* [PATCH v1] arm64: dts: qcom: hamoa-iot-som: Add firmware-name to QUPv3 nodes
@ 2026-03-27 8:53 Xueyao An
2026-03-27 11:09 ` Konrad Dybcio
2026-03-27 15:21 ` Abel Vesa
0 siblings, 2 replies; 7+ messages in thread
From: Xueyao An @ 2026-03-27 8:53 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel
Traditionally, firmware loading for Serial Engines (SE) in the QUP hardware
of Qualcomm SoCs has been managed by TrustZone (TZ). While this approach
ensures secure SE assignment and access control, it limits flexibility for
developers who need to enable various protocols on different SEs.
Add the firmware-name property to QUPv3 nodes in the device tree to enable
firmware loading from the Linux environment. Handle SE assignments and
access control permissions directly within Linux, removing the dependency
on TrustZone.
Signed-off-by: Xueyao An <xueyao.an@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
index 1a9e930c0496..c26eaf187b17 100644
--- a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
@@ -458,14 +458,20 @@ &pcie6a_phy {
};
&qupv3_0 {
+ firmware-name = "qcom/x1e80100/qupv3fw.elf";
+
status = "okay";
};
&qupv3_1 {
+ firmware-name = "qcom/x1e80100/qupv3fw.elf";
+
status = "okay";
};
&qupv3_2 {
+ firmware-name = "qcom/x1e80100/qupv3fw.elf";
+
status = "okay";
};
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v1] arm64: dts: qcom: hamoa-iot-som: Add firmware-name to QUPv3 nodes
2026-03-27 8:53 [PATCH v1] arm64: dts: qcom: hamoa-iot-som: Add firmware-name to QUPv3 nodes Xueyao An
@ 2026-03-27 11:09 ` Konrad Dybcio
2026-03-27 15:21 ` Abel Vesa
1 sibling, 0 replies; 7+ messages in thread
From: Konrad Dybcio @ 2026-03-27 11:09 UTC (permalink / raw)
To: Xueyao An, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel
On 3/27/26 9:53 AM, Xueyao An wrote:
> Traditionally, firmware loading for Serial Engines (SE) in the QUP hardware
> of Qualcomm SoCs has been managed by TrustZone (TZ). While this approach
> ensures secure SE assignment and access control, it limits flexibility for
> developers who need to enable various protocols on different SEs.
>
> Add the firmware-name property to QUPv3 nodes in the device tree to enable
> firmware loading from the Linux environment. Handle SE assignments and
> access control permissions directly within Linux, removing the dependency
> on TrustZone.
>
> Signed-off-by: Xueyao An <xueyao.an@oss.qualcomm.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Konrad
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v1] arm64: dts: qcom: hamoa-iot-som: Add firmware-name to QUPv3 nodes
2026-03-27 8:53 [PATCH v1] arm64: dts: qcom: hamoa-iot-som: Add firmware-name to QUPv3 nodes Xueyao An
2026-03-27 11:09 ` Konrad Dybcio
@ 2026-03-27 15:21 ` Abel Vesa
2026-03-30 5:31 ` Xueyao An
1 sibling, 1 reply; 7+ messages in thread
From: Abel Vesa @ 2026-03-27 15:21 UTC (permalink / raw)
To: Xueyao An
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel
On 26-03-27 16:53:17, Xueyao An wrote:
> Traditionally, firmware loading for Serial Engines (SE) in the QUP hardware
> of Qualcomm SoCs has been managed by TrustZone (TZ). While this approach
> ensures secure SE assignment and access control, it limits flexibility for
> developers who need to enable various protocols on different SEs.
>
> Add the firmware-name property to QUPv3 nodes in the device tree to enable
> firmware loading from the Linux environment. Handle SE assignments and
> access control permissions directly within Linux, removing the dependency
> on TrustZone.
>
> Signed-off-by: Xueyao An <xueyao.an@oss.qualcomm.com>
Hopefully, there is a DT binding schema update that goes with this...
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v1] arm64: dts: qcom: hamoa-iot-som: Add firmware-name to QUPv3 nodes
2026-03-27 15:21 ` Abel Vesa
@ 2026-03-30 5:31 ` Xueyao An
0 siblings, 0 replies; 7+ messages in thread
From: Xueyao An @ 2026-03-30 5:31 UTC (permalink / raw)
To: Abel Vesa
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel
I sincerely apologize for the confusion and any inconvenience caused.
This patch has already been upstreamed, so please kindly ignore it.
Thank you very much for your understanding, and sorry again for the
oversight.
在 2026/3/27 23:21, Abel Vesa 写道:
> On 26-03-27 16:53:17, Xueyao An wrote:
>> Traditionally, firmware loading for Serial Engines (SE) in the QUP hardware
>> of Qualcomm SoCs has been managed by TrustZone (TZ). While this approach
>> ensures secure SE assignment and access control, it limits flexibility for
>> developers who need to enable various protocols on different SEs.
>>
>> Add the firmware-name property to QUPv3 nodes in the device tree to enable
>> firmware loading from the Linux environment. Handle SE assignments and
>> access control permissions directly within Linux, removing the dependency
>> on TrustZone.
>>
>> Signed-off-by: Xueyao An <xueyao.an@oss.qualcomm.com>
> Hopefully, there is a DT binding schema update that goes with this...
>
> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v1] arm64: dts: qcom: hamoa-iot-som: Add firmware-name to QUPv3 nodes
@ 2026-02-12 8:25 Xueyao An
2026-02-12 9:40 ` Konrad Dybcio
2026-03-18 13:50 ` Bjorn Andersson
0 siblings, 2 replies; 7+ messages in thread
From: Xueyao An @ 2026-02-12 8:25 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel
Traditionally, firmware loading for Serial Engines (SE) in the QUP hardware
of Qualcomm SoCs has been managed by TrustZone (TZ). While this approach
ensures secure SE assignment and access control, it limits flexibility for
developers who need to enable various protocols on different SEs.
Add the firmware-name property to QUPv3 nodes in the device tree to enable
firmware loading from the Linux environment. Handle SE assignments and
access control permissions directly within Linux, removing the dependency
on TrustZone.
Signed-off-by: Xueyao An <xueyao.an@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
index 1a9e930c0496..c26eaf187b17 100644
--- a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
@@ -458,14 +458,20 @@ &pcie6a_phy {
};
&qupv3_0 {
+ firmware-name = "qcom/x1e80100/qupv3fw.elf";
+
status = "okay";
};
&qupv3_1 {
+ firmware-name = "qcom/x1e80100/qupv3fw.elf";
+
status = "okay";
};
&qupv3_2 {
+ firmware-name = "qcom/x1e80100/qupv3fw.elf";
+
status = "okay";
};
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v1] arm64: dts: qcom: hamoa-iot-som: Add firmware-name to QUPv3 nodes
2026-02-12 8:25 Xueyao An
@ 2026-02-12 9:40 ` Konrad Dybcio
2026-03-18 13:50 ` Bjorn Andersson
1 sibling, 0 replies; 7+ messages in thread
From: Konrad Dybcio @ 2026-02-12 9:40 UTC (permalink / raw)
To: Xueyao An, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel
On 2/12/26 9:25 AM, Xueyao An wrote:
> Traditionally, firmware loading for Serial Engines (SE) in the QUP hardware
> of Qualcomm SoCs has been managed by TrustZone (TZ). While this approach
> ensures secure SE assignment and access control, it limits flexibility for
> developers who need to enable various protocols on different SEs.
>
> Add the firmware-name property to QUPv3 nodes in the device tree to enable
> firmware loading from the Linux environment. Handle SE assignments and
> access control permissions directly within Linux, removing the dependency
> on TrustZone.
>
> Signed-off-by: Xueyao An <xueyao.an@oss.qualcomm.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Konrad
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v1] arm64: dts: qcom: hamoa-iot-som: Add firmware-name to QUPv3 nodes
2026-02-12 8:25 Xueyao An
2026-02-12 9:40 ` Konrad Dybcio
@ 2026-03-18 13:50 ` Bjorn Andersson
1 sibling, 0 replies; 7+ messages in thread
From: Bjorn Andersson @ 2026-03-18 13:50 UTC (permalink / raw)
To: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Xueyao An
Cc: linux-arm-msm, devicetree, linux-kernel
On Thu, 12 Feb 2026 16:25:57 +0800, Xueyao An wrote:
> Traditionally, firmware loading for Serial Engines (SE) in the QUP hardware
> of Qualcomm SoCs has been managed by TrustZone (TZ). While this approach
> ensures secure SE assignment and access control, it limits flexibility for
> developers who need to enable various protocols on different SEs.
>
> Add the firmware-name property to QUPv3 nodes in the device tree to enable
> firmware loading from the Linux environment. Handle SE assignments and
> access control permissions directly within Linux, removing the dependency
> on TrustZone.
>
> [...]
Applied, thanks!
[1/1] arm64: dts: qcom: hamoa-iot-som: Add firmware-name to QUPv3 nodes
commit: 2f50108a6c04e0a68ee82a54f2d209d9c7551002
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2026-03-30 5:31 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-03-27 8:53 [PATCH v1] arm64: dts: qcom: hamoa-iot-som: Add firmware-name to QUPv3 nodes Xueyao An
2026-03-27 11:09 ` Konrad Dybcio
2026-03-27 15:21 ` Abel Vesa
2026-03-30 5:31 ` Xueyao An
-- strict thread matches above, loose matches on Subject: below --
2026-02-12 8:25 Xueyao An
2026-02-12 9:40 ` Konrad Dybcio
2026-03-18 13:50 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox