* [PATCH 2/7] arm64: dts: qcom: ipq8074: add unit address to soc node
2023-04-20 6:36 [PATCH 1/7] arm64: dts: qcom: ipq6018: add unit address to soc node Krzysztof Kozlowski
@ 2023-04-20 6:36 ` Krzysztof Kozlowski
2023-04-20 10:44 ` Konrad Dybcio
2023-04-20 6:36 ` [PATCH 3/7] arm64: dts: qcom: msm8994: " Krzysztof Kozlowski
` (6 subsequent siblings)
7 siblings, 1 reply; 15+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 6:36 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
"soc" node is supposed to have unit address:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 84e715aa4310..c9d679bfc10b 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -105,7 +105,7 @@ scm {
};
};
- soc: soc {
+ soc: soc@0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges = <0 0 0 0xffffffff>;
--
2.34.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH 2/7] arm64: dts: qcom: ipq8074: add unit address to soc node
2023-04-20 6:36 ` [PATCH 2/7] arm64: dts: qcom: ipq8074: " Krzysztof Kozlowski
@ 2023-04-20 10:44 ` Konrad Dybcio
0 siblings, 0 replies; 15+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:44 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 08:36, Krzysztof Kozlowski wrote:
> "soc" node is supposed to have unit address:
>
> Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> index 84e715aa4310..c9d679bfc10b 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> @@ -105,7 +105,7 @@ scm {
> };
> };
>
> - soc: soc {
> + soc: soc@0 {
> #address-cells = <0x1>;
> #size-cells = <0x1>;
> ranges = <0 0 0 0xffffffff>;
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 3/7] arm64: dts: qcom: msm8994: add unit address to soc node
2023-04-20 6:36 [PATCH 1/7] arm64: dts: qcom: ipq6018: add unit address to soc node Krzysztof Kozlowski
2023-04-20 6:36 ` [PATCH 2/7] arm64: dts: qcom: ipq8074: " Krzysztof Kozlowski
@ 2023-04-20 6:36 ` Krzysztof Kozlowski
2023-04-20 10:44 ` Konrad Dybcio
2023-04-20 6:36 ` [PATCH 4/7] arm64: dts: qcom: msm8996: " Krzysztof Kozlowski
` (5 subsequent siblings)
7 siblings, 1 reply; 15+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 6:36 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
"soc" node is supposed to have unit address:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8994.dtsi | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 4041f3a690fe..184bdde5c78d 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -340,8 +340,7 @@ modem_smp2p_in: slave-kernel {
};
};
- soc: soc {
-
+ soc: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
--
2.34.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH 3/7] arm64: dts: qcom: msm8994: add unit address to soc node
2023-04-20 6:36 ` [PATCH 3/7] arm64: dts: qcom: msm8994: " Krzysztof Kozlowski
@ 2023-04-20 10:44 ` Konrad Dybcio
0 siblings, 0 replies; 15+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:44 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 08:36, Krzysztof Kozlowski wrote:
> "soc" node is supposed to have unit address:
>
> Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/msm8994.dtsi | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
> index 4041f3a690fe..184bdde5c78d 100644
> --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
> @@ -340,8 +340,7 @@ modem_smp2p_in: slave-kernel {
> };
> };
>
> - soc: soc {
> -
> + soc: soc@0 {
> #address-cells = <1>;
> #size-cells = <1>;
> ranges = <0 0 0 0xffffffff>;
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 4/7] arm64: dts: qcom: msm8996: add unit address to soc node
2023-04-20 6:36 [PATCH 1/7] arm64: dts: qcom: ipq6018: add unit address to soc node Krzysztof Kozlowski
2023-04-20 6:36 ` [PATCH 2/7] arm64: dts: qcom: ipq8074: " Krzysztof Kozlowski
2023-04-20 6:36 ` [PATCH 3/7] arm64: dts: qcom: msm8994: " Krzysztof Kozlowski
@ 2023-04-20 6:36 ` Krzysztof Kozlowski
2023-04-20 10:44 ` Konrad Dybcio
2023-04-20 6:36 ` [PATCH 5/7] arm64: dts: qcom: msm8998: " Krzysztof Kozlowski
` (4 subsequent siblings)
7 siblings, 1 reply; 15+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 6:36 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
"soc" node is supposed to have unit address:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f0114e4fdd37..8a40c4b0f94c 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -604,7 +604,7 @@ slpi_smp2p_in: slave-kernel {
};
};
- soc: soc {
+ soc: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
--
2.34.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH 4/7] arm64: dts: qcom: msm8996: add unit address to soc node
2023-04-20 6:36 ` [PATCH 4/7] arm64: dts: qcom: msm8996: " Krzysztof Kozlowski
@ 2023-04-20 10:44 ` Konrad Dybcio
0 siblings, 0 replies; 15+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:44 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 08:36, Krzysztof Kozlowski wrote:
> "soc" node is supposed to have unit address:
>
> Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index f0114e4fdd37..8a40c4b0f94c 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -604,7 +604,7 @@ slpi_smp2p_in: slave-kernel {
> };
> };
>
> - soc: soc {
> + soc: soc@0 {
> #address-cells = <1>;
> #size-cells = <1>;
> ranges = <0 0 0 0xffffffff>;
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 5/7] arm64: dts: qcom: msm8998: add unit address to soc node
2023-04-20 6:36 [PATCH 1/7] arm64: dts: qcom: ipq6018: add unit address to soc node Krzysztof Kozlowski
` (2 preceding siblings ...)
2023-04-20 6:36 ` [PATCH 4/7] arm64: dts: qcom: msm8996: " Krzysztof Kozlowski
@ 2023-04-20 6:36 ` Krzysztof Kozlowski
2023-04-20 10:44 ` Konrad Dybcio
2023-04-20 6:36 ` [PATCH 6/7] arm64: dts: qcom: sdm630: " Krzysztof Kozlowski
` (3 subsequent siblings)
7 siblings, 1 reply; 15+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 6:36 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
"soc" node is supposed to have unit address:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index b150437a8355..803a1f1f2597 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -800,7 +800,7 @@ timer {
<GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
};
- soc: soc {
+ soc: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
--
2.34.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH 5/7] arm64: dts: qcom: msm8998: add unit address to soc node
2023-04-20 6:36 ` [PATCH 5/7] arm64: dts: qcom: msm8998: " Krzysztof Kozlowski
@ 2023-04-20 10:44 ` Konrad Dybcio
0 siblings, 0 replies; 15+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:44 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 08:36, Krzysztof Kozlowski wrote:
> "soc" node is supposed to have unit address:
>
> Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> index b150437a8355..803a1f1f2597 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> @@ -800,7 +800,7 @@ timer {
> <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
> };
>
> - soc: soc {
> + soc: soc@0 {
> #address-cells = <1>;
> #size-cells = <1>;
> ranges = <0 0 0 0xffffffff>;
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 6/7] arm64: dts: qcom: sdm630: add unit address to soc node
2023-04-20 6:36 [PATCH 1/7] arm64: dts: qcom: ipq6018: add unit address to soc node Krzysztof Kozlowski
` (3 preceding siblings ...)
2023-04-20 6:36 ` [PATCH 5/7] arm64: dts: qcom: msm8998: " Krzysztof Kozlowski
@ 2023-04-20 6:36 ` Krzysztof Kozlowski
2023-04-20 10:44 ` Konrad Dybcio
2023-04-20 6:36 ` [PATCH 7/7] arm64: dts: qcom: sm6125: " Krzysztof Kozlowski
` (2 subsequent siblings)
7 siblings, 1 reply; 15+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 6:36 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
"soc" node is supposed to have unit address:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm630.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index b31424544b19..a7d475f23bea 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -548,7 +548,7 @@ modem_smp2p_in: slave-kernel {
};
};
- soc {
+ soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
--
2.34.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH 6/7] arm64: dts: qcom: sdm630: add unit address to soc node
2023-04-20 6:36 ` [PATCH 6/7] arm64: dts: qcom: sdm630: " Krzysztof Kozlowski
@ 2023-04-20 10:44 ` Konrad Dybcio
0 siblings, 0 replies; 15+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:44 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 08:36, Krzysztof Kozlowski wrote:
> "soc" node is supposed to have unit address:
>
> Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/sdm630.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> index b31424544b19..a7d475f23bea 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -548,7 +548,7 @@ modem_smp2p_in: slave-kernel {
> };
> };
>
> - soc {
> + soc@0 {
> #address-cells = <1>;
> #size-cells = <1>;
> ranges = <0 0 0 0xffffffff>;
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 7/7] arm64: dts: qcom: sm6125: add unit address to soc node
2023-04-20 6:36 [PATCH 1/7] arm64: dts: qcom: ipq6018: add unit address to soc node Krzysztof Kozlowski
` (4 preceding siblings ...)
2023-04-20 6:36 ` [PATCH 6/7] arm64: dts: qcom: sdm630: " Krzysztof Kozlowski
@ 2023-04-20 6:36 ` Krzysztof Kozlowski
2023-04-20 10:45 ` Konrad Dybcio
2023-04-20 10:44 ` [PATCH 1/7] arm64: dts: qcom: ipq6018: " Konrad Dybcio
2023-05-25 4:54 ` (subset) " Bjorn Andersson
7 siblings, 1 reply; 15+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-20 6:36 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
"soc" node is supposed to have unit address:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sm6125.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 9484752fb850..745874a82a49 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -364,7 +364,7 @@ smem: smem {
hwlocks = <&tcsr_mutex 3>;
};
- soc {
+ soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00 0x00 0x00 0xffffffff>;
--
2.34.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH 7/7] arm64: dts: qcom: sm6125: add unit address to soc node
2023-04-20 6:36 ` [PATCH 7/7] arm64: dts: qcom: sm6125: " Krzysztof Kozlowski
@ 2023-04-20 10:45 ` Konrad Dybcio
0 siblings, 0 replies; 15+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:45 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 08:36, Krzysztof Kozlowski wrote:
> "soc" node is supposed to have unit address:
>
> Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/sm6125.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> index 9484752fb850..745874a82a49 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> @@ -364,7 +364,7 @@ smem: smem {
> hwlocks = <&tcsr_mutex 3>;
> };
>
> - soc {
> + soc@0 {
> #address-cells = <1>;
> #size-cells = <1>;
> ranges = <0x00 0x00 0x00 0xffffffff>;
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/7] arm64: dts: qcom: ipq6018: add unit address to soc node
2023-04-20 6:36 [PATCH 1/7] arm64: dts: qcom: ipq6018: add unit address to soc node Krzysztof Kozlowski
` (5 preceding siblings ...)
2023-04-20 6:36 ` [PATCH 7/7] arm64: dts: qcom: sm6125: " Krzysztof Kozlowski
@ 2023-04-20 10:44 ` Konrad Dybcio
2023-05-25 4:54 ` (subset) " Bjorn Andersson
7 siblings, 0 replies; 15+ messages in thread
From: Konrad Dybcio @ 2023-04-20 10:44 UTC (permalink / raw)
To: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel
On 20.04.2023 08:36, Krzysztof Kozlowski wrote:
> "soc" node is supposed to have unit address:
>
> Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> index 8ec9e282b412..e4267a6ec9a5 100644
> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> @@ -198,7 +198,7 @@ smem {
> hwlocks = <&tcsr_mutex 0>;
> };
>
> - soc: soc {
> + soc: soc@0 {
> #address-cells = <2>;
> #size-cells = <2>;
> ranges = <0 0 0 0 0x0 0xffffffff>;
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: (subset) [PATCH 1/7] arm64: dts: qcom: ipq6018: add unit address to soc node
2023-04-20 6:36 [PATCH 1/7] arm64: dts: qcom: ipq6018: add unit address to soc node Krzysztof Kozlowski
` (6 preceding siblings ...)
2023-04-20 10:44 ` [PATCH 1/7] arm64: dts: qcom: ipq6018: " Konrad Dybcio
@ 2023-05-25 4:54 ` Bjorn Andersson
7 siblings, 0 replies; 15+ messages in thread
From: Bjorn Andersson @ 2023-05-25 4:54 UTC (permalink / raw)
To: Krzysztof Kozlowski, linux-kernel, linux-arm-msm, Konrad Dybcio,
devicetree, Krzysztof Kozlowski, Rob Herring, Andy Gross
On Thu, 20 Apr 2023 08:36:04 +0200, Krzysztof Kozlowski wrote:
> "soc" node is supposed to have unit address:
>
> Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
>
>
Applied, thanks!
[1/7] arm64: dts: qcom: ipq6018: add unit address to soc node
commit: 393595d4ffbd0a1fafd5548f8de1b8487a037cf2
[2/7] arm64: dts: qcom: ipq8074: add unit address to soc node
commit: da6aa1111a17db11367817ddc10c5a6c188cdc44
[3/7] arm64: dts: qcom: msm8994: add unit address to soc node
commit: f7fd546dd693f64404bbbdc154b3dac0aee1f3bb
[4/7] arm64: dts: qcom: msm8996: add unit address to soc node
commit: b67f5c337f894109a8a9c40f7dbb74de9cf07d57
[5/7] arm64: dts: qcom: msm8998: add unit address to soc node
commit: 77462beddbfc700d36fe1f24d77b545fe3d6db44
[6/7] arm64: dts: qcom: sdm630: add unit address to soc node
commit: cefb40777a6c695e754d918cf5a5551169e40965
[7/7] arm64: dts: qcom: sm6125: add unit address to soc node
commit: 188e26bc67896cb89aca0821b366833e9abf829e
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 15+ messages in thread