
+ port_mask = FIELD_GET(PORT_MAP_MASK, val);
}
port_mask &= ~BIT(port);
@@ -1923,7 +1923,7 @@ mt7530_hw_vlan_update(struct mt7530_priv *priv, u16 vid,
regmap_read(priv->regmap, MT7530_VAWD1, &val);
- entry->old_members = (val >> PORT_MEM_SHFT) & PORT_MEM_MASK;
+ entry->old_members = FIELD_GET(PORT_MEM_MASK, val);
/* Manipulate entry */
vlan_op(priv, entry);
@@ -2436,7 +2436,7 @@ mt7530_setup(struct dsa_switch *ds)
}
regmap_read(priv->regmap, MT7530_CREV, &id);
- id >>= CHIP_NAME_SHIFT;
+ id = FIELD_GET(CHIP_NAME_MASK, id);
if (id != MT7530_ID) {
dev_err(priv->dev, "chip %x can't be supported\n", id);
return -ENODEV;
@@ -2679,7 +2679,7 @@ mt7531_setup(struct dsa_switch *ds)
}
regmap_read(priv->regmap, MT7531_CREV, &id);
- id >>= CHIP_NAME_SHIFT;
+ id = FIELD_GET(CHIP_NAME_MASK, id);
if (id != MT7531_ID) {
dev_err(priv->dev, "chip %x can't be supported\n", id);
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index dd33b0df3419..abf19aa69520 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -6,6 +6,8 @@
#ifndef __MT7530_H
#define __MT7530_H
+#include <linux/bitfield.h>
+
#define MT7530_NUM_PORTS 7
#define MT7530_NUM_PHYS 5
#define MT7530_NUM_FDB_RECORDS 2048
@@ -146,19 +148,22 @@ enum mt753x_to_cpu_fw {
#define STATIC_ENT 3
#define MT7530_ATA2 0x78
#define ATA2_IVL BIT(15)
-#define ATA2_FID(x) (((x) & 0x7) << 12)
+#define ATA2_FID_MASK GENMASK(14, 12)
+#define ATA2_FID(x) FIELD_PREP(ATA2_FID_MASK, x)
/* Register for address table write data */
#define MT7530_ATWD 0x7c
/* Register for address table control */
#define MT7530_ATC 0x80
-#define ATC_HASH (((x) & 0xfff) << 16)
+#define ATC_HASH_MASK GENMASK(27, 16)
+#define ATC_HASH(x) FIELD_PREP(ATC_HASH_MASK, x)
#define ATC_BUSY BIT(15)
#define ATC_SRCH_END BIT(14)
#define ATC_SRCH_HIT BIT(13)
#define ATC_INVALID BIT(12)
-#define ATC_MAT(x) (((x) & 0xf) << 8)
+#define ATC_MAT_MASK GENMASK(11, 8)
+#define ATC_MAT(x) FIELD_PREP(ATC_MAT_MASK, x)
#define ATC_MAT_MACTAB ATC_MAT(0)
enum mt7530_fdb_cmd {
@@ -171,32 +176,29 @@ enum mt7530_fdb_cmd {
/* Registers for table search read address */
#define MT7530_TSRA1 0x84
-#define MAC_BYTE_0 24
-#define MAC_BYTE_1 16
-#define MAC_BYTE_2 8
-#define MAC_BYTE_3 0
-#define MAC_BYTE_MASK 0xff
+#define MAC_BYTE_0_MASK GENMASK(31, 24)
+#define MAC_BYTE_1_MASK GENMASK(23, 16)
+#define MAC_BYTE_2_MASK GENMASK(15, 8)
+#define MAC_BYTE_3_MASK GENMASK(7, 0)
#define MT7530_TSRA2 0x88
-#define MAC_BYTE_4 24
-#define MAC_BYTE_5 16
-#define CVID 0
-#define CVID_MASK 0xfff
+#define MAC_BYTE_4_MASK GENMASK(31, 24)
+#define MAC_BYTE_5_MASK GENMASK(23, 16)
+#define CVID_MASK GENMASK(11, 0)
#define MT7530_ATRD 0x8C
-#define AGE_TIMER 24
-#define AGE_TIMER_MASK 0xff
-#define PORT_MAP 4
-#define PORT_MAP_MASK 0xff
-#define ENT_STATUS 2
-#define ENT_STATUS_MASK 0x3
+#define AGE_TIMER_RD_MASK GENMASK(31, 24)
+#define PORT_MAP_MASK GENMASK(11, 4)
+#define ENT_STATUS_MASK GENMASK(3, 2)
/* Register for vlan table control */
#define MT7530_VTCR 0x90
#define VTCR_BUSY BIT(31)
#define VTCR_INVALID BIT(16)
-#define VTCR_FUNC(x) (((x) & 0xf) << 12)
-#define VTCR_VID ((x) & 0xfff)
+#define VTCR_FUNC_MASK GENMASK(15, 12)
+#define VTCR_FUNC(x) FIELD_PREP(VTCR_FUNC_MASK, x)
+#define VTCR_VID_MASK GENMASK(11, 0)
+#define VTCR_VID(x) FIELD_PREP(VTCR_VID_MASK, x)
enum mt7530_vlan_cmd {
/* Read/Write the specified VID entry from VAWD register based
@@ -216,13 +218,13 @@ enum mt7530_vlan_cmd {
/* Per VLAN Egress Tag Control */
#define VTAG_EN BIT(28)
/* VLAN Member Control */
-#define PORT_MEM(x) (((x) & 0xff) << 16)
+#define PORT_MEM_MASK GENMASK(23, 16)
+#define PORT_MEM(x) FIELD_PREP(PORT_MEM_MASK, x)
/* Filter ID */
-#define FID(x) (((x) & 0x7) << 1)
+#define FID_MASK GENMASK(3, 1)
+#define FID(x) FIELD_PREP(FID_MASK, x)
/* VLAN Entry Valid */
#define VLAN_VALID BIT(0)
-#define PORT_MEM_SHFT 16
-#define PORT_MEM_MASK 0xff
enum mt7530_fid {
FID_STANDALONE = 0,
@@ -247,11 +249,11 @@ enum mt7530_vlan_egress_attr {
/* Age count */
#define AGE_CNT_MASK GENMASK(19, 12)
#define AGE_CNT_MAX 0xff
-#define AGE_CNT(x) (AGE_CNT_MASK & ((x) << 12))
+#define AGE_CNT(x) FIELD_PREP(AGE_CNT_MASK, x)
/* Age unit */
#define AGE_UNIT_MASK GENMASK(11, 0)
#define AGE_UNIT_MAX 0xfff
-#define AGE_UNIT(x) (AGE_UNIT_MASK & (x))
+#define AGE_UNIT(x) FIELD_PREP(AGE_UNIT_MASK, x)
#define MT753X_ERLCR_P(x) (0x1040 + ((x) * 0x100))
#define ERLCR_CIR_MASK GENMASK(31, 16)
@@ -282,30 +284,31 @@ enum mt7530_stp_state {
#define MT7530_PCR_P(x) (0x2004 + ((x) * 0x100))
#define PORT_TX_MIR BIT(9)
#define PORT_RX_MIR BIT(8)
-#define PORT_VLAN(x) ((x) & 0x3)
+#define PCR_PORT_VLAN_MASK GENMASK(1, 0)
enum mt7530_port_mode {
/* Port Matrix Mode: Frames are forwarded by the PCR_MATRIX members. */
- MT7530_PORT_MATRIX_MODE = PORT_VLAN(0),
+ MT7530_PORT_MATRIX_MODE = 0,
/* Fallback Mode: Forward received frames with ingress ports that do
* not belong to the VLAN member. Frames whose VID is not listed on
* the VLAN table are forwarded by the PCR_MATRIX members.
*/
- MT7530_PORT_FALLBACK_MODE = PORT_VLAN(1),
+ MT7530_PORT_FALLBACK_MODE = 1,
/* Security Mode: Discard any frame due to ingress membership
* violation or VID missed on the VLAN table.
*/
- MT7530_PORT_SECURITY_MODE = PORT_VLAN(3),
+ MT7530_PORT_SECURITY_MODE = 3,
};
-#define PCR_MATRIX(x) (((x) & 0xff) << 16)
-#define PORT_PRI(x) (((x) & 0x7) << 24)
-#define EG_TAG(x) (((x) & 0x3) << 28)
-#define PCR_MATRIX_MASK PCR_MATRIX(0xff)
+#define PCR_MATRIX_MASK GENMASK(23, 16)
+#define PCR_MATRIX(x) FIELD_PREP(PCR_MATRIX_MASK, x)
+#define PORT_PRI_MASK GENMASK(26, 24)
+#define PORT_PRI(x) FIELD_PREP(PORT_PRI_MASK, x)
+#define EG_TAG_MASK GENMASK(29, 28)
+#define EG_TAG(x) FIELD_PREP(EG_TAG_MASK, x)
#define PCR_MATRIX_CLR PCR_MATRIX(0)
-#define PCR_PORT_VLAN_MASK PORT_VLAN(3)
/* Register for port security control */
#define MT7530_PSC_P(x) (0x200c + ((x) * 0x100))
@@ -314,10 +317,10 @@ enum mt7530_port_mode {
/* Register for port vlan control */
#define MT7530_PVC_P(x) (0x2010 + ((x) * 0x100))
#define PORT_SPEC_TAG BIT(5)
-#define PVC_EG_TAG(x) (((x) & 0x7) << 8)
-#define PVC_EG_TAG_MASK PVC_EG_TAG(7)
-#define VLAN_ATTR(x) (((x) & 0x3) << 6)
-#define VLAN_ATTR_MASK VLAN_ATTR(3)
+#define PVC_EG_TAG_MASK GENMASK(10, 8)
+#define PVC_EG_TAG(x) FIELD_PREP(PVC_EG_TAG_MASK, x)
+#define VLAN_ATTR_MASK GENMASK(7, 6)
+#define VLAN_ATTR(x) FIELD_PREP(VLAN_ATTR_MASK, x)
#define ACC_FRM_MASK GENMASK(1, 0)
enum mt7530_vlan_port_eg_tag {
@@ -337,12 +340,13 @@ enum mt7530_vlan_port_acc_frm {
MT7530_VLAN_ACC_UNTAGGED = 2,
};
-#define STAG_VPID (((x) & 0xffff) << 16)
+#define STAG_VPID_MASK GENMASK(31, 16)
+#define STAG_VPID(x) FIELD_PREP(STAG_VPID_MASK, x)
/* Register for port port-and-protocol based vlan 1 control */
#define MT7530_PPBV1_P(x) (0x2014 + ((x) * 0x100))
-#define G0_PORT_VID(x) (((x) & 0xfff) << 0)
-#define G0_PORT_VID_MASK G0_PORT_VID(0xfff)
+#define G0_PORT_VID_MASK GENMASK(11, 0)
+#define G0_PORT_VID(x) FIELD_PREP(G0_PORT_VID_MASK, x)
#define G0_PORT_VID_DEF G0_PORT_VID(0)
/* Register for port MAC control register */
@@ -418,8 +422,8 @@ enum mt7530_vlan_port_acc_frm {
#define MT7531_DIS_CLR BIT(31)
#define MT7530_GMACCR 0x30e0
-#define MAX_RX_JUMBO(x) ((x) << 2)
#define MAX_RX_JUMBO_MASK GENMASK(5, 2)
+#define MAX_RX_JUMBO(x) FIELD_PREP(MAX_RX_JUMBO_MASK, x)
#define MAX_RX_PKT_LEN_MASK GENMASK(1, 0)
#define MAX_RX_PKT_LEN_1522 0x0
#define MAX_RX_PKT_LEN_1536 0x1
@@ -505,16 +509,16 @@ enum mt7530_vlan_port_acc_frm {
/* Register for PHY Indirect Access Control */
#define MT7531_PHY_IAC 0x701C
#define MT7531_PHY_ACS_ST BIT(31)
-#define MT7531_MDIO_REG_ADDR_MASK (0x1f << 25)
-#define MT7531_MDIO_PHY_ADDR_MASK (0x1f << 20)
-#define MT7531_MDIO_CMD_MASK (0x3 << 18)
-#define MT7531_MDIO_ST_MASK (0x3 << 16)
-#define MT7531_MDIO_RW_DATA_MASK (0xffff)
-#define MT7531_MDIO_REG_ADDR(x) (((x) & 0x1f) << 25)
-#define MT7531_MDIO_DEV_ADDR(x) (((x) & 0x1f) << 25)
-#define MT7531_MDIO_PHY_ADDR(x) (((x) & 0x1f) << 20)
-#define MT7531_MDIO_CMD(x) (((x) & 0x3) << 18)
-#define MT7531_MDIO_ST(x) (((x) & 0x3) << 16)
+#define MT7531_MDIO_REG_ADDR_MASK GENMASK(29, 25)
+#define MT7531_MDIO_PHY_ADDR_MASK GENMASK(24, 20)
+#define MT7531_MDIO_CMD_MASK GENMASK(19, 18)
+#define MT7531_MDIO_ST_MASK GENMASK(17, 16)
+#define MT7531_MDIO_RW_DATA_MASK GENMASK(15, 0)
+#define MT7531_MDIO_REG_ADDR(x) FIELD_PREP(MT7531_MDIO_REG_ADDR_MASK, x)
+#define MT7531_MDIO_DEV_ADDR(x) FIELD_PREP(MT7531_MDIO_REG_ADDR_MASK, x)
+#define MT7531_MDIO_PHY_ADDR(x) FIELD_PREP(MT7531_MDIO_PHY_ADDR_MASK, x)
+#define MT7531_MDIO_CMD(x) FIELD_PREP(MT7531_MDIO_CMD_MASK, x)
+#define MT7531_MDIO_ST(x) FIELD_PREP(MT7531_MDIO_ST_MASK, x)
enum mt7531_phy_iac_cmd {
MT7531_MDIO_ADDR = 0,
@@ -542,14 +546,14 @@ enum mt7531_mdio_st {
/* Register for RGMII clock phase */
#define MT7531_CLKGEN_CTRL 0x7500
-#define CLK_SKEW_OUT(x) (((x) & 0x3) << 8)
#define CLK_SKEW_OUT_MASK GENMASK(9, 8)
-#define CLK_SKEW_IN(x) (((x) & 0x3) << 6)
+#define CLK_SKEW_OUT(x) FIELD_PREP(CLK_SKEW_OUT_MASK, x)
#define CLK_SKEW_IN_MASK GENMASK(7, 6)
+#define CLK_SKEW_IN(x) FIELD_PREP(CLK_SKEW_IN_MASK, x)
#define RXCLK_NO_DELAY BIT(5)
#define TXCLK_NO_REVERSE BIT(4)
-#define GP_MODE(x) (((x) & 0x3) << 1)
#define GP_MODE_MASK GENMASK(2, 1)
+#define GP_MODE(x) FIELD_PREP(GP_MODE_MASK, x)
#define GP_CLK_EN BIT(0)
enum mt7531_gp_mode {
@@ -599,8 +603,10 @@ enum mt7531_xtal_fsel {
#define PAD_MCM_SMI_EN BIT(0)
#define MT7530_IO_DRV_CR 0x7810
-#define P5_IO_CLK_DRV(x) ((x) & 0x3)
-#define P5_IO_DATA_DRV(x) (((x) & 0x3) << 4)
+#define P5_IO_CLK_DRV_MASK GENMASK(1, 0)
+#define P5_IO_CLK_DRV(x) FIELD_PREP(P5_IO_CLK_DRV_MASK, x)
+#define P5_IO_DATA_DRV_MASK GENMASK(5, 4)
+#define P5_IO_DATA_DRV(x) FIELD_PREP(P5_IO_DATA_DRV_MASK, x)
#define MT7531_CHIP_REV 0x781C
@@ -610,15 +616,15 @@ enum mt7531_xtal_fsel {
#define SW_PLLGP BIT(0)
#define MT7530_P6ECR 0x7830
-#define P6_INTF_MODE_MASK 0x3
-#define P6_INTF_MODE(x) ((x) & 0x3)
+#define P6_INTF_MODE_MASK GENMASK(1, 0)
+#define P6_INTF_MODE(x) FIELD_PREP(P6_INTF_MODE_MASK, x)
#define MT7531_PLLGP_CR0 0x78a8
#define RG_COREPLL_EN BIT(22)
-#define RG_COREPLL_POSDIV_S 23
-#define RG_COREPLL_POSDIV_M 0x3800000
-#define RG_COREPLL_SDM_PCW_S 1
-#define RG_COREPLL_SDM_PCW_M 0x3ffffe
+#define RG_COREPLL_POSDIV_MASK GENMASK(25, 23)
+#define RG_COREPLL_POSDIV(x) FIELD_PREP(RG_COREPLL_POSDIV_MASK, x)
+#define RG_COREPLL_SDM_PCW_MASK GENMASK(21, 1)
+#define RG_COREPLL_SDM_PCW(x) FIELD_PREP(RG_COREPLL_SDM_PCW_MASK, x)
#define RG_COREPLL_SDM_PCW_CHG BIT(0)
/* Registers for RGMII and SGMII PLL clock */
@@ -629,10 +635,10 @@ enum mt7531_xtal_fsel {
#define MT7530_TRGMII_RCK_CTRL 0x7a00
#define RX_RST BIT(31)
#define RXC_DQSISEL BIT(30)
-#define DQSI1_TAP_MASK (0x7f << 8)
-#define DQSI0_TAP_MASK 0x7f
-#define DQSI1_TAP(x) (((x) & 0x7f) << 8)
-#define DQSI0_TAP(x) ((x) & 0x7f)
+#define DQSI1_TAP_MASK GENMASK(14, 8)
+#define DQSI0_TAP_MASK GENMASK(6, 0)
+#define DQSI1_TAP(x) FIELD_PREP(DQSI1_TAP_MASK, x)
+#define DQSI0_TAP(x) FIELD_PREP(DQSI0_TAP_MASK, x)
#define MT7530_TRGMII_RCK_RTT 0x7a04
#define DQS1_GATE BIT(31)
@@ -641,8 +647,8 @@ enum mt7531_xtal_fsel {
#define MT7530_TRGMII_RD(x) (0x7a10 + (x) * 8)
#define BSLIP_EN BIT(31)
#define EDGE_CHK BIT(30)
-#define RD_TAP_MASK 0x7f
-#define RD_TAP(x) ((x) & 0x7f)
+#define RD_TAP_MASK GENMASK(6, 0)
+#define RD_TAP(x) FIELD_PREP(RD_TAP_MASK, x)
#define MT7530_TRGMII_TXCTRL 0x7a40
#define TRAIN_TXEN BIT(31)
@@ -650,18 +656,23 @@ enum mt7531_xtal_fsel {
#define TX_RST BIT(28)
#define MT7530_TRGMII_TD_ODT(i) (0x7a54 + 8 * (i))
-#define TD_DM_DRVP(x) ((x) & 0xf)
-#define TD_DM_DRVN(x) (((x) & 0xf) << 4)
+#define TD_DM_DRVP_MASK GENMASK(3, 0)
+#define TD_DM_DRVP(x) FIELD_PREP(TD_DM_DRVP_MASK, x)
+#define TD_DM_DRVN_MASK GENMASK(7, 4)
+#define TD_DM_DRVN(x) FIELD_PREP(TD_DM_DRVN_MASK, x)
#define MT7530_TRGMII_TCK_CTRL 0x7a78
-#define TCK_TAP(x) (((x) & 0xf) << 8)
+#define TCK_TAP_MASK GENMASK(11, 8)
+#define TCK_TAP(x) FIELD_PREP(TCK_TAP_MASK, x)
#define MT7530_P5RGMIIRXCR 0x7b00
#define CSR_RGMII_EDGE_ALIGN BIT(8)
-#define CSR_RGMII_RXC_0DEG_CFG(x) ((x) & 0xf)
+#define CSR_RGMII_RXC_0DEG_CFG_MASK GENMASK(3, 0)
+#define CSR_RGMII_RXC_0DEG_CFG(x) FIELD_PREP(CSR_RGMII_RXC_0DEG_CFG_MASK, x)
#define MT7530_P5RGMIITXCR 0x7b04
-#define CSR_RGMII_TXC_CFG(x) ((x) & 0x1f)
+#define CSR_RGMII_TXC_CFG_MASK GENMASK(4, 0)
+#define CSR_RGMII_TXC_CFG(x) FIELD_PREP(CSR_RGMII_TXC_CFG_MASK, x)
/* Registers for GPIO mode */
#define MT7531_GPIO_MODE0 0x7c0c
@@ -670,9 +681,9 @@ enum mt7531_xtal_fsel {
#define MT7531_GPIO_MODE1 0x7c10
#define MT7531_GPIO11_RG_RXD2_MASK GENMASK(15, 12)
-#define MT7531_EXT_P_MDC_11 (2 << 12)
+#define MT7531_EXT_P_MDC_11 FIELD_PREP(MT7531_GPIO11_RG_RXD2_MASK, 2)
#define MT7531_GPIO12_RG_RXD3_MASK GENMASK(19, 16)
-#define MT7531_EXT_P_MDIO_12 (2 << 16)
+#define MT7531_EXT_P_MDIO_12 FIELD_PREP(MT7531_GPIO12_RG_RXD3_MASK, 2)
#define MT753X_CPORT_SPTAG_CFG 0x7c10
#define CPORT_SW2FE_STAG_EN BIT(1)
@@ -704,7 +715,7 @@ enum mt7531_xtal_fsel {
#define MT7530_LED_GPIO_DATA 0x7d18
#define MT7530_CREV 0x7ffc
-#define CHIP_NAME_SHIFT 16
+#define CHIP_NAME_MASK GENMASK(31, 16)
#define MT7530_ID 0x7530
#define MT7531_CREV 0x781C
@@ -716,10 +727,13 @@ enum mt7531_xtal_fsel {
#define RG_SYSPLL_EN_NORMAL BIT(15)
#define RG_SYSPLL_VODEN BIT(14)
#define RG_SYSPLL_LF BIT(13)
-#define RG_SYSPLL_RST_DLY(x) (((x) & 0x3) << 12)
+#define RG_SYSPLL_RST_DLY_MASK GENMASK(13, 12)
+#define RG_SYSPLL_RST_DLY(x) FIELD_PREP(RG_SYSPLL_RST_DLY_MASK, x)
#define RG_SYSPLL_LVROD_EN BIT(10)
-#define RG_SYSPLL_PREDIV(x) (((x) & 0x3) << 8)
-#define RG_SYSPLL_POSDIV(x) (((x) & 0x3) << 5)
+#define RG_SYSPLL_PREDIV_MASK GENMASK(9, 8)
+#define RG_SYSPLL_PREDIV(x) FIELD_PREP(RG_SYSPLL_PREDIV_MASK, x)
+#define RG_SYSPLL_POSDIV_MASK GENMASK(6, 5)
+#define RG_SYSPLL_POSDIV(x) FIELD_PREP(RG_SYSPLL_POSDIV_MASK, x)
#define RG_SYSPLL_FBKSEL BIT(4)
#define RT_SYSPLL_EN_AFE_OLT BIT(0)
@@ -731,38 +745,48 @@ enum mt7531_xtal_fsel {
#define MT7531_PHY_PLL_OFF BIT(5)
#define MT7531_PHY_PLL_BYPASS_MODE BIT(4)
-#define MT753X_CTRL_PHY_ADDR(addr) ((addr + 1) & 0x1f)
+#define MT753X_CTRL_PHY_ADDR(addr) (((addr) + 1) & (PHY_MAX_ADDR - 1))
#define CORE_PLL_GROUP5 0x404
-#define RG_LCDDS_PCW_NCPO1(x) ((x) & 0xffff)
+#define RG_LCDDS_PCW_NCPO1_MASK GENMASK(15, 0)
+#define RG_LCDDS_PCW_NCPO1(x) FIELD_PREP(RG_LCDDS_PCW_NCPO1_MASK, x)
#define CORE_PLL_GROUP6 0x405
-#define RG_LCDDS_PCW_NCPO0(x) ((x) & 0xffff)
+#define RG_LCDDS_PCW_NCPO0_MASK GENMASK(15, 0)
+#define RG_LCDDS_PCW_NCPO0(x) FIELD_PREP(RG_LCDDS_PCW_NCPO0_MASK, x)
#define CORE_PLL_GROUP7 0x406
#define RG_LCDDS_PWDB BIT(15)
#define RG_LCDDS_ISO_EN BIT(13)
-#define RG_LCCDS_C(x) (((x) & 0x7) << 4)
+#define RG_LCCDS_C_MASK GENMASK(6, 4)
+#define RG_LCCDS_C(x) FIELD_PREP(RG_LCCDS_C_MASK, x)
#define RG_LCDDS_PCW_NCPO_CHG BIT(3)
#define CORE_PLL_GROUP10 0x409
-#define RG_LCDDS_SSC_DELTA(x) ((x) & 0xfff)
+#define RG_LCDDS_SSC_DELTA_MASK GENMASK(11, 0)
+#define RG_LCDDS_SSC_DELTA(x) FIELD_PREP(RG_LCDDS_SSC_DELTA_MASK, x)
#define CORE_PLL_GROUP11 0x40a
-#define RG_LCDDS_SSC_DELTA1(x) ((x) & 0xfff)
+#define RG_LCDDS_SSC_DELTA1_MASK GENMASK(11, 0)
+#define RG_LCDDS_SSC_DELTA1(x) FIELD_PREP(RG_LCDDS_SSC_DELTA1_MASK, x)
#define CORE_GSWPLL_GRP1 0x40d
-#define RG_GSWPLL_PREDIV(x) (((x) & 0x3) << 14)
-#define RG_GSWPLL_POSDIV_200M(x) (((x) & 0x3) << 12)
+#define RG_GSWPLL_PREDIV_MASK GENMASK(15, 14)
+#define RG_GSWPLL_PREDIV(x) FIELD_PREP(RG_GSWPLL_PREDIV_MASK, x)
+#define RG_GSWPLL_POSDIV_200M_MASK GENMASK(13, 12)
+#define RG_GSWPLL_POSDIV_200M(x) FIELD_PREP(RG_GSWPLL_POSDIV_200M_MASK, x)
#define RG_GSWPLL_EN_PRE BIT(11)
#define RG_GSWPLL_FBKSEL BIT(10)
#define RG_GSWPLL_BP BIT(9)
#define RG_GSWPLL_BR BIT(8)
-#define RG_GSWPLL_FBKDIV_200M(x) ((x) & 0xff)
+#define RG_GSWPLL_FBKDIV_200M_MASK GENMASK(7, 0)
+#define RG_GSWPLL_FBKDIV_200M(x) FIELD_PREP(RG_GSWPLL_FBKDIV_200M_MASK, x)
#define CORE_GSWPLL_GRP2 0x40e
-#define RG_GSWPLL_POSDIV_500M(x) (((x) & 0x3) << 8)
-#define RG_GSWPLL_FBKDIV_500M(x) ((x) & 0xff)
+#define RG_GSWPLL_POSDIV_500M_MASK GENMASK(9, 8)
+#define RG_GSWPLL_POSDIV_500M(x) FIELD_PREP(RG_GSWPLL_POSDIV_500M_MASK, x)
+#define RG_GSWPLL_FBKDIV_500M_MASK GENMASK(7, 0)
+#define RG_GSWPLL_FBKDIV_500M(x) FIELD_PREP(RG_GSWPLL_FBKDIV_500M_MASK, x)
#define CORE_TRGMII_GSW_CLK_CG 0x410
#define REG_GSWCK_EN BIT(0)
--
2.54.0
^ permalink raw reply related
* [PATCH net-next v2 7/8] net: dsa: mt7530: implement port_fast_age
From: Daniel Golle @ 2026-06-13 1:11 UTC (permalink / raw)
To: Chester A. Unal, Daniel Golle, Andrew Lunn, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Matthias Brugger, AngeloGioacchino Del Regno, Russell King,
netdev, linux-kernel, linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1781312667.git.daniel@makrotopia.org>
Implement the .port_fast_age DSA operation by flushing all non-static
(dynamically learned) MAC address entries from the address table.
The switch does not offer a combined "non-static AND per-port" match
mode, so flush all dynamic entries globally. This is consistent with
what other DSA drivers do (b53, realtek) and relearning is fast.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: no changes
drivers/net/dsa/mt7530.c | 16 ++++++++++++++++
drivers/net/dsa/mt7530.h | 1 +
2 files changed, 17 insertions(+)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index dcf72ab0cd66..c96420c291d5 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -193,6 +193,21 @@ mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp)
return 0;
}
+static void mt7530_port_fast_age(struct dsa_switch *ds, int port)
+{
+ struct mt7530_priv *priv = ds->priv;
+ struct mt7530_dummy_poll p;
+ u32 val;
+
+ /* Flush all non-static MAC address entries */
+ val = ATC_BUSY | ATC_MAT_NON_STATIC_MAC | MT7530_FDB_FLUSH;
+ regmap_write(priv->regmap, MT7530_ATC, val);
+
+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_ATC);
+ readx_poll_timeout(mt7530_mii_poll, &p, val,
+ !(val & ATC_BUSY), 20, 20000);
+}
+
static void
mt7530_fdb_read(struct mt7530_priv *priv, struct mt7530_fdb *fdb)
{
@@ -3319,6 +3334,7 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
.port_bridge_flags = mt7530_port_bridge_flags,
.port_bridge_join = mt7530_port_bridge_join,
.port_bridge_leave = mt7530_port_bridge_leave,
+ .port_fast_age = mt7530_port_fast_age,
.port_fdb_add = mt7530_port_fdb_add,
.port_fdb_del = mt7530_port_fdb_del,
.port_fdb_dump = mt7530_port_fdb_dump,
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index abf19aa69520..decad7a93dbd 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -165,6 +165,7 @@ enum mt753x_to_cpu_fw {
#define ATC_MAT_MASK GENMASK(11, 8)
#define ATC_MAT(x) FIELD_PREP(ATC_MAT_MASK, x)
#define ATC_MAT_MACTAB ATC_MAT(0)
+#define ATC_MAT_NON_STATIC_MAC ATC_MAT(4)
enum mt7530_fdb_cmd {
MT7530_FDB_READ = 0,
--
2.54.0
^ permalink raw reply related
* [PATCH net-next v2 8/8] net: dsa: mt7530: implement port_change_conduit op
From: Daniel Golle @ 2026-06-13 1:11 UTC (permalink / raw)
To: Chester A. Unal, Daniel Golle, Andrew Lunn, Vladimir Oltean,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Matthias Brugger, AngeloGioacchino Del Regno, Russell King,
netdev, linux-kernel, linux-arm-kernel, linux-mediatek
In-Reply-To: <cover.1781312667.git.daniel@makrotopia.org>
Allow changing the CPU port affinity of user ports at runtime via the
IFLA_DSA_CONDUIT netlink attribute. This updates the port matrix to
forward to the new CPU port instead of the old one.
Limit the operation to MT7531. There, trapped link-local frames follow
the per-port affinity, as the MT7531_CPU_PMAP destination mask is
further restricted by the port matrix. A conduit change is hence fully
honoured by the hardware, for regular traffic as well as for trapped
frames.
The MT7530 switch, including the variant embedded in the MT7621 SoC,
instead traps frames to the single CPU port set in the CPU_PORT field
of the MFC register, regardless of the affinity of the inbound user
port. With user ports affine to different CPU ports there is no
correct value for that field, so per-port CPU affinity cannot be fully
implemented for trapped frames. Routing a WAN port via the second SoC
GMAC is conventionally covered by the PHY muxing feature on these
switches, which bypasses the switch fabric and does not involve a CPU
port at all.
The switches on the MT7988, EN7581 and AN7583 SoCs only have a
single CPU port, leaving no other conduit to change to.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: extend commit message
drivers/net/dsa/mt7530.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index c96420c291d5..2f3e734b9f53 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -3206,6 +3206,34 @@ static int mt753x_set_mac_eee(struct dsa_switch *ds, int port,
return 0;
}
+static int
+mt753x_port_change_conduit(struct dsa_switch *ds, int port,
+ struct net_device *conduit,
+ struct netlink_ext_ack *extack)
+{
+ struct dsa_port *new_cpu_dp = conduit->dsa_ptr;
+ struct dsa_port *dp = dsa_to_port(ds, port);
+ struct mt7530_priv *priv = ds->priv;
+
+ if (priv->id != ID_MT7531)
+ return -EOPNOTSUPP;
+
+ mutex_lock(&priv->reg_mutex);
+
+ /* dp->cpu_dp still points to the old CPU port */
+ priv->ports[port].pm &= ~PCR_MATRIX(BIT(dp->cpu_dp->index));
+ priv->ports[port].pm |= PCR_MATRIX(BIT(new_cpu_dp->index));
+ if (priv->ports[port].enable)
+ regmap_update_bits(priv->regmap, MT7530_PCR_P(port),
+ PCR_MATRIX_MASK, priv->ports[port].pm);
+
+ mutex_unlock(&priv->reg_mutex);
+
+ mt7530_port_fast_age(ds, port);
+
+ return 0;
+}
+
static void
mt753x_conduit_state_change(struct dsa_switch *ds,
const struct net_device *conduit,
@@ -3317,6 +3345,7 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
.setup = mt753x_setup,
.teardown = mt753x_teardown,
.preferred_default_local_cpu_port = mt753x_preferred_default_local_cpu_port,
+ .port_change_conduit = mt753x_port_change_conduit,
.get_strings = mt7530_get_strings,
.get_ethtool_stats = mt7530_get_ethtool_stats,
.get_sset_count = mt7530_get_sset_count,
--
2.54.0
^ permalink raw reply related
* Re: [PATCH v7 04/30] drm/display: scdc_helper: Add HDMI 2.0 scrambling management helpers
From: Cristian Ciocaltea @ 2026-06-13 1:30 UTC (permalink / raw)
To: Maxime Ripard
Cc: Maarten Lankhorst, Thomas Zimmermann, David Airlie, Simona Vetter,
Andrzej Hajda, Neil Armstrong, Robert Foss, Laurent Pinchart,
Jonas Karlman, Jernej Skrabec, Luca Ceresoli, Sandy Huang,
Heiko Stübner, Andy Yan, Daniel Stone, Dave Stevenson,
Maíra Canal, Raspberry Pi Kernel Maintenance, kernel,
dri-devel, linux-kernel, linux-arm-kernel, linux-rockchip
In-Reply-To: <20260612-cordial-steadfast-cow-fcaf01@houat>
On 6/12/26 4:43 PM, Maxime Ripard wrote:
> On Tue, Jun 02, 2026 at 01:44:04AM +0300, Cristian Ciocaltea wrote:
>> +/**
>> + * drm_scdc_start_scrambling - activate scrambling and monitor SCDC status
>> + * @connector: connector
>> + *
>> + * Enables scrambling and high TMDS clock ratio on both source and sink sides.
>> + * Additionally, use a delayed work item to monitor the scrambling status on
>> + * the sink side and retry the operation, as some displays refuse to set the
>> + * scrambling bit right away.
>> + *
>> + * Returns:
>> + * Zero if scrambling is set successfully, an error code otherwise.
>> + */
>> +int drm_scdc_start_scrambling(struct drm_connector *connector)
>> +{
>> + struct drm_display_info *info = &connector->display_info;
>> + struct drm_connector_hdmi *hdmi = &connector->hdmi;
>> + int ret;
>> + u8 ver;
>> +
>> + if (!hdmi->scrambler_supported) {
>> + drm_scdc_dbg(connector, "Scrambler not supported, bailing.\n");
>> + return -EINVAL;
>> + }
>> +
>> + if (!info->is_hdmi ||
>> + !info->hdmi.scdc.supported ||
>> + !info->hdmi.scdc.scrambling.supported) {
>> + drm_scdc_dbg(connector, "Sink doesn't support scrambling.\n");
>> + return -EINVAL;
>> + }
>> +
>> + drm_scdc_dbg(connector, "Enabling scrambling\n");
>> +
>> + ret = drm_scdc_readb(connector->ddc, SCDC_SINK_VERSION, &ver);
>> + if (ret) {
>> + drm_scdc_dbg(connector, "Failed to read SCDC_SINK_VERSION: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = drm_scdc_writeb(connector->ddc, SCDC_SOURCE_VERSION,
>> + min_t(u8, ver, SCDC_MAX_SOURCE_VERSION));
>> + if (ret) {
>> + drm_scdc_dbg(connector, "Failed to write SCDC_SOURCE_VERSION: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + hdmi->scdc_cb = drm_scdc_monitor_scrambler;
>> + WRITE_ONCE(hdmi->scrambler_enabled, true);
>> +
>> + ret = drm_scdc_try_scrambling_setup(connector);
>> + if (!ret)
>> + ret = hdmi->funcs->scrambler_enable(connector);
>> +
>> + if (ret) {
>> + WRITE_ONCE(hdmi->scrambler_enabled, false);
>> + cancel_delayed_work_sync(&hdmi->scdc_work);
>> + hdmi->scdc_cb = NULL;
>> +
>> + drm_scdc_set_scrambling(connector, false);
>> + drm_scdc_set_high_tmds_clock_ratio(connector, false);
>> + }
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL(drm_scdc_start_scrambling);
>
> This is also pretty significantly different than what vc4 implemented. I
> don't necessarily mind, but claiming that it's functionally equivalent
> isn't true. I think it would be a much better strategy to turn the vc4
> code into helpers as is because it's been merged 4 years ago and we know
> it's solid.
As explained in patch 25, I think there's been a slight misunderstanding of how
the CRTC reset logic was actually implemented.
> Then, if you want to add additional checks and constraints (like the
> SCDC_SINK_VERSION) that's fine, but it should come on top, and with its
> own explanation.
I'll recheck if there's anything that I might have missed from the original
implementation, while moving the additional changes to separate patch(es).
Thanks,
Cristian
^ permalink raw reply
* [PATCH v8 next 04/10 Resend] arm_mpam: Refactor rmid to reqPARTID/PMG mapping
From: Zeng Heng @ 2026-06-13 2:57 UTC (permalink / raw)
To: James Morse, ben.horgan, Dave.Martin, tan.shaopeng,
reinette.chatre, fenghuay, tglx, will, hpa, bp, babu.moger,
dave.hansen, mingo, tony.luck, gshan, catalin.marinas
Cc: linux-arm-kernel, x86, linux-kernel, Kefeng Wang
In-Reply-To: <924fbfbc-995f-e291-8849-efcb8e01ef98@huawei.com>
Hi James,
Resent from huaweicloud email to avoid being filtered as spam.
----------
>> @@ -478,6 +518,7 @@ static int __read_mon(struct mpam_resctrl_mon *mon, struct mpam_component *mon_c
>> enum resctrl_conf_type cdp_type, u32 closid, u32 rmid, u64 *val)
>> {
>> struct mon_cfg cfg;
>> + u32 reqpartid = rmid2reqpartid(rmid);
>>
>> if (!mpam_is_enabled())
>> return -EINVAL;
>> @@ -493,8 +534,8 @@ static int __read_mon(struct mpam_resctrl_mon *mon, struct mpam_component *mon_c
>> cfg = (struct mon_cfg) {
>> .mon = mon_idx,
>> .match_pmg = true,
>> - .partid = closid,
>> - .pmg = rmid,
>> + .partid = (cdp_type == CDP_CODE) ? reqpartid + 1 : reqpartid,
>> + .pmg = rmid2pmg(rmid),
>
> Not using the CLOSID here breaks multiple control groups.
>
After carefully reviewing your comments and Martin's patch series,
I tried to understand why there is insistence that CLOSID information
is necessary to support multiple control groups, but that is actually
not the case.
Before proceeding, please allow me to refer to base_partid as CPARTID
(control partition ID; I'm no longer borrowing the intPARTID concept
here). The associated partids_per_closid all share the same control
scheme.
The partids derived from partids_per_closid under a given CPARTID,
I will call MPARTID (monitor partition ID; no longer borrowing the
reqPARTID concept). These represent the PARTIDs used for different
monitoring groups under the same control scheme.
I've summarized the ID translation schemes from James and Martin as
follows:
+-------------------------------+------------------+
| CLOSID |{CDP}| RMID |
+-------------------------------+------------+-----+
| MPARTID | PMG |
| CPARTID(or MPARTID_hi) : MPARTID_lo | |
+--------------------------------------------+-----+
Where closid = cpartid (base_partid or mpartid_hi),
rmid = mpartid_lo * pmg_num + pmg,
with mpartid_lo in the range [0, partids_per_closid).
In this scheme, CLOSID and RMID are coupled together to form MPARTID,
which represents the monitor group PARTID.
In current patchset design, decoupling CLOSID and RMID, letting them
represent CPARTID and MPARTID respectively:
+---------------------------------------------+
| CLOSID |{CDP}|
+---------------------------------------------+
| CPARTID |
+---------------------------------------------+
+---------------------------------------------+
| RMID |
+---------------------------------------+-----+
| MPARTID | PMG |
| MPARTID_hi(or CPARTID) : MPARTID_lo | |
+---------------------------------------+-----+
Where closid = cpartid (base_partid or mpartid_hi),
rmid = mpartid * pmg_num + pmg,
and mpartid = mpartid_hi * partids_per_closid + mpartid_lo .
The design intent is to decouple CLOSID and RMID, rather than having
RMID depend on CLOSID to derive MPARTID. This decoupling is essential
for future dynamic allocation, because the relationship between MPARTID
and CPARTID must rely on table lookup rather than linear mapping. If
don't decouple in the static allocation design, we would need another
refactor when considering dynamic allocation extensibility.
The control path uses CLOSID alone (CPARTID), and the monitor path uses
RMID alone (the (MPARTID, PMG) pair). This definition also aligns
closely with the native resctrl concepts: CLOSID (Class of Service ID,
corresponding to CPARTID) and RMID (Resource Monitor ID, corresponding
to the (MPARTID, PMG) pair).
In the end, the number of control groups is determined by the number of
CPARTIDs. Both of these ID translation schemes support multiple control
groups.
Please allow me to rework the patch series into v9 based on my current
patches, incorporating your review feedback.
Best Regards,
Zeng Heng
^ permalink raw reply
* Re: [PATCH v2 3/7] arm64: dts: qcom: shikra: Add CAMSS node
From: Nihal Kumar Gupta @ 2026-06-13 4:10 UTC (permalink / raw)
To: Vladimir Zapolskiy, Bryan O'Donoghue, Loic Poulain,
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Robert Foss, Andi Shyti, Bryan O'Donoghue,
Bjorn Andersson, Konrad Dybcio, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam
Cc: linux-arm-msm, linux-media, devicetree, linux-kernel, linux-i2c,
imx, linux-arm-kernel, Suresh Vankadara, Vikram Sharma
In-Reply-To: <3ec2bd75-4d88-492e-a8c2-b21000ef2afc@linaro.org>
On 12-06-2026 13:26, Vladimir Zapolskiy wrote:
>> + iommus = <&apps_smmu 0x400 0x0>;
>> + power-domains = <&gcc GCC_CAMSS_TOP_GDSC>;
>
> Please add an empty line between the properties above.
>
>> +
ACK
--
Regards,
Nihal Kumar Gupta
^ permalink raw reply
* Re: [PATCH] net: correcting section tags for .init and .exit data/functions
From: kernel test robot @ 2026-06-13 4:34 UTC (permalink / raw)
To: xur, David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Simon Horman, Neal Cardwell, Kuniyuki Iwashima, Willem de Bruijn,
David Ahern, Ido Schimmel, Andreas Färber,
Manivannan Sadhasivam, Nathan Chancellor, Nick Desaulniers,
Bill Wendling, Justin Stitt, Maciej Żenczykowski,
Yue Haibing, Jeff Layton, Kees Cook, Fernando Fernandez Mancera,
Gustavo A. R. Silva, Sabrina Dubroca, Masahiro Yamada,
Nicolas Schier, linux-kernel, linux-arm-kernel, linux-actions
Cc: llvm, oe-kbuild-all, netdev
In-Reply-To: <20260612162257.896792-1-xur@google.com>
Hi,
kernel test robot noticed the following build warnings:
[auto build test WARNING on 2b414a95b8f7307d42173ba9e580d6d3e2bcbfce]
url: https://github.com/intel-lab-lkp/linux/commits/xur-google-com/net-correcting-section-tags-for-init-and-exit-data-functions/20260613-002737
base: 2b414a95b8f7307d42173ba9e580d6d3e2bcbfce
patch link: https://lore.kernel.org/r/20260612162257.896792-1-xur%40google.com
patch subject: [PATCH] net: correcting section tags for .init and .exit data/functions
config: loongarch-defconfig (https://download.01.org/0day-ci/archive/20260613/202606131256.P9NXJENl-lkp@intel.com/config)
compiler: clang version 23.0.0git (https://github.com/llvm/llvm-project 305faf498a4e0b52b40742c927af63ab2082e1a9)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260613/202606131256.P9NXJENl-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202606131256.P9NXJENl-lkp@intel.com/
All warnings (new ones prefixed by >>, old ones prefixed by <<):
>> WARNING: modpost: vmlinux: section mismatch in reference: tcpv6_init+0x74 (section: .text) -> mptcpv6_init (section: .init.text)
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply
* Re: [PATCH v2 6/7] arm64: dts: qcom: shikra-cqm-cqs-evk-imx577-camera: Add DT overlay
From: Nihal Kumar Gupta @ 2026-06-13 4:46 UTC (permalink / raw)
To: Vladimir Zapolskiy, Bryan O'Donoghue, Loic Poulain,
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Robert Foss, Andi Shyti, Bryan O'Donoghue,
Bjorn Andersson, Konrad Dybcio, Frank Li, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam
Cc: linux-arm-msm, linux-media, devicetree, linux-kernel, linux-i2c,
imx, linux-arm-kernel, Suresh Vankadara, Vikram Sharma
In-Reply-To: <b10ecb42-0d4f-4037-b786-cc52bcd1bdd6@linaro.org>
On 12-06-2026 13:40, Vladimir Zapolskiy wrote:
>> + imx577_ep1: endpoint {
>> + link-frequencies = /bits/ 64 <600000000>;
>> + data-lanes = <0 1 2 3>;
>
> The numeration of data-lanes shall be started from 1, this has to be fixed.
>
Thanks for pointing it.
Will fix in v3. On MIPI D-PHY, lane 0 is the clock lane, so data lanes
must start from 1 as per video-interfaces.yaml binding spec.
>> + remote-endpoint = <&csiphy1_ep>;
>> + };
>> + };
>> + };
>> +&tlmm {
>> + cam1_reset_default: cam1-reset-default-state {
>> + pins = "gpio33";
>> + function = "gpio";
>> + drive-strength = <2>;
>> + bias-disable;
>> + };
>> +};
>
> Since it's a mezzanine specific pinctl assignment, it shall go to the
> correspondent .dtso file.
>
> It's a concidence that one .dtso file is good enough for describing the
> mezzanine for two diffferent boards, but let's exploit it by keeping one
> dt overlay file as it is now.
Agreed, will move it to the .dtso in v3.
This also eliminates the identical cam1_reset_default block duplicated across
CQM and CQS board files.
Will incorporate this for the IQS dtso file.
--
Regards,
Nihal Kumar Gupta
^ permalink raw reply
* Re: [PATCH] net: correcting section tags for .init and .exit data/functions
From: kernel test robot @ 2026-06-13 4:57 UTC (permalink / raw)
To: xur, David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Simon Horman, Neal Cardwell, Kuniyuki Iwashima, Willem de Bruijn,
David Ahern, Ido Schimmel, Andreas Färber,
Manivannan Sadhasivam, Nathan Chancellor, Nick Desaulniers,
Bill Wendling, Justin Stitt, Maciej Żenczykowski,
Yue Haibing, Jeff Layton, Kees Cook, Fernando Fernandez Mancera,
Gustavo A. R. Silva, Sabrina Dubroca, Masahiro Yamada,
Nicolas Schier, linux-kernel, linux-arm-kernel, linux-actions
Cc: oe-kbuild-all, netdev
In-Reply-To: <20260612162257.896792-1-xur@google.com>
Hi,
kernel test robot noticed the following build warnings:
[auto build test WARNING on 2b414a95b8f7307d42173ba9e580d6d3e2bcbfce]
url: https://github.com/intel-lab-lkp/linux/commits/xur-google-com/net-correcting-section-tags-for-init-and-exit-data-functions/20260613-002737
base: 2b414a95b8f7307d42173ba9e580d6d3e2bcbfce
patch link: https://lore.kernel.org/r/20260612162257.896792-1-xur%40google.com
patch subject: [PATCH] net: correcting section tags for .init and .exit data/functions
config: csky-defconfig (https://download.01.org/0day-ci/archive/20260613/202606131254.r0pBxDPY-lkp@intel.com/config)
compiler: csky-linux-gcc (GCC) 16.1.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260613/202606131254.r0pBxDPY-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202606131254.r0pBxDPY-lkp@intel.com/
All warnings (new ones prefixed by >>, old ones prefixed by <<):
WARNING: modpost: vmlinux: section mismatch in reference: tcpv6_init+0x66 (section: .text) -> mptcpv6_init (section: .init.text)
>> WARNING: modpost: vmlinux: section mismatch in reference: tcpv6_exit+0x58 (section: .text) -> mptcpv6_init (section: .init.text)
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply
* [PATCH v2 1/2] dt-bindings: clock: exynos990: Add CLK_GOUT_PERIS_TMU_SUB_PCLK
From: Denzeel Oliva @ 2026-06-13 5:19 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sylwester Nawrocki, Chanwoo Choi,
Peter Griffin, Alim Akhtar, Michael Turquette, Stephen Boyd,
Brian Masney, Rob Herring, Conor Dooley
Cc: linux-samsung-soc, linux-clk, devicetree, linux-arm-kernel,
linux-kernel, Denzeel Oliva
In-Reply-To: <20260613-exynos990-peris-fix-v2-v2-0-3dff7ade75b3@gmail.com>
Add the missing TMU_SUB_PCLK clock ID for the Exynos990 PERIS CMU.
Signed-off-by: Denzeel Oliva <wachiturroxd150@gmail.com>
---
include/dt-bindings/clock/samsung,exynos990.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dt-bindings/clock/samsung,exynos990.h b/include/dt-bindings/clock/samsung,exynos990.h
index 47540307cb52..c06f591d9d90 100644
--- a/include/dt-bindings/clock/samsung,exynos990.h
+++ b/include/dt-bindings/clock/samsung,exynos990.h
@@ -434,5 +434,6 @@
#define CLK_GOUT_PERIS_TMU_TOP_PCLK 17
#define CLK_GOUT_PERIS_OTP_CON_BIRA_OSCCLK 18
#define CLK_GOUT_PERIS_OTP_CON_TOP_OSCCLK 19
+#define CLK_GOUT_PERIS_TMU_SUB_PCLK 20
#endif
--
2.54.0
^ permalink raw reply related
* [PATCH v2 0/2] clk: samsung: exynos990: Fix PERIS gate clock parents and add TMU_SUB
From: Denzeel Oliva @ 2026-06-13 5:19 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sylwester Nawrocki, Chanwoo Choi,
Peter Griffin, Alim Akhtar, Michael Turquette, Stephen Boyd,
Brian Masney, Rob Herring, Conor Dooley
Cc: linux-samsung-soc, linux-clk, devicetree, linux-arm-kernel,
linux-kernel, Denzeel Oliva
Fix PERIS CMU gate clock parent mismatches and add the missing
TMU_SUB_PCLK clock.
Split into dt-bindings (clock ID) and driver (parent fixes) as
required by checkpatch.
Changes in v2:
- Split dt-bindings header change into separate patch (1/2)
- Driver fix now only touches clk-exynos990.c (2/2)
- Add proper cover letter
v1: TODO-add-lore-link
Signed-off-by: Denzeel Oliva <wachiturroxd150@gmail.com>
---
Denzeel Oliva (2):
dt-bindings: clock: exynos990: Add CLK_GOUT_PERIS_TMU_SUB_PCLK
clk: samsung: exynos990: Fix PERIS gate clock parents
drivers/clk/samsung/clk-exynos990.c | 24 ++++++++++++++----------
include/dt-bindings/clock/samsung,exynos990.h | 1 +
2 files changed, 15 insertions(+), 10 deletions(-)
---
base-commit: c425609d6ac4012c8bbf01ec2e10e801b1923a7b
change-id: 20260613-exynos990-peris-fix-v2-619c3a30b36c
Best regards,
--
Denzeel Oliva <wachiturroxd150@gmail.com>
^ permalink raw reply
* [PATCH v2 2/2] clk: samsung: exynos990: Fix PERIS gate clock parents
From: Denzeel Oliva @ 2026-06-13 5:19 UTC (permalink / raw)
To: Krzysztof Kozlowski, Sylwester Nawrocki, Chanwoo Choi,
Peter Griffin, Alim Akhtar, Michael Turquette, Stephen Boyd,
Brian Masney, Rob Herring, Conor Dooley
Cc: linux-samsung-soc, linux-clk, devicetree, linux-arm-kernel,
linux-kernel, Denzeel Oliva
In-Reply-To: <20260613-exynos990-peris-fix-v2-v2-0-3dff7ade75b3@gmail.com>
Correct eight PERIS gate clock parents to match the hardware clock
tree, reorder the GIC mux parents, and add the missing TMU_SUB_PCLK
gate.
Signed-off-by: Denzeel Oliva <wachiturroxd150@gmail.com>
---
drivers/clk/samsung/clk-exynos990.c | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos990.c b/drivers/clk/samsung/clk-exynos990.c
index 4385c3b76dd6..df5928833b23 100644
--- a/drivers/clk/samsung/clk-exynos990.c
+++ b/drivers/clk/samsung/clk-exynos990.c
@@ -21,7 +21,7 @@
#define CLKS_NR_HSI0 (CLK_GOUT_HSI0_LHS_ACEL_D_HSI0_CLK + 1)
#define CLKS_NR_PERIC0 (CLK_GOUT_PERIC0_SYSREG_PCLK + 1)
#define CLKS_NR_PERIC1 (CLK_GOUT_PERIC1_XIU_P_ACLK + 1)
-#define CLKS_NR_PERIS (CLK_GOUT_PERIS_OTP_CON_TOP_OSCCLK + 1)
+#define CLKS_NR_PERIS (CLK_GOUT_PERIS_TMU_SUB_PCLK + 1)
/* ---- CMU_TOP ------------------------------------------------------------- */
@@ -2551,7 +2551,7 @@ static const unsigned long peris_clk_regs[] __initconst = {
/* Parent clock list for CMU_PERIS muxes */
PNAME(mout_peris_bus_user_p) = { "oscclk", "mout_cmu_peris_bus" };
-PNAME(mout_peris_clk_peris_gic_p) = { "oscclk", "mout_peris_bus_user" };
+PNAME(mout_peris_clk_peris_gic_p) = { "mout_peris_bus_user", "oscclk" };
static const struct samsung_mux_clock peris_mux_clks[] __initconst = {
MUX(CLK_MOUT_PERIS_BUS_USER, "mout_peris_bus_user",
@@ -2584,15 +2584,15 @@ static const struct samsung_gate_clock peris_gate_clks[] __initconst = {
CLK_CON_GAT_GOUT_BLK_PERIS_UID_RSTNSYNC_CLK_PERIS_BUSP_IPCLKPORT_CLK,
21, 0, 0),
GATE(CLK_GOUT_PERIS_CLK_PERIS_OSCCLK_CLK,
- "gout_peris_clk_peris_oscclk_clk", "mout_peris_bus_user",
+ "gout_peris_clk_peris_oscclk_clk", "oscclk",
CLK_CON_GAT_CLK_BLK_PERIS_UID_RSTNSYNC_CLK_PERIS_OSCCLK_IPCLKPORT_CLK,
21, 0, 0),
GATE(CLK_GOUT_PERIS_CLK_PERIS_GIC_CLK,
- "gout_peris_clk_peris_gic_clk", "mout_peris_bus_user",
+ "gout_peris_clk_peris_gic_clk", "mout_peris_clk_peris_gic",
CLK_CON_GAT_GOUT_BLK_PERIS_UID_RSTNSYNC_CLK_PERIS_GIC_IPCLKPORT_CLK,
21, 0, 0),
GATE(CLK_GOUT_PERIS_AD_AXI_P_PERIS_ACLKM,
- "gout_peris_ad_axi_p_peris_aclkm", "mout_peris_bus_user",
+ "gout_peris_ad_axi_p_peris_aclkm", "mout_peris_clk_peris_gic",
CLK_CON_GAT_GOUT_BLK_PERIS_UID_AD_AXI_P_PERIS_IPCLKPORT_ACLKM,
21, CLK_IGNORE_UNUSED, 0),
GATE(CLK_GOUT_PERIS_OTP_CON_BIRA_PCLK,
@@ -2600,27 +2600,31 @@ static const struct samsung_gate_clock peris_gate_clks[] __initconst = {
CLK_CON_GAT_GOUT_BLK_PERIS_UID_OTP_CON_BIRA_IPCLKPORT_PCLK,
21, 0, 0),
GATE(CLK_GOUT_PERIS_GIC_CLK,
- "gout_peris_gic_clk", "mout_peris_bus_user",
+ "gout_peris_gic_clk", "mout_peris_clk_peris_gic",
CLK_CON_GAT_GOUT_BLK_PERIS_UID_GIC_IPCLKPORT_CLK,
21, CLK_IS_CRITICAL, 0),
GATE(CLK_GOUT_PERIS_LHM_AXI_P_PERIS_CLK,
- "gout_peris_lhm_axi_p_peris_clk", "oscclk",
+ "gout_peris_lhm_axi_p_peris_clk", "mout_peris_bus_user",
CLK_CON_GAT_GOUT_BLK_PERIS_UID_LHM_AXI_P_PERIS_IPCLKPORT_I_CLK,
21, CLK_IGNORE_UNUSED, 0),
GATE(CLK_GOUT_PERIS_MCT_PCLK,
- "gout_peris_mct_pclk", "mout_peris_clk_peris_gic",
+ "gout_peris_mct_pclk", "mout_peris_bus_user",
CLK_CON_GAT_GOUT_BLK_PERIS_UID_MCT_IPCLKPORT_PCLK,
21, 0, 0),
GATE(CLK_GOUT_PERIS_OTP_CON_TOP_PCLK,
- "gout_peris_otp_con_top_pclk", "mout_peris_clk_peris_gic",
+ "gout_peris_otp_con_top_pclk", "mout_peris_bus_user",
CLK_CON_GAT_GOUT_BLK_PERIS_UID_OTP_CON_TOP_IPCLKPORT_PCLK,
21, 0, 0),
GATE(CLK_GOUT_PERIS_D_TZPC_PERIS_PCLK,
"gout_peris_d_tzpc_peris_pclk", "mout_peris_bus_user",
CLK_CON_GAT_GOUT_BLK_PERIS_UID_D_TZPC_PERIS_IPCLKPORT_PCLK,
21, 0, 0),
+ GATE(CLK_GOUT_PERIS_TMU_SUB_PCLK,
+ "gout_peris_tmu_sub_pclk", "mout_peris_bus_user",
+ CLK_CON_GAT_GOUT_BLK_PERIS_UID_TMU_SUB_IPCLKPORT_PCLK,
+ 21, 0, 0),
GATE(CLK_GOUT_PERIS_TMU_TOP_PCLK,
- "gout_peris_tmu_top_pclk", "mout_peris_clk_peris_gic",
+ "gout_peris_tmu_top_pclk", "mout_peris_bus_user",
CLK_CON_GAT_GOUT_BLK_PERIS_UID_TMU_TOP_IPCLKPORT_PCLK,
21, 0, 0),
GATE(CLK_GOUT_PERIS_OTP_CON_BIRA_OSCCLK,
--
2.54.0
^ permalink raw reply related
* Re: [PATCH v4 20/31] fs/stlmfs: Document ARM SCMI Telemetry filesystem
From: Randy Dunlap @ 2026-06-13 5:27 UTC (permalink / raw)
To: Cristian Marussi, linux-kernel, linux-arm-kernel, arm-scmi,
linux-fsdevel, linux-doc
Cc: sudeep.holla, james.quinlan, f.fainelli, vincent.guittot,
etienne.carriere, peng.fan, michal.simek, d-gole, jic23,
elif.topuz, lukasz.luba, philip.radford, brauner,
souvik.chakravarty, leitao, kas, puranjay, usama.arif,
kernel-team, Jonathan Corbet, Shuah Khan
In-Reply-To: <20260612223802.1337232-21-cristian.marussi@arm.com>
On 6/12/26 3:37 PM, Cristian Marussi wrote:
> +Design
> +======
> +
> +STLMFS is a pseudo filesystem used to expose ARM SCMI Telemetry data
> +discovered dynamically at run-time via SCMI.
> +
> +Inodes are all dynamically created at mount-time from a dedicated
> +kmem_cache based on the gathered available SCMI Telemetry information.
> +
> +Since inodes represent the discovered Telemetry entities, which in turn are
> +statically defined at the platform level and immutable throughout the same
> +session (boot), allocated inodes are freed only at unmount-time and the
> +user is not allowed to delete or create any kind of file within the STLMFS
> +filesystem after mount has completed.
> +
> +A single instance of STLMFS is created at the filesystem level, using
> +get_tree_single(), given that the same SCMI backend entities will be
> +involved no matter how many times you mount it.
> +
> +STLMFS configurations gets appplied by issuing the related SCMI commands to
get applied
or better:
are applied
> +the backend SCMI platform server: for such reason any configuration applied
> +by this FS interface will survive the unmount or the unload of the module, but
> +not a reboot.
--
~Randy
^ permalink raw reply
* Re: [PATCH v4 28/31] [RFC] docs: stlmfs: Document ARM SCMI Telemetry FS ABI
From: Randy Dunlap @ 2026-06-13 5:30 UTC (permalink / raw)
To: Cristian Marussi, linux-kernel, linux-arm-kernel, arm-scmi,
linux-fsdevel, linux-doc
Cc: sudeep.holla, james.quinlan, f.fainelli, vincent.guittot,
etienne.carriere, peng.fan, michal.simek, d-gole, jic23,
elif.topuz, lukasz.luba, philip.radford, brauner,
souvik.chakravarty, leitao, kas, puranjay, usama.arif,
kernel-team
In-Reply-To: <20260612223802.1337232-29-cristian.marussi@arm.com>
On 6/12/26 3:37 PM, Cristian Marussi wrote:
> Add full ABI dcoumentation for stlmfs under testing/
>
> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
> ---
> v3 --> v4
> - renamed to by-components
> - updated date/versions
> - changed output of des/0x<NNN>/value to -> <tstamp> <value>
> (removed colon)
> - added Rationale and Concurrency model
> - added generation counter Description
> v2 --> v3
> - complete ABI entries docs
>
> RFC since unsure if place this into stable/ or testing/
> ---
> Documentation/ABI/testing/stlmfs | 348 +++++++++++++++++++++++++++++++
> 1 file changed, 348 insertions(+)
> create mode 100644 Documentation/ABI/testing/stlmfs
>
> diff --git a/Documentation/ABI/testing/stlmfs b/Documentation/ABI/testing/stlmfs
> new file mode 100644
> index 000000000000..826092a4baf4
> --- /dev/null
> +++ b/Documentation/ABI/testing/stlmfs
> @@ -0,0 +1,348 @@
> +What: /sys/fs/arm_telemetry/tlm_<N>/...
> +Date: Nov 2026
> +KernelVersion: 7.3
> +Contact: cristian.marussi@arm.com
> +Rationale: This filesystem provides access to SCMI telemetry data and
> + configuration.
> + The interface is required to support:
> + - hierarchical dynamically discovered telemetry objects
> + - bulk data read across multiple sources
> + - representation of complex structured data and their
> + relationship
> + - alternative high-frequency data access (ioctl/mmap)
> + These characteristics exceed the intended use of sysfs, which is
> + designed to represent devices properties with simple attribute
> + based configuration with one value per file: representing
> + telemetry Data Events with devices was deemed an abuse by
> + itself.
> + A dedicated filesystem is therefore used to provide a more
> + suitable abstraction for this class of functionality.
> +
> +Concurrency: The telemetry configuration exposed through this filesystem is
> + global to each SCMI telemetry instance, indentified by the top
identified
> + tlm_<N> directory.
> + Concurrent access from multiple user-space processes is allowed.
> + The kernel does not enforce exclusivity or ownership of the
> + interface.
> + All configuration changes are applied immediately by issuing
> + the related SCMI commands. Writes to different attributes may
> + interleave and no atomicity across multiple files is guaranteed.
> + In case of concurrent writes to the same attribute, the last
> + writer wins.
> + Read operations may observe state that has been already modified
> + and it is stale.
> + Userspace is responsible for coordinating access if stronger
> + consistency or serialization is required and this filesystem
> + provides a generation counter to aid in the detection of sudden
> + configuration changes.
> +
> +What: /sys/fs/arm_telemetry/tlm_<N>/all_des_enable
> +Date: Nov 2026
> +KernelVersion: 7.3
> +Contact: cristian.marussi@arm.com
> +Description: A boolean WO entry to enable all the discovered Data Events for
> + SCMI instance <N>.
> +Users: Any userspace telemetry tool
> +
> +What: /sys/fs/arm_telemetry/tlm_<N>/all_tstamp_des_enable
> +Date: Nov 2026
> +KernelVersion: 7.3
> +Contact: cristian.marussi@arm.com
> +Description: A boolean WO entry to enable timestamps for all the discovered
> + Data Events for SCMI instance <N>. (when available)
> +Users: Any userspace telemetry tool
> +
> +What: /sys/fs/arm_telemetry/tlm_<N>/available_update_intervals_ms
> +Date: Nov 2026
> +KernelVersion: 7.3
> +Contact: cristian.marussi@arm.com
> +Description: A RO entry that returns a space separated list of tuples of
> + values, separated by a coma, each one representing a
> + configurable update interval for SCMI instance <N>.
> + Each tuple describes a possible update interval using the
> + format <secs>,<exp> where the final represented interval is
> + calculated as: <secs> * 10 ^ <exp>
> + An example of list of tuples that can be read from this entry:
> + 3,0 4,-1 75,-2 300,-3 1,1 5,3 222,-7
> +Users: Any userspace telemetry tool
> +
> +What: /sys/fs/arm_telemetry/tlm_<N>/by-components/
> +Date: Nov 2026
> +KernelVersion: 7.3
> +Contact: cristian.marussi@arm.com
> +Description: A subdirectory that exposes an alternative topological view of
> + the same set of discovered DEs that can be already found under
> + the des/ branch.
> + This topology subtree is built following this structure:
> + by-components/
> + ├── <COMPO_TYPE_STR>
> + │ ├── <COMPO_ISTANCE_ID>
> + │ │ ├── <DE_UNIT_TYPE_STR>
> + │ │ │ └── <DE_INSTANCE_ID>
> + │ │ │ └── 0x<DE_ID>[<DE_NAME>] -> ../../../../../des/0x<DE_ID>
> +
> + The leaves are actual symlinks to an existing des/0x<DE_ID>
> + subdirectory, while the naming of the subdirectories composing
> + the inner nodes of the subtree are derived from the DataEvent
> + Descriptor in SCMI v4.0 3.12.4.6.
> +Users: Any userspace telemetry tool
> +
> +What: /sys/fs/arm_telemetry/tlm_<N>/control
> +Date: Nov 2026
> +KernelVersion: 7.3
> +Contact: cristian.marussi@arm.com
> +Description: An RW entry that can be used to discover, configure and retrieve
> + Telemetry data using the alternative binary interface based on
> + ioctls which is documented in include/uapi/linux/scmi.h
> +Users: Any userspace telemetry tool
> +
> +What: /sys/fs/arm_telemetry/tlm_<N>/current_update_intervals_ms
> +Date: Nov 2026
> +KernelVersion: 7.3
> +Contact: cristian.marussi@arm.com
> +Description: An RW entry that can be used to get or set the platform update
> + interval for SCMI instance <N>.
> + On read the returned tuple represents the current update
> + interval using the format <secs>,<exp> where the final
> + represented interval is calculated as: <secs> * 10 ^ <exp>
> + On write the accepted format is the same as on read <secs>,<exp>
> + but, optionally, the second element of the tuple can be omitted
> + and in that case the assumed value for the exponent will default
> + to -3, i.e. milliseconds.
> +Users: Any userspace telemetry tool
> +
> +What: /sys/fs/arm_telemetry/tlm_<N>/de_implementation_version
> +Date: Nov 2026
> +KernelVersion: 7.3
> +Contact: cristian.marussi@arm.com
> +Description: A RO entry that returns a string representing the 128bit UUID
> + that uniquely identifies the set of SCMI Telemetry Data Events
> + and their semantic for SCMI instance <N>.
> + This is compliant with the DE_IMPLEMENTATION_REVISION described
> + in SCMI v4.0 Telemetry 3.12.4.3.
> +Users: Any userspace telemetry tool
> +
> +What: /sys/fs/arm_telemetry/tlm_<N>/des_bulk_read
> +Date: Nov 2026
> +KernelVersion: 7.3
> +Contact: cristian.marussi@arm.com
> +Description: A RO entry that returns a multi-line string containing all the
> + the DEs enabled for SCMI instance <N>, one-per-line, formatted
> + as: <DE_ID> <TIMESTAMP> <DATA_VALUE>
> + These DEs readings represent the last value updated by the
> + platform following the configured update interval: on the
> + backend they will have been collected transparently in a number
> + of different ways: on-demand SHMTI lookup, notifications,
> + fastchannels. Data consistency is guaranteed by the underlying
> + SCMI synchronization mechanisms.
> + Any disabled or unavailable DE is simply NOT included.
> +Users: Any userspace telemetry tool
> +
> +What: /sys/fs/arm_telemetry/tlm_<N>/des_single_sample_read
> +Date: Nov 2026
> +KernelVersion: 7.3
> +Contact: cristian.marussi@arm.com
> +Description: A RO entry that returns a multi-line string containing all the
> + the DEs enabled for SCMI instance <N>, one-per-line, formmatted
formatted
> + as: <DE_ID> <TIMESTAMP> <DATA_VALUE>
> + These DEs readings are generated by triggering an explicit and
> + immediate platform update using single sample asynchronous
> + collect methods.
> + Any disabled or unavailable DE is simply NOT included.
--
~Randy
^ permalink raw reply
* Re: [PATCH v4 00/31] Introduce SCMI Telemetry FS support
From: Randy Dunlap @ 2026-06-13 5:35 UTC (permalink / raw)
To: Cristian Marussi, linux-kernel, linux-arm-kernel, arm-scmi,
linux-fsdevel, linux-doc
Cc: sudeep.holla, james.quinlan, f.fainelli, vincent.guittot,
etienne.carriere, peng.fan, michal.simek, d-gole, jic23,
elif.topuz, lukasz.luba, philip.radford, brauner,
souvik.chakravarty, leitao, kas, puranjay, usama.arif,
kernel-team
In-Reply-To: <20260612223802.1337232-1-cristian.marussi@arm.com>
On 6/12/26 3:37 PM, Cristian Marussi wrote:
> Hi all,
>
> --------------------------------------------------------------------------------
> [TLDR Summary]
> This series introduces a new SCMI driver which uses a new Telemetry FS to expose
> and configure SCMI Telemetry Data Events retrieved from the platform SCMI FW
> at runtime. The patches carrying the new STLMFS Filesystem support are tagged
> with 'stlmfs'.
> --------------------------------------------------------------------------------
> ---
> - moved from SysFS/chardev to a full fledged FS
> - added support for SCMI Telemetry BLK timestamps
>
'make htmldocs' with all documentation patches applied says:
WARNING: linext-2026-0610/Documentation/ABI/testing/stlmfs:5: tag 'contact' is invalid
Rationale: This filesystem provides access to SCMI telemetry data and
WARNING: linext-2026-0610/Documentation/ABI/testing/stlmfs:21: tag 'contact' is invalid
Concurrency: The telemetry configuration exposed through this filesystem is
Documentation/ABI/testing/stlmfs:55: ERROR: Unexpected indentation. [docutils]
Documentation/ABI/testing/stlmfs:69: ERROR: Unexpected indentation. [docutils]
Documentation/ABI/testing/stlmfs:282: ERROR: Unexpected indentation. [docutils]
WARNING: linext-2026-0610/Documentation/ABI/testing/stlmfs:39: abi_sys_fs_arm_telemetry_tlm_n doesn't have a description
linext-2026-0610/Documentation/filesystems/stlmfs.rst:255: WARNING: Title underline too short.
by-components/
----------- [docutils]
linext-2026-0610/Documentation/filesystems/stlmfs.rst: WARNING: document isn't included in any toctree [toc.not_included]
Please correct these and run 'make htmldocs' to verify that they are fixed.
>
> Thanks,
> Cristian
>
> [0]: https://developer.arm.com/documentation/den0056/f/?lang=en
> [1]: https://lore.kernel.org/arm-scmi/20250620192813.2463367-1-cristian.marussi@arm.com/
> [2]: https://git.kernel.org/pub/scm/linux/kernel/git/cris/linux.git/log/?h=scmi_telemetry_unified_fs_V4
>
> Cristian Marussi (31):
> firmware: arm_scmi: Add new SCMIv4.0 error codes definitions
> firmware: arm_scmi: Reduce the scope of protocols mutex
> firmware: arm_scmi: Allow registration of unknown-size events/reports
> firmware: arm_scmi: Allow protocols to register for notifications
> uapi: Add ARM SCMI definitions
> dt-bindings: firmware: arm,scmi: Add support for telemetry protocol
> include: trace: Add Telemetry trace events
> firmware: arm_scmi: Add basic Telemetry support
> firmware: arm_scmi: Add support to parse SHMTIs areas
> firmware: arm_scmi: Add Telemetry configuration operations
> firmware: arm_scmi: Add Telemetry DataEvent read capabilities
> firmware: arm_scmi: Add support for Telemetry reset
> firmware: arm_scmi: Add Telemetry notification support
> firmware: arm_scmi: Add support for boot-on Telemetry
> firmware: arm_scmi: Add Telemetry generation counter
> firmware: arm_scmi: Add common per-protocol debugfs support
> firmware: arm_scmi: Add Telemetry debugfs SHMTI dump support
> firmware: arm_scmi: Add Telemetry debugfs ABI documentation
> firmware: arm_scmi: stlmfs: Add System Telemetry filesystem driver
> fs/stlmfs: Document ARM SCMI Telemetry filesystem
> firmware: arm_scmi: stlmfs: Add basic mount options
> fs/stlmfs: Document ARM SCMI Telemetry FS mount options
> firmware: arm_scmi: stlmfs: Add ioctls support
> fs/stlmfs: Document alternative ioctl based binary interface
> firmware: arm_scmi: stlmfs: Add by-components view
> fs/stlmfs: Document alternative topological view
> firmware: arm_scmi: stlmfs: Add generation file
> [RFC] docs: stlmfs: Document ARM SCMI Telemetry FS ABI
> firmware: arm_scmi: stlmfs: Add lazy population support
> fs/stlmfs: Document lazy mode and related mount option
> [RFC] tools/scmi: Add SCMI Telemetry testing tool
>
> Documentation/ABI/testing/debugfs-scmi | 22 +
> Documentation/ABI/testing/stlmfs | 348 ++
> .../bindings/firmware/arm,scmi.yaml | 8 +
> Documentation/filesystems/stlmfs.rst | 342 ++
> MAINTAINERS | 1 +
> drivers/firmware/arm_scmi/Kconfig | 24 +
> drivers/firmware/arm_scmi/Makefile | 3 +-
> drivers/firmware/arm_scmi/common.h | 10 +
> drivers/firmware/arm_scmi/driver.c | 93 +-
> drivers/firmware/arm_scmi/notify.c | 30 +-
> drivers/firmware/arm_scmi/notify.h | 8 +-
> drivers/firmware/arm_scmi/protocols.h | 13 +
> .../firmware/arm_scmi/scmi_system_telemetry.c | 3146 ++++++++++++++++
> drivers/firmware/arm_scmi/telemetry.c | 3300 +++++++++++++++++
> include/linux/scmi_protocol.h | 203 +-
> include/trace/events/scmi.h | 48 +-
> include/uapi/linux/scmi.h | 289 ++
> tools/testing/scmi/Makefile | 25 +
> tools/testing/scmi/stlm.c | 434 +++
> 19 files changed, 8307 insertions(+), 40 deletions(-)
> create mode 100644 Documentation/ABI/testing/stlmfs
> create mode 100644 Documentation/filesystems/stlmfs.rst
> create mode 100644 drivers/firmware/arm_scmi/scmi_system_telemetry.c
> create mode 100644 drivers/firmware/arm_scmi/telemetry.c
> create mode 100644 include/uapi/linux/scmi.h
> create mode 100644 tools/testing/scmi/Makefile
> create mode 100644 tools/testing/scmi/stlm.c
>
--
~Randy
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox