From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: Marc Gonzalez <mgonzalez@freebox.fr>,
Vikash Garodia <quic_vgarodia@quicinc.com>,
Stanimir Varbanov <stanimir.k.varbanov@gmail.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-media <linux-media@vger.kernel.org>,
MSM <linux-arm-msm@vger.kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Jeffrey Hugo <quic_jhugo@quicinc.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Pierre-Hugues Husson <phh@phh.me>,
Marijn Suijten <marijn.suijten@somainline.org>
Subject: Re: [RFC WIP PATCH] venus: add qcom,no-low-power property
Date: Tue, 9 Apr 2024 12:27:40 +0100 [thread overview]
Message-ID: <09bc9231-0e59-4cb2-a05f-02e2fcaf3d15@linaro.org> (raw)
In-Reply-To: <c2ce34ce-d532-4039-bb9f-d4d1b2fb23b0@freebox.fr>
On 08/04/2024 16:39, Marc Gonzalez wrote:
> On 29/02/2024 16:32, Vikash Garodia wrote:
>
>> Not completely sure on these configurations, but certainly both the
>> video_subcore0_gdsc and video_subcore1_gdsc should be configured in hardware
>> control mode in the gdsc configuration.
>
> Hello,
>
> Still trying to land support for venus decoder on msm8998 in mainline.
>
> This is the patch I have at the moment:
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> index 4dfe2d09ac285..67b8374ddf02f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> @@ -3010,6 +3010,55 @@ mdss_dsi1_phy: phy@c996400 {
> };
> };
>
> + venus: video-codec@cc00000 {
> + compatible = "qcom,msm8998-venus";
> + reg = <0x0cc00000 0xff000>;
> + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
> + power-domains = <&mmcc VIDEO_TOP_GDSC>;
> + clocks = <&mmcc VIDEO_CORE_CLK>,
> + <&mmcc VIDEO_AHB_CLK>,
> + <&mmcc VIDEO_AXI_CLK>,
> + <&mmcc VIDEO_MAXI_CLK>;
> + clock-names = "core", "iface", "bus", "mbus";
> + iommus = <&mmss_smmu 0x400>,
> + <&mmss_smmu 0x401>,
> + <&mmss_smmu 0x40a>,
> + <&mmss_smmu 0x407>,
> + <&mmss_smmu 0x40e>,
> + <&mmss_smmu 0x40f>,
> + <&mmss_smmu 0x408>,
> + <&mmss_smmu 0x409>,
> + <&mmss_smmu 0x40b>,
> + <&mmss_smmu 0x40c>,
> + <&mmss_smmu 0x40d>,
> + <&mmss_smmu 0x410>,
> + <&mmss_smmu 0x411>,
> + <&mmss_smmu 0x421>,
> + <&mmss_smmu 0x428>,
> + <&mmss_smmu 0x429>,
> + <&mmss_smmu 0x42b>,
> + <&mmss_smmu 0x42c>,
> + <&mmss_smmu 0x42d>,
> + <&mmss_smmu 0x411>,
> + <&mmss_smmu 0x431>;
> + memory-region = <&venus_mem>;
> + status = "disabled";
> +
> + video-decoder {
> + compatible = "venus-decoder";
> + clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
> + clock-names = "core";
> + power-domains = <&mmcc VIDEO_SUBCORE0_GDSC>;
> + };
> +
> + video-encoder {
> + compatible = "venus-encoder";
> + clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
> + clock-names = "core";
> + power-domains = <&mmcc VIDEO_SUBCORE1_GDSC>;
> + };
> + };
> +
> mmss_smmu: iommu@cd00000 {
> compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
> reg = <0x0cd00000 0x40000>;
> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
> index ce206b7097541..42e0c580e093d 100644
> --- a/drivers/media/platform/qcom/venus/core.c
> +++ b/drivers/media/platform/qcom/venus/core.c
> @@ -587,6 +587,47 @@ static const struct venus_resources msm8996_res = {
> .fwname = "qcom/venus-4.2/venus.mbn",
> };
>
> +static const struct freq_tbl msm8998_freq_table[] = {
> + { 1944000, 520000000 }, /* 4k UHD @ 60 (decode only) */
> + { 972000, 520000000 }, /* 4k UHD @ 30 */
> + { 489600, 346666667 }, /* 1080p @ 60 */
> + { 244800, 150000000 }, /* 1080p @ 30 */
> + { 108000, 75000000 }, /* 720p @ 30 */
> +};
> +
> +/*
> + * https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/arch/arm/boot/dts/qcom/msm8998-vidc.dtsi
> + */
> +static const struct reg_val msm8998_reg_preset[] = {
> + { 0x80124, 0x00000003 },
> + { 0x80550, 0x01111111 },
> + { 0x80560, 0x01111111 },
> + { 0x80568, 0x01111111 },
> + { 0x80570, 0x01111111 },
> + { 0x80580, 0x01111111 },
> + { 0x80588, 0x01111111 },
> + { 0xe2010, 0x00000000 },
> +};
> +
> +static const struct venus_resources msm8998_res = {
> + .freq_tbl = msm8998_freq_table,
> + .freq_tbl_size = ARRAY_SIZE(msm8998_freq_table),
> + .reg_tbl = msm8998_reg_preset,
> + .reg_tbl_size = ARRAY_SIZE(msm8998_reg_preset),
> + .clks = { "core", "iface", "bus", "mbus" },
> + .clks_num = 4,
> + .vcodec0_clks = { "core" },
> + .vcodec1_clks = { "core" },
> + .vcodec_clks_num = 1,
> + .max_load = 2563200,
> + .hfi_version = HFI_VERSION_3XX,
> + .vmem_id = VIDC_RESOURCE_NONE,
> + .vmem_size = 0,
> + .vmem_addr = 0,
> + .dma_mask = 0xddc00000 - 1,
> + .fwname = "qcom/venus-4.4/venus.mbn",
> +};
> +
> static const struct freq_tbl sdm660_freq_table[] = {
> { 979200, 518400000 },
> { 489600, 441600000 },
> @@ -893,6 +934,7 @@ static const struct venus_resources sc7280_res = {
> static const struct of_device_id venus_dt_match[] = {
> { .compatible = "qcom,msm8916-venus", .data = &msm8916_res, },
> { .compatible = "qcom,msm8996-venus", .data = &msm8996_res, },
> + { .compatible = "qcom,msm8998-venus", .data = &msm8998_res, },
> { .compatible = "qcom,sdm660-venus", .data = &sdm660_res, },
> { .compatible = "qcom,sdm845-venus", .data = &sdm845_res, },
> { .compatible = "qcom,sdm845-venus-v2", .data = &sdm845_res_v2, },
> diff --git a/drivers/media/platform/qcom/venus/hfi_venus.c b/drivers/media/platform/qcom/venus/hfi_venus.c
> index f9437b6412b91..abdc578ce988e 100644
> --- a/drivers/media/platform/qcom/venus/hfi_venus.c
> +++ b/drivers/media/platform/qcom/venus/hfi_venus.c
> @@ -945,6 +945,7 @@ static int venus_sys_set_default_properties(struct venus_hfi_device *hdev)
> dev_warn(dev, "setting idle response ON failed (%d)\n", ret);
> }
>
> + venus_fw_low_power_mode = false;
So instead of this workaround, @Vikash is asking for HW_CTRL similar to
what we have in 8996
8996 has a top-level "magic" GDSC which 8998 doesn't appear to have.
I think the CXC stuff would still be valid.
diff --git a/drivers/clk/qcom/mmcc-msm8998.c
b/drivers/clk/qcom/mmcc-msm8998.c
index 1180e48c687ac..275fb3b71ede4 100644
--- a/drivers/clk/qcom/mmcc-msm8998.c
+++ b/drivers/clk/qcom/mmcc-msm8998.c
@@ -2535,6 +2535,8 @@ static struct clk_branch vmem_ahb_clk = {
static struct gdsc video_top_gdsc = {
.gdscr = 0x1024,
+ .cxcs = (unsigned int []){ 0x1028, 0x1034, 0x1038 },
+ .cxc_count = 3,
.pd = {
.name = "video_top",
},
@@ -2543,20 +2545,26 @@ static struct gdsc video_top_gdsc = {
static struct gdsc video_subcore0_gdsc = {
.gdscr = 0x1040,
+ .cxcs = (unsigned int []){ 0x1048 },
+ .cxc_count = 1,
.pd = {
.name = "video_subcore0",
},
.parent = &video_top_gdsc.pd,
.pwrsts = PWRSTS_OFF_ON,
+ .flags = HW_CTRL,
};
static struct gdsc video_subcore1_gdsc = {
.gdscr = 0x1044,
+ .cxcs = (unsigned int []){ 0x104c },
+ .cxc_count = 1,
.pd = {
.name = "video_subcore1",
},
.parent = &video_top_gdsc.pd,
.pwrsts = PWRSTS_OFF_ON,
+ .flags = HW_CTRL,
};
Can you give it a try ?
---
bod
next prev parent reply other threads:[~2024-04-09 11:27 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-19 17:18 [RFC WIP PATCH] venus: add qcom,no-low-power property Marc Gonzalez
2024-02-19 17:28 ` Konrad Dybcio
2024-02-19 17:44 ` Dmitry Baryshkov
2024-02-19 19:24 ` Bryan O'Donoghue
2024-02-20 10:56 ` Marc Gonzalez
2024-02-20 11:21 ` Bryan O'Donoghue
2024-02-20 11:37 ` Krzysztof Kozlowski
2024-02-20 12:34 ` Marc Gonzalez
2024-02-20 13:27 ` Krzysztof Kozlowski
2024-02-20 13:53 ` Vikash Garodia
2024-02-20 14:45 ` Marc Gonzalez
2024-02-23 13:48 ` Vikash Garodia
2024-02-26 13:09 ` Marc Gonzalez
2024-02-26 14:30 ` Vikash Garodia
2024-02-26 15:55 ` Marc Gonzalez
2024-02-27 6:55 ` Vikash Garodia
2024-02-27 16:11 ` Marc Gonzalez
2024-02-29 15:32 ` Vikash Garodia
2024-02-29 16:24 ` Marc Gonzalez
2024-02-29 16:47 ` Jeffrey Hugo
2024-03-12 18:39 ` Konrad Dybcio
2024-04-10 10:24 ` Vikash Garodia
2024-04-08 15:39 ` Marc Gonzalez
2024-04-09 11:27 ` Bryan O'Donoghue [this message]
2024-04-09 14:09 ` Marc Gonzalez
2024-04-09 16:53 ` Marc Gonzalez
2024-04-10 8:17 ` Bryan O'Donoghue
2024-04-10 10:34 ` Vikash Garodia
2024-04-10 12:23 ` Marc Gonzalez
2024-04-10 13:14 ` Bryan O'Donoghue
2024-04-10 13:18 ` Marc Gonzalez
2024-04-10 13:29 ` Bryan O'Donoghue
2024-04-10 13:31 ` Bryan O'Donoghue
2024-04-11 9:02 ` Bryan O'Donoghue
2024-04-25 16:43 ` Marc Gonzalez
2024-04-30 16:13 ` venus decoder hangs at EOF Marc Gonzalez
2024-02-19 18:33 ` [RFC WIP PATCH] venus: add qcom,no-low-power property Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=09bc9231-0e59-4cb2-a05f-02e2fcaf3d15@linaro.org \
--to=bryan.odonoghue@linaro.org \
--cc=andersson@kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=mchehab@kernel.org \
--cc=mgonzalez@freebox.fr \
--cc=phh@phh.me \
--cc=quic_jhugo@quicinc.com \
--cc=quic_vgarodia@quicinc.com \
--cc=stanimir.k.varbanov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox