* Re: [PATCH v13 3/3] media: nxp: Add i.MX95 CSI pixel formatter v4l2 driver
From: Loic Poulain @ 2026-07-20 10:15 UTC (permalink / raw)
To: guoniu.zhou
Cc: Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, Laurent Pinchart, Frank Li, Bryan O'Donoghue,
Abel Vesa, Peng Fan, Michael Turquette, Stephen Boyd, imx,
linux-media, devicetree, linux-arm-kernel, linux-kernel,
linux-clk, Guoniu Zhou
In-Reply-To: <20260720-csi_formatter-v13-3-4dc9a80e4cfd@oss.nxp.com>
On Mon, Jul 20, 2026 at 11:56 AM <guoniu.zhou@oss.nxp.com> wrote:
>
> From: Guoniu Zhou <guoniu.zhou@nxp.com>
>
> The CSI pixel formatter is a module found on i.MX95 used to reformat
> packet info, pixel and non-pixel data from CSI-2 host controller to
> match Pixel Link(PL) definition.
>
> Add data formatting support.
>
> Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
Looks good to me but if you're planning another version, I'd recommend
using devm_pm_clk_create(dev) together with of_pm_clk_add_clks(dev)
and relying on the generic PM clock infrastructure instead of handling
the clocks explicitly in the driver.
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
> ---
> Changes in v13:
> - Replace pr_warn_once() with dev_warn() in csi_formatter_get_index_by_dt()
> to provide device context and warn on every occurrence (Loic)
> - Add WARN_ON() check for csi_formatter_find_format() return value in
> start/stop_stream functions to catch unexpected NULL (Loic)
> - Use regmap_set_bits()/regmap_clear_bits() instead of read-modify-write
> pattern and remove unused csi_formatter_read/write helper functions (Loic)
> - Add Reviewed-by tag from Frank Li
>
> Changes in v12:
> - Fix stream ID handling: iterate routing table instead of assuming
> stream ID equals loop index (0-7)
> - Remove stream_to_vc[] array: derive VC from routing table and frame
> descriptor on each start/stop operation
> - Remove V4L2_SUBDEV_FL_HAS_EVENTS flag since driver does not generate events
> - Support stream IDs 0-63 by using BIT_ULL() for stream masks
> - Add get_frame_desc call in stop_stream with proper error handling
> - Add csi_formatter_read() helper function for register reads
> - Use read-modify-write for CSI_VC_PIXEL_DATA_TYPE register to support
> multiplexed streams sharing the same virtual channel
> - Use route->sink_pad instead of hardcoded CSI_FORMATTER_PAD_SINK
> - Write back coerced format in set_fmt before propagating to source stream
> - Drop Frank's Reviewed-by tag due to significant changes, requesting re-review
>
> Changes in v10:
> - Use u8 for vc in csi_formatter_get_vc() and drop vc < 0 check
> - Add MFD_SYSCON dependency to Kconfig
> - Fix stream/VC mapping potential mismatch in start/stop_stream functions
>
> Changes in v8:
> - Remove fmt field and look up format from subdev state instead
> - Unify function and structure naming to use csi_formatter_ prefix
> - Remove misleading alignment comment from set_fmt function
> - Optimize get_frame_desc to call once per start_stream
> - Replace V4L2_FRAME_DESC_ENTRY_MAX with CSI_FORMATTER_VC_NUM in loops
> - Remove redundant debug message in enable_streams
> - Use MEDIA_PAD_FL_MUST_CONNECT flag instead of manual link check
> - Fix typo: Formater -> Formatter in Kconfig help text
> - Improve grammar in data type index mapping comment
>
> Changes in v7:
> - Update references from imx9 to imx95 for consistency with dt-bindings
> - Enable PM runtime before async registration
>
> Changes in v6:
> - Remove unused header includes
> - Unify macro naming: VCx/VCX -> VC and parameter x -> vc
> - Remove unused format field from csi_formatter struct
> - Use compact initialization for formats array
> - Make find_csi_format() return NULL instead of default format
> - Use unsigned int for array index in find_csi_format()
> - Add err_ prefix to error handling labels
> - Add v4l2_subdev_cleanup() and reorder cleanup sequence
> - Update enable_streams debug output format
> - Rename VC_MAX to VC_NUM and fix boundary check
> - Update CSI formatter Kconfig description
> - Use v4l2_subdev_get_frame_desc_passthrough() helper
> - Fix error paths in async registration and probe
> - Add mutex to protect enabled_streams
> - Switch to devm_pm_runtime_enable()
> - Remove redundant num_routes check in set_routing
> - Optimize get_index_by_dt() and add warning for unsupported type
> - csi_formatter_start/stop_stream: Process all streams in mask
> ---
> MAINTAINERS | 8 +
> drivers/media/platform/nxp/Kconfig | 15 +
> drivers/media/platform/nxp/Makefile | 1 +
> drivers/media/platform/nxp/imx95-csi-formatter.c | 808 +++++++++++++++++++++++
> 4 files changed, 832 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index efbf808063e5..05009228b162 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19275,6 +19275,14 @@ S: Maintained
> F: Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
> F: drivers/media/platform/nxp/imx-jpeg
>
> +NXP i.MX 95 CSI PIXEL FORMATTER V4L2 DRIVER
> +M: Guoniu Zhou <guoniu.zhou@nxp.com>
> +L: imx@lists.linux.dev
> +L: linux-media@vger.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/media/fsl,imx95-csi-formatter.yaml
> +F: drivers/media/platform/nxp/imx95-csi-formatter.c
> +
> NXP i.MX CLOCK DRIVERS
> M: Abel Vesa <abelvesa@kernel.org>
> R: Peng Fan <peng.fan@nxp.com>
> diff --git a/drivers/media/platform/nxp/Kconfig b/drivers/media/platform/nxp/Kconfig
> index 40e3436669e2..8f49908b0022 100644
> --- a/drivers/media/platform/nxp/Kconfig
> +++ b/drivers/media/platform/nxp/Kconfig
> @@ -28,6 +28,21 @@ config VIDEO_IMX8MQ_MIPI_CSI2
> Video4Linux2 driver for the MIPI CSI-2 receiver found on the i.MX8MQ
> SoC.
>
> +config VIDEO_IMX95_CSI_FORMATTER
> + tristate "NXP i.MX95 CSI Pixel Formatter driver"
> + depends on ARCH_MXC || COMPILE_TEST
> + depends on MFD_SYSCON
> + depends on VIDEO_DEV
> + select MEDIA_CONTROLLER
> + select V4L2_FWNODE
> + select VIDEO_V4L2_SUBDEV_API
> + help
> + This driver provides support for the CSI Pixel Formatter found on
> + i.MX95 series SoCs. This module unpacks the pixels received from the
> + CSI-2 interface and reformats them to meet pixel link requirements.
> +
> + Say Y here to enable CSI Pixel Formatter module for i.MX95 SoC.
> +
> config VIDEO_IMX_MIPI_CSIS
> tristate "NXP MIPI CSI-2 CSIS receiver found on i.MX7 and i.MX8 models"
> depends on ARCH_MXC || COMPILE_TEST
> diff --git a/drivers/media/platform/nxp/Makefile b/drivers/media/platform/nxp/Makefile
> index 4d90eb713652..6410115d870e 100644
> --- a/drivers/media/platform/nxp/Makefile
> +++ b/drivers/media/platform/nxp/Makefile
> @@ -6,6 +6,7 @@ obj-y += imx8-isi/
>
> obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-media-csi.o
> obj-$(CONFIG_VIDEO_IMX8MQ_MIPI_CSI2) += imx8mq-mipi-csi2.o
> +obj-$(CONFIG_VIDEO_IMX95_CSI_FORMATTER) += imx95-csi-formatter.o
> obj-$(CONFIG_VIDEO_IMX_MIPI_CSIS) += imx-mipi-csis.o
> obj-$(CONFIG_VIDEO_IMX_PXP) += imx-pxp.o
> obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o
> diff --git a/drivers/media/platform/nxp/imx95-csi-formatter.c b/drivers/media/platform/nxp/imx95-csi-formatter.c
> new file mode 100644
> index 000000000000..b0e8e753e94a
> --- /dev/null
> +++ b/drivers/media/platform/nxp/imx95-csi-formatter.c
> @@ -0,0 +1,808 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2025 NXP
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +
> +#include <media/mipi-csi2.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mc.h>
> +#include <media/v4l2-subdev.h>
> +
> +/* CSI Pixel Formatter registers map */
> +
> +#define CSI_VC_INTERLACED_LINE_CNT(vc) (0x00 + (vc) * 0x04)
> +#define INTERLACED_ODD_LINE_CNT_SET(x) FIELD_PREP(GENMASK(13, 0), (x))
> +#define INTERLACED_EVEN_LINE_CNT_SET(x) FIELD_PREP(GENMASK(29, 16), (x))
> +
> +#define CSI_VC_INTERLACED_CTRL 0x20
> +
> +#define CSI_VC_INTERLACED_ERR 0x24
> +#define CSI_VC_ERR_MASK GENMASK(7, 0)
> +#define CSI_VC_ERR(vc) BIT((vc))
> +
> +#define CSI_VC_YUV420_FIRST_LINE_EVEN 0x28
> +#define YUV420_FIRST_LINE_EVEN(vc) BIT((vc))
> +
> +#define CSI_RAW32_CTRL 0x30
> +#define CSI_VC_RAW32_MODE(vc) BIT((vc))
> +#define CSI_VC_RAW32_SWAP_MODE(vc) BIT((vc) + 8)
> +
> +#define CSI_STREAM_FENCING_CTRL 0x34
> +#define CSI_VC_STREAM_FENCING(vc) BIT((vc))
> +#define CSI_VC_STREAM_FENCING_RST(vc) BIT((vc) + 8)
> +
> +#define CSI_STREAM_FENCING_STS 0x38
> +#define CSI_STREAM_FENCING_STS_MASK GENMASK(7, 0)
> +
> +#define CSI_VC_NON_PIXEL_DATA_TYPE(vc) (0x40 + (vc) * 0x04)
> +
> +#define CSI_VC_PIXEL_DATA_CTRL(vc) (0x60 + (vc) * 0x04)
> +#define NEW_VC(vc) FIELD_PREP(GENMASK(3, 1), vc)
> +#define REROUTE_VC_ENABLE BIT(0)
> +
> +#define CSI_VC_ROUTE_PIXEL_DATA_TYPE(vc) (0x80 + (vc) * 0x04)
> +
> +#define CSI_VC_NON_PIXEL_DATA_CTRL(vc) (0xa0 + (vc) * 0x04)
> +
> +#define CSI_VC_PIXEL_DATA_TYPE(vc) (0xc0 + (vc) * 0x04)
> +
> +#define CSI_VC_PIXEL_DATA_TYPE_ERR(vc) (0xe0 + (vc) * 0x04)
> +
> +#define CSI_FORMATTER_PAD_SINK 0
> +#define CSI_FORMATTER_PAD_SOURCE 1
> +#define CSI_FORMATTER_PAD_NUM 2
> +
> +#define CSI_FORMATTER_VC_NUM 8 /* Number of virtual channels */
> +
> +struct csi_formatter_pix_format {
> + u32 code;
> + u32 data_type;
> +};
> +
> +struct csi_formatter {
> + struct device *dev;
> + struct regmap *regs;
> + struct clk *clk;
> +
> + struct v4l2_subdev sd;
> + struct v4l2_subdev *csi_sd;
> + struct v4l2_async_notifier notifier;
> + struct media_pad pads[CSI_FORMATTER_PAD_NUM];
> +
> + u32 remote_pad;
> + u32 reg_offset;
> +
> + /* Protects enabled_streams */
> + struct mutex lock;
> + u64 enabled_streams;
> +};
> +
> +struct csi_formatter_dt_index {
> + u8 dtype;
> + u8 index;
> +};
> +
> +/*
> + * The index corresponds to the bit index in the register that enables
> + * the data type of pixel data transported by the Formatter.
> + */
> +static const struct csi_formatter_dt_index formatter_dt_to_index_map[] = {
> + { .dtype = MIPI_CSI2_DT_YUV420_8B, .index = 0 },
> + { .dtype = MIPI_CSI2_DT_YUV420_8B_LEGACY, .index = 2 },
> + { .dtype = MIPI_CSI2_DT_YUV422_8B, .index = 6 },
> + { .dtype = MIPI_CSI2_DT_RGB444, .index = 8 },
> + { .dtype = MIPI_CSI2_DT_RGB555, .index = 9 },
> + { .dtype = MIPI_CSI2_DT_RGB565, .index = 10 },
> + { .dtype = MIPI_CSI2_DT_RGB666, .index = 11 },
> + { .dtype = MIPI_CSI2_DT_RGB888, .index = 12 },
> + { .dtype = MIPI_CSI2_DT_RAW6, .index = 16 },
> + { .dtype = MIPI_CSI2_DT_RAW7, .index = 17 },
> + { .dtype = MIPI_CSI2_DT_RAW8, .index = 18 },
> + { .dtype = MIPI_CSI2_DT_RAW10, .index = 19 },
> + { .dtype = MIPI_CSI2_DT_RAW12, .index = 20 },
> + { .dtype = MIPI_CSI2_DT_RAW14, .index = 21 },
> + { .dtype = MIPI_CSI2_DT_RAW16, .index = 22 },
> +};
> +
> +static const struct csi_formatter_pix_format formats[] = {
> + /* YUV formats */
> + { MEDIA_BUS_FMT_UYVY8_1X16, MIPI_CSI2_DT_YUV422_8B },
> + /* RGB formats */
> + { MEDIA_BUS_FMT_RGB565_1X16, MIPI_CSI2_DT_RGB565 },
> + { MEDIA_BUS_FMT_RGB888_1X24, MIPI_CSI2_DT_RGB888 },
> + /* RAW (Bayer and greyscale) formats */
> + { MEDIA_BUS_FMT_SBGGR8_1X8, MIPI_CSI2_DT_RAW8 },
> + { MEDIA_BUS_FMT_SGBRG8_1X8, MIPI_CSI2_DT_RAW8 },
> + { MEDIA_BUS_FMT_SGRBG8_1X8, MIPI_CSI2_DT_RAW8 },
> + { MEDIA_BUS_FMT_SRGGB8_1X8, MIPI_CSI2_DT_RAW8 },
> + { MEDIA_BUS_FMT_Y8_1X8, MIPI_CSI2_DT_RAW8 },
> + { MEDIA_BUS_FMT_SBGGR10_1X10, MIPI_CSI2_DT_RAW10 },
> + { MEDIA_BUS_FMT_SGBRG10_1X10, MIPI_CSI2_DT_RAW10 },
> + { MEDIA_BUS_FMT_SGRBG10_1X10, MIPI_CSI2_DT_RAW10 },
> + { MEDIA_BUS_FMT_SRGGB10_1X10, MIPI_CSI2_DT_RAW10 },
> + { MEDIA_BUS_FMT_Y10_1X10, MIPI_CSI2_DT_RAW10 },
> + { MEDIA_BUS_FMT_SBGGR12_1X12, MIPI_CSI2_DT_RAW12 },
> + { MEDIA_BUS_FMT_SGBRG12_1X12, MIPI_CSI2_DT_RAW12 },
> + { MEDIA_BUS_FMT_SGRBG12_1X12, MIPI_CSI2_DT_RAW12 },
> + { MEDIA_BUS_FMT_SRGGB12_1X12, MIPI_CSI2_DT_RAW12 },
> + { MEDIA_BUS_FMT_Y12_1X12, MIPI_CSI2_DT_RAW12 },
> + { MEDIA_BUS_FMT_SBGGR14_1X14, MIPI_CSI2_DT_RAW14 },
> + { MEDIA_BUS_FMT_SGBRG14_1X14, MIPI_CSI2_DT_RAW14 },
> + { MEDIA_BUS_FMT_SGRBG14_1X14, MIPI_CSI2_DT_RAW14 },
> + { MEDIA_BUS_FMT_SRGGB14_1X14, MIPI_CSI2_DT_RAW14 },
> + { MEDIA_BUS_FMT_SBGGR16_1X16, MIPI_CSI2_DT_RAW16 },
> + { MEDIA_BUS_FMT_SGBRG16_1X16, MIPI_CSI2_DT_RAW16 },
> + { MEDIA_BUS_FMT_SGRBG16_1X16, MIPI_CSI2_DT_RAW16 },
> + { MEDIA_BUS_FMT_SRGGB16_1X16, MIPI_CSI2_DT_RAW16 },
> +};
> +
> +static const struct v4l2_mbus_framefmt formatter_default_fmt = {
> + .code = MEDIA_BUS_FMT_UYVY8_1X16,
> + .width = 1920U,
> + .height = 1080U,
> + .field = V4L2_FIELD_NONE,
> + .colorspace = V4L2_COLORSPACE_SMPTE170M,
> + .xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(V4L2_COLORSPACE_SMPTE170M),
> + .ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(V4L2_COLORSPACE_SMPTE170M),
> + .quantization = V4L2_QUANTIZATION_LIM_RANGE,
> +};
> +
> +static const struct csi_formatter_pix_format *csi_formatter_find_format(u32 code)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(formats); i++)
> + if (code == formats[i].code)
> + return &formats[i];
> +
> + return NULL;
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * V4L2 subdev operations
> + */
> +
> +static inline struct csi_formatter *sd_to_formatter(struct v4l2_subdev *sdev)
> +{
> + return container_of(sdev, struct csi_formatter, sd);
> +}
> +
> +static int __csi_formatter_subdev_set_routing(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_krouting *routing)
> +{
> + int ret;
> +
> + ret = v4l2_subdev_routing_validate(sd, routing,
> + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
> + if (ret)
> + return ret;
> +
> + return v4l2_subdev_set_routing_with_fmt(sd, state, routing,
> + &formatter_default_fmt);
> +}
> +
> +static int csi_formatter_subdev_init_state(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *sd_state)
> +{
> + struct v4l2_subdev_route routes[] = {
> + {
> + .sink_pad = CSI_FORMATTER_PAD_SINK,
> + .sink_stream = 0,
> + .source_pad = CSI_FORMATTER_PAD_SOURCE,
> + .source_stream = 0,
> + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
> + },
> + };
> +
> + struct v4l2_subdev_krouting routing = {
> + .num_routes = ARRAY_SIZE(routes),
> + .routes = routes,
> + };
> +
> + return __csi_formatter_subdev_set_routing(sd, sd_state, &routing);
> +}
> +
> +static int csi_formatter_subdev_enum_mbus_code(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *sd_state,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + if (code->pad == CSI_FORMATTER_PAD_SOURCE) {
> + struct v4l2_mbus_framefmt *fmt;
> +
> + if (code->index > 0)
> + return -EINVAL;
> +
> + fmt = v4l2_subdev_state_get_format(sd_state, code->pad,
> + code->stream);
> + code->code = fmt->code;
> + return 0;
> + }
> +
> + if (code->index >= ARRAY_SIZE(formats))
> + return -EINVAL;
> +
> + code->code = formats[code->index].code;
> +
> + return 0;
> +}
> +
> +static int csi_formatter_subdev_set_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *sd_state,
> + struct v4l2_subdev_format *sdformat)
> +{
> + struct csi_formatter_pix_format const *format;
> + struct v4l2_mbus_framefmt *fmt;
> +
> + if (sdformat->pad == CSI_FORMATTER_PAD_SOURCE)
> + return v4l2_subdev_get_fmt(sd, sd_state, sdformat);
> +
> + format = csi_formatter_find_format(sdformat->format.code);
> + if (!format)
> + format = &formats[0];
> +
> + v4l_bound_align_image(&sdformat->format.width, 1, 0xffff, 2,
> + &sdformat->format.height, 1, 0xffff, 0, 0);
> +
> + fmt = v4l2_subdev_state_get_format(sd_state, sdformat->pad,
> + sdformat->stream);
> + *fmt = sdformat->format;
> +
> + /* Set default code if user set an invalid value */
> + fmt->code = format->code;
> + sdformat->format = *fmt;
> +
> + /* Propagate the format from sink stream to source stream */
> + fmt = v4l2_subdev_state_get_opposite_stream_format(sd_state, sdformat->pad,
> + sdformat->stream);
> + if (!fmt)
> + return -EINVAL;
> +
> + *fmt = sdformat->format;
> +
> + return 0;
> +}
> +
> +static int csi_formatter_subdev_set_routing(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + enum v4l2_subdev_format_whence which,
> + struct v4l2_subdev_krouting *routing)
> +{
> + if (which == V4L2_SUBDEV_FORMAT_ACTIVE &&
> + media_entity_is_streaming(&sd->entity))
> + return -EBUSY;
> +
> + return __csi_formatter_subdev_set_routing(sd, state, routing);
> +}
> +
> +static u8 csi_formatter_get_index_by_dt(struct csi_formatter *formatter,
> + u8 data_type)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(formatter_dt_to_index_map); ++i) {
> + const struct csi_formatter_dt_index *entry =
> + &formatter_dt_to_index_map[i];
> +
> + if (data_type == entry->dtype)
> + return entry->index;
> + }
> +
> + dev_warn(formatter->dev, "Unsupported data type 0x%x, using default\n",
> + data_type);
> +
> + return formatter_dt_to_index_map[0].index;
> +}
> +
> +static int csi_formatter_get_vc(struct csi_formatter *formatter,
> + struct v4l2_mbus_frame_desc *fd,
> + unsigned int stream)
> +{
> + struct v4l2_mbus_frame_desc_entry *entry = NULL;
> + unsigned int i;
> + u8 vc;
> +
> + for (i = 0; i < fd->num_entries; ++i) {
> + if (fd->entry[i].stream == stream) {
> + entry = &fd->entry[i];
> + break;
> + }
> + }
> +
> + if (!entry) {
> + dev_err(formatter->dev,
> + "No frame desc entry for stream %u\n", stream);
> + return -EPIPE;
> + }
> +
> + vc = entry->bus.csi2.vc;
> +
> + if (vc >= CSI_FORMATTER_VC_NUM) {
> + dev_err(formatter->dev, "Invalid virtual channel %u\n", vc);
> + return -EINVAL;
> + }
> +
> + return vc;
> +}
> +
> +static void csi_formatter_stop_stream(struct csi_formatter *formatter,
> + struct v4l2_subdev_state *state,
> + u64 stream_mask)
> +{
> + const struct csi_formatter_pix_format *pix_fmt;
> + struct v4l2_mbus_frame_desc fd = {};
> + struct v4l2_subdev_route *route;
> + struct v4l2_mbus_framefmt *fmt;
> + unsigned int reg;
> + unsigned int mask;
> + int vc;
> + int ret;
> +
> + ret = v4l2_subdev_call(formatter->csi_sd, pad, get_frame_desc,
> + formatter->remote_pad, &fd);
> + if (ret < 0 && ret != -ENOIOCTLCMD) {
> + dev_err(formatter->dev, "Failed to get frame desc: %d\n", ret);
> + return;
> + }
> +
> + for_each_active_route(&state->routing, route) {
> + if (route->source_pad != CSI_FORMATTER_PAD_SOURCE)
> + continue;
> +
> + if (!(stream_mask & BIT_ULL(route->source_stream)))
> + continue;
> +
> + if (ret == -ENOIOCTLCMD) {
> + /*
> + * Source doesn't implement get_frame_desc, use
> + * default VC 0
> + */
> + vc = 0;
> + } else {
> + vc = csi_formatter_get_vc(formatter, &fd,
> + route->sink_stream);
> + if (vc < 0)
> + continue;
> + }
> +
> + fmt = v4l2_subdev_state_get_format(state, route->sink_pad,
> + route->sink_stream);
> +
> + pix_fmt = csi_formatter_find_format(fmt->code);
> + if (WARN_ON(!pix_fmt))
> + continue;
> +
> + reg = CSI_VC_PIXEL_DATA_TYPE(vc) + formatter->reg_offset;
> + mask = BIT(csi_formatter_get_index_by_dt(formatter,
> + pix_fmt->data_type));
> +
> + /* Clear the data type bit to disable this VC */
> + regmap_clear_bits(formatter->regs, reg, mask);
> + }
> +}
> +
> +static int csi_formatter_start_stream(struct csi_formatter *formatter,
> + struct v4l2_subdev_state *state,
> + u64 stream_mask)
> +{
> + const struct csi_formatter_pix_format *pix_fmt;
> + struct v4l2_subdev_route *route;
> + struct v4l2_mbus_framefmt *fmt;
> + struct v4l2_mbus_frame_desc fd = {};
> + u64 configured_streams = 0;
> + unsigned int reg;
> + unsigned int mask;
> + int vc;
> + int ret;
> +
> + ret = v4l2_subdev_call(formatter->csi_sd, pad, get_frame_desc,
> + formatter->remote_pad, &fd);
> + if (ret < 0 && ret != -ENOIOCTLCMD) {
> + dev_err(formatter->dev, "Failed to get frame desc: %d\n", ret);
> + return ret;
> + }
> +
> + for_each_active_route(&state->routing, route) {
> + if (route->source_pad != CSI_FORMATTER_PAD_SOURCE)
> + continue;
> +
> + if (!(stream_mask & BIT_ULL(route->source_stream)))
> + continue;
> +
> + if (ret == -ENOIOCTLCMD) {
> + /*
> + * Source doesn't implement get_frame_desc, use
> + * default VC 0
> + */
> + vc = 0;
> + } else {
> + vc = csi_formatter_get_vc(formatter, &fd,
> + route->sink_stream);
> + if (vc < 0) {
> + ret = vc;
> + goto err_cleanup;
> + }
> + }
> +
> + fmt = v4l2_subdev_state_get_format(state, route->sink_pad,
> + route->sink_stream);
> +
> + pix_fmt = csi_formatter_find_format(fmt->code);
> + if (WARN_ON(!pix_fmt)) {
> + ret = -EINVAL;
> + goto err_cleanup;
> + }
> +
> + reg = CSI_VC_PIXEL_DATA_TYPE(vc) + formatter->reg_offset;
> + mask = BIT(csi_formatter_get_index_by_dt(formatter,
> + pix_fmt->data_type));
> +
> + /* Set the data type bit to enable this VC */
> + regmap_set_bits(formatter->regs, reg, mask);
> +
> + configured_streams |= BIT_ULL(route->source_stream);
> + }
> +
> + return 0;
> +
> +err_cleanup:
> + csi_formatter_stop_stream(formatter, state, configured_streams);
> + return ret;
> +}
> +
> +static int csi_formatter_subdev_enable_streams(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + u32 pad, u64 streams_mask)
> +{
> + struct csi_formatter *formatter = sd_to_formatter(sd);
> + struct device *dev = formatter->dev;
> + u64 sink_streams;
> + int ret;
> +
> + sink_streams = v4l2_subdev_state_xlate_streams(state,
> + CSI_FORMATTER_PAD_SOURCE,
> + CSI_FORMATTER_PAD_SINK,
> + &streams_mask);
> + if (!sink_streams || !streams_mask)
> + return -EINVAL;
> +
> + guard(mutex)(&formatter->lock);
> +
> + if (!formatter->enabled_streams) {
> + ret = pm_runtime_resume_and_get(formatter->dev);
> + if (ret < 0) {
> + dev_err(dev, "Failed to resume runtime PM: %d\n", ret);
> + return ret;
> + }
> + }
> +
> + ret = csi_formatter_start_stream(formatter, state, streams_mask);
> + if (ret)
> + goto err_runtime_put;
> +
> + ret = v4l2_subdev_enable_streams(formatter->csi_sd,
> + formatter->remote_pad,
> + sink_streams);
> + if (ret)
> + goto err_stop_stream;
> +
> + formatter->enabled_streams |= streams_mask;
> +
> + return 0;
> +
> +err_stop_stream:
> + csi_formatter_stop_stream(formatter, state, streams_mask);
> +err_runtime_put:
> + if (!formatter->enabled_streams)
> + pm_runtime_put(formatter->dev);
> + return ret;
> +}
> +
> +static int csi_formatter_subdev_disable_streams(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + u32 pad, u64 streams_mask)
> +{
> + struct csi_formatter *formatter = sd_to_formatter(sd);
> + u64 sink_streams;
> + int ret;
> +
> + sink_streams = v4l2_subdev_state_xlate_streams(state,
> + CSI_FORMATTER_PAD_SOURCE,
> + CSI_FORMATTER_PAD_SINK,
> + &streams_mask);
> + if (!sink_streams || !streams_mask)
> + return -EINVAL;
> +
> + guard(mutex)(&formatter->lock);
> +
> + ret = v4l2_subdev_disable_streams(formatter->csi_sd, formatter->remote_pad,
> + sink_streams);
> + if (ret)
> + dev_err(formatter->dev, "Failed to disable streams: %d\n", ret);
> +
> + csi_formatter_stop_stream(formatter, state, streams_mask);
> +
> + formatter->enabled_streams &= ~streams_mask;
> +
> + if (!formatter->enabled_streams)
> + pm_runtime_put(formatter->dev);
> +
> + return ret;
> +}
> +
> +static const struct v4l2_subdev_pad_ops formatter_subdev_pad_ops = {
> + .enum_mbus_code = csi_formatter_subdev_enum_mbus_code,
> + .get_fmt = v4l2_subdev_get_fmt,
> + .set_fmt = csi_formatter_subdev_set_fmt,
> + .get_frame_desc = v4l2_subdev_get_frame_desc_passthrough,
> + .set_routing = csi_formatter_subdev_set_routing,
> + .enable_streams = csi_formatter_subdev_enable_streams,
> + .disable_streams = csi_formatter_subdev_disable_streams,
> +};
> +
> +static const struct v4l2_subdev_ops formatter_subdev_ops = {
> + .pad = &formatter_subdev_pad_ops,
> +};
> +
> +static const struct v4l2_subdev_internal_ops formatter_internal_ops = {
> + .init_state = csi_formatter_subdev_init_state,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Media entity operations
> + */
> +
> +static const struct media_entity_operations formatter_entity_ops = {
> + .link_validate = v4l2_subdev_link_validate,
> + .get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1,
> +};
> +
> +static int csi_formatter_subdev_init(struct csi_formatter *formatter)
> +{
> + struct v4l2_subdev *sd = &formatter->sd;
> + int ret;
> +
> + v4l2_subdev_init(sd, &formatter_subdev_ops);
> +
> + snprintf(sd->name, sizeof(sd->name), "%s", dev_name(formatter->dev));
> + sd->internal_ops = &formatter_internal_ops;
> +
> + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> + V4L2_SUBDEV_FL_STREAMS;
> + sd->entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
> + sd->entity.ops = &formatter_entity_ops;
> + sd->dev = formatter->dev;
> +
> + formatter->pads[CSI_FORMATTER_PAD_SINK].flags = MEDIA_PAD_FL_SINK
> + | MEDIA_PAD_FL_MUST_CONNECT;
> + formatter->pads[CSI_FORMATTER_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> +
> + ret = media_entity_pads_init(&sd->entity, CSI_FORMATTER_PAD_NUM,
> + formatter->pads);
> + if (ret) {
> + dev_err(formatter->dev, "Failed to init pads\n");
> + return ret;
> + }
> +
> + ret = v4l2_subdev_init_finalize(sd);
> + if (ret)
> + media_entity_cleanup(&sd->entity);
> +
> + return ret;
> +}
> +
> +static inline struct csi_formatter *
> +notifier_to_csi_formatter(struct v4l2_async_notifier *n)
> +{
> + return container_of(n, struct csi_formatter, notifier);
> +}
> +
> +static int csi_formatter_notify_bound(struct v4l2_async_notifier *notifier,
> + struct v4l2_subdev *sd,
> + struct v4l2_async_connection *asc)
> +{
> + const unsigned int link_flags = MEDIA_LNK_FL_IMMUTABLE
> + | MEDIA_LNK_FL_ENABLED;
> + struct csi_formatter *formatter = notifier_to_csi_formatter(notifier);
> + struct v4l2_subdev *sdev = &formatter->sd;
> + struct media_pad *sink = &sdev->entity.pads[CSI_FORMATTER_PAD_SINK];
> + struct media_pad *remote_pad;
> + int ret;
> +
> + formatter->csi_sd = sd;
> +
> + dev_dbg(formatter->dev, "Bound subdev: %s pad\n", sd->name);
> +
> + ret = v4l2_create_fwnode_links_to_pad(sd, sink, link_flags);
> + if (ret < 0)
> + return ret;
> +
> + remote_pad = media_pad_remote_pad_first(sink);
> + if (!remote_pad) {
> + dev_err(formatter->dev, "Pipe not setup correctly\n");
> + return -EPIPE;
> + }
> + formatter->remote_pad = remote_pad->index;
> +
> + return 0;
> +}
> +
> +static const struct v4l2_async_notifier_operations formatter_notify_ops = {
> + .bound = csi_formatter_notify_bound,
> +};
> +
> +static int csi_formatter_async_register(struct csi_formatter *formatter)
> +{
> + struct device *dev = formatter->dev;
> + struct v4l2_async_connection *asc;
> + int ret;
> +
> + struct fwnode_handle *ep __free(fwnode_handle) =
> + fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0,
> + FWNODE_GRAPH_ENDPOINT_NEXT);
> + if (!ep)
> + return -ENOTCONN;
> +
> + v4l2_async_subdev_nf_init(&formatter->notifier, &formatter->sd);
> +
> + asc = v4l2_async_nf_add_fwnode_remote(&formatter->notifier, ep,
> + struct v4l2_async_connection);
> + if (IS_ERR(asc)) {
> + ret = PTR_ERR(asc);
> + goto err_cleanup_notifier;
> + }
> +
> + formatter->notifier.ops = &formatter_notify_ops;
> +
> + ret = v4l2_async_nf_register(&formatter->notifier);
> + if (ret)
> + goto err_cleanup_notifier;
> +
> + ret = v4l2_async_register_subdev(&formatter->sd);
> + if (ret)
> + goto err_unregister_notifier;
> +
> + return 0;
> +
> +err_unregister_notifier:
> + v4l2_async_nf_unregister(&formatter->notifier);
> +err_cleanup_notifier:
> + v4l2_async_nf_cleanup(&formatter->notifier);
> + return ret;
> +}
> +
> +static void csi_formatter_async_unregister(struct csi_formatter *formatter)
> +{
> + v4l2_async_unregister_subdev(&formatter->sd);
> + v4l2_async_nf_unregister(&formatter->notifier);
> + v4l2_async_nf_cleanup(&formatter->notifier);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Suspend/resume
> + */
> +
> +static int csi_formatter_runtime_suspend(struct device *dev)
> +{
> + struct v4l2_subdev *sd = dev_get_drvdata(dev);
> + struct csi_formatter *formatter = sd_to_formatter(sd);
> +
> + clk_disable_unprepare(formatter->clk);
> +
> + return 0;
> +}
> +
> +static int csi_formatter_runtime_resume(struct device *dev)
> +{
> + struct v4l2_subdev *sd = dev_get_drvdata(dev);
> + struct csi_formatter *formatter = sd_to_formatter(sd);
> +
> + return clk_prepare_enable(formatter->clk);
> +}
> +
> +static DEFINE_RUNTIME_DEV_PM_OPS(csi_formatter_pm_ops,
> + csi_formatter_runtime_suspend,
> + csi_formatter_runtime_resume, NULL);
> +
> +static int csi_formatter_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct csi_formatter *formatter;
> + u32 val;
> + int ret;
> +
> + formatter = devm_kzalloc(dev, sizeof(*formatter), GFP_KERNEL);
> + if (!formatter)
> + return -ENOMEM;
> +
> + formatter->dev = dev;
> +
> + ret = devm_mutex_init(dev, &formatter->lock);
> + if (ret)
> + return ret;
> +
> + formatter->regs = syscon_node_to_regmap(dev->parent->of_node);
> + if (IS_ERR(formatter->regs))
> + return dev_err_probe(dev, PTR_ERR(formatter->regs),
> + "Failed to get csi formatter regmap\n");
> +
> + ret = of_property_read_u32(dev->of_node, "reg", &val);
> + if (ret < 0)
> + return dev_err_probe(dev, ret,
> + "Failed to get csi formatter reg property\n");
> +
> + formatter->reg_offset = val;
> +
> + formatter->clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(formatter->clk))
> + return dev_err_probe(dev, PTR_ERR(formatter->clk),
> + "Failed to get pixel clock\n");
> +
> + ret = csi_formatter_subdev_init(formatter);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "Failed to initialize formatter subdev\n");
> +
> + platform_set_drvdata(pdev, &formatter->sd);
> +
> + /* Enable runtime PM. */
> + ret = devm_pm_runtime_enable(dev);
> + if (ret)
> + goto err_cleanup_subdev;
> +
> + ret = csi_formatter_async_register(formatter);
> + if (ret < 0) {
> + dev_err_probe(dev, ret, "Failed to register async subdevice\n");
> + goto err_cleanup_subdev;
> + }
> +
> + return 0;
> +
> +err_cleanup_subdev:
> + v4l2_subdev_cleanup(&formatter->sd);
> + media_entity_cleanup(&formatter->sd.entity);
> + return ret;
> +}
> +
> +static void csi_formatter_remove(struct platform_device *pdev)
> +{
> + struct v4l2_subdev *sd = platform_get_drvdata(pdev);
> + struct csi_formatter *formatter = sd_to_formatter(sd);
> +
> + csi_formatter_async_unregister(formatter);
> +
> + v4l2_subdev_cleanup(&formatter->sd);
> + media_entity_cleanup(&formatter->sd.entity);
> +}
> +
> +static const struct of_device_id csi_formatter_of_match[] = {
> + { .compatible = "fsl,imx95-csi-formatter" },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, csi_formatter_of_match);
> +
> +static struct platform_driver csi_formatter_device_driver = {
> + .driver = {
> + .name = "csi-pixel-formatter",
> + .of_match_table = csi_formatter_of_match,
> + .pm = pm_ptr(&csi_formatter_pm_ops),
> + },
> + .probe = csi_formatter_probe,
> + .remove = csi_formatter_remove,
> +};
> +
> +module_platform_driver(csi_formatter_device_driver);
> +
> +MODULE_AUTHOR("NXP Semiconductor, Inc.");
> +MODULE_DESCRIPTION("NXP i.MX95 CSI Pixel Formatter driver");
> +MODULE_LICENSE("GPL");
>
> --
> 2.34.1
>
^ permalink raw reply
* [PATCH v3 net-next 2/6] net: ti: icssg-stats: Move long delayed work on system_dfl_long_wq
From: Marco Crivellari @ 2026-07-20 10:08 UTC (permalink / raw)
To: linux-kernel, netdev
Cc: Tejun Heo, Lai Jiangshan, Frederic Weisbecker,
Sebastian Andrzej Siewior, Marco Crivellari, Michal Hocko,
Andrew Lunn, David S . Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, MD Danish Anwar, Roger Quadros, linux-arm-kernel,
Richard Cheng
In-Reply-To: <20260720100902.155605-1-marco.crivellari@suse.com>
Currently the code enqueue work items using {queue|mod}_delayed_work(),
using system_long_wq. This workqueue should be used when long works are
expected and it is a per-cpu workqueue.
The function(s) end up calling __queue_delayed_work(), which set a global
timer that could fire anywhere, enqueuing the work where the timer fired.
Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption. Long work shouldn't stick to a single
CPU.
Recently, a new unbound workqueue specific for long running work has
been added:
c116737e972e ("workqueue: Add system_dfl_long_wq for long unbound works")
Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change
system_long_wq with system_dfl_long_wq so that the work may benefit from
scheduler task placement.
Cc: MD Danish Anwar <danishanwar@ti.com>
Cc: Roger Quadros <rogerq@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Richard Cheng <icheng@nvidia.com>
---
drivers/net/ethernet/ti/icssg/icssg_stats.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ti/icssg/icssg_stats.c b/drivers/net/ethernet/ti/icssg/icssg_stats.c
index 7159baa0155c..7d6d6692d819 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_stats.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_stats.c
@@ -69,7 +69,7 @@ void icssg_stats_work_handler(struct work_struct *work)
stats_work.work);
emac_update_hardware_stats(emac);
- queue_delayed_work(system_long_wq, &emac->stats_work,
+ queue_delayed_work(system_dfl_long_wq, &emac->stats_work,
msecs_to_jiffies((STATS_TIME_LIMIT_1G_MS * 1000) / emac->speed));
}
EXPORT_SYMBOL_GPL(icssg_stats_work_handler);
--
2.54.0
^ permalink raw reply related
* [PATCH v2 1/2] kselftest/arm64: Add seccomp ptrace x0 bypass test
From: Jinjie Ruan @ 2026-07-20 8:51 UTC (permalink / raw)
To: catalin.marinas, will, shuah, linux-kernel, linux-arm-kernel,
linux-kselftest
Cc: ruanjinjie
In-Reply-To: <20260720085145.247690-1-ruanjinjie@huawei.com>
As Kees suggested, add a test that verifies that seccomp observes the
correct first argument after a ptracer modifies x0 at a syscall-enter-stop
on arm64.
The first syscall argument and the return value share register x0.
The original value is saved in orig_x0 on entry and used by
syscall_get_arguments(), but ptrace changes to x0 were not
automatically reflected there. This test checks the kernel re-syncs
orig_x0 after a ptrace stop so that seccomp sees the modified
argument.
A seccomp filter allows write(2,...) and kills the task for any other
fd. The tracer changes fd from 2 to 1 at entry. If orig_x0 remains
stale, the child exits normally (bypass, test fails). If orig_x0 is
correctly updated, the child is killed by SIGSYS (test passes).
Before the fix:
./seccomp_ptrace_x0_bypass
TAP version 13
1..1
not ok 1 seccomp_ptrace_x0_bypass
# Totals: pass:0 fail:1 xfail:0 xpass:0 skip:0 error:0
After the fix:
# ./seccomp_ptrace_x0_bypass
TAP version 13
1..1
[ 19.475951] audit: type=1326 audit(1784254846.284:2): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=227 comm="seccomp_ptrace_" exe="/mnt/seccomp0
[ 19.477852] audit: type=1701 audit(1784254846.284:3): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=227 comm="seccomp_ptrace_" exe="/mnt/seccomp1
ok 1 seccomp_ptrace_x0_bypass
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Cc: Kees Cook <kees@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/all/20260716120640.6590-1-will@kernel.org/
Link: https://lore.kernel.org/all/202607152004.DEA95D63@keescook/
Suggested-by: Kees Cook <kees@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
---
tools/testing/selftests/arm64/abi/.gitignore | 1 +
tools/testing/selftests/arm64/abi/Makefile | 2 +-
.../arm64/abi/seccomp_ptrace_x0_bypass.c | 181 ++++++++++++++++++
3 files changed, 183 insertions(+), 1 deletion(-)
create mode 100644 tools/testing/selftests/arm64/abi/seccomp_ptrace_x0_bypass.c
diff --git a/tools/testing/selftests/arm64/abi/.gitignore b/tools/testing/selftests/arm64/abi/.gitignore
index 44f8b80f37e3..39129a9907c7 100644
--- a/tools/testing/selftests/arm64/abi/.gitignore
+++ b/tools/testing/selftests/arm64/abi/.gitignore
@@ -1,4 +1,5 @@
hwcap
ptrace
+seccomp_ptrace_x0_bypass
syscall-abi
tpidr2
diff --git a/tools/testing/selftests/arm64/abi/Makefile b/tools/testing/selftests/arm64/abi/Makefile
index 483488f8c2ad..5a16db379bd4 100644
--- a/tools/testing/selftests/arm64/abi/Makefile
+++ b/tools/testing/selftests/arm64/abi/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
# Copyright (C) 2021 ARM Limited
-TEST_GEN_PROGS := hwcap ptrace syscall-abi tpidr2
+TEST_GEN_PROGS := hwcap ptrace syscall-abi tpidr2 seccomp_ptrace_x0_bypass
include ../../lib.mk
diff --git a/tools/testing/selftests/arm64/abi/seccomp_ptrace_x0_bypass.c b/tools/testing/selftests/arm64/abi/seccomp_ptrace_x0_bypass.c
new file mode 100644
index 000000000000..718d3dcb3264
--- /dev/null
+++ b/tools/testing/selftests/arm64/abi/seccomp_ptrace_x0_bypass.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Test that seccomp, tracepoints and audit observe the correct syscall
+ * arguments after a ptracer has modified them at syscall-enter-stop.
+ *
+ * On arm64, both the first argument and the return value of a syscall
+ * are passed in register x0. The original x0 is saved in
+ * pt_regs::orig_x0 during syscall entry and returned as the first
+ * argument by syscall_get_arguments(). Because ptrace modifications
+ * to x0 are not automatically reflected in orig_x0, seccomp, tracepoints
+ * and audit may see a stale value unless orig_x0 is explicitly
+ * re-synchronised after a ptrace stop.
+ *
+ * This test sets up a seccomp filter that allows write(2, ...) but kills
+ * the task for any other fd. A ptracer changes the fd argument from 2
+ * to 1 at the syscall-enter stop. If the orig_x0 re-sync works, seccomp
+ * sees the modified argument (fd=1) and kills the child with SIGSYS
+ * (test passes). If orig_x0 is not re-synced, seccomp sees the original
+ * fd=2, the write succeeds and the child exits normally (test fails,
+ * vulnerability present).
+ */
+#include <errno.h>
+#include <stdbool.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/prctl.h>
+#include <sys/ptrace.h>
+#include <sys/uio.h>
+#include <sys/wait.h>
+#include <asm/ptrace.h>
+#include <linux/elf.h>
+#include <linux/filter.h>
+#include <linux/seccomp.h>
+
+#include "kselftest.h"
+
+#ifndef __NR_write
+#define __NR_write 64
+#endif
+
+#define EXPECTED_TESTS 1
+
+static int do_child(void)
+{
+ if (ptrace(PTRACE_TRACEME, 0, NULL, NULL))
+ ksft_exit_fail_perror("PTRACE_TRACEME");
+
+ if (raise(SIGSTOP))
+ ksft_exit_fail_perror("raise(SIGSTOP)");
+
+ /*
+ * Seccomp filter:
+ * If syscall is not write -> ALLOW
+ * If syscall is write:
+ * - If args[0] (fd) == 2 -> ALLOW
+ * - Otherwise -> KILL
+ */
+ struct sock_filter filter[] = {
+ BPF_STMT(BPF_LD | BPF_W | BPF_ABS, 0), /* nr */
+ BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, __NR_write, 0, 3),
+ BPF_STMT(BPF_LD | BPF_W | BPF_ABS, 16), /* args[0] */
+ BPF_JUMP(BPF_JMP | BPF_JEQ | BPF_K, 2, 1, 0),
+ BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_KILL),
+ BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_ALLOW),
+ };
+ struct sock_fprog prog = {
+ .len = ARRAY_SIZE(filter),
+ .filter = filter,
+ };
+
+ if (prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0))
+ ksft_exit_fail_perror("prctl NO_NEW_PRIVS");
+
+ if (prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &prog))
+ ksft_exit_fail_perror("prctl SECCOMP");
+
+ /*
+ * Invoke write(2, ...) while the tracer will change the first
+ * argument (fd) from 2 to 1 at syscall entry.
+ */
+ syscall(__NR_write, 2, NULL, 0);
+ _exit(0);
+}
+
+static int do_parent(pid_t child)
+{
+ bool bypass = false;
+ int status;
+
+ /* Wait for the initial SIGSTOP */
+ if (waitpid(child, &status, 0) != child)
+ ksft_exit_fail_msg("waitpid failed");
+
+ if (!WIFSTOPPED(status) || WSTOPSIG(status) != SIGSTOP)
+ ksft_exit_fail_msg("unexpected stop status");
+
+ if (ptrace(PTRACE_SETOPTIONS, child, 0, PTRACE_O_TRACESYSGOOD))
+ ksft_exit_fail_perror("PTRACE_SETOPTIONS");
+
+ if (ptrace(PTRACE_SYSCALL, child, 0, 0))
+ ksft_exit_fail_perror("PTRACE_SYSCALL");
+
+ while (1) {
+ int sig;
+
+ if (waitpid(child, &status, 0) != child)
+ ksft_exit_fail_msg("waitpid lost child");
+
+ if (WIFEXITED(status)) {
+ /* Child exited normally – bypass succeeded */
+ bypass = true;
+ break;
+ }
+
+ if (WIFSIGNALED(status))
+ break;
+
+ if (!WIFSTOPPED(status))
+ ksft_exit_fail_msg("unexpected wait status");
+
+ sig = WSTOPSIG(status);
+
+ if (sig == (SIGTRAP | 0x80)) {
+ struct user_regs_struct regs;
+ struct iovec iov = {
+ .iov_base = ®s,
+ .iov_len = sizeof(regs),
+ };
+
+ if (ptrace(PTRACE_GETREGSET, child, NT_PRSTATUS, &iov))
+ ksft_exit_fail_perror("PTRACE_GETREGSET");
+
+ unsigned long syscall_nr = regs.regs[8];
+ unsigned long x0 = regs.regs[0];
+
+ /* Modify fd from 2 to 1 at write entry */
+ if (syscall_nr == __NR_write && x0 == 2) {
+ regs.regs[0] = 1;
+ if (ptrace(PTRACE_SETREGSET, child, NT_PRSTATUS, &iov))
+ ksft_exit_fail_perror("PTRACE_SETREGSET");
+ }
+
+ if (ptrace(PTRACE_SYSCALL, child, 0, 0))
+ ksft_exit_fail_perror("PTRACE_SYSCALL");
+ } else {
+ /* Forward other signals */
+ if (ptrace(PTRACE_SYSCALL, child, 0, sig))
+ ksft_exit_fail_perror("PTRACE_SYSCALL");
+ }
+ }
+
+ /* bypass == true means vulnerability exists -> test fails */
+ return bypass ? EXIT_FAILURE : EXIT_SUCCESS;
+}
+
+int main(void)
+{
+ pid_t child;
+
+ ksft_print_header();
+ ksft_set_plan(EXPECTED_TESTS);
+
+ child = fork();
+ if (!child)
+ return do_child();
+
+ /*
+ * do_parent() returns EXIT_SUCCESS if the child was killed by
+ * SIGSYS (i.e. seccomp correctly saw the modified argument),
+ * and EXIT_FAILURE if the child exited normally (bypass).
+ */
+ int result = do_parent(child);
+
+ ksft_test_result(result == EXIT_SUCCESS, "seccomp_ptrace_x0_bypass\n");
+
+ ksft_print_cnts();
+ return result;
+}
--
2.34.1
^ permalink raw reply related
* [PATCH v3 16/18] clk: mediatek: Add MT8189 i2c clock support
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Irving-CH Lin, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Add support for the MT8189 i2c clock controller,
which provides clock gate control for i2c.
Co-developed-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Co-developed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
drivers/clk/mediatek/Kconfig | 13 ++++
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt8189-iic.c | 122 ++++++++++++++++++++++++++++++++++
3 files changed, 136 insertions(+)
diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 245d3b83b5d3..bba631138b07 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -859,6 +859,19 @@ config COMMON_CLK_MT8189_DVFSRC
vcore dvfs clocks. If you want to control its clocks, say Y or M
to include this driver in your kernel build.
+config COMMON_CLK_MT8189_IIC
+ tristate "Clock driver for MediaTek MT8189 iic"
+ depends on COMMON_CLK_MT8189
+ default COMMON_CLK_MT8189
+ help
+ Enable this option to support the clock framework for MediaTek MT8189
+ integrated circuits (iic). This driver is responsible for managing
+ clock sources, dividers, and gates specifically designed for MT8189
+ SoCs. Enabling this driver ensures that the system can correctly
+ manage clock frequencies and power for various components within
+ the MT8189 chipset, improving the overall performance and power
+ efficiency of the device.
+
config COMMON_CLK_MT8192
tristate "Clock driver for MediaTek MT8192"
depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 4dbfc9ac83ba..bfc075023d9b 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -128,6 +128,7 @@ obj-$(CONFIG_COMMON_CLK_MT8189) += clk-mt8189-apmixedsys.o clk-mt8189-topckgen.o
obj-$(CONFIG_COMMON_CLK_MT8189_BUS) += clk-mt8189-bus.o
obj-$(CONFIG_COMMON_CLK_MT8189_DBGAO) += clk-mt8189-dbgao.o
obj-$(CONFIG_COMMON_CLK_MT8189_DVFSRC) += clk-mt8189-dvfsrc.o
+obj-$(CONFIG_COMMON_CLK_MT8189_IIC) += clk-mt8189-iic.o
obj-$(CONFIG_COMMON_CLK_MT8192) += clk-mt8192-apmixedsys.o clk-mt8192.o
obj-$(CONFIG_COMMON_CLK_MT8192_AUDSYS) += clk-mt8192-aud.o
obj-$(CONFIG_COMMON_CLK_MT8192_CAMSYS) += clk-mt8192-cam.o
diff --git a/drivers/clk/mediatek/clk-mt8189-iic.c b/drivers/clk/mediatek/clk-mt8189-iic.c
new file mode 100644
index 000000000000..80a01706791a
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8189-iic.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025-2026 MediaTek Inc.
+ * Qiqi Wang <qiqi.wang@mediatek.com>
+ * Irving-CH Lin <irving-ch.lin@mediatek.com>
+ * Copyright (C) 2026 Collabora Ltd.
+ * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ * Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mediatek,mt8189-clk.h>
+
+static const struct mtk_gate_regs impe_cg_regs = {
+ .set_ofs = 0x8,
+ .clr_ofs = 0x4,
+ .sta_ofs = 0x0,
+};
+
+#define GATE_IMPE(_id, _name, _parent, _shift) \
+ GATE_MTK_FLAGS(_id, _name, _parent, &impe_cg_regs, _shift, \
+ &mtk_clk_gate_ops_setclr, CLK_OPS_PARENT_ENABLE)
+
+static const struct mtk_gate impe_clks[] = {
+ GATE_IMPE(CLK_IMPE_I2C0, "impe_i2c0", "i2c_sel", 0),
+ GATE_IMPE(CLK_IMPE_I2C1, "impe_i2c1", "i2c_sel", 1),
+};
+
+static const struct mtk_clk_desc impe_mcd = {
+ .clks = impe_clks,
+ .num_clks = ARRAY_SIZE(impe_clks),
+};
+
+static const struct mtk_gate_regs impen_cg_regs = {
+ .set_ofs = 0x8,
+ .clr_ofs = 0x4,
+ .sta_ofs = 0x0,
+};
+
+#define GATE_IMPEN(_id, _name, _parent, _shift) \
+ GATE_MTK_FLAGS(_id, _name, _parent, &impen_cg_regs, _shift, \
+ &mtk_clk_gate_ops_setclr, CLK_OPS_PARENT_ENABLE)
+
+static const struct mtk_gate impen_clks[] = {
+ GATE_IMPEN(CLK_IMPEN_I2C7, "impen_i2c7", "i2c_sel", 0),
+ GATE_IMPEN(CLK_IMPEN_I2C8, "impen_i2c8", "i2c_sel", 1),
+};
+
+static const struct mtk_clk_desc impen_mcd = {
+ .clks = impen_clks,
+ .num_clks = ARRAY_SIZE(impen_clks),
+};
+
+static const struct mtk_gate_regs imps_cg_regs = {
+ .set_ofs = 0x8,
+ .clr_ofs = 0x4,
+ .sta_ofs = 0x0,
+};
+
+#define GATE_IMPS(_id, _name, _parent, _shift) \
+ GATE_MTK_FLAGS(_id, _name, _parent, &imps_cg_regs, _shift, \
+ &mtk_clk_gate_ops_setclr, CLK_OPS_PARENT_ENABLE)
+
+static const struct mtk_gate imps_clks[] = {
+ GATE_IMPS(CLK_IMPS_I2C3, "imps_i2c3", "i2c_sel", 0),
+ GATE_IMPS(CLK_IMPS_I2C4, "imps_i2c4", "i2c_sel", 1),
+ GATE_IMPS(CLK_IMPS_I2C5, "imps_i2c5", "i2c_sel", 2),
+ GATE_IMPS(CLK_IMPS_I2C6, "imps_i2c6", "i2c_sel", 3),
+};
+
+static const struct mtk_clk_desc imps_mcd = {
+ .clks = imps_clks,
+ .num_clks = ARRAY_SIZE(imps_clks),
+};
+
+static const struct mtk_gate_regs impws_cg_regs = {
+ .set_ofs = 0x8,
+ .clr_ofs = 0x4,
+ .sta_ofs = 0x0,
+};
+
+#define GATE_IMPWS(_id, _name, _parent, _shift) \
+ GATE_MTK_FLAGS(_id, _name, _parent, &impws_cg_regs, _shift, \
+ &mtk_clk_gate_ops_setclr, CLK_OPS_PARENT_ENABLE)
+
+static const struct mtk_gate impws_clks[] = {
+ GATE_IMPWS(CLK_IMPWS_I2C2, "impws_i2c2", "i2c_sel", 0),
+};
+
+static const struct mtk_clk_desc impws_mcd = {
+ .clks = impws_clks,
+ .num_clks = ARRAY_SIZE(impws_clks),
+};
+
+static const struct of_device_id of_match_clk_mt8189_iic[] = {
+ { .compatible = "mediatek,mt8189-iic-wrap-e", .data = &impe_mcd },
+ { .compatible = "mediatek,mt8189-iic-wrap-en", .data = &impen_mcd },
+ { .compatible = "mediatek,mt8189-iic-wrap-s", .data = &imps_mcd },
+ { .compatible = "mediatek,mt8189-iic-wrap-ws", .data = &impws_mcd },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_match_clk_mt8189_iic);
+
+static struct platform_driver clk_mt8189_iic_drv = {
+ .probe = mtk_clk_simple_probe,
+ .remove = mtk_clk_simple_remove,
+ .driver = {
+ .name = "clk-mt8189-iic",
+ .of_match_table = of_match_clk_mt8189_iic,
+ },
+};
+module_platform_driver(clk_mt8189_iic_drv);
+
+MODULE_DESCRIPTION("MediaTek MT8189 iic clocks driver");
+MODULE_LICENSE("GPL");
--
2.55.0
^ permalink raw reply related
* [PATCH v3 15/18] clk: mediatek: Add MT8189 dvfsrc clock support
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Irving-CH Lin, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Add support for the MT8189 dvfsrc clock controller,
which provides clock gate control for dram dvfs.
Co-developed-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Co-developed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
drivers/clk/mediatek/Kconfig | 10 ++++++
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt8189-dvfsrc.c | 58 ++++++++++++++++++++++++++++++++
3 files changed, 69 insertions(+)
diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 635b0109ec07..245d3b83b5d3 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -849,6 +849,16 @@ config COMMON_CLK_MT8189_DBGAO
vcore debug system clocks. If you want to control its clocks, say Y or M
to include this driver in your kernel build.
+config COMMON_CLK_MT8189_DVFSRC
+ tristate "Clock driver for MediaTek MT8189 dvfsrc"
+ depends on COMMON_CLK_MT8189
+ default COMMON_CLK_MT8189
+ help
+ Enable this to support the clock management for the dvfsrc
+ on MediaTek MT8189 SoCs. This includes enabling and disabling
+ vcore dvfs clocks. If you want to control its clocks, say Y or M
+ to include this driver in your kernel build.
+
config COMMON_CLK_MT8192
tristate "Clock driver for MediaTek MT8192"
depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 6ab6df7ebf2a..4dbfc9ac83ba 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -127,6 +127,7 @@ obj-$(CONFIG_COMMON_CLK_MT8189) += clk-mt8189-apmixedsys.o clk-mt8189-topckgen.o
clk-mt8189-vlpckgen.o clk-mt8189-vlpcfg.o
obj-$(CONFIG_COMMON_CLK_MT8189_BUS) += clk-mt8189-bus.o
obj-$(CONFIG_COMMON_CLK_MT8189_DBGAO) += clk-mt8189-dbgao.o
+obj-$(CONFIG_COMMON_CLK_MT8189_DVFSRC) += clk-mt8189-dvfsrc.o
obj-$(CONFIG_COMMON_CLK_MT8192) += clk-mt8192-apmixedsys.o clk-mt8192.o
obj-$(CONFIG_COMMON_CLK_MT8192_AUDSYS) += clk-mt8192-aud.o
obj-$(CONFIG_COMMON_CLK_MT8192_CAMSYS) += clk-mt8192-cam.o
diff --git a/drivers/clk/mediatek/clk-mt8189-dvfsrc.c b/drivers/clk/mediatek/clk-mt8189-dvfsrc.c
new file mode 100644
index 000000000000..37b81dc0b882
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8189-dvfsrc.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025-2026 MediaTek Inc.
+ * Qiqi Wang <qiqi.wang@mediatek.com>
+ * Irving-CH Lin <irving-ch.lin@mediatek.com>
+ * Copyright (C) 2026 Collabora Ltd.
+ * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ * Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mediatek,mt8189-clk.h>
+
+static const struct mtk_gate_regs dvfsrc_top_cg_regs = {
+ .set_ofs = 0x0,
+ .clr_ofs = 0x0,
+ .sta_ofs = 0x0,
+};
+
+#define GATE_DVFSRC_TOP_FLAGS(_id, _name, _parent, _shift, _flags) \
+ GATE_MTK_FLAGS(_id, _name, _parent, &dvfsrc_top_cg_regs, _shift, \
+ &mtk_clk_gate_ops_no_setclr_inv, _flags)
+
+static const struct mtk_gate dvfsrc_top_clks[] = {
+ GATE_DVFSRC_TOP_FLAGS(CLK_DVFSRC_TOP_DVFSRC_EN, "dvfsrc_dvfsrc_en",
+ "clk26m", 0, CLK_IS_CRITICAL),
+};
+
+static const struct mtk_clk_desc dvfsrc_top_mcd = {
+ .clks = dvfsrc_top_clks,
+ .num_clks = ARRAY_SIZE(dvfsrc_top_clks),
+};
+
+static const struct of_device_id of_match_clk_mt8189_dvfsrc[] = {
+ { .compatible = "mediatek,mt8189-dvfsrc-top", .data = &dvfsrc_top_mcd },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_match_clk_mt8189_dvfsrc);
+
+static struct platform_driver clk_mt8189_dvfsrc_drv = {
+ .probe = mtk_clk_simple_probe,
+ .remove = mtk_clk_simple_remove,
+ .driver = {
+ .name = "clk-mt8189-dvfsrc",
+ .of_match_table = of_match_clk_mt8189_dvfsrc,
+ },
+};
+module_platform_driver(clk_mt8189_dvfsrc_drv);
+
+MODULE_DESCRIPTION("MediaTek MT8189 dvfsrc clocks driver");
+MODULE_LICENSE("GPL");
--
2.55.0
^ permalink raw reply related
* [PATCH v3 17/18] clk: mediatek: Add MT8189 scp clock support
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Irving-CH Lin, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Add support for the MT8189 scp clock controller,
which provides clock gate control for System Control Processor.
Co-developed-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Co-developed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
drivers/clk/mediatek/Kconfig | 10 +++++
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt8189-scp.c | 77 +++++++++++++++++++++++++++++++++++
3 files changed, 88 insertions(+)
diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index bba631138b07..919a916f1f4f 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -872,6 +872,16 @@ config COMMON_CLK_MT8189_IIC
the MT8189 chipset, improving the overall performance and power
efficiency of the device.
+config COMMON_CLK_MT8189_SCP
+ tristate "Clock driver for MediaTek MT8189 scp"
+ depends on COMMON_CLK_MT8189
+ default COMMON_CLK_MT8189
+ help
+ Enable this to support the clock framework for the System Control
+ Processor (SCP) in the MediaTek MT8189 SoC. This includes clock
+ management for SCP-related features, ensuring proper clock
+ distribution and gating for power efficiency and functionality.
+
config COMMON_CLK_MT8192
tristate "Clock driver for MediaTek MT8192"
depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index bfc075023d9b..a3a93a16b369 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -129,6 +129,7 @@ obj-$(CONFIG_COMMON_CLK_MT8189_BUS) += clk-mt8189-bus.o
obj-$(CONFIG_COMMON_CLK_MT8189_DBGAO) += clk-mt8189-dbgao.o
obj-$(CONFIG_COMMON_CLK_MT8189_DVFSRC) += clk-mt8189-dvfsrc.o
obj-$(CONFIG_COMMON_CLK_MT8189_IIC) += clk-mt8189-iic.o
+obj-$(CONFIG_COMMON_CLK_MT8189_SCP) += clk-mt8189-scp.o
obj-$(CONFIG_COMMON_CLK_MT8192) += clk-mt8192-apmixedsys.o clk-mt8192.o
obj-$(CONFIG_COMMON_CLK_MT8192_AUDSYS) += clk-mt8192-aud.o
obj-$(CONFIG_COMMON_CLK_MT8192_CAMSYS) += clk-mt8192-cam.o
diff --git a/drivers/clk/mediatek/clk-mt8189-scp.c b/drivers/clk/mediatek/clk-mt8189-scp.c
new file mode 100644
index 000000000000..75197cd98b52
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8189-scp.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025-2026 MediaTek Inc.
+ * Qiqi Wang <qiqi.wang@mediatek.com>
+ * Irving-CH Lin <irving-ch.lin@mediatek.com>
+ * Copyright (C) 2026 Collabora Ltd.
+ * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ * Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mediatek,mt8189-clk.h>
+
+static const struct mtk_gate_regs scp_cg_regs = {
+ .set_ofs = 0x4,
+ .clr_ofs = 0x8,
+ .sta_ofs = 0x4,
+};
+
+#define GATE_SCP(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &scp_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
+
+static const struct mtk_gate scp_clks[] = {
+ GATE_SCP(CLK_SCP_SET_SPI0, "scp_set_spi0", "clk26m", 0),
+ GATE_SCP(CLK_SCP_SET_SPI1, "scp_set_spi1", "clk26m", 1),
+};
+
+static const struct mtk_clk_desc scp_mcd = {
+ .clks = scp_clks,
+ .num_clks = ARRAY_SIZE(scp_clks),
+};
+
+static const struct mtk_gate_regs scp_iic_cg_regs = {
+ .set_ofs = 0x8,
+ .clr_ofs = 0x4,
+ .sta_ofs = 0x0,
+};
+
+#define GATE_SCP_IIC(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &scp_iic_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
+
+static const struct mtk_gate scp_iic_clks[] = {
+ GATE_SCP_IIC(CLK_SCP_IIC_I2C0_W1S, "scp_iic_i2c0_w1s", "vlp_scp_iic_sel", 0),
+ GATE_SCP_IIC(CLK_SCP_IIC_I2C1_W1S, "scp_iic_i2c1_w1s", "vlp_scp_iic_sel", 1),
+};
+
+static const struct mtk_clk_desc scp_iic_mcd = {
+ .clks = scp_iic_clks,
+ .num_clks = ARRAY_SIZE(scp_iic_clks),
+};
+
+static const struct of_device_id of_match_clk_mt8189_scp[] = {
+ { .compatible = "mediatek,mt8189-scp-clk", .data = &scp_mcd },
+ { .compatible = "mediatek,mt8189-scp-i2c-clk", .data = &scp_iic_mcd },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_match_clk_mt8189_scp);
+
+static struct platform_driver clk_mt8189_scp_drv = {
+ .probe = mtk_clk_simple_probe,
+ .remove = mtk_clk_simple_remove,
+ .driver = {
+ .name = "clk-mt8189-scp",
+ .of_match_table = of_match_clk_mt8189_scp,
+ },
+};
+module_platform_driver(clk_mt8189_scp_drv);
+
+MODULE_DESCRIPTION("MediaTek MT8189 scp clocks driver");
+MODULE_LICENSE("GPL");
--
2.55.0
^ permalink raw reply related
* [PATCH v3 10/18] clk: mediatek: Add MT8189 topckgen clock support
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Irving-CH Lin, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Add support for the MT8189 topckgen clock controller, which provides
muxes and dividers for clock selection in other IP blocks.
Co-developed-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Co-developed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
drivers/clk/mediatek/Makefile | 2 +-
drivers/clk/mediatek/clk-mt8189-topckgen.c | 1025 ++++++++++++++++++++++++++++
2 files changed, 1026 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 66577ccb9b93..9d3d2983bfb2 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -123,7 +123,7 @@ obj-$(CONFIG_COMMON_CLK_MT8188_VDOSYS) += clk-mt8188-vdo0.o clk-mt8188-vdo1.o
obj-$(CONFIG_COMMON_CLK_MT8188_VENCSYS) += clk-mt8188-venc.o
obj-$(CONFIG_COMMON_CLK_MT8188_VPPSYS) += clk-mt8188-vpp0.o clk-mt8188-vpp1.o
obj-$(CONFIG_COMMON_CLK_MT8188_WPESYS) += clk-mt8188-wpe.o
-obj-$(CONFIG_COMMON_CLK_MT8189) += clk-mt8189-apmixedsys.o
+obj-$(CONFIG_COMMON_CLK_MT8189) += clk-mt8189-apmixedsys.o clk-mt8189-topckgen.o
obj-$(CONFIG_COMMON_CLK_MT8192) += clk-mt8192-apmixedsys.o clk-mt8192.o
obj-$(CONFIG_COMMON_CLK_MT8192_AUDSYS) += clk-mt8192-aud.o
obj-$(CONFIG_COMMON_CLK_MT8192_CAMSYS) += clk-mt8192-cam.o
diff --git a/drivers/clk/mediatek/clk-mt8189-topckgen.c b/drivers/clk/mediatek/clk-mt8189-topckgen.c
new file mode 100644
index 000000000000..2473b617e9d6
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8189-topckgen.c
@@ -0,0 +1,1025 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025-2026 MediaTek Inc.
+ * Qiqi Wang <qiqi.wang@mediatek.com>
+ * Irving-CH Lin <irving-ch.lin@mediatek.com>
+ * Copyright (C) 2026 Collabora Ltd.
+ * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ * Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "clk-mtk.h"
+#include "clk-mux.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mediatek,mt8189-clk.h>
+
+static DEFINE_SPINLOCK(mt8189_clk_lock);
+
+static const struct mtk_fixed_factor top_divs[] = {
+ FACTOR(CLK_TOP_MAINPLL_D3, "mainpll_d3", "mainpll", 1, 3),
+ FACTOR(CLK_TOP_MAINPLL_D4, "mainpll_d4", "mainpll", 1, 4),
+ FACTOR(CLK_TOP_MAINPLL_D4_D2, "mainpll_d4_d2", "mainpll", 1, 8),
+ FACTOR(CLK_TOP_MAINPLL_D4_D4, "mainpll_d4_d4", "mainpll", 1, 16),
+ FACTOR(CLK_TOP_MAINPLL_D4_D8, "mainpll_d4_d8", "mainpll", 43, 1375),
+ FACTOR(CLK_TOP_MAINPLL_D5, "mainpll_d5", "mainpll", 1, 5),
+ FACTOR(CLK_TOP_MAINPLL_D5_D2, "mainpll_d5_d2", "mainpll", 1, 10),
+ FACTOR(CLK_TOP_MAINPLL_D5_D4, "mainpll_d5_d4", "mainpll", 1, 20),
+ FACTOR(CLK_TOP_MAINPLL_D5_D8, "mainpll_d5_d8", "mainpll", 1, 40),
+ FACTOR(CLK_TOP_MAINPLL_D6, "mainpll_d6", "mainpll", 1, 6),
+ FACTOR(CLK_TOP_MAINPLL_D6_D2, "mainpll_d6_d2", "mainpll", 1, 12),
+ FACTOR(CLK_TOP_MAINPLL_D6_D4, "mainpll_d6_d4", "mainpll", 1, 24),
+ FACTOR(CLK_TOP_MAINPLL_D6_D8, "mainpll_d6_d8", "mainpll", 1, 48),
+ FACTOR(CLK_TOP_MAINPLL_D7, "mainpll_d7", "mainpll", 1, 7),
+ FACTOR(CLK_TOP_MAINPLL_D7_D2, "mainpll_d7_d2", "mainpll", 1, 14),
+ FACTOR(CLK_TOP_MAINPLL_D7_D4, "mainpll_d7_d4", "mainpll", 1, 28),
+ FACTOR(CLK_TOP_MAINPLL_D7_D8, "mainpll_d7_d8", "mainpll", 1, 56),
+ FACTOR(CLK_TOP_MAINPLL_D9, "mainpll_d9", "mainpll", 1, 9),
+ FACTOR(CLK_TOP_UNIVPLL_D2, "univpll_d2", "univpll", 1, 2),
+ FACTOR(CLK_TOP_UNIVPLL_D3, "univpll_d3", "univpll", 1, 3),
+ FACTOR(CLK_TOP_UNIVPLL_D4, "univpll_d4", "univpll", 1, 4),
+ FACTOR(CLK_TOP_UNIVPLL_D4_D2, "univpll_d4_d2", "univpll", 1, 8),
+ FACTOR(CLK_TOP_UNIVPLL_D4_D4, "univpll_d4_d4", "univpll", 1, 16),
+ FACTOR(CLK_TOP_UNIVPLL_D4_D8, "univpll_d4_d8", "univpll", 1, 32),
+ FACTOR(CLK_TOP_UNIVPLL_D5, "univpll_d5", "univpll", 1, 5),
+ FACTOR(CLK_TOP_UNIVPLL_D5_D2, "univpll_d5_d2", "univpll", 1, 10),
+ FACTOR(CLK_TOP_UNIVPLL_D5_D4, "univpll_d5_d4", "univpll", 1, 20),
+ FACTOR(CLK_TOP_UNIVPLL_D6, "univpll_d6", "univpll", 1, 6),
+ FACTOR(CLK_TOP_UNIVPLL_D6_D2, "univpll_d6_d2", "univpll", 1, 12),
+ FACTOR(CLK_TOP_UNIVPLL_D6_D4, "univpll_d6_d4", "univpll", 1, 24),
+ FACTOR(CLK_TOP_UNIVPLL_D6_D8, "univpll_d6_d8", "univpll", 1, 48),
+ FACTOR(CLK_TOP_UNIVPLL_D6_D16, "univpll_d6_d16", "univpll", 1, 96),
+ FACTOR(CLK_TOP_UNIVPLL_D7, "univpll_d7", "univpll", 1, 7),
+ FACTOR(CLK_TOP_UNIVPLL_D7_D2, "univpll_d7_d2", "univpll", 1, 14),
+ FACTOR(CLK_TOP_UNIVPLL_D7_D3, "univpll_d7_d3", "univpll", 1, 21),
+ FACTOR(CLK_TOP_LVDSTX_DG_CTS, "lvdstx_dg_cts", "univpll", 1, 21),
+ FACTOR(CLK_TOP_UNIVPLL_192M, "univpll_192m", "univpll", 1, 13),
+ FACTOR(CLK_TOP_UNIVPLL_192M_D2, "univpll_192m_d2", "univpll", 1, 26),
+ FACTOR(CLK_TOP_UNIVPLL_192M_D4, "univpll_192m_d4", "univpll", 1, 52),
+ FACTOR(CLK_TOP_UNIVPLL_192M_D8, "univpll_192m_d8", "univpll", 1, 104),
+ FACTOR(CLK_TOP_UNIVPLL_192M_D10, "univpll_192m_d10", "univpll", 1, 130),
+ FACTOR(CLK_TOP_UNIVPLL_192M_D16, "univpll_192m_d16", "univpll", 1, 208),
+ FACTOR(CLK_TOP_UNIVPLL_192M_D32, "univpll_192m_d32", "univpll", 1, 416),
+ FACTOR(CLK_TOP_APLL1_D2, "apll1_d2", "apll1", 1, 2),
+ FACTOR(CLK_TOP_APLL1_D4, "apll1_d4", "apll1", 1, 4),
+ FACTOR(CLK_TOP_APLL1_D8, "apll1_d8", "apll1", 1, 8),
+ FACTOR(CLK_TOP_APLL1_D3, "apll1_d3", "apll1", 1, 3),
+ FACTOR(CLK_TOP_APLL2_D2, "apll2_d2", "apll2", 1, 2),
+ FACTOR(CLK_TOP_APLL2_D4, "apll2_d4", "apll2", 1, 4),
+ FACTOR(CLK_TOP_APLL2_D8, "apll2_d8", "apll2", 1, 8),
+ FACTOR(CLK_TOP_APLL2_D3, "apll2_d3", "apll2", 1, 3),
+ FACTOR(CLK_TOP_MMPLL_D4, "mmpll_d4", "mmpll", 1, 4),
+ FACTOR(CLK_TOP_MMPLL_D4_D2, "mmpll_d4_d2", "mmpll", 1, 8),
+ FACTOR(CLK_TOP_MMPLL_D4_D4, "mmpll_d4_d4", "mmpll", 1, 16),
+ FACTOR(CLK_TOP_VPLL_DPIX, "vpll_dpix", "mmpll", 1, 16),
+ FACTOR(CLK_TOP_MMPLL_D5, "mmpll_d5", "mmpll", 1, 5),
+ FACTOR(CLK_TOP_MMPLL_D5_D2, "mmpll_d5_d2", "mmpll", 1, 10),
+ FACTOR(CLK_TOP_MMPLL_D5_D4, "mmpll_d5_d4", "mmpll", 1, 20),
+ FACTOR(CLK_TOP_MMPLL_D6, "mmpll_d6", "mmpll", 1, 6),
+ FACTOR(CLK_TOP_MMPLL_D6_D2, "mmpll_d6_d2", "mmpll", 1, 12),
+ FACTOR(CLK_TOP_MMPLL_D7, "mmpll_d7", "mmpll", 1, 7),
+ FACTOR(CLK_TOP_MMPLL_D9, "mmpll_d9", "mmpll", 1, 9),
+ FACTOR(CLK_TOP_TVDPLL1_D2, "tvdpll1_d2", "tvdpll1", 1, 2),
+ FACTOR(CLK_TOP_TVDPLL1_D4, "tvdpll1_d4", "tvdpll1", 1, 4),
+ FACTOR(CLK_TOP_TVDPLL1_D8, "tvdpll1_d8", "tvdpll1", 1, 8),
+ FACTOR(CLK_TOP_TVDPLL1_D16, "tvdpll1_d16", "tvdpll1", 92, 1473),
+ FACTOR(CLK_TOP_TVDPLL2_D2, "tvdpll2_d2", "tvdpll2", 1, 2),
+ FACTOR(CLK_TOP_TVDPLL2_D4, "tvdpll2_d4", "tvdpll2", 1, 4),
+ FACTOR(CLK_TOP_TVDPLL2_D8, "tvdpll2_d8", "tvdpll2", 1, 8),
+ FACTOR(CLK_TOP_TVDPLL2_D16, "tvdpll2_d16", "tvdpll2", 92, 1473),
+ FACTOR(CLK_TOP_ETHPLL_D2, "ethpll_d2", "ethpll", 1, 2),
+ FACTOR(CLK_TOP_ETHPLL_D8, "ethpll_d8", "ethpll", 1, 8),
+ FACTOR(CLK_TOP_ETHPLL_D10, "ethpll_d10", "ethpll", 1, 10),
+ FACTOR(CLK_TOP_MSDCPLL_D2, "msdcpll_d2", "msdcpll", 1, 2),
+ FACTOR(CLK_TOP_UFSPLL_D2, "ufspll_d2", "ufspll", 1, 2),
+ FACTOR(CLK_TOP_F26M_CK_D2, "f26m_d2", "clk26m", 1, 2),
+ FACTOR(CLK_TOP_OSC_D2, "osc_d2", "ulposc", 1, 2),
+ FACTOR(CLK_TOP_OSC_D4, "osc_d4", "ulposc", 1, 4),
+ FACTOR(CLK_TOP_OSC_D8, "osc_d8", "ulposc", 1, 8),
+ FACTOR(CLK_TOP_OSC_D16, "osc_d16", "ulposc", 61, 973),
+ FACTOR(CLK_TOP_OSC_D3, "osc_d3", "ulposc", 1, 3),
+ FACTOR(CLK_TOP_OSC_D7, "osc_d7", "ulposc", 1, 7),
+ FACTOR(CLK_TOP_OSC_D10, "osc_d10", "ulposc", 1, 10),
+ FACTOR(CLK_TOP_OSC_D20, "osc_d20", "ulposc", 1, 20),
+};
+
+static const char * const ap2conn_host_parents[] = {
+ "clk26m",
+ "mainpll_d7_d4"
+};
+
+static const char * const apll_m_parents[] = {
+ "aud_1_sel",
+ "aud_2_sel"
+};
+
+static const char * const aud_1_parents[] = {
+ "clk26m",
+ "apll1"
+};
+
+static const char * const aud_2_parents[] = {
+ "clk26m",
+ "apll2"
+};
+
+static const char * const mfg_sel_mfgpll_parents[] = {
+ "mfg_ref_sel",
+ "mfgpll"
+};
+
+static const char * const pwm_parents[] = {
+ "clk26m",
+ "univpll_d4_d8"
+};
+
+static const char * const snps_eth_250m_parents[] = {
+ "clk26m",
+ "ethpll_d2"
+};
+
+static const char * const snps_eth_50m_rmii_parents[] = {
+ "clk26m",
+ "ethpll_d10"
+};
+
+static const char * const uart_parents[] = {
+ "clk26m",
+ "univpll_d6_d8"
+};
+
+static const char * const atb_parents[] = {
+ "clk26m",
+ "mainpll_d4_d2",
+ "mainpll_d5_d2"
+};
+
+static const char * const aud_intbus_parents[] = {
+ "clk26m",
+ "mainpll_d4_d4",
+ "mainpll_d7_d4"
+};
+
+static const char * const msdc5hclk_parents[] = {
+ "clk26m",
+ "mainpll_d4_d2",
+ "mainpll_d6_d2"
+};
+
+static const char * const pcie_mac_tl_parents[] = {
+ "clk26m",
+ "mainpll_d4_d4",
+ "univpll_d5_d4"
+};
+
+static const char * const pll_dpix_parents[] = {
+ "clk26m",
+ "vpll_dpix",
+ "mmpll_d4_d4"
+};
+
+static const char * const usb_parents[] = {
+ "clk26m",
+ "univpll_d5_d4",
+ "univpll_d6_d4"
+};
+
+static const char * const vdstx_dg_cts_parents[] = {
+ "clk26m",
+ "lvdstx_dg_cts",
+ "univpll_d7_d3"
+};
+
+static const char * const audio_h_parents[] = {
+ "clk26m",
+ "univpll_d7_d2",
+ "apll1",
+ "apll2"
+};
+
+static const char * const aud_engen1_parents[] = {
+ "clk26m",
+ "apll1_d2",
+ "apll1_d4",
+ "apll1_d8"
+};
+
+static const char * const aud_engen2_parents[] = {
+ "clk26m",
+ "apll2_d2",
+ "apll2_d4",
+ "apll2_d8"
+};
+
+static const char * const axi_peri_parents[] = {
+ "clk26m",
+ "mainpll_d4_d4",
+ "mainpll_d7_d2",
+ "osc_d4"
+};
+
+static const char * const axi_u_parents[] = {
+ "clk26m",
+ "mainpll_d4_d8",
+ "mainpll_d7_d4",
+ "osc_d8"
+};
+
+static const char * const camtm_parents[] = {
+ "clk26m",
+ "osc_d2",
+ "univpll_d6_d2",
+ "univpll_d6_d4"
+};
+
+static const char * const dsi_occ_parents[] = {
+ "clk26m",
+ "univpll_d6_d2",
+ "univpll_d5_d2",
+ "univpll_d4_d2"
+};
+
+static const char * const dxcc_parents[] = {
+ "clk26m",
+ "mainpll_d4_d8",
+ "mainpll_d4_d4",
+ "mainpll_d4_d2"
+};
+
+static const char * const i2c_parents[] = {
+ "clk26m",
+ "mainpll_d4_d8",
+ "univpll_d5_d4",
+ "mainpll_d4_d4"
+};
+
+static const char * const mcupm_parents[] = {
+ "clk26m",
+ "univpll_d6_d2",
+ "mainpll_d5_d2",
+ "mainpll_d6_d2"
+};
+
+static const char * const mfg_ref_parents[] = {
+ "clk26m",
+ "mainpll_d6_d2",
+ "mainpll_d6",
+ "mainpll_d5_d2"
+};
+
+static const char * const msdc30_h_parents[] = {
+ "clk26m",
+ "msdcpll_d2",
+ "mainpll_d4_d4",
+ "mainpll_d6_d4"
+};
+
+static const char * const msdc_macro_p_parents[] = {
+ "clk26m",
+ "msdcpll",
+ "mmpll_d5_d4",
+ "univpll_d4_d2"
+};
+
+static const char * const snps_eth_62p4m_ptp_parents[] = {
+ "clk26m",
+ "ethpll_d8",
+ "apll1_d3",
+ "apll2_d3"
+};
+
+static const char * const ufs_mbist_parents[] = {
+ "clk26m",
+ "mainpll_d4_d2",
+ "univpll_d4_d2",
+ "ufspll_d2"
+};
+
+static const char * const aes_msdcfde_parents[] = {
+ "clk26m",
+ "mainpll_d4_d2",
+ "mainpll_d6",
+ "mainpll_d4_d4",
+ "msdcpll"
+};
+
+static const char * const bus_aximem_parents[] = {
+ "clk26m",
+ "mainpll_d7_d2",
+ "mainpll_d5_d2",
+ "mainpll_d4_d2",
+ "mainpll_d6"
+};
+
+static const char * const dp_parents[] = {
+ "clk26m",
+ "tvdpll1_d16",
+ "tvdpll1_d8",
+ "tvdpll1_d4",
+ "tvdpll1_d2"
+};
+
+static const char * const msdc30_parents[] = {
+ "clk26m",
+ "univpll_d6_d2",
+ "mainpll_d6_d2",
+ "mainpll_d7_d2",
+ "msdcpll_d2"
+};
+
+static const char * const ecc_parents[] = {
+ "clk26m",
+ "univpll_d6_d2",
+ "univpll_d4_d2",
+ "univpll_d6",
+ "mainpll_d4",
+ "univpll_d4"
+};
+
+static const char * const emi_n_parents[] = {
+ "clk26m",
+ "osc_d2",
+ "mainpll_d9",
+ "mainpll_d6",
+ "mainpll_d5",
+ "emipll"
+};
+
+static const char * const sr_pka_parents[] = {
+ "clk26m",
+ "mainpll_d4_d4",
+ "mainpll_d4_d2",
+ "mainpll_d7",
+ "mainpll_d6",
+ "mainpll_d5"
+};
+
+static const char * const aes_ufsfde_parents[] = {
+ "clk26m",
+ "mainpll_d4",
+ "mainpll_d4_d2",
+ "mainpll_d6",
+ "mainpll_d4_d4",
+ "univpll_d4_d2",
+ "univpll_d6"
+};
+
+static const char * const axi_parents[] = {
+ "clk26m",
+ "mainpll_d4_d4",
+ "mainpll_d7_d2",
+ "mainpll_d4_d2",
+ "mainpll_d5_d2",
+ "mainpll_d6_d2",
+ "osc_d4"
+};
+
+static const char * const disp_pwm_parents[] = {
+ "clk26m",
+ "univpll_d6_d4",
+ "osc_d2",
+ "osc_d4",
+ "osc_d16",
+ "univpll_d5_d4",
+ "mainpll_d4_d4"
+};
+
+static const char * const edp_parents[] = {
+ "clk26m",
+ "tvdpll2_d16",
+ "tvdpll2_d8",
+ "tvdpll2_d4",
+ "tvdpll2_d2"
+};
+
+static const char * const gcpu_parents[] = {
+ "clk26m",
+ "mainpll_d6",
+ "mainpll_d4_d2",
+ "univpll_d4_d2",
+ "univpll_d5_d2",
+ "univpll_d5_d4",
+ "univpll_d6"
+};
+
+static const char * const msdc50_0_parents[] = {
+ "clk26m",
+ "msdcpll",
+ "msdcpll_d2",
+ "mainpll_d6_d2",
+ "mainpll_d4_d4",
+ "mainpll_d6",
+ "univpll_d4_d4"
+};
+
+static const char * const ufs_parents[] = {
+ "clk26m",
+ "mainpll_d4_d8",
+ "mainpll_d4_d4",
+ "mainpll_d5_d2",
+ "mainpll_d6_d2",
+ "univpll_d6_d2",
+ "msdcpll_d2"
+};
+
+static const char * const dsp_parents[] = {
+ "clk26m",
+ "osc_d4",
+ "osc_d3",
+ "osc_d2",
+ "univpll_d7_d2",
+ "univpll_d6_d2",
+ "mainpll_d6",
+ "univpll_d5"
+};
+
+static const char * const mem_sub_peri_u_parents[] = {
+ "clk26m",
+ "univpll_d4_d4",
+ "mainpll_d5_d2",
+ "mainpll_d4_d2",
+ "mainpll_d6",
+ "mainpll_d5",
+ "univpll_d5",
+ "mainpll_d4"
+};
+
+static const char * const seninf_parents[] = {
+ "clk26m",
+ "osc_d2",
+ "univpll_d6_d2",
+ "mainpll_d4_d2",
+ "univpll_d4_d2",
+ "mmpll_d7",
+ "univpll_d6",
+ "univpll_d5"
+};
+
+static const char * const sflash_parents[] = {
+ "clk26m",
+ "mainpll_d7_d8",
+ "univpll_d6_d8",
+ "mainpll_d7_d4",
+ "mainpll_d6_d4",
+ "univpll_d6_d4",
+ "univpll_d7_d3",
+ "univpll_d5_d4"
+};
+
+static const char * const spi_parents[] = {
+ "clk26m",
+ "univpll_d6_d2",
+ "univpll_192m",
+ "mainpll_d6_d2",
+ "univpll_d4_d4",
+ "mainpll_d4_d4",
+ "univpll_d5_d4",
+ "univpll_d6_d4"
+};
+
+static const char * const img1_parents[] = {
+ "clk26m",
+ "univpll_d4",
+ "mmpll_d5",
+ "mmpll_d6",
+ "univpll_d6",
+ "mmpll_d7",
+ "mmpll_d4_d2",
+ "univpll_d4_d2",
+ "mainpll_d4_d2",
+ "mmpll_d6_d2",
+ "mmpll_d5_d2"
+};
+
+static const char * const ipe_parents[] = {
+ "clk26m",
+ "univpll_d4",
+ "mainpll_d4",
+ "mmpll_d6",
+ "univpll_d6",
+ "mainpll_d6",
+ "mmpll_d4_d2",
+ "univpll_d4_d2",
+ "mainpll_d4_d2",
+ "mmpll_d6_d2",
+ "mmpll_d5_d2"
+};
+
+static const char * const mem_sub_parents[] = {
+ "clk26m",
+ "univpll_d4_d4",
+ "mainpll_d6_d2",
+ "mainpll_d5_d2",
+ "mainpll_d4_d2",
+ "mainpll_d6",
+ "mmpll_d7",
+ "mainpll_d5",
+ "univpll_d5",
+ "mainpll_d4",
+ "univpll_d4"
+};
+
+static const char * const cam_parents[] = {
+ "clk26m",
+ "mainpll_d4",
+ "mmpll_d4",
+ "univpll_d4",
+ "univpll_d5",
+ "mmpll_d7",
+ "mmpll_d6",
+ "univpll_d6",
+ "univpll_d4_d2",
+ "mmpll_d9",
+ "mainpll_d4_d2",
+ "osc_d2"
+};
+
+static const char * const mmsys_parents[] = {
+ "clk26m",
+ "mainpll_d5_d2",
+ "univpll_d5_d2",
+ "mainpll_d4_d2",
+ "univpll_d4_d2",
+ "mainpll_d6",
+ "univpll_d6",
+ "mmpll_d6",
+ "tvdpll1",
+ "tvdpll2",
+ "univpll_d4",
+ "mmpll_d4"
+};
+
+static const char * const mminfra_parents[] = {
+ "clk26m",
+ "osc_d2",
+ "mainpll_d5_d2",
+ "mmpll_d6_d2",
+ "mainpll_d4_d2",
+ "mmpll_d4_d2",
+ "mainpll_d6",
+ "mmpll_d7",
+ "univpll_d6",
+ "mainpll_d5",
+ "mmpll_d6",
+ "univpll_d5",
+ "mainpll_d4",
+ "univpll_d4",
+ "mmpll_d4",
+ "emipll"
+};
+
+static const char * const vdec_parents[] = {
+ "clk26m",
+ "univpll_192m_d2",
+ "univpll_d5_d4",
+ "mainpll_d5",
+ "mainpll_d5_d2",
+ "mmpll_d6_d2",
+ "univpll_d5_d2",
+ "mainpll_d4_d2",
+ "univpll_d4_d2",
+ "univpll_d7",
+ "mmpll_d7",
+ "mmpll_d6",
+ "univpll_d6",
+ "mainpll_d4",
+ "univpll_d4",
+ "mmpll_d5_d2"
+};
+
+static const char * const venc_parents[] = {
+ "clk26m",
+ "mmpll_d4_d2",
+ "mainpll_d6",
+ "univpll_d4_d2",
+ "mainpll_d4_d2",
+ "univpll_d6",
+ "mmpll_d6",
+ "mainpll_d5_d2",
+ "mainpll_d6_d2",
+ "mmpll_d9",
+ "mmpll_d4",
+ "mainpll_d4",
+ "univpll_d4",
+ "univpll_d5",
+ "univpll_d5_d2",
+ "mainpll_d5"
+};
+
+static const struct mtk_mux top_muxes[] = {
+ /* CLK_CFG_0 */
+ MUX_CLR_SET_UPD(CLK_TOP_AXI_SEL, "axi_sel",
+ axi_parents, 0x010, 0x014, 0x018, 0, 3, 0x04, 0),
+ MUX_CLR_SET_UPD(CLK_TOP_AXI_PERI_SEL, "axi_peri_sel",
+ axi_peri_parents, 0x010, 0x014, 0x018,
+ 8, 2, 0x04, 1),
+ MUX_CLR_SET_UPD(CLK_TOP_AXI_U_SEL, "axi_u_sel",
+ axi_u_parents, 0x010, 0x014, 0x018,
+ 16, 2, 0x04, 2),
+ MUX_CLR_SET_UPD(CLK_TOP_BUS_AXIMEM_SEL, "bus_aximem_sel",
+ bus_aximem_parents, 0x010, 0x014, 0x018,
+ 24, 3, 0x04, 3),
+ /* CLK_CFG_1 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_DISP0_SEL, "disp0_sel",
+ mmsys_parents, 0x020, 0x024, 0x028,
+ 0, 4, 7, 0x04, 4),
+ MUX_CLR_SET_UPD(CLK_TOP_MMINFRA_SEL, "mminfra_sel",
+ mminfra_parents, 0x020, 0x024, 0x028,
+ 8, 4, 0x04, 5),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_UART_SEL, "uart_sel",
+ uart_parents, 0x020, 0x024, 0x028,
+ 16, 1, 23, 0x04, 6),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPI0_SEL, "spi0_sel",
+ spi_parents, 0x020, 0x024, 0x028,
+ 24, 3, 31, 0x04, 7),
+ /* CLK_CFG_2 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPI1_SEL, "spi1_sel",
+ spi_parents, 0x030, 0x034, 0x038,
+ 0, 3, 7, 0x04, 8),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPI2_SEL, "spi2_sel",
+ spi_parents, 0x030, 0x034, 0x038,
+ 8, 3, 15, 0x04, 9),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPI3_SEL, "spi3_sel",
+ spi_parents, 0x030, 0x034, 0x038,
+ 16, 3, 23, 0x04, 10),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPI4_SEL, "spi4_sel",
+ spi_parents, 0x030, 0x034, 0x038,
+ 24, 3, 31, 0x04, 11),
+ /* CLK_CFG_3 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPI5_SEL, "spi5_sel",
+ spi_parents, 0x040, 0x044, 0x048,
+ 0, 3, 7, 0x04, 12),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_MSDC_MACRO_0P_SEL, "msdc_macro_0p_sel",
+ msdc_macro_p_parents, 0x040, 0x044, 0x048,
+ 8, 2, 15, 0x04, 13),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_MSDC50_0_HCLK_SEL, "msdc5hclk_sel",
+ msdc5hclk_parents, 0x040, 0x044, 0x048,
+ 16, 2, 23, 0x04, 14),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_MSDC50_0_SEL, "msdc50_0_sel",
+ msdc50_0_parents, 0x040, 0x044, 0x048,
+ 24, 3, 31, 0x04, 15),
+ /* CLK_CFG_4 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AES_MSDCFDE_SEL, "aes_msdcfde_sel",
+ aes_msdcfde_parents, 0x050, 0x054, 0x058,
+ 0, 3, 7, 0x04, 16),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_MSDC_MACRO_1P_SEL, "msdc_macro_1p_sel",
+ msdc_macro_p_parents, 0x050, 0x054, 0x058,
+ 8, 2, 15, 0x04, 17),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_MSDC30_1_SEL, "msdc30_1_sel",
+ msdc30_parents, 0x050, 0x054, 0x058,
+ 16, 3, 23, 0x04, 18),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_MSDC30_1_HCLK_SEL, "msdc30_1_h_sel",
+ msdc30_h_parents, 0x050, 0x054, 0x058,
+ 24, 2, 31, 0x04, 19),
+ /* CLK_CFG_5 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_MSDC_MACRO_2P_SEL, "msdc_macro_2p_sel",
+ msdc_macro_p_parents, 0x060, 0x064, 0x068,
+ 0, 2, 7, 0x04, 20),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_MSDC30_2_SEL, "msdc30_2_sel",
+ msdc30_parents, 0x060, 0x064, 0x068,
+ 8, 3, 15, 0x04, 21),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_MSDC30_2_HCLK_SEL, "msdc30_2_h_sel",
+ msdc30_h_parents, 0x060, 0x064, 0x068,
+ 16, 2, 23, 0x04, 22),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_INTBUS_SEL, "aud_intbus_sel",
+ aud_intbus_parents, 0x060, 0x064, 0x068,
+ 24, 2, 31, 0x04, 23),
+ /* CLK_CFG_6 */
+ MUX_CLR_SET_UPD(CLK_TOP_ATB_SEL, "atb_sel",
+ atb_parents, 0x070, 0x074, 0x078, 0, 2, 0x04, 24),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_DISP_PWM_SEL, "disp_pwm_sel",
+ disp_pwm_parents, 0x070, 0x074, 0x078,
+ 8, 3, 15, 0x04, 25),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_TOP_P0_SEL, "usb_p0_sel",
+ usb_parents, 0x070, 0x074, 0x078,
+ 16, 2, 23, 0x04, 26),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_XHCI_P0_SEL, "ssusb_xhci_p0_sel",
+ usb_parents, 0x070, 0x074, 0x078,
+ 24, 2, 31, 0x04, 27),
+ /* CLK_CFG_7 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_TOP_P1_SEL, "usb_p1_sel",
+ usb_parents, 0x080, 0x084, 0x088,
+ 0, 2, 7, 0x04, 28),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_XHCI_P1_SEL, "ssusb_xhci_p1_sel",
+ usb_parents, 0x080, 0x084, 0x088,
+ 8, 2, 15, 0x04, 29),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_TOP_P2_SEL, "usb_p2_sel",
+ usb_parents, 0x080, 0x084, 0x088,
+ 16, 2, 23, 0x04, 30),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_XHCI_P2_SEL, "ssusb_xhci_p2_sel",
+ usb_parents, 0x080, 0x084, 0x088,
+ 24, 2, 31, 0x08, 0),
+ /* CLK_CFG_8 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_TOP_P3_SEL, "usb_p3_sel",
+ usb_parents, 0x090, 0x094, 0x098,
+ 0, 2, 7, 0x08, 1),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_XHCI_P3_SEL, "ssusb_xhci_p3_sel",
+ usb_parents, 0x090, 0x094, 0x098,
+ 8, 2, 15, 0x08, 2),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_TOP_P4_SEL, "usb_p4_sel",
+ usb_parents, 0x090, 0x094, 0x098,
+ 16, 2, 23, 0x08, 3),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_XHCI_P4_SEL, "ssusb_xhci_p4_sel",
+ usb_parents, 0x090, 0x094, 0x098,
+ 24, 2, 31, 0x08, 4),
+ /* CLK_CFG_9 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_I2C_SEL, "i2c_sel",
+ i2c_parents, 0x0a0, 0x0a4, 0x0a8,
+ 0, 2, 7, 0x08, 5),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SENINF_SEL, "seninf_sel",
+ seninf_parents, 0x0a0, 0x0a4, 0x0a8,
+ 8, 3, 15, 0x08, 6),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SENINF1_SEL, "seninf1_sel",
+ seninf_parents, 0x0a0, 0x0a4, 0x0a8,
+ 16, 3, 23, 0x08, 7),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_ENGEN1_SEL, "aud_engen1_sel",
+ aud_engen1_parents, 0x0a0, 0x0a4, 0x0a8,
+ 24, 2, 31, 0x08, 8),
+ /* CLK_CFG_10 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_ENGEN2_SEL, "aud_engen2_sel",
+ aud_engen2_parents, 0x0b0, 0x0b4, 0x0b8,
+ 0, 2, 7, 0x08, 9),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AES_UFSFDE_SEL, "aes_ufsfde_sel",
+ aes_ufsfde_parents, 0x0b0, 0x0b4, 0x0b8,
+ 8, 3, 15, 0x08, 10),
+ MUX_CLR_SET_UPD(CLK_TOP_U_SEL, "ufs_sel",
+ ufs_parents, 0x0b0, 0x0b4, 0x0b8,
+ 16, 3, 0x08, 11),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_U_MBIST_SEL, "ufs_mbist_sel",
+ ufs_mbist_parents, 0x0b0, 0x0b4, 0x0b8,
+ 24, 2, 31, 0x08, 12),
+ /* CLK_CFG_11 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_1_SEL, "aud_1_sel",
+ aud_1_parents, 0x0c0, 0x0c4, 0x0c8,
+ 0, 1, 7, 0x08, 13),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_2_SEL, "aud_2_sel",
+ aud_2_parents, 0x0c0, 0x0c4, 0x0c8,
+ 8, 1, 15, 0x08, 14),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_VENC_SEL, "venc_sel",
+ venc_parents, 0x0c0, 0x0c4, 0x0c8,
+ 16, 4, 23, 0x08, 15),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_VDEC_SEL, "vdec_sel",
+ vdec_parents, 0x0c0, 0x0c4, 0x0c8,
+ 24, 4, 31, 0x08, 16),
+ /* CLK_CFG_12 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PWM_SEL, "pwm_sel",
+ pwm_parents, 0x0d0, 0x0d4, 0x0d8,
+ 0, 1, 7, 0x08, 17),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AUDIO_H_SEL, "audio_h_sel",
+ audio_h_parents, 0x0d0, 0x0d4, 0x0d8,
+ 8, 2, 15, 0x08, 18),
+ MUX_CLR_SET_UPD(CLK_TOP_MCUPM_SEL, "mcupm_sel",
+ mcupm_parents, 0x0d0, 0x0d4, 0x0d8,
+ 16, 2, 0x08, 19),
+ MUX_CLR_SET_UPD(CLK_TOP_MEM_SUB_SEL, "mem_sub_sel",
+ mem_sub_parents, 0x0d0, 0x0d4, 0x0d8,
+ 24, 4, 0x08, 20),
+ /* CLK_CFG_13 */
+ MUX_CLR_SET_UPD(CLK_TOP_MEM_SUB_PERI_SEL, "mem_sub_peri_sel",
+ mem_sub_peri_u_parents, 0x0e0, 0x0e4, 0x0e8,
+ 0, 3, 0x08, 21),
+ MUX_CLR_SET_UPD(CLK_TOP_MEM_SUB_U_SEL, "mem_sub_u_sel",
+ mem_sub_peri_u_parents, 0x0e0, 0x0e4, 0x0e8,
+ 8, 3, 0x08, 22),
+ MUX_CLR_SET_UPD(CLK_TOP_EMI_N_SEL, "emi_n_sel",
+ emi_n_parents, 0x0e0, 0x0e4, 0x0e8,
+ 16, 3, 0x08, 23),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_DSI_OCC_SEL, "dsi_occ_sel",
+ dsi_occ_parents, 0x0e0, 0x0e4, 0x0e8,
+ 24, 2, 31, 0x08, 24),
+ /* CLK_CFG_14 */
+ MUX_CLR_SET_UPD(CLK_TOP_AP2CONN_HOST_SEL, "ap2conn_host_sel",
+ ap2conn_host_parents, 0x0f0, 0x0f4, 0x0f8,
+ 0, 1, 0x08, 25),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_IMG1_SEL, "img1_sel",
+ img1_parents, 0x0f0, 0x0f4, 0x0f8,
+ 8, 4, 15, 0x08, 26),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_IPE_SEL, "ipe_sel",
+ ipe_parents, 0x0f0, 0x0f4, 0x0f8,
+ 16, 4, 23, 0x08, 27),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_CAM_SEL, "cam_sel",
+ cam_parents, 0x0f0, 0x0f4, 0x0f8,
+ 24, 4, 31, 0x08, 28),
+ /* CLK_CFG_15 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_CAMTM_SEL, "camtm_sel",
+ camtm_parents, 0x100, 0x104, 0x108,
+ 0, 2, 7, 0x08, 29),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_DSP_SEL, "dsp_sel",
+ dsp_parents, 0x100, 0x104, 0x108,
+ 8, 3, 15, 0x08, 30),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SR_PKA_SEL, "sr_pka_sel",
+ sr_pka_parents, 0x100, 0x104, 0x108,
+ 16, 3, 23, 0x0c, 0),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_DXCC_SEL, "dxcc_sel",
+ dxcc_parents, 0x100, 0x104, 0x108,
+ 24, 2, 31, 0x0c, 1),
+ /* CLK_CFG_16 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_MFG_REF_SEL, "mfg_ref_sel",
+ mfg_ref_parents, 0x110, 0x114, 0x118,
+ 0, 2, 7, 0x0c, 2),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_MDP0_SEL, "mdp0_sel",
+ mmsys_parents, 0x110, 0x114, 0x118,
+ 8, 4, 15, 0x0c, 3),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_DP_SEL, "dp_sel",
+ dp_parents, 0x110, 0x114, 0x118,
+ 16, 3, 23, 0x0c, 4),
+ MUX_CLR_SET_UPD(CLK_TOP_EDP_SEL, "edp_sel",
+ edp_parents, 0x110, 0x114, 0x118,
+ 24, 3, 0x0c, 5),
+ /* CLK_CFG_17 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_EDP_FAVT_SEL, "edp_favt_sel",
+ edp_parents, 0x180, 0x184, 0x188,
+ 0, 3, 7, 0x0c, 6),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_ETH_250M_SEL, "snps_eth_250m_sel",
+ snps_eth_250m_parents, 0x180, 0x184, 0x188,
+ 8, 1, 15, 0x0c, 7),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_ETH_62P4M_PTP_SEL,
+ "snps_eth_62p4m_ptp_sel",
+ snps_eth_62p4m_ptp_parents,
+ 0x180, 0x184, 0x188, 16, 2, 23, 0x0c, 8),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_ETH_50M_RMII_SEL,
+ "snps_eth_50m_rmii_sel",
+ snps_eth_50m_rmii_parents,
+ 0x180, 0x184, 0x188, 24, 1, 31, 0x0c, 9),
+ /* CLK_CFG_18 */
+ MUX_CLR_SET_UPD(CLK_TOP_SFLASH_SEL, "sflash_sel",
+ sflash_parents, 0x190, 0x194, 0x198,
+ 0, 3, 0x0c, 10),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_GCPU_SEL, "gcpu_sel",
+ gcpu_parents, 0x190, 0x194, 0x198,
+ 8, 3, 15, 0x0c, 11),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_MAC_TL_SEL, "pcie_mac_tl_sel",
+ pcie_mac_tl_parents, 0x190, 0x194, 0x198,
+ 16, 2, 23, 0x0c, 12),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_VDSTX_DG_CTS_SEL, "vdstx_dg_cts_sel",
+ vdstx_dg_cts_parents, 0x190, 0x194, 0x198,
+ 24, 2, 31, 0x0c, 13),
+ /* CLK_CFG_19 */
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PLL_DPIX_SEL, "pll_dpix_sel",
+ pll_dpix_parents, 0x240, 0x244, 0x248,
+ 0, 2, 7, 0x0c, 14),
+ MUX_GATE_CLR_SET_UPD(CLK_TOP_ECC_SEL, "ecc_sel",
+ ecc_parents, 0x240, 0x244, 0x248,
+ 8, 3, 15, 0x0c, 15),
+ /* CLK_MISC_CFG_3 */
+ GATE_CLR_SET_UPD_FLAGS(CLK_TOP_MFG_SEL_MFGPLL, "mfg_sel_mfgpll",
+ mfg_sel_mfgpll_parents,
+ 0x510, 0x514, 0x0518, 16, 1, 0, -1, -1,
+ CLK_SET_RATE_PARENT,
+ mtk_mux_clr_set_upd_ops)
+};
+
+static const struct mtk_composite top_composites[] = {
+ /* CLK_AUDDIV_0 */
+ MUX(CLK_TOP_APLL_I2SIN0_MCK_SEL, "apll_i2sin0_m_sel",
+ apll_m_parents, 0x0320, 16, 1),
+ MUX(CLK_TOP_APLL_I2SIN1_MCK_SEL, "apll_i2sin1_m_sel",
+ apll_m_parents, 0x0320, 17, 1),
+ MUX(CLK_TOP_APLL_I2SIN2_MCK_SEL, "apll_i2sin2_m_sel",
+ apll_m_parents, 0x0320, 18, 1),
+ MUX(CLK_TOP_APLL_I2SIN3_MCK_SEL, "apll_i2sin3_m_sel",
+ apll_m_parents, 0x0320, 19, 1),
+ MUX(CLK_TOP_APLL_I2SIN4_MCK_SEL, "apll_i2sin4_m_sel",
+ apll_m_parents, 0x0320, 20, 1),
+ MUX(CLK_TOP_APLL_I2SIN6_MCK_SEL, "apll_i2sin6_m_sel",
+ apll_m_parents, 0x0320, 21, 1),
+ MUX(CLK_TOP_APLL_I2SOUT0_MCK_SEL, "apll_i2sout0_m_sel",
+ apll_m_parents, 0x0320, 22, 1),
+ MUX(CLK_TOP_APLL_I2SOUT1_MCK_SEL, "apll_i2sout1_m_sel",
+ apll_m_parents, 0x0320, 23, 1),
+ MUX(CLK_TOP_APLL_I2SOUT2_MCK_SEL, "apll_i2sout2_m_sel",
+ apll_m_parents, 0x0320, 24, 1),
+ MUX(CLK_TOP_APLL_I2SOUT3_MCK_SEL, "apll_i2sout3_m_sel",
+ apll_m_parents, 0x0320, 25, 1),
+ MUX(CLK_TOP_APLL_I2SOUT4_MCK_SEL, "apll_i2sout4_m_sel",
+ apll_m_parents, 0x0320, 26, 1),
+ MUX(CLK_TOP_APLL_I2SOUT6_MCK_SEL, "apll_i2sout6_m_sel",
+ apll_m_parents, 0x0320, 27, 1),
+ MUX(CLK_TOP_APLL_FMI2S_MCK_SEL, "apll_fmi2s_m_sel",
+ apll_m_parents, 0x0320, 28, 1),
+ MUX(CLK_TOP_APLL_TDMOUT_MCK_SEL, "apll_tdmout_m_sel",
+ apll_m_parents, 0x0320, 29, 1),
+ /* CLK_AUDDIV_2 */
+ DIV_GATE(CLK_TOP_APLL12_CK_DIV_I2SIN0, "apll12_div_i2sin0",
+ "apll_i2sin0_m_sel", 0x0320, 0, 0x0328, 8, 0),
+ DIV_GATE(CLK_TOP_APLL12_CK_DIV_I2SIN1, "apll12_div_i2sin1",
+ "apll_i2sin1_m_sel", 0x0320, 1, 0x0328, 8, 8),
+ /* CLK_AUDDIV_3 */
+ DIV_GATE(CLK_TOP_APLL12_CK_DIV_I2SOUT0, "apll12_div_i2sout0",
+ "apll_i2sout0_m_sel", 0x0320, 6, 0x0334, 8, 16),
+ DIV_GATE(CLK_TOP_APLL12_CK_DIV_I2SOUT1, "apll12_div_i2sout1",
+ "apll_i2sout1_m_sel", 0x0320, 7, 0x0334, 8, 24),
+ /* CLK_AUDDIV_5 */
+ DIV_GATE(CLK_TOP_APLL12_CK_DIV_FMI2S, "apll12_div_fmi2s",
+ "apll_fmi2s_m_sel", 0x0320, 12, 0x033c, 8, 0),
+ DIV_GATE(CLK_TOP_APLL12_CK_DIV_TDMOUT_M, "apll12_div_tdmout_m",
+ "apll_tdmout_m_sel", 0x0320, 13, 0x033c, 8, 8),
+ DIV_GATE(CLK_TOP_APLL12_CK_DIV_TDMOUT_B, "apll12_div_tdmout_b",
+ "apll12_div_tdmout_m", 0x0320, 14, 0x033c, 8, 16),
+};
+
+static const struct mtk_gate_regs top_cg_regs = {
+ .set_ofs = 0x514,
+ .clr_ofs = 0x518,
+ .sta_ofs = 0x510,
+};
+
+#define GATE_TOP_FLAGS(_id, _name, _parent, _shift, _flag) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &top_cg_regs, \
+ .shift = _shift, \
+ .flags = _flag, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+#define GATE_TOP(_id, _name, _parent, _shift) \
+ GATE_TOP_FLAGS(_id, _name, _parent, _shift, 0)
+
+static const struct mtk_gate top_clks[] = {
+ GATE_TOP_FLAGS(CLK_TOP_FMCNT_P0_EN, "fmcnt_p0_en", "univpll_192m_d4", 0, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_FMCNT_P1_EN, "fmcnt_p1_en", "univpll_192m_d4", 1, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_FMCNT_P2_EN, "fmcnt_p2_en", "univpll_192m_d4", 2, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_FMCNT_P3_EN, "fmcnt_p3_en", "univpll_192m_d4", 3, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_FMCNT_P4_EN, "fmcnt_p4_en", "univpll_192m_d4", 4, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_USB_F26M_CK_EN, "ssusb_f26m", "clk26m", 5, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_SSPXTP_F26M_CK_EN, "sspxtp_f26m", "clk26m", 6, CLK_IS_CRITICAL),
+ GATE_TOP(CLK_TOP_USB2_PHY_RF_P0_EN, "usb2_phy_rf_p0_en", "ssusb_f26m", 7),
+ GATE_TOP(CLK_TOP_USB2_PHY_RF_P1_EN, "usb2_phy_rf_p1_en", "ssusb_f26m", 10),
+ GATE_TOP(CLK_TOP_USB2_PHY_RF_P2_EN, "usb2_phy_rf_p2_en", "ssusb_f26m", 11),
+ GATE_TOP(CLK_TOP_USB2_PHY_RF_P3_EN, "usb2_phy_rf_p3_en", "ssusb_f26m", 12),
+ GATE_TOP(CLK_TOP_USB2_PHY_RF_P4_EN, "usb2_phy_rf_p4_en", "ssusb_f26m", 13),
+ GATE_TOP_FLAGS(CLK_TOP_USB2_26M_CK_P0_EN, "usb2_26m_p0_en", "ssusb_f26m", 14, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_USB2_26M_CK_P1_EN, "usb2_26m_p1_en", "ssusb_f26m", 15, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_USB2_26M_CK_P2_EN, "usb2_26m_p2_en", "ssusb_f26m", 18, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_USB2_26M_CK_P3_EN, "usb2_26m_p3_en", "ssusb_f26m", 19, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_USB2_26M_CK_P4_EN, "usb2_26m_p4_en", "ssusb_f26m", 20, CLK_IS_CRITICAL),
+ GATE_TOP(CLK_TOP_F26M_CK_EN, "pcie_f26m", "sspxtp_f26m", 21),
+ GATE_TOP_FLAGS(CLK_TOP_AP2CON_EN, "ap2con", "clk26m", 24, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_EINT_N_EN, "eint_n", "clk26m", 25, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_TOPCKGEN_FMIPI_CSI_UP26M_CK_EN,
+ "fmipi_csi_up26m", "osc_d10", 26, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_EINT_E_EN, "eint_e", "clk26m", 28, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_EINT_W_EN, "eint_w", "clk26m", 30, CLK_IS_CRITICAL),
+ GATE_TOP_FLAGS(CLK_TOP_EINT_S_EN, "eint_s", "clk26m", 31, CLK_IS_CRITICAL),
+};
+
+/* Register mux notifier for MFG mux */
+static int clk_mt8189_reg_mfg_mux_notifier(struct device *dev,
+ struct clk *clk)
+{
+ struct mtk_mux_nb *mfg_mux_nb;
+
+ mfg_mux_nb = devm_kzalloc(dev, sizeof(*mfg_mux_nb), GFP_KERNEL);
+ if (!mfg_mux_nb)
+ return -ENOMEM;
+
+ mfg_mux_nb->ops = &mtk_mux_clr_set_upd_ops;
+ mfg_mux_nb->bypass_index = 0; /* Bypass to CLK_TOP_MFG_REF_SEL */
+
+ return devm_mtk_clk_mux_notifier_register(dev, clk, mfg_mux_nb);
+}
+
+static const struct mtk_clk_desc topck_desc = {
+ .factor_clks = top_divs,
+ .num_factor_clks = ARRAY_SIZE(top_divs),
+ .mux_clks = top_muxes,
+ .num_mux_clks = ARRAY_SIZE(top_muxes),
+ .composite_clks = top_composites,
+ .num_composite_clks = ARRAY_SIZE(top_composites),
+ .clks = top_clks,
+ .num_clks = ARRAY_SIZE(top_clks),
+ .clk_notifier_func = clk_mt8189_reg_mfg_mux_notifier,
+ .mfg_clk_idx = CLK_TOP_MFG_SEL_MFGPLL,
+ .clk_lock = &mt8189_clk_lock,
+};
+
+static const struct of_device_id of_match_clk_mt8189_topck[] = {
+ { .compatible = "mediatek,mt8189-topckgen", .data = &topck_desc },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_match_clk_mt8189_topck);
+
+static struct platform_driver clk_mt8189_topck_drv = {
+ .probe = mtk_clk_simple_probe,
+ .remove = mtk_clk_simple_remove,
+ .driver = {
+ .name = "clk-mt8189-topck",
+ .of_match_table = of_match_clk_mt8189_topck,
+ },
+};
+module_platform_driver(clk_mt8189_topck_drv);
+
+MODULE_DESCRIPTION("MediaTek MT8189 topckgen clocks driver");
+MODULE_LICENSE("GPL");
--
2.55.0
^ permalink raw reply related
* [PATCH v3 18/18] clk: mediatek: Add MT8189 ufs clock support
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Irving-CH Lin, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Add support for the MT8189 ufs clock controller,
which provides clock gate control for Universal Flash Storage.
Co-developed-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Co-developed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
drivers/clk/mediatek/Kconfig | 12 +++
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt8189-ufs.c | 133 ++++++++++++++++++++++++++++++++++
3 files changed, 146 insertions(+)
diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 919a916f1f4f..34a270a377cc 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -882,6 +882,18 @@ config COMMON_CLK_MT8189_SCP
management for SCP-related features, ensuring proper clock
distribution and gating for power efficiency and functionality.
+config COMMON_CLK_MT8189_UFS
+ tristate "Clock driver for MediaTek MT8189 ufs"
+ depends on COMMON_CLK_MT8189
+ default COMMON_CLK_MT8189
+ help
+ Enable this to support the clock management for the Universal Flash
+ Storage (UFS) interface on MediaTek MT8189 SoCs. This includes
+ clock sources, dividers, and gates that are specific to the UFS
+ feature of the MT8189 platform. It is recommended to enable this
+ option if the system includes a UFS device that relies on the MT8189
+ SoC for clock management.
+
config COMMON_CLK_MT8192
tristate "Clock driver for MediaTek MT8192"
depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index a3a93a16b369..1aa9f4265225 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -130,6 +130,7 @@ obj-$(CONFIG_COMMON_CLK_MT8189_DBGAO) += clk-mt8189-dbgao.o
obj-$(CONFIG_COMMON_CLK_MT8189_DVFSRC) += clk-mt8189-dvfsrc.o
obj-$(CONFIG_COMMON_CLK_MT8189_IIC) += clk-mt8189-iic.o
obj-$(CONFIG_COMMON_CLK_MT8189_SCP) += clk-mt8189-scp.o
+obj-$(CONFIG_COMMON_CLK_MT8189_UFS) += clk-mt8189-ufs.o
obj-$(CONFIG_COMMON_CLK_MT8192) += clk-mt8192-apmixedsys.o clk-mt8192.o
obj-$(CONFIG_COMMON_CLK_MT8192_AUDSYS) += clk-mt8192-aud.o
obj-$(CONFIG_COMMON_CLK_MT8192_CAMSYS) += clk-mt8192-cam.o
diff --git a/drivers/clk/mediatek/clk-mt8189-ufs.c b/drivers/clk/mediatek/clk-mt8189-ufs.c
new file mode 100644
index 000000000000..85afab04420f
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8189-ufs.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025-2026 MediaTek Inc.
+ * Qiqi Wang <qiqi.wang@mediatek.com>
+ * Irving-CH Lin <irving-ch.lin@mediatek.com>
+ * Copyright (C) 2026 Collabora Ltd.
+ * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ * Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mediatek,mt8189-clk.h>
+#include <dt-bindings/reset/mediatek,mt8189-resets.h>
+
+#define MT8189_UFSCFG_AO_RST0_SET_OFFSET 0x48
+#define MT8189_UFSCFG_PDN_RST0_SET_OFFSET 0x48
+
+static const struct mtk_gate_regs ufscfg_ao_reg_cg_regs = {
+ .set_ofs = 0x8,
+ .clr_ofs = 0xc,
+ .sta_ofs = 0x4,
+};
+
+#define GATE_UFSCFG_AO_REG(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &ufscfg_ao_reg_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
+
+static const struct mtk_gate ufscfg_ao_reg_clks[] = {
+ GATE_UFSCFG_AO_REG(CLK_UFSCFG_AO_REG_UNIPRO_TX_SYM,
+ "ufscfg_ao_unipro_tx_sym", "clk26m", 1),
+ GATE_UFSCFG_AO_REG(CLK_UFSCFG_AO_REG_UNIPRO_RX_SYM0,
+ "ufscfg_ao_unipro_rx_sym0", "clk26m", 2),
+ GATE_UFSCFG_AO_REG(CLK_UFSCFG_AO_REG_UNIPRO_RX_SYM1,
+ "ufscfg_ao_unipro_rx_sym1", "clk26m", 3),
+ GATE_UFSCFG_AO_REG(CLK_UFSCFG_AO_REG_UNIPRO_SYS,
+ "ufscfg_ao_unipro_sys", "ufs_sel", 4),
+ GATE_UFSCFG_AO_REG(CLK_UFSCFG_AO_REG_U_SAP_CFG,
+ "ufscfg_ao_u_sap_cfg", "clk26m", 5),
+ GATE_UFSCFG_AO_REG(CLK_UFSCFG_AO_REG_U_PHY_TOP_AHB_S_BUS,
+ "ufscfg_ao_u_phy_ahb_s_bus", "axi_u_sel", 6),
+};
+
+static u16 ufscfg_ao_rst_ofs[] = {
+ MT8189_UFSCFG_AO_RST0_SET_OFFSET,
+};
+
+static u16 ufscfg_ao_rst_idx_map[] = {
+ [MT8189_UFSAO_RST_UFS_MPHY] = 8,
+};
+
+static const struct mtk_clk_rst_desc ufscfg_ao_rst_desc = {
+ .version = MTK_RST_SET_CLR,
+ .rst_bank_ofs = ufscfg_ao_rst_ofs,
+ .rst_bank_nr = ARRAY_SIZE(ufscfg_ao_rst_ofs),
+ .rst_idx_map = ufscfg_ao_rst_idx_map,
+ .rst_idx_map_nr = ARRAY_SIZE(ufscfg_ao_rst_idx_map),
+};
+
+static const struct mtk_clk_desc ufscfg_ao_reg_mcd = {
+ .clks = ufscfg_ao_reg_clks,
+ .num_clks = ARRAY_SIZE(ufscfg_ao_reg_clks),
+ .rst_desc = &ufscfg_ao_rst_desc,
+};
+
+static const struct mtk_gate_regs ufscfg_pdn_reg_cg_regs = {
+ .set_ofs = 0x8,
+ .clr_ofs = 0xc,
+ .sta_ofs = 0x4,
+};
+
+#define GATE_UFSCFG_PDN_REG(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &ufscfg_pdn_reg_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
+
+static const struct mtk_gate ufscfg_pdn_reg_clks[] = {
+ GATE_UFSCFG_PDN_REG(CLK_UFSCFG_REG_UFSHCI_UFS,
+ "ufscfg_ufshci_ufs", "ufs_sel", 0),
+ GATE_UFSCFG_PDN_REG(CLK_UFSCFG_REG_UFSHCI_AES,
+ "ufscfg_ufshci_aes", "aes_ufsfde_sel", 1),
+ GATE_UFSCFG_PDN_REG(CLK_UFSCFG_REG_UFSHCI_U_AHB,
+ "ufscfg_ufshci_u_ahb", "axi_u_sel", 3),
+ GATE_UFSCFG_PDN_REG(CLK_UFSCFG_REG_UFSHCI_U_AXI,
+ "ufscfg_ufshci_u_axi", "mem_sub_u_sel", 5),
+};
+
+static u16 ufscfg_pdn_rst_ofs[] = {
+ MT8189_UFSCFG_PDN_RST0_SET_OFFSET,
+};
+
+static u16 ufscfg_pdn_rst_idx_map[] = {
+ [MT8189_UFSPDN_RST_UFS_UNIPRO] = 0,
+ [MT8189_UFSPDN_RST_UFS_CRYPTO] = 1,
+ [MT8189_UFSPDN_RST_UFS_HCI] = 2,
+};
+
+static const struct mtk_clk_rst_desc ufscfg_pdn_rst_desc = {
+ .version = MTK_RST_SET_CLR,
+ .rst_bank_ofs = ufscfg_pdn_rst_ofs,
+ .rst_bank_nr = ARRAY_SIZE(ufscfg_pdn_rst_ofs),
+ .rst_idx_map = ufscfg_pdn_rst_idx_map,
+ .rst_idx_map_nr = ARRAY_SIZE(ufscfg_pdn_rst_idx_map),
+};
+
+static const struct mtk_clk_desc ufscfg_pdn_reg_mcd = {
+ .clks = ufscfg_pdn_reg_clks,
+ .num_clks = ARRAY_SIZE(ufscfg_pdn_reg_clks),
+ .rst_desc = &ufscfg_pdn_rst_desc,
+};
+
+static const struct of_device_id of_match_clk_mt8189_ufs[] = {
+ { .compatible = "mediatek,mt8189-ufscfg-ao", .data = &ufscfg_ao_reg_mcd },
+ { .compatible = "mediatek,mt8189-ufscfg-pdn", .data = &ufscfg_pdn_reg_mcd },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_match_clk_mt8189_ufs);
+
+static struct platform_driver clk_mt8189_ufs_drv = {
+ .probe = mtk_clk_simple_probe,
+ .remove = mtk_clk_simple_remove,
+ .driver = {
+ .name = "clk-mt8189-ufs",
+ .of_match_table = of_match_clk_mt8189_ufs,
+ },
+};
+module_platform_driver(clk_mt8189_ufs_drv);
+
+MODULE_DESCRIPTION("MediaTek MT8189 ufs clocks driver");
+MODULE_LICENSE("GPL");
--
2.55.0
^ permalink raw reply related
* [PATCH v3 14/18] clk: mediatek: Add MT8189 dbgao clock support
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Irving-CH Lin, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Add support for the MT8189 dbgao clock controller,
which provides clock gate control for debug-system.
Co-developed-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Co-developed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
drivers/clk/mediatek/Kconfig | 10 ++++
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt8189-dbgao.c | 98 +++++++++++++++++++++++++++++++++
3 files changed, 109 insertions(+)
diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 8eba45f05968..635b0109ec07 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -839,6 +839,16 @@ config COMMON_CLK_MT8189_BUS
MT8189 chipset, ensuring that all bus-related components receive the
correct clock signals for optimal performance.
+config COMMON_CLK_MT8189_DBGAO
+ tristate "Clock driver for MediaTek MT8189 debug ao"
+ depends on COMMON_CLK_MT8189
+ default COMMON_CLK_MT8189
+ help
+ Enable this to support the clock management for the debug function
+ on MediaTek MT8189 SoCs. This includes enabling and disabling
+ vcore debug system clocks. If you want to control its clocks, say Y or M
+ to include this driver in your kernel build.
+
config COMMON_CLK_MT8192
tristate "Clock driver for MediaTek MT8192"
depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index aabfb42cb1b2..6ab6df7ebf2a 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -126,6 +126,7 @@ obj-$(CONFIG_COMMON_CLK_MT8188_WPESYS) += clk-mt8188-wpe.o
obj-$(CONFIG_COMMON_CLK_MT8189) += clk-mt8189-apmixedsys.o clk-mt8189-topckgen.o \
clk-mt8189-vlpckgen.o clk-mt8189-vlpcfg.o
obj-$(CONFIG_COMMON_CLK_MT8189_BUS) += clk-mt8189-bus.o
+obj-$(CONFIG_COMMON_CLK_MT8189_DBGAO) += clk-mt8189-dbgao.o
obj-$(CONFIG_COMMON_CLK_MT8192) += clk-mt8192-apmixedsys.o clk-mt8192.o
obj-$(CONFIG_COMMON_CLK_MT8192_AUDSYS) += clk-mt8192-aud.o
obj-$(CONFIG_COMMON_CLK_MT8192_CAMSYS) += clk-mt8192-cam.o
diff --git a/drivers/clk/mediatek/clk-mt8189-dbgao.c b/drivers/clk/mediatek/clk-mt8189-dbgao.c
new file mode 100644
index 000000000000..40307bdc93eb
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8189-dbgao.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025-2026 MediaTek Inc.
+ * Qiqi Wang <qiqi.wang@mediatek.com>
+ * Irving-CH Lin <irving-ch.lin@mediatek.com>
+ * Copyright (C) 2026 Collabora Ltd.
+ * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ * Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mediatek,mt8189-clk.h>
+
+static const struct mtk_gate_regs dbgao_cg_regs = {
+ .set_ofs = 0x70,
+ .clr_ofs = 0x70,
+ .sta_ofs = 0x70,
+};
+
+#define GATE_DBGAO(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &dbgao_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
+
+static const struct mtk_gate dbgao_clks[] = {
+ GATE_DBGAO(CLK_DBGAO_ATB_EN, "dbgao_atb_en", "atb_sel", 0),
+};
+
+static const struct mtk_clk_desc dbgao_mcd = {
+ .clks = dbgao_clks,
+ .num_clks = ARRAY_SIZE(dbgao_clks),
+};
+
+static const struct mtk_gate_regs dem0_cg_regs = {
+ .set_ofs = 0x2c,
+ .clr_ofs = 0x2c,
+ .sta_ofs = 0x2c,
+};
+
+static const struct mtk_gate_regs dem1_cg_regs = {
+ .set_ofs = 0x30,
+ .clr_ofs = 0x30,
+ .sta_ofs = 0x30,
+};
+
+static const struct mtk_gate_regs dem2_cg_regs = {
+ .set_ofs = 0x70,
+ .clr_ofs = 0x70,
+ .sta_ofs = 0x70,
+};
+
+#define GATE_DEM0(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &dem0_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
+
+#define GATE_DEM1(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &dem1_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
+
+#define GATE_DEM2(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &dem2_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
+
+static const struct mtk_gate dem_clks[] = {
+ /* DEM0 */
+ GATE_DEM0(CLK_DEM_BUSCLK_EN, "dem_busclk_en", "axi_sel", 0),
+ /* DEM1 */
+ GATE_DEM1(CLK_DEM_SYSCLK_EN, "dem_sysclk_en", "axi_sel", 0),
+ /* DEM2 */
+ GATE_DEM2(CLK_DEM_ATB_EN, "dem_atb_en", "atb_sel", 0),
+};
+
+static const struct mtk_clk_desc dem_mcd = {
+ .clks = dem_clks,
+ .num_clks = ARRAY_SIZE(dem_clks),
+};
+
+static const struct of_device_id of_match_clk_mt8189_dbgao[] = {
+ { .compatible = "mediatek,mt8189-dbg-ao", .data = &dbgao_mcd },
+ { .compatible = "mediatek,mt8189-dem", .data = &dem_mcd },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_match_clk_mt8189_dbgao);
+
+static struct platform_driver clk_mt8189_dbgao_drv = {
+ .probe = mtk_clk_simple_probe,
+ .remove = mtk_clk_simple_remove,
+ .driver = {
+ .name = "clk-mt8189-dbgao",
+ .of_match_table = of_match_clk_mt8189_dbgao,
+ },
+};
+module_platform_driver(clk_mt8189_dbgao_drv);
+
+MODULE_DESCRIPTION("MediaTek MT8189 dbgao system clocks driver");
+MODULE_LICENSE("GPL");
--
2.55.0
^ permalink raw reply related
* [PATCH v3 13/18] clk: mediatek: Add MT8189 bus clock support
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Irving-CH Lin, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Add support for the MT8189 bus clock controller,
which provides clock gate control for infra/peri IPs
(such as spi, uart, msdc, flashif ...).
Co-developed-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Co-developed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
drivers/clk/mediatek/Kconfig | 11 ++
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt8189-bus.c | 200 ++++++++++++++++++++++++++++++++++
3 files changed, 212 insertions(+)
diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index f67dfb6cd019..8eba45f05968 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -828,6 +828,17 @@ config COMMON_CLK_MT8189
with the MediaTek MT8189 hardware capabilities, providing efficient management of
clock speeds and power consumption.
+config COMMON_CLK_MT8189_BUS
+ tristate "Clock driver for MediaTek MT8189 bus"
+ depends on COMMON_CLK_MT8189
+ default COMMON_CLK_MT8189
+ help
+ Enable this configuration option to support the clock framework for
+ MediaTek MT8189 SoC bus clocks. It includes the necessary clock
+ management for bus-related peripherals and interconnects within the
+ MT8189 chipset, ensuring that all bus-related components receive the
+ correct clock signals for optimal performance.
+
config COMMON_CLK_MT8192
tristate "Clock driver for MediaTek MT8192"
depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index d9279b237b7b..aabfb42cb1b2 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -125,6 +125,7 @@ obj-$(CONFIG_COMMON_CLK_MT8188_VPPSYS) += clk-mt8188-vpp0.o clk-mt8188-vpp1.o
obj-$(CONFIG_COMMON_CLK_MT8188_WPESYS) += clk-mt8188-wpe.o
obj-$(CONFIG_COMMON_CLK_MT8189) += clk-mt8189-apmixedsys.o clk-mt8189-topckgen.o \
clk-mt8189-vlpckgen.o clk-mt8189-vlpcfg.o
+obj-$(CONFIG_COMMON_CLK_MT8189_BUS) += clk-mt8189-bus.o
obj-$(CONFIG_COMMON_CLK_MT8192) += clk-mt8192-apmixedsys.o clk-mt8192.o
obj-$(CONFIG_COMMON_CLK_MT8192_AUDSYS) += clk-mt8192-aud.o
obj-$(CONFIG_COMMON_CLK_MT8192_CAMSYS) += clk-mt8192-cam.o
diff --git a/drivers/clk/mediatek/clk-mt8189-bus.c b/drivers/clk/mediatek/clk-mt8189-bus.c
new file mode 100644
index 000000000000..494f25e85d11
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8189-bus.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025-2026 MediaTek Inc.
+ * Qiqi Wang <qiqi.wang@mediatek.com>
+ * Irving-CH Lin <irving-ch.lin@mediatek.com>
+ * Copyright (C) 2026 Collabora Ltd.
+ * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ * Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mediatek,mt8189-clk.h>
+
+static const struct mtk_gate_regs ifrao0_cg_regs = {
+ .set_ofs = 0x80,
+ .clr_ofs = 0x84,
+ .sta_ofs = 0x90,
+};
+
+static const struct mtk_gate_regs ifrao1_cg_regs = {
+ .set_ofs = 0x88,
+ .clr_ofs = 0x8c,
+ .sta_ofs = 0x94,
+};
+
+static const struct mtk_gate_regs ifrao2_cg_regs = {
+ .set_ofs = 0xa4,
+ .clr_ofs = 0xa8,
+ .sta_ofs = 0xac,
+};
+
+#define GATE_IFRAO0(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &ifrao0_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
+
+#define GATE_IFRAO1(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &ifrao1_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
+
+#define GATE_IFRAO2(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &ifrao2_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
+
+static const struct mtk_gate ifrao_clks[] = {
+ /* IFRAO0 */
+ GATE_IFRAO0(CLK_IFRAO_CQ_DMA_FPC, "ifrao_dma", "ap2con", 28),
+ /* IFRAO1 */
+ GATE_IFRAO1(CLK_IFRAO_DEBUGSYS, "ifrao_debugsys", "axi_sel", 24),
+ GATE_IFRAO1(CLK_IFRAO_DBG_TRACE, "ifrao_dbg_trace", "axi_sel", 29),
+ /* IFRAO2 */
+ GATE_IFRAO2(CLK_IFRAO_CQ_DMA, "ifrao_cq_dma", "axi_sel", 27),
+};
+
+static const struct mtk_clk_desc ifrao_mcd = {
+ .clks = ifrao_clks,
+ .num_clks = ARRAY_SIZE(ifrao_clks),
+};
+
+static const struct mtk_gate_regs perao0_cg_regs = {
+ .set_ofs = 0x24,
+ .clr_ofs = 0x28,
+ .sta_ofs = 0x10,
+};
+
+static const struct mtk_gate_regs perao1_cg_regs = {
+ .set_ofs = 0x2c,
+ .clr_ofs = 0x30,
+ .sta_ofs = 0x14,
+};
+
+static const struct mtk_gate_regs perao2_cg_regs = {
+ .set_ofs = 0x34,
+ .clr_ofs = 0x38,
+ .sta_ofs = 0x18,
+};
+
+#define GATE_PERAO0(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &perao0_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
+
+#define GATE_PERAO1(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &perao1_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
+
+#define GATE_PERAO2(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &perao2_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
+
+static const struct mtk_gate perao_clks[] = {
+ /* PERAO0 */
+ GATE_PERAO0(CLK_PERAO_UART0, "perao_uart0", "uart_sel", 0),
+ GATE_PERAO0(CLK_PERAO_UART1, "perao_uart1", "uart_sel", 1),
+ GATE_PERAO0(CLK_PERAO_UART2, "perao_uart2", "uart_sel", 2),
+ GATE_PERAO0(CLK_PERAO_UART3, "perao_uart3", "uart_sel", 3),
+ GATE_PERAO0(CLK_PERAO_PWM_H, "perao_pwm_h", "axi_peri_sel", 4),
+ GATE_PERAO0(CLK_PERAO_PWM_B, "perao_pwm_b", "pwm_sel", 5),
+ GATE_PERAO0(CLK_PERAO_PWM_FB1, "perao_pwm_fb1", "pwm_sel", 6),
+ GATE_PERAO0(CLK_PERAO_PWM_FB2, "perao_pwm_fb2", "pwm_sel", 7),
+ GATE_PERAO0(CLK_PERAO_PWM_FB3, "perao_pwm_fb3", "pwm_sel", 8),
+ GATE_PERAO0(CLK_PERAO_PWM_FB4, "perao_pwm_fb4", "pwm_sel", 9),
+ GATE_PERAO0(CLK_PERAO_DISP_PWM0, "perao_disp_pwm0", "disp_pwm_sel", 10),
+ GATE_PERAO0(CLK_PERAO_DISP_PWM1, "perao_disp_pwm1", "disp_pwm_sel", 11),
+ GATE_PERAO0(CLK_PERAO_SPI0_B, "perao_spi0_b", "spi0_sel", 12),
+ GATE_PERAO0(CLK_PERAO_SPI1_B, "perao_spi1_b", "spi1_sel", 13),
+ GATE_PERAO0(CLK_PERAO_SPI2_B, "perao_spi2_b", "spi2_sel", 14),
+ GATE_PERAO0(CLK_PERAO_SPI3_B, "perao_spi3_b", "spi3_sel", 15),
+ GATE_PERAO0(CLK_PERAO_SPI4_B, "perao_spi4_b", "spi4_sel", 16),
+ GATE_PERAO0(CLK_PERAO_SPI5_B, "perao_spi5_b", "spi5_sel", 17),
+ GATE_PERAO0(CLK_PERAO_SPI0_H, "perao_spi0_h", "axi_peri_sel", 18),
+ GATE_PERAO0(CLK_PERAO_SPI1_H, "perao_spi1_h", "axi_peri_sel", 19),
+ GATE_PERAO0(CLK_PERAO_SPI2_H, "perao_spi2_h", "axi_peri_sel", 20),
+ GATE_PERAO0(CLK_PERAO_SPI3_H, "perao_spi3_h", "axi_peri_sel", 21),
+ GATE_PERAO0(CLK_PERAO_SPI4_H, "perao_spi4_h", "axi_peri_sel", 22),
+ GATE_PERAO0(CLK_PERAO_SPI5_H, "perao_spi5_h", "axi_peri_sel", 23),
+ GATE_PERAO0(CLK_PERAO_AXI, "perao_axi", "mem_sub_peri_sel", 24),
+ GATE_PERAO0(CLK_PERAO_AHB_APB, "perao_ahb_apb", "axi_peri_sel", 25),
+ GATE_PERAO0(CLK_PERAO_TL, "perao_tl", "pcie_mac_tl_sel", 26),
+ GATE_PERAO0(CLK_PERAO_REF, "perao_ref", "pcie_f26m", 27),
+ GATE_PERAO0(CLK_PERAO_I2C, "perao_i2c", "axi_peri_sel", 28),
+ GATE_PERAO0(CLK_PERAO_DMA_B, "perao_dma_b", "axi_peri_sel", 29),
+ /* PERAO1 */
+ GATE_PERAO1(CLK_PERAO_SSUSB0_REF, "perao_ssusb0_ref", "usb2_26m_p0_en", 1),
+ GATE_PERAO1(CLK_PERAO_SSUSB0_FRMCNT, "perao_ssusb0_frmcnt", "fmcnt_p0_en", 2),
+ GATE_PERAO1(CLK_PERAO_SSUSB0_SYS, "perao_ssusb0_sys", "usb_p0_sel", 4),
+ GATE_PERAO1(CLK_PERAO_SSUSB0_XHCI, "perao_ssusb0_xhci", "ssusb_xhci_p0_sel", 5),
+ GATE_PERAO1(CLK_PERAO_SSUSB0_F, "perao_ssusb0_f", "axi_peri_sel", 6),
+ GATE_PERAO1(CLK_PERAO_SSUSB0_H, "perao_ssusb0_h", "axi_peri_sel", 7),
+ GATE_PERAO1(CLK_PERAO_SSUSB1_REF, "perao_ssusb1_ref", "usb2_26m_p1_en", 8),
+ GATE_PERAO1(CLK_PERAO_SSUSB1_FRMCNT, "perao_ssusb1_frmcnt", "fmcnt_p1_en", 9),
+ GATE_PERAO1(CLK_PERAO_SSUSB1_SYS, "perao_ssusb1_sys", "usb_p1_sel", 11),
+ GATE_PERAO1(CLK_PERAO_SSUSB1_XHCI, "perao_ssusb1_xhci", "ssusb_xhci_p1_sel", 12),
+ GATE_PERAO1(CLK_PERAO_SSUSB1_F, "perao_ssusb1_f", "axi_peri_sel", 13),
+ GATE_PERAO1(CLK_PERAO_SSUSB1_H, "perao_ssusb1_h", "axi_peri_sel", 14),
+ GATE_PERAO1(CLK_PERAO_SSUSB2_REF, "perao_ssusb2_ref", "usb2_26m_p2_en", 15),
+ GATE_PERAO1(CLK_PERAO_SSUSB2_FRMCNT, "perao_ssusb2_frmcnt", "fmcnt_p2_en", 16),
+ GATE_PERAO1(CLK_PERAO_SSUSB2_SYS, "perao_ssusb2_sys", "usb_p2_sel", 18),
+ GATE_PERAO1(CLK_PERAO_SSUSB2_XHCI, "perao_ssusb2_xhci", "ssusb_xhci_p2_sel", 19),
+ GATE_PERAO1(CLK_PERAO_SSUSB2_F, "perao_ssusb2_f", "axi_peri_sel", 20),
+ GATE_PERAO1(CLK_PERAO_SSUSB2_H, "perao_ssusb2_h", "axi_peri_sel", 21),
+ GATE_PERAO1(CLK_PERAO_SSUSB3_REF, "perao_ssusb3_ref", "usb2_26m_p3_en", 23),
+ GATE_PERAO1(CLK_PERAO_SSUSB3_FRMCNT, "perao_ssusb3_frmcnt", "fmcnt_p3_en", 24),
+ GATE_PERAO1(CLK_PERAO_SSUSB3_SYS, "perao_ssusb3_sys", "usb_p3_sel", 26),
+ GATE_PERAO1(CLK_PERAO_SSUSB3_XHCI, "perao_ssusb3_xhci", "ssusb_xhci_p3_sel", 27),
+ GATE_PERAO1(CLK_PERAO_SSUSB3_F, "perao_ssusb3_f", "axi_peri_sel", 28),
+ GATE_PERAO1(CLK_PERAO_SSUSB3_H, "perao_ssusb3_h", "axi_peri_sel", 29),
+ /* PERAO2 */
+ GATE_PERAO2(CLK_PERAO_SSUSB4_REF, "perao_ssusb4_ref", "usb2_26m_p4_en", 0),
+ GATE_PERAO2(CLK_PERAO_SSUSB4_FRMCNT, "perao_ssusb4_frmcnt", "fmcnt_p4_en", 1),
+ GATE_PERAO2(CLK_PERAO_SSUSB4_SYS, "perao_ssusb4_sys", "usb_p4_sel", 3),
+ GATE_PERAO2(CLK_PERAO_SSUSB4_XHCI, "perao_ssusb4_xhci", "ssusb_xhci_p4_sel", 4),
+ GATE_PERAO2(CLK_PERAO_SSUSB4_F, "perao_ssusb4_f", "axi_peri_sel", 5),
+ GATE_PERAO2(CLK_PERAO_SSUSB4_H, "perao_ssusb4_h", "axi_peri_sel", 6),
+ GATE_PERAO2(CLK_PERAO_MSDC0, "perao_msdc0", "msdc50_0_sel", 7),
+ GATE_PERAO2(CLK_PERAO_MSDC0_H, "perao_msdc0_h", "msdc5hclk_sel", 8),
+ GATE_PERAO2(CLK_PERAO_MSDC0_FAES, "perao_msdc0_faes", "aes_msdcfde_sel", 9),
+ GATE_PERAO2(CLK_PERAO_MSDC0_MST_F, "perao_msdc0_mst_f", "axi_peri_sel", 10),
+ GATE_PERAO2(CLK_PERAO_MSDC0_SLV_H, "perao_msdc0_slv_h", "axi_peri_sel", 11),
+ GATE_PERAO2(CLK_PERAO_MSDC1, "perao_msdc1", "msdc30_1_sel", 12),
+ GATE_PERAO2(CLK_PERAO_MSDC1_H, "perao_msdc1_h", "msdc30_1_h_sel", 13),
+ GATE_PERAO2(CLK_PERAO_MSDC1_MST_F, "perao_msdc1_mst_f", "axi_peri_sel", 14),
+ GATE_PERAO2(CLK_PERAO_MSDC1_SLV_H, "perao_msdc1_slv_h", "axi_peri_sel", 15),
+ GATE_PERAO2(CLK_PERAO_MSDC2, "perao_msdc2", "msdc30_2_sel", 16),
+ GATE_PERAO2(CLK_PERAO_MSDC2_H, "perao_msdc2_h", "msdc30_2_h_sel", 17),
+ GATE_PERAO2(CLK_PERAO_MSDC2_MST_F, "perao_msdc2_mst_f", "axi_peri_sel", 18),
+ GATE_PERAO2(CLK_PERAO_MSDC2_SLV_H, "perao_msdc2_slv_h", "axi_peri_sel", 19),
+ GATE_PERAO2(CLK_PERAO_SFLASH, "perao_sflash", "sflash_sel", 20),
+ GATE_PERAO2(CLK_PERAO_SFLASH_F, "perao_sflash_f", "axi_peri_sel", 21),
+ GATE_PERAO2(CLK_PERAO_SFLASH_H, "perao_sflash_h", "axi_peri_sel", 22),
+ GATE_PERAO2(CLK_PERAO_SFLASH_P, "perao_sflash_p", "axi_peri_sel", 23),
+ GATE_PERAO2(CLK_PERAO_AUDIO0, "perao_audio0", "axi_peri_sel", 24),
+ GATE_PERAO2(CLK_PERAO_AUDIO1, "perao_audio1", "axi_peri_sel", 25),
+ GATE_PERAO2(CLK_PERAO_AUDIO2, "perao_audio2", "aud_intbus_sel", 26),
+ GATE_PERAO2(CLK_PERAO_AUXADC_26M, "perao_auxadc_26m", "clk26m", 27),
+};
+
+static const struct mtk_clk_desc perao_mcd = {
+ .clks = perao_clks,
+ .num_clks = ARRAY_SIZE(perao_clks),
+};
+
+static const struct of_device_id of_match_clk_mt8189_bus[] = {
+ { .compatible = "mediatek,mt8189-infra-ao", .data = &ifrao_mcd },
+ { .compatible = "mediatek,mt8189-peri-ao", .data = &perao_mcd },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_match_clk_mt8189_bus);
+
+static struct platform_driver clk_mt8189_bus_drv = {
+ .probe = mtk_clk_simple_probe,
+ .remove = mtk_clk_simple_remove,
+ .driver = {
+ .name = "clk-mt8189-bus",
+ .of_match_table = of_match_clk_mt8189_bus,
+ },
+};
+module_platform_driver(clk_mt8189_bus_drv);
+
+MODULE_DESCRIPTION("MediaTek MT8189 bus/peripheral clocks driver");
+MODULE_LICENSE("GPL");
--
2.55.0
^ permalink raw reply related
* [PATCH v3 12/18] clk: mediatek: Add MT8189 vlpcfg clock support
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Irving-CH Lin, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Add support for the MT8189 vlpcfg clock controller,
which provides clock gate control for vlp domain IPs.
Co-developed-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Co-developed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
drivers/clk/mediatek/Makefile | 2 +-
drivers/clk/mediatek/clk-mt8189-vlpcfg.c | 116 +++++++++++++++++++++++++++++++
2 files changed, 117 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 3b25df9e7b50..d9279b237b7b 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -124,7 +124,7 @@ obj-$(CONFIG_COMMON_CLK_MT8188_VENCSYS) += clk-mt8188-venc.o
obj-$(CONFIG_COMMON_CLK_MT8188_VPPSYS) += clk-mt8188-vpp0.o clk-mt8188-vpp1.o
obj-$(CONFIG_COMMON_CLK_MT8188_WPESYS) += clk-mt8188-wpe.o
obj-$(CONFIG_COMMON_CLK_MT8189) += clk-mt8189-apmixedsys.o clk-mt8189-topckgen.o \
- clk-mt8189-vlpckgen.o
+ clk-mt8189-vlpckgen.o clk-mt8189-vlpcfg.o
obj-$(CONFIG_COMMON_CLK_MT8192) += clk-mt8192-apmixedsys.o clk-mt8192.o
obj-$(CONFIG_COMMON_CLK_MT8192_AUDSYS) += clk-mt8192-aud.o
obj-$(CONFIG_COMMON_CLK_MT8192_CAMSYS) += clk-mt8192-cam.o
diff --git a/drivers/clk/mediatek/clk-mt8189-vlpcfg.c b/drivers/clk/mediatek/clk-mt8189-vlpcfg.c
new file mode 100644
index 000000000000..cc4ebfd46a6f
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8189-vlpcfg.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025-2026 MediaTek Inc.
+ * Qiqi Wang <qiqi.wang@mediatek.com>
+ * Irving-CH Lin <irving-ch.lin@mediatek.com>
+ * Copyright (C) 2026 Collabora Ltd.
+ * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ * Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mediatek,mt8189-clk.h>
+
+static const struct mtk_gate_regs vlpcfg_ao_reg_cg_regs = {
+ .set_ofs = 0x0,
+ .clr_ofs = 0x0,
+ .sta_ofs = 0x0,
+};
+
+#define GATE_VLPCFG_AO_REG(_id, _name, _parent, _shift) \
+ GATE_MTK(_id, _name, _parent, &vlpcfg_ao_reg_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
+
+static const struct mtk_gate vlpcfg_ao_reg_clks[] = {
+ GATE_VLPCFG_AO_REG(CLK_VLPCFG_AO_APEINT_RX, "vlpcfg_ao_apeint_rx", "clk26m", 8),
+};
+
+static const struct mtk_clk_desc vlpcfg_ao_reg_mcd = {
+ .clks = vlpcfg_ao_reg_clks,
+ .num_clks = ARRAY_SIZE(vlpcfg_ao_reg_clks),
+};
+
+static const struct mtk_gate_regs vlpcfg_reg_cg_regs = {
+ .set_ofs = 0x4,
+ .clr_ofs = 0x4,
+ .sta_ofs = 0x4,
+};
+
+#define GATE_VLPCFG_REG_FLAGS(_id, _name, _parent, _shift, _flags) \
+ GATE_MTK_FLAGS(_id, _name, _parent, &vlpcfg_reg_cg_regs, _shift, \
+ &mtk_clk_gate_ops_no_setclr_inv, _flags)
+
+#define GATE_VLPCFG_REG(_id, _name, _parent, _shift) \
+ GATE_VLPCFG_REG_FLAGS(_id, _name, _parent, _shift, 0)
+
+static const struct mtk_gate vlpcfg_reg_clks[] = {
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_SCP, "vlpcfg_scp",
+ "vlp_scp_sel", 28, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_RG_R_APXGPT_26M, "vlpcfg_r_apxgpt_26m",
+ "clk26m", 24, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_DPMSRCK_TEST, "vlpcfg_dpmsrck_test",
+ "clk26m", 23, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_RG_DPMSRRTC_TEST, "vlpcfg_dpmsrrtc_test",
+ "clk32k", 22, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_DPMSRULP_TEST, "vlpcfg_dpmsrulp_test",
+ "osc_d10", 21, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_SPMI_P_MST, "vlpcfg_spmi_p",
+ "vlp_spmi_p_sel", 20, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_SPMI_P_MST_32K, "vlpcfg_spmi_p_32k",
+ "clk32k", 18, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_PMIF_SPMI_P_SYS, "vlpcfg_pmif_spmi_p_sys",
+ "vlp_pwrap_ulposc_sel", 13, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_PMIF_SPMI_P_TMR, "vlpcfg_pmif_spmi_p_tmr",
+ "vlp_pwrap_ulposc_sel", 12, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG(CLK_VLPCFG_REG_PMIF_SPMI_M_SYS, "vlpcfg_pmif_spmi_m_sys",
+ "vlp_pwrap_ulposc_sel", 11),
+ GATE_VLPCFG_REG(CLK_VLPCFG_REG_PMIF_SPMI_M_TMR, "vlpcfg_pmif_spmi_m_tmr",
+ "vlp_pwrap_ulposc_sel", 10),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_DVFSRC, "vlpcfg_dvfsrc",
+ "vlp_dvfsrc_sel", 9, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_PWM_VLP, "vlpcfg_pwm_vlp",
+ "vlp_pwm_vlp_sel", 8, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_SRCK, "vlpcfg_srck",
+ "vlp_srck_sel", 7, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_SSPM_F26M, "vlpcfg_sspm_f26m",
+ "vlp_sspm_f26m_sel", 4, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_SSPM_F32K, "vlpcfg_sspm_f32k",
+ "clk32k", 3, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_SSPM_ULPOSC, "vlpcfg_sspm_ulposc",
+ "vlp_sspm_ulposc_sel", 2, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_VLP_32K_COM, "vlpcfg_vlp_32k_com",
+ "clk32k", 1, CLK_IS_CRITICAL),
+ GATE_VLPCFG_REG_FLAGS(CLK_VLPCFG_REG_VLP_26M_COM, "vlpcfg_vlp_26m_com",
+ "clk26m", 0, CLK_IS_CRITICAL),
+};
+
+static const struct mtk_clk_desc vlpcfg_reg_mcd = {
+ .clks = vlpcfg_reg_clks,
+ .num_clks = ARRAY_SIZE(vlpcfg_reg_clks),
+};
+
+static const struct of_device_id of_match_clk_mt8189_vlpcfg[] = {
+ { .compatible = "mediatek,mt8189-vlpcfg", .data = &vlpcfg_reg_mcd },
+ { .compatible = "mediatek,mt8189-vlpcfg-ao", .data = &vlpcfg_ao_reg_mcd },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_match_clk_mt8189_vlpcfg);
+
+static struct platform_driver clk_mt8189_vlpcfg_drv = {
+ .probe = mtk_clk_simple_probe,
+ .remove = mtk_clk_simple_remove,
+ .driver = {
+ .name = "clk-mt8189-vlpcfg",
+ .of_match_table = of_match_clk_mt8189_vlpcfg,
+ },
+};
+module_platform_driver(clk_mt8189_vlpcfg_drv);
+
+MODULE_DESCRIPTION("MediaTek MT8189 vlpcfg clocks driver");
+MODULE_LICENSE("GPL");
--
2.55.0
^ permalink raw reply related
* [PATCH v3 08/18] dt-bindings: clock: mediatek: Add MT8189 system/base clocks and resets
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Irving-CH Lin, Conor Dooley,
Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Add compatible and binding headers files for system and base clock
controllers and reset controllers support of MediaTek MT8189 SoC.
The MT8189 clock IP provide clock control for main system (apmixedsys,
topcksys and vlpcksys) and subsys (eg. peri, scp, ufs...).
Also, add compatible for frequency hopping and spread spectrum clock
functionality.
Co-developed-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
.../bindings/clock/mediatek,mt8186-clock.yaml | 15 +
.../bindings/clock/mediatek,mt8186-fhctl.yaml | 1 +
.../bindings/clock/mediatek,mt8186-sys-clock.yaml | 5 +
include/dt-bindings/clock/mediatek,mt8189-clk.h | 433 +++++++++++++++++++++
include/dt-bindings/reset/mediatek,mt8189-resets.h | 17 +
5 files changed, 471 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
index ab9f8cb7dd6e..380dab8f4e98 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
@@ -58,6 +58,19 @@ properties:
- mediatek,mt8188-vencsys
- mediatek,mt8188-wpesys
- mediatek,mt8188-wpesys-vpp0
+ - mediatek,mt8189-dbg-ao
+ - mediatek,mt8189-dem
+ - mediatek,mt8189-dvfsrc-top
+ - mediatek,mt8189-iic-wrap-e
+ - mediatek,mt8189-iic-wrap-en
+ - mediatek,mt8189-iic-wrap-s
+ - mediatek,mt8189-iic-wrap-ws
+ - mediatek,mt8189-scp-clk
+ - mediatek,mt8189-scp-i2c-clk
+ - mediatek,mt8189-ufscfg-ao
+ - mediatek,mt8189-ufscfg-pdn
+ - mediatek,mt8189-vlpcfg
+ - mediatek,mt8189-vlpcfg-ao
- mediatek,mt8192-camsys
- mediatek,mt8192-camsys_rawa
- mediatek,mt8192-camsys_rawb
@@ -133,6 +146,8 @@ allOf:
- mediatek,mt8188-imgsys1-dip-nr
- mediatek,mt8188-imgsys1-dip-top
- mediatek,mt8188-ipesys
+ - mediatek,mt8189-ufscfg-ao
+ - mediatek,mt8189-ufscfg-pdn
then:
required:
- '#reset-cells'
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-fhctl.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-fhctl.yaml
index d00327d12e1e..824e3b2bd6c0 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8186-fhctl.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-fhctl.yaml
@@ -20,6 +20,7 @@ properties:
- mediatek,mt6795-fhctl
- mediatek,mt8173-fhctl
- mediatek,mt8186-fhctl
+ - mediatek,mt8189-fhctl
- mediatek,mt8192-fhctl
- mediatek,mt8195-fhctl
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
index 4a9d3eea4316..2575f84ef917 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
@@ -35,6 +35,11 @@ properties:
- mediatek,mt8188-infracfg-ao
- mediatek,mt8188-pericfg-ao
- mediatek,mt8188-topckgen
+ - mediatek,mt8189-apmixedsys
+ - mediatek,mt8189-infra-ao
+ - mediatek,mt8189-peri-ao
+ - mediatek,mt8189-topckgen
+ - mediatek,mt8189-vlpckgen
- mediatek,mt8192-apmixedsys
- mediatek,mt8192-infracfg
- mediatek,mt8192-pericfg
diff --git a/include/dt-bindings/clock/mediatek,mt8189-clk.h b/include/dt-bindings/clock/mediatek,mt8189-clk.h
new file mode 100644
index 000000000000..ca433f969698
--- /dev/null
+++ b/include/dt-bindings/clock/mediatek,mt8189-clk.h
@@ -0,0 +1,433 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2025-2026 MediaTek Inc.
+ * Qiqi Wang <qiqi.wang@mediatek.com>
+ * Irving-CH Lin <irving-ch.lin@mediatek.com>
+ * Copyright (C) 2026 Collabora Ltd.
+ * Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_MT8189_H
+#define _DT_BINDINGS_CLK_MT8189_H
+
+/* TOPCKGEN */
+#define CLK_TOP_AXI_SEL 0
+#define CLK_TOP_AXI_PERI_SEL 1
+#define CLK_TOP_AXI_U_SEL 2
+#define CLK_TOP_BUS_AXIMEM_SEL 3
+#define CLK_TOP_DISP0_SEL 4
+#define CLK_TOP_MMINFRA_SEL 5
+#define CLK_TOP_UART_SEL 6
+#define CLK_TOP_SPI0_SEL 7
+#define CLK_TOP_SPI1_SEL 8
+#define CLK_TOP_SPI2_SEL 9
+#define CLK_TOP_SPI3_SEL 10
+#define CLK_TOP_SPI4_SEL 11
+#define CLK_TOP_SPI5_SEL 12
+#define CLK_TOP_MSDC_MACRO_0P_SEL 13
+#define CLK_TOP_MSDC50_0_HCLK_SEL 14
+#define CLK_TOP_MSDC50_0_SEL 15
+#define CLK_TOP_AES_MSDCFDE_SEL 16
+#define CLK_TOP_MSDC_MACRO_1P_SEL 17
+#define CLK_TOP_MSDC30_1_SEL 18
+#define CLK_TOP_MSDC30_1_HCLK_SEL 19
+#define CLK_TOP_MSDC_MACRO_2P_SEL 20
+#define CLK_TOP_MSDC30_2_SEL 21
+#define CLK_TOP_MSDC30_2_HCLK_SEL 22
+#define CLK_TOP_AUD_INTBUS_SEL 23
+#define CLK_TOP_ATB_SEL 24
+#define CLK_TOP_DISP_PWM_SEL 25
+#define CLK_TOP_USB_TOP_P0_SEL 26
+#define CLK_TOP_USB_XHCI_P0_SEL 27
+#define CLK_TOP_USB_TOP_P1_SEL 28
+#define CLK_TOP_USB_XHCI_P1_SEL 29
+#define CLK_TOP_USB_TOP_P2_SEL 30
+#define CLK_TOP_USB_XHCI_P2_SEL 31
+#define CLK_TOP_USB_TOP_P3_SEL 32
+#define CLK_TOP_USB_XHCI_P3_SEL 33
+#define CLK_TOP_USB_TOP_P4_SEL 34
+#define CLK_TOP_USB_XHCI_P4_SEL 35
+#define CLK_TOP_I2C_SEL 36
+#define CLK_TOP_SENINF_SEL 37
+#define CLK_TOP_SENINF1_SEL 38
+#define CLK_TOP_AUD_ENGEN1_SEL 39
+#define CLK_TOP_AUD_ENGEN2_SEL 40
+#define CLK_TOP_AES_UFSFDE_SEL 41
+#define CLK_TOP_U_SEL 42
+#define CLK_TOP_U_MBIST_SEL 43
+#define CLK_TOP_AUD_1_SEL 44
+#define CLK_TOP_AUD_2_SEL 45
+#define CLK_TOP_VENC_SEL 46
+#define CLK_TOP_VDEC_SEL 47
+#define CLK_TOP_PWM_SEL 48
+#define CLK_TOP_AUDIO_H_SEL 49
+#define CLK_TOP_MCUPM_SEL 50
+#define CLK_TOP_MEM_SUB_SEL 51
+#define CLK_TOP_MEM_SUB_PERI_SEL 52
+#define CLK_TOP_MEM_SUB_U_SEL 53
+#define CLK_TOP_EMI_N_SEL 54
+#define CLK_TOP_DSI_OCC_SEL 55
+#define CLK_TOP_AP2CONN_HOST_SEL 56
+#define CLK_TOP_IMG1_SEL 57
+#define CLK_TOP_IPE_SEL 58
+#define CLK_TOP_CAM_SEL 59
+#define CLK_TOP_CAMTM_SEL 60
+#define CLK_TOP_DSP_SEL 61
+#define CLK_TOP_SR_PKA_SEL 62
+#define CLK_TOP_DXCC_SEL 63
+#define CLK_TOP_MFG_REF_SEL 64
+#define CLK_TOP_MDP0_SEL 65
+#define CLK_TOP_DP_SEL 66
+#define CLK_TOP_EDP_SEL 67
+#define CLK_TOP_EDP_FAVT_SEL 68
+#define CLK_TOP_ETH_250M_SEL 69
+#define CLK_TOP_ETH_62P4M_PTP_SEL 70
+#define CLK_TOP_ETH_50M_RMII_SEL 71
+#define CLK_TOP_SFLASH_SEL 72
+#define CLK_TOP_GCPU_SEL 73
+#define CLK_TOP_MAC_TL_SEL 74
+#define CLK_TOP_VDSTX_DG_CTS_SEL 75
+#define CLK_TOP_PLL_DPIX_SEL 76
+#define CLK_TOP_ECC_SEL 77
+#define CLK_TOP_APLL_I2SIN0_MCK_SEL 78
+#define CLK_TOP_APLL_I2SIN1_MCK_SEL 79
+#define CLK_TOP_APLL_I2SIN2_MCK_SEL 80
+#define CLK_TOP_APLL_I2SIN3_MCK_SEL 81
+#define CLK_TOP_APLL_I2SIN4_MCK_SEL 82
+#define CLK_TOP_APLL_I2SIN6_MCK_SEL 83
+#define CLK_TOP_APLL_I2SOUT0_MCK_SEL 84
+#define CLK_TOP_APLL_I2SOUT1_MCK_SEL 85
+#define CLK_TOP_APLL_I2SOUT2_MCK_SEL 86
+#define CLK_TOP_APLL_I2SOUT3_MCK_SEL 87
+#define CLK_TOP_APLL_I2SOUT4_MCK_SEL 88
+#define CLK_TOP_APLL_I2SOUT6_MCK_SEL 89
+#define CLK_TOP_APLL_FMI2S_MCK_SEL 90
+#define CLK_TOP_APLL_TDMOUT_MCK_SEL 91
+#define CLK_TOP_MFG_SEL_MFGPLL 92
+#define CLK_TOP_APLL12_CK_DIV_I2SIN0 93
+#define CLK_TOP_APLL12_CK_DIV_I2SIN1 94
+#define CLK_TOP_APLL12_CK_DIV_I2SOUT0 95
+#define CLK_TOP_APLL12_CK_DIV_I2SOUT1 96
+#define CLK_TOP_APLL12_CK_DIV_FMI2S 97
+#define CLK_TOP_APLL12_CK_DIV_TDMOUT_M 98
+#define CLK_TOP_APLL12_CK_DIV_TDMOUT_B 99
+#define CLK_TOP_MAINPLL_D3 100
+#define CLK_TOP_MAINPLL_D4 101
+#define CLK_TOP_MAINPLL_D4_D2 102
+#define CLK_TOP_MAINPLL_D4_D4 103
+#define CLK_TOP_MAINPLL_D4_D8 104
+#define CLK_TOP_MAINPLL_D5 105
+#define CLK_TOP_MAINPLL_D5_D2 106
+#define CLK_TOP_MAINPLL_D5_D4 107
+#define CLK_TOP_MAINPLL_D5_D8 108
+#define CLK_TOP_MAINPLL_D6 109
+#define CLK_TOP_MAINPLL_D6_D2 110
+#define CLK_TOP_MAINPLL_D6_D4 111
+#define CLK_TOP_MAINPLL_D6_D8 112
+#define CLK_TOP_MAINPLL_D7 113
+#define CLK_TOP_MAINPLL_D7_D2 114
+#define CLK_TOP_MAINPLL_D7_D4 115
+#define CLK_TOP_MAINPLL_D7_D8 116
+#define CLK_TOP_MAINPLL_D9 117
+#define CLK_TOP_UNIVPLL_D2 118
+#define CLK_TOP_UNIVPLL_D3 119
+#define CLK_TOP_UNIVPLL_D4 120
+#define CLK_TOP_UNIVPLL_D4_D2 121
+#define CLK_TOP_UNIVPLL_D4_D4 122
+#define CLK_TOP_UNIVPLL_D4_D8 123
+#define CLK_TOP_UNIVPLL_D5 124
+#define CLK_TOP_UNIVPLL_D5_D2 125
+#define CLK_TOP_UNIVPLL_D5_D4 126
+#define CLK_TOP_UNIVPLL_D6 127
+#define CLK_TOP_UNIVPLL_D6_D2 128
+#define CLK_TOP_UNIVPLL_D6_D4 129
+#define CLK_TOP_UNIVPLL_D6_D8 130
+#define CLK_TOP_UNIVPLL_D6_D16 131
+#define CLK_TOP_UNIVPLL_D7 132
+#define CLK_TOP_UNIVPLL_D7_D2 133
+#define CLK_TOP_UNIVPLL_D7_D3 134
+#define CLK_TOP_LVDSTX_DG_CTS 135
+#define CLK_TOP_UNIVPLL_192M 136
+#define CLK_TOP_UNIVPLL_192M_D2 137
+#define CLK_TOP_UNIVPLL_192M_D4 138
+#define CLK_TOP_UNIVPLL_192M_D8 139
+#define CLK_TOP_UNIVPLL_192M_D10 140
+#define CLK_TOP_UNIVPLL_192M_D16 141
+#define CLK_TOP_UNIVPLL_192M_D32 142
+#define CLK_TOP_APLL1_D2 143
+#define CLK_TOP_APLL1_D4 144
+#define CLK_TOP_APLL1_D8 145
+#define CLK_TOP_APLL1_D3 146
+#define CLK_TOP_APLL2_D2 147
+#define CLK_TOP_APLL2_D4 148
+#define CLK_TOP_APLL2_D8 149
+#define CLK_TOP_APLL2_D3 150
+#define CLK_TOP_MMPLL_D4 151
+#define CLK_TOP_MMPLL_D4_D2 152
+#define CLK_TOP_MMPLL_D4_D4 153
+#define CLK_TOP_VPLL_DPIX 154
+#define CLK_TOP_MMPLL_D5 155
+#define CLK_TOP_MMPLL_D5_D2 156
+#define CLK_TOP_MMPLL_D5_D4 157
+#define CLK_TOP_MMPLL_D6 158
+#define CLK_TOP_MMPLL_D6_D2 159
+#define CLK_TOP_MMPLL_D7 160
+#define CLK_TOP_MMPLL_D9 161
+#define CLK_TOP_TVDPLL1_D2 162
+#define CLK_TOP_TVDPLL1_D4 163
+#define CLK_TOP_TVDPLL1_D8 164
+#define CLK_TOP_TVDPLL1_D16 165
+#define CLK_TOP_TVDPLL2_D2 166
+#define CLK_TOP_TVDPLL2_D4 167
+#define CLK_TOP_TVDPLL2_D8 168
+#define CLK_TOP_TVDPLL2_D16 169
+#define CLK_TOP_ETHPLL_D2 170
+#define CLK_TOP_ETHPLL_D8 171
+#define CLK_TOP_ETHPLL_D10 172
+#define CLK_TOP_MSDCPLL_D2 173
+#define CLK_TOP_UFSPLL_D2 174
+#define CLK_TOP_F26M_CK_D2 175
+#define CLK_TOP_OSC_D2 176
+#define CLK_TOP_OSC_D4 177
+#define CLK_TOP_OSC_D8 178
+#define CLK_TOP_OSC_D16 179
+#define CLK_TOP_OSC_D3 180
+#define CLK_TOP_OSC_D7 181
+#define CLK_TOP_OSC_D10 182
+#define CLK_TOP_OSC_D20 183
+#define CLK_TOP_FMCNT_P0_EN 184
+#define CLK_TOP_FMCNT_P1_EN 185
+#define CLK_TOP_FMCNT_P2_EN 186
+#define CLK_TOP_FMCNT_P3_EN 187
+#define CLK_TOP_FMCNT_P4_EN 188
+#define CLK_TOP_USB_F26M_CK_EN 189
+#define CLK_TOP_SSPXTP_F26M_CK_EN 190
+#define CLK_TOP_USB2_PHY_RF_P0_EN 191
+#define CLK_TOP_USB2_PHY_RF_P1_EN 192
+#define CLK_TOP_USB2_PHY_RF_P2_EN 193
+#define CLK_TOP_USB2_PHY_RF_P3_EN 194
+#define CLK_TOP_USB2_PHY_RF_P4_EN 195
+#define CLK_TOP_USB2_26M_CK_P0_EN 196
+#define CLK_TOP_USB2_26M_CK_P1_EN 197
+#define CLK_TOP_USB2_26M_CK_P2_EN 198
+#define CLK_TOP_USB2_26M_CK_P3_EN 199
+#define CLK_TOP_USB2_26M_CK_P4_EN 200
+#define CLK_TOP_F26M_CK_EN 201
+#define CLK_TOP_AP2CON_EN 202
+#define CLK_TOP_EINT_N_EN 203
+#define CLK_TOP_TOPCKGEN_FMIPI_CSI_UP26M_CK_EN 204
+#define CLK_TOP_EINT_E_EN 205
+#define CLK_TOP_EINT_W_EN 206
+#define CLK_TOP_EINT_S_EN 207
+
+/* INFRACFG_AO */
+#define CLK_IFRAO_CQ_DMA_FPC 0
+#define CLK_IFRAO_DEBUGSYS 1
+#define CLK_IFRAO_DBG_TRACE 2
+#define CLK_IFRAO_CQ_DMA 3
+
+/* APMIXEDSYS */
+#define CLK_APMIXED_ARMPLL_LL 0
+#define CLK_APMIXED_ARMPLL_BL 1
+#define CLK_APMIXED_CCIPLL 2
+#define CLK_APMIXED_MAINPLL 3
+#define CLK_APMIXED_UNIVPLL 4
+#define CLK_APMIXED_MMPLL 5
+#define CLK_APMIXED_MFGPLL 6
+#define CLK_APMIXED_APLL1 7
+#define CLK_APMIXED_APLL2 8
+#define CLK_APMIXED_EMIPLL 9
+#define CLK_APMIXED_APUPLL2 10
+#define CLK_APMIXED_APUPLL 11
+#define CLK_APMIXED_TVDPLL1 12
+#define CLK_APMIXED_TVDPLL2 13
+#define CLK_APMIXED_ETHPLL 14
+#define CLK_APMIXED_MSDCPLL 15
+#define CLK_APMIXED_UFSPLL 16
+
+/* PERICFG_AO */
+#define CLK_PERAO_UART0 0
+#define CLK_PERAO_UART1 1
+#define CLK_PERAO_UART2 2
+#define CLK_PERAO_UART3 3
+#define CLK_PERAO_PWM_H 4
+#define CLK_PERAO_PWM_B 5
+#define CLK_PERAO_PWM_FB1 6
+#define CLK_PERAO_PWM_FB2 7
+#define CLK_PERAO_PWM_FB3 8
+#define CLK_PERAO_PWM_FB4 9
+#define CLK_PERAO_DISP_PWM0 10
+#define CLK_PERAO_DISP_PWM1 11
+#define CLK_PERAO_SPI0_B 12
+#define CLK_PERAO_SPI1_B 13
+#define CLK_PERAO_SPI2_B 14
+#define CLK_PERAO_SPI3_B 15
+#define CLK_PERAO_SPI4_B 16
+#define CLK_PERAO_SPI5_B 17
+#define CLK_PERAO_SPI0_H 18
+#define CLK_PERAO_SPI1_H 19
+#define CLK_PERAO_SPI2_H 20
+#define CLK_PERAO_SPI3_H 21
+#define CLK_PERAO_SPI4_H 22
+#define CLK_PERAO_SPI5_H 23
+#define CLK_PERAO_AXI 24
+#define CLK_PERAO_AHB_APB 25
+#define CLK_PERAO_TL 26
+#define CLK_PERAO_REF 27
+#define CLK_PERAO_I2C 28
+#define CLK_PERAO_DMA_B 29
+#define CLK_PERAO_SSUSB0_REF 30
+#define CLK_PERAO_SSUSB0_FRMCNT 31
+#define CLK_PERAO_SSUSB0_SYS 32
+#define CLK_PERAO_SSUSB0_XHCI 33
+#define CLK_PERAO_SSUSB0_F 34
+#define CLK_PERAO_SSUSB0_H 35
+#define CLK_PERAO_SSUSB1_REF 36
+#define CLK_PERAO_SSUSB1_FRMCNT 37
+#define CLK_PERAO_SSUSB1_SYS 38
+#define CLK_PERAO_SSUSB1_XHCI 39
+#define CLK_PERAO_SSUSB1_F 40
+#define CLK_PERAO_SSUSB1_H 41
+#define CLK_PERAO_SSUSB2_REF 42
+#define CLK_PERAO_SSUSB2_FRMCNT 43
+#define CLK_PERAO_SSUSB2_SYS 44
+#define CLK_PERAO_SSUSB2_XHCI 45
+#define CLK_PERAO_SSUSB2_F 46
+#define CLK_PERAO_SSUSB2_H 47
+#define CLK_PERAO_SSUSB3_REF 48
+#define CLK_PERAO_SSUSB3_FRMCNT 49
+#define CLK_PERAO_SSUSB3_SYS 50
+#define CLK_PERAO_SSUSB3_XHCI 51
+#define CLK_PERAO_SSUSB3_F 52
+#define CLK_PERAO_SSUSB3_H 53
+#define CLK_PERAO_SSUSB4_REF 54
+#define CLK_PERAO_SSUSB4_FRMCNT 55
+#define CLK_PERAO_SSUSB4_SYS 56
+#define CLK_PERAO_SSUSB4_XHCI 57
+#define CLK_PERAO_SSUSB4_F 58
+#define CLK_PERAO_SSUSB4_H 59
+#define CLK_PERAO_MSDC0 60
+#define CLK_PERAO_MSDC0_H 61
+#define CLK_PERAO_MSDC0_FAES 62
+#define CLK_PERAO_MSDC0_MST_F 63
+#define CLK_PERAO_MSDC0_SLV_H 64
+#define CLK_PERAO_MSDC1 65
+#define CLK_PERAO_MSDC1_H 66
+#define CLK_PERAO_MSDC1_MST_F 67
+#define CLK_PERAO_MSDC1_SLV_H 68
+#define CLK_PERAO_MSDC2 69
+#define CLK_PERAO_MSDC2_H 70
+#define CLK_PERAO_MSDC2_MST_F 71
+#define CLK_PERAO_MSDC2_SLV_H 72
+#define CLK_PERAO_SFLASH 73
+#define CLK_PERAO_SFLASH_F 74
+#define CLK_PERAO_SFLASH_H 75
+#define CLK_PERAO_SFLASH_P 76
+#define CLK_PERAO_AUDIO0 77
+#define CLK_PERAO_AUDIO1 78
+#define CLK_PERAO_AUDIO2 79
+#define CLK_PERAO_AUXADC_26M 80
+
+/* UFSCFG_AO_REG */
+#define CLK_UFSCFG_AO_REG_UNIPRO_TX_SYM 0
+#define CLK_UFSCFG_AO_REG_UNIPRO_RX_SYM0 1
+#define CLK_UFSCFG_AO_REG_UNIPRO_RX_SYM1 2
+#define CLK_UFSCFG_AO_REG_UNIPRO_SYS 3
+#define CLK_UFSCFG_AO_REG_U_SAP_CFG 4
+#define CLK_UFSCFG_AO_REG_U_PHY_TOP_AHB_S_BUS 5
+
+/* UFSCFG_PDN_REG */
+#define CLK_UFSCFG_REG_UFSHCI_UFS 0
+#define CLK_UFSCFG_REG_UFSHCI_AES 1
+#define CLK_UFSCFG_REG_UFSHCI_U_AHB 2
+#define CLK_UFSCFG_REG_UFSHCI_U_AXI 3
+
+/* IMP_IIC_WRAP_WS */
+#define CLK_IMPWS_I2C2 0
+
+/* IMP_IIC_WRAP_E */
+#define CLK_IMPE_I2C0 0
+#define CLK_IMPE_I2C1 1
+
+/* IMP_IIC_WRAP_S */
+#define CLK_IMPS_I2C3 0
+#define CLK_IMPS_I2C4 1
+#define CLK_IMPS_I2C5 2
+#define CLK_IMPS_I2C6 3
+
+/* IMP_IIC_WRAP_EN */
+#define CLK_IMPEN_I2C7 0
+#define CLK_IMPEN_I2C8 1
+
+/* VLPCFG_REG */
+#define CLK_VLPCFG_REG_SCP 0
+#define CLK_VLPCFG_REG_RG_R_APXGPT_26M 1
+#define CLK_VLPCFG_REG_DPMSRCK_TEST 2
+#define CLK_VLPCFG_REG_RG_DPMSRRTC_TEST 3
+#define CLK_VLPCFG_REG_DPMSRULP_TEST 4
+#define CLK_VLPCFG_REG_SPMI_P_MST 5
+#define CLK_VLPCFG_REG_SPMI_P_MST_32K 6
+#define CLK_VLPCFG_REG_PMIF_SPMI_P_SYS 7
+#define CLK_VLPCFG_REG_PMIF_SPMI_P_TMR 8
+#define CLK_VLPCFG_REG_PMIF_SPMI_M_SYS 9
+#define CLK_VLPCFG_REG_PMIF_SPMI_M_TMR 10
+#define CLK_VLPCFG_REG_DVFSRC 11
+#define CLK_VLPCFG_REG_PWM_VLP 12
+#define CLK_VLPCFG_REG_SRCK 13
+#define CLK_VLPCFG_REG_SSPM_F26M 14
+#define CLK_VLPCFG_REG_SSPM_F32K 15
+#define CLK_VLPCFG_REG_SSPM_ULPOSC 16
+#define CLK_VLPCFG_REG_VLP_32K_COM 17
+#define CLK_VLPCFG_REG_VLP_26M_COM 18
+
+/* VLP_CKSYS */
+#define CLK_VLP_CK_SCP_SEL 0
+#define CLK_VLP_CK_PWRAP_ULPOSC_SEL 1
+#define CLK_VLP_CK_SPMI_P_MST_SEL 2
+#define CLK_VLP_CK_DVFSRC_SEL 3
+#define CLK_VLP_CK_PWM_VLP_SEL 4
+#define CLK_VLP_CK_AXI_VLP_SEL 5
+#define CLK_VLP_CK_SYSTIMER_26M_SEL 6
+#define CLK_VLP_CK_SSPM_SEL 7
+#define CLK_VLP_CK_SSPM_F26M_SEL 8
+#define CLK_VLP_CK_SRCK_SEL 9
+#define CLK_VLP_CK_SCP_SPI_SEL 10
+#define CLK_VLP_CK_SCP_IIC_SEL 11
+#define CLK_VLP_CK_SCP_SPI_HIGH_SPD_SEL 12
+#define CLK_VLP_CK_SCP_IIC_HIGH_SPD_SEL 13
+#define CLK_VLP_CK_SSPM_ULPOSC_SEL 14
+#define CLK_VLP_CK_APXGPT_26M_SEL 15
+#define CLK_VLP_CK_VADSP_SEL 16
+#define CLK_VLP_CK_VADSP_VOWPLL_SEL 17
+#define CLK_VLP_CK_VADSP_UARTHUB_BCLK_SEL 18
+#define CLK_VLP_CK_CAMTG0_SEL 19
+#define CLK_VLP_CK_CAMTG1_SEL 20
+#define CLK_VLP_CK_CAMTG2_SEL 21
+#define CLK_VLP_CK_AUD_ADC_SEL 22
+#define CLK_VLP_CK_KP_IRQ_GEN_SEL 23
+#define CLK_VLP_CK_VADSYS_VLP_26M_EN 24
+#define CLK_VLP_CK_FMIPI_CSI_UP26M_CK_EN 25
+
+/* SCP_IIC */
+#define CLK_SCP_IIC_I2C0_W1S 0
+#define CLK_SCP_IIC_I2C1_W1S 1
+
+/* SCP */
+#define CLK_SCP_SET_SPI0 0
+#define CLK_SCP_SET_SPI1 1
+
+/* VLPCFG_AO_REG */
+#define CLK_VLPCFG_AO_APEINT_RX 0
+
+/* DVFSRC_TOP */
+#define CLK_DVFSRC_TOP_DVFSRC_EN 0
+
+/* DBGAO */
+#define CLK_DBGAO_ATB_EN 0
+
+/* DEM */
+#define CLK_DEM_ATB_EN 0
+#define CLK_DEM_BUSCLK_EN 1
+#define CLK_DEM_SYSCLK_EN 2
+
+#endif /* _DT_BINDINGS_CLK_MT8189_H */
diff --git a/include/dt-bindings/reset/mediatek,mt8189-resets.h b/include/dt-bindings/reset/mediatek,mt8189-resets.h
new file mode 100644
index 000000000000..0f31984374be
--- /dev/null
+++ b/include/dt-bindings/reset/mediatek,mt8189-resets.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2026 Collabora Ltd.
+ * Author: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8189
+#define _DT_BINDINGS_RESET_CONTROLLER_MT8189
+
+/* UFS resets */
+#define MT8189_UFSAO_RST_UFS_MPHY 0
+
+#define MT8189_UFSPDN_RST_UFS_UNIPRO 0
+#define MT8189_UFSPDN_RST_UFS_CRYPTO 1
+#define MT8189_UFSPDN_RST_UFS_HCI 2
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8189 */
--
2.55.0
^ permalink raw reply related
* [PATCH v3 11/18] clk: mediatek: Add MT8189 vlpckgen clock support
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Irving-CH Lin, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Add support for the MT8189 vlpckgen clock controller, which provides
muxes and dividers for clock selection in vlp domain for other IP blocks.
Co-developed-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Co-developed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
drivers/clk/mediatek/Makefile | 3 +-
drivers/clk/mediatek/clk-mt8189-vlpckgen.c | 285 +++++++++++++++++++++++++++++
2 files changed, 287 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 9d3d2983bfb2..3b25df9e7b50 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -123,7 +123,8 @@ obj-$(CONFIG_COMMON_CLK_MT8188_VDOSYS) += clk-mt8188-vdo0.o clk-mt8188-vdo1.o
obj-$(CONFIG_COMMON_CLK_MT8188_VENCSYS) += clk-mt8188-venc.o
obj-$(CONFIG_COMMON_CLK_MT8188_VPPSYS) += clk-mt8188-vpp0.o clk-mt8188-vpp1.o
obj-$(CONFIG_COMMON_CLK_MT8188_WPESYS) += clk-mt8188-wpe.o
-obj-$(CONFIG_COMMON_CLK_MT8189) += clk-mt8189-apmixedsys.o clk-mt8189-topckgen.o
+obj-$(CONFIG_COMMON_CLK_MT8189) += clk-mt8189-apmixedsys.o clk-mt8189-topckgen.o \
+ clk-mt8189-vlpckgen.o
obj-$(CONFIG_COMMON_CLK_MT8192) += clk-mt8192-apmixedsys.o clk-mt8192.o
obj-$(CONFIG_COMMON_CLK_MT8192_AUDSYS) += clk-mt8192-aud.o
obj-$(CONFIG_COMMON_CLK_MT8192_CAMSYS) += clk-mt8192-cam.o
diff --git a/drivers/clk/mediatek/clk-mt8189-vlpckgen.c b/drivers/clk/mediatek/clk-mt8189-vlpckgen.c
new file mode 100644
index 000000000000..8eda5331972e
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8189-vlpckgen.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025-2026 MediaTek Inc.
+ * Qiqi Wang <qiqi.wang@mediatek.com>
+ * Irving-CH Lin <irving-ch.lin@mediatek.com>
+ * Copyright (C) 2026 Collabora Ltd.
+ * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ * Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "clk-mtk.h"
+#include "clk-mux.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mediatek,mt8189-clk.h>
+
+static DEFINE_SPINLOCK(mt8189_vlpclk_lock);
+
+static const char * const vlp_26m_oscd10_parents[] = {
+ "clk26m",
+ "osc_d10"
+};
+
+static const char * const vlp_vadsp_vowpll_parents[] = {
+ "clk26m",
+ "vowpll"
+};
+
+static const char * const vlp_sspm_ulposc_parents[] = {
+ "ulposc",
+ "univpll_d5_d2",
+ "osc_d10"
+};
+
+static const char * const vlp_aud_adc_parents[] = {
+ "clk26m",
+ "vowpll",
+ "aud_adc_ext",
+ "osc_d10"
+};
+
+static const char * const vlp_scp_iic_spi_parents[] = {
+ "clk26m",
+ "mainpll_d5_d4",
+ "mainpll_d7_d2",
+ "osc_d10"
+};
+
+static const char * const vlp_vadsp_uarthub_b_parents[] = {
+ "clk26m",
+ "osc_d10",
+ "univpll_d6_d4",
+ "univpll_d6_d2"
+};
+
+static const char * const vlp_axi_kp_parents[] = {
+ "clk26m",
+ "osc_d10",
+ "osc_d2",
+ "mainpll_d7_d4",
+ "mainpll_d7_d2"
+};
+
+static const char * const vlp_sspm_parents[] = {
+ "clk26m",
+ "osc_d10",
+ "mainpll_d5_d2",
+ "ulposc",
+ "mainpll_d6"
+};
+
+static const char * const vlp_pwm_vlp_parents[] = {
+ "clk26m",
+ "osc_d4",
+ "clk32k",
+ "osc_d10",
+ "mainpll_d4_d8"
+};
+
+static const char * const vlp_pwrap_ulposc_parents[] = {
+ "clk26m",
+ "osc_d10",
+ "osc_d7",
+ "osc_d8",
+ "osc_d16",
+ "mainpll_d7_d8"
+};
+
+static const char * const vlp_vadsp_parents[] = {
+ "clk26m",
+ "osc_d20",
+ "osc_d10",
+ "osc_d2",
+ "ulposc",
+ "mainpll_d4_d2"
+};
+
+static const char * const vlp_scp_parents[] = {
+ "clk26m",
+ "univpll_d4",
+ "univpll_d3",
+ "mainpll_d3",
+ "univpll_d6",
+ "apll1",
+ "mainpll_d4",
+ "mainpll_d6",
+ "mainpll_d7",
+ "osc_d10"
+};
+
+static const char * const vlp_spmi_p_parents[] = {
+ "clk26m",
+ "f26m_d2",
+ "osc_d8",
+ "osc_d10",
+ "osc_d16",
+ "osc_d7",
+ "clk32k",
+ "mainpll_d7_d8",
+ "mainpll_d6_d8",
+ "mainpll_d5_d8"
+};
+
+static const char * const vlp_camtg_parents[] = {
+ "clk26m",
+ "univpll_192m_d8",
+ "univpll_d6_d8",
+ "univpll_192m_d4",
+ "osc_d16",
+ "osc_d20",
+ "osc_d10",
+ "univpll_d6_d16",
+ "tvdpll1_d16",
+ "f26m_d2",
+ "univpll_192m_d10",
+ "univpll_192m_d16",
+ "univpll_192m_d32"
+};
+
+static const struct mtk_mux vlp_ck_muxes[] = {
+ /* VLP_CLK_CFG_0 */
+ MUX_GATE_CLR_SET_UPD(CLK_VLP_CK_SCP_SEL, "vlp_scp_sel",
+ vlp_scp_parents, 0x008, 0x00c, 0x010,
+ 0, 4, 7, 0x04, 0),
+ MUX_CLR_SET_UPD(CLK_VLP_CK_PWRAP_ULPOSC_SEL, "vlp_pwrap_ulposc_sel",
+ vlp_pwrap_ulposc_parents, 0x008, 0x00c, 0x010,
+ 8, 3, 0x04, 1),
+ MUX_CLR_SET_UPD(CLK_VLP_CK_SPMI_P_MST_SEL, "vlp_spmi_p_sel",
+ vlp_spmi_p_parents, 0x008, 0x00c, 0x010,
+ 16, 4, 0x04, 2),
+ MUX_CLR_SET_UPD(CLK_VLP_CK_DVFSRC_SEL, "vlp_dvfsrc_sel",
+ vlp_26m_oscd10_parents, 0x008, 0x00c, 0x010,
+ 24, 1, 0x04, 3),
+ /* VLP_CLK_CFG_1 */
+ MUX_CLR_SET_UPD(CLK_VLP_CK_PWM_VLP_SEL, "vlp_pwm_vlp_sel",
+ vlp_pwm_vlp_parents, 0x014, 0x018, 0x01c,
+ 0, 3, 0x04, 4),
+ MUX_CLR_SET_UPD(CLK_VLP_CK_AXI_VLP_SEL, "vlp_axi_vlp_sel",
+ vlp_axi_kp_parents, 0x014, 0x018, 0x01c,
+ 8, 3, 0x04, 5),
+ MUX_CLR_SET_UPD(CLK_VLP_CK_SYSTIMER_26M_SEL, "vlp_timer_26m_sel",
+ vlp_26m_oscd10_parents, 0x014, 0x018, 0x01c,
+ 16, 1, 0x04, 6),
+ MUX_CLR_SET_UPD(CLK_VLP_CK_SSPM_SEL, "vlp_sspm_sel",
+ vlp_sspm_parents, 0x014, 0x018, 0x01c,
+ 24, 3, 0x04, 7),
+ /* VLP_CLK_CFG_2 */
+ MUX_CLR_SET_UPD(CLK_VLP_CK_SSPM_F26M_SEL, "vlp_sspm_f26m_sel",
+ vlp_26m_oscd10_parents, 0x020, 0x024, 0x028,
+ 0, 1, 0x04, 8),
+ MUX_CLR_SET_UPD(CLK_VLP_CK_SRCK_SEL, "vlp_srck_sel",
+ vlp_26m_oscd10_parents, 0x020, 0x024, 0x028,
+ 8, 1, 0x04, 9),
+ MUX_CLR_SET_UPD(CLK_VLP_CK_SCP_SPI_SEL, "vlp_scp_spi_sel",
+ vlp_scp_iic_spi_parents, 0x020, 0x024, 0x028,
+ 16, 2, 0x04, 10),
+ MUX_CLR_SET_UPD(CLK_VLP_CK_SCP_IIC_SEL, "vlp_scp_iic_sel",
+ vlp_scp_iic_spi_parents, 0x020, 0x024, 0x028,
+ 24, 2, 0x04, 11),
+ /* VLP_CLK_CFG_3 */
+ MUX_CLR_SET_UPD(CLK_VLP_CK_SCP_SPI_HIGH_SPD_SEL,
+ "vlp_scp_spi_hs_sel",
+ vlp_scp_iic_spi_parents, 0x02c, 0x030, 0x034,
+ 0, 2, 0x04, 12),
+ MUX_CLR_SET_UPD(CLK_VLP_CK_SCP_IIC_HIGH_SPD_SEL,
+ "vlp_scp_iic_hs_sel",
+ vlp_scp_iic_spi_parents, 0x02c, 0x030, 0x034,
+ 8, 2, 0x04, 13),
+ MUX_CLR_SET_UPD(CLK_VLP_CK_SSPM_ULPOSC_SEL, "vlp_sspm_ulposc_sel",
+ vlp_sspm_ulposc_parents, 0x02c, 0x030, 0x034,
+ 16, 2, 0x04, 14),
+ MUX_CLR_SET_UPD(CLK_VLP_CK_APXGPT_26M_SEL, "vlp_apxgpt_26m_sel",
+ vlp_26m_oscd10_parents, 0x02c, 0x030, 0x034,
+ 24, 1, 0x04, 15),
+ /* VLP_CLK_CFG_4 */
+ MUX_GATE_CLR_SET_UPD(CLK_VLP_CK_VADSP_SEL, "vlp_vadsp_sel",
+ vlp_vadsp_parents, 0x038, 0x03c, 0x040,
+ 0, 3, 7, 0x04, 16),
+ MUX_GATE_CLR_SET_UPD(CLK_VLP_CK_VADSP_VOWPLL_SEL,
+ "vlp_vadsp_vowpll_sel",
+ vlp_vadsp_vowpll_parents, 0x038, 0x03c, 0x040,
+ 8, 1, 15, 0x04, 17),
+ MUX_GATE_CLR_SET_UPD(CLK_VLP_CK_VADSP_UARTHUB_BCLK_SEL,
+ "vlp_vadsp_uarthub_b_sel",
+ vlp_vadsp_uarthub_b_parents,
+ 0x038, 0x03c, 0x040, 16, 2, 23, 0x04, 18),
+ MUX_GATE_CLR_SET_UPD(CLK_VLP_CK_CAMTG0_SEL, "vlp_camtg0_sel",
+ vlp_camtg_parents, 0x038, 0x03c, 0x040,
+ 24, 4, 31, 0x04, 19),
+ /* VLP_CLK_CFG_5 */
+ MUX_GATE_CLR_SET_UPD(CLK_VLP_CK_CAMTG1_SEL, "vlp_camtg1_sel",
+ vlp_camtg_parents, 0x044, 0x048, 0x04c,
+ 0, 4, 7, 0x04, 20),
+ MUX_GATE_CLR_SET_UPD(CLK_VLP_CK_CAMTG2_SEL, "vlp_camtg2_sel",
+ vlp_camtg_parents, 0x044, 0x048, 0x04c,
+ 8, 4, 15, 0x04, 21),
+ MUX_GATE_CLR_SET_UPD(CLK_VLP_CK_AUD_ADC_SEL, "vlp_aud_adc_sel",
+ vlp_aud_adc_parents, 0x044, 0x048, 0x04c,
+ 16, 2, 23, 0x04, 22),
+ MUX_GATE_CLR_SET_UPD(CLK_VLP_CK_KP_IRQ_GEN_SEL, "vlp_kp_irq_sel",
+ vlp_axi_kp_parents, 0x044, 0x048, 0x04c,
+ 24, 3, 31, 0x04, 23),
+};
+
+static const struct mtk_gate_regs vlp_ck_cg_regs = {
+ .set_ofs = 0x1f4,
+ .clr_ofs = 0x1f8,
+ .sta_ofs = 0x1f0,
+};
+
+#define GATE_VLP_CK_FLAGS(_id, _name, _parent, _shift, _flag) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &vlp_ck_cg_regs, \
+ .shift = _shift, \
+ .flags = _flag, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+#define GATE_VLP_CK(_id, _name, _parent, _shift) \
+ GATE_VLP_CK_FLAGS(_id, _name, _parent, _shift, 0)
+
+static const struct mtk_gate vlp_ck_clks[] = {
+ GATE_VLP_CK(CLK_VLP_CK_VADSYS_VLP_26M_EN, "vlp_vadsys_vlp_26m", "clk26m", 1),
+ GATE_VLP_CK_FLAGS(CLK_VLP_CK_FMIPI_CSI_UP26M_CK_EN, "vlp_fmipi_csi_up26m",
+ "fmipi_csi_up26m", 11, CLK_IS_CRITICAL),
+};
+
+static const struct mtk_clk_desc vlpck_desc = {
+ .mux_clks = vlp_ck_muxes,
+ .num_mux_clks = ARRAY_SIZE(vlp_ck_muxes),
+ .clks = vlp_ck_clks,
+ .num_clks = ARRAY_SIZE(vlp_ck_clks),
+ .clk_lock = &mt8189_vlpclk_lock,
+};
+
+static const struct of_device_id of_match_clk_mt8189_vlpck[] = {
+ { .compatible = "mediatek,mt8189-vlpckgen", .data = &vlpck_desc },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_match_clk_mt8189_vlpck);
+
+static struct platform_driver clk_mt8189_vlpck_drv = {
+ .probe = mtk_clk_simple_probe,
+ .remove = mtk_clk_simple_remove,
+ .driver = {
+ .name = "clk-mt8189-vlpck",
+ .of_match_table = of_match_clk_mt8189_vlpck,
+ },
+};
+module_platform_driver(clk_mt8189_vlpck_drv);
+
+MODULE_DESCRIPTION("MediaTek MT8189 vlpckgen clocks driver");
+MODULE_LICENSE("GPL");
--
2.55.0
^ permalink raw reply related
* [PATCH v3 06/18] dt-bindings: clock: mediatek: regroup MT8192 dt-bindings into MT8186
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Conor Dooley, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Regroup the MT8192 clock and system clock dt-bindings into MT8186 ones
to ease maintainability and have common files for several currently
supported SoC or new future ones, that have the same kind of clock
controller design.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
.../bindings/clock/mediatek,mt8186-clock.yaml | 20 +++
.../bindings/clock/mediatek,mt8186-sys-clock.yaml | 4 +
.../bindings/clock/mediatek,mt8192-clock.yaml | 192 ---------------------
.../bindings/clock/mediatek,mt8192-sys-clock.yaml | 69 --------
4 files changed, 24 insertions(+), 261 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
index 0bc2da60a601..b5988d122e4d 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
@@ -58,6 +58,26 @@ properties:
- mediatek,mt8188-vencsys
- mediatek,mt8188-wpesys
- mediatek,mt8188-wpesys-vpp0
+ - mediatek,mt8192-camsys
+ - mediatek,mt8192-camsys_rawa
+ - mediatek,mt8192-camsys_rawb
+ - mediatek,mt8192-camsys_rawc
+ - mediatek,mt8192-imgsys
+ - mediatek,mt8192-imgsys2
+ - mediatek,mt8192-imp_iic_wrap_c
+ - mediatek,mt8192-imp_iic_wrap_e
+ - mediatek,mt8192-imp_iic_wrap_s
+ - mediatek,mt8192-imp_iic_wrap_ws
+ - mediatek,mt8192-imp_iic_wrap_w
+ - mediatek,mt8192-imp_iic_wrap_n
+ - mediatek,mt8192-ipesys
+ - mediatek,mt8192-mdpsys
+ - mediatek,mt8192-mfgcfg
+ - mediatek,mt8192-msdc_top
+ - mediatek,mt8192-scp_adsp
+ - mediatek,mt8192-vdecsys_soc
+ - mediatek,mt8192-vdecsys
+ - mediatek,mt8192-vencsys
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
index 199eac2034f2..41b8c61132e2 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
@@ -35,6 +35,10 @@ properties:
- mediatek,mt8188-infracfg-ao
- mediatek,mt8188-pericfg-ao
- mediatek,mt8188-topckgen
+ - mediatek,mt8192-apmixedsys
+ - mediatek,mt8192-infracfg
+ - mediatek,mt8192-pericfg
+ - mediatek,mt8192-topckgen
- const: syscon
reg:
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8192-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8192-clock.yaml
deleted file mode 100644
index 65e4c2fddf5b..000000000000
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8192-clock.yaml
+++ /dev/null
@@ -1,192 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/mediatek,mt8192-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: MediaTek Functional Clock Controller for MT8192
-
-maintainers:
- - Chun-Jie Chen <chun-jie.chen@mediatek.com>
-
-description:
- The Mediatek functional clock controller provides various clocks on MT8192.
-
-properties:
- compatible:
- items:
- - enum:
- - mediatek,mt8192-scp_adsp
- - mediatek,mt8192-imp_iic_wrap_c
- - mediatek,mt8192-imp_iic_wrap_e
- - mediatek,mt8192-imp_iic_wrap_s
- - mediatek,mt8192-imp_iic_wrap_ws
- - mediatek,mt8192-imp_iic_wrap_w
- - mediatek,mt8192-imp_iic_wrap_n
- - mediatek,mt8192-msdc_top
- - mediatek,mt8192-mfgcfg
- - mediatek,mt8192-imgsys
- - mediatek,mt8192-imgsys2
- - mediatek,mt8192-vdecsys_soc
- - mediatek,mt8192-vdecsys
- - mediatek,mt8192-vencsys
- - mediatek,mt8192-camsys
- - mediatek,mt8192-camsys_rawa
- - mediatek,mt8192-camsys_rawb
- - mediatek,mt8192-camsys_rawc
- - mediatek,mt8192-ipesys
- - mediatek,mt8192-mdpsys
-
- reg:
- maxItems: 1
-
- '#clock-cells':
- const: 1
-
-required:
- - compatible
- - reg
- - '#clock-cells'
-
-additionalProperties: false
-
-examples:
- - |
- scp_adsp: clock-controller@10720000 {
- compatible = "mediatek,mt8192-scp_adsp";
- reg = <0x10720000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- imp_iic_wrap_c: clock-controller@11007000 {
- compatible = "mediatek,mt8192-imp_iic_wrap_c";
- reg = <0x11007000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- imp_iic_wrap_e: clock-controller@11cb1000 {
- compatible = "mediatek,mt8192-imp_iic_wrap_e";
- reg = <0x11cb1000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- imp_iic_wrap_s: clock-controller@11d03000 {
- compatible = "mediatek,mt8192-imp_iic_wrap_s";
- reg = <0x11d03000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- imp_iic_wrap_ws: clock-controller@11d23000 {
- compatible = "mediatek,mt8192-imp_iic_wrap_ws";
- reg = <0x11d23000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- imp_iic_wrap_w: clock-controller@11e01000 {
- compatible = "mediatek,mt8192-imp_iic_wrap_w";
- reg = <0x11e01000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- imp_iic_wrap_n: clock-controller@11f02000 {
- compatible = "mediatek,mt8192-imp_iic_wrap_n";
- reg = <0x11f02000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- msdc_top: clock-controller@11f10000 {
- compatible = "mediatek,mt8192-msdc_top";
- reg = <0x11f10000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- mfgcfg: clock-controller@13fbf000 {
- compatible = "mediatek,mt8192-mfgcfg";
- reg = <0x13fbf000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- imgsys: clock-controller@15020000 {
- compatible = "mediatek,mt8192-imgsys";
- reg = <0x15020000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- imgsys2: clock-controller@15820000 {
- compatible = "mediatek,mt8192-imgsys2";
- reg = <0x15820000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- vdecsys_soc: clock-controller@1600f000 {
- compatible = "mediatek,mt8192-vdecsys_soc";
- reg = <0x1600f000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- vdecsys: clock-controller@1602f000 {
- compatible = "mediatek,mt8192-vdecsys";
- reg = <0x1602f000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- vencsys: clock-controller@17000000 {
- compatible = "mediatek,mt8192-vencsys";
- reg = <0x17000000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- camsys: clock-controller@1a000000 {
- compatible = "mediatek,mt8192-camsys";
- reg = <0x1a000000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- camsys_rawa: clock-controller@1a04f000 {
- compatible = "mediatek,mt8192-camsys_rawa";
- reg = <0x1a04f000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- camsys_rawb: clock-controller@1a06f000 {
- compatible = "mediatek,mt8192-camsys_rawb";
- reg = <0x1a06f000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- camsys_rawc: clock-controller@1a08f000 {
- compatible = "mediatek,mt8192-camsys_rawc";
- reg = <0x1a08f000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- ipesys: clock-controller@1b000000 {
- compatible = "mediatek,mt8192-ipesys";
- reg = <0x1b000000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- mdpsys: clock-controller@1f000000 {
- compatible = "mediatek,mt8192-mdpsys";
- reg = <0x1f000000 0x1000>;
- #clock-cells = <1>;
- };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8192-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8192-sys-clock.yaml
deleted file mode 100644
index 0ebd0d60e2f6..000000000000
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8192-sys-clock.yaml
+++ /dev/null
@@ -1,69 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/mediatek,mt8192-sys-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: MediaTek System Clock Controller for MT8192
-
-maintainers:
- - Chun-Jie Chen <chun-jie.chen@mediatek.com>
-
-description:
- The Mediatek system clock controller provides various clocks and system configuration
- like reset and bus protection on MT8192.
-
-properties:
- compatible:
- items:
- - enum:
- - mediatek,mt8192-topckgen
- - mediatek,mt8192-infracfg
- - mediatek,mt8192-pericfg
- - mediatek,mt8192-apmixedsys
- - const: syscon
-
- reg:
- maxItems: 1
-
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
-required:
- - compatible
- - reg
- - '#clock-cells'
-
-additionalProperties: false
-
-examples:
- - |
- topckgen: syscon@10000000 {
- compatible = "mediatek,mt8192-topckgen", "syscon";
- reg = <0x10000000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- infracfg: syscon@10001000 {
- compatible = "mediatek,mt8192-infracfg", "syscon";
- reg = <0x10001000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- pericfg: syscon@10003000 {
- compatible = "mediatek,mt8192-pericfg", "syscon";
- reg = <0x10003000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- apmixedsys: syscon@1000c000 {
- compatible = "mediatek,mt8192-apmixedsys", "syscon";
- reg = <0x1000c000 0x1000>;
- #clock-cells = <1>;
- };
--
2.55.0
^ permalink raw reply related
* [PATCH v3 09/18] clk: mediatek: Add MT8189 apmixedsys clock support
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Irving-CH Lin, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Add support for the MT8189 apmixedsys clock controller, which provides
PLLs generated from SoC 26m.
Co-developed-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Co-developed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
drivers/clk/mediatek/Kconfig | 13 ++
drivers/clk/mediatek/Makefile | 1 +
drivers/clk/mediatek/clk-mt8189-apmixedsys.c | 196 +++++++++++++++++++++++++++
3 files changed, 210 insertions(+)
diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 2c09fd729bab..f67dfb6cd019 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -815,6 +815,19 @@ config COMMON_CLK_MT8188_WPESYS
help
This driver supports MediaTek MT8188 Warp Engine clocks.
+config COMMON_CLK_MT8189
+ tristate "Clock driver for MediaTek MT8189"
+ depends on ARM64 || COMPILE_TEST
+ select COMMON_CLK_MEDIATEK
+ select COMMON_CLK_MEDIATEK_FHCTL
+ default ARCH_MEDIATEK
+ help
+ Enable this option to support the clock management for MediaTek MT8189 SoC. This
+ includes handling of all primary clock functions and features specific to the MT8189
+ platform. Enabling this driver ensures that the system's clock functionality aligns
+ with the MediaTek MT8189 hardware capabilities, providing efficient management of
+ clock speeds and power consumption.
+
config COMMON_CLK_MT8192
tristate "Clock driver for MediaTek MT8192"
depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index d8736a060dbd..66577ccb9b93 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -123,6 +123,7 @@ obj-$(CONFIG_COMMON_CLK_MT8188_VDOSYS) += clk-mt8188-vdo0.o clk-mt8188-vdo1.o
obj-$(CONFIG_COMMON_CLK_MT8188_VENCSYS) += clk-mt8188-venc.o
obj-$(CONFIG_COMMON_CLK_MT8188_VPPSYS) += clk-mt8188-vpp0.o clk-mt8188-vpp1.o
obj-$(CONFIG_COMMON_CLK_MT8188_WPESYS) += clk-mt8188-wpe.o
+obj-$(CONFIG_COMMON_CLK_MT8189) += clk-mt8189-apmixedsys.o
obj-$(CONFIG_COMMON_CLK_MT8192) += clk-mt8192-apmixedsys.o clk-mt8192.o
obj-$(CONFIG_COMMON_CLK_MT8192_AUDSYS) += clk-mt8192-aud.o
obj-$(CONFIG_COMMON_CLK_MT8192_CAMSYS) += clk-mt8192-cam.o
diff --git a/drivers/clk/mediatek/clk-mt8189-apmixedsys.c b/drivers/clk/mediatek/clk-mt8189-apmixedsys.c
new file mode 100644
index 000000000000..0657a50c30d9
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt8189-apmixedsys.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025-2026 MediaTek Inc.
+ * Qiqi Wang <qiqi.wang@mediatek.com>
+ * Irving-CH Lin <irving-ch.lin@mediatek.com>
+ * Copyright (C) 2026 Collabora Ltd.
+ * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ * Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "clk-fhctl.h"
+#include "clk-mtk.h"
+#include "clk-pll.h"
+
+#include <dt-bindings/clock/mediatek,mt8189-clk.h>
+
+#define MT8189_PLL_FMAX (3800UL * MHZ)
+#define MT8189_PLL_FMIN (1500UL * MHZ)
+#define MT8189_PLLEN_OFS 0x70
+#define MT8189_INTEGER_BITS 8
+
+#define PLL_SETCLR(_id, _name, _reg, _en_setclr_bit, \
+ _rstb_setclr_bit, _flags, _pd_reg, \
+ _pd_shift, _tuner_reg, _tuner_en_reg, \
+ _tuner_en_bit, _pcw_reg, _pcw_shift, \
+ _pcwbits) { \
+ .id = _id, \
+ .name = _name, \
+ .en_reg = MT8189_PLLEN_OFS, \
+ .reg = _reg, \
+ .pll_en_bit = _en_setclr_bit, \
+ .rst_bar_mask = BIT(_rstb_setclr_bit), \
+ .flags = _flags, \
+ .fmax = MT8189_PLL_FMAX, \
+ .fmin = MT8189_PLL_FMIN, \
+ .pd_reg = _pd_reg, \
+ .pd_shift = _pd_shift, \
+ .tuner_reg = _tuner_reg, \
+ .tuner_en_reg = _tuner_en_reg, \
+ .tuner_en_bit = _tuner_en_bit, \
+ .pcw_reg = _pcw_reg, \
+ .pcw_shift = _pcw_shift, \
+ .pcwbits = _pcwbits, \
+ .pcwibits = MT8189_INTEGER_BITS, \
+ }
+
+static const struct mtk_pll_data apmixed_plls[] = {
+ PLL_SETCLR(CLK_APMIXED_ARMPLL_LL, "armpll-ll", 0x204, 18,
+ 0, PLL_AO, 0x208, 24, 0, 0, 0, 0x208, 0, 22),
+ PLL_SETCLR(CLK_APMIXED_ARMPLL_BL, "armpll-bl", 0x214, 17,
+ 0, PLL_AO, 0x218, 24, 0, 0, 0, 0x218, 0, 22),
+ PLL_SETCLR(CLK_APMIXED_CCIPLL, "ccipll", 0x224, 16,
+ 0, PLL_AO, 0x228, 24, 0, 0, 0, 0x228, 0, 22),
+ PLL_SETCLR(CLK_APMIXED_MAINPLL, "mainpll", 0x304, 15,
+ 23, HAVE_RST_BAR | PLL_AO,
+ 0x308, 24, 0, 0, 0, 0x308, 0, 22),
+ PLL_SETCLR(CLK_APMIXED_UNIVPLL, "univpll", 0x314, 14,
+ 23, HAVE_RST_BAR, 0x318, 24, 0, 0, 0, 0x318, 0, 22),
+ PLL_SETCLR(CLK_APMIXED_MMPLL, "mmpll", 0x324, 13,
+ 23, HAVE_RST_BAR, 0x328, 24, 0, 0, 0, 0x328, 0, 22),
+ PLL_SETCLR(CLK_APMIXED_MFGPLL, "mfgpll", 0x504, 7,
+ 0, 0, 0x508, 24, 0, 0, 0, 0x508, 0, 22),
+ PLL_SETCLR(CLK_APMIXED_APLL1, "apll1", 0x404, 11,
+ 0, 0, 0x408, 24, 0x040, 0x00c, 0, 0x40c, 0, 32),
+ PLL_SETCLR(CLK_APMIXED_APLL2, "apll2", 0x418, 10,
+ 0, 0, 0x41c, 24, 0x044, 0x00c, 1, 0x420, 0, 32),
+ PLL_SETCLR(CLK_APMIXED_EMIPLL, "emipll", 0x334, 12,
+ 0, PLL_AO, 0x338, 24, 0, 0, 0, 0x338, 0, 22),
+ PLL_SETCLR(CLK_APMIXED_APUPLL2, "apupll2", 0x614, 2,
+ 0, 0, 0x618, 24, 0, 0, 0, 0x618, 0, 22),
+ PLL_SETCLR(CLK_APMIXED_APUPLL, "apupll", 0x604, 3,
+ 0, 0, 0x608, 24, 0, 0, 0, 0x608, 0, 22),
+ PLL_SETCLR(CLK_APMIXED_TVDPLL1, "tvdpll1", 0x42c, 9,
+ 0, 0, 0x430, 24, 0, 0, 0, 0x430, 0, 22),
+ PLL_SETCLR(CLK_APMIXED_TVDPLL2, "tvdpll2", 0x43c, 8,
+ 0, 0, 0x440, 24, 0, 0, 0, 0x440, 0, 22),
+ PLL_SETCLR(CLK_APMIXED_ETHPLL, "ethpll", 0x514, 6,
+ 0, 0, 0x518, 24, 0, 0, 0, 0x518, 0, 22),
+ PLL_SETCLR(CLK_APMIXED_MSDCPLL, "msdcpll", 0x524, 5,
+ 0, 0, 0x528, 24, 0, 0, 0, 0x528, 0, 22),
+ PLL_SETCLR(CLK_APMIXED_UFSPLL, "ufspll", 0x534, 4,
+ 0, 0, 0x538, 24, 0, 0, 0, 0x538, 0, 22),
+};
+
+#define FH(_pllid, _fhid, _offset) { \
+ .data = { \
+ .pll_id = _pllid, \
+ .fh_id = _fhid, \
+ .fh_ver = FHCTL_PLLFH_V2, \
+ .fhx_offset = _offset, \
+ .dds_mask = GENMASK(21, 0), \
+ .slope0_value = 0x6003c97, \
+ .slope1_value = 0x6003c97, \
+ .sfstrx_en = BIT(2), \
+ .frddsx_en = BIT(1), \
+ .fhctlx_en = BIT(0), \
+ .tgl_org = BIT(31), \
+ .dvfs_tri = BIT(31), \
+ .pcwchg = BIT(31), \
+ .dt_val = 0x0, \
+ .df_val = 0x9, \
+ .updnlmt_shft = 16, \
+ .msk_frddsx_dys = GENMASK(23, 20), \
+ .msk_frddsx_dts = GENMASK(19, 16), \
+ }, \
+ }
+
+static struct mtk_pllfh_data pllfhs[] = {
+ FH(CLK_APMIXED_ARMPLL_LL, 0, 0x003C),
+ FH(CLK_APMIXED_ARMPLL_BL, 1, 0x0050),
+ FH(CLK_APMIXED_CCIPLL, 2, 0x0064),
+ FH(CLK_APMIXED_MAINPLL, 3, 0x0078),
+ FH(CLK_APMIXED_MMPLL, 4, 0x008C),
+ FH(CLK_APMIXED_MFGPLL, 5, 0x00A0),
+ FH(CLK_APMIXED_EMIPLL, 6, 0x00B4),
+ FH(CLK_APMIXED_TVDPLL1, 7, 0x00C8),
+ FH(CLK_APMIXED_TVDPLL2, 8, 0x00DC),
+ FH(CLK_APMIXED_MSDCPLL, 9, 0x00F0),
+ FH(CLK_APMIXED_UFSPLL, 10, 0x0104),
+ FH(CLK_APMIXED_APUPLL, 11, 0x0118),
+ FH(CLK_APMIXED_APUPLL2, 12, 0x012c),
+};
+
+static const struct of_device_id of_match_clk_mt8189_apmixed[] = {
+ { .compatible = "mediatek,mt8189-apmixedsys" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_match_clk_mt8189_apmixed);
+
+static int clk_mt8189_apmixed_probe(struct platform_device *pdev)
+{
+ int r;
+ struct clk_hw_onecell_data *clk_data;
+ struct device_node *node = pdev->dev.of_node;
+ const u8 *fhctl_node = "mediatek,mt8189-fhctl";
+
+ clk_data = mtk_alloc_clk_data(ARRAY_SIZE(apmixed_plls));
+ if (!clk_data)
+ return -ENOMEM;
+
+ fhctl_parse_dt(fhctl_node, pllfhs, ARRAY_SIZE(pllfhs));
+
+ r = mtk_clk_register_pllfhs(&pdev->dev, apmixed_plls, ARRAY_SIZE(apmixed_plls),
+ pllfhs, ARRAY_SIZE(pllfhs), clk_data);
+ if (r)
+ goto free_apmixed_data;
+
+ r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
+ if (r)
+ goto unregister_plls;
+
+ platform_set_drvdata(pdev, clk_data);
+
+ return 0;
+
+unregister_plls:
+ mtk_clk_unregister_pllfhs(apmixed_plls, ARRAY_SIZE(apmixed_plls), pllfhs,
+ ARRAY_SIZE(pllfhs), clk_data);
+free_apmixed_data:
+ mtk_free_clk_data(clk_data);
+ return r;
+}
+
+static void clk_mt8189_apmixed_remove(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct clk_hw_onecell_data *clk_data = platform_get_drvdata(pdev);
+
+ of_clk_del_provider(node);
+ mtk_clk_unregister_pllfhs(apmixed_plls, ARRAY_SIZE(apmixed_plls), pllfhs,
+ ARRAY_SIZE(pllfhs), clk_data);
+ mtk_free_clk_data(clk_data);
+}
+
+static struct platform_driver clk_mt8189_apmixed_drv = {
+ .probe = clk_mt8189_apmixed_probe,
+ .remove = clk_mt8189_apmixed_remove,
+ .driver = {
+ .name = "clk-mt8189-apmixed",
+ .of_match_table = of_match_clk_mt8189_apmixed,
+ },
+};
+module_platform_driver(clk_mt8189_apmixed_drv);
+
+MODULE_DESCRIPTION("MediaTek MT8189 apmixed clocks driver");
+MODULE_LICENSE("GPL");
--
2.55.0
^ permalink raw reply related
* [PATCH v3 07/18] dt-bindings: clock: mediatek: regroup MT8195 dt-bindings into MT8186
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Conor Dooley, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Regroup the MT8195 clock and system clock dt-bindings into MT8186 ones
to ease maintainability and have common files for several currently
supported SoC or new future ones, that have the same kind of clock
controller design.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
.../bindings/clock/mediatek,mt8186-clock.yaml | 25 +++
.../bindings/clock/mediatek,mt8186-sys-clock.yaml | 4 +
.../bindings/clock/mediatek,mt8195-clock.yaml | 239 ---------------------
.../bindings/clock/mediatek,mt8195-sys-clock.yaml | 77 -------
4 files changed, 29 insertions(+), 316 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
index b5988d122e4d..ab9f8cb7dd6e 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
@@ -78,6 +78,31 @@ properties:
- mediatek,mt8192-vdecsys_soc
- mediatek,mt8192-vdecsys
- mediatek,mt8192-vencsys
+ - mediatek,mt8195-apusys_pll
+ - mediatek,mt8195-camsys
+ - mediatek,mt8195-camsys_rawa
+ - mediatek,mt8195-camsys_yuva
+ - mediatek,mt8195-camsys_rawb
+ - mediatek,mt8195-camsys_yuvb
+ - mediatek,mt8195-camsys_mraw
+ - mediatek,mt8195-ccusys
+ - mediatek,mt8195-imgsys
+ - mediatek,mt8195-imgsys1_dip_top
+ - mediatek,mt8195-imgsys1_dip_nr
+ - mediatek,mt8195-imgsys1_wpe
+ - mediatek,mt8195-imp_iic_wrap_s
+ - mediatek,mt8195-imp_iic_wrap_w
+ - mediatek,mt8195-ipesys
+ - mediatek,mt8195-mfgcfg
+ - mediatek,mt8195-scp_adsp
+ - mediatek,mt8195-vdecsys_soc
+ - mediatek,mt8195-vdecsys
+ - mediatek,mt8195-vdecsys_core1
+ - mediatek,mt8195-vencsys
+ - mediatek,mt8195-vencsys_core1
+ - mediatek,mt8195-wpesys
+ - mediatek,mt8195-wpesys_vpp0
+ - mediatek,mt8195-wpesys_vpp1
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
index 41b8c61132e2..4a9d3eea4316 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
@@ -39,6 +39,10 @@ properties:
- mediatek,mt8192-infracfg
- mediatek,mt8192-pericfg
- mediatek,mt8192-topckgen
+ - mediatek,mt8195-apmixedsys
+ - mediatek,mt8195-infracfg_ao
+ - mediatek,mt8195-pericfg_ao
+ - mediatek,mt8195-topckgen
- const: syscon
reg:
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8195-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8195-clock.yaml
deleted file mode 100644
index 94dd29c2396c..000000000000
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8195-clock.yaml
+++ /dev/null
@@ -1,239 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/mediatek,mt8195-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: MediaTek Functional Clock Controller for MT8195
-
-maintainers:
- - Chun-Jie Chen <chun-jie.chen@mediatek.com>
-
-description:
- The clock architecture in Mediatek like below
- PLLs -->
- dividers -->
- muxes
- -->
- clock gate
-
- The devices except apusys_pll provide clock gate control in different IP blocks.
- The apusys_pll provides Plls which generated from SoC 26m for AI Processing Unit.
-
-properties:
- compatible:
- items:
- - enum:
- - mediatek,mt8195-scp_adsp
- - mediatek,mt8195-imp_iic_wrap_s
- - mediatek,mt8195-imp_iic_wrap_w
- - mediatek,mt8195-mfgcfg
- - mediatek,mt8195-wpesys
- - mediatek,mt8195-wpesys_vpp0
- - mediatek,mt8195-wpesys_vpp1
- - mediatek,mt8195-imgsys
- - mediatek,mt8195-imgsys1_dip_top
- - mediatek,mt8195-imgsys1_dip_nr
- - mediatek,mt8195-imgsys1_wpe
- - mediatek,mt8195-ipesys
- - mediatek,mt8195-camsys
- - mediatek,mt8195-camsys_rawa
- - mediatek,mt8195-camsys_yuva
- - mediatek,mt8195-camsys_rawb
- - mediatek,mt8195-camsys_yuvb
- - mediatek,mt8195-camsys_mraw
- - mediatek,mt8195-ccusys
- - mediatek,mt8195-vdecsys_soc
- - mediatek,mt8195-vdecsys
- - mediatek,mt8195-vdecsys_core1
- - mediatek,mt8195-vencsys
- - mediatek,mt8195-vencsys_core1
- - mediatek,mt8195-apusys_pll
- reg:
- maxItems: 1
-
- '#clock-cells':
- const: 1
-
-required:
- - compatible
- - reg
- - '#clock-cells'
-
-additionalProperties: false
-
-examples:
- - |
- scp_adsp: clock-controller@10720000 {
- compatible = "mediatek,mt8195-scp_adsp";
- reg = <0x10720000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- imp_iic_wrap_s: clock-controller@11d03000 {
- compatible = "mediatek,mt8195-imp_iic_wrap_s";
- reg = <0x11d03000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- imp_iic_wrap_w: clock-controller@11e05000 {
- compatible = "mediatek,mt8195-imp_iic_wrap_w";
- reg = <0x11e05000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- mfgcfg: clock-controller@13fbf000 {
- compatible = "mediatek,mt8195-mfgcfg";
- reg = <0x13fbf000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- wpesys: clock-controller@14e00000 {
- compatible = "mediatek,mt8195-wpesys";
- reg = <0x14e00000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- wpesys_vpp0: clock-controller@14e02000 {
- compatible = "mediatek,mt8195-wpesys_vpp0";
- reg = <0x14e02000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- wpesys_vpp1: clock-controller@14e03000 {
- compatible = "mediatek,mt8195-wpesys_vpp1";
- reg = <0x14e03000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- imgsys: clock-controller@15000000 {
- compatible = "mediatek,mt8195-imgsys";
- reg = <0x15000000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- imgsys1_dip_top: clock-controller@15110000 {
- compatible = "mediatek,mt8195-imgsys1_dip_top";
- reg = <0x15110000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- imgsys1_dip_nr: clock-controller@15130000 {
- compatible = "mediatek,mt8195-imgsys1_dip_nr";
- reg = <0x15130000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- imgsys1_wpe: clock-controller@15220000 {
- compatible = "mediatek,mt8195-imgsys1_wpe";
- reg = <0x15220000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- ipesys: clock-controller@15330000 {
- compatible = "mediatek,mt8195-ipesys";
- reg = <0x15330000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- camsys: clock-controller@16000000 {
- compatible = "mediatek,mt8195-camsys";
- reg = <0x16000000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- camsys_rawa: clock-controller@1604f000 {
- compatible = "mediatek,mt8195-camsys_rawa";
- reg = <0x1604f000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- camsys_yuva: clock-controller@1606f000 {
- compatible = "mediatek,mt8195-camsys_yuva";
- reg = <0x1606f000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- camsys_rawb: clock-controller@1608f000 {
- compatible = "mediatek,mt8195-camsys_rawb";
- reg = <0x1608f000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- camsys_yuvb: clock-controller@160af000 {
- compatible = "mediatek,mt8195-camsys_yuvb";
- reg = <0x160af000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- camsys_mraw: clock-controller@16140000 {
- compatible = "mediatek,mt8195-camsys_mraw";
- reg = <0x16140000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- ccusys: clock-controller@17200000 {
- compatible = "mediatek,mt8195-ccusys";
- reg = <0x17200000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- vdecsys_soc: clock-controller@1800f000 {
- compatible = "mediatek,mt8195-vdecsys_soc";
- reg = <0x1800f000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- vdecsys: clock-controller@1802f000 {
- compatible = "mediatek,mt8195-vdecsys";
- reg = <0x1802f000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- vdecsys_core1: clock-controller@1803f000 {
- compatible = "mediatek,mt8195-vdecsys_core1";
- reg = <0x1803f000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- vencsys: clock-controller@1a000000 {
- compatible = "mediatek,mt8195-vencsys";
- reg = <0x1a000000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- vencsys_core1: clock-controller@1b000000 {
- compatible = "mediatek,mt8195-vencsys_core1";
- reg = <0x1b000000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- apusys_pll: clock-controller@190f3000 {
- compatible = "mediatek,mt8195-apusys_pll";
- reg = <0x190f3000 0x1000>;
- #clock-cells = <1>;
- };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8195-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8195-sys-clock.yaml
deleted file mode 100644
index ba1b36fa0169..000000000000
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8195-sys-clock.yaml
+++ /dev/null
@@ -1,77 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/mediatek,mt8195-sys-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: MediaTek System Clock Controller for MT8195
-
-maintainers:
- - Chun-Jie Chen <chun-jie.chen@mediatek.com>
-
-description:
- The clock architecture in Mediatek like below
- PLLs -->
- dividers -->
- muxes
- -->
- clock gate
-
- The apmixedsys provides most of PLLs which generated from SoC 26m.
- The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
- The infracfg_ao and pericfg_ao provides clock gate in peripheral and infrastructure IP blocks.
-
-properties:
- compatible:
- items:
- - enum:
- - mediatek,mt8195-topckgen
- - mediatek,mt8195-infracfg_ao
- - mediatek,mt8195-apmixedsys
- - mediatek,mt8195-pericfg_ao
- - const: syscon
-
- reg:
- maxItems: 1
-
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
-required:
- - compatible
- - reg
- - '#clock-cells'
-
-additionalProperties: false
-
-examples:
- - |
- topckgen: syscon@10000000 {
- compatible = "mediatek,mt8195-topckgen", "syscon";
- reg = <0x10000000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- infracfg_ao: syscon@10001000 {
- compatible = "mediatek,mt8195-infracfg_ao", "syscon";
- reg = <0x10001000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- apmixedsys: syscon@1000c000 {
- compatible = "mediatek,mt8195-apmixedsys", "syscon";
- reg = <0x1000c000 0x1000>;
- #clock-cells = <1>;
- };
-
- - |
- pericfg_ao: syscon@11003000 {
- compatible = "mediatek,mt8195-pericfg_ao", "syscon";
- reg = <0x11003000 0x1000>;
- #clock-cells = <1>;
- };
--
2.55.0
^ permalink raw reply related
* [PATCH v3 05/18] dt-bindings: clock: mediatek: regroup MT8188 dt-bindings into MT8186
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Conor Dooley, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Regroup the MT8188 clock and system clock dt-bindings into MT8186 ones
to ease maintainability and have common files for several currently
supported SoC or new future ones, that have the same kind of clock
controller design.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
.../bindings/clock/mediatek,mt8186-clock.yaml | 50 +++++++++++-
.../bindings/clock/mediatek,mt8186-sys-clock.yaml | 6 +-
.../bindings/clock/mediatek,mt8188-clock.yaml | 93 ----------------------
.../bindings/clock/mediatek,mt8188-sys-clock.yaml | 58 --------------
4 files changed, 54 insertions(+), 153 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
index 756b937bb7c4..0bc2da60a601 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/clock/mediatek,mt8186-clock.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: MediaTek Functional Clock Controller for MT8186
+title: MediaTek Functional Clock Controller for Mediatek SoCs
maintainers:
- Chun-Jie Chen <chun-jie.chen@mediatek.com>
@@ -35,6 +35,29 @@ properties:
- mediatek,mt8186-vdecsys
- mediatek,mt8186-vencsys
- mediatek,mt8186-wpesys
+ - mediatek,mt8188-adsp-audio26m
+ - mediatek,mt8188-camsys
+ - mediatek,mt8188-camsys-rawa
+ - mediatek,mt8188-camsys-rawb
+ - mediatek,mt8188-camsys-yuva
+ - mediatek,mt8188-camsys-yuvb
+ - mediatek,mt8188-ccusys
+ - mediatek,mt8188-imgsys
+ - mediatek,mt8188-imgsys-wpe1
+ - mediatek,mt8188-imgsys-wpe2
+ - mediatek,mt8188-imgsys-wpe3
+ - mediatek,mt8188-imgsys1-dip-nr
+ - mediatek,mt8188-imgsys1-dip-top
+ - mediatek,mt8188-imp-iic-wrap-c
+ - mediatek,mt8188-imp-iic-wrap-en
+ - mediatek,mt8188-imp-iic-wrap-w
+ - mediatek,mt8188-ipesys
+ - mediatek,mt8188-mfgcfg
+ - mediatek,mt8188-vdecsys
+ - mediatek,mt8188-vdecsys-soc
+ - mediatek,mt8188-vencsys
+ - mediatek,mt8188-wpesys
+ - mediatek,mt8188-wpesys-vpp0
reg:
maxItems: 1
@@ -42,11 +65,36 @@ properties:
'#clock-cells':
const: 1
+ '#reset-cells':
+ const: 1
+
required:
- compatible
- reg
- '#clock-cells'
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - mediatek,mt8188-camsys-rawa
+ - mediatek,mt8188-camsys-rawb
+ - mediatek,mt8188-camsys-yuva
+ - mediatek,mt8188-camsys-yuvb
+ - mediatek,mt8188-imgsys-wpe1
+ - mediatek,mt8188-imgsys-wpe2
+ - mediatek,mt8188-imgsys-wpe3
+ - mediatek,mt8188-imgsys1-dip-nr
+ - mediatek,mt8188-imgsys1-dip-top
+ - mediatek,mt8188-ipesys
+ then:
+ required:
+ - '#reset-cells'
+ else:
+ properties:
+ '#reset-cells': false
+
additionalProperties: false
examples:
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
index 6733dafbde16..199eac2034f2 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/clock/mediatek,mt8186-sys-clock.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: MediaTek System Clock Controller for MT8186
+title: MediaTek System Clock Controller for Mediatek SoCs
maintainers:
- Chun-Jie Chen <chun-jie.chen@mediatek.com>
@@ -31,6 +31,10 @@ properties:
- mediatek,mt8186-infracfg_ao
- mediatek,mt8186-mcusys
- mediatek,mt8186-topckgen
+ - mediatek,mt8188-apmixedsys
+ - mediatek,mt8188-infracfg-ao
+ - mediatek,mt8188-pericfg-ao
+ - mediatek,mt8188-topckgen
- const: syscon
reg:
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml
deleted file mode 100644
index 5403242545ab..000000000000
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml
+++ /dev/null
@@ -1,93 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/mediatek,mt8188-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: MediaTek Functional Clock Controller for MT8188
-
-maintainers:
- - Garmin Chang <garmin.chang@mediatek.com>
-
-description: |
- The clock architecture in MediaTek like below
- PLLs -->
- dividers -->
- muxes
- -->
- clock gate
-
- The devices provide clock gate control in different IP blocks.
-
-properties:
- compatible:
- enum:
- - mediatek,mt8188-adsp-audio26m
- - mediatek,mt8188-camsys
- - mediatek,mt8188-camsys-rawa
- - mediatek,mt8188-camsys-rawb
- - mediatek,mt8188-camsys-yuva
- - mediatek,mt8188-camsys-yuvb
- - mediatek,mt8188-ccusys
- - mediatek,mt8188-imgsys
- - mediatek,mt8188-imgsys-wpe1
- - mediatek,mt8188-imgsys-wpe2
- - mediatek,mt8188-imgsys-wpe3
- - mediatek,mt8188-imgsys1-dip-nr
- - mediatek,mt8188-imgsys1-dip-top
- - mediatek,mt8188-imp-iic-wrap-c
- - mediatek,mt8188-imp-iic-wrap-en
- - mediatek,mt8188-imp-iic-wrap-w
- - mediatek,mt8188-ipesys
- - mediatek,mt8188-mfgcfg
- - mediatek,mt8188-vdecsys
- - mediatek,mt8188-vdecsys-soc
- - mediatek,mt8188-vencsys
- - mediatek,mt8188-wpesys
- - mediatek,mt8188-wpesys-vpp0
-
- reg:
- maxItems: 1
-
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
-required:
- - compatible
- - reg
- - '#clock-cells'
-
-allOf:
- - if:
- properties:
- compatible:
- contains:
- enum:
- - mediatek,mt8188-camsys-rawa
- - mediatek,mt8188-camsys-rawb
- - mediatek,mt8188-camsys-yuva
- - mediatek,mt8188-camsys-yuvb
- - mediatek,mt8188-imgsys-wpe1
- - mediatek,mt8188-imgsys-wpe2
- - mediatek,mt8188-imgsys-wpe3
- - mediatek,mt8188-imgsys1-dip-nr
- - mediatek,mt8188-imgsys1-dip-top
- - mediatek,mt8188-ipesys
-
- then:
- required:
- - '#reset-cells'
-
-additionalProperties: false
-
-examples:
- - |
- clock-controller@11283000 {
- compatible = "mediatek,mt8188-imp-iic-wrap-c";
- reg = <0x11283000 0x1000>;
- #clock-cells = <1>;
- };
-
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml
deleted file mode 100644
index db13d51a4903..000000000000
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml
+++ /dev/null
@@ -1,58 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/mediatek,mt8188-sys-clock.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: MediaTek System Clock Controller for MT8188
-
-maintainers:
- - Garmin Chang <garmin.chang@mediatek.com>
-
-description: |
- The clock architecture in MediaTek like below
- PLLs -->
- dividers -->
- muxes
- -->
- clock gate
-
- The apmixedsys provides most of PLLs which generated from SoC 26m.
- The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
- The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks.
- The mcusys provides mux control to select the clock source in AP MCU.
- The device nodes also provide the system control capacity for configuration.
-
-properties:
- compatible:
- items:
- - enum:
- - mediatek,mt8188-apmixedsys
- - mediatek,mt8188-infracfg-ao
- - mediatek,mt8188-pericfg-ao
- - mediatek,mt8188-topckgen
- - const: syscon
-
- reg:
- maxItems: 1
-
- '#clock-cells':
- const: 1
-
- '#reset-cells':
- const: 1
-
-required:
- - compatible
- - reg
- - '#clock-cells'
-
-additionalProperties: false
-
-examples:
- - |
- clock-controller@10000000 {
- compatible = "mediatek,mt8188-topckgen", "syscon";
- reg = <0x10000000 0x1000>;
- #clock-cells = <1>;
- };
--
2.55.0
^ permalink raw reply related
* [PATCH v3 04/18] dt-bindings: clock: mediatek: reorder MT8186 compatibles
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Conor Dooley, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
In order to prepare regrouping several Mediatek SoC clock controller
dt-bindings files into the MT8186 ones, reorder the MT8186 clock
controller compatibles so they are sorted alphanumerically.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
.../bindings/clock/mediatek,mt8186-clock.yaml | 17 +++++++++--------
.../bindings/clock/mediatek,mt8186-sys-clock.yaml | 4 ++--
2 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
index 539149c945d0..756b937bb7c4 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
@@ -23,18 +23,19 @@ properties:
compatible:
items:
- enum:
- - mediatek,mt8186-imp_iic_wrap
- - mediatek,mt8186-mfgsys
- - mediatek,mt8186-wpesys
- - mediatek,mt8186-imgsys1
- - mediatek,mt8186-imgsys2
- - mediatek,mt8186-vdecsys
- - mediatek,mt8186-vencsys
- mediatek,mt8186-camsys
- mediatek,mt8186-camsys_rawa
- mediatek,mt8186-camsys_rawb
- - mediatek,mt8186-mdpsys
+ - mediatek,mt8186-imgsys1
+ - mediatek,mt8186-imgsys2
+ - mediatek,mt8186-imp_iic_wrap
- mediatek,mt8186-ipesys
+ - mediatek,mt8186-mdpsys
+ - mediatek,mt8186-mfgsys
+ - mediatek,mt8186-vdecsys
+ - mediatek,mt8186-vencsys
+ - mediatek,mt8186-wpesys
+
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
index f8acc02cafee..6733dafbde16 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
@@ -27,10 +27,10 @@ properties:
compatible:
items:
- enum:
+ - mediatek,mt8186-apmixedsys
+ - mediatek,mt8186-infracfg_ao
- mediatek,mt8186-mcusys
- mediatek,mt8186-topckgen
- - mediatek,mt8186-infracfg_ao
- - mediatek,mt8186-apmixedsys
- const: syscon
reg:
--
2.55.0
^ permalink raw reply related
* [PATCH v3 00/18] MT8189: Add support for system and base clock controllers
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Conor Dooley, Louis-Alexis Eyraud,
Irving-CH Lin
This series is a continuation by AngeloGioacchino Del Regno and I of a
previous series ([1]), that adds the clock controller support for
the Mediatek MT8189 SoC and its variants (MT8371, MT8391).
The first major changes is the split of the series in two:
- one for all basic clock controllers including system ones (this
series)
- one for the multimedia and graphics related clock controllers (to be
send in the future)
We chose to separate the multimedia clock drivers from the base system
ones, as there is currently an unsolvable inter-dependency between the
power domains and multimedia clocks; the power domains need a
dual-stage bring-up, where only a part of the multimedia clocks are
accessible in the first power domain powerup stage, and the rest when
the second stage (SRAM enablement) is done.
The current workarounds for this issue, such as removing the is_enabled
operation from the impacted clock controllers clk_ops table or
let the multimedia power domain always on, were quickly discarded
for upstream.
The second major change is the dt-bindings patch ([2]) that got heavily
reworked, not only because of the split choice. We took the opportunity
to regroup in the MT8186 clock and system clock dt-bindings the
description of several other Mediatek SoC (MT8188, MT8192 and MT8195)
and add in them the MT8189 new ones.
The rationale is to ease maintainability and have common files for
several currently supported SoC or new future ones, that have the same
kind of clock controller design.
Finally the pending remarks from peer reviews on the v6 revision of [1]
were also taken into account and new fixes and cleanups were also
added.
A more detailed changelog between [1] and this series:
- Removed multimedia and graphics related clock controllers code and
definitions from series
- Added new dt-bindings patches to factorise existing MT8188, MT8192
and MT8195 in MT8186 clock dt-bindings
- Heavily modified the MT8189 dt-bindings to add new compatibles
in MT8186 clock dt-bindings
- Created a new dt-bindings include for the MT8189 reset controller
definitions (include/dt-bindings/reset/mediatek,mt8189-resets.h)
- Removed unnecessary `syscon` compatible fallback from MT8189 base
clock controllers
- Added missing 'mediatek,mt8189-fhctl' compatible declaration in
dt-bindings
- Modified Kconfig to COMMON_CLK_MT8189 be tristate (and not bool) to
allow all MT8189 clock controller drivers to be built as modules (it
was partial)
- Fix pll unregisters in clk_mt8189_apmixed_probe error case
- Reparent several clocks to correct 26M references in clk-mt8189-bus.c,
clk-mt8189-topckgen.c and clk-mt8189-vlpckgen.c
- Removed CLK_SET_RATE_NO_REPARENT flag from mfg_sel_mfgpll
- Rename TOPCKGEN_fmipi_csi_up26m clock to fmipi_csi_up26m to remove caps usage
- Implemented reset controllers in clk-mt8189-ufs.c
- Updated all file headers to update copyrights and add all authors
- Added all co-developed-by trailers
The series is based on linux-next tree (tag: next-20260717) and has
been tested on Mediatek Genio 520-EVK (MT8371) and 720-EVK (MT8391) boards
with board hardware enablement patch series ([3]).
[1]: https://lore.kernel.org/linux-mediatek/20260309120512.3624804-1-irving-ch.lin@mediatek.com/
[2]: https://lore.kernel.org/linux-mediatek/20260309120512.3624804-2-irving-ch.lin@mediatek.com/
[3]: https://lore.kernel.org/linux-mediatek/20260701-add-mediatek-genio-520-720-evk-v2-0-19d5da4ef984@collabora.com/
---
Changes in v3:
- Rebased on next-20260717 tag
- Add Fixes tags to patches 1, 2 and 3
- Reworded patch 8 subject and description messages
- Updated Reviewed-by and Acked-by trailers
- Link to v2: https://lore.kernel.org/r/20260709-mt8189-clocks-system-base-v2-0-2926da3db6cf@collabora.com
Changes in v2:
- Rebased on next-20260708 tag
- Added patch 1,2 and 3 to make the #clock-cells a required property in
MT8186, MT8192 and MT8195 clock controller dt-bindings
- Patch 5:
- Removed conditional blocks to check clock-cells property presence
for MT8188 clock controller compatible
- Reworded commit message to remove the note (no more applicable)
- Fixed incorrect property value in else block for #reset-cells
property check.
_ Removed from patch 9 conditional blocks to check clock-cells property
presence for MT8189 clock controller compatible
- Fixed missing MODULE_DEVICE_TABLE in patches 10, 11 and 12.
- Added devicetree series link in cover letter
- Link to v1: https://lore.kernel.org/r/20260701-mt8189-clocks-system-base-v1-0-2b048feea50a@collabora.com
---
Louis-Alexis Eyraud (18):
dt-bindings: clock: mediatek: Make '#clock-cells' required for MT8186
dt-bindings: clock: mediatek: Make '#clock-cells' required for MT8192
dt-bindings: clock: mediatek: Make '#clock-cells' required for MT8195
dt-bindings: clock: mediatek: reorder MT8186 compatibles
dt-bindings: clock: mediatek: regroup MT8188 dt-bindings into MT8186
dt-bindings: clock: mediatek: regroup MT8192 dt-bindings into MT8186
dt-bindings: clock: mediatek: regroup MT8195 dt-bindings into MT8186
dt-bindings: clock: mediatek: Add MT8189 system/base clocks and resets
clk: mediatek: Add MT8189 apmixedsys clock support
clk: mediatek: Add MT8189 topckgen clock support
clk: mediatek: Add MT8189 vlpckgen clock support
clk: mediatek: Add MT8189 vlpcfg clock support
clk: mediatek: Add MT8189 bus clock support
clk: mediatek: Add MT8189 dbgao clock support
clk: mediatek: Add MT8189 dvfsrc clock support
clk: mediatek: Add MT8189 i2c clock support
clk: mediatek: Add MT8189 scp clock support
clk: mediatek: Add MT8189 ufs clock support
.../bindings/clock/mediatek,mt8186-clock.yaml | 128 ++-
.../bindings/clock/mediatek,mt8186-fhctl.yaml | 1 +
.../bindings/clock/mediatek,mt8186-sys-clock.yaml | 24 +-
.../bindings/clock/mediatek,mt8188-clock.yaml | 93 --
.../bindings/clock/mediatek,mt8188-sys-clock.yaml | 58 --
.../bindings/clock/mediatek,mt8192-clock.yaml | 191 ----
.../bindings/clock/mediatek,mt8192-sys-clock.yaml | 68 --
.../bindings/clock/mediatek,mt8195-clock.yaml | 238 -----
.../bindings/clock/mediatek,mt8195-sys-clock.yaml | 76 --
drivers/clk/mediatek/Kconfig | 79 ++
drivers/clk/mediatek/Makefile | 8 +
drivers/clk/mediatek/clk-mt8189-apmixedsys.c | 196 ++++
drivers/clk/mediatek/clk-mt8189-bus.c | 200 ++++
drivers/clk/mediatek/clk-mt8189-dbgao.c | 98 ++
drivers/clk/mediatek/clk-mt8189-dvfsrc.c | 58 ++
drivers/clk/mediatek/clk-mt8189-iic.c | 122 +++
drivers/clk/mediatek/clk-mt8189-scp.c | 77 ++
drivers/clk/mediatek/clk-mt8189-topckgen.c | 1025 ++++++++++++++++++++
drivers/clk/mediatek/clk-mt8189-ufs.c | 133 +++
drivers/clk/mediatek/clk-mt8189-vlpcfg.c | 116 +++
drivers/clk/mediatek/clk-mt8189-vlpckgen.c | 285 ++++++
include/dt-bindings/clock/mediatek,mt8189-clk.h | 433 +++++++++
include/dt-bindings/reset/mediatek,mt8189-resets.h | 17 +
23 files changed, 2988 insertions(+), 736 deletions(-)
---
base-commit: a8a4d142e22da4ab51e4e5f7061db87dbafe1c00
change-id: 20260630-mt8189-clocks-system-base-70714e4ff2aa
Best regards,
--
Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
^ permalink raw reply
* [PATCH v3 02/18] dt-bindings: clock: mediatek: Make '#clock-cells' required for MT8192
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Conor Dooley, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Both MT8192 clock controllers dt-bindings (clock and sys-clock)
document the '#clock-cells' property but do not enforce it as required
property.
As clock provider nodes should define this property in devicetrees, add
it to the required property list in both its dt-bindings files.
Fixes: 4a803990aeb1 ("dt-bindings: ARM: Mediatek: Add new document bindings of MT8192 clock")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
Documentation/devicetree/bindings/clock/mediatek,mt8192-clock.yaml | 1 +
Documentation/devicetree/bindings/clock/mediatek,mt8192-sys-clock.yaml | 1 +
2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8192-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8192-clock.yaml
index b8d690e28bdc..65e4c2fddf5b 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8192-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8192-clock.yaml
@@ -46,6 +46,7 @@ properties:
required:
- compatible
- reg
+ - '#clock-cells'
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8192-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8192-sys-clock.yaml
index bf8c9aacdf1e..0ebd0d60e2f6 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8192-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8192-sys-clock.yaml
@@ -35,6 +35,7 @@ properties:
required:
- compatible
- reg
+ - '#clock-cells'
additionalProperties: false
--
2.55.0
^ permalink raw reply related
* [PATCH v3 03/18] dt-bindings: clock: mediatek: Make '#clock-cells' required for MT8195
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Conor Dooley, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Both MT8195 clock controllers dt-bindings (clock and sys-clock)
document the '#clock-cells' property but do not enforce it as required
property.
As clock provider nodes should define this property in devicetrees, add
it to the required property list in both its dt-bindings files.
Fixes: 34d3ed3b9a00 ("dt-bindings: ARM: Mediatek: Add new document bindings of MT8195 clock")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
Documentation/devicetree/bindings/clock/mediatek,mt8195-clock.yaml | 1 +
Documentation/devicetree/bindings/clock/mediatek,mt8195-sys-clock.yaml | 1 +
2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8195-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8195-clock.yaml
index fcc963aff087..94dd29c2396c 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8195-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8195-clock.yaml
@@ -58,6 +58,7 @@ properties:
required:
- compatible
- reg
+ - '#clock-cells'
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8195-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8195-sys-clock.yaml
index 69f096eb168d..ba1b36fa0169 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8195-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8195-sys-clock.yaml
@@ -43,6 +43,7 @@ properties:
required:
- compatible
- reg
+ - '#clock-cells'
additionalProperties: false
--
2.55.0
^ permalink raw reply related
* [PATCH v3 01/18] dt-bindings: clock: mediatek: Make '#clock-cells' required for MT8186
From: Louis-Alexis Eyraud @ 2026-07-20 10:04 UTC (permalink / raw)
To: Michael Turquette, Stephen Boyd, Brian Masney, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
AngeloGioacchino Del Regno, Chun-Jie Chen, Philipp Zabel,
Edward-JW Yang, Richard Cochran, Chen-Yu Tsai
Cc: kernel, linux-clk, devicetree, linux-kernel, linux-arm-kernel,
linux-mediatek, netdev, Conor Dooley, Louis-Alexis Eyraud
In-Reply-To: <20260720-mt8189-clocks-system-base-v3-0-8e6d99ab3ad2@collabora.com>
Both MT8186 clock controllers dt-bindings (clock and sys-clock)
document the '#clock-cells' property but do not enforce it as required
property.
As clock provider nodes should define this property in devicetrees, add
it to the required property list in both its dt-bindings files.
Fixes: f113a51aa2cf ("dt-bindings: ARM: MediaTek: Add new document bindings of MT8186 clock")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml | 1 +
Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml | 1 +
2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
index f4e58bfa504f..539149c945d0 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-clock.yaml
@@ -44,6 +44,7 @@ properties:
required:
- compatible
- reg
+ - '#clock-cells'
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
index 1c446fbc5108..f8acc02cafee 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-sys-clock.yaml
@@ -45,6 +45,7 @@ properties:
required:
- compatible
- reg
+ - '#clock-cells'
additionalProperties: false
--
2.55.0
^ permalink raw reply related
* [PATCH] perf cs-etm: Avoid truncating AUX buffer sizes to int
From: Leo Yan @ 2026-07-20 10:01 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo, Namhyung Kim, Ian Rogers, Jiri Olsa,
Suzuki K Poulose, Mike Leach, James Clark, Mathieu Poirier
Cc: coresight, linux-arm-kernel, linux-perf-users, Suyash Mahar,
Leo Yan
cs_etm__get_trace() returns an int, but it used to return etmq->buf_len
on success. That value comes from auxtrace_buffer::size, which is a
size_t. For a large AUX trace block, returning the byte count through an
int can overflow and make a valid buffer look like a negative error.
The callers do not need the actual byte count from cs_etm__get_trace().
The buffer length is already stored in the etmq->buf_len. The callers
only need to distinguish three states:
< 0: error
= 0: no more AUX buffers
> 0: data is available
Make cs_etm__get_trace() return 0 for all non-error cases and use
etmq->buf_len to indicate whether a new buffer was found. Then make
cs_etm__get_data_block() return 1 whenever data is available, instead of
returning the buffer length.
Also refactor cs_etm__get_data_block() to make its return value
semantics clearer.
Reported-by: Suyash Mahar <smahar@meta.com>
Fixes: 8224531cf5a1 ("perf cs-etm: Modularize auxtrace_buffer fetch function")
Signed-off-by: Leo Yan <leo.yan@arm.com>
---
tools/perf/util/cs-etm.c | 46 ++++++++++++++++++++++++++--------------------
1 file changed, 26 insertions(+), 20 deletions(-)
diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index 95e3ec1171acc8442d8539a72a26a1a5a53a2f37..114b3cd2da495e54e78df8fbd707898312f95079 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -1467,8 +1467,7 @@ cs_etm__get_trace(struct cs_etm_queue *etmq)
etmq->buf_used = 0;
etmq->buf_len = aux_buffer->size;
etmq->buf = aux_buffer->data;
-
- return etmq->buf_len;
+ return 0;
}
/*
@@ -2151,26 +2150,33 @@ static int cs_etm__get_data_block(struct cs_etm_queue *etmq)
{
int ret;
- if (!etmq->buf_len) {
- ret = cs_etm__get_trace(etmq);
- if (ret <= 0)
- return ret;
- /*
- * We cannot assume consecutive blocks in the data file
- * are contiguous, reset the decoder to force re-sync.
- */
- ret = cs_etm_decoder__reset(etmq->decoder);
- if (ret)
- return ret;
+ /* The current block is not finished */
+ if (etmq->buf_len)
+ return 1;
- /*
- * Since the decoder is reset, this causes a global trace
- * discontinuity. Flush all thread stacks.
- */
- cs_etm__flush_all_stack(etmq);
- }
+ ret = cs_etm__get_trace(etmq);
+ if (ret < 0)
+ return ret;
+
+ /* No more buffer to read */
+ if (!etmq->buf_len)
+ return 0;
+
+ /*
+ * We cannot assume consecutive blocks in the data file
+ * are contiguous, reset the decoder to force re-sync.
+ */
+ ret = cs_etm_decoder__reset(etmq->decoder);
+ if (ret)
+ return ret;
+
+ /*
+ * Since the decoder is reset, this causes a global trace
+ * discontinuity. Flush all thread stacks.
+ */
+ cs_etm__flush_all_stack(etmq);
- return etmq->buf_len;
+ return 1;
}
static bool cs_etm__is_svc_instr(struct cs_etm_queue *etmq,
---
base-commit: e01c7bd5b1eece254bcbf282db066b12c4815d21
change-id: 20260720-perf_cs_etm_fix_big_size-ec5608f767df
Best regards,
--
Leo Yan <leo.yan@arm.com>
^ permalink raw reply related
* [PATCH 7/7] soc: xilinx: Remove redundant dev_err()
From: Pan Chuang @ 2026-07-20 9:59 UTC (permalink / raw)
To: Michal Simek, Prasanna Kumar T S M, Pan Chuang, Marco Crivellari,
Jay Buddhabhatti, moderated list:ARM/ZYNQ ARCHITECTURE, open list
In-Reply-To: <20260720095920.542801-1-panchuang@vivo.com>
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_threaded_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
---
drivers/soc/xilinx/zynqmp_power.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/soc/xilinx/zynqmp_power.c b/drivers/soc/xilinx/zynqmp_power.c
index 370e61ac47d8..54c796afb89e 100644
--- a/drivers/soc/xilinx/zynqmp_power.c
+++ b/drivers/soc/xilinx/zynqmp_power.c
@@ -368,11 +368,8 @@ static int zynqmp_pm_probe(struct platform_device *pdev)
IRQF_NO_SUSPEND | IRQF_ONESHOT,
dev_name(&pdev->dev),
&pdev->dev);
- if (ret) {
- dev_err(&pdev->dev, "devm_request_threaded_irq '%d' failed with %d\n",
- irq, ret);
+ if (ret)
return ret;
- }
} else {
dev_err(&pdev->dev, "Required property not found in DT node\n");
return -ENOENT;
--
2.34.1
^ permalink raw reply related
* [PATCH 6/7] soc: ti: wkup_m3_ipc: Remove redundant dev_err()
From: Pan Chuang @ 2026-07-20 9:59 UTC (permalink / raw)
To: Nishanth Menon, Santosh Shilimkar,
open list:TI KEYSTONE MULTICORE NAVIGATOR DRIVERS,
moderated list:TI KEYSTONE MULTICORE NAVIGATOR DRIVERS
Cc: Pan Chuang
In-Reply-To: <20260720095920.542801-1-panchuang@vivo.com>
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
---
drivers/soc/ti/wkup_m3_ipc.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c
index 5845fc652adc..f8640cdc2a21 100644
--- a/drivers/soc/ti/wkup_m3_ipc.c
+++ b/drivers/soc/ti/wkup_m3_ipc.c
@@ -630,10 +630,8 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
ret = devm_request_irq(dev, irq, wkup_m3_txev_handler,
0, "wkup_m3_txev", m3_ipc);
- if (ret) {
- dev_err(dev, "request_irq failed\n");
+ if (ret)
return ret;
- }
m3_ipc->mbox_client.dev = dev;
m3_ipc->mbox_client.tx_done = NULL;
--
2.34.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox